Technician jobs in Cary, NC - 1,884 jobs

The Cable Technician is responsible for installing, maintaining, and troubleshooting structured cabling systems to support voice, data, video, and network communications. This role ensures all cabling infrastructure is installed to industry standards, project specifications, and customer requirements while maintaining safety and quality at all times. Key Responsibilities Installation & Cabling Work Install, terminate, and test copper (Cat5e, Cat6, Cat6A) and fiber optic cabling systems. Pull, label, route, and dress cables in commercial, industrial, and data center environments. Install cable trays, J-hooks, ladder racks, racks, patch panels, and related infrastructure hardware. Perform fiber splicing, connector installation, and end-to-end certification. Install network equipment including switches, wireless access points, and telecom room hardware as directed. Testing & Troubleshooting Conduct continuity, performance, and certification testing using Fluke or similar testers. Diagnose and resolve cable faults, signal loss, and connection issues. Perform repairs and upgrades to existing cabling systems with minimal downtime. Documentation & Compliance Complete detailed daily job reports, cable logs, labeling documentation, and test results. Ensure all cabling meets BICSI, NEC, and manufacturer standards. Qualifications 1-3+ years of structured cabling or low-voltage installation experience preferred. Knowledge of copper and fiber standards, cabling best practices, and industry tools. Ability to read and interpret blueprints, floor plans, and cable layouts. Experience with cable testing equipment (Fluke DSX, OTDR, light meters). Familiarity with LOTO, ladder safety, PPE, confined spaces, and general construction safety. Strong troubleshooting and problem-solving skills. Ability to lift 50+ lbs, work on ladders, and work in overhead or crawl spaces. Valid driver's license and reliable transportation. Preferred Certifications BICSI Installer 1 or Installer 2 (Copper or Fiber) OSHA 10 or OSHA 30 Manufacturer-specific cabling certifications (e.g., Commscope, Panduit)

Role: Maintenance Engineering Technician (PLC Programming) Industrial Maintenance experience in a manufacturing environment or equipment installation and debugging experience Experience with Electrical and/or mechanical systems in an industrial manufacturing environment Technical experience with PLCs in programming, including read, write and modify logic Technical experience with Servo Motion Controllers Technical experience with relay logic including wiring and troubleshooting Technical experience with Robotics including programming and troubleshooting. Experience with Hydraulic or Pneumatic troubleshooting and schematic reading Availability to work overtime, holidays, weekends, and shutdowns Ability for business travel, both domestic and international - up to 30%. Added bonus if you have: Technical associate degree or higher or equivalent experience Experience in Pre-Production set up Experience with Production Processes including Standardized Work (STW) and Job Instruction Sheets (JIS) Experience gathering and analyzing quality data from multiple sources New plant or facility startup experience Experience with high volume production in a clean room environment

Job Title: Facilities Technician Company: AISIN North Carolina Department: Facilities The Facilities Technician is responsible for providing electrical and mechanical support to the plant facilities. This role troubleshoots and maintains industrial manufacturing facilities equipment as well as the outdoor grounds of the facility. Position Responsibilities The incumbent is expected to perform the following functions that the company has determined are essential to this position: Handle industrial electrical issues including changing light bulbs and working with 208, 277, 480-volt, 3 phase and 120-volt, single phase equipment. Install, repair, and troubleshoot industrial piping systems along with the ability to change out pumps and motors. Troubleshoot to determine malfunctions on equipment using knowledge of microprocessors, programmable controllers, and circuit analysis. Troubleshoot AC & DC Systems up to 480 volts. Record maintenance and repairs activities in a computer-based maintenance management system, fill out utility check sheets and other required check sheets. Run Wastewater treatment system. Check operating status of air compressors. Execute plumbing repairs such as clearing clogged fixtures, drains, and adjusting leaks. Clean out clogged pumps in the sump pumps system as well as troubleshoot and adjust level controls in the system. Repair manual and automatic doors, hinges, locks, and closers on personal doors. Make repairs to dock equipment and the well system. Review equipment check sheets for abnormal readings. Lead Team Members in light fixture replacement. Ensure that restrooms are in good working order. Identify and repair building issues. Assist in making safety related kaizens and repairs. Plan and implement Kaizens. Required Skills and Abilities Essential Skills and Experience: 2 or more years of experience in industrial maintenance. Knowledge of electrical equipment - 480/230v 3ph, 110&24 vdc controls, prints and schematics. Knowledge of hydraulics and pneumatics. Knowledge of Plant Fire Sprinkler Systems. Ability to reset faults in the following systems and equipment: ATF Supply System, Crane Systems, Fluid Coolers, Air Compressors. Ability to safely operate industrial moving equipment such as a scissor lift, forklift, and other equipment. Ability to troubleshoot and correct faults on Wastewater System. Electrical skills. Mechanical - general knowledge of machines, tools, measurement instruments, automation/robotics, maintenance, and repair. Repairing - repairing machines or systems using the necessary tools. Equipment Maintenance - performing routine maintenance on equipment and determining when and what kind of maintenance is needed. Equipment Selection - determining the kind of tools and equipment needed to do a job. Math Skills - basic knowledge of mathematics. Education/Training/Certifications Associate degree in Electrical or Industrial Maintenance preferred. Travel Requirements Approximately 0 % Must be willing and available to travel to such locations and with such frequency as is necessary and desirable to meet business needs. Work Environment Requirements With reasonable accommodation: Must be able to operate a personal computer, telephone, and other office equipment. Must perform job duties onsite, when necessary, except those duties that are customarily or by their nature performed offsite (for example, offsite customer visits). Must be able to work effectively in a fast-paced environment. Must be able to work on multiple assignments at once, and complete assignments within deadline and budget (if applicable) with satisfactory quality. Must be able to operate as an effective team member. Must be committed to a high standard of safety and be willing and able to comply with all safety laws and all company safety policies. Attendance/Work Hour Requirements Must maintain an acceptable attendance record. Must be willing and available to work weekends and holidays as necessary and desirable to meet business needs.

Role Description This is a full-time hybrid role for a Breaker Shop Technician based in Burlington, NC, with some flexibility for remote work. Responsibilities include conducting routine maintenance and repair of electrical breakers and heavy equipment, diagnosing and troubleshooting equipment issues, and operating tools and machinery safely. The role also involves collaborating with team members and supporting warehouse operations when needed. Qualifications Knowledge and experience in Maintenance & Repair of electrical breakers, heavy equipment, and mechanical systems Proficiency in Troubleshooting and problem-solving technical equipment issues Skill in Forklift Operation and handling other heavy machinery safely Strong Communication skills to collaborate with team members and report on work progress Ability to work in a dynamic environment with a focus on safety, attention to detail, and efficiency Previous experience working with breakers and/or industrial equipment is preferred but not required High school diploma or equivalent; technical certifications

Rangam is seeking candidates for a Direct Hire role as a Bioprocess Technician III and IV with our client Pfizer, one of the world's largest pharmaceutical companies. Seeking candidates in Sanford, NC *This position is being offered as part of a disability/neurodiversity hiring program which is designed to provide a more inclusive and supportive hiring process and work environment for job seekers with physical and cognitive disabilities, which includes, but is not limited to autism, ADD/ADHD, PTSD, OCD, Anxiety Disorder, Dyslexia, Bipolar, and Tourette's Syndrome* What You Will Achieve In this role, you will: Executes manufacturing operations on the production floor for buffer/media make-up tanks, glass washers, autoclaves, bioreactors / fermenters, filtration equipment, inoculum preparation, chromatography skids and/or UF/DF skids with varying levels of automation. Follow SOPs and batch records for unit operations Supports operation of manufacturing equipment and issue resolution associated with process equipment commissioning, qualification and validation. Drives troubleshooting, technical support/analysis and resolution of equipment, automation, and process issues on the manufacturing floor. Drives for Right first time and continuous improvement execution, the timely review of daily documentation and completes data entry; Identify and/or Communicate process and compliance concerns in real time. Supports audits and observation improvements. Collaborates with the Subject Matter Expert for manufacturing operations in support of QTS investigations and CAPA implementations. Responsible for remaining current on assigned training. Implements Lean Manufacturing, Sustainability, Operational Excellence initiatives; facilitate the drive towards continuous improvement in all manufacturing areas. Collaborates in the escalation process through various levels of management when operations, personnel safety, equipment functionality, product supply and/or quality compliance are at risk. Ensures work requests are generated when issues arise with facility / manufacturing equipment. Proficient in enterprise systems to support manufacturing operations including but not limited to, SAP, LIMS, AMPS, PDOCS and/or QTS. Ensure and participates in performance of cleaning, inventory, and maintaining facility in a safe and GMP compliant manner. Here Is What You Need (Minimum Requirements) High School Diploma or GED 2 - 5 years of experience, particularly in a pharmaceutical or other cGMP (Current Good Manufacturing Practices) environment Effective verbal and written communication Proficiency in operating and troubleshooting production equipment Strong understanding of cGMP and safety regulations Ability to maintain accurate documentation and records Experience in a clean room environment Competence in using automated and enterprise systems Effective cross-functional communication skills Bonus Points If You Have (Preferred Requirements) Experience in a pharmaceutical manufacturing environment Knowledge of process improvement methodologies Ability to train and mentor less-experienced colleagues Ability to work independently and as part of a team Attention to detail and commitment to quality Adaptability and flexibility in a dynamic work environment Physical / Mental requirements Requires the moving of heavy equipment and the ability to lift ~40 pounds. Moderate repetitive standing, sitting, bending, and ladder climbing on a daily basis. The incumbent needs to take the necessary safety precautions when working with pressurized systems, steam, and corrosive chemicals. The incumbent is required to attain knowledge of the operational equipment. The incumbent will be required to assist in solving problems regarding site assessment, specific units used in Biopharmaceutical manufacturing. The incumbent must be able to follow SOPs, MBRs and be able to use a multitude of enterprise systems including SAP, Delta-V, etc. Non-Standard work schedule, travel or environment requirements 2/2/3 schedule Night shift 6pm-6am | Pay: $25.37 - $33.50 The salary for this position ranges from $25.37 to $33.50 per hour. In addition, this position offers eligibility for overtime, weekend, holiday and other pay premiums depending on the work schedule and the Company's policies. We offer comprehensive and generous benefits and programs to help our colleagues lead healthy lives and to support each of life's moments. Benefits offered include a 401(k) plan with Pfizer Matching Contributions and an additional Pfizer Retirement Savings Contribution, paid vacation, holiday and personal days, paid caregiver/parental and medical leave, and health benefits to include medical, prescription drug, dental and vision coverage. Learn more at Pfizer Candidate Site - U.S. Benefits | (uscandidates.mypfizerbenefits.com). Pfizer compensation structures and benefit packages are aligned based on the location of hire. The United States salary range provided applies only to the United States - North Carolina - Sanford

The Service Technician - SBE is responsible for repairing and reconditioning equipment in the profit center and/or customer locations. Responsible for installation of equipment for customer accounts and is responsible for diagnostics of mechanical, electrical, and plumbing problems and takes corrective action. Provides customer assistance in resolving customer questions, problems, or complaints regarding equipment. Job Responsibilities ? Calls on customers as assigned by Service Manager or General Manager to investigate operating difficulties of equipment. Diagnoses problems and figures out reasons and the nature of correction. ? Makes repairs or adjustments to equipment to return the equipment in working order. ? Cleans and maintains equipment on location including exchanging decanters and cleaning brewers. ? Documentation including verification of the closing calls, invoice completion, asset verification and any required customer documentation ? Repairs and refurbishes equipment; maintain spare parts levels. ? Ability to accurately collect work completed in company provided mobile device. ? Maintains a good working relationship and liaison with customers to maintain a positive image of the company and product. ? Perform scheduled and unscheduled service activities including emergency service calls, preventative maintenance, surveys, and installations. ? Maintains service area and vehicle in a clean and organized condition. Follows company guidelines on safety and operates vehicle in a safe manner. ? Completes weekly Driver Report and follows guidelines in the Fleet Manual. ? Follows all safety standards and policies set by manufacturers and company. At Aramark, developing new skills and doing what it takes to get the job done make a positive impact for our employees and for our customers. In order to meet our commitments, job duties may change or new ones may be assigned without formal notice. Qualifications ? High School Diploma or GED required ? Solid understanding in repairing small electrical appliances. ? Must be willing to learn how to connect equipment to water sources, add additional lines and drainage when vital. ? Must be willing to learn how to work with copper, braided and pex lines. This skill is normally developed through six months to one year of experience in the equipment service operations or through vocational training. ? The ability to read and write in English is required. ? Must also possess effective communication and customer service skills. ? Incumbent must have an acceptable driving record and a qualified driver?s license. This role may have physical demands including, but not limited to, lifting, bending, pushing, pulling and/or extended walking & standing. This role may also require uniforms and/or usage of Personal Protective Equipment (PPE). Education About Aramark Our Mission Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law. About Aramark The people of Aramark proudly serve millions of guests every day through food and facilities in 15 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential. Learn more about working here at or connect with us on Facebook , Instagram and Twitter .

Warm Greetings! My name is Srinath and I am a Sr. Technical Recruiter with Avance Consulting. We are a leading consulting company and have been in consulting business for last 10 years. We are primary vendors to several Fortune 1000, Investment Banks and Financial companies. I found your resume on one of the job boards and it looks to be a good fit for an open position we have. Please review the listed below. If you are interested, please respond with your updated resume or give me a call on ************ Ext 238 at your earliest convenience. If you are not looking for new roles, please forward this email to someone either from your professional network or friends who are looking for new opportunities since we have an excellent referral program. Hi, I hope you are doing good. I have Opportunity with one of my client, please find below Job Description for your review. If you are interested please forward me your updated resume along with your contact details to discuss further Role: Technology Lead - Service Now Duration: Full TIme / Permanent Location: Cary, NC Qualifications Basic • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. • At least 4 years of experience with Information Technology. Preferred • At least 5 years of experience in configuration and maintenance of ITSM tools. • At least 4 years experience configuring and maintaining Service Now. • Good knowledge of Java/J2EE technology and framework. • Domain knowledge of Insurance • At least 5 years of experience in application maintenance and support. • Analyze and resolve issues to ensure SLA adherence and customer satisfaction. • Perform ticket triage, prioritization, independent testing, change management processes, implementation activities and post implementation support. • Support client interfacing activities and create the relevant reports in a timely manner. • Excellent written & verbal communication • Strong Analytical skills • Experience working with offshore/onshore resources • Ability to work in team environment and client interfacing skills. • Experience and desire to work in a Global delivery environment. • Ability to work in team in diverse/ multiple stakeholder environment • Experience and desire to work in a Global delivery environment The job entails sitting as well as working at a computer for extended periods of time. Should be able to communicate by telephone, email or face to face. Travel may be required as per the job requirements. Qualifications • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. Additional Information All your information will be kept confidential according to EEO guidelines.

This is Mandeep Singh from US IT Solutions. We offers services in IT staffing, Mobile development, Web development and Cloud computing . US IT Solutions work along with its clients to deliver high-performance results, based exclusively on the one of a kind requirement. Job Description Solid knowledge and experience with browser based applications. Experience researching, analyzing and interpreting automated system problems. Very good oral and written communication skills to effectively deal with all levels of the organization. Solid experience leading a team. Experience analyzing and projecting the needs of a team to ensure success. Experience implementing and managing a help desk operation. Additional Information Thanks and regards, Mandeep Singh ************ Ext 435

Job DescriptionRole: Lead Home Service Technician TruBlue Home Service Ally is a national franchise with over 140 locations that provides trusted handyman repairs, home safety upgrades, and maintenance services to help seniors age in place and support busy families. With locations across the U.S., TruBlue is a leader in dependable, relationship-based home maintenance. This is a role for a skilled professional who leads by example, brings out the best in others, and takes pride in work that makes a real difference. What You'll Do Perform high-quality home maintenance and repair projects Lead, coach, and support a team of Tru-Pro technicians Uphold TruBlue's high standard of professionalism, reliability, and customer care Communicate clearly with customers and help manage expectations on-site Ensure safety, accuracy, and consistency across every project Common projects include: Bathroom and kitchen upgrades Drywall repair and patching Flooring installation and repair General carpentry Interior and exterior painting Basic plumbing and electrical (within scope) Who You Are 10+ years of hands-on home repair or construction experience Experience managing or mentoring other technicians is preferred Strong communication and problem-solving skills Committed to doing the job right and doing right by your team and clients Valid driver's license, reliable transportation, and full toolset Fluent in English and legally authorized to work in the U.S. What You'll Get Year-round, consistent work Reliable hours and flexible scheduling Company vehicle and TruBlue gear (varies by location) Strong office and leadership support A team culture built on compassion, trust, and professionalism A leadership role with room to grow Why TruBlue We're a company with a purpose: to make homes safer and lives easier. You'll be joining a team that supports you, respects your expertise, and values the role you play in helping customers live better at home. Powered by JazzHR ys5Q37sVR6

Job Description Lead Service Technician - Engineered Systems We're looking for a reliable, highly skilled Lead Service Technician to join our Raleigh/Clayton Service Team. This role calls for a critical thinker and hands-on leader with strong industrial electrical and mechanical skills who communicates clearly, takes ownership, and can guide a team of technicians, solve complex problems, and ensure our customers' crane and hoist systems operate safely and efficiently. Responsibilities Perform regular maintenance and repair on crane and hoist systems to ensure optimal performance. Lead, train, and support a team of Technicians in diagnosing system issues, troubleshooting electrical and mechanical problems, and completing repairs efficiently. Conduct inspections, identify potential issues, and implement solutions to prevent system failures. Ensure all work meets technical specifications, safety standards, and customer expectations. Maintain accurate maintenance and inspection logs. Communicate effectively with team members, management, and customers to coordinate work and resolve issues. Stay current with industry standards, new technologies, and ESI training programs. Follow all company policies, procedures, and safety regulations. Requirements Proven experience as a Maintenance or Industrial Technician with strong electrical and mechanical skills. Solid understanding of single and 3-phase motors, low and high voltage systems, and industrial controls. Ability to read and interpret blueprints, schematics, and technical manuals. Strong troubleshooting and problem-solving ability. Effective leadership skills - able to coach, guide, and set expectations for others. Dependable, self-motivated, and accountable for both quality and safety. Physical ability to lift/push/pull up to 50 lbs and work at heights when required. Valid driver's license with a clean driving record. Why Join ESI? Collaborative and Positive Work Environment Success of a company that has been in business over 55 years Purpose-Driven Culture Great Benefit Packages: Health, Dental, Vision, Life, Disability, 401(k) with Company Match, Paid Time Off Employee Assistance Program Employee Benevolence Program #hc204968

About The Navys Advanced Electronics / Computer Field (AECF) offers extensive training in electronics, computer systems, radar, communications, and weapons fire control systems, including the Navys advanced missile systems and Aegis radar. These technicians are essential to the ships Combat Systems department, ensuring readiness for combat operations across the fleet. Responsibilities As an Electronics Technician (ET) or Fire Controlman (FC), you may: Maintain and repair radar, communication, and navigation equipment. Operate, maintain, and repair fire control radars, mainframe computers, large screen displays, LANs, weapon control consoles, and automatic gun systems. Troubleshoot and repair electro-mechanical systems used in weapons systems. Support combat systems readiness aboard aircraft carriers, Aegis cruisers, and other surface ships. Work Environment ETs and FCs serve on fleet units worldwide and at shore-based repair facilities. Expect assignments aboard ships, at remote stations, and in technical repair shops. Work is highly technical, requiring precision and teamwork. Training & Advancement Apprentice Technical Training Great Lakes, IL (11 weeks) FC Strand Great Lakes, IL (16 weeks) ET Strand Great Lakes, IL (22 weeks) Training covers electronics theory, radar systems, communications suites, missile and gun system ballistics, troubleshooting, and fiber optics. After A School, technicians may attend advanced C Schools. College credits are often available for Navy training. Education Opportunities Navy College Program & Tuition Assistance Post-9/11 GI Bill College credits via the American Council on Education Industry-recognized certifications through Navy COOL Department of Labor apprenticeships via USMAP Qualifications & Requirements U.S. citizen, eligible for security clearance Normal hearing and color perception Strong aptitude in math, computing, and electronics Ability to work as part of a team and perform detailed technical work Pay & Benefits Competitive salary Enlistment and re-enlistment bonuses Free health insurance & housing Retirement plan Paid training Required qualifications: 18 years or older Legally authorized to work in the United States RequiredPreferredJob Industries Government & Military

Are you ready to take on a pivotal role that ensures the safety and integrity of essential infrastructure? Join our dynamic team as a Utility Technology Specialist and leverage your skills in utility locating and advanced video and drone technology to make a real impact for you and T. A. Loving Company (TALCO). Role Overview As a Utility Technology Specialist, you will process and manage 811 utility locate tickets, ensuring adherence to state regulations while keeping field teams informed. Your responsibilities also include conducting drone and camera line inspections to assess existing underground utility infrastructure systems on our projects. This role is crucial for maintaining asset integrity and operational efficiency within the work we perform as an underground Utility Contractor. 811 Locate Processing * Review and Process Requests: Meticulously handle 811 locate requests and coordinate with field crews and utility companies to prioritize and fulfill these requests. * Record Management: Maintain precise records of tickets and responses, ensuring compliance with state and company standards. * Communication: Engage effectively with customers, contractors, and internal teams to address any discrepancies or conflicts. * Deadline Monitoring: Vigilantly track ticket deadlines, escalating urgent issues as necessary. * Collaboration: Coordinate with project teams to collect detailed and accurate struck lines reporting. * Accountability: Responsible for collecting all necessary information from the field and compiling final reports to be submitted to the Business Unit Leader. Incident Reporting * Tracking and Logging: Stay updated on incidents and ensure they are accurately logged. * Report Management: Oversee detailed incident reporting, including coherent explanations, supporting drawings or photos, and timely completion within one week. * Communication: Deliver final reports to Business Unit Leadership and Project Teams. * Collaboration: Coordinate with project teams to collect detailed and accurate incident reporting. * Accountability: Responsible for collecting all necessary information from the field and compiling final reports to be submitted to the Business Unit Leader and our Safety Department. Field Technology * Drone Operations: Execute safe drone flight missions for inspections, complying with FAA regulations and safety standards. * Utilize line inspection cameras to document existing conditions within underground infrastructure. * Data Collection and Analysis: Capture and analyze high-resolution images to document in the field the location or condition of all existing utilities for project record. * Inspection Reporting: Document findings and generate comprehensive visual reports for project teams, owners, and engineers. * Equipment Maintenance: Perform basic maintenance checks and troubleshoot equipment issues. * Regulatory Compliance: Adhere to all aviation regulations and safety standards. * Collaboration: Work closely with project management and leadership to optimize drone and line inspection data utilization. Skills, Experience, Qualifications * Education: Associate's degree or 2-years of equivalent experience. * Industry Experience: Background in construction, utilities, or related fields is advantageous. * 811 Processes Familiarity: Knowledge of utility locating practices. * Technical Skills: Proficiency in Microsoft Excel, Word, and strong computer skills. * Drone Certification: FAA Part 107 Remote Pilot Certificate or equivalent in other regions (or ability to acquire certifications within 3 months of employment) * Drone Expertise: Drone flight experience, especially in utility, energy, or construction industries is advantageous. Desire and ability to learn is necessary. * Imaging Technologies: Understanding of aerial imaging technologies and data processing software. * Inspection Knowledge: Familiarity with inspection techniques and industry-specific infrastructure. * Communication and Organization: Excellent communication and organizational abilities. * Multitasking: Ability to manage time effectively and multitask in a dynamic environment. * Spatial Awareness: Strong hand-eye coordination and spatial awareness for precise piloting. * Observational Skills: Keen ability to identify potential issues during inspections. * Analytical Skills: Capable of troubleshooting equipment and interpreting data. * Teamwork: Ability to work independently and collaboratively in varied outdoor and office settings.

APPRENTICE TECHNICIAN We are seeking a motivated and reliable Apprentice Technician to join our dynamic team in the HVAC, Refrigeration, and Commercial Kitchen Equipment Repair industry. As an apprentice, you will gain hands-on experience, learn essential technical skills, and work alongside skilled professionals to become proficient in servicing, installing, and maintaining HVAC systems, refrigeration units, gas, steam, and electric. This individual must show growth within six months to one year before moving on to junior technician status. The Apprentice will be evaluated every three months and rotate between technicians to ensure diverse training. Key Responsibilities: Assist senior technicians with the installation, maintenance, and repair of HVAC, refrigeration, and commercial kitchen equipment Learn to troubleshoot and diagnose equipment issues using tools, meters, and specialized instruments Perform preventive maintenance tasks to ensure the proper functioning of equipment and systems Assist with system inspections, identify malfunctions, and provide recommendations for repairs or upgrades Maintain and organize equipment, tools, and spare parts inventory Keep accurate records of services performed, including diagnostic results, repairs, and parts used Adhere to safety guidelines and best practices when handling equipment, tools, and hazardous materials Participate in on-the-job training and attend formal training programs to develop technical knowledge and skills Communicate effectively with clients, answering questions and providing updates on repair or installation progress Assist in the preparation of estimates and work orders under supervision Support senior technicians in troubleshooting complex issues as experience is gained Requirements: High school diploma or equivalent. A strong interest in learning about HVAC, refrigeration, and commercial kitchen equipment repair Basic understanding of mechanical and electrical systems (training will be provided) Good problem-solving skills and attention to detail Ability to work in a physically demanding environment (lifting equipment, climbing ladders, working in confined spaces) Strong communication skills and the ability to work well as part of a team A valid driver's license and reliable transportation (some travel may be required) Ability to lift 50 - 70 pounds Willingness to commit to completing the apprenticeship program and pursuing a career in the trade Must be able to obtain any required fire watch and burn permits within 6 months of hire Benefits: Competitive pay with opportunities for increases based on performance and skills development Hands-on training and mentorship from experienced professionals Career growth opportunities within the company Health insurance with generous company contribution Dental, Life Insurance, Disability, and Vision 401K plan with employer match Vacation and sick days Paid holidays

: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown's history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them. From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward. We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team. Want to Learn More? Watch A Day in the Life of a Crown Field Service Technician! click here . Job Posting External Job Duties Troubleshoot, diagnose and repair Crown and all other makes of lift trucks. Perform all assigned planned maintenance on customer lift trucks. Maintain a service van and its inventory. Process paperwork after completion of each job. Minimum Qualifications Less than 2 years related experience High school diploma or equivalent Valid driver's license, good driving record, and ability to safely operate lift trucks. Preferred Qualifications Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics. Good written/verbal communication and customer care skills. Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred. Familiar with tools and equipment such as common hand tools, electrical/air tools, torch, arc welder and various types of testing equipment. Industry related training is preferred Ability to read and understand service manuals, plan, and follow-through Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. Crown also offers Service Technicians: Award-Winning Service Training Company Vehicle for Field Service Technicians Tool Insurance No Flat Rate 40 Hours Per Week plus Overtime Uniforms Specialty Tools Primarily 1st Shift Career Advancement Opportunities EOE Veterans/Disabilities

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs mid to expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. · Identifies and sources parts, supplies, and repair items as necessary. · Independently performs maintenance as per industry standards. · May be required to set up and operate multiple machining operations, including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Complies with 5S and housekeeping standards. · Drives and participates in CI activities - processes, results, and cost savings. · Updates records and reviews CMMS history. · Troubleshoots and analyzes control systems to resolve software/ hardware and configuration problems. · Utilizes predictive maintenance technologies to collect equipment performance data. · Provides assistance to lower-level technicians and leadership to small teams. Performs more advanced functions as part of training and development. · Completes on-the-job and technical self-study programs for career development. · Follows all safety-related policies, rules, regulations, technical instructions, and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: · High School Graduate or equivalent (GED). · Associate's degree with a Technical focus and 3 years of related experience in general industry; or 5 years of related experience in general industry, or successful completion of the ATS Technician Progression Program. · Understands electrical, mechanical, fluid power, and control systems. Can analyze problems and perform repairs. · Must be able to use basic hand tools and specialized tools as appropriate · May be required to travel. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. (****************************************************************************************************** ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here. (******************************************************************************************************

Warm Greetings! My name is Srinath and I am a Sr. Technical Recruiter with Avance Consulting. We are a leading consulting company and have been in consulting business for last 10 years. We are primary vendors to several Fortune 1000, Investment Banks and Financial companies. I found your resume on one of the job boards and it looks to be a good fit for an open position we have. Please review the listed below. If you are interested, please respond with your updated resume or give me a call on ************ Ext 238 at your earliest convenience. If you are not looking for new roles, please forward this email to someone either from your professional network or friends who are looking for new opportunities since we have an excellent referral program. Hi, I hope you are doing good. I have Opportunity with one of my client, please find below Job Description for your review. If you are interested please forward me your updated resume along with your contact details to discuss further Role: Technology Lead - Service Now Duration: Full TIme / Permanent Location: Cary, NC Qualifications Basic • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. • At least 4 years of experience with Information Technology. Preferred • At least 5 years of experience in configuration and maintenance of ITSM tools. • At least 4 years experience configuring and maintaining Service Now. • Good knowledge of Java/J2EE technology and framework. • Domain knowledge of Insurance • At least 5 years of experience in application maintenance and support. • Analyze and resolve issues to ensure SLA adherence and customer satisfaction. • Perform ticket triage, prioritization, independent testing, change management processes, implementation activities and post implementation support. • Support client interfacing activities and create the relevant reports in a timely manner. • Excellent written & verbal communication • Strong Analytical skills • Experience working with offshore/onshore resources • Ability to work in team environment and client interfacing skills. • Experience and desire to work in a Global delivery environment. • Ability to work in team in diverse/ multiple stakeholder environment • Experience and desire to work in a Global delivery environment The job entails sitting as well as working at a computer for extended periods of time. Should be able to communicate by telephone, email or face to face. Travel may be required as per the job requirements. Qualifications • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. Additional Information All your information will be kept confidential according to EEO guidelines.

Role: Lead Home Service Technician TruBlue Home Service Ally is a national franchise with over 140 locations that provides trusted handyman repairs, home safety upgrades, and maintenance services to help seniors age in place and support busy families. With locations across the U.S., TruBlue is a leader in dependable, relationship-based home maintenance. This is a role for a skilled professional who leads by example, brings out the best in others, and takes pride in work that makes a real difference. What You'll Do Perform high-quality home maintenance and repair projects Lead, coach, and support a team of Tru-Pro technicians Uphold TruBlue's high standard of professionalism, reliability, and customer care Communicate clearly with customers and help manage expectations on-site Ensure safety, accuracy, and consistency across every project Common projects include: Bathroom and kitchen upgrades Drywall repair and patching Flooring installation and repair General carpentry Interior and exterior painting Basic plumbing and electrical (within scope) Who You Are 10+ years of hands-on home repair or construction experience Experience managing or mentoring other technicians is preferred Strong communication and problem-solving skills Committed to doing the job right and doing right by your team and clients Valid driver's license, reliable transportation, and full toolset Fluent in English and legally authorized to work in the U.S. What You'll Get Year-round, consistent work Reliable hours and flexible scheduling Company vehicle and TruBlue gear (varies by location) Strong office and leadership support A team culture built on compassion, trust, and professionalism A leadership role with room to grow Why TruBlue We're a company with a purpose: to make homes safer and lives easier. You'll be joining a team that supports you, respects your expertise, and values the role you play in helping customers live better at home.

Lead Service Technician - Engineered Systems We're looking for a reliable, highly skilled Lead Service Technician to join our Raleigh/Clayton Service Team. This role calls for a critical thinker and hands-on leader with strong industrial electrical and mechanical skills who communicates clearly, takes ownership, and can guide a team of technicians, solve complex problems, and ensure our customers' crane and hoist systems operate safely and efficiently. Responsibilities Perform regular maintenance and repair on crane and hoist systems to ensure optimal performance. Lead, train, and support a team of Technicians in diagnosing system issues, troubleshooting electrical and mechanical problems, and completing repairs efficiently. Conduct inspections, identify potential issues, and implement solutions to prevent system failures. Ensure all work meets technical specifications, safety standards, and customer expectations. Maintain accurate maintenance and inspection logs. Communicate effectively with team members, management, and customers to coordinate work and resolve issues. Stay current with industry standards, new technologies, and ESI training programs. Follow all company policies, procedures, and safety regulations. Requirements Proven experience as a Maintenance or Industrial Technician with strong electrical and mechanical skills. Solid understanding of single and 3-phase motors, low and high voltage systems, and industrial controls. Ability to read and interpret blueprints, schematics, and technical manuals. Strong troubleshooting and problem-solving ability. Effective leadership skills - able to coach, guide, and set expectations for others. Dependable, self-motivated, and accountable for both quality and safety. Physical ability to lift/push/pull up to 50 lbs and work at heights when required. Valid driver's license with a clean driving record. Why Join ESI? Collaborative and Positive Work Environment Success of a company that has been in business over 55 years Purpose-Driven Culture Great Benefit Packages: Health, Dental, Vision, Life, Disability, 401(k) with Company Match, Paid Time Off Employee Assistance Program Employee Benevolence Program

:** Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown's history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them. From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward. We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team. Want to Learn More? Watch A Day in the Life of a Crown Field Service Technician! click here (****************************** _._ **Job Posting External** **Job Duties** + Troubleshoot, diagnose and repair Crown and all other makes of lift trucks. + Perform all assigned planned maintenance on customer lift trucks. + Maintain a service van and its inventory. + Process paperwork after completion of each job. **Minimum Qualifications** + Less than 2 years related experience + High school diploma or equivalent + Valid driver's license, good driving record, and ability to safely operate lift trucks. **Preferred Qualifications** + Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics. + Good written/verbal communication and customer care skills. + Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred. + Familiar with tools and equipment such as common hand tools, electrical/air tools, torch, arc welder and various types of testing equipment. + Industry related training is preferred + Ability to read and understand service manuals, plan, and follow-through **Work Authorization:** Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. **Compensation and Benefits:** Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. Crown also offers Service Technicians: + Award-Winning Service Training + Company Vehicle for Field Service Technicians + Tool Insurance + No Flat Rate + 40 Hours Per Week plus Overtime + Uniforms + Specialty Tools + Primarily 1st Shift + Career Advancement Opportunities EOE Veterans/Disabilities