Service Technician jobs at TEC Equipment - 678 jobs

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Defense, Space and Security (BDS) has an exciting opportunity to support the Phantom Works Team in Las Vegas, NV as a General Repair Technician! Position Responsibilities: Maintains complex equipment and systems by removing, replacing, repairing or upgrading components. Troubleshoots problems to isolate faulty components. Conducts complex functional tests by operating equipment and using appropriate test equipment. Performs a variety of inspections as required by equipment maintenance documents. Documents maintenance and inspection actions as required. Trains and resolves problems for less experienced technicians. Leads and directs the work of other technicians Documents maintenance and inspection actions as required. Works under general supervision Works with minimal direction This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position requires an active U.S. Top Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Basic Qualifications (Required Skills / Experience): 3+ years experience with the layout, mockup and fabrication of tubing systems 3+ years of experience working with laser trackers or a CMM (coordinate measurement machine) 3+ years of experience using 3D scanning equipment and/or traditional measurement tools 3+ years of experience with 3D CAD modeling Preferred Qualifications (Desired Skills / Experience): * Experience in a military or commercial aircraft environment highly preferred Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Shift: * This position is for 1st shift (This position may require candidate to work 2nd or 3rd shift after training) Relocation: * This position is located in a location that does not offer relocation. Candidates must live in the immediate area or relocate at their own expense Total Rewards: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $82,450-$115,000 USD Applications for this position will be accepted until Feb. 04, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation Relocation assistance is not a negotiable benefit for this position. Security Clearance This position requires an active U.S. Top Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. Read more Shows the full job description for sighted users Apply Now Save JobRemove Job

Job Title: Maintenance Support Technician Zip Code: 89101 Pay Rate: $32.00 - $36.00 an hour Schedule: Monday - Friday, 7:00AM to 3:30 PM Keywords: #maintenance #mechanical #electrical As Field Technician 3, you will provide technical and leadership support for all material handling equipment. You will be focused on maintenance, repair and some Installation of automation equipment at a variety of customer sites. Additional duties will include administrative tasks such as reports, inventory control, customer relations during site visits as well as facilitating cross training and mentorship. RESPONSIBILITIES: Provide technical expertise and leadership in the installation, support, and repairs of various material handling equipment. As needed, provide support remotely by phone or computer. Identify equipment faults. Develop and implement fault resolution plans. Communicate with customers and supervisors on equipment status, performance, and improvement opportunities. Collaborate with team to develop and implement equipment performance and reliably plans utilizing root cause analysis and performance observations. Provided in-depth maintenance and support on conveyor and sortation equipment operations to include removal, installation, startup, calibration, preventive maintenance and functional utilization. Solid understanding of controls systems, PLC, and communication networks. Readily available to go onsite for technical emergencies/ customer support at any time. REQUIREMENTS: Possesses a technical degree or 4-7 years equivalent work experience, MSSC Certification in Network Repair or Military training in the fields of electronic, radio, or mechanical systems in lieu of degree. Three or more years" experience leading teams. Experience troubleshooting Servo drives, PLC, PC controllers, dc power supplies, optical devices (i.e., encoders, photo eyes, etc.) Electrical troubleshooting skills to include wiring, AC power, AC motors, electrical drawings/schematics, and control panels. Ability to work alone and / or provide technical direction to team members. Ability to utilize CMMS to document work performed at customer sites Ability to obtain and maintain certification to operate various forklift equipment. Perform root cause analysis utilizing strong problem-solving / trouble-shooting skills. Ability to communicate and execute classroom and practical training activities Demonstrate detailed knowledge of industrial safety standards to include LOTO and PPE. Strong electrical mechanical background and ability to troubleshoot problems. Mechanical experience with gearboxes, sprockets, chains, bearings, guide rollers, etc. Excellent verbal communication skills, written and verbal. Have excellent customer service / interpersonal skills and possess a logical problem- solving mindset. Knowledge of conveying systems and MS Office Suite. Must be self-motivated, detailed oriented and results focused. If you are interested in this role, please apply via the apply now link provided. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract, temporary, temp-to-hire, and direct assignments. We are the employer of choice for thousands worldwide. For more information, please visit our website at Belcan.com "Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws."

We move people. We help them get to work, school, or play. From A to B, and everything in between. By shuttle, bus, charter or valet, we find creative ways to move people, business, and communities forward. We partner with some of the world's leading companies to create personalized transportation systems and hospitality experiences. We go above and beyond to remove stress in all interactions and make things a little easier for all we serve. The A-Level Technician is responsible for advanced diagnostics, major repairs, and proactive maintenance of Heavy Duty fleet vehicles. Working closely with fellow technicians and Operations, this role ensures vehicle reliability through accurate scheduling, field repairs, and timely change-outsminimizing service disruptions and supporting safe, efficient transportation for staff and clients. Compensation: $40.00 - $50.00 / Hour with a $7,500 sign-on bonus Benefits: $2,000 per year tool allowance Medical, Dental, Vision & Life Insurance 401k with matching Holiday pay Company provided uniforms with in-house weekly uniform cleaning service Paid Time Off- up to 80 hours per year with increasing amounts based on your years of service Flexible work schedules (4 10's, evenings, weekends and part-time available) Responsibilities: Regularly inspecting vehicle systems, including suspensions, steering and exhausts condition and operational safety; ensure maintenance of the highest level, including physical appearance. Repairing vehicle transmission, brakes, engines and other associated parts. Address immediate fleet concerns and maintain fleet maintenance records: review driver defect reports daily, review PMs and trouble-shoot/resolve issues to reduce the number of road calls and ensure a prominent level of safety within all operations. Track daily vehicle reports, labor hours, maintenance, and repair records to ensure all maintenance files are accurate and current. Conducting field visits in the case of an emergency or sudden breakdown, make appropriate arrangements to have inoperable vehicle or equipment repaired or towed. Supports the IT Team in the management of on-board shuttle technology such as Wi-Fi devices, telematics systems and vehicle tablets to ensure the systems are functional and installed accordingly. Preparing work plans after fully scoping out the issue. As needed assign work order to B and C level technicians. Test driving repaired vehicles to gauge their performance. Running diagnostic tests on diesel engines and interpreting the results to offer suitable solutions Maintaining records of parts inventory and serviced vehicles. Other duties as assigned. Requirements: Must be at least 21 years of age 5+ years of maintenance experience working with a variety of vehicles; experience with transit buses and motor coaches strongly preferred 609 (EPA) HVAC Certification Advanced knowledge and hands-on experience with HD electrical systems, air brakes, and suspension systems Proficient in the use of diesel engine diagnostic software, including but not limited to Cummins Insite, QuickServe, AllData, WABCO, and Bendix High School Diploma or equivalent required; technical school training preferred Acceptable Motor Vehicle Record Current/Active DOT Medical Card Must pass pre-employment DOT drug test Able to communicate proficiently in English Ability to be flexible in schedule to meet operational needs. This may require occasionally working outside of regularly scheduled hours. Must be willing to work in outside environments, which may include inclement weather. Preferred Qualifications: ASE-Medium-Heavy Truck and ASE-School Certification ASE School and Transit Buses Certification Powertrain Certification Commercial Drivers License (Class A or B) with Passenger (P) endorsement preferred; CDL training may be provided for qualified Fleet Technicians TransWest Culture: Come join our close-knit team. We enjoy having summer BBQs, holiday parties, games, contests and so much more at our bus yards and in the office. Our Commitment to Diversity, Equity, Inclusion, and Belonging:At TransWest, we pride ourselves on building a diverse workforce and collaborative spaces where people of different lived experiences, backgrounds, abilities, and identities can thrive. Everyone on the team at TransWest emphasizes and practices our core values every day that are based on continued growth, reliability, safety, caring for our work, clients, and each other. Our commitment to diversity, equity, and inclusion is an evolving area where we will continue to listen and learn from our team members, business partners, community partners, and thought leaders to optimize our impact.

Associated Packaging is looking for amazing and talented people like you! Join our team today and become part of one of the fastest growing companies and industries in the country. Employees of Associated Packaging, Inc. enjoy an energetic and people-first company culture. We are excited to offer a premium benefits package including PTO, Employee Assistance Programs, 401k matching, Health Insurance, Medical Insurance, Dental Insurance, Vision Insurance, and much more! The Equipment Service Technician provides excellent technical services and customer service experiences maintaining strong relationships with manufacturers, suppliers, and sales representatives. As such, you must be a positive, energetic leader who excels in working in a collaborative environment. Must have reliable transportation. Local travel and overtime required. Key Duties & Responsibilities: Perform all on-site installation, repair, maintenance, and troubleshooting tasks providing instructional training to customers Continual training of equipment and resources necessary to perform the functions of the department Attend Branch and Technical Service meetings scheduled by Service Manager or Branch Mgr. Consistently deliver excellent customer service experiences by offering knowledge, advice, and answering questions and concern Manage excellent vendor relationships by providing timely communications, problem-solving, and site visits key suppliers when necessary Coordinate with VP of Sales and Sales Representatives to provide excellent customer support Diagnose errors or technical problems by visual and auditable inspection of machines and determine proper solutions Dismantle machines and equipment to gain access to and resolve issues Diagnose, install, and repair electrical apparatus such as transformers and wiring, electrical, electronic components of machinery and equipment Produce timely and detailed service reports Monitor work procedures, work schedules, and expedite workflow Create and submit a completed expense report each month Assist with office / warehouse needs as time permits Education and/or Experience: A minimum 3-5 years of experience in machinery and conveyor equipment experience is required. High school diploma or its equivalent is required. Competencies: Exceptional customer service and must be people-oriented with the ability to build business relationships Proficient computer skills including MS Office Suite, Allen Bradley or equivalent PLCs, smartphones, and tablets Local travel and overtime required Minimal overnight travel required Dependable transportation required, valid driver's license, and proof of insurance Familiarity with scheduling and expediting the turnaround time on service calls Analytical, problem solving, business analysis, and project management skills Why work at Associated Packaging, Inc.? Longevity - Associated Packaging, Inc. has been providing packaging solutions for companies since 1977. Stability - Even during times of recession and economic uncertainty, Associated Packaging, Inc. has remained financially strong and experienced tremendous growth. Customer Service - We focus on partnering with our customers to find and maintain the best solution possible for their packaging needs. Our customers consider us problem solvers and profit enhancers. Our People - At Associated Packaging, Inc., people are our greatest asset. We value each employee and know that great success comes from a great team.

We move people. We help them get to work, school, or play. From A to B, and everything in between. By shuttle, bus, charter or valet, we find creative ways to move people, business, and communities forward. We partner with some of the world's leading companies to create personalized transportation systems and hospitality experiences. We go above and beyond to remove stress in all interactions and make things a little easier for all we serve. The A-Level Technician is responsible for advanced diagnostics, major repairs, and proactive maintenance of Heavy Duty fleet vehicles. Working closely with fellow technicians and Operations, this role ensures vehicle reliability through accurate scheduling, field repairs, and timely change-outsminimizing service disruptions and supporting safe, efficient transportation for staff and clients. Compensation: $40.00 - $50.00 / Hour with a $7,500 sign-on bonus Benefits: $2,000 per year tool allowance Medical, Dental, Vision & Life Insurance 401k with matching Holiday pay Company provided uniforms with in-house weekly uniform cleaning service Paid Time Off- up to 80 hours per year with increasing amounts based on your years of service Flexible work schedules (4 10's, evenings, weekends and part-time available) Responsibilities: Regularly inspecting vehicle systems, including suspensions, steering and exhausts condition and operational safety; ensure maintenance of the highest level, including physical appearance. Repairing vehicle transmission, brakes, engines and other associated parts. Address immediate fleet concerns and maintain fleet maintenance records: review driver defect reports daily, review PMs and trouble-shoot/resolve issues to reduce the number of road calls and ensure a prominent level of safety within all operations. Track daily vehicle reports, labor hours, maintenance, and repair records to ensure all maintenance files are accurate and current. Conducting field visits in the case of an emergency or sudden breakdown, make appropriate arrangements to have inoperable vehicle or equipment repaired or towed. Supports the IT Team in the management of on-board shuttle technology such as Wi-Fi devices, telematics systems and vehicle tablets to ensure the systems are functional and installed accordingly. Preparing work plans after fully scoping out the issue. As needed assign work order to B and C level technicians. Test driving repaired vehicles to gauge their performance. Running diagnostic tests on diesel engines and interpreting the results to offer suitable solutions Maintaining records of parts inventory and serviced vehicles. Other duties as assigned. Requirements: Must be at least 21 years of age 5+ years of maintenance experience working with a variety of vehicles; experience with transit buses and motor coaches strongly preferred 609 (EPA) HVAC Certification Advanced knowledge and hands-on experience with HD electrical systems, air brakes, and suspension systems Proficient in the use of diesel engine diagnostic software, including but not limited to Cummins Insite, QuickServe, AllData, WABCO, and Bendix High School Diploma or equivalent required; technical school training preferred Acceptable Motor Vehicle Record Current/Active DOT Medical Card Must pass pre-employment DOT drug test Able to communicate proficiently in English Ability to be flexible in schedule to meet operational needs. This may require occasionally working outside of regularly scheduled hours. Must be willing to work in outside environments, which may include inclement weather. Preferred Qualifications: ASE-Medium-Heavy Truck and ASE-School Certification ASE School and Transit Buses Certification Powertrain Certification Commercial Drivers License (Class A or B) with Passenger (P) endorsement preferred; CDL training may be provided for qualified Fleet Technicians TransWest Culture: Come join our close-knit team. We enjoy having summer BBQs, holiday parties, games, contests and so much more at our bus yards and in the office. Our Commitment to Diversity, Equity, Inclusion, and Belonging:At TransWest, we pride ourselves on building a diverse workforce and collaborative spaces where people of different lived experiences, backgrounds, abilities, and identities can thrive. Everyone on the team at TransWest emphasizes and practices our core values every day that are based on continued growth, reliability, safety, caring for our work, clients, and each other. Our commitment to diversity, equity, and inclusion is an evolving area where we will continue to listen and learn from our team members, business partners, community partners, and thought leaders to optimize our impact.

We move people. We help them get to work, school, or play. From A to B, and everything in between. By shuttle, bus, charter or valet, we find creative ways to move people, business, and communities forward. We partner with some of the world's leading companies to create personalized transportation systems and hospitality experiences. We go above and beyond to remove stress in all interactions and make things a little easier for all we serve. The A-Level Technician is responsible for advanced diagnostics, major repairs, and proactive maintenance of Heavy Duty fleet vehicles. Working closely with fellow technicians and Operations, this role ensures vehicle reliability through accurate scheduling, field repairs, and timely change-outsminimizing service disruptions and supporting safe, efficient transportation for staff and clients. Compensation: $40.00 - $50.00 / Hour with a $7,500 sign-on bonus Benefits: $2,000 per year tool allowance Medical, Dental, Vision & Life Insurance 401k with matching Holiday pay Company provided uniforms with in-house weekly uniform cleaning service Paid Time Off- up to 80 hours per year with increasing amounts based on your years of service Flexible work schedules (4 10's, evenings, weekends and part-time available) Responsibilities: Regularly inspecting vehicle systems, including suspensions, steering and exhausts condition and operational safety; ensure maintenance of the highest level, including physical appearance. Repairing vehicle transmission, brakes, engines and other associated parts. Address immediate fleet concerns and maintain fleet maintenance records: review driver defect reports daily, review PMs and trouble-shoot/resolve issues to reduce the number of road calls and ensure a prominent level of safety within all operations. Track daily vehicle reports, labor hours, maintenance, and repair records to ensure all maintenance files are accurate and current. Conducting field visits in the case of an emergency or sudden breakdown, make appropriate arrangements to have inoperable vehicle or equipment repaired or towed. Supports the IT Team in the management of on-board shuttle technology such as Wi-Fi devices, telematics systems and vehicle tablets to ensure the systems are functional and installed accordingly. Preparing work plans after fully scoping out the issue. As needed assign work order to B and C level technicians. Test driving repaired vehicles to gauge their performance. Running diagnostic tests on diesel engines and interpreting the results to offer suitable solutions Maintaining records of parts inventory and serviced vehicles. Other duties as assigned. Requirements: Must be at least 21 years of age 5+ years of maintenance experience working with a variety of vehicles; experience with transit buses and motor coaches strongly preferred 609 (EPA) HVAC Certification Advanced knowledge and hands-on experience with HD electrical systems, air brakes, and suspension systems Proficient in the use of diesel engine diagnostic software, including but not limited to Cummins Insite, QuickServe, AllData, WABCO, and Bendix High School Diploma or equivalent required; technical school training preferred Acceptable Motor Vehicle Record Current/Active DOT Medical Card Must pass pre-employment DOT drug test Able to communicate proficiently in English Ability to be flexible in schedule to meet operational needs. This may require occasionally working outside of regularly scheduled hours. Must be willing to work in outside environments, which may include inclement weather. Preferred Qualifications: ASE-Medium-Heavy Truck and ASE-School Certification ASE School and Transit Buses Certification Powertrain Certification Commercial Drivers License (Class A or B) with Passenger (P) endorsement preferred; CDL training may be provided for qualified Fleet Technicians TransWest Culture: Come join our close-knit team. We enjoy having summer BBQs, holiday parties, games, contests and so much more at our bus yards and in the office. Our Commitment to Diversity, Equity, Inclusion, and Belonging:At TransWest, we pride ourselves on building a diverse workforce and collaborative spaces where people of different lived experiences, backgrounds, abilities, and identities can thrive. Everyone on the team at TransWest emphasizes and practices our core values every day that are based on continued growth, reliability, safety, caring for our work, clients, and each other. Our commitment to diversity, equity, and inclusion is an evolving area where we will continue to listen and learn from our team members, business partners, community partners, and thought leaders to optimize our impact.

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airlines is excited to offer opportunities for a Refrigeration & Air Conditioning Technician to join our Facilities team in Puget Sound, Washington. As a Refrigeration & Air Conditioning Technician, you will have the opportunity to work on a diverse range of HVAC-R equipment, including heating, ventilation, air conditioning, and refrigeration systems. Your expertise will be essential in laying out, constructing, installing, maintaining, and troubleshooting these systems to ensure optimal performance in our plant facilities. You will engage with advanced controls and components, utilizing your skills to read blueprints, make precise adjustments, and perform routine maintenance. Your role will involve collaborating with various teams, diagnosing malfunctions, and implementing effective solutions to enhance system reliability. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities Lay out, construct, install, maintain, and repair HVAC-R equipment, including associated controls and components. Work from blueprints, sketches, and verbal instructions to complete assigned tasks effectively. Utilize testing equipment to read and adjust controls for optimal system performance. Install and adjust valve controls, perform electrical wiring, and set up electronic controls for HVAC-R systems. Troubleshoot, repair, and maintain various types of refrigeration and air conditioning equipment. Conduct routine maintenance on HVAC-R systems according to the Preventative Maintenance schedule. Service HVAC-R equipment in office, commercial, and industrial settings based on service requests. Collaborate with customers, vendors, and engineers to gather information on equipment operations and maintenance history. Monitor system operations using the Energy Management Control System (EMCS) and perform visual inspections for defects. Diagnose malfunctions in mechanical, electrical, plumbing, or electronic systems and develop corrective action plans. Maintain and program moisture control, airflow, and thermal balance to ensure indoor air quality. Install, maintain, and leak test refrigeration systems, adhering to safety practices and refrigerant handling protocols. Assemble and attach refrigeration components using appropriate methods, including soldering and brazing. Perform precision alignment of equipment using tools such as lasers and dial indicators. Monitor and maintain water and chemicals in open and closed systems to ensure compliance with specifications. Operate mechanical lifts safely while adhering to personal protective equipment guidelines. Consult with co-workers, supervisors, or engineers when assistance is needed and document repairs and modifications upon job completion. Maintain required certifications, including EPA Universal Refrigerant Technician Certification and Lock Out/Tag Out procedures. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic Qualifications: 3+ years of experience in Commercial/Industrial heating, ventilation and air conditioning (HVAC) field performing trouble shooting, maintaining & repairing equipment Must possess a card from a certifying organization approved by the EPA (Environmental Protection Agency), that shows you to be certified as a Universal technician as required by 40 CFR (Code or Federal Regulations) part 82, Subpart Must be able to complete Fall Protection Training Must be physically able to lift 35 or more pounds during a shift Typical Education & Experience: High school graduate or GED preferred. Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Pay: $41.00/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Feb. 28, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airlines is excited to offer opportunities for a Refrigeration & Air Conditioning Technician to join our Facilities team in Everett, Washington. As a Refrigeration & Air Conditioning Technician, you will have the opportunity to work on a diverse range of HVAC-R equipment, including heating, ventilation, air conditioning, and refrigeration systems. Your expertise will be essential in laying out, constructing, installing, maintaining, and troubleshooting these systems to ensure optimal performance in our plant facilities. You will engage with advanced controls and components, utilizing your skills to read blueprints, make precise adjustments, and perform routine maintenance. Your role will involve collaborating with various teams, diagnosing malfunctions, and implementing effective solutions to enhance system reliability. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities Lay out, construct, install, maintain, and repair HVAC-R equipment, including associated controls and components. Work from blueprints, sketches, and verbal instructions to complete assigned tasks effectively. Utilize testing equipment to read and adjust controls for optimal system performance. Install and adjust valve controls, perform electrical wiring, and set up electronic controls for HVAC-R systems. Troubleshoot, repair, and maintain various types of refrigeration and air conditioning equipment. Conduct routine maintenance on HVAC-R systems according to the Preventative Maintenance schedule. Service HVAC-R equipment in office, commercial, and industrial settings based on service requests. Collaborate with customers, vendors, and engineers to gather information on equipment operations and maintenance history. Monitor system operations using the Energy Management Control System (EMCS) and perform visual inspections for defects. Diagnose malfunctions in mechanical, electrical, plumbing, or electronic systems and develop corrective action plans. Maintain and program moisture control, airflow, and thermal balance to ensure indoor air quality. Install, maintain, and leak test refrigeration systems, adhering to safety practices and refrigerant handling protocols. Assemble and attach refrigeration components using appropriate methods, including soldering and brazing. Perform precision alignment of equipment using tools such as lasers and dial indicators. Monitor and maintain water and chemicals in open and closed systems to ensure compliance with specifications. Operate mechanical lifts safely while adhering to personal protective equipment guidelines. Consult with co-workers, supervisors, or engineers when assistance is needed and document repairs and modifications upon job completion. Maintain required certifications, including EPA Universal Refrigerant Technician Certification and Lock Out/Tag Out procedures. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic Qualifications: 3+ years of experience in Commercial/Industrial heating, ventilation and air conditioning (HVAC) field performing trouble shooting, maintaining & repairing equipment Must possess a card from a certifying organization approved by the EPA (Environmental Protection Agency), that shows you to be certified as a Universal technician as required by 40 CFR (Code or Federal Regulations) part 82, Subpart Must be able to complete Fall Protection Training Must be physically able to lift 35 or more pounds during a shift Preferred Qualifications: Experience working with basic freezer operations systems. Familiarity with the operation chill water and/or glycol chiller systems. Typical Education & Experience: High school graduate or GED preferred. Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Pay: $41.00/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Feb. 28, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Join Us as a PGV Technician - Your Future Starts Here! Pay & Perks You'll Love: $17/hour (Day Shift) | $18/hour (Night Shift) Weekly pay every Friday via direct deposit 2-hour paid break during every 12-hour shift Advancement opportunities and potential for direct hire Enjoy 3-4 days off every week with our unique schedule! Why You'll Love This Role Be part of cutting-edge semiconductor manufacturing in a cleanroom environment Flexible 12-hour shifts give you long weekends every week Work with a team that values safety, quality, and innovation Build a career with growth opportunities in a fast-paced, high-tech setting What You'll Do Assist with setups and wafer movement during eFIT activities Keep your workspace organized and compliant with safety and quality standards Move and load wafers between tools to maintain smooth production flow What Makes You a Great Fit Ability to work one of our four shift options and maintain excellent attendance Strong organizational skills, critical thinking, and problem-solving ability Effective communication skills and basic math knowledge Shift Options S4 Nights: Sun, Mon, Tue + every other Sat S5 Days: Sun, Mon, Tue + every other Wed S6 Nights: Wed, Thu, Fri + every other Sat (6pm-6am) S7 Days: Thu, Fri, Sat + every other Wed (6am-6pm) Work 36 hours one week, 48 the next - with 3-4 consecutive days off! Perfect for vacations, family time, or just relaxing. Ready to Take the Next Step? Apply today and start your journey with Intel! Even if this role isn't the perfect fit, you'll join our talent network for future opportunities. Company Description We connect people to work in ways that enrich their lives!

Job DescriptionDescription: Toyota of Hemet is seeking a highly skilled ASE Master Technician to join our growing, customer-focused service team. This role is ideal for an experienced technician who takes pride in diagnostic excellence, efficiency, and delivering top-tier repairs in a fast-paced dealership environment. As a Master Technician, you will handle advanced diagnostics and complex repairs while serving as a technical leader within the shop. Toyota experience is preferred but not required for the right candidate. What You'll Do Perform advanced diagnostics, troubleshooting, and repairs on Toyota vehicles Diagnose engine, transmission, electrical, hybrid, and drivability concerns Accurately document findings and repair orders Work collaboratively with advisors and fellow technicians Maintain productivity and quality standards Adhere to Toyota and dealership repair procedures and safety standards Mentor and support junior technicians as needed What We Offer Highly competitive flat-rate pay (based on experience and certifications) Consistent work volume Paid training and Toyota factory training opportunities Medical, dental, and vision insurance 401(k) Paid time off and holidays Employee vehicle purchase and service discounts Stable, family-owned dealership environment Requirements:Required Qualifications - ASE Master Designation Current ASE Master Automobile Technician Certification, including: A1 - Engine Repair A2 - Automatic Transmission/Transaxle A3 - Manual Drive Train & Axles A4 - Suspension & Steering A5 - Brakes A6 - Electrical/Electronic Systems A7 - Heating & Air Conditioning A8 - Engine Performance Minimum 3-5 years of professional automotive repair experience Strong diagnostic and problem-solving skills Valid California driver's license with clean driving record Ability to pass background check and drug screening

The Presidio Trust is seeking a Locksmith who will support the Physical Security Department. The Presidio Trust is an innovative federal agency that stewards and shares the history, beauty, and wonder of the Presidio for everyone to enjoy forever. The ancestral homeland of the Ramaytush Ohlone, the Presidio was once a military post under three flags. Today, it is a surprising national park site spanning 1,500 acres at the Golden Gate. Its rare natural habits, inspiring views, and world-class trails are a local and global attraction. It is among the most biologically diverse parks in America and a popular destination with beaches, museums, restaurants, hotels, homes, and offices. Reporting to the Security Supervisor, the Locksmith installs, repairs, rebuilds, and services mechanical or electrical locking devices. The Locksmith contributes to the management and safety of the vast Presidio Trust properties, staff, tenants, and visitors in a clean, safe, compliant, and environmentally conscientious manner This is a full-time position with benefits and a starting at $39.73 per hour, based in the San Francisco Bay Area. This position is included in a bargaining unit, specifically the Laborer s International Union of North America, Local 792, United Public Employees of California. Applications received by January 2, 2026, will receive first consideration. Responsibilities Disassemble locks such as padlocks, safe locks, and door locks, and repairs or replaces worn tumblers, springs, and other parts. Insert new or repaired tumblers into lock to change combination Cut new or duplicate keys Keep records of company locks and keys. Required Qualifications Associate degree (A. A.) or equivalent from two-year college or technical school; or Six (6) months to one (1) year related experience and/or training; or Equivalent combination of education and experience Valid CA Driver s License Must obtain and maintain a CA Locksmith Registration License w/in 6 months of hire Ability to calculate figures and amounts Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Desired Qualifications A passion for the mission and values of the Presidio Trust. Experience working in historic buildings. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to use hands to finger, handle, or feel. The employee is occasionally required to stand, walk, reach with hands and arms, and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts, fumes, or airborne particles, and outside weather conditions. The noise level in the work environment is usually loud. Background Check This position is subject to an employment background check which shall consist of a review of applicable county, state and Federal criminal and civil records, state bankruptcy indexes, driver s license, education, and employment history. An individual s granting of a background check and resulting report is voluntary. However, employment is contingent upon the successful completion of an employment background check. The Presidio Trust may refuse to hire an individual, may rescind an offer of employment to an individual, or may review and terminate the employment of a current employee not successfully completing the background check. The Presidio Trust is an equal opportunity employer, offering a competitive benefits package. To learn more, visit **********************************************

Full-time Description Toyota of Hemet is seeking a highly skilled ASE Master Technician to join our growing, customer-focused service team. This role is ideal for an experienced technician who takes pride in diagnostic excellence, efficiency, and delivering top-tier repairs in a fast-paced dealership environment. As a Master Technician, you will handle advanced diagnostics and complex repairs while serving as a technical leader within the shop. Toyota experience is preferred but not required for the right candidate. What You'll Do Perform advanced diagnostics, troubleshooting, and repairs on Toyota vehicles Diagnose engine, transmission, electrical, hybrid, and drivability concerns Accurately document findings and repair orders Work collaboratively with advisors and fellow technicians Maintain productivity and quality standards Adhere to Toyota and dealership repair procedures and safety standards Mentor and support junior technicians as needed What We Offer Highly competitive flat-rate pay (based on experience and certifications) Consistent work volume Paid training and Toyota factory training opportunities Medical, dental, and vision insurance 401(k) Paid time off and holidays Employee vehicle purchase and service discounts Stable, family-owned dealership environment Requirements Required Qualifications - ASE Master Designation Current ASE Master Automobile Technician Certification, including: A1 - Engine Repair A2 - Automatic Transmission/Transaxle A3 - Manual Drive Train & Axles A4 - Suspension & Steering A5 - Brakes A6 - Electrical/Electronic Systems A7 - Heating & Air Conditioning A8 - Engine Performance Minimum 3-5 years of professional automotive repair experience Strong diagnostic and problem-solving skills Valid California driver's license with clean driving record Ability to pass background check and drug screening Salary Description $90,000- 150,000+ / yr

Job Description Welcome to San Diego International Airport, where our core purpose is to create an exceptional experience for both our community and visitors from around the world. It extends beyond just flights; we embody the vibrant spirit of San Diego itself-sunny, welcoming, and full of life. We are committed to attracting, fostering, and empowering a team of talented individuals who can deliver our strategic goals: Advance Airport Development Transform the Customer Experience Optimize Ongoing Business Cultivate Our Culture Here, culture starts with each of us. Our workplace is shaped by mindsets that guide how we show up for one another: believing the best in people, collaboration, empathy, listening, and thoughtful decision-making. If you are ready to contribute to a team that values meaningful impact and enjoys the journey along the way, we invite you to apply today and help us connect our community to the world. Why You'll Love Working at SAN: Location: Facilities Management Department (FMD) Administration Building, located on San Diego International Airport campus's north end and sits adjacent to the rental car facility, providing one-of-a-kind views of our runway, along with several outdoor terraces and courtyards for employees to engage with nature. Salary: The hiring salary for the HVAC Controls Technician is $34.49 an hour. The full pay range for the HVAC Controls Technician is $34.49 - $40.23 - $46.68. Work performed on 2nd or 3rd shift is eligible for shift differential pay of $2.25 (2nd shift) or $2.50 (3rd shift). Benefits: You will enjoy 14 paid holidays, 18 - 33 days of vacation (PTO), parental and child care benefits, salary continuance for family & parental leave, tuition reimbursement, ensure your future with our retirement plan options including our comprehensive pension plan and 457 defined contribution plan. Plus, take advantage of our annual employer-funded Lifestyle Spending Account, designed to support your personal development and growth activities-and much more! Wellness: Take advantage of multiple on-site gyms with regular fitness classes, outdoor working areas, fitness discounts for all levels and goals, monthly fruit deliveries, rewards for volunteer time, financial wellness advisors, and a campus with easy access to some of San Diego's best walking trails. About the Job: The Facilities Management Department is seeking a skilled HVAC Controls Technician who demonstrates technical proficiency and a commitment to excellence in system optimization and reliability. This opportunity offers the chance to contribute to a dynamic environment where precision and innovation support the comfort and safety of the SAN traveler. This role plays a critical part in maintaining and troubleshooting HVAC systems to ensure peak performance across the San Diego Airport campus. The position calls for journey-level experience, strong mechanical expertise, and creative problem-solving abilities, paired with a keen eye for detail. What You'll Do: Conducts installation, preventive maintenance, inspections, adjustments and repairs of electrical and mechanical problems involving heating, ventilating and air conditioning systems, building automation controls, thermostats, boilers, belts, pumps, filters, valves, motors, fans, pumps, compressors, condensers, chillers, and cooling towers. Operates computer-based building management systems. Coordinates and inspects work performed by contractors engaged in HVAC systems and equipment installation. Maintains and repairs HVAC systems. Operates hand and power tools, vacuum pump, and test equipment. Monitors and operates the airport's central chilled water and heating hot water systems; monitors and responds to HVAC related issues; troubleshoots and solves problems associated with HVAC systems and equipment. Prepares cost estimates and orders materials; maintains records of work plans and logs, interprets and works from sketches, drawings, blueprints and specifications; completes work consistently with relevant codes. Provides work direction and trains other maintenance personnel, assists with cooperative assignments. Operates and drives Authority vehicles, transports equipment to maintain and troubleshoot HVAC systems throughout the Authority campus. Performs other duties as assigned. The Skills You Need: Critical Thinking: Work independently, critically reviews and translates project requirements, data and information to specify solutions or alternative practice in support of business objectives and strategies. Communication & Customer Focus: Proficiently exchange information through multiple opportunities including verbal, digital, written, facilitation of work completion and persuasion. Problem-Solving: Analyzes situation or factor, collaboratively generate alternative and practical solutions, readily adapts behavior or new work methods, evolving and unexpected situations. Leveraging Technology: Effective use of information electronically and related work systems. Requirements The Experience You Need to Have**: High school graduation or GED. Two years of journey-level experience in the heating, ventilation, air-conditioning, and refrigeration trade. Or an equivalent combination of training and experience. Licenses, Certificates, and Special Requirements : Maintain a valid driver's license and the ability to maintain insurability under the Authority's vehicle insurance policy. Successful completion of a fingerprint-based background investigation, training, and testing required for employment and operation of Authority and San Diego County physical security, surveillance, radio, and telecommunications equipment. This position requires availability for rotating shifts and a flexible schedule. Preferred Licenses; Certificates; Special Requirements: Graduation from an HVAC training program, technical school, or related educational program. NATE Certification, HVAC Excellence Certification, or NCI Certification. *Driving is an Essential Function This role requires regular driving as a critical part of performing work-related duties, specifically involving the operation of Airport Authority vehicles. A valid California driver's license is required, along with strict adherence to all traffic laws and safety regulations. Applicants must maintain an acceptable driving record to operate Authority vehicles. Compliance with Airport Authority vehicle use policies, including safety protocols and reporting requirements, is mandatory. Applicants must acknowledge that driving Airport Authority vehicles is an essential function of this role. **Don't meet every requirement? That's okay. At San Diego International Airport, we value your unique experience and your willingness to learn. Some roles require specific qualifications or degrees, but others don't-and we're always open to individuals committed to growth and excellence. If this sounds like you, we encourage you to apply. And if it's not the right fit, we'll keep you in mind for future opportunities. We may have the perfect spot for you to land. EEO Statement It is the policy of the San Diego County Regional Airport Authority to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. In addition, SDCRAA will provide reasonable accommodations for qualified individuals with disabilities. Physical & Mental Demands Persons with disabilities may be able to perform the essential duties of this class with reasonable accommodation. Reasonable accommodation will be evaluated on an individual basis and depends, in part, on the specific requirements for the job, the limitations related to disability and the ability of the hiring department to accommodate the limitation. If you need any form of accommodation during the recruitment process, please inform the Talent Acquisition Partner (Recruiter). Under California Government Code Sections 3100 - 3109, public employees are designated disaster service workers. The term "public employees" includes all persons employed by the state or any county, city, state agency, or public district. Disaster service workers are required to participate in such disaster service activities as they may be assigned to them by their employer or law.

Welcome to San Diego International Airport, where our core purpose is to create an exceptional experience for both our community and visitors from around the world. It extends beyond just flights; we embody the vibrant spirit of San Diego itself-sunny, welcoming, and full of life. We are committed to attracting, fostering, and empowering a team of talented individuals who can deliver our strategic goals: Advance Airport Development Transform the Customer Experience Optimize Ongoing Business Cultivate Our Culture Here, culture starts with each of us. Our workplace is shaped by mindsets that guide how we show up for one another: believing the best in people, collaboration, empathy, listening, and thoughtful decision-making. If you are ready to contribute to a team that values meaningful impact and enjoys the journey along the way, we invite you to apply today and help us connect our community to the world. Why You'll Love Working at SAN: Location: Facilities Management Department (FMD) Administration Building, located on San Diego International Airport campus's north end and sits adjacent to the rental car facility, providing one-of-a-kind views of our runway, along with several outdoor terraces and courtyards for employees to engage with nature. Salary: The hiring salary for the HVAC Controls Technician is $34.49 an hour. The full pay range for the HVAC Controls Technician is $34.49 - $40.23 - $46.68. Work performed on 2nd or 3rd shift is eligible for shift differential pay of $2.25 (2nd shift) or $2.50 (3rd shift). Benefits: You will enjoy 14 paid holidays, 18 - 33 days of vacation (PTO), parental and child care benefits, salary continuance for family & parental leave, tuition reimbursement, ensure your future with our retirement plan options including our comprehensive pension plan and 457 defined contribution plan. Plus, take advantage of our annual employer-funded Lifestyle Spending Account, designed to support your personal development and growth activities-and much more! Wellness: Take advantage of multiple on-site gyms with regular fitness classes, outdoor working areas, fitness discounts for all levels and goals, monthly fruit deliveries, rewards for volunteer time, financial wellness advisors, and a campus with easy access to some of San Diego's best walking trails. About the Job: The Facilities Management Department is seeking a skilled HVAC Controls Technician who demonstrates technical proficiency and a commitment to excellence in system optimization and reliability. This opportunity offers the chance to contribute to a dynamic environment where precision and innovation support the comfort and safety of the SAN traveler. This role plays a critical part in maintaining and troubleshooting HVAC systems to ensure peak performance across the San Diego Airport campus. The position calls for journey-level experience, strong mechanical expertise, and creative problem-solving abilities, paired with a keen eye for detail. What You'll Do: Conducts installation, preventive maintenance, inspections, adjustments and repairs of electrical and mechanical problems involving heating, ventilating and air conditioning systems, building automation controls, thermostats, boilers, belts, pumps, filters, valves, motors, fans, pumps, compressors, condensers, chillers, and cooling towers. Operates computer-based building management systems. Coordinates and inspects work performed by contractors engaged in HVAC systems and equipment installation. Maintains and repairs HVAC systems. Operates hand and power tools, vacuum pump, and test equipment. Monitors and operates the airport's central chilled water and heating hot water systems; monitors and responds to HVAC related issues; troubleshoots and solves problems associated with HVAC systems and equipment. Prepares cost estimates and orders materials; maintains records of work plans and logs, interprets and works from sketches, drawings, blueprints and specifications; completes work consistently with relevant codes. Provides work direction and trains other maintenance personnel, assists with cooperative assignments. Operates and drives Authority vehicles, transports equipment to maintain and troubleshoot HVAC systems throughout the Authority campus. Performs other duties as assigned. The Skills You Need: Critical Thinking: Work independently, critically reviews and translates project requirements, data and information to specify solutions or alternative practice in support of business objectives and strategies. Communication & Customer Focus: Proficiently exchange information through multiple opportunities including verbal, digital, written, facilitation of work completion and persuasion. Problem-Solving: Analyzes situation or factor, collaboratively generate alternative and practical solutions, readily adapts behavior or new work methods, evolving and unexpected situations. Leveraging Technology: Effective use of information electronically and related work systems. Requirements The Experience You Need to Have**: High school graduation or GED. Two years of journey-level experience in the heating, ventilation, air-conditioning, and refrigeration trade. Or an equivalent combination of training and experience. Licenses, Certificates, and Special Requirements : Maintain a valid driver's license and the ability to maintain insurability under the Authority's vehicle insurance policy. Successful completion of a fingerprint-based background investigation, training, and testing required for employment and operation of Authority and San Diego County physical security, surveillance, radio, and telecommunications equipment. This position requires availability for rotating shifts and a flexible schedule. Preferred Licenses; Certificates; Special Requirements: Graduation from an HVAC training program, technical school, or related educational program. NATE Certification, HVAC Excellence Certification, or NCI Certification. *Driving is an Essential Function This role requires regular driving as a critical part of performing work-related duties, specifically involving the operation of Airport Authority vehicles. A valid California driver's license is required, along with strict adherence to all traffic laws and safety regulations. Applicants must maintain an acceptable driving record to operate Authority vehicles. Compliance with Airport Authority vehicle use policies, including safety protocols and reporting requirements, is mandatory. Applicants must acknowledge that driving Airport Authority vehicles is an essential function of this role. **Don't meet every requirement? That's okay. At San Diego International Airport, we value your unique experience and your willingness to learn. Some roles require specific qualifications or degrees, but others don't-and we're always open to individuals committed to growth and excellence. If this sounds like you, we encourage you to apply. And if it's not the right fit, we'll keep you in mind for future opportunities. We may have the perfect spot for you to land. EEO Statement It is the policy of the San Diego County Regional Airport Authority to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. In addition, SDCRAA will provide reasonable accommodations for qualified individuals with disabilities. Physical & Mental Demands Persons with disabilities may be able to perform the essential duties of this class with reasonable accommodation. Reasonable accommodation will be evaluated on an individual basis and depends, in part, on the specific requirements for the job, the limitations related to disability and the ability of the hiring department to accommodate the limitation. If you need any form of accommodation during the recruitment process, please inform the Talent Acquisition Partner (Recruiter). Under California Government Code Sections 3100 - 3109, public employees are designated disaster service workers. The term "public employees" includes all persons employed by the state or any county, city, state agency, or public district. Disaster service workers are required to participate in such disaster service activities as they may be assigned to them by their employer or law.

Join our Team and receive Great Pay and Great Benefits while performing exciting and interesting work! Bay Ship & Yacht Co., is a modern shipyard located on the waterfront of San Francisco Bay. We provide dry-docking and repair services to commercial and government vessels, including tugboats, ferries, Coast Guard cutters, cruise ships, pilot boats, yachts, and marine vessels of all kinds. We are growing and we're looking for motivated new members to add to our team. So, if you're looking for interesting work where you can learn something new every day, grow personally and professionally, then this could be the right opportunity for you. For over 30 years we have been regarded as one of the West Coast's premiere shipyards. Bay Ship & Yacht Co. is seeking an experienced Valve Technician to join our team. Minimum Qualifications: Must have minimum 3 years' Industrial plumbing experience identifying various valves, removing, disassembling, evaluating (inspecting), overhauling, lapping, blue-fitting, reassembling, testing and installing. Good mechanical aptitude. Must be able to communicate, write and read specifications and provide written, verbal and detailed findings for repairs, overhauls or replacement of particular valves. Must be able to work in confined spaces, voids, ladders, high spaces, limited space work areas. Must be willing to climb and descend ladders, climb into limited access spaces. Must have some rigging experience and be able to manually lift 50 lbs. Must follow specific directions and have understand piping systems and its working properties. Must provide own hand tools and associated craft tools. Must be competent using power tools such as grinder, bandsaws, drills, impacts and other craft power tools. It should be noted that we strive to ensure the success of our employees. We actively promote from within, and we provide strong career growth potential. We offer excellent benefits that include paid vacations and holidays, a 401(k) profit-sharing plan, and health, dental, and life insurance. The pay range is $25-$36 per hour DOE. This job posting is for local SF Bay Area applicants, no relocation is being offered for this position. Pre-Employment Medical Evaluation, Physical Abilities Testing, & Drug Testing Bay Ship & Yacht Co. is a U.S. Federal Contractor and is required to operate in compliance with current government standards and regulations. Employment is contingent upon successful completion of a pre-employment medical evaluation at the company's designated testing facility. The medical evaluation will include a physical exam, physical abilities test and drug test for the presence of illegal substances including marijuana as it applies to the U.S. Federal Contractors, as well as a background/criminal check. If you believe that you will not pass the medical evaluation & required drug testing, you should withdraw your application now.

Job Description Founded in 1980, Hillsboro Aviation offers complete helicopter and airplane services comprised of five divisions: contract & charter, aircraft sales & management, service center, FBO, and parts sales. Serving domestic and international markets in the government, commercial, and private sectors, we proudly employ 75 talented individuals and operate 10 turbine aircraft out of our award-winning headquarters at the Portland-Hillsboro Airport (KHIO). Our Mission We believe in redefining the aviation experience. It's about the extraordinary moments. It's about empowering our team, our customers, and the community to make their mark. It's about embodying a relationship-first philosophy. It's about seizing opportunities to listen, learn, and make a positive impact. It's about integrity and doing the right thing. The Position As an FAA Certified Part 145 Repair Station, Hillsboro Aviation provides comprehensive maintenance and avionics services for a wide array of aircraft. From privately owned airplanes and helicopters to fixed and rotor-wing fleet operators; our clientele encompasses private, commercial, and government sectors. Our full-service facility in Hillsboro, Oregon supports scheduled and unscheduled maintenance, modifications and upgrades, avionics, and AOG emergencies. Our factory-trained mechanics and avionics technicians boast an average of over 20 years of experience. As a Senior Service Center Mechanic, you will report to the Service Center Manager and will be responsible for leading maintenance projects and performing maintenance functions on jet, turboprop, turbine helicopter and high-performance piston aircraft. Ideal candidates are engaging, energetic, and driven. We are looking for someone who can work independently within their areas of responsibilities under limited supervision. The right candidate also values a strong work ethic and optimistic attitude while maintaining a critical eye for detail and organization. The work schedule is Monday through Friday from 8:00am to 5:00pm. We require overtime during the week and on weekends when it is necessary to maintain our commitments and keep the shop's schedule in balance. Job Responsibilities Supporting the Service Center Manager in execution of responsibilities as defined in Hillsboro Aviation's Repair Station Manual (RSM). Supporting the maintenance quality, efficiency, and regulatory compliance on all customer aircraft. Ensuring aircraft are maintained in accordance with the approved aircraft inspection program. Ensuring airworthiness and availability of assigned customer aircraft. Coordinating maintenance logistics to minimize downtime and maximize aircraft availability. Maintaining a high standard of quality for the shop environment, tools, and records. Other duties as assigned. Qualifications/Licenses FAA A&P Certificates 10+ years maintaining turboprops, jets, and/or turbine helicopters in a GA setting Required Skills/Experience Clean record/history with FAA and primary customer base Preferred Skills/Experience FAA Inspection Authorization Experience maintaining HondaJets Experience maintaining Citations Experience maintaining King Airs Experience maintaining Caravans Experience maintaining Airbus helicopters Experience maintaining Bell helicopters Factory training for any of the aforementioned aircraft Experience with major repairs & alterations Experience with non-routine and complex maintenance tasks Avionics experience Benefits Competitive salary Paid vacation, sick days, and holidays Medical, dental, and vision 401K An opportunity to live and work in the beautiful Pacific Northwest Hillsboro Aviation's growth and sustainability is rooted in its commitment to attracting a diverse set of talent from around the world. To that end, we encourage qualified individuals from all walks of life to apply. We are an equal opportunity employer (EEO) and do not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. This job will remain open until filled. Please do not call regarding the status of your application.

Be part of the future! We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people - you bring your talent, and we'll give you the space and opportunities to grow and succeed. We are committed to make a difference. What we offer: Competitive Starting Pay Paid Training Global Advancement Opportunities Company Vehicle (as applicable) Referral Bonuses Comprehensive Benefits Medical/Dental/Vision insurance Health Savings Account (HSA) Life Insurance 401(k) savings plan with company match Short-Term and Long-Term Disability Employee Assistance Program Wellness Program And More! Please note: This position will focus on the Brookings, SD area, and the selected technician is expected to reside in or relocate to Brookings, SD. What you will do Perform HVAC Control systems programming, troubleshooting, installation, commissioning and preventative maintenance as it is related to mechanical, electrical, and low voltage controls components. Respond to service and warranty calls using Johnson Controls configuration and commissioning tools as well as a variety of hand tools including electrical testing meters and other electronic testing equipment. Provide front line technical and repair support through effective communications with Johnson Controls customers. Provide system repair and or update recommendations and assist in proposing of recommendations to Johnson Controls customers. Be part of an expanding team of the best technicians in the industry while you build career with a first class global organization. Provide our customers with the highest level of service to solve building inefficiencies and resolve service related items. As a trusted advisor to our customers you will provide solutions and outcomes at the time of service How you will do it Loading Johnson Controls field and network level controller software. Performing commissioning and system diagnostics for all levels of system controllers as well as end devices (i.e. Sensors, actuators, etc.) and complete all required commissioning documentation. Keeps management and JCI contractor or customer informed of job progress and issues. Calibrates systems requiring basic electronic test equipment. Completes administrative tasks including but not limited to time sheets, expense reports, and on-site documentation. Documents changes and provides information for as-built documentation. Execute company sponsored as well as personally initiated training to insure the highest level of knowledge and capability are maintained Engage with customers to fully understand their systems and needs. Communicates with the JCI contractor or customer upon arrival and before leaving the work site. Follows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions. What we look for Required Vocational School four year program or an Associate degree in electronics, mechanical systems, computer technology, air conditioning or similar field plus three years of industry experience or 2+ years experience in servicing electronic and/or mechanical systems in the HVAC industry. Strong understanding of HVAC systems, sequence and applications Demonstrated technical aptitude in mechanical and electro-mechanical fields Able to use hand, power tools and electrical testing equipment such as a multi meter. Solid knowledge base in use of personal computers. Attention to detail. Good communication and listening skills. HIRING HOURLY RANGE: $19.00-$25.00 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. The posted salary range reflects the target compensation for this role. However, we recognize that exceptional candidates may bring unique skills and experiences that exceed the typical profile. If you believe your background warrants consideration beyond the stated range, we encourage you to apply. To support an efficient and fair hiring process, we may use technology assisted tools, including artificial intelligence (AI), to help identify and evaluate candidates. All hiring decisions are ultimately made by human reviewers. For details, please visit the About Us tab on the Johnson Controls Careers site at ***************************************** #TechHiring Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Build your best future with the Johnson Controls team As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support many industries worldwide. You will have the opportunity to develop yourself through meaningful service work and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard - your next great opportunity is just a few clicks away! What we offer Competitive salary Paid vacation/holidays/sick time Comprehensive benefits package including 401K, medical, dental, and vision care Encouraging and collaborative team environment Dedication to safety through our Zero Harm policy Check us out!: ******************* ZMNrDJviY What you will do Perform HVAC Control systems troubleshooting, installation, commissioning and preventative maintenance as it is related to mechanical, electrical, and low voltage controls components. Respond to service and warranty calls using Johnson Controls configuration and commissioning tools as well as a variety of hand tools including electrical testing meters and other electronic testing equipment. Provide front line technical and repair support through effective communications with Johnson Controls customers. Provide system repair and or update recommendations and assist in proposing recommendations to Johnson Controls customers. Be part of an expanding team of the best technicians in the industry while you build a career with a first-class global organization. Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of service How you will do it Be a dedicated member of a North America Branch team willing to learn and be responsible for system trouble shooting, repair and aftermarket services for this fast-growing business. Experienced in electrical and electronics troubleshooting. Loading Johnson Controls field and network level controller software. Performing commissioning and system diagnostics for all levels of system controllers as well as end devices (i.e. Sensors, actuators, etc.) and complete all required commissioning documentation. Keeps management and JCI contractor or customer informed of job progress and issues. Calibrates systems requiring basic electronic test equipment. Completes administrative tasks including time sheets, expense reports, and on-site documentation. Documents change and provide information for as-built documentation. Execute company sponsored as well as personally initiated training to ensure the highest level of knowledge and capability are maintained Engage with customers to fully understand their systems and needs. Communicates with the JCI contractor or customer upon arrival and before leaving the work site. Follows all safety standards and attends required safety training. High degree of employee and subcontractor safety. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions. What we look for Required Vocational School program or an associate degree in electronics, mechanical systems, computer technology, air conditioning or similar field plus three years of industry experience in servicing electrical, electronic and/or mechanical systems in the HVAC industry. Understanding of HVAC systems, sequence and applications Demonstrated technical aptitude in mechanical and electro-mechanical fields Able to use hand, power tools and electrical testing equipment such as a multi meter. Solid knowledge base in use of personal computers. Attention to detail. Good communication and listening skills. Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Job Description We are seeking a skilled and dedicated Forklift Technician to join our team in Phoenix, AZ. In this role, you will play a crucial part in ensuring the safe and efficient operation of our forklift and heavy equipment fleet. If you have a passion for mechanics and a knack for problem-solving, we want to hear from you! This is NOT a forklift operator position. This is a Forklift Mechanic role focused on repair and maintenance. Key Responsibilities: Perform routine maintenance and repairs on various types of forklifts and heavy equipment (gas, diesel, and electric). Troubleshoot and diagnose mechanical, electrical, and hydraulic issues to ensure optimal equipment performance and safety. Conduct inspections and tests to proactively identify potential issues before they escalate. Maintain accurate and timely records of repairs, parts used, and maintenance activities. Respond to service calls for both shop and field repairs. Collaborate with team members to improve equipment reliability and reduce downtime. Stay current with industry trends and advancements in forklift and material handling technology. Follow all OSHA safety standards and company policies while maintaining a clean and organized workspace. Qualifications: High school diploma or equivalent required; technical or vocational certification in mechanics preferred. 2+ years of experience as a forklift mechanic or heavy equipment technician. Strong understanding of mechanical, electrical, and hydraulic systems. Ability to read and interpret technical manuals, wiring diagrams, and schematics. Excellent problem-solving skills, attention to detail, and organizational abilities. Capable of working independently as well as part of a team. Valid driver's license and clean driving record (company vehicles may be provided for field work). Ability to pass background and drug screening Must supply own tools (preferred) Preferred Qualifications: OEM certifications (Toyota, Hyster, Crown, etc.) ASE or equivalent mechanical certifications Bilingual (English/Spanish) is a plus What We Offer: Health, dental, and vision insurance Life insurance and disability insurance Paid time off, holidays, and 401(k) Opportunities for advancement and ongoing training Company vehicle and mobile phone for field service techs Work boot allowance and uniforms Ready to bring your skills to a team that values your expertise? Apply now and become a key part of our growing operation You should be proficient in: Heavy Equipment Repair Mechanical Troubleshooting Skills