Maintenance Technician jobs at Steel Partners Holdings - 892 jobs

The Maintenance Technician independently performs a wide variety of general maintenance repairs relating to an assigned portfolio of commercial properties. Represents the company in a professional manner to customers, vendors and the general public. Is a team player and works with co-workers for the good of Highwoods. Participates in and follows the guidelines of Highwoods Safety Program. Work Performed Responsible for the overall maintenance of building, utility systems and building equipment Perform routine building inspections according to company policy Install and repair new and existing plumbing fixtures drain lines and accessories Perform periodic testing, servicing, and recording results of cross connection devices Perform preventive maintenance, installation and repair of water pipes, controls, and associated equipment Perform minor repair of heating, ventilation, and air condition equipment including some filter changing Monitor water chemical treatment programs for cooling towers and fountains Monitor customer space temperatures and adjust thermostats when needed Assist the HVAC technician with any building related mechanical or maintenance issues when required Investigate and monitor repeat customer-related calls and report them to the Maintenance Manager and Property Manager Perform minor leak repairs to roof, window, and fountains Assist contractors with life safety alarm systems and water-based or dry fire protection systems shut downs and testing. Install and repair ceiling tiles, wall coverings, vinyl tile, carpet, cove base, window blinds, signage, etc. Be responsible for accurate and timely record keeping and reporting Assist in snow and ice removal using hand tools, ice melt, and sand Job Requirements Documented training/certification/license in one or more of the following fields: Plumbing Mechanical Roofing Be available for emergency calls at night, weekends and holidays on a rotating schedule, outlined in the on-call schedule. Fundamental knowledge of state and local building codes Maintain a current Driver's License Education A minimum of 2 years of education from one of the following: State, county or local governmental agency EPA Certification Approved/sanctioned Technical Institution and/or College or University In one or more of the following fields: Construction Roofing Building Life Safety Systems Plumbing Carpentry Mechanical OR Equivalent on-the-job training in one or more of the above listed fields consisting of a minimum of six consecutive months 3 or more years of general industrial or commercial maintenance experience. Work Environment While performing the duties of this job, the employee may be exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme outdoor conditions (cold/hot weather, wind, precipitation). The noise level in the work environment and job sites can be loud. Must be comfortable working on the roofs of office buildings and climbing ladders. Physical Demands The physical demand described here are representative of those required by and employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear; this position is active and requires the employee to stand, walk, balance, bend, kneel, stoop, crouch, crawl, and climb. The employee must use hands and handle or feel; grasp and reach with hands and arms - must be able to work frequently with arms extended above head. The employee must occasionally lift, push or pull up to 50-pound items. Specific visual acuity required by the job include close, distance, color, peripheral vision and depth perception. The ability to read, understand, and to communicate information and ideas clearly in writing and orally is required.

At Highwoods, our focus is on providing exceptional experiences for everyone involved - our customers, employees, stakeholders, and our local communities. We believe in enhancing the customer experience within our buildings by integrating hospitality and top-notch amenities, creating a truly unmatched work environment. A Day in the Life As a Highwoods Maintenance Technician, you will be part of a team that strives to provide best-in-class service to customers in our full-service commercial office buildings in the Tampa Market. We're seeking someone passionate about providing exceptional service, and fostering a sense of community for our diverse customer base within the portfolio. The Maintenance Technician will independently perform a wide variety of general maintenance repairs relating to an assigned portfolio of commercial properties and complete appropriate documentation in a timely manner. Responsibilities also include an emphasis on the operations, maintenance, repairs, and updates of the Building HVAC system. Leverage customer relations opportunities to promote open communication and trust between Highwoods and our customers; represent Highwoods in a professional manner to our customers, vendors, and visitors; participate in and follow the guidelines of the safety program. Responsibilities also include an emphasis on the operations, maintenance, repairs, and updates of the Building HVAC system. KEY RESPONSIBILITIES: Maintenance Technician will work closely with the Maintenance Manager who will coordinate many procedures for the Property Managers and the Director of Asset Management Become proficient with the on-line service request system including hand held application Responsible for the overall maintenance of building and building equipment Perform routine building inspections on both building common areas, customer space and exterior Install and repair new and existing plumbing fixtures and accessories; perform minor leak repairs to roof, window, and fountains Install and repair various types of electrical fixtures including lamp and ballast replacement, switches, receptacles, breakers, etc. Log chillers and, in conjunction with the HVAC Technician, perform minor repair of heating, ventilation, and air conditioning equipment, including filter changes and belt replacements Monitor water chemical treatment programs for cooling towers and fountains and log readings Investigate and monitor repeat customer-related calls and report them to the Property Manager Assist contractors with life safety alarm systems and water-based or dry fire protection systems shut downs and testing Be responsible for accurate and timely record keeping and reporting Assist in hurricane preparedness and response Foster a positive and productive working relationship with each customer in the building to ensure the best customer service experience and overall customer satisfaction Be available for emergency calls at night, weekends, and holidays on an alternating schedule (on-call) Complete appropriate documentation in a timely manner QUALIFICATIONS/KNOWLEDGE, SKILLS, ABILITIES: Documented training/certification/license in one or more of the following fields: Electrical Plumbing Mechanical Life Safety Customer Service Skills Basic computer skills, excel, word, outlook Fundamental knowledge of state and local building codes Maintain a current Florida Driver's License Strong problem-solving skills Excellent verbal and written communication skills EDUCATION/EXPERIENCE: High School diploma or equivalent required Three or more years of commercial real estate maintenance experience Systems Maintenance Administrator or Systems Maintenance Technician designation through BOMA preferred. Why Join Our Team At Highwoods you will be part of our people-focused culture, which is a supportive environment where your growth and success are as important as that of our customers. With our customer-centric design, everything we do is driven by the goal of delivering greater value to our customers, their teams and our shareholders. We build and operate spaces that are more than workplaces; they are vibrant parts of the community where success and creativity flourish. What Sets Us Apart As part of the Highwoods team, you're not just taking on a job; you're joining a culture that values integrity, collaboration, and growth. We believe our culture is the key to success in the dynamic world of commercial real estate. Every member of our team plays a role in defining and upholding this culture-it's not just words on a page, but a way of working and living every day. We are more than just a commercial real estate company-we are in the business of creating remarkable workplaces that inspire and support growth, community and connection. Our mission is to build environments and experiences that empower our teammates and customers to achieve more together. When you join Highwoods, you'll bring your unique skills, experiences, and values to life through our shared mission. Together, we create a thriving workplace where every teammate has the support and opportunity to make a meaningful impact. WORK ENVIRONMENT/PHYSICAL REQUIREMENTS: While performing the duties of this job, the employee may be exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme outdoor conditions (cold / hot weather, wind, precipitation). The noise level in the work environment and job sites can be loud. Must be comfortable working on the roofs of office buildings and climbing ladders. The physical demands described here are representative of those required by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear; this position is active and requires the employee to stand, walk, balance, bend, kneel, stoop, crouch, crawl, and climb. The employee must use hands to handle or feel; grasp and reach with hands and arms - must be able to work frequently with arms extended above head. The employee must occasionally lift, push or pull up to 50-pound items. Specific visual acuity required by this job include close, distance, color, and peripheral vision; and depth perception. Ability to read, understand, and to communicate information and ideas clearly in writing and orally required. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Up to $10,000 Sign-on bonus for qualified applicants! Experience the HCA Healthcare difference where colleagues are trusted, valued members of our healthcare team. Grow your career with an organization committed to delivering respectful, compassionate care, and where the unique and intrinsic worth of each individual is recognized. Submit your application for the opportunity below:EP TechnologistMemorial Health University Medical Center. Step into the forefront of cardiac care in our Electrophysiology (EP) Lab, where cutting-edge technology and expert care are used to diagnose and treat complex heart rhythm disorders. As part of our team, you'll have the opportunity to work alongside world-class electrophysiologists and healthcare professionals, performing life-saving procedures like ablations, device implants, and advanced diagnostics. If you're passionate about heart health, excited by the challenges of arrhythmia care, and eager to make a real impact in patient outcomes, we invite you to be part of our dynamic, collaborative team. We are seeking an EP Technologist to join our team. Benefits Memorial Health University Medical Center, offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include: Comprehensive medical coverage that covers many common services at no cost or for a low copay. Plans include prescription drug and behavioral health coverage as well as free telemedicine services and free AirMed medical transportation. Additional options for dental and vision benefits, life and disability coverage, flexible spending accounts, supplemental health protection plans (accident, critical illness, hospital indemnity), auto and home insurance, identity theft protection, legal counseling, long-term care coverage, moving assistance, pet insurance and more. Free counseling services and resources for emotional, physical and financial wellbeing 401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service) Employee Stock Purchase Plan with 10% off HCA Healthcare stock Family support through fertility and family building benefits with Progyny and adoption assistance. Referral services for child, elder and pet care, home and auto repair, event planning and more Consumer discounts through Abenity and Consumer Discounts Retirement readiness, rollover assistance services and preferred banking partnerships Education assistance (tuition, student loan, certification support, dependent scholarships) Colleague recognition program Time Away From Work Program (paid time off, paid family leave, long- and short-term disability coverage and leaves of absence) Employee Health Assistance Fund that offers free employee-only coverage to full-time and part-time colleagues based on income. Learn more about Employee Benefits Note: Eligibility for benefits may vary by location. We are seeking an EP Technologist for our team to ensure that we continue to provide all patients with high quality, efficient care. Did you get into our industry for these reasons? We are an amazing team that works hard to support each other and are seeking a phenomenal addition like you who feels patient care is as meaningful as we do. We want you to apply! Job Summary and Qualifications The EP Technologist assists in all procedures performed in the EP area. The EP Technologist requires detailed knowledge of cardiovascular anatomy, physiology, disease processes and principles of cardiovascular diagnostic and interventional technology in a safe patient care. The EP Technologist demonstrates an expert knowledge of radiological equipment and safety, shielding techniques, expert imaging skills and X-ray equipment trouble-shooting skills, analyzing, 3D mapping and recording equipment and other equipment utilized in the Electrophysiology Lab, and performs unit-based activities, which contribute to a positive and professional work environment. The EP Technologist demonstrates the ability to function in all of the positions with the exception of nursing. Essential information is shared through documentation and verbal communication. Requirements: Graduate of accredited school of cardiovascular technology is required. One year of Cath Lab experience, performing both diagnostic and interventional procedures highly preferred. If not RCIS, RCES, then must be eligible to take the credentialing examination and obtain RCIS or RCES within 6 months of hire. Memorial Health University Medical Center has provided quality healthcare services since 1955, giving patients access to highly-trained physicians and advanced technology. Our 600+ bed hospital is one of the region's leading acute care facilities that serves 35 counties across southeast Georgia and southern South Carolina. Located in Savannah, Georgia, we are a regional referral center for heart care, cancer care, trauma care, children's care, high-risk pregnancies and high-risk newborn care. Our hospital includes the region's only Level I trauma center and children's hospital, as well as the Savannah campus of Mercer University School of Medicine. At Memorial Health, our care like family culture extends to our patients, our people and our community. We are committed to each other because when we join together, our patients are cared for in the safest and most compassionate way. HCA Healthcare has been recognized as one of the World's Most Ethical Companies by the Ethisphere Institute more than ten times. In recent years, HCA Healthcare spent an estimated $3.7 billion in cost for the delivery of charitable care, uninsured discounts, and other uncompensated expenses. "There is so much good to do in the world and so many different ways to do it."- Dr. Thomas Frist, Sr. HCA Healthcare Co-Founder If you find this opportunity compelling, we encourage you to apply for our EP Technologist opening. We promptly review all applications. Highly qualified candidates will be directly contacted by a member of our team. We are interviewing apply today! We are an equal opportunity employer. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Introduction PRN, as needed Do you have the career opportunities as a OR Rad Tech you want with your current employer? We have an exciting opportunity for you to join Memorial Health University Medical Center which is part of the nation's leading provider of healthcare services, HCA Healthcare. Benefits Memorial Health University Medical Center, offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include: Comprehensive medical coverage that covers many common services at no cost or for a low copay. Plans include prescription drug and behavioral health coverage as well as free telemedicine services and free AirMed medical transportation. Additional options for dental and vision benefits, life and disability coverage, flexible spending accounts, supplemental health protection plans (accident, critical illness, hospital indemnity), auto and home insurance, identity theft protection, legal counseling, long-term care coverage, moving assistance, pet insurance and more. Free counseling services and resources for emotional, physical and financial wellbeing 401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service) Employee Stock Purchase Plan with 10% off HCA Healthcare stock Family support through fertility and family building benefits with Progyny and adoption assistance. Referral services for child, elder and pet care, home and auto repair, event planning and more Consumer discounts through Abenity and Consumer Discounts Retirement readiness, rollover assistance services and preferred banking partnerships Education assistance (tuition, student loan, certification support, dependent scholarships) Colleague recognition program Time Away From Work Program (paid time off, paid family leave, long- and short-term disability coverage and leaves of absence) Employee Health Assistance Fund that offers free employee-only coverage to full-time and part-time colleagues based on income. Learn more about Employee Benefits Note: Eligibility for benefits may vary by location. Our teams are a committed, caring group of colleagues. Do you want to work as a(an) OR Rad Tech where your passion for creating positive patient interactions is valued? If you are dedicated to caring for the well-being of others, this could be your next opportunity. We want your knowledge and expertise! Job Summary and Qualifications Performs radiology exams in compliance with regulatory agencies and department/hospital policies and procedures. Complies with the Memorial Health Compliance Program, related policies and procedures and the Code of Business Practices; reports instances of perceived and actual non-compliance to Team Leader or through other reporting mechanisms. Complies with the Memorial Health Compliance Program, related policies and procedures and the Code of Business Practices; reports instances of perceived and actual non-compliance to Team Leader or through other reporting mechanisms. What qualifications you will need: Basic Cardiac Life Support must be obtained within 30 days of employment start date Registered Radiographer (ARRT) No Travel Required No experience Required Years of Experience Memorial Health University Medical Center has provided quality healthcare services since 1955, giving patients access to highly-trained physicians and advanced technology. Our 600+ bed hospital is one of the region's leading acute care facilities that serves 35 counties across southeast Georgia and southern South Carolina. Located in Savannah, Georgia, we are a regional referral center for heart care, cancer care, trauma care, children's care, high-risk pregnancies and high-risk newborn care. Our hospital includes the region's only Level I trauma center and children's hospital, as well as the Savannah campus of Mercer University School of Medicine. At Memorial Health, our care like family culture extends to our patients, our people and our community. We are committed to each other because when we join together, our patients are cared for in the safest and most compassionate way. HCA Healthcare has been recognized as one of the World's Most Ethical Companies by the Ethisphere Institute more than ten times. In recent years, HCA Healthcare spent an estimated $3.7 billion in cost for the delivery of charitable care, uninsured discounts, and other uncompensated expenses. "Bricks and mortar do not make a hospital. People do."- Dr. Thomas Frist, Sr. HCA Healthcare Co-Founder If you are looking for an opportunity that provides satisfaction and personal growth, we encourage you to apply for our OR Rad Tech opening. We promptly review all applications. Highly qualified candidates will be contacted for interviews. Unlock the possibilities and apply today! We are an equal opportunity employer. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Job Title: Service Technician Salary $90,000 per annum + Excellent benefits package A great role with a fast-growing, established manufacturing business based in St. Joseph, Missouri. They are looking for an outstanding engineer to join their growing service team. Key Responsibilities - Service Technician The position involves the setting and testing of automation machinery prior to despatch, commissioning in customer's factories and the training of operator and maintenance personnel in the use of their equipment. Duties - Service Technician Setting and testing of the client's full range of equipment. Final testing and assembly of machinery in preparation of inspection and despatch. Installation and Commissioning of equipment. Training of customer's staff at various levels at both the client's and customer's overseas premises. Report writing and recommendations following all visits. Liaise with Sales, Production and Design. Some Worldwide travel including weekend work & travel where required. To ensure that all relevant machine documentation is always completed accurately. To identify opportunities for process, productivity and quality improvements by highlighting issues to management. To actively participate in improvement projects as required. Develop effective relationships with all internal and external stakeholder, customers and suppliers. Qualifications & Requirements - Service Technician Must have completed a recognised Engineering Apprenticeship. Mechanically based skillset with a proven track record of mechanical assembly and fault diagnosis. Able to use measuring equipment such as Micrometre and Vernier callipers with an attention to detail. Able to read and interpret mechanical assembly drawings. Able to read and interpret pneumatic drawings and circuits. Fault find pneumatic circuits to component level. Basic understanding of electrical control circuits. Basic understanding of PLC Machine controls. Able to write concise informative reports and offer solutions to problems. Self-motivated and enthusiastic and able to communicate at all levels. Must hold a valid passport and be willing to travel internationally and be very flexible in terms of working hours and travel. Comply with the latest vaccinations, inoculations and blood tests for foreign travel. What we can offer - Service Technician Excellent annual salary Comprehensive benefits package A supportive, inclusive environment Ongoing training and development Call for action: For more information on this role, please contact Paul Furlong on +44 1453 829789 or send a copy of your CV to ******************************** Candidates who are currently a Maintenance Engineer, Field Service Engineer and Asset Care Engineer could be suitable for this role For details of other opportunities available within your chosen field please visit our website ***********************

At Nicolet National Bank, our culture is based on the principles of community banking, putting the needs of our customers at the forefront of our decision-making. Our Core Values drive everything we do, and we are committed to serving our customers with excellence. We believe that every job in our organization is critical to our success, and we are dedicated to creating a work environment where our employes feel valued, respected, and supported. With locations in Wisconsin, Michigan, Minnesota, and Florida we are proud to service our local communities and make a positive impact on the lives of our customers. At Nicolet National Bank, we believe that our people are our most valuable asset, and we are committed to investing in their growth and development. This position is primarily responsible for managing the coordination, scheduling, and completion of both short and long-range facility projects as well as the general maintenance, repair, and upkeep of our facility, including building systems, equipment, and grounds. It is also responsible for ensuring maintenance, repair, testing, inspection, certification, and service for all building systems, including documentation evidencing said work. This position is accountable for the overall efficient operation of all bank locations. As a Facilities Technician, you will: Scheduling preventative maintenance, routine inspections and replacement of bank equipment and performing minor maintenance on a daily schedule for all locations (e.g., changing light bulbs, setting up tables/chairs for presentations and other company events, paint touch-ups, etc.). Assists with repair and maintenance on large projects as requested or required. Diagnose and repair minor issues with mechanical systems, lighting, doors, fixtures, and general building maintenance. Perform minor landscaping, snow removal, and parking lot upkeep as needed. Ensuring that all physical locations are always presentable; all equipment is working properly; all furniture is presentable; all cubicles are set up appropriate for new hires or for employee moves. Aiding in the transfer of materials for employee moves and assisting in office clean-up for employee terminations when applicable. Managing furniture inventory to include new purchases and maintenance and/or repair of existing furniture and cubicles. Coordinate with external vendors and contractors for specialized repairs and services for branch equipment and building related items. Respond promptly to maintenance requests and communicate with request owners on the status of requests and progress. Work with management in developing project estimates and monitoring expense on projects as required. Participating in the creation of emergency action and preparedness plans as well as OSHA policies and procedures. Hanging signage, postings, white boards, art, etc. for all locations. Monitoring vendor contracts and building contracts (e.g., lease agreements to determine work responsibility) and vendor performance to ensure contracted services are being carried out to bank's satisfaction. Perform any activity, whether subject to contract, that is required for the efficient operation or presentation of each location. Document and advise supervisor of deficiencies with vendor performance as necessary. Handling of building-equipment emergencies on an ongoing basis and serves as the liaison between bank employees and outside contractors called to fix problems. Working with the IT department with telecommunications system and computer equipment as directed. Uphold Nicolet's philosophy and policies by maintaining appropriate controls to ensure full compliance with applicable laws and regulations, thereby fulfilling legal responsibilities and enhancing the quality of services provided by Nicolet. Understand and communicate the value of diversity within the workplace and to work successfully with others without regard to age, gender, race, sexual orientation, ethnicity, culture, religion, disability status, socioeconomic status, or other non-job-related classification, including a commitment to Nicolet's policies on equal employment opportunities and non-discrimination with a willingness to pursue efforts of inclusion and respect toward different perspectives. Performs all other duties as assigned. Qualifications: High School Diploma or equivalent. Minimum 2+ years in a facilities role. 5+ years in a facilities role is preferred. Must have reliable transpiration for travel between branches. Knowledge of state and local building codes and fire codes. Strong organizational, multi-tasking and prioritizing skills. Self-motivated and resourceful. Proficiency with Microsoft Office applications. Ability to maintain strict confidentiality. Benefits: Medical, Dental, Vision, & Life Insurance 401(k) with a company match PT0 & 11 1/2 Paid Holidays The above statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all responsibilities and skills required for the position. Equal Opportunity Employer/Veterans/Disabled

DOVER PRECISION COMPONENTS: Dover Precision Components ‘DPC' (‘the Company') is part of Dover Corporation's (‘the Parent Company') Pumps and Process solutions segment. DPC holds market leading positions globally and delivers performance-critical solutions across the oil & gas, power generation, marine, industrial, chemical and general processing markets. We design and manufacture mission-critical equipment components to deliver more affordable, cleaner energy solutions and enable manufacturers to operate more efficiently. WE DELIVER CUSTOMER SUCCESS Dover Precision Components delivers products and services that enhance performance, improve safety, reduce carbon emissions, and accelerate clean energy adoption, through collaborative customer relationships, expert engineering, and an innovative culture. Our strong Company portfolio is comprised of long products and services offered under Cook Compression, Cook Mechanical Field Services, Waukesha Bearings, Waukesha Magnetic Bearings, Inpro/Seal, Bearings Plus, and FW Murphy Production Controls. Our global footprint reaches more than twelve locations in the Americas and more than six locations in Europe and China. BUILDING POTENTIAL. SUSTAINING PERFORMANCE. BOOSTING FUTURES. We are diligent in recognizing our employees' needs and providing an enriching experience through professional developmental opportunities. Our authentic, collaborative company culture, combined with a competitive suite of health and welfare offerings, emulates who we are. We are Dover Precision Components, #LifeAtDPC Summary: The Valve Technician is responsible for assembling (disassembly) valve/packing cases and inspecting all items that come into the Valve shop. Responsibilities: Assemble (disassembly) valves/packing cases correctly and in a timely manner. Test all valves and packing cases according to company procedures. Adhere to all company policies and procedures. Participate in company Lean and 5S initiatives Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Education and Experience: HS diploma or related job experience Be able to read O.D. and depths mics along with dial calipers. Mental/Visual/Physical Effort: Regularly required to stand for long periods of time Required to use hands to finger, handle, or feet Occasionally required to sit Must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus MATERIAL HAZARDS: Regularly exposed to moving mechanical parts Occasionally exposed to fumes or airborne particles and vibration We consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position's responsibilities, a candidate's work experience, a candidate's education/training, the position's location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work. Benefits: Our total rewards package for eligible team members also includes: a 401(k) savings plan with employer contributions; medical, dental and vision insurance; wellness programs; health savings account, health care and dependent care flexible spending accounts; company paid short-term disability and long-term disability; company paid employee basic life and AD&D insurance; supplemental employee and dependent life insurance; optional accident, hospital indemnity and critical illness insurance; adoption, surrogacy, and fertility benefits and assistance; commuter benefits; parental, military, jury duty, and bereavement leaves of absence; paid time off, including business travel services; employee discounts; and an employee assistance program that includes company paid counseling sessions and legal services. Eligibility for benefits is governed by applicable plan documents and policies. All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law. Attention Applicants: If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please contact *********************for assistance with an accommodation. Kindly specify Job Requisition Number / Job Title and Location in response. This position may be located in:Americas : United States : Texas : Tyler Sub Division : Cook Services US - E0051 Job Requisition ID : 63332 Job Function : Manufacturing & Operations

Collaborate with Innovative 3Mers Around the World Choosing where to start and grow your career has a major impact on your professional and personal life, so it's equally important you know that the company that you choose to work at, and its leaders, will support and guide you. With a diversity of people, global locations, technologies, and products, 3M is a place where you can collaborate with other curious, creative 3Mers. The Impact You'll Make in this Role As an Industrial Maintenance Mechanic, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative and diverse people around the world. Here, you will make an impact by: Responsible for maintaining, troubleshooting, repairing, modifying, and adjusting mechanical equipment, piping and piping systems, fixtures, and equipment for steam, hot water, heating, cooling, lubricating, sprinkling, and industrial processing systems used in production, laboratory, office, and utility areas. Responds to Shop Work Orders in performing maintenance and repair tasks in a safe manner Implements and improves preventive maintenance procedures Determines parts, tools, and supplies necessary for the jobs Documents work activities in the work order CMMS. Willingness to learn and expand craft skills Your Skills and Expertise To set you up for success in this role from day one, 3M is looking for candidates who must have the following qualifications: High School Diploma or equivalent. Two-year associate's degree in the mechanical maintenance field, or graduate from an approved apprenticeship program. Five years of experience in the mechanical maintenance/troubleshooting of industrial processing equipment. Must possess a current and valid driver's license. Additional qualifications that could help you succeed even further in this role include: Experience troubleshooting issues with processing equipment and resolving them by implementing appropriate repairs. At least one year of experience running basic machining equipment (turning, milling, welding) Understanding how to safely use rigging equipment such as hoists, cranes, lift trucks, dollies, rollers, and jacks. Understanding the operating principles of mechanical and hydraulic power transmission components or elements such as shafts, bearings, gears, pulleys, belts, chains, seals, fasteners, couplings, brakes, clutches, pumps, valves, and similar devices. Ability to read and interpret measurement instruments to better troubleshoot equipment malfunctions. Ability to communicate effectively and work well with other people. Ability and desire to work as a multi-skilled mechanical craftsperson. Basic computer knowledge. Pay & Benefits: The starting rate of pay for this position is $46.93. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences, and Retirement Benefits, etc.). Additional information is available at: ************************************************************** Must be legally authorized to work in the country of employment without sponsorship for employment visa status (e.g., H1B status). Responsibilities of this position may include direct and/or indirect physical or logical access to information, systems, technologies subjected to the regulations/compliance with U.S. Export Control Laws. U.S. Export Control laws and U.S. Government Department of Defense contracts and sub-contracts impose certain restrictions on companies and their ability to share export-controlled and other technology and services with certain "non-U.S. persons" (persons who are not U.S. citizens or nationals, lawful permanent residents of the U.S., refugees, "Temporary Residents" (granted Amnesty or Special Agricultural Worker provisions), or persons granted asylum (but excluding persons in nonimmigrant status such as H-1B, L-1, F-1, etc.) or non-U.S. citizens. To comply with these laws, and in conjunction with the review of candidates for those positions within 3M that may present access to export controlled technical data, 3M must assess employees' U.S. person status, as well as citizenship(s). The questions asked in this application are intended to assess this and will be used for evaluation purposes only. Failure to provide the necessary information in this regard will result in our inability to consider you further for this particular position. The decision whether or not to file or pursue an export license application is at 3M Company's sole election. Supporting Your Well-being 3M offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, 3M regularly benchmarks with other companies that are comparable in size and scope. Resources for You For more details on what happens before, during, and after the interview process, check out the Insights for Candidates page at 3M.com/careers 3M is an equal-opportunity employer. 3M will not discriminate against any applicant for employment on the basis of race, color, national origin, religion, sex, sexual orientation, gender identity, age, disability, or veteran status. Must be legally authorized to work in the country of employment without sponsorship for employment visa status (e.g., H1B status). Applicable to US Applicants Only:The starting rate of pay for this position is $46,93, with the potential to reach $47,93 . This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: **************************************************************.All US-based 3M full time employees will need to sign an employee agreement as a condition of employment with 3M. This agreement lays out key terms on using 3M Confidential Information and Trade Secrets. It also has provisions discussing conflicts of interest and how inventions are assigned. Employees that are Job Grade 7 or equivalent and above may also have obligations to not compete against 3M or solicit its employees or customers, both during their employment, and for a period after they leave 3M.Learn more about 3M's creative solutions to the world's problems at ********** or on Instagram, Facebook, and LinkedIn @3M.Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties.Safety is a core value at 3M. All employees are expected to contribute to a strong Environmental Health and Safety (EHS) culture by following safety policies, identifying hazards, and engaging in continuous improvement.Pay & Benefits Overview: **************************************************************3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law. Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly. 3M Global Terms of Use and Privacy Statement Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at 3M are conditioned on your acceptance and compliance with these terms. Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application, you will be asked to confirm your agreement with the terms.

Allen County Job Descriptions SECURITY AND INFORMATION OFFICER Department: Maintenance FLSA Status: Non-Exempt Classification/Level: Part-Time Date: 08/2019 Under the direction of the Operations Manager, the Security and Information Officer is responsible for monitoring and securing all public areas throughout the building and around the perimeter to ensure the safety of employees and visitors to the building. This position is not covered as defined by The Board of Commissioners of the County of Allen Employee Handbook. ESSENTIAL FUNCTIONS: · Monitors and secures all hallways and public areas throughout the building · Monitors security checkpoints throughout the building and around the perimeter of the building. · Ensures the safety and security of employees during operating hours and confirms the building is secured every evening. · Observes and monitors the general public entering and exiting the building and surrounding areas. · Reports any suspicious activity to the Allen County/Fort Wayne City Policy and/or the Operations Manager. · Prepares detailed incident reports and promptly reports incidents to the Operations Manager. · Validates approved County employee parking and submits documentation to the Operations Manager. · Performs all other duties as assigned. REQUIREMENTS: · High School Diploma or GED · One year experience in security or law enforcement preferred · Knowledge and ability to apply evidence collection and preservation techniques · Ability to deal with potentially violent individuals in precarious situations with swiftness, rationality and authoritative action · Ability to maintain strict confidentiality of all County and City information · Ability to use a 2-way radio · Ability to become certified in CPR/AED and First Aid PERSONAL WORK RELATIONSHIPS: The Security and Information Officer maintains frequent contact with the public and other County and City employees. WORKING CONDITIONS: The Security and Information Officer performs work that requires frequent standing and sitting, with some walking and the ability to move about freely. Some lifting of up to twenty pounds, bending, pushing/pulling, kneeling, typing, attention to detail, monitoring of equipment, detailed inspection and proofreading exist. The Security and Information Officer is sometimes exposed to dangerous equipment, extreme temperatures, chemicals and noise. SUPERVISION: None LICENSING: Valid CPR/AED and First Aid Certification IMMEDIATE SUPERVISOR: Operations Manager HOURS: Hours vary; 20-28 hours/week

The Maintenance Technician will be responsible for preventive maintenance, inspections, installations, and repairs on all assigned equipment to ensure their proper operation and function in accordance with safety regulations and company policy. What you'll do: Perform routine inspections, basic installations, and minor repairs. Perform general building maintenance which may include carpentry, painting, light plumbing, changing of light bulbs, and repair of minor electrical devices. Maintain all records, such as work orders and necessary reports to ensure accurate recording of activities for code and regulatory purposes. Process work requests and turn in completed work requests in a timely and professional manner. Utilize electronic system to order necessary parts, devices, etc. to properly repair or complete assigned work orders, following department procedures. Maintain all tools and equipment in clean, safe, working order. Maintain adequate inventory of related parts to perform assigned duties. Maintain technical skills and required certifications to perform job duties. Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job. Respond to emergency situations to ensure employee and facility safety. Report possible safety issues and recommend appropriate changes. Comply with OSHA, and other local, state and federal regulations. Maintain friendly, efficient, positive customer service attitude toward customers, clients and co-workers. Respond professionally to departmental needs. About you: 1+ year experience in facility maintenance required. An associates' degree in mechanical, electrical or industrial maintenance.

Description: This position performs on-site work in the assembly, maintenance, testing and inspection of manual and/or hydraulic valves utilized in Oil & Gas fracturing operations. Travels to remote client worksites to perform service on equipment. Possesses strong technical skills to troubleshoot and resolve problems without any direct supervision. Essential Duties & Responsibilities Understands and follows all HR, HSE and Quality Management Policies. Attends and engages in all OJT led by a Shop Technician II, III or Supervisor, and any other available training that is required to perform job successfully. Responsible for frac stack lubrication that meets manufacturer's specifications before equipment is deployed into production environments. Rebuilds valves Catalogs replacement parts in/out of valves per API standards Creates damage sheets for rebills to customer Inventories valve parts. Repairs frac vales on client work sites. Assists in all facets of equipment maintenance, preparation, testing and appearance as directed and as specific to Flowback operations. Responsible for maintenance and operation of the support equipment necessary to prepare the pressure equipment for storage or job prep. (Steam Cleaner, Forklift, Crane, Pressure Test Unit, Torque Units, Paint Booth Apparatus). Keeps working area and facility in an organized and neat condition. Available to workdays and times necessary to complete required work. May be required to perform other related duties as assigned. Requirements: Physical & Safety Requirements Requires operation of heavy equipment. Requires employee to stand for up to 100% of the time. Requires employees to climb ladders or stairs to inspect, repair, and paint equipment. Must be able to lift and/or move 80 - 95 pounds. High noise environment (>85dbA) will occur with ear protection. This position requires working in outdoor Shop environment consisting of wet, and/or humid conditions as well as extreme heat and extreme cold. Requires employees to climb heights of at least 10 feet moving and maintaining self in different positions-stoop, kneel, crouch and crawl to accomplish tasks in various environments including tight and small spaces. Must wear all required PPE, including fire-retardant clothing, hard hats, face shields, hearing protection, safety glasses, and steel-toed boots. Specific vision abilities required by this job include close vision, distance vision, color vision, and ability to adjust focus. Skills and Abilities Perform pressure testing utilizing certified test equipment and complete all QA/ QC documentation as required by the QHSE program (if skilled). Perform hands-on workshop and/ or on-site disassembly, inspection, reporting, cleaning, and reassembly of valves and actuators and other equipment. Machine material and/ or parts with various machining equipment. Ensure work and used materials follow manufacturer specifications. Read and interpret schematics for assembly, repair, and reassembly as required including completion of applicable quality documentation in either paper or electronic form. Perform failure assessments and make recommendations to the on-site supervisor as required. Perform day-to-day and routine safety observations and inspections Must pay attention to detail. Ability to read, write and communicate effectively. Skilled in the use of overhead crane and forklift equipment. Must be able to work with little to no supervision, executing work based on established expectations. Ability to follow proper protocol for incident reporting and emergency situations. Ability to understand and follow protocol with Stop Work Authority Ability to identify top priorities in a high-volume multitask work environment and the ability to determine critical few and know when to communicate issues and escalate them for decision-making. Must be mechanically inclined. Able to withstand the mental and physical stress brought in by the element of an outdoor work environment. Behavioral Competencies Must have attention to detail. Possess effective communication skills. Able to follow proper protocol for incident reporting and emergency situations. Good moral character and team player attitude. Must be safety conscious. Dedication & commitment to team focus common goals. Able to be flexible and adaptable to the ever-changing needs of clients and industry. Able to withstand the mental and physical stress brought in by the element of an outdoor work environment. Fosters a positive working relationship with co-workers, customers, clients and management. Maintain an “above approach” lifestyle that reflects the company's values. Teamwork. Caring. Integrity. Work Ethic. Required Education & Experience At least 1-year recent, practical experience with Flowback equipment. High school diploma or GED preferred. Training Requirements PEC/SafeLand. Smith Driving Instruction. Forklift Arial Lift Fall protection Additional training to be assigned as needed Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Must pass pre-employment drug tests and maintain client required random drug tests. Must have a valid driver's license and clean driving record to be cleared to operate motor vehicles. Must pass a background investigation. EEO Statement One X provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law.

Electrical Maintenance Technician **We offer:** + Competitive starting pay is $35.00/hour with the potential to reach $39.67/hour. + Medical, vision, dental, and life insurance starting on your first day. + 401k with generous company match + Three weeks of paid vacation per year (prorated for the first year based on start date) + Twelve (12) company holidays + Employee assistance program and medical support + Opportunities for advancement **The Impact You'll Make in this Role** As an Electrical Maintenance Technician, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative and diverse people around the world. Here, you will make an impact by: + Troubleshoot/repair electrical/electronic equipment and components, hydraulic/pneumatic equipment, web handling systems, mechanical equipment and components. + Program/troubleshoot PLCs and drives. + Install/upgrade equipment. **Your Skills and Expertise** To set you up for success in this role from day one, 3M requires (at a minimum) the following qualifications: + Possess a two (2) year degree/diploma or higher (completed and verified prior to start) OR be within the final six (6) months of completing a two (2) year degree/diploma in an Electrical or Electro/Mechanical Technician field. + Interested and available to work 3rd shift (6pm-6am) **Additional qualifications that could help you succeed even further in this role include:** + One (1) year of Industrial Electrical Maintenance experience + Experience with PLC programming + Advanced systems knowledge in Allen Bradley PLCs and Drives + WI Journeyman or Master Electricians License + Robotics Knowledge ****** **Qualified applicants will be required to take and pass 3M elected testing as a part of the selection process.** **Work location:** + Prairie du Chien, WI **Travel:** Does not include travel **Relocation Assistance:** Is not Authorized **Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status).** **Supporting Your Well-being** 3M offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, 3M regularly benchmarks with other companies that are comparable in size and scope. **Chat with Max** For assistance with searching through our current job openings or for more information about all things 3M, visit Max, our virtual recruiting assistant on 3M.com/careers. \#INDPROD Applicable to US Applicants Only:The starting rate of pay for this position is $29.75, with the potential to reach $32.75 . This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: **************************************************************** All US-based 3M full time employees will need to sign an employee agreement as a condition of employment with 3M. This agreement lays out key terms on using 3M Confidential Information and Trade Secrets. It also has provisions discussing conflicts of interest and how inventions are assigned. Employees that are Job Grade 7 or equivalent and above may also have obligations to not compete against 3M or solicit its employees or customers, both during their employment, and for a period after they leave 3M. Learn more about 3M's creative solutions to the world's problems at ********** or on Instagram, Facebook, and LinkedIn @3M. Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties. Safety is a core value at 3M. All employees are expected to contribute to a strong Environmental Health and Safety (EHS) culture by following safety policies, identifying hazards, and engaging in continuous improvement. Pay & Benefits Overview: https://**********/3M/en\_US/careers-us/working-at-3m/benefits/ 3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law. **Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly.** **3M Global Terms of Use and Privacy Statement** Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at 3M are conditioned on your acceptance and compliance with these terms. Please access the linked document by clicking here (************************************************************************************************* , select the country where you are applying for employment, and review. Before submitting your application, you will be asked to confirm your agreement with the terms. At 3M we apply science in collaborative ways to improve lives daily as our employees connect with customers all around the world. Learn more about 3M's creative solutions to global challenges at ********** or on Twitter @3M or @3MNews. 3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law.

Electrical Maintenance Technician We offer: Competitive starting pay is $35.00/hour with the potential to reach $39.67/hour. Medical, vision, dental, and life insurance starting on your first day. 401k with generous company match Three weeks of paid vacation per year (prorated for the first year based on start date) Twelve (12) company holidays Employee assistance program and medical support Opportunities for advancement The Impact You'll Make in this Role As an Electrical Maintenance Technician, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative and diverse people around the world. Here, you will make an impact by: Troubleshoot/repair electrical/electronic equipment and components, hydraulic/pneumatic equipment, web handling systems, mechanical equipment and components. Program/troubleshoot PLCs and drives. Install/upgrade equipment. Your Skills and Expertise To set you up for success in this role from day one, 3M requires (at a minimum) the following qualifications: Possess a two (2) year degree/diploma or higher (completed and verified prior to start) OR be within the final six (6) months of completing a two (2) year degree/diploma in an Electrical or Electro/Mechanical Technician field. Interested and available to work 3rd shift (6pm-6am) Additional qualifications that could help you succeed even further in this role include: One (1) year of Industrial Electrical Maintenance experience Experience with PLC programming Advanced systems knowledge in Allen Bradley PLCs and Drives WI Journeyman or Master Electricians License Robotics Knowledge **Qualified applicants will be required to take and pass 3M elected testing as a part of the selection process. Work location: Prairie du Chien, WI Travel: Does not include travel Relocation Assistance: Is not Authorized Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status). Supporting Your Well-being 3M offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, 3M regularly benchmarks with other companies that are comparable in size and scope. Chat with Max For assistance with searching through our current job openings or for more information about all things 3M, visit Max, our virtual recruiting assistant on 3M.com/careers. #INDPROD Applicable to US Applicants Only:The starting rate of pay for this position is $29.75, with the potential to reach $32.75 . This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: ****************************************************************** US-based 3M full time employees will need to sign an employee agreement as a condition of employment with 3M. This agreement lays out key terms on using 3M Confidential Information and Trade Secrets. It also has provisions discussing conflicts of interest and how inventions are assigned. Employees that are Job Grade 7 or equivalent and above may also have obligations to not compete against 3M or solicit its employees or customers, both during their employment, and for a period after they leave 3M.Learn more about 3M's creative solutions to the world's problems at ********** or on Instagram, Facebook, and LinkedIn @3M.Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties.Safety is a core value at 3M. All employees are expected to contribute to a strong Environmental Health and Safety (EHS) culture by following safety policies, identifying hazards, and engaging in continuous improvement.Pay & Benefits Overview: https://**********/3M/en_US/careers-us/working-at-3m/benefits/3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law. Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly. 3M Global Terms of Use and Privacy Statement Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at 3M are conditioned on your acceptance and compliance with these terms. Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application, you will be asked to confirm your agreement with the terms.

Job Description COME JOIN OUR TEAM! Titan Corp seeks maintenance technicians for growing property management company. Benefits include: Medical, Dental, Vision, 401K, and Paid Time off. The role of Maintenance Technician is to provide proper maintenance for the community, along with providing excellent customer service to all residents and prospects. Maintenance Technicians must wear complete uniform with I.D. badge when working on any Titan Corp. property at all times, including nights and weekends. Essential Duties include the following (other duties may be assigned): 1. Complete all service requests within 24 hours, unless it requires extraordinary parts or labor. 2. Keep maintenance shop in a clean and orderly manner. 3. Monitor and operate compactor. 4. Help maintain grounds and streets free of litter. 5. Keep uniform and personal appearance clean and neat. 6. Maintain all amenity areas. 7. Assist Community Director with unusual projects as necessary to maintain smooth property operation. 8. Maintain all project directional signs, making sure they are clean, painted, and straight. 9. Monitor recycling containers. Keep them clean and items separated. 10. Call Community Director or Maintenance Supervisor before you are going to be out of work for any reason. 11. Monitor guidelines for vacant, office, and common areas. 12. Responsible for checking and replacing any defective or burned out light bulbs or security lights. Light inspections to be done one or two times per week. 13. Serve maintenance "on call" as necessary. 14. Perform other duties as assigned by the Community Director and/or Maintenance Supervisor. While performing the above responsibilities and assignments, you may be required to perform tasks that will require a great amount of physical exertion. Listed below are common requirements for your duties as Maintenance Technician for Titan: · Use various hand tools and test equipment; these items may vary in weight from a few ounces to 40 pounds. · Use a 30-pound can of refrigerant for servicing of air-conditioners. · Hand-carry and use a 70-pound refrigerant recovery unit. · Hand-carry and install air-conditioning compressors weighing from 40 pounds to 120 pounds, depending upon the size of the condensing unit · Hand-carry and install air-conditioning condenser units weighing 100 to 250 pounds. · Hand-carry and install furnace / forced air unit weighing up to 90 pounds. · Hand-carry and install hot water heaters weighing between 70 and 90 pounds. · Hand-carry and install commode/closet combination weighing 40 to 50 pounds. · You will be required to climb ladders in order to clean leaves out of gutters and do roof repairs. Ladders required to perform this task will range from 16 to 40 feet in length and range in weight from 20 to 125 pounds. You will be required to lift and transport these ladders. · Make sure preventative maintenance is done on all weight room equipment. · Use of a ladder is required to change light bulbs in breezeways and on buildings. These ladders could range in weight from 10 to 125 pounds. · Changing panels of glass ranging in weight from 10 to 40 pounds is require and may require the use of a ladder to accomplish the task. · Pool maintenance is a big responsibility and often requires you to lift and / or transport 100-pound drums of granular chlorine, 50-pound drums of stick chlorine, and 50-pound bags of soda ash or bicarbonate of soda. You are responsible for replacing pool pump room motors and pumps. These pumps and motors could range from 25 to 200 pounds, depending on the size required. · As part of your daily maintenance routine, you may be required to move appliances from one apartment to another apartment on opposite ends of the community. The appliance may have to be transported by means of a hand truck up one to three flights of steps. These appliances will range in weight from 75 to over 200 pounds. · Our commercial laundry rooms are equipped with single washing machines and / or stacked (double) clothes dryers, which you will be required to move in order to repair and perform preventative maintenance. These machines range in weight from 120 to 150 pounds. · On occasion, you will be required to move furniture from one model unit to another or move furniture items in a resident's apartment to accomplish certain repairs or to correct flood damage. This would require that you move items weighing several pounds to several hundred pounds. · During the course of your job, you may be involved in repairs to the building structure. You may be required to move or transport a number of different building type materials weighing several pounds to several hundred pounds · At certain times you will be required to perform maintenance on special equipment (i.e., exercise equipment, gas grills, golf carts, car washes, amenity areas, and security gates). All of these functions require different physical exertion and their weight depends on the particular equipment (usually in excess of 100 pounds) · You will be required to perform certain resident service functions or make upgrades to the apartment. An example would be to install track lighting or ceiling fans. Both duties would require the work to be done using a stepladder and require lifting with two hands. In addition to the above, you will be required to lift and transport other items pertaining to maintenance (weighing up to 200 pounds) for the smooth operation of the property. Customer Service Responsibilities: · Communicate clearly to the residents, both verbally and in writing. · Read and / or listen to resident requests / concerns. · Receive resident concerns in a calm and open manner. Qualifications: Special Skills Required . Must be CMRT (Certified Maintenance and Reliability Technician) certified. Must be EPA (Environmental Protection Agency) certified. Must be CPO (Certified Pool Operator) certified. · Must have a sense of pride about a job well done, be courteous and tactful, and have a commitment to quality work. · Must be clean cut, neatly dressed, and wear the proper uniform each day. · Must have good character and background that can stand up under a thorough background check. · Must take and pass a drug-screening test. Must be able to pass an agility test. · Must be able to communicate to residents, both verbally and in writing, and receive residents' concerns in a calm and open manner. · Must have dependable transportation capable of carrying tools and parts to ensure an efficient use of time to provide proper building maintenance. · Must have a valid driver's license. Knowledge · General property operations: · Safety · Heating and A/C · Plumbing · Pool Care · Electrical · Carpentry · Appliance / Equipment Repair · Wallpaper / Painting

_ ~ 2021 Best Places to Work in South Carolina Award Winner ~_ An employee owed, industry leader in manufacturing, with over 100 years in business, is looking for an Industrial Maintenance & Electrical Tech in Elgin, South Carolina. The ideal candidate enjoys a fast-paced environment, is responsive and a great multi tasker, technical in nature, driven by problem solving and puzzles, and desires to work on a high performing team. This position is mechanical and technical dealing with machines and systems as much as with people. The work environment is not predictable, team oriented and requires a desire for highly responsive solutions to technical problems in a team environment. T This role is primarily responsible for servicing/repairing production machines; including preventative maintenance, diagnose failures, make necessary repairs, and recommend/plan upgrades and improvements. Machine Maintenance Experience 5 Year min. Broad experience from new Haas CNC's to a wide variety of older machines; lathes, mills, grinders, etc. Electrical, mechanical, pneumatic, and hydraulic experience. Strong troubleshooting and research skills Fast, accurate, service oriented work Happiest in a dynamic, team oriented, fast paced environment BENEFITS: 401K and ESOP Gain share bonuses Paid PTO Comprehensive Health Insurance Vision & Dental Life Insurance Long and Short-Term Disability Monday -Thursday - 4 day work week; first shift About AMBAC International: AMBAC is a global supplier of fuel systems and related components to the heavy-duty diesel industry. We have been producing engine systems since 1910, making us one of the oldest and most experienced companies in our industry. We primarily supply diesel fuel systems, electric governors, and advanced components. Our products are used in global transportation, agriculture, aviation, defense, power generation, and more. AMBAC International is employee owned, open book, equal opportunity employer, and a drug free work environment. BENEFITS: 401K Paid PTO Comprehensive Health Insurance Vision & Dental Life Insurance Long and Short-Term Disability 4 day work week First Shift Occasional Overtime ~ Pay & Benefits details are available during interviews About AMBAC International: AMBAC Careers AMBAC is a global supplier of fuel systems and related components to the heavy-duty diesel industry. We have been producing engine systems since 1910, making us one of the oldest and most experienced companies in our industry. We primarily supply diesel fuel systems, electric governors, and advanced components. Our products are used in global transportation, agriculture, aviation, defense, power generation, and more. AMBAC International is employee owned, open book, equal opportunity employer, and a drug free work environment.

Join the industry leader to design the next generation of breakthroughs. Innovate to solve the world's most important challenges. Honeywell is a Fortune 100 company that invents and manufactures technologies to address critical challenges linked to global macrotrends such as safety, security, productivity, global urbanization and energy. With approximately 100,000 employees worldwide, including more than 19,000 engineers and scientists, Honeywell has an unrelenting focus on quality, delivery, value, and technology in everything they make and do. Honeywell has been named a Top 100 Global Innovator for seven years in a row, recognizing the company's global reach of portfolio and invention influence. In Kansas City, Honeywell Federal Manufacturing & Technologies (FM&T) manages and operates the U.S. Department of Energy/National Nuclear Security Administration's (NNSA) Kansas City National Security Campus. This state-of-the-art engineering, manufacturing and sourcing facility produces a wide array of intricate components to deliver trusted national security products and government services primarily for the NNSA. Honeywell FM&T's culture of integrity, commitment and continuous improvement enables them to deliver responsive, collaborative and innovative management and technology services and products that translate into cutting edge solutions to complex national security issues. Summary Sets up for self and operates all types and sizes of equipment that is identified under machine shop terminology as lathe, mill, grind, profile, transfer, bore, hob, lap, thread, balance, hone, drill, automatic screw machines and flexible manufacturing systems; including special attachments, handling and/or holding devices. Duties and Responsibilities Sets up for self and operates all types and sizes of equipment that is identified under machine shop terminology as lathe, mill, grind, profile, transfer, bore, hob, lap, thread, balance, hone, drill, automatic screw machines and flexible manufacturing systems; including special attachments, handling and/or holding devices. Flexible manufacturing system is defined as an automated production system for the manufacture and in process work verification of product consisting of more than one machine tied together by an automated handling system, all controlled by a computer. Equipment design or name may include one or more of the aforementioned characteristics. Control of machine performance may range from manual operation to that of automatic cycling and tape or computer control. May perform machine language editing. Acquires and installs holding devices, jigs, fixtures, accessories, measuring instruments, and cutting tools necessary to the performance of the task. May be required to perform set-up and operation of a flexible manufacturing system and simultaneous operation of more than one electrical discharge machine, deburr operations and open set-up machining. Work requires close tolerances and fine finishes. Works from prints, sketches, specifications, job layouts, written and/or oral instructions. Practices good workmanship and makes proper utilization and selection of speeds, feeds, wheels, cams, grinding angles, and cutting tools when not prescribed. May be required to machine locating surfaces and tool clearance reliefs on soft jaws, face plates, collets and fixture bases, or other general purpose holding devices when they are to be used for fabrication of product prior to removal from equipment. Recognizes tool wear and replaces or changes worn tools. May in conjunction with flexible manufacturing system inventory, order and maintain a supply of cutting tools, measuring probes and accessories. May be required to dress own grinding wheels to restore the working surface to original condition. May be required to prepare material for machine operations such as sawing, grinding and lapping. Uses all necessary tools, fixtures and gages and where required performs minor touch-up, hand grinding and honing of tools. May perform sand blast operations as required. May perform hand work such as straightening/forming or radiusing/blending. Must have a working knowledge of shop mathematics. Responsible for checking produced parts to standards furnished for the operation. May be required to do rework and perform in-process packaging. Performs necessary tasks and paperwork for the proper movement and control of parts and material in conjunction with flexible manufacturing systems, including hand or electric trucking. Responsible for maintenance of departmental accessory storage areas. Responsible for maintenance of departmental accessory storage areas. May perform in-process inspection. May check and top off lubricants as necessary. You Must Have US Citizenship, able to obtain and maintain US DOE Q level security clearance High School Diploma or GED Ability to work any shift Machine Tool Technology or Mill and Lathe Certification from Accredited College OR two (2) or more years experience in machining complex parts and assemblies OR applicable military experience We Value Three (3) or more years experience in a manufacturing or military environment with demonstrated ability to work an excel in a team environment Demonstrated ability to work with limited guidance Demonstrated written and oral communication skills with experience using Microsoft Office applications, including MS Excel, Outlook, Word, and PowerPoint 5-axis machining programming and operation experience Experience running lathes, mills, grinders, drills and other machining equipment Experience setting-up and operating CNC machinery in a production environment Experience reading and interpreting drawings (GD&T), schematics, specifications and CAD files and translating into MasterCam programming (or equivalent software) and setup for CNC machinery Experience in the use of various measuring instruments to include micrometers, bore gauges, calipers, comparators, or other instruments #FMT2021 This job description/job posting is not all inclusive and other duties may be assigned. Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status. If you require a reasonable accommodation to submit an application, please send an email to our Reasonable Accommodation Support Team at **********************. To learn more about our benefits and culture follow the link below: *************************************************** Additional Information: Job ID: 3770 Category: Integrated Supply Chain Level of Experience: Posting Location: Kansas City National Security Campus 14520 Botts Road Kansas City, MO, 64147 Remote Eligibility: On-Site Travel Required: 0-10% Approved Work States: MO Hourly/Salary: Hourly

Job Description The Building Maintenance Technician is responsible for performing regular and emergency repairs to keep all building's systems, structures and grounds in safe, good working order. Hours: 40 hours/week Monday - Friday 7am-4pm May require evenings and weekends as needed for emergencies or special projects *Hours may vary based on business needs Duties and Responsibilities: Perform routine maintenance and repairs on mechanical, electrical, and plumbing systems. This includes but is not limited to changing light bulbs, fixing leaks, and inspecting equipment. Perform a wide range of repairs, which may include carpentry, painting, drywall, and light masonry work. Respond promptly to maintenance requests and emergency repair situations. Maintain grounds and common areas as needed. Always ensure compliance with safety codes and security. Coordinate with outside contractors and vendors as required. Back up to courier. Any other duties as assigned. Requirements: High School diploma or equivalent required. Valid Wisconsin drivers license. 1-3 years' experience in minor mechanical/electrical repairs and building maintenance preferred. Must comply with applicable laws and regulations, including but not limited to, Anti-Money Laundering/Countering the Financing of Terrorism (AML/CFT Act) and the requirements of the Office of Foreign Assets Control. Additionally, all employees must follow policies and procedures to minimize risk by exercising good judgment, raising questions to management, and adhering to policy guidelines. Critical Competencies: Multitask Prioritize Problem solving Time management ****Equal Opportunity Employer of Minorities, Females, Protected Veterans, and Individuals with Disabilities**** Our company is an equal opportunity/affirmative action employer. Applicants can learn more about their rights by viewing the federal EEO poster at ********************************************************************************************

The Building Maintenance Technician is responsible for performing regular and emergency repairs to keep all building's systems, structures and grounds in safe, good working order. Hours: 40 hours/week Monday - Friday 7am-4pm May require evenings and weekends as needed for emergencies or special projects *Hours may vary based on business needs Duties and Responsibilities: Perform routine maintenance and repairs on mechanical, electrical, and plumbing systems. This includes but is not limited to changing light bulbs, fixing leaks, and inspecting equipment. Perform a wide range of repairs, which may include carpentry, painting, drywall, and light masonry work. Respond promptly to maintenance requests and emergency repair situations. Maintain grounds and common areas as needed. Always ensure compliance with safety codes and security. Coordinate with outside contractors and vendors as required. Back up to courier. Any other duties as assigned. Requirements: High School diploma or equivalent required. Valid Wisconsin drivers license. 1-3 years' experience in minor mechanical/electrical repairs and building maintenance preferred. Must comply with applicable laws and regulations, including but not limited to, Anti-Money Laundering/Countering the Financing of Terrorism (AML/CFT Act) and the requirements of the Office of Foreign Assets Control. Additionally, all employees must follow policies and procedures to minimize risk by exercising good judgment, raising questions to management, and adhering to policy guidelines. Critical Competencies: Multitask Prioritize Problem solving Time management ****Equal Opportunity Employer of Minorities, Females, Protected Veterans, and Individuals with Disabilities**** Our company is an equal opportunity/affirmative action employer. Applicants can learn more about their rights by viewing the federal EEO poster at ********************************************************************************************

Under general supervision, answers questions and provides information to the public regarding water bills, payment schedules and other services provided; sets up water utility accounts for new customers; and creates work orders for field crews. ESSENTIAL JOB FUNCTIONS: 1. Ability to set up water utility accounts for new customers; ability to create and process work orders for field crews including meter maintenance, re-reads, leakage, etc. 2. Ability to answer questions and provide information to the public regarding billings, payment schedules and other services provided; ability to arrange payment agreements up to $300. 3. Ability to accept payments from walk-in customers, enter payment information into system for immediate posting and provide receipts to customers; ability to accept payments for other services such as specification book sales, plat review abatement charges, and 3-way city contract payments from other cities. 4. Ability to operate mail opening and remittance processing equipment to post payments received; ability to open and sort payments received by mail and check amounts for irregularities. OTHER JOB FUNCTIONS: 5. Ability to balance cash drawers and prepare bank deposits; ability to research and prepare account audits; ability to process bank drafting requests. 6. Ability to perform related duties such as processing requests for sewer line repairs, processing charitable contributions, handling returned mail, and other miscellaneous assignments. MINIMUM QUALIFICATIONS: Knowledge, Skills and Abilities Required: Knowledge of proper English, spelling and punctuation. Knowledge of automated systems for billing on accounts, on-line cashiering and work management. Knowledge of computer applications, computer equipment usage, and cash management protocol. Skill in the investigation and determination of facts. Skill in processing multiple requests quickly. Skill in accurately entering data and properly coding data to achieve desired results. Skill in performing complex calculations involving fee and rate structures. Skill in typing 30-35 wpm. Ability to listen and ascertain customer needs. Ability to determine equitable solutions for customers in need. Ability to count money and give correct change. Ability to organize detailed information. Ability to perform a variety of physical skills including, but not limited to filing, hearing, seeing, and writing by hand. Ability to operate a variety of office equipment including, but not limited to mainframe terminal/ PC, telephone, calculator. May be assigned to position that operates a remittance processor, mail opener, and cash register. Qualifying Education and Experience: A high school education. A minimum of two years experience in customer service, cashier or general office work, or any equivalent combination of education and/or experience.