Top Structural Design Engineer Skills

Below we've compiled a list of the most important skills for a Structural Design Engineer. We ranked the top skills based on the percentage of Structural Design Engineer resumes they appeared on. For example, 15.1% of Structural Design Engineer resumes contained Structural Analysis as a skill. Let's find out what skills a Structural Design Engineer actually needs in order to be successful in the workplace.

The six most common skills found on Structural Design Engineer resumes in 2020. Read below to see the full list.

1. Structural Analysis

high Demand
Here's how Structural Analysis is used in Structural Design Engineer jobs:
  • Constructed Finite Element models, performed structural analysis and process simulation to evaluate plastic part design and offered recommendations for optimization.
  • Optimized design configurations through trade studies, structural analysis, prepare technical proposals recommend approaches for problem areas.
  • Performed investigative structural analysis and checked reinforced concrete framing designs for adequacy and compliance of Codes.
  • Determined towers stability, analyzed foundations, and delivered written reports for tower Structural Analysis.
  • Performed building code checks, structural analysis and structural component design required for successful construction.
  • Perform thermal and structural analysis of nuclear steam generators and their associated internals.
  • Supervised two new structural engineers on the structural analysis and Project procedures.
  • Performed structural analysis and design using structural analysis and design software.
  • Offered technical solutions using structural analysis knowledge, codes and specifications.
  • Job Responsibility: Prepare structural analysis, design and specifications.
  • Provided structural analysis and design assessment of building structures.
  • Conducted structural analysis of residential and commercial buildings.
  • Performed computer aided structural analysis and design.
  • Provide structural analysis of existing structures.
  • Performed structural analysis and design for reinforced concrete structures, such as: low-rise residential buildings, water tanks and schools.
  • Performed structural analysis of various flood control structures for the USACE, including the design of sector gates and swing gates.
  • Assisted Structural Analysis lead with tasks associated with developing interface loads from suppliers' equipment for use in mechanical interface teams.
  • Perform structural analysis using hand calculations for the design of various railroad bridge steel, concrete, masonry and timber structures.
  • Bachelor of Civil Engineering with total 8+ years Expertise (3+ years in gulf) in Structural Analysis & Design
  • Completed Structural Analysis Training Course - Learned how to analyze different types of aircraft structures using margins of safety.

Show More

2. Catia

high Demand
Here's how Catia is used in Structural Design Engineer jobs:
  • Utilize Auto CAD, CATIA V5, design tool to perform design responsibilities for wiring and structure installation drawing, etc.
  • Used different engineering tools like IVT, CATIA and various MS applications to perform engineering studies and compile the information.
  • Utilized the GSD and DSE modules of CATIA V5 to create structural supports and Tessellate the Cloud of Points.
  • Modeled using CATIA 3,000-4,000 hrs, MS Office and pioneered use of ICAD/smart (artificial intelligence) design tools.
  • Use of CATIA V4 to design and analyze systems and structure related to the F-16 inlet for multiple configurations.
  • Design and detail fuselage structure for the forward upper lobe of the Next Generation 737 using CATIA version 4.
  • Created CATIA models from structural design specifications and integrated solid models into COMOK solid of FS-X aircraft models.
  • Crated and checked engineering drawing for release using CATIA V5, ENOVIA and PDM for Boeing 767-2C Wing.
  • Designed and released HMBD detail fittings with GD&T for large cargo door, using CATIA V5.
  • Designed and detailed stringers, shear ties, skin, lap and splice frame assemblies using CATIA V5.
  • Designed structural parts of the fuselage and stabilizer for M407 and M430 using CATIA V3 and CADAM.
  • Supported test specimen and prototype demonstrators for various fan cowl structures using FiberSIM ACEE and CATIA V5.
  • Performed LOFT Surfacing task s & created LOFT Surfaces from digital data points using CATIA V5.
  • Produced CATIA V5 drawings using the CATIA Assembly Design, Part design and drafting work benches.
  • Utilized advanced CATIA skills to create frames, stringers, skin panels, and floor structure.
  • Designed and released fully CATIA V5 MDB defined parts for pylon and strut using ENOVIA LCA.
  • Worked on design changes and the release of the detailed part CATIA models and 2D drawings.
  • Produced an illustrated Step by Step Checklist Training material for CATIA V5 Design & ENOVIA Attributes.
  • Modeled tube routing throughout aircraft; prepared drawings both detail and installation using CATIA V5.
  • Prepared layouts, prototype drawings, details, specifications and illustration drawings using CATIA V4.

Show More

3. Shop Drawings

high Demand
Here's how Shop Drawings is used in Structural Design Engineer jobs:
  • Checked design, vendor, and shop drawings, as well as working with architects and plant designers on design changes.
  • Performed construction support work including site visits, response to request for information (RFI) and review of shop drawings.
  • Project scheduling, customer co-ordination, input to drafting team, 3D model and shop drawings checking.
  • Checked and approved construction shop drawings including structural steel, joists and deck and concrete mix designs.
  • Used 3D design software to create models and shop drawings for in-house shop fabrication.
  • Designed the steel connections and review of structural steel & re-bar shop drawings.
  • Shop drawings and bar bending schedules preparation of bridges superstructures and sub structures.
  • Reviewed shop drawings and oversaw the construction process while solving in-field problems.
  • Reviewed and approved shop drawings during construction phase of the project.
  • Developed and review shop drawings, such as erection and details.
  • Prepared and interpreted blueprints, schematic drawings, and workshop drawings.
  • Work included review of shop drawings for steel and concrete structures.
  • Review shop drawings and coordinated with steel and concrete contractors.
  • Reviewed shop drawings and materials for compliance with construction documents.
  • Shop drawings, detailing and connections detail drawings created.
  • Review of shop drawings per Indian codes and specifications.
  • Review and respond to RFI's and shop drawings.
  • Shop Drawings for 2 medical colleges in KSA.
  • Supervised drafters in the completion of shop drawings.
  • Review and approved shop drawings.

Show More

4. Enovia

high Demand
Here's how Enovia is used in Structural Design Engineer jobs:
  • Utilized ENOVIA LCA system to create part manufacturing information and Bills of Material (BOM).
  • Created and released ENOVIA items for parts, assemblies, installations, and drawings.
  • Monitor engineering changes using Learjet's ENOVIA database.
  • Populated Enovia LCA configuration management database with design data for the evaluation and release or aircraft components and assemblies.
  • Generated Bill of Materials and associated documentation for design release using Enovia LCA.
  • Defined installation requirements on 2D drawings.Maintained product structure in ENOVIA.
  • Adapted changes to frames for 787-10 configuration Used the NRPD and ENOVIA LCA Release process to release Detailed Parts & Assemblies
  • Fuel Tank Design, Fuel Tank Support Structure for ERJ-145XR) utilizing 'ENOVIA'
  • Completed and released engine attach structure using Enovia VPM software.
  • Release packages involved details, assemblies in Enovia.
  • Create and release parts list using Enovia LCA.
  • Structured lavatories and galleys assemblies within Enovia.
  • Trained and certified in Enovia PDSuite.

Show More

5. Fuselage

high Demand
Here's how Fuselage is used in Structural Design Engineer jobs:
  • Developed an over-lap fastened interface of upper and lower fuselage skins to replace bonded configuration.
  • Performed structural component design/analysis as related to the F-16 aircraft center fuselage.
  • Created upper and lower fuselage skins and several bulkheads for fuel leak trade study - hat stiffened and bead stiffened options.
  • Led the team, including design, strength, tooling and manufacturing engineering on the F-18E/F forward fuselage initial design.
  • Propagate the ENOVIA V6 database with the OH-58 Kiowa Scout helicopter's fuselage installations, assemblies, and details.
  • Modified and released 50+ detailed parts on Fuselage structure to support customer and manufacturing needs on the shop floor.
  • Reviewed all fuselage structure models for effectiveness, accuracy, and compliance with system interfaces and program design standards.
  • Group Lead (under Steve R Gordon, Manager) supporting the fuselage and interior before joining Sec.49.
  • Coordinated with suppliers from different sections of the 767-2C fuselage from start to finish for sealing CG1 drawings.
  • Design details, assemblies and installations of aircraft structural fuselage and wing components for the E-2D.
  • Led four person team on center fuselage production tool investigation/corrective action group (~400 tools)
  • Provided supervision in actual weight and CG measurements of the Center Fuselage Final Assembly.
  • Bonded fuselage and wing assembly delivered in ten months from start of design.
  • Design, develop high endurance unmanned aircraft wing, fuselage and landing gear.
  • Analyzed fuselage skin panels for compression crippling and shear strength using classical methods.
  • Created air passage fastener pattern for entire Center Mid Fuselage Side Panel Assembly.
  • Completed side frame assembly and integration layouts for Boeing 747-8I fuselage structure.
  • Sheet metal, Fuselage skins, stringers and frames.
  • Created drawing for bay painting of forward fuselage.
  • Prepared MD-11 Fuselage Structures sustaining engineering and MRP.

Show More

Job type you want
Full Time
Part Time
Internship
Temporary

6. Autocad

high Demand
Here's how Autocad is used in Structural Design Engineer jobs:
  • Supervised preparation of structural drawings from preliminary check prints up to approved for construction drawings using AutoCAD.
  • Prepared structural framing plans of residential and commercial buildings from schematic layout utilizing AutoCAD.
  • Develop AutoLISP routines to enhance AutoCAD operations.
  • Developed structural drawings using AutoCAD.
  • Design, Detail, Estimate, and Project Management of Fall Protection Systems- AutoCAD 2011, Solid Works, Microsoft Office.
  • Use SmartPlant 3D, SmartSketch, MicroStation V8i, and AutoCAD 2014 for modeling, design, and drawing production.
  • Reviewed, edited, and produced foundation loads and AutoCAD drawings to be sent out to clients for review.
  • Detailed Construction drawing of RC buildings with Beam- column layout, elevation drawings and reinforcement detailing using AUTOCAD.
  • Use computer aided design (CAD) tools such as AutoCAD, and COSMOS finite element analysis software.
  • Assisted other drafters and designers troubleshoot difficulties with PDMS Draft, Design including AutoCAD programs.
  • Purchased and installed the computer aided drafting system (AutoCAD) for a six-employee office.
  • Managed group of highly skilled AutoCAD designers in commercial, residential and industrial projects.
  • Managed plan development by drafters and personal hands on, detailed use of AutoCAD.
  • Shared knowledge by training the facilities group in the use of AutoCAD.
  • Prepared structural detailing of column layout and foundation drawings using AUTOCAD.
  • Drafted plans for schools, hospitals and commercial buildings using AUTOCAD.
  • Developed drawings in AutoCAD to reflect engineering changes in drilling rigs.
  • Drafted existing structure for a large university project in AutoCAD.
  • Created structural plans, details and sections in AutoCAD.
  • Developed proficiency with AutoCAD R12.

Show More

7. CAD

high Demand
Here's how CAD is used in Structural Design Engineer jobs:
  • Developed design processes that more efficiently produce organized and highly accurate CAD models.
  • Provided advanced CAD capability for concept generation and validation of complicated mechanisms.
  • Use CAD to develop and maintain mechanical/structural engineering product definition.
  • Redesigned various composite/metal parts using CADAM.
  • Assisted Principal in fee estimation for proposed work, supervised work of junior engineers and CAD technicians, attended coordination meetings.
  • Use of CADAM for the design of new components as well as revisions to drawings on the MMB3 program.
  • Worked with CAD Technicians to develop full Structural Drawings of concrete, timber, steel, and masonry structures.
  • Performed layout and design changes necessary for testing of Army Apache Helicopter using CADD, Liaison and Customer Support.
  • Designed structural steel support system for the cranes and drew the layout & fabrication drawings using Auto-Cad R-14.
  • Developed FE model from 3-D CADD model, added all the required constraints to the FE model.
  • Generated drawings and information using ACAD, UG-Ideas, Rhino, VectorLam, and other design programs.
  • Mentor to fellow design engineers on design approach, procedures, processes, materials and CAD software.
  • Increased general knowledge base through workplace training in CAD, FEA, manufacturing, and Lean.
  • Designed composite nacelle skins, frames, cowls, access panels, cascades and blocker doors.
  • Establish CAD/CAM Data sets system for aircraft structure, with early PDM concept of Lockheed-Martin.
  • Review of CAD Drawings, Structural Drawings, Technical Reports and Calculations for Checking Purposes.
  • Delivered larger and more complex projects by training 7 engineers in use of CAD.
  • Design of sheet metal, machined and composite parts using CADD and UG v.9.
  • Reviewed & Updated CAD Drawings of previous systems to meet the new requirements.
  • Prepared & detailed quality drawings with Auto-CAD; Reviewed plans, and specifications.

Show More

8. ACI

high Demand
Here's how ACI is used in Structural Design Engineer jobs:
  • Perform field investigation and respond to emergencies to identify or verify deficient company facility structures and bridge structures.
  • Coordinated with customer and manufacturing facility to identify requirements, establish interfaces and ensure effective solutions.
  • Coordinated with the manufacturing and quality assurance personnel in order to facilitate product design.
  • Review available records and/or perform field investigations to determine the capacity of existing structures.
  • Coordinated requirements with interfacing design teams, including propulsion, avionics and controls.
  • Supervised construction crews & general foremen facilitating an empowered team work approach.
  • Utilized design software to analyze product capacities.
  • Designed fall protection structures for use in multiple applications, such as railways, trucking facilities, maintenance facilities and others.
  • Develop and maintain Excel application for the design of steel connections as well as capacity checks for nonstandard steel members.
  • Worked on a team to design process piping for Eagle Rock: Enrichment Facility; a uranium enrichment facility.
  • Repair Typhoon Damage Village - Design of different types of Training Facility building using 20 and 40 footer containers.8.
  • Provided civil and structural design for government project building, SIUE school facilities buildings, IDOT bridges and roadways.
  • Coordinated changes with interfacing systems groups, the factory, Liaison, stress, and manufacturing planning as needed.
  • Developed a Computer program in 'C' language to design a water tank for any given capacity.
  • Modified the 767 lower panel assembly to increase the cargo capacity to support the fuel tanks on board.
  • Performed 3-D modeling and structural analysis of a building - required to investigate removal of vertical bracing.
  • Performed a variety of design tasks for building design.o Westminster Canterbury 25,000 square foot Assisted Living Facility.
  • Project: Consolidated Rental Car facility (CONRAC), Nashville International Airport, Nashville, TN.
  • Concrete and steel Missile Maintenance Facility in San Diego - Coordinated the test cell blast design.
  • Analyzed existing structure capacity to its ability to handle additional loads at specific point loads.

Show More

9. Assembly Drawings

high Demand
Here's how Assembly Drawings is used in Structural Design Engineer jobs:
  • Coordinated with cross functional group to ensure all electrical brackets are properly located on crown frame assembly drawings.
  • Assisted in the development of a novel box-section main spar and created detailed interface and assembly drawings.
  • Created detailed drawings, assembly drawings, section views, section cuts, detailed views, BOM.
  • Completed frame splice layouts, assembly drawings and integration drawings for the Boeing 747-8F.
  • Created Detail, Installation, and assembly drawings by using UGII and IMAN.
  • Helped AES group with wire harness and equipment models and assembly drawings.
  • Revise 3D models updating details, sub-assembly and final assembly drawings.
  • Worked on C-17 wing flaps, detail and assembly drawings.
  • Produced detail and assembly drawings for the tail pressure bulkhead.
  • Create and release 3D MBD details and 2D assembly drawings.
  • Created various large and complex major assembly drawings.
  • Reorganized assembly drawings and released 168 drawings.
  • Created detail and assembly drawings for MMA/P8A.
  • Create 2D assembly drawings for production.
  • Produced detail and assembly drawings.
  • Assisted in drafting and revising of Specification Control Document for thermal barriers.Supported release of vendor assembly drawings and related qualification documents.
  • Digitized skin panel assembly drawings Resolved conflicts between original drawings and digital data with input from manufacturing.
  • Coordinated with manufacturing representatives to develop complex parts, weldments, and assembly drawings.

Show More

10. PDM

high Demand
Here's how PDM is used in Structural Design Engineer jobs:
  • Applied ITAR restrictions to design packages released within a PDM in support of the F-35 Program.
  • Used NRPD approval process; Released Module in PDM and ENOVIA LCA on time
  • Produced Automated Parts List with APLG for final PDM release.
  • Modified retrofit kits for F-16 program utilizing PDM.
  • Applied Team Center (PDM), 3DPDF and FT&A to create part lists and 3D drawings.
  • Used Team Center (PDM) to create assemblies and parts lists for the Boeing Part Release Process.
  • Create BTP (Built-To-Package) using PDM.
  • Use of PDM, VAS visual mock-up
  • Utilize Lockheed Martin Corporation PDM system for maintaining engineering design components and assemblies, for Productlifecycle management.
  • Populated Metaphase PDM configuration management database with Bill of Material and associated design data.
  • Aligned BOMs (Bill of Materials) with 3D model design changes prior to approval via PDM.
  • Released multiple beam assemblies in the Enovia/PDM data manager environment.
  • Use of K.B.E, PDM, EPIC and Dirrect.

Show More

11. Structural Components

high Demand
Here's how Structural Components is used in Structural Design Engineer jobs:
  • Resolved engineering and production problems associated with the manufacturing and assembly of aircraft primary structural components.
  • Performed modeling and structural simulations on various locomotives and freight cars structural components.
  • Created Assembly Requirements Models for structural components and their fasteners.
  • Performed design analysis and production layouts of primary structural components.
  • Designed new structural components to accommodate updated avionics system.
  • Supported production operations for installation and repair of structural components
  • Pre-Assembled Structural components in Nacelle area.
  • Implemented FEA in correlation with classical analysis methods to aid in the structural design and development of various major structural components.
  • Utilized V5 sheet metal, part, sketcher, assembly and FTNA modules to design various structural components for Bombardier Jets.
  • Designed and develop structural components constructed from carbon fiber, fiberglass, titanium and various different types of metal alloys.
  • Surface and solid modeling of complex fairings, fittings/machined parts, structural components and skin surfaces.
  • Perform repairs of structural system before and after the structural components were installed on site.
  • Design of civil and structural components related to water treatment and sewer treatment plants.
  • Designed and released Service Module primary structural components, installations, and assemblies.
  • Analyze and design structural components, gravity and lateral systems of building structures.
  • Created Assemblies within ENOVIA VPN for both structural components and standard parts.
  • Design Structural components of machined parts: Frames; Plates and splices.
  • Designed helicopter structural components using McAUTO UGII, 3-D CAD/CAM system.
  • Estimated scheduling and prepared layouts and PL of fuselage structural components.
  • Designed major structural components of the International Space Station.

Show More

12. Steel Structures

high Demand
Here's how Steel Structures is used in Structural Design Engineer jobs:
  • Analyzed existing timber and steel structures through field investigation and existing drawings and determined solutions for additional loading.
  • Designed steel structures for factory improvements.
  • Field supervision of construction activities for soil classification and foundations, steel structures, pipe, equipment and vessel supports.
  • Perform seismic, linear and nonlinear finite element analysis for both concrete and steel structures.
  • Type of Work: Structural Designer for concrete and steel structures.
  • Prepared complete design packages for various wood and steel structures.
  • Design of connections for light gauge steel structures.
  • Design steel structures in PDMS for contractor.
  • reinforced concrete & steel structures for industrial & commercial structures in compliance to design codes, e.g.
  • analyzed and designed commercial and residential RCC and steel structures by using various computer aided software.

Show More

13. Finite Element Analysis

high Demand
Here's how Finite Element Analysis is used in Structural Design Engineer jobs:
  • Evaluated Stresses on aircraft structures using classical methods and finite element analysis.
  • Prepared wing stress certification report for the Cessna Citation VII using Citation III test data and data from finite element analysis.
  • Utilize Finite Element Analysis Software to identify strong and weak points to improve structural integrity and reduce production waste.
  • Conducted strength analysis, finite element analysis (CGSA and PATRAN).
  • Performed Finite Element Analysis and Fatigue checks on critical connections.
  • Worked at submarine building site and directed 5 mechanical engineers performing finite element analysis of propulsor subjected to underwater shock.
  • Accomplished Finite Element Analysis using ANSYS Workbench software to determine whether the wind turbine blades and shaft would structurally fail.

Show More

14. Aisc

high Demand
Here's how Aisc is used in Structural Design Engineer jobs:
  • Utilize ACI Codes, ASCE 7, AISC Steel Construction Manual, and other industry codes and standards to complete designs.
  • Attended AISC Frame, Buckling Restraint System, Seismic seminars, RISA 3D, and RISAFLOOR steel seminars.
  • Consulted in design and construction of many steel and concrete structures using AISC and ACI Specifications
  • Conducted AISC stress checks to design 3-plate and hot rolled steel members for applied loading.
  • Qualified structural members, welds & bolted connections adhering to AISC-N690 & AWSD1.1/AWSD1.6.
  • Use of design codes such as ASCE 7, IBC, AISC, and NDS on a regular basis.
  • Applied AISC code with ASD method.

Show More

15. Installation Drawings

average Demand
Here's how Installation Drawings is used in Structural Design Engineer jobs:
  • Provided sealing/corrosion layouts for installation drawings.
  • Flap and Flap Support Structure: Responsible for flap track and flap track attach fitting design, detail and installation drawings.
  • Create layouts and detail, assembly, and installation drawings for the 747-910K program using CATIA version 4.2.2 and PDM.
  • Create fuselage layouts and detail, assembly, and installation drawings for the 737-900 passenger jet program using CATIA
  • Prepare detail, assembly, and installation drawings for A340 & A380 passenger jet programs using CADDS5 and CATIA
  • Performed design layout and created Solid modules, detail, assembly and installation drawings for V-22 Aircraft.
  • Created and released detail, assembly and installation drawings for the avionic rack using CATIA V5.
  • Created structural design layouts using CATIA V4 and released detail, assembly, and installation drawings.
  • Created PDR, CDR presentation, detail and installation drawings by using UGII and IMAN.
  • Produced layout using CATIA V5 & ENOVIA and PDM Released Module Designs and Installation Drawings.
  • Incorporate engineering changes to detail, assembly and installation drawings using CATIA V4.
  • Created wire anchor right hand symmetric installation models and wire anchor installation drawings.
  • Created Detail and Installation drawings using UGII, IMAN and engineering drawing schedules.
  • Provided details, assembly and installation drawings for MMA raked wing tip.
  • Created PDR, CDR presentations, detail and installation drawings.
  • Create installation drawings for the aircraft's fuselage installation.
  • Detail drafting and assembly/installation drawings (drafting).
  • Created Detail and Installation drawings by using CADD.
  • Created detail, assembly and installation drawings.
  • Created Interface Coordination Drawing (ICD), Detail, Assembly, and Installation drawings by Using CADD.

Show More

16. GD

average Demand
Here's how GD is used in Structural Design Engineer jobs:
  • Designed Wing Spoilers, Specific areas included Spars, Cores, Panels, GD&T and weight savings.
  • Designed Wing Inboard & Outboard Aileron, areas included Panels, GD&T and weight savings.
  • Side frames - Pickle forks - Rear Spar joint (wing -body joints), GD&T applications.
  • Lead the GD&T Validation & Release project on the CH-47 Chinook.
  • Applied GD&T, ANSI/ASME Y14.5, and fundamental engineering math.
  • Created drawings with (GD&T).
  • Control and apply GD&T.

Show More

17. Secondary Structures

average Demand
Here's how Secondary Structures is used in Structural Design Engineer jobs:
  • Evaluated relevant mechanical component design and integration of secondary structures, enhancing areas of potential development and optimization in installation procedures.
  • Created composite lay-up of primary and secondary structures utilizing the CPD (Composite Part Design) workbench.
  • Created structure designs for primary and secondary structures, floor systems, stairways, and mechanical systems.
  • Prepared production detailed drawings for S1 Truss Segment and Propulsion Module secondary structures.
  • designed primary and secondary structures, designed modifications on the ARH/417 program.
  • designed primary and secondary structures, pylons for the 747-8.
  • Performed detail designs and stress analysis of primary and secondary structures on the Gulfstream GIV- X and G-V aircrafts.

Show More

18. Architects

average Demand
Here's how Architects is used in Structural Design Engineer jobs:
  • Worked integrally with architects, engineering consultants, contractors, private owners, and state/municipal officials.
  • Coordinated with architects, engineers and other technical disciplines.
  • Coordinate with architects, contractors and home owners to provide engineering services from the start to finish of the project.
  • Collaborate with Scenic Architects to integrate the mechanical designs after engaging in model reviews to discuss the requirements of projects.
  • Provide operations expertise to enhance client relations between builder, sales, architects, engineers and inspection department.
  • Worked closely with architects and civil engineers to produce the aesthetic and appropriate siting specified for each station.
  • Interfaced with architects, other engineering disciplines and clients in the preparation of structural plans.
  • Consulted and worked with Architects and Contractors to come up with efficient solutions for Projects.
  • Participate in daily/weekly project meetings with architects, engineers, contractors, etc.
  • Coordinated drawings with Architects, Civil, Mechanical and Electrical Engineers.
  • Established liaison with architects and engineers of record.
  • Assist the Scenic Architects with drawings/models as needed.
  • Partnered with Architects and Contractors.
  • Selected Achievement Reduced construction costs and met all project timelines by building relationships with Architects and Contractors.
  • Resolved project issues on a daily basis in conjunction with associate engineers, architects and construction managers.
  • Coordinate with architects, engineers, clients and conduct site visits and providerecommendations and solutions during construction.5.

Show More

19. Pipe Supports

average Demand
Here's how Pipe Supports is used in Structural Design Engineer jobs:
  • Design of base plates, anchor bolts & connections for pipe supports.
  • Design of Piperacks, Industrial Plant Buildings, Tank farm, Pipe supports, Pipe Bridges, Hospital Buildings.
  • Assisted in the structural design of 450 large pipe supports, including pipebridges, steel and foundations design.
  • Design of pipe supports for Plant # 15 at Ras Tanura Refinery for S.ARAMCO.
  • Analyzed existing structural loading conditions for added loading created by additional equipment and pipe supports.
  • Proposed necessary retrofit of existing pipe supports to support additional loads as required.

Show More

20. Stress Analysis

average Demand
Here's how Stress Analysis is used in Structural Design Engineer jobs:
  • Performed hand calculation for stress analysis.
  • Prepared stress analysis reports for approval from outside DER's to obtain 8110-3's for field approvals.
  • Participated in On Machine Stress Analysis tests done on pilot builds to validate the design concepts.
  • Performed pipe stress analysis of the UF6 feed system aluminum piping using AutoPIPE software.
  • Completed the Boeing training series for static stress analysis of aircraft structure.
  • Stress analysis of the designed structures is carried out using ANSYS.
  • Performed stress analysis in support of the structural development.
  • Gas turbine engines mechanical design and stress analysis.
  • Collaborated with Structures Stress Analysis for final designs.
  • Stress analysis of transportation and lifting tools.
  • Acquainted with NASTRAN/PATRAN stress analysis programs.
  • Re-designed M1A2 Abrams Main Battle Tank hull to accept alternate engine/transmission powerpack and performed stress analysis.

Show More

21. Staad

average Demand
Here's how Staad is used in Structural Design Engineer jobs:
  • Designed concrete steel & masonry structures using analysis and design tools such as STAAD3, STRESS and PCA-ADOSS.
  • Used Computer tools including STAAD and SAP in designing various reinforced cement concrete (RCC) components.
  • Gained new experience in using STAAD Pro V8i, Mat 3D, and SmartPlant 3D software.
  • Reviewed and value engineered the 50,000 Gallons elevated steel water tank using STAAD Pro.
  • Used Software in Civil Engineering Structures as DAST, STAADIII.
  • Developed preliminary bridge design, prepared Structural Justification Report, and developed structural analysis models in Staad Pro.
  • Design was modeled in STAAD.Pro and consisted of an enclosed building with elevated truck lanes.
  • Design of supporting structures using STAAD-Pro Design of foundations for various types of structures.
  • Design with SAP90, Staad II and analysis of mass and earthquake.
  • Utilized STAAD.Pro 3-D software for the analysis of the structure.
  • Modelled the structure using STAAD Pro.
  • Used STAAD to analyze and design rehabilitation measures for concrete arched bridge built in 1880's.
  • Enriched my experience in using STAAD Pro V8i and Navisworks 3D Model software.

Show More

22. Design Calculations

average Demand
Here's how Design Calculations is used in Structural Design Engineer jobs:
  • Prepared design calculations, design reports and collected and organized data for transportation planning and highway alignment.
  • Assisted project manager with design calculations and developed construction documents for low-rise commercial buildings.
  • Reviewed and checked design calculations, estimates, and specifications produced by other engineers.
  • Prepared structural design calculations and checks structural plans for residential and commercial buildings.
  • Focused on preparation and verification of design calculations.
  • Performed design calculations on several bridge replacement projects on the Ohio Turnpike.
  • Perform structural design calculations for steel, concrete and masonry structures.
  • Steel framing analysis and beam design calculations for SO2 scrubber building.
  • Provided design calculations for structural steel, conventionally reinforced and post-tensioned concrete structures.
  • Design calculations, interaction diagrams and drawings for various sizes) FRP Composite Bar Reinforcement Bending Diagram Design Standard Development.
  • Design calculations, interaction diagrams and drawings for various sizes) FRP Composite Pre-stressed Sheet Pile Design Standard Development.

Show More

23. Engineering Support

average Demand
Here's how Engineering Support is used in Structural Design Engineer jobs:
  • Provided structural engineering support and reviewed LOR of several projects and provided recommendation to TRC members.
  • Provided engineering support under tight deadlines to effectively solve in-field problems, minimizing costly machine shutdowns.
  • Provided structural engineering support to field engineers and guidance to junior engineers and trained new engineers.
  • GermanyProvided engineering support in the design, development, assembly, review and installation of structure.
  • Provided engineering support to the manufacturing team during the build process of parts and assemblies.
  • Provided engineering support for machined fittings, brackets, composite panels and fairings.
  • Provided Structural engineering supports for 777 Programs, and 737-X Section 41 structures.
  • Provided engineering support to the St. Augustine Manufacturing Center (SAMC)
  • Provide structural engineering support on long-term and short-term projects.
  • Provided design engineering support for the Airborne Laser Program.
  • Provided engineering support to shop floor and suppliers.
  • Led design engineering support to the Automatic Fiber Placement team to integrate design for manufacturability into the pressure vessel test article.
  • Provided design engineering support for engine mounted systems hardware.
  • Provided engineering support and helped the shop mechanics to assemble and install many different assemblies around the aircraft.
  • Provide engineering support for Goodrich Aerostructures Integration Services at Boeing Field.

Show More

24. Aerospace

average Demand
Here's how Aerospace is used in Structural Design Engineer jobs:
  • Formulate conceptual design of aeronautical, aerospace products or systems to meet customer requirements and communicate feed back to design engineers.
  • Formulated conceptual design of aerospace components and systems.
  • Stored standard isometric windows for subsequent captures to be used in PowerPoint presentation to UTC Aerospace Systems.
  • Generated and analyzed data for integration of aerospace structural assemblies using spatial checks and DMU tools.
  • Design and analysis of critical components for a large optics composite aerospace support structure.
  • Designed spacecraft component installations and multi-layer insulation blankets for OrbitalExpress Autonomous Satellite in coordination with Ball Aerospace.
  • Design and modify parts in the 787 wings and side of body ribs - Aerospace sheet metal, Advance surface design.

Show More

25. Support Structures

average Demand
Here's how Support Structures is used in Structural Design Engineer jobs:
  • Designed equipment support structures & improved manufacturing & installations.
  • Designed various sign support structures for interstate/highway projects.
  • Designed countless galvanized steel equipment support structures using structural shapes and 4-, 8-, and 12-sided tubes.
  • Performed 3-D modeling and structural analysis and design of bridge mounted sign support structures.
  • Provided assistance with investigating any U/G utilities that might interfere with support structures.
  • Designed various support structures for the System Integration Lab (SIL).
  • Designed foundations for sign support structures including spread footings and drilled piers.
  • Support Structures for JPL in Pasadena.
  • Design of module support structures.
  • Performed Trade Studies for locations and support structures of onboard loose equipments.

Show More

26. Trade Studies

average Demand
Here's how Trade Studies is used in Structural Design Engineer jobs:
  • Perform trade studies and cost benefit analyses for automated manufacturing processes and equipment.
  • Conducted trade studies to reduce cost and weight by investigating various material alternatives, monolithic designs, and manufacturing processes.
  • Evaluated designs and performed trade studies for performance, structural adequacy, cost effectiveness, and regulatory compliance.
  • Evaluated design, perform trade studies and corrected engineering errors to comply with company and regulatory standards.
  • Produced trade studies, reports and recommendations of alternative design concepts for commercial airplanes conceptual design.
  • Performed trade studies of non-metallic materials to select best candidates for use in composite bracket design.
  • Performed Trade Studies of Payload Bay Routing Supports for Propulsion, Avionics, and TCS.
  • Conducted trade studies with different joint types and materials in design optimization exercises.
  • Performed packaging and design Trade Studies to reduce cost/schedule.
  • Conducted trade studies of various fan cowl designs.
  • Participated in weight trade studies and affordability studies.
  • Conducted trade studies for alternative designs.
  • Provided support for Trade Studies.
  • Improved design and installation process for cost reduction by preparing trade studies for the Affordability Information Management System (AIMS).
  • Contract Engineer) Design and coordination of aft tension bolt mating concept, and involvement in related weight savings trade studies.
  • Contributed to Boeing Partners FHI/KAI in Trade Studies during 787-9 pre-production up to firm configuration.

Show More

27. Structural Engineer

average Demand
Here's how Structural Engineer is used in Structural Design Engineer jobs:
  • Selected the structural support system of numerous structural engineering projects, including industrial, residential, commercial and institutional buildings.
  • Coordinate structural engineering projects as Project Lead to promote on-time and within budget completion; responsibilities included research and documentation.
  • Coordinated, created and implemented electrical installation and structural engineering changes for 787 commercial aircraft flight deck console projects.
  • Acted as structural engineering liaison for engineering companies involved in review and/or approval of system designs.
  • Lead and supporting structural engineering roles in ongoing permanent plant modification projects.
  • Develop and maintain mechanical/structural engineering product definition, to meet customer requirements.
  • Assisted Structural Engineering Team Leader with project management and coordination.
  • Worked as Structural engineer in design for Refinery/ Petrochemicals.
  • Coordinate structural engineering with other engineering disciplines.
  • Created structural engineering department for company.
  • Provided structural engineering design and analysis.
  • Lead Structural Engineer for a Plutonium packaging project that would receive a site wide bonus for the successful completion of the project
  • Developed and coded programs for solution of various civil and structural engineering design problems; job costing and billing program.
  • Work directly with the chief structural engineer in the design, maintenance and repair of all Metro-North railroad bridges.
  • Lead Civil and Structural Engineering duties and Engineer of Record for multiple simple cycle gas turbine projects.
  • Coordinated with Water Systems group and planned the Structural Engineering changes for a new drain installation.
  • Experience in structural engineering design in oil rigs, rig walkers, and connection parts.
  • Performed tasks of a Structural Engineer through planning, design and construction administration.
  • Carry out peer reviews of other structural engineers drawings/design briefs.
  • Assist in structural engineering building design and drafting.

Show More

28. Teamcenter

average Demand
Here's how Teamcenter is used in Structural Design Engineer jobs:
  • Designed conceptual cockpit structural layouts involving internal joints and assembly mates to cost and manufacturing using NX10 and TeamCenter.
  • Assigned to Boeing 787 project to collect models from TeamCenter for stress group.
  • Ensured item revisions are complete on Teamcenter with all specification documents such as CAD files, analysis reports and test reports.
  • Released test drawings and documentation in Teamcenter/Metaphase.
  • Devised product datasets for component assemblies and installations, from concept layouts to final development using the Teamcenter release process.
  • Developed part lists, Bill of Materials (BOM) and incorporated them into Product Lifecycle Management software Teamcenter.
  • Created drawings and models in UGNX with Teamcenter and Enovia PDM system as a Contract Engineer.
  • Develop product datasets for component assemblies and installations from concept layouts through Teamcenter release.

Show More

29. Asce

average Demand
Here's how Asce is used in Structural Design Engineer jobs:
  • Designed transmission poles for California department of Water Resources which involved extensive seismic analysis using ASCE48-05 code.
  • Calculated Gravity and Lateral loads following ASCE-10 specifics.
  • Provide ASCE 41 Tier 1 and 2 assessments for the seismic retrofit of existing structures.
  • Obtain the design loads required referring from the ASCE 7 design code.
  • Project was based on AASHTO and ASCE Specifications.
  • Designed structures, withstand minimum wind pressure in accordance with ASCE7-05, such as canopies, storefront members and connections.

Show More

30. FAA

low Demand
Here's how FAA is used in Structural Design Engineer jobs:
  • Conducted various trade studies in preparation of FAA certification for a derivative of the Predator Unmanned Aerial Vehicle.
  • Coordinate with Structural DER to obtain documentation (8110-3) to be submitted to the FAA.
  • Issue paperwork to the FAA for flight airworthiness of any structural changes to the aircraft.
  • Created structural substantiation reports for repairs, major alterations and FAA STC approvals.
  • Developed aviation repair schemes and structural substantiations under direction of an FAA DER.
  • Provided FAA determinations for major and minor changes to the airplane.
  • Assist in completing STC package for final FAA approval.
  • Designed, analyzed structure suitable for FAA approval.
  • Coordinated with the FAA regarding structural analysis and test as well as design compliance with Federal Aviation Requirements (FARs).
  • Updated compliance with FAA requirements and advanced the new design using Non-Recurring Product Development (NRPD) practices.
  • Produced and updated planning needs for all manufacturing and FAA needed requirement( liaison).
  • Verified drawings met corporate standards, FAA requirements and maintained GD&Tstandardization.

Show More

31. Freighter

low Demand
Here's how Freighter is used in Structural Design Engineer jobs:
  • Performed sustaining engineering for the 747 passenger-to-freighter conversions.
  • Assisted project engineer in redefining the Main Cargo Door and surrounding structures for converting Passenger aircraft into Freighter aircraft for 757-200.
  • Led 15-20 member team for the B747-200/-300 passenger to freighter mod & conversion program.
  • Joined a Sustaining Engineering team, designing structural assemblies for 747-8 Intercontinental and Freighter.
  • Worked on 737 special freighter conversions for Israel Aircraft Industries Ltd. (IAI).
  • Contract Engineer) Layout and design of modified structural frames in the 46 Section of the 747-8 Freighter version.
  • Provided shipside engineering support for the 747 passenger to freighter conversion program.

Show More

32. Design Documents

low Demand
Here's how Design Documents is used in Structural Design Engineer jobs:
  • Prepared design documents and calculation packages for building department submittal.
  • Reviewed and approved manufacturers and sub-contractors design specifications, drawings, design documents and prepared comments and recommendations.
  • Reviewed design documents by other disciplines and prepared comments and recommendations to fit project specifications.
  • Supervised civil structural design process, construction works, specifications and design documents.
  • Review design documents and specifications prepared by other consultants.
  • Performed Inter-Departmental Review of several design documents for structural and seismic qualification.

Show More

33. Design Changes

low Demand
Here's how Design Changes is used in Structural Design Engineer jobs:
  • Implement design improvements by simplifying engineering and part complexity, including restructuring the drawing tree to eliminate superfluous design changes.
  • Revised calculation documents to reflect design changes.
  • Communicate impacts to suppliers, customer, support groups, and coordinating the required design changes to make the design workable.
  • Extended usage of automatic riveting machines to 60% through design changes and minimized human errors in production.
  • Participated in implementing various design changes on the G-IV some of which included antenna, and fairings.
  • Discussed with Tech lead on day to day basis to explain the design Changes and Results.
  • Proposed design changes to achieve weight savings, design improvements and BOM reduction.
  • Issue and coordinate on design changes including Equivalency Change Package.
  • Interfaced with suppliers and customer regarding design changes.

Show More

34. Payload

low Demand
Here's how Payload is used in Structural Design Engineer jobs:
  • Developed buckling analysis spread sheet for preliminary sizing of conical composite laminate payload adapters.
  • Developed, maintained and modified basic structural and interior payload system and component designs.
  • Assisted in the development, integration and documentation of structural and interior payload system requirements for the Boeing 787 airliner.
  • Developed concept through production release wingtip payload fairings and support structure for BQM -177 Super Sonic Aerial Target.
  • Develop, integrate, and document payload system requirements to establish the systems design.
  • Supported qualification testing of Delta IV Payload Adapters and Composite Fairings.
  • Contract Design Engineer assigned to Payload & Structural Group.
  • Coordinated systems and payload structural interface for 777 41-section.
  • Lead Structural and Payload Design Engineer

Show More

35. MBD

low Demand
Here's how MBD is used in Structural Design Engineer jobs:
  • Applied MBD (Model Based Definition) principles in designing components and assemblies of Boeing CH-47 Chinook and V-22 Osprey.
  • Performed engineering and DMU check of structure parts (FTA, MBD, interference and material check).
  • Nose wheel well (NWW) Insulation blanket MBD and IRM model designed and released, 787-9.
  • Supported other team members on their model based definitions (MBD) and complex assembly releases.
  • Perform peer quality checks of MBD's and drawing sheets before delivering to customer.
  • Created 3D Modeling and MBD for End Fittings for Spoilers.
  • Created internal and external ICD s. Created MBD release schedule.
  • Created MBD drawing per ASME Y14.5 1994 and ASME Y14.41-2003 standards.
  • Detail and ARM MBD release.
  • Revised detail and assembly MBDs to support manufacturing and certification.
  • Create 3D MBD details for the ribs, intercostals, rear spar fitting and fairing support fittings.
  • Supported 787 mid-body systems integration by investigating problem reports and Orphan MBDs.

Show More

36. IPT

low Demand
Here's how IPT is used in Structural Design Engineer jobs:
  • Performed FEA stress analyses of composite laminate structures; implemented parametric scripting for design optimization.
  • Job description: Structural calculations and analysis.
  • JOB DESCRIPTION Preparation of structural analysis and design calculation, the main requirements of the issuance of the building permit.
  • Coordinated the design concepts and interacted with all the relevant disciplines within IPT teams and project engineers to optimize design.
  • Coordinated the design concepts and interacted with all the relevant disciplines within IPT teams to ensure efficiency in design.
  • Interfaced with IPT members, BF Goodrich and other suppliers, vendors to establish a firm configuration.
  • Develop working drawings from sketches or descriptions developed by Engineers.
  • Coordinated design concepts with all relevant disciplines within IPT teams.
  • Detailed experience description prior to 2003 available upon request.
  • Coordinated design with project engineer and other IPT teams.
  • Participate in Wings IPT Joint STARS
  • Conduct and attend weekly design and interface reviews for the Lower Assy Structure IPT.
  • Job description: Analysis, design and drafting of structural engineering works.
  • Detailed descriptions of any of these positions will be provided upon request.
  • Performed design investigations and trade studies; developed models and layouts; specifications, BOMs and interfaced with other IPTs.

Show More

37. Primary Structure

low Demand
Here's how Primary Structure is used in Structural Design Engineer jobs:
  • Prepared design reports for module Primary Structures and Secondary Structures.
  • Designed composite and metallic primary structure.
  • Worked in Structural Department with assignments in layout and design of 737X primary structures.
  • Carried out structural testing for both static and modal response validation of primary structures.
  • Integrated with systems designers and primary structure designers to ensure fit of design.
  • Incorporated hybrid joint technologies for use in primary structures.
  • Issued corrective engineering action for primary structure for MD90.
  • Experienced in Primary Structures Design.
  • Developed 787-8 metallic primary structure for Wing to Fuselage attach with unique flexibledesign to minimize stress.
  • Designed complex metallic primary structures; intercostals, longerons, webs involving contoured surfaces and interfaced with the composite duct.

Show More

38. IBC

low Demand
Here's how IBC is used in Structural Design Engineer jobs:
  • Reviewed plans and details for compliance with IBC, Structural, Architectural and MEP
  • Design Structural Engineer (EIT) Structural Design - Performed Seismic Analysis and Design Based on 2009 IBC and ASCE 7.
  • Performed research and applicability of Life Safety Code, International Building Code (IBC).
  • Load analysis and combinations of loads were completed in accordance with IBC 2003 and ASCE7- 02 building Codes.
  • Review residential and commercial projects for IRC and or IBC code compliance.
  • Recommended retrofitting consisted in replacing existing gypsum shear wall to 1.2 in plywood in accordance with ASCE 41-13 and IBC 2015

Show More

39. Detail Parts

low Demand
Here's how Detail Parts is used in Structural Design Engineer jobs:
  • Designed detail parts and assemblies for MD-11 fixed Wing components and control surfaces.
  • Designed and modeled new 747-8I side frame detail parts.
  • Designed detail parts for MD-11 composite Flap Hinge Fairing.
  • Redesigned detail parts for trade study evaluations.
  • Designed sheet metal & extrusion detail parts.
  • Revised detail parts and flat patterns.
  • Model Based Definition and tolerancing of detail parts and assemblies per Bombardier and ASME Y14.41 Standards.
  • Initialized designed & stress analyze detail parts of Boiler plate & support crane of CCDev.
  • Created detail parts, component assemblies, production drawings and established interface coord sheets.
  • Design and released detail parts for the A350 nacelle thrust reverser and translating sleeve.

Show More

40. Risa

low Demand
Here's how Risa is used in Structural Design Engineer jobs:
  • Prepared preliminary evaluations including RISA runs and sketches for equipment/vessel supports.
  • Designed and developed belt feeder systems using RISA-3D structural engineering software.
  • Designed and developed Stair/Take-up Towers using RISA-3D and static analysis.
  • Designed and developed conveyor galleries using RISA-3D structural engineering software and static analysis, now used as a standardized design.
  • Assessed existing bridges for transverse deck cracking through RISA 3D modeling.
  • Performed Structural Design using Ram Structural Systems and RISA3D.
  • Created 3D and 2D FEA models utilizing RISA.
  • Design of steel platforms using RISA 3D program.
  • Design the structural members on the ETAB, SAP, SAFE, RISA 3D.

Show More

41. Composite Parts

low Demand
Here's how Composite Parts is used in Structural Design Engineer jobs:
  • Developed internal manufacturing standards for composite parts.
  • Designed Composite Parts fabricated On-Site.
  • Modified multiple structural composite parts to eliminate hard corners by providing proper tool surface radii for integral attachment flanges.
  • Assisted in the advanced composite designs to reduce weight, improve strength and stress aging of composite parts.
  • Created manufacturing models and flat patterns for composite parts.
  • Loft Engineering: V-22 Project Develop flat patterns for composite parts and development of Tool Master Layouts.
  • Designed composite parts, machinings, injection molded parts.

Show More

42. Etabs

low Demand
Here's how Etabs is used in Structural Design Engineer jobs:
  • Developed engineering calculations and drawing details, checked structural designs using ETABS, documented discrepancies and suggested modifications.
  • Performed structural analysis and design of the school buildings using ETABS and RAM Structures programs.
  • Performed detailed structural analysis considering dynamic, wind and seismic effects on structure using ETABS.
  • Designed the concrete buildings, K-span Buildings and steel building by Etabs software by considering the American standards.
  • Performed structural analysis for industrial and residential buildings frames using both approximate methods and available software such as SAP and ETABS.
  • Managed a design team to perform post tensions design by using ETABS software and produced quality structural drawings for different projects.

Show More

43. New Designs

low Demand
Here's how New Designs is used in Structural Design Engineer jobs:
  • Coordinated with manufacturing planning assembly of aircraft new designs and revisions.
  • Worked cross-functionally with multiple product development teams to implement new designs.
  • Worked with design engineers to ensure that new designs were within supply and budget constraints.
  • Performed linear tolerance stack-up analysis and coordinated with FEA analysts for new designs.

Show More

44. Solid Models

low Demand
Here's how Solid Models is used in Structural Design Engineer jobs:
  • Created solid models to improve N/C Machining efficiency and achieve cost reductions.
  • Created solid models of MD-11 Aircraft Structure for EDF group on UG - II (version 13).

Show More

45. Design Support

low Demand
Here's how Design Support is used in Structural Design Engineer jobs:
  • Bracket design support for Flight Controls Hydraulic Integration laboratory team.
  • Provided tooling design support for stretch broken carbon fiber (SBCF) prototype beaded panel.
  • Supplied structural design support for Cessna's Citation Ultra Encore and CJ II programs.
  • Provided design support for Falcon Jet's completion center in Little Rock, Arkansas.
  • Design support for AV8B aircraft including repair design and solution of design problems.
  • Provided structural design support for the 747 Airborne Laser and 747-8I development programs.
  • Contributed structural design support for the 767 AFIT group in Everett, WA.
  • Provided design support to Analysis, Manufacturing teams and helped team members.
  • Supplied structural design support for Cessna's advance design engineering team.
  • Provided structural design support for the next generation 737-X program.
  • Design support structures for H1-Y & Z new build helicopters
  • Contributed structural design support for the new 787 Airplane.

Show More

46. New Construction

low Demand
Here's how New Construction is used in Structural Design Engineer jobs:
  • Church of Epiphany, New York: New construction project on a 5,000ft2 site located in New York.
  • Design and draw electronic structural steel plans for use in new construction residential building.
  • Researched new construction techniques and products on a project specific basis.
  • Perform Civil and Structural design tasks for new construction, modification and design improvements Individual project cost to $1.7 mil.
  • Designed and managed five new construction projects of pre-stressed and reinforced concrete and steel warehouses.
  • Reviewed Mobile County residential new construction plans for structural compliance and new high-wind requirements.

Show More

47. Fibersim

low Demand
Here's how Fibersim is used in Structural Design Engineer jobs:
  • Test engineer for new Zone based advanced FiberSIM composite lay-up software, performed cost benefit analysis for management.
  • Experience and training in FiberSIM ACEE, Model Based Definition (MBD) and design package release.
  • Create flat patterns and laser projection data for production of composite structures using FiberSim.
  • Used FiberSIM in the design.o Designed the entire Vertical Stabilizer.
  • Used FIBERSIM to develop flat patterns.
  • Team center solution and FiberSim v5.1

Show More

48. Steel Design

low Demand
Here's how Steel Design is used in Structural Design Engineer jobs:
  • Performed steel designs for a heavily loaded power train platform.
  • Produced completed structural steel designs for fabrication for 200+ buildings.
  • Steel design for pipe racks and misc.
  • Steel design for commercial structures.
  • Developed structural calculations for diverse foundation and steel designs by incorporating vendor and multi discipline and construction needs.
  • Produced structural steel designs and contract documents for fabrication for pre-engineered metal buildings using Vision proprietary software.
  • Generated efficient, safe, timely and under budget foundation and steel designs, while incorporating multi-discipline and construction needs.

Show More

49. IVT

low Demand
Here's how IVT is used in Structural Design Engineer jobs:
  • Evaluated and held mock-up reviews using IVT & DMU.
  • Created FAD IRMs, conducted IVT reviews, defined ENOVIA configuration and released in ENOVIA per Boeing release process.
  • Assisted with the creation of Digital Mockup for use by program engineering team using IVT.
  • Used IVT to check all the Passenger floor structure interfaces..

Show More

50. Structural Calculations

low Demand
Here's how Structural Calculations is used in Structural Design Engineer jobs:
  • Perform structural calculations, evaluations and retrofit alternatives for assigned projects.
  • Checked structural calculations and drawings prepared by other engineers.
  • Managed projects and provided structural calculations and drawings for a variety of new and existing structures.
  • Develop structural calculations to obtain building permits and satisfy the building departments with their concerns.
  • Prepare and review pipe support, pipe stress, and other structural calculations.
  • Performed structural calculations, stamped by P.E.
  • Modified structural calculations to include margin to support an Extended Power Uprate project.
  • Check and discuss to juniordesigners all structural calculations and specifications.Major Projects Undertaken:1.

Show More

20 Most Common Skill for a Structural Design Engineer

Structural Analysis21.1%
Catia13%
Shop Drawings7.1%
Enovia6%
Fuselage5.7%
Autocad5.2%
CAD5.1%
ACI4.6%

Typical Skill-Sets Required For A Structural Design Engineer

RankSkillPercentage of ResumesPercentage
1
1
Structural Analysis
Structural Analysis
15.1%
15.1%
2
2
Catia
Catia
9.3%
9.3%
3
3
Shop Drawings
Shop Drawings
5.1%
5.1%
4
4
Enovia
Enovia
4.3%
4.3%
5
5
Fuselage
Fuselage
4.1%
4.1%
6
6
Autocad
Autocad
3.7%
3.7%
7
7
CAD
CAD
3.6%
3.6%
8
8
ACI
ACI
3.3%
3.3%
9
9
Assembly Drawings
Assembly Drawings
3.2%
3.2%
10
10
PDM
PDM
2.4%
2.4%
11
11
Structural Components
Structural Components
2.3%
2.3%
12
12
Steel Structures
Steel Structures
2.2%
2.2%
13
13
Finite Element Analysis
Finite Element Analysis
2%
2%
14
14
Aisc
Aisc
1.8%
1.8%
15
15
Installation Drawings
Installation Drawings
1.6%
1.6%
16
16
GD
GD
1.6%
1.6%
17
17
Secondary Structures
Secondary Structures
1.5%
1.5%
18
18
Architects
Architects
1.5%
1.5%
19
19
Pipe Supports
Pipe Supports
1.4%
1.4%
20
20
Stress Analysis
Stress Analysis
1.4%
1.4%
21
21
Staad
Staad
1.4%
1.4%
22
22
Design Calculations
Design Calculations
1.3%
1.3%
23
23
Engineering Support
Engineering Support
1.3%
1.3%
24
24
Aerospace
Aerospace
1.2%
1.2%
25
25
Support Structures
Support Structures
1.2%
1.2%
26
26
Trade Studies
Trade Studies
1.2%
1.2%
27
27
Structural Engineer
Structural Engineer
1.1%
1.1%
28
28
Teamcenter
Teamcenter
1.1%
1.1%
29
29
Asce
Asce
1.1%
1.1%
30
30
FAA
FAA
1%
1%
31
31
Freighter
Freighter
1%
1%
32
32
Design Documents
Design Documents
1%
1%
33
33
Design Changes
Design Changes
1%
1%
34
34
Payload
Payload
0.9%
0.9%
35
35
MBD
MBD
0.9%
0.9%
36
36
IPT
IPT
0.9%
0.9%
37
37
Primary Structure
Primary Structure
0.9%
0.9%
38
38
IBC
IBC
0.9%
0.9%
39
39
Detail Parts
Detail Parts
0.8%
0.8%
40
40
Risa
Risa
0.8%
0.8%
41
41
Composite Parts
Composite Parts
0.8%
0.8%
42
42
Etabs
Etabs
0.8%
0.8%
43
43
New Designs
New Designs
0.8%
0.8%
44
44
Solid Models
Solid Models
0.8%
0.8%
45
45
Design Support
Design Support
0.7%
0.7%
46
46
New Construction
New Construction
0.7%
0.7%
47
47
Fibersim
Fibersim
0.7%
0.7%
48
48
Steel Design
Steel Design
0.7%
0.7%
49
49
IVT
IVT
0.7%
0.7%
50
50
Structural Calculations
Structural Calculations
0.7%
0.7%

18,655 Structural Design Engineer Jobs

Where do you want to work?