T.D. Williamson jobs in Dallas, TX - 11442 jobs

At TDW we put people first - that means working everyday to ensure the pipelines that run through our communities are operating safely and reliably. What sets us apart is our expertise, experience and commitment. Each day we dedicate ourselves to treating each other, our customers and our community with care and respect. Overview Acquire specific knowledge of TDW Hot Tapping and Plugging equipment and services operations through on the job and formalized trainings to become competent in field service work and get certified. Key Responsibilities Primary duties may include, but are not limited to: * Assists certified technicians in the handling, assembly, operation and disassembly of TDW HT&P equipment during field operations, keeps up to date on all equipment maintenance and operational procedures to ensure safe, proper maintenance and use of equipment and satisfactory completion of the job, * Complies with TDW and customer HSE standards and procedures, and stops any work utilizing TDW equipment when unsafe conditions exist that threaten equipment, property damage or bodily injury, * Collaborates with the certified technicians to the equipment shipment from the jobsite and drafting of the list of equipment loaded. * Acquires knowledge of TDW HT&P equipment functions, repairs and services to enable efficient field performance for HT&P field applications, and maintenance and repair of TDW HT&P equipment, * Learns and applies approved safety procedures to ensure the personal safety of all parties involved in the field work, * Follows standard troubleshooting procedures to alleviate problems encountered in the field, ensuring safe and efficient field performance from equipment, * Develops ability to respond to customer requirements and address problem solving aspects of all TDW field work. * Prepares and submits expense reports in accordance with established procedures. * Works in the workshop in equipment preparation/maintenance and stock management as required by the management. * Performs other tasks as may be required from time to time by upper management. Experience * Technical graduate combined with three (3) to five (5) years of experience in a mechanical field. * Experience in working overseas and/or in refineries or plants is an asset. Knowledge, Skills, and Abilities * Willing to travel extensively. * Good communication skills in English, any other language are an asset.

The Administrative Assistant position at Black Stone is responsible for providing administrative and strategic support to the Corporate Development and Legal Departments, while also coordinating and facilitating communications across all BSM departments. Working under the direction of the head of Corporate Development Finance, this role requires an ability to work independently and collaboratively while maintaining the daily workload. This is an excellent opportunity to work in a team-oriented organization. In This Role, You Will Provide day-to-day administrative support to the Legal and Corporate Development Teams. Organize and coordinate meetings, schedule travel, and register team members for required licensing seminars. Regularly utilize Microsoft Office Suite (Word, Excel, PowerPoint, Outlook, Teams, SharePoint) to prepare reports, presentations, meeting agendas, and other documents at the direction of team members. Manage all legal filings including ownership of the Litigation Dashboard, distributed monthly to the executive team. Manage departmental invoices, ensuring check processing requests and associated payments are submitted timely. Review, process and track all outside counsel invoices, obtaining final approval from head of department. Manage calendars and coordinate meetings for leadership, including preparation and document organization, including cross-departmental notice and coordination of same. Serve as a liaison for Board materials, Corporate Development Team coordination, and other cross-functional efforts. Proactive project tracking for executive-led initiatives and project deadlines; attend meetings to capture minutes and action items to help leadership stay aligned and responsive. Ensure timely preparation and delivery of high-quality reports and meeting materials. Provide backup support to other administrative assistants, including front desk/receptionist coverage, as required. Perform additional duties and special projects as assigned. What We Require Associate or bachelor's degree preferred, or equivalent in experience. Possess a minimum of 7 years of proven experience as an Administrative Assistant within the Oil and Gas, Investment Banking or Legal industries. Knowledge of land and legal transactions, and oil/gas terminology. Strong proficiency in Microsoft Office Suite (Excel, Word, PowerPoint, Outlook, Teams, SharePoint). Exceptional organization skills, including the ability to plan and adapt to changing priorities and work well under pressure with minimum supervision. Solid interpersonal communication skills and the ability to build relationships in a small team environment as well as with external parties. Bring a positive team player attitude that is dependable and committed to the objectives given. Self-starter with a proactive approach to problem-solving.

THIS JOB DESCRIPTION DOES NOT ATTEMPT TO LIST ALL OF THE DUTIES THAT ARE OR MAY BE PERFORMED IN THIS POSITION Primary Duties . 1. Due to complexity of work, works under close supervision in tandem with higher level Right of Way Agents involving, but not limited to the following: a. Analyzes easements, leases, licenses, permits, contracts and related right of way documents for compliance and to ensure proper maintenance of company assets. b. Researches and settles encroachment situations. Coordinates with Operations, Engineering, and Legal on any proposed encroachments. c. Maintains land rights documentation. Retrieves documentation as needed regarding prior company rights and establishes relocation liability costs for future road move projects. d. Reviews proposed residential and commercial developer plans that could result in Encroachment Agreements, Tract Releases, and defining of blanket easements. 2. Contacts various state, county and/or local agencies to secure permits for road, railroad, and bridge crossings and construction site excavations. 3. Assists in the coordination of activities between Engineering and Operations. MINIMUM REQUIREMENTS Educational/Experience: Bachelor's degree in Business, Real Estate, Engineering, or related field; or equivalent. Experience in right of way or natural gas is preferred. Communication Skills: Requires the ability to communicate with internal and/or external customers in order to obtain and/or provide basic types of factual information. Requires the ability to negotiate or persuade others. Numeric Skills: Requires the ability to perform basic addition, subtraction, multiplication and division. Computer Skills: Requires a working knowledge of various business computer applications in order to create standardized documents, reports or graphs. Advanced user with Microsoft Word, Microsoft Excel, Adobe Professional, and Google Earth. Work Conditions: Works in an office environment. Requires occasionally performing activities including, but not limited to, bending, stooping, grasping, reaching, twisting, turning and/or lifting. May require occasional travel. Atmos Energy Corporation is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, or veteran status. Job Family: Engineering

Calpine Corporation is America's largest generator of electricity from natural gas and geothermal resources with operations in competitive power markets. Its fleet of 77 power plants in operation represents over 27,000 megawatts of generation capacity. Through wholesale power operations and its retail businesses, Calpine serves customers in 22 states and Canada. Its clean, efficient, modern and flexible fleet uses advanced technologies to generate power in a low-carbon and environmentally responsible manner. The company was established on the premise that a strong commitment to the environment is inextricably linked to excellence in power generation and corporate responsibility. Since its founding in 1984, Calpine has led the power industry in its unwavering commitment to environmental stewardship. In addition, its renewable geothermal plants use steam generated deep below the earth's surface to produce clean, renewable electricity. Job Summary (includes but is not limited to the following, other duties may be assigned) The person in this role will be responsible for performing fundamental analysis, research, modeling, and understanding how it impacts Calpine's electric generation fleet. Job Responsibilities Support the continued development of: Calpine's modeling infrastructure, including price and market forecasting models, and building databases of fundamental market data. Present results to stakeholders coherently and efficiently. Works within broad guidelines to apply advanced technical knowledge of multiple functions to solve complex problems that may have a long-term impact on the company. Comprehensive knowledge. Seasoned professional with advanced applied experience. Applies advanced skills contributing to knowledge areas within function Makes recommendations on moderately complex issues regarding project components and tasks. May make recommendations on new processes, tools and services; supports and contributes to development of new products, services or techniques. Works on significant and unique issues and projects. Regularly uses independent judgment in the evaluation of intangibles or situations with minimal precedent or standards available for reference. Selects methods, techniques, analytical approach and evaluation criteria. Works on problems of diverse scope ranging from moderate to complex. Little instruction on day-to-day work, general instructions on new assignments. Serves as project/technical lead on small to medium sized projects; may coordinate work of professionals, technicians and others outside of own department. Resource integrator -builds professional networks and identifies and connects resources to achieve goals. Regularly contributes actionable ideas in brainstorming and planning sessions. Job Requirements Bachelor's Degree in a quantitative field (engineering, mathematics, natural sciences, finance) Expert knowledge with experience in Calpine's industry sectors of quantitative analysis, commodity valuation models and related systems. 3 - 5 years of energy industry experience, preferably in a commercial decision-support role Knowledge of the U.S. natural gas and power market, especially related to natural gas basis and regional supply and demand fundamentals. Strong coding and data processing skills (Python, R, or VBA) Knowledge and experience should cover a significant subset of the following: Experience working with data visualization and analysis tools. Familiarity with research tools such as Velocity Suite, Bentek, Genscape, and pipe flow data sources. Strong verbal and written communication skills. Expert in Microsoft Office Suite, with advanced skills in Excel and PowerPoint. Should be able to work autonomously and accept responsibility; deal with ambiguous tasks and be able to handle the pressure of multiple deadlines. The ability to combine knowledge of fundamentals, operations, and trading to make recommendations. Some knowledge of ISO/RTOs of North America Additional Calpine Information * Equal Opportunity Employer of Minorities, Females, Protected Veterans, and Individuals with Disabilities. * Calpine is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with physical and/or mental disabilities. If you are interested in applying for employment and need special assistance or an accommodation to use our website or to apply for a position, please send an e-mail with your request to *************************. Determination on requests for reasonable accommodation are made on case-by-case basis. Please view Equal Employment Opportunity Posters provided by OFCCP here

Specific Responsibilities Lease Operator I is responsible for gauging, reporting, maintaining and operating properties on a daily basis, using the skills he/she possesses to maximize production while maintaining the beliefs and core values of Apache Corporation. Gauge production on assigned wells, and report gauge readings, downtime and other pertinent well information to district office. Perform lease maintenance such as minor surface pump and production equipment repairs and adjustments; trim weeds, clean up trash, etc.; change stuffing boxes, grease pumping units, service lease equipment, etc. Note problems and/or recommend courses of actions to supervisor in order to decrease costs and increase production. Assist in witnessing meter calibrations; monitor rates and pressures on injection and disposal wells; make necessary adjustments; monitor chemical use; shoot fluid levels as required and test safety systems daily to maximize daily production. Assist with downhole pump changes, tubing replacement, etc. on artificially lifted wells; assist with pump and compressor maintenance such as oil changes, obtaining oil sample for analysis, pulling compressor valves, tests and repairs. Perform work in a manner that ensures the secure and environmentally safe operation of all wells and leases for which pumper is responsible. Conduct other tasks as required by supervisor which are unique to the assigned geographic area. Qualifications & Experience The successful candidate will have the following qualifications and experience: High school diploma 1+ years of relevant experience Must have a general knowledge of safe oil and gas production operations. Must have an interest in gaining knowledge of engineering principles and an understanding of subsurface and surface equipment and operations. Must be able to perform simple mathematic calculations, have good mechanical aptitude, good writing skills and have a good safety and driving record. Demonstrated proficiency with PC based computer applications. Competencies The successful candidate should demonstrate and exhibit the following core competencies: Communication: Writes, speaks, and presents information effectively and persuasively across communication setting; Results: Pursues work with energy, drive, and results orientation to positively impact Apache's business success; Collaboration: Works in partnership with others and encourages different perspectives, while building and maintaining trust; and Culture: Willingness and ability to align one's behavior with the needs, priorities, and goals of Apache. Company Overview Our primary product is energy, and where there is affordable, abundant energy, people are healthier, have access to better education, and are given greater opportunities to elevate their families to higher standards of living. Nearly 3 billion people - roughly one-third of the global population - live without electricity or without clean cooking facilities. We are committed to providing energy in innovative and more sustainable ways to help raise the standard of living for those living in energy poverty and to meet the ongoing demands of people and economies around the world. The products we deliver power increasingly cleaner electricity across the globe, fuel tractors and trucks, make fertilizer to keep the world's food supply on the table, and heat our schools, hospitals and businesses. Our employees bring a wide range of talents and skills to the job every day to tackle complex business challenges. We believe in providing a truly rewarding work environment supported by a benefits platform that ranks among the best in our peer group. Our company offers career development opportunities where employees can grow personally and professionally. We promote employee benefits that cultivate a family-friendly work environment and focus on our employees' overall well-being. We are committed to being a workplace where all employees are valued and can thrive with a sense of belonging. Our commitment to non-discriminatory, equal employment opportunities benefits our individual employees, our company and our external stakeholders; we are better as an organization when various experiences, ideas, and perspectives are brought to the table. Apache Corporation is a wholly owned subsidiary of APA Corporation (NASDAQ:APA). Apache has operations in the United States, Egypt's Western Desert and the United Kingdom's North Sea and a sister company with exploration opportunities offshore Suriname. Whether supporting Apache, APA Corporation or one of its subsidiaries, team members are employed by Apache Corporation. For additional information about APA Corporation, please visit: Portfolio Sustainability Investors *************** Apache Statement on Hiring To provide genuine equal opportunity to all people, it is the policy of Apache Corporation and its subsidiaries to base all employment-related decisions and actions exclusively on employment-related criteria. To provide genuine equal opportunity to all people, it is the policy of Apache Corporation and its subsidiaries to provide broad dissemination of job opportunities, as consistent with the nature of the positions. To provide genuine equal opportunity to all people, it is the policy of Apache Corporation and its subsidiaries to review its employment-related policies and actions on a regular basis to ensure that their application is consistent with their intent. Equal Employment Opportunity

Responsible for hauling tools and equipment to and from location securing safe and legal loads on a 24 / 7 on call basis. Functional Responsibilities Responsible for weight of shipment. Responsible for binding load properly. Responsible for vehicle maintenance. Ensure that truck has proper and current inspections. Compliance with all D.O.T. requirements. Must have ability to operate on lease roads safely with the ability to find job sites in a timely manner. Ability to make numerous Hot-shot runs or local pick-up and delivery in a Company Vehicle safely and within the boundaries of the law. Maintain driver qualification records and driving records. Ability and willingness to train to assist in the shop or field when not driving. Required to work on a 24 hours call basis. Work assignments carried out to the highest quality level. Must understand and comply with all safety rules and company policies. Complies with Company Rules and Regulations Ensure Personal Training is Up-To-Date Other duties as assigned by Manager or Supervisor Education High School/GED License and Certifications Valid CDL which meets Company Policy Required Skills Experience - SSE to 6 Months Language Skills - Ability to read and comprehend simple oral and written instructions and effectively communicate/present information one-on-one or in small group situations. Mathematical Skills - Basic Skills - Ability to add, subtract, multiply and divide. Reasoning Skills - Ability to apply common sense understanding to carry out detailed written or oral instructions. Ability to follow directions. Language Skills - Ability to read, analyze and interpret general business documents, professional journals, technical procedures and/or government regulations. Mathematical Skills - Basic Skills - Ability to read measurements and learn key metrics. Reasoning Skills - Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. Multi-tasking skills Required Knowledge Preferred knowledge of industry/service line/field equipment Must have knowledge of use of basic hand tools and oil field tools Must have ability to comprehend Casing Standard Operating Procedures (SOP's) and guidelines for implementation of SOP procedures. guidelines and Company policies. Must have mechanical aptitude. Must have ability to understand the English language. Must have the ability to find job locations in a timely manner Physical Demands This job requires frequent heavy work which is typical of an oilfield job. Employee will be exposed to outdoor weather elements, high noise and the potential of chemicals and fumes or gasses. Employee will stand or walk 50% of the time and frequently be asked to bend, squat, reach or climb. Employee must be physically capable of lifting, pulling, pushing tools and equipment up to 50lbs in a safe manner. Employee will be working at heights related to rig floor averaging 40' decks. Employee must be willing to work in a 24/7 environment Employee must have ability to work extended hours on location and / or away from home for extended periods. Employee will be exposed to moderate to high noise and the potential of chemicals and fumes or gasses in a shop environment or on location, if necessary.

HICO America, headquartered in Pittsburgh Pennsylvania with facilities in Los Angeles, Greensburg, PA, and Memphis TN, is part of the Power Systems business unit, in the Industrial Performance Group of the Hyosung Corporation, a large publicly traded corporation based in Seoul, South Korea. HICO is an ISO 9001 and 14001 certified company, with primary business in power system products. Manager or Director of Switchgear Execution Experience Qualifications: Minimum of five years managing High Voltage and Medium Voltage switchgear projects for an original equipment manufacturer (OEM), Electric Utility, or Developer. Educational Requirement: Bachelor of Science in engineering, supply chain, or business from an accredited university. Computer Skill Requirements: SAP, Microsoft Office Suite Skills required with Advanced Knowledge working with Microsoft Xcel and Microsoft Teams/360. Travel: 10% Manage the Switchgear Product Execution PMO department. Provide tactical guidance and strategic leadership to the project management team executing all switchgear product-only orders including Gas Circuit Breakers, MV GIS and HV GIS. Duties Include but are not limited to: Develop and evaluate current team of five project managers and coordinators Create process flow mapping to ensure consistency of execution across PM's Responsible for revenue and margin goals for department Advise senior leadership on staffing requirements with future backlog Ensure continuous improvement feedback loop Directly manage several GIS and GCB to increase experience and acumen Travel to customer and project sites as required Develop relationships with customer alliance partners Acquire technical expertise with our switchgear product offerings Ensure department executes their project work scopes according to following: Project budgetary performance of contractual scope of work obligations Submittal and schedule performance per contract and communication to customer stakeholders Customer perception and satisfaction Milestone and progress payment management and notification to HICO Accounting Warranty and MRO service level initial point of contact Responsible for estimating costs for HICO services with support from HICO Procurement Support review of final bid package as requested Attend project site and alliance meetings with customers as directed Project leader regarding the customer and internal HICO stakeholders: Single POC (Point of Contact) with customer Management and communication of schedule to customers, suppliers, and HICO stakeholders Communication of contractual milestones to factory and internal stakeholders. Potential travel to Memphis transformer production facility or project/customer locations. Coordination and support design review meetings Report any planned budgetary deficit to internal HICO stakeholders and determine root cause Support HICO procurement functions for his/her assigned projects Manage scope and budget of services including assembly, oil, HICO field service technicians Control costs of HICO services and sub-contractors Request and execute changes orders as required. HICO America provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics.

Blue Energy's mission is to unlock energy abundance, energy affordability, energy security, and turn-key decarbonization by developing the fastest path to deploying new nuclear MWs at scale. We are utilizing shipyard manufacturing supply chains and techniques from offshore oil and wind to reduce the cost of nuclear plants by over 60% and the manufacturing timeline to 24 months. Blue Energy is a platform technology that makes use of the latest NRC-approved reactors and is in negotiations with existing nuclear and industrial sites, enabling a much faster regulatory pathway to deploy our first unit. With our innovative centralized shipyard manufacturing approach, we can put nuclear power on a cost-reduction learning curve akin to wind, solar, and lithium-ion batteries. Role Summary The project scheduler is responsible for creating, updating and maintaining the overall project schedule. The scheduler will need to coordinate with project contractors, suppliers the project team to develop, update and maintain up to a level 5 detailed schedule. The scheduler will coordinate with engineering, procurement, construction and commissioning teams and all of the project Contractors and Suppliers. The Scheduler will coordinate with the project controls team to understand the appropriate and allocated timelines for project activities and update the team with progress status. The scheduler will coordinate closely with the various teams and contractors to integrate their schedules into the master project schedule and report out any significant changes or impacts to the overall schedule resulting from input. PRIMARY DUTIES Schedule Development & Management: Integrate the schedule and activities with the cost and progress base. Develop and maintain the detailed project schedules using Primavera P6 and other tools with the coordination and input from the team, contractors and suppliers. Support and Integrate engineering, procurement, construction, and commissioning activities into one master schedule that is reflected in the cost and progress base. Participate in identification of critical path, float, and schedule risks; recommend mitigation strategies. Proactively gather input from relevant parties for activities or status updates. Independently gather required information from various contributing parties. Additional Responsibilities Assist with "what if" scenarios if required. Participate in Risk Assessment analysis, updates and periodic team meetings. Present schedule activities, timelines and status in meetings and reports. Assist Project Manager and Construction Manger as needed. Assist with estimating activities and / or verification as it relates to schedule. Resource load schedule activities based on input from the estimate and / or responsible parties. MINIMUM QUALIFICATIONS 10+ years of qualified experience in the field and / or home office A minimum of 5 years of experience in project planning and scheduling. Ability to prepare documents using word processing (MS Word), presentation (MS PowerPoint) and spreadsheet (MS Excel) application software. Willingness to travel and / or work from Project Construction site or to other Company offices and supplier sites, as required, to coordinate project schedule information. Oracle Primavera P6 experience PREFERRED QUALIFICATIONS Experience with other "presentation" software (MS Visio, MS PowerPoint, etc.) Energy services experience is desirable. Bachelor's Degree in Engineering, Construction Management, or related field preferred but not required if experienced. 5-10 years of project controls / project scheduling experience on power generation or large industrial projects. Prior experience with gas turbines, HRSGs, and combined cycle plants. Proficient in standard tools (Primavera P6, MS Project, Excel, Word, etc.). Knowledge of EPC project lifecycle and interfaces between engineering, procurement, and construction. PREFERRED SKILLS Strong analytical and problem-solving skills. Excellent organizational and communication abilities. Experience supporting field teams during construction and start-up phases. Familiarity with risk management, resource leveling, and scenario planning. Strong ability to manage detailed work. We look forward to your application and helping foster an era of safe, clean, affordable, and abundant energy. Blue Energy is dedicated to building a diverse and inclusive workplace. If you're excited about this role but your experience doesn't perfectly align with every requirement, we encourage you to apply anyway. You might be the right candidate for this or other roles at Blue Energy now or in the future.

Laboratory Utility 1.0 Corporate Job Title Laboratory Utility 2.0 Reporting Relationships Lab Manager Pick-up, transport and deliver samples, equipment, supplies, documents and other work related items as per the direction of designated Operations personnel. Perform these tasks while acting in a professional and dignified manner so as to maintain the Company's respected and trusted reputation. 4.0 Minimum Requirements • Requires a H.S. Degree (or equivalent). • Must have a valid motor vehicle driver's license. • Must have a maintained and insured personal vehicle, unless a Company use vehicle is provided. • Must be dependable and be able to work independently with minimal supervision. Must be able to effectively communicate and maintain a professional appearance. 5.0 Responsibilities As instructed by the Laboratory Department and under the strict guidelines described in the Corporate manuals: • Maintain regular contact with the Laboratory Department in order to deliver and samples. • Possess and maintain a vehicle in order to perform duties in a timely manner. • Operate vehicle in a safe manner. 6.0 Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Some of the retain work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Some of the work is performed indoors or in a truck under climate-controlled conditions. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 1 hours. • Walking Weight Up to 45 lbs. -Duration/Day Up to 10 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 1 hour • Carrying Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 12 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs.- Duration/Day Up to 1 hour • Sitting Weight 5-8 lbs. -Duration/Day Up to 6 hours • Driving Weight N/A- Duration/Day Up to 6 hours All are required to perform this position This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Camin. All rights reserved.

The Senior Advanced Manufacturing Engineer will work with internal stakeholders and outside contractors to execute projects to support manufacturing scale up. This will require managing medium to large scale projects from concept, through capital funding planning and approval, and ultimately through successful implementation of automation and facility projects to meet the goals of the business. Responsibilities Demonstrated ability to effectively work with suppliers, outside contractors and stakeholders and recommend development of best practices to improve assembly/manufacturing methods and procedures. Impacts the achievement of part design related to design for assembly/manufacturing, error proofing, fixture design, and incorporating quality monitoring and improvement measures to drive results. Works independently and as part of a team on complex projects. Collaborate with partner groups in development and review of manufacturing process for new products, design changes, or new manufacturing methods. Recommend, evaluate, and implement new technologies to improve efficiency or enhance flexibility of manufacturing operations with a focus on launch site capability. Partner with leadership, operations and engineering teams to ensure that new equipment projects align with the manufacturing strategy and build plans. Be accountable to deliver operability, reliability, and functional integrity of automated manufacturing equipment for handover to operations. Lead facility expansion efforts to support scaling of manufacturing sites, new and existing. Education and Experience Bachelor's degree in engineering preferred Minimum of 10 years' experience Experience and understanding of complex automated manufacturing systems and components (electrical and pneumatic control, PLC and HMI devices, sensors, servo motors, vision systems, and robotics) Good understanding of supporting processes associated with the operations and maintenance of a production plant. Experience in manufacturing engineering and plant operations with direct experience in automated production processes, equipment support, and manufacturing best practices. Proficiency in use of AutoCAD Travel Overnight/North America: Less than 10% Working Conditions Office Environment - Must be able to remain in a stationary position 50% of the time and occasionally move about inside the office to access file cabinets, office machinery, etc. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading. May be required to exert up to 25 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body. Factory - The worker may be subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, vibration, moving vehicles, electrical current, exposure to temperature changes or exposure to chemicals. While performing the duties of this job, the employee may be exposed to fumes, airborne particles, odors, dust, mists, and gases. The noise level in the work environment can be loud. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Machinery operation requires the use of safety equipment to include but not limited to eye safety glasses, hearing protectors, work boots, and lab coats. May be required to exert up to 35 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body.

Are you ready to be part of a company that's not just talking about the future, but actively shaping it? Join The AES Corporation (NYSE: AES), a Fortune 500 company that's leading the charge in the global energy revolution. With operations spanning 14 countries, AES is committed to shaping a future through innovation and collaboration. Our dedication to innovation has earned us recognition as one of the Top Ten Best Workplaces for Innovators by Fast Company in 2022. And with our certification as a Great Place to Work, you can be confident that you're joining a company that values its people just as much as its groundbreaking ideas. AES is proudly ranked #1 globally in renewable energy sales to corporations, and with $12.7B in revenues in 2023, we have the resources and expertise to make a significant impact as we provide electricity to 25 million customers worldwide. As the world moves towards a net-zero future, AES is committed to meeting the Paris Agreement's goals by 2050. Our innovative solutions, such as 24/7 carbon-free energy for data centers, are setting the pace for rapid, global decarbonization. If you're ready to be part of a company that's not just adapting to change, but driving it, AES is the place for you. We're not just building a cleaner, more sustainable future - we're powering it. Apply now and energize your career with a true leader in the global energy transformation. AES Clean Energy is currently seeking a Senior Project Manager to oversee high impact photovoltaic solar and energy storage projects through development, construction, commissioning and turnover to Operations. The successful candidate will assist in due diligence on potential project acquisitions, lead construction planning activities, define EPC scopes of work for projects nearing construction, and act as an Owner's Project Manager to plan and oversee progress of active construction projects. This position will report to the Director of Project Management. The role requires the ability to manage high impact distributed generation and utility scale projects and portfolios and to travel periodically to project locations. Key Responsibilities: Define and document RFPs and scope of work packages for 3rd party EPC firms. Lead in EPC selection and contract negotiation. Conduct due diligence on potential solar sites, evaluate the suitability of identified sites and participate in due diligence review, analysis of various reports (i.e. environmental, geo-tech, etc.). Work alongside Development in determining internal budget and project schedules for a Project Execution Plan. Act as the Owner's Representative for Engineering, Procurement and Construction (EPC) Contract Management on high impact and utility-scale PV solar and energy storage projects in the US. Responsible for leading the EPC Contract negotiations with the project Legal, Contract Management and SME teams. Review and manage EPC Contractor schedules, budgets, scope, subcontractors, EHS plans, and permit compliance Manage and coordinate utility interconnection processes for construction projects and related documentation needed for project interconnection and testing Manage engagements with project stakeholders and act as a representative of the company for interactions with landowners, local governmental agencies, customers, contractors, equipment and materials suppliers, and other stakeholders. Support permitting and jurisdictional approval processes as needed for project construction. Coordinate with EPC contractors and equipment vendors to ensure adherence to and compliance with contract terms and delivery of contractual deliverables in accordance with the project budget and schedule. Manage and coordinate activities of internal team of project engineering, commissioning, procurement, asset management, legal, finance, and accounting staff as well as deliverables of EPC Contractor, project stakeholders, and regulatory and permitting authorities. Ensure project quality control and safe construction practices by conducting on-site inspections as needed, coordinating with 3rd party firms if necessary. Lead project status update meetings with AES management, energy off-takers, utilities, EPCs, and finance counterparties, facilitating discussions with a detailed project plan and high-level status dashboard. Manage the collection, organization and filing of all project documentation, both internally and for external third-party stakeholders and project financing needs Lead the coordination of project turnover exercises from Construction to the Asset Operations team for assigned projects. Assist with the development of internal operating policies, standards and procedures. Skills and Qualifications: Undergraduate Degree in engineering, project management, construction management, or equivalent. At least 10+ years professional experience in a project management role for the construction of renewable energy projects is required. Require familiarity with photovoltaic solar design and technical standards as well as civil and structural technical knowledge. Experience in leading EPC Contract negotiations required. Experience in utility scale PV solar project construction required, experience in energy storage preferred Project Management Institute PMP certification preferred. Strong proficiency with CPM scheduling. Superior communication and presentation skills, both written and verbal. Superior stakeholder management skills required Outstanding interpersonal skills, including an ability to maintain calm and effective exchanges by all parties during stressful situations. Excellent organizational skills demonstrated by clear and effective project plans and executive level reporting that ensure timely action and decision making in time-pressured scenarios. Proficiency in Microsoft Word, Excel and PowerPoint as well as Adobe Acrobat. Willingness and ability to travel to various project locations up to 30%. Spanish language skills a plus. AES is an Equal Opportunity Employer who is committed to building strength and delivering long-term sustainability through diversity and inclusion. Respecting all backgrounds, differences and perspectives enables us to improve the lives of our people, customers, suppliers, contractors, and the communities in which we live and work. All qualified applicants will receive consideration for employment without regard to sex, sexual orientation, gender, gender identity and/or expression, race, national origin, ethnicity, age, religion, marital status, physical or mental disability, pregnancy, childbirth, or related medical condition, military or veteran status, or any other characteristic protected under applicable law. E-Verify Notice: AES will provide the Social Security Administration (SSA) and if necessary, the Department of Homeland Security (DHS) with information from each new employee's I-9 to confirm work authorization. The expected salary for this position, at commencement of employment, is between $146,000 and $182,750/Annual; however, base pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, and experience. The total compensation package for this position may also include other elements such as annual bonus, in addition to a full range of medical, dental, vision, life, financial, and/or other benefits (including 401(k) eligibility and various paid time off benefits, such as vacation, sick time, and parental leave), dependent on the position offered. Details of participation in these benefit plans will be provided if a candidate receives an offer of employment. If hired, employee will be in an "at-will position" and the Company reserves the right to modify base salary (as well as any other discretionary payment or compensation program) at any time, including for reasons related to individual performance, Company or individual department/team performance, and market factors.

: John Crane, a business of Smiths Group, is a global leader in mission-critical flow control solutions for energy and process industries that enable efficient and sustainable operations. Our products include mechanical seals and systems, couplings, bearings, filtration systems, and predictive digital monitoring technologies. We have a global network of more than 200 sites in over 50 countries and employ more than 6,000 people worldwide. We partner with our customers to help them keep their operations safe, reduce downtime, improve efficiency, and meet the latest environmental standards. John Crane is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, helping to create a safer, more efficient, productive, and better-connected world across four global markets: energy, security & defense, space & aerospace, and general industrial. Listed on the London Stock Exchange, Smiths employs approximately 16,000 colleagues in over 50 countries. Job Description: We are seeking an experienced CNC Programmer to help modernize and improve our machining operations. This role is ideal for someone who thrives on problem-solving and wants to take an active role in converting legacy machines from manual programming to modern CAD/CAM and conversational programming platforms. Develop and maintain offline N/C programs using CAD/CAM software for CNC turning and machining centers. Analyze existing manual or outdated programming methods and transition machines to conversational or feature-based programming. Work with Hexagon or similar software platforms for automated programming and feature recognition. Maintain and update manufacturing databases and documentation related to standards, methods, tooling, and inspection. Interpret engineering drawings and specifications to determine manufacturing requirements. Collaborate with machinists and engineers to troubleshoot and resolve issues related to programming, tooling, and machining processes. Validate and verify CNC programs for accuracy prior to release to the shop floor. Specify machining data, tooling requirements, and work holding strategies. Participate in Lean Manufacturing initiatives and continuous improvement projects. Maintain organized records for all CNC programs and associated documentation. Qualifications: 3-6 years on-the-job experience in the Manufacturing or Industrial Engineering field. Proficiency in CAD/CAM systems (Mastercam, FeatureCAM, GibbsCAM etc.). Experience with conversational programming and upgrading legacy machines. Experience creating offline CNC programs compatible with Fanuc, Siemens, and Haas controllers, including post-processing for different machine platforms. Familiarity with Hexagon software or similar automated programming platforms. Strong understanding of machining processes, tool paths, and G-code. Ability to work independently while collaborating with cross-functional teams. Additional Information: With colleagues stretching across the globe, we are proud of our diversity. To foster inclusivity, we run employee resource groups (ERGs) to provide a safe space for employees to connect and support each other. Our cross-business ERGs include Veterans, Pride Network, Black Employee Network, Women@Work Network, and Neurodiversity. Across our company, we recognize excellence, culminating in the Smiths Excellence Awards, our annual celebration of the most extraordinary activities, people, and projects that best showcase our strengths and help drive our business forward. We announce these on our annual Smiths Day, a global celebration of Smiths around our network. Join us for a great career with competitive compensation and benefits, while helping engineer a better future. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation - including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career's website (Careers - Smiths Group plc)

An Operations Geologist's responsibilities at Matador, in our MAXCOM program (24-hr operations command center), are integral to our corporate success. Aspects of the role include operation geology, geosteering, well planning, collaboration with all asset teams, assisting in post-drilling well reviews, and integration with Drilling, Completion, and Production Engineers to optimize our operations program. Coordination with multi-discipline asset teams offers the opportunity to learn and be part of every facet of our operations, which are supported and monitored by MAXCOM program members. The MAXCOM program fosters the development of technical staff and future leaders while improving the overall effectiveness and efficiency of the operations-focused technical team. REQUIREMENTS & RESPONSIBILITIES Analyze and interpret geological data to guide drilling operations and make real-time decisions Coordinate mudlogging and on-site personnel to ensure successful geologic data collection Execute geosteering plans for drilling operations to ensure optimal well placement and production Communicate effectively with other departments and stakeholders to ensure alignment and successful execution of drilling operations Collaborate with drilling engineers to optimize drilling parameters and identify potential risks Direct communication with the Asset Team members to help identify, evaluate, and execute new drilling prospects and opportunities Collaborate with the asset development geologists to plan and execute development drilling programs Monitor well performance and recommend adjustments to optimize production Maintain accurate records, documentation, and data archiving from drilling operations MAXCOM Work schedule is a rotation of 7 days on/7 days off, 12-hour shifts (alternating days and nights) JOB BENEFITS Compensation includes industry competitive salary commensurate with experience, performance incentives, plus medical and dental benefits, 401(k), etc. Details are available upon application. Qualifications EDUCATION AND EXPERIENCE M.S. Degree in Geology or Geophysics preferred; current student applicants' graduation dates May 2024-May 2025 Previous industry internships or full-time experience preferred; Permian Basin and/or Delaware Basin field operations experience is a plus Strong written and verbal communication skills Detail oriented and organized with ability to work in a fast-paced setting and process work rapidly Starsteer, Petrel, and WellView software experience are a plus

Reporting to the Hardware Engineering Manager, the Electrical Designer will provide design and document support to the Hardware Engineering and other engineering groups as related to the development of Eos Battery Storage Systems. This is an internally facing position for a Electrical Designer with solid technical experience and the ability to work in a fast-paced work environment. Responsibilities Working from detailed sketches or off redlines to prepare site plans, single- and three-line electrical diagrams and detailed drawings within CAD/MicroStation/SolidWorks Draft Sight in 2D and 3D environment. Generate point maps for all hardwired and digital I/O for BESS control systems from detailed sketches or redlines. Develop single Line Diagrams, layouts, schematics with all standards, clearances. Create spatial layouts utilizing map importing of KMZ and SHP typical files. Understand, use, and contribute to establishing company standards for drafting, including layer names; line and character styles; drawings and file names for sheet layouts. Champion and manage project-specific BOMs (Bill of Materials) in collaboration with the Manufacturing group. Own and manage the internal lessons learned database, ensuring accuracy with input from Engineers. Support the generation of drawings for RFIs and RFPs with customers and business partners. Review and analyze documents, identifying drawing and specification conflicts, insufficient information, and missing dimensions while contributing ideas to enhance efficiency. Work independently with minimal guidance. Knowledge, Skills, and Abilities Extremely proficient in CAD (2D & 3D) US Industry Standards (i.e. - ANSI, IEEE, NEMA, NEC, UL) Electrical Design for Constructability Ability to self-direct to a goal and achieve independent success. A team-player attitude and strong written/verbal communication skills are a must. Attributes Required Fostering Teamwork: As a team member, the ability and desire to work cooperatively with others on a team; the ability to demonstrate interest, skill, and success in a collaborative environment. Building Collaborative Relationships: The ability to develop, maintain, and strengthen partnerships with others inside or outside the organization who can provide information, assistance, and support. Strong spirit of collaboration and proven ability to work across diverse groups. Gives feedback thoughtfully and receives it gracefully. Comfortable with distributed decision making and empowerment. Forward Thinking That Can Scale: Balancing “scrappiness” and strategic thinking. The ability to anticipate the implications and consequences of situations and take appropriate action with speed and clarity in preparation for possible contingencies. Must be able to simultaneously focus on big picture, details, and driving results. Personal Credibility and Confidence: Demonstrates concern for being perceived as responsible, reliable, and trustworthy. Highly self-motivated and results-driven with a can-do attitude. Does what he/she commits to doing. Education and Experience Associate's degree in engineering technology, computer aided designed, or similar required. Minimum of 2 years' experience Travel Overnight/North America: Less than 10% Working Conditions Office Environment - Must be able to remain in a stationary position 50% of the time and occasionally move about inside the office to access file cabinets, office machinery, etc. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading. May be required to exert up to 25 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body.

If you don't see a specific job listing that matches your skills and interests, we encourage you to apply to our General Opportunity posting. We're always on the lookout for talented individuals who can contribute to our team in various capacities. Your application will be carefully considered for any suitable openings that may arise.Values Communicate Openly and Honestly - We foster a culture where everyone, from intern to CEO, can speak openly. Clear communication builds trust, drives better decisions, and keeps us grounded. Define Excellence - Excellence means constantly pushing to be better, to lead, and to set the bar for others. We don't settle. We evolve, improve, and shape the future of our field with every decision we make. Do the Right thing - Integrity is why 5 was founded. We hold ourselves to the highest ethical standards, with zero tolerance for less. Our reputation is our brand, and we're relentless in protecting it, without compromise. Have Fun - Fun means finding joy in learning, tackling challenges, and pushing past our comfort zones. It's the satisfaction that comes from doing hard things with great people and not taking ourselves too seriously along the way. Make an Impact - We started 5 because people deserve better. It's what drives us each day, to make a difference for a colleague, client, or our community. This value reminds us that our work should always make life better for someone. Why 5?As our name suggests, 5 isn't like other places to work. Our goal has been to build a culture where we compete against what is possible. To do this, we've assembled a team of smart, fun, passionate, and hard working people. At 5, we have engineers, commodity traders, sustainability experts, coders, energy analysts, business development professionals, financial professionals on the team... And we are always looking for more stunning colleagues. If you want to make a difference in your career and for other people, we should talk.

is based in the Oklahoma City, OK area * Detailed Description: * Develop relationships and contact customer decision-makers to generate business for MSD * Adhere to the Company's Code of Business Conduct and Ethics * Represent the Company and our values with integrity while maintaining the highest ethical and legal standards with all customer interactions * Demonstrate financial responsibility in adherence to the Company's travel and entertainment policy * Regularly visit (drive to) customer locations to develop relationships, and contact customer decision-makers to generate business for MSD * Prepare written reports, cost benefit analysis, solution-oriented presentations, and sales and price quotations to compete for customer business * Ensure systematic delivery and resolution of customer inquiries and information gathered about customer satisfaction to the appropriate Company personnel/departments * Develop, demonstrate and deliver value cases for different levels of customer * Develop new prospects, and interact with existing customers, to increase sales, products, and/or services across all types of well servicing * Assess the potential application of Company products or services, and offer solutions that meet customer needs * Conduct intelligence gathering on current and potential customers and competitors. * Communicate and coordinate with Operations, to understand activity levels, equipment utilization, competitive advantages, growth strategy and customer satisfaction. * Work directly with operations to identify and improve upon daily operations to continually drive towards Operational Excellence * Develop positive relationships with other employees in Operations, Marketing, Product Development, and other departments as needed * Use technical knowledge of product offerings to support and build sales * Communicate customer feedback into future product developments * Represent the Company in the marketplace through various industry organizations (SPE, AADE, IADC, etc.) and other industry events * Keep well-informed on current industry trends, opportunities, products and competitive issues * Self-driven to ensure MSD is being represented every day in a manner consistent with the Company's Core Values. * Attend and participate in sales meetings, product seminars, trade shows and professional organizations as appropriate * Position MSD as a market leader within the industry * Develop strong long-lasting relationships at every level within customer's organization. * Keep accurate track of AR Invoices and ensure timely payment from customers Job Requirements: * Excellent business prospecting skills and strong negotiation skills * Strong relationship builder * Excellent communication and presentation skills * Ability to function in a high-pressure environment, and to respond well to a high level of stress * Ability to make well informed decisions within tight time constraints consistent with the Company's Core values * Ability to work weekends and/or additional hours that are needed to complete specific job tasks * Ability to travel on a regular basis Minimum Qualifications: * High School Diploma or GED * 3+ years business development or sales experience * Eligible to meet requirements to drive on Company business Preferred Qualifications: * Bachelor's Degree in Business Management, Marketing or a related field * Prior energy services sales experience * Proven Mid-Con sales history based in OKC * Directional Drilling Sales experience Additional Details: Variable work hours include regular after-hours, weekend, and holiday commitments as well as regular travel within and outside assigned region. The Sales Representative must work with an emphasis and prioritization to maintain a professional attitude when interacting with all Company and customer representatives. Must be able to work closely with others and manage customer interaction in a professional manner.

High school diploma as well as the successful completion of a four-year apprenticeship is required to become a lineman. Possess excellent problem-solving, troubleshooting and organizational, and analytical skills. Must have a valid CDL license Responsible for the installation, repair and maintenance of overhead and underground electrical power lines and auxiliary equipment. This includes work from power plants to the meters of customers homes. Additionally, a lineman digs trenches for the installation of underground lines, install meters, climb poles to repair overhead lines and inspect power lines for possible repair or replacement.

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, The American Red Cross, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning 12,000 strong organization as we fuel the world and each other! Summary: As an entry-level Repairman you will be trained in Panhandle Eastern Pipe Line Company's Safety, Operation and Maintenance procedures related to plant facilities and equipment Essential duties and responsibilities: To perform this job successfully, an individual must be able to perform each essential job duties satisfactorily. The requirements for this position are listed below: * Performs operations and maintenance duties related to pipeline and compressor station operations and equipment. * Assists in repairs and maintenance of compressor equipment and associated facilities * Assists in maintaining and repairing of the pipeline right-of-way. Installs and maintains pipeline markers * Investigates pipeline encroachments and locates and temporarily marks pipelines. Represents the Company during line crossings ensuring Company requirements are met * Communicates with supervision, third parties, and other personnel on job-related situations and matters * Completes certain routine administrative duties such as Reports of Time Worked, Expense Accounts, Mileage Reports and Accident Reports. * Maintains good housekeeping practices * Maintains Operator Qualifications required to perform assigned duties. Requirememts: * High school diploma or GED * Strong mechanical background with working knowledge of engines, electric motors, compressors, valves, and work equipment and tools * Physical ability required to perform the essential elements of the position, including shoveling, painting, lifting, working in extreme high and low temperatures, and general manual labor * Able to develop the ability to interpret, use, and follow piping schematics, drawings, maps, and operating procedures Working Conditions: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Must Live or relocate to within 50 miles of the reporting location. * Lifting up to 50 lbs occasionally. * Driving, walking, standing frequently. * Exposure to adverse weather, cramped conditions and some heavy lifting Working Conditions: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of the job. * Visits to industrial/manufacturing settings, which may include exposure to various materials and chemicals, as well as extreme temperature conditions and loud machinery, and require appropriate personal protective equipment. * The position is subject to call-outs during off-duty hours, including weekends. * Overnight travel will be required.

Job DescriptionPetroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.