Quality Assurance Technician jobs at Stoughton Trailers - 664 jobs

Job Title: Quality Inspector Duration: 06 Months contract (Potential Temp to Perm) Payrate: $23.75/hr. Shift: 2nd shift, Mon-Fri, 1:45pm-10:15pm Description: Responsible for performing and recording dimensional and visual inspection of parts, assemblies, and final product in coordination with the Engineering, Production, and Manufacturing Engineering departments. Responsibilities: Conduct all levels of product inspections using a variety of inspection instruments and equipment (e.g. CMM, micrometers, calipers, parallels, sine bars, height masters, optical comparator, Johnson gauges, etc.) Verify compliance of finished hardware with drawing requirements based on shop practices as they relate to unfinished hardware. Perform both detailed, assembly-level drawings with appropriate supporting documentation verifying actual results against drawing and/or specification requirements. Correctly read and interpret detailed, assembly-level drawings and customer specifications. Use shop mathematical calculations relative to the complexity of the project (e.g., GD&T, tolerance stack-ups, calculations for areas, angles, lengths, etc.) Execute formal first article reports to AS9102 standards. Mentor inspectors, as needed. Use statistical process control (SPC) symbols and tools along with correct interpretation of associated control plans and charts. Meet deadlines of assigned jobs while maintaining the integrity of the position. Work closely with customer representatives during source inspections and audits. Seek lean process improvements. Requirements: High school diploma/GED 1 year certificate from college or technical school OR 3-5 years related experience and/or training US Citizenship required Skills: Good written and verbal communication skills Excellent problem-solving and analytical skills Keen attention to detail Ability to understand and conform to internal company procedures. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Familiarity with but not limited to: Database, Basic windows/internet browser, ERP/Inventory, Microsoft Office - Excel, Word, Power Point, Blueprint Reading, GD&T Terminology and Symbols, Material finishes, Raw Materials, Mechanical Inspection Blueprint reading capabilities Ability to lift 40lbs Teamwork and collaboration

Under the direction of the Lead Manufacturing Supervisor, the Processing Technician 2 is responsible for supporting the injection molding departments' operational goals. The primary responsibilities of this role will include Start-up of all down machines when ready, attending and actively participating in tech meetings, housekeeping, checking process parameters while ensuring all alarms are on and active, submitting first pieces to the Quality Lab, completing material changes, and setting scales. The Processing Technician 2 will provide troubleshooting support to the production group to correct problems. This role will act as the liaison between Production and the Process Engineering dept. This will be achieved by maintaining HellermannTyton's Quality and EHS certifications by supporting all corporate policies, procedures, work instructions and required documentation. Essential Functions: Troubleshooting, diagnosing and making recommendations for processing issues. Starting up presses after; changes (mold changes, conversions, material changes, etc.), rehangs, repairs, mold cleans, or other reasons Regrind and scrap management Assistance with Automation alarms and troubleshooting Enter all downtime and scrap codes accurately for future analysis using the Process Monitoring System (Mattec) as needed. Work with the Industrial Engineering team to ensure proper documentation is created and distributed regarding process sheets and deviations. Respond to inquiries and communicate with other company personnel using the company provided radio as well as follow radio etiquette and policy on a daily basis. Housekeeping (including purge, scrap parts, etc.) and proper storage of equipment, supplies etc. Assist in maintaining HellermannTyton's certifications by supporting: Corporate policies, procedures, work instructions, and required documentation. Other Functions Other duties may be assigned. Evaluate current state processing conditions and recommend improvement plans as needed. Developing procedures for production related duties that may be used as reference/training materials. Work on audit preparedness for both internal and external audits. Assist in maintaining HellermannTyton's certifications by supporting all corporate policies, procedures and work instructions. Success in this role will require Must have strong troubleshooting skills Ability to communicate with all levels of the organization. Must be detail orientated. Proven ability to work independently or within a team. Strong computer skills. Extensive knowledge of scientific injection molding principles and techniques. Extensive knowledge of DOE principles and techniques. Proven ability to prioritize and multi task. What You'll Bring High school diploma or equivalency, required. 3+ years experience as a Process Technician preferred. Must have demonstrated time management skills. Strong communication and interpersonal skills. Excellent mechanical skills required. Must be able to lift push, and pull up to 75 lbs. and be able to stand/walk for 12 hours. Must be able to stand. Walk, and work for up to 12-hour shifts. Excellent troubleshooting skills required. Knowledge of SPC principles. Advanced education in the area of injection molding such as WCTC Apprenticeship program, Paulson Training, RJG training, etc. preferred Rev. 6.17.2025 #LI-Onsite #LI-KN1 By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position. HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

Under the direction of the Quality Lab Supervisor, with guidance from the Quality Lab Tech Lead, the Quality Assurance Lab Technician is responsible for the completion of testing and inspection, dimensional analysis and support of other departments within HellermannTyton. This position requires the Technician be able to complete product/process inspections in a product enviornment as well as a lab environment while managing files and software. Overtime will be required including some weekend hours. This position will also maintain HellermannTyton's TS16949/ISO14001/EMS certifications by supporting all corporate policies, procedures, work instructions and required documentation. Essential Functions: Understand Customer Expectations as they relate to Product Quality Thrive in and help support a Team Atmosphere Help support the HellermannTyton Team by mentoring Operators regarding Quality of Product Perform 1st Piece Inspection of manufactured product Perform in-process inspection of manufactured product Perform Product specific tests including but not limited to tensile Perform moisture analysis on manufacutured product as well as incoming Verify Material Certification and Approve raw material Enter and edit SPC data in the SPC computer file File all QA records and samples (obsolete and current). Use incoming color chip samples to verify colorant in receiving Handle non-conforming material isolation and documentation Perform a dimensional layout referencing the HellermannTyton drawing Use SPC software Record all inspection and test data. Weigh parts. Use control plans. PPAP and PPC testing. Assist in maintaining HellermannTyton's Quality and Environmental certification by supporting: Corporate policies, procedures, work instructions and required documentation. Other Functions Become a "Go To" person for production personnel regarding Quality of Product Determine "Clean Point" when a non conformance is found Support LEAN Work Environment Other duties may be assigned. Key Competencies Ability to read Blue Prints Ability to use basic hand meausring tools Have basic math skills Ability to comminicate effectively both written and orally Basic computer skills a plus Injection Molding knowledge a plus Qualifications (skills, knowledge, experience) High school diploma or equivalent required. 1 year prior lab experience preferred Good math and communication skills. Computer skills - Windows, Excel Good vision. Mic and caliper knowledge preferred. Problem solving skills. Blue print reading skills preferred. Excellent verbal & written communication skills. Bend over in order to lift 50lbs. Ability to lift/push/pull up to 50 lbs. All employees entering the Manufacturing area and other identified locations must wear the designated Personal Protective Equipment (PPE) for their position. Wearing your Personal Protective Equipment (PPE) is a condition of employment. Ability to work daily and weekend overtime to meet the needs of the department and customer. #LI-Onsite #LI-KN1 Rev. 5.18.2023 By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position. HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

:** Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. **Job Posting External** **Primary Responsibilities** + Responsible for the daily tactical quality support of manufacturing components/processes and assembly processes/outputs. + Implement containment actions for non-conformances ensuring impact to production is minimal. + Participate in quality assurance audits. + Maintain/update quality control documents. + Utilize basic inspection equipment and blueprint reading. + Assist in the evaluation and disposition of non-conforming product. + Provide metrics and input for the Quality function to other departments. + Review and verify corrective actions for effectiveness to prevent reoccurrences **Qualifications** + A two-year college degree and/or ASQ Certification as a Quality Technician preferred. + Three to five years' experience in quality and/or manufacturing related fields desirable. + Must have good problem solving skills. + Working knowledge of advanced mathematics, including statistical techniques, SPC, Capability Analysis and Gage R+R is required. + Must be able to apply quality tools for continuous improvement (FMEA). + Must know basic inspection and testing concepts, how to read blueprints and GD+T information. Must possess good communication skills - both verbal and written. + Must possess the ability to work effectively and maintain a professional composure with other employees. + Requires understanding of basic PC computer application skills, including database, spreadsheets and word-processing. **Work Authorization:** Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. **Compensation and Benefits:** Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. EOE Veterans/Disabilities

: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. Job Posting External Primary Responsibilities * Responsible for the daily tactical quality support of manufacturing components/processes and assembly processes/outputs. * Implement containment actions for non-conformances ensuring impact to production is minimal. * Participate in quality assurance audits. * Maintain/update quality control documents. * Utilize basic inspection equipment and blueprint reading. * Assist in the evaluation and disposition of non-conforming product. * Provide metrics and input for the Quality function to other departments. * Review and verify corrective actions for effectiveness to prevent reoccurrences Qualifications * A two-year college degree and/or ASQ Certification as a Quality Technician preferred. * Three to five years' experience in quality and/or manufacturing related fields desirable. * Must have good problem solving skills. * Working knowledge of advanced mathematics, including statistical techniques, SPC, Capability Analysis and Gage R+R is required. * Must be able to apply quality tools for continuous improvement (FMEA). * Must know basic inspection and testing concepts, how to read blueprints and GD+T information. Must possess good communication skills - both verbal and written. * Must possess the ability to work effectively and maintain a professional composure with other employees. * Requires understanding of basic PC computer application skills, including database, spreadsheets and word-processing. Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. EOE Veterans/Disabilities Nearest Major Market: Indianapolis Job Segment: Maintenance, Database, Warehouse, Quality Assurance, Plant, Manufacturing, Technology

: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. Job Posting External Primary Responsibilities Responsible for the daily tactical quality support of manufacturing components/processes and assembly processes/outputs. Implement containment actions for non-conformances ensuring impact to production is minimal. Participate in quality assurance audits. Maintain/update quality control documents. Utilize basic inspection equipment and blueprint reading. Assist in the evaluation and disposition of non-conforming product. Provide metrics and input for the Quality function to other departments. Review and verify corrective actions for effectiveness to prevent reoccurrences Qualifications A two-year college degree and/or ASQ Certification as a Quality Technician preferred. Three to five years' experience in quality and/or manufacturing related fields desirable. Must have good problem solving skills. Working knowledge of advanced mathematics, including statistical techniques, SPC, Capability Analysis and Gage R+R is required. Must be able to apply quality tools for continuous improvement (FMEA). Must know basic inspection and testing concepts, how to read blueprints and GD+T information. Must possess good communication skills - both verbal and written. Must possess the ability to work effectively and maintain a professional composure with other employees. Requires understanding of basic PC computer application skills, including database, spreadsheets and word-processing. Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. EOE Veterans/Disabilities

Quality Technician Reports to: Assistant Quality Manager Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers' standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9001, ISO:14001 and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: In this position, the Quality Technician performs dimensional and/or functional inspection on purchased materials and manufactured parts. Uses technical expertise and inspection instrumentation to verify conformance of materials/parts to prints, process sheets and specifications. Minimum Qualifications: Know & understand the use of all inspection equipment including (but not limited to): Micrometers Calipers Dial Indicators Height Gages Optical Comparators Gage Pins and Gage Blocks Sine Blocks and Setups Surface Finish Testers CMM Thread Gages Understand basic Geometric Tolerance. Able to read and understand drawings Knowledgeable about current quality system standards such as ISO-9002 and/or TS16949 Ability to multitask in response to numerous demands; time management skills Computer literate: Excel, Word, etc. Attention to detail Desired Skills: Experience with inspection and measuring equipment calibration Previous auditing experience and skills Experience writing procedures and work instructions PPAP documentation experience Specific Duties: Perform first piece, in-process and final inspections Provide inspection results to Quality Engineer for inclusion in PPAP's Understand cosmetic part requirements based on specific customer standards Provide inspection support based on needs of Manufacturing and Engineering Managers Maintain up to date documentation by completing all necessary paperwork i.e. in-process inspection records, signing off on travelers, 1st piece inspection tags, etc. Perform basic training as required for operator or team leader for First-Piece and In-Process Inspection Provide continuous feedback to the Assistant Quality Manager regarding quality, engineering and manufacturing-related issues Suggest process improvements Perform part and process related internal audits Maintain QA Lab and equipment in clean, orderly condition Special projects and assignments Physical Requirements: Regularly lifts and/or moves 25-50 pounds Requires frequent reaching, handling and grasping Requires occasional climbing of stairs, balancing, bending, crouching, fine manipulation and feeling This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Quality Technician Reports to:Assistant Quality Manager Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers' standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9001, ISO:14001 and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: In this position, the Quality Technician performs dimensional and/or functional inspection on purchased materials and manufactured parts. Uses technical expertise and inspection instrumentation to verify conformance of materials/parts to prints, process sheets and specifications. Minimum Qualifications: Know & understand the use of all inspection equipment including (but not limited to): Micrometers Calipers Dial Indicators Height Gages Optical Comparators Gage Pins and Gage Blocks Sine Blocks and Setups Surface Finish Testers CMM Thread Gages Understand basic Geometric Tolerance. Able to read and understand drawings Knowledgeable about current quality system standards such as ISO-9002 and/or TS16949 Ability to multitask in response to numerous demands; time management skills Computer literate: Excel, Word, etc. Attention to detail Desired Skills: Experience with inspection and measuring equipment calibration Previous auditing experience and skills Experience writing procedures and work instructions PPAP documentation experience Specific Duties: Perform first piece, in-process and final inspections Provide inspection results to Quality Engineer for inclusion in PPAP's Understand cosmetic part requirements based on specific customer standards Provide inspection support based on needs of Manufacturing and Engineering Managers Maintain up to date documentation by completing all necessary paperwork i.e. in-process inspection records, signing off on travelers, 1st piece inspection tags, etc. Perform basic training as required for operator or team leader for First-Piece and In-Process Inspection Provide continuous feedback to the Assistant Quality Manager regarding quality, engineering and manufacturing-related issues Suggest process improvements Perform part and process related internal audits Maintain QA Lab and equipment in clean, orderly condition Special projects and assignments Physical Requirements: Regularly lifts and/or moves 25-50 pounds Requires frequent reaching, handling and grasping Requires occasional climbing of stairs, balancing, bending, crouching, fine manipulation and feeling This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Requirements QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Position requires a high degree of self-motivation and good organizational skills. Two to four months of training are required to properly prepare a person for this position. EDUCATION and/or EXPERIENCE: Associate degree (A. A.) or equivalent from two-year college or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. REASONING ABILITY Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to walk, sit, and talk or hear. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: ***************************************.

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Chili, NY HOURS: DAYS 7am - 7pm on a 2-2-3 schedule SUMMARY: Tests and inspects products at various stages of production process and compiles and evaluates statistical data to determine and maintain quality and reliability of products by performing the following duties. This position can present the motivated employee with several career options as the company grows and he/she gains expertise and knowledge. ESSENTIAL DUTIES AND RESPONSIBILITIES: Performs visual inspections and physical tests utilizing equipment in Lab. Products are tested for a variety of qualities such as dimensions, performance or chemical characteristics. Records and evaluates test data and writes reports. Recommends modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability. Enters data into computer for analysis. Prepares certificates of analysis on finished product for our customers. Able to use and read measuring instruments as well as operating instructions and procedure manuals. Trial reports, inspection and tracking. Assist QA and Technical departments in their duties. Must take responsibility for work assigned. Effective communication skills, both verbal and written. Support and follow all plant Safety Rules, GMPs, and other procedural training requirements. Requirements QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Position requires a high degree of self-motivation and good organizational skills. Two to four months of training are required to properly prepare a person for this position. EDUCATION and/or EXPERIENCE: Associate degree (A. A.) or equivalent from two-year college or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. REASONING ABILITY Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to walk, sit, and talk or hear. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: ***************************************.

As a Receiving Technician, you will be responsible for validating the quality of purchased raw materials and incoming products by conducting receiving inspections. Quality plays a critical role in elevating the performance of the total company by identifying opportunities for improvement in both processes and people and then working closely with leaders and teammates across the organization to take action to make things better each day (systems, processes, people). * Document all inspection results consistent with company procedures and customer requirements and issue non-conformances and/or quality notifications for discrepant conditions as required. * Maintain accurate records of incoming inspections in accordance with quality control procedures. * Collaborate with engineering, purchasing, and quality departments to address and resolve quality issues with incoming goods. * Notify relevant teams about non-conforming materials and incoming product. * Follow the tag system * Fill out, stamp, and sign Quality Inspections * Log and file quality records * Inspect and verify the quality and quantity of received materials, parts, or products against purchase orders and specifications. * Conduct dimensional and visual inspections using tools like calipers, micrometers, gauges, and other measuring equipment. * Support all manufacturing concerns in a timely manner Preferred Experience: * Familiarity with office and warehouse environments * Basic knowledge of Aerospace specifications * Material handling experience, using a Forklift and Overhead Crane * Must possess the ability to use and operate the following equipment and tools: Coil Cart, Micrometer, Calipers, Scale, Bander, Bander Cutters, Side Loader * 1-2 year quality-related experience and/or training is preferred BENEFITS: * Competitive Premiums on Health and Dental Insurances * Vision Insurance for team members * Boot and prescription safety glasses allowance * PTO after 30-days * Paid Holidays * Quarterly Bonus Program * 401k Match

Available! RESPONSIBILITY: Inspection Of Plastic Parts As Specified On Production Document. Verify Correct Part To Print Revision And Correct Material Used. Label Creation. Audit Paperwork For Quality Criteria From Production Floor When Job Is Complete. Receiving Inspection Do Layouts As Required. Filing And Other Duties As Assigned. Understand Company Quality Policy And General Safety Rules For All Employees Education / Experience Quality Technician/Inspector experience (Required) Thorough Knowledge Of Blue Print Reading Basic Knowledge Of Process Control And Capability Good Mathematical Skills Pay:$18.89 Shift: 3rd Sunday-Thursday Hours: 10:30pm-7am Why work for Advance Services, Inc. Advance Services is for and about people; we are your employment specialists. Enjoy our easy application process. Fun Safety and attendance incentives. You NEVER pay a fee! Weekly pay. Health Benefits to keep you and your family healthy. Great Referral Incentives. Advance Services partners with the top companies in the area! Apply for this job by clicking the apply button. You will be directed to our website. Please select the Maryville branch or call our office at ************* Stop in and see our experienced friendly staff at 15570 W Van Buren St, Goodyear, AZ 85338 Advance Services is an equal opportunity employer. #450

As a Quality Technician at NMG Aerospace you will be responsible to perform inspection / testing and statistical analysis on aerospace products to support continuous improvement. Shift is 6:00am - 2:30 pm Monday - Friday Perform inspection / testing and statistical analysis on aerospace products to support continuous improvement. Essential Job Functions: * Perform inspections or tests as directed using inspection / measuring equipment and recording results. * Perform statistical analysis as required/requested. * Perform capability studies. * Manage the Statistical Process Control (SPC) program. * Perform Failure Mode and Effects Analysis (FMEA) and develop Control plans. * Perform Gauge Repeatability and Reproducibility (R&R) studies. * Perform First Article Inspections and complete AS9102. * Prepare Production Part Approval Process (PPAP) packages as instructed. * Perform corrective actions. * Prepare quality documentation and reports by collecting, analyzing, and summarizing information, and trends. * Be able to set up and operate CMM using established programs. * Be able to set up and operate Surfcom contour tracer for detailed dimensions. * Work closely with Quality Engineer for daily needs. Additional Duties: * Provide support for Lean manufacturing and continuous improvement initiatives, companywide. * Other duties, reporting, special assignments, or projects as needed and assigned. * Must remain current with, and complete all required training as assigned. * Must adhere to Company Corporate EHS Policy and department, occupation, and task specific safety protocols, including but not limited to Personal Protective Equipment (PPE) requirements. Qualifications: * 3 years of Inspection and/or Quality Assurance experience in Aerospace, Automotive or other Technical industries. * Demonstrated competency with metrology equipment. * Competent in reading/interpreting engineering drawings (GD&T). * Advanced Computer Skills: Microsoft (Excel, Word, Outlook, and Power-point), Statistical software (Minitab / SPCpack / Stat-Graphics), digital imaging, Adobe Acrobat. * Must submit to and satisfactorily pass any pre-employment screening required for employment with the Company. * Must take medical exams required by law, in conjunction with occupation specific activities, the physical work environment, and ongoing industrial hygiene sampling results. * Depending on assignment, may be required to use stairs, remain upright and/or seated for prolonged timeframes, intermittently reposition the body per various tasks performed, and use various tools and work-related supplies. * May be required to perform manual lifting activities, not to exceed a 40lb lift performed by one individual. Education: * High School Diploma or equivalent In addition to competitive wages, NMG is proud to offer a retirement saving plan with company matching opportunity, excellent health and wellness benefits including a $350 annual wellness allowance for assistance with personal health and fitness goals, can earn up to 4 weeks paid time off, on the job training, education assistance and a variety of other supportive programs to meet our team's member's needs. Come join our NMG family and be part of a team of individuals who enjoy working and learning together as a team. Apply Today!

Horton, Inc. has an opening for a Quality Technician to work in our Westminster, SC location. This is a 3rd shift position and standard work hours are Sunday-Wednesday 9:30 pm - 7:30 am. Occasional overtime may be required. The starting pay is $20.20 and depends on experience. Position Information: With general guidance from Quality Manager, employee uses knowledge of production process and basic mathematical capacities to continuously improve technical aspects of quality assurance. Employee uses statistical techniques, standard measures and methods, training materials, and gauging to meet customer requirements in quality and delivery at the most favorable cost. Company Information: As a global leader in thermal control for power systems, Horton offers a variety of technologies for transportation and industrial applications to operate at the optimal temperature - even in the most demanding conditions. For over 70 years, the organization has been an integral partner to companies worldwide providing innovative and reliable engine cooling solutions for heavy-duty vehicles and equipment. For more information on Horton, Inc. please visit our web site at ***************** Responsibilities Quality Technician Responsibilities: Conducts process inspections as directed by QA manager Identifies and implements improvements for potential PPM opportunities Assists with Receiving Inspection Assists with maintaining and updating gages Conducts internal quality audits Assists with Production Part Approval Process (PPAP) Assists with root cause analysis of non-conforming product Work with suppliers and customers to support manufacturing processes and improvements Participate in 6S activities and ensure the Quality department maintains a safe and neat work environment Other special duties and responsibilities as assigned Qualifications Quality Technician Qualifications: The position requires skills and knowledge consistent with that of two years of college or trade school or equivalent. Note: Equivalent education equals 2 years of closely related experience for 1 year of education in the quality field. Good communication skills. Proficiency with Microsoft office Suite. Previous experience in manufacturing, specifically Quality is a plus. Must be authorized to work in the United States. No Visa sponsorship provided now or in the future for this position. Additional Information: We offer a competitive benefits package including PTO, Company Paid Holidays, 401K, Medical, Dental, Vision, HSA, FSA, Life, AD&D, STD, LTD, Education Assistance, and a dynamic work environment. To apply, qualified candidates should log onto ********************************* Horton Holding, Inc. is an Equal Opportunity employer. Veterans/Disabled PM17

General Job Description: In this position, the Quality Technician performs dimensional and/or functional inspection on purchased materials and manufactured parts. Uses technical expertise and inspection instrumentation to verify conformance of materials/parts to prints, process sheets and specifications. Minimum Qualifications: Know & understand the use of all inspection equipment including (but not limited to): Micrometers Calipers Dial Indicators Height Gages Optical Comparators Gage Pins and Gage Blocks Sine Blocks and Setups Surface Finish Testers CMM Thread Gages Understand basic Geometric Tolerance. Able to read and understand drawings Knowledgeable about current quality system standards such as ISO-9002 and/or TS16949 Ability to multitask in response to numerous demands; time management skills Computer literate: Excel, Word, etc. Attention to detail Desired Skills: Experience with inspection and measuring equipment calibration Previous auditing experience and skills Experience writing procedures and work instructions PPAP documentation experience

General Job Description: In this position, the Quality Technician performs dimensional and/or functional inspection on purchased materials and manufactured parts. Uses technical expertise and inspection instrumentation to verify conformance of materials/parts to prints, process sheets and specifications. Minimum Qualifications: Know & understand the use of all inspection equipment including (but not limited to): Micrometers Calipers Dial Indicators Height Gages Optical Comparators Gage Pins and Gage Blocks Sine Blocks and Setups Surface Finish Testers CMM Thread Gages Understand basic Geometric Tolerance. Able to read and understand drawings Knowledgeable about current quality system standards such as ISO-9002 and/or TS16949 Ability to multitask in response to numerous demands; time management skills Computer literate: Excel, Word, etc. Attention to detail Desired Skills: Experience with inspection and measuring equipment calibration Previous auditing experience and skills Experience writing procedures and work instructions PPAP documentation experience

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Cedar City, UT SHIFT: 12 hr Nights, 7pm-7am SUMMARY: Tests and inspects products at various stages of production process and compiles and evaluates statistical data to determine and maintain quality and reliability of products by performing the following duties. This position can present the motivated employee with several career options as the company grows and he/she gains expertise and knowledge. ESSENTIAL DUTIES AND RESPONSIBILITIES: Performs visual inspections and physical tests utilizing equipment in Lab. Products are tested for a variety of qualities such as dimensions, performance or chemical characteristics. Records and evaluates test data and writes reports. Recommends modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability. Enters data into computer for analysis. Prepares certificates of analysis on finished product for our customers. Able to use and read measuring instruments as well as operating instructions and procedure manuals. Trial reports, inspection and tracking. Assist QA and Technical departments in their duties. Must take responsibility for work assigned. Effective communication skills, both verbal and written. Support and follow all plant Safety Rules, GMPs, and other procedural training requirements. Requirements QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Position requires a high degree of self-motivation and good organizational skills. Two to four months of training are required to properly prepare a person for this position. EDUCATION and/or EXPERIENCE: Associate degree (A. A.) or equivalent from two-year college or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. REASONING ABILITY Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to walk, sit, and talk or hear. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: ***************************************.

Objective The Quality Technician is responsible for supporting the quality assurance processes within the organization. This role involves maintaining quality systems, facilitating continuous improvement initiatives, researching customer problem-solving related to defective parts, and ensuring compliance with relevant standards and regulations. The Quality Technician will collaborate with various departments to enhance product quality and drive process improvements. Job Duties and Responsibilities Documentation and Record Keeping: Maintain and update quality documentation, including process flowcharts, work instructions, and standard operating procedures (SOPs). Ensure that all quality records are accurately documented and stored according to company policies and regulatory requirements. Process Improvement: Assist in identifying areas for improvement in production processes and quality systems. Support the development and implementation of corrective and preventive actions to address quality issues and prevent recurrence. Data Analysis and Reporting: Collect and analyze quality data to identify trends and areas for improvement. Prepare and present reports on quality metrics, performance, and project outcomes to management. Blueprint Reading and interpretation Customer Problem-Solving: Research customer complaints and issues related to defective parts. Analyze returned defective parts and work with engineering and production teams to identify root causes. Develop and implement solutions to resolve customer problems effectively and prevent recurrence. Ensure that all corrective actions related to customer complaints are documented and tracked. Compliance and Regulation: Ensure adherence to regulatory requirements and industry standards related to quality. Required Knowledge, Skills, and Abilities Adaptability to technological and organization changes Ability to build relationships with other employees & management Root cause analysis of defects in products and processes Develop and execute controlled tests Ability to communicate professionally, both verbal and written Strong Analytical and Problem-solving skills Must be able to read and comprehend written and verbal work instructions Capability to work well under minimal supervision Strong attention to detail Must be able to lift 40 pounds infrequently and 25 pounds often. Education and Training Associate's degree in Quality Assurance, Manufacturing/Production, Engineering, or related field; or equivalent work experience. Previous experience in a quality-related role is preferred.

Job Title: Quality Inspector, Machine Shop Company: Custom Control Sensors, LLC Employee Type: Full Time, Non-Exempt Industry: Manufacturing Hours: 2pm to 10:30pm Education & Experience: High School Diploma or Equivalent GED 4+ years of hands-on inspection experience with precision machined parts in an aerospace, medical, or automotive manufacturing environment Company Overview Custom Control Sensors, LLC (CCS) is a global leader of pressure, temperature, and liquid flow switches and sensors for the Aerospace, Defense, and Industrial markets. Since 1957, we have provided high-reliability electro-mechanical devices that utilize the "DUAL-SNAP" action disc spring principle we pioneered. We are AS 9100 and ISO 9001 certified. Industrial Product certifications include UL, CSA, ATEX, GOST, CCC and IECEx. We are growth-orientated, and dedicated to the continued cultivation of a vibrant, energetic work environment. Fostering interaction and collaboration between all associates, connection with our customers, and opportunity for creativity is our primary focus. Benefits MedicalDental 401k with MatchEmployer funded Life Insurance and Long-term DisabilityVoluntary Short-term DisabilitySick and Vacation Leave9 Paid Holidays2nd Shift Differential Job Description The Quality Inspector is responsible for ensuring that all machined parts and assemblies produced by the company meet the company's quality standards. This includes inspecting the parts for conformance to engineering drawings and specifications, as well as for any defects or non-conformances. The Quality Inspector will also inspect incoming raw materials, products, and services for conformance to purchase orders (POs), engineering drawings, and specifications. The Quality Inspector will use a variety of inspection tools and equipment to perform their duties, such as calipers, micrometers, optical comparators, and CMMs. They will also use their knowledge of technical drawings and GD&T to inspect the parts and assemblies. The Quality Inspector is a critical member of the quality team and plays a vital role in ensuring that the company's products meet the highest quality standards. They must be highly skilled and knowledgeable, and they must be able to work independently and as part of a team. Key Responsibilities 80% of work: Mechanical Inspection of parts produced by Machine shop Conducting Acceptable Quality Level (AQL) inspection to exacting tolerances, castings, forgings, machined parts, sheet metal parts and assemblies furnished by vendors or fabricated in-house.Inspects machined parts for proper material, processes, completion of operations, workmanship and conformance to engineering approved sketches, drawings and specifications.Read and understand engineering drawings and specifications and perform mathematical computations.Conducting visual inspections and utilize standard inspection devices such as calipers, micrometers, indicators, height gages, dial bore gages, optical comparator and thread gages.Works with common geometric features used in blueprints and provide application knowledge of how to inspect for each (roundness, concentricity, flatness, runout, perpendicularity and parallelism) Utilize advanced inspections equipment, including Keyence Optical ComparatorCreate new programs for new parts and assemblies using the Keyence Optical comparator Record data on production documents and ensure all documentation is accurate and complete Performs first article inspections at the machine or assembly and provides and accept or reject decision.Inspects functional gages, fixtures, molds, dies, tooling, etc., for conformance to drawings.Prepare and maintain required inspection reports and records.20% of work: Receiving Inspection on raw material, Products and services Inspect incoming raw materials, products, electronics, and services for conformance to purchase orders (POs), engineering drawings, and specifications.Identify and report any non-conformances to the appropriate personnel.Work with Quality Engineers and Managers to resolve any issues that may arise.Other DutiesAssist in the activities of other inspectors as directed.Perform related work requiring equal or lesser skill.Interact appropriately with others in order to maintain a positive and productive work environment.Work with minimal supervision to the quality industry and department standards, while adhering to best safety practices.Accomplish inspection-related tasks as directed by the Planner and Supervisors.Documenting non-conformances in Discrepancy Reports (DRs).Maintaining high quality standards with minimal discrepant work.Other duties as assigned by Supervisor and/or Quality Manager. Skills and Requirements Due to need to maintain ITAR compliance, applicants must be U.S. citizen or legal permanent resident.Familiarity with AS9100 and AS9102 aerospace standards Proficiency in using precision measuring equipment (e.g. Calipers, Micrometers, Optical Comparators, etc.) Must have a strong understanding of computer operation, trigonometry, and AQL Sampling methodologies Ability to read and write in EnglishAbility to maintain quality of work as per company specifications Ability to use Windows and MS-Office (Outlook, Excel, etc.) Possess advanced knowledge of technical drawings (ANSI/ASME Y14.5 GD&T) CMM experience, Programming with PCDMIS is a plus Ability to program Keyence optical comparator is a plus Required to work to a dimensional tolerance as small as .0002"Strong communication skills in English (written and verbal) Time management skills Adaptability and flexibility to changing situations and new tasks Availability to overtime as needed to support OperationsIndependent problem-solving skills with minimal instruction Professional demeanor and teamwork orientation. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is continuously require sitting, using hands and fingers to flex and extend fingers with opposition of thumb-palmar grasp, talk or hears. The employee is frequently required to stand, walk, bend, stoop, reach, turn, twist, push, and pull and to move within all areas of the facilities and parking lots. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision peripheral vision, color vision, depth perception and the ability to adjust and focus. EEO M/F/D/V Custom Control Sensors, LLC. is an Equal Opportunity employer. All qualified applicants for employment shall receive fair and equal treatment regardless of their race (including hair texture and protective hairstyles, such as braids, locks, and twists), color, religion, creed, sex/gender, marital or registered domestic partnership status, age, national origin or ancestry, citizenship, pregnancy, childbirth, breastfeeding or related medical conditions, mental or physical disability (including HIV and AIDS), medical condition including genetic information or characteristics (including those of family members), sexual orientation, veteran or military status, gender identity, gender expression, transgender status or any other basis protected by federal, state or local law, ordinance or regulation. The policy not to discriminate includes, but is not limited to, advertising for positions, recruiting, hiring, placement, promotion, transfer, rates of pay, discipline and termination. No recruiters or recruitment agencies. Monday through Friday, 2pm to 10:30pm Compensation details: 19.12-25.4 Yearly Salary PI8ee9113d9e03-31181-37063221