Technician jobs in South Dakota - 878 jobs

****Willing to train a smart, astute mechanically inclined individual*** We're seeking a skilled Rotary Screw Air Compressor Service Technician to join our service team. In this role, you will install, maintain, troubleshoot, and repair rotary screw air compressors across a range of industrial environments. The position also includes servicing and repairing compressed air dryers (refrigerated and desiccant). Industrial refrigeration experience is a plus and will be highly valued. Key Responsibilities Preventive Maintenance (PM): Perform scheduled PMs on rotary screw air compressors, including oil and filter changes, belt inspections, and lubrication. Diagnostics & Repair: Troubleshoot mechanical, electrical, and pneumatic issues; replace/repair motors, drives, regulators, valves, separators, coolers, and control components. Compressed Air Dryers: Service and repair refrigerated and desiccant dryers (heatless, heated, and blower purge), including dew point verification, drain systems, and desiccant media changes. System Commissioning: Assist with start-up, commissioning, and performance verification of new compressor and dryer installations. Controls & Electrical: Work with PLCs, VFDs, and microprocessor-based controls; read schematics and electrical diagrams to isolate faults. Oil Analysis & Documentation: Perform oil sampling and maintain service records per warranty and OEM standards. Customer Support: Provide on-site technical guidance, explain findings and corrective actions, and recommend system improvements. Safety & Compliance: Follow all safety procedures, lockout/tagout, and environmental regulations (fluids handling, refrigerants). On-Call/Travel: Participate in rotating on-call schedule and travel to customer sites within the region. Qualifications Preferred: Strong mechanical and electrical aptitude. 3+ years of experience servicing rotary screw air compressors or closely related industrial equipment. Working knowledge of compressed air systems, dryers, and condensate management. Proficiency with electrical troubleshooting (120/240/480V), controls, and VFDs. Ability to read mechanical and electrical schematics and use diagnostic tools (multimeter, megger, thermal camera). Valid driver's license and clean driving record. Excellent communication and customer service skills. Experience with refrigerated and desiccant air dryers (dew point monitoring, refrigerant circuits, purge systems). Industrial refrigeration experience (refrigeration cycle, compressors, condensers, evaporators, TXVs/EEVs, refrigerant recovery). EPA Section 608 certification (Type I/II/III or Universal). OEM training/certifications (e.g., Atlas Copco, Ingersoll Rand, Sullair, Kaeser, Gardner Denver, Quincy). Basic PLC programming/parameter adjustment and networked control systems experience. Physical & Work Requirements Ability to lift up to 50 lbs, work in tight spaces, climb ladders, and stand for extended periods. Comfortable working in industrial environments (noise, heat/cold, dust). Willingness to work occasional overtime, weekends, and on-call rotations. Tools & Technology Multimeter/megger, vibration analyzer, oil sampling kits, refrigerant gauges/recovery equipment. Laptop/tablet for service reporting, OEM diagnostic software, and CMMS. Familiarity with Microsoft 365 (Outlook, Excel, Teams) for scheduling and documentation. Education High school diploma or GED required. Technical degree/certificate in Industrial Maintenance, HVAC/R, Mechatronics, or related field preferred. Benefits Competitive compensation with overtime opportunities. Medical, dental, vision, and life insurance. 401(k) with company match. Paid time off and holidays. Company vehicle, fuel card, tools allowance, and OEM training.

Job Type: Regular PermanentThe Maintenance Technician II performs routine and break down maintenance on processing and packaging equipment, and is responsible for keeping the plant running and in compliance with all rules and regulations by using safe methods of equipment repair/upkeep. The Maintenance Technician II performs repairs as needed by the department, troubleshoots processes, manages and administers the preventive maintenance program, and assists with machine set ups and rebuilds as needed. Invest in you, Join Agropur. We dairy you! Text key word "Agropur" to and then text (Job req #) to apply today! How Agropur invests in YOU: Starting at $27.78/hr Schedule 5-2-2-5 rotation day and night, 6am to 6pm and 6pm to 6am. 2 pay increases within first year up to $1.00 Double time on Sunday + $1.50 night differential pay Competitive and comprehensive compensation and benefits package focusing on your physical, financial, and emotional health to include the following perks as well as the standard benefit offerings: Medical, Dental, Vision, Life, Short and Long-term Disability Insurance 401(k) with up to 7% company contributions 3 Weeks PTO Paid holidays and 2 floating holidays Paid parental leave Advancement Opportunities Healthy work/life balance Essential Duties and Responsibilities: Efficiently perform regular and preventative maintenance related to the plant, equipment, and grounds in compliance with standard operating procedures, good manufacturing practices, and safety policies as enforced by OSHA. Provide emergency/unscheduled repairs of mechanical, electrical, pneumatic and hydraulic equipment during the production process as needed. Prepare and set up machinery for scheduled production runs. Effectively perform and assist in repair or updating and installation of equipment. Perform troubleshooting of equipment, including both electrical and mechanical systems. Complete and update work orders using in-house systems. Complete and maintain routine and preventive records and logs. Works closely with production to minimize downtime while maintaining quality. Perform buildings and grounds maintenance/up-keep as needed. Maintain a working knowledge of all plant area processes. Accurately read and interpret equipment manuals and work orders. Other Duties and Responsibilities: Perform work accurately, reliably, thoroughly, timely, and within safety guidelines. Understand and adhere to Good Manufacturing Practices. Safety Protocol Stop any observed unsafe acts and obey facility safety rules and procedures. Correct or report any observed safety hazards. Support safety policies and programs. This list of duties and responsibilities is not all-inclusive and may be expanded to include other duties and responsibilities, as management may deem necessary from time to time. Qualifications: Education Required: High School Diploma or equivalent required. Technical school coursework/Degree in boiler (not LSC), welding, electrical, HVAC maintenance preferred. Experience Required: Minimum two (2) years of maintenance/repair experience in a manufacturing environment required. Mechanical and electrical aptitude required. Certification/Licensure Required: None Skills Required: Communicate effectively both verbally and in writing with managers and colleagues. Decisions administered soundly and consistently with policies and in compliance with appropriate laws and regulations. Accurately scopes out length and difficult of tasks and projects, sets objectives and goals, breaks down work into the process steps, develops schedules and assignments, anticipates and adjusts for problems or roadblocks, measures performance against goals, evaluates results. Able to follow written, verbal and/or diagrammatic instructions; solve practical problems; interpret verbal and written instructions; logical thinking to solve problems including abstract and concrete variables; address practical problems; comprehend most complex concepts. Able to exchange basic informational data (fill out forms/checklists, copy data from one record to another, etc.); interview to gather information; advise others on alternatives/options; coach and counsel others; read, understand and explain technical data. Ability to solve problems by adapting knowledge and experience. Ability to work with minimum supervision, adapt to a changing environment quickly, and think independently. Demonstrate functional and technical knowledge, ability to learn new skills quickly, and achieve a high level of accomplishment. Demonstrate attention to detail and accuracy in work. Basic math plus fractions, decimals and percentages, as well as algebraic calculations. Basic computer operational skills; able to input and retrieve computerized information. Strong interpersonal skills and ability to work effectively at all levels in a collaborative team environment. Results driven, bottom-line oriented, strive to exceed goals, and motivate self and others to achieve positive outcomes. Exhibit a professional manner in dealing with others and work to maintain constructive working relationships. AA/EEO - Minority/Female/Disability/Veteran/Sexual Orientation/Gender Identity Agropur welcomes people from all backgrounds and origins. We are proud to be an employer with a diverse community and are committed to providing a respectful and inclusive experience for all employees and applicants. We will work with candidates who request accommodation. Please note that an adequate knowledge of French is required for positions in Quebec. In this text, the use of the masculine gender to designate persons is intended only to lighten the text.

BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION The Maintenance Technician is responsible for performing highly diversified duties to install, troubleshoot, repair, and maintain production and facility equipment according to safety processes and predictive and productive maintenance systems to support the achievement of the site's business goals and objectives. Key Deliverables • Respond quickly in the event of an emergency repair. • Fix potential safety hazards to avoid injuries. • Repair broken or leaking plumbing. • Perform maintenance of electrical systems. • Maintain the building HVAC equipment in order to keep climate control in the facility functioning properly. Key Activities & Responsibilities • Install and maintain production machines and plant/facility equipment. • Provide emergency/unscheduled repairs of production equipment during production. • Conduct scheduled maintenance repairs of production equipment during machine service. • Perform simple machinist duties and responsibilities. • Utilize mechanic skills including, but not limited to mechanical, electrical, pneumatic, and hydraulic troubleshooting and repair of production machines. • Execute regular preventive maintenance on machines, equipment, and plant facilities. • Read and interpret equipment manuals and work orders to complete required maintenance and service. • Diagnose problems, replace or repair parts, test, and adjust as needed. • Perform a variety of plumbing, maintenance, and carpentry functions. • Operate a variety of hand and power tools, electric meters, and material handling equipment in performing duties. • Detect faulty operations and defective material and report those and any unusual situations to proper supervision. • Achieve quality results and maintain clean and orderly work areas. • Follow company policies, procedures, and safety rules at all times. Supervisor and Leadership Expectations: None OUR CULTURE & VALUES Employees that become part of Astec embody the values below throughout their work: • Continuous devotion to meeting the needs of our customers • Honesty and integrity in all aspects of business • Respect for all individuals • Preserving entrepreneurial spirit and innovation • Safety, quality, and productivity as means to ensure success WORK ENVIRONMENT Manufacturing Environment The shop manufacturing environment includes exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions, and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, and very warm and chilly temperatures. The noise level in the shop can be very loud at times, consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person's veteran status, or any other characteristic protected by law or executive order.

Interested in driving innovation in agriculture? Company Bio The world of agriculture and the feed industry is rapidly evolving. CBS Bio Platforms is at the leading-edge - an innovation-focused company that researches, develops, and manufactures a wide range of bio-based products used in feed, food, and industrial applications. CBS is a pioneer and leader in enzymes and other bio-based feed technology options, leveraging 40 years of research and development. The company was established in 1984 and is headquartered in Calgary, Alberta, Canada, with manufacturing and warehouse locations in Canada as our new distribution hub and research facility in Volga, South Dakota, serving customers internationally. If you are looking for an innovative work environment where you work with great people and truly make a difference, we would love to hear from you! The Opportunity As part of the production team, reporting to the Production Manager, you'll play a key role in keeping our operations running smoothly. You'll work independently to deliver high-quality results on schedule, ensuring every product meets our safety, quality, and customer standards. Your Impact Ensure outputs meet production schedules, safety and quality standards, as well as customer needs Operate, and monitor equipment, detect malfunctions or out-of-tolerance machining and adjust machine, controls, or control media within capabilities as required to ensure quality of production Ensure proper use of required personal protective equipment at all times Perform daily maintenance and safety checks on all equipment and tools Record, mark and report any defective products Maintain a clean working area free from dirt and debris throughout and at end of day Troubleshoot or resolve product or equipment problems and recommend measures to improve productivity, product quality, and safety Communicate professionally with leadership team, production control, quality, and other team members as appropriate to resolve machining, product or quality issues Remove parts or completed products from conveyors and pack goods onto pallets Operate forklift in a safe and efficient manner as needed Ensure compliance with company policies, procedures and standards Your Experience, Skills & Education High school diploma or GED is preferred. Experience working in agriculture manufacturing or similar industries preferred. Ability to lift heavy objects, walk, and stand for long periods of time Ability to operate required equipment (eg. mixing machine, conveyor, fork lift) in a safe and responsible manner Ability to respond positively and quickly in a dynamic and changing environment Ability to work individually as well as part of a team Ability to effectively communicate in English, both verbally and in writing Ability to prioritize and manage conflicting demands Why you will love working here: We are doing exciting things, growing, learning and changing the landscape in our industry! Our innovative culture promotes the ability to make a real impact each day. Our growth provides learning opportunities and career paths for strong performers. Competitive hourly rates Comprehensive benefits package that includes: Extended Health care Vision care Dental care 401K matching Vacation - 2 weeks to start Company staff events and casual dress code CBS Bio Platforms embraces diversity and strives to foster an environment that brings the power of diversity to life. We are building a team that represents a variety of backgrounds, perspectives, and skills as diverse as our client base. All qualified applicants will receive consideration. If you require accommodation during the application or interview process, simply let us know and we'll work with you to ensure you have a positive experience. We hire for potential as well as experience. Even if you don't meet every point on the posting, if this role and our company feels like a good fit for you, we encourage you to apply. While all applicants are appreciated, only those who are selected for next steps will be contacted. For more information on CBS Bio Platforms, please visit… ***********************

This is a doing hardware repairs and installations on laptop and desktop units. To be successful in this position, you must have prior experience with laptop and desktop hardware. Job Details: Pay is based solely on the number of calls completed. Calls start at $35 and go up based on distance traveled Pay period: Every Friday after the first week worked Tickets are run Monday-Friday during the day shift. Candidates must be regularly available a minimum of 3 weekdays to be considered. Call volume is variable but is usually 2-5 calls per day You will complete certifications from Dell and Lenovo as part of your onboarding. Certifications are online and free to you. You must have a reliable form of transportation and a valid driver's license to run these calls. You will be visiting multiple work sites throughout your day. You must have access to a computer and the Internet to log onto your portal each day. You must be available to log into your tech portal each morning you are working by 9 am to code your calls and map out your route for the day. The manufacturer has completed troubleshooting and shipped a part prior to your ticket being issued to you. You will confirm service times with the customer in your tech portal. Services will be completed at the customer site (residential and commercial) You will pick up parts daily from the assigned Fed Ex or UPS store for your territory before going onsite. Once all calls are completed for the day drop off the old parts with the pre-paid label that is provided. Qualifications Must have prior hands on experience with replacing components on laptops and desktops Must have a valid driver's license and reliable transportation Must be comfortable with daily local travel Additional Information All your information will be kept confidential according to EEO guidelines.

About The Navys Advanced Electronics / Computer Field (AECF) offers extensive training in electronics, computer systems, radar, communications, and weapons fire control systems, including the Navys advanced missile systems and Aegis radar. These technicians are essential to the ships Combat Systems department, ensuring readiness for combat operations across the fleet. Responsibilities As an Electronics Technician (ET) or Fire Controlman (FC), you may: Maintain and repair radar, communication, and navigation equipment. Operate, maintain, and repair fire control radars, mainframe computers, large screen displays, LANs, weapon control consoles, and automatic gun systems. Troubleshoot and repair electro-mechanical systems used in weapons systems. Support combat systems readiness aboard aircraft carriers, Aegis cruisers, and other surface ships. Work Environment ETs and FCs serve on fleet units worldwide and at shore-based repair facilities. Expect assignments aboard ships, at remote stations, and in technical repair shops. Work is highly technical, requiring precision and teamwork. Training & Advancement Apprentice Technical Training Great Lakes, IL (11 weeks) FC Strand Great Lakes, IL (16 weeks) ET Strand Great Lakes, IL (22 weeks) Training covers electronics theory, radar systems, communications suites, missile and gun system ballistics, troubleshooting, and fiber optics. After A School, technicians may attend advanced C Schools. College credits are often available for Navy training. Education Opportunities Navy College Program & Tuition Assistance Post-9/11 GI Bill College credits via the American Council on Education Industry-recognized certifications through Navy COOL Department of Labor apprenticeships via USMAP Qualifications & Requirements U.S. citizen, eligible for security clearance Normal hearing and color perception Strong aptitude in math, computing, and electronics Ability to work as part of a team and perform detailed technical work Pay & Benefits Competitive salary Enlistment and re-enlistment bonuses Free health insurance & housing Retirement plan Paid training Required qualifications: 18 years or older Legally authorized to work in the United States RequiredPreferredJob Industries Government & Military

Current Employees: If you are a current employee, please apply via the internal career site by logging into your Workday Account and clicking the "Career" icon on your homepage. Primary Location Rapid City, SD USA Department RCH ELab Scheduled Weekly Hours 40 Starting Pay Rate Range $31.31 - $39.14 (Determined by the knowledge, skills, and experience of the applicant.) Job Summary ** $10,000 Sign On Bonus for Qualified Candidates ** Intraoperative Monitoring Technologist will provide neurophysiologic intraoperative monitoring (NIOM) information about the functional integrity of the neural structures in anesthetized patients during surgery. The Intraoperative Monitoring Technologist will be under the direct supervision of a physician with training and experience in NIOM. He/She is proficient in performing Somatosensory Evoked Potentials (SSEPs),EMG monitoring, Transcranial Magnetic Motor Evoked Potentials, Pedicle Screw Stimulation, and EEG monitoring. He/She is proficient with operating monitoring equipment including programming, analyzing data, troubleshooting, and report generation. He/She has the responsibility to give direct training and assistance to the junior technologists. An Intraoperative Monitoring Technologist serves neonates, pediatrics, adolescents, adults, and geriatrics with regards to age specific/cultural diversified needs. Monument Health offers competitive wages and benefits on qualifying positions. Some of those benefits can include: *Supportive work culture *Medical, Vision and Dental Coverage *Retirement Plans, Health Savings Account, and Flexible Spending Account *Instant pay is available for qualifying positions *Paid Time Off Accrual Bank *Opportunities for growth and advancement *Tuition assistance/reimbursement *Excellent pay differentials on qualifying positions *Flexible scheduling Job Description Essential Functions: Performs all Electrodiagnostic Services protocols, procedures, and assessments that have been ordered by a physician. Performs all facets of electroencephalographic and evoked potential testing in the diagnostic laboratory/patient bedside, in accordance with department policy and procedures. All facets include SSEP and EMG monitoring, Transcranial Magnetic Motor Evoked Potentials, Pedicle Screw Stimulation, and EEG, both routine and carotid monitoring. Performs all neurodiagnostic procedures for diagnostic purposes and maintains records of reports as observed by Director of Diagnostic Services. Performs daily calibration and periodic maintenance of all diagnostic testing equipment, records results on maintenance records per departmental policy and reference manuals. Also is proficient in programming monitoring equipment, ability to troubleshoot and work with machine vendors to run the equipment to its full capacity. Maintains an adequate inventory of supplies necessary to the function of the diagnostic laboratory. Properly completes charges for billing. Makes accurate records in department logbook and processes all other department and hospital paperwork. Proficient in generating reports for USMON and PRN physicians. Ensures information is uploaded into systems correctly. Reviews patient records, physician orders, protocols, and data to demonstrate ability for interpretation of subjective and objective information for patient assessment and order validation. Seeks guidance from Director/Supervisor and Medical Director for unresolved issues. Assists other members of the staff maintain skills in performing diagnostic testing. Participates in the orientation, mentorship and education of personnel and students. Provides formal and informal teaching/learning opportunities to assist personnel to achieve and maintain competence necessary for safe and effective practice. Consistently assess, identify, demonstrate the ability to communicate and address special needs of patients that are appropriate to the patient specific age group (neonates Birth - 1 month), (pediatrics 1 month - 12 years), (adolescent 1 years), (adults 1 years), (Geriatric 65+ years) when directly or indirectly providing treatment, testing or patient care and assess their level of understanding. Participates in the evaluation of customer satisfaction as well as adherence to the Guest Relation Standards. All other duties as assigned. Additional Requirements Required: Education - Associates degree in Related Field Certification - Certification in Neurophysiologic Intraoperative Monitoring (CNIM) - Accredited University or accredited training professionals; Electroencephalography (EEG) Technician Registered - American Board of Registration of Electroencephalographic and Evoked Potential Technologists (ABRET) Preferred: Experience - 3+ years of EKG/EEG/ECG Experience Education - Bachelors degree in Health Sciences Physical Requirements: Light work - Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects. Possible exposure to blood, bodily fluids, or tissues. Job Category Diagnostics Job Family Studies Shift Employee Type Regular 10 Monument Health Rapid City Hospital, Inc. Make a difference. Every day. Monument Health is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status.

Current Employees: If you are a current employee, please apply via the internal career site by logging into your Workday Account and clicking the "Career" icon on your homepage. Primary Location Rapid City, SD USA Department RCH ELab Scheduled Weekly Hours 40 Starting Pay Rate Range $31.31 - $39.14 (Determined by the knowledge, skills, and experience of the applicant.) Job Summary ** $10,000 Sign On Bonus for Qualified Candidates ** Intraoperative Monitoring Technologist will provide neurophysiologic intraoperative monitoring (NIOM) information about the functional integrity of the neural structures in anesthetized patients during surgery. The Intraoperative Monitoring Technologist will be under the direct supervision of a physician with training and experience in NIOM. He/She is proficient in performing Somatosensory Evoked Potentials (SSEPs),EMG monitoring, Transcranial Magnetic Motor Evoked Potentials, Pedicle Screw Stimulation, and EEG monitoring. He/She is proficient with operating monitoring equipment including programming, analyzing data, troubleshooting, and report generation. He/She has the responsibility to give direct training and assistance to the junior technologists. An Intraoperative Monitoring Technologist serves neonates, pediatrics, adolescents, adults, and geriatrics with regards to age specific/cultural diversified needs. Monument Health offers competitive wages and benefits on qualifying positions. Some of those benefits can include: *Supportive work culture *Medical, Vision and Dental Coverage *Retirement Plans, Health Savings Account, and Flexible Spending Account *Instant pay is available for qualifying positions *Paid Time Off Accrual Bank *Opportunities for growth and advancement *Tuition assistance/reimbursement *Excellent pay differentials on qualifying positions *Flexible scheduling Job Description Essential Functions: Performs all Electrodiagnostic Services protocols, procedures, and assessments that have been ordered by a physician. Performs all facets of electroencephalographic and evoked potential testing in the diagnostic laboratory/patient bedside, in accordance with department policy and procedures. All facets include SSEP and EMG monitoring, Transcranial Magnetic Motor Evoked Potentials, Pedicle Screw Stimulation, and EEG, both routine and carotid monitoring. Performs all neurodiagnostic procedures for diagnostic purposes and maintains records of reports as observed by Director of Diagnostic Services. Performs daily calibration and periodic maintenance of all diagnostic testing equipment, records results on maintenance records per departmental policy and reference manuals. Also is proficient in programming monitoring equipment, ability to troubleshoot and work with machine vendors to run the equipment to its full capacity. Maintains an adequate inventory of supplies necessary to the function of the diagnostic laboratory. Properly completes charges for billing. Makes accurate records in department logbook and processes all other department and hospital paperwork. Proficient in generating reports for USMON and PRN physicians. Ensures information is uploaded into systems correctly. Reviews patient records, physician orders, protocols, and data to demonstrate ability for interpretation of subjective and objective information for patient assessment and order validation. Seeks guidance from Director/Supervisor and Medical Director for unresolved issues. Assists other members of the staff maintain skills in performing diagnostic testing. Participates in the orientation, mentorship and education of personnel and students. Provides formal and informal teaching/learning opportunities to assist personnel to achieve and maintain competence necessary for safe and effective practice. Consistently assess, identify, demonstrate the ability to communicate and address special needs of patients that are appropriate to the patient specific age group (neonates Birth - 1 month), (pediatrics 1 month - 12 years), (adolescent 1 years), (adults 1 years), (Geriatric 65+ years) when directly or indirectly providing treatment, testing or patient care and assess their level of understanding. Participates in the evaluation of customer satisfaction as well as adherence to the Guest Relation Standards. All other duties as assigned. Additional Requirements Required: Education - Associates degree in Related Field Certification - Certification in Neurophysiologic Intraoperative Monitoring (CNIM) - Accredited University or accredited training professionals; Electroencephalography (EEG) Technician Registered - American Board of Registration of Electroencephalographic and Evoked Potential Technologists (ABRET) Preferred: Experience - 3+ years of EKG/EEG/ECG Experience Education - Bachelors degree in Health Sciences Physical Requirements: Light work - Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects. Possible exposure to blood, bodily fluids, or tissues. Job Category Diagnostics Job Family Studies Shift Employee Type Regular 10 Monument Health Rapid City Hospital, Inc. Make a difference. Every day. Monument Health is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status.

Current Employees: If you are a current employee, please apply via the internal career site by logging into your Workday Account and clicking the "Career" icon on your homepage. Rapid City, SD USA Department RCH ELab Scheduled Weekly Hours 40 Starting Pay Rate Range $31.31 - $39.14 (Determined by the knowledge, skills, and experience of the applicant.) Job Summary $10,000 Sign On Bonus for Qualified Candidates Intraoperative Monitoring Technologist will provide neurophysiologic intraoperative monitoring (NIOM) information about the functional integrity of the neural structures in anesthetized patients during surgery. The Intraoperative Monitoring Technologist will be under the direct supervision of a physician with training and experience in NIOM. He/She is proficient in performing Somatosensory Evoked Potentials (SSEPs),EMG monitoring, Transcranial Magnetic Motor Evoked Potentials, Pedicle Screw Stimulation, and EEG monitoring. He/She is proficient with operating monitoring equipment including programming, analyzing data, troubleshooting, and report generation. He/She has the responsibility to give direct training and assistance to the junior technologists. An Intraoperative Monitoring Technologist serves neonates, pediatrics, adolescents, adults, and geriatrics with regards to age specific/cultural diversified needs. Monument Health offers competitive wages and benefits on qualifying positions. Some of those benefits can include: * Supportive work culture * Medical, Vision and Dental Coverage * Retirement Plans, Health Savings Account, and Flexible Spending Account * Instant pay is available for qualifying positions * Paid Time Off Accrual Bank * Opportunities for growth and advancement * Tuition assistance/reimbursement * Excellent pay differentials on qualifying positions * Flexible scheduling Job Description Essential Functions: * Performs all Electrodiagnostic Services protocols, procedures, and assessments that have been ordered by a physician. * Performs all facets of electroencephalographic and evoked potential testing in the diagnostic laboratory/patient bedside, in accordance with department policy and procedures. All facets include SSEP and EMG monitoring, Transcranial Magnetic Motor Evoked Potentials, Pedicle Screw Stimulation, and EEG, both routine and carotid monitoring. * Performs all neurodiagnostic procedures for diagnostic purposes and maintains records of reports as observed by Director of Diagnostic Services. * Performs daily calibration and periodic maintenance of all diagnostic testing equipment, records results on maintenance records per departmental policy and reference manuals. Also is proficient in programming monitoring equipment, ability to troubleshoot and work with machine vendors to run the equipment to its full capacity. * Maintains an adequate inventory of supplies necessary to the function of the diagnostic laboratory. * Properly completes charges for billing. Makes accurate records in department logbook and processes all other department and hospital paperwork. Proficient in generating reports for USMON and PRN physicians. Ensures information is uploaded into systems correctly. * Reviews patient records, physician orders, protocols, and data to demonstrate ability for interpretation of subjective and objective information for patient assessment and order validation. Seeks guidance from Director/Supervisor and Medical Director for unresolved issues. * Assists other members of the staff maintain skills in performing diagnostic testing. * Participates in the orientation, mentorship and education of personnel and students. Provides formal and informal teaching/learning opportunities to assist personnel to achieve and maintain competence necessary for safe and effective practice. * Consistently assess, identify, demonstrate the ability to communicate and address special needs of patients that are appropriate to the patient specific age group (neonates Birth - 1 month), (pediatrics 1 month - 12 years), (adolescent 1 years), (adults 1 years), (Geriatric 65+ years) when directly or indirectly providing treatment, testing or patient care and assess their level of understanding. * Participates in the evaluation of customer satisfaction as well as adherence to the Guest Relation Standards. * All other duties as assigned. Additional Requirements Required: Education - Associates degree in Related Field Certification - Certification in Neurophysiologic Intraoperative Monitoring (CNIM) - Accredited University or accredited training professionals; Electroencephalography (EEG) Technician Registered - American Board of Registration of Electroencephalographic and Evoked Potential Technologists (ABRET) Preferred: Experience - 3+ years of EKG/EEG/ECG Experience Education - Bachelors degree in Health Sciences Physical Requirements: Light work - Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects. Possible exposure to blood, bodily fluids, or tissues. Job Category Diagnostics Job Family Studies Shift Employee Type Regular 10 Monument Health Rapid City Hospital, Inc. Make a difference. Every day. Monument Health is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status.

The Internal IT Technician is responsible for providing technical support, maintaining internal IT systems, and assisting with infrastructure and security initiatives. This role requires hands-on experience with hardware, software, and network troubleshooting, as well as a working knowledge of compliance frameworks such as SOC 2. Responsibilities and Duties: Provide technical support to internal users across hardware, software, and network issues. Install, configure, and maintain desktops, laptops, printers, and mobile devices. Support Microsoft 365 administration, including user setup, license management, and troubleshooting. Assist with network and server maintenance, including patching, monitoring, and backups. Maintain IT asset inventory and ensure accurate documentation of systems and configurations. Participate in internal audits and support SOC 2 compliance efforts by following and documenting IT policies and procedures. Identify and escalate security risks or non-compliant practices. Collaborate with the IT Manager on projects such as system upgrades, migrations, and new technology rollouts. Qualifications: Associate's or Bachelor's degree in Information Technology, Computer Science, or related field (or equivalent experience). 2+ years of experience in an IT support or technician role. Familiarity with SOC 2 compliance requirements and IT security best practices. Proficiency with Windows OS, Microsoft 365, and basic networking concepts. Strong troubleshooting, communication, and documentation skills. Preferred Skills: Experience with endpoint management tools. Exposure to cloud platforms (Azure, AWS). Understanding of Information Technology Infrastructure. Compensation and Benefits: This position offers competitive pay and an attractive benefits package including medical, dental, vision, life, disability insurance, 401(k), and more. About Vantage Point Solutions Vantage Point Solutions was founded in 2002 by a team who believed in putting people - both employees and clients - first. VPS is a customer-focused, technology-driven engineering and consulting firm serving the broadband, power, and financial industries. The entire team is driven by a commitment to client satisfaction. We work hard to foster a culture of teamwork, respect, and commitment (with a good mix of camaraderie and fun, too). EEO Vantage Point Solutions is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sexual orientation, gender identity, national origin, veteran or disability status.”

Objective A Swine Technician is responsible for the daily care, health, and welfare of pigs in a swine production facility. This role involves performing tasks related to animal husbandry, health management, feeding, breeding, and facility maintenance to ensure the highest standards of swine production. Role and Responsibilities Learn and monitor the health and well-being of swine, ensuring they receive proper nutrition and care. Follow all production protocols and procedures to maximize sow and gilt production & efficiencies. Administer vaccinations, medications, and other health treatments as directed. Ensure pigs have access to adequate feed, air and water. Monitor feed intake and adjust feeding programs as necessary. Identify and report signs of illness or injury, following proper protocols for treatment. Assist with farrowing (birthing) and newborn piglet care, including feeding and processing. Assist in breeding activities, including artificial insemination and pregnancy checks. Monitor sows during gestation and farrowing to ensure a healthy process. Maintain clean and sanitary conditions in barns, pens, and other facilities. Operate and maintain equipment used in swine production. Maintain accurate records of animal health, treatments, and performance in a timely manner Communicate effectively with the employee and the farm management Follow animal welfare, biosecurity regulations and company policies. Qualifications and Education Requirements No experience required. Experience in animal husbandry or swine production is preferred but not required. Strong attention to detail and ability to follow protocols. Work Environment Exposure to loud noises, odors, and varying temperatures. Working with live animals in close quarters. Physical Requirements Standing, walking, and ability to be on feet 8 to 10 hours per day Frequent bending, reaching, squatting, and kneeling Frequent use of one or both hands/arms to grasp or pull Frequent lifting of objects weighing 3-20 pounds Occasional bending while pulling and/or lifting objects weighing up to 50 pounds, or requiring up to 50 pounds of force to move Occasional bending while pulling and/or lifting objects weighing up to 100 pounds or requiring up to 100 pounds of force to move with the assistance of another person as needed Ability to communicate effectively both verbally and in writing Must be able to print and/or write legibly Additional Requirements Willingness to work flexible hours, including weekends and holidays as needed Must have reliable method of transportation to get to work Compensation, Pay & Benefits Benefits Package includes Paid Single Health Insurance, Family Health Coverage available Dental/Vision/Life/Disability Insurance Retirement Plan Holiday pay & Paid Time Off

You will join our Air and Process Team and will assist with air quality monitoring associated with Leak Detection and Repair (LDAR) monitoring programs and other regulatory compliance activities in an industrial setting. This full-time position requires a blend of strong communication skills, and problem-solving abilities, along with 50% - 80% travel to sites within the area. If you thrive in a fast-paced, collaborative environment, this opportunity is ideal for you. Key Responsibilities: This position consists primarily of field-based work and requires walking and standing for extended periods, as well as an ability to work comfortably at heights. Due to the outdoor nature of the role, work occurs in all weather conditions. This role involves approximately 40-45 hours per week, with flexible scheduling. This role also includes up to 50% - 80% overnight nationwide travel, with per diem provided. Qualifications: Must be at least 18 years of age and have a clean driving record and current driver's license. Must be able to pass a background check and drug test. Acceptable employment history with a demonstrated commitment to safe work practices. Acceptable written and oral communication skills with a strong desire to build successful relationships with clients and project team members. Technical and problem-solving skills, including attention to detail and accuracy. A basic mechanical aptitude and an independent work ethic. What We Offer: Industry-leading 401(k) retirement plan, including a 6% discretionary match Paid time off including vacation, flex, sick, paid family medical leave, and holiday pay Comprehensive health insurance program (medical, dental, vision, and prescription) Opportunities for professional development and career growth A collaborative and inclusive work environment Mentoring and opportunities for professional advancement Best-in-class safety culture This position will remain open until a qualified candidate has been selected. Trihydro is an Equal Opportunity, Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital status, genetic information, disability, or because of a protected Veteran status.

Mitsubishi Automotive Technician - Automotive Repair Full-time IN SIOUX FALLS SD Pay: Based on Experience ($60,000 - $100,000 per year) Sign-On Bonus: $7500 At Vern Eide, we've built a business on the values that take us far beyond “business as usual.” It means we condition ourselves for excellence in everything we do. Providing quality vehicles and services to those who trust us. Trust in our product lines. Trust in our words- that what we say is, in fact, what we do. Vern Eide was established in 1965 and is a dynamic and growing employee-owned company that values its team members and provides opportunities for building great careers with incredible futures. As an automotive dealership, we take pride in offering exceptional service to our customers and fostering a positive work environment within our community. We are currently seeking a skilled and experienced Automotive Technician to join our team at Vern Eide Mitsubishi. As an Automotive Technician, you will be responsible for performing automotive repairs and maintenance, contributing to our commitment to delivering top-notch service to our valued customers. Benefits for our next Automotive Technician: Vern Eide Motorcars is committed to providing our employees with a comprehensive benefits package, including: Competitive pay based on experience ($60,000 - $100,000 per year). $7,500 sign-on bonus for qualified candidates. Medical, dental, and vision insurance coverage. Life insurance 401(k) retirement plan with an employee match for long-term financial planning. Employee stock ownership plan (in addition to 401(k) to share in the company's success. Paid time off and holidays Employee discounts on vehicles and services Friendly and supportive work environment Employee Assistance Program Wellness program to support your well-being. Onsite Gym Responsibilities: Diagnose, troubleshoot, and repair mechanical and electrical issues in vehicles. Know of and perform maintenance on automotive systems, including engines, transmissions, brakes, A/C systems, and electrical systems. Perform routine vehicle maintenance and repairs on a variety of vehicles. Utilize your problem-solving skills to identify and resolve complex automotive problems. Work efficiently and maintain high-quality standards to meet customer expectations. Ensure compliance with safety and company guidelines during all repair procedures. Requirements: Minimum of 3 to 5 years of automotive technician experience with a focus on international vehicles. Education/training in automotive repair and manufacturer certifications. Possess your own set of automotive tools. A valid driver's license and a safe driving record are required. Positive team player with a can-do attitude and a willingness to learn and grow. Must be able to pass a background check and drug test. Must have a clean driving record. Must be at least 18 years old Work Schedule: Monday to Friday, with every third Saturday allowing for a work-life balance. If you have the required experience and qualifications and are excited to join a dynamic, employee-owned company committed to customer satisfaction, we encourage you to apply. We are an equal opportunity employer.

Purpose: Independently performs complex on-site diagnostics, service repairs and maintenance work on customer agricultural and turf equipment. May require some direction or guidance from the Service Manager, Service Location Manager, or Shop Foreman. Responsibilities: Performs complex on-site diagnostics and repairs on agricultural and turf equipment and established Ag Management Solutions (AMS) products Participates in required Service EDUCATE Training programs Supports customer clinics Reviews and explains any maintenance, repair, or other service concerns directly with the customer and documents on work order May promote and sell dealer service programs directly to customers May establish and implement effective stocking processes with the Parts Department to maintain the proper seasonal parts inventory in the vehicle Maintains current knowledge of John Deere and competitive products Maintains condition of mobile service vehicle, trailer, inventory, tools and equipment Follows all safety rules and regulations in performing work assignments Completes all reports and forms required in conjunction with work assignments Accounts for all time and material used in performing assigned duties Qualifications: Experience with truck and agricultural equipment tires is preferred Strong mechanical knowledge with attention to detail Proficiency in using tools and equipment for tire installation and repair Ability to diagnose tire-related issues and recommend appropriate solutions Self-motivated Ability to work independently and in a team environment Experience connecting with customers, maintaining a professional image and establishing rapport Demonstrated basic understanding of the selling processes Demonstrated ability to manage multiple projects simultaneously with a degree of independence Ability to lift, carry, and move heavy objects up to 100 pounds Must be able to drive forklift for unloading and loading tires Valid driver's license and clean driving record for service calls Qualifications Company History: Founded in 1937 by Charles Jacob Grossenburg and his wife Blanche, Grossenburg Implement started as a small family business with a big vision: to provide cutting-edge farming technology and unmatched service to the local community. What began with a passion for selling John Deere tractors during WWII has blossomed into a generational company with a reputation for hard work, dedication, and innovation. Today, we proudly carry on this legacy as a fourth-generation, family-owned business. Our Mission: To provide the best product at a reasonable price with the highest level of service. Our Vision: Successfully maintain the core values of a generational business while embracing innovations in the industry, focusing on customer service, employee compensation, and community patronage. Our Heritage: For over 85 years, Grossenburg Implement has been a family-oriented company, dedicated to service, trust, and integrity. Founded by C.J. and Blanche Grossenburg, our business has been passed down through the generations, with each family member contributing to the company's ongoing success. Today, we continue to honor the traditions of those who built this company while looking to the future with pride and excitement. Why Join Us? At Grossenburg Implement, we are more than just a company-we are a family. From the day our founders, Charles and Blanche Grossenburg, opened their doors, we've built our business around family values, integrity, and dedication to service. Our work environment is collaborative, supportive, and driven by a sense of purpose to continue the legacy of service and growth. As part of our team, you will have the chance to contribute to the ongoing success of a company that's been part of the community for generations. What We Offer: A family-oriented and supportive work environment. Opportunities for professional growth and advancement. Competitive compensation and benefits package. The chance to make a meaningful impact on the company's financial health and long-term success.

Maintenance Mechanics are also involved in routine tasks, such as lubrication of machinery, seal replacement, cleaning of parts during repair, adjusting valves and seals, investigating breakdowns, removing, and replacing motors, starters, relays, limit switches, fuses, primary control components. Must be able to read blueprints and schematic drawings to determine work procedures. Must be able to safety and correctly use hand and power tools. Ability to troubleshoot mechanical problems, control and power electrical systems, hydraulics, and/or pneumatics and focus on problem solving issues. Responsibilities and skills in, but not limited to; installing, maintaining, dismantling, and repairing new and existing machinery or equipment and its components such as machining centers, press brakes, burn tables, mechanical clutches, gear boxes, control and power electrical systems, hydraulic and pneumatic control systems. ESSENTIAL DUTIES AND RESPONSIBILITIES (may include but not limited to) Install, maintain, overhaul, modify and repair machinery and stationary equipment (e.g. conveyors, hydraulic systems, pneumatic devices, pumps, engines, motors, programmable logic controls, machining centers, press brakes, burn tables, etc.) Inspect and examine machinery and equipment to detect and investigate irregularities and malfunctions through troubleshooting production problems and taking preventive or corrective action Perform pre- and post-operational checks of equipment ensuring operating safety devices function properly upon completion of repairs, modifications and installations Read and interpret blueprints, manuals, schematics, and process specifications to visualize layouts and guide work Collect, analyze, summarize, and communicate information, irregularities, or trends in order to prepare mechanical maintenance reports to support ongoing maintenance program requirements Collaborate with production departments and maintenance shop personnel to ensure maintenance requirements are completed in timely fashion Maintain a clean, orderly and safe work environment practicing 6S principles, environmental sustainability, and continuous improvement related to maintenance processes and procedures Operate hoisting and lifting devices such as cranes, jacks, forklifts, scissor or boom lifts to position equipment and parts during the installation, set-up, and repair of machinery Maintain all equipment by performing routine repair work, daily, weekly, monthly, quarterly, and annual maintenance Perform minor repairs which should include, mechanical, plumbing, building and grounds to keep the entire facility in working order Coordinate any electrical repairs with electrician or contracted Electrician Responsible for observing and following all safety procedures and regulations Miscellaneous other duties as directed by department supervisor To be successful in this role, your experience and competencies are: High school diploma or general education degree (GED) Minimum four (4) years' experience as a mechanic, maintenance mechanic, or millwright. Ability to accurately read and interpret schematics, blueprints and other related drawings Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals Ability to apply concepts such as basic math skills, fractions, micrometers, percentages, ratios, proportions to practical situations, and able to convert decimals into inches Ability to accurately read and interpret a tape measure, blueprints, and bills of material (BOM's) Continue to grow lean knowledge and use the tools to identify and assist with continuous improvement Skilled in working efficiently and accurately to keep up with production requirements Safe material handling skills in working with steel Capacity to learn quickly, parts machined are unique to manufactured equipment and change orders are frequent Flexible and adaptable in coping with pressures, deadlines, and rapidly changing situations Self-starter, self-motivated, and flexible using a variety of skills and the ability to change tasks as needed Maintain positive, cooperative working relationships by working, acting, and communicating with various personalities getting along with customers, vendors, co-workers and management working both individually and as part of a team Our Culture and Values Employees that become part of Astec embody the values below throughout their work. Continuous devotion toeting the needs of our customers Honesty and integrity in all aspects of business Respect for all individuals Preserving entrepreneurial spirit and innovation Safety, qua melity and productivity as means to ensure success Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person's veteran status or any other characteristic protected by law or executive order. Job Type: Full-time

This is a doing hardware repairs and installations on laptop and desktop units. To be successful in this position, you must have prior experience with laptop and desktop hardware. Job Details: Pay is based solely on the number of calls completed. Calls start at $35 and go up based on distance traveled Pay period: Every Friday after the first week worked Tickets are run Monday-Friday during the day shift. Candidates must be regularly available a minimum of 3 weekdays to be considered. Call volume is variable but is usually 2-3 calls per day You will complete certifications from Dell and Lenovo as part of your onboarding. Certifications are online and free to you. You must have a reliable form of transportation and a valid driver's license to run these calls. You will be visiting multiple work sites throughout your day. You must have access to a computer and the Internet to log onto your portal each day. You must be available to log into your tech portal each morning you are working by 9 am to code your calls and map out your route for the day. The manufacturer has completed troubleshooting and shipped a part prior to your ticket being issued to you. You will confirm service times with the customer in your tech portal. Services will be completed at the customer site (residential and commercial) You will pick up parts daily from the assigned Fed Ex or UPS store for your territory before going onsite. Once all calls are completed for the day drop off the old parts with the pre-paid label that is provided. Qualifications Must have prior hands on experience with replacing components on laptops and desktops Must have a valid driver's license and reliable transportation Must be comfortable with daily local travel Additional Information All your information will be kept confidential according to EEO guidelines.

About The Navys Advanced Electronics / Computer Field (AECF) offers extensive training in electronics, computer systems, radar, communications, and weapons fire control systems, including the Navys advanced missile systems and Aegis radar. These technicians are essential to the ships Combat Systems department, ensuring readiness for combat operations across the fleet. Responsibilities As an Electronics Technician (ET) or Fire Controlman (FC), you may: Maintain and repair radar, communication, and navigation equipment. Operate, maintain, and repair fire control radars, mainframe computers, large screen displays, LANs, weapon control consoles, and automatic gun systems. Troubleshoot and repair electro-mechanical systems used in weapons systems. Support combat systems readiness aboard aircraft carriers, Aegis cruisers, and other surface ships. Work Environment ETs and FCs serve on fleet units worldwide and at shore-based repair facilities. Expect assignments aboard ships, at remote stations, and in technical repair shops. Work is highly technical, requiring precision and teamwork. Training & Advancement Apprentice Technical Training Great Lakes, IL (11 weeks) FC Strand Great Lakes, IL (16 weeks) ET Strand Great Lakes, IL (22 weeks) Training covers electronics theory, radar systems, communications suites, missile and gun system ballistics, troubleshooting, and fiber optics. After A School, technicians may attend advanced C Schools. College credits are often available for Navy training. Education Opportunities Navy College Program & Tuition Assistance Post-9/11 GI Bill College credits via the American Council on Education Industry-recognized certifications through Navy COOL Department of Labor apprenticeships via USMAP Qualifications & Requirements U.S. citizen, eligible for security clearance Normal hearing and color perception Strong aptitude in math, computing, and electronics Ability to work as part of a team and perform detailed technical work Pay & Benefits Competitive salary Enlistment and re-enlistment bonuses Free health insurance & housing Retirement plan Paid training Required qualifications: 18 years or older Legally authorized to work in the United States RequiredPreferredJob Industries Government & Military

Job DescriptionDescription: Mitsubishi Automotive Technician - Automotive Repair Full-time IN SIOUX FALLS SD Pay: Based on Experience ($60,000 - $100,000 per year) Sign-On Bonus: $7500 At Vern Eide, we've built a business on the values that take us far beyond “business as usual.” It means we condition ourselves for excellence in everything we do. Providing quality vehicles and services to those who trust us. Trust in our product lines. Trust in our words- that what we say is, in fact, what we do. Vern Eide was established in 1965 and is a dynamic and growing employee-owned company that values its team members and provides opportunities for building great careers with incredible futures. As an automotive dealership, we take pride in offering exceptional service to our customers and fostering a positive work environment within our community. We are currently seeking a skilled and experienced Automotive Technician to join our team at Vern Eide Mitsubishi. As an Automotive Technician, you will be responsible for performing automotive repairs and maintenance, contributing to our commitment to delivering top-notch service to our valued customers. Benefits for our next Automotive Technician: Vern Eide Motorcars is committed to providing our employees with a comprehensive benefits package, including: Competitive pay based on experience ($60,000 - $100,000 per year). $7,500 sign-on bonus for qualified candidates. Medical, dental, and vision insurance coverage. Life insurance 401(k) retirement plan with an employee match for long-term financial planning. Employee stock ownership plan (in addition to 401(k) to share in the company's success. Paid time off and holidays Employee discounts on vehicles and services Friendly and supportive work environment Employee Assistance Program Wellness program to support your well-being. Onsite Gym Responsibilities: Diagnose, troubleshoot, and repair mechanical and electrical issues in vehicles. Know of and perform maintenance on automotive systems, including engines, transmissions, brakes, A/C systems, and electrical systems. Perform routine vehicle maintenance and repairs on a variety of vehicles. Utilize your problem-solving skills to identify and resolve complex automotive problems. Work efficiently and maintain high-quality standards to meet customer expectations. Ensure compliance with safety and company guidelines during all repair procedures. Requirements: Minimum of 3 to 5 years of automotive technician experience with a focus on international vehicles. Education/training in automotive repair and manufacturer certifications. Possess your own set of automotive tools. A valid driver's license and a safe driving record are required. Positive team player with a can-do attitude and a willingness to learn and grow. Must be able to pass a background check and drug test. Must have a clean driving record. Must be at least 18 years old Work Schedule: Monday to Friday, with every third Saturday allowing for a work-life balance. If you have the required experience and qualifications and are excited to join a dynamic, employee-owned company committed to customer satisfaction, we encourage you to apply. We are an equal opportunity employer. Requirements: Minimum of 3 to 5 years of automotive technician experience with a focus on international vehicles. Education/training in automotive repair and manufacturer certifications. Possess your own set of automotive tools. A valid driver's license and a safe driving record are required. Positive team player with a can-do attitude and a willingness to learn and grow. Must be able to pass a background check and drug test. Must have a clean driving record. Must be at least 18 years old

About The Navys Advanced Electronics / Computer Field (AECF) offers extensive training in electronics, computer systems, radar, communications, and weapons fire control systems, including the Navys advanced missile systems and Aegis radar. These technicians are essential to the ships Combat Systems department, ensuring readiness for combat operations across the fleet. Responsibilities As an Electronics Technician (ET) or Fire Controlman (FC), you may: Maintain and repair radar, communication, and navigation equipment. Operate, maintain, and repair fire control radars, mainframe computers, large screen displays, LANs, weapon control consoles, and automatic gun systems. Troubleshoot and repair electro-mechanical systems used in weapons systems. Support combat systems readiness aboard aircraft carriers, Aegis cruisers, and other surface ships. Work Environment ETs and FCs serve on fleet units worldwide and at shore-based repair facilities. Expect assignments aboard ships, at remote stations, and in technical repair shops. Work is highly technical, requiring precision and teamwork. Training & Advancement Apprentice Technical Training Great Lakes, IL (11 weeks) FC Strand Great Lakes, IL (16 weeks) ET Strand Great Lakes, IL (22 weeks) Training covers electronics theory, radar systems, communications suites, missile and gun system ballistics, troubleshooting, and fiber optics. After A School, technicians may attend advanced C Schools. College credits are often available for Navy training. Education Opportunities Navy College Program & Tuition Assistance Post-9/11 GI Bill College credits via the American Council on Education Industry-recognized certifications through Navy COOL Department of Labor apprenticeships via USMAP Qualifications & Requirements U.S. citizen, eligible for security clearance Normal hearing and color perception Strong aptitude in math, computing, and electronics Ability to work as part of a team and perform detailed technical work Pay & Benefits Competitive salary Enlistment and re-enlistment bonuses Free health insurance & housing Retirement plan Paid training Required qualifications: 18 years or older Legally authorized to work in the United States RequiredPreferredJob Industries Government & Military