Explore jobs
Find specific jobs
Explore careers
Explore professions
Best companies
Explore companies
Best supplier quality engineer certifications
The best certifications for a supplier quality engineer are Certified Quality Engineer (CQE), Six Sigma Green Belt, and Certified Quality Auditor (CQA).
Supplier quality engineer certifications demonstrate your competency as a supplier quality engineer to employers. However, not all supplier quality engineer certifications provide the same value.
Below is a list of the best supplier quality engineer certifications. Obtaining a supplier quality engineer certification will give you a leg up when you apply for jobs and increase your potential salary.
18 best certifications for supplier quality engineers
| Rank | Supplier quality engineer certification | Organization |
|---|---|---|
| 1 | Certified Quality Engineer (CQE) | ASQ |
| 2 | Six Sigma Green Belt | IASSC |
| 3 | Certified Quality Auditor (CQA) | ASQ |
| 4 | Lead Auditor | Earth Tech |
| 5 | Master Quality Manager (MQM) | AAPM |
| 6 | Certified Manager of Quality/Organizational Excellence (CMQ/OE) | ASQ |
| 7 | Six Sigma Black Belt | IASSC |
| 8 | Engineer In Training Certification (EIT) | NCEES |
| 9 | Certified Quality Technician (CQT) | ASQ |
| 10 | Certified Welding Inspector (CWI) | AWS |
| 11 | Certified Manufacturing Engineer (CMfgE) | SME |
| 12 | Certified Aviation Manager (CAM) | NBAA |
| 13 | Certified Reliability Engineer (CRE) | ASQ |
| 14 | Master Certified Electronics Technician (CETma) | ETA |
| 15 | Certified Six Sigma Greenbelt (CSSGB) | ASQ |
| 16 | Certified Quality Assurance Professional (CQAP) | MBA |
| 17 | Certified Quality Management System Lead Auditor | SAI Global - ... |
| 18 | Certified Supply Chain Professional (CSCP) | ASTL |
18 best supplier quality engineer certifications
1. Certified Quality Engineer (CQE)
The Certified Quality Engineer is a professional who understands the principles of product and service quality evaluation and control. This body of knowledge and applied technologies include, but are not limited to, development and operation of quality control systems, application and analysis of testing and inspection procedures, the ability to use metrology and statistical methods to diagnose and correct improper quality control practices, an understanding of human factors and motivation, facility with quality cost concepts and techniques, and the knowledge and ability to develop and administer management information systems and to audit quality systems for deficiency identification and correction.
- More than two years of education or training after high school required? No
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 3 year(s)
2. Six Sigma Green Belt
The IASSC Certified Lean Six Sigma Green Belt (ICGB) is a professional who is well versed in the Lean Six Sigma Methodology who both leads or supports improvement projects, typically as a part-time role. A Lean Six Sigma Green Belt possesses a thorough understanding of all aspects within the phases of D-M-A-I-C. They understand how to perform and interpret Six Sigma tools and how to use standard principles of Lean.
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required?
3. Certified Quality Auditor (CQA)
The Certified Quality Auditor is a professional who understands the standards and principles of auditing and the auditing techniques of examining, questioning, evaluating and reporting to determine a quality system's adequacy and deficiencies. The Certified Quality Auditor analyzes all elements of a quality system and judges its degree of adherence to the criteria of industrial management and quality evaluation and control systems.
- More than two years of education or training after high school required? No
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 3 year(s)
4. Lead Auditor
Designed to provide auditors with the environmental knowlege they will need to assess significant environmental aspects, operational controls and overall environmental performance.
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? No
- Oral or written exam required? Yes
- Renewal required? No
5. Master Quality Manager (MQM)
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 2 year(s)
6. Certified Manager of Quality/Organizational Excellence (CMQ/OE)
The Certified Manager of Quality/Organizational Excellence is a professional who leads and champions process-improvement initiatives' everywhere from small businesses to multinational corporations' that can have regional or global focus in a variety of service and industrial settings. A Certified Manager of Quality/Organizational Excellence facilitates and leads team efforts to establish and monitor customer/supplier relations, supports strategic planning and deployment initiatives, and helps develop measurement systems to determine organizational improvement. The Certified Manager of Quality/Organizational Excellence should be able to motivate and evaluate staff, manage projects and human resources, analyze financial situations, determine and evaluate risk and employ knowledge management tools and techniques in resolving organizational challenges.
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 3 year(s)
7. Six Sigma Black Belt
The IASSC Certified Lean Six Sigma Black Belt (ICBB) is a professional who is well versed in the Lean Six Sigma Methodology, who leads improvement projects, typically in a full-time role. A Lean Six Sigma Black Belt possesses a thorough understanding of all aspects within the phases of D-M-A-I-C. They understand how to perform and interpret Six Sigma tools and how to use standard principles of Lean.
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required?
8. Engineer In Training Certification (EIT)
The EIT Certification, which is formally known as the Engineer In Training Certification, is simply a document, a number, granted by the individual’s state engineering board after they pass the Engineer In Training Exam. The Engineer in Training Exam (EIT Exam) is the first of two exams you will take as you move towards obtaining your Professional Engineering License (PE). This exam, which you may also hear referred to as the Fundamentals of Engineering exam (FE Exam), is developed and administered in all states (and a number of locations outside the US) by the National Council of Examiners for Engineering and Surveying (NCEES). The FE Exam is offered to eligible students year-round in four different testing windows.
- More than two years of education or training after high school required? No
- More than two years of work experience required? No
- Oral or written exam required? No
- Renewal required? No
9. Certified Quality Technician (CQT)
The Certified Quality Technician is a paraprofessional who, in support of and under the direction of quality engineers or supervisors, analyzes and solves quality problems, prepares inspection plans and instructions, selects sampling plan applications, prepares procedures, trains inspectors, performs audits, analyzes quality costs and other quality data, and applies fundamental statistical methods for process control.
- More than two years of education or training after high school required? No
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required?
10. Certified Welding Inspector (CWI)
The Certified Welding Inspector certification is widely recognized, both nationally and internationally. Successful companies have come to rely on this AWS certification when ensuring the highest level of quality workmanship.
- More than two years of education or training after high school required? No
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 3 year(s)
11. Certified Manufacturing Engineer (CMfgE)
Professionals who earn a CMfgE demonstrate a comprehensive knowledge of manufacturing processes and practices. Pursuing a CMfgE certification requires a minimum of 8 years of combined manufacturing-related education and/or work experience, including a minimum of 4 years of work experience. A CMfgT with a minimum of 7 years manufacturing-related work experience and/or education also qualifies.
- More than two years of education or training after high school required? No
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 3 year(s)
12. Certified Aviation Manager (CAM)
NBAA's Certified Aviation Manager (CAM) Program identifies qualified professionals to lead flight departments and companies that use business aircraft. Join the ranks of esteemed aviation professionals who have already been recognized as Certified Aviation Managers and apply for the CAM Exam today.
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 3 year(s)
13. Certified Reliability Engineer (CRE)
The Certified Reliability Engineer is a professional who understands the principles of performance evaluation and prediction to improve product/systems safety, reliability and maintainability. This body of knowledge (BOK) and applied technologies include, but are not limited to, design review and control; prediction, estimation, and apportionment methodology; failure mode effects and analysis; the planning, operation and analysis of reliability testing and field failures, including mathematical modeling; understanding human factors in reliability; and the ability to develop and administer reliability information systems for failure analysis, design and performance improvement and reliability program management over the entire product life cycle.
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 3 year(s)
14. Master Certified Electronics Technician (CETma)
A technician with six or more years combined work and electronics training may be eligible for the ETA Master Certified Electronics Technician (CETma) certification. The Master certification was created to showcase those technicians who are able to demonstrate proficiency in the many fields of electronics. In addition to the Associate level certification, one must successfully obtain six other certifications, with no more than two originating from the same specialized category, in order to qualify.
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 1 year(s)
15. Certified Six Sigma Greenbelt (CSSGB)
The Six Sigma Green Belt operates in support of or under the supervision of a Six Sigma Black Belt, analyzes and solves quality problems and is involved in quality improvement projects. A Green Belt is someone with at least three years of work experience who wants to demonstrate his or her knowledge of Six Sigma tools and processes.
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? Yes
- Oral or written exam required? Yes
- Renewal required? Every 3 year(s)
16. Certified Quality Assurance Professional (CQAP)
The Certified Quality Assurance Professional (CQAP) designation gives you the training you need to be a leader in quality assurance. With specialized high level knowledge, you move forward with the confidence and experience required to develop quality control processes that are finely tuned to work efficiently within your company's current environment. Plus, as a CQAP you join a new network of the highest level of quality assurance experts - a group that your peers regard with supreme professional respect. The CQAP program builds upon your experience and knowledge. The first two levels - the achievement certificate and professional certificate - lay a foundation for the final level, the specialist designation program.
- More than two years of education or training after high school required? No
- More than two years of work experience required? No
- Oral or written exam required? Yes
- Renewal required? No
17. Certified Quality Management System Lead Auditor
This newly certified course is the first in the United States to offer a completely new approach to quality management systems lead auditor training. The training is focused on attendee attainment of three sets of defined competencies: auditing skills, quality management systems, and team leader skills.
- More than two years of education or training after high school required? Yes
- More than two years of work experience required? No
- Oral or written exam required? Yes
- Renewal required? No
18. Certified Supply Chain Professional (CSCP)
Due to an overwhelming request for an entry level industry certification, the American Society of Transportation and Logistics (AST&L) now offers the Professional Designation in Logistics and Supply Chain Management (PLS) to professionals seeking an understanding of the key strategies for improving customer service and increasing the efficiency of their logistics and supply chain operations. The purpose of the PLS is to recognize individuals that have completed a course of study examining the strategies for improving logistics and supply chain operations and are seeking to apply this knowledge within their profession. This designation is granted to AST&L members who have successfully passed the comprehensive examination.
- More than two years of education or training after high school required? No
- More than two years of work experience required? No
- Oral or written exam required? Yes
- Renewal required? Every 5 year(s)
What is the best certification for a supplier quality engineer?
The best supplier quality engineer certification is Certified Quality Engineer (CQE). The Certified Quality Engineer (CQE) is awarded by the American Society for Quality. The advanced certification is for more experienced employees as it often requires some work experience to acquire.
Here's a bit more background on how to obtain this supplier quality engineer certification:
- To become a certified Certified Quality Engineer (CQE), you need to pass the exam.
- This certificate requires more than two years of work experience.
- Renew certification every 3 year.
What are some of the most in-demand certifications for supplier quality engineers?
The most in-demand supplier quality engineer certification is Certified Quality Engineer based on all active job postings. Having this supplier quality engineer certification will give you access to more supplier quality engineer jobs with higher salaries.
What certifications can impact a supplier quality engineer career and salary?
The Certified Quality Engineer certification will help you to secure a quality engineer position, which will increase your pay and career trajectory. A quality engineer's average salary is $74,328 whereas supplier quality engineers make an average salary of $83,182.
The most common combination of supplier quality engineer certifications include: Certified Quality Engineer (CQE), Six Sigma Green Belt, and Certified Quality Auditor (CQA).
Online courses for supplier quality engineers to earn certifications
1. Certified Quality Process Analyst Training
Certified Quality Process Analyst (CQPA) Exam Preparation Course - Confidently Pass the Exam on the First Attempt...
2. ISO 9001:2015 Quality management system auditor
Upgrade your career by learning how to implement and audit a quality management system according to ISO 9001...
3. Certified Quality Engineer Training [2022]
Comprehensive Certified Quality Engineer (CQE) Exam Preparation Course (2022 Body of Knowledge)...
4. The Production Part Approval Process (PPAP)
The 18-step process for ensuring new parts are consistently manufactured and meet their customers' quality expectations...
5. Quality Systems, Models and Theories
Understand, Develop and Implement Quality Systems for Success and Profit...
6. ISO 9001:2015-Quality Management System Implementation & Audit
Learn how to Implement and Audit a Quality Management System as per ISO 9001: 2015...
7. Quality Management Systems:Management and Control of Quality
Learn to Build, Implement, and Sustain a Performance Excellence Culture into Your Organisation...
8. ISO9001 Quality Management System
Learn why your business should be using Quality Management TODAY and create your own QMS (Quality Management System)...
9. Statistical Process Control (SPC) Using Microsoft Excel
A Deep Dive into Analyzing your Process Data to Drive Quality Improvements within your Organization...
10. Data Quality Fundamentals
Understand key concepts, principles and terminology related to Data Quality...
11. 7 Quality Tools for Quality Management and Improvements.
A complete Crash Course on the 7 Basic Tools for Quality Management and its Implementation using MS Excel...
12. Certified Quality Auditor Training
Certified Quality Auditor (CQA) Exam Preparation Course - Confidently pass the exam in the first attempt...
13. Mastering ISO 9001:2015 Quality Management System
Plain and Simple Clause by Clause Explanation of ISO 9001:2015 QMS Standard & Implementation Strategies...
14. Mastering the Seven Quality Tools (with Microsoft Excel)
A Deep Dive into the theory and application of the 7 Quality Tools for root cause analysis and continuous improvement...
15. Quality Management for Business Excellence
Lead Quality Management in the Organization • Transform the Organization to Become the Best-in-Class...
16. Kaizen Practitioner Masterclass for Quality Management.
Structured Approach to identify and Eliminate waste in Business for Continuous Improvement & Quality Management...
17. Cost of Quality Analysis and Reporting using Microsoft Excel
Expertly collect, analyze and present quality cost data (using Microsoft Excel) to help drive continual improvement...
18. ISO 9001:2015 Quality Management Systems Lead Auditor Course
How to Implement & Audit an ISO 9001:2015 Quality Management Systems Lead Auditor/ Auditor course...
19. ISO 9001, Quality Management and Strategic Thinking Training
Combine ISO, Quality & Strategic Thinking with Real Business and boost your Processes...
20. Certified Manager of Quality Training
Certified Manager of Quality and Organizational Excellence (CMQ/OE) Exam Preparation Course...