Structural engineering internship full time jobs

The Schaefer internship and co-op program provides opportunities for students to apply classroom methodology to hands-on modeling and design. The student's Schaefer advisor, mentor and the assigned project team coordinate to ensure the learning experience is relevant and challenging. Successful internships and co-op rotations may lead to full-time employment, as evidenced by our present staff of dedicated and talented structural engineers and modelers, many of whom were students here themselves. The internship position is full-time (40 hours/week) for approximately 3-4 months during the summer of 2026. Scope of Work Develop an understanding of load path and simple statics within basic structures. Work to create structural drawings from engineering designs to markups. Work closely with an assigned mentor who provides hands on support and guidance while working through real projects. Learn engineering software such as Revit and RAM Structural Systems for application on a variety of challenging projects. Participate in site visits and in-house training sessions with other engineers. Qualifications Enrolled in Civil or Architectural Engineering program at an ABET accredited college. Preferred coursework covering topics such as structural analysis, loads and systems or equivalent, concrete design, and structural steel design. Experience in Revit is a plus. Working conditions and physical requirements This work is typically done within an office environment with occasional field work at project + construction sites. When field assignments are required, the working conditions + physical requirements for field staff apply. Normal core working hours will be 9 am - 4 pm but may vary depending on project demands. Overtime work may be required based on work deadlines. Ability to access + navigate construction sites; may require ability to climb + descend ladders or crawl through openings. Some travel may be required for this position: conducting site visits, working out of area, out of state or across the state as driven by project need. The noise level in the work environment is usually moderate. Schaefer is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity or expression, pregnancy, age, religion, national origin, disability status, genetic information, veteran status, or other legally protected status.

Communities everywhere share the need for clean water. And as they work to meet that need, they're facing new, more complex challenges every day. Our water professionals collaborate to contribute innovative ideas, guided by scientific rigor and a vision for sustainable growth. Every day, we're helping communities improve, reuse, and protect our world's most precious resource. Join our team to deliver transformational projects that will benefit future generations. Grow with us, H2O+U. Your Opportunity As an Intern for Summer 2026 based in our Columbus office, you will work in a team environment and have exposure to water resources related projects. Our projects involve flood protection and risk reduction, dams and river diversions, land development, stream restoration, and other aspects of civil engineering. Candidates should be highly motivated and dependable students who are taking or have taken water resources and other civil engineering courses. This is a terrific opportunity for a college student to support a number of exciting local and national projects. Your Key Responsibilities Candidate will assist engineering and administrative staff with such tasks as: * Data processing and management using GIS to support hydrologic and hydraulic modeling * Preparing spreadsheets, graphs, and figures for design reports * Preparing design and construction plans, specifications, quantity take-offs and construction estimates * Assisting with field work for data collection, site inspections and observations * Building surface models in AutoCAD Civil3D * Supporting Project Managers with various tasks to advance and track project progress. * Internship is with the local Water Resources group, but there may be opportunities to assist in other disciplines in the office such as Geotechnical, Transportation, and Environmental Services. Your Capabilities and Credentials * Proficient with Microsoft Office (Word, Excel, PowerPoint) Desired software applications include: AutoCAD Civil 3D and ArcMap/GIS * Strong interpersonal, verbal, and written communication skills * Must have good organizational skills, be reliable, detail orientated and capable of working independently on assigned tasks. * Ability to multi-task, prioritize, and take direction. * Exposure to H&H software applications including HEC-HMS, HEC-RAS, SWMM a plus. Education and Experience * Must be currently enrolled in an accredited degree program for Civil and/or Environmental Engineering degree * Valid driver's license required. * Previous internship or co-op experience a plus Typical office environment working with computers and working at a desk for long periods of time. Field work may include exposure to the elements including inclement weather. This description is not a comprehensive listing of activities, duties or responsibilities that may be required of the employee and other duties, responsibilities and activities may be assigned or may be changed at any time with or without notice. Stantec is a place where the best and brightest come to build on each other's talents, do exciting work, and make an impact on the world around us. Join us and redefine your personal best. Pay Transparency: In compliance with pay transparency laws, pay ranges are provided for positions in locations where required. Please note, the final agreed upon compensation is based on individual education, qualifications, experience, and work location. At Stantec certain roles are bonus eligible. Actual compensation for part-time roles will be pro-rated based on the agreed number of working hours per week. Benefits Summary: Regular full-time and part-time employees (working at least 20 hours per week) have access to medical, dental, and vision plans, a wellness program, health saving accounts, flexible spending accounts, 401(k) plan, employee stock purchase program, life and accidental death & dismemberment (AD&D) insurance, short-term/long-term disability plans, emergency travel benefits, tuition reimbursement, professional membership fee coverage and paid family leave. Regular full-time and part-time employees will receive ten paid holidays in each calendar year. In addition, employees will be eligible to accrue vacation between 10 and 20 days per year and eligible for paid sick leave (and if more generous, in accordance with state and local law). Temporary/casual employees have access to 401(k) plans, employee stock purchase program, and paid leave, in accordance with state and local law. The benefits information listed above may not apply to union positions because benefits for such positions are governed by applicable collective bargaining agreements Primary Location: United States | OH | Columbus Organization: BC-1734 Water-US North Central Employee Status: Regular Travel: No Schedule: Full time Job Posting: 18/09/2025 01:09:17 Req ID: 1002330 Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment. At Stantec we are committed to ensuring our recruitment process is accessible to all. If you require reasonable adjustments to be made during the recruitment process then please inform a member of our Talent Acquisition team.

**Civil Engineer Intern - Water** Company: Black & Veatch Family of Companies **Together, we own our company, our future, and our shared success.** As an employee-owned company, our people _are_ Black & Veatch. We put them at the center of everything we do and empower them to grow, explore new possibilities and use their diverse talents and perspectives to solve humanity's biggest challenges in an ever-evolving world. With over 100 years of innovation in sustainable infrastructure and our expertise in engineering, procurement, consulting and construction, together we are building a world of difference. **Company :** Black & Veatch Corporation **Req Id :** 111338 **Opportunity Type :** College Intern **Relocation eligible :** Yes **Full time/Part time :** Full-Time **Project Only Hire :** No **Visa Sponsorship Available:** No **Job Summary** As a Summer Intern at Black & Veatch you will play a meaningful role in addressing some of the world's most critical infrastructure challenges. This internship offers the opportunity to contribute to diverse, impactful projects that support our clients' goals while fostering your professional growth and advancing the success of Black & Veatch. In this position, potential office locations include: + Chicago + Bloomington + Columbus + Milwaukee **Key Responsibilities** + Develop, evaluate, and design specifications and contract drawings + Perform variety of tasks to support engineering analyses, report production, and designs + Prepare basic calculations + Assist in basic equipment selection + Coordinate with other disciplines + Schedule project deliverables + Collect, organize, and evaluate data + Analyze systems utilizing computer modeling + Organize and file project materials and references **Preferred Qualifications** GPA of **3.0 or higher** preferred. Preferred Skills: + Analytical skills + Communications skills, both written and oral + Initiative + Self starter, highly motivated + Attention to detail + Interpersonal skills + Mathematical skills + Problem solving skills + Computer skills **Minimum Qualifications** No experience required. Current enrollment in ABET accredited university in Civil Engineering program with emphasis in Structural, Environmental, Transportation, or Geotechnical. All applicants must be able to complete pre-employment onboarding requirements (if selected) which may include any/all of the following: criminal/civil background check, drug screen, and motor vehicle records search, in compliance with any applicable laws and regulations. **Work Environment/Physical Demands** This intern position is expected to be in the office on a full-time basis. **Salary Plan** ENG: Engineering **Job Grade** 097 Black & Veatch endeavors to makeaccessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process because of a disability, please contact the Employee Relations Department at *************** orvia our. This contact information is for disability accommodation requests only; you may not use this contact information to inquire about the status of applications. General inquiries about the status of applications will not be returned. This job posting will remain open until a suitable candidate(s) has been identified. Black & Veatch is committed to being an employer of choice by creating a valuable work experience that keeps our people engaged, productive, safe and healthy. Our comprehensive benefits portfolio is a key component of this commitment and offers and array of health care benefits including but not limited to medical, dental and vision insurances along with disability and a robust wellness program. To support a healthy work-life balance, we offer flexible work schedules, paid vacation and holiday time, sick time and dependent sick time. A variety of additional benefits are available to our professionals, including a company matched 401k plan, adoption reimbursement, vendor discounts, an employment referral program, AD&D insurance, pre-taxed accounts, voluntary legal plan and the B&V Credit Union. Professionals may also be eligible for a performance-based bonus program. We are proud to be a 100 percent ESOP-owned company. As employee-owners, our professionals are empowered to drive not only their personal growth, but the company's long-term achievements - and they share in the financial rewards of that success through stock ownership. By valuing diverse voices and perspectives, we cultivate an authentically inclusive environment for professionals and are able to provide innovative and effective solutions for clients. BVH, Inc., its subsidiaries and its affiliated companies, complies with all Equal Employment Opportunity (EEO) laws and regulations. Black & Veatch does not discriminate on the basis of age, race, religion, color, sex, national origin, marital status, genetic information, sexual orientation, gender Identity and expression, disability, veteran status, pregnancy status or other status protected by law. For our EEO Policy Statement, please click. **Notice to External Search Firms** : Black & Veatch does not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Black & Veatch Talent Acquisition engages with search firms directly for hiring needs. In accordance with local law, the following Hourlycompensation range is applicable for the job and location associated with this requisition: $18.04- $37.29 **Job Segment:** Civil Engineer, Construction, Entry Level Engineer, Engineer, Geology, Engineering

This job code is utilized for the majority of our temporary hires. The individual is performing hourly job duties as defined under the Fair Labor Standards Act. US Veteran transitioning from active service or active-duty Military Spouse new to corporate experience preferred Veterans and Military Spouses belong at Oracle This is a place where your military experience and talent will help you thrive. Our culture of inclusion values the skills that veterans bring to our workforce and empowers you to use them to transform the world for the better. Get a head start on your civilian career today. About the Oracle Veteran Internship Program (OVIP): Oracle is proud to sponsor an internship and integration program that exposes transitioning military veterans and active-duty Military Spouses new to the corporate culture, provides hands-on job-skill training and experience, and offers enhanced professional and personal development. At Oracle, we are committed to the development and professional growth of our veterans and military spouses. Our paid internship program is specifically designed to aid military veterans, transitioning servicemembers and active-duty military spouses new to the corporate sector in their transition to a career in the private or public sector. Veterans and Military Spouses accepted into our program will work closely with corporate leadership, military veteran coaches and HR professionals to help prepare for a successful transition. Interns will engage in on-the-job training and professional development in fields such as information technology, technical/systems consulting, technical support, facilities, finance, human resources, logistics, marketing, sales or developmental training in sales or for customer support (as available). US Veteran transitioning from active service or Military Spouse new to corporate experience preferred NetSuite GBU is seeking a highly motivated, results-oriented Veteran intern to support the NetSuite GBU Customer Success with special projects supporting several areas of the organization including Operations, Enablement, Process Efficiency Team (PET), Systems and Delivery. These special projects will be supporting key leaders and/or team members of the organization. Activities may include but are not limited to the following: business analysis, support for key initiatives, cross-functional coordination with other members of the team in which you are working as well as cross-functionally with other teams across the organization and the Business to support team objectives, support for key reports to Leadership, and team lead support. This role offers a wide exposure to all aspects and areas of our growing cloud business. **Responsibilities** JOB RESPONSIBILITIES: - Carry out special projects as assigned by team leads and/or executive management - Provide support, including but not limited to performing data analysis, compiling and presenting analysis results to team leads/Executive management and general development of key initiatives/projects - Provide inputs to key reports and communications for team leads - Build proactive, positive relationships with peers, managers, Customer Success team members EDUCATION & EXPERIENCE: BS degree or equivalent experience relevant to functional area. Business, Marketing, Finance, Project Management or related experience preferred - Attention to detail and ability to multi-task required - Excellent communication and interpersonal skills required - Must be able to function as part of a team and adhere to strict deadlines in a fast-paced, evolving work environment - MS Office skills required (Word, Excel, Power Point, Outlook at a minimum) US Veteran transitioning from active service or Military Spouse new to corporate experience preferred About the Company: For more than four decades, Oracle has delivered innovations that have helped build entire industries. We remain the gold standard as the world's first autonomous database and industry's broadest and deepest suite of AI-powered cloud applications. The following facts and figures highlight some of the many ways we continue to deliver innovations for our customers, partners, and communities. With annual revenue of US$57 billion in FY2025, Oracle is the world's largest EHR implementation, serving more than 9.5 million beneficiaries spanning the United States, Europe, and the Asia Pacific region; has 5 million registered members of Oracle's customer and developer communities; and 469 independent user communities in 97 countries representing more than 1 million members. Additional Information: Hourly wage is $30 per hour. This is a 40 hour per week position Disclaimer: **Certain US customer or client-facing roles may be required to comply with applicable requirements, such as immunization and occupational health mandates.** **Range and benefit information provided in this posting are specific to the stated locations only** US: Hiring Range in USD from $19.62 to $38.32 per hour; from: $40,800 to $79,700 per annum. Oracle maintains broad salary ranges for its roles in order to account for variations in knowledge, skills, experience, market conditions and locations, as well as reflect Oracle's differing products, industries and lines of business. Candidates are typically placed into the range based on the preceding factors as well as internal peer equity. Oracle US offers a comprehensive benefits package which includes the following: 1. Medical, dental, and vision insurance, including expert medical opinion 2. Short term disability and long term disability 3. Life insurance and AD&D 4. Supplemental life insurance (Employee/Spouse/Child) 5. Health care and dependent care Flexible Spending Accounts 6. Pre-tax commuter and parking benefits 7. 401(k) Savings and Investment Plan with company match 8. Paid time off: Flexible Vacation is provided to all eligible employees assigned to a salaried (non-overtime eligible) position. Accrued Vacation is provided to all other employees eligible for vacation benefits. For employees working at least 35 hours per week, the vacation accrual rate is 13 days annually for the first three years of employment and 18 days annually for subsequent years of employment. Vacation accrual is prorated for employees working between 20 and 34 hours per week. Employees working fewer than 20 hours per week are not eligible for vacation. 9. 11 paid holidays 10. Paid sick leave: 72 hours of paid sick leave upon date of hire. Refreshes each calendar year. Unused balance will carry over each year up to a maximum cap of 112 hours. 11. Paid parental leave 12. Adoption assistance 13. Employee Stock Purchase Plan 14. Financial planning and group legal 15. Voluntary benefits including auto, homeowner and pet insurance The role will generally accept applications for at least three calendar days from the posting date or as long as the job remains posted. Career Level - IC0 **About Us** As a world leader in cloud solutions, Oracle uses tomorrow's technology to tackle today's challenges. We've partnered with industry-leaders in almost every sector-and continue to thrive after 40+ years of change by operating with integrity. We know that true innovation starts when everyone is empowered to contribute. That's why we're committed to growing an inclusive workforce that promotes opportunities for all. Oracle careers open the door to global opportunities where work-life balance flourishes. We offer competitive benefits based on parity and consistency and support our people with flexible medical, life insurance, and retirement options. We also encourage employees to give back to their communities through our volunteer programs. We're committed to including people with disabilities at all stages of the employment process. If you require accessibility assistance or accommodation for a disability at any point, let us know by emailing accommodation-request_************* or by calling *************** in the United States. Oracle is an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability and protected veterans' status, or any other characteristic protected by law. Oracle will consider for employment qualified applicants with arrest and conviction records pursuant to applicable law.

The Mannik & Smith Group, Inc. (MSG) is a people focused, award-winning, full-service consulting firm that offers a wide array of services including civil and geotechnical engineering, environmental consulting, planning, landscape architecture, agriculture, surveying and construction support. Our talented staff of professionals deliver integrated planning, design, engineering and construction solutions to our clients from our offices throughout Ohio, Indiana, Michigan, West Virginia and Alabama. Build the Bridges That Move Communities Forward The Mannik & Smith Group (MSG) is seeking a full-time Structural Engineer ready to take ownership of bridge and highway structure projects from concept through final design. If you have a passion for structural engineering, enjoy mentoring, and want to make a tangible impact on transportation infrastructure, this is your chance to grow your career while helping communities thrive. Key Responsibilities What You'll Do As a Structural Engineer at MSG, you'll be involved in all phases of bridge and highway structure design, including: * Design and analysis of highway structures and bridges, ensuring safety, efficiency, and compliance with all standards. * Field inspections of transportation structures and bridges to assess condition and provide technical recommendations. * Preparation of engineering deliverables, including reports, plans, specifications, estimates (PS&E), and calculations, while monitoring work for adherence to applicable codes. * Lead projects or disciplines, acting as the project engineer or lead for bridge projects, while mentoring junior engineers and technicians. * Collaborate across teams, partnering with survey, geotechnical, and transportation staff to deliver integrated solutions. Skills, Knowledge and Expertise * Bachelor's degree or greater in Civil or Structural Engineering or related field * 8+ years of experience with structural engineering, including bridge work * PE required * Experience with bridge design and analysis, ODOT experience a plus * Experience working in STAAD-Pro, MDX, and Leap Bridge Designer, with Midas Civil experience a plus. * Knowledge of Bridge and Culvert Manual, AASHTO, AISC, ACI, IBC, and ASCE 7 specifications Benefits Why Join MSG? At MSG, you'll be part of a growing, people-focused firm that values innovation, collaboration, and integrity. You'll have the freedom to lead, the support to grow, and the opportunity to make a difference - in your career, on your team, and in the communities we serve. * 401(k) w/ company match * Health insurance w/ HSA option, Vision, Dental, Life * Flexible schedule * Paid time off * Referral program * Tuition reimbursement * Catalytic Coaching - Employees draft a development plan aimed at improving contributions in their current job and increasing the potential for other opportunities. MSG is all about bringing out the best in people at work! It is the policy of our company to follow equal employment opportunity procedures in compliance with federal, state and local criteria. We will provide all applicants for employment, and all employees, with equal opportunity without regard to race, color, religion, national origin, age, sex, height, weight, marital status, arrest record, disability, pregnancy, sexual orientation, gender identity or expression, genetic information, military or veteran status, and/or any other protected classes covered by any local, state and federal laws. #LI-CO1

Job DescriptionSalary: $15 to $20 per hour The MORPC Local Government Summer Internship Program provides the opportunity for undergraduate and graduate students to obtain practical work experience with a local government within MORPCs 15-county region to prepare them for possible careers in public service. MORPC coordinates the recruitment and placement of students to match each hosts request; hosts make the final hiring decision and provide an hourly wage. Interns work for a host for a minimum of 16 hours to a maximum of 40 hours per week for a 10- to 14-week period, which means there are both part-time and full-time positions available. The summer 2026 internship program will begin on May 12th and will end on August 14th. Interns gain applicable knowledge to enhance classroom learning by working with current government professionals throughout Central Ohio and acquire insights into the services provided by a regional planning commission. Interns also can attend monthly commission meetings as well as special MORPC-sponsored events and are paired with a MORPC staff member to serve as their mentor during the summer internship program. Previous Civil Engineering/Engineering interns have gained experience using Microsoft Excel, Bluebeam Revu, ArcGIS, Hydro CAD, Streetmix, Adobe Acrobat, FMX, and other software programs on the job. Specific past assignments include: Regulating private stormwater BMP (Best Management Practice) that applies to wet, dry, and bio retention basins Assisting in bridge overhauls, culvert installations, and road paving Creating site plan reviews for private housing developments Assisting with construction project management for capital improvement projects such as roadways, traffic signals, sidewalks, and shared-use paths Estimating bike lanes and decorative intersection costs in addition to performing preliminary route planning Reviewing and submitting sewer right of way plans in addition to collecting and organizing said plans to be uploaded to city database Assisting City/County Engineers with planning processes Creating/updating paybooks, project bill of materials, and other duties as assigned Qualifications Students must meet the following requirements: 30 hours of completed college coursework (preferred) Interest in public service careers GPA 3.0 or higher (preferred) Legally eligible to work in the United States Reliable transportation to and from work Attend a Central Ohio college OR attend other college and have access to local housing Benefits All MORPC internships are paid opportunities! Pay ranges between $15 to $20 per hour depending on the host. Additional benefits include practical work experience, mentorship, and exposure to services offered by a regional planning commission. Please apply online at ***************************** or you may mail a resume to: MORPC Attn: GA-2-25 111 Liberty St., Suite 100 Columbus, OH 43215 ************* No phone calls please.

Korda/Nemeth Engineering, Inc. is seeking an Entry-Level Structural Engineer for an immediate opening. If you are interested in joining a team that provides varied and complex engineering services for building construction resulting in value delivered to our clients, this opportunity is worth pursuing. Our projects and work environment foster individual creativity, collaborative interaction, and teamwork. This position will get you started on your career as a consulting engineer and to becoming a licensed Professional Engineer (P.E.). Founded in 1964, Korda/Nemeth Engineering, Inc. is a multi-disciplinary, nationally recognized consulting engineering firm providing civil, surveying, transportation, electrical, mechanical, structural, and technology engineering services. Our integrated engineering approach and experience make Korda/Nemeth Engineering the consulting engineering firm of choice for a variety of project types including Healthcare, Sports and Recreation, Science and Technology, Higher Education, High-Rise Buildings, Public Agencies involving Transportation, Bridge, Public Works, and more. (Please visit *************** As a consulting engineer, your task is to design and analyze the following building systems and prepare the drawings and specifications for bidding and construction by contractors: Steel building structures Concrete building structures Post-tensioned concrete structures Wood building structures High-Rise structures Fabric structures This position involves interpreting and applying local and national code requirements as part of the design for the safety of the public. To be successful in this position, it is necessary to possess: Excellent time management and communication skills Ability to work on multiple projects in a collaborative environment Good social skills, as you represent our company at client meetings Willingness to learn new skills and to work towards continuous improvement Willingness to work additional time as required to meet project deadlines Qualifications: Bachelor's Degree in Structural Engineering or Civil Engineering with structural design emphasis and course work New Graduate to 4 years of experience Must be interested in pursuing professional registration Must be able to provide proof of eligibility to work in the United States and authorized to work on a full-time basis. No visa sponsorship available at this time. Position includes the following benefits for Regular Full-Time Employees: Medical and Dental Insurance (employee, spouse, and family) Life Insurance and Short-Term and Long-Term Disability Insurance Supplemental Life and Vision Insurance Paid vacation, sick leave, and eight paid holidays Salary is commensurate with experience and position. WHAT IS IT LIKE TO WORK AT KORDA? See what our employees and partners have to say: ****************************** IMPORTANT: Applicants accepted through December 30, 2025. Please provide resume and cover letter explaining how your experience and background is a match for our needs. If you require accommodation to complete an online application, please contact Human Resources at ************. We are an equal opportunity employer. Applicants and employees are free from discrimination on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, pregnancy accommodations, reprisal, or other non-merit based factors.

Job Details Columbus Office - Columbus, OH Full Time Up to 25% DayOverview of Position Founded in 1892, by Frank Osborn who authored the popular engineering handbook Osborn's Tables of Moments of Inertia and Squares of Radii of Gyration , which featured working strengths of steel members, timber beams and columns, and standard loads, unit stresses and constants for a variety of structures. The book quickly became a much-used industry text, the forerunner to today's popular AISC Steel Construction Manual . Join the firm to continue the legacy that he has built in the Structural Field. Osborn Engineering is seeking a Structural Engineer with 8+ years' experience for our office locations who will report to the Manager of Structural Engineering. The ideal candidate would have working knowledge of Revit and Structural design in the Consulting Engineering environment. Position Responsibilities: Coordinating Structural design with MEPFC consultants Coordinating Architect, Clients and Contractors. Maintain client relationship Manage multiple projects at various stages in design Write project specifications Knowledge of Post tension design is a plus Manage/Help production of documents for the project in Revit / AutoCAD Perform detailed design and analysis of the project using either RISA, Tedds or Enercalc Gravity - Roof, Floors, Walls and Foundations Lateral - Main Lateral load resisting elements + Components and Cladding Perform cost estimation and value engineering when required Perform site visit for collecting existing information or site observations Respond to permit comments, RFIs and Change orders Attend project coordination meetings Help with proposal writing and fee estimation Perform QAQC on projects done by other engineers Review shop drawings and inspection reports Help with maintaining project schedule Excellent organizations and communication skills Proactive and Collaborative team member Job Requirements/Qualifications: BS Structural Engineering. PE registration a plus. 8+ years of structural design experience. Midrise Multifamily or commercial office buildings design. Ability to take a project from concept design to completion Proficient with Revit and AutoCAD Proficient with MS office - Word and Excel Strong Technical knowledge - Concrete, Steel, Wood, Masonry and Cold-form Familiar with the building and material Codes - IBC, AISC, ACI, NDS, AISI Strong work ethics. Industrial, Institutional, Higher Education, K-12 a plus. Excellent Organizational and Communication skills. Proactive and Collaborative team member. Working knowledge of Revit. Additional Information Osborn is looking for a candidate who has the following characteristics: Reliable Team Player Self - Starter Positive Attitude Strong Work Ethic Critical Thinker Detail Oriented Innovative Good Communicator We can offer you a challenging career with one of the Nation's most respected and diverse Engineering Firms. Attractive profit sharing and stock ownership programs supplement our competitive salary and benefits package. All job offers will be contingent on passing a background check. Drug testing may be required for certain clients. Osborn/OSPORTS will only be contacting qualified applicants. EEO NOTE TO RECRUITERS: Osborn Engineering does not currently accept unsolicited resumes through or from search firms or recruiters. If you wish to be considered in the future for our list of approved recruiters, please send an e-mail to **************************. All resumes sent directly to management will not be considered.

Title: Structural Engineer Duration: Full Time Our client is looking to hire a Structural Engineer. This is an immediate need. Candidates need to be local Columbus. This is an onsite position. Remote or Hybrid is not an option. Responsibilities: • Perform analysis and designs of commercial, residential building projects, telecommunications structures and other types of structures. • Perform complex engineering calculations by hand or by utilization of computer software such as Microsoft Excel, Enercalc, Bentley System programs and other finite element analysis software. • Work to develop deliverables such as structural design drawings and calculations packages using Microsoft Word, AutoCAD, Revit and other computer software. • Assist in the development of engineering tools to effectively manage the analysis and design process. • Responsible for visiting job sites to observe construction work or to gather field data for renovation projects. • Effectively interact with the client and monitor project timelines and project deliverables to ensure client satisfaction. • Document accurate analysis results and prepare reports and letters for delivery to the client. • Work respectfully with architects, contractors, and other clients and employees in our office, at a client's office or in the field. Required Qualifications: • Bachelor or Master of Science degree in Structural Engineering or Civil Engineering, with an emphasis in structures, from an ABET accredited institution. • Strong understanding of design codes and regulations for buildings and towers. • Strong understanding of steel, concrete and wood design principles. • Candidates must be a U.S. citizen or able to legally work in the Unites States. • Candidates should have excellent communication and organization skills and should exhibit a high level of self-motivation and productivity. • Professional Engineering (PE) license is a plus. • Experience: A minimum of three (3) years of building design experience. Our client offers the following benefits: Salary; Profit Sharing: 401K matching; health, dental and vision insurance; life insurance; competitive PTO. Schedule: Monday-Friday 8:00-5:00 pm

Arizona - Remote; Arkansas - Remote; Florida - Remote; Georgia - Remote; Idaho - Remote; Illinois - Remote; Indiana - Remote; Iowa - Remote; Kansas - Remote; Kentucky - Remote; Louisiana - Remote; Michigan - Remote; Mississippi - Remote; Missouri - Remote; Nebraska - Remote; Nevada - Remote; New Mexico - Remote; North Carolina - Remote; Ohio - Remote; Oklahoma - Remote; South Carolina - Remote; Tennessee - Remote; Texas - Remote; Utah - Remote; Virginia - Remote; West Virginia - Remote; Wisconsin - Remote; Wyoming - Remote **Company Description** We are Olsson, a team-based, purpose-driven engineering and design firm. Our solutions improve communities, and our people make it possible. Our most meaningful asset is our people, and we are dedicated to providing an environment where they can continue to learn, grow, and thrive. Our entrepreneurial spirit is what has allowed us - and will continue to allow us - to grow. The result? Inspired people, amazing designs, and projects with purpose. **Job Description** As a Project Structural Engineer at Olsson, you will work with some of the world's largest technology companies and other mission-critical clients. You will independently handle engineering and project management tasks on small to medium-sized projects, from conception to completion. Your responsibilities will include processing design calculations, developing project scopes and schedules, and producing structural construction drawings and specifications. Experience in the Data Center industry is preferred. You will also coordinate with other Olsson teams, professional staff, technical staff, and clients. _*We have one opening and will consider candidates interested in being hybrid, working remotely, or working out of any Olsson office location regions/areas._ **Qualifications** **You are passionate about:** + Working collaboratively with others. + Having ownership in the work you do. + Using your talents to positively affect communities. **You bring to the team:** + Strong communication skills + Ability to contribute and work well on a team + Masters degree in Civil or Architectural Engineering (structural emphasis) is preferred, but not required + Experience utilizing structural design and drafting software packages preferred + 7+ years of relevant experience + Data Center experience preferred + Revit experience required + Must be a registered professional engineer **\#LI-DNI** **\#Remote** **Additional Information** Olsson is a nationally recognized, employee-owned firm specializing in planning and design, engineering, field services, environmental, and technology. Founded in 1956 on the very mindset that drives us today, we're here to improve communities by making them more sustainable, better connected, and more efficient. Simply put, we work to leave the world better than we found it. As an Olsson employee, you'll receive our traditional benefits package (health care, vision, dental, paid time off, etc.), plus you'll: + Engage in work that has a positive impact on communities + Receive an excellent 401(k) match + Participate in a wellness program promoting balanced lifestyles + Benefit from a bonus system that rewards performance + Have the possibility for flexible work arrangements **Please note:** The benefits listed above apply to full-time employees. If you're applying for an internship, you can learn more about internship-specific offerings and experiences at Olsson by visiting ********************************** . Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Noticehere (************************************** . Create a Job Alert Interested in building your career at Olsson? Get future opportunities sent straight to your email.

Job Details Entry Columbus Office - Columbus, OH Internship 4 Year Degree $19.00 - $22.00 Hourly Negligible Day EngineeringInternship Opportunities EWI is a world leader in developing and deploying new technologies that enable companies to bridge the gap between R&D and manufacturing implementation. EWI Associates are passionate about identifying out-of-the-box options that provide a long-term competitive advantage for our clients. Our clients tell us we are a valuable extension and complement to their innovation, engineering and manufacturing teams. If you enjoy working with customers and solving challenging, technical problems, EWI is the place for you. EWI provides a rich learning environment for undergraduate and graduate students seeking opportunities for practical application of metallurgical, welding, mechanical, materials science, industrial engineering and allied fields. Engineer Interns will assist Engineers and Technicians in project work and perform tasks which allow EWI to operate more efficiently as a whole. During the program interns will transition from a technical labor-based position to that of a functioning engineer, gaining exposure to different industries and technologies along the way. Internship opportunities vary with business needs. During the summer term, interns are expected to work 40 hours per week. If the opportunity is available, interns may be able to work in the fall and spring semesters for a defined number of hours per week in coordination with the student's curriculum. **There are seven (7) total internship positions available focusing on the following technologies: Resistance & Solid-State Welding (RSSW) Corrosion & Environmental Testing (CET) Polymers (Ultrasonics) Non-Destructive Evaluation (NDE) Arc Welding & DED Processes Friction Stir Welding (FSW) Structural Integrity Minimum Requirements KNOWLEDGE/SKILLS/ABILITIES: Strong interpersonal communication skills and ability to effectively present to a group Proven adaptability and flexibility as a part of team Proven success in a team-oriented environment Excellent written and verbal communication abilities Solutions-oriented mindset Desire to work in hands-on lab environment and research environment Seeking to learn from leading minds in innovation Demonstrated initiative to exceed customer expectations Proficient in MS Office PHYSICAL REQUIREMENTS: Laboratory/light production floor with ventilation, climate-control system, moderate lighting, and moderate noise level; Use finger dexterity to type, adjust, move, handle, perform, operate, install, attach, remove, apply, grasp, manipulate, and measure; Frequently move, transport, rotate, reach, pull, twist, adjust position, push, stoop, bend, and crouch; and Lift ten to 40 pounds on a frequent basis and 40 to 80 pounds occasionally ENGINEERING CURRICULUM REQUIREMENTS: Currently enrolled in an undergraduate or graduate program in engineering at an accredited university Engineering disciplines preferred: Welding Materials Science Mechanical Polymers Chemical Corrosion Electrical Industrial Other relevant areas of study EXPORT CONTROLS - This position requires access to information and technology that is subject to U.S. export controls. To conform to U.S. export control regulations, applicant should be eligible for any required authorizations from the U.S. Government. EOE/M/F/Disability/Protected Veteran Status Accommodations Individuals who need reasonable accommodations under the ADA in order to participate in the search and/or application process should contact Human Resources at **************.

Join American Structurepoint and become part of a team that goes the extra mile for our clients and communities. We live by our values - respect, staff development, results and family. Our team is encouraged to explore new ideas and turn our clients' dreams into reality. With exceptional benefits, training, and mentorship, we pave the way for a rewarding career. Ready for more than just a job? Explore opportunities with us and help improve the quality of life in the communities we serve. American Structurepoint's Road Group is seeking candidates to join us for our summer internship program in Indianapolis, IN! As a Road Intern, you'll work as part of a close-knit team on roadway projects for ODOT, cities, towns, and counties throughout Ohio. Most of your work will take place in the office, with occasional site visits, as you assist with quantity takeoffs, create construction plan sets using MicroStation OpenRoads Designer (ORD), prepare design documentation, and develop construction cost estimates. From large interstate and interchange projects to urban reconstructions, rural maintenance, and roundabouts, you'll gain hands-on experience across a wide variety of impactful transportation projects. This is more than just an internship-it's your opportunity to build technical skills, explore your future in civil engineering, and help shape Ohio's infrastructure. Why Intern with us: Intern Day: A two-day celebration with all interns from across our design centers Weekly Lunch & Learns: Learn about our different disciplines from real professionals Mentorship & Career Growth: Gain experience and build lasting professional connections Real Projects: Contribute to actual designs that impact your local community Future Opportunities: Stand out and come back for another summer or full-time post-graduation Scholarships & Networking: Exclusive opportunities and connections within the industry Responsibilities What you will do: Contribute to roadway design by working on design calculations, roadway layouts, drainage analysis, plan production, and quantity and cost estimates Gain hands-on experience with 3D modeling and work with tools like MicroStation/GEOPAK, Bluebeam, Microsoft Word, Excel, and PowerPoint Get involved in a wide variety of projects-everything from roundabouts and urban streets to rural roads, drainage improvements, and large interstate projects Other duties as assigned Qualifications Who you are: Student majoring in Civil Engineering, Construction Engineering, Transportation, Hydraulics, or a related program with a focus on Civil Engineering Reliable transportation to and from the office Strong work ethic, eagerness to learn, willingness to take on new challenges, and a collaborative mindset American Structurepoint is an equal employer opportunity and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status or any other characteristic protected by law. Who you are: Student majoring in Civil Engineering, Construction Engineering, Transportation, Hydraulics, or a related program with a focus on Civil Engineering Reliable transportation to and from the office Strong work ethic, eagerness to learn, willingness to take on new challenges, and a collaborative mindset

Embrace Your Possibilities: At Brown and Caldwell, an environmental engineering firm, we're unlocking the potential of water and healthy environments to create thriving communities. Delivering this shared purpose starts with our people: We recruit individuals seeking to develop their skills and gain experience to build a strong foundation for the future Through an internship at Brown and Caldwell, you'll gain real-life, hands-on experience alongside our employee owners, engineers, scientists, consultants, and constructors who are driving positive changes for our clients and communities. Here you'll find opportunities for impact, community that lifts, support to thrive, and trust in you as you embark on your career journey. So, what's possible for you? Brown and Caldwell offers Summer Internship opportunities to spend a summer working with our team to support the Midwest. We are seeking an individual interested in gaining practical, hands-on experience outside of the classroom. We promise a collaborative environment where you will grow as a professional under the guidance of your people manager and team and be trusted to support project objectives. Our work is interesting, challenging, wide-ranging in nature, and impactful for the communities we live in. We invite you to embrace your possibilities and join us to learn and develop with our team of nationally recognized experts! Detailed Description: How Will You Make an Impact?: Interns at Brown and Caldwell make a daily, material impact by completing support duties to advance their team's projects and objectives. They receive professional training and the support of their team. Interns can expect to be onboarded, mentored, and developed by industry leaders to develop real-life skills and make an impact on their assigned projects. As a Summer Intern, you can expect your experience to include the following: * Collaborate closely with people managers, project managers, engineers, scientists, and multidisciplinary teams to support projects in water, wastewater, drinking water, environmental engineering, design, sustainability, climate mitigation, and more. * Assist in the preparation of technical deliverables including but not limited to calculations, reports, drawings, specifications, and memoranda. * Potential to participate in field work and site visits to support project design, construction, and data collection activities. * Perform data entry, analysis, and visualization to support engineering and scientific evaluations. * Ensure quality and accuracy by adhering to Brown and Caldwell's QA/QC processes and standards. * Communicate effectively with internal teams and external clients to coordinate project tasks and deliverables. * Support engineering services during construction by reviewing submittals, conducting inspections, and verifying conformance with plans and specifications. * Manage and deliver assignments on time, demonstrating strong organizational and time management skills. * Complete an Internship Capstone project demonstrating skill development, learning, and accomplishments gained during the summer internship experience. Work schedule and location: Summer Interns with Brown and Caldwell work a full-time schedule of 40 hours a week and may have the potential for hybrid work schedules and fieldwork Desired Skills and Experience: What Must Our Candidate Have? (Required) * To qualify for an internship, you must be enrolled as a student seeking a degree in Environmental, Civil, Mechanical, Structural, Electrical, Chemical Engineering or a related field. * You must be enrolled for the 2025-2026 academic year and plan to continue in Fall 2026. * You also must maintain a minimum cumulative GPA of 3.0 on a 4.0 scale. Salary Range: The hourly pay range for this position is based on the employee's primary work location and may be more or less depending upon skills, experience, and education. These ranges may be modified in the future. Location A: Hourly $18.40 - $25.20 Location B: Hourly $20.20 - $27.70 Location C: Hourly $22.00 - $30.20 You can view which BC location applies to you here. If you have any questions, please speak with your Recruiter. Benefits and Other Compensation: We provide a comprehensive benefits package that promotes employee health, performance, and success which includes medical, dental, vision, short and long-term disability, life insurance, an employee assistance program, paid time off and parental leave, paid holidays, 401(k) retirement savings plan with employer match, performance-based bonus eligibility, employee referral bonuses, tuition reimbursement, pet insurance and long-term care insurance. Click here to see our full list of benefits. About Brown and Caldwell Headquartered in Walnut Creek, California, Brown and Caldwell is a full-service environmental engineering and construction firm with 50 offices and 2,100 professionals across North America and the Pacific. For 75 years, we have created leading-edge environmental solutions for municipalities, private industry, and government agencies. We strive to be the company of choice-to our clients, who benefit from our passion for delivering exceptional quality, and to our employees, present and future, who share our commitment to client service, collaboration, and innovation. Join us, and you will find a home where you can do your best work, reach new levels of expertise, and enjoy exceptional development opportunities. For more information, visit ************************ This position is subject to a pre-employment background check and a pre-employment drug test. Notice to Third Party Agencies: Brown and Caldwell does not accept unsolicited resumes from recruiters or employment agencies. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement and approved engagement request with Brown and Caldwell, Brown and Caldwell reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Brown and Caldwell is proud to be an EEO/AAP Employer. Brown and Caldwell encourages protected veterans, individuals with disabilities, and applicants from all backgrounds to apply. Brown and Caldwell ensures nondiscrimination in all programs and activities in accordance with Title VI of the Civil Rights Act #Intern26

Capital Resin Corporation (CRC) is passionate about innovation and pushing the boundaries of customer service. Our focus is helping companies create new and innovative organic chemistries, or improving upon current chemistries, to deliver greater consistency and process stability. We manufacture and sell engineered chemistries as well as design and build chemical processes for a variety of Fortune 500 companies. We deliver transformational results. Who we are. Capital Resin Corporation is a 24/7 production environment dedicated to quality and customer responsiveness. We've had significant growth in the past few years and are continuing to build upon that growth. As such, we are always interested in communicating with those individuals who are adaptive, creative, responsive, logical, able to make quick decisions and the best at being a team player. Positions that we seek may include chemical operators, supervisors, chemists, engineers, and salespersons. We have multiple openings for our “Engineering Intern” position for the “Spring Semester” beginning January 12, 2026 until May 8, 2026. This position will primarily be based out of our Columbus, Ohio plant with some travel to support our Detroit, Michigan facilities. Summary: We are seeking self-motivated engineering students to join our team for a full-time intern experience in which students will have the opportunity to work hands-on with other engineers, operations, maintenance, and safety teams in a manufacturing environment. This intern position offers an excellent opportunity to engage in a true engineering role in which interns are provided with the opportunity to learn meaningful skills while also adding value to the organization. Interns will have the opportunity to assist with Operations, Maintenance, and Engineering projects from defining project scope to timely execution. Responsibilities: Responsibilities will be dependent upon the needs of the business. These responsibilities allow interns to gain professional experience in areas such as, but not limited to the following: Engineering/Maintenance/Production Project Support Improving operator training program Updating and standardizing process safety information Processing historian data Create standardization of various maintenance related tasks Potential travel to new Detroit facility Requirements: Must work closely with Operators, Technicians, and Engineering resources in support of preventative maintenance work, production improvement projects, and quality or productivity improvements. Must collaborate with others to accomplish Departmental, Corporate and Facility goals. Must be able to multi-task and possess excellent organizational skills. Willingness to travel to our Detroit facility as needed. Engineering Interns should expect to work full-time during the semester with the opportunity to return for future semesters. Ideal candidates for our Engineering Intern position would be 2 nd or 3 rd year students majoring in Chemical Engineering, Mechanical Engineering, or Electrical Engineering. EOE M/F/D/V

Cleveland-Cliffs takes pride in offering a variety of opportunities for students and new graduates who have an interest in the steel industry and a passion for innovation and sustainability. We offer a best-in-class internship program in the industry and partner with many universities to provide co-op opportunities. Working beside industry-leading engineering and operational leaders, our interns/co-ops will create meaningful solutions to real-world problems. As an intern/co-op with Cleveland-Cliffs, you will build life-long professional connections and have the opportunity to be considered for future full-time employment. As a Quality Engineering Intern at Cleveland-Cliffs, the projects assigned will vary based on the intern's education level and plant location, but will generally reflect the duties outlined below. Summary of Responsibilities: Complete monthly safety inspections and safety observations for the Metallurgical Department. Work safely and assure plant safety policies are followed. Manage workflow in the mechanical and chemical test lab. Manage test equipment calibrations. Create new operating efficiencies to maintain the production, testing, and shipping of steel with a leaner workforce. Maintain Steelmaking spectrometer lab, calibration, and on-call support. Responsible for data-mining investigations with metallurgical grade performance, chemistry, scrap charges, etc. Responsible for Metallurgical grade maintenance and development. Manage 3rd party testing inspection. Maintain tracking of Steelmaking scrap, referral, and diversions. Responsible for Metallurgical investigations. Minimum Qualifications: Enrollment in Bachelor of Science program in the field of Materials Science, Metallurgy, Chemistry, or other related technical degree Completion of at least sophomore year of study by the summer of 2026 Applicants for this position must be currently legally authorized to work in the United States on a full-time basis. Cleveland-Cliffs Inc. is the largest flat-rolled steel company and the largest iron ore pellet producer in North America. The Company is vertically integrated from mined raw materials, direct reduced iron, and ferrous scrap to primary steelmaking and downstream finishing, stamping, tooling, and tubing. We offer an excellent total compensation package including competitive pay with variable compensation opportunity, health insurance, retirement plan, education assistance, paid time off and more. Cleveland-Cliffs Inc. is committed to working with and providing reasonable accommodation to individuals with disabilities. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the employment process, please send an e-mail to *************************** or call **************** and let us know the nature of your request and your contact information. Do not email your application materials to this email address. Application materials sent to this email address will not be considered. Cleveland-Cliffs Inc. is an equal opportunity employer - M/F/Veteran/Disability. We are a drug-free workplace and conduct pre-employment screening as a condition of employment.

Job DescriptionDescription: Design streets that move people-not just cars. At Toole Design, we're leading the way in creating safer, more connected communities through sustainable multimodal transportation design. We're looking for an Engineering Intern to join our Columbus team for summer 2026. If you're someone who's excited to support impactful roadway and active transportation projects that reflect our mission and values, this could be you! Why You'll Love Working Here We're not just another firm, we're a purpose-driven team of engineers, landscape architects, planners, and designers who believe streets should work for everyone. At Toole Design, you'll work alongside thought leaders and industry experts who are committed to mentoring and helping you grow your expertise. We offer: · A collaborative, inclusive culture where expertise thrives and your growth and advancement are actively supported · The chance to explore your interests, share your ideas and learn from experts in the field · Projects that improve lives through safe, inclusive design rooted in ethics, empathy, and equity · A community of interns across the country to learn from and collaborate with on shared projects while growing your technical skills What You'll Do At Toole Design, our paid internship program is designed to give you real experience with meaningful work. Over a typical schedule of 8-12 weeks, you'll be fully embedded in project teams alongside planners, engineers, and landscape architects-contributing to active projects from day one. Whether it's preparing graphics for a new intersection design, analyzing pedestrian survey data, or developing materials for a public meeting, you'll gain hands-on experience in multimodal transportation across a wide range of contexts, from roadway reconstructions and streetscapes to signature trail projects. We are targeting a salary range of $20 to $24 per hour for this position. Interns generally work 40 hours per week, four days in the office with the option to work from home on Fridays. All Toole Design offices are bikeable, walkable, and transit-friendly-just like the infrastructure we help design. Join Us. Make an Impact. We're proud to be an ENR Top 500 design firm with one of the lowest turnover rates in the industry. If you're ready to do meaningful work with a supportive, talented team-apply today. Applications close 1/6/25. The Chris Kelleher Memorial Fund honors Chris, our first intern in our Boston office. This fund provides interns with housing assistance, based on funds available and financial needs. Application information will be provided to all hired interns, in the spring. For more information about our internships please visit our Internships page. Have questions or to request assistance or accommodations? Contact ****************** or call ************, option 5. At Toole Design, we foster a collaborative culture and welcome people of all backgrounds to help build more inclusive communities. We strongly encourage applicants from underrepresented communities-women, people of color, LGBTQIA+, immigrants, first-generation college students/graduates, those with disabilities, and people at all the intersections in between-to apply. We're proud that women make up 50% of our managers and are committed to diverse leadership that reflects the communities we serve. Toole Design is a woman-owned, equal opportunity employer (EO/AA/VEV/Disabled employer). For more information about Toole Design, visit our website and follow us on LinkedIn, Instagram, or Facebook. Requirements: Open to undergrads (3rd year or higher), grad students, and recent graduates in civil engineering or a related field Ability to quickly pick up new concepts, skills, and programs Proficiency in Microsoft Office suite MicroStation or AutoCAD experience or willingness to learn Passion for active transportation

Cleveland-Cliffs takes pride in offering a variety of opportunities for students and new graduates who have an interest in the steel industry and a passion for innovation and sustainability. We offer a best-in-class internship program in the industry and partner with many universities to provide co-op opportunities. Working beside industry-leading engineering and operational leaders, our interns/co-ops will create meaningful solutions to real-world problems. As an intern/co-op with Cleveland-Cliffs, you will build life-long professional connections and have the opportunity to be considered for future full-time employment. As a Quality Engineering Intern at Cleveland-Cliffs, the projects assigned will vary based on the intern's education level and plant location, but will generally reflect the duties outlined below. Summary of Responsibilities: Complete monthly safety inspections and safety observations for the Metallurgical Department. Work safely and assure plant safety policies are followed. Manage workflow in the mechanical and chemical test lab. Manage test equipment calibrations. Create new operating efficiencies to maintain the production, testing, and shipping of steel with a leaner workforce. Maintain Steelmaking spectrometer lab, calibration, and on-call support. Responsible for data-mining investigations with metallurgical grade performance, chemistry, scrap charges, etc. Responsible for Metallurgical grade maintenance and development. Manage 3rd party testing inspection. Maintain tracking of Steelmaking scrap, referral, and diversions. Responsible for Metallurgical investigations. Minimum Qualifications: Enrollment in Bachelor of Science program in the field of Materials Science, Metallurgy, Chemistry, or other related technical degree Completion of at least sophomore year of study by the summer of 2026 Applicants for this position must be currently legally authorized to work in the United States on a full-time basis. Cleveland-Cliffs Inc. is the largest flat-rolled steel company and the largest iron ore pellet producer in North America. The Company is vertically integrated from mined raw materials, direct reduced iron, and ferrous scrap to primary steelmaking and downstream finishing, stamping, tooling, and tubing. We offer an excellent total compensation package including competitive pay with variable compensation opportunity, health insurance, retirement plan, education assistance, paid time off and more. Cleveland-Cliffs Inc. is committed to working with and providing reasonable accommodation to individuals with disabilities. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the employment process, please send an e-mail to *************************** or call **************** and let us know the nature of your request and your contact information. Do not email your application materials to this email address. Application materials sent to this email address will not be considered. Cleveland-Cliffs Inc. is an equal opportunity employer - M/F/Veteran/Disability. We are a drug-free workplace and conduct pre-employment screening as a condition of employment.

2026 GAYLOR ELECTRIC SUMMER INTERNSHIP PROGRAM - COLLEGE STUDENTS Whether you're a current student, recent graduate or a seasoned professional, you can experience meaningful career growth at Gaylor Electric. Combining access to industry-leading technical skill development and world-class, career-related professionalism training. Over the past three years, our program has welcomed students from 70+ high school and collegiate institutions. With over 200 students for our summer program, students are placed across the county at national Gaylor Electric locations and job sites. Sprinkled throughout the summer, students have access to resume development, interview prep, business best practices discussions, and professional headshots. This experience culminates with an academic capstone presentation or craft skills assessment. Why Gaylor Electric? Gaylor Electric's internship programming combines an opportunity for construction career exploration, the honing of technical skills, and robust professionalism. We offer positions in the Field, Manufacturing, Project Management, Engineering, BIM/VDC, Safety and Corporate roles such as Accounting, Human Resources, Education, Information Technology and Marketing. Students will not only develop skills in positions related to their academic field of study, but will do intense curation of their professional resumes, interview habits, networking skills, and professionalism approaches. They become valued members of the Gaylor Electric culture and learn what it means to hold a high-value, high-opportunity position in the trades. Our Summer Internship program is an 8-to-10-week paid opportunity. Your internship, at Gaylor Electric, can be the perfect opportunity to expand your knowledge outside of the classroom and apply the concepts and theories of your major field of study. The hands-on real-world experiences that you encounter during our internship program enable you to develop your potential and make key contacts for future networking. Use your internship to determine your interest level in certain career fields, get feedback from professionals regarding your strengths and weaknesses, and to further your education and expand your resume. Things we love to see in our Interns: Purpose, Resolve, Determination Positive impact and influence on others Grit - the ability to stick to it and get the job done Consistency and a strong work ethic Holds oneself accountable Customer focused Team spirit and collaboration Detail oriented and organized Strong communication skills About You: You're pursuing a degree that aligns with Gaylor Electric's needs: Construction Management Engineering (Architectural Engineering, Electrical, Civil and Construction) Occupational Health & Safety Business, Finance, Marketing, Accounting or any other related college or work-related experience Excited to visit and travel to new locations and projects Internship Benefits: On-the-job experience and training in your specific role Opportunity to work with some of the brightest and most talented people in the industry Paid internship Potential full-time employment opportunities in any of our locations Internship Locations: Indianapolis, IN; South Bend, IN; West Lafayette, IN; Columbus, IN; Louisville, KY; Columbus, OH; Cincinnati, OH; Nashville, TN; Huntsville, AL; Atlanta, GA; Charlotte, NC; Fort Myers, FL; Orlando, FL; Tampa, FL GAYLOR ELECTRIC, INC. is an equal opportunity employer including disability and vets.

2026 ODNR Paid Summer Internship- Engineering/Surveyor Majors- Akron, Columbus, McArthur & New Philadelphia, Ohio (250007TC) Organization: Natural ResourcesAgency Contact Name and Information: *************** or ************Unposting Date: Dec 8, 2025, 11:59:00 PMWork Location: DNR Vinton 29371 Wheelabout Road McArthur 45651Primary Location: United States of America-OHIO-Franklin County-ColumbusOther Locations: United States of America-OHIO-Vinton County-McArthur, United States of America-OHIO-Tuscarawas County-New Philadelphia, United States of America-OHIO-Summit County-Akron Compensation: $16.00Schedule: Part-time Classified Indicator: UnclassifiedUnion: Exempt from Union Primary Job Skill: InternshipTechnical Skills: InternshipProfessional Skills: Active Learning, Critical Thinking, Customer Focus, Verbal Communication, Observation Agency OverviewWho we are:Did you know Ohio operates 76 state parks, manages over 750,000 acres of diverse wildlife land and more than 2 million acres of water? That's just the tip of the iceberg of what we do at the Ohio Department of Natural Resources (ODNR) as we seek to ensure a balance between wise use and protection of our natural resources for the benefit of all!Across our 12 divisions and support services, we employ office staff, law enforcement officers, geologists, biologists, engineers, attorneys, communicators, managers, and so much more. Whatever your passion, we likely have a position to fit it and pathways for advancement!Working at ODNR is a special experience. Our employees are afforded opportunities to participate in public events at parks, nature preserves, wildlife areas, and annually at the Natural Resources Park at the Ohio State Fair! We routinely have Lunch and Learn events at our Assembly Center which are streamed on Teams Live as are monthly updates with our Director.Job DescriptionApplications for the 2026 Ohio Department of Natural Resources Summer Internship Program are currently being accepted for positions in Akron, Columbus, McArthur and New Philadelphia Ohio, and from students of Engineer/Surveyor disciplines.What we need: We are seeking energetic, passionate people who enjoy the outdoors and want to play a key role for the position of 2026 ODNR Paid Summer Intern. The Ohio Department of Natural Resources (ODNR) offers some of the most diverse career opportunities in state government. Opportunities expand well beyond parks and recreation. The team of biologists, geologists, naturalist, forestry, wildlife and fisheries employees, just to name a few, helps the department fulfill its responsibility to manage and protect some of Ohio's most critical resources - forests, rivers, breath-taking natural areas, shorelines and islands, astounding geologic formations, wildlife, oil, gas, minerals and water resources. About the ODNR Summer Internship What you will do:Assist with infrastructure assessments and construction projects.Conduct on-site observations, prepare field reports and evaluate documents prepared by consultants.Participate in field investigations, assist with development of plans and help with inspections.Work closely with engineers on hydrology, grading and pipe design.Develop Standard Drawings alongside team members.Gain a comprehensive knowledge of what the Department does and why.Have access to unique professional development and training opportunities.Play a role in ensuring a balance between wise use and protection of Ohio's natural resources for the benefit of all. ODNR seeks applicants from a wide variety of academic majors, including, but not limited to:Engineer/Surveyor: architectural, civil, environmental, geological, mechanical, mining, petroleum, engineering technology An ODNR internship offers:Hands-on, practical experience Flexible hours The option to gain school creditA safe, inclusive, respectful workplace ODNR Core Values:Do The Right Thing, The Right WayPromote Science-Based StewardshipIf It's Worth Doing, It's Worth Doing NowStrive for Excellence in Customer ServiceCommit to Great Communication Why Work for the State of OhioAt the State of Ohio, we take care of the team that cares for Ohioans. We provide a variety of quality, competitive benefits to eligible full-time and part-time employees*. For a list of all the State of Ohio Benefits, visit our Total Rewards website! Our benefits package includes: Medical Coverage Free Dental, Vision and Basic Life Insurance premiums after completion of eligibility period Paid time off, including vacation, personal, sick leave and 11 paid holidays per year Childbirth, Adoption, and Foster Care leave Education and Development Opportunities (Employee Development Funds, Public Service Loan Forgiveness, and more) Public Retirement Systems (such as OPERS, STRS, SERS, and HPRS) & Optional Deferred Compensation (Ohio Deferred Compensation) *Benefits eligibility is dependent on a number of factors. The Agency Contact listed above will be able to provide specific benefits information for this position.QualificationsCandidates meeting the following criteria are eligible to apply: Enrolled as a part-time or full-time student, in an Engineer/Surveyor related major, at an accredited college, university, or community college which offers or leads to an associate, bachelor, or graduate degree.Good academic standing (2.5 GPA or higher) Applicants will be required to submit a resume and writing sample with their application. (A writing sample can be a research paper or writing assignment from a previous job or class and is, generally, one to two pages in length. The topic of the writing sample is up to the applicant but should be relevant to the internship to which the applicant is seeking) Job Skills: Internship, Active Learning, Customer Focus, Verbal Communication, Critical Thinking, Observation Supplemental InformationPlease ensure your online application clearly indicates how you meet minimum qualifications (MQs). Transcripts are required for all coursework, degrees or educational accomplishments claimed on the application. Applicants must submit a transcript (can be unofficial until point of selection) by the posting deadline (attach in the Additional Attachments section of the application submission Step 6). Should you have issues attaching, please email to: ***************. "See resume" is not a substitution for completing supplemental questions. Answers to the supplemental questions must be supported by the work experience/education sections of the application. Applications that fail to demonstrate how they meet minimum qualifications will not be considered.To request a reasonable accommodation due to a disability please contact Mohammad Yakubu, EEO Regional/Program Administrator at ************ or mohammad.yakubu@dnr.ohio.gov.Effective July 1, 2015 applicants must apply online for positions at all state agencies except the Department of Developmental Disabilities (DODD).The final candidate selected for the position will be required to undergo a criminal background check. Criminal convictions do not necessarily preclude an applicant from consideration for a position. An individual assessment of an applicant's prior criminal convictions will be made before excluding an applicant from consideration.STATUS OF POSTED POSITIONS: Applicants can view the status of this position by logging into their Ohio Hiring Management System [OHMS] user profile at careers.ohio.gov, and selecting "My Profile".Please do not upload attachments that have an anomaly or are password protected.ADA StatementOhio is a Disability Inclusion State and strives to be a model employer of individuals with disabilities. The State of Ohio is committed to providing access and inclusion and reasonable accommodation in its services, activities, programs and employment opportunities in accordance with the Americans with Disabilities Act (ADA) and other applicable laws.Drug-Free WorkplaceThe State of Ohio is a drug-free workplace which prohibits the use of marijuana (recreational marijuana/non-medical cannabis). Please note, this position may be subject to additional restrictions pursuant to the State of Ohio Drug-Free Workplace Policy (HR-39), and as outlined in the posting.