Structural analysis engineer work from home jobs - 228 jobs

GAI Consultants, Inc. is seeking an Geotechnical Engineer 1 to work with the Power Generation Business Sector on Power Generation and Infrastructure projects and when needed other regional client projects. GAI Consultants, Inc. offers its employees, upon approval by supervisors, the ability to work remotely or in a hybrid setting. The successful candidate will enjoy working in a team-oriented environment that will utilize their college education and past work experience to develop professionally into a well-rounded professional with the ability to grow in today's environment. The candidate will be based out of one of GAI's Pittsburgh area offices, Canton, OH office, Charleston, WV office Richmond, VA office or future office in Collegeville/King of Prussia, PA. The successful candidate will perform geotechnical design tasks and field work under the supervision of a licensed professional engineer and/or professional geologist. Essential Duties: Perform geotechnical engineering assignments involving investigations and designs for a variety of facilities including, but not limited to: foundations for transmission lines, buildings, bridges, retaining walls and other structures; designs for natural gas pipelines and compressor stations; and design of residual waste landfills and impoundments. Prepare geotechnical engineering designs involving: Rock/soil slope stability Cut slope and fill embankment design Landslide stabilization (reinforcement with rock anchors/ soil nails, GRS slopes) Geotechnical field instrumentation Soil reinforcement and ground improvement techniques (CMCs, compaction grouting, stone columns) Sheet pile/retaining walls (gravity walls, soldier pile and lagging walls, MSE walls, T-walls) Shallow and deep foundations (spread footings, driven piles, augered cast-in-place piles, helical piles, micropiles, drilled shafts). Develop subsurface investigations, monitoring programs, and coordinate geologic site characterization for a variety of facilities mentioned above Installations of geotechnical field instrumentation Selection of samples for laboratory testing. Prepare proposals, budgets, schedules, calculations, specifications and reports. Geotechnical Investigation and Construction Support Services including, but not limited to: Test boring monitoring and logging Site reconnaissance Foundation and retaining structure construction monitoring and inspection. The individual will be responsible for interpreting specifications and construction drawings, evaluating site conditions based on construction excavations, monitoring and reporting on construction activities, and performing field testing of soils. Perform site inspections at various power facilities and associated sites. Site inspections may be daily, weekly, monthly, or annual. Prepare boring logs and geologic cross sections. Travel can be expected in the form of fieldwork, which can be daily local travel or weekly out-of-town travel primarily in the mid-west and Mid-Atlantic regions of the United States. Be able to complete with assistance or willing to learn basic civil site design tasks including: site grading plans, erosion and sediment control plans, stormwater management plans, drainage plans, utility design and relocation, permit applications, construction drawings, specifications, and quality control plans, construction cost estimates, Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Candidate can be expected to traverse steep terrain and carry up to 50 lbs. General Characteristics Applies broad knowledge of principles and practices in a specific practice area. Independently evaluates, selects, and adapts standard techniques, procedures, and criteria. Acquires general knowledge of principles and practices of related fields, and ability to function on multidisciplinary teams. Applies teamwork skills to effectively plan, execute, and manage scopes, schedules, and budgets to meet project stakeholder needs. Minimum Years of Experience 4+ Years of Experience Education B.S. or M.S. Engineering Certification/Licensure Professional Engineer (P.E.) License Technical Responsibilities Occasionally designs portions of a project, system, component, or process. Prepares plans, specifications, and other project documents. Designs and conducts analyses and interprets test data. Project and Task Management Occasionally assigns tasks to other technical and non-technical staff. Occasionally plans and coordinates detailed aspects of the engineering work. Prepares scopes, budgets, and schedules for assignments. Assists with proposals to provide professional services or obtain funding for engineering projects or projects. Management Responsibility Receives general direction on key objectives. Receives guidance on unconventional/complex problems, direction on modified techniques, and new approaches on assignments with conflicting criteria. Mentors junior staff by providing guidance, explaining professional responsibilities, and reviewing work products. Attends project meetings and presents specific aspects of engineering assignments. Communication Skills Communicates effectively to both technical and nontechnical audiences. Why GAI? At GAI, exceptional people have an exceptional place to work, grow, lead, and achieve. Explore an array of opportunities in locations across the U.S. and join accomplished colleagues in tackling challenging projects for a range of markets. Enjoy comprehensive benefits and feel good about being part of a collaborative team that's committed to supporting the communities we serve. Join GAI and distinguish yourself in a company poised for unlimited growth. Benefits To Working at GAI Include: Competitive salary -GAI is committed to paying market-based salaries Comprehensive benefits package including medical, vision, dental, company paid Long Term Disability, and Short-Term Disability (benefits start within 30 days of hire) New paid Maternity/Paternity/Adoption program Generous Paid Time Off and 7 paid holidays 401k company match Tuition Reimbursement Qualifications EducationBachelors of Engineering (required) Experience4 years: Relevant Experience (required) Licenses & CertificationsProfessional Engineer (required) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Title: Thermal Analysis Engineer Type: Contract (yearlong) typically extends on a yearly basis Compensation: $52 - $85 hourly Contractor Work Model: Fully Remote Paid Holidays | PTO System One is seeking a highly motivated Thermal Analysis Engineer for a yearlong, fully remote contract position. Tasks + Perform thermal model development and/or model modification for reactor structures evaluating thermal profiles of various configurations and recommendations for modifications or optimization (workbench type analysis) + Perform non-record evaluations of various configurations and joints to assess specific areas of challenge or modifications + Work with our client's component design leads and analysis engineers to evaluate specific component issues, develop local models or modify existing, and provide insights and feedback to design teams for action + Perform thermal modeling of fluid-structure interfaces, including metallic structure thermal problems with structure conductive heat transfer, air convective heat transfer, radiation, and sodium-structure heat transfer modes + Perform follow-on scope for preparation and/or Design Verification of Quality Level 1 (Safety Related) calculations + Use existing models and methods defined by our client's analysis team and work inside their analysis suite + Qualification indoctrination to our client's quality program to perform preparation or verification activities Key Qualifications and Skills + Experience and expertise in ASME BPVC Section III, Division 1 and high temperature applications + Education: Bachelor's degree in mechanical engineering or other relevant equivalent program from an accredited university + Experience: 5-10 years of relevant experience. Experience level may be partially substituted for advanced degree depending on position relevance, PE desired. + Strong communication skills are desired. + The candidate will possess a high degree of trust and integrity, communicate openly and display respect, and a desire to foster teamwork. System One, and its subsidiaries including Joulé, ALTA IT Services, and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M- #LI- #DI- Ref: #161-Managed Staffing Charlotte System One, and its subsidiaries including Joulé, ALTA IT Services, CM Access, TPGS, and MOUNTAIN, LTD., are leaders in delivering workforce solutions and integrated services across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible full-time employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law.

Reactor Enclosure System (RES) Thermal Analysis Engineer Position Description: Protingent Staffing has an exciting contract Reactor Enclosure System (RES) Thermal Analysis Engineer opportunity. Job Responsibilities: Perform thermal model development and/or model modification for reactor structures evaluating thermal profiles of various configurations and recommendations for modifications or optimization (workbench type analysis) Perform non-record evaluations of various configurations and joints to assess specific areas of challenge or modifications Work with Company component design leads and analysis engineers to evaluate specific component issues, develop local models or modify existing, and provide insights and feedback to design teams for action. Perform thermal modeling of fluid-structure interfaces, including metallic structure thermal problems with structure conductive heat transfer, air convective heat transfer, radiation, and sodium-structure heat transfer modes Perform follow-on scope for preparation and/or Design Verification on Quality Level 1 (Safety Related) calculations Use existing models and methods defined by the Company Reactor analysis team and work inside the Company analysis suite Qualification indoctrination to Company quality program to perform preparation or verification activities Job Qualifications: Experience and expertise in ASME BPVC Section III, Division 1 and high temperature applications Education: Bachelor's degree in Mechanical Engineering or other relevant equivalent program from an accredited university Experience: 5-10 years of relevant experience. Experience level may be partially substituted for advanced degree depending on position relevance, PE desired. Strong communication skills desired. The service provider will possess a high degree of trust and integrity, communicate openly and display respect, and a desire to foster teamwork. Travel Required: 15% for periodic meeting with Company technical staff. Job Details: Job Type: Contract Pay Rate Range: $52-$85/hr (*Pay rates are approved based on candidate location, education and experience*) Location: 100% Remote Acceptable Export control regulations require candidates to be a U.S. Citizen, U.S. Legal Permanent Resident, or of a protected person status Benefits Package: Protingent offers competitive salaries, insurance plan options (HDHP plan or POS plan), education/certification reimbursement, pre-tax commuter benefits, Paid Time Off (PTO), and an administered 401k plan. #TerraPro About Protingent: Protingent is an Award-Winning provider of top-tier Engineering and IT talent, trusted by companies at the forefront of innovation - from Software and Aerospace to AI, Clean Tech, Medical Devices, and Connected Technologies. We're passionate about making a positive impact by connecting exceptional talent with meaningful opportunities and helping our clients build the future.

Johnson Service Group (JSG) is a nationally recognized professional staffing firm, and we are recruiting for an experienced Structural Analysis Engineer. This contract role will support a cutting-edge nuclear power organization focused on advanced small modular reactor (SMR) technology. This role will play a critical part in ensuring safe, compliant, and innovative structural designs for nuclear energy applications. This position offers the ability to work fully remote with an estimated 5-10% travel throughout the United States. W2 Hourly Compensation: (Commensurate with experience) Benefits/Paid Time Off: Not included under the terms of this contract role. Citizenship: U.S. Citizenship is required. Eligibility: Must be eligible to work under DOE 10 CFR Part 810. Responsibilities: Serves as subject matter expert in civil structural design and analysis. Works on highly complex tasks in multiple and diverse areas and proposes innovative design solutions requiring a significant amount of independent judgment. Works to bring advances in technical capabilities in house as deemed beneficial and strategic. Uses structural engineering tools and implements appropriate standards to design Nuclear Safety-Related and Non-Safety-Related structures including post-processing analytical results and designing structures for various material types (concrete, steel, etc.). Interfaces with licensing in support of domestic and international regulatory efforts. Interacts with other disciplines and structural engineering consultants in an effort to allow effective coordination of design activities and resolution of technical problems. Provides guidance and mentoring to other staff members in support of the team's technical activities. Develops and reviews requirements documents, methodology documents, design reports, and studies. Routinely interacts with contractors and/or regulatory bodies. Capable of resolving technical issues, coordinating discussion with interdisciplinary stakeholders, and working with the management team to identify project impacts. Education / Experience: Bachelor's Degree in Civil/Structural Engineering is required. (Advanced degree is preferred.) A registered professional engineer license (P.E.) is strongly preferred. 12+ years of experience in the design and analysis of concrete and steel structures is required. Demonstrated proficiency in the use of ANSYS design and finite element analysis software is required. Demonstrated proficiency working with the following codes: ASCE 43, ASCE 4, ACI 349 & 318, ASCE 7, IBC, and AISC N690. Familiarity with the Steel Construction and Seismic Design Manuals. Must have in-depth understanding of engineering concepts, principles, and theories. Strong technical writing skills as well as good communication, computer, presentation, and interpersonal skills. Exceptional organization and time management skills and ability to manage complex projects with multiple work phases is required. Our client is advancing next-generation nuclear technology, offering engineers the opportunity to contribute to safety-critical infrastructure while maintaining the flexibility of a fully remote role and long-term contract stability. JSG offers medical, dental, vision, life insurance options, short-term disability, 401(k), weekly pay, and more. Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law. #D305 #LI-JR1

WHO ARE WE Sonaca North America is driven by a passion for innovation and a commitment to excellence. As a leading provider of aerospace and defense solutions, we are dedicated to making air and space travel safe and sustainable. We have 13 locations across North America and our engineering expertise and operational excellence set us apart from the competition. Since the beginning in 1948, we have a proven track record of delivering high-quality products and services that are reliable, safe, and efficient. Our team of experts is dedicated to staying ahead of the curve in the aerospace and defense industry, utilizing the latest technologies and processes to ensure that we deliver the best possible solutions to our customers. POSITION SUMMARY We are currently seeking a Stress Engineer III. Under the direction of the Engineering manager, supervisor or director, this position will provide stress analysis input to the Engineering Integrated Product Team (IPT) to ensure successful product development from conceptual layout stage through release of detail engineering and documentation. This position will coordinate with IPT to identify all design requirements and optimize load paths. The Stress Engineer III will develop and validate efficient stress analysis methodology using classical stress analysis methods and/or computer aided engineering solutions such as finite element models (FEM). Will often direct the work of other Stress Engineers and act as the Project lead. ESSENTIAL JOB RESPONSIBILITIES The Stress Engineer III will rely on extensive experience and judgment to plan and accomplish goals while performing a variety of complex tasks in the following areas: * Coordinate with customer to identify all design and stress requirements for a particular product * Evaluate requirements and structural complexity to determine the most effective stress analysis method. * Work with design during conceptual phase to optimize load paths. * Work with IPT throughout joint definition phase to optimize structure for weight, cost, and producbility while maintaining required strength and durability. Continue to optimize structure during release of detailed engineering. * Develop and validate internal loads using classical and finite element (FEM) approaches. * Provide detailed stress analysis of metal and composite structures by classical hand stress calculations and FEM analysis utilizing software such as NASTRAN/PATRAN. * Analyze ability of product to withstand stress imposed by conditions such as temperature, loads, motion, and vibration. * Provide fatigue and damage tolerance analysis as required. * Validate design for optimal material selection and corrosion prevention. * Support production by resolving manufacturing issues including disposition of rejection tags. * Provide fleet support by developing and substantiating repairs. * Direct preparation of final stress analysis reports to substantiate that the design satisfies all relevant EASA or FAA regulations and customer requirements. * Assist in preparation of test plans, provide technical support during testing, analyze test results and document conclusions. * Provide technical leadership and on-the-job training to team of assigned engineers to enhance skill development of junior engineers. * Coordinate all aspects of team activity to maximize productivity and meet schedule and cost targets. * Conduct frequent coordination with customer for all stress related issues, typically attending weekly customer meetings. Track status of action items and deliverables to and from customer. Prepare and present stress data for design reviews and other technical meetings with customer. * Directs work of others and acts as lead. * Performs other duties as required, such as bid and proposal support. EDUCATION AND EXPERIENCES * Requires a bachelor's degree in engineering and a minimum of 10+ years of experience in the Aerospace Industry or in a related field. * Advanced working knowledge of NASTRAN/ANSYS and MS Office products. * Basic working knowledge of CATIA V5. WHY CHOOSE SONACA NORTH AMERICA? We take care of our people. * 401(k) retirement savings plan with a percentage company-match contribution * Competitive wages * Paid holidays * Paid time off * Medical, dental, vision, life, and accidental insurance * Short-term disability * Long-term disability * Employee assistance plan - for access to counseling, consulting, and other community resources * Wellness program * Tuition assistance * Subject to eligibility, terms, and conditions Annual Salary Range = $116,680 - $192,360 This base pay range is specific to residents of California, Colorado, Connecticut, New Jersey, New York, Nevada, Ohio, Rhode Island, and Washington, and any other state that may require such disclosure. Compensation in other geographies may vary. This is only a summary of the typical functions of the job, not an exhaustive or comprehensive list of all possible job responsibilities, tasks, and duties. The responsibilities, tasks, and duties may differ from those outlined in the job description and other duties, as assigned, may be required. This document does not create an employment contract. Employees of the Company are employed on an "at will" basis and may be terminated at any time. Sonaca North America is an equal employment opportunity employer. Consistent with applicable law, Sonaca North America provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company's online application system. If an applicant is unable to fully access the online application system, Sonaca North America will provide a reasonable accommodation. Applicants with disabilities may contact us at ************ for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for Sonaca North America's Human Resources Department. Sonaca North America will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials. Sonaca North America is an E-Verify Employer. Sonaca North America is an Equal Employment Opportunity/Disability/Veterans Employer NOTICE ON FRAUDULENT JOB OFFERS It has been brought to our attention that there have been instances of fraudulent job offers, purporting to be from Sonaca North America and/or its affiliates ("LMI Aerospace"). This type of fraud is normally carried out through online services such as false websites, or through fake e-mails or call from people claiming to be from the company. These persons offer fraudulent employment opportunities to applicants and often ask for sensitive personal and financial information. The fraudsters may also request recipients to provide personal information and/or to make payments as part of their fake recruiting process. Sonaca North America does not ask for any financial commitments from candidates as a pre-employment requirement and will always require candidates to formally apply for positions via the Careers Page or job postings. Sonaca North America has no responsibility for fraudulent offers and if you believe you have been a victim of a fraudulent job offer concerning Sonaca North America, please email ******************.

WHO ARE WE Sonaca North America is driven by a passion for innovation and a commitment to excellence. As a leading provider of aerospace and defense solutions, we are dedicated to making air and space travel safe and sustainable. We have 13 locations across North America and our engineering expertise and operational excellence set us apart from the competition. Since the beginning in 1948, we have a proven track record of delivering high-quality products and services that are reliable, safe, and efficient. Our team of experts is dedicated to staying ahead of the curve in the aerospace and defense industry, utilizing the latest technologies and processes to ensure that we deliver the best possible solutions to our customers. POSITION SUMMARY We are currently seeking a Stress Engineer II. Under the direction of the Engineering manager, supervisor or lead this position will work with the Engineering team to ensure successful integration by providing stress analysis on engineering designs for components, systems and products using mathematical formulas and computer-aided engineering (CAE) systems. The Stress Engineer II will work both independently as well as part of a team to complete specific projects related to both commercial and military aircraft components to determine stress requirements of a product. ESSENTIAL JOB RESPONSIBILITIES The Stress Engineer II will work with a low level of supervision and must rely on experience and judgment to plan and accomplish goals while performing a variety of complex tasks in the following areas: Reviews designs and provides preliminary strength/stress assessments. Analyzes engineering designs, schematics, and customer specifications to determine stress requirements for a particular product. Formulates mathematical analysis or finite element model of product. Analyze ability of product to withstand stress imposed by conditions such as temperature, loads, motion, and vibration using mathematical formulas and computer simulation. Prepare preliminary stress analysis reports and provide information to supervisor or lead. Capable of airframe structural analysis for static and fatigue stresses. Perform structural analysis on conceptual layouts as well as detail components. Consult with Design Engineer to assess design modifications of product based on results of stress analysis. Will focus primarily on existing products and processes. Ability to perform classical hand stress calculations, finite element analysis utilizing finite element software such as NASTRAN or ANSYS. Participates with other staff to contribute to project completion. Performs other duties as required. EDUCATION AND EXPERIENCES Requires a bachelor's degree in engineering and a minimum of 5-9 years of experience in the Aerospace Industry or in a related field. Intermediate knowledge of finite element modeling, and familiarity with MS Office products. Basic knowledge of CATIA V5 WHY CHOOSE SONACA NORTH AMERICA? We take care of our people. 401(k) retirement savings plan with a percentage company-match contribution Competitive wages Paid holidays Paid time off Medical, dental, vision, life, and accidental insurance Short-term disability Long-term disability Employee assistance plan - for access to counseling, consulting, and other community resources Wellness program Tuition assistance Subject to eligibility, terms, and conditions Annual Salary Range = $103,000 - $170,580 This base pay range is specific to residents of California, Colorado, Connecticut, New Jersey, New York, Nevada, Ohio, Rhode Island, and Washington, and any other state that may require such disclosure. Compensation in other geographies may vary. This is only a summary of the typical functions of the job, not an exhaustive or comprehensive list of all possible job responsibilities, tasks, and duties. The responsibilities, tasks, and duties may differ from those outlined in the job description and other duties, as assigned, may be required. This document does not create an employment contract. Employees of the Company are employed on an “at will” basis and may be terminated at any time. Sonaca North America is an equal employment opportunity employer. Consistent with applicable law, Sonaca North America provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company's online application system. If an applicant is unable to fully access the online application system, Sonaca North America will provide a reasonable accommodation. Applicants with disabilities may contact us at ************ for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for Sonaca North America‘s Human Resources Department. Sonaca North America will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials. Sonaca North America is an E-Verify Employer. Sonaca North America is an Equal Employment Opportunity/Disability/Veterans Employer NOTICE ON FRAUDULENT JOB OFFERS It has been brought to our attention that there have been instances of fraudulent job offers, purporting to be from Sonaca North America and/or its affiliates (“LMI Aerospace”). This type of fraud is normally carried out through online services such as false websites, or through fake e-mails or call from people claiming to be from the company. These persons offer fraudulent employment opportunities to applicants and often ask for sensitive personal and financial information. The fraudsters may also request recipients to provide personal information and/or to make payments as part of their fake recruiting process. Sonaca North America does not ask for any financial commitments from candidates as a pre-employment requirement and will always require candidates to formally apply for positions via the Careers Page or job postings. Sonaca North America has no responsibility for fraudulent offers and if you believe you have been a victim of a fraudulent job offer concerning Sonaca North America, please email ******************.

Structural Integrity Associates, Inc. (SIA) is seeking a Senior Engineering Consultant to join our Nuclear business unit. The position will be based in one of our main offices: San Jose, CA; Centennial, CO; or Huntersville, NC. Remote work will also be considered. The ideal candidate will possess a background in mechanics/structural engineering and be responsible for engineering consulting work supporting the energy industry. The role will be to support project teams in the areas of finite element modeling, stress analysis, fatigue and fracture mechanics and related fields. The work environment is a dynamic team based on project requirements. Each project team is usually led by an industry expert and composed of engineers from various engineering disciplines such as stress analysis, fracture mechanics, structural dynamics, and material science. Primary Responsibilities: Stress analysis of power plant structures, pressure vessels, piping systems, rotating equipment and other power plant components using both classical and numerical methods Stress analyses using the guidelines in the ASME Boiler and Pressure Vessel Code Supporting and leading the FEA team Support fatigue management programs for various components Participation in design and repair projects of pressure vessel/piping components and Communication with clients to provide engineering problem solution, results and analyses Required Skills/Qualifications: BS or MS in Mechanical Engineering or similar discipline 5+ years (with MS) or 7+ years (with BS) of related engineering experience Advanced skills in ANSYS APDL/Workbench (ABAQUS is a plus) Advanced finite element analysis of vessel, piping, valves and other nuclear components Experience with mechanical, thermal, and modal analyses, and non-linear metallic material models Assist and lead in maintaining company standards related to finite element analysis Proficiency in Section III, Div 1 of ASME Boiler and Pressure Vessel Code (BPVC) Experience in Section III, Div 5 and Section XI, Div 1 & 2 of ASME BPVC is a plus Attend client, vendor, and internal team meetings Proficient in writing technical reports and communication skills Desired Skills/Qualifications: PE License Scripts and subroutines for finite element codes (e.g., python) Experience in computational fracture mechanics Experience in CFD simulations in ANSYS Project management skills Pay Range: The expected salary range for this role is $100,560-$168,240 in San Jose, CA; $85,840-$142,800 in Denver, CO; and $78,480-$131,760 in Charlotte, NC. Exact pay will be commensurate with experience. Export Control Notice: Certain positions at SIA may require access to information and technology which is subject to Export Administration Regulations 15 CFR 730-774, including those of the US Department of Energy (DOE) in 10 CFR 810 and Nuclear Regulatory Commission (NRC) 10 CFR Part 110. Hiring decisions for such positions must comply with these regulations and may result in SIA limiting its consideration of foreign nationals who are citizens of countries that are not on the DOE's Generally Authorized Destinations List: *************************************************************************************************** About Us: SIA is an engineering consulting firm serving various industries including Nuclear Power, Energy Services, Pipeline Integrity, and Critical Infrastructure. Join a team of internationally recognized experts in a culture based on knowledge, excellence, and respect for one another. Our employees are members of a distinct community of internationally respected professionals committed to quality, engineering innovation and a shared goal of building a safer world. Why Work at SIA? SIA offers a competitive salary and performance-based bonus program. Our retirement benefits include a Traditional 401k, Roth 401k, and an employer match. To help employees maintain a work-life balance, SIA also offers various paid time off including vacation, floating holidays, sick time, and parental leave. Our employees also enjoy a comprehensive benefits program that includes the following: Medical, dental, and vision insurance Life Insurance and AD&D Short-term and long-term disability Health Savings Account with employer contribution Flexible Spending Account for health care and dependent care ID theft protection and credit monitoring Structural Integrity Associates, Inc. is an equal opportunity employer. ***************** SIA does not welcome third-party recruiters, employment agencies, headhunters, etc. Please do not reach out to SIA employees requesting a call, sit down, meeting, or email response.

OTTO is developing the world's first fifth-generation business jet, designed for sustainability through the innovative use of advanced super-laminar aerodynamics and high-precision, net-shaped composites. Flight tests of our technology demonstrator validate a dramatic reduction in fuel burn and allow a sizeable improvement in cabin comfort. Otto Aviation is designing world-class aircraft from first principles physics and delivering ground-breaking aircraft and economic performance. Role Overview Otto Aviation is seeking an Engineer, Airframe Stress Analysis to be a member of our team. The ideal candidate has relevant stress analysis experience and a willingness to learn. You will join a team developing the world's most efficient aircraft. Otto Aviation is seeking engineers, who are comfortable working from first principles, work great in a team atmosphere and get things done. Responsibilities Perform stress analysis of metallic and composite structural components, assemblies and systems to provide inputs to the design and ensure structural integrity. Author analysis documentation. Create and/or utilize Finite Element Models (FEM). Perform Durability and Damage Tolerance (DADT) assessments. Review engineering definition for release in the product lifecycle system (PLM). Author structural test plans and reports. Compare structural test results to analytical models (test vs Finite Element Model). Support development of stress analysis tools and methodologies Support multi-disciplinary configuration development and trade studies Interface with materials & processes, structural test laboratories, flight test, manufacturing, and customers/regulation authorities Qualifications/Requirements B.S. in Mechanical or Aerospace Engineering, or equivalent 3+ years of relevant industry experience (or 1+ with M.S.) Strong verbal and written communication skills Knowledge of airframe static and fatigue stress analysis for both composite and metallic structures Knowledge of industry standard classical analysis methods Knowledge of Finite Element Analysis methods (FEMAP experience is a plus) Proficiency with CATIA V5/V6/3DX and ENOVIA V5/V6/3DX is a plus Interpersonal Skills Active Listening: Practice to gain insight and truly understand all project stakeholders. Critical Thinking: Make prompt, informed and value-based decisions for the project. Organization: Focus on agenda, schedules, frameworks, and methodologies, as well as communicating tasks, updates, progress, and blockers. Problem Solving: Assess issues from different vantage points and formulate the best solution in addressing specific challenges. Self-Motivation: Exude highest level of commitment and motivation to see it through from start to finish. Teamwork and Team Building: Establish a collaborative culture where people with unique personalities and skills happily work together and accountable to shared goal. Strong Business Communication: Use the right language, tone and storytelling techniques when communicating, describing, or explaining issues over email, chat, reports, presentations and other forms and channels of communication. Ability to work with domestic/international supplies/partners effectively Where You'll Be **This is a remote position, with travel to the company headquarters in Ft Worth, TX, 1 week every 4-6 weeks Benefits Otto Aerospace provides a robust benefits package that includes competitive salaries, subsidized medical, dental, and vision coverage, 401(k) opportunities, paid short term disability, voluntary long-term disability and additional term life, with 15 paid days off, 13-14 paid holidays, and paid sick leave. Depending on seniority and role, some roles qualify for potential bonuses and stock options. Otto Aerospace is an Equal Opportunity Employer We are committed to diversity, equity, and inclusion in every aspect of our hiring process. All applicants will be considered for employment regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability. We believe that a diverse team brings fresh perspectives, innovative ideas, and greater success. The more inclusive we are, the stronger we become. Applicants must be legally authorized to work in the U.S. #LI-Remote

You'll Come for a Job…But You'll Stay for an Exciting Career! Engineering and Designing Reliable, Responsive, Solutions. SINCE 1976, CANNON has provided creative solutions to clients in the energy industry, water resources, public infrastructure, and commercial and residential development. We work hard. We play hard. We have fun. JOIN CANNON as a STRUCTURAL DESIGN ENGINEER in IRVINE. Irvine offers warm weather, beautiful scenery, and is a top bicycling city with miles of on-road bicycle lanes and mountain bike trails. It is one of the safest communities and the public schools have consistently ranked among the best in California. PROJECTS INCLUDE Military and Aerospace, Commercial and Industrial Structures, Piers and Sea Walls, Foundations for Tanks and Equipment, Support Structures, Structural Assessments and Evaluations STRUCTURAL DESIGN ENGINEER JOB SUMMARY Completes tasks under the direction and supervision of a Project Manager or Senior Project Engineer. Provides basic engineering calculations and analyses support in the office and in the field on a variety of engineering projects. Supports designs and detailing of structural components for building/structure permit submittals. STRUCTURAL DESIGN ENGINEER JOB DUTIES Assists in developing the structural design for a variety of engineering projects. Performs calculations for components of structures. Creates construction plans and details for structures conforming with company standards. Works closely with team members to gain understanding of project requirements and tasks as well as office procedures, policies, and guidelines. Listens and communicates effectively with staff to maintain a team atmosphere. Works under budgets and timetables assigned by the Senior Project Engineer or Project Manager. Requirements Bachelor of Science Degree in Architectural or Civil Engineering with emphasize in structures from an accredited college. Minimum of 1 years' experience in structural analysis, design, and detailing of structures. Knowledge and experience in concrete, steel, and masonry structural systems. Knowledge and experience in commercial structural analysis and design software. Knowledge of the California Building Code and ASCE 7. Proficiency in AutoCAD and Revit is preferred. EIT preferred. WE OFFER competitive salaries, relocation assistance, excellent benefits package, remote work flexibility, and an active and positive team building, work environment. Cannon is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, age. Salary Description $32.94 - $49.41 hourly

The work location for this position is to be determined and will be communicated at the time of offer. Candidates must be willing to relocate to any First Solar location. Relocation assistance may be provided where applicable. First Solar reserves the right to offer you a role most applicable to your experience and skillset. Basic Job Functions: The primary responsibility of this job is to monitor and improve process operations and equipment in recycling, process water & wastewater plant at DNM site in accordance with First Solar and local/federal regulatory safety & environmental requirements. This person will conduct and coordinate process improvement activities and oversee project contractors and vendors to ensure that the process modifications are completed safely, on time and within the budget. They will be responsible for the safety and environmental compliance performance of the construction team during projects. This person will be responsible for ensuring corporate plant designs and specifications are being effectively attained during all phases of the process modification projects and that the process design intent is met. This person will also assist with new plant design concept development, detailed engineering design reviews, vendor selection, project planning and management, and plant startup/commissioning and/or process modifications/upgrades. International travel may be required. Education/Experience: Bachelor's engineering degree with 3-5 years' experience in chemical process improvements including product quality improvement, chemical process optimization, transitioning a R&D process into manufacturing & enhancing equipment life. Experience in managing consultants, vendors, and contractors in chemical processes design upgrades. Material handling systems design, piping design and process control design experience. Managing plant equipment preventive maintenance programs. New plant start-up, process troubleshooting & hazardous material handling experience. Project management for chemical processes and/or mechanical systems, including managing scope, schedule, and cost. Required Skills/Competencies: Skills to read and interpret Process & Instrumentation Drawings, detailed engineering design drawings and bill of materials (electrical, mechanical, civil, process controls, etc.) Strong statistical analysis and chemical process development skills. Strong drive to transfer ideas to practical use in chemical process manufacturing environment through all stages of process development including process qualification. Project management skills to control project schedule & financial budget Chemical process operations skills with ability to coordinate process engineering activities with night shift operations crew members & multiple vendors / contractors. Industrial equipment erection, installation, start-up, and troubleshooting experience. Strong mechanical and process control aptitude with troubleshooting skills Fluent computer skills in (MS Word, MS Excel, MS Project, MS Access, and AutoCAD) Strong communication skills, both written and verbal in English & Vietnamese languages Essential Responsibilities: Develop, evaluate & implement novel approaches to continuously improve water, wastewater & recycling plant processes to support solar panel manufacturing operations. Conduct plant process material balance studies & develop techniques to improve recovery rates of precious metals and to reduce Cd emissions in the effluent streams. Conduct process effluent stream sampling and process water consumption studies to support waste minimization & overall water consumption reduction projects. Take lead to troubleshoot chemical process problems and implement corrective actions to improve process efficiency, product quality and to reduce the overall plant operating cost. Monitor and improve equipment up-time by managing equipment preventive maintenance program. Responsible for developing engineering process design specification package for vendor selection, construction project planning and oversight of recycling & wastewater projects. Work with purchasing to establish acceptable technical terms and conditions for global recycling & water treatment equipment and projects. Assist management to develop capital budgets and coordinate project activities, to ensure that all project deliverables are met on time and within budget. Work with site & corporate team to ensure that all safety & compliance goals are met. Lead startup of new processes and/or process modifications at existing/new plants sites. Develop new process operating procedures & train operations crew members including night shifts. Creating effective communications to foster team building. Strict adherence to all safety procedures and good housekeeping standards. Travel: 10% - 20% International travel may be required. If hired during plant start up, you will be expected to travel to other First Solar locations for training. Estimated Salary Range: 67,400.00 - 96,000, Annually US Physical Requirements: Will sit, stand, or walk short distances for up to 12 hours per day. Will climb stairs or steps on a frequent basis. Will lift up to 58 pounds on an occasional basis, according to work instruction. Will lift up to 37 pounds on a frequent basis. Will push or pull up to 50 pounds of force on an occasional basis. Will push or pull up to 37 pounds of force on a frequent basis. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis. 20/40 vision in both eyes (with or without correction) and the ability to distinguish between red, yellow, and green is required. May reach above shoulder heights and below the waist on a frequent basis. May stoop, kneel, or bend, on an occasional basis. Must comply with all safety standards and procedures. Ability to wear personal protective equipment is required (including, but not limited to: steel-toed shoes, cut-resistant gloves, jackets, aprons &/or arm guards, safety glasses or goggles, hearing protection & respirators) and a condition of employment and continued employment (may require little or no facial hair). Office Physical Requirements: All positions in our office require interaction with people and technology while either standing or sitting. To best service our customers, internal and external, all associates must be able to communicate face-to-face and on the phone with or without reasonable accommodation. First Solar is committed to compliance with its obligations under all applicable state and federal laws prohibiting employment discrimination. In keeping with this commitment, it attempts to reasonably accommodate applicants and employees in accordance with the requirements of the disability discrimination laws. It also invites individuals with disabilities to participate in a good faith, interactive process to identify reasonable accommodations that can be made without imposing an undue hardship. Potential candidates will meet the education and experience requirements provided on the above job description and excel in completing the listed responsibilities for this role. All candidates receiving an offer of employment must successfully complete a background check and any other tests that may be required. Equal Opportunity Employer Statement: First Solar is an Equal Opportunity Employer that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that diversity and inclusion is a driving force in the success of our company.

Landmark is a leading provider of engineering, construction, and asset management services for storage solutions in the water, wastewater, power, and industrial markets. We operate throughout North American and have built our reputation on delivering the most challenging projects with a high degree of efficiency and precision. Challenging the norm and innovating better methods is core to our approach. Position Overview The Structural Engineer role provides a wide range of engineering support in a fast-paced design-build environment for tanks and tank-related structures for the municipal water and industrial markets. Essential Duties and Responsibilities * Provide engineering for large capacity, field erected storage tanks. Analyze/design steel plate and reinforced concrete structures. Interpret geotechnical reports to select and design complex foundations. * Apply customer specifications, design standards, and building codes including: AWWA D107 & D100, IBC, ASCE, ACI, and AISC. * Direct and oversee detailing work; prepare & seal calculations and drawings. * Perform post-design services for troubleshooting and problem resolution. * Provide specialist support and interact closely with other departments: QA/QC, Safety, Construction Operations, Project Management, Procurement. * Work with estimators to prepare bid designs; review vendor submittals. * Design construction equipment and systems; develop erection procedures. * Design appurtenant structures in wood, masonry, structural and cold-formed steel. Education * Bachelor Degree in Structural or Civil Engineering Experience Required * Professional Engineer or Structural Engineer license, or ability to become a licensed PE/SE * Minimum of five years of experience in a design engineer role for similar structures * Practical knowledge of the construction of storage tank projects * Working knowledge of codes & standards: AWWA, IBC, ASCE, ACI, and AISC Qualifications Desired * Design-Build project experience * Familiarity with Finite Element Analysis (FEA) software * Practical knowledge of the fabrication of storage tanks * Proficiency with drafting software including AutoCAD/Inventor EOE, including disability/vets If you have a question, or need an accommodation as part of the employment process, please contact Human Resources at ************************ Landmark is an Equal Opportunity Employer View Company Information To see other positions, click here.

Design and check building components -- steel joists and metal deck -- in accordance with contract documents to meet industry codes, manufacturing efficiencies, and shop schedules while being consistent with our corporate mission, values and department objectives ESSENTIAL FUNCTIONS: Perform structural steel design to ensure individual truss members and welds meet the requirements of applicable specifications and codes (SJI, SDI, AISC, AWS, etc.) Verify specification of steel deck based on requirements presented in the contract documents Design building components through the use of computer software and supplementary tools Redesign members for greater economy and compare design weight with sales weight to maximize profitability Review contract documents and drafting work for completeness and proper depiction of special loading conditions Generate shop fabrication documents and clarify and resolve questions from the fabrication facility Understand CSC's products and processes and contribute to improvement activities Communicate and resolve issues with the design team, customer, and field personnel Meet shop schedule requirements and coordinate with project managers for customer requests Maintain a positive work atmosphere by behaving and communicating in an effective manner with customers, coworkers, and supervisors Performs other job duties as assigned by supervisor

About IEM Industrial Electric Mfg. (IEM) is the largest independent full-line manufacturer of custom power distribution systems in North America. Founded more than 75 years ago in Fremont, California, IEM grew alongside Silicon Valley and today operates over 1.7 million square feet of manufacturing capacity. With $1B+ in annual sales and 10,000+ commissioned projects across technology, data centers, commercial, energy, utilities, healthcare, industrial, and infrastructure markets, IEM continues to deliver exceptional product quality, dependable service, and the flexibility to meet complex technical requirements at scale. Position Summary The Lead Analysis & Simulation Engineer is responsible for leading a team tasked with defining and implementing simulation methods and tools supporting research and new product development. This role requires expertise in advanced analysis techniques, simulation tools and a solid understanding of the underlying concepts in physics. This role specializes in conducting thermal, mechanical, electromagnetic, and multiphysics simulations to validate and drive innovation in product designs that support IEM's commitment to powering what's next. Ideal Candidate Profile The ideal candidate is a visionary technical leader who thrives in a fast-growing environment and is eager to shape and expand a new Analysis & Simulation program. They combine deep simulation expertise with a strategic mindset-taking the time to understand the business, identify high-impact opportunities, and build a capable team that drives meaningful engineering and product value. Key Responsibilities Set priorities, assign tasks, and ensure high-quality, on-time delivery of simulation work. Provide technical oversight, performance feedback, and professional development guidance. Establish and enforce best practices, documentation standards, and validation protocols across the simulation team. Lead the development and implementation of analytical tools and simulation models to predict thermal, mechanical, dielectric, and electromagnetic performance. Guide and review team analyses including CFD, FEA, electromagnetic and electrostatic simulations for design validation and optimization. Integrate simulation results with physical test data to validate models and refine design criteria. Collaborate with cross-functional teams (Design, Testing, Manufacturing, and Product Management) to translate simulation insights into actionable design recommendations. Drive continuous improvement in simulation accuracy, efficiency, and integration with digital design workflows. Evaluate and recommend new simulation tools, techniques, and training to advance team capabilities. Represent the Analysis & Simulation discipline in design reviews, technical discussions, and innovation initiatives. Qualifications Strong understanding of thermal, electromagnetic, and structural principles relevant to power distribution equipment. Expertise in multiphysics Finite Element Analysis (FEA) and Computational Fluid Dynamics (CFD) methods using tools such as Ansys or COMSOL. Familiar with three-phase electric power concepts, power distribution systems, power control and protection strategies. Familiarity with statistical analysis methods to interpret and utilize empirical data effectively. Excellent communication and technical writing skills. Team-oriented mindset with excellent interpersonal skills. Minimum 5 years of experience designing, testing or analyzing low and/or medium voltage power distribution equipment or related products. Bachelor's degree in Mechanical Engineering, Electrical Engineering, or a related discipline; advanced degree preferred. Design Experience using Solidworks is highly preferred. Experience with common standards for electrical equipment (UL 891, 1558, 508A; IEEE C37.20, etc.) is a plus. Workplace Conditions An on-site work schedule based out of our R&D Innovation Center in Tualatin, OR is preferred. Remote positions may be available for the right candidate. Why Join IEM At IEM, you'll join a team that powers some of the world's most ambitious projects. We're engineers, makers, and problem-solvers who thrive on tackling complex challenges and delivering solutions that keep industries moving forward. If you're driven, collaborative, and ready to make an impact, we'd love to hear from you. Your creativity and passion can help us achieve great things-come be part of the journey. Learn more about IEM at ********************* We offer comprehensive and competitive benefits package designed to support our employees' well-being, growth, and long-term success. View a snapshot of our benefits at *********************/careers Recruiting Scams Beware of recruiting scams. IEM never charges candidates fees, and all recruiter emails come from ************* address. If you suspect fraudulent activity, do not share personal information and report it to us at iemfg.com/contact Non-Discrimination Statement IEM does not discriminate against any applicant based on any characteristic protected by law. Privacy Information collected and processed as part of your IEM Careers profile, and any job applications you choose to submit is subject to IEM's Workforce Member Privacy Policy.

Handshake is recruiting Aerospace Engineer Professionals to contribute to an hourly, temporary AI research project-but there's no AI experience needed. In this program, you'll leverage your professional experience to evaluate what AI models produce in your field, assess content related to your field of work, and deliver clear, structured feedback that strengthens the model's understanding of your workplace tasks and language. The Handshake AI opportunity runs year-round, with project opportunities opening periodically across different areas of expertise. Details The position is remote and asynchronous; work independently from wherever you are. The hours are flexible, with no minimum commitment, but most average 5-20 hrs The work includes developing prompts for AI models that reflect your field, and then evaluating responses. You'll learn new skills and contribute to how AI is used in your field Your placement into a project will be dependent on project availability-if you apply now and can't work on this project, more will be available soon. Qualifications You have at least 4 years of professional experience The examples below reflect the types of real-world responsibilities that you might have had in your role that will give you the context needed to evaluate and train high-quality AI models Formulate mathematical models or other computer analysis methods to develop, evaluate, or modify designs in accordance with customer engineering requirements. Plan or conduct experimental, environmental, operational, or stress tests on models or prototypes of aircraft or aerospace systems and equipment. Develop conceptual designs for aeronautical or aerospace products or systems to meet customer requirements or comply with environmental regulations. Plan or coordinate the investigation and resolution of customer-reported technical issues with aircraft or aerospace vehicles. Write technical reports and documentation, such as handbooks or bulletins, for engineering staff, management, or customers. Direct or coordinate the activities of engineering or technical personnel involved in the design, fabrication, modification, or testing of aerospace products. Evaluate product data or design outputs from inspections or reports for compliance with engineering principles, customer requirements, environmental regulations, and quality standards. Develop design criteria for aeronautical or aerospace products or systems, including testing methods, production costs, quality standards, environmental standards, and delivery timelines. Analyze project requests, proposals, or engineering data to assess feasibility, manufacturability, cost, and production timelines. Maintain records of performance reports for future reference and analysis. Diagnose performance issues by reviewing customer or field engineer reports or by inspecting malfunctioning or damaged products. Direct aerospace research and development programs. Evaluate and approve vendor selections by reviewing past performance or new offerings. Design new or modify existing aerospace systems to reduce pollutant emissions, including nitrogen oxides, carbon monoxide, and smoke. Design or engineer filtration systems to reduce harmful emissions. Develop and test autonomous systems for uncrewed aerospace vehicles. Develop software for aerospace systems. Evaluate biofuel performance specifications to determine feasibility for aerospace applications. You're able to participate in asynchronous work in partnership with leading AI labs. Application Process Create a Handshake account Upload your resume and verify your identity Get matched and onboarded into relevant projects Start working and earning Work authorization information F-1 students who are eligible for CPT or OPT may be eligible for projects on Handshake AI. Work with your Designated School Official to determine your eligibility. If your school requires a CPT course, Handshake AI may not meet your school's requirements. STEM OPT is not supported. See our Help Center article for more information on what types of work authorizations are supported on Handshake AI. #indhp

Join Us: Finding a better way. At CHA, we believe in the power of clean water, resilient energy, safer roads, and structures that harmoniously blend with their surroundings. We create solutions. We help People. We improve our world. At CHA, we embed ourselves in our communities - and take pride in improving things where we live. At the foundation is a commitment to inclusion and diversity and choosing to treat everyone with dignity and respect. We also take accountability for making decisions that promote sustainability in our business and our designs. We are on a mission to reduce our environmental footprint and bring greener solutions to our clients. We are responsibly creating a more sustainable future in ways that we can all see and touch. Together. Every day. CHA Consulting, Inc. is currently seeking a Hydraulic Engineer to join our Infrastructure - Bridge Team working remotely or at our Atlanta, GA; Hartford, CT; Albany, NY; Columbia, SC; Indianapolis, IN; or Columbus, OH office. This position offers fully remote capabilities; however, occasional on-site responsibilities may be required if you are located near a CHA office. What You'll Do: CHA's bridge team has been recognized as one of the leading innovators in the industry. We are on the forefront of bridge design developing new solutions that reduce cost and maintenance and utilize accelerated bridge construction (ABC) techniques to reduce road closure impacts. We incorporate collaborative and diverse thinking with practical and cost-effective designs that responsibly improve mobility and safety throughout the United States. The Hydraulic Engineer conducts the design development, implementation, and technical analysis of various systems to implement new products, or changes to an existing scheme, to suit individual client needs. At CHA, the professional in this role works on multiple projects in a timely and cost-effective manner to meet client, contractual and company requirements. The Hydraulic Engineer monitors progress and performance against the project plan and acts immediately to resolve operational problems and minimize delays, as well as recognizes technical discrepancies in analytical results, and makes appropriate corrections. This individual identifies, develops, and gathers technical resources necessary to complete assignments. The Hydraulic Engineer completes field assignments when appropriate. At CHA, you can build a career and find your passion across our diverse business lines and project teams. Being part of CHA means being part of a team of talented professionals, where you'll find support for your career growth and the opportunity to impact our industry and our communities. Find your "why" at CHA! What You Bring: * Bachelor's Degree in Civil Engineering is required * Engineer-in-Training (EIT) certification required * Professional Engineer (PE) license is preferred * Minimum of 3 years of related engineering experience is required * Hydraulic experience required * Demonstrates a strong working knowledge of the hydraulic engineering field, including Scour calculations, FEMA floodway, and Bridge Hydraulic analysis, as well as proven ability to practically apply it in a professional environment * Proficient in engineering, computational, and modeling software (HEC-RAS, TR-20, SMS SRH2D, AutoCAD, MicroStation, etc.) * Experience with Open Channel required * Understands QA/QC procedures * Effective verbal and written communication skills with the ability to adapt communication style to suit various audiences * Desire to work in a collaborative team environment with the willingness to assist more senior staff * Proficiency with Microsoft Office software required * Participation in a professional engineering society/organization is preferred Salary Range: $90,000 - $100,000 Salary is based on a variety of factors, including, but not limited to, qualifications, experience, education, licenses, specialty, training, and fair market evaluation based on industry standards. Culture/EEO Statement: At CHA, we work every day to create solutions, help people, and improve our world, committed to creating and fostering excellence in our diverse and highly talented teams. Our teams continually strive to find better ways - always searching, never settling - to achieve extraordinary results. Our values around hiring, training, and community engagement reflect a company culture that is inclusive and forward leaning, always pushing the limits of what is possible. We as an organization celebrate the values of inclusion and equality, and advocate for the full participation of all people in an environment free of discrimination. To support these values, we invite all qualified applicants to be considered for employment regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, age, disability, protected veteran status, or any other characteristic protected by law.

Space Vehicle Systems Engineer ESS Space El Segundo, CA (Remote) Who We Are Aurex is a mission-focused aerospace and defense company building the next frontier of deterrence. From hypersonics and missile defense to hardened networks and orbital systems, we design, test, and deliver the platforms that turn unproven ideas into battlefield-ready capability. Born in Huntsville and built for speed, Aurex brings together aerospace veterans, combat-tested operators, and forward-leaning technologists to solve problems that matter fast. We move from whiteboard to warfighter with precision, clarity, and zero tolerance for fluff. Basic Qualifications 7+ years of experience with space vehicle systems engineering, planning, integration, and testing 7+ years of experience with systems engineering, planning, integration, and testing of at least 2 of the following subsystems and its components: structural, power, attitude control, thermal, propulsion, or communications 3+ years of experience with reviews of space systems, including SRR, SDR, SFR, PDR, CDR, TRR, FCA, SVR, MRR, or PCA, and the DoD acquisition system Ability to be highly motivated, have a dynamic work ethic, and contribute to the DoD mission Ability to communicate and establish collaborative relationships with government clients and contractor teammates Active DoD Secret clearance Bachelor s degree in Engineering, Mathematics, Physics, or Computer Science Preferred Qualifications 10+ years of experience with space vehicle systems engineering, planning, integration, and testing Experience with computer tools, including Confluence or JIRA Experience with designing, building, and testing of communications antennas, transmitters, or receivers of a payload Knowledge of Mission Assurance, Strategic or Tactical MILCOM related payload development Knowledge of DoD systems engineering, test, and production policies and practices Ability to perform multiple systems engineering and program management functions in support of design reviews and requirements verification Possession of excellent interpersonal skills ?Possession of excellent oral and written communication skills TS/SCI clearance How You Will Be Rewarded We offer a comprehensive total rewards approach to compensation, providing incentives and benefits that extend far beyond the base salary. Compensation is determined by the candidate s work experience, education, training, and relevant skills. We offer a competitive benefits package designed to support our employees' health, well-being, and professional growth. Location: El Segundo, CA (Remote) _________________ The salary range for this role is $175,000 - $225,000 annually. Aurex is an Equal Opportunity Employer. It prohibits discrimination, retaliation, or any type of harassment on the basis of race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, veteran status, citizenship, immigration status, or any other legally protected status in employment, including in hiring, firing, and recruiting decisions. All applicants must be authorized to work lawfully in the United States for positions at Aurex. There may be limited circumstances in which a law, regulation, executive order, or government contract would require certain citizenship; only in those limited circumstances would Aurex require certain citizenship status to comply with the relevant law, regulation, executive order, or government contract applicable to that position. For all other positions, Aurex does not consider an applicant s citizenship but only requires that the applicant be authorized to work lawfully in the United States. If a position is one that falls under export control laws and regulations requiring authorization from the U.S. government to access export-controlled items, any hiring is contingent on the applicant passing the export compliance assessment, which is separate from the I-9 process, for that specific position. A background check will be required prior to any hire. Elevate your career by joining the Aurex Platform, a leader in aerospace innovation!

GFT is seeking an Entry Level Geotechnical Engineer - Geotechnical Designer to join our Geotechnical Dams & Hydraulics Team in Ohio! This role follows a hybrid work model, requiring regular attendance at either our Columbus or Cleveland, Ohio office. Joining the dams and hydraulics team at GFT means contributing to innovative solutions for sustainable water management and infrastructure. Our team excels in dams and levees, advanced water and wastewater treatment, stormwater management, and conveyance, collection, and transmission. With a focus on integrating technology, sustainability, and compliance, we consider each water resources and environmental remediation project a chance to innovate and evolve to protect public health and enhance quality of life. Explore some of our signature water resources and environmental projects here. What you'll be challenged to do:This is an excellent career opportunity for an entry level, motivated Geotechnical Engineer - Designer who thrives in a collaborative team environment. We will consider relocation for the right candidate. In this capacity, the successful candidate will be responsible for the following: * Perform geotechnical calculations and designs for various projects and facilities, including, but not limited to shallow and deep foundations, retaining structures, settlement, tieback anchors, soil nails, slope stability and seepage studies. * Assist in the preparation of written reports and documentation, geotechnical correspondence, design and construction drawings and specifications. * Assist in the planning of subsurface explorations and laboratory testing investigations. * Execute subsurface investigations in support of geotechnical design and evaluation efforts, including test boring inspection, site reconnaissance, and other data collection activities as required. * Provide specialty geo-construction observation during the construction phase of various projects. * This position requires travel on an as-needed basis to other GFT offices, client offices, or project work sites and will include overnight/out-of-town travel What you will bring to our firm: * Bachelor's degree in Civil Engineering from an ABET-accredited college or university. * 0-4 years of geotechnical experience with an emphasis in subsurface exploration and/or design and development of geotechnical deliverables including reports, drawings, and specifications. * EIT or ability to obtain within first 6 months of hire. * Experience with common geotechnical software programs such as SLIDE, SLOPE/W, LPILE, APILE, GROUP, GRLWEAP, Settle3 and gINT. * A demonstrated interest in geotechnical engineering through applied coursework, work experiences, or internships. * Strong written and verbal communication skills. * Strong analytical, organizational, and report writing skills. * Ability to work independently and within a team environment. * Excellent field observation and data collection/documentation skills. * Must be able to work outdoors in all seasons. * Must be capable of lifting 30 pounds and traversing steep slopes and rough terrain. * Must have valid Driver's License. What we prefer you bring: • Master's Degree with a Geotechnical focus is strongly preferred Featured Benefits: • Hybrid (in-person and remote) work environment.• Comprehensive benefits package including wellness programs, parental leave, and pet insurance, in addition to medical, dental, vision, disability, and life insurance.• Tax-deferred 401(k) savings plan.• Competitive paid-time-off (PTO) accrual.• Tuition reimbursement for continued education.• Commitment to professional development, access to internal and external training programs, and support of active participation in professional organizations• Incentive compensation for eligible positions. At GFT, a privately held AEC firm, we innovate where transportation, water, power, and buildings converge. We call this the Infrastructure of Life. We measure our success by the strength of our relationships - that's why we're the employer of choice for 5,000+ of the industry's brightest engineers, planners, architects, inspectors, designers, and more. Our clients choose us for our expertise and prefer us for our nimble approach, creativity, and personal touch. Backed by over a century's experience, together we're building a lasting legacy for future generations: stronger communities, a healthier planet, and better lives.GFT: Ingenuity That Shapes Lives is an Equal Opportunity Employer. All qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veterans' status or other characteristics protected by law. Unsolicited resumes from third party agencies will be considered the property GFT. Location: Columbus, OH, or Cleveland, OHCore Business Hours: 8:00 AM - 5:00 PMEmployment Status: Full-Time Salary Range: $70,000 - $90,000 Salary dependent upon experience and geographic location GFT does require the successful completion of a criminal background check for all advertised positions. #LI-Hybrid #LI-SS1

Help us automate and maintain our future. Get ready for a job that encourages you to think strategically yet stay connected with your teams. Do you have problem-solving or strategy experience? If so, prepare to innovate, create, and inspire. The Pharmacy Automation Engineer (Automation Engineering Lead Analyst) is primarily responsible for providing first-level electrical and process Controls support for a highly-automated pharmaceutical filling and packaging system. Perform emergency, corrective, and preventive maintenance activities to restore equipment. In addition, key responsibilities will involve implementing equipment and system upgrades, engineering change controls, and continuous improvements. The position will support equipment installations, upgrades, or equipment expansions. Automation engineer also trains, mentors, and supports the development of other team members Responsibilities Performs advanced level maintenance and service on automated equipment by using and understanding electrical, mechanical, and pneumatic drawings and schematics, and using special test equipment and tools. Maintains reliability of the pharmacy automation equipment by executing preventive, corrective, and emergency work orders. Troubleshoot, service, install and repair automated production equipment, to include equipment modifications, upgrades, and spare parts inventory Utilizes knowledge and skill to monitor and improve the Mean Time Between Failures (MTBF) of the electro-mechanical equipment, and supporting application software systems. Observe system for degraded performance using routine inspections, maintenance rounds, and diagnostic equipment. Use a computerized maintenance management system (MAXIMO) to record labor hours, repair parts, and monitor pharmacy equipment performance. Recommend alterations to developers and designers to improve the quality or performance of processes and/or machines. Interpret the output of the reporting systems and take appropriate action that will result in the removal of the root cause problem from the system on a permanent basis. Document all emergency, corrective, and preventive maintenance work via work orders associated with Computerized Maintenance Management System (CMMS - MAXIMO). Operates on-site in an on-call capacity. Qualifications High School diploma; Associates degree preferred. Associate's degree in Industrial Maintenance or related technical field or 2+ years of maintenance experience in an industrial setting preferred. 0+ years of relevant experience with a Bachelor's Degree and mechanical electrical experience related to automated, industrial equipment preferred. Experience working in high volume production or pharmaceutical environment. Experience in troubleshooting complex PLC/computer-operated electro-mechanical equipment; PLC's, I/O, and field devices; repairing, setting up, adjusting, and tuning mechanical systems and pneumatic systems. Experience using of all tools and procedures needed to repair precision electro-mechanical machinery successfully the first time. Experience using preventive and predictive maintenance techniques. Experience using Maintenance Management Systems (CMMS) to report and follow-up on maintenance procedures and work orders. Flexibility to occasionally work outside of normal shift hours, including occasional weekends, as needed to satisfy operational requirements in support of customer demand. Minimal travel to other ESI facilities or vendor sites is possible. Shift schedule: Sunday - Thursday (6am-2:30pm). If you will be working at home occasionally or permanently, the internet connection must be obtained through a cable broadband or fiber optic internet service provider with speeds of at least 10Mbps download/5Mbps upload. About The Cigna Group Doing something meaningful starts with a simple decision, a commitment to changing lives. At The Cigna Group, we're dedicated to improving the health and vitality of those we serve. Through our divisions Cigna Healthcare and Evernorth Health Services, we are committed to enhancing the lives of our clients, customers and patients. Join us in driving growth and improving lives. Qualified applicants will be considered without regard to race, color, age, disability, sex, childbirth (including pregnancy) or related medical conditions including but not limited to lactation, sexual orientation, gender identity or expression, veteran or military status, religion, national origin, ancestry, marital or familial status, genetic information, status with regard to public assistance, citizenship status or any other characteristic protected by applicable equal employment opportunity laws. If you require reasonable accommodation in completing the online application process, please email: ********************* for support. Do not email ********************* for an update on your application or to provide your resume as you will not receive a response. The Cigna Group has a tobacco-free policy and reserves the right not to hire tobacco/nicotine users in states where that is legally permissible. Candidates in such states who use tobacco/nicotine will not be considered for employment unless they enter a qualifying smoking cessation program prior to the start of their employment. These states include: Alabama, Alaska, Arizona, Arkansas, Delaware, Florida, Georgia, Hawaii, Idaho, Iowa, Kansas, Maryland, Massachusetts, Michigan, Nebraska, Ohio, Pennsylvania, Texas, Utah, Vermont, and Washington State. Qualified applicants with criminal histories will be considered for employment in a manner consistent with all federal, state and local ordinances.

About Us A fully owned subsidiary of Quanta Services, Inc. (NYSE: PWR), FiberTel, LLC. is locally grown in Utah's Art City and has rapidly expanded over the Northwest and Western regions. As an advocate for economic growth in the state of Utah, Idaho, Washington, Oregon, Nevada, and California we understand the business of conveying information. With all that is happening in our state and nationwide, we are seeing different ways of life, work, and school. The increase in work from home and online school has put a strain on internet providers and their bandwidth. Internet Providers are relying heavily on us to continue the construction and installation of fiber optics to ensure that internet service goes uninterrupted for the people of our communities. We are a utility construction company, with a specialization in the installation of fiber optics. We offer a full turnkey experience for our clients. For our employees, we offer rewarding benefits including medical, dental, and vision insurance, paid vacation, paid holidays, and 401k (with company match). We are an Equal Opportunity Employer and participate in E-Verify. About this Role FiberTel is looking for a Project Field Coordinator for our Sacramento, CA location. Job sites are located in Sacramento, Santa Rosa, and Vallejo so some travel should be expected. This position is responsible for providing field and administrative project support to the project as well as project coordination regarding our construction efforts in relation to fiber and telecom. Pay: $28-34/hr, DOE - Subject to CA to Prevailing Wage Rates and may change depending on work location and job duties. What You'll Do Incumbent must have the skills, ability, and judgment to perform the following essential job duties and responsibilities: Works with a team of Construction Managers & other Construction Coordinators to ensure administrative/field activities are completed for OSP-West projects. Supports department with timecards, materials tracking, mark for locates, daily reports, scheduling, cost control, change-order tracking, vendor and subcontractor tracking, client billing, and pay invoices Assists Project Team with preparation of bid documentation and helps to prepare for bid reviews Meets work standards by following productivity, quality, and customer-service standards, resolving operational problems; identifying work process improvements as necessary Helps meet cost standards by monitoring expenses; implementing cost-savings actions Updates job knowledge by going to the field, participating in educational opportunities, getting to know/understand division. Enhances department and organization reputation by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments. Other duties as assigned What You'll Bring Associates or bachelors preferred, not required Prefer 1-2 years of experience in construction coordinator role or related field Excellent communication skills Reasoning ability, including problem solving and analytical skills Microsoft Office and Outlook Email Time Management and project management skills Travel requirements: to job sites as needed. Valid Driver's License What You'll Get Benefits Include: Company vehicle Health Insurance: Medical, Dental, Vision Plans Flexible Spending Accounts/Health Savings Accounts Retirement Savings Plan (401K) with company matching Short & Long Term Disability Supplemental Life and AD&D Insurance Paid Holidays and Vacation Competitive Pay * Pay is based on the knowledge, skills, and abilities of the employee. Applicants are required to pass all company drug testing, submit to a background check and adhere to all OSHA, state, city/municipality safety requirements and training provided by the company as required Our Company is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind including, based on disability and protected veteran status. The Company's policy is not to discriminate against any applicant or employee based on race, color, sex, sexual orientation, gender identity, genetic information, religion, national origin, age, disability, veteran status, or any other basis protected by applicable federal, state, or local laws. The Company also prohibits harassment of applicants or employees based on any of these protected categories. It is also the Company's policy to comply with all applicable state and federal laws respecting consideration of unemployment status in making hiring decisions. Please visit the following URL to view the EEO is the Law poster and the Supplement. (*************************************************************** The Company also does not consider criminal convictions to be an absolute bar to employment and will consider qualified applicants with criminal histories. Applicants applying for positions in Illinois are not required to disclose arrests or sealed or expunged records of convictions. FiberTel, LLC Compensation Range The anticipated compensation for this position is USD $28.00/Hr. - USD $32.00/Hr. depending on experience and qualifications. Equal Opportunity Employer All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, national origin or ancestry, sex (including gender, pregnancy, sexual orientation, and/or gender identity), age, disability, genetic information, veteran status, and/or any other basis protected by applicable federal, state or local law. We are an Equal Opportunity Employer, including disability and protected veteran status. We prohibit all types of discrimination and are committed to providing access and equal opportunity for individuals with disabilities. For additional information or if reasonable accommodation is needed to participate in the job application, interview, or hiring processes or to perform the essential functions of a position, please contact us the Company's Human Resources department.