Technician jobs in Lubbock, TX

Required Skills & Experience · High School Diploma or GED from an accredited institution. · Minimum of three (3) years of Power Systems, Battery technologies and/or Electronics experience (coursework and internship experience apply). · Must possess and maintain a valid and unrestricted state driver's license. · Can lift 50+lbs Frequent travel to customer sites is required, with up to 25% of drive-time expected. Nice to Have Skills & Experience · Associate's degree in Electrical, Electronics, or related field from an Accredited Institution or currently enrolled in a Bachelor's degree in Engineering program from an accredited institution. · Ability to read schematic drawings and knowledge of troubleshooting, test and repair techniques. Electrical Technology Certificate from an accredited institution Job Description The Field Service Engineer will provide on-site technical support, maintenance, and troubleshooting for Eaton's power systems and battery technologies. This role requires hands-on work, frequent travel to customer sites, and strong problem-solving skills to ensure optimal performance of electrical systems. Install, maintain, and repair Eaton power systems, battery technologies, and related electronic equipment at customer sites. Perform diagnostics and troubleshooting on electrical systems using schematic diagrams and test equipment. Conduct preventive maintenance and system upgrades to ensure reliability and compliance with Eaton standards. Document service activities including work performed, parts used, and recommendations for future maintenance. Provide technical support and training to customers on proper operation and maintenance of Eaton equipment. Ensure safety compliance during all service activities, adhering to Eaton and customer safety protocols. Manage travel schedules efficiently to meet service commitments, with up to 25% drive-time expected. Lift and transport equipment weighing 50+ lbs as required for installations and repairs. Collaborate with internal teams to escalate complex issues and coordinate parts or resources for repairs.

The Low Voltage Cabling Technician for Megawatt Construction is responsible for installing, staging, testing, and maintaining structured cabling systems and related hardware within data center fit-out projects. This role includes copper and fiber cabling installation, equipment staging and inventory control, quality assurance, and support of overall data center infrastructure deployment. Key Responsibilities Installation & Deployment Install, route, and secure structured cabling including Cat5e/6/6A, coax, and fiber-optic (single-mode and multi-mode) cables. Build and install racks, cabinets, ladder racks, cable trays, cable baskets, and fiber raceways. Terminate copper and fiber cables to industry standards (TIA/EIA, BICSI, manufacturer specifications). Install patch panels, cable managers, equipment shelves, and associated hardware. Label all cables and infrastructure according to project documentation and QC requirements. Equipment Staging & Inventory Management Assist in receiving, unpacking, and verifying incoming materials, hardware, and equipment. Maintain accurate inventory of cabling, connectors, ladders, hardware, consumables, and tools. Prepare and stage racks, patch panels, cable bundles, and equipment assemblies for installation. Track material usage and report shortages or replenishment needs to the project manager or warehouse team. Organize storage areas to ensure efficient material flow and easy access during project execution. Testing, Verification & Quality Assurance Perform copper and fiber testing using certification tools (e.g., Fluke DSX, OTDR). Troubleshoot cabling faults, continuity failures, polarity issues, and signal loss. Document test results, as-built information, and changes for turnover packages. Maintain high-quality installation standards through proper cable dressing and pathway management. Project Coordination & Documentation Read and interpret blueprints, rack elevations, cable schedules, and scope-of-work documents. Coordinate with project managers, network engineers, electricians, and GC teams to complete tasks on schedule. Follow all change control processes and installation guidelines. Update daily job logs, material tracking sheets, and progress reports as required. Safety & Compliance Follow all data center safety protocols, access rules, and PPE requirements. Ensure installations comply with NEC, local building codes, and industry standards (TIA, BICSI). Maintain organized, hazard-free work areas. Qualifications & Skills Preferred 1-3+ years of experience in low-voltage cabling or structured cabling installation. Hands-on experience with copper and/or fiber termination and testing. Familiarity with data center environments, cable containment systems, and rack build-outs. Experience with inventory handling, warehouse coordination, or equipment staging. Ability to read construction drawings and follow technical documentation. Strong communication skills and attention to detail. BICSI Installer or Technician certifications (INST1, INST2, TECH). Experience in critical facility or live data center environments. OSHA 10/30 or equivalent safety certifications. Experience with Fluke DSX testers, OTDRs, and fiber inspection equipment. Physical Requirements Ability to lift 50 lbs or more. Ability to work on ladders, lifts, and in confined spaces. Ability to stand, bend, pull cable, and perform repetitive tasks for extended periods. Work Environment Fast-paced construction and commissioning environments. Work may require nights, weekends, or off-hour shifts based on project demands. Collaboration with internal and external trades and stakeholders.

Job Title: Automotive Technician / Mechanic We are looking for technicians / mechanics who are energetic, upbeat, and have a positive attitude. The technicians we are looking for have to seek out solutions to tough problems with a strong passion for doing what's right for our guests. Responsibilities include, but are not limited to: Technicians use their knowledge & skills to diagnose and fix vehicles for our guest Continuously build experience as an automotive mechanic across a wide range of domestic and foreign vehicles Complete full, accurate, and honest courtesy vehicle inspections Work as part of a team to troubleshoot guest concerns quickly and effectively Follow and promote our high standards of safety, cleanliness, and organization Work closely with the service department and effectively communicate concerns Work together with other technicians to solve problems, meet deadlines, and deliver distinguished results Qualifications Qualifications: Positive attitude and a desire to serve guest 3+ years of experience as an automotive technician/mechanic ASE Certifications preferred, or a plan to achieve Capable of diagnosing and repairing all makes/models of vehicles Meet or exceed hourly goals Aptitude for learning additional skills and processes Professional appearance and strong communication A desire for long-term career development Physical Requirements: Occasionally lift and/or move over 100 pounds Be able to work with tools on vehicles lifted above their head Work in tight spaces as dictated by the vehicle's needed repair Have the needed dexterity in order to efficiently use hand tools Walk/stand for the majority of their workday Drive manual transmissions vehicles Efficiently navigate a computer Additional Information Christian Brothers Automotive (CBA) began in 1982 with the simple premise of providing precision auto repair with transparency, integrity and a philosophy of people first. All 300+ CBA locations offer a modern facility equipped with manufacture-level diagnostic equipment and the latest factory scan tools. CBA shops also offer their technicians a consistent workload, free training, full-time live technician support and access to our private Technician Assistance Center. Thank you for viewing this opportunity! This job posting is for an opening at a Christian Brothers Automotive location that is independently owned and operated by a local licensed franchisee. Your application and any information included with it will be submitted to the franchisee for further handling. Christian Brothers Automotive Corporation ("CBAC") is a separate business entity. No CBAC employee will be involved in any decisions regarding your employment application. If you are hired for this position, you also understand and acknowledge that the local franchisee will be your employer and that CBAC will not be your employer. The local franchisee is solely responsible for all decisions related to your employment, including hiring, firing, discipline, compensation, scheduling and supervision. All of your information will be kept confidential according to EEO guidelines. Christian Brothers Automotive is an Equal Opportunity Employer. Christian Brothers Automotive locations practice "At-will" employment practices. PandoLogic. Category:Automotive, Keywords:Automotive Technician, Location:Hockley, TX-77447

About The Navy's Advanced Electronics / Computer Field (AECF) offers extensive training in electronics, computer systems, radar, communications, and weapons fire control systems, including the Navy's advanced missile systems and Aegis radar. These technicians are essential to the ship's Combat Systems department, ensuring readiness for combat operations across the fleet. Responsibilities As an Electronics Technician (ET) or Fire Controlman (FC), you may: Maintain and repair radar, communication, and navigation equipment. Operate, maintain, and repair fire control radars, mainframe computers, large screen displays, LANs, weapon control consoles, and automatic gun systems. Troubleshoot and repair electro-mechanical systems used in weapons systems. Support combat systems readiness aboard aircraft carriers, Aegis cruisers, and other surface ships. Work Environment ETs and FCs serve on fleet units worldwide and at shore-based repair facilities. Expect assignments aboard ships, at remote stations, and in technical repair shops. Work is highly technical, requiring precision and teamwork. Training & Advancement Apprentice Technical Training - Great Lakes, IL (11 weeks) FC Strand - Great Lakes, IL (16 weeks) ET Strand - Great Lakes, IL (22 weeks) Training covers electronics theory, radar systems, communications suites, missile and gun system ballistics, troubleshooting, and fiber optics. After "A" School, technicians may attend advanced "C" Schools. College credits are often available for Navy training. Education Opportunities Navy College Program & Tuition Assistance Post-9/11 GI Bill College credits via the American Council on Education Industry-recognized certifications through Navy COOL Department of Labor apprenticeships via USMAP Qualifications & Requirements U.S. citizen, eligible for security clearance Normal hearing and color perception Strong aptitude in math, computing, and electronics Ability to work as part of a team and perform detailed technical work Pay & Benefits Competitive salary Enlistment and re-enlistment bonuses Free health insurance & housing Retirement plan Paid training

Based out of Granbury, Texas, BC Tech Pro partners with techs all over the country to complete on-site hardware warranty services in their territories. If you love working on computers and want to get out from behind a desk, come work with us! Job Description This is a Computer Field Technician Position doing hardware repairs and installations on laptop and desktop units. To be successful in this position, you must have prior experience with laptop and desktop hardware. Job Details: This is a 1099/per call position Pay is based solely on the number of calls completed. Calls start at $35 and go up based on distance traveled Pay period: Every Friday after the first week worked Tickets are run Monday-Friday during the day shift. Candidates must be regularly available a minimum of 3 weekdays to be considered. Call volume is variable but is usually 2-5 calls per day You will complete certifications from Dell and Lenovo as part of your onboarding. Certifications are online and free to you. You must have a reliable form of transportation and a valid driver's license to run these calls. You will be visiting multiple work sites throughout your day. You must have access to a computer and the Internet to log onto your portal each day. You must be available to log into your tech portal each morning you are working by 9 am to code your calls and map out your route for the day. The manufacturer has completed troubleshooting and shipped a part prior to your ticket being issued to you. You will confirm service times with the customer in your tech portal. Services will be completed at the customer site (residential and commercial) You will pick up parts daily from the assigned Fed Ex or UPS store for your territory before going onsite. Once all calls are completed for the day drop off the old parts with the pre-paid label that is provided. Qualifications Must have prior hands on experience with replacing components on laptops and desktops Must have a valid driver's license and reliable transportation Must be comfortable with daily local travel Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description Thompson Engineering has a full-time opportunity for a Survey Instrument Technician. The Surveyor Instrument Technician provides support to the Surveyor Party Chief in the daily responsibilities of the land surveying department. This position is responsible for collecting survey data using designated survey equipment. Ideal candidates must be willing to travel to support project needs. Duties: Operates total station, digital and automatic level, Topcon data collector, TDS software. Collect data for field level notes which is reported to the Surveyor Party Chief. Assist in loading and unloading survey equipment from the company vehicle. Ability to travel and stay overnight based on the workload of the Survey Department. Conduct all work activities in compliance with Thompson Holdings, Inc. Health, Safety & Environmental Management System, safety policies & procedures, safety execution plans and Job Safety and Environmental Analyses. Attend and pro-actively participate in monthly safety meetings, project toolbox safety meetings and safety moments. On time and consistent attendance is required. Minimum Requirements Five (5) years verifiable experience in surveying commercial and/or heavy industrial construction stakeout. Must have working knowledge of GPS software using the Topcon Hyperlite. High school diploma or equivalent. Must have a valid Driver's License Must have a TWIC card Be able to read and comprehend measurements. Intermediate math skills which include trigonometry and coordinate geometry. Must be able to communicate effectively with others. Must be able to understand and follow verbal and written instructions. Ability to travel and stay overnight based on the workload of the Survey Department Physical Requirements Ability to work in the outside elements of the field up to 100% of the time. Must be able to lift a minimum of 50lbs. Required to remain standing for a minimum of eight (8) hours per day and walk long distances. Must be able to bend, stoop and climb on a ladder. Must be able to drive a company vehicle to and from job sites. About Thompson Engineering Thompson Engineering was formed in 1953 to provide quality assurance for construction projects related to industrial, infrastructure, and community development. As a drilling, materials testing, construction inspection, and chemistry laboratory firm, we supported the engineering and construction industry. Our early years were building blocks that allowed us to get our feet wet - literally - performing services along the Gulf Coast's rivers, bayous, and streams. Today, Thompson Engineering is known for leadership on projects defining skylines, coastlines, and transportation lines. We support clients in the industrial, commercial, transportation, federal, and municipal markets. While we are still one of the first companies on project sites conducting environmental assessments, land surveys, and geotechnical studies, our design teams are close behind. We now deliver cutting-edge solutions to complex infrastructure and building requirements. And our project management and construction management services mean we are often one of the last teams to leave. From start to finish, we are a proven leader in the planning, design, and construction of major transportation, economic development, and waterfront projects across the Southeast. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Love Your Mondays again! Join the Future of Connectivity with Metronet! We have an immediate opening for an energetic; Fiber Technician in Lubbock, TX! As a Fiber Technician you will be responsible for performing basic to advanced installations, disconnects and service changes for residential and business customers for high-speed internet services, phone, and TV. You will provide basic troubleshooting and repair for services from the fiber terminal, or the ONT to consumer's electronic devices (TV, Modem, and Wireless devices etc.). ESSENTIAL JOB FUNCTIONS: You will install and troubleshoot all MetroNet services from the terminal to Customer Premise Equipment (CPE). You will provide in-depth customer education on all MetroNet products and services. You will earn commissions by explaining Metronet services and products to all customers. You will be professional with customers and fellow associates. You will work towards meeting key performance metrics. Other job-related duties as requested * Subject to all applicable state and federal laws JOB QUALIFICATIONS AND REQUIREMENTS: High School Diploma or GED. We Look for experience with a telecom / fiber company preferred but not required. Physical ability to work from a kneeling or standing position for long periods. Physical ability to work various in conditions, including working in attics, crawl spaces, and in adverse weather conditions. Physical ability to climb ladders with proper equipment up to 25 feet (safety belt, safety strap, hard hat, and other equipment as needed). Able to lift and carry loads of up to 75lbs including ladder. Ability to work with basic hand tools and other specialized equipment with training. Operate and maintain company vehicle/equipment safely and professionally. Valid driver's license/satisfactory driving record Willingness to work as a team and independently. Must be legally authorized to work in the U.S. ADDITIONAL JOB REQUIREMENTS: Perform on-call rotation duties after regular business hours. Available to work overtime when deemed necessary, including holidays and weekends. Available to travel for training or as needed. Total Rewards: 80% of Medical premiums paid for by the company Company-paid Disability and Life insurance EAP (Employee Assistance Program) 401(k) company match dollar for dollar up to 6% Equipment and resources provided on day one Opportunities for advancement Professional development programs Associate perks and discounts Discounted MetroNet service in our serviceable area And more! Job specific perks: Company-paid logo attire/uniform Tools, equipment, and training provided Company vehicle and fuel card Cell phone allowance Join us and find out what it means to love your career! At Metronet, we are committed to delivering cutting-edge technology combined with exceptional customer care. Our 100% fiber-optic technology ensures that we provide our customers with some of the fastest internet speeds in the world. As industry leaders in fiber-to-the-premise TV, voice, and internet services, we're not just focused on expanding our networks-we're focused on enriching the lives of those we serve. We value our associates because they are the cornerstone of our success. By joining the Metronet family, you're stepping into a rewarding career in technology with a company dedicated to your growth and success. We're in it to win it, and a key part of our strategy is to strengthen our business-to-business technology sales team with talented and hard-working individuals who aspire to be the next generation of technology leaders. Recognized as one of the Best Places to Work, we offer a competitive total compensation package, including 80% of medical premiums paid by the company, company-paid disability and life insurance, and a 401(k)-company match with immediate vesting. Plus, enjoy discounted services within our coverage areas and thrive in a locally owned, friendly, and fun atmosphere. Discover more with Metronet - a company where your success builds stronger communities, and your future is limitless. Metronet is an equal opportunity employer. We will not discriminate against any applicant or employee on the basis of sexual orientation, gender identity, race, gender, religion, age, national origin, color, disability, or veteran status. EOE/Minority/Female/Disabled/Veteran #LI-OS1

Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. **If you are a current associate of Primo Brands, please apply via my ADP or Success Factors.** Compensation: $22/HR Location: Lubbock, TX Responsibilities + Reporting to the Field Operations Manager or Regional Director of Refill Operations, you play a key part in bringing that purpose to life. You do this by building high impact relationships with our customers, and ensuring our products, equipment, and services represent our brand each day. + Deliver our customer promise by performing maintenance, repairs and lab sampling with exceptional standards and care on water vending machines. + Respond to service calls in a timely manner. + Close service requirements with accuracy and precision and demonstrate a proactive approach in identifying opportunities to minimize machine downtime. + Serve as a Primo brand ambassador by nurturing quality relationships with existing and potential new customers. + Demonstrate knowledge about our products and services as well as provide exceptional customer experiences. + Lead with our customer promise in mind and be the voice of the customer back to the company. + Perform complex repairs & maintenance, including advanced diagnostics and troubleshooting. + Serve as a backup for open routes and special projects as needed for assigned region. + Provide training and project management support to assigned region. Qualifications + High School Diploma or GED preferred, or relevant experience with stable work history. + Previous experience in a customer facing role. + Exceptional customer service and communication skills. + Strong mechanical aptitude and computer literacy. + Excellent planning, time management, organization, and problem-solving skills. + Must possess a valid driver's license and acceptable driving record. + Must be able to obtain a DOT Medical Card. + Ability to apply concepts of basic mathematical skills and operate basic functions on a handheld scanner unit. + Advanced proficiency with math skills and diagnostic tools including handheld devices. + Ability to frequently lift and/or move 10 pounds; periodically lift and/or move up to 50 pounds. + Requires frequent travel to meet business needs. + Regional Utility Tech role may require substantial travel, including overnight, in larger regions to meet business needs. Primo Brands' established portfolio includes billion-dollar brands Poland Spring and Pure Life , premium brands like Saratoga and Mountain Valley , regional leaders such as Arrowhead , Deer Park , Ice Mountain Ozarka , and Zephyrhills , purified brands, Primo Water and Sparkletts , and flavored and enhanced brands like Splash and AC+ION . Our extensive direct-to-consumer offerings and industry-leading line-up of innovative water dispensers create consumer connectivity through recurring water purchases across Water Direct, Water Exchange, and Water Refill. At Primo Brands, our more than 11,000 associates are at the heart of what we do and deliver on our mission to provide healthy hydration to consumers wherever, however and whenever they want it. We believe in fostering a respectful culture, which values our associates who are deeply invested in quality hydration, our communities, and the sustainability of our packaging and water sources for generations to come. Primo Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law. Salary Range Disclaimer: The salary range provided for this position is an approximation based on market research, internal compensation data and the candidate's qualifications and experience. Final salary offers are determined through a comprehensive evaluation of candidate qualifications and may vary depending on factors such as skills, experience, and geographic location of the position. Other components of the compensation package, including benefits and bonuses, will also be considered. We are committed to fair and equitable compensation practices, and we encourage open dialogue about compensation during the interview process. Candidates must possess strong English language skills to effectively communicate with customers and provide exceptional service. Proficiency in English is essential for understanding customer needs, resolving inquiries, and collaborating with team members.

Job Description Raba Kistner, Inc. is a premier Engineering Consulting and Program Management firm. Our purpose is to build a better and more sustainable world for our employees, their families, our clients, and the communities we serve. Our Core Values are: Community "We care for our communities" Integrity "We act with integrity" Passion "We infuse passion into everything we do" Quality "We believe quality comes from a culture of innovation and continuous improvement" Growth "We dedicate ourselves to personal and business growth" Are you ready to take your construction career on the road and explore the wide-open landscapes of West Texas? Join our team as a Traveling Construction Materials Technician, where you'll be traveling 100% of the time to support exciting projects from Abilene to Amarillo. This role is perfect for someone who thrives in the field, enjoys variety in their day-to-day work, and wants to grow with a company that values hands-on experience and professional development. We offer a competitive salary, full benefits, company vehicle, per diem allowance, cell phone stipend, and company-paid certifications to help you advance your career while working across the region. This position is responsible for conducting field or laboratory testing, sampling, and/or inspection services. Other responsibilities include: Communicate with dispatcher/coordinator to ensure priorities and deadlines are met in both the field and laboratory. Meet with supervisors of contractors, engineer/architect representatives and/or other project leads on project sites to discuss and coordinate testing, sampling or inspection of construction materials or construction procedures. Following safety protocols, ensure safe utilization, storage and maintenance of all nuclear gauges and field equipment. Communicate project progress and delays to supervisor and dispatcher. Submit accurate and complete testing/inspection reports on a daily basis. Drive company vehicles to job sites in a safe manner. Perform other duties as assigned. Qualifications Possess a valid driver's license within the applicable jurisdiction and meet firm's auto insurability requirements. Traveling Construction Materials Technician II: At least 1 year of applicable experience in the materials testing and inspection industry and possess at least 2 or more industry certifications Traveling Construction Materials Technician III: At least 3 years of applicable experience in the materials testing and inspection industry and possess 3 or more industry certifications Relevant industry certification from ACI, NICET, TXDOT, ICC, PTI, or other comparable industry certifications as approved by hiring manager. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to read and understand instructions, labels, reports, etc. Good oral and written communication skills including the ability to write short correspondences, notes, letters and memos. Must be safety minded and willing to put safety first in performing all duties. The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. While performing the functions of this job, the employee is occasionally required to sit, frequently required to stoop, kneel crouch or crawl, regularly required to stand, walk, climb, balance, and talk. Continuously required to use hands and reach. Occasionally required to lift and/or move up to 70 pounds with or without assistance. Specific vision abilities required by this job include close vision, far vision, color vision, peripheral vision, focus vision, depth vision. Work environment includes potential exposure to movement of heavy equipment on construction or roadway sites; potential exposure to hazardous dangerous chemicals and solvents, noise, dust, fumes, grease and oils, radiant and electrical energy, and vibration; all of which would require the employee to implement and follow proper safety procedures and utilize appropriate protective equipment. Regular use of non-complex machines and equipment and hand tools such as sledgehammers, shovels and picks. Work assignments are frequently performed outside in all weather conditions. This position may require protracted or irregular hours. Flexibility to work irregular hours is necessary due to client needs. EOE/Disabled/Veteran Drug Free Workplace

at PriorityOne Group Commercial Equipment Technician (Beverage/Espresso) Lubbock, TXDescriptionResponsible for performing repair, maintenance, installation and/or refurbishment work for commercial beverage-related food service equipment such as coffee, tea, juice or espresso machines. Technicians will be provided with a company van, appropriate inventory to perform service calls and a work cell phone and tablet. Technicians must be comfortable with or willing to learn how to document all work performed on an iPad. This position is an excellent cross-over opportunity if you have any mechanical training (auto, plumbing, electrical, etc.) and are simply looking for a change. Learn more about us at *************************** Compensation and Benefits Typical pay range is $24.00-28.00 per hour based on experience and certifications Generous Time Away Program (PTO) Medical, Dental, Vision, Life Insurance, and 401k with a company match Enjoy the benefits of our Town Shares Program, giving you the opportunity to share in the long-term financial success of our company as you grow with us! Paid Training and career development opportunities Other benefits include company work vehicle, uniforms, company phone and iPad, dispatched from home, rotating on-call paid portal-to-portal Job Responsibilities Repair, maintain, install or refurbish equipment according to an established service schedule, company and factory standards and within acceptable time frames as well as troubleshoot and rectify potential problems on location. Apply knowledge of products and seek additional training and education as appropriate. Document legibly and accurately all work completed and submit such orders to office personnel according to company policy. Work closely with management to ensure timely scheduling of work. Maintain service vehicle in a clean manner at all times, perform preventive maintenance and maintain a vehicle logbook on service/repairs done on a routine basis. Keep vehicle stocked with a sufficient supply of parts and tools. Build and maintain customer relations in the field to ensure excellent customer service and enhance the company's image. Offer assistance and instruction to employees as needed. Train new employees on all aspects of the Field Service Technician position. Develop and implement quality control training for Field Service Technician employees Perform other related duties as assigned. RequirementsTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. As well as completion of a satisfactory background check and drug screen required Certificates and Licenses: Required licenses include a Valid Driver License and driving record that aligns with our safety standards, and a Refrigeration (EPA) universal license. Preference will be given to technicians with additional certifications such as CFESA Certifications and/or Journeyman Licenses or with training certificates from manufacturers and/or service representatives.Education/Experience: Must be at least 18 years of age. At least three years of related experience and/or training; or equivalent combination of education and experience.Communication Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.Math Ability: The employee needs the ability to work with mathematical concepts such as probability and statistical inference. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.Reasoning Ability: The employee needs the ability to define problems, collect data, establish facts and draw valid conclusions. Ability to interpret and extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.Technology: To perform this job successfully, an individual should have knowledge of the internet, smartphones and tablets. Individual should have knowledge of Microsoft Word, Excel and Outlook or similar programs.Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. While performing the duties of this job, the employee will frequently be exposed to moving mechanical part, fumes or airborne particles, toxic or caustic chemicals, extreme cold and heat and the risk of electrical shock. Overtime and on call time may be required.Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands, and reach with hands and arms. The employee is frequently required to stoop, kneel, crouch and crawl. The employee must occasionally lift and/or move up to 75 pounds, walk, sit, stoop, kneel, crouch or crawl, talk, hear, taste and smell. PriorityOne Group is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

EARN MORE AT GENE MESSER FORD LUBBOCK! PRODUCTION BONUS AND MORE! Top Pay in West Texas + Relocation fee or Tool Credit Plan! Air Conditioned Shop! GENE MESSER FORD LUBBOCK is part of the fast growing Group 1 Automotive, a leader in automotive retail and service. We are growing and looking for Medium/Heavy Duty Truck Technicians/Mechanics to work with our Quality Dealership, representing a Quality Product! Our Service Technicians should be passionate about customer service, take pride in their work, and enjoy being part of a winning team that cares about their employees. We offer: A True Four Day Work Week Air Conditioned Shop Career path for growth and promotion Ford Certification curriculum to become a Master Technician A Great Working Environment with the Latest Equipment Structured, Self-paced and Paid Training Opportunities Leading to Manufacturer and Group 1 Recognition Health, Dental & Vision Insurance Life and Disability Insurance 401(k) with company match Paid Time-off Employee Vehicle Purchase Program Employee Stock Purchase Plan You need… Proven experience as a Medium/Heavy Duty Technician or Diesel Technician Strong diagnostic and troubleshooting skills ASE certification (preferred but not required) A Love of Everything Automotive A Positive & Friendly Attitude Tools Based on your Experience Communication Skills Basic Computer Skills Strong Desire to Provide an Exceptional Client Experience Ability to Achieve Targeted Goals High School Diploma or Equivalent Must have a Valid Driver's License Group 1 is a Fortune 250 company that owns and operates automotive dealerships and collision centers in the United States and the United Kingdom. We offer our associates a team environment, great benefits and ongoing training and support. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend! *All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment* Group 1 Automotive is an Equal Employment Opportunity employer and participates in E-Verify. Responsibilities Not ready to apply to a position? Sign-up to let us know about your interest in a career with Group 1 Automotive.

The Engineering Technician works with the Engineering team to provide technical support to Operations, utilizes and maintains equipment needed for inventory control and mapping, conducts drone surveys, generates reports, and is a support role to the Geology and Environmental departments. Functional Responsibilities Ø Exhibit a strong work ethic with the ability to take direction and work in a team setting and independently. Ø Adhere to Permian Basin Materials Code of Conduct and company policies. Ø Conduct regular monthly and as needed drone flight services for calculating aggregate inventory and mapping land contours. Communicate findings to appropriate manager and collaborate with management to verify accuracy or explain variances. Ø Generate reports of information gathered from the drone and other research assignments. Ø Utilize GPS equipment for surveying and identifying land boundaries. Ø Assist in data processing, mapping, and modeling. Ø Collect, sort, and prepare rock samples for testing. Ø Assist with Environmental department tasks (sample collection, site visits, inspections). Ø Support Geology department with field sampling, sample analysis (QC) and drilling. Ø Maintain accurate, timely records of test data, quality control results, and files for the Engineering department. Ø Complete special projects as assigned. Ø Comply with all Safety, Health, Environmental and other Company policies and procedures. Ø Perform other functions and duties as required. Competencies: Ø Possess background knowledge in drone operation, engineering or earth science. Ø Capable of conducting independent research. Ø Work well in a team or independently. Ø Pay close attention to detail. Ø Exhibit strong organizational skills. Ø Communicate clearly and effectively. Ø Understand and interpret drone related data and volumetric analysis. Ø Demonstrate ability to communicate technical material into layman's terms for explanatory purposes. Ø Exhibit solid customer service and interpersonal skills. Ø Demonstrate intellectual curiosity. Ø Exhibit familiarity with proper lab safety procedures. EXPERIENCE/TRAINING/CERTIFICATIONS Ø An Associate degree in Surveying, Engineering Technology, Earth Sciences or similar preferred. Ø A High School diploma required. Ø FAA unmanned aircraft licensing is required to be obtained within 1-2 months of hire and maintained during entirety of employment with PB Materials. Ø 1-3 years of experience in aggregate or related industry a plus. Ø Willingness to travel to his/her assigned locations within the Permian Basin and spend a significant portion of time in a mining environment. Ø A valid driver's license with no major violations that would exclude a person from driving for business as defined by our insurance carrier and company policy. Requirements PHYSICAL AND ENVIRONMENTAL REQUIREMENTS Ø Candidate must be drug free. Ø Position requires moderately strenuous physical work. Ø Must be able to: o Lift and carry up to 40 pounds from floor to 3' - 5' occasionally, o Sit or stand for extended periods of time, o Travel safely while walking over uneven terrain, roads, and pavement, o Use hands and fingers to operate computers and other office machinery, o Effectively communicate in verbal and written formats with internal and external personnel, clients, and vendors, o Wear proper protective equipment including hard hat, safety glasses, high visibility clothing, steel-toed boots, and gloves, o Observe all company Safety policies on company premises and while operating heavy construction machinery, o Occasionally work in extreme hot and cold weather conditions, o Work safely in wet, muddy, and slippery conditions occasionally, Ø Environment will vary from outdoors with varying noise levels and vibrations associated with construction equipment, and exposure to building materials, dust, and dirt at operating sites to a normal office environment.

Job Description Magrym Consulting Inc. is seeking a qualified Construction Materials Testing (CMT) Technician in Midland, Texas. As a growing company, technicians will have the opportunity to grow with us. Candidates should be willing to work overtime and weekends as required. Duties include: Soil and Aggregate Sampling Logging materials Perform Aggregate, Soil and Concrete Testing Lab and Field work Follow ASTM and AASHTO Standards Software data entry Geotechnical sample logging Maintaining a clean working environment Accurate recording of timesheets Daily travel to and from construction sites, generally within 100 miles from the home office The ability to train to achieve minimum certificates in ACI, NICET, and/or State Testing Certificates within 6 months of hire Ability to work outside in the vicinity of large construction equipment Ability to utilize hand tools such as sledgehammers, shovels and picks Observing and documenting field activities Maintain equipment and lab vehicles In-house equipment verification General Skills: Attention to detail Basic Math, Microsoft Suite skills Excellent communication with internal and external clients General maintenance skills Strong safety focus Physical Requirements: Ability to lift 60+ lbs Stand in one place for 1 to 2 hours at a time Ability to wear appropriate PPE for hazardous materials Wear steel toe shoes as needed Ability to work indoors and outdoors in all weather conditions Ability to reach with hands and arms, climb or balance, and stoop, kneel, crouch or crawl. At times, this position may be working at or on uneven terrain, varying heights, in confined spaces, or supported trenches. Requirements High School Diploma or equivalent Valid Texas Drivers License Clean driving record ACI Field Technician Certification (preferred) ACI Laboratory Technician Certification (preferred) ACI Aggregate Base Testing Technician Certification (preferred) Ability to pass a pre-employment/random drug test Associates or Bachelor degree in Civil Engineering, Architecture or Construction is a plus Benefits Dental insurance Health insurance Life insurance On-the-job training Paid time off Paid Holidays Paid training 401K Retirement plan Vision Insurance Dental Insurance Short Term/Long Term Disability

We at Bestica believe our success is a direct result of hard work and outstanding employee dedication. Our environment is dynamic, friendly, and collaborative. We foster a positive culture, where innovation and synergy are encouraged to build our workplace into a community of like-minded, passionate people. Bestica is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. If this opportunity aligns with your capabilities and career desires, please take a moment to visit our website at ****************

We at Bestica believe our success is a direct result of hard work and outstanding employee dedication. Our environment is dynamic, friendly, and collaborative. We foster a positive culture, where innovation and synergy are encouraged to build our workplace into a community of like-minded, passionate people. Bestica is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. If this opportunity aligns with your capabilities and career desires, please take a moment to visit our website at ****************

We are offering a competitive signing for the right person. We understand the great demand for veterans in this industry. Experienced & master certified Technicians are needed to add leadership to our team. We offer the most competitive compensation package in the Lubbock area -- and offer 5 day work weeks! What We Offer: HIGH volume shop - plenty of scheduling perks Signing bonus will be discussed Competitive Compensation Medical, Dental, Vision, Life and AD&D for both employee and family Vacation, Holiday, Illness PTO options Employee discounts RESPONSIBILITIES: Perform work specified on the repair order with efficiency and in accordance with dealership Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment Diagnosing, maintaining, and repairing vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc. Communicate directly with the Service Advisor so that customers can be informed if any additional service is needed. Providing an estimate of time needed for additional repairs Executing repairs under warranty to manufacturer specifications REQUIREMENTS: CERTIFICATIONS & previous experience at an automotive dealership Strong teamwork skills Valid in-state driver's license and automobile insurance. Clean driving record

Mewbourne's summer internship program provides a hands-on experience that transitions college students from the classroom to a comprehensive and fulfilling career. Mewbourne Oil Company internships help turn classroom theory into real-world practice. During your summer, you can expect hands-on training with industry professions while working, meaningful projects in your field. Innovation is at the heart of the oil & gas industry, and young professionals are at the heart of innovation at Mewbourne Oil Company. We're committed to giving students and young professionals support they needs to enjoy long careers in oil & gas. Click below to connect with us on potential summer internship opportunities.

Facilities Technician - Plant Maintenance - Levelland Responsibilities include operation and maintenance of plant equipment, building repairs and preventative maintenance activities. Requires average supervision. Providence caregivers are not simply valued - they're invaluable. Join our team at Covenant Hosp Levelland (Methodist Hosp Levelland) and thrive in our culture of patient-focused, whole-person care built on understanding, commitment, and mutual respect. Your voice matters here, because we know that to inspire and retain the best people, we must empower them. Please note the following important details regarding this position: + This role is an onsite position and will report onsite daily as scheduled. + This role requires for you to be located within a commutable distance of our office location listed below: + Texas: Levelland + Work Status Available: + Full Time + Shifts Available: + Day Required Qualifications: + Coursework/Training: On the job training and/or trade school education. + 2 years - Experience in semi-skilled maintenance and repair services for the facility such as mechanical, electrical, plumbing, and building systems. + 6 months - Experienced mechanic. + 6 months - Experienced carpenter. Preferred Qualifications: + Associate's Degree: Technical trade. + 2 years - Experience in a Healthcare setting. + 6 months - Experienced electrician. + 6 months - Experienced plumber. + Experienced painter. Why Join Providence? Our best-in-class benefits are uniquely designed to support you and your family in staying well, growing professionally, and achieving financial security. We take care of you, so you can focus on delivering our mission of caring for everyone, especially the most vulnerable in our communities. About Providence At Providence, our strength lies in Our Promise of "Know me, care for me, ease my way." Working at our family of organizations means that regardless of your role, we'll walk alongside you in your career, supporting you so you can support others. We provide best-in-class benefits and we foster an inclusive workplace where diversity is valued, and everyone is essential, heard and respected. Together, our 120,000 caregivers (all employees) serve in over 50 hospitals, over 1,000 clinics and a full range of health and social services across Alaska, California, Montana, New Mexico, Oregon, Texas and Washington. As a comprehensive health care organization, we are serving more people, advancing best practices and continuing our more than 100-year tradition of serving the poor and vulnerable. Posted are the minimum and the maximum wage rates on the wage range for this position. The successful candidate's placement on the wage range for this position will be determined based upon relevant job experience and other applicable factors. These amounts are the base pay range; additional compensation may be available for this role, such as shift differentials, standby/on-call, overtime, premiums, extra shift incentives, or bonus opportunities. Providence offers a comprehensive benefits package including a retirement 401(k) Savings Plan with employer matching, health care benefits (medical, dental, vision), life insurance, disability insurance, time off benefits (paid parental leave, vacations, holidays, health issues), voluntary benefits, well-being resources and much more. Learn more at providence.jobs/benefits. Applicants in the Unincorporated County of Los Angeles: Qualified applications with arrest or conviction records will be considered for employment in accordance with the Unincorporated Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. Requsition ID: 404350 Company: Covenant Jobs Job Category: Facilities Management Job Function: Facilities Job Schedule: Full time Job Shift: Day Career Track: Technical/Skilled Support Department: 8005 PLANT MAINTENANCE TX CHL LEVELLAND 1ST FLOOR Address: TX Levelland 1900 College Ave Work Location: Covenant Health Levelland Hospital Workplace Type: On-site Pay Range: $19.24 - $29.45 The amounts listed are the base pay range; additional compensation may be available for this role, such as shift differentials, standby/on-call, overtime, premiums, extra shift incentives, or bonus opportunities.

TEAM UP WITH US! The Rental Technician I is responsible for providing high quality repair service on equipment, in order to respond to customer needs in a positive, caring and timely manner and to ensure maximum value for work performed. DO YOU HAVE WHAT IT TAKES? WHAT YOU'LL DO: * Complete assigned jobs and tasks within Caterpillar Equipment Repair Labor Guidelines (ERLG) without sacrificing quality and/or safety. * Work safely and follow all WCAT safety policies and procedures. * Complete related paperwork and access databases required to complete job (work order, parts order, JSA, DBS, SIMS, SIS web, STW) accurately and timely. * Follow contamination control and HAZMAT rules and regulations. * Remove and install parts, disassemble and assemble components, clean and inspect assemblies with minimal supervision. * Understand and apply Cat reusability guidelines. * Submit parts and core returns in a timely manner with appropriate documentation. * Perform warranty downloads of ECM. WHAT YOU'LL NEED: * Specific CAT product line knowledge of natural gas engines, electrical, electronic, mechanical systems and components to include Preventative Maintenance Services. * Position requires basic knowledge of gas/diesel engines and EPG systems and troubleshooting. * Proficient use of basic hand tools, air tools, precision measuring tools and instruments, lap tops, diagnostic software and cranes and rigging equipment. * This position requires the ability to provide accurate quotes. * High school diploma or GED equivalent. * 1-3 years of related experience. * (Preferred) Associate's degree/certificate in diesel technology, or similar mechanical discipline. * Successfully complete Work Steps assessment. * Will be certified prior to operating a forklift and/or man lift. WHY WORK WITH US? * We like to take care of business and have fun doing it! * We offer health, dental, vision, life, and more as a comprehensive benefits package. * Don't you want to work with awesome people? IMPORTANT INFORMATION: While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is frequently required to climb or balance and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit or smell. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. The employee is regularly exposed to moving mechanical parts and toxic or caustic chemicals. The employee is frequently exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles and outside weather conditions. The employee is occasionally exposed to extreme heat; risk of electrical shock and vibration. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. Required travel up to 10%. This position is considered a safety sensitive position. The Job description is subject to change by the employer as the needs of the employer and requirements of the job change. EEO/AA Keywords: mechanic, heavy equipment mechanic