Technician jobs in Durham, NC - 1,828 jobs

The Cable Technician is responsible for installing, maintaining, and troubleshooting structured cabling systems to support voice, data, video, and network communications. This role ensures all cabling infrastructure is installed to industry standards, project specifications, and customer requirements while maintaining safety and quality at all times. Key Responsibilities Installation & Cabling Work Install, terminate, and test copper (Cat5e, Cat6, Cat6A) and fiber optic cabling systems. Pull, label, route, and dress cables in commercial, industrial, and data center environments. Install cable trays, J-hooks, ladder racks, racks, patch panels, and related infrastructure hardware. Perform fiber splicing, connector installation, and end-to-end certification. Install network equipment including switches, wireless access points, and telecom room hardware as directed. Testing & Troubleshooting Conduct continuity, performance, and certification testing using Fluke or similar testers. Diagnose and resolve cable faults, signal loss, and connection issues. Perform repairs and upgrades to existing cabling systems with minimal downtime. Documentation & Compliance Complete detailed daily job reports, cable logs, labeling documentation, and test results. Ensure all cabling meets BICSI, NEC, and manufacturer standards. Qualifications 1-3+ years of structured cabling or low-voltage installation experience preferred. Knowledge of copper and fiber standards, cabling best practices, and industry tools. Ability to read and interpret blueprints, floor plans, and cable layouts. Experience with cable testing equipment (Fluke DSX, OTDR, light meters). Familiarity with LOTO, ladder safety, PPE, confined spaces, and general construction safety. Strong troubleshooting and problem-solving skills. Ability to lift 50+ lbs, work on ladders, and work in overhead or crawl spaces. Valid driver's license and reliable transportation. Preferred Certifications BICSI Installer 1 or Installer 2 (Copper or Fiber) OSHA 10 or OSHA 30 Manufacturer-specific cabling certifications (e.g., Commscope, Panduit)

Job Title: Facilities Technician Company: AISIN North Carolina Department: Facilities The Facilities Technician is responsible for providing electrical and mechanical support to the plant facilities. This role troubleshoots and maintains industrial manufacturing facilities equipment as well as the outdoor grounds of the facility. Position Responsibilities The incumbent is expected to perform the following functions that the company has determined are essential to this position: Handle industrial electrical issues including changing light bulbs and working with 208, 277, 480-volt, 3 phase and 120-volt, single phase equipment. Install, repair, and troubleshoot industrial piping systems along with the ability to change out pumps and motors. Troubleshoot to determine malfunctions on equipment using knowledge of microprocessors, programmable controllers, and circuit analysis. Troubleshoot AC & DC Systems up to 480 volts. Record maintenance and repairs activities in a computer-based maintenance management system, fill out utility check sheets and other required check sheets. Run Wastewater treatment system. Check operating status of air compressors. Execute plumbing repairs such as clearing clogged fixtures, drains, and adjusting leaks. Clean out clogged pumps in the sump pumps system as well as troubleshoot and adjust level controls in the system. Repair manual and automatic doors, hinges, locks, and closers on personal doors. Make repairs to dock equipment and the well system. Review equipment check sheets for abnormal readings. Lead Team Members in light fixture replacement. Ensure that restrooms are in good working order. Identify and repair building issues. Assist in making safety related kaizens and repairs. Plan and implement Kaizens. Required Skills and Abilities Essential Skills and Experience: 2 or more years of experience in industrial maintenance. Knowledge of electrical equipment - 480/230v 3ph, 110&24 vdc controls, prints and schematics. Knowledge of hydraulics and pneumatics. Knowledge of Plant Fire Sprinkler Systems. Ability to reset faults in the following systems and equipment: ATF Supply System, Crane Systems, Fluid Coolers, Air Compressors. Ability to safely operate industrial moving equipment such as a scissor lift, forklift, and other equipment. Ability to troubleshoot and correct faults on Wastewater System. Electrical skills. Mechanical - general knowledge of machines, tools, measurement instruments, automation/robotics, maintenance, and repair. Repairing - repairing machines or systems using the necessary tools. Equipment Maintenance - performing routine maintenance on equipment and determining when and what kind of maintenance is needed. Equipment Selection - determining the kind of tools and equipment needed to do a job. Math Skills - basic knowledge of mathematics. Education/Training/Certifications Associate degree in Electrical or Industrial Maintenance preferred. Travel Requirements Approximately 0 % Must be willing and available to travel to such locations and with such frequency as is necessary and desirable to meet business needs. Work Environment Requirements With reasonable accommodation: Must be able to operate a personal computer, telephone, and other office equipment. Must perform job duties onsite, when necessary, except those duties that are customarily or by their nature performed offsite (for example, offsite customer visits). Must be able to work effectively in a fast-paced environment. Must be able to work on multiple assignments at once, and complete assignments within deadline and budget (if applicable) with satisfactory quality. Must be able to operate as an effective team member. Must be committed to a high standard of safety and be willing and able to comply with all safety laws and all company safety policies. Attendance/Work Hour Requirements Must maintain an acceptable attendance record. Must be willing and available to work weekends and holidays as necessary and desirable to meet business needs.

Role: Maintenance Engineering Technician (PLC Programming) Industrial Maintenance experience in a manufacturing environment or equipment installation and debugging experience Experience with Electrical and/or mechanical systems in an industrial manufacturing environment Technical experience with PLCs in programming, including read, write and modify logic Technical experience with Servo Motion Controllers Technical experience with relay logic including wiring and troubleshooting Technical experience with Robotics including programming and troubleshooting. Experience with Hydraulic or Pneumatic troubleshooting and schematic reading Availability to work overtime, holidays, weekends, and shutdowns Ability for business travel, both domestic and international - up to 30%. Added bonus if you have: Technical associate degree or higher or equivalent experience Experience in Pre-Production set up Experience with Production Processes including Standardized Work (STW) and Job Instruction Sheets (JIS) Experience gathering and analyzing quality data from multiple sources New plant or facility startup experience Experience with high volume production in a clean room environment

City Chapel Hill, Durham, Raleigh State/Province North Carolina Country United States Department TECHNICAL_SERVICE_ENGINEERING Date Thursday, January 8, 2026 Working time Full-time Ref# 20036695 Job Level Individual Contributor Job Type Experienced Job Field TECHNICAL_SERVICE_ENGINEERING Seniority Level Associate Currency USD - United States - US Annual Base Salary Minimum 43,884 Annual Base Salary Maximum 87,768

At Highwoods, we focus on providing exceptional experiences for everyone involved - our customers, employees, stakeholders, and local communities. We believe in enhancing the customer experience within our buildings by integrating hospitality and top-notch amenities, creating a work environment that is truly unmatched. A Day in the Life As a Highwoods Maintenance Technician, you will be part of a team that strives to provide best-in-class service to our customers located in the Raleigh Market. We're seeking someone passionate about crafting dynamic experiences and fostering a sense of community for our diverse customer base within the portfolio. The Maintenance Technician plays a pivotal role in both the operational and physical health of the portfolio, ensuring it is well-maintained and effectively run while also enhancing the customer experience through community building, making the space not only functional but also a preferred destination. This position embodies a dual responsibility essential for achieving operational excellence and fostering a vibrant community atmosphere across our properties promoting open communication and trust between Highwoods and our customers. You will represent Highwoods in a professional manner to our customers, vendors, and visitors; participate in and follow the guidelines of the safety program. Work Performed: Perform a variety of general repairs, installations, and maintenance on building equipment, including changing ballasts, light bulbs and/or tubes, light switches, receptacles, door locks, and general repairs on plumbing fixtures, refrigeration equipment, alarm and fire protection systems, piping, and tubing, etc. Perform general carpentry, floor repairs, and other general repairs Inspect equipment for proper lubrication and perform other preventative maintenance duties per a schedule and as needed Troubleshoot building problem areas, make necessary repairs and adjustments Build strong customer relationships by proactively address customer concerns and inquiries, demonstrating a positive attitude and dedication to providing exceptional service. Refer complex situations to supervisor and or senior technicians Perform routine building inspections Install and repair new and existing plumbing fixtures, drain lines and accessories Supervise periodic testing and servicing; record results of cross connection devices Perform preventive maintenance, installation and repair of water pipes, controls, and associated equipment Perform installation and repair of various types of electrical fixtures including lamp and ballast replacement Installation and repair of electrical devices (switches, receptacles, breakers, low voltage transformers, etc.) Perform minor repair of heating, ventilation, and air conditioning equipment including some filter changing Monitor/check water chemical treatment programs for cooling towers and fountains Monitor customer space temperatures and adjust thermostats when needed Assist the HVAC technician with any building related mechanical or maintenance issues when required Investigate and monitor repeat customer-related calls and report them to the Building Property Manager and Customer Service Perform minor leak repairs to roof, window, and fountains Assist contractors with life safety alarm systems and water-based or dry fire protection systems shut-downs and testing Perform installation and repair of ceiling tiles, wall coverings, vinyl tile, carpet, cove base, window blinds, signage, etc. Be responsible for accurate and timely record keeping and reporting Assist in snow and ice removal using power broom, ice melt, and sand; be available for emergency cleanup/repair after inclement weather Job Requirements A fundamental knowledge of life safety systems including fire alarm, sprinkler, fire pumps, and emergency generators Be available for emergency calls at night, weekends and holidays on a rotating schedule Maintain a current North Carolina Driver's License Maintain a current Tennessee driver's license. Be able to bend, stoop, crawl & climb ladders. Desirable Qualifications Certification in one of the following: Refrigerant Transition and Recovery Maintenance experience in an industrial or commercial environment Education At least 2 years of education in at least one of the following: State, county, or local governmental agency Approved/sanctioned Technical Institution and/or College or University in one or more of the following fields: Electrical Construction Roofing Building Life Safety Systems Plumbing Carpentry Mechanical or Equivalent on-the-job training in one or more of the above-listed fields consisting of a minimum of 18 consecutive months. Why Join Our Team At Highwoods you will be part of our people-focused culture, which is a supportive environment where your growth and success are as important as that of our customers. With our customer-centric design, everything we do is driven by the goal of delivering greater value to our customers, their teams and our shareholders. We build and operate spaces that are more than workplaces; they are vibrant parts of the community where success and creativity flourish. What Sets Us Apart As part of the Highwoods team, you're not just taking on a job; you're joining a culture that values integrity, collaboration, and growth. We believe our culture is the key to success in the dynamic world of commercial real estate. Every member of our team plays a role in defining and upholding this culture-it's not just words on a page, but a way of working and living every day. We are more than just a commercial real estate company-we are in the business of creating remarkable workplaces that inspire and support growth, community and connection. Our mission is to build environments and experiences that empower our teammates and customers to achieve more together. When you join Highwoods, you'll bring your unique skills, experiences, and values to life through our shared mission. Together, we create a thriving workplace where every teammate has the support and opportunity to make a meaningful impact. Work Environment While performing the duties of this job, the employee may be exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme outdoor conditions (cold / hot weather, wind, precipitation). The noise level in the work environment and job sites can be loud. Must be comfortable working on the roofs of office buildings and climbing ladders. Physical Demands The physical demands described here are representative of those required by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear; this position is active and requires the employee to stand, walk, balance, bend, kneel, stoop, crouch, crawl, and climb. The employee must use hands to handle or feel; grasp and reach with hands and arms - must be able to work frequently with arms extended above head. The employee must occasionally lift, push, or pull up to 50-pound items. Specific visual acuity required by this job include close, distance, color, and peripheral vision, and depth perception. Ability to read, understand, and to communicate information and ideas clearly in writing and orally required. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

We are accepting applications for Travel Technicians to work at various locations across the United States. This job is 100% travel and will consist of installing low voltage wiring and equipment such as IP cameras, Wireless Access Points, Routers, Switches, etc. Qualified candidates should expect to be on the road anywhere from 2 - 8 months at a time. We are seeking a self-starter who can work well with a partner 6 days a week. The Travel Technician will be teamed up with a partner who will travel and work with them for the duration of the project. Responsibilities: * Pull and terminate low voltage cable. * Installing network equipment within commercial settings. * Follow instructions and code when pulling cable. * Run low voltage cabling in commercial buildings, including drilling concrete walls and limited conduit work. * Ensuring all cables are neatly tied and bundled according to safety regulations. * Installing of cable support structures such as j-hooks, cable racks, and inner duct. * Conduct tests to ensure all newly installed cable systems and component devices are operational. * Troubleshoot issues with the cable network. * Perform any other duties not specifically stated herein, but which your supervisor may assign. * Adhere to all required project safety requirements as set forth by the client, their customers, or OSHA. * Perform any other duties not specifically stated herein, but which your supervisor may assign. *Skills* low voltage, installation, wap, install, cctv, cable, cat5, cat6, Cabling, Cable installation, Cable puller, wireless access point, access control, punchdown, telecommunication, troubleshooting *Top Skills Details* low voltage,installation,wap,install,cctv,cable,cat5,cat6 *Additional Skills & Qualifications* Requirements: * Experience as a Data Cable Technician. * Available for extensive travel nationwide. * Ability to prioritize tasks. * Able to lift and carry 50 pounds or more multiple times per shift. * Ability to work in cramped spaces. * Hours of project 7 pm - 7 am 5 days a week. * Ability and willingness to travel to Lowell, AR for new hire orientation. * 100% travel of the USA * Ability to operate a scissor lift; and ability to work at heights. * Able to fill out the work order and take care of the tools provided by the office to do the job. * Abide by PPE requirements. Company provides hard hat, vest, and safety glasses. Must provide your own steel-toed boots. * Tools required by the technicians: hand tools, screwdrivers (both standard and Phillips), snips, punch down (impact), toner and probe, pliers, adjustable wrenches, joint pliers, and lineman pliers. * Valid driver's license with a clean driving record; no DUI or DWI in the last three years. Benefits: * Per-Diem paid $125 a day for food and lodging. * Company vehicle provided (traveling with a partner) *Experience Level* Intermediate Level *Job Type & Location*This is a Contract position based out of Raleigh, NC. *Pay and Benefits*The pay range for this position is $19.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) *Workplace Type*This is a fully onsite position in Raleigh,NC. *Application Deadline*This position is anticipated to close on Jan 21, 2026. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Role Description This is a full-time hybrid role for a Breaker Shop Technician based in Burlington, NC, with some flexibility for remote work. Responsibilities include conducting routine maintenance and repair of electrical breakers and heavy equipment, diagnosing and troubleshooting equipment issues, and operating tools and machinery safely. The role also involves collaborating with team members and supporting warehouse operations when needed. Qualifications Knowledge and experience in Maintenance & Repair of electrical breakers, heavy equipment, and mechanical systems Proficiency in Troubleshooting and problem-solving technical equipment issues Skill in Forklift Operation and handling other heavy machinery safely Strong Communication skills to collaborate with team members and report on work progress Ability to work in a dynamic environment with a focus on safety, attention to detail, and efficiency Previous experience working with breakers and/or industrial equipment is preferred but not required High school diploma or equivalent; technical certifications

Rangam is seeking candidates for a Direct Hire role as a Bioprocess Technician III and IV with our client Pfizer, one of the world's largest pharmaceutical companies. Seeking candidates in Sanford, NC *This position is being offered as part of a disability/neurodiversity hiring program which is designed to provide a more inclusive and supportive hiring process and work environment for job seekers with physical and cognitive disabilities, which includes, but is not limited to autism, ADD/ADHD, PTSD, OCD, Anxiety Disorder, Dyslexia, Bipolar, and Tourette's Syndrome* What You Will Achieve In this role, you will: Executes manufacturing operations on the production floor for buffer/media make-up tanks, glass washers, autoclaves, bioreactors / fermenters, filtration equipment, inoculum preparation, chromatography skids and/or UF/DF skids with varying levels of automation. Follow SOPs and batch records for unit operations Supports operation of manufacturing equipment and issue resolution associated with process equipment commissioning, qualification and validation. Drives troubleshooting, technical support/analysis and resolution of equipment, automation, and process issues on the manufacturing floor. Drives for Right first time and continuous improvement execution, the timely review of daily documentation and completes data entry; Identify and/or Communicate process and compliance concerns in real time. Supports audits and observation improvements. Collaborates with the Subject Matter Expert for manufacturing operations in support of QTS investigations and CAPA implementations. Responsible for remaining current on assigned training. Implements Lean Manufacturing, Sustainability, Operational Excellence initiatives; facilitate the drive towards continuous improvement in all manufacturing areas. Collaborates in the escalation process through various levels of management when operations, personnel safety, equipment functionality, product supply and/or quality compliance are at risk. Ensures work requests are generated when issues arise with facility / manufacturing equipment. Proficient in enterprise systems to support manufacturing operations including but not limited to, SAP, LIMS, AMPS, PDOCS and/or QTS. Ensure and participates in performance of cleaning, inventory, and maintaining facility in a safe and GMP compliant manner. Here Is What You Need (Minimum Requirements) High School Diploma or GED 2 - 5 years of experience, particularly in a pharmaceutical or other cGMP (Current Good Manufacturing Practices) environment Effective verbal and written communication Proficiency in operating and troubleshooting production equipment Strong understanding of cGMP and safety regulations Ability to maintain accurate documentation and records Experience in a clean room environment Competence in using automated and enterprise systems Effective cross-functional communication skills Bonus Points If You Have (Preferred Requirements) Experience in a pharmaceutical manufacturing environment Knowledge of process improvement methodologies Ability to train and mentor less-experienced colleagues Ability to work independently and as part of a team Attention to detail and commitment to quality Adaptability and flexibility in a dynamic work environment Physical / Mental requirements Requires the moving of heavy equipment and the ability to lift ~40 pounds. Moderate repetitive standing, sitting, bending, and ladder climbing on a daily basis. The incumbent needs to take the necessary safety precautions when working with pressurized systems, steam, and corrosive chemicals. The incumbent is required to attain knowledge of the operational equipment. The incumbent will be required to assist in solving problems regarding site assessment, specific units used in Biopharmaceutical manufacturing. The incumbent must be able to follow SOPs, MBRs and be able to use a multitude of enterprise systems including SAP, Delta-V, etc. Non-Standard work schedule, travel or environment requirements 2/2/3 schedule Night shift 6pm-6am | Pay: $25.37 - $33.50 The salary for this position ranges from $25.37 to $33.50 per hour. In addition, this position offers eligibility for overtime, weekend, holiday and other pay premiums depending on the work schedule and the Company's policies. We offer comprehensive and generous benefits and programs to help our colleagues lead healthy lives and to support each of life's moments. Benefits offered include a 401(k) plan with Pfizer Matching Contributions and an additional Pfizer Retirement Savings Contribution, paid vacation, holiday and personal days, paid caregiver/parental and medical leave, and health benefits to include medical, prescription drug, dental and vision coverage. Learn more at Pfizer Candidate Site - U.S. Benefits | (uscandidates.mypfizerbenefits.com). Pfizer compensation structures and benefit packages are aligned based on the location of hire. The United States salary range provided applies only to the United States - North Carolina - Sanford

Dominium is helping tackle the affordable housing crisis - and we're looking for motivated candidates to join our team and advance our mission. With offices in Atlanta, Dallas, Phoenix and Minneapolis, Dominium is one of the nation's most respected and innovative affordable housing development and management companies. We create quality, affordable homes and engage with our residents to foster a strong sense of community and connection. Join us in making a difference in people's lives every day at a company where you can challenge yourself to develop both personally and professionally. We are currently seeking a Maintenance Technician to join our team at Magnolia Pointe, a 266 unit apartment community in Durham, NC. Position Summary: As a Maintenance Technician, you will be responsible for the general appearance and maintenance of the property to help create a great living experience for our residents. Responsibilities: Monitor property for any repairs or replacements that may arise Complete work requests for common areas and apartment units Perform preventative maintenance on property Assess and repair appliances as needed Assist in preparing vacant units ready for new residents Occasional on-call duties (trip stipend provided if called back to site after regular work hours) Create and maintain a safe work environment Qualifications: 1 - 2 years previous experience in maintenance preferred Basic knowledge of electrical systems, plumbing systems, and painting HVAC and EPA experience preferred CPO certification preferred Valid drivers' license and insurance may be required About Us: Dominium is a purpose-driven leader in affordable housing. We operate in approximately 20 states, supported by a team of over 1,300 dedicated employees. For more than 50 years, we have delivered excellence in the development and management of affordable housing communities across the United States. Dominium's values - EDGE: Entrepreneurial Innovation, Developing People, Growth Mindset and Execution - guide us in fulfilling our Purpose: to provide quality, affordable housing that builds Enduring Value for our residents, employees, communities and financial partners. We believe housing provides dignity, and our work has a positive, lasting impact on the lives of individuals and families - often for generations. Our properties last for decades, leaving a lasting impact in the communities where they are located. We offer a competitive salary, an incentive bonus program, training and development programs, career growth and community volunteer and outreach programs. We also provide a comprehensive benefits package for eligible employees, including Basic Life and AD&D; Employee, Spouse and Child Supplemental Life and AD&D; and Short and Long-Term Disability insurance. We also offer Medical, Dental and Vision coverage, with optional Health Savings Accounts, as well as Medical and Dependent Care Flexible Spending Accounts. We offer Voluntary Benefits (Accident, Critical Illness, Whole Life) and an Employee Assistance Program. Additionally, you have access to a 401(K) plan, Health and Financial Wellness Programs, Paid Time Off including Paid Holidays and Floating Holidays, Paid Parental Leave, Education Reimbursement, Employee Recognition and the Dominium Employee Emergency Fund. Dominium is committed to providing equal employment opportunities to qualified applicants and employees. Dominium prohibits employment discrimination on race, color, creed, religion, national origin, citizenship, sex (including sexual orientation and gender identity), pregnancy, marital status, familial status, status with regard to public assistance, disability, membership or activity in local commission, veteran status, military status, age, genetic information, union membership, use of lawful consumable products, or any other category protected by applicable state or federal law. #LI-KB1 Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

The Service Technician - SBE is responsible for repairing and reconditioning equipment in the profit center and/or customer locations. Responsible for installation of equipment for customer accounts and is responsible for diagnostics of mechanical, electrical, and plumbing problems and takes corrective action. Provides customer assistance in resolving customer questions, problems, or complaints regarding equipment. Job Responsibilities ? Calls on customers as assigned by Service Manager or General Manager to investigate operating difficulties of equipment. Diagnoses problems and figures out reasons and the nature of correction. ? Makes repairs or adjustments to equipment to return the equipment in working order. ? Cleans and maintains equipment on location including exchanging decanters and cleaning brewers. ? Documentation including verification of the closing calls, invoice completion, asset verification and any required customer documentation ? Repairs and refurbishes equipment; maintain spare parts levels. ? Ability to accurately collect work completed in company provided mobile device. ? Maintains a good working relationship and liaison with customers to maintain a positive image of the company and product. ? Perform scheduled and unscheduled service activities including emergency service calls, preventative maintenance, surveys, and installations. ? Maintains service area and vehicle in a clean and organized condition. Follows company guidelines on safety and operates vehicle in a safe manner. ? Completes weekly Driver Report and follows guidelines in the Fleet Manual. ? Follows all safety standards and policies set by manufacturers and company. At Aramark, developing new skills and doing what it takes to get the job done make a positive impact for our employees and for our customers. In order to meet our commitments, job duties may change or new ones may be assigned without formal notice. Qualifications ? High School Diploma or GED required ? Solid understanding in repairing small electrical appliances. ? Must be willing to learn how to connect equipment to water sources, add additional lines and drainage when vital. ? Must be willing to learn how to work with copper, braided and pex lines. This skill is normally developed through six months to one year of experience in the equipment service operations or through vocational training. ? The ability to read and write in English is required. ? Must also possess effective communication and customer service skills. ? Incumbent must have an acceptable driving record and a qualified driver?s license. This role may have physical demands including, but not limited to, lifting, bending, pushing, pulling and/or extended walking & standing. This role may also require uniforms and/or usage of Personal Protective Equipment (PPE). Education About Aramark Our Mission Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law. About Aramark The people of Aramark proudly serve millions of guests every day through food and facilities in 15 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential. Learn more about working here at or connect with us on Facebook , Instagram and Twitter .

Why Choose a Career with the AAA The Auto Club Group (ACG) / AAA Car Care: At AAA Car Care, we are your preferred automotive experts providing customers with friendly, knowledgeable advice and technical expertise. With 34 stores and counting, we are the largest chains of AAA club-owned repair facilities in the USA. In our clean and conveniently located facilities, we offer a full range of automotive repair and maintenance services to AAA members and non-members. Every AAA Car Care facility is staffed with ASE-certified technicians who ensure that every car is treated with the utmost care. Now you know about us, but who are you? You are likely someone who is mechanically inclined, enjoys working on automobiles and providing excellent customer service. Learning and growing professionally is something that is important to you and at AAA Car Care, you will find that and more. We are members serving members. We are committed. We aspire to create a workplace that helps others, members and team members alike. This is What Makes Us . . . Us. Come join our team! A day-in-the-life of a Technician C: Technician Cs complete routine scheduled maintenance service on automobiles and trucks, as directed by a Manager or Service Advisor. They spend their day performing basic automotive repair, adjustments and maintenance procedures, including, but not limited to; oil changes, tire replacement & repairs and general vehicle maintenance. In this role, a Technician C will also have the opportunity to: Perform automotive repairs, adjustments and maintenance procedures as outlined on repair orders Complete fluid exchanges, alignments, brake services, advanced repair and maintenance services, etc. Drive vehicles into service bay, prepare them for and completes digital vehicle inspection Test drives vehicles and prepare vehicle for delivery to customer after necessary repairs and maintenance are complete Keep the shop clean and organized to ensure a positive member / customer experience How we reward our employees: You know compensation goes way beyond take-home pay. AAA offers best in class benefits including, but not limited to following: Excellent medical, dental, vision and prescription Free AAA membership Free uniforms and shoes Up to 3 weeks of vacation in your first year 11 paid holidays We offer profit sharing, and 401k with matching contributions. Automatic 4% 401K employer contribution Additional 401K match of 50% up to 6% contribution (6% personal contribution @ 50% match = 3% company contribution + 4% automatic company contribution = 7% of your annual income) Pay rates starting at $42,000 annual (rate fluctuates based on productivity + annual bonus eligibility) In addition to base hourly pay, Technician Cs are eligible for: Annual Incentive Opportunity Certification Bonus Opportunity Flat Rate (Production) Pay We are committed to work-life balance Closed Sundays Shorter workdays than competitors (we close at 6pm) Monday - Friday, hours are 7:30am-6pm Saturday, hours are 8am to 4pm Closed major holidays We are looking for candidates who: Required Qualifications: High School diploma, GED or Technical school graduate, certification Must possess valid driver's license Minimum of 6 months relevant experience in automotive repair or completion of formal automotive training program. Knowledge of automotive and/or truck systems, tools and technical resources and training to independently perform a variety of usually basic repairs and maintenance of automobile and truck vehicles. Understand and consistently demonstrate the proper use of equipment and tools used in such repair and maintenance and the need to maintain a clean, safe and organized work area. Ability to consistently provide exceptional customer service and improve customer service score Preferred Qualifications: ASE Certifications (or their equivalent). A4-Suspension & Steering, A5-Brakes G1-Auto Maintenance & Light Repair preferred State inspection certificate where applicable AC 609 Certification Work Environment May experience loud noises and odors intermittently in the shop environment. This position involves standing, walking and normal physical mobility, including reaching, grabbing, lifting and carrying automotive parts and equipment (averaging up to approximately 80 pounds in weight) Must have own tools appropriate for their skill level for use in the center. Must be able to work in the heat, as some locations do not have air conditioning. Fans are present in all facilities. Must be able to maintain working on your feet in a concrete facility for the entire work shift. Interested in learning more? Apply Today! Who We Are Become a part of something bigger. The Auto Club Group (ACG) provides membership, travel, insurance, and financial service offerings to approximately 14+ million members and customers across 14 states and 2 U.S. territories through AAA, Meemic, and Fremont brands. ACG belongs to the national AAA federation and is the second largest AAA club in North America. By continuing to invest in more advanced technology, pursuing innovative products, and hiring a highly skilled workforce, AAA continues to build upon its heritage of providing quality service and helping our members enjoy life's journey through insurance, travel, financial services, and roadside assistance. And when you join our team, one of the first things you'll notice is that same, whole-hearted, enthusiastic advocacy for each other. We have positions available for every walk of life! AAA prides itself on creating an inclusive and welcoming environment of diverse backgrounds, experiences, and viewpoints, realizing our differences make us stronger. To learn more about AAA The Auto Club Group visit *********** Important Note: ACG's Compensation philosophy is to provide a market-competitive structure of fair, equitable and performance-based pay to attract and retain excellent talent that will enable ACG to meet its short and long-term goals. ACG utilizes a geographic pay differential as part of the base salary compensation program. Pay ranges outlined in this posting are based on the various ranges within the geographic areas which ACG operates. Salary at time of offer is determined based on these and other factors as associated with the job and job level. The above statements describe the principal and essential functions, but not all functions that may be inherent in the job. This job requires the ability to perform duties contained in the job description for this position, including, but not limited to, the above requirements. Reasonable accommodations will be made for otherwise qualified applicants, as needed, to enable them to fulfill these requirements. The Auto Club Group, and all its affiliated companies, is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, disability or protected veteran status. Regular and reliable attendance is essential for the function of this job. AAA The Auto Club Group is committed to providing a safe workplace. Every applicant offered employment within The Auto Club Group will be required to consent to a background and drug screen based on the requirements of the position.

Warm Greetings! My name is Srinath and I am a Sr. Technical Recruiter with Avance Consulting. We are a leading consulting company and have been in consulting business for last 10 years. We are primary vendors to several Fortune 1000, Investment Banks and Financial companies. I found your resume on one of the job boards and it looks to be a good fit for an open position we have. Please review the listed below. If you are interested, please respond with your updated resume or give me a call on ************ Ext 238 at your earliest convenience. If you are not looking for new roles, please forward this email to someone either from your professional network or friends who are looking for new opportunities since we have an excellent referral program. Hi, I hope you are doing good. I have Opportunity with one of my client, please find below Job Description for your review. If you are interested please forward me your updated resume along with your contact details to discuss further Role: Technology Lead - Service Now Duration: Full TIme / Permanent Location: Cary, NC Qualifications Basic • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. • At least 4 years of experience with Information Technology. Preferred • At least 5 years of experience in configuration and maintenance of ITSM tools. • At least 4 years experience configuring and maintaining Service Now. • Good knowledge of Java/J2EE technology and framework. • Domain knowledge of Insurance • At least 5 years of experience in application maintenance and support. • Analyze and resolve issues to ensure SLA adherence and customer satisfaction. • Perform ticket triage, prioritization, independent testing, change management processes, implementation activities and post implementation support. • Support client interfacing activities and create the relevant reports in a timely manner. • Excellent written & verbal communication • Strong Analytical skills • Experience working with offshore/onshore resources • Ability to work in team environment and client interfacing skills. • Experience and desire to work in a Global delivery environment. • Ability to work in team in diverse/ multiple stakeholder environment • Experience and desire to work in a Global delivery environment The job entails sitting as well as working at a computer for extended periods of time. Should be able to communicate by telephone, email or face to face. Travel may be required as per the job requirements. Qualifications • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionRole: Lead Home Service Technician TruBlue Home Service Ally is a national franchise with over 140 locations that provides trusted handyman repairs, home safety upgrades, and maintenance services to help seniors age in place and support busy families. With locations across the U.S., TruBlue is a leader in dependable, relationship-based home maintenance. This is a role for a skilled professional who leads by example, brings out the best in others, and takes pride in work that makes a real difference. What You'll Do Perform high-quality home maintenance and repair projects Lead, coach, and support a team of Tru-Pro technicians Uphold TruBlue's high standard of professionalism, reliability, and customer care Communicate clearly with customers and help manage expectations on-site Ensure safety, accuracy, and consistency across every project Common projects include: Bathroom and kitchen upgrades Drywall repair and patching Flooring installation and repair General carpentry Interior and exterior painting Basic plumbing and electrical (within scope) Who You Are 10+ years of hands-on home repair or construction experience Experience managing or mentoring other technicians is preferred Strong communication and problem-solving skills Committed to doing the job right and doing right by your team and clients Valid driver's license, reliable transportation, and full toolset Fluent in English and legally authorized to work in the U.S. What You'll Get Year-round, consistent work Reliable hours and flexible scheduling Company vehicle and TruBlue gear (varies by location) Strong office and leadership support A team culture built on compassion, trust, and professionalism A leadership role with room to grow Why TruBlue We're a company with a purpose: to make homes safer and lives easier. You'll be joining a team that supports you, respects your expertise, and values the role you play in helping customers live better at home. Powered by JazzHR ys5Q37sVR6

Job Description Lead Service Technician - Engineered Systems We're looking for a reliable, highly skilled Lead Service Technician to join our Raleigh/Clayton Service Team. This role calls for a critical thinker and hands-on leader with strong industrial electrical and mechanical skills who communicates clearly, takes ownership, and can guide a team of technicians, solve complex problems, and ensure our customers' crane and hoist systems operate safely and efficiently. Responsibilities Perform regular maintenance and repair on crane and hoist systems to ensure optimal performance. Lead, train, and support a team of Technicians in diagnosing system issues, troubleshooting electrical and mechanical problems, and completing repairs efficiently. Conduct inspections, identify potential issues, and implement solutions to prevent system failures. Ensure all work meets technical specifications, safety standards, and customer expectations. Maintain accurate maintenance and inspection logs. Communicate effectively with team members, management, and customers to coordinate work and resolve issues. Stay current with industry standards, new technologies, and ESI training programs. Follow all company policies, procedures, and safety regulations. Requirements Proven experience as a Maintenance or Industrial Technician with strong electrical and mechanical skills. Solid understanding of single and 3-phase motors, low and high voltage systems, and industrial controls. Ability to read and interpret blueprints, schematics, and technical manuals. Strong troubleshooting and problem-solving ability. Effective leadership skills - able to coach, guide, and set expectations for others. Dependable, self-motivated, and accountable for both quality and safety. Physical ability to lift/push/pull up to 50 lbs and work at heights when required. Valid driver's license with a clean driving record. Why Join ESI? Collaborative and Positive Work Environment Success of a company that has been in business over 55 years Purpose-Driven Culture Great Benefit Packages: Health, Dental, Vision, Life, Disability, 401(k) with Company Match, Paid Time Off Employee Assistance Program Employee Benevolence Program #hc204968

: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown's history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them. From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward. We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team. Want to Learn More? Watch A Day in the Life of a Crown Field Service Technician! click here . Job Posting External Job Duties Troubleshoot, diagnose and repair Crown and all other makes of lift trucks. Perform all assigned planned maintenance on customer lift trucks. Maintain a service van and its inventory. Process paperwork after completion of each job. Minimum Qualifications Less than 2 years related experience High school diploma or equivalent Valid driver's license, good driving record, and ability to safely operate lift trucks. Preferred Qualifications Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics. Good written/verbal communication and customer care skills. Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred. Familiar with tools and equipment such as common hand tools, electrical/air tools, torch, arc welder and various types of testing equipment. Industry related training is preferred Ability to read and understand service manuals, plan, and follow-through Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. Crown also offers Service Technicians: Award-Winning Service Training Company Vehicle for Field Service Technicians Tool Insurance No Flat Rate 40 Hours Per Week plus Overtime Uniforms Specialty Tools Primarily 1st Shift Career Advancement Opportunities EOE Veterans/Disabilities

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs mid to expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. · Identifies and sources parts, supplies, and repair items as necessary. · Independently performs maintenance as per industry standards. · May be required to set up and operate multiple machining operations, including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Complies with 5S and housekeeping standards. · Drives and participates in CI activities - processes, results, and cost savings. · Updates records and reviews CMMS history. · Troubleshoots and analyzes control systems to resolve software/ hardware and configuration problems. · Utilizes predictive maintenance technologies to collect equipment performance data. · Provides assistance to lower-level technicians and leadership to small teams. Performs more advanced functions as part of training and development. · Completes on-the-job and technical self-study programs for career development. · Follows all safety-related policies, rules, regulations, technical instructions, and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: · High School Graduate or equivalent (GED). · Associate's degree with a Technical focus and 3 years of related experience in general industry; or 5 years of related experience in general industry, or successful completion of the ATS Technician Progression Program. · Understands electrical, mechanical, fluid power, and control systems. Can analyze problems and perform repairs. · Must be able to use basic hand tools and specialized tools as appropriate · May be required to travel. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. (****************************************************************************************************** ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here. (******************************************************************************************************

The Maintenance Technician independently performs a wide variety of general maintenance repairs relating to an assigned portfolio of commercial properties. Represents the company in a professional manner to customers, vendors and the general public. Is a team player and works with co-workers for the good of Highwoods. Participates in and follows the guidelines of Highwoods Safety Program. Work Performed Responsible for the overall maintenance of building, utility systems and building equipment Perform routine building inspections according to company policy Install and repair new and existing plumbing fixtures drain lines and accessories Perform periodic testing, servicing, and recording results of cross connection devices Perform preventive maintenance, installation and repair of water pipes, controls, and associated equipment Perform minor repair of heating, ventilation, and air condition equipment including some filter changing Monitor water chemical treatment programs for cooling towers and fountains Monitor customer space temperatures and adjust thermostats when needed Assist the HVAC technician with any building related mechanical or maintenance issues when required Investigate and monitor repeat customer-related calls and report them to the Maintenance Manager and Property Manager Perform minor leak repairs to roof, window, and fountains Assist contractors with life safety alarm systems and water-based or dry fire protection systems shut downs and testing. Install and repair ceiling tiles, wall coverings, vinyl tile, carpet, cove base, window blinds, signage, etc. Be responsible for accurate and timely record keeping and reporting Assist in snow and ice removal using hand tools, ice melt, and sand Job Requirements Documented training/certification/license in one or more of the following fields: Plumbing Mechanical Roofing Be available for emergency calls at night, weekends and holidays on a rotating schedule, outlined in the on-call schedule. Fundamental knowledge of state and local building codes Maintain a current Driver's License Education A minimum of 2 years of education from one of the following: State, county or local governmental agency EPA Certification Approved/sanctioned Technical Institution and/or College or University In one or more of the following fields: Construction Roofing Building Life Safety Systems Plumbing Carpentry Mechanical OR Equivalent on-the-job training in one or more of the above listed fields consisting of a minimum of six consecutive months 3 or more years of general industrial or commercial maintenance experience. Work Environment While performing the duties of this job, the employee may be exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme outdoor conditions (cold/hot weather, wind, precipitation). The noise level in the work environment and job sites can be loud. Must be comfortable working on the roofs of office buildings and climbing ladders. Physical Demands The physical demand described here are representative of those required by and employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear; this position is active and requires the employee to stand, walk, balance, bend, kneel, stoop, crouch, crawl, and climb. The employee must use hands and handle or feel; grasp and reach with hands and arms - must be able to work frequently with arms extended above head. The employee must occasionally lift, push or pull up to 50-pound items. Specific visual acuity required by the job include close, distance, color, peripheral vision and depth perception. The ability to read, understand, and to communicate information and ideas clearly in writing and orally is required.

Level 1 technician . The hiring manager wants someone who is trainable with experience working a physically demanding job in the past. Work ethic and attitude are the main thing they are looking for as they will be working at a data center. Dependability and attendance are crucial as well. We are seeking a self-starter who can work well with a partner 6 days a week. The Travel Technician will be teamed up with a partner who will travel and work with them for the duration of the project. Responsibilities: * Pull and terminate low voltage cable. * Installing network equipment within commercial settings. * Follow instructions and code when pulling cable. * Run low voltage cabling in commercial buildings, including drilling concrete walls and limited conduit work. * Ensuring all cables are neatly tied and bundled according to safety regulations. * Installing of cable support structures such as j-hooks, cable racks, and inner duct. * Conduct tests to ensure all newly installed cable systems and component devices are operational. * Troubleshoot issues with the cable network. * Perform any other duties not specifically stated herein, but which your supervisor may assign. * Adhere to all required project safety requirements as set forth by the client, their customers, or OSHA. * Perform any other duties not specifically stated herein, but which your supervisor may assign. *Skills* low voltage, installation, wap, install, cctv, cable, cat5, cat6, Cabling, Cable installation, Cable puller, wireless access point, access control, punchdown, telecommunication, troubleshooting *Top Skills Details* low voltage,installation,wap,install,cctv,cable,cat5,cat6 *Additional Skills & Qualifications* Requirements: * Experience as a Data Cable Technician. * Available for extensive travel nationwide. * Ability to prioritize tasks. * Able to lift and carry 50 pounds or more multiple times per shift. * Ability to work in cramped spaces. * Hours of project 7 pm - 7 am 5 days a week. * Ability and willingness to travel to Lowell, AR for new hire orientation. * 100% travel of the USA * Ability to operate a scissor lift; and ability to work at heights. * Able to fill out the work order and take care of the tools provided by the office to do the job. * Abide by PPE requirements. Company provides hard hat, vest, and safety glasses. Must provide your own steel-toed boots. * Tools required by the technicians: hand tools, screwdrivers (both standard and Phillips), snips, punch down (impact), toner and probe, pliers, adjustable wrenches, joint pliers, and lineman pliers. * Valid driver's license with a clean driving record; no DUI or DWI in the last three years. *Experience Level* Intermediate Level 1 technician (helper) with not much telecom experience. The hiring manager wants someone who is trainable with experience working a physically demanding job in the past. Work ethic and attitude are the main things they are looking for as they will be working at a data center. Dependability and attendance are crucial as well. *Job Type & Location*This is a Contract position based out of Raleigh, NC. *Pay and Benefits*The pay range for this position is $19.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) *Workplace Type*This is a fully onsite position in Raleigh,NC. *Application Deadline*This position is anticipated to close on Jan 21, 2026. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

:** Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown's history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them. From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward. We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team. Want to Learn More? Watch A Day in the Life of a Crown Field Service Technician! click here (****************************** _._ **Job Posting External** **Job Duties** + Troubleshoot, diagnose and repair Crown and all other makes of lift trucks. + Perform all assigned planned maintenance on customer lift trucks. + Maintain a service van and its inventory. + Process paperwork after completion of each job. **Minimum Qualifications** + Less than 2 years related experience + High school diploma or equivalent + Valid driver's license, good driving record, and ability to safely operate lift trucks. **Preferred Qualifications** + Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics. + Good written/verbal communication and customer care skills. + Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred. + Familiar with tools and equipment such as common hand tools, electrical/air tools, torch, arc welder and various types of testing equipment. + Industry related training is preferred + Ability to read and understand service manuals, plan, and follow-through **Work Authorization:** Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. **Compensation and Benefits:** Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. Crown also offers Service Technicians: + Award-Winning Service Training + Company Vehicle for Field Service Technicians + Tool Insurance + No Flat Rate + 40 Hours Per Week plus Overtime + Uniforms + Specialty Tools + Primarily 1st Shift + Career Advancement Opportunities EOE Veterans/Disabilities