Service Mechanic jobs at Sunstate Equipment Co.

- 564 jobs

Field Mechanic
MYR Group 4.1
Odessa, TX jobs
About the Role: The Field Mechanic with MYR Group you'll travel to project sites across the designated service area, supporting our field teams. You'll use your skills to perform maintenance, preventive maintenance, and minor equipment repairs safely and professionally. Every day, you can improve and challenge yourself, and if you have the desire and ambition, you'll have the potential to work toward higher-level roles in our Fleet Department. Like every team member, we will rely on you to provide exceptional customer service to internal customers. This position requires significant travel in the state of Texas, (including overnight) to project locations, supporting teams to ensure successful operation of the equipment. At times, the Mechanic will be required to respond to emergencies outside regular work hours and work overtime including weekends and holidays. To support these travel requirements, a company vehicle, fuel card, and lodging will be provided. Company Overview With roots dating to 1891 and 8,500+ employees, MYR Group is a publicly traded holding company of 13 specialty electrical construction companies. MYR Group and our subsidiaries work on large-scale electrical construction projects throughout the U.S. and Canada. We contribute to a clean energy future while fostering a safe, supportive, and inclusive work environment. Our culture is built on shared values and mutual respect, where teamwork and collaboration occur naturally. Throughout our history, we have partnered with utilities, municipalities, commercial clients, and developers to deliver some of the largest and most notable projects including transmission/distribution/substation, commercial and industrial, storm restoration, and renewable (solar and wind farms) energy. We are consistently recognized as one of the top five specialty electrical construction firms by Engineering News Record. Essential Functions This is considered an advance-level skilled or career level position Perform mechanic assignments using independent judgment to make decisions requiring the application of procedures and practices to specific work situations Perform a full range of servicing and repairs on various types of fleet equipment, including malfunctioning parts and systems. Ensure compliance with manufacturer guidelines and company schedules Frequently travel to customer job sites for repair/maintenance of equipment. Must maintain service vehicle in a clean and professional manner May provide oversight for less experienced mechanics Perform routine and preventive maintenance, inspections, and repairs Identify mechanical problems either visually or with computer diagnostic equipment Maintain records of time and materials used on each job, the condition of the equipment, and the repairs performed Track information in computer software; ensure repair orders and weekly timesheets are complete and accurate Conduct safety inspections of equipment and prepare safety documentation Work in accordance with DOT, Environmental Protection Agency (EPA), Interstate Authority, Occupational Safety and Health Administration (OSHA), and other rules and regulations as required Participate in training programs; maintain and update safety skills and knowledge; keep current with hazardous material training requirements Other duties as assigned Regular and predictable attendance Essential functions of this position are to be performed at a Company-designated office or field location Understand and comply with the Company's Code of Business Conduct and Ethics Policy and other industry-specific professional and ethical standards About You: Qualifications Must have three to five years of experience in general mobile heavy truck repair, automotive repair, or equipment repair; equivalent trade school/technical school time may be applied toward this requirement OR have completed a vocational/technical school program or apprenticeship in vehicle and equipment repair and have four years of experience. Must be capable of operating company vehicles and equipment on a daily basis. The employee must have the ability to drive and have proper licensing. Must be at least 18 years of age. High School Diploma or equivalent preferred but not required. Knowledge/Skills/Abilities Must be reliable and have a strong work ethic Proven ability to work independently and without direct supervision Good teamwork skills to work effectively with coworkers Ability to communicate effectively to converse with employees, read orders and work instructions, and make accurate entries in the daily log Basic computer or data entry skills Solid experience using mechanical tools, materials, and testing equipment Solid knowledge of design, adjustment, operation, maintenance, and repair of vehicles and equipment Ability to follow posted safety rules and safe operating procedures Good understanding of applicable regulatory guidelines and rules Physical Requirements/Working Conditions Must be reliable and have a strong work ethic Proven ability to work independently and without direct supervision Good teamwork skills to work effectively with coworkers Ability to communicate effectively to converse with employees, read orders and work instructions, and make accurate entries in the daily log Basic computer or data entry skills Solid experience using mechanical tools, materials, and testing equipment Solid knowledge of design, adjustment, operation, maintenance, and repair of vehicles and equipment Ability to follow posted safety rules and safe operating procedures Good understanding of applicable regulatory guidelines and rules What We Offer: Compensation & Benefits Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. MYR Group reserves the right to adjust ranges depending on the qualifications of the selected candidate. Medical, Basic Vision, Regenexx, Teledoc, Hearing, Mental Health (Low deductibles and out-of-pocket maximums) - $15 weekly premium for employee or employee plus family coverage. Dental - 100% employer-paid premium. ThrivePass Health & Wellness Reimbursement Program - $300 quarterly, $1,200 annually for health and wellbeing-related purchases. Annual Paid Time Off starting at 15 days plus 10 paid Holidays (Cultural Celebration Day is a floating holiday). Generous 401(k) Plan with 100% match up to 6%; immediate vesting, and Annual profit-sharing potential. Superior educational assistance program (support for educational costs, internal training, and more!). Company-paid short and long-term disability, life, and accidental death & dismemberment. Company-paid business travel accident insurance. Employee Assistance Plan (EAP). Various voluntary plans available including supplemental vision, accident and critical illness, ID theft, group legal, group auto & home, and additional voluntary life insurance plans for employees and dependents. Tool/boot allowance ($250 per quarter). Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at **************. MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. Appcast: #apphigh LinkedIn Recruiter Assignment (your initials): #LI-JS1 LinkedIn Workplace: #LI-Hybrid
$38k-50k yearly est. 5d ago
Field Mechanic
MYR Group 4.1
Waco, TX jobs
About the Role: The Field Mechanic with MYR Group you'll travel to project sites across the designated service area, supporting our field teams. You'll use your skills to perform maintenance, preventive maintenance, and minor equipment repairs safely and professionally. Every day, you can improve and challenge yourself, and if you have the desire and ambition, you'll have the potential to work toward higher-level roles in our Fleet Department. Like every team member, we will rely on you to provide exceptional customer service to internal customers. This position requires significant travel in the state of Texas, (including overnight) to project locations, supporting teams to ensure successful operation of the equipment. At times, the Mechanic will be required to respond to emergencies outside regular work hours and work overtime including weekends and holidays. To support these travel requirements, a company vehicle, fuel card, and lodging will be provided. Company Overview With roots dating to 1891 and 8,500+ employees, MYR Group is a publicly traded holding company of 13 specialty electrical construction companies. MYR Group and our subsidiaries work on large-scale electrical construction projects throughout the U.S. and Canada. We contribute to a clean energy future while fostering a safe, supportive, and inclusive work environment. Our culture is built on shared values and mutual respect, where teamwork and collaboration occur naturally. Throughout our history, we have partnered with utilities, municipalities, commercial clients, and developers to deliver some of the largest and most notable projects including transmission/distribution/substation, commercial and industrial, storm restoration, and renewable (solar and wind farms) energy. We are consistently recognized as one of the top five specialty electrical construction firms by Engineering News Record. Essential Functions This is considered an advance-level skilled or career level position Perform mechanic assignments using independent judgment to make decisions requiring the application of procedures and practices to specific work situations Perform a full range of servicing and repairs on various types of fleet equipment, including malfunctioning parts and systems. Ensure compliance with manufacturer guidelines and company schedules Frequently travel to customer job sites for repair/maintenance of equipment. Must maintain service vehicle in a clean and professional manner May provide oversight for less experienced mechanics Perform routine and preventive maintenance, inspections, and repairs Identify mechanical problems either visually or with computer diagnostic equipment Maintain records of time and materials used on each job, the condition of the equipment, and the repairs performed Track information in computer software; ensure repair orders and weekly timesheets are complete and accurate Conduct safety inspections of equipment and prepare safety documentation Work in accordance with DOT, Environmental Protection Agency (EPA), Interstate Authority, Occupational Safety and Health Administration (OSHA), and other rules and regulations as required Participate in training programs; maintain and update safety skills and knowledge; keep current with hazardous material training requirements Other duties as assigned Regular and predictable attendance Essential functions of this position are to be performed at a Company-designated office or field location Understand and comply with the Company's Code of Business Conduct and Ethics Policy and other industry-specific professional and ethical standards About You: Qualifications Must have three to five years of experience in general mobile heavy truck repair, automotive repair, or equipment repair; equivalent trade school/technical school time may be applied toward this requirement OR have completed a vocational/technical school program or apprenticeship in vehicle and equipment repair and have four years of experience. Must be capable of operating company vehicles and equipment on a daily basis. The employee must have the ability to drive and have proper licensing. Must be at least 18 years of age. High School Diploma or equivalent preferred but not required. Knowledge/Skills/Abilities Must be reliable and have a strong work ethic Proven ability to work independently and without direct supervision Good teamwork skills to work effectively with coworkers Ability to communicate effectively to converse with employees, read orders and work instructions, and make accurate entries in the daily log Basic computer or data entry skills Solid experience using mechanical tools, materials, and testing equipment Solid knowledge of design, adjustment, operation, maintenance, and repair of vehicles and equipment Ability to follow posted safety rules and safe operating procedures Good understanding of applicable regulatory guidelines and rules Physical Requirements/Working Conditions Must be reliable and have a strong work ethic Proven ability to work independently and without direct supervision Good teamwork skills to work effectively with coworkers Ability to communicate effectively to converse with employees, read orders and work instructions, and make accurate entries in the daily log Basic computer or data entry skills Solid experience using mechanical tools, materials, and testing equipment Solid knowledge of design, adjustment, operation, maintenance, and repair of vehicles and equipment Ability to follow posted safety rules and safe operating procedures Good understanding of applicable regulatory guidelines and rules What We Offer: Compensation & Benefits Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. MYR Group reserves the right to adjust ranges depending on the qualifications of the selected candidate. Medical, Basic Vision, Regenexx, Teledoc, Hearing, Mental Health (Low deductibles and out-of-pocket maximums) - $15 weekly premium for employee or employee plus family coverage. Dental - 100% employer-paid premium. ThrivePass Health & Wellness Reimbursement Program - $300 quarterly, $1,200 annually for health and wellbeing-related purchases. Annual Paid Time Off starting at 15 days plus 10 paid Holidays (Cultural Celebration Day is a floating holiday). Generous 401(k) Plan with 100% match up to 6%; immediate vesting, and Annual profit-sharing potential. Superior educational assistance program (support for educational costs, internal training, and more!). Company-paid short and long-term disability, life, and accidental death & dismemberment. Company-paid business travel accident insurance. Employee Assistance Plan (EAP). Various voluntary plans available including supplemental vision, accident and critical illness, ID theft, group legal, group auto & home, and additional voluntary life insurance plans for employees and dependents. Tool/boot allowance ($250 per quarter). Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at **************. MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. Appcast: #apphigh LinkedIn Recruiter Assignment (your initials): #LI-JS1 LinkedIn Workplace: #LI-Hybrid
$37k-49k yearly est. 5d ago
Field Mechanic
MYR Group 4.1
Alvarado, TX jobs
About the Role: The Field Mechanic with MYR Group you'll travel to project sites across the designated service area, supporting our field teams. You'll use your skills to perform maintenance, preventive maintenance, and minor equipment repairs safely and professionally. Every day, you can improve and challenge yourself, and if you have the desire and ambition, you'll have the potential to work toward higher-level roles in our Fleet Department. Like every team member, we will rely on you to provide exceptional customer service to internal customers. This position requires significant travel in the state of Texas, (including overnight) to project locations, supporting teams to ensure successful operation of the equipment. At times, the Mechanic will be required to respond to emergencies outside regular work hours and work overtime including weekends and holidays. To support these travel requirements, a company vehicle, fuel card, and lodging will be provided. Company Overview With roots dating to 1891 and 8,500+ employees, MYR Group is a publicly traded holding company of 13 specialty electrical construction companies. MYR Group and our subsidiaries work on large-scale electrical construction projects throughout the U.S. and Canada. We contribute to a clean energy future while fostering a safe, supportive, and inclusive work environment. Our culture is built on shared values and mutual respect, where teamwork and collaboration occur naturally. Throughout our history, we have partnered with utilities, municipalities, commercial clients, and developers to deliver some of the largest and most notable projects including transmission/distribution/substation, commercial and industrial, storm restoration, and renewable (solar and wind farms) energy. We are consistently recognized as one of the top five specialty electrical construction firms by Engineering News Record. Essential Functions This is considered an advance-level skilled or career level position Perform mechanic assignments using independent judgment to make decisions requiring the application of procedures and practices to specific work situations Perform a full range of servicing and repairs on various types of fleet equipment, including malfunctioning parts and systems. Ensure compliance with manufacturer guidelines and company schedules Frequently travel to customer job sites for repair/maintenance of equipment. Must maintain service vehicle in a clean and professional manner May provide oversight for less experienced mechanics Perform routine and preventive maintenance, inspections, and repairs Identify mechanical problems either visually or with computer diagnostic equipment Maintain records of time and materials used on each job, the condition of the equipment, and the repairs performed Track information in computer software; ensure repair orders and weekly timesheets are complete and accurate Conduct safety inspections of equipment and prepare safety documentation Work in accordance with DOT, Environmental Protection Agency (EPA), Interstate Authority, Occupational Safety and Health Administration (OSHA), and other rules and regulations as required Participate in training programs; maintain and update safety skills and knowledge; keep current with hazardous material training requirements Other duties as assigned Regular and predictable attendance Essential functions of this position are to be performed at a Company-designated office or field location Understand and comply with the Company's Code of Business Conduct and Ethics Policy and other industry-specific professional and ethical standards About You: Qualifications Must have three to five years of experience in general mobile heavy truck repair, automotive repair, or equipment repair; equivalent trade school/technical school time may be applied toward this requirement OR have completed a vocational/technical school program or apprenticeship in vehicle and equipment repair and have four years of experience. Must be capable of operating company vehicles and equipment on a daily basis. The employee must have the ability to drive and have proper licensing. Must be at least 18 years of age. High School Diploma or equivalent preferred but not required. Knowledge/Skills/Abilities Must be reliable and have a strong work ethic Proven ability to work independently and without direct supervision Good teamwork skills to work effectively with coworkers Ability to communicate effectively to converse with employees, read orders and work instructions, and make accurate entries in the daily log Basic computer or data entry skills Solid experience using mechanical tools, materials, and testing equipment Solid knowledge of design, adjustment, operation, maintenance, and repair of vehicles and equipment Ability to follow posted safety rules and safe operating procedures Good understanding of applicable regulatory guidelines and rules Physical Requirements/Working Conditions Must be reliable and have a strong work ethic Proven ability to work independently and without direct supervision Good teamwork skills to work effectively with coworkers Ability to communicate effectively to converse with employees, read orders and work instructions, and make accurate entries in the daily log Basic computer or data entry skills Solid experience using mechanical tools, materials, and testing equipment Solid knowledge of design, adjustment, operation, maintenance, and repair of vehicles and equipment Ability to follow posted safety rules and safe operating procedures Good understanding of applicable regulatory guidelines and rules What We Offer: Compensation & Benefits Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. MYR Group reserves the right to adjust ranges depending on the qualifications of the selected candidate. Medical, Basic Vision, Regenexx, Teledoc, Hearing, Mental Health (Low deductibles and out-of-pocket maximums) - $15 weekly premium for employee or employee plus family coverage. Dental - 100% employer-paid premium. ThrivePass Health & Wellness Reimbursement Program - $300 quarterly, $1,200 annually for health and wellbeing-related purchases. Annual Paid Time Off starting at 15 days plus 10 paid Holidays (Cultural Celebration Day is a floating holiday). Generous 401(k) Plan with 100% match up to 6%; immediate vesting, and Annual profit-sharing potential. Superior educational assistance program (support for educational costs, internal training, and more!). Company-paid short and long-term disability, life, and accidental death & dismemberment. Company-paid business travel accident insurance. Employee Assistance Plan (EAP). Various voluntary plans available including supplemental vision, accident and critical illness, ID theft, group legal, group auto & home, and additional voluntary life insurance plans for employees and dependents. Tool/boot allowance ($250 per quarter). Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at **************. MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. Appcast: #apphigh LinkedIn Recruiter Assignment (your initials): #LI-JS1 LinkedIn Workplace: #LI-Hybrid
$37k-49k yearly est. 5d ago
Mechanic in North/Northeast Oklahoma
Quanta Services Inc. 4.6
Texarkana, TX jobs
About Us Southern Electric Corporation a Quanta Services, Inc. (NYSE:PWR) company, is an electrical utility contractor specializing in the construction of high-voltage transmission lines, underground, and distribution lines as well as providing emergency restoration services. A proven leader in the industry since 1985, SEC has earned a reputation of providing superior work with a strong focus on customer satisfaction and safety. We currently manage over 100 crews and nearly 2,000 pieces of late model equipment. Customers include investor-owned utilities, electric cooperatives, and municipalities throughout our work footprint. Our team is our family. We are 100% committed to the safety of our team members and providing industry leading training. We believe we can be the last job you ever want to apply for. Call us family! About this Role Mechanic at Southern Electric Corporation shall possess the ability to operate/drive any truck, including tractor trailers in order to support all assigned work activity. Employee must have three (3) years' experience and possess a valid commercial driver's license. What You'll Do * Analyzes malfunctions and repairs, rebuilds and maintains motor vehicles and construction equipment, such as pickup trucks and heavier trucks ranging from ½ ton to 10 ton GVWR, company automobiles, cranes, power shovels, digger derricks, aerial lift equipment, motor graders, trench-digging machines, conveyors, bulldozers, pumps, compressors, portable generators, portable power supplies, hydraulic press heads and motors and pneumatic tools. * Operates and inspects machines or equipment to diagnose defects. * Dismantles and reassembles equipment, using hoist and hand tools. * Examines parts for damage or excessive wear, using test equipment and gauges. * Tests overhauled equipment to ensure operating efficiency. * May weld or have welded broken parts and structural members. * May fabricate or have fabricated, parts or devices used in the construction and/or maintenance of power and telecommunication systems. * May direct workers engaged in cleaning parts and assist with assembly and disassembly of equipment. * May repair, adjust and maintain specialized machinery, such as conductor pullers, tensioners, spacer buggies, drilling and cutting equipment. * Plans work procedure, using charts, technical manuals, and experience. * Raises equipment using hydraulic jack or hoist, to gain access to mechanical units bolted to underside of equipment. * Remove as needed, engine, transmission, or differential, using wrenches and hoist. * Disassembles unit and inspects parts for wear, using test equipment, calipers, and thickness gauges. * May repair, replace parts or send equipment off to have parts, such as pistons, rods, gears, valves and bearing replaced. * Overhauls or replaces carburetors, fuel injection systems, blowers, generators, distributors, starters, and pumps. * May rebuild or send off to be rebuilt crankshafts and cylinder blocks, valve heads, etc. * Rewires ignition system, lights, and instrument panel. * Relines and adjusts brakes, aligns front end, repairs, or replaces shock absorbers and solders leak in radiator. * Mend damaged body and fenders by hammering out or filling in dents and welded broken parts. * Replaces and adjusts headlights, and installs and repairs accessories, such as radios, heaters, mirrors, and windshield wipers. * Identify safety equipment on a specific piece of equipment. * Read and use the operations manual of a specific piece of equipment. * Perform general cleanup of equipment. * Identify components and controls of machine. * Able to perform daily walk arounds, routine and periodic checks, inspections, and the maintenance of equipment. * Learn and interpret proper hand signals. * Perform basic operation of equipment. * Assist with the adjustment of brakes and clutches. * Assist with the service and maintenance schedule of the equipment. * Read and use all capacity charts for the equipment. * Perform the setup of the equipment, connect, and disconnect trailers. * Capable of loading and unloading equipment and materials. * Capable of securing loads on trailers. * Adheres to all Company and Safety Policies while conducting Company business. * Shall attend training classes as prescribed by the Training Department. * Capable of operating most construction equipment, booms, etc. if needed. * May also perform other duties as needed. * Trustworthy and safety minded and must be conversant with all safety procedures/requirements applicable to the equipment. * Have the ability to spot or recognize potential danger areas and take evasive actions on his/her own initiative. What You'll Bring * May be required to relocate as work requirements demand. * Is required to hold a valid commercial driver's license. * Is required to maintain a current Medical Certification Card. * May be required to obtain light crane certification for boom trucks etc. * May work in storm restoration operations to rebuild and/or repair damaged power systems. * May attend training classes or seminars to gather knowledge of new processes, safety regulations and/or refresher training. * All individuals in this personnel classification must meet requirements of OSHA standard 29 CFT 1910 for the specific operated equipment. Physical Qualifications * Lifting and handling materials up to 60 pounds unassisted. * Walking and working across uneven terrain. * Exposure to hot and cold weather conditions * Climbing on and off large trucks and equipment. What You'll Get * Medical * Dental * Vision * 401K Equal Opportunity Employer All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, national origin or ancestry, sex (including gender, pregnancy, sexual orientation, and/or gender identity), age, disability, genetic information, veteran status, and/or any other basis protected by applicable federal, state or local law.We are an Equal Opportunity Employer, including disability and protected veteran status. We prohibit all types of discrimination and are committed to providing access and equal opportunity for individuals with disabilities. For additional information or if reasonable accommodation is needed to participate in the job application, interview, or hiring processes or to perform the essential functions of a position, please contact us the Company's Human Resources department.
$40k-51k yearly est. Auto-Apply 58d ago
MECHANIC II (Heavy Equipment)
The Branch Group Inc. 4.1
Greensboro, NC jobs
Branch is searching for an experienced and safety-oriented Mechanic to join our well-established, growing company. The Heavy Equipment Mechanic II is a skilled journey-level position responsible for performing preventive maintenance, diagnostics, and repairs on a variety of heavy construction equipment. This role requires troubleshooting skills, the ability to work independently with minimal supervision, and the capability to train and mentor entry-level mechanics. Duties/Responsibilities * Perform scheduled preventive maintenance services, adjustments, and equipment overhauls. * Utilize diagnostic tools, service manuals, and electronic equipment to identify and resolve mechanical issues. * Inspect, diagnose, and repair diesel and gasoline engines, hydraulic systems, transmissions, electrical systems, and undercarriages on heavy construction equipment. * Repair and service equipment such as bulldozers, excavators, graders, loaders, backhoes, cranes, and other specialized machinery. * Weld, fabricate, and modify equipment parts as needed to maintain operational standards. * Maintain accurate service records, work orders, and parts usage in compliance with company procedures. * Adhere to safety protocols, PPE standards, and environmental regulations while performing work. * Provide guidance and mentorship to Heavy Equipment Mechanic I positions and apprentices. * Assist in road calls and field repairs to minimize equipment downtime. * May perform other related duties as assigned. Duties/Responsibilities Cont. Qualifications * High school diploma or equivalent; completion of a vocational or technical program in heavy equipment repair preferred. * Minimum of 3-5 years of experience as a heavy equipment mechanic, including at least 2 years in construction equipment repair. * Valid driver's license (CDL preferred or ability to obtain). * Manufacturer or industry certifications (e.g., Caterpillar, John Deere, ASE Medium/Heavy Truck) highly desirable. * Ability to lift up to 75 lbs. and work in outdoor environments under varying weather conditions. Competencies Dependability Following Policies and Procedures Working Safely Productivity Delivering High Quality Work Travel Supervisory Responsibility Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to use hands and fingers to handle, feel or operate objects, tools or controls, and reach with hands and arms. The employee is frequently required to stand, talk and hear. The employee is occasionally required to walk, sit, climb, balance, stoop, kneel, crouch, crawl, taste and smell. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus Position Type/Expected Hours of Work This is a full-time position which will typically involve 40+ hours a week. Due to the nature of the job, the employee must be available on-call early/late hours to deal with delays, bad weather and emergencies at the job site. AAP/EEO Statement It has been and will continue to be a fundamental policy of the Company not to discriminate on the basis of race, color, religion, sex, national origin, age, disability, sexual orientation, gender identity, or status as a veteran, or any other basis protected by applicable federal, state or local law, with respect to recruitment, hiring, training, promotion, and other terms and condition of employment. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Nearest Major Market: Greensboro Apply now " Find similar jobs: * Careers Home * View All Jobs * Benefits * Life at Branch * branchgroup.com * * * Copyright 2025
$42k-54k yearly est. 35d ago
Mechanic
Centuri Group 3.7
Laredo, TX jobs
Who We Are Centuri Group is comprised of a family of companies that make up a utility infrastructure enterprise, operating throughout the US and Canada, committed to safely delivering gas, electric and utility services to our customers and the community. We help you build your career on Solid Ground by investing in your development and valuing your unique skills, perspective, and background. Employees are the lifeblood of our organization, and we're committed to providing a stable foundation to continuously grow and thrive. We've got work for the next 100 years - All we need is you! At Linetec our Mechanics bring a strong base of mechanical knowledge and experience including with tools, equipment, and vehicles. You should possess a great work ethic, a willingness to learn new machines, and be accustomed to the mechanic's trade. You will encompass a variety of functions that are critical to the success of Linetec. CDL strongly preferred or ability to acquire CDL permit within 60 days of hire. What You'll Do * Perform basic welding tasks * Repair, over haul and replace major truck and automobile components * Communicate with fellow team members regarding broken equipment, repairs that need to be made, timelines and costs * Service equipment when returned from a job site * Make major and minor repairs to equipment * Maintain log books of repairs * Complete required company training, including safety training * Perform Administrative and Lineman duties as required * Perform other responsibilities as requested by leadership What You'll Have * High school diploma or GED required * Must meet the requirements for Mechanic level I * Skilled in Mechanical operations including welding, vehicle and small equipment repair * CDL strongly preferred or ability to acquire CDL permit within 60 days of hire * Ability to follow through on tasks * Possess a customer service attitude * Excellent multitasking, problem solving and critical thinking skills * Ability to maintain flexibility in a fast-paced environment * Willing to learn our standard processes and procedures * Desire to learn and commitment to doing quality work while putting safety first * Will be required at times to travel to job sites to make repairs What You'll Get * Benefit Package including Medical, Dental and Vision Coverage * 401K w/ Company Match * Voluntary Life & AD&D Insurance and Short-Term and Long-Term Disability * Vacation/Sick Time and Paid Holidays * Potential Bonus Opportunities * Career Development Opportunities * Employee Discounts * Weekly Payroll Work Environment * Work sites are outdoors in potentially extreme weather conditions * All worksite safety instructions are written and spoken in English; must be fluent in English * Work includes prolonged and repeated: lifting (including overhead, up to 50lbs); standing; climbing; kneeling; reaching and feeling; crouching and crawling * Work is performed within the "red zone" of heavy equipment * Working safely requires quick/accurate hand-eye coordination and the ability to work in a constant state of alertness and safe manner Legal Stuff * Pass pre-employment, random, post-accident, and reasonable suspicion drug screens * Provide valid US work authorization documents for E-Verify * Satisfactory results of pre-employment background check results * Valid driver's license with clean driving record is required * Pre-employment medical fit-for-duty test; hold/obtain DOT medical card Diversity, Equity & Inclusion Commitment This job description is subject to change at any time. It reflects management's assignment of essential functions, and does not exclude or restrict the tasks that may be assigned. Centuri and its subsidiary companies will provide equal employment opportunities to all applicants without regard to an applicant's race, color, religion, sex, gender, genetic information, national origin, age, veteran status, disability, or any other status protected by federal, state or local law. Centuri will provide reasonable accommodations to allow an applicant to participate in the hiring process (e.g., accommodations for a test or job interview) if so requested. Centuri is a Department of Transportation regulated employer. Certain safety-sensitive positions are covered under the DOT Drug and Alcohol Testing Regulations, 49 CFR Part 40. It is important to note that marijuana remains a drug listed in Schedule I of the Controlled Substances Act. It remains unacceptable for any safety-sensitive employee subject to drug testing under the company's Drug Free Workplace Policy to use or test positive for marijuana. Nearest Major Market: San Antonio Nearest Secondary Market: San Antonio
$33k-45k yearly est. 60d+ ago
Mechanic
Ozinga 4.3
Sussex, WI jobs
DOT Employer Name Ozinga Ready Mix Concrete Inc DOT Employer Address 5129 W Franklin Dr. Franklin, WI 53132 Overview Pay: $27. 12 - $33. 90 Hourly Summary: A Mechanic is responsible for the maintenance of all equipment, including but not limited to the following machines: Wheel loaders, forklifts, material handlers, and help with plant maintenance when needed. Principal Duties and Responsibilities: •Repair and replace damaged or worn parts in a timely manner to support deliveries •Dismantle and reassemble heavy equipment using hoists and various hand tools •Adjust points, spark plug gaps, valves, distributors, fuel injection and carburetors •Clean, lubricate, and perform other routine maintenance work on equipment and vehicles •Overhaul and test machines or equipment to ensure operating efficiency •Maintain and repair gasoline, diesel & natural gas-powered equipment & trucks, including raising equipment using hydraulic jacks or hoists •Operate and inspect machines or heavy equipment to diagnose any defects •Test mechanical products and equipment after repair or assembly to ensure proper function and performance, and compliance with manufacturers' specifications •Fit bearings to adjust, repair, or overhaul mobile mechanical, hydraulic, and pneumatic equipment •Keep detailed records with time spent, materials used, and parts ordered •Diagnose faults or malfunctions to determine required repairs, using engine diagnostic equipment such as computerized test equipment & calibration devices •Examine parts for damage or excessive wear •Consistently maintain all safety precautions, using all safety gear and protective equipment •Utilize proper safety techniques and equipment when necessary Employee Relations: •Work effectively with co-workers •Proactive in alerting management of any unsafe act or condition to prevent injuries Global Responsibilities: •Regular attendance and physical presence at work is an essential function of this position •This job may require additional duties not listed above and the employee may be asked to perform those duties to meet business needs Qualifications: Education/Specialized Knowledge/Professional Certifications: •High School Diploma or equivalent required •Valid Commercial Driver's License (CDL), minimum Class B preferred •Air brake certification preferred •Knowledge of repair on components of heavy trucks and equipment including suspensions, hydraulics, drivelines, electrical systems, brakes, and engines Experience: •Minimum 2 years-experience in heavy truck repair and maintenance •Hydraulic experience preferred •Diesel engine technician experience required Skills/Abilities: •Operate industrial power and hand tools •Ability to adapt to changes and procedures •Use effective written and oral communication skills •Perform the job safely by demonstrating full awareness of his/her surroundings •Ability to drive standard and automatic transmission trucks •Ability to drive heavy trucks and operate equipment such as forklift sand end loaders Working Conditions: •Operation within a fast-paced environment •Noise level is usually moderate, but can be high and requires personal hearing protection on occasion at job sites, plants, and laboratories •Work indoors and outdoors in all types of weather •Work may occur on construction sites with uneven ground conditions •Local travel required Physical Requirements: •Regularly required to talk or hear; frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms •Occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl •Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus Operate buttons, levers, and other controls located on various equipment •Work through stressful situations while maintaining professionalism and composure •Must be able to operate buttons, levers, and other controls located on various equipment •Must be able to maneuver in and around our plants, yards and jobsites as necessary •Move/lift up to 50 pounds frequently •Move/lift at least 100 pounds occasionally Ozinga is an Equal Opportunity Employer. We consider applications for all positions without regard to race, color, religion, creed, gender, national origin, age, disability, sexual orientation, citizenship status, genetic information, or any other legally protected status.
$27.1-33.9 hourly Auto-Apply 60d+ ago
Mechanic
Ozinga 4.3
West Bend, WI jobs
DOT Employer Name Ozinga Ready Mix Concrete Inc DOT Employer Address 5129 W Franklin Dr. Franklin, WI 53132 Overview Pay: $27. 12 - $33. 90 Hourly Summary: A Mechanic is responsible for the maintenance of all equipment, including but not limited to the following machines: Wheel loaders, forklifts, material handlers, and help with plant maintenance when needed. Principal Duties and Responsibilities: •Repair and replace damaged or worn parts in a timely manner to support deliveries •Dismantle and reassemble heavy equipment using hoists and various hand tools •Adjust points, spark plug gaps, valves, distributors, fuel injection and carburetors •Clean, lubricate, and perform other routine maintenance work on equipment and vehicles •Overhaul and test machines or equipment to ensure operating efficiency •Maintain and repair gasoline, diesel & natural gas-powered equipment & trucks, including raising equipment using hydraulic jacks or hoists •Operate and inspect machines or heavy equipment to diagnose any defects •Test mechanical products and equipment after repair or assembly to ensure proper function and performance, and compliance with manufacturers' specifications •Fit bearings to adjust, repair, or overhaul mobile mechanical, hydraulic, and pneumatic equipment •Keep detailed records with time spent, materials used, and parts ordered •Diagnose faults or malfunctions to determine required repairs, using engine diagnostic equipment such as computerized test equipment & calibration devices •Examine parts for damage or excessive wear •Consistently maintain all safety precautions, using all safety gear and protective equipment •Utilize proper safety techniques and equipment when necessary Employee Relations: •Work effectively with co-workers •Proactive in alerting management of any unsafe act or condition to prevent injuries Global Responsibilities: •Regular attendance and physical presence at work is an essential function of this position •This job may require additional duties not listed above and the employee may be asked to perform those duties to meet business needs Qualifications: Education/Specialized Knowledge/Professional Certifications: •High School Diploma or equivalent required •Valid Commercial Driver's License (CDL), minimum Class B preferred •Air brake certification preferred •Knowledge of repair on components of heavy trucks and equipment including suspensions, hydraulics, drivelines, electrical systems, brakes, and engines Experience: •Minimum 2 years-experience in heavy truck repair and maintenance •Hydraulic experience preferred •Diesel engine technician experience required Skills/Abilities: •Operate industrial power and hand tools •Ability to adapt to changes and procedures •Use effective written and oral communication skills •Perform the job safely by demonstrating full awareness of his/her surroundings •Ability to drive standard and automatic transmission trucks •Ability to drive heavy trucks and operate equipment such as forklift sand end loaders Working Conditions: •Operation within a fast-paced environment •Noise level is usually moderate, but can be high and requires personal hearing protection on occasion at job sites, plants, and laboratories •Work indoors and outdoors in all types of weather •Work may occur on construction sites with uneven ground conditions •Local travel required Physical Requirements: •Regularly required to talk or hear; frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms •Occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl •Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus Operate buttons, levers, and other controls located on various equipment •Work through stressful situations while maintaining professionalism and composure •Must be able to operate buttons, levers, and other controls located on various equipment •Must be able to maneuver in and around our plants, yards and jobsites as necessary •Move/lift up to 50 pounds frequently •Move/lift at least 100 pounds occasionally Benefits Information: In alignment with our Bargaining Agreement, we are proud to partner with our Union representatives to provide a benefits package that is both competitive and tailored to meet the needs of our employees and their families. These thoughtfully designed plans typically include: Health Insurance - Supporting your overall wellness. Dental and Vision Coverage - Ensuring comprehensive care for you and your loved ones. Voluntary Benefits - Helping you to cover unexpected expenses. Retirement Plans - Helping you prepare for a secure and peaceful future. Paid Time Off and Holiday Pay - Giving you time to recharge and enjoy life's moments. At Ozinga, we believe in creating a workplace where every co-worker feels valued and supported. Join us and experience the difference of working for a company that truly cares! Ozinga is an Equal Opportunity Employer. We consider applications for all positions without regard to race, color, religion, creed, gender, national origin, age, disability, sexual orientation, citizenship status, genetic information, or any other legally protected status.
$27.1-33.9 hourly Auto-Apply 60d+ ago
Mechanic
Ozinga 4.3
Kenosha, WI jobs
DOT Employer Name Ozinga Ready Mix Inc DOT Employer Address 19001 Old LaGrange Rd. Mokena, IL 60448 Overview Pay: $27. 12 - $33. 90 Hourly + Tool Allowance Summary: A Mechanic is responsible for the maintenance of all equipment, including but not limited to the following machines: Wheel loaders, forklifts, material handlers, and help with plant maintenance when needed. Principal Duties and Responsibilities: •Repair and replace damaged or worn parts in a timely manner to support deliveries •Dismantle and reassemble heavy equipment using hoists and various hand tools •Adjust points, spark plug gaps, valves, distributors, fuel injection and carburetors •Clean, lubricate, and perform other routine maintenance work on equipment and vehicles •Overhaul and test machines or equipment to ensure operating efficiency •Maintain and repair gasoline, diesel & natural gas-powered equipment & trucks, including raising equipment using hydraulic jacks or hoists •Operate and inspect machines or heavy equipment to diagnose any defects •Test mechanical products and equipment after repair or assembly to ensure proper function and performance, and compliance with manufacturers' specifications •Fit bearings to adjust, repair, or overhaul mobile mechanical, hydraulic, and pneumatic equipment •Keep detailed records with time spent, materials used, and parts ordered •Diagnose faults or malfunctions to determine required repairs, using engine diagnostic equipment such as computerized test equipment & calibration devices •Examine parts for damage or excessive wear •Consistently maintain all safety precautions, using all safety gear and protective equipment •Utilize proper safety techniques and equipment when necessary Employee Relations: •Work effectively with co-workers •Proactive in alerting management of any unsafe act or condition to prevent injuries Global Responsibilities: •Regular attendance and physical presence at work is an essential function of this position •This job may require additional duties not listed above and the employee may be asked to perform those duties to meet business needs Qualifications: Education/Specialized Knowledge/Professional Certifications: •High School Diploma or equivalent required •Valid Commercial Driver's License (CDL), minimum Class B preferred •Air brake certification preferred •Knowledge of repair on components of heavy trucks and equipment including suspensions, hydraulics, drivelines, electrical systems, brakes, and engines Experience: •Minimum 2 years-experience in heavy truck repair and maintenance •Hydraulic experience preferred •Diesel engine technician experience required Skills/Abilities: •Operate industrial power and hand tools •Ability to adapt to changes and procedures •Use effective written and oral communication skills •Perform the job safely by demonstrating full awareness of his/her surroundings •Ability to drive standard and automatic transmission trucks •Ability to drive heavy trucks and operate equipment such as forklift sand end loaders Working Conditions: •Operation within a fast-paced environment •Noise level is usually moderate, but can be high and requires personal hearing protection on occasion at job sites, plants, and laboratories •Work indoors and outdoors in all types of weather •Work may occur on construction sites with uneven ground conditions •Local travel required Physical Requirements: •Regularly required to talk or hear; frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms •Occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl •Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus Operate buttons, levers, and other controls located on various equipment •Work through stressful situations while maintaining professionalism and composure •Must be able to operate buttons, levers, and other controls located on various equipment •Must be able to maneuver in and around our plants, yards and jobsites as necessary •Move/lift up to 50 pounds frequently •Move/lift at least 100 pounds occasionally Benefits Information: In alignment with our Bargaining Agreement, we are proud to partner with our Union representatives to provide a benefits package that is both competitive and tailored to meet the needs of our employees and their families. These thoughtfully designed plans typically include: • Health Insurance - Supporting your overall wellness. • Dental and Vision Coverage - Ensuring comprehensive care for you and your loved ones. • Voluntary Benefits - Helping you to cover unexpected expenses. • Retirement Plans - Helping you prepare for a secure and peaceful future. • Paid Time Off and Holiday Pay - Giving you time to recharge and enjoy life's moments. At Ozinga, we believe in creating a workplace where every co-worker feels valued and supported. Join us and experience the difference of working for a company that truly cares! Ozinga is an Equal Opportunity Employer. We consider applications for all positions without regard to race, color, religion, creed, gender, national origin, age, disability, sexual orientation, citizenship status, genetic information, or any other legally protected status.
$27.1-33.9 hourly Auto-Apply 60d+ ago
MECHANIC I (Heavy Equipment)
The Branch Group Inc. 4.1
Hillsborough, NC jobs
Branch is searching for an entry-level and safety-oriented Mechanic to join our well-established, growing company. The Mechanic I is responsible for assisting with the inspection, maintenance, and repair of heavy construction equipment such as bulldozers, excavators, loaders, backhoes, graders, and haul trucks. This role works under close supervision of senior mechanics and supervisors to develop technical skills and ensure the safe and efficient operation of company-owned equipment. Duties/Responsibilities * Perform routine preventative maintenance (lubrication, oil changes, filter replacements, inspections). * Assist in diagnosing mechanical, electrical, and hydraulic issues. * Complete minor repairs and adjustments under supervision. * Maintain service records and accurately document work performed. * Inspect equipment for safety hazards and report deficiencies. * Use hand tools, power tools, diagnostic equipment, and service manuals as directed. * Keep work area, tools, and shop organized and clean. * Follow company safety policies, OSHA regulations, and environmental guidelines. * Assist senior mechanics with major component repairs (engines, transmissions, hydraulics). * Ability to work independently on routine tasks and as part of a team. Duties/Responsibilities Cont. Qualifications * High school diploma or GED. * Basic training in automotive/heavy equipment repair (trade school, apprenticeship, or equivalent preferred). * 0-2 years of relevant experience. * Valid driver's license (CDL preferred or ability to obtain). * Ability to lift up to 75 lbs. and work in outdoor environments under varying weather conditions. Competencies Productivity Delivering High Quality Work Dependability Following Policies and Procedures Working Safely Travel Supervisory Responsibility Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to use hands and fingers to handle, feel or operate objects, tools or controls, and reach with hands and arms. The employee is frequently required to stand, talk and hear. The employee is occasionally required to walk, sit, climb, balance, stoop, kneel, crouch, crawl, taste and smell. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Position Type/Expected Hours of Work This is a full-time position which will typically involve 40+ hours a week. Due to the nature of the job, the employee must be available on-call early/late hours to deal with delays, bad weather and emergencies at the job site. AAP/EEO Statement It has been and will continue to be a fundamental policy of the Company not to discriminate on the basis of race, color, religion, sex, national origin, age, disability, sexual orientation, gender identity, or status as a veteran, or any other basis protected by applicable federal, state or local law, with respect to recruitment, hiring, training, promotion, and other terms and condition of employment. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Nearest Major Market: Raleigh Apply now " Find similar jobs: * Careers Home * View All Jobs * Benefits * Life at Branch * branchgroup.com * * * Copyright 2025
$42k-55k yearly est. 35d ago
MECHANIC II (Heavy Equipment)
The Branch Group Inc. 4.1
Statesville, NC jobs
Branch is searching for an experienced and safety-oriented Mechanic to join our well-established, growing company. The Heavy Equipment Mechanic II is a skilled journey-level position responsible for performing preventive maintenance, diagnostics, and repairs on a variety of heavy construction equipment. This role requires troubleshooting skills, the ability to work independently with minimal supervision, and the capability to train and mentor entry-level mechanics. Duties/Responsibilities * Perform scheduled preventive maintenance services, adjustments, and equipment overhauls. * Utilize diagnostic tools, service manuals, and electronic equipment to identify and resolve mechanical issues. * Inspect, diagnose, and repair diesel and gasoline engines, hydraulic systems, transmissions, electrical systems, and undercarriages on heavy construction equipment. * Repair and service equipment such as bulldozers, excavators, graders, loaders, backhoes, cranes, and other specialized machinery. * Weld, fabricate, and modify equipment parts as needed to maintain operational standards. * Maintain accurate service records, work orders, and parts usage in compliance with company procedures. * Adhere to safety protocols, PPE standards, and environmental regulations while performing work. * Provide guidance and mentorship to Heavy Equipment Mechanic I positions and apprentices. * Assist in road calls and field repairs to minimize equipment downtime. * May perform other related duties as assigned. Duties/Responsibilities Cont. Qualifications * High school diploma or equivalent; completion of a vocational or technical program in heavy equipment repair preferred. * Minimum of 3-5 years of experience as a heavy equipment mechanic, including at least 2 years in construction equipment repair. * Valid driver's license (CDL preferred or ability to obtain). * Manufacturer or industry certifications (e.g., Caterpillar, John Deere, ASE Medium/Heavy Truck) highly desirable. * Ability to lift up to 75 lbs. and work in outdoor environments under varying weather conditions. Competencies Dependability Following Policies and Procedures Working Safely Productivity Delivering High Quality Work Travel Supervisory Responsibility Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to use hands and fingers to handle, feel or operate objects, tools or controls, and reach with hands and arms. The employee is frequently required to stand, talk and hear. The employee is occasionally required to walk, sit, climb, balance, stoop, kneel, crouch, crawl, taste and smell. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus Position Type/Expected Hours of Work This is a full-time position which will typically involve 40+ hours a week. Due to the nature of the job, the employee must be available on-call early/late hours to deal with delays, bad weather and emergencies at the job site. AAP/EEO Statement It has been and will continue to be a fundamental policy of the Company not to discriminate on the basis of race, color, religion, sex, national origin, age, disability, sexual orientation, gender identity, or status as a veteran, or any other basis protected by applicable federal, state or local law, with respect to recruitment, hiring, training, promotion, and other terms and condition of employment. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Nearest Major Market: Hickory Apply now " Find similar jobs: * Careers Home * View All Jobs * Benefits * Life at Branch * branchgroup.com * * * Copyright 2025
$42k-54k yearly est. 35d ago
Commercial Journeyman Mechanical Insulator
Dynaten 4.0
Fort Worth, TX jobs
Launch and expand your Mechanical Insulation Career with DynaTen (a Comfort Systems USA Company), a leader in North Texas commercial construction and service solutions since 1980! DynaTen is seeking Commercial Journeyman Mechanical Insulators to join our team! As a Commercial Journeyman Mechanical Insulator, you will gain experience installing diverse Insulation products on Mechanical systems across healthcare, offices, hospitality, data centers, labs, and manufacturing facilities. This direct role plays a key part in our strategic goals and fosters strong customer relationships. We offer more than just a job: develop leadership skills, advance your career within DynaTen, and unlock long-term growth potential. Join our growing team and challenge yourself - are you a results-oriented Commercial Insulator ready for success? Responsibilities Ability to Review project documents for understanding of required Mechanical Insulation systems, Insulation product materials requirements and Insulation product installation requirements. Requires the knowledge of installing various insulation material on HVAC ductwork, mechanical piping, and pluming piping. Including duct wrap and ridged board, fiberglass pipe covering, Armaflex, Foam glass, Phenolic and PVC or Aluminum Jacketing. Self-driven nonsupervisory position that can work as an individual and with a supportive install team and construction unit. Willing to support other trade teams during Insulation down time. Ability to measure and make material lists for work areas. Work safe and efficiently with DynaTen and all project team members. Participate in training, safety training and mentoring and directing apprentices and other project team members. Maintain and Support project team with a safe and clean work environment, personal protection equipment (PPE), company tools, rentals, and personal hand tools. Fulfills responsibilities in accordance with the organization's policies and processes. Requirements 4 years of Commercial Mechanical Insulation experience. Required Hand tools for trade. OSHA 10 (DynaTen will certify if needed). Reliable transportation. Lift up to 60 pounds, handle heavier items with team, lifts, work of ladders and elevated work areas and platforms, and in small areas and heights. Strong verbal and written communication skills. Commitment to integrity and quality. Ability to navigate documents, drawings, and software using an electronic tablet a plus. Positive attitude and self-motivated. Able to pass a pre-employment drug screen, physical and background check. What you can expect Exceptional health, dental and vision insurance. Paid Employee Only Medical Coverage In house and training growth opportunities, leadership development Comprehensive benefit package and employer sponsored memberships. 401k match, PTO, Holiday Pay, and more! Working Conditions While performing the duties of this job, the employee is regularly required to stand, walk, squat, bend, and lift for extended periods of time; talk or hear; perform fine motor, hand, and finger skills in the use working with tools. Wear protective equipment (PPE) and work clothing and boots. This job will require physical exertion, such as climbing, lifting, and carrying heavy objects, reach with arms and/or hands. This position is performed in a non-climate-controlled temperature environment, working offsite at various construction sites, and building locations. Position expectations to work full 40-hour work weeks and maintain a flexible work schedule to achieve project objectives. EEO Statement Comfort Systems USA, Inc., together with its subsidiaries provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, pregnancy or maternity, national origin, citizenship, genetic information, disability, protected veteran, gender identity, age or any other status protected by law. This policy applies to recruiting, hiring, transfers, promotions, terminations, compensation, benefits, and all other terms and conditions of employment. Comfort Systems USA, Inc., together with its subsidiaries will not tolerate any unlawful discrimination toward, or harassment of, applicants or employees by anyone at Comfort Systems USA, Inc, or anyone working on behalf of Comfort Systems USA, Inc.
$39k-53k yearly est. Auto-Apply 60d+ ago
MECHANIC I (Heavy Equipment)
The Branch Group Inc. 4.1
Wilkesboro, NC jobs
Branch is searching for an entry-level and safety-oriented Mechanic to join our well-established, growing company. The Mechanic I is responsible for assisting with the inspection, maintenance, and repair of heavy construction equipment such as bulldozers, excavators, loaders, backhoes, graders, and haul trucks. This role works under close supervision of senior mechanics and supervisors to develop technical skills and ensure the safe and efficient operation of company-owned equipment. Duties/Responsibilities * Perform routine preventative maintenance (lubrication, oil changes, filter replacements, inspections). * Assist in diagnosing mechanical, electrical, and hydraulic issues. * Complete minor repairs and adjustments under supervision. * Maintain service records and accurately document work performed. * Inspect equipment for safety hazards and report deficiencies. * Use hand tools, power tools, diagnostic equipment, and service manuals as directed. * Keep work area, tools, and shop organized and clean. * Follow company safety policies, OSHA regulations, and environmental guidelines. * Assist senior mechanics with major component repairs (engines, transmissions, hydraulics). * Ability to work independently on routine tasks and as part of a team. Duties/Responsibilities Cont. Qualifications * High school diploma or GED. * Basic training in automotive/heavy equipment repair (trade school, apprenticeship, or equivalent preferred). * 0-2 years of relevant experience. * Valid driver's license (CDL preferred or ability to obtain). * Ability to lift up to 75 lbs. and work in outdoor environments under varying weather conditions. Competencies Productivity Delivering High Quality Work Dependability Following Policies and Procedures Working Safely Travel Supervisory Responsibility Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to use hands and fingers to handle, feel or operate objects, tools or controls, and reach with hands and arms. The employee is frequently required to stand, talk and hear. The employee is occasionally required to walk, sit, climb, balance, stoop, kneel, crouch, crawl, taste and smell. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Position Type/Expected Hours of Work This is a full-time position which will typically involve 40+ hours a week. Due to the nature of the job, the employee must be available on-call early/late hours to deal with delays, bad weather and emergencies at the job site. AAP/EEO Statement It has been and will continue to be a fundamental policy of the Company not to discriminate on the basis of race, color, religion, sex, national origin, age, disability, sexual orientation, gender identity, or status as a veteran, or any other basis protected by applicable federal, state or local law, with respect to recruitment, hiring, training, promotion, and other terms and condition of employment. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Nearest Major Market: Hickory Apply now " Find similar jobs: * Careers Home * View All Jobs * Benefits * Life at Branch * branchgroup.com * * * Copyright 2025
$42k-54k yearly est. 11d ago
MECHANIC I
The Branch Group Inc. 4.1
Wilkesboro, NC jobs
Branch is searching for an entry-level and safety-oriented Mechanic to join our well-established, growing company. The Mechanic I is responsible for assisting with the inspection, maintenance, and repair of heavy construction equipment such as bulldozers, excavators, loaders, backhoes, graders, and haul trucks. This role works under close supervision of senior mechanics and supervisors to develop technical skills and ensure the safe and efficient operation of company-owned equipment. Duties/Responsibilities * Perform routine preventative maintenance (lubrication, oil changes, filter replacements, inspections). * Assist in diagnosing mechanical, electrical, and hydraulic issues. * Complete minor repairs and adjustments under supervision. * Maintain service records and accurately document work performed. * Inspect equipment for safety hazards and report deficiencies. * Use hand tools, power tools, diagnostic equipment, and service manuals as directed. * Keep work area, tools, and shop organized and clean. * Follow company safety policies, OSHA regulations, and environmental guidelines. * Assist senior mechanics with major component repairs (engines, transmissions, hydraulics). * Ability to work independently on routine tasks and as part of a team. Duties/Responsibilities Cont. Qualifications * High school diploma or GED. * Basic training in automotive/heavy equipment repair (trade school, apprenticeship, or equivalent preferred). * 0-2 years of relevant experience. * Valid driver's license (CDL preferred or ability to obtain). * Ability to lift up to 75 lbs. and work in outdoor environments under varying weather conditions. Competencies Productivity Delivering High Quality Work Dependability Following Policies and Procedures Working Safely Travel Supervisory Responsibility Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to use hands and fingers to handle, feel or operate objects, tools or controls, and reach with hands and arms. The employee is frequently required to stand, talk and hear. The employee is occasionally required to walk, sit, climb, balance, stoop, kneel, crouch, crawl, taste and smell. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Position Type/Expected Hours of Work This is a full-time position which will typically involve 40+ hours a week. Due to the nature of the job, the employee must be available on-call early/late hours to deal with delays, bad weather and emergencies at the job site. AAP/EEO Statement It has been and will continue to be a fundamental policy of the Company not to discriminate on the basis of race, color, religion, sex, national origin, age, disability, sexual orientation, gender identity, or status as a veteran, or any other basis protected by applicable federal, state or local law, with respect to recruitment, hiring, training, promotion, and other terms and condition of employment. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or disability. Nearest Major Market: Hickory Apply now " Find similar jobs: * Careers Home * View All Jobs * Benefits * Life at Branch * branchgroup.com * * * Copyright 2025
$42k-54k yearly est. 21d ago
MECHANIC II
The Branch Group Inc. 4.1
Wilkesboro, NC jobs
Branch is searching for an experienced and safety-oriented Mechanic to join our well-established, growing company. The Heavy Equipment Mechanic II is a skilled journey-level position responsible for performing preventive maintenance, diagnostics, and repairs on a variety of heavy construction equipment. This role requires troubleshooting skills, the ability to work independently with minimal supervision, and the capability to train and mentor entry-level mechanics. Duties/Responsibilities * Perform scheduled preventive maintenance services, adjustments, and equipment overhauls. * Utilize diagnostic tools, service manuals, and electronic equipment to identify and resolve mechanical issues. * Inspect, diagnose, and repair diesel and gasoline engines, hydraulic systems, transmissions, electrical systems, and undercarriages on heavy construction equipment. * Repair and service equipment such as bulldozers, excavators, graders, loaders, backhoes, cranes, and other specialized machinery. * Weld, fabricate, and modify equipment parts as needed to maintain operational standards. * Maintain accurate service records, work orders, and parts usage in compliance with company procedures. * Adhere to safety protocols, PPE standards, and environmental regulations while performing work. * Provide guidance and mentorship to Heavy Equipment Mechanic I positions and apprentices. * Assist in road calls and field repairs to minimize equipment downtime. * May perform other related duties as assigned. Duties/Responsibilities Cont. Qualifications * High school diploma or equivalent; completion of a vocational or technical program in heavy equipment repair preferred. * Minimum of 3-5 years of experience as a heavy equipment mechanic, including at least 2 years in construction equipment repair. * Valid driver's license (CDL preferred or ability to obtain). * Manufacturer or industry certifications (e.g., Caterpillar, John Deere, ASE Medium/Heavy Truck) highly desirable. * Ability to lift up to 75 lbs. and work in outdoor environments under varying weather conditions. Competencies Dependability Following Policies and Procedures Working Safely Productivity Delivering High Quality Work Travel Supervisory Responsibility Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to use hands and fingers to handle, feel or operate objects, tools or controls, and reach with hands and arms. The employee is frequently required to stand, talk and hear. The employee is occasionally required to walk, sit, climb, balance, stoop, kneel, crouch, crawl, taste and smell. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus Position Type/Expected Hours of Work This is a full-time position which will typically involve 40+ hours a week. Due to the nature of the job, the employee must be available on-call early/late hours to deal with delays, bad weather and emergencies at the job site. AAP/EEO Statement It has been and will continue to be a fundamental policy of the Company not to discriminate on the basis of race, color, religion, sex, national origin, age, disability, sexual orientation, gender identity, or status as a veteran, or any other basis protected by applicable federal, state or local law, with respect to recruitment, hiring, training, promotion, and other terms and condition of employment. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or disability. Nearest Major Market: Hickory Apply now " Find similar jobs: * Careers Home * View All Jobs * Benefits * Life at Branch * branchgroup.com * * * Copyright 2025
$42k-54k yearly est. 21d ago
MECHANIC II (Heavy Equipment)
The Branch Group Inc. 4.1
Wilkesboro, NC jobs
Branch is searching for an experienced and safety-oriented Mechanic to join our well-established, growing company. The Heavy Equipment Mechanic II is a skilled journey-level position responsible for performing preventive maintenance, diagnostics, and repairs on a variety of heavy construction equipment. This role requires troubleshooting skills, the ability to work independently with minimal supervision, and the capability to train and mentor entry-level mechanics. Duties/Responsibilities * Perform scheduled preventive maintenance services, adjustments, and equipment overhauls. * Utilize diagnostic tools, service manuals, and electronic equipment to identify and resolve mechanical issues. * Inspect, diagnose, and repair diesel and gasoline engines, hydraulic systems, transmissions, electrical systems, and undercarriages on heavy construction equipment. * Repair and service equipment such as bulldozers, excavators, graders, loaders, backhoes, cranes, and other specialized machinery. * Weld, fabricate, and modify equipment parts as needed to maintain operational standards. * Maintain accurate service records, work orders, and parts usage in compliance with company procedures. * Adhere to safety protocols, PPE standards, and environmental regulations while performing work. * Provide guidance and mentorship to Heavy Equipment Mechanic I positions and apprentices. * Assist in road calls and field repairs to minimize equipment downtime. * May perform other related duties as assigned. Duties/Responsibilities Cont. Qualifications * High school diploma or equivalent; completion of a vocational or technical program in heavy equipment repair preferred. * Minimum of 3-5 years of experience as a heavy equipment mechanic, including at least 2 years in construction equipment repair. * Valid driver's license (CDL preferred or ability to obtain). * Manufacturer or industry certifications (e.g., Caterpillar, John Deere, ASE Medium/Heavy Truck) highly desirable. * Ability to lift up to 75 lbs. and work in outdoor environments under varying weather conditions. Competencies Dependability Following Policies and Procedures Working Safely Productivity Delivering High Quality Work Travel Supervisory Responsibility Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to use hands and fingers to handle, feel or operate objects, tools or controls, and reach with hands and arms. The employee is frequently required to stand, talk and hear. The employee is occasionally required to walk, sit, climb, balance, stoop, kneel, crouch, crawl, taste and smell. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus Position Type/Expected Hours of Work This is a full-time position which will typically involve 40+ hours a week. Due to the nature of the job, the employee must be available on-call early/late hours to deal with delays, bad weather and emergencies at the job site. AAP/EEO Statement It has been and will continue to be a fundamental policy of the Company not to discriminate on the basis of race, color, religion, sex, national origin, age, disability, sexual orientation, gender identity, or status as a veteran, or any other basis protected by applicable federal, state or local law, with respect to recruitment, hiring, training, promotion, and other terms and condition of employment. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Nearest Major Market: Hickory Apply now " Find similar jobs: * Careers Home * View All Jobs * Benefits * Life at Branch * branchgroup.com * * * Copyright 2025
$42k-54k yearly est. 11d ago
Experienced Mechanic ( Gas & Diesel )
Anderson Columbia Co 4.4
Weslaco, TX jobs
Anderson Columbia Co. Inc. is accepting resumes for an Experienced Mechanic. Since 1958, Anderson Columbia has been an industry leader in paving and road building, making smooth stomping grounds for vehicles of all kinds. We strive to construct roads from the highest quality materials and apply ourselves to ensure the job is done right. From small backstreets to congested highways, we perform jobs of all proportions and create pavement in a way that makes the ride enjoyable. Our sense of professionalism paired with our teams of highly-trained personnel allows us to be successful at every job we employ. Anderson Columbia doesn't just hire employees into a company, we hire people into our family; after all, people are our greatest asset. If you appreciate the feeling of sweat on your forehead, the sense of accomplishment at the end of a long day, or the pride in calloused hands, Anderson Columbia may have a place for you. Pay Rate - Starting at $14 - $20 / Hour DOE* Requirements - 5 years of experience with both gas and diesel engine repair. Must have basic set of general tools Must pass Pre-Employment Drug Screen and Physical. Must have valid driver's license. Must have reliable transportation. Must be willing to work 10-12 hour shifts Monday - Friday, with the occasional Saturday. Experience utilizing machines/equipment as follows: hand tools, drills, grinders, saws, multimeter, tachometer, welder, cutting torch, hydraulic gear puller, electric forklifts, pallet jacks, and platform lifts. *Special Consideration for applicants who posses CDL Licenses. Responsibilities - Perform scheduled preventative maintenance on mechanical material handling equipment. Perform emergency mechanical repairs to failed material handling systems. Identify and locate required repair parts for failed systems. Maintain accurate record keeping such as: work orders, time sheets, and parts requests Benefit Packages available after 3 months. Healthcare, Dental, Eye, Life Insurance, paid holidays. 401 k after 6 months, with company match program. DFW / EOE Disclaimer The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.
$14-20 hourly 60d+ ago
Road Mechanic-LaGrange, NC
River City Construction Inc. 3.8
La Grange, NC jobs
Job Description Road Mechanic position is responsible for maintenance and repairs of on and offroad equipment and out on crew jobsites daily with occasional travel to the shop or office. Responsibilities Inspect and repair company equipment such as pickups, line trucks, trailers, excavators, compressors, boring rigs, off road tracked vehicles, etc. in a safe, timely, and cost-effective manner Preform Road tests and operational checks of vehicles and equipment to ensure quality repairs and services Place orders for required parts materials and supplies as needed Prepare and maintain records and reports as required Maintain tools, supplies, workstations in a clean, safe, and presentable manner Provide support for fellow mechanics on a as needed basis Complete DOT inspections Ability to complete Tune-ups, Brake jobs (hydraulic and Air) Basic Wiring Ability to Safely use Cutting Torch and Basic Welding Skills Ability to work alone and unsupervised Perform other duties as requested or assigned by Lead, Maintenance Coordinator, and Fleet Manager Physical Aspects: The physical demands described here are typical of those that must be met by a team-member to successfully perform the essential functions of their job in powerline construction. While performing the duties of this job, team-members are regularly required to talk or listen. The team-member is frequently required to stand; walk; use hands to finger, handle, and feel; and reach with hands and arms. The team-member is frequently required to perform rigorous physical labor; sit; climb different types of structures (wood, steel, etc.); or balance; and stoop, kneel crouch or crawl. Team-members frequently lift or move up to or in-excess of 50 lbs. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment: While performing the duties of this job, team-members may frequently be exposed to fumes or airborne particles, moving mechanical parts and vibration. Team-members are occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment can be loud. Powerline construction work is performed outside and is subject to diverse weather conditions. Competencies: Team-Oriented Self-Motivated Customer Service Focused Ethical and Honest Dutifully follows established Safety Rules and Company Policy Required Qualifications MUST HAVE OWN TOOLS Valid Driver's License and acceptable driving record Minimum of 3 years' experience in vehicle maintenance, diagnostics, and repairs or closely related field Basic Diesel and drivetrain experience Basic hydraulic knowledge Knowledge of Heavy equipment repairs Proficient in reading and understanding scan tool Knowledge of safety Procedures and Guidelines Knowledge of Heavy equipment repairs Flexible work schedule: 7:00 am -5:00 pm M-F, occasional late nights, early mornings, and weekends Preferred Qualifications 5 or more years' experience in vehicle maintenance, diagnostics, and repairs or closely related field CDL Class A License or the ability to obtain one within 90 days of hire Specific training/certifications (ASE, ALTEC, TEREX, ECT) Special Position Requirements This is position and all applicable policies including drug testing and background checks will apply. River City Construction provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, national origin, age, disability or genetics. In addition to federal law requirements, River City complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. Benefits We offer a comprehensive benefits package designed to support the well-being of our employees and their families. Our benefits include medical, dental, and vision coverage, paid time off, company-paid holidays, a 401(k) plan, and numerous voluntary benefits.
$48k-62k yearly est. 5d ago
Mechanic
Centuri Group 3.7
Corpus Christi, TX jobs
Who We Are Centuri Group is comprised of a family of companies that make up a utility infrastructure enterprise, operating throughout the US and Canada, committed to safely delivering gas, electric and utility services to our customers and the community. We help you build your career on Solid Ground by investing in your development and valuing your unique skills, perspective, and background. Employees are the lifeblood of our organization, and we're committed to providing a stable foundation to continuously grow and thrive. We've got work for the next 100 years - All we need is you! At Linetec our Mechanics bring a strong base of mechanical knowledge and experience including with tools, equipment, and vehicles. You should possess a great work ethic, a willingness to learn new machines, and be accustomed to the mechanic's trade. You will encompass a variety of functions that are critical to the success of Linetec. CDL strongly preferred or ability to acquire CDL permit within 60 days of hire. What You'll Do * Perform basic welding tasks * Repair, over haul and replace major truck and automobile components * Communicate with fellow team members regarding broken equipment, repairs that need to be made, timelines and costs * Service equipment when returned from a job site * Make major and minor repairs to equipment * Maintain log books of repairs * Complete required company training, including safety training * Perform Administrative and Lineman duties as required * Perform other responsibilities as requested by leadership What You'll Have * High school diploma or GED required * Must meet the requirements for Mechanic level I * Skilled in Mechanical operations including welding, vehicle and small equipment repair * CDL strongly preferred or ability to acquire CDL permit within 60 days of hire * Ability to follow through on tasks * Possess a customer service attitude * Excellent multitasking, problem solving and critical thinking skills * Ability to maintain flexibility in a fast-paced environment * Willing to learn our standard processes and procedures * Desire to learn and commitment to doing quality work while putting safety first * Will be required at times to travel to job sites to make repairs What You'll Get * Benefit Package including Medical, Dental and Vision Coverage * 401K w/ Company Match * Voluntary Life & AD&D Insurance and Short-Term and Long-Term Disability * Vacation/Sick Time and Paid Holidays * Potential Bonus Opportunities * Career Development Opportunities * Employee Discounts * Weekly Payroll Work Environment * Work sites are outdoors in potentially extreme weather conditions * All worksite safety instructions are written and spoken in English; must be fluent in English * Work includes prolonged and repeated: lifting (including overhead, up to 50lbs); standing; climbing; kneeling; reaching and feeling; crouching and crawling * Work is performed within the "red zone" of heavy equipment * Working safely requires quick/accurate hand-eye coordination and the ability to work in a constant state of alertness and safe manner Legal Stuff * Pass pre-employment, random, post-accident, and reasonable suspicion drug screens * Provide valid US work authorization documents for E-Verify * Satisfactory results of pre-employment background check results * Valid driver's license with clean driving record is required * Pre-employment medical fit-for-duty test; hold/obtain DOT medical card Diversity, Equity & Inclusion Commitment This job description is subject to change at any time. It reflects management's assignment of essential functions, and does not exclude or restrict the tasks that may be assigned. Centuri and its subsidiary companies will provide equal employment opportunities to all applicants without regard to an applicant's race, color, religion, sex, gender, genetic information, national origin, age, veteran status, disability, or any other status protected by federal, state or local law. Centuri will provide reasonable accommodations to allow an applicant to participate in the hiring process (e.g., accommodations for a test or job interview) if so requested. Centuri is a Department of Transportation regulated employer. Certain safety-sensitive positions are covered under the DOT Drug and Alcohol Testing Regulations, 49 CFR Part 40. It is important to note that marijuana remains a drug listed in Schedule I of the Controlled Substances Act. It remains unacceptable for any safety-sensitive employee subject to drug testing under the company's Drug Free Workplace Policy to use or test positive for marijuana. Nearest Major Market: Corpus Christi
$33k-44k yearly est. 60d+ ago
MECHANIC II (Heavy Equipment)
The Branch Group Inc. 4.1
Burnsville, NC jobs
Branch is searching for an experienced and safety-oriented Mechanic to join our well-established, growing company. The Heavy Equipment Mechanic II is a skilled journey-level position responsible for performing preventive maintenance, diagnostics, and repairs on a variety of heavy construction equipment. This role requires troubleshooting skills, the ability to work independently with minimal supervision, and the capability to train and mentor entry-level mechanics. Duties/Responsibilities * Perform scheduled preventive maintenance services, adjustments, and equipment overhauls. * Utilize diagnostic tools, service manuals, and electronic equipment to identify and resolve mechanical issues. * Inspect, diagnose, and repair diesel and gasoline engines, hydraulic systems, transmissions, electrical systems, and undercarriages on heavy construction equipment. * Repair and service equipment such as bulldozers, excavators, graders, loaders, backhoes, cranes, and other specialized machinery. * Weld, fabricate, and modify equipment parts as needed to maintain operational standards. * Maintain accurate service records, work orders, and parts usage in compliance with company procedures. * Adhere to safety protocols, PPE standards, and environmental regulations while performing work. * Provide guidance and mentorship to Heavy Equipment Mechanic I positions and apprentices. * Assist in road calls and field repairs to minimize equipment downtime. * May perform other related duties as assigned. Duties/Responsibilities Cont. Qualifications * High school diploma or equivalent; completion of a vocational or technical program in heavy equipment repair preferred. * Minimum of 3-5 years of experience as a heavy equipment mechanic, including at least 2 years in construction equipment repair. * Valid driver's license (CDL preferred or ability to obtain). * Manufacturer or industry certifications (e.g., Caterpillar, John Deere, ASE Medium/Heavy Truck) highly desirable. * Ability to lift up to 75 lbs. and work in outdoor environments under varying weather conditions. Competencies Dependability Following Policies and Procedures Working Safely Productivity Delivering High Quality Work Travel Supervisory Responsibility Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to use hands and fingers to handle, feel or operate objects, tools or controls, and reach with hands and arms. The employee is frequently required to stand, talk and hear. The employee is occasionally required to walk, sit, climb, balance, stoop, kneel, crouch, crawl, taste and smell. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus Position Type/Expected Hours of Work This is a full-time position which will typically involve 40+ hours a week. Due to the nature of the job, the employee must be available on-call early/late hours to deal with delays, bad weather and emergencies at the job site. AAP/EEO Statement It has been and will continue to be a fundamental policy of the Company not to discriminate on the basis of race, color, religion, sex, national origin, age, disability, sexual orientation, gender identity, or status as a veteran, or any other basis protected by applicable federal, state or local law, with respect to recruitment, hiring, training, promotion, and other terms and condition of employment. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Nearest Major Market: Asheville Apply now " Find similar jobs: * Careers Home * View All Jobs * Benefits * Life at Branch * branchgroup.com * * * Copyright 2025
$41k-53k yearly est. 35d ago