Technical design engineer full time jobs

Job DescriptionDescriptionWe are an Ohio based mechanical and electrical consulting engineering firm with offices in North Royalton and Columbus established in 1993. We are seeking a full-time mechanical engineer or mechanical designer with at least 3 years of experience to support the growth and expansion of our business. The position would start as a "mechanical engineer/designer" and potentially progress over time to "project manager” or “project engineer." Key ResponsibilitiesPosition will involve HVAC and Plumbing system design, design computations including loads, air and piping distribution and sizing, equipment selection, specification preparation, field work (both design investigation and construction observation), design review and correspondence with clients, colleagues, owners, and contractors. • Preparation of design layouts for commercial and industrial mechanical systems based on specific design objectives. • Preparation of schematics for various systems. • Collaboration with all disciplines to achieve completed coordinated design and reviewing the work of others. • Performance of on-site investigation to confirm existing conditions. • Developing familiarity with current mechanical codes and standards. • Forming relationships with equal level personnel of other disciplines (architectural, electrical, structural civil, etc.) and manufacturing sales representatives. • Becoming familiar with and preparing general and mechanical specifications. Skills, Knowledge and Expertise• Must have consultative mechanical engineering experience. Interpersonal skills to work effectively with others. • Familiarity with system specific materials, components, and systems. • Basic knowledge of high mathematics relative to the work. • Oral and written communications skills. • Analytical ability to solve complex problems. • Working ability/knowledge of AutoCad. • Working ability/knowledge of REVIT is not required, but desired. Benefits We operate an open and collaborative space that allows for an environment where ideas are freely exchanged, solutions are created, and proposals become reality. Even though the pace is fast, we do what we can to maintain a respectful, cooperative spirit throughout the office that considers schedules, work habits, personal priorities, and “space”. Additional benefits include the following: • 401(k) with Safe Harbor contribution of 3% of salary • Full coverage of Health insurance in Medical Mutual SuperMed PPO Network • Paid time off including vacations and holidays.

We are looking to fill a full time ENTRY LEVEL Mechanical Engineer position with a manufacturer located in the area of Franklin/Bowling Green, KY. Salary Range: $70,000 per year. No relocation assistance for entry level candidates. Must Haves: · BS Degree in Mechanical Engineering is required to apply. Will not accept Mech. Engr. Technology degree · Must be able to commute or relocate at your own expense. Essential Duties and Responsibilities: · Evaluate and manage capital and kaizen projects in a time-critical environment. · Provide analysis, evaluation and review of problems regarding automation, advanced methods and equipment, material handling, layout and material flow. · Provide alternative solutions to anticipated or actual technical and/or business related manufacturing problems. · Develop safeguards and improve team member safety through process improvements. · Provide training to production and maintenance team members. · Provide trouble shooting assistance to production and maintenance team members. · Develop new equipment specifications, tooling and other associated requirements. · Design new equipment or redesign existing equipment, and coordinate its fabrication, assembly, installation, and startup as needed. · Provide daily leadership to hourly maintenance personnel · Maintain all mechanical functions of plant processes · Actively and aggressively support 6S policies and procedures · Support the Production Dept. to assure processes, fixtures, inspection gauges, and tooling are designed, manufactured and delivered on time and within budget to meet production demands. · Prepare equipment and/or tooling designs as required to meet production needs. · Collect data from production documents daily or as needed. · Compare collected data to the standards and analyze for improvements. · Compare the collected data to production reports and analyze discrepancies. · Organize and report data weekly/monthly/yearly. · Measure OEE (Operating Equipment Efficiency) as required. · Identify and quantify opportunities for improvements. · Recommend and implement improvements. · Respond to emergency failures as needed. · Actively support 6S policies and practices. · Support new equipment installations as required and develop spare parts lists. · Coordinate forklift and company vehicle maintenance. · Support the Maintenance Dept. and Supervisor to assure the maintenance systems are being followed properly. · Develop new and/or improve maintenance systems. · Assist with budget preparations for production and maintenance by identifying equipment and tooling needs and developing cost estimates. · Collect maintenance related data from the documents daily. · 3D modeling experience (Solidworks) Preferred · Design tooling and verify line startup for new part numbers and capabilities · Communicate with sales and product design team · Develop new products from initial quoting through production lifespan Education and Work Experience Requirements: · B.S. Degree in Mechanical Engineering · Thorough knowledge of machine design, Solidworks, tooling, machine installation & developing PFEMA. · Microsoft office skills · Training or working knowledge of statistical analysis processes · Ability to interpret data and engineering drawings · Must have strong organizational and time management skills · Must have good verbal and written communication and team building skills · Must have strong problem solving skills · Strong work ethic · TPS · TPM · 5S · Autonomous Maintenance · Root Cause Analysis · Cost justification analysis · SolidWorks · Continuous improvement techniques · Pokayoke

Description Job Title: Senior Design Engineer - Precision Machinery Design Location: Indianapolis, IN - onsite only Full-Time, direct hire (not a contract role) Looking for a place that is 24% to 52% LESS expensive to live with a great quality of life? Our client is seeking an experienced Senior Design Engineer with a background in designing high-precision, moving machinery to join their team. This role requires deep expertise in mechanical systems, linear actuators, motion control, and high-precision tooling. The ideal candidate will have a proven track record of designing CNC machines, machining centers, or other high-accuracy mechanical systems. Key Responsibilities: Lead mechanical design projects for complex, high-precision equipment, including motion control systems, material handling components, and structural assemblies. Develop and optimize designs for moving mechanical systems, with a focus on linear and rotary motion precision, thermal stability, and vibration damping. Collaborate with electrical and software engineers to integrate mechanical and control systems seamlessly. Oversee the design and specification of components such as servo motors, ball screws, linear rails, bearings, and actuators. Conduct design validation through FEA (Finite Element Analysis), tolerance stack-up analysis, and prototyping. Ensure all designs meet relevant industry standards for precision manufacturing and safety. Work with suppliers and manufacturing partners to source custom and off-the-shelf components and ensure high-quality builds. Drive continuous improvement initiatives in machine reliability, repeatability, and performance. Qualifications Bachelor's or Master's degree in Mechanical Engineering, Mechatronics, or a related field. 10+ years of experience in designing precision machinery, such as CNC machines, machining tools, or automated production equipment. Strong expertise in motion control systems, precision assemblies, and the design of moving mechanical systems. Proficiency in 3D CAD software (e.g., SolidWorks, Creo, or NX. NX Preferred)). Experience with GD&T (Geometric Dimensioning & Tolerancing) and precision manufacturing processes. Familiarity with servo motors, ball screws, and linear motion control technologies. Excellent problem-solving, communication, and project management skills. Why Join the team? Work on cutting-edge projects that push the boundaries of precision manufacturing. Collaborate with industry leaders in aerospace and advanced manufacturing. Competitive salary and benefits, including equity opportunities. Be part of a fast-growing company shaping the future of metal 3D printing. What the company is offering: Compensation depending on experience; $130k to $170k Bonus or equity Full medical, dental, and vision 100% paid by the company for employees and their families. Paid time off 9 holidays Sound interesting? Send your resume to [email protected]

What if you were given the opportunity and responsibility to make a difference? At International Paper, you control your destiny. We offer challenging assignments and total rewards in countries around the world. When we say infinite possibilities, we mean it. Apply now and join a community that improves people's lives, the planet and our company's performance by transforming renewable resources into products people depend on every day. **Project Engineer - Packaging Solutions North America (PSNA) Engineering** **Position Title:** Project Engineer **Pay Rate: $115,000 - $134,000** _Multiple factors, including Individual experience, skills and abilities will determine where an employee is ultimately placed in the pay range._ **Category/Shift:** Salaried Full-Time **Physical Location:** Memphis TN. Does not require relocation to Memphis. Must live near an US airport as this position requires approximately 50% travel. **The Job You Will Perform:** + Responsible for engineering and managing the installation of equipment within corrugated manufacturing facilities. + Directly responsible to assure all capital and repair projects assigned are installed as per the project scope, schedule, cost estimate and budget, and with minimum plant production interference. + Reports to the Project Engineer Lead in PSNA Engineering. The PL of this role may vary (PL 14, 15 or 16) according to candidate skill set and experience. + Lead the project management of multiple, concurrent projects involving installation of corrugated manufacturing equipment and/or plant infrastructure improvements. + Project management responsibilities include organizing/planning, scoping & bidding, coordination of schedule, and managing the project to fruition. + Perform detailed engineering for installation of corrugated manufacturing equipment and/or plant infrastructure improvements. + Travel to sites as needed to manage major and minor projects & equipment installations. + Act as the subject matter expert and discussion partner to Packaging Solutions North America (PSNA) facilities on all aspects of the corrugated manufacturing process, and project implementation. **The Qualifications, Skills and Knowledge You Will Bring:** + BS degree or equivalent experience in engineering or related business discipline. + 5+ years corrugated box industry experience including a detailed understanding of corrugated equipment, the corrugating process and applicable OSHA health & safety policies/laws. + Requires understanding of engineering process and the mechanical, electrical, and scheduling/organizational requirements for corrugated equipment installations. + Proficiency in Microsoft Office Suite, including Microsoft Project. + Proficiency with AutoCAD software to create, view and modify drawings for comparative evaluation and final project construction/installation; utilize AutoCAD software to create and modify plant layouts, equipment layouts & foundation drawings for contractor bid packages. + Advanced project management skills with experience managing multiple, current, major and minor engineering projects. + Ability to communicate technical concepts effectively to all levels of company management. + Knowledge and understanding of contractor services - mechanical, electrical, and structural. + Organizing + Time Management + Priority Setting + Action Oriented + Decision Quality + Problem Solving + Functional /Technical **The Benefits You Will Enjoy:** International Paper offers a benefits package that includes health, welfare and retirement plans including Medical, Dental, Life insurance, Flexible Spending Accounts, Short-term and Long-term Disability, 401(k), Company-funded retirement contributions, Paid Time Off, Education & Development (including Tuition Reimbursement), Student Loan Repayment Assistance, and Voluntary Benefits including insurance for home, auto, vision and pets. **The Career You Will Build:** Sales and Leadership training, promotional opportunities within a global company **The Impact You Will Make:** We continue to build a better future for people, the planet, and our company! IP has been a good steward of sustainable practices across communities around the world for more than 125 years. Join our team and you'll see why our team members say they're **Proud to be IP** . **The Culture You Will Experience:** International Paper promotes employee well-being by providing safe, caring and inclusive workplaces. We have team members all around the world with diverse backgrounds, experiences, and perspectives. These are our strengths. We are committed to creating a culture where all individuals are respected, valued, engaged and have an opportunity to do their best work every day. We invite you to bring your uniqueness, creativity, talents, experiences, and safety mindset to be a part of our increasingly inclusive and diverse culture. **The Company You Will Join:** International Paper (NYSE: IP) is the global leader in sustainable packaging solutions. With company headquarters in Memphis, Tennessee, USA, and EMEA (Europe, Middle East and Africa) headquarters in London, UK, we employ more than 65,000 team members and serve customers around the world with operations in more than 30 countries. Together with our customers, we make the world safer and more productive, one sustainable packaging solution at a time. Net sales for 2024 were $18.6 billion. In 2025, International Paper acquired DS Smith creating an industry leader focused on the attractive and growing North American and EMEA regions. Additional information can be found by visiting internationalpaper.com International Paper is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. International Paper complies with federal and state disability laws and makes reasonable accommodations for applicants and employees with disabilities. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact reasonable.accommodations@ipaper.com or **************. Memphis TN 38197 Share this job: Location: STATE WIDE, AL, US, #STATE WIDE, NC, US, #STATE WIDE, NM, US, #STATE WIDE, TN, US, #STATE WIDE, MS, US, #STATE WIDE, NV, US, #STATE WIDE, OR, US, #STATE WIDE, CA, US, #STATE WIDE, GA, US, #STATE WIDE, MA, US, #STATE WIDE, LA, US, #STATE WIDE, NJ, US, #STATE WIDE, UT, US, #STATE WIDE, AR, US, #STATE WIDE, MD, US, #STATE WIDE, IA, US, #STATE WIDE, VA, US, #STATE WIDE, TX, US, #STATE WIDE, AZ, US, #STATE WIDE, MI, US, #STATE WIDE, MO, US, #STATE WIDE, KS, US, #STATE WIDE, PA, US, #STATE WIDE, NE, US, #STATE WIDE, CT, US, #STATE WIDE, SD, US, #STATEWIDE, VT, US, #STATE WIDE, MN, US, #STATE WIDE, NH, US, #STATE WIDE, IL, US, #STATE WIDE, CO, US, #STATE WIDE, NY, US, #STATE WIDE, ME, US, #STATE WIDE, WI, US, #STATE WIDE, OH, US, #STATE WIDE, FL, US, #STATE WIDE, RI, US, #STATE WIDE, SC, US, #STATE WIDE, KY, US, #STATE WIDE, OK, US, #STATE WIDE, IN, US, #STATE WIDE, WA, US, # Category: Manufacturing Date: Nov 20, 2025 If you are not finding suitable opportunities, please click below to join our talent community!

***************** is planning to bring a million developers and a billion users onchain. We need your help to make that happen. We believe that the onchain platform is the most important builder platform since the internet ("online"). We believe that the onchain platform should be open source, free to use, and globally available. And we believe that in order to make it really work, we need all hands on deck, working together to scale in a secure, decentralized, easy-to-use way. Base is incubated within Coinbase and plans to progressively decentralize in the years ahead. We believe that decentralization is critical to creating an open, global crypto economy that is accessible to everyone. Base is built on Optimism's open-source OP Stack. We're joining as the second Core Dev team working on the OP Stack to ensure it's a public good available to everyone; and contributing a portion of sequencer revenue to funding public goods. We are looking for a strong *Smart Contract Engineer* to join the Base team to help us continue scaling in order to pave the way for billions of people coming onchain. *What you'll do*: * Architect and build secure smart contract protocols and backend services to connect Coinbase users with the crypto ecosystem * Drive standardization in crypto protocols by designing and defining interfaces * Work closely with the Base leadership and product team to set our onchain strategy and roadmaps * Mentor and train other team members on smart contract engineering best practices *What we look for in you*: * 2+ year Experience with Solidity and smart contract development * 3+ year Experience with backend/client side development * Deep understanding of smart contract best practices and current industry patterns * Extensive experience with crypto (Ethereum, DeFi etc.) * Interest and passion for contributing to the crypto ecosystem * Interest and passion for building secure, robust, scalable infrastructure *Nice to haves*: * Experience with Go * Experience with zero-knowledge technology * Contributions to open source crypto projects * Crypto-forward experience, including familiarity with onchain activity such as interacting with Ethereum addresses, using ENS, and engaging with dApps or blockchain-based services. Job #: GBSCE05US *Answers to crypto-related questions may be used to evaluate your onchain experience *Pay Transparency Notice:* Depending on your work location, the target annual salary for this position can range as detailed below. Full time offers from Coinbase also include bonus eligibility**+ benefits (including medical, dental, vision and 401(k)). Pay Range: $186,065-$218,900 USD Please be advised that each candidate may submit a maximum of four applications within any 30-day period. We encourage you to carefully evaluate how your skills and interests align with Coinbase's roles before applying. Commitment to Equal Opportunity Coinbase is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, creed, gender, national origin, age, disability, veteran status, sex, gender expression or identity, sexual orientation or any other basis protected by applicable law. Coinbase will also consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state and local law. For US applicants, you may view the *********************************************** in certain locations, as required by law. Coinbase is also committed to providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact us at accommodations*********************************** Global Data Privacy Notice for Job Candidates and Applicants Depending on your location, the General Data Protection Regulation (GDPR) and California Consumer Privacy Act (CCPA) may regulate the way we manage the data of job applicants. Our full notice outlining how data will be processed as part of the application procedure for applicable locations is available **************************************************************** AI Disclosure For select roles, Coinbase is piloting an AI tool based on machine learning technologies to conduct initial screening interviews to qualified applicants. The tool simulates realistic interview scenarios and engages in dynamic conversation. A human recruiter will review your interview responses, provided in the form of a voice recording and/or transcript, to assess them against the qualifications and characteristics outlined in the job description. For select roles, Coinbase is also piloting an AI interview intelligence platform to transcribe and summarize interview notes, allowing our interviewers to fully focus on you as the candidate. *The above pilots are for testing purposes and Coinbase will not use AI to make decisions impacting employment*. To request a reasonable accommodation due to disability, please contact accommodations[at]coinbase.com.

Job Title: Design Engineer Employment Type: Full-Time Department: Engineering Axionova Engineering Limited is an established leader in the civil engineering industry, recognized for delivering innovative and reliable solutions across multiple sectors. Our team is driven by a commitment to excellence and a passion for designing systems that address complex challenges. We are excited to invite a Design Engineer to join our forward-thinking team to contribute to our ambitious projects and high standards of quality and efficiency Position Overview: Axionova Engineering Limited is seeking a knowledgeable and detail-oriented Design Engineer to join our engineering team. The ideal candidate will have a strong foundation in engineering, with a specialization in system design and process improvement. This role focuses on evaluating and optimizing our systems and equipment, designing new processes, and ensuring that engineering projects meet our standards for quality, cost-effectiveness, and functionality. Key Responsibilities: - System and Process Analysis: Review and assess existing systems and processes, identifying areas for improvement and recommending streamlining opportunities. - Equipment and Process Design: Evaluate current equipment and design new processes or systems that meet Axionovas needs in terms of output, cost, and quality. - Cost Reduction: Make informed recommendations on new systems or designs that could help reduce production and operational costs. - Project Collaboration: Partner with the engineering team to bring designs to fruition, ensuring that equipment and processes align with project requirements. - Project Management: Oversee installation projects, ensuring timely and cost-effective completion while maintaining efficiency and adherence to budgets. - Health and Safety Compliance: Ensure all designs and implementations align with health and safety guidelines, maintaining a safe work environment. - Goal Achievement: Work toward key performance indicators (KPIs) and objectives set by executives, aligning your work with Axionova's strategic goals. Qualifications and Requirements: - Educational Background: Bachelors degree (or higher) in Engineering or a related field. - Experience: Demonstrated experience in a similar design engineering role. - Technical Proficiency: Ability to read, interpret, and execute technical drawings and diagrams accurately. - Project Management Skills: Proven ability to effectively manage engineering projects, from concept to completion. - Analytical Skills: Strong analytical and problem-solving abilities, with meticulous attention to detail. - Communication Skills: Excellent written and verbal communication skills for clear documentation and effective teamwork. - Manufacturing Knowledge: Familiarity with manufacturing processes, machinery, and equipment. - Time Management: Ability to prioritize tasks and manage workload to meet deadlines. - Reporting Skills: Proficient in report writing, conveying project updates and recommendations effectively. Why Join Axionova Engineering Limited? - Opportunity to work with a team of industry leaders. - Competitive compensation and benefits package. - Commitment to continuous learning and professional development. - A role in shaping cutting-edge engineering solutions for various industries. Apply Today If you're a dedicated professional with a passion for engineering innovation and excellence, we encourage you to apply and become part of Axionova Engineering Limited's mission to set new standards in engineering.

Danis is a third-generation, family-owned construction manager and builder with a long history of delivering complex, high-quality projects across healthcare, higher education, commercial, and industrial markets. Built on trust, integrity, and a commitment to people, we take pride in creating spaces that strengthen the communities we serve while providing rewarding careers for those who help us build them. As a Project Engineer at Danis, you'll play an integral role in helping deliver high-quality, well-coordinated construction projects from start to finish. You'll work closely with project managers, superintendents, designers, and subcontractors to ensure every phase of construction runs smoothly-on time, within budget, and according to plan. This position offers broad exposure to all aspects of the construction process, from field operations to project planning and documentation. At Danis, we're committed to helping our people build long-term careers. Through Danis University, you'll have access to training, mentorship, and professional development designed to strengthen your technical skills and prepare you for future leadership opportunities. Responsibilities What You'll Do: Project Planning & Coordination Assist the Project Manager and Superintendent in managing daily administrative and technical project activities. Develop and update project schedules, helping coordinate work among subcontractors, suppliers, and field teams. Participate in constructability reviews and site logistics planning to identify and address potential challenges early. Serve as a communication link between owners, designers, and field personnel, ensuring timely information flow. Support self-perform operations and subcontractor activities by monitoring progress and documentation through project management software. Quality, Safety & Field Support Verify that work meets design specifications, drawings, and Danis quality standards. Review submittals, RFIs, and shop drawings to ensure accuracy and compliance. Assist with layout verification and field coordination to resolve design or installation discrepancies. Support implementation of the Danis Safety Program by participating in safety audits, meetings, and pre-installation reviews. Help track inspections, testing, and quality control documentation. Cost & Documentation Management Help identify, document, and track changes to project scope and budget. Assist with processing submittals, change orders, and purchase orders. Maintain project logs and records, including drawings, submittals, RFIs, and field reports. Participate in project cost reviews and monthly audits. Collaboration & Relationship Building Build and maintain positive relationships with owners, architects, engineers, and subcontractors. Communicate clearly and proactively to keep teams aligned and issues resolved quickly. Contribute to a culture of teamwork, professionalism, and continuous improvement. Represent Danis with integrity and professionalism on-site and within the industry. Qualifications What You Bring Bachelor's degree in Engineering or Construction Management preferred. 2-5 years of construction experience (internship or full-time) with a general contractor. Familiarity with construction drawings, specifications, and project management tools. Strong organizational, communication, and problem-solving skills. A proactive, team-oriented mindset and interest in growing your career with Danis. Working Conditions You'll spend time both in the office and on active construction sites. Travel between regional offices may be required. Field work may include exposure to varying weather conditions and typical construction environments. Physical Demands Ability to climb ladders and scaffolds, lift up to 50 pounds, and remain on your feet for extended periods. Must have acceptable vision (with correction if necessary) and the ability to safely navigate job sites. Why Danis At Danis, our people are the foundation of our success. We invest in your development through Danis University, mentorship programs, and ongoing opportunities to expand your experience across diverse project types. We're proud to promote from within and support employees as they grow into new roles and take on new responsibilities. Why You'll Love Working Here You'll gain broad field experience across multiple projects and building systems. You'll work alongside talented builders and mentors who take pride in doing things right. You'll have access to ongoing training, technology, and growth opportunities. You'll join a company that values craftsmanship, teamwork, and continuous improvement. Competitive Total Compensation Annual merit increases and bonuses recognizing your growing expertise Profit sharing because your success drives our success Comprehensive Benefits Package Full health, dental and vision insurance for you and your family Short-term, long-term, and supplemental insurance coverage Life insurance for peace of mind Professional Development Danis University: 45+ training programs to advance your safety expertise Certification reimbursement and continuing education support Clear career progression paths within our growing organization Work-Life Integration Generous vacation and PTO policies Flexible spending accounts (FSA) and Health Savings Account (HSA) options 401K retirement planning Purpose-Driven Culture "Constructing Hope" community outreach program Work for a company that genuinely values safety over shortcuts Be part of a team that's building more than structures-we're building careers and communities Join a company where you can build exceptional projects-and a lasting career. EEO Statement Danis is an Equal Opportunity Employer. Danis does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status, or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need. NO AGENCY CALLS OR SUBMISSIONS Danis does not accept unsolicited resumes from recruitment agencies. Any resumes submitted without a signed agreement will be considered the property of Danis, and no fees will be paid. #LI-ONSITE

Job Description Project Engineer Employment Type: Full Time, Salaried Exempt Experience Level: Entry to Mid-Level, zero to three years A growing Atlanta based construction firm is seeking a motivated Project Engineer who wants to build a long-term career in commercial construction. This role is ideal for someone who wants hands on learning, exposure to both field and office operations, and a clear path toward becoming an Assistant Project Manager and eventually a Project Manager. Project Engineer is the operational support hub for the project team. You will manage documentation, coordinate with the design team, support procurement, assist with financial tasks, and maintain regular job site engagement. This is a learning centered role with direct mentorship from experienced Project Managers and Superintendents. Key Responsibilities Document Control and Information Management • Manage submittals, review shop drawings for compliance, and coordinate approvals with the design team • Draft and process RFIs and track responses to support field operations • Prepare agendas and detailed meeting minutes for OAC and internal meetings Project Management and Procurement Support • Assist with subcontractor buyout, scope review, material procurement • Track lead times and delivery schedules to maintain project flow • Support monthly pay applications, invoice coding, change order pricing, and other financial tasks • Lead the project closeout process by collecting warranties, manuals, and as built documents Field Support and Quality Control • Walk the job site regularly with the Superintendent to understand sequencing and verify progress • Document safety observations and support quality control checks • Manage the punch list process and coordinate subcontractors to complete final items • Maintain organized photo documentation using Procore or similar software Qualifications • Bachelor's degree in Construction Management, Civil Engineering, Architecture, or related field • Zero to three years of commercial construction experience such as internships, co-ops, or entry level roles • Proficiency with Microsoft Excel, Microsoft Project, and Bluebeam Revu • Familiarity with Procore or similar construction management software is a plus • Strong written communication skills and attention to detail • Eagerness to learn, willingness to ask questions, and a proactive mindset Work Environment and Physical Requirements • Hybrid work setting that includes office work and active job site presence • Ability to walk job sites, climb temporary stairs, and wear PPE • Ability to occasionally lift up to twenty pounds Compensation and Benefits Competitive salary, performance bonuses, medical, dental, vision, 401K, and a clear professional growth pathway. You will receive hands on mentorship and opportunities to advance quickly within the organization.

Department Civil/Municipal Employment Type Full Time Location Columbus, OH Workplace type Hybrid Key Responsibilities Skills, Knowledge and Expertise Benefits About The Mannik & Smith Group As one of the premier multi-disciplined consulting firms, we work with an exclusive collection of some of the best and fastest growing private entities, municipalities and governmental agencies in the region, nation and around the globe.

Our client is a leading construction firm in Columbus OH and looking to hire Project Engineers on a direct hire / full time basis. Project Engineers work with experienced Project Management and Field Supervision staff and assist with the overall safety, direction, completion, and financial outcome of construction projects from initial budget through project closeout. Project Engineer I's are expected to work with team members at all levels of Project Management and Field Supervision to establish operational priorities and ensure a quality project. They are also expected to grow and maintain positive and effective working relationships with both internal and external members of the Project Team and support departments. Responsibilities: Perform the following duties with support and direction from a Project Manager Ensure customer satisfaction by identifying and exceeding client needs Estimate, value engineer and develop project budgets Facilitate the subcontractor bid process to include processing, distribution and tracking of all project bidding documentation Utilize software programs and templates to process, distribute and track all project documentation Negotiate subcontractor and material buyout; develop and negotiate subcontracts. Plan and schedule projects Manage jobs in progress including subcontractor coordination, conflict resolution, documentation and ensuring quality and safety on every job Manage project costs through the ongoing evaluation of labor, material and equipment; continue to forecast and analyze construction costs, exposures and profits through project completion Perform project closeout Position Qualifications: B.S. in Construction, Engineering, or other related field preferred Prior Co-Op / Internship experience in construction field preferred Ability to build and maintain strong working relationships Strong written and verbal communication skills Self motivated with the ability to work independently and as part of a team Detail oriented

**2025 NEW GRADUATES WELCOME!** Launch your engineering career with ENTRUST Solutions Group as a Design Engineer I, where you'll help shape the future of utility infrastructure and contribute to safer, more resilient communities. Based in our **Columbus, Ohio** office, this hybrid role offers the opportunity to work alongside seasoned engineers, gain hands-on experience, and make a meaningful impact from day one. As a Design Engineer I, you'll support a variety of public improvement projects by tracking design requests, applying technical details, and collaborating with cross-functional teams to ensure project success. You'll be part of a dynamic, growth-oriented environment that values curiosity, clear communication, and continuous learning. If you're ready to build a strong foundation for your engineering career, we'd love to hear from you. **Minimum Qualifications:** - Bachelor's degree in engineering from an accredited university or equivalent program. - 0-2 years of natural gas engineering experience, preferably at an engineering consulting firm. - Must have valid driver's license without restrictions for project visits. **Pay:** + $68,000-$75,000 USD per year **What We Offer:** - A supportive and inclusive work environment that values diversity and encourages innovation. - Opportunities for professional growth and career development. - Competitive salary and comprehensive benefits package, including generous paid time off, 401(k) with company match, tuition reimbursement, and flexible work schedules. - Benefits offered include company-sponsored medical, dental, vision, and 401(k) plan with company match. Also offered are tuition reimbursement, voluntary life, disability, critical illness, accident and hospitalization plans. HSA or FSA medical accounts and FSA dependent care and transportation/parking accounts are also available. These benefits are subject to employee contribution amounts generally set annually. Full-time employees are eligible to earn PTO hours. May be eligible for discretionary bonus as determined by the company. **Why Join Us?** At ENTRUST Solutions Group, we are a community of over 3,000 dedicated professionals committed to our clients and each other. As an ENR Top 100 company, we provide comprehensive engineering, consulting, and automation services to various industries, including gas and electric utilities, telecommunication service providers, pipeline operators, and industrial companies. We are a forward-thinking organization dedicated to leveraging cutting-edge technology to drive success. We are committed to fostering a culture of innovation and continuous improvement. We believe in fostering a culture of inclusivity and respect, where everyone feels valued and empowered to contribute their unique perspectives. If you are passionate about gas utilities and looking for a place to grow your career, we would love to hear from you! **Explore More Opportunities:** Not quite the right fit? Check out all our openings at ENTRUST Solutions Group Careers. ENTRUST Solutions Group is proud to be an Equal Employment Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Headhunters and recruitment agencies may not submit resumes/CVs through this website or directly to managers. ENTRUST Solutions Group does not accept unsolicited headhunter or agency resumes and will not pay fees to any third-party agency or company that does not have a signed agreement with ENTRUST Solutions Group. \#LI-hybrid \#LI-AF1 Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

An international company with a facility in the Columbus, OH. area is currently seeking Junior Level Electro Mechanical Engineers for long-term opportunities with their growing team. These are exciting opportunities for degreed Engineer candidates looking for a company that offers excellent opportunities for growth, stability, and advancement! The Electro Mechanical Engineer position is salaried with pay rates will be salaried with pay rates anticipated to be between $55,000 to $65,000 annually based on experience and education (we will consider paying more for the right skills). All well qualified candidates will be considered regardless of pay rate. A generous compensation package includes an annual bonus, affordable medical plans, paid holidays / vacation time, 401k, employee events, and more! Qualified Electro Mechanical Engineers will have most, if not all, of the following skills and experience: Bachelors Degree in Mechanical, Electrical, or Electro Mechanical Engineering is required- (no internship candidates). Any experience with power and free conveyors, skid conveyors, and other automated material handling equipment is a plus, but not required. Willingness to create quotes, estimates, and bids for small projects. Electrical and / or Hydraulic troubleshooting background is a plus, but not required. Willingness to travel as needed. Minimal travel is anticipated in the first year, but will increase to 30-40% travel in North America. Willingness to work between 40-50 hours per week. Must be able to work in the United States (no H-1 sponsorship or student visas considered). Must be able to complete standard pre-hire checks including background, drug screen, references, etc. Should you be qualified and interested, please send an updated copy of your resume to [email protected].

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together. Role description: Arcadis is seeking an Instrumentation & Controls (I&C) System Design Engineer to join our Resilience Water team in our Detroit , MI location. This is an exciting opportunity for an I&C Systems Design Engineer, preferably with consulting engineering experience, to join our team and lead projects with a variety of I&C, automation system design, and SCADA integration. The selected candidate will be responsible for I&C and SCADA design and implementation services for diverse clients and projects for environmental remediation, industrial & municipal water and wastewater treatment, conveyance systems, and facilities. Role accountabilities: This role provides engineering and design services to produce design & construction documents for projects. They will coordinate with process, mechanical, and electrical engineers assigned to the project and prepare technical memorandums and develop design criteria, SCADA system architecture, process and instrumentation diagrams (P&IDs), SCADA network diagrams, process control functional narratives, control schematics, panel layout diagrams, and interconnection diagrams. Additional duties include: * Support projects and clients in the planning, design and construction of water/wastewater facilities and other similar industrial facilities, serving as Arcadis' main point of contact with our clients for their I&C needs. * Project Manager leading all facets of project, to include; budgeting, planning, cost estimating, design and execution of SCADA and instrumentation & control systems. * Support electrical engineering and developing electrical design to support the I&C systems design. Conduct factory testing, site acceptance testing, field checkout, and startup of I&C and SCADA system startups. Utilize technical experience and expertise in the execution of I&C and SCADA projects from inception to successful startup and turnover. * Program process control logic in PLCs and configure graphical HMI for SCADA system on a variety of platforms. Configure historical data collection, archiving and generating reports on a variety of platforms. Produce effective and accurate written specifications for implementing I&C and SCADA projects. * Mentor junior engineers and designers. Required Qualifications: * Bachelor's degree in Mechanical, Electrical, Chemical, Environmental Engineering or a closely related field of study * 7+ years of I&C, Automation, and SCADA system design and implementation experience in water/wastewater market. * Professional Engineer license or the ability to obtain license within 12 months. Key Skills and Attributes: * Basic knowledge of Autocad and Revit. Ability to self-direct and work on multiple assignments at once while meeting project deliverable dates and completing other task-driven assignments * Excellent communication skills, both oral and written, as well as excellent teamwork skills. Experience with Microsoft Office (Word, Excel, MS Project, and Outlook) * Advance knowledge in applying instrumentation and controls to process and electromechanical equipment and developing SCADA networks. Knowledge of designing and developing fiber optic cable networks for SCADA systems. Advance knowledge of radio and cellular telemetry networks. Basic knowledge of IT and industrial networks. * Valid driver's license and clean driving record. Willingness to travel (25%). Preferred Qualifications: * 10+ years of experience in developing bid and construction documents * PLC/HMI programming, configuration & startup experience Why Arcadis? We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It's why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. You'll do meaningful work, and no matter what role, you'll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Join Arcadis. Create a Legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity and affirmative action employer. Women, minorities, people with disabilities and veterans are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, gender identity, citizenship status, disability, veteran status, or any other basis prohibited by law. Arcadis offers benefits for full time and part time positions. These benefits include medical, dental, and vision, EAP, 401K, STD, LTD, AD&D, life insurance, paid parental leave, reward & recognition program and optional benefits including wellbeing benefits, adoption assistance and tuition reimbursement. We offer nine paid holidays and 15 days PTO that accrue per year. The salary range for this position is $80,461 - $132,761. Actual salaries will vary and are based on several factors, such as experience, education, budget, internal equity, project and location. #LI-RT4 #Resilience-NA #Water-NA #Water-NA-D&E #WaterJobsOhio

POSITION: Engineering Technician FULL-TIME/PART-TIME: Full Time LOCATION: Dublin, OH React Health is a fast-paced, growth-driven manufacturer and distributor of medical equipment, dedicated to supporting patients, caregivers, physicians, and healthcare providers. With a focus on respiratory and sleep health sectors, we offer a comprehensive range of products and services across acute care, non-acute care, and home medical equipment. By integrating manufacturing and distribution, React Health addresses the needs of both undiagnosed individuals and those requiring therapy after diagnosis, particularly within the sleep and respiratory care sectors. GENERAL SUMMARY Working alongside engineers to design, build and test solutions to a variety of technical problems. Inspecting and modifying existing designs and prototypes. Conducting research, collecting data, and writing reports. QUALIFICATIONS The position requires a minimum of 2 years of related experience. Minimum of a high school diploma or equivalent. Experience with development within a regulated environment. Experience with lab development of products including Soldiering, prototyping, fixturing and test equipment. Creative thinking and innovation with good problem-solving skills. Self-motivated and able to set personal and professionals goals, and able to achieve these goals with minimal supervision. Preferred Education Associates level degree with Mechanical and/or Electrical focus, or 4 years equivalent experience Preferred Experience Development of Electro-Mechanical Medical Devices. Testing of medical devices including pressure, flow, sound testing as well as other equipment used in product development. Experience in manufacturing environments. Excellent attention to detail and project management skills. Excellent written/oral communication skills required. Must be able to work effectively with diverse groups of people. Physical Demands Requires normal visual acuity and hearing. Lifting items up to 25 Pounds Moving equipment and products will be expected on a daily basis. Required to sit and use their hands and fingers to handle or feel and manipulate keys on a keyboard. Additional skills may be required to perform additional task(s) specific to work location, department or line of business. Working Conditions Predominantly operates in an office environment. Will work in an Engineering Lab based environment. Will work with different equipment to assemble or test medical devices. Some work (less than 5%) requires moving and lifting of heavy equipment. DUTIES AND ESSENTIAL FUNCTIONS Each Employee consistently demonstrates the following essential functions: Work in a product development and testing environment in the development of Medical Devices Serve as a lab supervisor to track equipment and tools and ensure calibration of equipment; insuring lab meets all applicable safety and regulatory standards. Perform verification and validation testing to ensure product meets specifications. Preparing reports by collecting, analyzing, and summarizing data Building and testing prototypes. Designing and building testing fixtures. Preparing documentation of within regulated environment as needed. Implementing methods to inspect, test and evaluate the reliability of manufacturing processes, products, and production equipment. Work with all aspects of development including system specifications, risk management, V&V test plans, traceability matrices, test protocols, and test reports. Making sure processes adhere to quality standards. Working in accordance with deadlines for delivery of products. Attends and participates in departmental meetings. Attends seminars and training sessions necessary to maintain appropriate level of professional competence. Ensures all department compliance guidelines are met. Attends all meetings, in-services training, or continuing education as delegated by the supervisor. Provides customer focused interactions. Performs all duties necessary for the department as per department policies and procedures. Performs other duties and responsibilities as delegated by the supervisor within the scope of practice and the responsibilities in the department. Reasonable accommodations may be made to accommodate individuals with disabilities to perform the basic functions of the position without compromising client care. React Health is an Equal Opportunity/Affirmative Action Employer and is committed to providing a drug-free workplace. We are an Equal-Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state, or local protected class.

Purpose: The Design Supervisor is responsible for the training and development of the design team, and for driving sales for Floor and Decor. Additionally, the Design Supervisor ensures customers have a positive sales experience by receiving exceptional customer service through design services. Minimum Eligibility Requirements Design education (BA or AA in Interior Design) 6 years interior design experience in lieu of design education Combination of education and experience equal to 6 years 3-5 years of leadership or management experience Knowledge of hard surface flooring preferred Proficient in basic mathematical skills Must be self-motivated and able to multi-task in a fast-paced environment Excellent verbal, written, and interpersonal skills Basic computer knowledge, including Microsoft Office suite Perform other duties as assigned Internal candidates must have 12 months of experience in a Sr. designer position, ADM role, or higher Essential Job Functions Proven ability to build and maintain lasting relationships with residential and professional customers in the industry Hire and develop a dynamic and motivated design team, including performance evaluations Greet store customers in a helpful manner and supports store design walk-in needs Maintain master store design appointment calendar and schedule design appointments for existing and potential customers, while developing clientele through networking and referrals, as well as leads generated within the store Providing tile, wood, stone and accessories advice to homeowners, interior designers, and builders for both residential and commercial projects. Design and sell complete, functional and aesthetically appealing solutions Manage multiple, simultaneous customer projects through all phases with a high level of accuracy, timeliness and follow-up including consistent and concise communication to customers and others. Proficient and consistent use of company communication tools and emails are required Collaborate, partner and communicate with store leadership and employees to manage projects from inquiry to installation, and achieve sales and other goals Enthusiastically support all company initiatives and goals by modeling and coaching best practices with store employees Responsible for Design Center maintenance and maintaining company visual standards Engage in current and emerging design trends in your market Responsible for understanding and utilizing design applications i.e.; Salesforce, proprietary Online Design Appointment Scheduler, MyProject, James Martin, and HousPro. Participate in local professional affiliation like ASID, NKBA Perform other duties as assigned Working Conditions (travel, environment) Limited travel required including car travel While performing the duties of this job, the employee is frequently exposed to a warehouse environment and moving vehicles. The noise level in the work environment is typically moderate to noisy. Physical/Sensory Requirements Medium Work - Ability to exert 20-50 pounds of force occasionally, and/or 10-25 pounds of force frequently, and/or greater than negligible up to 10 pounds of force constantly to lift, carry, push, pull, or otherwise move objects. The employee is often required to use their hands and fingers, to handle or feel. The employee is occasionally required to stand, walk, reach with arms and hands, climb or balance, and to stoop, kneel, crouch or crawl. Store Hours Monday - Friday 7:00 AM - 8:00 PM Saturday 8:00 AM - 7:00 PM Sunday 10:00 AM - 6:00 PM Pickup Hours Monday - Friday 7:00 AM - 7:00 PM Saturday 8:00 AM - 7:00 PM Sunday 10:00 AM - 6:00 PM Benefits & Rewards Bonus opportunities at every level Career advancement opportunities Relocation opportunities across the country 401k with discretionary company match Employee Stock Purchase Plan Referral Bonus Program 80 hrs. annualized paid vacation (full-time associates) 4 paid holidays per year (full-time hourly store associates only) 1 paid personal holiday of associate's choice and Volunteer Time Off program Medical, Dental, Vision, Life and other Insurance Plans (subject to eligibility criteria) Equal Employment Opportunity Floor & Decor provides equal employment opportunities to all associates and applicants without regard to age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, disability, veteran status, genetic information, ethnicity, citizenship, or any other category protected by law. This policy applies to all areas of employment, including recruitment, testing, screening, hiring, selection for training, upgrading, transfer, demotion, layoff, discipline, termination, compensation, benefits and all other privileges, terms and conditions of employment. This policy and the law prohibit employment discrimination against any associate or applicant on the basis of any legally protected status outlined above.

Marous Brothers Construction (MBC) is seeking a self-motivated Project Engineer for our Building Groups in Columbus, OH! MBC is recognized as one of the leading construction firms in the Midwest, offering integrated services for complete construction solutions. Learn more about MBC by visiting ******************************* Join Marous Brothers Construction as a Full-Time Project Engineer, also known as Assistant Project Manager, and elevate your career to new heights! Located on The Ohio State University's campus, this onsite position offers you the exhilarating opportunity to shape innovative projects that leave a lasting impact. Your Journey Starts Here: As an Assistant Project Manager, you'll support daily operations across dynamic jobsites. You'll manage RFIs, submittals, material deliveries, and project documentation. Collaborate with seasoned professionals, solve problems creatively, and help drive project success. You should possess a problem-solving mindset, ready to think outside the box when challenges arise on job sites. Time management skills are critical for meeting deadlines and ensuring project milestones are achieved. What Powers Your Path to Success: * Bachelor's degree or equivalent experience * 1-3 years in a Project Engineer or similar role * Strong communication, organization, and analytical skills * Familiarity with project management software * A proactive, ethical, and team-oriented mindset Why join our team? * Top Workplace 2025, 2024, 2023, & 2022 - The Plain Dealer & cleveland.com * Top Workplace USA 2025 * Competitive compensation package * Bonuses * Health insurance 3 Plan Options, including HSA & FSA * HSA & FSA Annual Company Contribution * $3,000 Referral Bonus * Employee fitness room * Employee open kitchen * Employee outdoor courtyard meeting/gathering space * Marous University - weekly free relevant education * Monthly culture events * Tuition Reimbursement Program * Career path opportunities * Flexible Scheduling * Mentor Program * Stability - family owned and operated since 1980 * Medical * Dental * Orthodontic * Vision * Virtual Mental and Physical Health * Accident Insurance * Critical Illness * Hospital Indemnity * Life Insurance/AD&D *company paid* * 401k with employer match * Paid Time Off * Paid Holidays * Parental Leave * STD & LTD *company paid* * Paid maternity leave via STD * Travel Reimbursement * Free Parking * Employee Assistance Program, including Legal & Financial *company paid* * Casual Fridays * Community Support Program Looking for a team that invests in you? We're looking for talented individuals like you to join our team and help us achieve our goals. Be the driving force behind the next Buckeye chapter Check out our other projects in the Columbus area... * Columbus Avenue Revitalization * SITECH Ohio Marous Brothers Construction is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. MBC is also committed to compliance with all fair employment practices regarding citizenship and immigration status. We conduct pre-employment drug testing. Also must be able to pass background check.

At Integrity Kokosing Pipeline Services LLC (IKPS), we are committed to setting the benchmark in the oil and gas industry by delivering exceptional construction services with a focus on safety, quality, and integrity. Proudly Ohio-based but with a reach that extends across multiple states, IKPS offers a comprehensive range of services, including pipeline installation and maintenance, water resource management, integrity management, facility work, and fabrication. Since joining forces with Kokosing in 2012, we have combined our strengths to deliver unparalleled service and innovation. Join our dedicated team and be part of a company that contributes to the overall efficiency and effectiveness of the oil and natural gas industries to drive the future of energy infrastructure. Job Description: About Integrity: At Integrity Kokosing Pipeline Services LLC (IKPS), we are committed to setting the benchmark in the oil and gas industry by delivering exceptional construction services with a focus on safety, quality, and integrity. Proudly Ohio-based but with a reach that extends across multiple states, IKPS offers a comprehensive range of services, including pipeline installation and maintenance, integrity management, facility work, and fabrication. Position Summary: A Project Engineer at Integrity Kokosing works to support the field team in overall project success and progression. By assisting the field team with project planning and coordination, they have a constant pulse on all project activities monitoring project KPIs, costs, billings, schedules, and contracts assisting in the implementation of corrective actions leading to overall project success. **If you excel in technical functions such as technical operations, project coordination, scheduling, budgeting, documentation review, and progress reporting, we strongly encourage you to apply! Experience in the construction space is a preference; however, we are open to considering the right individual who is a top performer in the functions listed above as your skills may be very transferrable. ** Eligibility Requirement: Applicants must be currently authorized to work in the United States on a full-time basis. We are unable to sponsor or take over sponsorship of employment visas at this time. Duties and Responsibilities: Coordinate with the project team to ensure compliance with the contract, budget, schedule, and job cost Develop, implement and administer project engineering procedures and other work controlling documents (submittals, RFI's, expediting material deliveries, payment of Subcontractors/Vendors and Owner pay requests) Work with project teams to gather and review weekly documentation; Timecards, Daily progress reports, JSA, and equipment hour reports Create subcontracts and schedule work to maintain overall project schedule, perform subcontractor prejob safety meetings Work with Superintendent to control job costs and production budgets Prepare and submit accurate and timely monthly cost, income, and cash flow projections Coordinate, price and assist Project Manager in settlement of change orders and claims Complete site inspections to produce daily reports of work and subcontractor activities Update project schedule based on site inspections and progress to produce an accurate timeline and distribute to appropriate stakeholders Maintain appropriate one call notifications for assigned projects Review daily progress reports to create and distribute invoices as required by the assigned project requirements Act as a liaison between project management and field leadership to ensure construction complies with drawings and specifications Represent assigned project and IKPS during client or project management meetings Perform additional assignments per supervisor's direction Skills and Abilities: Ability to travel as this role requires regular and extensive travel within the project geographic region. Anticipate 70% travel in this position Excellent communication and interpersonal skills, plus demonstrated ability to manage and function in a team of varied disciplines Understand and interpret safety laws and company policies/standards Knowledge of construction equipment and techniques, drawings, specifications, building materials, and required standards is preferred Must be able to read and interpret blueprints and other technical drawings and documents. Must have project management and organizational planning skills. Education and experience: Possess a 4-year bachelor's degree in engineering, construction management, or equivalent combinations of technical training and experience is preferred (5) + years of similar construction engineering experience preferred Experience with computer software, primarily MS Excel with the ability to learn new software programs, Oracle Primavera for scheduling, Viewpoint for accounting, is preferred Benefits: Integrity Kokosing offers competitive compensation and benefit packages including medical insurance, life insurance, disability insurance, paid time off, mileage reimbursement, per diem, and a 401k program. Integrity Kokosing is an equal employment opportunity employer and affirmation action federal/state contractor. The company does not discriminate on the basis of race, color, religion, sex, sexual, orientation, gender identity, national origin, age, disability, veteran status, or any other protected class. Integrity Kokosing offers a competitive compensation and benefits package including medical, dental, vision, company paid life, and disability insurance. We also provide competitive incentives to eligible team members, like paid time off and 401K plus match to reward our team members for staying committed to our customers and keeping safety a priority. Integrity Kokosing is an equal employment opportunity employer and affirmation action federal/state contractor. The company does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected class.

Job Description An international company with a facility in the Columbus, OH. area is currently seeking Junior Level Electro Mechanical Engineers for long-term opportunities with their growing team. These are exciting opportunities for degreed Engineer candidates looking for a company that offers excellent opportunities for growth, stability, and advancement! The Electro Mechanical Engineer position is salaried with pay rates will be salaried with pay rates anticipated to be between $55,000 to $65,000 annually based on experience and education (we will consider paying more for the right skills). All well qualified candidates will be considered regardless of pay rate. A generous compensation package includes an annual bonus, affordable medical plans, paid holidays / vacation time, 401k, employee events, and more! Qualified Electro Mechanical Engineers will have most, if not all, of the following skills and experience: Bachelors Degree in Mechanical, Electrical, or Electro Mechanical Engineering is required- (no internship candidates). Any experience with power and free conveyors, skid conveyors, and other automated material handling equipment is a plus, but not required. Willingness to create quotes, estimates, and bids for small projects. Electrical and / or Hydraulic troubleshooting background is a plus, but not required. Willingness to travel as needed. Minimal travel is anticipated in the first year, but will increase to 30-40% travel in North America. Willingness to work between 40-50 hours per week. Must be able to work in the United States (no H-1 sponsorship or student visas considered). Must be able to complete standard pre-hire checks including background, drug screen, references, etc. Should you be qualified and interested, please send an updated copy of your resume to ***********************.

Apply Engineering Technician (Mechanical) Department of Defense Defense Logistics Agency Apply Print Share * * * * Save * This job is open to * Requirements * How you will be evaluated * Required documents * How to apply See below for important information regarding this job. Summary See below for important information regarding this job. Overview Help Accepting applications Open & closing dates 12/02/2025 to 12/14/2025 This job will close when we have received 100 applications which may be sooner than the closing date. Learn more Salary $77,154 to - $120,222 per year Pay scale & grade GS 11 - 12 Location 1 vacancy in the following location: Whitehall, OH 1 vacancy Remote job No Telework eligible Yes-as determined by the agency policy. Travel Required 25% or less - You may be expected to travel for this position. Relocation expenses reimbursed No Appointment type Permanent Work schedule Full-time Service Competitive Promotion potential 12 Job family (Series) * 0802 Engineering Technical Supervisory status No Security clearance Other Drug test No Financial disclosure No Bargaining unit status Yes Announcement number DLAWpnSpt-26-12843335-DHA Control number 851290300 This job is open to Help The public U.S. Citizens, Nationals or those who owe allegiance to the U.S. Clarification from the agency This is a DHA for Certain Personnel of DoD Direct Hiring Authority notice open to the Public. Videos Duties Help * If selected at the GS-11 level, duties will be performed in a developmental capacity. * Reviews test plan information, previous test data (as applicable) and evaluate the technical drawings, specifications or other documents to understand the characteristic parameters of the features to be verified. * Utilizes automated test equipment (ATE) requiring complex test equipment setup and programming and traditional hand-held test equipment. * Performs dimensional, materials, and hydrostatic testing on various NSNs that can have unique requirements based on information contained in the technical data packages. * Communicates test failures with customers, explaining results obtained and procedures used, and interpreting specification requirements, as appropriate. * Utilizes the various software, such as Open DMIS, Virtual DMIS, Metlogix M3 that is installed on each piece of ATE. Requirements Help Conditions of employment * Must be a U.S. citizen * Tour of Duty: Flexible * Security Requirements: Non-Critical Sensitive * Appointment is subject to the completion of a favorable suitability or fitness determination, where reciprocity cannot be applied; unfavorably adjudicated background checks will be grounds for removal. * Fair Labor Standards Act (FLSA): GS-12: Exempt/ GS-11: Non-Exempt * Selective Service Requirement: Males born after 12-31-59 must be registered or exempt from Selective Service. * Recruitment Incentives: Not Authorized * Bargaining Unit Status: Yes * Pre-Employment Physical: Required * Selectees are required to have a REAL ID or other acceptable identification documents to access certain federal facilities. See *************************** for more information. * Defense Acquisition Workforce position. Must complete DoD certification and other requirements. See Addtl Info. Qualifications To qualify for an Engineering Technician (Mechanical), your resume and supporting documentation must support: A. Specialized Experience: One year of specialized experience that equipped you with the particular competencies to successfully perform the duties of the position and is directly in or related to this position. To qualify at the GS-12 level, applicants must possess one year of specialized experience equivalent to the GS-11 level or equivalent under other pay systems in the Federal service, military, or private sector. To qualify at the GS-11 level, applicants must possess one year of specialized experience equivalent to the GS-09 level or equivalent under other pay systems in the Federal service, military, or private sector. Applicants must meet eligibility requirements including minimum qualifications, and any other regulatory requirements by the cut-off/closing date of the announcement. Creditable specialized experience includes: GS-12 * Resolving conflicts with customers regarding test methods, procedures, and interpretations of results.- * Serving as project manager on engineering/testing dimensional projects.- * Performing extensive design, manufacturing, and cost analysis. GS-11 * Analyzing complex technical engineering problems. * Reviewing and interpreting complex technical data packages. * Testing and evaluating a variety of mechanical components. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Physical Demands: The work requires some physical exertion such as long periods of standing; recurring bending, crouching, stooping, stretching, or similar activities; occasional lifting of light to moderately heavy items weighing less than 50 pounds and with assistance of an engine hoist manipulates items over 50 pounds. Work is performed in a test lab/machine shop/office environment. Work Environment: The work area involves operation of mechanical test equipment and machine shop tools which includes some exposure to moderate risks and discomforts such as dust, strong odors, or fumes from fuels, chemicals, or engine exhaust; dust, grease, electrical hazards, moving machinery, etc. The work environment requires the employee to stay alert continually and to take special safety precautions including wearing safety glasses/goggles, special protective items of clothing, etc.Steel toed shoes are preferred but not mandatory. Education Substitution of education may not be used in lieu of specialized experience for this grade level. Additional information For Important General Applicant Information and Definitions go to: ****************************************************************** Reemployed Annuitants: This position does not meet criteria for appointment of Reemployed Annuitants. The DoD criteria for hiring Reemployed Annuitants can be found at: ********************************************************************************** Position requires DoD Acquisition Test & Evaluation, Foundational certification within required time frames. Selectee must also achieve 80 hours of Continuous Learning Points (CLPs) every 2-years. Click here for more details and Resources. Drug-Free Workplace Policy The Defense Logistics Agency (DLA) is committed to maintaining a safe, drug-free workplace. All DLA employees are required to refrain from illegal drug use on and off duty. DLA conducts pre-employment, reasonable suspicion, post-accident, and random drug testing. Applicants tentatively selected for employment in testing designated positions will undergo a urinalysis to screen for illegal drug use prior to appointment. Refusal to undergo testing or testing positive for illegal drugs will result in withdrawal of the tentative job offer and a six-month denial of employment with DLA from the date of the drug test. Employees in drug testing designated positions are subject to random drug testing. The DLA drug testing panel tests for the following substances: marijuana, cocaine, opiates, heroin, phencyclidine, amphetamines, methamphetamines, fentanyl, norfentanyl, methylenedioxymethamphetamine (MDMA), methylenedioxyamphetamine (MDA), and opioids. ADVISORY: Use of cannabidiol (CBD) products may result in a positive drug test for marijuana. DLA employees are subject to Federal law and under Federal law, Marijuana is a Schedule I drug and is illegal. Additional guidance on writing a federal resume can be found at: USAJOBS Help Center - How do I write a resume for a federal job? The resume builder can help you create a resume using these recommendations and uses the information in your USAJOBS profile to help you get started. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. How you will be evaluated You will be evaluated for this job based on how well you meet the qualifications above. The assessments for this job will measure the following Competencies: * Attention to Detail * Customer Service * Integrity/Honesty * Interpersonal Skills * Learning * Reading Comprehension * Reasoning * Self-Management * Stress Tolerance * Teamwork Direct Hire Evaluation: Once the application process is complete, a review of your application will be made to ensure you meet the job requirements. This vacancy will be filled through a Direct Hire Authority. All applicants who meet the basic qualification requirements will be forwarded to the Selecting Official for consideration. The rule of Three, Veteran's Preference and traditional rating and ranking of applicants do not apply to this vacancy. We will evaluate your application for basic eligibility and to determine if your experience meets the basic qualification requirements described in the announcement. All applicants who meet the qualifications and other basic requirement are eligible for referral and selection consideration. Please follow all instructions carefully. Errors or omissions may affect your rating. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. Required documents Required Documents Help To apply for this position you must provide a complete Application Package. Each Application Package MUST include: * Your Resume: IMPORTANT UPDATE: Your resume must not exceed two (2) pages. If your resume exceeds the two-page limit, you will be removed from consideration for this announcement. The resume and required supporting documentation should provide the minimum qualifications and relevant experience for the announced position. Must include the work schedule, hours worked per week, dates of employment, and duties performed. If multiple resumes are submitted by an applicant, only the last resume submitted will be reviewed for qualifications and referred for selection consideration, if eligible. The resume must not be more than 5MB and should be saved and uploaded as a PDF to maintain formatting and number of pages. We also accept GIF, JPG, JPEG, PNG, RTF, TXT, PDF, ODT or Word (DOC or DOCX). We do not accept PDF portfolio files. Page margins should be 0.5 inches, and font styles must be legible. Consider using 14-point size font for titles and 10-point for the main text. We recommend using a font like Lato, if available. Other widely available options are Calibri, Helvetica, Arial, Verdana, Open San Source Sans Pro, Roboto or Noro Sans. * Applicable documents to support the eligibility(s) for which you are applying. Please review the following link for a listing of the additional documents you will need to provide: Supporting Documents. If you are relying on your education to meet qualification requirements: Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating. How to Apply Help This job will close when the agency has received 100 applications, which may be sooner than the closing date. To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below. The complete application package must be submitted by 11:59 PM (EST) on the closing date to receive consideration. * To begin, click Apply Online to access an online application. Follow the prompts to select your USAJOBS resume and/or other supporting documents. You will need to be logged into your USAJOBS account or you may need to create a new account. * You will be taken to an online application. Complete the online application, verify the required documentation, and submit the application. NOTE: Resumes up to a total of two pages will be accepted. Your resume must not exceed two (2) pages. If your resume exceeds the two-page limit, you will be removed from consideration for this announcement. * You will receive an email notification when your application has been received for the announcement. * To verify the status of your application, log into your USAJOBS account, ************************ select the Application Status link and then select the More Information link for this position. The Application Status page will display the status of your application, the documentation received and processed, and your responses submitted to the online application. Your uploaded documents may take several hours to clear the virus scan process. To preview the questionnaire, please go to ********************************************************* Agency contact information DLA Weapons Support Columbus Phone ************ Email ***************** Address DLA Weapons Support - Columbus 3990 East Broad Street Columbus, OH 43213 US Next steps Once you successfully complete the application process, you will receive a notification of receipt. Your application package will be reviewed to ensure you meet the basic eligibility and qualifications requirements, and you will receive a notification. A review may be completed of your online questionnaire and the documentation you submitted to support your responses. Applicants that are found qualified may be referred to the hiring official for consideration, and you will receive a notification of referral. The selecting official may choose to conduct interviews, and as part of the selection process, applicants may be required to complete additional supplemental documents. Once the selection is made, you will receive a notification of the decision. If interviews are conducted, DLA uses a technique called Behavior Based Interviewing (BBI). Be sure to check your USA Jobs account for your notification updates. Fair and transparent The Federal hiring process is set up to be fair and transparent. Please read the following guidance. Criminal history inquiries Equal Employment Opportunity (EEO) Policy Financial suitability New employee probationary period Privacy Act Reasonable accommodation policy Selective Service Signature and false statements Social security number request Required Documents Help To apply for this position you must provide a complete Application Package. Each Application Package MUST include: * Your Resume: IMPORTANT UPDATE: Your resume must not exceed two (2) pages. If your resume exceeds the two-page limit, you will be removed from consideration for this announcement. The resume and required supporting documentation should provide the minimum qualifications and relevant experience for the announced position. Must include the work schedule, hours worked per week, dates of employment, and duties performed. If multiple resumes are submitted by an applicant, only the last resume submitted will be reviewed for qualifications and referred for selection consideration, if eligible. The resume must not be more than 5MB and should be saved and uploaded as a PDF to maintain formatting and number of pages. We also accept GIF, JPG, JPEG, PNG, RTF, TXT, PDF, ODT or Word (DOC or DOCX). We do not accept PDF portfolio files. Page margins should be 0.5 inches, and font styles must be legible. Consider using 14-point size font for titles and 10-point for the main text. We recommend using a font like Lato, if available. Other widely available options are Calibri, Helvetica, Arial, Verdana, Open San Source Sans Pro, Roboto or Noro Sans. * Applicable documents to support the eligibility(s) for which you are applying. Please review the following link for a listing of the additional documents you will need to provide: Supporting Documents. If you are relying on your education to meet qualification requirements: Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.