Systems engineer staff entry level jobs - 10 jobs

Seeking a Staff Engineer to perform landfill construction quality assurance (CQA) and construction technician. This position may require travel and overnight stays including some weekends, depending on job site location. Most work is in Ohio. The Staff Engineer will start in the field, responsible for traveling to various solid waste facilities to perform on-site documentation/recording of daily activities, verifying the work contractors are doing is accurate, as well as soil testing to ensure it meets project specifications. This role can be trained and does not require prior experience. Must be comfortable living out of hotels for extended periods of time (not frequent, but occasionally expected). Will eventually move into more of an office-based role once the field work is mastered. Responsibilities: -Construction monitoring and documentation of construction activities at solid waste landfill facilities including field inspection and testing of soils and geosynthetic liners. On-site job training will be provided as necessary. -Responsible for assuring overall compliance with all applicable project specifications and construction drawings. -Supervise and complete construction quality assurance and construction quality control activities in several states, including the construction of landfill components and other environmental control systems. -Perform field and/or laboratory testing, observation, and inspection of construction materials (e.g., soils, aggregates, concrete, asphalt, and steel). -Communicate with project managers, engineering technicians, client representatives, and contractor representatives regarding the construction site, project requirements, and testing, observation, and inspection results. -Transport material samples with associated identifying documentation to the laboratory for further testing and analysis. -Tabulate, prepare, and submit data and observations in written and digital reports for daily transmittal to the Weaver Project Manager. -Maintain and clean equipment, vehicles, and work areas. -Adhere to strict safety standards. -Under close supervision of higher-level technicians or staff professionals, assist on tasks and perform basic testing and observation duties. -Provide clear documentation of findings and results. -Communicate information to the Project Manager and discuss the accuracy of data in preparation for submittal. -Submit documentation and communicate results as directed by the Project Manager. -Progressively assume increased roles of training and responsibility in work assignments. -Follow safety rules, practices, and other safety requirements for all projects. -Perform pre-task planning prior to executing work. -Report any safety issues or concerns to management. -Maintain quality standards on all projects. Skills civil engineering, blueprint, construction drawings, Engineering, materials testing, soil testing, Construction inspection, nuclear density gauge, landfill design, quality assurance inspection Top Skills Details civil engineering,blueprint,construction drawings Additional Skills & Qualifications -Civil Engineering degree is strongly preferred; will consider environmental engineering or construction related degrees -No working experience required; will provide on-the-job training in the field -Ability to read and interpret construction drawings -Ability/ willingness to travel full time and stay in hotels as required -Ability/ willingness to work outdoors in various weather conditions -On-site construction experience preferred -Soil sampling/ testing experience a plus -Ability to travel across Ohio and surrounding states Experience Level Entry Level Job Type & Location This is a Contract to Hire position based out of Dublin, OH. Pay and Benefits The pay range for this position is $25.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Dublin,OH. Application Deadline This position is anticipated to close on Feb 2, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Job Posting End Date 02-04-2026 Please note the job posting will close on the day before the posting end date. Works within the System Performance Analysis group. The System Performance Analysis group conducts advanced system studies to support capital projects, including but not limited to transient stability, voltage stability, electromagnetic coupling, insulation coordination, geomagnetically induced currents, electromagnetic field, and Power Quality using PSS/E, ASPEN OneLiner, PSCAD, and Alstom electrical engineering technologies. Job Description What you'll do: More specifically, responsibilities include the following duties: Conduct system performance analysis and provide solutions to support planning, operations, engineering, regulatory and financial needs of the company. Perform electrical engineering studies related to power system stability, reliability, and compliance. Perform transient and voltage stability studies, insulation coordination studies, electromagnetic field studies, and studies of geomagnetically induced currents and geomagnetic disturbance. Perform power-flow analyses in support of system dynamic stability, system restoration, and geomagnetic disturbance analyses. Develop and maintain power system models. Calculate electromagnetic interference for overhead and underground transmission lines. Technical Expertise: Keeps abreast of new products, developments, technologies, procedures and equipment. Understands and analyzes interrelationships between systems and component equipment. Interprets codes and regulations, and develops standards relevant to the area of assignment. Leadership & Guidance: Provides guidance and exercises judgment and discretion in providing guidance and direction to other Engineers. Leads, facilitates and coordinates work activities of others within the work group, team, department, corporate entity, or those external to the company as required to perform all routine engineering work. Ensures all work activities are performed in accordance with the policies, practices, standards and rules of the company and complies with the regulations and procedures required by external agencies. Promotes engineering professionalism and standards. Coordinates and conducts training sessions. Planning & Organization Ability: Participates in the development of plans by establishing measurable goals, objectives and requirements for specific areas of responsibility. Coordinates the development of input necessary to establish projected cost of all projects. Is proficient in use of scheduling techniques (CPM, PERT, flow charts, etc.) for budget and planning activities. Identifies and initiates appropriate corrective action when objectives are not being met. P roblem Solving & Initiative: Identifies, clarifies, resolves, and initiates solutions to routine and/or complex problems that sometimes involve analysis of inadequate or conflicting data. Demonstrates the ability to divide problems into component steps. Consistently looks for and develops opportunities and presents new ideas and approaches. Communication: Coordinates the work of other engineers in an efficient and effective manner. Develops, reviews or prepares reports on complex technical subjects clearly, concisely and effectively, in a manner suitable for presentation to management, professional societies, regulatory bodies, etc. Leads and facilitates meetings effectively. Interpersonal Skills: Possess collaborative and consensus building skills. Functions as a team leader and member. Networks upward and downward in several disciplines inside and outside the AEP system. Leverages network to get things done. Decision Making: Makes decisions affecting plans and goals based on analysis of uncertain input and outcomes. Uses diverse approaches to make decisions in the absence of a definite framework or where few precedents exist. Can handle conflicting interests related to approaches on projects or studies. Analyzes options and risks and possesses the experience and knowledge to assess the risk of decisions and act accordingly. Makes decisions that affect the operations or results of the department and may have some impact on a major project. Business Awareness & Characteristics: Exhibits an awareness of AEP's competitive position and how business decisions impact their organizational unit. Understands the specific goals and objectives of their individual organizational unit and is proficient in establishing measurable goals and objectives. Effectively manages project budgets using cost management techniques and understands how their decisions and recommendations impact AEP's expenses and revenues. Demonstrates an awareness of profit incentives, optimizing growth of customers' businesses and using our services to attract new business. What we're looking for: Engineer Associate SG6 This is an entry level position for new graduates with a Bachelor's degree in engineering in a program accredited by ABET* Passing the Fundamentals of Engineering examination in preparation for future licensing as a Professional Engineer (PE) is encouraged and preferred. *VP or above may waive the requirement for a degree from a university with an Non ABET accredited program In addition: An Electrical Engineering Bachelor's degree is preferred for this role. Where you'll work: This role sits on site in New Albany Ohio or Columbus Ohio What you'll get: Engineer Associate SG6($84,000-$105,000) In addition to competitive compensation, AEP offers a unique comprehensive benefits package that aims to support and enhance the overall well-being of our employees. Where Putting the Customer First Powers Everything We Do At AEP, we're more than just an energy company - we're a team of dedicated professionals committed to delivering safe, reliable, and innovative energy solutions. Guided by our mission to put the customer first, we strive to exceed expectations by listening, responding, and continuously improving the way we serve our communities. If you're passionate about making a meaningful impact and being part of a forward-thinking organization, this is the company for you! American Electric Power (On-Site) $84K- $105K / Year #LI-Onsite #AEPCareers #engineer #earlycareer Compensation Data Compensation Grade: SP20-005 Compensation Range: $74,551.00 - $93,188.50 The Physical Demand Level for this job is: S - Sedentary Work: Exerting up to 10 pounds of force occasionally (Occasionally: activity or condition exists up to 1/3 of the time) and/or a negligible amount of force frequently. (Frequently: activity or condition exists from 1/3 to 2/3 of the time) to lift, carry, push, pull or otherwise move objects, including the human body. Sedentary work involves sitting most of the time but may involve walking or standing for brief periods of time. Jobs are sedentary if walking and standing are required only occasionally, and all other sedentary criteria are met. Hear about it first! Get job alerts by email. Log in to your Candidate Home Account today! If you don't have an account, you can create one. It is hereby reaffirmed that it is the policy of American Electric Power (AEP) to provide Equal Employment Opportunity in all respects of the employer-employee relationship including recruiting, hiring, upgrading and promotion, conditions and privileges of employment, company sponsored training programs, educational assistance, social and recreational programs, compensation, benefits, transfers, discipline, layoffs and termination of employment to all employees and applicants without discrimination because of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, veteran or military status, disability, genetic information, or any other basis prohibited by applicable law. When required by law, we might record certain information or applicants for employment may be invited to voluntarily disclose protected characteristics.

Job Category: Mobile (hydraulic/mechanical/electronic controls) System Engineer Employment Type: In person, full time, salaried experienced Professional Hours of work (per week): 40 + Travel Introduction This position is within Kraft Fluid System, Inc. Systems engineering Group, which is responsible for dealing with mobile hydraulic and electrical systems at the component level up to system design and sub-system interaction. Key Accountabilities/Responsibilities Working with a team of Applications Engineers to support customers, internal customer service, internal technicians and field sales Responsibility for providing detailed technical responses to customer inquiries pertaining to hydraulic or electrical control components or systems. Typically by email or telephone, but also through face to face meetings. Working closely with other members of the Application Engineering team to share and spread product knowledge. Regular communication with field sales team members, to develop customer specific hydraulic and or electrical system solutions. Hydraulic system development and component selection Hydraulic and electrical schematic development in AutoCAD Mechanical design ( shafts, adapters, etc. ) Electrical control system design and software application development ( Utilizing a windows based graphical symbols platform ) Domestic travel to customers location for system troubleshooting and or system commissioning and Vendor training Desired Education & Qualifications B.S. in Mechanical Engineering, Mechanical Technology or closely related field, or highly experienced candidates may apply. Desirable Skills & Experience Hands-on technical aptitude Hydraulic symbols and mobile circuit design ( Open and closed circuit systems ) DC electrical symbols and control methods Microsoft Office ( Excel, Word, Power Point, Outlook ) 2D/3D AutoCAD / Inventor or similar Multitasking ( must handle many jobs simultaneously ) Low voltage DC wiring methods and skills Coding or programming skills System FMEA analysis Mechanical FEA analysis

Job Title: Systems Engineer Company: Virtual Technologies Group (VTG) Reports To: Help Desk Manager Department: Help Desk Operations Travel: N/A Hybrid Position Type: Full-Time Employee Type: FTE Compensation Range: $50,000 - $60,000 Annually Position Summary Virtual Technologies Group (VTG) is seeking a highly skilled and motivated Systems Engineer to join our growing Managed Services team. This role is ideal for candidates who have demonstrated consistent career progression, deep technical curiosity, and a passion for building and supporting modern IT environments. As a Systems Engineer at VTG, you will manage infrastructure solutions across a wide range of client environments. You'll work with Windows Server, virtualization platforms, networking technologies, and cloud-integrated systems while helping clients modernize and secure their IT operations. Candidates who maintain home lab environments, experiment with new technologies, and continuously push their technical boundaries will excel in this position. Minimum Qualifications 3-5+ years of hands-on IT experience in systems administration, infrastructure engineering, or MSP support roles. Demonstrated career progression or long-term growth within a single organization Experience deploying, configuring, and managing Windows Server environments. Experience with Group Policy (GPO) creation, management, and troubleshooting. Solid understanding of networking fundamentals, including VLANs, routing, switching, firewalls, and VPN technologies. Familiarity with Linux administration. Ability to document environments, follow change management processes, and communicate clearly with clients and colleagues. Strong problem-solving skills and the ability to work independently in fast-paced MSP environments. Hypervisor deployment and management. Preferred Qualifications Industry certifications such as: CCNA CompTIA Network+ LPIC Windows Server Hybrid Administrator Associate (AZ‑800) MCSE (legacy but valued) Experience with VoIP systems (SIP, hosted PBX, QoS Troubleshooting) Exposure to automation or scripting (PowerShell, Bash, Python) Hands-on experience with cloud or hybrid environments (Azure AD, M365, identity management) Familiarity with backup and disaster recovery solutions (Veeam, Datto, etc.) Demonstrated use of home lab environments for learning, testing, or deploying: Windows Server Virtualization stacks Networking labs Automation workflows MSP experience supporting multiple clients and diverse environments Strong customer service mindset and the ability to translate technical concepts into user-friendly language EEO Statement: VTG is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other legally protected status. We believe that diversity strengthens our team and drives innovation. All employment decisions are based on qualifications, merit, and business needs. If you require reasonable accommodation during the application or interview process, please contact [email protected].

Seeking a Staff Engineer to perform landfill construction quality assurance (CQA) and construction technician. This position may require travel and overnight stays including some weekends, depending on job site location. Most work is in Ohio. The Staff Engineer will start in the field, responsible for traveling to various solid waste facilities to perform on-site documentation/recording of daily activities, verifying the work contractors are doing is accurate, as well as soil testing to ensure it meets project specifications. This role can be trained and does not require prior experience. Must be comfortable living out of hotels for extended periods of time (not frequent, but occasionally expected). Will eventually move into more of an office-based role once the field work is mastered. Responsibilities: * Construction monitoring and documentation of construction activities at solid waste landfill facilities including field inspection and testing of soils and geosynthetic liners. On-site job training will be provided as necessary. * Responsible for assuring overall compliance with all applicable project specifications and construction drawings. * Supervise and complete construction quality assurance and construction quality control activities in several states, including the construction of landfill components and other environmental control systems. * Perform field and/or laboratory testing, observation, and inspection of construction materials (e.g., soils, aggregates, concrete, asphalt, and steel). * Communicate with project managers, engineering technicians, client representatives, and contractor representatives regarding the construction site, project requirements, and testing, observation, and inspection results. * Transport material samples with associated identifying documentation to the laboratory for further testing and analysis. * Tabulate, prepare, and submit data and observations in written and digital reports for daily transmittal to the Weaver Project Manager. * Maintain and clean equipment, vehicles, and work areas. * Adhere to strict safety standards. * Under close supervision of higher-level technicians or staff professionals, assist on tasks and perform basic testing and observation duties. * Provide clear documentation of findings and results. * Communicate information to the Project Manager and discuss the accuracy of data in preparation for submittal. * Submit documentation and communicate results as directed by the Project Manager. * Progressively assume increased roles of training and responsibility in work assignments. * Follow safety rules, practices, and other safety requirements for all projects. * Perform pre-task planning prior to executing work. * Report any safety issues or concerns to management. * Maintain quality standards on all projects. Skills civil engineering, blueprint, construction drawings, Engineering, materials testing, soil testing, Construction inspection, nuclear density gauge, landfill design, quality assurance inspection Top Skills Details civil engineering,blueprint,construction drawings Additional Skills & Qualifications * Civil Engineering degree is strongly preferred; will consider environmental engineering or construction related degrees * No working experience required; will provide on-the-job training in the field * Ability to read and interpret construction drawings * Ability/ willingness to travel full time and stay in hotels as required * Ability/ willingness to work outdoors in various weather conditions * On-site construction experience preferred * Soil sampling/ testing experience a plus * Ability to travel across Ohio and surrounding states Experience Level Entry Level Job Type & Location This is a Contract to Hire position based out of Dublin, OH. Pay and Benefits The pay range for this position is $25.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Dublin,OH. Application Deadline This position is anticipated to close on Feb 2, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Software Engineer Full Time - Exempt Columbus, Ohio AndHealth is a healthcare technology company created to help people reverse chronic disease. We are driven by the goal of making world-class specialty care accessible and affordable to all. We partner with health systems, community health centers, plans, and employers to remove barriers to care to ensure all people have access to the care they deserve. We are looking for a Software Engineer to join our team to build a world-class patient experience through the AndHealth mobile, web and desktop applications, while also ensuring the privacy and security of our patients' data. In this role, you'll work across the entire software development lifecycle and work collaboratively with our Product and Care teams to build and deliver an excellent patient experience. Both the company and the product & engineering team are on a path of significant growth, so we're looking for someone who is excited about growing with us-contributing to the company's success while also pursuing personal and professional development. The role may start with gaining comfort with the tech stack (mainly Flutter & GCP) by developing tweaks and bug fixes, and over time grow into more significant feature development. What you'll do in the role: As a member of our product team, you'll partner with our care team to build a world-class mobile experience to help patients manage chronic illness. Create an initial first impression that delights our patients, leading to success is achieving our enrollment goals, while also focusing on building the right windows into the metrics that matter so we can experiment rapidly. Improve both internal and external user experiences in addition to business processes, by integrating with modern services via third-party APIs. Leverage Google Cloud Platform services to architect, build, and deploy scalable and robust backend systems that support new features and functionaly. Collaborate closely with data analysts and engineers to improve reporting and analytics insights, while also optimizing the user experience and automating decision-making processes. Practice continuous integration and deployment to minimize feedback cycles. Decide when to sprint and when to be deliberate in your software engineering practices. Continuously improve our toolset to make future development easier. Education & Licensure Requirements: Bachelor's degree is preferred. Other Skills or Qualifications: “Patient first” attitude: Design tools and experiences that make patients say “wow”. Metric-Driven Approach: Define metrics before building and focus on building features and functionalities aligned with those metrics, allowing for rapid experimentation and iteration. Integration Expertise: Develop and maintain integrations with various systems, databases, and third-party APIs to ensure a cohesive and efficient ecosystem for our patients and care team. Collaborative Teamwork: Work closely with our cross-functional Product team, Care team, and Enrollment team to achieve our shared goals. Passionate about creating: Instead of strict experience requirements, we seek individuals who genuinely love their work, possess a growth mindset, and are fueled by the desire to ensure every patient receives the care they deserve. Here's what we'd like to offer you: Equal investment and support for our people and patients. A fun and ambitious start-up environment with a culture that takes on big things, takes risks, and learns quickly. The ability to demonstrate creativity, innovation, and conscientiousness, and find joy in working together. A team of highly skilled, incredibly kind, and welcoming employees, every one of whom has something unique to offer. We know that the overall success of our business is a collaborative effort, and we strive to provide ongoing opportunities for our employees to learn and grow, both personally and professionally. Full-time employees are eligible to participate in our benefits package which includes Medical, Dental, Vision Insurance, Company, and Paid time off, Short- and Long-Term Disability, and more. We are an equal opportunity and affirmative action employer. We embrace diversity and are committed to creating an inclusive environment for all employees. Applicants will be considered for employment without regard to race, religion, gender, gender identity, sexual orientation, national origin, age, disability, or veteran status.

Job Posting End Date 02-04-2026 Please note the job posting will close on the day before the posting end date. Works within the System Performance Analysis group. The System Performance Analysis group conducts advanced system studies to support capital projects, including but not limited to transient stability, voltage stability, electromagnetic coupling, insulation coordination, geomagnetically induced currents, electromagnetic field, and Power Quality using PSS/E, ASPEN OneLiner, PSCAD, and Alstom electrical engineering technologies. Job Description What you'll do: More specifically, responsibilities include the following duties: * Conduct system performance analysis and provide solutions to support planning, operations, engineering, regulatory and financial needs of the company. * Perform electrical engineering studies related to power system stability, reliability, and compliance. * Perform transient and voltage stability studies, insulation coordination studies, electromagnetic field studies, and studies of geomagnetically induced currents and geomagnetic disturbance. * Perform power-flow analyses in support of system dynamic stability, system restoration, and geomagnetic disturbance analyses. * Develop and maintain power system models. * Calculate electromagnetic interference for overhead and underground transmission lines. * Technical Expertise: Keeps abreast of new products, developments, technologies, procedures and equipment. Understands and analyzes interrelationships between systems and component equipment. Interprets codes and regulations, and develops standards relevant to the area of assignment. * Leadership & Guidance: Provides guidance and exercises judgment and discretion in providing guidance and direction to other Engineers. Leads, facilitates and coordinates work activities of others within the work group, team, department, corporate entity, or those external to the company as required to perform all routine engineering work. Ensures all work activities are performed in accordance with the policies, practices, standards and rules of the company and complies with the regulations and procedures required by external agencies. Promotes engineering professionalism and standards. Coordinates and conducts training sessions. * Planning & Organization Ability: Participates in the development of plans by establishing measurable goals, objectives and requirements for specific areas of responsibility. Coordinates the development of input necessary to establish projected cost of all projects. Is proficient in use of scheduling techniques (CPM, PERT, flow charts, etc.) for budget and planning activities. Identifies and initiates appropriate corrective action when objectives are not being met. * Problem Solving & Initiative: Identifies, clarifies, resolves, and initiates solutions to routine and/or complex problems that sometimes involve analysis of inadequate or conflicting data. Demonstrates the ability to divide problems into component steps. Consistently looks for and develops opportunities and presents new ideas and approaches. * Communication: Coordinates the work of other engineers in an efficient and effective manner. Develops, reviews or prepares reports on complex technical subjects clearly, concisely and effectively, in a manner suitable for presentation to management, professional societies, regulatory bodies, etc. Leads and facilitates meetings effectively. Interpersonal Skills: Possess collaborative and consensus building skills. Functions as a team leader and member. Networks upward and downward in several disciplines inside and outside the AEP system. Leverages network to get things done. * Decision Making: Makes decisions affecting plans and goals based on analysis of uncertain input and outcomes. Uses diverse approaches to make decisions in the absence of a definite framework or where few precedents exist. Can handle conflicting interests related to approaches on projects or studies. Analyzes options and risks and possesses the experience and knowledge to assess the risk of decisions and act accordingly. Makes decisions that affect the operations or results of the department and may have some impact on a major project. * Business Awareness & Characteristics: Exhibits an awareness of AEP's competitive position and how business decisions impact their organizational unit. Understands the specific goals and objectives of their individual organizational unit and is proficient in establishing measurable goals and objectives. Effectively manages project budgets using cost management techniques and understands how their decisions and recommendations impact AEP's expenses and revenues. Demonstrates an awareness of profit incentives, optimizing growth of customers' businesses and using our services to attract new business. What we're looking for: Engineer Associate SG6 * This is an entry level position for new graduates with a Bachelor's degree in engineering in a program accredited by ABET* * Passing the Fundamentals of Engineering examination in preparation for future licensing as a Professional Engineer (PE) is encouraged and preferred. * VP or above may waive the requirement for a degree from a university with an Non ABET accredited program In addition: An Electrical Engineering Bachelor's degree is preferred for this role. Where you'll work: This role sits on site in New Albany Ohio or Columbus Ohio What you'll get: Engineer Associate SG6($84,000-$105,000) In addition to competitive compensation, AEP offers a unique comprehensive benefits package that aims to support and enhance the overall well-being of our employees. Where Putting the Customer First Powers Everything We Do At AEP, we're more than just an energy company - we're a team of dedicated professionals committed to delivering safe, reliable, and innovative energy solutions. Guided by our mission to put the customer first, we strive to exceed expectations by listening, responding, and continuously improving the way we serve our communities. If you're passionate about making a meaningful impact and being part of a forward-thinking organization, this is the company for you! American Electric Power (On-Site) $84K- $105K / Year #LI-Onsite #AEPCareers #engineer #earlycareer Compensation Data Compensation Grade: SP20-005 Compensation Range: $74,551.00 - $93,188.50 The Physical Demand Level for this job is: S - Sedentary Work: Exerting up to 10 pounds of force occasionally (Occasionally: activity or condition exists up to 1/3 of the time) and/or a negligible amount of force frequently. (Frequently: activity or condition exists from 1/3 to 2/3 of the time) to lift, carry, push, pull or otherwise move objects, including the human body. Sedentary work involves sitting most of the time but may involve walking or standing for brief periods of time. Jobs are sedentary if walking and standing are required only occasionally, and all other sedentary criteria are met. It is hereby reaffirmed that it is the policy of American Electric Power (AEP) to provide Equal Employment Opportunity in all respects of the employer-employee relationship including recruiting, hiring, upgrading and promotion, conditions and privileges of employment, company sponsored training programs, educational assistance, social and recreational programs, compensation, benefits, transfers, discipline, layoffs and termination of employment to all employees and applicants without discrimination because of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, veteran or military status, disability, genetic information, or any other basis prohibited by applicable law. When required by law, we might record certain information or applicants for employment may be invited to voluntarily disclose protected characteristics.

Introduction This position is within our systems engineering department. This division of the department's work is focused on mobile equipment's electronic control and electrical mechanical power transmission systems. Projects range from the component level through fully integrated system design and sub-system interaction. Key Responsibilities Electromechanical system design and component selection Size electric motors for propel, hydraulic pump, steering, and other electromechanical functions. Size and select mobile inverters and develop application software utilizing vendor software System design, hardware selection and software application development. Utilizing either a windows based graphical platform, vendor specific platforms, C /C++ variations Electrical schematic development in AutoCAD. Provide detailed responses to customer inquiries pertaining to electrical or electronic control components or systems. Typically, by email or telephone, but also through face-to-face meetings. Work with a team of applications engineers to support customers, field sales, internal customer service, and internal technicians. Work closely with other members of the application engineering team to review and share product knowledge. Regular communication with field sales team members to develop customer specific hydraulic and or electronic control system solutions. Travel to customer's location for system start up, troubleshooting, and training Desired Education & Qualifications B.S. in Electrical or Mechanical Engineering or Mechanical or Electrical Technology Desirable Skills & Experience Comfortable with multitasking and working in a team setting CAN protocols ( CAN OPEN, J1939 ) System FMEA analysis Hands-on technical aptitude DC electrical symbols and control methods Electric Motor types and control methods Battery technology ( Lead Acid, AGM, Lithium ) DC control wiring methods and skills Closed loop feedback systems ( PI / PID control theory ) Microsoft Office (Excel, Word, Power Point, Outlook) Programming experience ( C, C++, PLC, JAVA, XML, HTML ) AutoCAD / Inventor or other 2D and 3D platforms

Job Description Job Title: Systems Engineer Company: Virtual Technologies Group (VTG) Reports To: Help Desk Manager Department: Help Desk Operations Travel: N/A Hybrid Position Type: Full-Time Employee Type: FTE Compensation Range: $50,000 - $60,000 Annually Position Summary Virtual Technologies Group (VTG) is seeking a highly skilled and motivated Systems Engineer to join our growing Managed Services team. This role is ideal for candidates who have demonstrated consistent career progression, deep technical curiosity, and a passion for building and supporting modern IT environments. As a Systems Engineer at VTG, you will manage infrastructure solutions across a wide range of client environments. You'll work with Windows Server, virtualization platforms, networking technologies, and cloud-integrated systems while helping clients modernize and secure their IT operations. Candidates who maintain home lab environments, experiment with new technologies, and continuously push their technical boundaries will excel in this position. Minimum Qualifications 3-5+ years of hands-on IT experience in systems administration, infrastructure engineering, or MSP support roles. Demonstrated career progression or long-term growth within a single organization Experience deploying, configuring, and managing Windows Server environments. Experience with Group Policy (GPO) creation, management, and troubleshooting. Solid understanding of networking fundamentals, including VLANs, routing, switching, firewalls, and VPN technologies. Familiarity with Linux administration. Ability to document environments, follow change management processes, and communicate clearly with clients and colleagues. Strong problem-solving skills and the ability to work independently in fast-paced MSP environments. Hypervisor deployment and management. Preferred Qualifications Industry certifications such as: CCNA CompTIA Network+ LPIC Windows Server Hybrid Administrator Associate (AZ‑800) MCSE (legacy but valued) Experience with VoIP systems (SIP, hosted PBX, QoS Troubleshooting) Exposure to automation or scripting (PowerShell, Bash, Python) Hands-on experience with cloud or hybrid environments (Azure AD, M365, identity management) Familiarity with backup and disaster recovery solutions (Veeam, Datto, etc.) Demonstrated use of home lab environments for learning, testing, or deploying: Windows Server Virtualization stacks Networking labs Automation workflows MSP experience supporting multiple clients and diverse environments Strong customer service mindset and the ability to translate technical concepts into user-friendly language EEO Statement: VTG is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other legally protected status. We believe that diversity strengthens our team and drives innovation. All employment decisions are based on qualifications, merit, and business needs. If you require reasonable accommodation during the application or interview process, please contact ************. Powered by JazzHR JK4QIjquje