Technician jobs in Biloxi, MS

LeVanta is building the world's first float-fly-float unmanned drone that will significantly change defense and commercial maritime operations. We're striving to protect the national interests of US and ally countries by breaking technological barriers that meet pressing operational needs. Our team of passionate professionals-including industry-leading engineers, former military operators, and other experts, are committed to creating a high value company leveraging truly disruptive UAV technology. These cutting-edge drones provide a seamless sea-air interface, offering the ability to float indefinitely while minimizing energy consumption, and taking off to fly at high speeds on demand. Designed to address the challenges of aerial endurance and rough sea conditions, LeVanta Tech's innovative solutions serve to redefine the future of drone operations. Located at the forefront of technological advancements, LeVanta Tech is dedicated to pushing boundaries in the field of drone technology. Role Description The LeVanta engineering technician will help build and test prototypes, requiring extensive hands-on work. The technician will also be expected to work independently with a creative and proactive approach, identifying potential problems and offering solutions. Tasks include but are not limited to engineering research, product/component design, test and data analysis, and hands on fabrication of prototype drone components, drones, and drone testing apparatus and support infrastructure. The start-up environment is dynamic, lean, demanding, and fast-paced. The ideal candidate is someone who can immediately contribute, deliver on planned goals, and motivate and infect others with a passion for product development. The individual hired for this position will be required to work at LeVanta's facility in Stennis, MS. Skills & Experience Required: Microsoft Office proficient Solidworks or other CAD software proficiency Skills & Experience Preferred: Structural design & composites work 3-D printing Electrical wiring, harness, and assembly Drone software programming and/or flight & piloting Job title: Engineering Technician Location: Stennis, MS Years of Experience: Minimum 2 years Job Type: Full-Time (40 hr/wk) Reports To: CTO, Johnny Doo Travel Required: Minimal Annual Salary: $25/hour Other Requirements: US Citizenship Education Required: BS/AS degree or trade school certificate or significant hands-on technical and engineering experience. Preference for educational experience in mechanical, ocean, aeronautical, computer science/engineering, or electrical engineering, or closely related field. Candidates with significant training and skill sets in trade disciplines will also be considered.

Please note: Only 2nd shift (2pm-10:30pm) and 3rd shift (10pm-6:30am) Maintenance Technician positions available. No 1st shift Maintenance Technician positions available at this time. GRAMMER is specialized in developing and manufacturing components and systems for car interiors as well as driver and passenger seats for off-road vehicles, trucks, buses, and trains. As a global partner to the vehicle manufacturing industry, we are represented around the world by our two divisions, Automotive and Commercial Vehicles. Our employees are constantly engaged in developing and producing innovative, flexible solutions to meet challenges in today's competitive global market. GRAMMER can be found on four continents with more than 50 production, distribution and logistics sites in 20 countries. GRAMMER is a leading North American full service automotive supplier of highly engineered thermoplastic components and assemblies for interiors and air and fluid management systems. Culture: Here at GRAMMER, we foster a culture that embraces our Grammer CODE: Collaborate in an inclusive environment, Openness in communication and ideas, Drive for results with energy and Empower yourself and others by taking ownership of decisions and actions. What we are looking for: Grammer is looking for a Maintenance Tech team member to join our location in Shannon, MS. The ideal candidate will enjoy working in a team environment. This individual will have an opportunity to make lasting and positive changes in our team! What you will be doing: This person is responsible for all facets of supporting the Automotive area and expertise in all aspects of industrial maintenance and performs skilled work in the installation, maintenance, and repair of mechanical and electrical equipment. Responsible for all facets of supporting the automotive area and expertise in all aspects of industrial maintenance and performs skilled work in the installation, maintenance, and repair of mechanical and electrical equipment. Assemble, install, or repair wiring, electrical or electronic components, pipe systems, plumbing, machinery, or equipment. Diagnose mechanical problems and determine how to correct them, read blueprints, repair manuals, or parts catalogs, as necessary. Dismantle devices to access and remove defective parts, using hoists, cranes, hand tools, and power tools. Operate mill, lathe, drill press and other machine shop tools to repair or fabricate machine parts, jigs, fixtures, or tools. Inspect, operate, or test machinery or equipment to diagnose machine malfunctions. Perform routine preventive maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, and facilities. Inspect drives, motors, and belts, check fluid levels, replace filters, or perform other maintenance actions, following checklists. PLC troubleshooting experience. Hydraulics and pneumatics troubleshooting and repair. Troubleshoot, repair and perform preventive maintenance on mechanical and electrical equipment and machinery using standard and specialized hand/power tools and diagnostic equipment. Install conduit and related hardware to power equipment, repair motor control systems and electrical equipment and replace light fixtures. What you will bring along: High school diploma or equivalent required Minimum 2-4 years of related experience Automotive experience preferred Must have the ability to multi-task in a fast-paced environment Good written and verbal communication skills Detail oriented Excellent time-management skills with great attention to organization Excellent people skills Excellent computer skills in Microsoft Office with some knowledge of HRIS systems Ability to work effectively with all levels of management and large numbers of employees Flexible and adaptable in challenging situations. What we can provide you: Medical, Dental, and Vision coverage eligibility on day 1 Flex Spending Accounts Health Savings Account 401(k) Volunteer Life Insurance options Critical Illness and Accident Insurance Tuition Reimbursement Programs Robust Employee Assistance Program Services Individualized Developmental Opportunities

Job Title: Production Technician Schedule: Full-Time | Monday-Friday, 7:00 AM - 3:30 PM or 3:30PM-12:00AM (occasional Saturdays required) Overview: We are seeking dependable and motivated individuals for full-time Production Technician roles in a fast-paced manufacturing environment. This position offers a comprehensive benefits package, monthly production bonuses, and paid time off for 11 federal holidays. If you're looking for more than just a paycheck and are ready to build a long-term career, this could be the opportunity for you.Key Responsibilities: Assemble and align precision components using specialized hand tools. Operate machinery for cutting, shaping, polishing, and finishing materials to exact specifications. Perform quality checks and visual inspections to identify defects or inconsistencies. Clean and prepare products for final packaging or next production stage using appropriate tools and solvents. Read and interpret work orders or technical instructions to determine requirements. Set up and calibrate production equipment based on detailed specifications. Monitor machine operations and make manual adjustments as needed to maintain quality standards. Conduct final measurements and inspections using precision instruments. Complete minor repairs or adjustments using small tools and equipment. Maintain a clean and organized work area in accordance with safety and operational standards. Training: On-the-job training provided; prior experience in manufacturing, production, or assembly is a plus but not required. Requirements: Must be at least 18 years of age. High School Diploma or GED required. Reliable transportation to and from work. Ability to read, write, and understand English. Strong attention to detail and hand-eye coordination. Comfortable performing repetitive tasks with accuracy and consistency. Ability to handle small tools and delicate components. Physical Requirements: Ability to lift up to 50 lbs occasionally. Frequent reaching, bending, kneeling, and crouching. Prolonged standing or sitting depending on task assignment. Ability to walk both short and extended distances within the facility. Manual dexterity for both gross and fine motor tasks. Good visual acuity (with or without corrective aid) and ability to distinguish colors. Additional Information: Veterans encouraged to apply. Pre-employment drug screen required. Job Types: Full-time, Temp-to-hire Pay: $13.00 - $15.00 per hour Benefits: Health insurance On-the-job training Opportunities for advancement Paid time off Referral program Schedule: 8 hour shift Day shift Monday to Friday Night shift Weekends as needed Supplemental Pay: Overtime pay

Boyd Gaming Corporation has been successful in gaming jurisdiction in which we operate in the United States and is one of the premier casino entertainment companies in the United States. Never content to rest upon our successes, we will continue to evolve and retain a position of leadership in our industry. Our past success, our current business philosophies and our sound business planning, combine to position Boyd Gaming Corporation to maximize value for our shareholders, our team members and our communities. Additional Information Boyd Gaming is proud to be an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state, or local protected class. Boyd Gaming is proud to be an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state, or local protected class.

Boyd Gaming Corporation has been successful in gaming jurisdiction in which we operate in the United States and is one of the premier casino entertainment companies in the United States. Never content to rest upon our successes, we will continue to evolve and retain a position of leadership in our industry. Our past success, our current business philosophies and our sound business planning, combine to position Boyd Gaming Corporation to maximize value for our shareholders, our team members and our communities. Additional Information Boyd Gaming is proud to be an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state, or local protected class. Boyd Gaming is proud to be an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state, or local protected class.

Taurus Industrial Group's Specialty Services division is seeking skilled and motivated Field Services Technicians to join our growing team. We provide advanced industrial solutions across power generation, petrochemical, refining, and manufacturing sectors. Our technicians are trusted partners to our clients, delivering precision work in bolting, torquing, machining, induction heating, line-stop, and related specialty field services. If you are a hands-on professional with technical acumen, a safety-first mindset, and the ability to thrive in challenging field environments, we want to hear from you. Key Responsibilities Perform on-site bolting, torquing, tensioning, and induction heating services on critical equipment. Support field machining, hot tapping, and line-stop operations as needed. Install, operate, troubleshoot, and maintain specialized tools and OEM induction equipment. Ensure all work adheres to safety, quality, and compliance standards. Interpret technical drawings, job packages, and client specifications. Collaborate with project managers, supervisors, and customer representatives to ensure timely, accurate, and efficient service delivery. Maintain, calibrate, and prepare rental and company-owned specialty equipment. Travel extensively to client facilities across regional and national assignments. Recommended Qualifications & Requirements Experience: Minimum 3-5 years in industrial services, mechanical maintenance, or specialty field service roles (power plants, refineries, petrochemical, or heavy industry preferred). Certifications/Training: NCCER, OSHA, or equivalent field qualifications (preferred). OEM training on induction heating or bolting/tensioning equipment (a plus). Technical Skills: Proficient in hydraulic, pneumatic, and electronic tool operation. Familiarity with torque/tension charts, machining tolerances, and mechanical fit-up. Physical Requirements: Ability to lift to 50 lbs, work at heights, and endure confined space conditions. Willingness to work extended shifts, nights, weekends, and travel on short notice. Soft Skills: Strong commitment to safety and quality. Clear communication and problem-solving skills. Team-oriented with the ability to adapt to dynamic field environments. Why Join Taurus Industrial Group? Competitive pay with overtime opportunities. Comprehensive benefits: health, dental, vision, 401(k), PTO. Professional training and advancement opportunities. Exposure to cutting-edge specialty service technologies and OEM equipment. Be part of a growing, innovative company that values technical excellence and field expertise. 📍 Locations: Nationwide travel, with primary needs in Texas, Gulf Coast, Northeast, Midwest, and Western U.S. BE SURE TO APPLY ON OUR WEBSITE: ****************

Upchurch is a rapidly growing, full-service building engineering company providing mechanical, plumbing, HVAC, and electrical services across the southeastern United States. Founded in 1970 and headquartered in Horn Lake, MS, Upchurch has grown through both organic expansion and strategic acquisitions, establishing a strong reputation for quality, reliability, and service excellence. We offer end-to-end solutions-from design and installation to ongoing maintenance and emergency support-helping clients maximize building performance, energy efficiency, and equipment lifespan. Position Summary The Lead Service Technician is the field lead for commercial service operations. This role performs advanced diagnostics and repairs, sets workmanship standards, mentors technicians/apprentices, and coordinates daily workflow with dispatch and project/service managers. The Lead ensures safety, quality, code compliance, and a positive customer experience while helping drive first‑time fix rates, reduced call‑backs, and profitable service work. Key Responsibilities Advanced Diagnostics & Repair Troubleshoot complex issues on plumbing/HVAC systems (water heaters/boilers, pumps, PRVs, backflows, hydronics; RTUs, split systems, controls) and perform code‑compliant repairs. Execute start‑ups, commissioning, and system performance tuning; verify setpoints and document results. Job Planning & Workflow Review work orders, scope, and site conditions; stage materials/parts; coordinate permits, shutdowns, LOTO, and access. Interface with dispatch to sequence calls, balance workloads, and minimize travel/return trips. Quality, Safety & Compliance Lead Job Hazard Analyses (JHAs) and toolbox talks; enforce OSHA/company safety rules (confined space, hot work, fall protection, electrical, ladder/scaffold). Ensure installations/repairs meet IPC/UPC/IFGC/IMC and manufacturer specifications; complete QA/QC checklists, pressure/hydrostatic tests, and photos. Customer Communication Communicate diagnostics, options, and estimates; gain approval for work; set realistic ETAs; capture follow‑up recommendations. Represent the company professionally onsite and in documentation. Documentation & Closeout Use the field app/CMMS to record labor, materials, serials, readings, and photos; submit redlines/as‑builts as needed. Ensure accurate parts usage and return/warranty processing; support 2‑/3‑way match with packing slips. Leadership & Mentoring Coach technicians/apprentices on diagnostics, code, and craftsmanship; provide ride‑alongs and skills check‑offs. Give input on scheduling, parts standards, truck stock, and training needs; support onboarding of new hires. Inventory & Tools Maintain truck/tool readiness; request replenishment proactively; care for specialty tools (press tools, analyzers, cameras, jetters, pumps, recovery machines, gauges). Minimum Qualifications Experience: 3+ years in commercial service (plumbing and/or HVAC) with advanced diagnostics; prior lead/mentor experience preferred. Licensure/Certs: Valid driver's license and acceptable MVR. State/city Journeyman or Master Plumber license and/or HVAC licenses as applicable. Backflow Tester/Repair (preferred). EPA 608 (for HVAC work), OSHA‑10/30, First Aid/CPR (preferred). Technical Skills: Solder/braze, press, thread, solvent weld; pump alignment; gas sizing/leak checks; combustion analysis; hydronic balancing; controls basics. Digital Skills: Proficient with mobile field apps/CMMS (e.g., ServiceTitan/ServiceTrade/FieldEdge), email, and photo documentation. Soft Skills: Clear communication, customer service, time management, and coaching mindset. Physical Requirements Lift/push/pull up to 75 lbs; prolonged standing, bending, kneeling; work on ladders, roofs, mechanical rooms, crawlspaces, and trenches. Work in varying temperatures and conditions; wear required PPE at all times. Benefits: Competitive salary based on experience. Health, dental, and vision insurance. Paid time off and holiday pay. Opportunities for professional development and certification assistance. Equal Employment Opportunity: Upchurch Companies provides equal employment opportunities to all employees and applicants. We prohibit discrimination and harassment of any type based on race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

R&P is looking for an experienced Marine Electrician / Technician II to fill a full-time position undertaking a variety of tasks relating to installing, repairing, and troubleshooting electrical and electronic equipment onboard U.S. Navy ships in Pascagoula, MS. This position will involve installing electrical cabling, building various electrical connectors, Installation of hardware and troubleshooting malfunctions in several different electrical and electronic systems. Due to the high amount of risk pertaining to this job, electricians must be first and foremost responsible individuals with great attention to safety precautions. The ideal candidate must also be experienced in different kinds of electrical devices and systems. Responsibilities Coordinate and execute plans of electrical installations for many different electrical and electronic systems such as lighting, announcing, 115VAC/440VAC/24DVC electrical plant equipment, Uninterrupted Power Supply equipment, Audio/Video equipment, Antenna systems and many others Install electrical cabinets, fixtures, and equipment for various electrical systems Install safety and distribution components (e.g., switches, resistors, circuit-breaker panels etc.) Connect wiring in electrical circuits and networks using various MIL-SPEC connectors Pull in cables of various lengths and sizes to accommodate system connections Perform effective troubleshooting to identify hazards or malfunctions and repair/replace damaged equipment Install, tag and band copper cables on various classes of Navy surface vessels. Performing all duties required to layout, fabricate, and install electrical wiring, coaxial cable, onboard Navy vessels. Troubleshooting and testing of copper cables and circuits. Possess skills and abilities to perform the requirements of a shipboard or airframe electrician's trade with little supervision or guidance. Knowing how to read and interpret drawings, specifications, technical manuals, design notices, etc. Knowing and understanding the use of all tools of their trade such as multi-meters, pin crimper's, soldering and expected to accomplish the more complex tasks associated with electrical installation of cable, military circular connectors, panel box and power terminations, etc. Familiar with basic computer skills Familiar with MS-Office programs including Word and Excel. Perform other duties as required which may include, but is not limited to, grinding, chipping, surface prep, and foundation installations Qualifications Must be a Marine Electrician with a minimum of 3-5 years relevant experience working in ship repair onboard US Navy ships (technical education may be substituted for a portion of the experience requirement) Must have experience and multi-pin copper connector certification of cables per Navy Standard Item 009-73 (MIL-STD-2003-5) Familiarity with NAVY Standard Items preferred Ability to read, understand and follow customer work item requirements, drawings, and wiring diagrams. Individual must have a keen attention to detail and be quality metric driven Must be a US citizen with the ability to obtain/maintain a DoD Secret security clearance (current active Secret clearance is a plus). Successful completion of Navy “A” School (“C” School is a plus) or successful completion of a Shipyard or commercial Electrical apprenticeship program (recognized shipyard apprentice graduates are a plus). Secret DOD security Clearance preferred Proven experience as an electrician Experience in marine electrical systems Demonstrable ability to use electrical and hand tools (e.g. wire strippers, voltmeter etc) Demonstrate ability to build MIL-SPEC connectors of various types and sizes using both soldering and crimping techniques Ability to read and understand electrical and installation drawings and blueprints Excellent critical thinking and problem-solving ability Excellent physical condition with the ability to lift 50 pounds on your own Willingness to work 2nd shift and weekends if necessary Willingness to travel to various locations in support of ship maintenance availabilities Flexibility with regards to scheduling and planned support due to changes in Navy or shipyard schedules Thorough knowledge of safety procedures and guidelines EEO Statement R&P Technologies provides equal opportunity for all persons and prohibits discrimination in employment because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability (including pregnancy, childbirth or related medical conditions), veteran or marital status, or any other factor prohibited by law. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leave, compensation, and training. R&P maintains an Affirmative Action Plan to establish fair access to employment opportunities and to create a work community that is an accurate reflection of the qualified workforce. Due to security clearance requirements, U.S. citizenship is required for most positions Salary R&P offers a highly competitive compensation package that includes contributions towards health insurance, 401(k) matching, and other non-salary benefits.

AdaptHealth Opportunity - Apply Today! At AdaptHealth we offer full-service home medical equipment products and services to empower patients to live their best lives - out of the hospital and in their homes. We are actively recruiting in your area. If you are passionate about making a profound impact on the quality of patients' lives, please click to apply, we would love to hear from you. Medical Equipment Technician Medical Equipment Technicians are responsible for ensuring safe delivery, providing setup, and education in usage of home medical equipment for our customers. Setup is done in their home, long-term care setting, clinic or any location deemed necessary to service patients. Job Duties: Develop and maintain working knowledge of current HME products and services offered by the company and all applicable governmental regulations. Comply with all applicable company policies and procedures. Educate customers in proper use and care of respiratory and HME equipment in a home setting. Complete required documentation following equipment setup, delivery or pickups as required. Assist with customer equipment problems under emergency conditions. Process all orders in a timely, accurate manner. Promote services and products to referral sources in the community as appropriate. Develop basic reimbursement knowledge and completely document all information necessary to ensure reimbursement for all appropriate equipment, products, and services. Assist with implementation of quality improvement program to meet company policies. Maintain home oxygen systems through regularly scheduled visits to customers. Safely drive and maintain company vehicle. Perform patient assessment and re-assessment for patient care. Perform routine preventative maintenance and simple repairs on equipment as required in accordance with company policies. Report equipment hazards and/or product incidents as required in accordance with company policies and procedures. Develop and maintain working knowledge of current HME products and services offered by the company. Assume on-call responsibilities during non-business hours in accordance with company policy. Retain knowledge of and consistently adhere to procedures for the use of Personal Protective Equipment (PPE), infection control and hazardous materials handling. Maintain patient confidentiality and function within the guidelines of HIPAA. Completes assigned compliance training and other educational programs as required. Maintains compliant with AdaptHealth's Compliance Program Responsible for cleaning equipment when assigned by supervisor or down time allows, following the Branch Maintenance and Cleaning Guidelines Perform other related duties as assigned. Requirements Minimum Job Qualifications: High School Diploma or equivalency Entry level sales, customer service background essential One (1) year of Military, delivery driver with sales component or health care technician experience would be considered related experience and preferred. Senior level requires two (2) years of work-related experience and one (1) year of exact job experience. Valid and unrestricted driver's license in the state of residence Physical Demands and Work Environment: Must be able to regularly lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Must be able to stretch, bend, stoop and crouch and perform moderate to heavy physical labor while moving equipment and supplies. Subject to long periods of sitting and driving. Work environment may be stressful at times, as overall work activities and work levels fluctuate. May be exposed to unsanitary conditions in some home settings. May be exposed to hazardous materials, loud noise, extreme heat/cold, direct, or indirect contact with airborne, bloodborne, and/or other potentially infectious pathogen. May be exposed to high crime areas within the service community. Must be able to drive independently and travel as needed. May be exposed to angry or irate customers. Must be able to access the patient's residence without assistance. Mental alertness to perform the essential functions of position. Ability to effectively communicate both verbally and written with customers with the ability to demonstrate empathy, compassion, courtesy, and respect for privacy. AdaptHealth is an equal opportunity employer and does not unlawfully discriminate against employees or applicants for employment on the basis of an individual's race, color, religion, creed, sex, national origin, age, disability, marital status, veteran status, sexual orientation, gender identity, genetic information, or any other status protected by applicable law. This policy applies to all terms, conditions, and privileges of employment, including recruitment, hiring, placement, compensation, promotion, discipline, and termination. Salary Description $16-17/HR

R&P Technologies is looking for Master technical skills and waterfront knowledge under supervision of a Lead Technician Level IV. Provide training to Technician Level II and I personnel. They are responsible for reporting all task completions and production obstacles to their Lead Technician and will be capable of standing in as Lead Technician when required. Ensure that all work performed is in accordance with ship specification requirements while complying with all OSHA, NAVSEA, ABS, local shipyard, and R&P safety policies and procedures. Execute plans of electrical installations to include, but not limited to 115VAC/440VAC/Various VDC equipment, fiber optics, lighting, announcing, RF antennas, audio/video, interior communications and alarms, and network systems. They will operate efficiently in a team environment and demonstrate effective leadership qualities while dealing with junior personnel. Receive mentorship/guidance from Lead Technician or Task Lead for questions on any assigned tasks that are not fully understood. Responsibilities * Execute plans of electrical installations for many different electrical and electronic systems such as lighting, announcing, 115V/440V electrical plant equipment, Uninterrupted Power Supply equipment, Audio/Video equipment, Antenna systems and many others * Install electrical cabinets, fixtures, and equipment for various electrical systems * Install safety and distribution components (e.g., switches, resistors, circuit-breaker panels etc.) * Connect wiring in electrical circuits and networks using various MIL-SPEC connectors * Pull in cables of various lengths and sizes to accommodate system connections * Perform effective troubleshooting to identify hazards or malfunctions and repair/replace damaged equipment * Potentially run shipboard availabilities with a small crew. * Learn Microsoft Office, Microsoft Project, and Adobe Acrobat DC. Qualifications * Must be a Marine Electrician with a minimum of 3-5 years relevant experience working in ship repair onboard US Navy ships (technical education may be substituted for a portion of the experience requirement) * Must have experience and multi-pin copper connector certification of cables per Navy Standard Item 009-73 (MIL-STD-2003-5) * Must be familiar with NAVY Standard Items * Ability to read, understand and follow customer work item requirements, drawings, and wiring diagrams. * Individual must have a keen attention to detail and be quality metric driven * Must be a US citizen with the ability to obtain/maintain a DoD Secret security clearance (current active Secret clearance is a plus). * Fluency in English (verbal and written) * Successful completion of Navy "A" School ("C" School is a plus) or successful completion of a Shipyard or commercial Electrical apprenticeship program (recognized shipyard apprentice graduates are a plus). * Secret DOD security Clearance preferred * Must have experience and multi-pin copper connector certification of cables per Navy Standard Item 009-73 (MIL-STD-2003-5) * Shipyard competent person certification a plus * Proven experience as an electrician * Experience in marine electrical systems * Prior experience supervising other personnel * Demonstrable ability to use electrical and hand tools (e.g. wire strippers, voltmeter etc.) * Demonstrate ability to build MIL-SPEC connectors of various types and sizes using both soldering and crimping techniques * Ability to read and understand electrical and installation drawings and blueprints * Excellent critical thinking and problem-solving ability * Excellent physical condition with the ability to lift 50 pounds on your own * Willingness to travel to various locations in support of ship maintenance availabilities * Flexibility with regards to scheduling and planned support due to constant Navy movement * Thorough knowledge of safety procedures and guidelines * Valid Security Clearance, or the ability to qualify and maintain one EEO Statement R&P Technologies provides equal opportunity for all persons and prohibits discrimination in employment because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability (including pregnancy, childbirth or related medical conditions), veteran or marital status, or any other factor prohibited by law. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leave, compensation, and training. R&P maintains an Affirmative Action Plan to establish fair access to employment opportunities and to create a work community that is an accurate reflection of the qualified workforce. Due to security clearance requirements, U.S. citizenship is required for most positions Salary R&P offers a highly competitive compensation package that includes contributions towards health insurance, 401(k) matching, and other non-salary benefits. Exact salary will be commensurate with experience and qualifications. Qualifications Secret

Looking for a New Challenge? We've Got One at Altrad Sparrows! Altrad Sparrows, a part of Altrad Group, is a global provider of specialist engineering, inspection, operations and maintenance services to the offshore energy, renewables and industrial markets. Our solutions support our clients to optimize their efficiency by ensuring the performance, reliability and safety of critical equipment and people. With our headquarters in France, we employ over 52,000 people across numerous operational locations within the Americas, Europe, Middle East, Africa and Asia Pacific. Position: Offshore/Onshore Hydraulics Technician Main Purpose: The Hydraulic Technician will perform hydraulic crane field services and act as the Company Representative for the crane product line. MAIN RESPONSIBILITIES: Inspect, troubleshoot and repair cranes - hydraulic and closed loop experience or electric. Ability to completely overhaul winches, valves, diesel engines and hydraulic components. Ability to build and repair hydraulic and electric pipe tension systems, assemble hydraulic and pneumatic valve bodies, and rebuild hydraulic pumps, motors and cylinders. Carry out preventative maintenance programs. General refurbishment/repair of all hydraulic components and complete disassembly/test reports. Inspection of disassembled components to determine suitability for use in line with manufacturers drawings/tolerances. Rebuilt and assist in testing of refurbished units as required. Cleaning and preparation of components prior to rebuild. Be available and flexible in assisting in other workshop activities as workloads dictate. Be responsible for the clean and safe area of work and surroundings. Understand and comply with all Safety and Environmental requirements. Perform all other duties as required by Supervisor within the physical constraints of the job. REQUIRED SKILLS: Mechanical, hydraulic, and diesel experience. Repair skills. Knowledge of proper crane rigging procedures. Good driving record. Ability to perform tasks independently. Thorough knowledge of API2C, RP2D, and 9A Specifications. Troubleshooting hydraulic systems. Ability to read and interpret schematics. Rebuilding open and closed loop piston pumps, vane and gear pumps. Good communication and organizational skills. Team skills and ability to work independently or as part of a team. Computer literacy, including Microsoft Office and Excel. Rebuilding all types of cylinders. Ownership of hand tools. Experience with hydraulic components, including cylinders, pumps, motors, and gearbox repairs. WE OFFER: A Commitment to Excellence: We support the global energy industry by optimizing the performance, reliability, and safety of critical equipment and people through our engineered products and services. Growth Opportunities: As a leading energy services contractor, we provide high-quality specialist equipment and integrated engineering services, ensuring our employees are part of a growing and dynamic team. Core Values: We foster a workplace built on Respect, where everyone is valued; Solidarity, promoting teamwork and collaboration; Courage, encouraging innovative thinking; Humility, embracing diverse perspectives; and Conviviality, creating a positive and inclusive environment. Benefits: 401(k) 401(k) matching Dental insurance Health insurance Life insurance Paid time off Referral program Retirement plan Vision insurance All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. LI-TF1 **Candidates applying for U.S. based positions must have the legal right to work in the U.S. without sponsorship** Altrad Sparrows is an EEO Employer - M/F/Disability/Protected Veteran Status View all jobs at this company

An Electronic Technician lay's out, builds, tests, installs, troubleshoots, repairs and modifies electrical and electronic components, parts, equipment and systems. * Possess in-depth knowledge of electrical/electronic systems and components, to include associated command and surveillance systems. * 5 years of experience as an Electronic Technician. * Able to read and interpret drawing, schematics and other electrical/electronic technical documentation. * Familiar with applicable commercial and Government specifications and codes. * Have comprehensive knowledge at component/system start up, testing, troubleshooting and repair. * Able to check functioning of newly installed equipment in vessels and structures to evaluate system performance under actual operating conditions.

An Electronic Technician lay's out, builds, tests, installs, troubleshoots, repairs and modifies electrical and electronic components, parts, equipment and systems. Possess in-depth knowledge of electrical/electronic systems and components, to include associated command and surveillance systems. 5 years of experience as an Electronic Technician. Able to read and interpret drawing, schematics and other electrical/electronic technical documentation. Familiar with applicable commercial and Government specifications and codes. Have comprehensive knowledge at component/system start up, testing, troubleshooting and repair. Able to check functioning of newly installed equipment in vessels and structures to evaluate system performance under actual operating conditions.

Ocean Springs Hospital | Part-Time | 7 PM | 3109 Bienville Blvd Ocean Springs, Mississippi, 39564 United States The Obstetrical Technician provides basic nursing care (personal and restorative care) and functions as a member of the surgical team by assisting and passing instruments during surgical procedures performed in the Labor and Delivery unit. He/She understands the procedures being performed and anticipates the needs of the surgeon. The OB Technician ensures quality patient care during the operative procedure and is constantly on vigil for maintenance of the sterile field. He/She assists in the preparation of the room before surgery or delivery and is accountable for all items required for their surgical table, including all required instrumentation and sutures. The Obstetrical Technician preforms routine clerical duties as needed within the unit. The Obstetrical Technician performs duties under the direct supervision of a Registered Nurse. DISCLAIMER: This is not necessarily an exhaustive list of all responsibilities, duties, skills, efforts, requirements or working conditions associated with the job. While this is intended to be an accurate reflection of the current job, management reserves the right to revise the job or to require that other or different tasks be performed as assigned. Education High School graduate or equivalent required. Successful completion of Surgical Technician program preferred. License N/A Certification Current Surgical Technologist Certification preferred. Must complete and maintain BCLS certification upon hire and/or transfer. Must have de-escalation training completed by the end of position orientation (90 days); must have appropriate level of de-escalation training. Experience A minimum of one (1) year Surgical Technologist experience preferred. Reports to: Registered Nurse responsible for patient care management during scheduled shift as well as the Patient Care Manager on a 24 hours basis. Supervises: None Physical Demands Work is moderately active: involves sitting with frequent requirements to move about the office, move about the facility, and to travel to another facility within the SRHS service area. Work involves exerting a negligible amount of force frequently to lift, carry, push, pull, or otherwise move objects, including the human body. Work involves using many physical motions in performing daily work activities; subject to exposure of body fluids, sputum and tissues, which may carry the hazard of infectious disease. Work involves using repetitive motions: substantial movements of the wrists, hands, and or fingers while operating standard office equipment such as computer keyboard. Work involves being able to perceive the nature of sound at normal speaking levels with or without correction; the ability to make fine discriminations in sound. Work requires close visual and acuity and the ability to adjust the eye to bring an object into sharp focus, i.e. shift gaze from viewing a computer monitor to forms/printed material that are closer to compare data at close vision. Must be able to be active for extended periods of time without experiencing undue fatigue. Must be able to work schedules assigned with the understanding that changes may be instituted according to the needs of the hospital for off days, shifts or weekends. Mental Demands Must demonstrate keen mental faculties/assessment and decision making abilities. Must demonstrate superior communication/speaking/enunciation skills to receive and give information in person and by telephone. Must demonstrate strong written and verbal communication skills. Must possess emotional stability conducive to dealing with high stress levels. Must demonstrate ability to work under pressure and meet deadlines. Attention to detail and the ability to multi-task in complex situations is required. Must have the ability to maintain collaborative and respectable working relationships throughout SRHS and other organizations. Special Demands: Must possess superior customer service skills and professional etiquette. Must possess proficient knowledge and ability to use a computer (must be keyboard proficient) and other office technology (i.e., telephone, fax, etc.), MS Outlook and Word. Must be able to demonstrate appropriate clinical judgment and apply appropriate professional skills to a patient population of all ages. Job requires traveling throughout the SRHS service area - with the employee providing his/her own transportation.

Experience needed for full time bodyman. Local established shop, owner operated. M_F 8am-5pm. Must have your own tools. Tear down collision work, change parts, frame, work body filler, welding. Commission pay weekly, up to 100,000 income yearly. Vacation and holiday pay. Preferred qualifications: Legally authorized to work in the United States 16 years or older

Inspects, tests, adjusts, and repairs electric, electronic, mechanical, and pneumatic instruments and systems utilized by production and manufacturing equipment to ensure adherence to established performance levels and product quality. RESPONSIBILITIES - Inspects meters, indicators, and gauges to detect abnormal fluctuations. - Tests accuracy of flow meters, pressure gauges, temperature indicators, controllers, radiation counters or detectors, and other recording, indicating or controlling instruments to locate defective components in system, using test equipment, such as pressure gauges, mercury manometers, potentiometers, pulse and signal generators, oscilloscopes, transistor curve tracers, and ammeters, voltmeters, and watt-meters. - Traces out and tests electronic solid state and vacuum tube circuitry and components to locate defective parts in analog and digital, protection, or radiation monitoring systems, using test equipment, schematics, and maintenance manuals. - Removes defective instruments from system, decontaminates, disassembles, and cleans instruments, and replaces defective parts, using hand tools. - Reassembles instruments and replaces instruments in system, using hand tools. - Lubricates instruments and replaces defective wiring and tubing. - Calibrates readings on instruments according to standards and adjusts phasing and aligns stages to ensure accuracy of recording and indicating function. - Records calibrations made, parts and components used, and inventory of parts on hand. - Prepares schematic drawings, sketches, and reports to reflect changes or alterations made in instruments. - Responsible for observing and complying with all safety and project rules. Performs other duties as required.

R&P is looking for an experienced Marine Electrician / Technician II to fill a full-time position undertaking a variety of tasks relating to installing, repairing, and troubleshooting electrical and electronic equipment onboard U.S. Navy ships in Pascagoula, MS. This position will involve installing electrical cabling, building various electrical connectors, Installation of hardware and troubleshooting malfunctions in several different electrical and electronic systems. Due to the high amount of risk pertaining to this job, electricians must be first and foremost responsible individuals with great attention to safety precautions. The ideal candidate must also be experienced in different kinds of electrical devices and systems. Responsibilities * Coordinate and execute plans of electrical installations for many different electrical and electronic systems such as lighting, announcing, 115VAC/440VAC/24DVC electrical plant equipment, Uninterrupted Power Supply equipment, Audio/Video equipment, Antenna systems and many others * Install electrical cabinets, fixtures, and equipment for various electrical systems * Install safety and distribution components (e.g., switches, resistors, circuit-breaker panels etc.) * Connect wiring in electrical circuits and networks using various MIL-SPEC connectors * Pull in cables of various lengths and sizes to accommodate system connections * Perform effective troubleshooting to identify hazards or malfunctions and repair/replace damaged equipment * Install, tag and band copper cables on various classes of Navy surface vessels. * Performing all duties required to layout, fabricate, and install electrical wiring, coaxial cable, onboard Navy vessels. * Troubleshooting and testing of copper cables and circuits. * Possess skills and abilities to perform the requirements of a shipboard or airframe electrician's trade with little supervision or guidance. * Knowing how to read and interpret drawings, specifications, technical manuals, design notices, etc. * Knowing and understanding the use of all tools of their trade such as multi-meters, pin crimper's, soldering and expected to accomplish the more complex tasks associated with electrical installation of cable, military circular connectors, panel box and power terminations, etc. * Familiar with basic computer skills * Familiar with MS-Office programs including Word and Excel. * Perform other duties as required which may include, but is not limited to, grinding, chipping, surface prep, and foundation installations Qualifications * Must be a Marine Electrician with a minimum of 3-5 years relevant experience working in ship repair onboard US Navy ships (technical education may be substituted for a portion of the experience requirement) * Must have experience and multi-pin copper connector certification of cables per Navy Standard Item 009-73 (MIL-STD-2003-5) * Familiarity with NAVY Standard Items preferred * Ability to read, understand and follow customer work item requirements, drawings, and wiring diagrams. * Individual must have a keen attention to detail and be quality metric driven * Must be a US citizen with the ability to obtain/maintain a DoD Secret security clearance (current active Secret clearance is a plus). * Successful completion of Navy "A" School ("C" School is a plus) or successful completion of a Shipyard or commercial Electrical apprenticeship program (recognized shipyard apprentice graduates are a plus). * Secret DOD security Clearance preferred * Proven experience as an electrician * Experience in marine electrical systems * Demonstrable ability to use electrical and hand tools (e.g. wire strippers, voltmeter etc) * Demonstrate ability to build MIL-SPEC connectors of various types and sizes using both soldering and crimping techniques * Ability to read and understand electrical and installation drawings and blueprints * Excellent critical thinking and problem-solving ability * Excellent physical condition with the ability to lift 50 pounds on your own * Willingness to work 2nd shift and weekends if necessary * Willingness to travel to various locations in support of ship maintenance availabilities * Flexibility with regards to scheduling and planned support due to changes in Navy or shipyard schedules * Thorough knowledge of safety procedures and guidelines EEO Statement R&P Technologies provides equal opportunity for all persons and prohibits discrimination in employment because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability (including pregnancy, childbirth or related medical conditions), veteran or marital status, or any other factor prohibited by law. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leave, compensation, and training. R&P maintains an Affirmative Action Plan to establish fair access to employment opportunities and to create a work community that is an accurate reflection of the qualified workforce. Due to security clearance requirements, U.S. citizenship is required for most positions Salary R&P offers a highly competitive compensation package that includes contributions towards health insurance, 401(k) matching, and other non-salary benefits. Qualifications Secret

Singing River Gulfport | Part-Time | MIDS/PRN | 15200 Community Road Gulfport, Mississippi, 39503 United States The Diversified Technician provides basic nursing care (i.e. personal and restorative care) to patients according to predefined guidelines; a plan of care established by a Registered Nurse, and under the direct supervision of the Registered Nurse; the CDC Guidelines for Infection Control; and Singing River Health System Department of Nursing Plan for Provision of Care, Treatment and Services. He/She functions as a member of the nursing unit team by performing routine clerical and receptionist duties as designated by the Nurse Manager, Patient Care Coordinator or Registered Nurse. DISCLAIMER: This is not necessarily an exhaustive list of all responsibilities, duties, skills, efforts, requirements or working conditions associated with the job. While this intends to be an accurate reflection of the current job, management reserves the right to revise the job or to require that other or different tasks performed as assigned. Education: Must be a high school graduate or equivalent. Graduate from a Certified Nurse Aide (CNA) program preferred. Hospital / healthcare experience and/or on the job training may be accepted in lieu of formal education. License: N/A Certifications: Certified in Mississippi as a Nursing Assistant preferred. Must complete and maintain BCLS certification upon hire and/or transfer. Must have de-escalation training completed by the end of position orientation (90 days); must have appropriate level of de-escalation training. Experience: Nursing Assistant experience preferred. Experience working in an Emergency Department preferred. Must have equivalent combination of education and/or experience from which comparable knowledge, skills and abilities have been achieved. Reports to: Patient Care Coordinator Supervises: None Physical Demands: Work is moderately active: involves sitting with frequent requirements to move about the office, move about the facility, and to travel to another facility within the SRHS service area. Work involves exerting a negligible amount of force frequently to lift, carry, push, pull, or otherwise move objects, including the human body. Work involves using many physical motions in performing daily work activities; subject to exposure of body fluids, sputum and tissues, which may carry the hazard of infectious disease. Work involves using repetitive motions: substantial movements of the wrists, hands, and or fingers while operating standard office equipment such as computer keyboard. Work involves being able to perceive the nature of sound at normal speaking levels with or without correction; the ability to make fine discriminations in sound. Work requires close visual and acuity and the ability to adjust the eye to bring an object into sharp focus, i.e. shift gaze from viewing a computer monitor to forms/printed material that are closer to compare data at close vision. Must be able to be active for extended periods of time without experiencing undue fatigue. Must be able to work schedules assigned with the understanding that changes may be instituted according to the needs of the hospital for off days, shifts or weekends. Mental Demands: Must demonstrate keen mental faculties/assessment and decision making abilities. Must demonstrate superior communication/speaking/enunciation skills to receive and give information in person and by telephone. Must demonstrate strong written and verbal communication skills. Must possess emotional stability conducive to dealing with high stress levels. Must demonstrate ability to work under pressure and meet deadlines. Attention to detail and the ability to multi-task in complex situations is required. Must have the ability to maintain collaborative and respectable working relationships throughout SRHS and other organizations Special Demands: Must possess superior customer service skills and professional etiquette. Must possess proficient knowledge and ability to use a computer (must be keyboard proficient) and other office technology (i.e., telephone, fax, etc.), MS Outlook and Word. Must be able to demonstrate appropriate clinical judgment and apply appropriate professional skills to a patient population of all ages.

Inspects, tests, adjusts, and repairs electric, electronic, mechanical, and pneumatic instruments and systems utilized by production and manufacturing equipment to ensure adherence to established performance levels and product quality. RESPONSIBILITIES * Inspects meters, indicators, and gauges to detect abnormal fluctuations. * Tests accuracy of flow meters, pressure gauges, temperature indicators, controllers, radiation counters or detectors, and other recording, indicating or controlling instruments to locate defective components in system, using test equipment, such as pressure gauges, mercury manometers, potentiometers, pulse and signal generators, oscilloscopes, transistor curve tracers, and ammeters, voltmeters, and watt-meters. * Traces out and tests electronic solid state and vacuum tube circuitry and components to locate defective parts in analog and digital, protection, or radiation monitoring systems, using test equipment, schematics, and maintenance manuals. * Removes defective instruments from system, decontaminates, disassembles, and cleans instruments, and replaces defective parts, using hand tools. * Reassembles instruments and replaces instruments in system, using hand tools. * Lubricates instruments and replaces defective wiring and tubing. * Calibrates readings on instruments according to standards and adjusts phasing and aligns stages to ensure accuracy of recording and indicating function. * Records calibrations made, parts and components used, and inventory of parts on hand. * Prepares schematic drawings, sketches, and reports to reflect changes or alterations made in instruments. * Responsible for observing and complying with all safety and project rules. Performs other duties as required. SUMMARY Inspects, tests, adjusts, and repairs electric, electronic, mechanical, and pneumatic instruments and systems utilized by production and manufacturing equipment to ensure adherence to established performance levels and product quality. RESPONSIBILITIES * Inspects meters, indicators, and gauges to detect abnormal fluctuations. * Tests accuracy of flow meters, pressure gauges, temperature indicators, controllers, radiation counters or detectors, and other recording, indicating or controlling instruments to locate defective components in system, using test equipment, such as pressure gauges, mercury manometers, potentiometers, pulse and signal generators, oscilloscopes, transistor curve tracers, and ammeters, voltmeters, and watt-meters. * Traces out and tests electronic solid state and vacuum tube circuitry and components to locate defective parts in analog and digital, protection, or radiation monitoring systems, using test equipment, schematics, and maintenance manuals. * Removes defective instruments from system, decontaminates, disassembles, and cleans instruments, and replaces defective parts, using hand tools. * Reassembles instruments and replaces instruments in system, using hand tools. * Lubricates instruments and replaces defective wiring and tubing. * Calibrates readings on instruments according to standards and adjusts phasing and aligns stages to ensure accuracy of recording and indicating function. * Records calibrations made, parts and components used, and inventory of parts on hand. * Prepares schematic drawings, sketches, and reports to reflect changes or alterations made in instruments. * Responsible for observing and complying with all safety and project rules. Performs other duties as required.