Technician jobs in Gastonia, NC - 2,476 jobs

Shift: N2: Wed., Thur., Fri., Alternating Sat. 6:30PM - 6:00AM Sign On Bonus: $5,000 Spartanburg SC is the largest manufacturing and distribution site in the Keurig Dr. Pepper network. It runs on first-in-class factory systems with highly automated processing, packaging, and material movement. The site uses a High Performance Teams structure to execute on the foundational principles of Total Productive Maintenance and Lean Manufacturing. Each associate at the Spartanburg site is accountable to a functional business unit and to the overall site operation. As an Electro Mechanical Technician, you will work with internal and external teams to execute varied maintenance, capital, and continuous improvement plans with minimal supervision. A strong understanding of automated electrical and mechanical systems is key to your success in this role. In this team-based environment, you will be looked upon to train, mentor, and guide the work of less experienced technicians within your group. RESPONSIBILITIES: Execute predefined maintenance and continuous improvement plans. Identify gaps, breakdowns, and opportunities in equipment and integrated factory systems. Drive maintenance and process improvements to implementation or resolution. Identify, plan, and execute work to troubleshoot, repair, modify, or install complex manufacturing equipment and systems. Work with Stakeholders to understand requirements and recommend or develop plans and designs to fulfill. Assist other technicians and technical teams as priorities dictate, time allows, or as directed. Complete or assist with special projects and/or other duties as directed. Comply with regulatory, Keurig Dr Pepper departmental policies, procedures, and standards with special focus on Safety and Quality. Maintain safe, clean, & well-organized work areas. Total Rewards: Pay starting at $42.08 per hour. The employee will move to a higher rate of $44.29 per hour in the quarter after their 6-month anniversary. Shift Premium: Wed., $1/hr, Thur., $1/h, Fri. $2/hr, Sat. $2/hr Where Applicable: Benefits eligible day one!! Benefits, subject to eligibility, and collective bargaining agreements (where applicable): Medical, Dental, Vision, Disability, Paid Time Off (including vacation and sick time), 401k with company match, Tuition Reimbursement, and Mileage Reimbursement Requirements: Associates Degree in Electrical Engineering and or equivalent experience is preferred. 5 years' experience maintaining, troubleshooting, and repairing automated systems and equipment. Proficient mechanical, electrical and PLC skills (Rockwell, Siemens, and Beckhoff preferred) Experience with Laser Guided Vehicles and Autonomous Mobile Robots is preferred. Experience with robotic system (Fanuc preferred). Experience with vision and quality gate sytems. Ability to understand complex instructions and diagrams. Ability to work efficiently within standards, revision control, and change management rules. Ability to use and understand precision testing and diagnostic equipment. Knowledge of inventory control, warehouse execution, and manufacturing execution systems is preferred. Proficient in Office applications. Self-motivated, accountable, and effective with minimal supervision. Ability to cooperate, collaborate, be punctual, and follow instructions. Ability to spend significant time standing on the manufacturing floor. Ability to frequently kneel, squat, bend, stoop, twist, and reach overhead. Ability to lift 50 pounds. Company Overview: Keurig Dr Pepper (NASDAQ: KDP) is a leading beverage company in North America, with a portfolio of more than 125 owned, licensed and partner brands and powerful distribution capabilities to provide a beverage for every need, anytime, anywhere. We operate with a differentiated business model and world-class brand portfolio, powered by a talented and engaged team that is anchored in our values. We work with big, exciting beverage brands and the #1 single-serve coffee brewing system in North America at KDP, and we have fun doing it! Together, we have built a leading beverage company in North America offering hot and cold beverages together at scale. Whatever your area of expertise, at KDP you can be a part of a team that's proud of its brands, partnerships, innovation, and growth. Will you join us? We strive to be an employer of choice, providing a culture and opportunities that empower our team of ~29,000 employees to grow and develop. We offer robust benefits to support your health and wellness as well as your personal and financial well-being. We also provide employee programs designed to enhance your professional growth and development, while ensuring you feel valued, inspired and appreciated at work. Keurig Dr Pepper is an equal opportunity employer and recruits qualified applicants and advances in employment its employees without regard to race, color, religion, gender, sexual orientation, gender identity, gender expression, age, disability or association with a person with a disability, medical condition, genetic information, ethnic or national origin, marital status, veteran status, or any other status protected by law. A.I. Disclosure: KDP uses artificial intelligence to assist with initial resume screening and candidate matching. This technology helps us efficiently identify candidates whose qualifications align with our open roles. If you prefer not to have your application processed using artificial intelligence, you may opt out by emailing your resume and qualifications directly to **************** in lieu of clicking Apply. Please include the job title and location or Job ID # in the email subject line.

Job Status/Type:Full time Level I Shift/ Schedule Requirements:Ability to work various shifts and days including nights, weekends and holiday periods to meet business needs. Responsible for inspecting, installing, troubleshooting, and repairing electrical components, alarm systems, light systems, building electrical systems, and sound systems Benefits: 3 weeks paid vacation (6 sick days, 8 paid holidays) Several medical coverage options to fit your needs best 401K match Maintenance-specific scholarships available FREE entry to ALL our parks and water parks! Perks: Yearly maintenance appreciation week celebration Complimentary tickets for friends and family Discounts on food and park merchandise Full-time and part-time employee events and gatherings Responsibilities: Electronics Technicians install and maintain telephone systems, radio communication systems, communications lines, including the ride PA systems and speakers and wiring for park area sound, various digital and microprocessor controlled devices, video surveillance systems, and electronic shooting galleries, if any; repair, overhaul, troubleshoot, modify, fabricate, and test various types of electronic equipment and related devices, such as animatronic controls and park lighting systems; troubleshoot those systems and all electronic wiring circuits; take test readings; and use tools and common test instruments in the course of those tasks. Adheres to and enforces all Carowinds and specific Park policies and procedures, including safety, attendance and EEO policies, and demonstrates commitment to customer service in all aspects of employment Qualifications: Knowledge, Skills & Abilities:Basic knowledge of electronics installation and maintenance, including sound system installation and setup, lighting hanging, cable dressing, and animatronic controls Education:High School Diploma or GED License or Certification:Electronics Technician Certification Experience: Less than 1 year of experience. Equivalency: Directly related experience or a combination of directly related education and experience and/or competencies may be considered in place of the above requirements.

Cintas is seeking a Maintenance Technician I to assist with maintaining an industrial laundry facility. Responsibilities include assisting with repairing, maintaining, installing and troubleshooting industrial equipment, systems and components including, but not limited to, washers, dryers, steam tunnels, conveyor systems and boilers; assisting with performing preventive/predictive maintenance; resolving safety concerns; performing indoor and outdoor housekeeping; monitoring inventory supplies and maintaining maintenance records. **Skills/Qualifications** Required + 2+ years' experience repairing industrial processing equipment in an industrial environment or in the military + Ability to read maintenance literature printed in English + Experience with and ability to read a blueprint + Basic Microsoft Office computer skills + Ability to stand for up to 7 hours in an 8 hour shift + High School Diploma/GED Preferred + Boiler knowledge + HVAC experience + Experience and ability to perform welding activities including MIG, TIG, ARC, cutting and brazing Benefits Cintas offers comprehensive and competitive medical, dental and vision benefits, with premiums below the national average. We offer flexibility with four different medical plan options; one plan is offered at zero cost. Additionally, our employee-partners enjoy: - Competitive Pay - 401(k) with Company Match/Profit Sharing/Employee Stock Ownership Plan (ESOP) - Disability, Life and AD&D Insurance, 100% Company Paid - Paid Time Off and Holidays - Skills Development, Training and Career Advancement Opportunities Company Information Cintas Corporation helps more than one million businesses of all types and sizes get Ready to open their doors with confidence every day by providing products and services that help keep their customers' facilities and employees clean, safe, and looking their best. With offerings including uniforms, mats, mops, towels, restroom supplies, workplace water services, first aid and safety products, eye-wash stations, safety training, fire extinguishers, sprinkler systems and alarm service, Cintas helps customers get Ready for the Workday. Headquartered in the U.S., Cincinnati, OH, Cintas is a publicly held Fortune 500 company traded over the Nasdaq Global Select Market under the symbol CTAS and is a component of both the Standard & Poor's 500 Index and Nasdaq-100 Index. Cintas Corporation is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), national origin, age, genetic information, disability, protected veteran status, or any other characteristic or category protected by local, state, or federal law. This job posting will remain open for at least five (5) days. **Job Category:** Maintenance **Organization:** Rental **Employee Status:** Regular **Schedule:** Full Time **Shift:** 2nd Shift

In the Carolinas and across North America, we have improved the efficiency, comfort, security, and dependability of thousands of buildings since the 90s for owners, operators, and occupiers. With over 500 personnel spread over ten locations, we provide services across the Carolinas. To serve our clients around North America, we have a carefully screened list of subcontractor partners and in-house project managers outside of the Carolinas. To service their whole North American portfolios, we are the go-to supplier for many of the biggest hotel chains, banks, utilities, and businesses in the country. Position Overview The Controls Service Technician is responsible for the installation, maintenance, and repair of building automation and HVAC control systems. This role ensures that systems operate efficiently and effectively to provide a comfortable environment while optimizing energy consumption. Key Responsibilities Install and configure building automation systems and HVAC controls. Perform routine maintenance and troubleshooting of control systems. Ensure compliance with industry standards and regulations during installations. Provide technical support and training to customers on system operations. Collaborate with project managers and other technicians on system upgrades and installations. Document service work and maintain accurate records of repairs and maintenance activities. Qualifications Proven experience in building automation, HVAC systems, and DDC controls. Strong knowledge of various control systems, including Johnson Controls, Trane, Honeywell, and Siemens. Familiarity with networking protocols such as N2 and N4. Ability to read and interpret technical documents, schematics, and diagrams. Excellent problem-solving skills and attention to detail. Relevant certifications in HVAC or building automation systems preferred. Benefits Medical/Dental/Vision Insurance 401k with Employer Contributions PTO Paid Holidays Employee Assistance Program Long-term Disability Short-term Disability Flexible Spending Plan Health Savings Plan Email Your Resume In Word To Looking forward to receiving your resume through our website and going over the position with you. Clicking apply is the best way to apply, but you may also: victoria.jackson@cybercoders.com Please do NOT change the email subject line in any way. You must keep the JobID: linkedin : VJ1-1834180L667 -- in the email subject line for your application to be considered.*** Victoria Jackson - Executive Recruiter For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 12/20/2024 and applications will be accepted on an ongoing basis until the position is filled or closed. CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at Benefits@CyberCoders.com to make arrangements.

Field Service Technician - Level IV Position Type: Full-Time | Day Shift Travel: Up to 85% (Majority Air Travel) About the Role We are hiring Field Service Technician - Level IV professionals with advanced expertise and high autonomy. This senior-level role involves solving complex CNC system issues, supporting new technology rollouts, and mentoring customers and distribution partners. Key Responsibilities: Lead advanced troubleshooting and root-cause analysis of CNC machinery Perform high-level installations of new and introductory Okuma models Implement complex retrofits and engineering improvements Serve as escalation support beyond distributor capabilities Develop detailed technical manuals, bulletins, and “how-to” documentation Maintain strong customer relationships through expert-level support Provide detailed reporting and feedback to Okuma service leadership Qualifications: Associate Degree in Electronics or equivalent advanced experience 7+ years of CNC machine tool service experience (Okuma strongly preferred) Expert-level knowledge of CNC controls, PLCs, servo systems, and automation FANUC CNC & Okuma-Howa product knowledge preferred Proven technical writing and documentation experience Skills & Competencies: Expert-level diagnostic and troubleshooting capability Advanced interpretation of mechanical and electrical drawings Proficiency with advanced precision diagnostic tools Exceptional communication and customer-facing skills Ability to work autonomously with minimal supervision Additional Notes: No weekend work (Monday-Friday schedule) Candidates can be located anywhere in the U.S. Must provide 2 professional references Background check & drug screening required (including marijuana; no violent offenses)

About the Company The Field Service Technician Level 2-4 is responsible for troubleshooting and repairing various client products and installing high-tech machinery when necessary. This includes diagnosing issues in mechanical alignment, hardware, software, peripheral devices, and automation. The technician will provide feedback to management and customers through detailed trip reports and will assist in creating technical manuals to improve the troubleshooting ability of distribution network. This role directly contributes to the success of the customer service department by resolving complex issues beyond the scope of distribution's capabilities. About the Role The Field Service Technician Level 2-4 is responsible for troubleshooting and repairing various client products and installing high-tech machinery when necessary. Responsibilities Travel to Customer Sites: Troubleshoot and repair client products as needed. Install new equipment and retrofits, including design improvements. Provide technical support for installation and repairs via phone or email. Documentation & Reporting: Generate technical bulletins, repair manuals, and provide detailed trip reports. Adhere to all company policies, safety practices, and provide feedback to management. Qualifications Experience/Education: Associate's Degree in Electronics or equivalent experience. Minimum of 5 years' experience in CNC controls, servo systems, PLCs, automation, and mechanical systems (e.g., machine tool theory, hydraulics, pneumatics). 5+ years of prior experience with machine tools. FANUC CNC experience (preferred). Okuma-Howa product knowledge (preferred). Technical writing experience (preferred). Required Skills Technical: Proficient in precision measuring and diagnostic equipment (laser, ball bar, micrometers, etc.). Strong troubleshooting and analytical skills. Basic mechanical and electrical skills. Ability to read blueprints and electrical schematics. Proficiency with PC tools (Outlook, Word, Excel). Basic knowledge of hand tools, electrical/mechanical devices (e.g., multimeters, oscilloscopes, forklifts). Preferred Skills FANUC CNC experience. Okuma-Howa product knowledge. Technical writing experience. EOE

Pay: $27.88/hr (Full Travel Reimbursement and 1.5 times overtime pay when you travel to locations) Full Time Permanent Job Title: Field Service Mechanical Technician The Field Service Mechanical Technician's primary function is to travel to customers' locations to perform on-site installations, servicing, and repairs for commissioning or warranty work on customer-finished products. Anticipated travel is 50-75% of the time, by car and/or plane. When not traveling, this role will work on the production floor to build and assemble parts, pipe fitting, and enclosures. Handle, move, load, and unload material, mostly heavy metal, by hand or using a variety of material handling equipment, including forklifts and overhead cranes in a high trafficking manufacturing environment. This role reports to the Field Services Site Supervisor. Key Responsibilities: Read and interpret drawings, blueprints, sketches, diagrams, and product specifications, and understand tolerances to determine assembly operations. Rig, hoist, move, and align sub-assemblies and components to storage areas or within the worksite using overhead cranes and forklifts, using established safety precautions. Fit and assemble simple and complex parts to build heavy industrial machinery and equipment according to drawings and product specifications. Install major components such as tanks, louvers, dampers, large-scale frames, generators, insulation, soundproofing systems, and building panels using hand and power tools. Inspect, test, examine, and investigate parts, sub-assemblies, and finished products to ensure quality and detect irregularities and malfunctions. Assist with documentation control and following company policies. Handle, move, load, and unload products and materials by hand or using material handling equipment, including forklifts, overhead cranes, and tow motors, operating established safety precautions. (Material handling) Provide feedback on design improvements through communication with the Supervisor and assist in preparing Engineering Change Requests. Ensure standards for safe working conditions are observed following OSHA, and participate in regular safety talks. Perform a visual inspection of equipment, including cranes, forklifts, cutters, and other tools, to ensure they are in safe working condition. Mentor and assist junior production members and other employees. Qualifications & Experience: Minimum 3-5 years experience in a heavy industrial equipment environment and mechanical assembly. Certificate in Crane and Forklift Operation. Previous experience working within an ISO9001 environment is preferred. Should be able to lift between 50-75lbs. Additional Requirements: Demonstrate knowledge and an understanding of OSHA. Understand how this position impacts the quality of products and services our customers provide. Ability to travel 50-75% within the US. Produce quality work (on-spec., on time, on a budget). Participate pro-actively in the continuous improvement process. Be self-motivated with a positive attitude and the ability to multi-task. Work well within a team environment. Strong problem-solving and analytical skills. Excellent organizational, interpersonal, and communication skills. Maintain a professional, clean and safe work area. Valid US passport preferred.

This position is for a travel Cath Lab Technologist specializing in Interventional Radiology and Cardiology on a 13-week contract in Salisbury, NC. The technologist assists providers during diagnostic and interventional procedures, maintains sterile fields, and participates in urgent and emergent care within a team setting. Required qualifications include certifications in BLS, ACLS, and ARRT or RCIS, with a minimum of two years of relevant experience. ARMStaffing is seeking a travel Cath Lab Technologist for a travel job in Salisbury, North Carolina. & Requirements Specialty: Cath Lab Technologist Discipline: Allied Health Professional Start Date: Duration: 13 weeks 40 hours per week Shift: 8 hours, days Employment Type: Travel Cath Lab Tech - Interventional Radiology Location Not specified Assignment Duration This is a 13-week contract position. Schedule Day Shift: 5x8-Hour (07::00) Job Description We are seeking a skilled Cath Lab Tech specializing in Interventional Radiology. The ideal candidate will assist providers while performing diagnostic and interventional radiology and cardiology procedures, maintaining a sterile field while scrubbing and circulating within the lab. The Cath Lab Tech will be part of a team responsible for providing urgent and emergent care, specifically focusing on interventional radiology procedures. Responsibilities Scrub and circulate for IR/Cath Lab and cardiology procedures. Assist providers during diagnostic and interventional procedures. Participate in weekly on-call coverage, every third week for STEMI and urgent procedures. Work within a three-member team, including at least one RN per shift. Adhere to medication administration protocols, as RN only. Required Experience / Certifications / Licensure Minimum of 2 years of experience in Interventional Radiology. Certifications: BLS, ACLS, and either ARRT or RCIS. Experience in performing EKG lead placement preferred. Why ARMStaffing? At ARMStaffing, we take care of our employees! We offer: Health Benefits: Day-1 access to Medical, Vision, Dental, Life, and more Onboarding Made Easy: We handle physicals, titers, and more so you can focus on care Clinical Support: In-house clinical team available to assist and advocate 401k Retirement Plan: Eligible after waiting period; 4% match with 5% contribution Recruiter Matching: Get paired with a recruiter based on your location and specialty Extras: Travel reimbursement, housing allowance, meals, referral bonuses, and more We're not the only ones who think ARMStaffing should be your first choice. Here's why: SIA's Top-50 Fastest Growing Healthcare Staffing Firms - 2019 SIA's Largest Healthcare Staffing Agencies in the U.S. - 2023 Top Workplace in the Lehigh Valley - 2022, 2023 Perfect scores for 'Name, Not a Number' and 'Recruiters' Personalities' on Highway Hypodermics We've earned The Joint Commission's Gold Seal of Approval for healthcare staffing 15 years strong and counting! Contract & local rates may vary based on location and applicant residency. Ask your ARMStaffing recruiter for details! ARMStaffing Job ID #. Pay package is based on 8 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Radiology:Interventional Radiology,07:00:00-15:00:00 About ARMStaffing Allied Resources Medical Staffing (ARMStaffing) places the most qualified medical professionals in the industry, including: local and travel contract, temp-to-perm, per diem, and direct-hire personnel. As a leader in medical staffing, we cover every segment of the healthcare market and take pride in our ability to exceed our clients' expectations. We accomplish this through our total dedication to our clients and field associates, our over 15 years of experience, a strong and diverse poor of medical professionals, and the high level of loyalty of our internal staff. We also make it a point to develop and maintain close relationships with staffing and office managers to ensure clear communication and proper placements based on the client's criteria. This allows us to tailor our services to best suit the staffing needs of our clients, while placing our employees in positions that match their abilities and preferences. Our goal is to offer unparalleled service to our valued healthcare clients, regardless of facility size or location, and to maintain a top-notch workforce of qualified, dedicated and medical professionals. The Experts in Healthcare Recruiting Local and travel contracts Temp-to-perm employment Direct-hire personnel Per Diem Staffing for every segment of the healthcare industry including, RNs, LPNs, and CNAs, and Allied Health Professionals Long-term contracts, block scheduling and per diem staffing options 24-Hour customer service and on-call support 365 days a year Full-time, registered nurse on staff to provide screening, background, and reference checks Long-term and temporary career options with outstanding employee benefits Medical Benefits Company-matched 401K Keywords: Cath Lab Technologist, Interventional Radiology, Cardiology Technologist, Travel Healthcare Jobs, Diagnostic Procedures, ACLS Certified, BLS Certified, ARRT Certification, Healthcare Staffing, Radiology Technician

Malone Healthcare - Nursing is seeking a travel Cath Lab Technologist for a travel job in Salisbury, North Carolina. Job Description & Requirements Specialty: Cath Lab Technologist Discipline: Allied Health Professional Start Date: Duration: 13 weeks 40 hours per week Shift: 8 hours, days Employment Type: Travel IR / Cath Lab Tech - Days | 5x8s (07:30-16:00) CROSS POSTING - Job ID#RTO AFTER BOOKING IS NOT ALLOWED - Any additional RTO or call-offs may result in cancel/DNR. Techs start directly on the unit every Monday until Dimensions training is completed. Shift & Contract Shift: Days, 5x8s, 07:30-16:00 Hours: 40 hours/week (13-20 week contracts accepted) No holiday RTO allowed Float Requirement: None Weekend Requirement: Every 3rd weekend Call Requirements Weekday Call: 16:00-07:30, 2x per week for 2 weeks each month Weekend Call: Fri 16:00 - Mon 07:30, 1 weekend/month No weekday call the week after weekend call Callback time: STEMI: 30 minutes IR: Based on procedure type Call Team: 3 staff members (one must be an RN) Required Experience / Skills Minimum Experience: 2 years Traveler Experience: Not required Locals Accepted: Yes Required Skills: Scrub Circulate Telemetry IR experience is mandatory (unit is ~90% IR) Certifications Required: ACLS BCLS ARRT or RCIS Preferred Skills / Certs Perform EKG lead placement ARRT Advanced, RCES, RCIS with Med experience Unit & Case Mix Combo Lab: Interventional Radiology / Cardiology / Vascular / EP Approximate split: 80% IR / 10% Other cardiology/vascular/EP Patient Population: Adults, geriatrics Common Diagnoses/Devices: Pacemakers, ICDs Duties: Assist providers during diagnostic & interventional procedures Scrub & circulate for IR, Cath Lab, and cardiology cases Medication administration performed only by RNs Equipment Used GE MAC Lab Philips iFR/IVUS Canon & GE labs AngioJet Penumbra EKOS Inari CSI Atherectomy system Bovie system for implants Plasma Blade cutter RF ablation unit Venous closure unit SonoSite S2000 US IABP Impella Orientation / Training 40 hours (up to 80 hours) Scrubs provided Must start on the unit every Monday before Dimensions training Interview Requirements Interview availability for the next 72 hours MUST be included with submission. Manager will not offer without an interview. About Malone Healthcare - Nursing With a commitment to providing a higher standard of service and experience in patient care, Malone Healthcare places expert nurses and allied health professionals in rewarding careers throughout the United States. As a leading healthcare staffing agency, Malone's focus on compliance and integrity translates to a seamless experience for our team members and partner facilities. When you work with Malone Healthcare, you can rely on over 50 years of proven experience placing exceptional professionals in quality healthcare settings. Benefits Weekly pay Holiday Pay Guaranteed Hours Continuing Education 401k retirement plan Pet insurance Referral bonus Medical benefits Dental benefits Vision benefits License and certification reimbursement Life insurance

The Compressed Air and Vacuum Systems Service Technician serves as an ambassador for the Company and is responsible for repairs and maintenance of compressed air and vacuum equipment residing on client property. Services are performed on-site and on-demand, to ensure complete customer satisfaction. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Perform daily equipment checks to diagnose and repair problems with compressed air and vacuum equipment before they occur. Perform annual and semi-annual maintenance and testing on compressed air and vacuum systems. Respond to emergency calls during normal operating hours and outside of normal operating hours. Program, troubleshoot microprocessor and PLC-based equipment controls. Resolve customer initiated technical issues. Ability to startup and troubleshoot compressed air and vacuum equipment. Work at customer site. Build and maintain client relationships. Serves as a technical resource to customers. Partner with company sales representatives and management to increase service and aftermarket business. Ability to travel to assist other company technicians as needed. Complete daily reports and maintenance checklists as required and send them to the customer and company admin team. Candidates with prior field experience with compressed air systems are encouraged to apply. Factory certifications for any type of air compressors would be beneficial, but not mandatory. Competencies Strong Mechanical and Problem Solving Skills. Good Communication, Customer Service and Consultative Skills. Strong work ethic with ability to work under minimal supervision. Reliable and punctual Able to use computer and service software. Must have own hand tools; however, the company can furnish. Company service truck provided. Must live within 2 hours of the Rocky Mount, NC facility located at 140 N Business Ct. Willing to train the right candidate. Supervisory Responsibility This position has no direct supervisory responsibilities but may serve as a coach and mentor for other service technicians learning about compressed air and vacuum systems. Work Environment This job operates in Hospital Facilities, Industrial Plant or Service Shop environments. This role routinely uses hand and power tools as well as office equipment such as laptop computers, and smartphones. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. Specific vision abilities required by this job include close vision and ability to adjust focus. This position would require the ability to lift up to 50 pounds unassisted occasionally. Ability to climb and work on ladders and scaffolding. Position Type/Expected Hours of Work This is a full-time position. Days and hours of work are Monday through Friday, but candidate must be able to work flexible hours. Evening and weekend work may be required as job duties demand. Travel Local travel is expected with this position 100% of the time. Required Education and Experience High school diploma or equivalent. Must have Mechanical Aptitude. Previous work history with a service based organization. Additional Eligibility Qualifications Certifications, such as Asse 6040, preferred but not required. The ability to pass government background checks and regular drug screening. Refrigeration Experience a plus but not required. Required License and Certifications Must have a valid, unexpired driver's license. Good driving record.

Our client is currently seeking a Engineering & Maintenance Technician II for their CPG Manufacturing facility located near Salisbury NC. This is a 4-day work week, working 10-hour days Mon-Thurs. The Maintenance / Engineering Tech will work closely with the Maintenance Manager & Engineering Team to install, repair, and fabricate plant equipment along with monitoring the performance of plant equipment to revise & generate maintenance programs & schedules and make corrective actions. This is a newer, automated facility and the company offers a competitive salary & benefits that are 90% paid for & 3-4 weeks PTO to start. Interested Candidates should contact Lee Douglas @ ************ or email a current resume to ****************** This job will have the following responsibilities: Operate basic repair and maintenance equipment. Monitor the performance of manufacturing and packaging equipment and take corrective actions, such as repairs Promptly bring to the attention of Maintenance Manager or VP of any problems that may be beyond one's skill set. Assist as necessary with independent repair and maintenance contractors. Assist with equipment rebuilds, upgrades and installations Monitor and perform basic repairs and maintenance on the manufacturing, warehousing, and the office facilities Maintains safe and clean work environment by following current good manufacturing practices (cGMP), and standard operating procedures; complying with legal regulations; monitoring environment. Qualifications & Requirements: High School Diploma / Trade School Certifications Preferred 2+ Years of Manufacturing Experience - Food / Beverage / Personal Care Products / Consumer Packaged Good Preferred Ability to read, write and trouble shoot simple electrical wiring problems. Ability to perform minor level mechanical and electrical repairs to manufacturing equipment, packaging. equipment, packaging equipment, pumps, fans, facility mechanical systems etc. Ability to assist with equipment installation. #JDP

A Blake & Pendleton Service Technician provides maintenance/repair support for its customers. Blake & Pendleton customers operate in a varied type of industries, such as manufacturing, utility, forestry, mining, etc. Blake & Pendleton primarily supports Sullair compressed air equipment but also provides support for many other equipment designs. Therefore, the Service Technician must possess a high degree of experience and a desire to improve these skills as equipment modifications change. Service Technicians must have the necessary safety training and certifications as determined by industry agencies (example OSHA, MHSA, etc). Service Technicians have a fixed schedule for work but also may be required to deviate from schedule per customer's request as well as required to work on call using an assigned rotating schedule by the Service Manager. Technicians are frequently required to lift over 50 lbs and occasionally exceed 100 lbs., climb ladders, carry buckets of lubricants weighing between 25 lbs & 55 lbs, bend as well as work after hours and in inclement weather. Requirements ELECTRICAL KNOWLEDGE: Skilled in troubleshooting 120V control circuits. Must be able to read and comprehend wiring diagrams. Must be able to troubleshoot and repair single phase and 3Phase motor control circuits up to 480V, such as full voltage, reduced voltage and soft starters as well as 3 phase and single phase motor troubleshooting. Must be able to properly use multimeters, ampmeters and infared meters. Must be able to successfully perform the above while meeting the Company and Customer's safety requirements. MECHANICAL KNOWLEDGE: Read and comprehend P&I drawings. Troubleshoot and repair various air compressor control components. Must be able to perform routine maintenance such as oil changes, cleaning and setting controls. Must be able to set up rigging equipment and safely remove and reinstall motors, compressors and associated components. Must be able to perform motor alignments. Must be able to safely use all hand tools and power tools such as drill motors, grinders, band saws, etc. Must have understanding of hydraulic and pneumatic principles and components. Knowledge of different types of piping such as types of copper, black and galvanized. Knowledge of threading, sweating, brazing and welding a plus. Must be able to bend and install control tubing such as 1/4" and 5/16" Stainless Steel tubing. REFRIGERATION: EPA certifications with Freon experience a plus. RESPONSIBILITIES Job Duties include but are not limited to: Perform quarterly, semi-annual and annual preventive maintenance Accurately assess trouble calls and repair machine(s) Perform start-up on newly installed machine (s) Check in with Service Coordinator daily Submit completed timesheets and service tickets to Service Coordinator daily Attire worn is a clean company uniform daily as well as display a professional demeanor Maintain clean service truck Must maintain a level of physical fitness to safely do the job as well as operate a company service truck, etc.

About the Company Reagents, a TCPA company is a leading manufacturer and distributor of specialty chemicals, reagents, and analytical testing solutions for over 50 years. About the Role The Maintenance Technician is responsible for managing and/or performing facility activities such as building/site/equipment maintenance and improvements on main facility systems. Responsibilities Maintains and assures the proper function of the facility and its mechanical, electrical, plumbing, HVAC, and fire alarm systems, including repairing malfunctions of any of the components in and around the facility. Performs all minor maintenance (painting, carpentry, masonry work, plumbing needs, etc.). Assists in establishing routine preventative maintenance program for all physical plant areas and equipment. Coordinates service with outside vendors as needed and monitors service providers. Manages and completes all internal work requests from employees in a timely manner. Inspect and repair equipment and systems. Perform a variety of maintenance tasks, assisting with repairs and supporting overall maintenance operations. Perform minor repairs on various pieces of equipment and facilities to ensure ongoing operations of the facility. Keep accurate and up-to-date records pertaining to repairs and cleaning schedules, and reports status of maintenance to management. Perform preventative maintenance and cleaning of equipment to ensure safe reliable operation and make suggestions for improvement. Help production teams and operators in the event of equipment malfunctions. Works with all departments in accordance with quality, safety, and sanitation standards, policies and guidelines. Operate within a cGMP regulated environment, managing documentation associated with facility, equipment and parts changeout. Qualifications Three or more years of experience in facilities maintenance or a related field. Strong attention to detail. Previous forklift and scissor lift experience/certification a plus. Previous experience working in a cGMP environment a plus. Equal Opportunity Statement TCPA is proud to be an equal opportunity employer. EEO Statement: We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state/province, or local law.

*For a quick application text APPLY1 to 82174* *About Dent Wizard* Dent Wizard is the nation's undisputed leader in automotive reconditioning services and vehicle protection products - and our success is the result of the great people who serve our customers. We're stable, growing and have a strong business model, with opportunities in 43 states, 2.5 million vehicles repaired every year and more than 3,000 highly skilled employees. Help us reach new heights and receive the respect, rewards and recognition you deserve. *Window Tint Technician - Full Time* *Location:* Charlotte, NC *Pay:* $45.000 - $55.000/ Year- Commision Based *Are you a car enthusiast who loves helping others customize their vehicles and improve driving comfort?* Dent Wizard is looking for dedicated *Window Tint Technicians* to join our team. We look forward to brightening your future as you tint our customers' windows and enhance their safety and comfort behind the wheel. *Job Responsibilities* * Install window tint on customer and dealership vehicles using quality products and trusted techniques for optimal results. * Select appropriate tools, equipment, and parts for each job. * Maintain company-provided vehicles, tools, and equipment according to standards. * Monitor tinting product inventory to ensure availability and minimize waste. * Accurately read tape measures and use basic hand tools. * Perform work safely and accurately in compliance with OSHA and EPA regulations. * Keep the work environment clean and organized by properly storing tools and equipment after each job. *Job Skills & Qualifications* * *2+ years of window tinting experience* * Ability to read and follow instructions * Experience working with various types of automobiles * Skilled in cutting tint by hand * Ability to lift up to 25 pounds * Exceptional attention to detail * Valid driver's license The compensation offered for this position will depend on qualifications, experience, and geographic location. The starting compensation is expected to be: $18.00 - $20.00/HourWe offer a competitive & comprehensive benefit package including: paid time off, medical, dental, vision, and 401k match (50% on the dollar up to 7% of employee contribution). For more information on our benefit offerings, please visit our Dealer Tire Family of Companies [Benefits Highlights Booklet]( *EOE Statement: *Dent Wizard is an Equal Employment Opportunity (EEO) employer and does not discriminate on the basis of race, color, national origin, religion, gender, age, veteran status, political affiliation, sexual orientation, marital status or disability (in compliance with the Americans with Disabilities Act*), or any other legally protected status, with respect to employment opportunities. *ADA Disclosure: Any candidate who feels that they may need an accommodation to complete this application, or any portions of same, based on the impact of a disability should contact Dent Wizard's Human Resources Department to discuss your specific needs. Please feel free to contact us at ...@dentwizard.com.

Responsive recruiter Benefits: Bonus based on performance Competitive salary Free uniforms Role: Lead Home Service Technician in Gaston County, NC. TruBlue Home Service Ally is a national franchise with over 120 locations that provides trusted handyman repairs, home safety upgrades, and maintenance services to help seniors age in place and support busy families. With locations across the U.S., TruBlue is a leader in dependable, relationship-based home maintenance. This is a role for a skilled professional who leads by example, brings out the best in others, and takes pride in work that makes a real difference. What You'll Do Perform high-quality home maintenance and repair projects Lead, coach, and support a team of Tru-Pro technicians Uphold TruBlue's high standard of professionalism, reliability, and customer care Communicate clearly with customers and help manage expectations on-site Ensure safety, accuracy, and consistency across every project Common projects include: Bathroom and kitchen upgrades Drywall repair and patching Flooring installation and repair General carpentry Interior and exterior painting Basic plumbing and electrical (within scope) Who You Are 10+ years of hands-on home repair or construction experience Experience managing or mentoring other technicians is preferred Strong communication and problem-solving skills Committed to doing the job right and doing right by your team and clients Valid driver's license, reliable transportation, and full toolset Fluent in English and legally authorized to work in the U.S. What You'll Get Year-round, consistent work Reliable hours and flexible scheduling Company vehicle and TruBlue gear (varies by location) Strong office and leadership support A team culture built on compassion, trust, and professionalism A leadership role with room to grow Why TruBlue We're a company with a purpose: to make homes safer and lives easier. You'll be joining a team that supports you, respects your expertise, and values the role you play in helping customers live better at home. TruBlue Home Service Ally ️ provides a unique and affordable approach to helping busy adults and seniors live a worry-free life by offering trustworthy handyman, home maintenance and senior modification services. Helping you maintain your home both inside and out, TruBlue's services include: handyman projects and to-do list chores, preventative home maintenance programs, seasonal work, and senior modification services, all handled by a professional and insured Tru-Pro ️ Technician. Thank you for considering a position with TruBlue. All locations are independently owned and operated. Service offerings, certifications, and licenses vary by location. T.B. Franchising Systems, Inc. is not affiliated, connected or associated with TruPros International, Inc. or any of its services. All inquiries specific to employment at this location should be made directly to the franchise location, and not to TruBlue Home Service Ally Corporate office.

Job DescriptionBenefits: Bonus based on performance Competitive salary Free uniforms Role: Lead Home Service Technician in Gaston County, NC. TruBlue Home Service Ally is a national franchise with over 120 locations that provides trusted handyman repairs, home safety upgrades, and maintenance services to help seniors age in place and support busy families. With locations across the U.S., TruBlue is a leader in dependable, relationship-based home maintenance. This is a role for a skilled professional who leads by example, brings out the best in others, and takes pride in work that makes a real difference. What Youll Do Perform high-quality home maintenance and repair projects Lead, coach, and support a team of Tru-Pro technicians Uphold TruBlues high standard of professionalism, reliability, and customer care Communicate clearly with customers and help manage expectations on-site Ensure safety, accuracy, and consistency across every project Common projects include: Bathroom and kitchen upgrades Drywall repair and patching Flooring installation and repair General carpentry Interior and exterior painting Basic plumbing and electrical (within scope) Who You Are 10+ years of hands-on home repair or construction experience Experience managing or mentoring other technicians is preferred Strong communication and problem-solving skills Committed to doing the job right and doing right by your team and clients Valid drivers license, reliable transportation, and full toolset Fluent in English and legally authorized to work in the U.S. What Youll Get Year-round, consistent work Reliable hours and flexible scheduling Company vehicle and TruBlue gear (varies by location) Strong office and leadership support A team culture built on compassion, trust, and professionalism A leadership role with room to grow Why TruBlue Were a company with a purpose: to make homes safer and lives easier. Youll be joining a team that supports you, respects your expertise, and values the role you play in helping customers live better at home.

Central Transport is one of the nation's most trusted and technologically advanced Less-Than-Truckload (LTL) carriers. With an ever-growing network of terminals nationwide, our team of dedicated professionals provide safe and efficient service to the United States, Canada, and Mexico. Our Growth is Creating Great Opportunities! Our team is expanding, and we want to hire the most talented people we can. Continued success depends on it! Once you've had a chance to explore our current open positions, apply to the ones you feel suit you best and keep track of both your progress in the selection process, and new postings that might interest you! Thanks for your interest in working on our team! Central Transport is an industry leading Less-Than-Truckload (LTL) transportation carrier. We are one of the nation's largest LTL carriers and have experienced significant growth over the last several years. As we continue to expand our network, we are seeking quality mechanics to help maintain our fleet of over 2,200 tractors, 8,500 trailers, and 1,700 forklifts across the United States and Canada. Position Available: * Forklift Service Technician - Performing routine and preventative maintenance on our fleet of electric forklifts* What Central Offers: Industry Leading Pay Starting at $28+/hr. Medical, Dental, PTO, Paid Bereavement Leave, Paid Jury Duty Leave, Weekly pay. Now Offering Blue Cross Blue Shield Blue Care Network! Free Uniforms Provided Responsibilities Include: All forklift repairs needed Troubleshoot and diagnose electrical issues Component rebuild and hydraulic repair Perform routine maintenance such as checking batteries, lubricating equipment, and machinery Tire changes Brakes Bolt-on components Job Requirements: 1 year of experience Basic set of tools ASE certification preferred but not required If you're interested and would like to learn more, please call at ************* ext. 2358 or submit your resume!

Job Description Lead Service Technician - HVAC $10,000 Sign-on Bonus Available!* In 2009, Keith, our founder, took a bold step away from the traditional HVAC world, frustrated by the status quo. He founded Charlotte Heating & Air with a simple yet powerful mission: to exceed expectations-not just in our work, but in the way we treat our customers. Fast forward to today, and we've built a solid reputation on trust with vast majority of our business coming from referrals and loyal clients. As we continue to grow, we're looking for one key addition to our team! Someone who shares our customer-oriented mindset and has the passion to continue perfecting their craft. If you're the type of person who thrives in a supportive, fast-paced environment and is driven to make a real difference, we want to hear from you. We take great pride in the quality of our work and the satisfaction it brings to our customers. But don't just take our word for it-read our reviews to see what others are saying about their experience with us! **************************************** Job Title: Lead Service Technician - HVAC Work start and end time: 8:00am - 5:00pm Monday to Friday (Some Weekends and Overtime, as needed) Pay Scale: $ 35.00 - up per hour plus bonuses and spiffs! Benefits of working at Charlotte! Health savings account Medical Cost Sharing Paid vacation 401K with company match Uniform provided Work vehicle Free financial advising from certified professionals Great company culture & quarterly team events Year-round employment Great Work/Life Balance Local family Owned and managed! Position Summary: To provide maintenance on residential heating and air conditioning systems according to company standards providing the customer with a high quality experience. Provide training and expertise to junior service techs. Required Qualifications: High school diploma or its equivalent Valid driver's license Be familiar with a wide range of equipment and troubleshooting techniques. Experience making repair and replace recommendations. Advanced customer service skills. Demonstrate willingness to accept responsibility and leadership roles. Knowledge of air balancing principles and techniques. Reading blueprints is not required NATE is a bonus but not required Qualifications desired: Universal EPA Certification 4+ years experience Insurable driving record Possess tools needed

Pay Type: Hourly Rate: $18 - $25 Depending on Experience Qualifications: High school graduate or equivalent Be available, willing and able to work overtime and weekends as needed Have a great attitude, excellent people skills, and provide excellent customer service Reports to work on time in a clean, complete uniform Be trustworthy, dependable and honest Be a self starter and able to work unsupervised Be able to pass background check Valid Driver's License and satisfactory driving record Can read and follow product label usage instructions Experience in the restoration or construction industry not required but preferred good verbal and written and communication skills Experience with using mobile software to enter data Must be able to prioritize activities and meet deadlines IICRC Certifications are not required but preferred: WTR - Water Damage Restoration Technician ASD - Applied Structural Drying Technician Position Overview: Candidate monitors, inspects and completes tasks for Water and Mold Restoration jobs from start to completion. This person needs to be able to provide All Dry level customer service including but not limited to: going over the job scope with the homeowner, explaining the reasons why we are doing what we are doing, processes being used, reviewing timetables with the homeowner, etc. Prepare and review documentation within our current CRM and estimating software to include: Notes, photos and documents according to company policies and procedures to ensure reimbursement by insurance companies. Common math skills will be taught in training such as square foot calculations, linear foot calculations, etc. you will be asked to perform the tasks below daily or weekly: Job Responsibilities: Maintains professional appearance at all times, keeping uniform clean Records time via recording apps provided and approves time cards on a weekly basis. Truck Maintenance - Ensures it is kept clean, routine maintenance is performed, and the vehicle is properly stocked with equipment and supplies. Cleans and maintains equipment to keep in proper safe working order. Reports any equipment malfunction and or damage to supervisor. Pre Job Truck Prep - Ensures all needed equipment and supplies for job are on the truck Explain processes used to complete active jobs and next steps to resolution in person to customers Completes assigned jobs according to company processes while maintaining quality control on each job Performs water damage repair to include water extraction, pack-out of contents, removing/disposing of non-salvageable materials, light construction and demolition as directed by supervisor Ensures equipment, supplies, vehicles, and products are properly handled. Inspects jobs after completion and obtains customer signatures for approval purposes, and requests payments when necessary Performs daily monitoring and tasks on assigned water jobs to residential and/or commercial customers with urgency Responsible for making daily adjustments to the drying plan based on meter readings Resolves issues with customers, communicates customer issues, daily job activities with supervisor and key company staff Completes documentation and pictures on time according to company policies and procedures to ensure reimbursement from insurance companies Any other tasks assigned by Supervisor Job Requirements: High school graduate or equivalent Experience in the restoration or construction industry not required but preferred Valid Drivers' License and satisfactory driving record Good verbal and written and communication skills Good customer service skills Experience with using mobile software to enter data Can read and follow product label usage instructions Reports to work on time in a clean, complete uniform Must be able to prioritize activities and meet deadlines IICRC Certifications are not required but preferred: WTR - Water Damage Restoration Technician ASD - Applied Structural Drying Technician Experience: Water Mitigation, 1 year+ (Preferred) Customer service 2 years+ (Preferred) License: Valid Driver's License (Required) IICRC Certification WRT (Preferred) Physical Demands and Working Conditions: The physical demands are representative of those that must be met by an employee to perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Incumbent must be prepared to: Move up to 70 pounds often, by lifting, carrying, pushing, pulling, or otherwise repositioning objects. Stand and walk for extended periods of time. Lifting, squatting, crawling and crouching is required. Express or exchange ideas with others quickly, receive and act on detailed information given. For safety reasons, respirators, which are used in certain situations, must be able to seal to your face Use visual acuity to perform detail-oriented activities Be exposed to various inside and outside working conditions: The change of environment such as with or without air conditioning and heating. Disclaimer The above statements are intended to describe the general nature and level of work being performed by associates assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. The Company reserves the right to modify this description in the future, with or without notice to the employee. This Job Description does not create an employment contract, implied or otherwise, and employment with the Company remains at will. These responsibilities are subject to possible modification to reasonably accommodate individuals with disabilities. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location Work Remotely No Job Types: Full-time, Part-time Salary: From $18.00 per hour Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance Schedule: 8 hour shift On call Overtime Weekend availability Supplemental pay types: Bonus pay Commission pay Experience: Water damage restoration: 1 year (Required) Construction: 1 year (Preferred) Mold remediation: 1 year (Preferred) Work Location: On the road Compensación: $18.00 - $25.00 per hour The IICRC is the Institute of Inspection Cleaning and Restoration Certification, a non-profit organization for the Inspection, Cleaning, and Restoration Industries. The IICRC, originally named the International Institute of Carpet and Upholstery Cleaning Inc. (IICUC), was founded in 1972 by Ed York. Since starting in 1972, the IICRC has evolved into a global organization with more than 49,000 active Certified Technicians and more than 6,500 Certified Firms around the world. The IICRC is managed by its Board of Directors, which is composed of 15 industry leaders elected by the IICRC's Shareholders. The Board of Directors' function is to represent the various interests of the applicants while leading the direction of the organization. The Board of Directors meets four times per year and is tasked with the responsibility of helping shape future policies of the organization and uphold the standards that help shape the industry.