Substations electrical engineer jobs near me - 833 jobs

A leading tech platform in San Francisco is looking for Electrical Engineer Professionals for a remote AI research project. The position offers flexible hours, allowing you to work independently. Candidates should have at least 4 years of professional electrical engineering experience. Key responsibilities include evaluating AI model responses in your field and providing structured feedback. This is an opportunity to leverage your expertise in a significant way while contributing to AI advancements. #J-18808-Ljbffr

Company: Qualcomm Technologies, Inc. Job Area: Engineering Group, Engineering Group > ASICS Engineering The DTECH team is part of the Global SOC organization and is responsible for STA methodology and signoff, foundry technology enablement and analysis, design automation and internal and external EDA tools, design analysis and optimization tools and platforms, low power architecture, methodology, and IP, and foundation IP development. About the Role As a member of the DTECH Methodology team, you will work closely with core and SOC teams to enable a state-of-the-art design analytics platform. Your work will have a consequential impact on the power, performance, area, and quality of Qualcomm's products. Required for this Role M.S/Ph.D. degree in Electrical Engineering or Computer Science with 1-2 years of relevant experience with ASIC/VLSI design tools and flows Strong programming skills in Python Hands‑on experience with static timing analysis (STA) tools, e.g., PrimeTime and Tempus Problem‑solving and analytical mindset Preferred Qualifications Critical thinking with good software architecture understanding to develop platforms at scale Familiarity with GenAI models (e.g., LLMs such as GPT, Llama, etc.) and their application in real‑world solutions, such as chatbots, etc. Experience designing and developing agentic AI systems Experience with version control tools like Perforce or Git Experience with place & route tools and a good understanding of the ASIC RTL‑GDSII design flow Where you will be working - this role requires the candidate to be onsite in San Diego or Santa Clara, CA. Minimum Qualifications Bachelor's degree in Science, Engineering, or related field and 2+ years of ASIC design, verification, validation, integration, or related work experience. Master's degree in Science, Engineering, or related field and 1+ year of ASIC design, verification, validation, integration, or related work experience. PhD in Science, Engineering, or related field. Qualcomm is an equal opportunity employer. If you are an individual with a disability and need an accommodation during the application/hiring process, rest assured that Qualcomm is committed to providing an accessible process. Please e‑mail disability‑accommodations@qualcomm.com or call Qualcomm's toll‑free number found here. Upon request, Qualcomm will provide reasonable accommodations to support individuals with disabilities to be able participate in the hiring process. Qualcomm is also committed to making our workplace accessible for individuals with disabilities. (Keep in mind that this email address is used to provide reasonable accommodations for individuals with disabilities. We will not respond here to requests for updates on applications or resume inquiries). EEO Employer: Qualcomm is an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, Veteran status, or any other protected classification. Pay range and Other Compensation & Benefits: $115,600.00 - $173,400.00 The above pay scale reflects the broad, minimum to maximum, pay scale for this job code for the location for which it has been posted. Even more importantly, please note that salary is only one component of total compensation at Qualcomm. We also offer a competitive annual discretionary bonus program and opportunity for annual RSU grants (employees on sales‑incentive plans are not eligible for our annual bonus). In addition, our highly competitive benefits package is designed to support your success at work, at home, and at play. Your recruiter will be happy to discuss all that Qualcomm has to offer - and you can review more details about our US benefits at this link. If you would like more information about this role, please contact Qualcomm Careers. #J-18808-Ljbffr

A leading tech company is seeking an experienced engineer for their KV Stores & Caching team. The role involves contributing to critical infrastructure, solving challenges in distributed systems, and improving caching solutions. Ideal applicants should have 3+ years in relevant fields and a solid understanding of distributed systems. This position is remote eligible in certain states, promoting a diverse and inclusive environment. #J-18808-Ljbffr

Electrical Design Engineer (MEP) Houston, Texas $90,000 - $110,000 + Training + Career Progression + Support to Gain PE License + Bonus + Fantastic Benefits + Tuition Reimbursement + Work-From-Home Fridays! Are you an electrical engineer looking to work on exciting commercial MEP projects, with excellent training and a clear progression pathway to becoming a PE? This is an excellent opportunity to be the go-to electrical engineer on various technical construction projects, with the chance to progress into a Project Management position and gain your PE license. This growing company specializes in designing MEP systems for commercial projects. Due to their long-term expansion plans, they are looking for an Electrical Engineer to serve as a technical expert on diverse projects. They will also fund your PE license, granting you the opportunity to further advance your career. In this role, you will be based in the office, where you will be responsible for designing construction documents, producing electrical schematics and drawings, handling RFI documents, and liaising with clients and architects to meet project requirements. This is a great opportunity for an electrical engineer who wants to obtain their PE license and advance within a company that actively invests in its employees while working on technically challenging commercial projects. The Role: Serve as the technical expert for MEP systems in commercial projects Design electrical systems, liaise with site staff, and conduct site visits Office-based The Person: Electrical Engineer Degree in a relevant field Aspires to become a Professional Engineer

Staff Electrical Engineer Salary Up to $170,000 + Bonuses + Stellar Benefits and REMOTE with 50% Travel Live anywhere in the USA near a major Airport! Join a top-tier wood products leading company as a Staff Electrical Engineer and shape the future of electrical safety and reliability across their U.S. facilities. This is a high-impact, high-visibility role where you'll work directly with senior leadership and make a real difference. Benefits of working for this awesome company: · Work remotely from anywhere in the U.S. · Travel 50% to manufacturing sites · Be the go-to electrical expert for a major division · Fantastic top tier benefits · Enjoy strong compensation, bonuses, and career growth · This is your chance to lead, innovate, and grow with a company that values expertise and impact. As the Staff Electrical Engineer, your responsibilities will be: · Lead electrical system design, upgrades, and commissioning · Drive safety and reliability across all facilities (NFPA 70/70E) · Conduct audits, model arc flash energy, and coordinate breakers · Manage capital projects from concept to commissioning · Collaborate with cross-functional teams and top-tier leadership. Minimum Required for this Staff Electrical Engineer position: · BS in Electrical Engineering · At least 5 years in power distribution systems for wood products or similar heavy industries · Deep knowledge of NFPA 70/70E, arc flash modeling, and system coordination · Strong project management and communication skills · Proficiency in EasyPower, ETAP, AutoCAD, MS Project, and MS Office.

Company: Qualcomm Technologies, Inc.Job Area: Engineering Group, Engineering Group > ASICS Engineering As a leading technology innovator, Qualcomm pushes the boundaries to enable next generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Design Verification Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, validate digital/analog designs and develop a comprehensive validation/verification testbench environment for projects that launch cutting-edge, world class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions that meet performance, security, technology, and feature requirements. As a Design Verification Engineer, you will work with Chip Architects to validate the concepts of core and sub-system level micro-architectures. You will work on a selected part of the subsystem Design Verification to ensure that it functions to the standards of being launch ready for the end Product. Role and Responsibilities Work with subsystem and SOC Architects to understand the concepts and high-level system requirements. Develop detailed Test and Coverage plans based on the Architecture and Micro-architecture. Develop Verification Methodology, ensuring scalability and portability across environments. Develop Verification environment, including all the respective components such as Stimulus, Checkers, Monitors Assertions, and Coverpoints. Develop Verification Plans and Testbenches for your functional domain. Execute Verification Plans, including Design Bring-up, DV environment Bring-up, Regressions enabling all features under your care, and Debug of the test failures. Track and report DV progress using a variety of metrics, including Bugs and Coverage. Preferred Qualifications Deep knowledge of APB/AXI/SPI protocols, handshake mechanisms, cross-clock domains and clock gating. Solid understanding of memory organization, fault-tolerant design, parity schemes, error detection and error correction schemes. Advanced techniques such as: Formal, Assertions, and Silicon bring-up, is helpful. In-depth knowledge of Micro-processor functions, Network-on-Chip Architectures, and Micro-architectures. Experience in writing Testplans, portable Testbenches, Transactors, and Assembly code. Experience with different Verification Methodologies and Tools such as Simulators, Coverage collection, Gate-level Simulation, Waveform viewers, and Mixed signal Verification. Ability to develop and work independently on a Block/Unit of the design. Qualifications Minimum Experience Level should be 2+ years in SOC-level or core-level verification with good understanding of debugging either ARM-based or RISC-V based processors, good understanding of APB/AHB/AXI protocols. Must have solid understanding of SV/UVM concepts. Prior experience in any cryptographic algorithm is preferred. Must have basic understanding of UNIX commands and Python/Perl scripting Minimum Qualifications • Bachelor\'s degree in Science, Engineering, or related field and 4+ years of ASIC design, verification, validation, integration, or related work experience. OR Master\'s degree in Science, Engineering, or related field and 3+ years of ASIC design, verification, validation, integration, or related work experience. OR PhD in Science, Engineering, or related field and 2+ years of ASIC design, verification, validation, integration, or related work experience. Qualcomm is an equal opportunity employer. If you are an individual with a disability and need an accommodation during the application/hiring process, rest assured that Qualcomm is committed to providing an accessible process. You may e-mail disability-accomodations@qualcomm.com or call Qualcomm\'s toll-free number found here. Upon request, Qualcomm will provide reasonable accommodations to support individuals with disabilities to be able participate in the hiring process. Qualcomm is also committed to making our workplace accessible for individuals with disabilities. (Keep in mind that this email address is used to provide reasonable accommodations for individuals with disabilities. We will not respond here to requests for updates on applications or resume inquiries). To all Staffing and Recruiting Agencies: Our Careers Site is only for individuals seeking a job at Qualcomm. Staffing and recruiting agencies and individuals being represented by an agency are not authorized to use this site or to submit profiles, applications or resumes, and any such submissions will be considered unsolicited. Qualcomm does not accept unsolicited resumes or applications from agencies. Please do not forward resumes to our jobs alias, Qualcomm employees or any other company location. Qualcomm is not responsible for any fees related to unsolicited resumes/applications. EEO Employer: Qualcomm is an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, Veteran status, or any other protected classification. Qualcomm expects its employees to abide by all applicable policies and procedures, including but not limited to security and other requirements regarding protection of Company confidential information and other confidential and/or proprietary information, to the extent those requirements are permissible under applicable law. Pay range and Other Compensation & Benefits: $140,000.00 - $210,000.00 The above pay scale reflects the broad, minimum to maximum, pay scale for this job code for the location for which it has been posted. Salary is only one component of total compensation at Qualcomm, which also includes a discretionary bonus program and potential RSU grants. Our benefits package supports success at work, at home, and at play. Your recruiter can discuss details, and you can review more about US benefits at this link. If you would like more information about this role, please contact Qualcomm Careers. #J-18808-Ljbffr

Our Mission is to Identify, Hire, Train and Retain the very best people! Could that be you? Join the Ace Electric team for opportunities to work with the best team and build your career with Ace University! Since our inception in Valdosta, GA in 1975, Ace has been performing quality electrical installations in a full range of markets including: commercial, mission critical, education, healthcare, institutional, industrial, correctional facilities, hospitality, military bases, retail and others. In the past 15 years, locations have been added in Macon, GA, Atlanta, GA, Jackson, TN, Statesboro, GA, Sanford, NC and Plain City, OH. Ace offers fabrication services, hard bid, design-build, negotiated contracts and fee-based work. We have the resources, professional staff and project management team to handle almost any type of electrical project. Our history of safety and quality has been established through years of successful projects and satisfied customers. Ace Electric is growing bigger in business each year and has no signs of slowing down! Benefits: Health, Dental, Vision, Life, Disability, Accident and Critical Illness Insurances 401k with Match Access to Ace University: Apprenticeship Program, Leadership Training, Skill Building Classes and much more! General Summary: The Preconstruction Manager will be responsible for leading the preconstruction phases of project for their assigned division that includes sales, project design, budget and managing the bidding process. The Preconstruction Manager will report to the Division Manager. Preferred Job Skills: Proven ability to work in a fast paced and ever-changing environment. Good verbal and written communication skills. Desire to learn and willingness to try new techniques. Proficient computer skills (Microsoft Word, Excel, Spectrum, Accubid, Accubid Anywhere, Bluebeam etc.). Ability to focus on details while still maintaining a big picture perspective. Proven ability to develop and work as member of a team. Good understanding of the NEC, and Electrical Theory. Ability to read and understand construction specifications and detailed drawings. Proven ability to develop and follow construction schedules. Mandatory Hiring Requirements: References, Background Check, Drug Screen Testing, Valid Driver's License. Responsibilities: Lead all preconstruction services including sales, design, budgeting, and bidding Review the scope of construction work to be completed to determine the type of work, basic materials, project duration and define the responsibility for construction. Contribute in a meaningful way to value engineering and alternatives in proposals Reconcile estimates with consultants and design team members. Prepare and Present Conceptual Estimating Assist in all business development meetings Coordinate and evaluate feedback from departments within the company (Operations, Accounting etc.), the project Owner and the project Architect during the estimating and construction process. Review all estimates and scope of work/proposal submissions. Provide superior customer service. Understand and be able to communicate scope of contract to your supervisors, clients, and subcontractors. Position Requirements: License: Valid state driver's license as required by job conditions or by the company. Certification: None required. Education: High School Graduate or GED. Bachelor's degree preferred. Experience: Minimum of 7 years of experience in construction estimating and preconstruction management required. Working Conditions: Work in a climate-controlled office setting with varying degrees of stress and time pressure. Considerable amount of time making repetitive motions. Considerable amount of time sitting. Considerable amount of time using telephone and computer. Sounds and noise levels may be distracting or uncomfortable. Required Physical/Mental Functions: Comprehend and practice safe work procedures as outlined in Company Safety Handbook. Operate company vehicle. Read and interpret instructional manuals and written instructions. Must hear and see well (either natural or with correction). Must be able to bend, stoop, squat, kneel, push, pull and reach overhead. Able to lift objects weighing up to 30 pounds, with frequent lifting and carrying of objects weighing up to 20 pounds. Tolerant to prolonged sitting. Repetitive use of arms, hands, and fingers AAP/EEO Statement: Ace Electric, Inc. is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identification, national origin, disability status, protected veteran status, or any other category protected by federal, state, or local law.

What Makes a Honda, is Who makes a Honda Honda has a clear vision for the future, and it's a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.” We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team. If your goals and values align with Honda's, we want you to join our team to Bring the Future! Job Purpose To contribute to the development of functioning prototypes that will eventually become production ATV/SxS vehicles, researching and applying new technologies to support business targets and maintaining global vehicle product quality. Key Accountabilities Develop basic component and system layouts for ATV/SxS prototype vehicles using computer-aided design software that achieve concept targets, function requirements, and manufacturing requisites with minimal supervision. Communicate specification requirements and manufacturing control points via prototype and production drawings that result in setting the final specifications of global ATV & SxS new models and mass production vehicles. Maintain accurate technical, development, and administrative documentation as required. Adhere to given cost targets for responsible parts that contribute to achievement of the vehicle development targets and achieve the cost targets through optimizing basic part/system designs and offsetting any spec changes after target fix through implementation of additional cost reduction ideas. Create and manage schedule of individual work to ensure deadlines are met, coordinate resource needs with supervisor, and effectively utilize contractor resources with minimal supervision. Consistently communicate project status and participate in project meetings, discussions, and development events. Generate basic ideas that contribute to the evolution of new technologies. Support maturation of ideas to prepare for development applications with minimal supervision. Support market quality themes under the direction of others. Utilize problem-solving methods to analyse root causes. Develop and implement C/M specs as necessary with minimal supervision. Qualifications, Experience, and Skills Minimum Educational Qualifications Bachelors Degree or equivalent in a related engineering discipline Minimum Experience : Engineering experience desired, preferably in the Powersports or Automotive field Other Job-Specific Skills Strong leadership, coaching and mentoring skills Ability to interact/communicate effectively with staff/management Must be able to operate with high level of confidentiality Competent in FTA, FMEA, dimensional tolerance stack-ups and application Competent analytical, problem solving, judgement, decision-making and prioritization Competent drawing and layout skills/techniques, include understanding of CAE principles Competent in creating a plan and schedule Competent in understand product development schedules Working Conditions Travel: Average of 1-3 times monthly. Amount varies based on project demands/responsibilities, conferences, etc.; includes possible overseas travel. Physical: Primarily works at a desk or scope; frequent keyboarding. Limited kneeling, standing, squatting, reaching or bending. Hazards: Risks found in a typical office & shop setting. May be exposed to explosives/flammables, pressurized equipment, toxic chemicals and moving parts. Overtime: Overtime expected based on project demands/responsibilities. Maintains professional conduct and follows all departmental, safety Department, and Company policies, Procedures, and rules. What differentiates Honda and make us an employer of choice? Total Rewards: Competitive Base Wages (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.) Paid Overtime Regional Bonus (when applicable) Industry-leading Benefit Plans (Medical, Dental, Vision, Rx) Paid time off, including vacation, holidays, shutdown Company Paid Short-Term and Long-Term Disability 401K Plan with company match + additional contribution Career Growth: Advancement Opportunities Career Mobility Education Reimbursement for Continued Learning Training and Development Programs Additional Offerings: Lifestyle Account Childcare Reimbursement Account Tuition Assistance & Student Loan Repayment Elder Care Support Wellbeing Program Community Service and Engagement Programs Product Programs Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

This is a full-time consultant position within the substation department, aimed at supporting our utility customer through critical engineering projects. The engineer will collaborate with both in-house and client engineers and designers, providing coordination and training to junior engineers. Responsibilities + Develop project scopes, one line diagrams, and estimates for substation projects. + Review substation construction drawings and verify compliance with codes and standards. + Engineer and design lightning protection, grounding, and equipment replacement and repair. + Make necessary changes and corrections to drawings and documentation. + Ensure proper use of equipment and materials according to project standards and codes. + Verify timely ordering and delivery of materials and equipment for substation construction. + Travel to project sites for walk downs and information gathering. + Function as a project lead for substation projects. + Perform engineering and design activities with minimal direction. + Lead and coordinate work activities within the team and with external groups. + Provide training and guidance to lower level employees. + Identify and initiate corrective action when project objectives are not met. + Interpret codes and regulations and develop construction project standards. + Promote engineering professionalism and standards. + Participate in plan development by establishing goals, objectives, and requirements. + Work under the supervision of higher level engineers. Essential Skills + Experience in utilities working with substations (2-8 years). + Experience in completing engineering projects from start to finish (2-8 years). + Experience in scoping, estimating, and ordering materials for substations (2-8 years). + Bachelor's Degree in Electrical Engineering or Civil Engineering from an accredited institution. Additional Skills & Qualifications + Master's Degree in Electrical Engineering or Civil Engineering can count toward years of experience. + A PE License is desirable but not required. + Skills in substation design, project engineering, and understanding of physical utility engineering. Job Type & Location This is a Contract position based out of Phoenix, AZ. Pay and Benefits The pay range for this position is $45.00 - $60.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully remote position. Application Deadline This position is anticipated to close on Jan 20, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

SOLV Energy is an engineering, procurement, construction (EPC) and solar services provider for utility solar, high voltage substation and energy storage markets across North America. The Substation Engineer is responsible for the design, implementation, and testing of electrical substation, ensuring they meet safety standards, operational requirements, and project specifications. The Substation Engineer should have a solid understanding of power systems, substation equipment, and relevant industry standards. This role is fully remote. Specific location details and expectations will be discussed during the interview process. : *This job description reflects management's assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned Position Responsibilities and Duties: Review electrical substations, including layout, equipment selection, and equipment specifications in accordance with project requirements and industry standards. Review load flow, short circuit, and relay coordination studies to ensure the reliability and efficiency of substation designs. Prepare/Review detailed engineering drawings, schematics, and technical specifications using AutoCAD electrical or Bluebeam. Coordinate with internal and external stakeholders, including utility companies, contractors, and regulatory agencies to obtain approvals and permits for substation projects. Review and evaluate vendor proposals for technical accuracy to specifications for substation components. Identify opportunities for design upgrades, improvements, or provide value engineering solutions. Provide technical support during the construction, testing, and commissioning of new substations, ensuring compliance with project schedules and quality standards. Troubleshoot and resolve technical issues related to substation equipment and systems, both remotely and on-site. Perform root cause analysis and recommend corrective actions for substation failures. Stay informed about emerging technologies and best practices in substation design, automation, and protection systems. Assist in the development of standards, procedures, and guidelines for substation engineering activities. Collaborate with cross-functional teams, including transmission planners, protection engineering, control systems specialists, PV engineering, and BESS engineering to ensure the seamless integration of substations into the overall power grid. Participate in safety audits and inspections to identify and mitigate potential hazards in substation facilities. Assist with mentoring junior engineers, technicians, and peers providing guideance, training, and lessons learned on substation design principles and practices. Maintain accurate documentation and records of substation designs and modifications. Participate in team meetings/calls regularly Demonstrate and maintain a safe work environment and direct safe work practices in energized substations. Complete other responsibilities as assigned. Ability to travel as needed (~%10) Minimum Skills or Experience Requirements Bachelor's degree in electrical engineering or related field; master's degree preferred. 3-4+ years in substation design, construction, or maintenance. Solid understanding of power systems, including transmission, distribution, and generation. Proficiency in engineering software tools such as ETAP, SKM, or PSS/E for power system analysis. Familiarity with protection relay programming, coordination studies, and simulation software (e.g., SEL, GE Enervista). Familiarity with relevant indstry standards and codes, such as IEEE, ANSI, and NESC. Proficient technical skills in substation layout, equipment sizing, and protection coordination. Excellent communication and interpersonal skills with the ability to work effectively in a team environment (local and remote). Detail-oriented with strong problem-solving abilities and a commitment to quality. Ability to manage multiple projects simultaneously and prioritize tasks to meet deadlines. Willingness to pursue licensure is a plus. SOLV Energy Is an Equal Opportunity Employer At SOLV Energy we celebrate the power of our differences. We are committed to building diverse, equitable, and inclusive workplaces that improve our communities. SOLV Energy prohibits discrimination and harassment of any kind against an employee or applicant based on race, color, age, religion, sex, sexual orientation, gender identity or expression, marital status, national origin, or ethnicity, mental or physical disability, veteran status, parental status, or any other characteristic protected by law. Benefits: Employees (and their families) are eligible for medical, dental, vision, basic life and disability insurance. Employees can enroll in our company's 401(k) plan and are provided vacation, sick and holiday pay. Compensation Range: $98,400.00 - $123,000.00 Pay Rate Type: Salary SOLV Energy does not accept unsolicited candidate introductions, referrals or resumes from third-party recruiters or staffing agencies. We require all third-party recruiters to communicate exclusively with our internal talent acquisition team. SOLV Energy will not pay a placement fee to any third-party recruiter or agency that has not coordinated their recruiting activity with the appropriate member of our internal talent acquisition team. In addition, candidate introductions or resumes can only be submitted to our internal talent acquisition recruiting team if a signed vendor agreement is already on file and the third-party recruiter or agency has received formal instructions from our internal talent acquisition team to submit candidates for a particular job posting. Any unsolicited candidate introductions, referrals or resumes sent by third-party recruiters to SOLV Energy or directly to any of our employees, or received through our website or career portal, will be considered property of SOLV Energy and will not be eligible for a placement fee. In the event a third-party recruiter submits a resume or refers a candidate without a previously signed vendor agreement, SOLV Energy explicitly reserves the right to pursue and hire the candidate(s) without financial liability to such third-party recruiter. #LI-Remote Job Number: J12244 If you're interested in a meaningful career with a brighter future, join the SOLV Energy Team.

We are seeking a skilled Substation Engineer to join our power delivery engineering team. The Substation Engineer will be responsible for the design, analysis, and implementation of high-voltage substation projects ranging from 69kV to 500kV. The ideal candidate will have hands-on experience with substation layout, equipment selection, protection and control systems, and integration with transmission and distribution systems.This role involves collaboration across multiple disciplines-including civil, structural, and protection engineering-to ensure high-quality, cost-effective, and reliable designs that meet client and industry standards. Locations Available (Mostly Onsite):- Raleigh, NC- Charlotte, NC- Owings Mills, MD- Summerville, SC- Katy, TX- Baton Rouge, LAResponsibilities: Develop substation physical and electrical designs, including one-line diagrams, three-line diagrams, general arrangements, grounding, conduit, and control schematics. Prepare design drawings, technical specifications, and bill of materials for new and retrofit substation projects. Conduct equipment selection and specify transformers, circuit breakers, switches, buswork, relays, and other substation components. Collaborate with Protection & Control Engineers to integrate relaying and communication systems. Perform load flow, short circuit, and grounding studies as needed. Ensure all engineering deliverables meet NESC, IEEE, ANSI, IEC, and utility standards. Coordinate with internal design teams, utilities, and contractors to ensure technical accuracy and constructability. Participate in site visits to support design verification, construction, and commissioning. Provide technical support during procurement, installation, and testing phases. Maintain project schedules, budgets, and documentation per client and company requirements.

Responsible for substation engineering and consulting services for clients across the US and internationally. Main responsibilities include creating electrical protection & control and/or physical layout design deliverables. Projects range in size, complexity, and voltage class from small distribution facility upgrades to large transmission projects. This position can influence the future of the resiliency, reliability, and economic operation of the electric grid. Principal responsibilities include the design of high voltage (13kV-500kV) electrical substations. Areas of design and responsibilities include leading and executing the following: Preparation of proposals and scope development, including conceptual designs and execution plans. Prepare engineering cost and labor estimates and schedules. Physical substation design including yard layouts, plans, sections and details, grounding, lightning protection, control building arrangements, interior and exterior raceways, auxiliary AC/DC power systems, and associated bills of material. Protection and control design including panel arrangements, one lines/single lines, three lines, AC schematics, DC elementaries, equipment wiring and relay panel wiring. Preparing calculations and reports for engineering studies (grounding, lightning protection, AC/DC load studies, etc.) Preparing equipment specifications for procurement and/or factory acceptance testing. Coordinating design activities with other departments (Civil/Structural, Networks, Transmission Line, others.) Providing guidance and mentoring to less experienced team members. Regularly meeting with and corresponding with clients or outside personnel. Performing quality reviews for other engineers and designers. Providing short term field support during construction. Supporting business development and marketing initiatives. Other areas of involvement may include relay settings, 3D/intelligent design, or industry/professional technical committee involvement. Performing other duties as assigned. Qualifications Bachelor's Degree in Electrical or related Engineering Technology from an ABET accredited program and successful completion of Fundamentals of Engineering (FE) exam and 3 years of electrical engineering experience, consulting preferred required or Master's Degree in Electrical Engineering and 2 years of electrical engineering experience, consulting preferred required Strong knowledge in standard engineering techniques and procedures. Excellent written and verbal communication skills. Ability to work methodically and analytically in a quantitative problem-solving environment and demonstrated critical thinking skills. Proficient in standard engineering techniques and procedures. Strong computer skills (e.g. Microsoft Office Suite) Strong computer skills include AutoCAD, MicroStation, 2D and 3D rendering programs and other analysis programs. Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills. Engineers in Training-EIT Certification Preferred

Knauf Insulation North America is the world's fastest-growing insulation manufacturer. We are wholly committed to the conservation of the environment while also sustainably developing and manufacturing a comprehensive line of acoustical fiberglass insulation for residential, commercial, industrial, marine, OEM and metal building applications, using post-consumer recycled materials. We welcome passionate and creative individuals who thrive in an entrepreneurial, collaborative and ever-changing environment. We know how important your health, wellbeing, and financial strength is to you. To support you, we provide affordable benefits for you and your family members. "Supporting all aspects of the individual - self, health, wealth and community” Our benefits include: Medical, Dental, Vision - starting on day one! Virtual Medical Services 401(k) Retirement Plan (earn 100% matching on your first 6% and fully vested day one) Paid parental leave Company paid life insurance Vacation time to enjoy getting away Tuition Reimbursement Employee Assistance Program (EAP) Plus, more! Growth opportunities available! Apply online or contact us to hear why our employees appreciate being part of the Knauf family! Summary of Position: Join our team as an Electrical Project Engineer and play a pivotal role in driving innovation and excellence across our North American plants! In this dynamic position, you'll lead the design and project management of cutting-edge electrical and control systems, focusing on process improvements and optimizing machine performance. You'll have the opportunity to explore and implement advanced technologies that enhance safety, quality, and profitability. Your expertise will shine as you design and program PLCs, HMIs, Drives, and Servo systems, while managing contractor relationships and overseeing large-scale capital projects. Collaboration is key, as you'll work closely with teams across the company, contributing to the standardization of controls, networks, and power equipment. With approximately 30% travel (and more during exciting plant rebuilds), you'll experience hands-on involvement in transformative projects that make a real impact. If you're passionate about innovation, problem-solving, and making a difference, this role offers the perfect blend of technical challenges and rewarding opportunities. Join us and help shape the future of our facilities! Must be willing to relocate to one of our U.S. locations to be considered for the role (Relocation is provided): - Albion, MI - Lanett, AL - Inwood, WV - McGregor, TX - Shasta Lake, CA - Shelbyville, IN Responsibilities Lead and Oversee Large-Scale Capital Projects: Take ownership of major capital initiatives, ensuring successful execution from concept to completion. Design and Program Advanced Systems: Perform programming for Programmable Logic Controllers (PLC), Human-Machine Interfaces (HMI), Drives, and Servo systems to optimize performance and efficiency. Drive New Plant Projects and Equipment Upgrades: Manage the design, specification, and execution of new plant projects, as well as the upgrade and redesign of existing equipment, ensuring seamless integration and improved functionality. Develop and Execute Comprehensive Project Plans: Create detailed scopes of work, request and evaluate quotes, issue purchase orders, and coordinate internal and external project teams while maintaining strict adherence to budgets and timelines. Manage Contractor Relationships: Oversee external contractors performing new installations and electrical upgrades, ensuring quality and compliance with project requirements. Pursue Cutting-Edge Technologies: Identify and implement innovative solutions to enhance safety, product quality, plant profitability, and operational efficiency by reducing scrap, lowering maintenance costs, and more. Coordinate and Implement OEM Equipment: Collaborate with Original Equipment Manufacturers (OEMs) to integrate new equipment into plant operations effectively. Enhance Electrical Safety Practices: Partner with Corporate HSE to develop and implement best-in-class electrical safety practices across all Knauf Insulation North America facilities. Support Plant Rebuilds: Provide critical expertise and leadership during plant rebuilds, ensuring projects are completed efficiently and effectively. Train and Develop Team Members: Offer training and development support to plant Craftsmen, Operators, and Engineers, fostering a culture of continuous improvement and skill enhancement. Drives the highest levels of employee retention and engagement to ensure a sustainable workforce. Fosters a culture of innovation, collaboration, and accountability within the organization. Instill an environment of inclusion, where all employees feel that they can contribute and impact the company in a positive manner. Qualifications Education: Bachelor's Degree in Electrical Engineering or Electrical Engineering Technology Knowledge, Skills and Abilities: Strong leadership skills with a natural ability to take initiative and guide teams toward success. A willingness to learn and grow, with a proactive attitude toward acquiring new skills and knowledge. Highly adaptable and able to thrive in a fast-paced, ever-changing environment. Excellent communication and interpersonal skills, with the ability to persuade and influence others effectively. A collaborative mindset, capable of building strong relationships with team members, contractors, and stakeholders. Problem-solving skills with a creative and innovative approach to overcoming challenges. A passion for technology and a drive to implement solutions that improve safety, quality, and profitability. It is the policy of Knauf Insulation to provide equal employment opportunities to all qualified persons without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status or any other protected characteristic prohibited by applicable law. Not ready to apply? Connect with us for general consideration.

SummaryCome bring your energy to change the world. Grid Solutions, part of the GE Vernova portfolio of energy businesses, serves customers globally with over 12,000 employees. Grid Solutions provides equipment, systems, and services to bring power reliably and efficiently from the point of generation to end power consumers. We electrify the world with advanced grid technologies and accelerate the energy transition. GE Vernova, a dynamic accelerator comprised of our Power, Renewable Energy, Digital and Energy Financial Services businesses, is focused on leading a new era of energy - electrifying the world while simultaneously working to decarbonize it. If you are ready to make a difference and usher in a new era of energy, come join us.Job Description Why we come to work: At GE Grid Solutions, we are always up for the challenge - and we're always driven to find the best solution. Our projects are unique and interesting, and you'll need to bring a solution-focused, positive approach to each one to do your best. Surrounded by committed, loyal colleagues, if you can dare to bring your ingenuity and desire to make an impact, you'll be exposed to game-changing, diverse projects that truly allow you to play your part in the green energy transition. Essential Responsibilities: Independently perform in depth system studies listed below; and/or specify scope, review, comment, and direct/oversee 3rd party provider(s) for the studies below: Load Flow, Reactive Power Capability and Compensation, Power Factor Study Short Circuit Study Combined Short Circuit Ratio (CSCR) Study Transient Switching and Insulation Coordination Study (including Transient Overvoltage and Recovery Voltage Analysis) Main Circuit Parameters Harmonic Performance/Stability Study Transient Ride Through and Dynamic Performance Studies (DPS) and other Design Studies using the Offline Simulation Tools Overall System Performance Assessment Study Integration of dedicated studies for systems utilizing combined AC power sources; AC power sources include conventional generations, AC-BESS, turbines, and renewables. Expertise in frequency and time-domain simulation tools, like PSCAD, PSS/E, ETAP, DigSilent PowerFactory, to perform system studies as detailed above or under desired characteristics section. Produce detail technical specifications and factory acceptance test criteria for major HV equipment, e.g., transformers, GSU, breakers, disconnect switches, etc. Excellent technical communication skills to provide guidance, analysis and reports in clear succinct manner to customers, project team and stakeholders. Provide guidance and coordinate the engineering tasks to meet the project/tender requirement. Technical responsibility in areas of expertise. Be innovative, develop and industrialize solutions tools and processes associated with system studies. Value engineering (process improvement): review and record design processes and develop new or improved processes. Enforce engineering discipline and set processes across all work tasks and adherence to company policies, quality procedures and work instructions (e.g., through trainings, technical reviews). Represent the business in external events by publishing technical papers. Apply yourself towards improving your technical knowledge base and keep abreast of relevant methodologies and technological advancement within the company. Support and mentor other engineers to increase the team's technical knowledge and competence. Report or resolve any non-conformances in a timely manner. Actively participate in defining corrective actions when work is unsafe or when an uncontrolled risk is observed. Required Qualifications: Bachelor's degree in electrical engineering including power systems and power electronics subjects with proven professional experience and technical expertise in the field of power system engineering and preferably in AC substations and power plant System Studies. Minimum 8 years' experience of network or transient studies for conventional electric-energy generation / FACTS / renewable energy / inverter-based power systems in offshore wind, industrial, utility substations and grid interconnects. Able and willing to travel 20% including international and comply with GE travel guidelines. Desired Characteristics: Knowledge of the North American Electric Reliability Corporation (NERC) and Federal Energy Regulatory Commission (FERC) compliance requirements and/or ISOs' interconnection or transmission planning guidelines. Familiarity with NERC standards such as TPL, MOD, and PRC. Familiarity with ISOs such us PJM, ERCOT, MISO, SPP, CAISO, ISO-NE, NYISO. Master's degree in electrical engineering including power systems and power electronics subjects with proven professional experience and technical expertise in the field of power system engineering. Knowledge of RAM (Reliability-Availability-Maintainability) studies. Independently perform in depth system studies listed below and/or specify scope, review, comment, direct/oversee 3rd party provider(s) for the studies below: Grid Compliance, Transmission Network Planning Electromagnetic Compatibility (EMC) Study, Radio Frequency Interference (RFI) Study Low Voltage Ride Through (LVRT) and High Voltage Ride Through (HVRT) Study Arc Flash Study Protection Coordination Study Cable Selection and Sizing Network Study: Confirmation of the Correct Interaction between the Equipment, its Control System, and the rest of the Network Control Parameter Study focused on Dynamics and Transient Performance Grid forming study with an AC/DC power pack Expertise in the use of computer mathematical and simulation tools as applied to the design of the activities. Strong knowledge on medium high voltage substation North American standards & guidelines (IEEE & ANSI standards and codes such as the NEC and the NESC.), local grid codes and related equipment (safety, application, sizing, and integration). Moreover, ability to engineer design packages when no clear customer specification is provided. Knowledge of IEC and CIGRE guidelines is a plus. Professional engineering license and willing to review and seal your work and the work of others under your supervision. Strong knowledge on contract and project management, engineering, procurement and construction (EPC), or engineering equipment package (EEP) project execution. Working knowledge of applicable design calculations for primary & secondary equipment such as battery sizing & DC system component selection, power transformer and circuit breaker selection, circuit protection, control and power cable selection and rating, bus, fittings, insulator, and arrector selection, ground grid design, and lightning protection. Excellent personal computer skills, including programming and design automation. Additional Information GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No #LI-Remote - This is a remote position Application Deadline: January 16, 2026For candidates applying to a U.S. based position, the pay range for this position is between $98,400.00 and $164,000.00. The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set.Bonus eligibility: discretionary annual bonus.This posting is expected to remain open for at least seven days after it was posted on December 09, 2025.Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance, 12 paid holidays, and permissive time off.GE Vernova Inc. or its affiliates (collectively or individually, “GE Vernova”) sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual.

Lumenance is seeking a full\-time engineer to develop (3D + 2D CAD) wire harnesses, junction boxes, and related electrical components and sub\-systems for our client in the commercial vehicle market. This is a contract\-to\-direct position with a growing manufacturer. JOB SUMMARY Designs new, high voltage electrical distribution systems (EDS), low voltage wiring harness products and makes improvements to existing products. Evaluates products and processes for cost efficiency and reliability. Works with other members to ensure that production is completed in a timely manner. Ensures that products, processes, and documentation conform to specifications and customer requirements. RESPONSIBILITIES \•\\tDesigns electrical distribution system (EDS) products to meet all customer requirements and internal design standards, including high voltage wiring and smart junction boxes. \•\\tDesigns high Voltage Cables and Connectors and work directly with their suppliers \•\\tDesigns low voltage wiring harnesses and battery cables \•\\tGenerates a Bill of Material (BOM) and prints for product designs. \•\\tCoordinates with Sales, Purchasing, and Manufacturing to assess product and processing costs and ensure that program cost targets are achieved. \•\\tCoordinates 3D designs to package components and create schematics \- has full design responsibility. \•\\tDefine retention, convolute, tapes. \•\\tProvides proposals on cost/weight reduction to enhance productivity. \•\\tCoordinates all program status review meetings, design review meetings, and harness trial builds with customer, manufacturing, and purchasing. \•\\tAttends customer meetings and build events. \•\\tMaintains a program open issues list to track all issues (i.e., design, system, manufacturing, purchasing, and customer) which are related to the program. \•\\tReviews the open issues list with the customer, manufacturing, and purchasing. \•\\tCoordinates program timing, PPAP, and master sample reviews. \•\\tSupports future business opportunities by working closely with the Sales, Purchasing, and Manufacturing groups. WORKING CONDITIONS \•\\tGeneral Engineering Office Environment, or potential remote work from home (for right experience) \•\\tTravel to customer and occasional travel to plants Requirements\• 5+ years of experience in engineering or a related technical area \• Engineering degree in a relevant discipline \•\\tExperience designing new high voltage wire harness and cable assemblies \•\\tExperience designing smart junction boxes, including routing and wire gauge selection \•\\tDemonstrated knowledge of vehicle electrical systems, understanding of engineering/technical requirements and standards. \•\\tKnowledge of automotive (or similar transportation industry) component development and production processes, wire harness assembly processes, wire harness components \•\\tComputer Aided Design (CAD) systems (CATIA) \- preferably CATIAV6 \•\\tDesign Failure Mode Effects Analysis (DFMEA). \•\\tProficiency in using MS Excel, Outlook, PowerPoint, and Word also recommended

This position is posted by Jobgether on behalf of a partner company. We are currently looking for a Power Systems Electrical Engineer. In this role, you will play a critical part in shaping the electrical engineering landscape for innovative projects within the data center industry. Your expertise will contribute to designing power supply infrastructure, ensuring compliance with industry standards, and optimizing project management processes. You will collaborate with colleagues across various departments and geographical locations, making a significant impact by providing technical support and solutions to complex challenges.Accountabilities Develop detailed Electrical Engineering CAD drawings and specifications related to power supply infrastructure for mining data centers. Assist procurement to specify electrical equipment including transformers, switches, distribution panels, and associated ratings. Provide electrical engineering recommendations and technical support on design and equipment procurement. Assist with cost allocation/estimation, budgeting, resource planning, scheduling, and project management. Establish technical standards in reviews, documentation, and designs. Follow design during construction to ensure compliance with standards and testing requirements. Lead on-site electrical safety maintenance to avoid downtime and ensure risk management. Provide electrical technical support to new site development. Communicate engineering information across teams and departments. Liaise with internal stakeholders in both local and international locations. Requirements Professional Engineer certification. Bachelor's degree in Electrical Engineering with a focus on Power Systems. 3-8 years of experience in medium and high voltage power systems design. Knowledge of power distribution equipment and analysis techniques. Strong communication skills and attention to detail. Ability to work collaboratively in teams. Willingness to travel as required. Benefits Culture that values authenticity and diversity. Inclusive environment with open workspaces. Fast-growing industry with networking opportunities. Direct contribution to the digital asset industry's future. Involvement in new projects and process development. Opportunities for personal accountability and fast growth. Attractive benefits and developmental opportunities such as training and mentoring. Why Apply Through Jobgether? We use an AI-powered matching process to ensure your application is reviewed quickly, objectively, and fairly against the role's core requirements. Our system identifies the top-fitting candidates, and this shortlist is then shared directly with the hiring company. The final decision and next steps (interviews, assessments) are managed by their internal team. We appreciate your interest and wish you the best!Data Privacy Notice: By submitting your application, you acknowledge that Jobgether will process your personal data to evaluate your candidacy and share relevant information with the hiring employer. This processing is based on legitimate interest and pre-contractual measures under applicable data protection laws (including GDPR). You may exercise your rights (access, rectification, erasure, objection) at any time.

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together. Role description: Arcadis is seeking an Electrical Engineer, with strong background in the water-wastewater industry, to join our Resilience Water team in the Columbus, OH area. The primary focus of this role will be to provide technical and design consulting services with a focus on electrical power distribution, electrical controls, lighting, and communications, to support projects for the Water Division. Role accountabilities: This role will serve as Arcadis' main point of contact for clients' electrical needs and support projects and clients in the planning, design, and construction of water/wastewater facilities and similar industrial projects. This position will assist in developing project management skills, including managing project budgets, coordinating delivery schedules, and ensuring successful execution of scope, schedule, and budget. Other duties include: Perform electrical design and coordination tasks with focus on power distribution, lighting systems, communication systems, fire alarm systems and control systems Utilize CAD software (Autodesk and Bentley products) for electrical system design and documentation Establish design criteria and perform design calculations Develop electrical design documents including one-line diagrams, control schematics, electrical plans and specifications Provide engineering services during construction, review equipment submittals and shop drawings and respond to contractor RFIs (Requests for Information) Conduct field inspections to identify deviations from design and ensure safety compliance during construction Perform electrical system analysis using tools such as ETAP, SKM Power Tools and other power systems analysis software Travel as required to meet project needs Required Qualifications: Bachelor's degree in Electrical Engineering, Electrical Engineering Technology, a related discipline or equivalent work experience. Minimum of 5 years of relevant experience. EIT or Professional Engineer (PE). Why Arcadis? We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It's why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. You'll do meaningful work, and no matter what role, you'll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Join Arcadis. Create a Legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity and affirmative action employer. Women, minorities, people with disabilities and veterans are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, gender identity, citizenship status, disability, veteran status, or any other basis prohibited by law. Arcadis offers benefits for full time and part time positions. These benefits include medical, dental, and vision, EAP, 401K, STD, LTD, AD&D, life insurance, paid parental leave, reward & recognition program and optional benefits including wellbeing benefits, adoption assistance and tuition reimbursement. We offer nine paid holidays and 15 days PTO that accrue per year. The salary range for this position is $80,461 - $132,761. Actual salaries will vary and are based on several factors, such as experience, education, budget, internal equity, project and location. #LI-RT4 #Resilience-NA #Water-NA #Water-NA-D&E

Vertiv is seeking a highly skilled Electrical System Engineer to join our team and focus on the design, development, and validation of Static Transfer Switch (STS) and Power Distribution Unit (PDU) 3-phase power products. The ideal candidate will have deep knowledge of electrical systems, including industry standards, controls and monitoring systems, circuit breaker specifications, and system performance. The engineer will play a critical role in ensuring our products meet customer requirements and perform reliably in the field. This position will be based onsite at our Delaware, OH facility. Responsibilities: Lead the design and development of STS and PDU 3-phase power products, ensuring compliance with relevant industry standards (UL, IEC, NEC, etc.) and customer specifications. Work closely with product mangers and project engineers to understand technical requirements and translate them into detailed engineering specifications. Specify site planning data, including power distribution layouts, cable sizing, and environmental considerations to ensure successful product integration. Specify circuit breakers and develop circuit breaker coordination schemes to optimize protection and reliability in power distribution systems. Develop control system designs and schematics by integrating Vertiv's digital and analog controls for monitoring and managing power distribution systems. Develop and execute test plans to validate the thermal performance, electromagnetic interference (EMI), metering and controls accuracy/performance, and withstand fault performance of the STS and PDU units. Ensure that all designs and implementations adhere to the latest industry standards and regulatory requirements. Prepare detailed technical documentation, including design specifications, test reports, and schematics. Review and provide feedback for user manuals and other customer facing documentation. Work closely with cross-functional teams, including mechanical engineers, firmware developers, and manufacturing teams, to ensure the seamless integration and deployment of products. Identify areas requiring process improvement or documentation. Work with management to execute improvements. Requirements: Bachelor's Degree in Electrical Engineering; Master's Degree a plus 3+ years of experience in product development and testing. Ability to analyze and resolve complex problems with minimal guidance. Experience with 3 phase power and conversion/conditioning products preferred, but not required. Understanding of industry standards (UL, IEC, NEC) and their application in product design and development Proficient in Microsoft Outlook, Excel, PowerPoint, and Word. Strong communication and organizational skills with ability to summarize technical data/results quickly for non-technical audiences. Mostly sedentary desk work, must be able to occasionally work in a power test lab environment, including lifting objects, running cables, or stepping over/around objects Ability to lift and carry up to 25 pounds. Travel as required, domestic and international, 0-10% The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES • Customer Focus • Operational Excellence • High-Performance Culture • Innovation • Financial Strength OUR BEHAVIORS • Own It • Act With Urgency • Foster a Customer-First Mindset • Think Big and Execute • Lead by Example • Drive Continuous Improvement • Learn and Seek Out Development About Vertiv Vertiv is a $8.0 billion global critical infrastructure and data center technology company. We ensure customers' vital applications run continuously by bringing together hardware, software, analytics and ongoing services. Our portfolio includes power, cooling and IT infrastructure solutions and services that extends from the cloud to the edge of the network. Headquartered in Columbus, Ohio, USA, Vertiv employs around 31,000 people and does business in more than 130 countries. Visit Vertiv.com to learn more. Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. Equal Opportunity Employer Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************. #LI-RB1

Job Description JOB FUNCTION: 1. The Electrical Systems Engineer is responsible for all electrical aspects of an assigned project. 2. Ability to work on multiple projects simultaneously and communicate team priorities. 3. May be asked to assist with the training and development of team members. 4. Knowledgeable with all aspects of MPW equipment and able to create high-level design concepts based on sales level information. Interact with internal and external customers at all levels. ESSENTIAL FUNCTIONS: CORE RESPONSIBILITIES: Safety 1. Follow all safety rules, regulations and ensure all personnel abide by safety guidelines. Design 2. Will lead and manage projects using industry best practices for, but not limited to: 3. Electrical Power Distribution Systems (480VAC 3Ph to Low Voltage Control Power) 4. Control System Architecture including Safety, Instrumentation, PLC, and network design. 5. Control Panel Component Selection and Layout 6. Panel and System Fabrication Shop Support 7. Validate teams engineering design deliverables against MPW and Industry best practices. Programming 8. Competent in PLC and HMI programming following MPW's standard programming practices, considering safety at all levels in the program. 9. Program new systems based on developed Control Narratives and P&IDs. 10. Ability to validate programs from others against MPW and Industry best practices. Testing and Quality Control 11. Will develop and maintain MPW testing procedures and quality control standards for complex equipment. 12. Will assist with team oversight to ensure procedures are followed to ensure proper system functionality and achieve the highest level of customer satisfaction. 13. Test equipment following developed schedules and plans, communicate testing status to all levels within MPW. ADDITIONAL RESPONSIBILITIES: 1. This position handles workforce, equipment, and customer relations in multiple, geographically dispersed locations. 2. Due to the nature of the business as a 24/7 service company, non-traditional availability may be required as a regular part of the job. 3. Travel to field services sites, and customer sites as needed. Up to 60 nights travel required. 4. This position is a member of the MPW Management Team and called upon to facilitate the performance of all of members of MPW. QUALIFICATIONS: 1. Bachelor's degree in electrical or computer engineering with 1-year minimum in engineering related field 2. Associate degree with 3-years minimum technical experience dealing directly with power distribution, control system design and programming, control system networking. 3. Practical knowledge in Power and Controls design. Experience with Allen Bradley control systems preferred. Factory Talk experience preferred. 4. Practical knowledge of Ethernet I/P Networking 5. Experience with AutoCAD drafting preferred. 6. Familiarity with NEC electrical codes and compliance.