Structural Component Systems jobs in Omaha, NE

The Forklift Inventory Specialist is responsible for performing inventory control functions in a fast-paced warehouse environment. This role requires the majority of time to be spent operating a forklift to load, unload, and transport materials and products. The specialist ensures all stock is accurately managed, properly stored, and tracked within the inventory system. Essential duties and responsibilities Forklift operation: Safely operate a forklift, including sit-down, stand-up, and other industrial vehicles, to transport materials throughout the facility. Load and unload incoming and outgoing shipments from trucks and other vehicles. Stack and organize pallets and other materials in designated storage bays, prioritizing safety and efficient space utilization. Perform daily pre-operation inspections on the forklift and report any maintenance issues or safety concerns to the supervisor. Inventory management: Use a warehouse management system (WMS), RF scanners, or other inventory software to accurately track, receive, and store goods. Conduct regular cycle counts and periodic inventory audits to ensure physical stock levels match system records. Investigate and resolve any inventory discrepancies, such as shortages, overages, or damaged products, and report findings to management. Ensure proper stock rotation (e.g., First-In, First-Out) to minimize waste and prevent obsolescence. Coordinate with other departments, such as shipping and production, to fulfill and track orders. Warehouse and safety maintenance: Ensure all materials are properly packaged, labeled, and secured for transport. Adhere to all safety protocols, company policies, and Occupational Safety and Health Administration (OSHA) regulations. Maintain a clean and orderly work area by performing general housekeeping duties. Assist with other general warehouse duties as needed. Required skills and qualifications High school diploma or GED equivalent. Valid forklift operator certification. Demonstrated experience operating forklifts in a warehouse or production environment. Proficiency with inventory management software, RF scanners, and computer systems for data entry. Strong attention to detail and a high degree of accuracy in counting and tracking inventory. Ability to speak, write, and read English and interpret various documents, such as work orders, shipping manifests, and safety guidelines. Excellent communication and teamwork skills to coordinate with managers, drivers, and other warehouse staff. Physical ability to stand for extended periods and perform heavy lifting (up to 50-75 pounds) when necessary.

We want you to help us shape the future of shopping experiences and deliver on our purpose of connecting people with the products and experiences that enrich their lives. Joining Retail Odyssey, an Advantage Solutions company, means joining a network of 65,000 teammates serving 4,000+ brands and retail customers across 40+ countries. All the while, being provided the opportunities, support, and enrichment you need to grow your career. In this role, you will provide in-store merchandising support to Retailers to meet shoppers' needs. This includes building displays and end caps, resetting shelves with product rotation, and tracking inventory to ensure that stores and suppliers maximize sales opportunities. Are you ready to shape the future of shopping and get it done with us? What we offer: Competitive wages; $15.00 per hour Growth opportunities abound - We promote from within No prior experience is required as we provide training and team support to help you succeed Additional hours may be available upon request We offer benefits that can be customized to meet your family's needs, including medical, dental, vision, life insurance, supplemental voluntary plans, wellness programs, and access to discounts through Associate Perks Now, about you: Are comfortable interacting with customers and management in a friendly, enthusiastic, and outgoing manner You're 18 years or older Can perform physical work of moving, bending, standing and can lift up to 50 lbs. Have reliable transportation to and from work location Demonstrate excellent customer service and interpersonal skills with our clients, customers and team members Are a motivated self-starter with a strong bias for action and results Work independently, but also possess successful team building skills Have the ability to perform job duties with a safety-first mentality in a retail environment If this sounds like you, we can't wait to learn more about you. Apply Now!

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Bettendorf Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: ($21/hr - $31.25/hr) Target Bonus: 5.0% Req ID: 27686 Summary Lincoln Electric Automation is seeking a Quality Technician for our Bettendorf, IA location to perform in-process and final inspections, maintain quality standards, and support continuous improvement within a fast-paced automation environment. This role ensures that assemblies, weldments, and tooling meet engineering and customer requirements. In addition to competitive pay, Lincoln Electric offers an annual bonus program, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, paid time off and many more outstanding benefits! Responsibilities Perform in-process and final inspections on assemblies, weldments, and fabricated components. Maintain and calibrate inspection and measuring equipment. Identify and document nonconformities; assist in corrective actions. Work with engineering and fabrication teams to resolve quality issues. Provide feedback to improve workflow, documentation, and process efficiency. Complete inspection reports and quality documentation. Support assembly, fit-up, hydraulic line plumbing, and customer run-off. Assist with field start-up and customer training as needed (overnight travel required). Maintain a clean, safe, and organized work area. Required Education & Experience High school diploma or GED required; technical training preferred. Proficient in reading blueprints and GD&T. Strong attention to detail and organizational skills. Proficient with Microsoft Office (Excel, Word, PowerPoint). Experience with CMM systems (Leica, Faro Arm) and PolyWorks preferred. Knowledge of manufacturing equipment, inspection tools, and procedures. Ability to operate forklifts and overhead cranes safely. Effective communication and teamwork skills. Physical Demands and Work Environment The physical demands and work environment characteristics described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing duties of job, employee is typically required to stand; walk; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; balance; stoop; bend; squat; climb; see, talk and hear. Be able to climb ladders; lift hand tools up to 40 lbs. consistently, and parts up to 50 lbs. consistently. Repetition with activity. Specific vision abilities required by the job include close vision, distance vision, depth perception and the ability to adjust focus. Work environment: The noise level in the work environment is usually moderate. Shift: Full time, Monday-Friday (7am-3:30pm), overtime as needed. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Location: Remote - Nebraska, Chicago, Columbus, Dallas, Fort Collins, Fort Loramie, Milwaukee, Remote - Kansas, Remote - Missouri, Remote - North Carolina, Remote - South Carolina Employment Status: Hourly Full-Time Function: Customer Experience Pay Grade and Range: USXX - Grade USXX Hourly 39 Min - $44,499 - Mid $63,570$44,499.55 - $82,642.03) Bonus Plan: 5%OIP Target Bonus: 5.0 Hiring Manager: Kevin Lattin Recruiter: Allison Schock Internal Candidate Eligibility Criteria: 1. Is a Lincoln Electric employee with at least 1 year of service 2. Is NOT on an active Performance Improvement Plan (PIP) Primary Function Responsible for providing field service and support including troubleshooting, repair, installation, maintenance, and training on various types of industrial automation equipment. Service & support activities will be performed both on-site at a customer's facility or in-house at a company owned location. Responsibilities Provide technical support, solve problems, testing, training, installs and maintenance. Deliver a consistent, positive, and exceptional customer service experience. Work environment may be individually focused or working with a team. Industrial troubleshooting in electrical, mechanical, PLC, HMI, robot programming, networks, and Fieldbus. Take initiative to meet challenging project timelines and budgets. Ability to travel as required (install, start-up, or field support) to successfully complete projects. Ability to support all aspects of equipment install (Rigging, alignment, wiring, startup, etc.) Complete all work related documentation on time. Identify potential future opportunities with the customer while onsite. Assist in any other activities that help to support ongoing strategies. Background Experience Machine Programming (PLC/HMI) experience preferred. Safety System, Network, and Fieldbus Programming and Trouble Shooting experience preferred. Experience in robotic processes preferred. Hydraulic/Pneumatic/Lubrication system troubleshooting experience preferred. Experience with in-field installation and start-up of intermediate to advanced level manufacturing equipment. Knowledge of system preventative maintenance on intermediate to advanced level manufacturing equipment. Ability to read and interpret electrical and mechanical prints. Robot Programming experience - Fanuc and ABB preferred. Basic knowledge of one of the following robotic processes: GMAW or Plasma cutting. Successfully complete start up and debug on basic to intermediate level system. Intermediate electrical troubleshooting skills. Record of positive customer feedback. Education, Training, and Experience Minimum requirement: High school diploma or GED (technical or vocational school preferred). Preferred: Associates degree focused in electrical, mechanical, mechatronics, or robotics. 4 or more years electrical troubleshooting experience preferred. Minimum five years of field service experience. Physical Demands While performing duties of job, employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk and hear. Repetition with activity; computer work. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment The work environment is inside manufacturing facilities. Proper person protective equipment (PPE) is required at all times while in manufacturing facilities. The noise level in the work environment is usually moderate. Location Candidates may reside in or near these locations: Dallas/Fort Worth, TX Chicago/Milwaukee North/South Carolina Kansas/Missouri Columbus, OH Fort Collins, CO Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Bettendorf Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: ($23 - $33) Target Bonus: 5.0% Req ID: 27343 Position Summary A Robotic Programmer works with the engineering and integration teams at Vizient by preparing automation systems to customer order specifications. This includes working with the customer on application or process development, programming structures and system functionality. Applications include, but are not limited to assembly, grinding, machine tending, material handling and welding. Job Responsibilities Take initiative to meet challenging project timelines and hour budgets; Take ownership of assigned tasks and projects to include commitment of travel for project success; Coordinate front-end reach reviews to ensure success of robotic application; Coordinate, implement and verify off-line programming efforts and online implementation of programming; Work with Controls Engineers and Application Engineers to ensure full functionality of the system; Assist in field start-up and customer training when necessary; Uphold company quality objectives and play an active role in reaching continuous improvement objectives; Installation and configuration of appropriate hardware and software options; Assist in the integration, start-up and debugging of plant floor equipment; Ability to improve cycle time and throughput by adjusting robot path or functions; Willingness to travel as required; and Perform miscellaneous job-related duties as assigned. Experience and Skills High attention to detail and quality; Ability to plan and execute daily and weekly scheduled tasks; Ability to keep work area clean and organized; Aptitude for providing directions to peers within the department; Excellent team player with organizational and time management skills; Safely operate fork trucks and overhead cranes; Ability to read and interpret weld symbols; Skill in the use of computers, specifically a PC, Windows-based operating environment; Ability to gather data, compile information and prepare reports; Ability to develop and deliver presentations; and Commitment to company values. Nonessential Skills and Experience Safety (OSHA, SDS), ANSI (RIA) standards; Microsoft Office Suite; Smartsheet Project Management Software; PTC Windchill with Creo, and Solidworks for viewing models; and Environmental, Health and Safety Understand the Company's EH&S Policy and how it relates to this job; Be aware of OSHA & EPA laws and regulations as well as company rules and policies that pertain to this job; Work in a safe and environmentally friendly manner and observe all company EH&S procedures; Immediately notify the supervisor if there is any safety hazard, any equipment not operating correctly or if there are any questions regarding EH&S procedures; and Attend required EH&S training. Physical Demands and Work Environment The physical demands and work environment characteristics described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing duties of job, the employee is typically required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; balance; stoop; bend; squat; climb; see, talk and hear. Be able to climb ladders; lift hand tools approx. 1-15 lbs. in weight to complete machine assembly, parts up to 50 lbs. Repetition with activity. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Work environment: The noise level in the work environment is usually low to moderate; temperature in the assembly area may fluctuate with the seasons as the production area is not air conditioned. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Pay Range: ($20 - $26) Target Bonus: 5.0% Location: Bettendorf Req ID: 27900 Position Summary Responsible for setting up and machining weldments, tubes, blocks, and pins of all sizes in a timely manner using 2-D drawings and programming an ACU-RITE controller, while maintaining exceptional quality. Job Responsibilities Set-up, program, and machine components per print efficiently and accurately Complete any necessary inspection worksheets Maintain little to no re-work or scrap Safely operate forklifts and overhead cranes Keep work area clean and organized Perform job-related duties as assigned per priority. Experience and Skills 1 - 3 years' experience as a machinist Prior experience setting up and operating manual mills preferred Basic PC navigation High attention to detail and quality Ability to read and interpret blue prints Understand basic GD&T call-outs Ability to accurately use standard machinist measuring tools Ability to setup and run “one-off” parts to print efficiently and accurately Must work well under pressure Excellent team player with organizational and time management skills Nonessential Skills and Experience Safety (OSHA, SDS), ANSI (RIA) standards. Environmental, Health and Safety Understand the Company's EH&S Policy and how it relates to this job; Be aware of OSHA & EPA laws and regulations as well as company rules and policies that pertain to this job; Work in a safe and environmentally friendly manner and observe all company EH&S procedures; Immediately notify the supervisor if there is any safety hazard, any equipment not operating correctly or if there are any questions regarding EH&S procedures; and Attend required EH&S training. Physical Demands and Work Environment The physical demands and work environment characteristics described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing duties of job, employee is typically required to stand; walk; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; balance; stoop; bend; squat; climb; see, talk and hear. Be able to climb ladders; lift hand tools up to 40 lbs. consistently, and parts up to 50 lbs. consistently. Repetition with activity. Work environment: The noise level in the work environment is usually moderate. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Schuyler, NE Job Type: Full Time Shift(s) Available: 3rd Compensation: $38.00/hr Benefits Information Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill Matching Contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Daily Engagement of workforce through direction of work assignments, compensation, communication, recognition, development and coaching, etc Manage the workflow process associated with electronics and some electromechanical areas of the facility, including the ASRS system Develop preventative maintenance procedures to maintain equipment associated with electronics and limited electromechanical equipment throughout the facility; including the management of parts inventory and corrective actions Manage safety culture through training and observations Liaison to contractors and Utilities department for projects and work orders Develop and update PLC and HMI programs as required based on established guidelines and controls for this type of equipment Ensure compliance of our measuring devices (i.e. Packers and Stockyards and Nebraska Department of Weights and Measures) Responsible for department budget, including labor and operating expenses Required Qualifications 2 year degree or better in electrical or electromechanical technologies or 3 years of experience with industrial process controls and industrial networking Competency in basic electrical 24 and 120 volt AC and DC circuits Basic knowledge of Windows XP/7 operating systems Ability to read, write and speak English Preferred Qualifications Experience in food processing environment Proficient in Allen-Bradley PLC Programming and troubleshooting, RsLogix 500/Control Logix 5000, Factory Talk View Install and trouble shoot Industrial Networks- Ethernet base and components Ability to read and interpret schematics, general machine installation and repairs Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

Shuttleworth & Ingersoll, PLC seeks an attorney with at least three years of law firm or equivalent experience to support the firm's business practice. Candidates should have a strong background in drafting and negotiating various types of business contracts and in handling a variety of types of business transactions. Candidates will also be expected to have general corporate law experience advising private companies on corporate governance matters and other general business matters. Candidates should possess excellent academic credentials, and have strong writing, analytical, organizational, leadership and communication skills. *Lateral Attorneys* Our lateral attorneys can expect to be challenged with a wide variety of sophisticated legal projects. As a collaborative firm, our attorneys find great satisfaction from being an extremely valuable part of a hardworking, close-knit team. We pride ourselves on having a positive, upbeat working environment for attorneys and staff. Our firm strongly encourages open communication between each of the partners and associates. We believe this open communication gives lateral attorneys a wonderful opportunity to learn from the many experienced attorneys at Shuttleworth & Ingersoll. Shuttleworth & Ingersoll, PLC is actively accepting inquiries from experienced attorneys (mid-level associates through partner level) looking to relocate and/or grow and expand their practice in a positive and collaborative legal atmosphere. With office locations in Cedar Rapids, Waterloo/Cedar Falls, and Iowa City/Coralville, Shuttleworth is deepening its presence across the state and welcomes applicants looking to practice primarily in the Cedar Valley, Cedar Rapids and Iowa City regions. As a full-service law firm, Shuttleworth provides lateral attorneys with the resources to serve all facets of their client's legal requirements, while also providing exceptional opportunities and structure for continued business development. To express interest, please contact Vince Geis or Brian Bergstrom. _All inquiries will be kept confidential._ *Vince Geis or Brian Bergstrom* 235 6th Street SE Cedar Rapids, Iowa 52401 Job Type: Full-time Benefits: * 401(k) * Dental insurance * Health insurance * Vision insurance Work Location: In person

Norfolk, NE Pay rate is $20 an hour. We are seeking a dependable Loader to support our Norfolk, NE operations. This role is not a driving position. The Loader will be responsible for checking in and breaking down bulk deliveries, verifying accuracy, and sorting products by route to ensure efficient and accurate loading for daily operations. The only equipment used in this role is a pallet jack. What You Will Be Doing Check in and break down bulk loads for multiple delivery routes Verify load accuracy against route and trailer reports Sort and stage products by route behind assigned trucks Count and inspect products for accuracy and quality Maintain accurate records and report shortages or overages Participate in cycle counts as needed Safely operate material handling equipment, including pallet jacks What We're Looking For Must be 21 years of age or older 1-3 years of shipping or warehouse experience preferred Ability to lift, push, pull, and carry up to 50 lbs Ability to stand, stoop, stack, and unstack items for extended periods Comfortable working in warm and cool environments Ability to communicate effectively in English Availability to work nights, weekends, and holidays Screening Requirements Pre-Employment Screening Requirements Must be able to pass E-Verify Must be able to pass a background check Benefits 401(k) eligibility after 12 months Medical benefits available after 90 days of full-time employment Equal Opportunity Employer We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other protected status.

Roles & Responsibilities: Play a critical role in the growth of our Engineering and/or Information Technology teams. Help build Talent Acquisition expertise through relationships, processes, and technology. Manage full cycle recruiting responsibilities for assigned requisitions. Collaborate with HR Business Partners and Leadership on recruiting strategy and to achieve company goals. Demonstrate success in hiring talent within critical Engineering and/or Information Technology functions. Contribute to teamwork and sharing knowledge inside the TA team and HR organization. Be innovative: Share your own ideas within the team to drive continuous improvement, examine each process and task with the goal of constantly providing increasing value to the customer. Own your job: Approach your daily work and customers with ethics, responsibility, discipline and ownership, knowing that everything you do has an impact on the customer, the company and your development. Define and build programs that address and support the business from a talent perspective, lead through a sales and consultative approach. Foster a data driven organization and leverage metrics/trends to drive results. Skills Required: 3+ years' full cycle recruitment on a regional or national level, preferably in a corporate environment Experience in high volume recruiting Experience recruiting on mechanical, electrical, and firmware engineers, project management and product management positions highly preferred Demonstrated ability to manage multiple hiring projects/initiatives simultaneously. Adept at setting and prioritizing your own work to perform the role successfully. Excellent communication skills with key stakeholders to create buy-in Ability to gather data, analyze and present findings to various audiences. Perform within a highly transformative, fast-paced growth environment

We want you to help us shape the future of shopping experiences and deliver on our purpose of connecting people with the products and experiences that enrich their lives. Joining Retail Odyssey, an Advantage Solutions company, means joining a network of 65,000 teammates serving 4,000+ brands and retail customers across 40+ countries. All the while, being provided the opportunities, support, and enrichment you need to grow your career. In this role, you will provide in-store merchandising support to Retailers to meet shoppers' needs. This includes building displays and end caps, resetting shelves with product rotation, and tracking inventory to ensure that stores and suppliers maximize sales opportunities. Are you ready to shape the future of shopping and get it done with us? What we offer: Competitive wages; $15.00 per hour Growth opportunities abound - We promote from within No prior experience is required as we provide training and team support to help you succeed Additional hours may be available upon request We offer benefits that can be customized to meet your family's needs, including medical, dental, vision, life insurance, supplemental voluntary plans, wellness programs, and access to discounts through Associate Perks Now, about you: Are comfortable interacting with customers and management in a friendly, enthusiastic, and outgoing manner You're 18 years or older Can perform physical work of moving, bending, standing and can lift up to 50 lbs. Have reliable transportation to and from work location Demonstrate excellent customer service and interpersonal skills with our clients, customers and team members Are a motivated self-starter with a strong bias for action and results Work independently, but also possess successful team building skills Have the ability to perform job duties with a safety-first mentality in a retail environment If this sounds like you, we can't wait to learn more about you. Apply Now!

General Description: Goldenrod Companies is currently accepting applications for an Information Systems Administrator in our Omaha, NE office. This position reports to the Controller and CFO. The financial compensation package is discretionary and will be determined between you and the CFO. Primary Job Functions: This person oversees the organization's technology systems to ensure they operate efficiently, securely, and in alignment with business goals. They function as the primary liaison for software applications, managing user access, troubleshooting issues, and optimizing workflows. They also implement solutions and improvements that enhance system performance and support the organization's overall business objectives. *Willing to pay for relocation** Required Tasks and Skills: Strategic Leadership & Technology Roadmap Develop and execute a comprehensive 3-5 year technology roadmap aligned with company growth objectives and real estate portfolio expansion Define system architecture standards and integration strategies across Yardi Voyager, financial systems, and third-party applications Lead technology selection, evaluation, and implementation for new modules, tools, and platforms Establish and monitor KPIs for system performance, user adoption, and operational efficiency Present quarterly technology updates to executive leadership, highlighting achievements, risks, and investment recommendations Yardi Platform Administration & Optimization Serve as the primary Yardi Voyager administrator and subject matter expert for all modules in use (Property Management, Accounting, Investment Management, Asset Management, etc.) Lead system upgrades, patch management, and testing protocols to ensure minimal disruption and maximum benefit realization Develop and maintain comprehensive system documentation, process workflows, and training materials Experience Level: Required - Bachelor's degree in Computer Science, Information Technology, or related field Yardi Voyager Certification, or relevant technology certifications (PMP, ITIL, etc.) strongly preferred Minimum 5 years of progressive experience with Yardi Voyager in a real estate environment (property management, investment management, or development) Experience in leadership or as a senior specialist role with responsibility for system administration, implementations, or major enhancement projects Ability to communicate effectively, both oral and written and ability to develop and sustain cooperative working relationships Demonstrated history of successful ability to manage large and complex consulting engagements About the Company: Goldenrod Companies (“Goldenrod” or the “Company”) is an active commercial real estate investor focusing on high quality, cash flowing assets in resilient United States markets. Goldenrod operates a series of closed-end commercial real estate funds focused on the acquisition and development of assets in the Central United States. Since 2006 Goldenrod has acquired or developed more than $2.4B of assets and currently has $1.25B AUM.

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Schuyler, NE Job Type: Full Time Shift(s) Available: 2nd Compensation: $31.50/hr Benefits Information Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill Matching Contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Assist in design of electrical projects and install electrical equipment Coordinate efforts with other workers involved in installing and maintaining equipment or components Consult with operators, supervisors, and engineers to plan layout of equipment and to resolve problems in system operation and maintenance Determine feasibility of using standardized equipment and develop specifications for equipment required to perform additional functions Work with voltage levels up to 480, 4160. Wire Variable Frequency Drive's Study blueprints, schematics, manuals, and other specifications to determine installation procedures Perform instrumentation calculation, set up of parameters and limits Modify industrial electronic devices, circuits, and equipment in order to meet available specifications Set up and test industrial equipment to ensure that it functions properly Perform scheduled preventive maintenance tasks, such as checking, cleaning, and repairing equipment, to detect and prevent problems before they occur Inspect components of industrial equipment for accurate assembly and installation and for defects such as loose connections and frayed wires Advise management on whether continued operation of equipment could be hazardous Maintain equipment logs that record performance problems, repairs, calibrations, and tests Examine work orders and converse with equipment operators to detect equipment problems and to ascertain whether mechanical or human errors contributed to the problems Operate equipment to demonstrate proper use and to analyze malfunctions Repair, install and adjust equipment, machines, and defective components, replacing worn parts such as gaskets and seals in watertight electrical equipment Install coaxial or fiber optic cable for computers and other telecommunications equipment Maintain inventory of spare parts. Send defective units to the manufacturer or to a specialized repair shop for repair When breakdowns occur, make necessary repairs as quickly as possible in order to minimize inconvenience Test faulty equipment to diagnose malfunctions, using test equipment and software, and applying knowledge of the functional operation of electronic units and systems Work extended shifts to support the facility which may require coming in early, before normal shift and staying over later than normal shift Short notice may be given when coming in early or staying over late. May be called in to make repairs on nights, weekends or holidays Be flexible and adapt to changing priorities Must follow the National Electric Code; comply with state and Cargill standards Assist plant with management of outside contracted electrical projects for quality to comply with Cargill specifications Participates in ongoing skill level improvement training and apply what is learned Performs all requested tasks professionally and in a reasonable time frame Is flexible and able to adapt to changing priorities Work indoors and outdoors in a plant environment Enter confined spaces under proper permit conditions and supervision Troubleshoot problems as required Maintain a safe and sanitary atmosphere Inspect buildings, grounds, and equipment utilized by facility; determine immediate and long range needs for maintenance and repair work Enter notifications utilizing maintenance computer program Understand and adhere to state and federal Occupational Safety and Health rules and regulations as related to plant safety Follow all Cargill safety rules and regulations, including use of proper PPE Complete all housekeeping assignments, work to improve the condition of the department, and work as a team member with a positive attitude Attend various mandatory safety and department meetings Communicate in a courteous and positive manner to accomplish duties effectively, working as a team with all involved Assist other plant personnel as needed and will perform any other duty as requested by the supervisor Required Qualifications Must be eligible to work in the united states without visa sponsorship Must be 18 years or older Must be able to perform physical job duties including bending/stooping, climbing ladders, and work in confined spaces Ability to lift a minimum of 50 pounds Must be able to work under special work conditions, such as extreme heat or cold Ability to work in elevated areas Must be able to operate machinery Must be able to read/write English High School diploma or Equivalent Basic computer skills including being able to enter and retrieve data Ability to work overtime Ability to work holidays, nights, weekends or different shifts Must be able to perform electrical maintenance trade Experience working with blueprints, schematics, manuals, and other specifications and the mathematical knowledge required for such work Must be able to operate mobile equipment Must have a high degree of mechanical aptitude Demonstrated ability to perform basic mathematical functions including addition, subtraction, multiplication, division and percentages Must be willing and able to work in inclement conditions and extreme temperatures Must be able to work in an outdoor, and indoor plant environment Must have very good time management skills with ability to prioritize tasks and work independently Install conduit and pull wire Have a strong commitment to safety Must have adequate transportation Craftspeople in this position will use multiple tools such as multi-meter; 500-to-1000-volt meg-ohm tester; voltmeter; ohmmeter; mobile equipment; safety equipment and PPE Preferred Qualifications Experience with wiring and programing Allen Bradley Programmable Logic Controllers Experience using electrical test equipment to perform analysis and troubleshooting Knowledge of the National Electric Code Mechanical aptitude to work from all types of blueprints, maintenance manuals, and drawings Apprentice, Journeyman or above license with the state of Nebraska or equivalent A 2-year degree in electromechanical, electrical system, or equivalent Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

Shift: various start times-various end times Hourly Rate: $31.95 an hour Conagra Brands is looking for a Utility HVAC Technician at our Fort Madison, IA Manufacturing Plant. The purpose of the position is to operate systems, provide technical support to maintain the system's performance reliability, basic operations and modify controls and systems to meet customer requests. You will work a continuous shift operation. Conagra Brands offers a starting wage of $31.95per hour, increasing to $33.96 per hour upon certification, with shift differentials of $0.45 for 2nd and $1.00 for 3rd. Conagra Brands offers overtime after 8 hours, 1.5x pay on your 6th day and 2x pay on your 7th day. You will report to the Senior Facilities Specialist and responsibilities include: Refrigeration systems (supporting the Process Safety Management Program on the plants ammonia refrigeration system), HVAC systems Compressed Air Systems Steam Boiler Systems Fire Protection Systems All other responsibilities outlined in skill block You have a minimum of: 3 or more years of experience OR an HVAC certification/diploma or completed apprenticeship program AND 1 year of HVAC field experience. Experience in team processes, interpersonal communications, team building, facilitation, and self-management skills. Must have the required Universal EPA certification for handling refrigerants RETA certification preferred. Ability to work 8 hour swing shifts with ability to cover up 16 hours during absences Conagra Brands in Fort Madison offers: Annual wage increases $175 monthly Company contribution to pension 3% Company match to 401(k); 100% immediately vested Blue Cross Blue Shield PPO starting at $27.69 per weekly payroll deduction Plus Dental, Vision, Life, STD and more! Apply online at careers.conagrabrands.com. Employment is contingent upon the successful completion of a background check and drug screen. Conagra Brands is an Equal Opportunity Employer Anticipated Close Date: January 23, 2026Location: Fort Madison, Iowa Our Benefits: We care about your total well-being and will support you with the following, subject to your location and role: Health: Medical, dental and vision insurance, company-paid life, accident and disability insurance Wealth: Great pay, 401(k)/pension eligibility, financial wellness programs and stock purchase plan Growth: Career development opportunities, employee resource groups and team collaboration Balance: Paid-time off and volunteer opportunities Our Company: At Conagra Brands, we have a rich heritage of making great food. We aspire to have the most impactful, energized and inclusive culture in food. As a member of our 18,000+ person team across 40+ locations, you are empowered to reach your potential, make an impact and own your career. We're in the business of building champions - within our people and our iconic brands like Birds Eye , Slim Jim and Reddi-Wip . Our focus on innovation extends beyond making great food, it also reflects our commitment to embracing new solutions that positively impact our team, the communities we serve and the health of our planet. Foodies Welcome. Conagra Brands is an equal opportunity employer and considers qualified applicants for employment without regard to sex, race, color, religion, ethnic or national origin, gender, sexual orientation, gender identity or expression, age, pregnancy, leave status, disability, veteran status, genetic information and/or any other characteristic or status protected by national, federal, state or local law. Reasonable accommodation may be made upon request.

River City Transport is hiring full-time CDL A OTR dry van pre-made team drivers nationwide. River City Transport is a family owned and operated asset-based provider with terminals in the Midwest and west coast. RCT is looking to add OTR and regional drivers in your market. With dedicated contracts for some of the largest shippers in North America, we would like you join our team! RCT offers a great company culture, driver pay, benefits and plenty of room for personal development with the opportunity to grow into future management roles.Compensation: Average annual pay range per driver: $90,000 - $120,000 70 - 75 CPM per driver based on experience and driving record Average weekly miles: 3,000+ All miles paid, loaded & unloaded Additional Pay: Breakdown Pay: $150 per day if no replacement unit is available Layover Pay: $150 Detention Pay: $25 per hour after 2 free hours Extra holiday pay: $150 incentive for driving on a holiday (9 holidays per year) Clean level 1 inspection report: $50 Bonuses: Referral bonus: $1,500 paid in increments over 1 year Quarterly Safety Bonus: $250 - $1,000 Safe driving (no accidents or infractions) 100% On time deliveries & pick ups Paid weekly via direct deposit Benefits & Perks: Great company benefits starting after 90 days: Medical, Dental, and Vision Insurance 401 (k) Retirement Program with company match Life Insurance Paid Time Off: After 1 year of service: 5 days After 3 years of service: 10 days After 5 years of service: 15 days Paid Orientation: Approximately 1 day paid $25 per hour Passenger program: Minimum of 16 years of age Pet friendly upon approval Take your truck home program Home Time, Route, & Schedule Home time: 1 day home for each week on the road Schedule: On the road 6 - 8 weeks at a time Route: Dedicated routes throughout the US Level of Touch: 100% No-touch freight, some drop & hook Equipment: 2022 - 2025 Freightliner & International Sleeper Trucks All trucks are automatic Amenities: Refrigerators, XM radio, new mattresses, heated & cooled seats Governed Speed: 73 mph on the foot, 75mph on cruise Outward cameras, event triggered ELD equipped using Samsara system Qualifications: Must be at least 23 years of age Must have CDL A license Must have a minimum of 2 year verifiable commercial tractor-trailer driving experience Must have or be willing to obtain hazmat endorsement River City will provide hazmat training & pay to obtain the endorsement No DUI's or felony driving convictions in the last 5 years No major violations in the last 3 years No more than 3 minor violations in the last 3 years Must meet Department of Transportation (DOT) testing and physical requirements and be knowledgeable of DOT regulations Must be able to pass a background check and required pre-employment drug screen Hiring Area: River City is hiring established teams nationwide

Based primarily in Omaha, Nebraska, Baker's merged with The Kroger Company in 2001. Today, we're proudly serving Baker's customers in 11 stores in Nebraska. As part of the Kroger family of companies, we take pride in bringing diverse teams with a passion for food and people together with one common purpose: To Feed the Human Spirit. With a history of innovation, we work tirelessly to create amazing experiences for our customers, communities AND each other, with food at the heart of it all. Here, people matter. That's why we strive to provide the ingredients you need to create your own recipe for success at work and in life. We help feed your future by providing the value and care you need to grow. If you're caring, purpose-driven and hungry to learn, your potential is unlimited. Whether you're seeking a part-time position or a new career path, we've got a fresh opportunity for you. Apply today to become part of our Baker's family! What you'll receive from us: The Kroger Family of Companies offers comprehensive benefits to support your Associate Well-Being, including Physical, Emotional, Financial and more. We'll help you thrive, with access to: A wide range of healthcare coverage, including affordable, comprehensive medical, dental, vision and prescription coverage, through company plans or collective bargaining agreement plans. Flexible scheduling in full- and part-time roles with paid time off, including holiday and sick pay based on eligibility and length of service. Emotional and financial support with free counseling through our Employee Assistance Program and free, confidential financial tools and coaching with Goldman Sachs Ayco. Valuable associate discounts on purchases, including food, travel, technology and so much more. Up to $21,000 in tuition reimbursement over your career, through our industry-leading Continuing Education program. Vast potential for growth, through an abundance of industry-leading training programs and diverse career pathways. For more information about benefits and eligibility, please visit our Benefits Page !

At Vertiv, we design, manufacture, and service mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. We are the trusted Service Provider for 70%+ of Fortune 500 companies, including industry-leading data centers and providers of colocation and cloud service. Why Vertiv is the best company for Field Service professionals: * Vertiv is an industry leader in Technology and Services with a best-in-class Customer Service and Safety culture * Company leaders have many years of hands-on Field Service experience in this industry and many others * Tremendous focus is placed on employee technical and leadership development * Technical Training takes place in our state-of-the-art Training Academy or Regional Training Center with a strong focus on immersive, hands-on learning * Competitive benefits include smartphone, laptop, personal protective equipment (PPE), other tools-of-the-trade, 401k with a company match & Generous PTO/Vacation Plan, Medical, Vision & Dental & more * Abundant technical resources including 24/7 Technical/Factory Support and technical online libraries of product documentation, work instructions, and self-help troubleshooting guides * Company-wide commitment to promoting a strong work/life balance * An employer-of-choice for Veterans with technical backgrounds The Site Leader will provide world class jobsite leadership for large, long-duration, high-profile projects for Vertiv power and/or thermal equipment. The Site Leader is the primary Vertiv Service on-site technical representative for large jobs, from construction start, through start-up, site acceptance testing, and project completion. The Site Leader is required to establish, grow and maintain excellent rapport with all customers, co-workers, sales representatives and others as appropriate. The Site Lead is required to work in tandem with the assigned Project Manager to drive cost controls, schedule adherence, resource management, and ultimately a positive customer experience. DUTIES & RESPONSIBILITIES: ROLE SUMMARY * Provide jobsite construction and technical leadership for large projects * Working knowledge of critical infrastructure equipment in data centers, including Vertiv-manufactured equipment * Leads a multi-disciplinary on-site team consisting of Project Leaders, Installers, Technicians, Customer Engineers, and subcontractors * Represents Vertiv at daily customer meetings and can speak to technical requirements for the day's schedule to coordinate activity with other parties on-site * Leads and supports start-up and site testing activities for assigned projects * Ensure sufficient manpower on-site each day to perform start-up and site testing work * Assist during start-up and site testing as necessary, depending upon man-power availability and site location * Provide daily status reports to Service Management, Project Management and sales rep TECHNICAL RESPONSIBILITIES * Keeps current on Vertiv equipment start-up and commissioning processes, procedures, and tools-of-the-trade * Keeps current on Safety Bulletins, Safety Field Change Notices, Field Change Notices, and Service Tips SAFETY RESPONSIBILITIES * Leads daily Vertiv toolbox talk, pre-job safety walk and inspection, and drives any necessary corrective/preventative actions required in a timely fashion * Responsible for the adherence and administration of all site and Vertiv Safety policies on job sites * Operates in a safe manner in accordance with published safety guidelines * Must wear appropriate PPE as per company guidelines and accordance with job duties * Adhere to work hours policy guidelines - "14 hours rule" * Report all work related accidents or injuries within 24 hours to the appropriate personnel * Must be a role model to fellow associates with regards to safety by setting a positive example * Lead by example with the use of STOP WORK Authority, Good Catch engagement, and timely closure of necessary corrective/preventative actions ADMINISTRATIVE RESPONSIBILITIES * Ensure adherence to Vertiv Warranty process in partnership with Project Manager * Provide accurate and timely reporting in accordance with published guidelines * Timecards, expense reports, mileage reports, SR/task closure, forms, et al. * Supports Project Manager with obtaining any necessary technical data so Project Manager can maintain project systems * Maintain company property according to company policies * Credit cards, PPE, test equipment, laptop, smartphone, et al. CUSTOMER SATISFACTION RESPONSIBILITIES * Provide proper and adequate communication to internal and external customers * Ensure daily alignment of customer expectations and Vertiv activity, and drive clarification/re-alignment if there appears to be misalignment of expectations * Maintain customer satisfaction rates according to company guidelines PERSONAL PERFORMANCE EXPECTATIONS * Make decisions based on the Fundamental 5 in order of importance: Safety, Quality, Timeliness, Cost, Productivity * Capable of making timely decisions, technical and commercial, under pressure * Maintain productive utilization rate according to company guidelines * Adhere to company dress code and safety regulations * Understand and comply with company startup/escalation process and procedures * In all aspects of job requirements, must lead by example, and conduct themselves aligned to Vertiv Behaviors * Ability to communicate with all levels within the organization -Managers, co-workers, Support Services, sales, electronic communications, et al. * Ability to handle stressful situations and provide a calming effect to customer * High level of diplomacy when interacting with internal and external customers QUALIFICATIONS: * Experience (one or more of the following) * ASEET or ASMET preferred * Equivalent industry experience, specifically leading and actively participating in start-up and commissioning of power and/or hvac equipment preferred * Six years military experience in a related field * Minimum 2 years of experience in Industrial construction management * Interpersonal Skills * Vertiv Behavior practitioner * Strong organizational skills * Independent operator * Strong verbal and written communication skills * Able to build and maintain trusting customer relationships * Collaborative and cooperative in high-stress environments * Able to communicate at all levels of an organization with a base level of executive presence * Able to quickly respond to changing customer priorities without disruption or resistance * Must be able to read and interpret electrical one-line diagrams and blueprints * In all aspects of the job, need to lead by example, and held to a higher standard of conduct * Product certifications up to date * Meet all aspects of the job description * Performance evaluation rating of meets all aspects of job requirement or better * Consistent performance and customer relation skills * Technical skills * Ability to make an immediate site evaluation, skills to include: environmental temperature, and general operating conditions without supervision * Ability to summarize and report all work related tasks performed * Independently evaluate, recognize and recommend acceptable customer solutions based upon site evaluation * Recommend and direct activities at a customer site by leading technical activities of other technicians * Provide on-site customer consultation with the assistance of Project Leader(s) * Capable of providing project leadership and on-site direction for assigned projects * Expert in COHE procedures * Expert in site acceptance testing procedures and equipment * Computer skills * Advanced word processing, report generation * Spreadsheet processing * Electronic mail * Test equipment and data analysis programs * Familiarity with computer networks * Mechanical aptitude WORKING CONDITIONS: * Job assignments will typically be long-term assignments ranging from 4 weeks to 12+ months duration based upon the scope and schedule of the project * If assigned a project not located in the vicinity of Site Leader residence, travel will consist of a field rotation that includes (3) consecutive weeks on the customer site followed by (1) week of a service break in their home office whereby the Site Leader is expected to work their minimum of 40 hours on billable tasks and any administrative duties (i.e. Safety training, cycle counts, etc.) as necessary * Jobsites consisting of industrial new construction (greens field) or retrofit construction (browns field) * Flexible schedules (weekends, evenings, and holidays) * Valid driver's license * Deployable in the event of emergencies PHYSICAL REQUIREMENTS: While performing duties of the above jobs, the associate is regularly required to stand, walk, use hands and fingers, handle or feel objects, tools or other components; reach with hands and arms; stoop, kneel, crouch, or crawl; talk, hear and smell. The associate frequently is required to sit and climb or balance. Specific vision abilities required by this job include close vision, distant vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Must be able to consistently lift up to 50 pounds and occasionally up to 75 pounds. Notes: Vertiv will make reasonable accommodations whenever necessary for all qualified employees or candidates with disabilities (as defined by applicable law), provided that (1) the individual is otherwise qualified to safely perform the essential functions of the job and (2) such accommodations due not impose an undue hardship. The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES * Customer Focus * Operational Excellence * High-Performance Culture * Innovation * Financial Strength OUR BEHAVIORS * Own It * Act With Urgency * Foster a Customer-First Mindset * Think Big and Execute * Lead by Example * Drive Continuous Improvement * Learn and Seek Out Development At Vertiv, we're on a mission to empower the people that will power the future. From a simple swipe to life-changing medicines, from push notifications to generative AI. We design, manufacture, and service the products and solutions that keep the world connected. With $6.9 billion in revenue, a strong customer base and global reach spanning nearly 70 countries, we are uniquely positioned to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to **********************. If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. #LI-HR1

The Project Manager (PM) is responsible for overseeing the planning, execution, and delivery of complex networking and Data Center (DC) projects across multiple client environments. This role oversees end-to-end material management, hardware forecasting, and program tracking for new data center builds and backbone projects, while also providing backfill support for retrofit programs as needed. The PM is responsible for strategic planning, cross-team collaboration, and ensuring that all technical and delivery aspects are executed on time, within scope, and aligned with client and organizational goals. Key Responsibilities Material Management & Hardware Forecasting Oversee material management across all DC build types Monitor and flag hardware shortages Prepare New Build schedules for DC regions and update milestone date shifts in appropriate trackers and tools Provide consumption signals during demand planning Hardware Sourcing & BOM Management Collaborate internally for hardware sourcing; review supply sheets and discuss shortages with relevant team members Communicate design discrepancies vs. master BOM changes to stakeholders; clarify master BOM requirements for each project Work with design creators for BOM understanding and flag hardware delivery risks to stakeholders Deployment, Prioritization & Escalation Analyze dependencies between projects; optimize/prioritize hardware deployment and flag shortages Work with the team ensure POs are accurate and prioritize gear delivery Refer all flagged issues to stakeholders Tracking, Analysis & Communication Analyze gear requirements for new builds; understand milestones and track milestone shifts Collaborate with the team for milestones and gear requirements Build & update trackers appropriately Facilitate transfer of hardware from central to local warehouses Lead/coordinate weekly meetings Review and update status decks in weekly syncs Respond to questions about delivery dates and risks Identify and flag risks & blockers Track chats and assist with programmatic updates Schedule and conduct lessons learned meetings Roadmap Development & Resource Allocation Vet and validate the roadmap with team Lead calls with all stakeholders for feedback Ensure roadmap coverage for all projects Ensure clear documentation of site/building nuances Continuous Improvement & Documentation Maintain documentation and trackers Analyze gear requirements based on specifications Coordinate and follow up with all necessary teams regarding material status Review tasks/comments for delivery confirmation and shortages Work with team to understand BOM finalizations and flag mismatches Lead inventory clean-up exercises and ensure process documentation is current Identify process inefficiencies and suggest improvements to project execution framework Support training and onboarding for new team members or subcontractors Required Qualifications Exceptional communication and stakeholder management skills Proven experience with vendor and logistics management Efficiency in cross-functional team coordination Strong analytical mindset and ability to manage multiple concurrent projects Proven track record of delivering complex solutions, while navigating a fast-paced environment with frequent shift in priorities Strong familiarity with tools such as G Sheets, Excel, Jira, Smartsheet, MS Project, or equivalent PM software Preferred Qualifications Understanding of colocation and edge computing architectures 5+ years of experience managing large-scale data center, network infrastructure, or field deployment projects Familiarity with SLA-driven managed services and handoff to NOC operations Experience with ITIL or PMP methodologies preferred Bachelor's degree in Computer Science, Engineering, or other related technical field Physical Demand & Work Environment: Must have the ability to perform office-related tasks which may include prolonged sitting or standing Must have the ability to move from place to place within an office environment Must be able to use a computer Must have the ability to communicate effectively Some positions may require occasional repetitive motion or movements of the wrists, hands, and/or fingers Salary Range $66,120.00 - $104,400.00 USD (Salary) Please note that the salary information provided herein is base pay only (gross); it does not include other forms of compensation which may or may not apply to this specific position, namely, performance-based bonuses, benefits-related payments, or other general incentives - none of which are guaranteed, may be subject to specific eligibility requirements, and are wholly within the discretion of Astreya to remit. Further, the salary information noted above is a range that consists of a minimum and maximum rate of pay for this specific position. Where an applicant or employee is placed on this range will depend and be contingent on objective, documented work-related considerations like education, experience, certifications, licenses, preferred qualifications, among other factors. Astreya offers comprehensive benefits to all Regular, Full-Time Employees, including: Medical provided through Cigna (PPO, HSA, EPO options) / Medical provided through Kaiser (HMO option only) for California employees only Dental provided through Cigna (DPPO & DHMO options) Nationwide Vision provided through VSP Flexible Spending Account for Health & Dependent Care Pre-Tax Account for Commuter Benefit/Parking & Transit (location-specific) Continuing Education and Professional Development via various integrated platforms, e.g. Udemy and Coursera Corporate Wellness Program Employee Assistance Program Wellness Days 401k Plan Basic Life, Accidental Life, Supplemental Life Insurance Short Term & Long Term Disability Critical Illness, Critical Hospital, and Voluntary Accident Insurance Tuition Reimbursement (available 6 months after start date, capped) Paid Time Off (accrued and prorated, maximum of 120 hours annually) Paid Holidays Any other statutory leaves, paid time, or other fringe benefits required under state and federal law

The Community Assistant (CA) is either a full-time or a part-time position and is an active member of a team providing services to individuals with disabilities who reside in the community. Full Circle Services, Inc strives to create a fun and enjoyable atmosphere to encourage client participation in programs. Full Circle Services, Inc ensures the well-being of Consumers and promotes their development to a more independent lifestyle. Education High school diploma or GED or enrolled in a High School and over age 16 Ability to maintain yearly training. (i.e., Mandatory Reporter, HIPPA, OSHA, etc.) Experience No experience needed. Preferred experience working with persons with disabilities and/or diverse cultures. Job Duties NOTE: The job duties listed are typical examples of the work performed by Community Assistants. Not all duties assigned to every position are included, nor is it expected that all positions will be assigned to every duty. Provides direct services to Consumers. This includes working a variety of hours (i.e., nights, weekends, holidays, etc). Aids Consumers in their own homes/program and in the community to allow them to function more safely and independently. Provides Consumers with a positive role model. Monitors Consumers' well-being. Assists Consumers with daily life skills and/or behavior management training. Assists Consumers with their individualized goals as set forth on their Individual Support Plan. Assists Consumers in attending appointments when necessary and may provide transportation. Implement Individual Support Plans consistently and according to strategies. Implement and document HCBS 20 Outcomes each shift of work. Maintain accurate documentation and billing records and/or verbal reports regarding Consumers' daily activities and progress. Ensures that all required documentation is complete and accurate. Submits timesheets to supervisor on time. Participate in the consumer's interdisciplinary team meeting. Recognizes potential emergency situations, analyzes situations accurately, and develops strategies to deal with such situations. Follow work schedule each day 100% of time with changes occurring only with supervisory approval. Follow work rules and work ethics. Report consumer problems and complaints in a timely manner outlined by your supervisor and company policies. Communicate effectively with consumers, family members, guardian(s), co-workers, and supervisor. Maintain positive relationships with other agencies. Always maintain confidentiality, releasing information to only persons with FCS INC. has acquired releases for. Answer phone and/or in-person inquiries and directs inquires to appropriate staff members if required. Responds to routine queries regarding the organization and services provided if assigned. Be cognizant of consumer's preferences, interests, needs, dreams, and strengths and ensure that consumer rights are protected. Complete General Event Reports (GER) within 24 hours of incident and immediately contact supervisor or on-call person. Attend monthly staff meetings/trainings or initiate communication with supervisor for follow-up. Identify, correct (if applicable), and report any safety concerns and crisis situations to appropriate personnel. Follow all safety procedures and attend safety training as assigned. Be proactive in diffusing situations by recognizing potential crisis situations, analyzes such situations accurately, develops strategies to deal with such situations, and informs the Supervisor and Manager when such incidents arise. Operates office equipment such as: personal computers, photocopiers, facsimile machines, printers and reports or arranges for equipment repairs. Performs related work as assigned. Required Job Skills * Work in a fast-paced environment * Have a valid driver's license, vehicle, and automobile insurance. It is the responsibility of the Worker to ensure that all requirements are met to provide safe transportation i.e. proper driver's license, brake check. * Have a phone. * Knowledge and understanding of confidentiality (HIPAA) * Understanding of the concept of enabling * Ability to have flexible weekly schedule, work overnights and sleep on a couch/cot. Because the work schedule may vary from day to day and week to week, the Community Assistant must be flexible and willing to work with the support team in meeting the needs of the consumer. * Ability to lift up to 30lbs. * In addition, the individuals must be reliable, dependable, and enthusiastic about performing a job to the best of their ability. They must give attention to their personal appearance and reflect a positive image in the community, and they must work diligently toward total community inclusion. * Provide support services in a way that relies on mutual respect between consumers and support staff. * Organize work, be good at solving problems, be a sound decision-maker, display good communication skills, and give careful attention to details. * Cooperate with team members to accomplish team and organizational goals, and be able to adjust to, and manage change. * Demonstrate a dedication to consumer empowerment by providing decision-making opportunities in all aspects of daily living.