SunSource jobs

About the Role: The Chief Estimator is responsible for planning, coordinating and directing the Estimating team for various electrical construction projects. This includes administering operating budgets, staffing, work assignments, salary and performance reviews. The Chief Estimator will also support and administer all department standards and procedures as well as be responsible for the final review and approvals of estimate packages. The Chief Estimator will coordinate with the Operations Manager and Division Manager for the selection of projects to pursue. Company Overview With roots dating to 1891 and 7,900+ employees, MYR Group is a publicly traded holding company of specialty electrical construction companies. MYR Group and our subsidiaries work on large-scale electrical construction projects throughout the U.S. and Canada. We are contributing to a clean energy future while fostering a safe, supportive, and inclusive work environment. Our culture is built on shared values and mutual respect, where teamwork and collaboration occur naturally. Throughout our history, we have partnered with utilities, municipalities, commercial clients, and developers to deliver some of the largest and most notable projects including transmission/distribution/substation, commercial and industrial, storm restoration, and renewable (solar and wind farms) energy. We are consistently recognized as one of the top five specialty electrical construction firms by Engineering News Record and were recently named to Fortune's 2020 list of 100 Fastest-Growing Companies. Essential Functions Take on leadership functions within the Estimating department Review and evaluate requests for estimates, proposals and/or qualifications Prepare weekly bid calendar and ensure timely completion of estimates Review estimates and revisions for completeness and accuracy Maintain and improve precision database Develop and maintain cost data, including labor and equipment rates, installation methods and production rates Develop and maintain estimating procedures and guidelines Prepare reports as needed Set departmental budget Determine constructability requirements Lead, direct, and audit the work of assigned staff; act as a mentor Advise staff of company policy expectations Coordinate employee performance reviews Develop and maintain relationships with existing and new clients May develop training requirements for the estimating staff Regular and predictable attendance Other duties as assigned Essential functions of this position are to be performed in a Company-designated office or field location Understand and comply with the Company's Code of Business Code of Business Conduct and Ethics Policy and other industry-specific professional and ethical standards About You: Qualifications Previous experience as a Lead or Senior level Estimator 10+ years of experience within the construction industry Bachelor's degree in Engineering, Construction Management or related field; combination of relevant education and experience considered in lieu of degree Knowledge/Skills/Abilities Working knowledge of the N.E.C. and local codes Proficiency with Microsoft Office applications and estimating software Team player with excellent analytical, organizational and communication skills Ability to read and understand civil, architectural, structural, mechanical, etc. plans and specifications to include blueprints, proposals and other documents What We Offer: Compensation & Benefits Compensation commensurate with experience, paid weekly. Posted salary ranges are made in good faith. MYR Group reserves the right to adjust ranges depending on the qualifications of the selected candidate. Two days per week remote work option for non-field roles depending on position and performance. Medical, Basic Vision, Regenexx, Teledoc, Hearing, Mental Health (Low deductibles and out-of-pocket maximums) - $15 weekly premium for employee or employee plus family coverage. Dental - 100% employer-paid premium. ThrivePass Health & Wellness Reimbursement Program - $250 quarterly, $1,000 annually for health and wellbeing-related purchases. Annual Paid Time Off starting at 15 days plus 10 paid Holidays (Cultural Celebration Day is a floating holiday). Generous 401(k) Plan with 100% match up to 6%; immediate vesting, and Annual profit-sharing potential. Superior educational assistance program (support for educational costs, internal training, and more!). Company-paid short and long-term disability, life, and accidental death & dismemberment. Company-paid business travel accident insurance. Employee Assistance Plan (EAP). Various voluntary plans available including supplemental vision, accident and critical illness, ID theft, group legal, group auto & home, and additional voluntary life insurance plans for employees and dependents. Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at **************. MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. Appcast: #apphigh LinkedIn Recruiter Assignment (your initials): #LI-JS2 LinkedIn Workplace: #LI-Onsite

About the Role: The Sr. Field Mechanic with MYR Group you'll travel to project sites across the designated service area, supporting our field teams. You'll use your skills to perform maintenance, preventive maintenance, and minor equipment repairs safely and professionally. Every day, you can improve and challenge yourself, and if you have the desire and ambition, you'll have the potential to work toward higher-level roles in our Fleet Department. Like every team member, we will rely on you to provide exceptional customer service to internal customers. Location Details:This position will ideally be located in Troutdale, OR. Travel Details: This position requires travel throughout Northern California, Oregon, and Washington states, (including overnight) to project locations, supporting teams to ensure successful operation of the equipment. At times, the Mechanic will be required to respond to emergencies outside regular work hours and work overtime including weekends and holidays. A company vehicle and fuel card will be provided. When travel is required, meals and lodging will also be provided. Company Overview With roots dating to 1891 and 8,500+ employees, MYR Group is a publicly traded holding company of 13 specialty electrical construction companies. MYR Group and our subsidiaries work on large-scale electrical construction projects throughout the U.S. and Canada. We contribute to a clean energy future while fostering a safe, supportive, and inclusive work environment. Our culture is built on shared values and mutual respect, where teamwork and collaboration occur naturally. Throughout our history, we have partnered with utilities, municipalities, commercial clients, and developers to deliver some of the largest and most notable projects including transmission/distribution/substation, commercial and industrial, storm restoration, and renewable (solar and wind farms) energy. Essential Functions Perform mechanic assignments using independent judgment to make decisions requiring the application of procedures and practices to specific work situations Perform a full range of servicing and repairs on various types of fleet equipment, including malfunctioning parts and systems. Ensure compliance with manufacturer guidelines and company schedules Frequently travel to customer job sites for repair/maintenance of equipment. Must maintain service vehicle in a clean and professional manner May provide oversight for less experienced mechanics Perform routine and preventive maintenance, inspections, and repairs Identify mechanical problems either visually or with computer diagnostic equipment Maintain records of time and materials used on each job, the condition of the equipment, and the repairs performed Track information in computer software; ensure repair orders and weekly timesheets are complete and accurate Conduct safety inspections of equipment and prepare safety documentation Work in accordance with DOT, Environmental Protection Agency (EPA), Interstate Authority, Occupational Safety and Health Administration (OSHA), and other rules and regulations as required Participate in training programs; maintain and update safety skills and knowledge; keep current with hazardous material training requirements Other duties as assigned Regular and predictable attendance Essential functions of this position are to be performed at a Company-designated office or field location Understand and comply with the Company's Code of Business Conduct and Ethics Policy and other industry-specific professional and ethical standards About You: Qualifications Must have five years of experience in general heavy truck repair, automotive repair, or equipment repair; equivalent trade school/technical school time may be applied toward this requirement OR have completed a vocational/technical school program or apprenticeship in vehicle and equipment repair and have four years of experience. Must be capable of operating company vehicles and equipment on a daily basis. Clean Motor Vehicle Record (MVR) and good DAC Report. A valid Class B Commercial Driver License (CDL) is desired but not required. Must be at least 18 years of age. High School Diploma or equivalent preferred but not required. Knowledge/Skills/Abilities Must be reliable and have a strong work ethic Proven ability to work independently and without direct supervision Good teamwork skills to work effectively with coworkers Ability to communicate effectively to converse with employees, read orders and work instructions, and make accurate entries in the daily log Basic computer or data entry skills Solid experience using mechanical tools, materials, and testing equipment Solid knowledge of design, adjustment, operation, maintenance, and repair of vehicles and equipment Ability to follow posted safety rules and safe operating procedures Good understanding of applicable regulatory guidelines and rules Physical Requirements/Working Conditions Must be reliable and have a strong work ethic Proven ability to work independently and without direct supervision Good teamwork skills to work effectively with coworkers Ability to communicate effectively to converse with employees, read orders and work instructions, and make accurate entries in the daily log Basic computer or data entry skills Solid experience using mechanical tools, materials, and testing equipment Solid knowledge of design, adjustment, operation, maintenance, and repair of vehicles and equipment Ability to follow posted safety rules and safe operating procedures Good understanding of applicable regulatory guidelines and rules What We Offer: Compensation & Benefits Salary $66,560-$83,200 / year Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. MYR Group reserves the right to adjust ranges depending on the qualifications of the selected candidate. Medical, Basic Vision, Regenexx, Teledoc, Hearing, Mental Health (Low deductibles and out-of-pocket maximums) - $15 weekly premium for employee or employee plus family coverage. Dental - 100% employer-paid premium. ThrivePass Health & Wellness Reimbursement Program - $300 quarterly, $1,200 annually for health and wellbeing-related purchases. Annual Paid Time Off starting at 15 days plus 10 paid Holidays (Cultural Celebration Day is a floating holiday). Generous 401(k) Plan with 100% match up to 6%; immediate vesting, and Annual profit-sharing potential. Superior educational assistance program (support for educational costs, internal training, and more!). Company-paid short and long-term disability, life, and accidental death & dismemberment. Company-paid business travel accident insurance. Employee Assistance Plan (EAP). Various voluntary plans available including supplemental vision, accident and critical illness, ID theft, group legal, group auto & home, and additional voluntary life insurance plans for employees and dependents. Tool/boot allowance ($250 per quarter). Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at **************. MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. Appcast: #apphigh LinkedIn Recruiter Assignment (your initials): #LI-JS1 LinkedIn Location Expansion #: #nw LinkedIn Workplace: #LI-Onsite

US LBM is one of the leading and fastest growing distributors of specialty building materials in the United States, with a team of over 15,000 employees located throughout the country. Since our founding in 2009, we have acquired over 70 companies and have expanded to more than 500 locations serving 37 states. US LBM is a progressive organization that promotes a unique culture that focuses on the value of its customers and associates. Developing our people is critical to our strategy and fostering our culture of empowerment. Job Posting A Brief Overview The CDL Driver II is responsible for the safe, efficient transportation of materials to various job sites and other locations. This role requires maintaining a Class A or B Driver's license, inspecting and maintaining trucks, reporting shortages and claims to supervisors, and assisting in loading and storing of materials. Drivers must perform pre- and post-trip inspections, manage logs, and adhere to hours-of-service requirements. The CDL Driver II is typically a more experienced driver who may train new associates. What you will do Operates Class A commercial vehicles in a safe, compliant, and efficient manner. Responsible for deliveries to both active construction sites and completed build locations; city-based deliveries and inter-state travel may be required. Performs thorough pre-trip and post-trip DOT inspections to ensure vehicle safety and compliance with federal regulations. Provides exceptional customer service by maintaining a professional demeanor, addressing client needs, representing the company positively during all interactions, and relaying messages received from customers while on job sites. Organizes and secures loads to ensure safe transport and verifies orders for accuracy before departure and upon delivery. Adheres to all regulations and safety guidelines established by the U.S. Department of Transportation (DOT) and complies with all regulations and conditions outlined in applicable permits. Prepares and maintains accurate DOT-compliant logs of driving hours, on-duty time, and rest periods in accordance with federal regulations. Delivers and unloads materials accurately and safely, ensuring customer satisfaction at the point of delivery. Records all merchandise returned by truck and assists in unloading materials returned for credit, ensuring proper documentation and handling. Safely and efficiently operates a truck-mounted forklift to load, unload, and transport materials at job sites. Maintains the cleanliness and organization of the truck, ensuring it is well-kept and ready for operation. Assist with stocking and organizing inventory in the warehouse and production areas. Trains and mentors incoming drivers on company policies, safety procedures, and operational best practices. Required For All Jobs Perform other duties as assigned. Comply with all policies and standards. Adheres to Company's commitment to workplace safety. Education Qualifications High School or general equivalency degree (GED) required. Experience Qualifications 3+ years CDL experience preferred. Experience transporting and handling lumber and building materials required. Skills and Abilities Ability to do basic math, read orders, write instructions and complete forms. Ability to effectively and professionally communicate with customers, other employees and supervisors using verbal and written skills. Ability to deal constructively with conflict and recognize potential problems. Maintain current operator's license and meet company driver qualification requirements. Knowledge and ability to use safe lifting techniques. Proficiency with or ability to learn current technologies (e.g. Smartphone, GPS and other necessary business applications). Ability to collaborate effectively with staff, dispatchers, and other drivers to ensure smooth operations and timely deliveries. Knowledge and understanding of federal DOT regulations, logbook requirements, and HOS compliance. Skills demonstration: Special product handling, access to tight spaces, residential deliveries, demonstrate proficiency with equipment operations. Demonstration of leadership (three out of four required): Mentor new associates Willingness to train others Safety committee engagement Participation in US1 Continuous Improvement project Licenses and Certifications Class A CDL License or Class B CDL License required. Additional Potential Opportunities based on experience: CDL Driver II CDL Long haul CDL Wide Load CDL Driver Boom Crane Non-CDL Driver I Non-CDL Driver II US LBM Holdings, LLC, is an equal-opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, military status, order of protection status, or any other legally recognized protected basis under federal, state, or local law.

Mid-Cape Home Centers traces its roots back to 1895, and today supplies professional builders, remodelers and homeowners in Massachusetts' South Shore, Cape Cod and the Islands with lumber and specialty building materials from its six locations in the southern coastal region of Massachusetts. A Brief Overview The Outside Sales Representative generates and secures new sales to increase the profitability of the company. This position maintains existing accounts while generating new business through cold calls and following leads. What you will do Promote, sell, and secure new accounts for the company. Provide existing accounts with necessary products, time, and information. Assist with the selection of products best suited to customer needs. Prepare, coordinate, and communicate price quotations, terms of sales, delivery dates, and service obligations to customers/contractors. Resolve customer complaints and problems. Assist in the collection of accounts receivable. Coordinate project schedules, contractor schedules, and material deliveries. Prepare and input orders as necessary. Informs company of competitive prices, products, and area-related information. Maintain current knowledge of daily and monthly sales and their relationship to budget and margin goals. Research and order special products as necessary. Estimate materials from blueprints supplied by customer/contractor. Adhere to Conflict of Interest or Non-Compete agreement if in place. Comply with Company's attendance policy by maintaining regular and predictable attendance. Required For All Jobs Perform other duties as assigned. Comply with all policies and standards. Adheres to Company's commitment to workplace safety. Education Qualifications High School Diploma or GED required. Experience Qualifications 3 years of sales experience in building materials or related industry required. Skills and Abilities Working knowledge of building materials industry and products, ability to negotiate prices and contractual agreements. Estimating from blueprints, ability to use calculator and computer. Strategic Mindset - Seeing ahead to future possibilities and translating them into breakthrough strategies. Plans and Aligns - Planning and prioritizing work to meet commitments aligned with organizational goals. Business Insight - Applying knowledge of business and the marketplace to advance the organization's goals. Collaborates - Building partnerships and working collaboratively with others to meet shared objectives. Communicates Effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences. Must be able to walk throughout yards, plants, and offices. Licenses and Certifications DL NUMBER - Driver License, Valid and in State required upon hire. Travel Requirements 50% Travel. Mid-Cape , a Division of US LBM Holdings, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, military status, order of protection status, or any other legally recognized protected basis under federal, state, or local law.

This role is not open for submissions from outside staffing agencies Plant Manager We are actively seeking a Plant Manager for our New Berlin, WI facility. The Plant Manager will direct and manage plant operations with overall responsibilities for Production, Maintenance, Quality, Safety, Inventory and Cost Control, Logistics, and other production-related activities. We are growing at a tremendous rate which presents a fantastic opportunity to join our company and achieve long-term career goals. WHO YOU ARE: A Change Management Leader, a Team Builder with a focus on Safety, who is Goal Oriented and has a Servant Leadership work style. The Plant Manager is responsible for: Directing and managing plant operations for production, maintenance, quality, and shipping and receiving. Setting production goals, monitoring, and managing all aspects of production. Implementing cost effective systems of control over capital, operating expenditures, workforce, wages, and effective use of labor. Managing capital asset maintenance. Establishing and monitoring overall plant performance for production and quality standards. Controlling and minimizing labor overtime, premium freight, and repair expenses. Maintaining, adjusting, or replacing existing plant facilities and equipment when necessary. Providing leadership and training to accomplish the company goals and objectives. Implementing and maintaining preventative maintenance programs. Incorporating shop floor organization and plant cleanliness processes. Providing direction, development, and leadership to production supervisors. Managing and monitoring branch safety conditions to ensure full OSHA compliance and to reduce the incidence of work-related injury to employees. Communicating regularly with senior management and support functions. SKILLS YOU BRING: 5 years manufacturing experience with minimum 3 years supervisory experience in a GLASS fabrication environment Bachelor's degree or combination of education and experience Business finance acumen and P&L knowledge/experience Background with manufacturing methods, process improvement programs and procedures including Lean manufacturing techniques required Must have excellent follow through and communication skills with the ability to prioritize tasks and manage multiple assignments Production and Capacity Planning Background WHY CHOOSE US: We offer the most comprehensive benefit coverage in the industry. We give our employees immediate access to health, dental, vision and life insurance benefits, as well as provide short/long-term disability coverage to protect you financially if injured on the job. We are pleased to offer a comprehensive wellness initiative that includes access to a percentage of your pay daily, if needed, and a progressive financial training program. Stay with us for a year and your 401k employer match is 100% vested and immediately becomes part of your ever improving financial plan. This is also true for those who select and contribute to their Health Savings Account. We match on both employee and family coverage to help cover out-of-pocket expenses and if unused continues to grow until needed. The employer match for your HSA, if you choose to participate, is also vested immediately at 100%, improving your financial health. We bear most of the cost of your benefits. We structured these benefits because we care not only about your physical well-being but your financial health and welfare too. Let us show you we value you as an employee and how we will help you achieve financial independence. We are one of North America's largest fabricator and distributors in our industry, with many facilities throughout the United States and Canada. With its unmatched product line, we have created a Total System Approach to satisfy virtually any customer requirement. We have the products, equipment, and an experienced team to take projects from design concepts with the architect to final installation by the contractor. We are an Equal Opportunity Employer. We embrace and encourage our employees' differences in age, color, disability, ethnicity, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socioeconomic status, veteran status, and other characteristics that make our employees unique.

SES Construction is seeking a highly motivated and experienced Project Manager/Superintendent to join our team in Fulton, Missouri. This position requires a construction professional with a strong foundation in field operations combined with excellent organizational and digital skills. You will be responsible for overseeing projects from initiation through completion, ensuring quality, safety, and adherence to schedule and budget. Key Responsibilities As a Project Manager/Superintendent, your responsibilities will blend on-site leadership with office-based management tasks: Project Oversight & Management: Serve as the primary point of contact and authority for assigned projects, ensuring they are completed on time and within budget. Direct and coordinate all on-site construction activities, including managing subcontractors, suppliers, and SES personnel. Develop, maintain, and enforce project schedules and work breakdown structures. Field Supervision & Quality Control: Maintain a safe, secure, and healthy work environment by enforcing site safety standards and company policies. Supervise and inspect all work to ensure it meets SES quality standards, project specifications, and local building codes. Resolve day-to-day issues on the job site quickly and effectively to prevent delays. Administrative & Computer Skills: Utilize construction management software (e.g., scheduling, project tracking, and documentation platforms) for daily reporting, progress tracking, and communication. Manage and process project documentation, including submittals, RFIs (Requests for Information), change orders, and daily logs, leveraging strong computer skills. Conduct regular project meetings with subcontractors, design teams, and clients. Financial & Resource Management: Assist in the preparation of project cost estimates and monitor project costs to identify and mitigate variances. Coordinate the delivery and storage of necessary materials, tools, and equipment. Qualifications Experience: Proven experience in commercial or residential construction, preferably in a combined Project Manager and Superintendent role. Ideal candidates will have practical experience and a comprehensive understanding of construction methods, techniques, and procedures. Technical Skills: Demonstrated proficiency with computer skills and construction management software (e.g., Bluebeam, Ebuilder, etc). Ability to read, interpret, and work from blueprints, specifications, and project documents. Knowledge: Strong understanding of current building codes, safety regulations (OSHA), and quality control standards. Soft Skills: Excellent organizational skills with the ability to manage multiple tasks and priorities effectively. Strong leadership, communication, and interpersonal skills, capable of effectively managing diverse teams and communicating with clients and vendors. Education: High School Diploma or GED required; a degree in Construction Management, Engineering, or a related field is a plus.

About the Role: The Telematics System Analyst is responsible for coordinating all Telematics activities for the Fleet organization. This includes managing hardware installation, reporting requests, driver compliance of logging requirements, geofence management, fuel and mileage reporting for IFTA and IRP, safety alert reporting, and system user management activities. Company Overview With roots dating to 1891 and 8,500+ employees, MYR Group is a publicly traded holding company of 13 specialty electrical construction companies. MYR Group and our subsidiaries work on large-scale electrical construction projects throughout the U.S. and Canada. We contribute to a clean energy future while fostering a safe, supportive, and inclusive work environment. Our culture is built on shared values and mutual respect, where teamwork and collaboration occur naturally. Throughout our history, we have partnered with utilities, municipalities, commercial clients, and developers to deliver some of the largest and most notable projects including transmission/distribution/substation, commercial and industrial, storm restoration, and renewable (solar and wind farms) energy. Essential Functions Device installation and maintenance Manage new device installations Activate and terminate devices Set up and maintain user profiles Troubleshooting Identify non-communicating devices; build appropriate work orders for correction Investigate mileage and hours differences between Fleet data and Telematics Investigate public complains and provide reports Telematics system administration Provide various reports including alerts Reconcile monthly invoicing Ensure ignition sequences are collected on equipment Ensure aerial components collect PTO measurements Develop & deliver employee training on Telematics Any other activities necessary to assist in maintaining accurate and useful Telematics data Regular and predictable attendance Other duties as assigned Essential functions of this position are to be performed at a Company-designated office or field location Understand and comply with the Company's Code of Business Conduct and Ethics Policy and other industry-specific professional and ethical standards About You: Qualifications 1 to 3 years of experience working with Telematics software application Prior experience providing Telematics training and support to users Analytics and reporting experience related to Telematics data Bachelor's or Associate's degree in Information Technology, Computer Science, Business or comparable field preferred; or equivalent combination of education and experience Knowledge/Skills/Abilities Good verbal and written communication skills Good analytical thinking skills Detail oriented with strong problem-solving skills Time management skills Proficiency in MS Office Suite Ability to maintain confidentiality Working knowledge of Fleet operations What We Offer: Compensation & Benefits Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. MYR Group reserves the right to adjust ranges depending on the qualifications of the selected candidate. Two days per week remote work option for non-field roles depending on position and performance. Medical, Basic Vision, Regenexx, Teledoc, Hearing, Mental Health (Low deductibles and out-of-pocket maximums) - Fifteen Dollar weekly premium for employee or employee plus family coverage. Dental - 100% employer-paid premium. ThrivePass Health & Wellness Reimbursement Program - Twelve hundred dollars annually for health and wellbeing-related purchases. Annual Paid Time Off starting at 15 days plus 10 paid Holidays (Cultural Celebration Day is a floating holiday). Generous 401(k) Plan with 100% match up to 6%; immediate vesting, and Annual profit-sharing potential. Superior educational assistance program (support for educational costs, internal training, and more!). Company-paid short and long-term disability, life, and accidental death & dismemberment. Company-paid business travel accident insurance. Employee Assistance Plan (EAP). Various voluntary plans available including supplemental vision, accident and critical illness, ID theft, group legal, group auto & home, and additional voluntary life insurance plans for employees and dependents. Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at **************. MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. Appcast: #apphigh LinkedIn Recruiter Assignment (your initials): #LI-JS1 LinkedIn Location Expansion #: #IN LinkedIn Workplace: #LI-Hybrid

Kelly is seeking a Senior Scheduling Specialist to join with our prestigious client in Port Lavaca, Texas 77979 & Houston TX 77077. Title: Senior Scheduling Specialist This role is a contract role: 12+ months Onsite work at Port Lavaca, Texas 77979 & Houston TX 77077. Pay range: $55-$66/hr Job description The Senior Construction Scheduling Specialist acts as a technical resource for Scheduling within the Global Project Methodology (GPM) work process and supports establishment of the overall construction schedule baseline and reporting to monitor and control the construction activities within established tolerances of the baseline supporting efficient project execution. In this role you coordinate data inputs from the various construction contractors and internal disciplines to ensure accurate forecasts and reporting of schedule and engage the project steering team to understand causes of the deviation and the need to establish actions to mitigate, where deviations from established tolerances occur. Requires expanded conceptual and practical knowledge in own job discipline and broadens capabilities. Responsibilities / Duties • Recommendations on cycle time reduction opportunities and techniques • Develops and maintains comprehensive integrated master project schedules including Detail Design, Procurement, Construction and Start-up/Commissioning Project Stages. • Utilizes project cost estimates to resource load project schedules and gain alignment with estimated scope of work and the project schedule. • Recommendations on cycle time reduction opportunities and techniques • Performs staffing density checks or staffing limitation checks to validate schedule durations and ensures resource-level supports the project strategy. • Leads project teams in forecasting schedule challenges and offers analyses and solutions to complete the project on schedule. • Performs critical path analysis to determine problem areas in regard to project schedule and resource overloads and offers alternative courses of action to the project team. • Evaluates project deviations to assess schedule impact for proper decision making and recovery plans. • Applies established schedule management practices to ascertain critical schedule issues and recommend corrective actions. Experience • Practical experience as a scheduler working for a large main construction contractor in coordinating multiple subcontractors (e.g. in coordination of civil, structural steel, piping, insulation and scaffolding etc • Assist in developing and maintaining comprehensive integrated master project schedules including Front-end Loading, Detail Design, Procurement, Construction and Start-up/Commissioning Project Stages. • Maintains construction schedule during the project life cycle monitoring progress and incorporating modifications where changes in the original scope occur or delays are encountered. • Leads project teams in forecasting schedule challenges and offers analyses and solutions to complete the project on schedule. • Evaluates project deviations to assess schedule impact for proper decision making and recovery plans. • Applies established schedule management practices to ascertain critical schedule issues and recommend corrective actions. • Assist in quantity tracking and installation rates • Performs quantity surveys to validate construction progress Required qualifications • A minimum of a bachelor's degree in any discipline or 10 years of experience in project controls, engineering, manufacturing, or related experience. A few points to highlight: - Experience can be between 7 to 15 years. - 40-hour work week as 5x8, with overtime based on project demand. - The individual must be on-site every day. Construction Scheduler with construction exposure/ P6 experience and worked in the site. Please apply to this role if you are a good fit for the role or share references

Wisconsin Building Supply operates locations throughout Wisconsin supplying windows, doors, roofing, siding, millwork, builders hardware, columns, trim, mouldings, cabinetry, countertops, decking, railing, gypsum, lumber & plywood, insulation, and additional building materials. A Brief Overview The CDL Driver I is responsible for the safe, efficient transportation of materials to various job sites and other locations. This role requires maintaining a Class A or B Driver's license, inspecting and maintaining trucks, reporting shortages and claims to supervisors, and assisting in loading and storing of materials. Drivers must perform pre- and post-trip inspections, manage logs, and adhere to hours-of-service requirements. Pay Range: $22.00-$27.00/hr. What you will do Operates Class A or B commercial vehicles in a safe, compliant, and efficient manner. Responsible for deliveries to both active construction sites and completed build locations; city-based deliveries and inter-state travel may be required. Performs thorough pre-trip and post-trip DOT inspections to ensure vehicle safety and compliance with federal regulations. Provides exceptional customer service by maintaining a professional demeanor, addressing client needs, representing the company positively during all interactions, and relaying messages received from customers while on job sites. Organizes and secures loads to ensure safe transport and verifies orders for accuracy before departure and upon delivery. Adheres to all regulations and safety guidelines established by the U.S. Department of Transportation (DOT) and complies with all regulations and conditions outlined in applicable permits. Prepares and maintains accurate DOT-compliant logs of driving hours, on-duty time, and rest periods in accordance with federal regulations. Delivers and unloads materials accurately and safely, ensuring customer satisfaction at the point of delivery. Records all merchandise returned by truck and assists in unloading materials returned for credit, ensuring proper documentation and handling. Safely and efficiently operates a truck-mounted forklift to load, unload, and transport materials at job sites. Maintains the cleanliness and organization of the truck, ensuring it is well-kept and ready for operation. Assist with stocking and organizing inventory in the warehouse and production areas. Required For All Jobs Perform other duties as assigned. Comply with all policies and standards. Adheres to Company's commitment to workplace safety. Education Qualifications High School Diploma or GED required. Experience Qualifications Basic CDL experience with flat beds and/or tractor trailers required. 1-2 years CDL experience preferred. Experience transporting and handling lumber and building materials required. Skills and Abilities Ability to do basic math, read orders, write instructions and complete forms. Ability to effectively and professionally communicate with customers, other employees and supervisors using verbal and written skills. Ability to deal constructively with conflict and recognize potential problems. Maintain current operator's license and meet company driver qualification requirements. Knowledge and ability to use safe lifting techniques. Proficiency with or ability to learn current technologies (e.g. Smartphone, GPS and other necessary business applications). Ability to collaborate effectively with staff, dispatchers, and other drivers to ensure smooth operations and timely deliveries. Knowledge and understanding of federal DOT regulations, logbook requirements, and HOS compliance. Licenses and Certifications Class A CDL License or Class B CDL License required. For Boom Crane CDL Driver positions - a Certified Drill Rig Operator-NCCCO Boom Certification preferred - maintain active accredited certification for equipment type (e.g. NCCCO, NCCER, CIC) preferred. Additional Potential Opportunities based on experience: CDL Driver II CDL Long haul CDL Wide Load CDL Driver Boom Crane Wisconsin Building Supply, a Division of US LBM Holdings, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, military status, order of protection status, or any other legally recognized protected basis under federal, state, or local law.

🚨 We're Hiring: Safety Supervisor 🚨 📍 Location: Ruther Glen, Virginia - Fredericksburg, VA | Industry: Civil Construction | Type: Full-Time | Exempt 👷 ♂️ Be the reason someone goes home safe every day. Are you a safety champion with a passion for protecting people, projects, and progress? At Total Civil Construction & Engineering, we're looking for a Safety Supervisor who leads from the front, inspires accountability, and transforms safety protocols into everyday habits. 🔧 What You'll Do: As a Safety Supervisor, you'll serve as the critical link between field crews and executive leadership, ensuring we don't just meet safety standards, we lead with them: Enforce corporate and project-specific safety and health programs Conduct detailed jobsite audits, safety walk-throughs, and risk assessments Develop and deliver safety training (fall protection, rigging, silica, confined space, GHS, etc.) Create, maintain, and verify site-specific documentation (AHAs, SDS, permits, etc.) Perform incident and accident investigations, collect evidence, interview, report, follow up Collaborate with foremen, PMs, superintendents, and subcontractors to ensure compliance Design advanced safety solutions for lifts, hazardous materials, excavation, and heavy equipment Track and manage training matrix, inspection forms, and safety schematics Stay up to date on OSHA, federal, and local regulations, and ensure we're ahead of the curve Mentor teams and foster a proactive, solution-oriented safety culture Attend daily briefings, safety stand-downs, and orientations across job sites Support WC/claims reporting, root cause analysis, and continuous improvement initiatives 🎓🧠 What You Bring: We're looking for someone who leads by example, trains with passion, and brings confidence to the chaos. Education & Certifications: Bachelor's degree in occupational health & safety, construction management, or related field OSHA 30-Hour Construction Industry (Required) OSHA 510 (Preferred) ASP and/or CHST (Preferred) First Aid/CPR Certification (Required) Fall Protection, Rigging, Confined Space, and Equipment Safety Training Experience & Skills: 2+ years of experience in field-level safety for construction projects Strong knowledge of underground utilities, buildings, and highway construction risks Bilingual English & Spanish - Preferred Proficiency in MS Office, Procore, and digital documentation systems Strong interpersonal skills, leadership presence, and ability to work independently Valid driver's license and clean driving record Must pass government background check and drug and alcohol test (for federal projects) 💼 Perks & Culture: Health, Vision, Dental, and Life Insurance Work with high-impact teams on major civil projects Vehicle, fuel card, PPE & tech tools provided Ongoing training, support & growth into Safety Manager Inclusive, collaborative, and safety-first company culture Drug-Free Workplace | EEO Employer: Veterans, Minorities, Women encouraged to apply

This role is ideal for someone who enjoys being hands-on in the shop, solving complex machining challenges, and helping drive smarter, more efficient CNC processes. You'll play a key role in developing and refining CNC programs, improving setup consistency, and supporting machinists and engineers on the floor-particularly in high-precision, multi-axis environments. What You'll Be Doing Develop, optimize, and support CNC programs for milling, turning, and grinding operations Create and validate toolpaths using CAD/CAM software and simulation tools Partner with machinists, manufacturing engineers, and tooling teams to improve setups, cycle times, and repeatability Establish machining best practices and standardized processes across departments Support prototype development, process trials, and new program rollouts Troubleshoot machining or programming-related quality issues and support corrective actions Assist with fixture, work-holding, and tooling strategy development Provide hands-on technical guidance and training to shop-floor personnel What They're Looking For 7+ years of CNC machining experience (mill, lathe, and/or grind) 5+ years of CNC programming experience in a production environment Strong Siemens NX experience required Familiarity with FANUC and Okuma controls preferred Experience with VERICUT or similar simulation software a plus Comfortable machining and programming superalloy materials Ability to read and interpret complex drawings and manufacturing documentation Why This Role High-precision, complex machining work (multi-axis, tight tolerances) Clean, climate-controlled manufacturing environment Strong emphasis on quality, safety, and continuous improvement Opportunity to influence machining standards and processes-not just write programs

K&K Global Talent Solutions Inc is an International recruiting agency that has been providing technical resources in the USA region since 1993. This position is with one of our clients in The USA, who is actively hiring candidates to expand their teams. Role: Techno - Functional Business Analyst Coupa Employment type: C2C Location: Mountain View CA Core BA (techno-functional) End-to-end BA ownership: requirements → process flows → FSD/ISD → dev clarifications → QA/UAT → post-go-live. Able to turn one-line business asks into detailed acceptance criteria & use cases. Strong SDLC exposure (story writing, grooming, traceability in Jira/Confluence). P2P expertise (primary) Proven Coupa P2P process knowledge (or equivalent like Ariba), multiple deployments as BA. Approval workflows, requisition→PO→invoice flows, supplier enablement at design/requirements level (not operational CSP invites). Techno-functional depth Can bridge Business ↔ Engineering: understands Coupa capabilities, data flows, and constraints to guide solutioning. Comfortable producing FSDs ( Functional Specification Document )/ISDs (Integration Specification Document), workflow diagrams, and parameter-level details needed by dev. ERP integration literacy ERP agnostic is fine; SAP S/4HANA preferred. Understands how Coupa integrates with ERP for POs, GR/IR, vendor/invoice data. Nice-to-haves CCW (contingent workforce) understanding (not hands-on config). Coupa certification (valued but not required). Data/KPI orientation (dashboards, measurement of adoption/ROI). Compliance/SOX awareness for P2P. Out of scope / Not required Procurement operations tasks (e.g., sending CSP invites, day-to-day supplier ops). Deep hands-on configuration/admin as a primary function. Use this checklist during screening calls and share the experience in Yrs Strong Coupa P2P BA experience Can write FSDs / ISDs / User Stories Can design approval workflows + exception paths Understand Coupa ↔ SAP integration at process level Has worked with Dev + QA teams in Agile Strong P2P business process knowledge

About the Role: The Sr. Field Mechanic with MYR Group you'll travel to project sites across the designated service area, supporting our field teams. You'll use your skills to perform maintenance, preventive maintenance, and minor equipment repairs safely and professionally. Every day, you can improve and challenge yourself, and if you have the desire and ambition, you'll have the potential to work toward higher-level roles in our Fleet Department. Like every team member, we will rely on you to provide exceptional customer service to internal customers. Location Details:This position will ideally be located in Troutdale, OR. Travel Details: This position requires travel throughout Northern California, Oregon, and Washington states, (including overnight) to project locations, supporting teams to ensure successful operation of the equipment. At times, the Mechanic will be required to respond to emergencies outside regular work hours and work overtime including weekends and holidays. A company vehicle and fuel card will be provided. When travel is required, meals and lodging will also be provided. Company Overview With roots dating to 1891 and 8,500+ employees, MYR Group is a publicly traded holding company of 13 specialty electrical construction companies. MYR Group and our subsidiaries work on large-scale electrical construction projects throughout the U.S. and Canada. We contribute to a clean energy future while fostering a safe, supportive, and inclusive work environment. Our culture is built on shared values and mutual respect, where teamwork and collaboration occur naturally. Throughout our history, we have partnered with utilities, municipalities, commercial clients, and developers to deliver some of the largest and most notable projects including transmission/distribution/substation, commercial and industrial, storm restoration, and renewable (solar and wind farms) energy. Essential Functions This is considered an advance-level skilled or career level position Perform mechanic assignments using independent judgment to make decisions requiring the application of procedures and practices to specific work situations Perform a full range of servicing and repairs on various types of fleet equipment, including malfunctioning parts and systems. Ensure compliance with manufacturer guidelines and company schedules Frequently travel to customer job sites for repair/maintenance of equipment. Must maintain service vehicle in a clean and professional manner May provide oversight for less experienced mechanics Perform routine and preventive maintenance, inspections, and repairs Identify mechanical problems either visually or with computer diagnostic equipment Maintain records of time and materials used on each job, the condition of the equipment, and the repairs performed Track information in computer software; ensure repair orders and weekly timesheets are complete and accurate Conduct safety inspections of equipment and prepare safety documentation Work in accordance with DOT, Environmental Protection Agency (EPA), Interstate Authority, Occupational Safety and Health Administration (OSHA), and other rules and regulations as required Participate in training programs; maintain and update safety skills and knowledge; keep current with hazardous material training requirements Other duties as assigned Regular and predictable attendance Essential functions of this position are to be performed at a Company-designated office or field location Understand and comply with the Company's Code of Business Conduct and Ethics Policy and other industry-specific professional and ethical standards About You: Qualifications Must have five years of experience in general heavy truck repair, automotive repair, or equipment repair; equivalent trade school/technical school time may be applied toward this requirement OR have completed a vocational/technical school program or apprenticeship in vehicle and equipment repair and have four years of experience. Must be capable of operating company vehicles and equipment on a daily basis. Clean Motor Vehicle Record (MVR) and good DAC Report. A valid Class B Commercial Driver License (CDL) is desired but not required. Must be at least 18 years of age. High School Diploma or equivalent preferred but not required. Knowledge/Skills/Abilities Must be reliable and have a strong work ethic Proven ability to work independently and without direct supervision Good teamwork skills to work effectively with coworkers Ability to communicate effectively to converse with employees, read orders and work instructions, and make accurate entries in the daily log Basic computer or data entry skills Solid experience using mechanical tools, materials, and testing equipment Solid knowledge of design, adjustment, operation, maintenance, and repair of vehicles and equipment Ability to follow posted safety rules and safe operating procedures Good understanding of applicable regulatory guidelines and rules Physical Requirements/Working Conditions Must be reliable and have a strong work ethic Proven ability to work independently and without direct supervision Good teamwork skills to work effectively with coworkers Ability to communicate effectively to converse with employees, read orders and work instructions, and make accurate entries in the daily log Basic computer or data entry skills Solid experience using mechanical tools, materials, and testing equipment Solid knowledge of design, adjustment, operation, maintenance, and repair of vehicles and equipment Ability to follow posted safety rules and safe operating procedures Good understanding of applicable regulatory guidelines and rules What We Offer: Compensation & Benefits Salary $66,560-$83,200 / year Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. MYR Group reserves the right to adjust ranges depending on the qualifications of the selected candidate. Medical, Basic Vision, Regenexx, Teledoc, Hearing, Mental Health (Low deductibles and out-of-pocket maximums) - $15 weekly premium for employee or employee plus family coverage. Dental - 100% employer-paid premium. ThrivePass Health & Wellness Reimbursement Program - $300 quarterly, $1,200 annually for health and wellbeing-related purchases. Annual Paid Time Off starting at 15 days plus 10 paid Holidays (Cultural Celebration Day is a floating holiday). Generous 401(k) Plan with 100% match up to 6%; immediate vesting, and Annual profit-sharing potential. Superior educational assistance program (support for educational costs, internal training, and more!). Company-paid short and long-term disability, life, and accidental death & dismemberment. Company-paid business travel accident insurance. Employee Assistance Plan (EAP). Various voluntary plans available including supplemental vision, accident and critical illness, ID theft, group legal, group auto & home, and additional voluntary life insurance plans for employees and dependents. Tool/boot allowance ($250 per quarter). Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at **************. MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. Appcast: #apphigh LinkedIn Recruiter Assignment (your initials): #LI-JS1 LinkedIn Location Expansion #: #nw LinkedIn Workplace: #LI-Onsite

The Business Operations Specialist/Legal Analyst plays a critical role in Legal & Compliance (L&C) Transformation and Operations team and is responsible for driving strategic process improvements and operational excellence across key legal operations functions. This role bridges tactical execution with strategic oversight, enabling cross-functional alignment and supporting client's commitment to ethical business practices. Key Responsibilities: Oversee daily operations across billing and invoicing, eDiscovery, request triage and broader legal support and ensure efficient workflows and timely resolution of inquiries Manage legal billing operations, including invoices and vendor onboarding; Act as a liaison between L&C and cross-functional partners, such as Procurement, Finance, and IT Build and maintain strong relationships with Outside Counsel partners and other legal vendors; Ensure alignment with preferred vendor guidelines to optimize external spending Execute eDiscovery requests and ensure accurate documentation, confidentiality, and compliance with internal protocols and regulatory requirements Triage and prioritize incoming requests using multiple dashboards and intake queues; Ensure timely resolution and high-quality service to key stakeholders Proactively identify and mitigate operational risks by anticipating challenges, fostering cross-functional collaboration, and implementing preventative solutions that support business continuity Develop and analyze operational reports to inform decision-making, drive continuous improvement, and help to simplify existing complexities Create and maintain clear, user-friendly documentation to educate all stakeholders on compliance requirements, operational workflows, and legal technology tools Support onboarding and mentorship of new L&C team members; Share knowledge and best practices to strengthen team capability and foster a culture of continuous learning Exhibit an innovative and growth mindset when executing responsibilities; Bring new ideas to Operations leadership on a consistent basis Requirements: 3-5 years of experience in legal operations, compliance, or related roles Proficiency with legal billing systems, eDiscovery tools, and spend management platforms strongly preferred Strong communicator with the ability to present complex information clearly in written and verbal form Proven ability to identify, implement, and clearly document processes and related improvements Education: Completed BA strongly desired for consideration but not required.

Are you proactive, driven to be accurate, and an amiable communicator? Once you have identified your area(s) of expertise, do you excel in the knowledge of those subjects? Would those who know you well say that you tend to be more book smart than street smart, and that you can become relentless in the pursuit of factual information? Is your communication style reasonably social and full of data? Do you hate being wrong and tend to err on the side of caution to avoid failure? If you are interested in this position, start by copying this link into your browser and completing the required survey: ******************************************** Job Overview: Support the Interior Designer by assisting with administrative and coordination tasks related to client design selections, meetings, and documentation. This position is ideal for someone passionate about residential design who wants to learn the full custom home interior design process from the ground up. Under the guidance of an experienced Interior Designer, this role will help ensure client meetings, selection sheets, and design center operations run smoothly and efficiently. Primary Responsibilities: Work with Interior Designer and learn how to guide a buyer throughout the selection process. Assist with any reselections needed for discontinued products. Maintain a welcoming, organized design center environment - ensure samples, options, and displays are clean, labeled, and up to date. Support the design team in preparing for homeowner meetings, including printing selection sheets, gathering samples, and setting up meeting spaces. Assist with updating and organizing selection sheets, color photos, and redline drawings. Input and track design selections and pricing requests (PRs) in the system. Help organize and file final homeowner documents, cabinet layouts, and countertop recommendations. Prepare and maintain “audit-ready” design files. Support change order updates as directed by the Interior Designer. Update design center displays, samples, and option-level materials. Communicate with vendors and internal departments (Purchasing, Sales, Construction) to assist in tracking or updating design-related information. Attend occasional client meetings to observe and learn the design selection process. Any other Interior Design Assistant duties and responsibilities as assigned. Required Skills & Knowledge: Organization: Strong attention to detail and ability to manage multiple administrative tasks accurately and efficiently. Communication: Excellent written and verbal communication skills; able to relay information clearly to clients and team members. Technology: Proficient in Microsoft Office Suite (Word, Excel, PowerPoint, Outlook); familiarity with design software (AutoCAD, Revit, Chief Architect, or similar) a plus. Teamwork: Willingness to learn and support other team members; takes direction well and works collaboratively. Time Management: Ability to prioritize and complete tasks within deadlines in a fast-paced, client-facing environment. Professionalism: Reliable, punctual, and represents Design Tech Homes' values and customer experience standards. Position Goals: This role is designed to provide hands-on exposure to the custom home design process. Over time, and with training, the Interior Designer Assistant will advance toward leading client color selection meetings and managing design projects independently. Job Type: Full-time Benefits: 401(k) Dental insurance Health insurance Health savings account Life insurance Paid time off Vision insurance Education: Associate (Required) Experience: Interior Design: 2 Years (Required) Ability to Commute: The Woodlands, TX 77380 (Required) Work Location: In person

General Information: Hitachi Energy is seeking a Generation Management System (GMS) Software Application Engineer for its Houston, Texas location. This role is responsible for identifying and implementing optimal technical engineering solutions for our global customers. As part of our expanding Network Control team, you will help meet the growing global demand for innovative technology. We foster a culture of cooperation and collaboration, and we invite you to join our diverse team. As a Software Application Engineer Engineer at Hitachi Energy, you will play a pivotal role in optimizing the operation of power generation, transmission, and distribution for our customers. Your expertise will contribute to ensuring safe, secure, environmentally friendly, and cost-effective operations of power grids. Are you prepared for an exciting new challenge? If the description below resonates with your skills and aspirations, we encourage you to apply early. Join us in shaping a greener and more sustainable future! Your Responsibilities: Software development: Act as a GMS (Generation Management System) software developer to design and develop software solutions for GMS applications, contributing to the enhancement of system functionality, performance, and integration capabilities. Project Delivery and Implementation: Implement Hitachi Energy Network Manager GMS and actively participate in project delivery. Application Configuration and Deployment: Configure and deploy Hitachi Energy GMS applications (e.g., Automatic Generation Control, Economic Dispatch, Reserve Monitor, etc.) to meet the customer requirements. System Integration: Work closely with customers to develop efficient and robust workflow integrations between GMS/SCADA/EMS systems and other IT/OT systems, leveraging state-of-the-art interface and integration technologies. This includes using existing APIs or creating new scripts/software/interfaces. Issue Resolution: Troubleshoot and resolve technical issues related to the Network Manager GMS applications. Customer Collaboration: Work closely with customers on GMS deployments to identify and deliver optimal technical solutions. Technical Support: Provide technical knowledge, experience, and support in GMS to our customers and internal Hitachi Energy teams. Technical Guidance: Provide clear technical responses and guidance for customer inquiries related to Hitachi Energy GMS. Software Testing: Create and execute test plans and procedures with customers to ensure the system meets contractual requirements. Customer Training: Deliver training to customers on GMS system operations, configuration and administration. Sales Support: Provide technical support to the proposals and tendering team, enabling Hitachi Energy to submit high quality bids. Core Values: Living Hitachi Energy's core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business. Qualifications: Strong analytical and communication skills, with an eagerness to thrive in a dynamic and multicultural environment. Proficiency in software programming languages such as C, C++, and FORTRAN. Bachelor's degree in Electrical Engineering, Computer Science, or a related engineering field. Willingness to travel and work at our customers' locations. Fluent in English, both written and spoken, to effectively engage with a diverse range of stakeholders. Foundational knowledge of Power Generation and Power Systems is preferred. Experience with GMS/EMS/SCADA systems is preferred. A proactive “can do” attribute and willingness to learn and figure out an engineering solution for every challenge.

About Us Eric'sons Inc. is a leader in innovative trench drain solutions, dedicated to advancing automation technologies in our manufacturing processes. We are seeking a skilled Mechatronics Technician to join our Automation Team to support the development, maintenance, and improvement of our automated production line. Position Summary The Mechatronics Technician will be responsible for assembling, maintaining, troubleshooting, and improving automated systems that integrate mechanical, electrical, and control components. This is a hands-on role that combines practical shop-floor work with technical problem-solving. The ideal candidate will have strong mechanical aptitude, basic to intermediate electrical skills, and the ability to work collaboratively to keep equipment running at peak performance. Required Skills and Qualifications Strong mechanical aptitude with basic to intermediate electrical skills. Ability to read mechanical drawings and electrical schematics. Hands-on skills in assembly, basic fabrication, and mechanical repairs. Understanding of pneumatic systems and basic control systems. Proficient in the use of common hand tools, power tools, and measuring instruments. Good problem-solving skills and ability to work independently or as part of a team. Strong communication and organizational skills. Preferred Qualifications Experience in a manufacturing or industrial environment. Familiarity with PLCs and automation control systems (basic programming knowledge is a plus). Experience with preventive maintenance programs. Associate degree or technical certification in Mechatronics, Industrial Maintenance, or a related field.

INTREN, Inc. Job Description Job Title: Billing Coordinator Reports To: Project Manager FLSA Status: Non-Exempt The primary responsibility for this position is to support billing functions and ensure billing is submitted in a timely fashion. ESSENTIAL FUNCTIONS: Familiar with all aspects of client billing, including client specific billing requirements and guidelines; communicates changes to department/billing coordinators. Provides feedback on improving Billing process internally via internal protocols and maintain current written procedures manual. Collaborates with other administrative departments, as necessary, to discuss billing guidelines and processes. Prepares bills as assigned; maintains paper and electronic organized records. Prepares all bills in accordance with established policies, procedures and timelines. Provides complete administrative support in the production and delivery of bills, including transmittal documents, PDF assembly. Communicates and follows instructions effectively from a diverse group of clients, attorneys and staff. Provides information in person, via email or by phone with courtesy and professionalism. Follows up with appropriate parties to communicate billing status. Troubleshoots and communicates issues with billing; coordinates with the Data Processing and Accounting departments. Periodically handle tasks from the Controller and Director of Support Services. Keeps Supervisor informed of the status of billing work; maintains a calendar of billing deadlines; prepares bills in advance of due dates. Performs other duties as needed. DESIRED MINIMUM QUALIFICATIONS: Requires effective oral and written communication skills, excellent interpersonal skills and strong computer literacy. Good problem-solving skills and the ability to multi-task are essential. Must be a self-starter and have the ability to organize and prioritize work. Minimum of two years billing experience in a self-starter environment required. Proficient in Microsoft Office applications, specifically Excel and Word. Excellent interpersonal skills. Self-motivated, pro-active and responsible individual able to work under minimal supervision. Good written and oral communication skills and ability to self-edit documents. Highly organized with strong attention to detail. Teamwork oriented individual. Ability to complete projects within required time frame. Ability to organize and prioritize numerous tasks and complete them under time constraints. Intren is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

SunSource and its family of companies represent 200+ locations and 3,000+ employees making up one of North America's leading value-add industrial distribution companies. We provide customers with products and solutions within Fluid Power, Fluid Process, Fluid Conveyance, General Industrial Components, and Industrial Service & Repair. ****************** We currently have a fantastic Fluid Power Outside Sales Account Manager opportunity available that will manage a territory in Cincinnati, OH and surrounding areas. In this position you will develop new business while being supported by our highly knowledgeable customer service team and supportive managers who will assist you in meeting and exceeding your sales goals. We seek an individual with a competitive mindset and entrepreneurial spirit.Experience, Skills, and Education Bachelors degree or a 2 year technical degree, preferably in Fluid Power; or any suitable combination of education, training and work experience Fluid Power certification is preferred 2+ years industrial or technical sales experience with at least 1 years in fluid power sales preferred Application and troubleshooting experience with fluid power products and systems; Ability to establish, build, and maintain business relationships. Ability to grow revenue and increase margins. Must have clear and concise verbal and written communication skills Computer proficiency is required Must have a valid driver's license Overnight travel may be required We Offer Industry competitive compensation plan Medical / Dental / Vision / 401K Paid vacation and Holidays Tuition reimbursement and ongoing training opportunities Mileage Reimbursement As a national distributor with local presence, SunSource is a well-known full-service value-add distributer representing quality manufacturers. Essential Functions Work with your Manager to create a sales plan to develop new customers and maintain existing accounts Full cycle prospecting activities including qualification of leads, cold calls, and sales presentations Collaborate with knowledgeable customer service and technical support teams who will assist you in meeting and exceeding your goals Utilization of tools, resources and CRM to plan and manage time and territory We are an Equal Employment Opportunity Employer M/F/V/D. WE PARTICIPATE IN E-Verify. If you are an individual with a disability and require an accommodation to complete the application process, please contact ********************** to request reasonable accommodation. Only requests for accommodations in the application process will be returned. Sun-Source | Privacy Policy