Steel worker jobs near me - 9 jobs

Iron Worker/ Welder Basic Scope/Purpose Raises, places, and unites beams, columns, and other structural steel members to form completed structures or structure frameworks, working as member of crew. Essential Functions/Duties * Sets up hoisting equipment for raising and placing structural steel members. * Fastens steel members to cable of hoist, using chain, cable, or rope. * Signals worker operating hoisting equipment to lift and place steel member. * Guides member, using tag line (rope). * Pulls, pushes, or pries steel members into approximate position while member is supported by hoisting device. * Forces members into final position, using turnbuckles, crowbars, jacks, and hand tools. * Aligns holes in member with corresponding holes in previously placed member by drifting drift pins or handle of wrench through holes. * Verifies vertical and horizontal alignment of members, using plumb bob and level. * Bolts aligned members to keep them in position until they can be permanently bolted or welded in place. * Alter steel members. * Detect, recognize and respond to dangerous conditions or situations. * Regular attendance is required. * Significant travel may be required. * Performs other duties as required. Working Conditions/Physical Effort Conditions include working in office, shop, busy traffic areas, warehouses, and undeveloped properties, with frequent exposure to dirt, dust, grease, oil, vibrations, and adverse weather conditions. Must be able to safely access all areas of property, buildings, structures, wharves, rooftops and other elevated positions, as well as, confined spaces. Must be able to effectively use all required PPE equipment and lift up to fifty pounds. Strenuous physical demands are required to safely perform the essential functions associated with this position. Must be able to safely operate all involved equipment and tools. Must be capable of standing for long periods of time, bending consistently, working in confined spaces with limited access, on ladders, in personnel lifts, in workboats, and working in awkward body positions. Tool List Tool Box with Lock, 12" Crescent Wrench, 2"-1 ¼" Spud Crescent w/ carrier, 25' Tape Measure, 1 7/16" Spud Wrench, 4lb to 6lb Hammer Double Faced with carrier, Bolt Bag, Tri Square, Framing Square, Center Punch, 12"x24" Framing Square, 50' to 100' Tape, 8" Side Cutters, Sliding T-Bevel, Hacksaw, Set of Allen Wrenches, 3" C-Clamps, Line Up Bar, 2' Level, 15" Crescent Wrench, 6" x12" Framing Square, Spud Bar/Sleever Bar, Bull Pin with Carrier, Vice Grips, Chalk Box and Line, 8" C-Clamps, Torpedo Magnetic Level, 16oz Plumb Bob, Large Wedges, 2 - Small Wedges: 1 7/16 Spud & 1 5/16 Spud, 12 lb Beater * Nothing in this job description restricts the Company's right to assign or reassign duties and responsibilities to this job at any time. Century Contractors offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. EOE M/F/Vet/Disabled Century Contractors, Inc. will recruit, hire, train, and advance in employment qualified individuals in all job titles without regard to race, color, national origin, gender, sexual orientation, gender identity, religion, age, status as a protected veteran, or status as an individual with a disability; and shall not discriminate against any individual, nor any such characteristic as applicable by law. Consistent with the Americans with Disabilities Act, applicant may request accommodations needed to participate in the application process. Century requires drug testing and background screening on all applicants offered work. Please note: Century participates in the E-Verify program Equal Opportunity Employer, including disabled and veterans. If you want to view the Know Your Rights: Workplace Discrimination is Illegal poster, please choose your language: English - Spanish - Arabic - Chinese English - Spanish - Chinese If you want to view the Pay Transparency Policy Statement, please click the link: English View Company Information To see other positions, click here.

We are seeking skilled and safety-driven Ironworkers to join our construction team. The ideal candidate will assist in the installation, fabrication, and placement of structural and reinforcing steel on a variety of projects. Responsibilities: Erect, place, and connect structural steel components according to blueprints and drawings. Cut, bend, and weld steel pieces as required for installation. Install reinforcing steel (rebar) in concrete forms. Bolt or weld metal structures and ensure proper alignment and fit. Operate hoisting equipment and work at elevated heights safely. Inspect work and materials for compliance with specifications and safety standards. Alignment to Clark Standards of Excellence: Self-Motivated, Results Oriented, Adaptable, Team Player, Accountable, Ethical, Innovative, Resilient, Builds Relationships Qualifications: Proven experience as an Ironworker in commercial or industrial construction. Ability to read and interpret blueprints, drawings, and specifications. Strong understanding of safety procedures and fall protection. Physical ability to lift heavy materials and work at heights. OSHA certification or related safety training preferred. Physical Demands The physical demands described below are representative of those necessary for an employee to successfully perform the essential functions of this role on a construction site. This role requires significant physical exertion, including the ability to navigate active construction areas with uneven terrain, temporary and permanent stairs, ladders, scaffolding, and personnel hoists. Constant standing, walking, and performing repetitive physical tasks are required daily. The employee must frequently lift, carry, push, and pull materials and equipment weighing up to 50 pounds and occasionally lift and/or move objects weighing over 50 pounds with assistance or team lifting techniques. This position requires frequent bending, stooping, kneeling, crouching, climbing, and reaching (above and below shoulder level). The employee must possess sufficient physical dexterity and balance to work safely at various heights and in confined spaces. Visual acuity (including close, distance, peripheral, and depth perception, and the ability to adjust focus) is essential for tasks such as reading instructions, operating equipment, and ensuring safety. Adequate hearing (with or without assistive devices) is required to understand instructions and warnings in a noisy environment. Work Environment The work environment characteristics described below are representative of those an employee encounter while performing the essential functions of this role at a Clark Construction site. The employee will regularly work outdoors and may be exposed to varying and potentially extreme weather conditions, including heat, cold, wind, rain, and snow. The work environment frequently involves exposure to moving mechanical equipment, high noise levels, dust, fumes, airborne particles, vibrations, and potential electrical hazards. Work regularly occurs at heights and in confined spaces. The employee must be able to work safely around heavy equipment and construction traffic. The noise level in the work environment is typically loud, requiring the consistent use of appropriate personal protective equipment (PPE), including hearing protection, and adherence to all Clark Construction's comprehensive safety policies, procedures, and all applicable federal, state, and local laws. Due to the nature of the projects, deadlines, and client's requirements, the role frequently requires working more than 40 hours per week.

Description: About Us: Structural Iron Erectors (SIE) is a leading fabricator and supplier of all types of steel used in many major construction projects such as large scale commercial and residential buildings. Our quality is visible throughout the Metropolitan area of Washington D.C., Virginia, and Maryland. At SIE, we are committed to fostering a safe and productive work environment. SIE is seeking a highly skilled Iron Worker to join our team. The Iron Worker is critical to the success of our construction projects. Job Summary: The Iron Worker is responsible for welding structural and miscellaneous steel components according to project specifications. This role requires precision, a strong understanding of welding codes, and the ability to work in a fast-paced fabrication environment. Supervisory Responsibilities: None Duties/Responsibilities: Perform MIG, and Stick welding on steel components. Read and interpret blueprints, drawings, and specifications to determine layout and installation requirements. Weld structural steel components using FCAW, SMAW, or GMAW processes. Follow shop drawings, welding symbols, and AISC/AWS D1.1 welding codes. Ensure welds meet project specifications and safety standards. Inspect completed work to ensure compliance with plans, specifications, and quality standards. Set up, operate, and maintain welding equipment and tools. Conduct visual inspections and participate in quality assurance processes. Install decking, stairs, handrails, and other fabricated components. Maintain a clean, organized, and safe work area. Performing other duties as assigned by the Foreman and/or Superintendent. Perform and maintain health and safety rules for a safe work environment. Use the PPE (Personal protective equipment) equipment. Ensure compliance with OSHA and company-specific safety procedures. Requirements: Qualifications: High school diploma or equivalent. Ability to read and interpret structural blueprints and welding symbols. Familiarity with standard shop tools, measuring devices, and fabrication equipment. Ability to pass a welding test. Commitment to safety and quality. Travel Requirements: Travel as required by job site. Physical Requirements: Be physically active for long periods without getting tired or out of breath. Bend, stretch, twist, or reach out. Keep or regain the body's balance or stay upright when in an unstable position. See objects in very bright or glaring light. Equal Opportunity Employer: SIE is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, national origin, age, disability, or any other status protected by law. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Performs any combination of following duties to raise, place, and unite girders, columns, and other structural-steel members to form completed structures or structure frameworks, working as member of crew. Job Function (s) Actively supports the Company's commitment to safety and its Core Values. Represent the Company at all times with high moral standards while adhering to the Company's Code of Business Conduct and Ethics. Sets up hoisting equipment for raising and placing structural-steel members. Signals worker operating hoisting equipment to lift and place steel member. Must be able to direct and perform, using tag line (rope), fixtures and parts for the installation Aligns bolt holes in member with corresponding holes in previously placed member by driving drift pins or handle of wrench through holes. Verifies vertical and horizontal alignment of structural steel, using plumb bob and level. Must be able to bold-up and connect Structural Steel Iron and I-beams. Must be able to cut, fit and fabricate all kinds of structural steel iron. Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards. Perform all other job-related duties as requested by supervision. Qualifications: Minimum of three (3) years or more in refinery maintenance/turnaround/or construction experience Sets up hoisting equipment for raising and placing structural-steel members. Ability to bold-up and connect Structural Steel Iron and I-beams. Ability to cut, fit and fabricate all kinds of structural steel iron. Must be able to direct and perform, using tag line (rope), fixtures and parts for the installation General knowledge of basic hand tools. Must be able to complete the NCCER certification for your craft. Must be able to complete the Matrix Service Safety training and Client / Site specific training. Must be able to obtain and maintain an active status within the DISA drug testing program. Physical Requirements: Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting. Will talk and hear to communicate. Must have good dexterity with hands and fingers to perform the precision adjustments of machinery parts and controls. Will use arms and hands to signal, grab, hold, turn, push, pull objects, materials, controls and tools. May be required to lift, carry and move up to 50lbs. Will occasionally work at heights, climb ladders and stairways and work off of platforms. Will work at heights up to 300' utilizing proper fall protection. Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. Must be capable of working outside in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long period of times up to 12 hours a day. Will be required to wear personal protective equipment (PPE) including but not limited to hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. Physical Requirements: Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting. Will talk and hear to communicate. Must have good dexterity with hands and fingers to perform the precision adjustments of machinery parts and controls. Will use arms and hands to signal, grab, hold, turn, push, pull objects, materials, controls and tools. May be required to lift, carry and move up to 50lbs. Will occasionally work at heights, climb ladders and stairways and work off of platforms. Will work at heights up to 300' utilizing proper fall protection. Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. Must be capable of working outside in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long period of times up to 12 hours a day. Will be required to wear personal protective equipment (PPE) including but not limited to hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. EEO/M/F/Disability/Vets/Affirmative Action Employer We are an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

We are seeking skilled and safety-driven Ironworkers to join our construction team. The ideal candidate will assist in the installation, fabrication, and placement of structural and reinforcing steel on a variety of projects. Responsibilities: * Erect, place, and connect structural steel components according to blueprints and drawings. * Cut, bend, and weld steel pieces as required for installation. * Install reinforcing steel (rebar) in concrete forms. * Bolt or weld metal structures and ensure proper alignment and fit. * Operate hoisting equipment and work at elevated heights safely. * Inspect work and materials for compliance with specifications and safety standards. * Alignment to Clark Standards of Excellence: Self-Motivated, Results Oriented, Adaptable, Team Player, Accountable, Ethical, Innovative, Resilient, Builds Relationships Qualifications: * MUST JOIN THE LOCAL UNION * Proven experience as an Ironworker in commercial or industrial construction. * Ability to read and interpret blueprints, drawings, and specifications. * Strong understanding of safety procedures and fall protection. * Physical ability to lift heavy materials and work at heights. * OSHA certification or related safety training preferred. Physical Demands The physical demands described below are representative of those necessary for an employee to successfully perform the essential functions of this role on a construction site. This role requires significant physical exertion, including the ability to navigate active construction areas with uneven terrain, temporary and permanent stairs, ladders, scaffolding, and personnel hoists. Constant standing, walking, and performing repetitive physical tasks are required daily. The employee must frequently lift, carry, push, and pull materials and equipment weighing up to 50 pounds and occasionally lift and/or move objects weighing over 50 pounds with assistance or team lifting techniques. This position requires frequent bending, stooping, kneeling, crouching, climbing, and reaching (above and below shoulder level). The employee must possess sufficient physical dexterity and balance to work safely at various heights and in confined spaces. Visual acuity (including close, distance, peripheral, and depth perception, and the ability to adjust focus) is essential for tasks such as reading instructions, operating equipment, and ensuring safety. Adequate hearing (with or without assistive devices) is required to understand instructions and warnings in a noisy environment. Work Environment The work environment characteristics described below are representative of those an employee encounter while performing the essential functions of this role at a Clark Construction site. The employee will regularly work outdoors and may be exposed to varying and potentially extreme weather conditions, including heat, cold, wind, rain, and snow. The work environment frequently involves exposure to moving mechanical equipment, high noise levels, dust, fumes, airborne particles, vibrations, and potential electrical hazards. Work regularly occurs at heights and in confined spaces. The employee must be able to work safely around heavy equipment and construction traffic. The noise level in the work environment is typically loud, requiring the consistent use of appropriate personal protective equipment (PPE), including hearing protection, and adherence to all Clark Construction's comprehensive safety policies, procedures, and all applicable federal, state, and local laws. Due to the nature of the projects, deadlines, and client's requirements, the role frequently requires working more than 40 hours per week.

Performs any combination of following duties to raise, place, and unite girders, columns, and other structural-steel members to form completed structures or structure frameworks, working as member of crew. Job Function (s) * Actively supports the Company's commitment to safety and its Core Values. * Represent the Company at all times with high moral standards while adhering to the Company's Code of Business Conduct and Ethics. * Sets up hoisting equipment for raising and placing structural-steel members. * Signals worker operating hoisting equipment to lift and place steel member. * Must be able to direct and perform, using tag line (rope), fixtures and parts for the installation * Aligns bolt holes in member with corresponding holes in previously placed member by driving drift pins or handle of wrench through holes. * Verifies vertical and horizontal alignment of structural steel, using plumb bob and level. * Must be able to bold-up and connect Structural Steel Iron and I-beams. * Must be able to cut, fit and fabricate all kinds of structural steel iron. * Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards. * Perform all other job-related duties as requested by supervision. Qualifications: * Minimum of three (3) years or more in refinery maintenance/turnaround/or construction experience * Sets up hoisting equipment for raising and placing structural-steel members. * Ability to bold-up and connect Structural Steel Iron and I-beams. * Ability to cut, fit and fabricate all kinds of structural steel iron. * Must be able to direct and perform, using tag line (rope), fixtures and parts for the installation * General knowledge of basic hand tools. * Must be able to complete the NCCER certification for your craft. * Must be able to complete the Matrix Service Safety training and Client / Site specific training. * Must be able to obtain and maintain an active status within the DISA drug testing program. Physical Requirements: * Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting. * Will talk and hear to communicate. * Must have good dexterity with hands and fingers to perform the precision adjustments of machinery parts and controls. * Will use arms and hands to signal, grab, hold, turn, push, pull objects, materials, controls and tools. * May be required to lift, carry and move up to 50lbs. * Will occasionally work at heights, climb ladders and stairways and work off of platforms. Will work at heights up to 300' utilizing proper fall protection. * Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. * Must be capable of working outside in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long period of times up to 12 hours a day. * Will be required to wear personal protective equipment (PPE) including but not limited to hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. Physical Requirements: * Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting. * Will talk and hear to communicate. * Must have good dexterity with hands and fingers to perform the precision adjustments of machinery parts and controls. * Will use arms and hands to signal, grab, hold, turn, push, pull objects, materials, controls and tools. * May be required to lift, carry and move up to 50lbs. * Will occasionally work at heights, climb ladders and stairways and work off of platforms. Will work at heights up to 300' utilizing proper fall protection. * Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. * Must be capable of working outside in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long period of times up to 12 hours a day. * Will be required to wear personal protective equipment (PPE) including but not limited to hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. EEO/M/F/Disability/Vets/Affirmative Action Employer We are an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

We are seeking skilled and safety-driven Ironworkers to join our construction team. The ideal candidate will assist in the installation, fabrication, and placement of structural and reinforcing steel on a variety of projects. **Responsibilities:** + Erect, place, and connect structural steel components according to blueprints and drawings. + Cut, bend, and weld steel pieces as required for installation. + Install reinforcing steel (rebar) in concrete forms. + Bolt or weld metal structures and ensure proper alignment and fit. + Operate hoisting equipment and work at elevated heights safely. + Inspect work and materials for compliance with specifications and safety standards. + Alignment to Clark Standards of Excellence: Self-Motivated, Results Oriented, Adaptable, Team Player, Accountable, Ethical, Innovative, Resilient, Builds Relationships **Qualifications:** + Proven experience as an Ironworker in commercial or industrial construction. + Ability to read and interpret blueprints, drawings, and specifications. + Strong understanding of safety procedures and fall protection. + Physical ability to lift heavy materials and work at heights. + OSHA certification or related safety training preferred. **Physical Demands** The physical demands described below are representative of those necessary for an employee to successfully perform the essential functions of this role on a construction site. This role requires significant physical exertion, including the ability to navigate active construction areas with uneven terrain, temporary and permanent stairs, ladders, scaffolding, and personnel hoists. Constant standing, walking, and performing repetitive physical tasks are required daily. The employee must frequently lift, carry, push, and pull materials and equipment weighing up to 50 pounds and occasionally lift and/or move objects weighing over 50 pounds with assistance or team lifting techniques. This position requires frequent bending, stooping, kneeling, crouching, climbing, and reaching (above and below shoulder level). The employee must possess sufficient physical dexterity and balance to work safely at various heights and in confined spaces. Visual acuity (including close, distance, peripheral, and depth perception, and the ability to adjust focus) is essential for tasks such as reading instructions, operating equipment, and ensuring safety. Adequate hearing (with or without assistive devices) is required to understand instructions and warnings in a noisy environment. **Work Environment** The work environment characteristics described below are representative of those an employee encounter while performing the essential functions of this role at a Clark Construction site. The employee will regularly work outdoors and may be exposed to varying and potentially extreme weather conditions, including heat, cold, wind, rain, and snow. The work environment frequently involves exposure to moving mechanical equipment, high noise levels, dust, fumes, airborne particles, vibrations, and potential electrical hazards. Work regularly occurs at heights and in confined spaces. The employee must be able to work safely around heavy equipment and construction traffic. The noise level in the work environment is typically loud, requiring the consistent use of appropriate personal protective equipment (PPE), including hearing protection, and adherence to all Clark Construction's comprehensive safety policies, procedures, and all applicable federal, state, and local laws. Due to the nature of the projects, deadlines, and client's requirements, the role frequently requires working more than 40 hours per week. Clark Construction Group is one of the largest building and infrastructure companies in the United States. Our portfolio spans every major building market, from public to private, corporate to cultural, education to entertainment, and the infrastructure connecting it all - power, transportation, water, and roadways. Since 1906, we've been delighting and delivering value to our clients and project partners, providing diverse opportunities for our team, and strengthening the communities where we live. With offices strategically located across the country, we pride ourselves on being a local builder with national reach. Learn more about Clark Construction (*********************************** . There is a sense of camaraderie that comes with delivering impactful projects as a team. It creates a sense of humility and fosters pride in the work we do. At Clark, we are proud to build what matters, together. Learn more about careers at Clark (****************************************** . Find even more opportunities with the Clark Group, our collection of companies - delivering construction and asset solutions for clients across the United States. Clark Group's capabilities span the entire asset lifecycle - from project development and financing to construction and facility maintenance. **_Asset Solutions_** **Altura Associates (********************************************* **Coda** **Edgemoor Infrastructure & Real Estate (************************************************ **S2N Technology Group** _Building & Infrastructure_ **Atkinson Construction (*********************************************** **Shirley Contracting Company** **C3M Power Systems (************************************************** **_Equal Opportunity Employer_** Clark Construction Group, LLC (and its subsidiaries and affiliates) is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, age, national origin, religion, physical and mental disability, genetic information, marital status, sexual orientation, gender identity, citizenship, pregnancy or maternity, protected veteran status, or any other status prohibited by applicable national, federal, state or local law. Clark promotes a drug-free workplace. Applicants have rights under Federal Employment Laws: Family and Medical Leave Act (FMLA), Equal Employment Opportunity (EEO), and Employee Polygraph Protection Act (EPPA). Clark is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please email ************************************ or call ************** and let us know the nature of your request and your contact information. **_Authorization to Work_** Applicants must be currently authorized to work in the US on a full-time basis in order to be considered. Equal Opportunity Employer: Clark Construction Group, LLC, (subsidiaries and affiliates) is an Equal Opportunity Employer committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to sex, race, color, age, national origin, religion, physical and mental disability, genetic information, marital status, sexual orientation, gender identity/assignment, citizenship, pregnancy or maternity, protected veteran status, or any other status prohibited by applicable national, federal, state or local law. Clark Construction promotes a drug-free workplace.

We are seeking skilled and safety-driven Ironworkers to join our construction team. The ideal candidate will assist in the installation, fabrication, and placement of structural and reinforcing steel on a variety of projects. **Responsibilities:** + Erect, place, and connect structural steel components according to blueprints and drawings. + Cut, bend, and weld steel pieces as required for installation. + Install reinforcing steel (rebar) in concrete forms. + Bolt or weld metal structures and ensure proper alignment and fit. + Operate hoisting equipment and work at elevated heights safely. + Inspect work and materials for compliance with specifications and safety standards. + Alignment to Clark Standards of Excellence: Self-Motivated, Results Oriented, Adaptable, Team Player, Accountable, Ethical, Innovative, Resilient, Builds Relationships **Qualifications:** + **MUST JOIN THE LOCAL UNION** + Proven experience as an Ironworker in commercial or industrial construction. + Ability to read and interpret blueprints, drawings, and specifications. + Strong understanding of safety procedures and fall protection. + Physical ability to lift heavy materials and work at heights. + OSHA certification or related safety training preferred. **Physical Demands** The physical demands described below are representative of those necessary for an employee to successfully perform the essential functions of this role on a construction site. This role requires significant physical exertion, including the ability to navigate active construction areas with uneven terrain, temporary and permanent stairs, ladders, scaffolding, and personnel hoists. Constant standing, walking, and performing repetitive physical tasks are required daily. The employee must frequently lift, carry, push, and pull materials and equipment weighing up to 50 pounds and occasionally lift and/or move objects weighing over 50 pounds with assistance or team lifting techniques. This position requires frequent bending, stooping, kneeling, crouching, climbing, and reaching (above and below shoulder level). The employee must possess sufficient physical dexterity and balance to work safely at various heights and in confined spaces. Visual acuity (including close, distance, peripheral, and depth perception, and the ability to adjust focus) is essential for tasks such as reading instructions, operating equipment, and ensuring safety. Adequate hearing (with or without assistive devices) is required to understand instructions and warnings in a noisy environment. **Work Environment** The work environment characteristics described below are representative of those an employee encounter while performing the essential functions of this role at a Clark Construction site. The employee will regularly work outdoors and may be exposed to varying and potentially extreme weather conditions, including heat, cold, wind, rain, and snow. The work environment frequently involves exposure to moving mechanical equipment, high noise levels, dust, fumes, airborne particles, vibrations, and potential electrical hazards. Work regularly occurs at heights and in confined spaces. The employee must be able to work safely around heavy equipment and construction traffic. The noise level in the work environment is typically loud, requiring the consistent use of appropriate personal protective equipment (PPE), including hearing protection, and adherence to all Clark Construction's comprehensive safety policies, procedures, and all applicable federal, state, and local laws. Due to the nature of the projects, deadlines, and client's requirements, the role frequently requires working more than 40 hours per week. Clark Construction Group is one of the largest building and infrastructure companies in the United States. Our portfolio spans every major building market, from public to private, corporate to cultural, education to entertainment, and the infrastructure connecting it all - power, transportation, water, and roadways. Since 1906, we've been delighting and delivering value to our clients and project partners, providing diverse opportunities for our team, and strengthening the communities where we live. With offices strategically located across the country, we pride ourselves on being a local builder with national reach. Learn more about Clark Construction (*********************************** . There is a sense of camaraderie that comes with delivering impactful projects as a team. It creates a sense of humility and fosters pride in the work we do. At Clark, we are proud to build what matters, together. Learn more about careers at Clark (****************************************** . Find even more opportunities with the Clark Group, our collection of companies - delivering construction and asset solutions for clients across the United States. Clark Group's capabilities span the entire asset lifecycle - from project development and financing to construction and facility maintenance. **_Asset Solutions_** **Altura Associates (********************************************* **Coda** **Edgemoor Infrastructure & Real Estate (************************************************ **S2N Technology Group** _Building & Infrastructure_ **Atkinson Construction (*********************************************** **Shirley Contracting Company** **C3M Power Systems (************************************************** **_Equal Opportunity Employer_** Clark Construction Group, LLC (and its subsidiaries and affiliates) is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, age, national origin, religion, physical and mental disability, genetic information, marital status, sexual orientation, gender identity, citizenship, pregnancy or maternity, protected veteran status, or any other status prohibited by applicable national, federal, state or local law. Clark promotes a drug-free workplace. Applicants have rights under Federal Employment Laws: Family and Medical Leave Act (FMLA), Equal Employment Opportunity (EEO), and Employee Polygraph Protection Act (EPPA). Clark is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please email ************************************ or call ************** and let us know the nature of your request and your contact information. **_Authorization to Work_** Applicants must be currently authorized to work in the US on a full-time basis in order to be considered. Equal Opportunity Employer: Clark Construction Group, LLC, (subsidiaries and affiliates) is an Equal Opportunity Employer committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to sex, race, color, age, national origin, religion, physical and mental disability, genetic information, marital status, sexual orientation, gender identity/assignment, citizenship, pregnancy or maternity, protected veteran status, or any other status prohibited by applicable national, federal, state or local law. Clark Construction promotes a drug-free workplace.