Technician jobs in San Luis Obispo, CA

The AOG Maintenance Technician works directly with the AOG Manager to ensure AOG, unscheduled and scheduled aircraft are supported at San Luis Obispo (KSBP) and in the field. This position is responsible for performing all maintenance projects assigned to them while ensuring their work is meeting the highest quality standards. When not working on AOG aircraft in the field, this position will be participating in unscheduled and scheduled maintenance in the Part 145 Repair Station. These activities must be done while maintaining a positive and productive relationship with ACI Jet's employees, vendors and clients. Irregular, yet frequent travel is required for this position, including overnight stays. Available hours must be flexible for on-call work, including nights and weekends. Hourly pay with OT compensation is negotiable, based on experience. Any employee that has accepted the position of AOG Maintenance Technician is required to competently perform within the following job description. An AOG Technician is responsible for performing aircraft maintenance assigned by the AOG Manager. Once they have been assigned the job, they are to set up and perform the maintenance. They are to communicate professionally and in a timely manner to the Shift Supervisor or AOG Manager. They are to perform the maintenance as described by the manufacturer's specifications and to the standards set forth by ACI Jet. They are to communicate any concerns or lack of capabilities to the Shift Supervisor or AOG Manager. Reports To The AOG Maintenance Technician - KSBP reports directly to the AOG Manager, as well as the on-duty Shift Supervisor. Requirements Essential Duties and Responsibilities Duties include the following (other duties may be assigned as required by management): Report daily to the AOG Manager or Shift Supervisor. Complete tasks assigned in accordance with the procedures set forth in ACI Jet's Air Carrier Operations Manual (ACOM). Coordinate with the AOG Manager or Shift Supervisor to ensure a safe and efficient repair and return to service of AOG and scheduled aircraft. Comply with all FARs, Operations Specifications, Company Policies and Company Procedures. Ensure appropriate technical data is used during the performance of maintenance, preventive maintenance and alteration activities. Ensure shop premises, AOG vehicles and work areas are maintained in a clean and orderly manner. Must follow airport, TSA and DOT requirements for operating a motor vehicle. Ensure all maintenance or alterations processes are appropriately completed and documented as required by the operator and in accordance with the applicable FARs. Submit all required work orders, reports, receipts, timecards (Paylocity) and other company forms and records to the AOG or Team Lead Technician in a timely and organized manner. Maintain a close, productive and beneficial relationship with ACI Jet managers, peers, colleagues, manufacturer's representatives, customers and other repair facilities. Ensure safety and quality of all assigned duties and responsibilities by actively and positively participating in ACI Jet's SQMS program. Must be available for unscheduled on-call/call-out maintenance events 24 hours a day, 7 days a week, including holidays, as part of a rotating on-call schedule. Scheduled time off is accommodated. Must be available to perform unscheduled AOG maintenance in the field at remote locations requiring travel and overnight lodging at hotels, when scheduled. Must document all maintenance performed in the Corridor maintenance records database correctly and accurately. Knowledge, Skills and Experience Required A passion for aviation. At least three years of AOG or unscheduled RON/Line station maintenance experience. Part 145 Repair Station experience a plus. Work experience must include troubleshooting, use of specialized tools, ground support equipment, and the use of aircraft maintenance manuals, parts catalogs, technical reports and forms. Professional appearance. Troubleshooting skills and an ability to problem-solve. Critical time management and logistical problem-solving skills. Attention to detail with a focus on safety and quality of work. On-call and after-hours support is required. High School Diploma or equivalent. Must have a valid A&P License. Must have a valid Driver's License. Must be able to work as a part of a team in a high-stress, fast-paced environment. Must be a self-starter, able to work with little to no guidance. Must be a highly motivated, detail-oriented, organized, with the ability to multi-task. Must be computer proficient (MS Office, Aviation Maintenance Software (Corridor)). Must be able to lift 50 pounds, climb, kneel, squat, and stand for extended periods. Must have your own tools and toolbox (basic hand tools). Must be available to be on-call. Must possess excellent communication and interpersonal skills including the ability to read, write and speak English. (Bi-lingual in Spanish is a plus). Must be able to provide proof of eligibility to work in the United States. Valid Passport is a plus. Preferred Type Experience Bombardier Global, Challenger 300 and 600-Series Citation CE-560, XL, XLS, CE-680 and CE-750 Gulfstream GIV, G450, GV, G550 and G650 Dassault DA2000 and DA900 Embraer EMB 100/500 and Legacy 135 Acceptable Type Experience All Gulfstream types All Cessna Citation types Dassault DA 10/20/50 Hawker 800/900 Learjet 20/30/45/60/75 King Air/Caravan/Pilatus/ PT-6 Piston aircraft Other This position is a DOT Safety Sensitive position, which will require placement in a random drug test pool. AOG Technician Level will be determined based on qualifications and experience. Pay $30.00 - $58.00/hour | DOE

JOB SUMMARY: The Senior Controls Technician requires expertise in industrial electrical systems, process instrumentation, and automation controls to support brewery operations. The ideal candidate will have hands-on experience working with 480V 3-phase systems, 120V circuits, PLCs, HMIs, and a strong understanding of process control systems, instrumentation calibration, and troubleshooting. In this role, you will be the primary resource responsible for maintenance, troubleshooting, and repair of electrical and control systems across the brewery. You will also play a critical role in the design review, installation, commissioning, and startup of new equipment, working closely with both the maintenance team and engineering department to ensure successful project execution and seamless equipment integration. ESSENTIAL JOB DUTIES AND RESPONSIBILITIES: Specifically, the responsibilities of the position include, but are not limited to, the following activities. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions: Install, maintain, troubleshoot, and repair 480V 3-phase power systems, 120V circuits, and 24V control systems. Read, interpret, and apply single-line diagrams, wiring schematics, P&IDs, and technical drawings to perform work safely and efficiently. Diagnose and resolve issues with equipment controls, including 24VDC systems, 4-20mA instrumentation loops, VFDs, sensors, and process control devices. Perform routine preventive maintenance, calibration, and performance testing on instrumentation and control systems. Support PLC programming, HMI configuration, and troubleshooting, and assist with control panel design, modifications, and documentation updates. Update wiring diagrams, schematics, and panel drawings as needed to reflect changes, repairs, or upgrades, ensuring all documentation is accurate and current. Ensure all equipment and panels are properly labeled to support clear identification and safe maintenance practices. Ensure compliance with electrical codes, safety regulations, and company policies during all work activities. Work closely with the engineering, maintenance, and production teams to minimize unplanned downtime, improve system reliability, and optimize equipment performance. Maintain accurate records and manage inventory of electrical, instrumentation, and control system parts and components. Coordinate and oversee work performed by outside contractors, ensuring adherence to site safety standards and proper documentation of all work. Assist with equipment installations, commissioning, and start-up, ensuring proper integration into existing control and power systems. Take ownership of projects and assignments as directed, proactively identifying opportunities for process improvement and reliability enhancement. Other duties as assigned. REQUIRED QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation Proven experience as an industrial electrician or controls technician, preferably in a manufacturing, food & beverage, or brewery environment. Proficiency with 480V 3-phase systems, 120V circuitry, and 24V control systems, including power distribution and motor controls. Hands-on knowledge of process instrumentation, including 4-20mA loops, temperature, pressure, and flow sensors. Familiarity with PLCs, HMIs, and control panel components, with the ability to assist with basic programming, configuration, and system modifications. Ability to read, interpret, and update single-line diagrams, wiring schematics, P&IDs, and other technical documentation. Strong troubleshooting and analytical skills, with the ability to quickly identify and resolve electrical, instrumentation, and control system issues. Solid understanding of electrical codes, NFPA 70E, and industry safety practices, including Lockout/Tagout (LOTO) and safe electrical work procedures. Ability to work from and interpret plans, drawings, prints, schematics, operating manuals, and repair manuals, ensuring proper installation and repairs. Experience with updating documentation, labeling panels and equipment, and maintaining accurate records of work performed. Highly motivated, self-directed, and able to work independently with minimal supervision while also being a collaborative team player. High attention to detail, accuracy, and precision in all work. Excellent communication skills, with the ability to effectively collaborate across maintenance, engineering, and production teams. Tion may be made to enable individuals with disabilities to perform the essential functions. WHAT FIRESTONE WALKER OFFERS: An excellent benefits package including: Competitive salary commensurate with experience and knowledge Base Salary: $30-45/hour 100% paid premiums for employees including medical, dental, vision, & life insurance Accrued PTO (rate of 13 days per year) Paid Sick Leave (48 hours max usage per year) 401(k) retirement plan including company paid profit sharing & 4% safe-harbor matching 10 paid holidays per year 50% off employee discount on food, beer, and merchandise Periodic beer giveaways for employees 21+ Inclusive company culture that values and develops our employees FSA plan to save tax money on out of pocket medical and dependent care expenses Please submit your resume with your work experience when applying. Firestone Walker is an Equal Opportunity Employer.

Company DescriptionJobs for Humanity is partnering with DISH to build an inclusive and just employment ecosystem. Therefore, we prioritize individuals coming from the following communities: Refugee, Neurodivergent, Single Parent, Blind or Low Vision, Deaf or Hard of Hearing, Black, Hispanic, Asian, Military Veterans, the Elderly, the LGBTQ, and Justice Impacted individuals. This position is open to candidates who reside in and have the legal right to work in the country where the job is located. Company Name: DISH Job DescriptionDepartment Summary Our Technicians deliver TV and Smart Home solutions to millions of customers. As a technician, we will train you to lead the charge for a world class customer experience, educating and connecting more Americans with every home you visit. You're the backbone of our organization and ensure an excellent customer experience. Our dedication to customer experience is paying off: in 2023, DISH earned the J.D. Power award for being #1 in Overall Customer Satisfaction for the sixth year in a row. Job Duties and Responsibilities What's in it for you? Guaranteed promotion after 6 months with a $1.00 per hour pay increase! Performance Incentives with the potential for up to $6,400 in your first year and $9,100 each following year! Paid training, paid time off & paid holidays 4-day work week with opportunities to work overtime Medical, Dental, Vision and Life Insurance packages and Health Savings Account Free DISH TV programming at a value of $114.99/month at your home, plus deeply discounted Sling TV and Boost Infinite phone plans 401(K) with company match & Employee stock purchasing program (ESPP) Tuition Reimbursement DISH-supplied van, tools, and uniforms Our greatest benefit is opportunity with over 400 of our current technician leadership starting as a technician. If you have grit and tenacity, you will grow quickly at DISH! Performance based promotions include an automatic 5% pay increase at level 2 and 10% at levels 3 and 4. What will you be doing? As a Field Technician, you will be representing DISH in customers' homes daily. We build our value by simplifying lives and using the DISH install to consult homeowners on their infinite smart home possibilities. Skills, Experience and Requirements All technicians must have: Aptitude to build rapport quickly. We want you to have a great time servicing our clients Ability to work at heights, including ladders up to 40 feet, and in all weather conditions Ability to lift over 70 lbs A valid driver's license in the state you are seeking employment with a driving record that meets DISH's safety standard Travel may be required Salary Range Compensation: $20.75/Hour Compensation and Benefits From versatile health perks to new career opportunities, check out our benefits on our careers website. Employment is contingent on successful completion of a pre-employment screen, to include a drug test and an acceptable driving record. Compensation listed may reflect a combination of hourly pay rate and location pay differential.

Full-time Description Are you passionate about working outdoors and making landscapes thrive? Oakridge Landscape is looking for a skilled Irrigation Technician to bring their expertise and energy to our dynamic team! If you have hands-on experience with irrigation systems and a knack for solving problems on the go, we want to hear from you. This role offers a clear path to advancement into a Foreman position, contingent upon successfully meeting all job expectations. Key Responsibilities Inspect, troubleshoot, and repair existing irrigation systems, including valves, timers/controllers, heads, pumps, and backflow devices. Perform seasonal system checks, including startups, shutdowns, and winterizations as needed. Monitor water usage and system efficiency; make recommendations for improvements or water-saving practices. Install new irrigation systems based on landscape and design plans, including layout, trenching, pipe fitting, and wiring controllers. Ensure proper programming of irrigation controllers to meet plant water requirements and local water conservation mandates. Maintain accurate records of inspections, maintenance work, and parts used. Respond promptly to emergency repairs or service requests. Communicate with clients, supervisors, and team members in both English and Spanish to ensure understanding and job completion. Requirements Required Skills & Qualifications At least 2 years of experience with irrigation systems in commercial settings. Class “C” Driver License is a must. Ability to prioritize and multi-task. Strong organizational skills/ Attention to detail. Problem-solving skills. Current CA driver license and outstanding record. Bilingual (English/ Spanish) is preferred. Physical Requirements and working conditions The physical requirement is working outdoors in various and sometimes harsh weather conditions-including rain, wind, intense heat, and muddy environments. Candidates must be comfortable performing tasks in these elements on a regular basis. Hearing: Adequate to perform the essential functions of the job. Speaking: Adequate to perform the essential functions of the job, such as communicating with multiple personnel. Vision: Normal visual acuity. Walking: Able to walk for a prolonged period outdoors. Stand: Able to stand, bend stoop, knell as needed during job walkthrough. Lifting to 50 lbs. Pushing up to 50 lbs.

Job DescriptionBenefits/Perks Competitive Compensation ( Job is piece-work pay.) Great Work Environment We are seeking a Telecommunications Technician to join our team! As a Telecommunications Technician, you will install new telecommunications systems, repair existing systems, and upgrade outdated equipment and systems. You will also troubleshoot systems that are having trouble, ensuring every system you touch is working properly. The ideal candidate has experience with telecommunications equipment, excellent communication skills, and enjoys problem-solving complex issues. Responsibilities Install new telecommunications equipment for customers ( Trenching, Boring, concrete cuts required) Qualifications Excellent customer service skills Previous experience with cutting and patching concrete is desired. Previous training in trenching or boring is needed. Previous experience with telecommunications equipment desired Strong analytical and troubleshooting skills Must be comfortable working on your feet, in tight spaces, and a variety of weather conditions

Scientific Drilling is looking for a Electronic Technician to join our Applied Technologies Center in Paso Robles, CA. Scientific Drilling is an independent directional drilling and wellbore navigation, surveying and logging service company serving customers in oil & gas and sustainable geothermal worldwide. We are motivated by crafting innovative solutions to technically challenging problems that support and advance our energy future. Nestled between San Francisco and Los Angeles, the California Central Coast is described as the happiest place on earth. The area features 200+ wineries, fresh air, miles of beautiful beaches, and small-town appeal. Our Electronic Technician will work in our Manufactuing team and is expected to perform the essential duties listed below. Candidates must have authorization to work in the United States. Essential Duties and Responsibilities: Tests electronic assemblies using a written procedure. Uses multimeters and oscilloscopes to measure voltages and waveforms. Troubleshoots test failures to board level. Writes failure reports. Works with Test Technicians to solve failures. Responsible for the electronic equipment and tools in his or her work area. Manages work station and practices good housekeeping techniques. May be required to work overtime. Pursues every job with drive and determination. Uses logic to solve problems with effective solutions. Performs other relevant duties as required. Job Knowledge, Skills, and Abilities: Must be able to identify electronic components on schematics and circuit boards. Must understand common electronic concepts, such as current, voltage, resistance, and Ohm's Law. Must be able to read and understand electronic schematics. The ability to use correct soldering techniques is a plus. Ability to present oneself with professional appearance and behavior in accordance with ATC dress code and SDI Code of Conduct. Ability to meet all SDI/ATC safety requirements. Ability to understand and follow instructions. Ability to read, communicate, and understand the English language. Computer proficiency. Ability to communicate effectively with managers and peers, both written and verbally. Adhere to established company procedures and policies, work schedule, attendance standards and is punctual to work and meetings. Contribute to team effort by accomplishing related results, as needed. Possess the ability to be interactive with management staff and co-workers. The ability to use a word processor and a spreadsheet is preferred. Education, Experience, Certification, and Training: Requires a high school diploma or its equivalent. An Associates Degree in Electronics or equivalent experience required. 0-2 years experience in the field of electronics preferred. Location, Physical Requirements, and PPE: Manufacturing: Ability to walk, stand, sit, kneel, push, stoop, reach above the shoulder, grasp, pull, bend repeatedly, identify colors, hear with aid, see , write, count, read, speak, analyze, alphabetize, lift and carry 25 lbs. and under, perceive depth, and operate motor equipment. Conditions include working inside. Working around moving objects, machines with moving parts. Working around radiant and electrical energy. Work with heated soldering iron and flux. Working closely with others, working alone, working extended or irregular hours. Working environment may include but not limited to, intermittent noise, fumes, smoke, grease, dust, oils and solvents. Equipment (machines, tools, devices) used in performing the essential job function include but not limited to computer and related equipment, calculator, special instrumentation, hand tools, power tools, air tools, microscope and telephone. Ability to wear proper personal protective equipment (PPE), including but not limited to, safety glasses, reinforced toed shoes, gloves, and ear plugs or muffs. This describes the general duties and responsibilities, and physical requirements associated with the position; it is not an exhaustive list of all duties, responsibilities, or skills required for the position. The general duties and responsibilities and physical requirements associated with the position are subject to modification in order to reasonably accommodate individuals with disabilities. Some physical requirements may exclude individuals who pose a threat or risk to the health or safety to themselves or others. This job description neither states nor implies that the listed general duties and responsibilities and physical requirements associated with the position are the only tasks expected of an employee. An employee is also required to follow any other job-related instructions and perform any other job-related tasks requested by their supervisor and not in violation of any applicable laws, regulations, or rules. Requirements are representative of minimum levels of knowledge, skills, and abilities. To perform this job successfully, an employee must possess the abilities and aptitudes to perform each duty, responsibility, and physical requirement proficiently. Employment at Scientific Drilling International is on an "at-will" basis.

Job Description Astrotech Space Operations is looking to hire a full-time Facilities/Operations Technician (Electrician) at our Vandenberg Space Force Base, California location. Do you have a background in facilities maintenance or electrical work? Would you like to work for an established spacecraft processing company that values its employees? If so, read on! This facilities maintenance/electrician position earns a competitive wage. We also offer exceptional benefits, including medical, dental, vision, life insurance, short-term disability, supplemental insurance, a 401k plan with company match, flexible spending account (FSA), health savings account (HSA), dependent care reimbursement account (DCRA), generous paid time off (PTO), 9 paid holidays per year, an employee assistance program, and a tuition reimbursement program. If this sound like the right facilities maintenance/electrician opportunity for you, apply today! ABOUT ASTROTECH SPACE OPERATIONS Astrotech Space Operations opened its doors in 1981. Our state-of-the-art payload processing facilities are ideally located to support launches from the Cape Canaveral Space Force Station and Kennedy Space Center in Florida, as well as the Vandenberg Space Force Base in California. Our services encompass hardware integration and testing, fueling, and satellite encapsulation before transport to the pad. This position is critical to our mission support services. At Astrotech, we are here to help our customers make the transition from factory operations to go for launch. Next Stop: Space! Our employees are our most valuable asset, and we seek driven, enthusiastic people who share a dedication to our core values: Do what's Right, Respect Others, and Perform with Excellence. We show our appreciation for all that they do by offering exceptional internal promotion opportunities, annual reviews, and merit increases. A DAY IN THE LIFE OF A FACILITIES/OPERATIONS TECHNICIAN (ELECTRICIAN) Looking for a Facilities Technician (Electrician) with a strong background in industrial 3-phase power systems. Journeyman license preferred, but not required. Key Duties Include: Support power systems configuration and validation in support of mission requirements Conduct maintenance, repair, and modifications of all electrical systems; systems include Switchgear, UPS Backup Systems, Standby Generators, Lightning Protection Systems, and Building Grounding Systems Perform hands-on preventative maintenance, troubleshooting, repair, rebuilding, modification, upgrading, and testing of various facility systems Perform other facility maintenance tasks on HVAC and mechanical systems Perform mission operations including customer support, facility operation, and propellant operations (valet, loading, decontamination) May provide cleanroom services and oversee vendors as required QUALIFICATIONS FOR A FACILITIES/OPERATIONS ELECTRICAL TECHNICIAN Qualified applicants must have a High School Diploma or equivalent and a minimum of 3 years relevant work experience. Must have a strong electrical background with 3-phase industrial power systems experience. Experience with general facility maintenance highly desired. Experience with cleanroom environments is preferred. Position requires a high attention to detail, a results-focused team player than can adapt to change with demonstrated initiative and accountability. Must be a self-starter who can work both independently and as part of a team. Must have a basic knowledge of computer use to include Word, Excel, and Outlook. Must have experience reading and understanding operational procedures and schematics. Position requires working with hazardous chemicals. Must be able to fulfill the physical requirements of the job. Must complete all required training to become a Fully Qualified Propellant Handler. Position requires accessing overhead cranes at 100 feet. Must be able to hold a security clearance, up to Top Secret level, to retain employment, and will be subject to a government security investigation. Must be able to work weekends, overtime, and off-shift hours for customer support if required. Must be able to complete tasks with limited supervision of work. Must be a U.S. Citizen. READY TO JOIN OUR TEAM? We understand your time is valuable, so we have a very quick and easy application process. If you feel that you would be right for this Facilities/Operations Technician (electrican) job, please fill out our initial 3-minute, mobile-friendly application. We look forward to meeting you! Location: 93437 Job Posted by ApplicantPro

Job Description Engineering Technician I We are seeking a hands-on, detail-oriented Engineering Technician to support our engineering team in the development, assembly, and documentation of prototype parts and assemblies. In this role, you will assist in building and testing products, interpreting technical drawings, and using hand tools for precise fabrication. You will also contribute to creating work instructions and supporting cross-functional teams based on workload and priorities. Responsibilities and Duties: Assist engineering in the development and fabrication of prototypes parts and assemblies Follow written work instructions to assemble and document the build of each assembly Interpret and understand technical drawings and documents Utilize basic hand tools to create assemblies Assist the engineers as they create, modify & test products and processes Help create build documentation and work instructions of assemblies Support other functions of the company depending on skills, workload, prioritization Communicate and escalate any process or quality issues Adhere to safety requirements and promote a safety-first culture Desired Skills & Experience: Quick learner, hard-working with skilled hands Must be able to verbally communicate, read, and comprehend written and verbal instructions Ability to use basic hand tools for assembly and fabrication Ability to flex work schedule and support overtime to accommodate project needs Technical hands-on capability with attention to detail. Excellent work ethic and attendance Self-motivated and must be able to work without supervision Ability to use basic hand measurement tools Ability to collaborate and remain calm and professional in a fast-paced environment 1-2 years of experience in a related field Comprehensive Benefits & Perks: Health & Wellness: Choose from three health, dental, and vision plans - including a 100% employer-paid option covering both employees and their families. Paid Time Off: Enjoy 120 hours of PTO, 80 hours accrued plus an additional 40 hours of holiday break pay in addition to Christmas Eve, Christmas Day, and New Year's Day off. Life Insurance: $25,000 employer-paid life insurance policy, with the option to purchase additional coverage for employees and their families. Supplemental Coverage: Access optional benefits such as Critical Illness, Hospital Indemnity, Accident Insurance, and Critical Illness with Skin Cancer coverage. Health Savings Account (HSA): Take advantage of a tax-advantaged HSA to manage medical expenses. Retirement Savings: 401(k) with a company match to support your financial future. Paid Holidays: Enjoy 9 paid holidays throughout the year. Work Environment: A casual dress code, complimentary snacks, and a welcoming company culture. Ideal Location: Work in an area that offers an outstanding quality of life - a perfect place to live, work, and play! Company Overview Empirical Systems Aerospace, Inc (ESAero) is a leader in aerospace engineering, product development, and manufacturing, dedicated to delivering high-quality, innovative, and cost-effective solutions to the industry. We specialize in cutting-edge system design, rapid product development, precision manufacturing, comprehensive testing, and technology demonstrations to support the evolving needs of the aerospace community. Committed to excellence, on-time delivery, and continuous growth, we invest in infrastructure to expand our manufacturing and aftermarket capabilities while maintaining the highest standards of engineering services. At ESAero, we don't just build products, we engineer solutions that propel the aerospace industry forward. **This position is fully on-site at ESAero in San Luis Obispo, CA** ______________________________________________________________________________ ESAero is an equal opportunity employer. E-Verify participation required for employment. Must present proof of authorization to work in the United States. Must be able to pass background check. Hiring Range: $22-32/hour (DOE) Powered by JazzHR EV7GP28NWf

FLSA STATUS: Non-Exempt SALARY RANGE: The anticipated salary range for this role is $22.00/HR to $42.00/HR. This range reflects a good faith estimate based on the targeted level for the role and typical compensation benchmarks across U.S. locations. Actual compensation may vary depending on the selected candidate's qualifications, experience, geographical location, and internal alignment. SUMMARY The Electronics Technician is an integral part of our production team. Under moderate supervision, the Electronics Technician builds assemblies within established timeframes and to document specification, ensuring that all work and components meet rigorous quality standards. The Electronics Technician displays keen attention to detail and supports others in the shop and throughout the company, both technically and as teammates. RESPONSIBILITIES The following job functions are a basic requirement but are not limited to and may be assigned other duties. Manufacturing and assembling cables and wire harnesses Testing and function checking completed assemblies Filling out travelers and documenting components' progress through the shop Regular use of the following tools: soldering iron, wire cutter/stripper/crimper, screwdriver, hand drill/grinder/cutter, drill press, Windows PC, digital multi-meter, etc. Communicate, discuss and listen to challenges with management, teammates, etc. REQUIRED QUALIFICATIONS The following are a non-exhaustive list of qualifications for the position: High School Diploma/GED 1+ years of experience soldering and/or hand crimping Experience in a production setting PREFERRED QUALIFICATIONS Familiarity with analog and digital electronics Familiarity using a microscope Familiar using a digital multimeter EDGE AUTONOMY BENEFITS Matching 401(k) Paid PTO Paid holidays Medical, vision, and dental insurance Group Short-Term & Long-Term Disability HSA and FSA Options Critical Care Plan Accident Care Plan CLEARANCE REQUIREMENTS This position may require access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). To comply with the requirements of the ITAR and/or the EAR, applicants will be asked to provide specific documentation to verify a US person's status under the ITAR and the EAR. WORK ENVIRONMENT AND PHYSICAL REQUIREMENTS The work environment may involve a standard office setting while also incorporating elements of a production area. Employees will use standard office equipment, including computers, and must demonstrate stamina to sit or stand while maintaining attention to detail despite potential interruptions. The role may require occasional activities such as walking, climbing, stooping, crouching, and bending. Vision is necessary for reading printed materials and a computer screen, while hearing and speech are essential for effective communication both in person and over the telephone. Additionally, the position may necessitate travel by air or automobile. Employees may be required to use personal protective equipment, including safety glasses, safety shoes, and shop coats, to ensure safety in the production environment. Employees may be able to lift up to 30 pounds as needed. EDGE AUTONOMY IS AN EQUAL OPPORTUNITY EMPLOYER All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. Edge Autonomy is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact Human Resources. Continued employment remains on an “At-Will” basis.

Specialized Equipment and Systems Management (Oversee the installation, calibration, maintenance, and operation of specialized printing systems) System Troubleshooting and Network Management Facilities Planning and Resource Management Safety and Compliance Awareness Training and User Support Inventory and Asset Management Vendor Coordination and Preventive Maintenance Education and Experience Equivalent to two years of journey-level or skilled experience in the maintenance, repair, and operation of scientific or technical equipment in the specialty area to which assigned such as mechanical, electromechanical, electronics or in the specialized category including construction and fabrication and some precision work or requiring trade or craft skills working with a variety of unique materials. Equivalent to two years of semi-skilled experience maintaining and repairing scientific or technical equipment or related experience in the type of equipment to which assigned as part of instructional support activities may be substituted for one year of the required experience. Equivalent to two years of trade school or technical arts training with specialization in the type of equipment repair to which assigned, completion of an apprenticeship program, or completion of a full military specialization in the required type of equipment maintenance and repair for one year of the required experience. Salary: Anticipated Hiring Range: $25.51 - $28.06 per hour Classification Range: $25.51 - $46.14 per hour Factors in determining the appropriate compensation for a role include experience, skills, knowledge, abilities, education, licensure and certifications, and other business and organizational needs. The Anticipated Hiring Range referenced in the job posting is the budgeted salary or hourly range that the University reasonably expects to pay for this position. The Classification Range may be broader than what the University anticipates paying for this position, based on internal equity, budget, and collective bargaining agreements (when applicable). Cal Poly Known for its Learn by Doing pedagogy, Cal Poly is the flagship of the world-renowned California State University system. Annually recognized as one of the top public universities in the nation, Cal Poly continues to offer an academic curriculum based on learned experience gained through real-world practice. Located in San Luis Obispo, Cal Poly is nestled comfortably among the coastal foothills, minutes from the Pacific Ocean and equidistant to the Bay Area and Los Angeles. Cal Poly offers a best-in-class benefits program, including health, dental and vision insurance, retirement participation in the Public Employees' Retirement System, and educational benefits for eligible employees. See our benefits website for additional information. Equal Opportunity and Excellence in Education and Employment This position is open and available to all regardless of race, sex, color, ethnicity or national origin. Consistent with California law and federal civil rights laws, Cal Poly provides equal opportunity in education and employment without unlawful discrimination or preferential treatment based on race, sex, color, ethnicity, or national origin. Our commitment to equal opportunity means ensuring that every student and employee has access to the resources and support they need to thrive and succeed in a university environment and in their communities. Cal Poly complies with Title VI of the Civil Rights Act of 1964, Title IX of the Education Amendments of 1972, the Americans with Disabilities Act (ADA), Section 504 of the Rehabilitation Act, the California Equity in Higher Education Act, California's Proposition 209 (Art. I, Section 31 of the California Constitution), other applicable state and federal anti-discrimination laws, and CSU's Nondiscrimination Policy. We prohibit discriminatory preferential treatment, segregation based on race or any other protected status, and all forms of discrimination, harassment, and retaliation in all university programs, policies, and practices. Cal Poly is a diverse community of individuals who represent many perspectives, beliefs and identities, committed to fostering an inclusive, respectful, and intellectually vibrant environment. We cultivate a culture of open dialogue, mutual respect, and belonging to support educational excellence and student success. Through academic programs, student organizations and activities, faculty initiatives, and community partnerships, we encourage meaningful engagement with diverse perspectives. As a higher education institution, we are dedicated to advancing knowledge and empowering individuals to reach their full potential by prioritizing inclusive curriculum development, faculty and staff training, student mentorship, and comprehensive support programs. At Cal Poly, excellence is built on merit, talent, diversity, accessibility, and equal opportunity for all. Supplemental Information Satisfactory completion of a background check (including a criminal records check) is required for employment. Cal Poly will make a conditional offer of employment, which may be rescinded if the background check reveals disqualifying information, and/or it is discovered that the candidate knowingly withheld or falsified information. Current employees who are offered positions on campus will be required to undergo a background check for any position where a background check is required by law or that Cal Poly has designated as sensitive. Failure to satisfactorily complete the background check may affect the continued employment of a current CSU employee who was conditionally offered the position. The person holding this position is considered a 'mandated reporter' under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. Cal Poly, San Luis Obispo is not a sponsoring agency for staff or management positions. Applicants for staff and management positions must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time.

Under the general supervision of the Supervisor of Building Trades, the Electronics Technician performs installation, operation, maintenance and repair of electronic equipment, security equipment, intercoms and televisions. Maintains electric shop, keeps records, makes reports, supervises and works with incarcerated person crews. Maintains order and supervises the conduct of persons committed to the California Department of Corrections and Rehabilitation. Prevents escapes and injury by these persons to themselves or others or to property. Maintains security of working areas and work materials; inspects premises and searches incarcerated persons for contraband such as weapons or illegal drugs. May be required to undergo a physical and pulmonary examination for the respirator program. See attached Duty Statement. Individuals who are eligible for a Training and Development assignment may also be considered for this position. Please indicate on application if you are applying for Training and Development. CDCR/CCHCS employees are encouraged to use their existing CDCR email address on their job application. Main communication for this position will be through email. Please ensure you have a valid email address on your application. You will find additional information about the job in the Duty Statement. Minimum Requirements You will find the Minimum Requirements in the Class Specification. * ELECTRONICS TECHNICIAN (CORRECTIONAL FACILITY) Additional Documents * Job Application Package Checklist * Duty Statement Position Details Job Code #: JC-501384 Position #(s): 056-216-6916-002 Working Title: Electronic Technician Classification: ELECTRONICS TECHNICIAN (CORRECTIONAL FACILITY) $5,477.00 - $7,553.00 New to State candidates will be hired into the minimum salary of the classification or minimum of alternate range when applicable. # of Positions: 1 Work Location: San Luis Obispo County Telework: In Office Job Type: Permanent, Full Time Work Shift: 0730-1530 Work Week: Monday - Friday Department Information Vision We enhance public safety and promote successful community reintegration through education, treatment and active participation in rehabilitative and restorative justice programs. Mission To facilitate the successful reintegration of the individuals in our care back to their communities equipped with the tools to be drug-free, healthy, and employable members of society by providing education, treatment, rehabilitative, and restorative justice programs, all in a safe and humane environment. California Department of Corrections and Rehabilitation (CDCR) and California Correctional Health Care Services (CCHCS) are committed to building an inclusive and culturally diverse workplace. We are determined to attract and hire more candidates from diverse communities and empower all employees from a variety of backgrounds, perspectives, and personal experiences. We are proud to foster inclusion and drive collaborative efforts to increase representation at all levels of the Department. CDCR and CCHCS strive to collaborate with the community to enhance public safety and promote successful community reintegration through education, treatment and active participation in rehabilitative and restorative justice programs. Incumbents establish and maintain cooperative working relationships within the department, other governmental agencies, health care partners, and communities. Special Requirements Do not include any confidential information on any documents you submit for a job vacancy, such as your State application, resume, or educational transcripts. Confidential information that should be excluded or removed from these documents includes, but is not limited to, your Social Security Number (SSN), birthdate, student identification number, driver's license number (unless required), basis of eligibility, examination results, LEAP status, marital status, and age. Confidential information on the first page of applications submitted electronically online, such as Easy ID number, SSN, examination related information, and driver's license number will automatically be redacted upon submission. Possession of Minimum Qualifications will be verified prior to interview and/or appointment. If you are meeting Minimum Qualifications with education, you should include your unofficial transcripts/diploma for verification. Official transcripts may be required upon appointment. If it is determined an applicant does not meet the Minimum Qualifications, the candidate will be withheld from the eligibility list, rendering them inactive and ineligible to be hired for the position. Candidates who have been withheld may file an appeal with the State Personnel Board. Applicants who completed their education outside of the US (with foreign degrees/transcripts) must obtain and submit verification of U.S. course/degree equivalency. Foreign education credential evaluation services can be found at NACES | National Association of Credential Evaluation Services. Candidates new to CDCR/CCHCS are required to submit to a background investigation process utilizing Live Scan Fingerprinting, as well as a Tuberculosis test/evaluation prior to appointment, followed by department annual Tuberculosis testing/evaluation thereafter. When submitting supporting documents, PDF file format is preferred. CDCR/CCHCS utilizes E-Verify to confirm candidate's identity and employment authorization. For more information about E-Verify, you may go to ***************** This advertisement may be used for other vacancies that occur during the life of this recruitment. Application Instructions Completed applications and all required documents must be received or postmarked by the Final Filing Date in order to be considered. Dates printed on Mobile Bar Codes, such as the Quick Response (QR) Codes available at the USPS, are not considered Postmark dates for the purpose of determining timely filing of an application. Final Filing Date: 12/28/2025 Who May Apply Individuals who are currently in the classification, eligible for lateral transfer, eligible for reinstatement, have list or LEAP eligibility, are in the process of obtaining list eligibility, or have SROA and/or Surplus eligibility (please attach your letter, if available). SROA and Surplus candidates are given priority; therefore, individuals with other eligibility may be considered in the event no SROA or Surplus candidates apply. Individuals who are eligible for a Training and Development assignment may also be considered for this position(s). Applications will be screened and only the most qualified applicants will be selected to move forward in the selection process. Applicants must meet the Minimum Qualifications stated in the Classification Specification(s). How To Apply Complete Application Packages (including your Examination/Employment Application (STD 678) and applicable or required documents) must be submitted to apply for this Job Posting. Application Packages may be submitted electronically through your CalCareer Account at ********************** When submitting your application in hard copy, a completed copy of the Application Package listing must be included. If you choose to not apply electronically, a hard copy application package may be submitted through an alternative method listed below: Address for Mailing Application Packages You may submit your application and any applicable or required documents to: California Men's Colony N/A Attn: Hiring Unit P.O. Box 8101 San Luis Obispo, CA 93409 Address for Drop-Off Application Packages You may drop off your application and any applicable or required documents at: California Men's Colony N/A Hiring Unit Highway 1 North Trailer M San Luis Obispo, CA 93409 08:00 AM - 04:00 PM Required Application Package Documents The following items are required to be submitted with your application. Applicants who do not submit the required items timely may not be considered for this job: * Current version of the State Examination/Employment Application STD Form 678 (when not applying electronically), or the Electronic State Employment Application through your Applicant Account at ********************** All Experience and Education relating to the Minimum Qualifications listed on the Classification Specification should be included to demonstrate how you meet the Minimum Qualifications for the position. * Resume is optional. It may be included, but is not required. * School Transcripts Applicants requiring reasonable accommodations for the hiring interview process must request the necessary accommodations if scheduled for a hiring interview. The request should be made at the time of contact to schedule the interview. Questions regarding reasonable accommodations may be directed to the EEO contact listed on this job posting. Desirable Qualifications In addition to evaluating each candidate's relative ability, as demonstrated by quality and breadth of experience, the following factors will provide the basis for competitively evaluating each candidate: Good verbal and written communication skills. Willingness to create and promote an equitable and inclusive workplace where diversity is celebrated and valued. Benefits Benefit information can be found on the California Department of Human Resources (CalHR) website, ***************** and the CalPERS website, ******************* Information on benefits afforded by membership in the California Public Employees' Retirement System can be found on the CalHR Salary and Benefits website at ********************************************************** Information on the benefits and protections provided to public employees by the State Civil Service Act can be found on the CalHR website at ******************************************************************************************** Additional benefit information can be found on the CalHR California State Civil Service Employee Benefits Summary website at ********************************************************************************************* This webpage is intended to provide general information. Benefit eligibility may be based on job classification, bargaining unit, time base and length of appointment. Contact Information The Human Resources Contact is available to answer questions regarding the application process. The Hiring Unit Contact is available to answer questions regarding the position. Human Resources Contact: Emma Andreasen ************** ************************** Hiring Unit Contact: CMC Hiring Unit ************** m_************************ Please direct requests for Reasonable Accommodations to the interview scheduler at the time the interview is being scheduled. You may direct any additional questions regarding Reasonable Accommodations or Equal Employment Opportunity for this position(s) to the Department's EEO Office. EEO Contact: Steve Willingham, Captain, AI ************** **************************** California Relay Service: ************** (TTY), ************** (Voice) TTY is a Telecommunications Device for the Deaf, and is reachable only from phones equipped with a TTY Device. Eligibility Information To obtain list eligibility for Electronic Technician, CF, before applying for the position, you must first take and pass the examination here. Equal Opportunity Employer The State of California is an equal opportunity employer to all, regardless of age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding and related medical conditions), and sexual orientation. It is an objective of the State of California to achieve a drug-free work place. Any applicant for state employment will be expected to behave in accordance with this objective because the use of illegal drugs is inconsistent with the law of the State, the rules governing Civil Service, and the special trust placed in public servants.

Job DescriptionDescription: ? At IMDEX, we create technology that efficiently and sustainably unlocks the Earth's value. Our technologies and products allow smarter and safer decisions for people, assets and the earth. Through innovation and curiosity, we continue to find new ways to improve accuracy and efficiency in mining in a more sustainable way. For further information visit ************** The opportunity? This position allows employees to apply a range of technical service skills and knowledge of processes to manufacture, service and repair products and tools to required quality. The mining tools and products are repaired at the facility in San Luis Obispo, CA. This is an in office position and will not be performed remotely. Additionally, to champion continuous improvement initiatives and supports the new product introduction (NPI) process To be successful? Can work autonomously to apply a range of technical service skills and processes to repair IMDEX products and tools used in the mining field Assis and communicate with other departments on product availability Support in the development and/ or updates to any product manuals and documentation Ensure all equipment is calibrated Experience in high efficiency assembly of products including packing products or kits as needed. Ensures all manufacturing, service, and/ or repairs is carried out within the defined turnaround KPI's Can support New Product Induction (NPI) processes Follows all work instructions, information, and training to ensure manufacturing, services and/or repair are performed to quality and compliance requirements as per procedures, SWIs and specifications. Correctly records information relating to production processes, including timesheets and job length. All work completed to ISO9001 standards and per company policies and requirements. 6S must always be considered in the handling, movement and storage of product and inventory Requirements: To thrive in this role Essential 2+ year industry experience in a similar role Ability to clearly write accurate and routine descriptions of work performed. Basic computer literacy. Desirable Prior experience using ERP (enterprise resourcing planning) software At IMDEX - we do things differently IMDEX is a unique blend of technology and mining. Our people have contrasting and complementary skills which drive innovation, adaptability, and holistic problem solving. We offer our global talent: A culture of care - we care and look out for our people by fostering an inclusive and respectful working environment. Game changing work - we give you autonomy and provide flexibility that harnesses your strengths and individuality. Opportunities to grow - we want you to grow and expand your thinking and provide clear career pathways so you can see where you can go next. Empowerment by purpose - to be close to the solution and change the face of mining forever. Ability to build strong connections within a global business - you will have the opportunity to collaborate with people from all over the world. IMDEX is an Equal Opportunity Employer committed to employing a diverse workforce and providing a workplace of respect and inclusiveness. We place great emphasis on ensuring our company is a safe, high performing and welcoming workplace. The information submitted during the recruitment process will be stored and processed as per IMDEX Limited Privacy Policy found at ************************************ Agency calls and candidates will not be considered. Shortlisting starts immediately.

Rantec is hiring an Electronic Troubleshooting Technician in our Production Test Department. Come join our team! Based in Los Osos, California, located along California's scenic Central Pacific coastline, Rantec offers many outstanding benefits, the following are a few: Competitive wages Great benefits - i.e. Medical (PPO, HSA), Dental, Vision, Flexible Spending Accounts Vacation - 2 weeks to start, Holidays, Paid Sick Leave Tuition Assistance 401K with matching up to 6%, Peer-to-Peer recognition and Years of Service Awards. We have every other Friday off as we are on the 9/80 schedule Free catered lunch on the Friday/payday that we work. Voluntary overtime hours available. Rantec is located in Los Osos, California is an upper-tier designer and manufacturer of power supplies for the military and aerospace markets. We are an engineering-based company, with expertise in all aspects of power supply design, manufacturing and test. Position Summary The Production Test team at Rantec is tasked with keeping product flowing from Manufacturing to the customer while catching items that do not meet customer specifications or Rantec standards for quality. It is when product fails a test or fails in operation that the Test Technician steps to the front. As a Test Technician, you will use your extensive skills in power conversion electronics and test processes to determine the cause of the failure and identify any consequential failures that must be corrected. Rantec employs extensive automated test systems, but not all product can use these, and it takes sophisticated skills to complete these tests accurately and consistently. The Test Technician will perform manual or complex tests on low volume high value product in an efficient manner. You will have the opportunity to expand your skill set through formal training and through hands-on experience with other Test Technicians and Electrical Engineers. Essential Duties and Responsibilities, including but, are not limited to the following: Troubleshoot failed power supplies and components Review test reports of failed power supplies Use a combination of automated and manual test processes to isolate the problem to a board or module Identify the failure whether a bad or incorrect component Identify any likely secondary damage Document, report, and track failure modes Report any trends noticed to the Test and Manufacturing Engineering teams Conduct high-touch or complex test processes Conduct manual tests on legacy or low volume product where there are no automated tests Work with Test Engineering on first time run-throughs for new products, test fixtures, or processes Provide constructive feedback to Test Engineering on new processes and test documentation Conduct incoming material tests for non-standard or complex parts Assist the Test Supervisor and Director of Test in scheduling resources Provide additional Production Test coverage in times of high demand Report to Test Engineering any test systems that are not performing correctly or are providing suspicious results Work with other Test Technicians to ensure the Production Test and ESS areas remain clean and organized Work with Account Management to organize and prioritize testing of customer returned material Provide feedback to Engineering and Test Engineering on the testability of new product designs Assist the Test Supervisor in training new Test Technicians Ability to work flexible hours and/or different shifts, if needed. Perform other duties as assigned Education and Experience Associates Degree or equivalent in Electronics Technology. 3-5 years experience with electronic troubleshooting (board and component level). Experience using basic and advanced electronic measurement tools and equipment. Ability to read and understand mechanical drawings and electrical schematics. Experience with the MS Office suite (Excel, Word). Ability to read and complete documented processes independently Soldering (IPC J-STD-001 certification) preferred. Electronics inspection (IPC A-610 certification) preferred. Salary: $32.00 Hourly Click on this link to read Rantec's Privacy Policy Rantec is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or status as a protected veteran. Rantec will consider requests for reasonable accommodation from applicants with disabilities or sincerely held religious beliefs. If you require accommodation during the application process, please contact [email protected].

Job Summary and Responsibilities Under direction of the Materials Management Manager/Supervisor disinfects medical equipment and procedure carts per department procedure. Receives, stores, issues and delivers supplies and equipment. Prepares equipment and supplies for shipping, as needed. Performs daily counts of par-level locations via hand-held technology, approved supply storage system or materials management information system. Performs data entry of stock items issued from inventory. Maintains hospital inventory and materials management work areas in a clean and orderly manner. Participants in inventory/cycle counting process per department procedure. Job Requirements Two years or more experience working with large ERP systems. Six to twelve months of inventory management experience in a medical setting. Meets minimum competencies of the job classification within the orientation period. Competent in Microsoft Word, Outlook and basic computer operations. Ability to communicate verbally and in written form in English. Good numerical skills a must. Sound customer service techniques and practices, ability to communicate in a professional and articulate manner with internal and external partners at all levels both verbal and written, remain calm and courteous while handling problems, comfortable as a team member and informational leader, knowledge of Materials Management. Current and valid California Driver's License.Where You'll Work Marian Regional Medical Center, a 191-bed facility located in Santa Maria, California, is recognized as one of the Top 250 Hospitals in the Nation by Healthgrades and was awarded Best Maternity Care by Newsweek. It ranks among 10% in the nation for safety core measures in cardiac services and has the only comprehensive cancer treatment and resource program from Los Angeles to San Francisco. Marian's beautiful mission-style facility houses the latest technology to support excellent physicians and caregivers who deliver compassionate care each and every day. Marian Regional Medical Center is a part of Dignity Health's Southwest Division and is a member of CommonSpirit Health, the largest not-for-profit health care system in the nation, boasting an integrated network of top quality hospitals, with physicians from the most prestigious medical schools, and comprehensive outpatient services - all recognized for quality, safety, and service. Marian's offers Santa Maria Valley residents access to the most advanced technologies, an expanded and enhanced Emergency Department, Critical Care Unit, neonatal intensive care unit, and an array of women's services. One Community. One Mission. One California

Responsible for providing assistance to the GI physicians in diagnostic and interventional procedures in the GI lab by providing safe and efficient patient care in collaboration with a multidisciplinary team to achieve quality patient outcomes. Age(s) of Patients Served: Birth and above Providence caregivers are not simply valued - they're invaluable. Join our team at Providence Facey Medical Foundation and thrive in our culture of patient-focused, whole-person care built on understanding, commitment, and mutual respect. Your voice matters here, because we know that to inspire and retain the best people, we must empower them. Required Qualifications: + Graduate of an accredited program for medical assistants, nursing assistants or surgical technicians or equivalent combination of coursework, experience or training. + Within 30 days of hire: National Provider BLS - American Heart Association + 3 years of GI / Endo experience Preferred Qualifications: + Upon hire: Society of Gastroenterology Nurses Association (SGNA) Certification + 5 years of Health care experience in a GI lab. Why Join Providence? Our best-in-class benefits are uniquely designed to support you and your family in staying well, growing professionally, and achieving financial security. We take care of you, so you can focus on delivering our Mission of caring for everyone, especially the most vulnerable in our communities. About Providence At Providence, our strength lies in Our Promise of "Know me, care for me, ease my way." Working at our family of organizations means that regardless of your role, we'll walk alongside you in your career, supporting you so you can support others. We provide best-in-class benefits and we foster an inclusive workplace where diversity is valued, and everyone is essential, heard and respected. Together, our 120,000 caregivers (all employees) serve in over 50 hospitals, over 1,000 clinics and a full range of health and social services across Alaska, California, Montana, New Mexico, Oregon, Texas and Washington. As a comprehensive health care organization, we are serving more people, advancing best practices and continuing our more than 100-year tradition of serving the poor and vulnerable. Posted are the minimum and the maximum wage rates on the wage range for this position. The successful candidate's placement on the wage range for this position will be determined based upon relevant job experience and other applicable factors. These amounts are the base pay range; additional compensation may be available for this role, such as shift differentials, standby/on-call, overtime, premiums, extra shift incentives, or bonus opportunities. Providence offers a comprehensive benefits package including a retirement 401(k) Savings Plan with employer matching, health care benefits (medical, dental, vision), life insurance, disability insurance, time off benefits (paid parental leave, vacations, holidays, health issues), voluntary benefits, well-being resources and much more. Learn more at providence.jobs/benefits. Applicants in the Unincorporated County of Los Angeles: Qualified applications with arrest or conviction records will be considered for employment in accordance with the Unincorporated Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. About the Team The Sisters of Providence and Sisters of St. Joseph of Orange have deep roots in California, bringing health care and education to communities from the redwood forests to the beach shores of Orange county - and everywhere in between. In Southern California, Providence provides care throughout Los Angeles County, Orange County, High Desert and beyond. Our award-winning and comprehensive medical centers are known for outstanding programs in cancer, cardiology, neurosciences, orthopedics, women's services, emergency and trauma care, pediatrics and neonatal intensive care. Our not-for-profit network provides a full spectrum of care with leading-edge diagnostics and treatment, outpatient health centers, physician groups and clinics, numerous outreach programs, and hospice and home care, and even our own Providence High School. Providence is proud to be an Equal Opportunity Employer. We are committed to the principle that every workforce member has the right to work in surroundings that are free from all forms of unlawful discrimination and harassment on the basis of race, color, gender, disability, veteran, military status, religion, age, creed, national origin, sexual identity or expression, sexual orientation, marital status, genetic information, or any other basis prohibited by local, state, or federal law. We believe diversity makes us stronger, so we are dedicated to shaping an inclusive workforce, learning from each other, and creating equal opportunities for advancement. Requsition ID: 403269 Company: Providence Jobs Job Category: Diagnostic Imaging Job Function: Clinical Care Job Schedule: Full time Job Shift: Day Career Track: Clinical Support Department: 7011 ENDOSCOPY CA PFMF FACEY ENDOSCOPY CENTER Address: CA Mission Hills 11333 N Sepulveda Blvd Work Location: Facey-Mission Hills Workplace Type: On-site Pay Range: $27.92 - $42.73 The amounts listed are the base pay range; additional compensation may be available for this role, such as shift differentials, standby/on-call, overtime, premiums, extra shift incentives, or bonus opportunities.

Job Title: Electronic Technician Reports To: Plant Engineer Department: Plant Maintenance Duties and Responsibilities: Under the direction of the Plant Engineer or their designee, fulfill all requirements and perform all tasks, assignments, and duties of a Maintenance Craftsman Electrical Worker, Level I (Industrial Electrician). Proficiently troubleshoot digital and analog electrical and electronic machinery, components, and control systems, including electrical, electronic, software, and pneumatic control systems. Utilize multi-meters, oscilloscopes, megohmmeters, calibrators, thermal imagers, and other test equipment to troubleshoot and monitor machinery. Understand and troubleshoot electronic machine controls using PLCs, PID loops, AC/DC motor drives, HMIs, electronic sensors, communication systems, basic networking, SCADA systems, and camera equipment. Use computers for web searches, reading PLC programs, setting up control equipment, monitoring processes, and general machine troubleshooting. Proficiency in Microsoft Office programs is highly desired. Possess working knowledge of process instrumentation and feedback devices such as thermocouples, pressure and flow sensors, level sensors, speed sensors, rotating encoders, and related equipment. Complete required tests, calibrations, adjustments, and associated reports on process equipment as needed. Job Requirements: Meet all scholastic and experiential requirements of a Maintenance Craftsman Electrical Level I. Have a minimum 2-year degree in electronics training or equivalent education through relevant college-level courses, military training, or other equivalent training. At Delectus, we pursue excellence in all we do. Our core values of character, capability, and responsibility shape our approach, ensuring precise matches between talent and opportunity. With a focus on enduring partnerships, we tailor our services to meet the distinctive needs of each client and candidate. Our seasoned professionals are dedicated to supporting you throughout the hiring process. Thank you for considering Delectus for your career journey. Join us in our commitment to diversity, inclusion, and delivering exceptional results in recruitment

Job Details Experienced Paso Robles - Paso Robles, CA Undisclosed N/A Full Time Undisclosed $30.00 - $45.00 Hourly Undisclosed Undisclosed UndisclosedDescription The Senior Controls Technician requires expertise in industrial electrical systems, process instrumentation, and automation controls to support brewery operations. The ideal candidate will have hands-on experience working with 480V 3-phase systems, 120V circuits, PLCs, HMIs, and a strong understanding of process control systems, instrumentation calibration, and troubleshooting. In this role, you will be the primary resource responsible for maintenance, troubleshooting, and repair of electrical and control systems across the brewery. You will also play a critical role in the design review, installation, commissioning, and startup of new equipment, working closely with both the maintenance team and engineering department to ensure successful project execution and seamless equipment integration. ESSENTIAL JOB DUTIES AND RESPONSIBILITIES: Specifically, the responsibilities of the position include, but are not limited to, the following activities. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions: Install, maintain, troubleshoot, and repair 480V 3-phase power systems, 120V circuits, and 24V control systems. Read, interpret, and apply single-line diagrams, wiring schematics, P&IDs, and technical drawings to perform work safely and efficiently. Diagnose and resolve issues with equipment controls, including 24VDC systems, 4-20mA instrumentation loops, VFDs, sensors, and process control devices. Perform routine preventive maintenance, calibration, and performance testing on instrumentation and control systems. Support PLC programming, HMI configuration, and troubleshooting, and assist with control panel design, modifications, and documentation updates. Update wiring diagrams, schematics, and panel drawings as needed to reflect changes, repairs, or upgrades, ensuring all documentation is accurate and current. Ensure all equipment and panels are properly labeled to support clear identification and safe maintenance practices. Ensure compliance with electrical codes, safety regulations, and company policies during all work activities. Work closely with the engineering, maintenance, and production teams to minimize unplanned downtime, improve system reliability, and optimize equipment performance. Maintain accurate records and manage inventory of electrical, instrumentation, and control system parts and components. Coordinate and oversee work performed by outside contractors, ensuring adherence to site safety standards and proper documentation of all work. Assist with equipment installations, commissioning, and start-up, ensuring proper integration into existing control and power systems. Take ownership of projects and assignments as directed, proactively identifying opportunities for process improvement and reliability enhancement. Other duties as assigned. Qualifications REQUIRED QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation Proven experience as an industrial electrician or controls technician, preferably in a manufacturing, food & beverage, or brewery environment. Proficiency with 480V 3-phase systems, 120V circuitry, and 24V control systems, including power distribution and motor controls. Hands-on knowledge of process instrumentation, including 4-20mA loops, temperature, pressure, and flow sensors. Familiarity with PLCs, HMIs, and control panel components, with the ability to assist with basic programming, configuration, and system modifications. Ability to read, interpret, and update single-line diagrams, wiring schematics, P&IDs, and other technical documentation. Strong troubleshooting and analytical skills, with the ability to quickly identify and resolve electrical, instrumentation, and control system issues. Solid understanding of electrical codes, NFPA 70E, and industry safety practices, including Lockout/Tagout (LOTO) and safe electrical work procedures. Ability to work from and interpret plans, drawings, prints, schematics, operating manuals, and repair manuals, ensuring proper installation and repairs. Experience with updating documentation, labeling panels and equipment, and maintaining accurate records of work performed. Highly motivated, self-directed, and able to work independently with minimal supervision while also being a collaborative team player. High attention to detail, accuracy, and precision in all work. Excellent communication skills, with the ability to effectively collaborate across maintenance, engineering, and production teams. Tion may be made to enable individuals with disabilities to perform the essential functions. WHAT FIRESTONE WALKER OFFERS: An excellent benefits package including: Competitive salary commensurate with experience and knowledge Base Salary: $30-45/hour 100% paid premiums for employees including medical, dental, vision, & life insurance Accrued PTO (rate of 13 days per year) Paid Sick Leave (48 hours max usage per year) 401(k) retirement plan including company paid profit sharing & 4% safe-harbor matching 10 paid holidays per year 50% off employee discount on food, beer, and merchandise Periodic beer giveaways for employees 21+ Inclusive company culture that values and develops our employees FSA plan to save tax money on out of pocket medical and dependent care expenses Please submit your resume with your work experience when applying. Firestone Walker is an Equal Opportunity Employer.

Company DescriptionJobs for Humanity is partnering with DISH to build an inclusive and just employment ecosystem. Therefore, we prioritize individuals coming from the following communities: Refugee, Neurodivergent, Single Parent, Blind or Low Vision, Deaf or Hard of Hearing, Black, Hispanic, Asian, Military Veterans, the Elderly, the LGBTQ, and Justice Impacted individuals. This position is open to candidates who reside in and have the legal right to work in the country where the job is located. Company Name: DISH Job DescriptionDepartment Summary Our Technicians deliver TV and Smart Home solutions to millions of customers. As a technician, we will train you to lead the charge for a world class customer experience, educating and connecting more Americans with every home you visit. You're the backbone of our organization and ensure an excellent customer experience. Our dedication to customer experience is paying off: in 2023, DISH earned the J.D. Power award for being #1 in Overall Customer Satisfaction for the sixth year in a row. Job Duties and Responsibilities What's in it for you? Guaranteed promotion after 6 months with a $1.00 per hour pay increase! Performance Incentives with the potential for up to $6,400 in your first year and $9,100 each following year! Paid training, paid time off & paid holidays 4-day work week with opportunities to work overtime Medical, Dental, Vision and Life Insurance packages and Health Savings Account Free DISH TV programming at a value of $114.99/month at your home, plus deeply discounted Sling TV and Boost Infinite phone plans 401(K) with company match & Employee stock purchasing program (ESPP) Tuition Reimbursement DISH-supplied van, tools, and uniforms Our greatest benefit is opportunity with over 400 of our current technician leadership starting as a technician. If you have grit and tenacity, you will grow quickly at DISH! Performance based promotions include an automatic 5% pay increase at level 2 and 10% at levels 3 and 4. What will you be doing? As a Field Technician, you will be representing DISH in customers' homes daily. We build our value by simplifying lives and using the DISH install to consult homeowners on their infinite smart home possibilities. Skills, Experience and Requirements All technicians must have: Aptitude to build rapport quickly. We want you to have a great time servicing our clients Ability to work at heights, including ladders up to 40 feet, and in all weather conditions Ability to lift over 70 lbs A valid driver's license in the state you are seeking employment with a driving record that meets DISH's safety standard Travel may be required Salary Range Compensation: $20.75/Hour Compensation and Benefits From versatile health perks to new career opportunities, check out our benefits on our careers website. Employment is contingent on successful completion of a pre-employment screen, to include a drug test and an acceptable driving record. Compensation listed may reflect a combination of hourly pay rate and location pay differential.

Scientific Drilling is looking for a Electronic Technician to join our Applied Technologies Center in Paso Robles, CA. Scientific Drilling is an independent directional drilling and wellbore navigation, surveying and logging service company serving customers in oil & gas and sustainable geothermal worldwide. We are motivated by crafting innovative solutions to technically challenging problems that support and advance our energy future. Nestled between San Francisco and Los Angeles, the California Central Coast is described as the happiest place on earth. The area features 200+ wineries, fresh air, miles of beautiful beaches, and small-town appeal. Our Electronic Technician will work in our Manufactuing team and is expected to perform the essential duties listed below. Candidates must have authorization to work in the United States. Essential Duties and Responsibilities: Tests electronic assemblies using a written procedure. Uses multimeters and oscilloscopes to measure voltages and waveforms. Troubleshoots test failures to board level. Writes failure reports. Works with Test Technicians to solve failures. Responsible for the electronic equipment and tools in his or her work area. Manages work station and practices good housekeeping techniques. May be required to work overtime. Pursues every job with drive and determination. Uses logic to solve problems with effective solutions. Performs other relevant duties as required. Job Knowledge, Skills, and Abilities: Must be able to identify electronic components on schematics and circuit boards. Must understand common electronic concepts, such as current, voltage, resistance, and Ohm's Law. Must be able to read and understand electronic schematics. The ability to use correct soldering techniques is a plus. Ability to present oneself with professional appearance and behavior in accordance with ATC dress code and SDI Code of Conduct. Ability to meet all SDI/ATC safety requirements. Ability to understand and follow instructions. Ability to read, communicate, and understand the English language. Computer proficiency. Ability to communicate effectively with managers and peers, both written and verbally. Adhere to established company procedures and policies, work schedule, attendance standards and is punctual to work and meetings. Contribute to team effort by accomplishing related results, as needed. Possess the ability to be interactive with management staff and co-workers. The ability to use a word processor and a spreadsheet is preferred. Education, Experience, Certification, and Training: Requires a high school diploma or its equivalent. An Associates Degree in Electronics or equivalent experience required. 0-2 years experience in the field of electronics preferred. Location, Physical Requirements, and PPE: Manufacturing: Ability to walk, stand, sit, kneel, push, stoop, reach above the shoulder, grasp, pull, bend repeatedly, identify colors, hear with aid, see , write, count, read, speak, analyze, alphabetize, lift and carry 25 lbs. and under, perceive depth, and operate motor equipment. Conditions include working inside. Working around moving objects, machines with moving parts. Working around radiant and electrical energy. Work with heated soldering iron and flux. Working closely with others, working alone, working extended or irregular hours. Working environment may include but not limited to, intermittent noise, fumes, smoke, grease, dust, oils and solvents. Equipment (machines, tools, devices) used in performing the essential job function include but not limited to computer and related equipment, calculator, special instrumentation, hand tools, power tools, air tools, microscope and telephone. Ability to wear proper personal protective equipment (PPE), including but not limited to, safety glasses, reinforced toed shoes, gloves, and ear plugs or muffs. This describes the general duties and responsibilities, and physical requirements associated with the position; it is not an exhaustive list of all duties, responsibilities, or skills required for the position. The general duties and responsibilities and physical requirements associated with the position are subject to modification in order to reasonably accommodate individuals with disabilities. Some physical requirements may exclude individuals who pose a threat or risk to the health or safety to themselves or others. This job description neither states nor implies that the listed general duties and responsibilities and physical requirements associated with the position are the only tasks expected of an employee. An employee is also required to follow any other job-related instructions and perform any other job-related tasks requested by their supervisor and not in violation of any applicable laws, regulations, or rules. Requirements are representative of minimum levels of knowledge, skills, and abilities. To perform this job successfully, an employee must possess the abilities and aptitudes to perform each duty, responsibility, and physical requirement proficiently. Employment at Scientific Drilling International is on an "at-will" basis.