Technician jobs in Tacoma, WA - 2,007 jobs

Senior Water Restoration Technician Pay: $41,600 - $60,000 per year Job Type: Full-time Schedule: 8-hour shifts Overtime available On-call rotation required Job Purpose The Senior Water Restoration Technician is responsible for completing professional water damage restoration services for residential and commercial structures. This role utilizes state-of-the-art drying equipment and mobile technology to track, document, and confirm proper job completion while delivering excellent customer service. Key Responsibilities Perform water damage mitigation and restoration services as part of a team. Execute demolition and removal of water-damaged materials. Set up, monitor, and adjust specialty drying equipment to ensure proper drying conditions. Develop and execute effective drying plans based on job conditions. Complete daily job documentation, moisture readings, and billing information digitally. Meet with customers to explain the restoration process and provide clear communication throughout the project. Maintain quality service by following company standards, procedures, and safety guidelines. Communicate job progress, irregularities, and ongoing needs with management and team members. Maintain professional and technical knowledge through training, workshops, and industry publications. Contribute to team success by assisting with related tasks as needed. Required Experience Minimum 2 years of hands-on water restoration experience Skills & Qualifications IICRC Certification preferred Strong problem-solving and critical-thinking skills High attention to detail and quality-focused mindset Ability to sketch drying plans and document job details Strong communication and customer service skills Conceptual and strategic planning abilities AutoCAD experience preferred but not required Benefits Medical Allowance Paid Time Off (PTO) Paid Holidays Supplemental Pay Bonus opportunities based on performance

Telecom Tehcnician Duration: 6 months, possible to extend Bill Rate: $30-34/hr Interview: 1 and done virtual Required Experience: - 2+ years of experience in telecom, desktop support, helpdesk, system administration, or similar - Knowledge of Cisco VoIP system and devices. - Experience working in IDF/MDF closets, including patch panel management and cable organization Day-to-Day: Install, configure, and maintain telecommunication systems (VoIP, PBX, routers, switches). Perform cabling and wiring for voice and data networks. Troubleshoot and resolve issues related to call quality, connectivity, and hardware failures. Monitor system performance and implement upgrades or patches as needed. Collaborate with IT and network teams to ensure seamless integration of telecom systems. Maintain accurate documentation of configurations, changes, and inventory. Respond to onsite service requests and provide end-user support for telecom-related issues. Benefits packages for this role will start on the 31st day of employment and include medical, dental, and vision insurance, as well as HSA, FSA, and DCFSA account options, and 401k retirement account access with employer matching. Employees in this role are also entitled to paid sick leave and/or other paid time off as provided by applicable law

ABM, a leading provider of integrated facility solutions, is looking for a Facilities Maintenance Technician. The Facilities Maintenance Technician will complete assigned preventive maintenance and reactive maintenance repairs requiring conveyor, mechanical, plumbing, electrical, instrumentation, HVAC and other equipment, systems or structures. Ensures repairs and maintenance to all equipment and facilities. Responds to spills and other emergency situations, performing tasks necessary. Assists in emergencies as needed. Pay: $30/HR+ DOE The pay listed is the hourly range or the hourly rate for this position. A specific offer will vary based on applicant's experience, skills, abilities, geographic location, and alignment with market data. Benefit Information: ABM offers a comprehensive benefits package. For information about ABM's benefits, visit Annual Benefits-Staff and Management Responsibilities: Completes assigned preventive maintenance and reactive maintenance repairs requiring conveyor, mechanical, plumbing, electrical, instrumentation, HVAC and other equipment, systems or structures Ensures repairs and maintenance to all equipment and facilities Responds to spills and other emergency situations, performing tasks as necessary Assists in emergencies as needed $30 - $34 an hour We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airlines is excited to offer opportunities for a Refrigeration & Air Conditioning Technician to join our Facilities team in Puget Sound, Washington. As a Refrigeration & Air Conditioning Technician, you will have the opportunity to work on a diverse range of HVAC-R equipment, including heating, ventilation, air conditioning, and refrigeration systems. Your expertise will be essential in laying out, constructing, installing, maintaining, and troubleshooting these systems to ensure optimal performance in our plant facilities. You will engage with advanced controls and components, utilizing your skills to read blueprints, make precise adjustments, and perform routine maintenance. Your role will involve collaborating with various teams, diagnosing malfunctions, and implementing effective solutions to enhance system reliability. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities Lay out, construct, install, maintain, and repair HVAC-R equipment, including associated controls and components. Work from blueprints, sketches, and verbal instructions to complete assigned tasks effectively. Utilize testing equipment to read and adjust controls for optimal system performance. Install and adjust valve controls, perform electrical wiring, and set up electronic controls for HVAC-R systems. Troubleshoot, repair, and maintain various types of refrigeration and air conditioning equipment. Conduct routine maintenance on HVAC-R systems according to the Preventative Maintenance schedule. Service HVAC-R equipment in office, commercial, and industrial settings based on service requests. Collaborate with customers, vendors, and engineers to gather information on equipment operations and maintenance history. Monitor system operations using the Energy Management Control System (EMCS) and perform visual inspections for defects. Diagnose malfunctions in mechanical, electrical, plumbing, or electronic systems and develop corrective action plans. Maintain and program moisture control, airflow, and thermal balance to ensure indoor air quality. Install, maintain, and leak test refrigeration systems, adhering to safety practices and refrigerant handling protocols. Assemble and attach refrigeration components using appropriate methods, including soldering and brazing. Perform precision alignment of equipment using tools such as lasers and dial indicators. Monitor and maintain water and chemicals in open and closed systems to ensure compliance with specifications. Operate mechanical lifts safely while adhering to personal protective equipment guidelines. Consult with co-workers, supervisors, or engineers when assistance is needed and document repairs and modifications upon job completion. Maintain required certifications, including EPA Universal Refrigerant Technician Certification and Lock Out/Tag Out procedures. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic Qualifications: 3+ years of experience in Commercial/Industrial heating, ventilation and air conditioning (HVAC) field performing trouble shooting, maintaining & repairing equipment Must possess a card from a certifying organization approved by the EPA (Environmental Protection Agency), that shows you to be certified as a Universal technician as required by 40 CFR (Code or Federal Regulations) part 82, Subpart Must be able to complete Fall Protection Training Must be physically able to lift 35 or more pounds during a shift Typical Education & Experience: High school graduate or GED preferred. Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Pay: $41.00/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Feb. 28, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Maintenance Mechanic Employment Type: Full-Time (Staffing-to-Permanent) Schedule: 4:30 AM- 1:00 PM Pay Rate: $28.00/h Essential Responsibilities Promptly performs troubleshooting assessments, repairs and maintenance functions in response to service calls and emergency calls plant wide. Performs schedule preventative maintenance on all processing equipment as assigned by Maintenance manager. Conducts daily inspections on equipment. Completes routine maintenance and repairs on processing equipment & building. Follows all company safety policies and procedures. Responds to change productively and handles other duties as required. Required Qualifications Basic electrical knowledge is a plus Welding skills a plus Motivated self-starter who is able to work both independently and as a team Ability to communicate clearly both verbally and in writing Mandatory Requirements ✅ Authorized to work in the U.S. (E-Verify participation) ✅ Background check clearance ✅ Drug test required Benefits Package (After 90 Days) ️ 10 days PTO per year (with 3-year carryover) Medical, Dental, and Vision Insurance ️ All PPE provided (except shoes and pants)

Job Title: Crane B Mechanic Job Type: Contract The Crane B Mechanic is a journey-level maintenance professional responsible for inspecting, troubleshooting, repairing, and maintaining cranes and weight handling equipment at Naval Base Kitsap. Working under general supervision, using hand tools, power tools, and precision testing instruments to diagnose mechanical, electrical, and electro-mechanical issues; replace or fabricate components; and ensure safe, reliable crane operations in accordance with manufacturer specifications, Navy PQP requirements, and NAVFAC standards. The role requires strict adherence to safety, quality, and performance standards while supporting mission-critical lifting operations in a secure government environment. Duties & Responsibilities Performs crane and other weight handling equipment (WHE) maintenance in accordance with diagrams, sketches, operation manuals and manufacturer's specifications. Performs the work of a journey-level Crane Maintenance Mechanic with general supervision by a more experienced Crane Mechanic. Repairs and maintains cranes, and trackage, using hand tools, power tools, and precision measuring and testing instruments. Dismantles devices to gain access to and remove defective parts, using hoists, cranes, hand tools, and power tools. Examines form and texture of parts to detect imperfections. Inspects used parts to determine changes in dimensional requirements, using rules, calipers, micrometers, and other measuring instruments. Adjusts functional parts of devices and control instruments, using hand tools, levels, and precision tools. Repairs or replaces defective parts, using hand tools and power tools. Installs special functional and structural parts in devices, using hand and power tools. Starts devices to test their performance. Lubricates and cleans parts. Makes and repairs parts as needed. Repairs electro-mechanical equipment if needed. Performs other related duties as assigned. May perform work in other classifications when incidental work is necessary to the accomplishment of the work assignment. Significant work in another job classification may be required if accompanied by any wage adjustments applicable. Accountable for The proper use of tools and equipment commonly used in the Crane Mechanic field. Completing all mandated training requirements by government and management directives. Timely and cost-effective performance of duties. Timely completion and accuracy of all departmental work. Dealing with a variety of people in a professional, courteous manner in diversified situations. Adherence to established company safety policies and good industrial and office safety practices. Compliance with company Standard Operating Procedures and Personnel policies and procedures. Must obtain and maintain required explosive certifications when assigned to ordnance operations. Having the ability to work well under pressure. Experience & Qualifications - Mandatory Must be a U.S. Citizen. Not open to Citizens of other Nations. Ability to obtain a thorough knowledge in the performance of the tasks listed in the U.S. Navy Personnel Qualification Program (PQP) for "Crane Maintenance Mechanic ", using tools and instruments listed and others common to the trade within 6 months. Must obtain and maintain required NAVFAC P-307 crane operator license within 12 months. Journey-level Maintenance Mechanic with a minimum of four (4) years' experience on cranes and crane repair to include air, manual, electric overhead, and dockside portals with a capacity range to 120 tons. Four (4) years' experience with either fabrication or maintenance of mobile crane electrical and electronic systems or a combination of both. Must have and maintain hand tools of the trade to perform the normal work of the classifications. Must have knowledge of, and know how to use, specialized tools needed to perform repair functions. Ability to troubleshoot equipment. Ability to climb ladders and work at heights. Ability to work odd shifts and overtime. Ability to meet and maintain company physical and security requirements, including respirator qualification, and clearance eligibility when required. Must possess good communication skills for a service team environment. Valid state driver's license with acceptable driving record Ability to successfully pass any background checks and/or drug testing

About The Navys Advanced Electronics / Computer Field (AECF) offers extensive training in electronics, computer systems, radar, communications, and weapons fire control systems, including the Navys advanced missile systems and Aegis radar. These technicians are essential to the ships Combat Systems department, ensuring readiness for combat operations across the fleet. Responsibilities As an Electronics Technician (ET) or Fire Controlman (FC), you may: Maintain and repair radar, communication, and navigation equipment. Operate, maintain, and repair fire control radars, mainframe computers, large screen displays, LANs, weapon control consoles, and automatic gun systems. Troubleshoot and repair electro-mechanical systems used in weapons systems. Support combat systems readiness aboard aircraft carriers, Aegis cruisers, and other surface ships. Work Environment ETs and FCs serve on fleet units worldwide and at shore-based repair facilities. Expect assignments aboard ships, at remote stations, and in technical repair shops. Work is highly technical, requiring precision and teamwork. Training & Advancement Apprentice Technical Training Great Lakes, IL (11 weeks) FC Strand Great Lakes, IL (16 weeks) ET Strand Great Lakes, IL (22 weeks) Training covers electronics theory, radar systems, communications suites, missile and gun system ballistics, troubleshooting, and fiber optics. After A School, technicians may attend advanced C Schools. College credits are often available for Navy training. Education Opportunities Navy College Program & Tuition Assistance Post-9/11 GI Bill College credits via the American Council on Education Industry-recognized certifications through Navy COOL Department of Labor apprenticeships via USMAP Qualifications & Requirements U.S. citizen, eligible for security clearance Normal hearing and color perception Strong aptitude in math, computing, and electronics Ability to work as part of a team and perform detailed technical work Pay & Benefits Competitive salary Enlistment and re-enlistment bonuses Free health insurance & housing Retirement plan Paid training Required qualifications: 18 years or older Legally authorized to work in the United States RequiredPreferredJob Industries Government & Military

Hi, I hope you are doing good. I have a job opportunity related to your profile with one of our client, please find below Job Description for your review. If you are interested and available for the following position then please send your updated resume in word format along with your contact details to discuss further. Note: Client is willing to Provide the Re-location Assistance. Role: Technology Lead - Java/J2EE/Microservices Duration: Full TIme Location: Tukwila, WA Qualifications Basic • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. At least 4 years of experience in IT. Preferred At least 2 years of hands-on Software Development experience in Java/J2EE platform • At least 1 year of experience working in Micro Services based architecture. • Knowledge in Pivotal Cloud Foundry (PCF), No SQL (MongoDB) is a plus • Knowledge on at least one Relational Databases and ORM technologies • Experience in designing and developing web/Data Warehouse applications. • Good working knowledge of OO concepts, Design Patterns, UML. • Experience in working in Agile and Iterative Development Methodologies • Experience with continuous integration and build tools such as Ant, Maven, Jenkins, etc. • Experience with Red hat Linux, Unix or Windows operating systems • Experience with application performance tuning, debugging and troubleshooting • Experience in working with Geo-diversified teams • Excellent Oral and Written communication skills, Customer Interfacing Skills and Documentation Skills • Ability to communicate complex ideas to technical and non-technical audience • Participate & drive requirements discussion with end-users/customers • Guide the development team • Document requirements • Develop UI wireframes • Design and Development of system • Create Test Plans • Perform Functional Testing including regression testing • Prepare build and deployments scripts • Deployment, Implementation and Post-production support • At least 2 years of experience in software development life cycle. • Analytical skills • Experience and desire to work in a Global delivery environment Qualifications • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. Additional Information All your information will be kept confidential according to EEO guidelines.

Seattle, USA Type: Permanent Apply Share Job title: Technical Operations Center (TOC) Operator Our Company We're more than just a workplace - we're a community of people who care about doing meaningful work, supporting each other, and growing together. Whether you're just starting out or looking to take the next step in your career, we believe in creating roles that energise, challenge, and inspire. We're committed to designing jobs that are sustainable, flexible, and aligned with your strengths - because we know that when work works for people, people do their best work. Visit our Careers Portal to explore our culture, benefits, and current opportunities. You'll find stories from our people and insights into how we work. A brief summary We are looking for a skilled Technical Operations Center (TOC) Operator to join our team to ensure broadcast quality and connectivity is maintained to the highest operational level. The TOC Operator will provide critical responses in a dynamic broadcasting environment and will work as part of a high performing Global team in a collaborative manner. They will work with the wider Engineering and Operations team using the very latest technology managing platform channels, ensuring the correct ad insertion rotation, and QC'ing the distribution paths for remote partners across a cloud-based infrastructure. The ideal candidate will need to be a clear and confident communicator, be able to adapt quickly to on-air changes and remain calm under pressure. Their aim will be to ensure the highest quality visual presentation that informs and inspires viewers and audiences from all around the world. An ability to focus and maintain concentration while being flexible to problem solve is key. In this role, the TOC Operator will be an integral part of the organization's TOC team and will work under the guidance of the TOC Lead while reporting to the Service Delivery Manager. The position is based in the greater Seattle area. The position may require international travel on occasion. The successful candidate will be assigned to the Remote Broadcast Center owned and operated by Riot Games. They will work across the Riot Games' Esport broadcasts featuring championships and tournaments from titles: League of Legends, Wild Rift and Valorant. The TOC Operator will be working with the latest technology in the most advanced Remote Broadcast Center in the World. What you'll be responsible for * Building, configuring, and monitoring complex OTT distribution workflows for remote partners, Costreamers, public platforms, and any other distribution partner worldwide. * Platform channel management, ad insertion during live events and chat moderator assignment. * Critical assessment of video and audio contribution feeds, proactive monitoring with rapid action to restore service using pre-defined emergency procedures. * Rebroadcasts with the insertion of adverts on partner platforms. * Maintain accurate and timely entries into the event's log throughout the event. * Monitoring of all transmission equipment and software, escalating faults accordingly. * Assist with Media tagging and other departmental tasks outside of show times. * Managing the inbuilt system redundancy to ensure that minimum disruption to services is caused by equipment failures. • Assist with other departmental tasks outside of show times. * Update and maintain all SOPs and contribute to new SOPs and the sharing of business/skill knowledge. * Performing regular reporting on performance of the Centers by identifying and tracking data for KPIs. * Imparting skill and knowledge to co-workers and colleagues. * Perform other job-related duties as assigned. This role is for you if Required Qualifications * 3+ years proven experience with video transmission, encoding and decoding, a Technical Operations Center, or Broadcast Master Control environment. * Knowledge of cloud-based and on-prem live streaming, encoding, and packaging solutions. * An understanding of the conversion of baseband video to a compressed video format to facilitate delivery across a variety of networks and platforms. * Experience in a live event production operation environment, preferably sports. * Background working with cloud-based and file-accelerated media upload applications. * Experience with OTT monitoring and compliance. * Fundamental understanding of IT networking infrastructure. * Detailed operational knowledge of tools used to diagnose issues with video and audio feeds, including waveform monitors and audio monitoring units. Salary Range: $33.65 To $40.87 Hourly Apply Share Back to vacancies

Wastequip WRX's service division has an immediate opportunity for a Lead Service Tech to support our Pacific, WA service operation. This role is critical to ensure the reliability and performance of our customers' equipment along with supporting Wastequip. Hourly rate range: $46.00 - $50.00 (Based on experience) + Quarterly bonuses. Key Responsibilities: Diagnose and repair mechanical, electrical, and hydraulic issues on all makes of refuse equipment. (e.g., front loaders, rear loaders, roll-offs, automated side loaders). Utilize welding and fabricating skills to repair and maintain equipment. Maintain accurate service records and documentation. Communicate effectively with customers and the internal service team. Travel may be required for on-site repairs at customer locations. Provide technical guidance and mentorship to junior mechanics. Support and maintain equipment across Wastequip's internal brands, ensuring consistency in service quality and technical standards. Ensure all work is performed safely and in compliance with company and OSHA standards. Qualifications: Proven experience in heavy equipment repair, preferably in refuse or fleet services. The ideal candidate will bring leadership, technical expertise, and a commitment to safety and service excellence. Strong diagnostic skills across mechanical, electrical, and hydraulic systems. Must have the ability to read and repair hydraulic systems along with electrical schematics and repair and diagnose connections of circuitry. Ability to lift 50lbs plus, bend, stoop, kneel and climb ladders. Above all, must be able to work closely with co-workers or other team members. Proficiency in welding and fabrication. Excellent communication and organizational skills. Valid driver's license, clean driving record, and ability to travel as needed. The preferable candidate would have a CNG certificate and a CDL or must be able to obtain CNG Certificate and CDL after being hired. Skills and Competencies: Excellent troubleshooting and problem-solving skills. Ability to work independently and as part of a team. Strong communication and customer service skills. Attention to detail and organizational skills. Company Benefits: • 2 Medical Plan Options - Base HSA (High Deductible) and Buy-Up Medical Plans • Prescription (Rx) Insurance • Health Savings Account (HSA) • 2 Dental Plan Options - Base Dental and Buy-Up Dental Plans • Vision Insurance • Flexible Spending Accounts (FSA's) • Health Care FSA • Dependent Care FSA • Company Paid Base Life Insurance • Company Paid Accident, Death & Dismemberment Insurance • Company Paid Business Travel Accident Insurance • Company Paid Disability Insurance ▪ Short-Term Disability (STD) and Base Long-Term Disability (LTD) Insurance • Employee Assistance Program (EAP) • Voluntary Hospital, Accident & Critical Illness (Cancer) Insurance • 401(K) Retirement Plan with 50% Company Match • Voluntary Pet Insurance • Vacation and Personal/Sick Time • Paid Grandparent Leave • Paid Bonding Leave • Adoption Assistance • Education Assistance (Tuition Reimbursement) About Wastequip Wastequip got its start in 1989 with containers and compactors. But, today, we have evolved into so much more than just a manufacturer of high-quality steel containers and compactors. We are the waste industry's only All-in-One solutions provider - from carts and containers to collect waste to hoists and trash trucks to move the waste to parts, service and technology to keep your operation running smoothly. While we're proud to be North America's leading manufacturer of waste handling equipment, we are equally proud to be a driving force for enhanced sustainability across the waste industry. We are consistently striving to improve our own operations while making it easier for our customers to do the right thing - building a brighter future for all.

Jobs for Humanity is partnering with DISH to build an inclusive and just employment ecosystem. Therefore, we prioritize individuals coming from the following communities: Refugee, Neurodivergent, Single Parent, Blind or Low Vision, Deaf or Hard of Hearing, Black, Hispanic, Asian, Military Veterans, the Elderly, the LGBTQ, and Justice Impacted individuals. This position is open to candidates who reside in and have the legal right to work in the country where the job is located. Company Name: DISH Job Description Department Summary Our Technicians deliver TV and Smart Home solutions to millions of customers. As a technician, we will train you to lead the charge for a world class customer experience, educating and connecting more Americans with every home you visit. You're the backbone of our organization and ensure an excellent customer experience. Our dedication to customer experience is paying off: in 2023, DISH earned the J.D. Power award for being #1 in Overall Customer Satisfaction for the sixth year in a row. Job Duties and Responsibilities What's in it for you? Guaranteed promotion after 6 months with a $1.00 per hour pay increase! Performance Incentives with the potential for up to $6,400 in your first year and $9,100 each following year! Paid training, paid time off & paid holidays 4-day work week with opportunities to work overtime Medical, Dental, Vision and Life Insurance packages and Health Savings Account Free DISH TV programming at a value of $114.99/month at your home, plus deeply discounted Sling TV and Boost Infinite phone plans 401(K) with company match & Employee stock purchasing program (ESPP) Tuition Reimbursement DISH-supplied van, tools, and uniforms Our greatest benefit is opportunity with over 400 of our current technician leadership starting as a technician. If you have grit and tenacity, you will grow quickly at DISH! Performance based promotions include an automatic 5% pay increase at level 2 and 10% at levels 3 and 4. What will you be doing? As a Field Technician, you will be representing DISH in customers' homes daily. We build our value by simplifying lives and using the DISH install to consult homeowners on their infinite smart home possibilities. Skills, Experience and Requirements All technicians must have: Aptitude to build rapport quickly. We want you to have a great time servicing our clients Ability to work at heights, including ladders up to 40 feet, and in all weather conditions Ability to lift over 70 lbs A valid driver's license in the state you are seeking employment with a driving record that meets DISH's safety standard Travel may be required Salary Range Compensation: $20.75/Hour Compensation and Benefits From versatile health perks to new career opportunities, check out our benefits on our careers website . Employment is contingent on successful completion of a pre-employment screen, to include a drug test and an acceptable driving record. Compensation listed may reflect a combination of hourly pay rate and location pay differential.

Job Summary: We are seeking a skilled Gas Pipe Technician to join our team. The ideal candidate will be responsible for installing, inspecting, testing, maintaining, and repairing gas lines and related equipment for residential and commercial clients. This role requires a strong understanding of gas systems, adherence to safety protocols, and excellent customer service skills. Key Responsibilities: Install, inspect, test, maintain, and repair gas lines, gas appliances, and related equipment. Check for gas leaks and troubleshoot problems related to gas appliances and equipment. Ensure that gas installations comply with building codes and safety regulations. Provide recommendations to customers regarding the use, operation, and maintenance of gas equipment and appliances. Maintain accurate records of work performed and equipment status. Collaborate with team members and other trades to ensure seamless service delivery. Stay updated with industry developments and best practices related to gas systems. Qualifications: 3+ years experience in installing, inspecting, testing, maintaining, and repairing gas lines and related equipment. Knowledge of building codes and safety regulations related to gas installations. Strong analytical and problem-solving skills. Ability to work independently and as part of a team. Excellent verbal and written communication skills. Physical ability to lift and move heavy equipment and work in confined spaces. Flexibility to work evenings and weekends as needed. Benefits Accrued PTO at 1 hour for every 40 hours worked 40 hours of vacation at 3 years and 80 hours at 5 years 7 Paid Holidays Medical/Dental/Vision Health Savings Account 401k with company 100% company match up to 3% and 50% match up to 5% Prizes and giveaways Fully stocked break room Ongoing Training Onsite Gym Working for a company that values the employees #SEAP Pay Range$25-$45 USD About Seatown: Seatown Electric Plumbing Heating and Air is proud to serve residents throughout Seattle and surrounding areas. We have a great reputation that keeps our customers coming back time and time again. We pride ourselves not only on providing great service for our customers, but our employees as well. We take care of all the employees like family. Everyone has room for growth, and everyone has a voice. Our company culture is something that any of our employees would say is like no other in Washington! We are an equal-opportunity employer committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic outlined by federal, state, or local laws. Privacy Policy

Applied Scientist - Global Operations Data Science We exist to wow our customers. We know we're doing the right thing when we hear our customers say, “How did we ever live without Coupang?” Born out of an obsession to make shopping, eating, and living easier than ever, we're collectively disrupting the multi-billion-dollar e-commerce industry from the ground up. We are one of the fastest-growing e-commerce companies that established an unparalleled reputation for being a dominant and reliable force in South Korean commerce. We are proud to have the best of both worlds - a startup culture with the resources of a large global public company. This fuels us to continue our growth and launch new services at the speed we have been since our inception. We are all entrepreneurial surrounded by opportunities to drive new initiatives and innovations. At our core, we are bold and ambitious people that like to get our hands dirty and make a hands-on impact. At Coupang, you will see yourself, your colleagues, your team, and the company grow every day. Our mission to build the future of commerce is real. We push the boundaries of what's possible to solve problems and break traditional tradeoffs. Join Coupang now to create an epic experience in this always-on, high-tech, and hyper-connected world. The Global Operation Tech (GOT) organization is responsible for the systems that enable Coupang to reliably deliver to customers within hours of orders being placed. GOT is on a mission to innovate logistics by building an efficient delivery network at breakthrough scale and speeds. As a Senior Staff Data Scientist in GOT, you will leverage advanced algorithms to improve Coupang's customer experience by ensuring ultra-fast deliveries are on time even during the busiest times of the year. We are looking for a Scientist that can drive the direction of technology across multiple teams, leverage deep industry knowledge and use statistical and machine learning techniques to bring value to customers. The ideal candidates are pragmatic, resourceful, and embrace challenges that are seemingly impossible. The ideal candidates also have rich industry experience and a track record of delivering highly impactful projects. Basic Qualifications Masters degree in a quantitative discipline: statistics, operations research, computer science, informatics, engineering, applied mathematics, economics or equivalent experience. 10+ years of experience in solving complex problems in the area of operations research and developing strategies for large-scale supply chain, transportation and logistic networks. Perform quantitative, economic, and numerical analysis of the performance of large-scale systems under uncertainty using statistical and optimization tools such as Python, R and Xpress/Gurobi/CPLEX/etc to determine optimal and heuristic solution strategies for optimization problems. Apply theories of mathematical optimization, including linear programming, combinatorial optimization, integer programming, dynamic programming, network flows and algorithms to design optimal or near optimal solution methodologies to be used by in-house decision support tools and software. Excellent written and verbal communication skills while addressing both technical and business people; ability to speak at a level appropriate for the audience. The ideal candidate should be able to present business cases, and document models, analyses, and results to influence important decisions Proven ability to work effectively in a cross-functional team. Preferred Qualifications PhD degree in a quantitative discipline: statistics, operations research, computer science, informatics, engineering, applied mathematics, economics, etc. 10+ years of hands-on experience applying theoretical models in an applied environment. Experience in supply chains, transportation and logistics, and network optimization models. Proficiency in model development, model validation and model implementation for large-scale applications Our compensation reflects the cost of labor across several US geographic markets. At Coupang, your base pay is one part of your total compensation. The base pay for this position ranges from $159,000/year in our lowest geographic market to $324,000/year in our highest geographic market. Pay is based on several factors including market location and may vary depending on job-related knowledge, skills, and experience Pay & Benefits General Description of All Benefits Medical/Dental/Vision/Life, AD&D insurance Flexible Spending Accounts (FSA) & Health Savings Account (HSA) Long-term/Short-term Disability Employee Assistance Program (EAP) program 401K Plan with Company Match 18-21 days of the Paid Time Off (PTO) a year based on the tenure 12 Public Holidays Paid Parental leave Pre-tax commuter benefits General Description of Other Compensation “Other Compensation” includes, but is not limited to, bonuses, equity, or other forms of compensation that would be offered to the hired applicant in addition to their established salary range or wage scale. Coupang is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to actual or perceived race (including traits historically associated with race, including but not limited to hair texture and protective hair styles), color, religion, religious creed (including religious dress and grooming practices), sex or gender (including pregnancy, childbirth, breastfeeding, and medical conditions related to pregnancy, childbirth or breastfeeding), gender identity, gender expression, sexual orientation, ,ancestry, national origin (including language use restrictions), age (40 and over), physical or mental disability, medical condition, genetic information, HIV/AIDS or Hepatitis C status, family status (including but not limited to marital or domestic partnership status), military or veteran status, use of a trained dog guide or service animal, political activities or affiliations, ancestry, citizenship, family and medical leave status, status as a victim of any violent crime, or any other characteristic or class protected by the laws or regulations in the locations where we operate. Coupang is also committed to providing a safe work environment for its employees and its consumers. If you need assistance and/or a reasonable accommodation in the application of recruiting process due to a disability, please contact us at ************************ . Req #R0066088

Job Responsibilities: Administration of fleet maintenance, GPS and fuel card programs Administration of company cellular programs Administration of company portals and software licensing Key team member for large scale projects/implementations Processing monthly system updates Order and deploy company IT assets in conjunction with Sonepar IT Recurring monthly reporting and tasks Other duties as assigned Minimum Qualifications & Expectations: Strong communication and team skills Demonstrable competency with Windows and Office applications Willingness to improve technical skills and adapt to new technology Self-directed with the ability to complete projects/tasks on time Service Center operations and/or warehouse experience a plus Ability to follow detailed instructions Strong Organizational skills Physical Requirements and Work Environment: Office environment, mainly seated at a desk Standing and lifting (Up to 50lbs) computer equipment and paper. Usual 40-hour work-week Monday through Friday however based on business needs evening and weekend hours may occasionally be required Requires regular and reliable on-site attendance This job description is a general description of essential job functions. It is not intended as an employment contract nor is it intended to describe all duties someone in this position may perform. North Coast Electric Company is an Equal Employment Opportunity Affirmative Action Employer. All decisions pertaining to hiring, transfers and promotions will be made regardless of gender, age, race, or any other protected classification.

Main Responsibilities: Responsible to inspect, measure, and restore out of tolerance conditions on all customer products. This may require use of gaging, hand tools, and air/electric tools. Maintain general shop cleanliness by adhering to safety, security and cleanliness standards. Interface and work closely with other colleagues on a daily basis as part of a team. Must be willing and able to perform all duties in the shop and or on-site at various locations Repair and verify all areas of the propeller based on using approved procedures. Capable of learning how to use oxy/acetylene torch equipment for heating and cutting operations. Perform support activities to ensure successful, repair and modification of propulsion systems. Operate overhead bridge & jib cranes for moving and positioning equipment and tooling. Perform detailed measurements using standard and precision measurement tooling such as micrometer, veneers, and various inspection gages. Accountabilities: Comply and follow all safety and company policies. Follow the direction of their Lead and Senior Leads and complete assigned work using tools and blueprints. Follow company or customer work instructions. Meet company and customer quality requirements. Development Responsibilities: Work as a team member to complete assigned tasks and develop ways to seek continual improvements Show the ability to be to work on time and consistently. Experience: Basic knowledge of hand and air tools Understanding of basic assembly skills Must be able to occasionally lift and/or move up to 75 pounds in weight Must be authorized to work in the U.S. without sponsorship. Must be able to obtain and maintain a security clearance Willing to travel as needed Professional Skills: Knowledge and skill in using computer software, including Excel, MS Word and PowerPoint Interpersonal and communication skills Authorities: Verify and understand the data taken Education: High School Diploma, GED or equivalent

Utility Technician/Dishwasher Department: Culinary Services/Food and Beverage Schedule: Varied (Full Time)/PM Pay: $20-$22 hourly/$2000 Retention Bonus! Who we are: Nestled at the base of Cougar Mountain is a senior living community in Issaquah, Washington unlike any other in the East Seattle area: Timber Ridge at Talus. When our community of well-traveled, outdoor-loving seniors aren't visiting other parts of the world, you'll find them socializing over dinner, hiking a nearby trail or just enjoying the spectacular views. As the area's first Silver LEED-certified Life Plan Community, our campus and natural setting reflects our residents' love of the Pacific Northwest. You won't find our unique combination of an all-inclusive lifestyle, superior hospitality, and beautiful location anywhere else. We are currently seeking an experienced Prep Cook/Dishwasher to work in our fine dining space. If you're looking for a different perspective on senior living and the food industry come join us today! You will enjoy: Medical, Dental, and Vision Insurance Now Offering DailyPay! Life and disability insurance 401(k) with company match Health Savings Account & Flexible Savings Account Employee assistance program PTO and eight paid holidays Pet insurance and employee discounts (including wireless plan and retail discounts) Tuition reimbursement Free Lyft rides if needed, to and from the Issaquah Transit Center. Free Underground parking Free meals Your personal and professional growth is important to us, so we provide continual professional training and career advancement opportunities. You will enjoy being part of a great team in a fun, engaging work environment! Who you are: Ability to communicate effectively and perform simple arithmetic. A minimum of one year experience as a Prep Cook with Dishwasher responsibilities in a hotel, restaurant, club, or similar institution. Ability to plan and organize work, to interpret instructions, recipes, specifications, and standards. Knowledge of kitchen equipment operations and maintenance. Food Handlers certification Basic understanding of English. General Summary: The Utility technician/Dishwasher performs several kitchen activities including pot washing, dishwashing, general cleaning duties and storing food and non-food supplies. Essential Job Duties: Maintains assigned workstation in a safe and sanitary condition. Maintains acceptable standards of personal hygiene and complies with department dress code. Attends in-service training and education sessions, as assigned. Performs specific work duties and responsibilities as assigned by supervisor. PHYSICAL REQUIREMENTS/WORKING CONDITIONS: Works indoors; must be able to stand/walk for 100% of the workday; must be able to lift and carry up to 50 lbs. independently; must be able to push and pull bus carts and tray carts weighing up to 100 lbs. independently; must be able to bend, stoop, reach, and balance frequently throughout the workday. Must be able to perform sweeping/mopping functions with ease. May be exposed to quick variance of hot and cold temperatures from ovens and freezers. May be exposed to industrial cleaning chemicals and to hot water temperatures regularly.

Hi, I hope you are doing good. I have a job opportunity related to your profile with one of our client, please find below Job Description for your review. If you are interested and available for the following position then please send your updated resume in word format along with your contact details to discuss further. Note: Client is willing to Provide the Re-location Assistance. Role: Technology Lead - Java/J2EE/Microservices Duration: Full TIme Location: Tukwila, WA Qualifications Basic • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. At least 4 years of experience in IT. Preferred At least 2 years of hands-on Software Development experience in Java/J2EE platform • At least 1 year of experience working in Micro Services based architecture. • Knowledge in Pivotal Cloud Foundry (PCF), No SQL (MongoDB) is a plus • Knowledge on at least one Relational Databases and ORM technologies • Experience in designing and developing web/Data Warehouse applications. • Good working knowledge of OO concepts, Design Patterns, UML. • Experience in working in Agile and Iterative Development Methodologies • Experience with continuous integration and build tools such as Ant, Maven, Jenkins, etc. • Experience with Red hat Linux, Unix or Windows operating systems • Experience with application performance tuning, debugging and troubleshooting • Experience in working with Geo-diversified teams • Excellent Oral and Written communication skills, Customer Interfacing Skills and Documentation Skills • Ability to communicate complex ideas to technical and non-technical audience • Participate & drive requirements discussion with end-users/customers • Guide the development team • Document requirements • Develop UI wireframes • Design and Development of system • Create Test Plans • Perform Functional Testing including regression testing • Prepare build and deployments scripts • Deployment, Implementation and Post-production support • At least 2 years of experience in software development life cycle. • Analytical skills • Experience and desire to work in a Global delivery environment Qualifications • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. Additional Information All your information will be kept confidential according to EEO guidelines.

About The Navys Advanced Electronics / Computer Field (AECF) offers extensive training in electronics, computer systems, radar, communications, and weapons fire control systems, including the Navys advanced missile systems and Aegis radar. These technicians are essential to the ships Combat Systems department, ensuring readiness for combat operations across the fleet. Responsibilities As an Electronics Technician (ET) or Fire Controlman (FC), you may: Maintain and repair radar, communication, and navigation equipment. Operate, maintain, and repair fire control radars, mainframe computers, large screen displays, LANs, weapon control consoles, and automatic gun systems. Troubleshoot and repair electro-mechanical systems used in weapons systems. Support combat systems readiness aboard aircraft carriers, Aegis cruisers, and other surface ships. Work Environment ETs and FCs serve on fleet units worldwide and at shore-based repair facilities. Expect assignments aboard ships, at remote stations, and in technical repair shops. Work is highly technical, requiring precision and teamwork. Training & Advancement Apprentice Technical Training Great Lakes, IL (11 weeks) FC Strand Great Lakes, IL (16 weeks) ET Strand Great Lakes, IL (22 weeks) Training covers electronics theory, radar systems, communications suites, missile and gun system ballistics, troubleshooting, and fiber optics. After A School, technicians may attend advanced C Schools. College credits are often available for Navy training. Education Opportunities Navy College Program & Tuition Assistance Post-9/11 GI Bill College credits via the American Council on Education Industry-recognized certifications through Navy COOL Department of Labor apprenticeships via USMAP Qualifications & Requirements U.S. citizen, eligible for security clearance Normal hearing and color perception Strong aptitude in math, computing, and electronics Ability to work as part of a team and perform detailed technical work Pay & Benefits Competitive salary Enlistment and re-enlistment bonuses Free health insurance & housing Retirement plan Paid training Required qualifications: 18 years or older Legally authorized to work in the United States RequiredPreferredJob Industries Government & Military

Main Responsibilities: * Responsible to inspect, measure, and restore out of tolerance conditions on all customer products. This may require use of gaging, hand tools, and air/electric tools. * Maintain general shop cleanliness by adhering to safety, security and cleanliness standards. * Interface and work closely with other colleagues on a daily basis as part of a team. * Must be willing and able to perform all duties in the shop and or on-site at various locations * Repair and verify all areas of the propeller based on using approved procedures. * Capable of learning how to use oxy/acetylene torch equipment for heating and cutting operations. * Perform support activities to ensure successful, repair and modification of propulsion systems. * Operate overhead bridge & jib cranes for moving and positioning equipment and tooling. * Perform detailed measurements using standard and precision measurement tooling such as micrometer, veneers, and various inspection gages. Accountabilities: * Comply and follow all safety and company policies. * Follow the direction of their Lead and Senior Leads and complete assigned work using tools and blueprints. * Follow company or customer work instructions. * Meet company and customer quality requirements. Development Responsibilities: * Work as a team member to complete assigned tasks and develop ways to seek continual improvements * Show the ability to be to work on time and consistently. Experience: * Basic knowledge of hand and air tools * Understanding of basic assembly skills * Must be able to occasionally lift and/or move up to 75 pounds in weight * Must be authorized to work in the U.S. without sponsorship. * Must be able to obtain and maintain a security clearance * Willing to travel as needed Professional Skills: * Knowledge and skill in using computer software, including Excel, MS Word and PowerPoint * Interpersonal and communication skills Authorities: * Verify and understand the data taken Education: * High School Diploma, GED or equivalent