Technician jobs in Worcester, MA - 3,024 jobs

BluSky Restoration wants to hire YOU as a full-time Restoration Technician for our New England office, located in Woburn, MA. This position has a starting pay of up to $25 an hour, depending on experience! Benefits Include: Medical, Dental, and Vision Insurance 401K Plan with guaranteed match Paid Time Off and Holidays Life & Disability Insurance Employee Assistance Programs Health and Wellness Programs BluSky apparel What does a Restoration Technician do? They fix broken buildings! Whether it's a broken pipe or a major storm, when people have an emergency, they turn to us. That's where YOU come in - you'll respond to emergencies and restore the lives of our customers. At BluSky, our core values are Excellence, Teamwork, Integrity, Innovation, Empathy, Passion, and, most of all, FUN! We are a culture of family. Previous experience and IIRC certifications are a plus but not required. We will help you obtain the training and development you need. Brief Description: The Restoration Technician is a first responder on property loss situations and helps mitigate damage in residential and commercial structures. Technicians are responsible for water damage mitigation, structural board-up and security, on-location cleaning, microbial remediation, content pack-outs, content processing/deodorization, content storage, and handling. Responsibilities: Water extraction and mitigation Fire and smoke cleaning and restoration Microbial remediation Vandalism, crime scene, and biohazard clean-up Demolition (Demo Day!) Field management and supervision of all temporary labor personnel Provide the highest level of customer service with empathy All other duties or projects as assigned Qualifications: Possess and maintain a valid driver's license Successfully pass a national criminal background check and motor vehicle report background check Successfully pass a pre-employment drug screening Ability to be on-call 24 hours a day 1 year of restoration industry or maintenance experience preferred WORK ENVIRONMENT AND PHYSICAL JOB DEMANDS: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. The noise level in the work environment is usually quiet. The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. The employee must occasionally lift and/or move up to 25 pounds. While performing the duties of this job, the employee is regularly required to sit, use hands and fingers, reach with hands and arms, talk, and hear. The employee is required to move and walk around the office regularly. TRAVEL: Occasional travel. (Less than 25% of the time.) Some out-of-area and overnight travel may be expected for training or meetings. COMPENSATION: BluSky offers a competitive base pay between $20 - $25 per hour and a comprehensive benefits package that includes: a matching 401(k) plan, health insurance (medical, dental, and vision), paid time off, paid holidays, disability, equipment appropriate to the position (i.e., laptop, smartphone, etc.), and corporate apparel allowance. EEOC: BluSky is dedicated to the principles of equal employment opportunity. BluSky prohibits unlawful discrimination against applicants or employees on the basis of age 40 or over, race, sex, color, religion, national origin, disability, genetic information, sexual orientation, or any other applicable status protected by Federal, State, or local law. It is and will continue to be the policy of BluSky that all persons are entitled to equal employment opportunity based on their individual qualifications, performance, and potential without regard for any protected status, as required by state and federal law.

Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. We currently have an Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on ST products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. Responsibilities Installs intrusion, fire, CCTV, and access control security systems. Run electrical wiring in attics, crawl spaces, and other confined spaces, which can include drilling, trenching and aerial runs. Complete all wiring, connections, and equipment installations ensuring that security systems are complete and satisfy customer and contractual requirements. Assists and interfaces with the Installation Team Lead or Project Manager regarding on-site scheduling of work activities and timely delivery of equipment. Conducts tests to ensure all newly installed systems and component devices are operational. Troubleshoots new system installations to ensure proper functioning and to ensure system meets local, county, state, or federal codes; legal and/or insurance requirements. Presents a professional image both in personal and vehicle appearance. Performs work assignments in a safe manner and within specified cost limits. Promotes, builds, and maintains good customer relations and assists with contract retention. Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements. Keeps abreast of changes and new developments in products and technology. Attends and completes training programs as requested Minimum Requirements MUST HOLD a minimum of 1-2 years of experience installing and/or servicing intrusion, fire alarm, access control, and CCTV security systems. High School Diploma or equivalent Vocational/Technical Degree in electrical, security, or computer systems preferred NICET Certification preferred IP Video and IT experience preferred Climb ladders that extend up to 24 ft. in height Carry items up to 75 pounds Ability to work on-call on a rotational basis covering after hours & weekend emergency calls. A valid state driver's license, without restrictions, is required. Securitas offers comprehensive benefits including: Highly competitive salary Company Vehicle Company Cell Phone Opportunity for annual merit pay increases. Paid company training Medical, Dental, Vision, and Life Insurance Company Paid Short Term and Long-Term Disability 401K with 60% Match up to 6% of salary Paid vacation, holiday and sick time Educational Assistance Exceptional growth opportunities Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

EG America is one of the fastest-growing convenience store retailers in the United States, committed to becoming America's #1 ‘one-stop' destination. The business has an established pedigree of delivering excellent fuel, grocery and merchandise, and food service. Headquartered in Westborough, Massachusetts, our Company has grown to over 1,500+ locations across the United States employing over 18,000 team members. You can find us operating under the following store banners: Certified Oil, Cumberland Farms, Fastrac, Kwik Shop, Loaf N Jug, Minit Mart, Sprint Food Stores, Tom Thumb, Turkey Hill, and Quik Stop. Our headquarters in Westborough, MA is home to our Store Support Center, Company Warehouse, and Culinary Center. What We Offer: Competitive Wages Work today, get paid tomorrow through our earned wage access program* Paid Time Off Medical/Health/Dental Coverage 401K with Company Match Team Member Discounts Tuition Reimbursement Employee Assistance Program Health Savings Account Company Spirit Days Employee recognition and awards And much more! Position Summary: Processes orders for service parts & equipment and maintains stock levels on field technician's service trucks. "Customers" include Store Managers, Field Technicians, and Shop Technicians. Provides excellent customer service by using parts knowledge to advise alternatives & ensure order accuracy, as well as providing proactive order status updates. Coordinates parts delivery driver routes to optimize deliveries. Responsibilities: • Receive, interprets, and process orders for parts, supplies, and equipment • Determines parts sourcing (internal/supplier) and most efficient delivery method • Communicates with customer regarding status and notifies upon delivery • Proactively restocks trucks, reviews allocations to ensure stock levels are maintained • Coordinates delivery driver routes • Receives, unpacks, and restocks items in parts warehouse. Packs and ships parts orders. • Performs Cycle and Physical Inventory counts Working Relationships: Internal: Service Manager, Store Managers, Field and Shop Technicians, Delivery Driver, OEM Equipment manufacturers, Supply Vendors, Construction personnel Minimum Education: a high school diploma or its equivalent Preferred Education: Applicable trade School or Training program. Manufacturer's equipment certifications Minimum Experience: 2-4 years service parts experience, including usage of computer inventory management system Preferred Experience: 4+ years experience Field Service Parts, experience in hot/cold beverage and kitchen equipment Licenses/Certifications: Required Courses and Training Programs (if Applicable) Soft Skills: Customer service and communication skills; verbal and written Hours & Conditions: 9:30am - 6:00pm M-F ; Warehouse Conditions Driving Requirement: May occasionally assist with deliveries, must be approved to operate company vehicles Travel: Infrequent Physical: Can lift 50 lbs Grasping/Griping/fine manipulation. Pushing/pulling/Bending/kneeling/twisting/climbing on a regular basis. Carrying/setting/walking/standing and lifting above shoulder level on a regular basis. At EG America, it's important that our employees reflect the world we live in and the communities we serve. We celebrate our differences, so your unique background and skillset could bring a wonderful new perspective to our team. If you have a passion for delivering exceptional results, thrive in a fast-paced environment, and bring experience in business management or related areas, we'd love to meet you - even if you don't meet every single requirement. Consistent with Massachusetts Pay Transparency Law, we're sharing the base salary range for this position. Final pay within this range will be based on your skills, experience, and qualifications. Base pay represents just one part of our total rewards approach. We're proud to offer a variety of financial and non-financial benefits that invest in your overall growth, well-being, and career journey.

The department is responsible for ensuring the optimal management and availability of surgical supplies across the Operating Room (OR), Post-Anesthesia Care Unit (PACU), and Day Surgery. Key functions include monitoring inventory levels, restocking supplies, and adjusting par levels as needed to meet surgical demand. The team handles receiving, inspecting, and verifying orders, maintaining organization in storage areas, and building surgical case carts for both scheduled and emergent procedures. By serving as a liaison between the Surgical Processing Department and clinical staff, the department ensures efficient communication and delivery of instrumentation and materials to support surgical operations, all while adhering to strict departmental policies and procedures. Key Responsibilities: Monitor and maintain the inventory of surgical supplies for the OR, PACU, and Day Surgery, ensuring availability and initiating reorders according to par levels. Inspect, verify, and record incoming orders, addressing any errors or delays with supervisors or business managers as needed. Distribute, restock, and maintain inventory in storage areas and case carts, ensuring proper organization and adherence to packaging and expiration standards. Assemble and deliver surgical case carts based on surgeon preference sheets, ensuring integrity and timely delivery for both scheduled and emergent procedures. Serve as a liaison between the Surgical Processing Department (SPD) and the OR, facilitating the flow of surgical supplies and communication of urgent needs. Follow departmental policies for transporting and restocking sterilized surgical instrumentation, using electronic tracking systems and responding to inquiries as appropriate. Minimum Qualifications Education: High school diploma/GED required. Experience: 1 Year of relatable experience. Strong customer service and strong communication skills. Strong computer and problem solving skills as well as the ability to work independently and as a team player. The ability to be flexible; willing and able to change assignments due to needs of the department. Demonstrated basic record keeping skill, as well as the ability to read and write legibly. The posted pay range is Boston Children's reasonable and good-faith expectation for this pay at the time of posting. Any base pay offer provided depends on skills, experience, education, certifications, and a variety of other job-related factors. Base pay is one part of a comprehensive benefits package that includes flexible schedules, affordable health, vision and dental insurance, child care and student loan subsidies, generous levels of time off, 403(b) Retirement Savings plan, Pension, Tuition and certain License and Certification Reimbursement, cell phone plan discounts and discounted rates on T-passes. Experience the benefits of passion and teamwork.

A leading biotechnology firm is seeking a Senior Director for AI Product Management. The role focuses on building AI products to enhance operations and customer experience. Key responsibilities include defining AI strategies, managing product roadmaps, and leading product lifecycles. The ideal candidate will have over 12 years of experience, including in the pharmaceutical industry, and a strong proficiency in AI/ML product management. This position offers a competitive salary and hybrid working options. #J-18808-Ljbffr

Cumberland Farms is a member of the EG America family of brands. EG America is one of the fastest-growing convenience store retailers in the United States, committed to becoming America's #1 ‘one-stop' destination. The business has an established pedigree of delivering excellent fuel, grocery and merchandise, and food service. Headquartered in Westborough, Massachusetts, our Company has grown to over 1,500+ locations across the United States employing over 18,000 team members. You can find us operating under the following store banners: Certified Oil, Cumberland Farms, Fastrac, Kwik Shop, Loaf N Jug, Minit Mart, Sprint Food Stores, Tom Thumb, Turkey Hill, and Quik Stop. Our headquarters in Westborough, MA is home to our Store Support Center, Company Warehouse, and Culinary Center. What We Offer: Take home vehicle All tools provided Work-life balance On-call stipends Reasonable OT expectations Training & 3 year pay raises for entry level / inexperienced technicians Competitive wages Work today, get paid tomorrow through our earned wage access program* Paid Time Off Medical/Health/Dental Coverage 401K with Company Match Team Member Discounts Tuition Reimbursement Employee Assistance Program Health Savings Account Company Spirit Days Employee recognition and awards And much more! Position Summary: The General Maintenance Technician is responsible for performing a variety of maintenance tasks to ensure the safety, functionality, and appearance of facilities and equipment. Key responsibilities include troubleshooting, repairs, and preventive maintenance in areas such as plumbing, electrical, HVAC, carpentry, and general building systems. Responsibilities: 1. Troubleshoot and independently repair building systems, including plumbing, electrical, HVAC, and general mechanical components. 2. Perform preventive maintenance tasks on complex systems and equipment to ensure optimal performance and longevity. 3. Assist in training and mentoring entry-level technicians by providing guidance on maintenance tasks and best practices. 4. Lead smaller maintenance projects, ensuring timely completion and adherence to quality standards. 5. Collaborate with vendors or contractors to coordinate repairs or installations, verifying work complies with company and industry standards. 6. Maintain an organized inventory of tools, replacement parts, and vehicle supplies, ensuring adequate stock for ongoing maintenance needs. 7. Assist with equipment upgrades or replacements and coordinate ordering of necessary parts or tools. 8. Conduct routine maintenance and inspections on the service vehicle, ensuring compliance with scheduled upkeep and company standards. 9. Adhere to workplace safety protocols, company policies, and industry regulations (e.g., OSHA, safety codes, building codes) while completing tasks. 10. Identify and promptly report safety hazards or compliance issues to the maintenance supervisor. 11. Perform other duties as assigned by the management team to support departmental objectives. Working Relationships: Work directly with Department teammates. Frequent communication with other departments or teams, and External Vendors. Minimum Education: High School or GED Preferred Education: Trade and Technical schools' certificate/diploma Minimum Experience: 3-5 years of related experience Preferred Experience: 5-7 years of related experience. Proficient knowledge of building systems, including HVAC, electrical, plumbing, mechanical, and safety systems Licenses/Certifications: Applicable Trade Licensure; Plumbing, Electrical, Carpentry Soft Skills: Communication Skills - Clearly convey information, listen actively, and ensure mutual understanding Teamwork & Collaboration - Working effectively with others to achieve common goals Problem-solving - Use critical thinking to analyze situations and implement effective solutions Adaptability - Stay flexible and open to change in a dynamic work environment Time Management - Prioritize tasks, meeting deadlines, and managing time efficiently Other Requirements: Travel: Travel is a must; you must be able to drive for extended periods as needed · A company vehicle is provided; they must maintain a clean driving record Hours & Conditions: Monday-Friday, 40 hours minimum, with participation in an on-call rotation, including holiday coverage Physical Requirements:· Must be able to work safely in confined spaces as required by the role Ability to regularly lift up to 10 pounds, frequently lift up to 25 pounds, and occasionally lift up to 80 pounds, using proper lifting techniques and equipment as needed Must be able to stand or walk for up to 8 hours per day Ability to perform physical tasks such as reaching overhead, bending, squatting, twisting, grasping, gripping, and performing repetitive movements Comfortable working in environments with varying temperatures, including cold and hot conditions, as required by the role The work environment usually has moderate noise levels typical of industrial or operational settings At EG America, it's important that our employees reflect the world we live in and the communities we serve. We celebrate our differences, so your unique background and skillset could bring a wonderful new perspective to our team. If you have a passion for delivering exceptional results, thrive in a fast-paced environment, and bring experience in business management or related areas, we'd love to meet you - even if you don't meet every single requirement. Consistent with Massachusetts Pay Transparency Law, we're sharing the base salary range for this position. Final pay within this range will be based on your skills, experience, and qualifications. Base pay represents just one part of our total rewards approach. We're proud to offer a variety of financial and non-financial benefits that invest in your overall growth, well-being, and career journey.

Vaxess is developing a pipeline of next-generation therapeutics on our novel micro-array patch platform. With only five minutes of wear-time on the skin, the Vaxess' patch combines room temperature stability with simplified application to dramatically alter the way that drugs are delivered. Vaxess is committed to enabling products that are not only more effective, but also more accessible to patients around the world. Responsibilities Perform cGMP manufacturing operations according to documented procedures or batch records Operate automated manufacturing equipment and record relevant in-process data. Complete production and testing records following Good Documentation Practices (GDP) Handle, assemble, and visually inspect products, including use of a microscope, automated inspection systems, or other optical systems. Contribute to root cause analysis (RCA) and help contribute to manufacturing investigations Support manufacturing related R&D efforts as needed Perform other assigned duties related to manufacturing, quality control, and/or facility operations. Qualifications 2 + years' relevant experience working in regulated environments in medical device or biopharmaceutical industries; experience working in a clean room is preferred High school diploma minimal, associate's degree or trade certifications preferred Good written and verbal communication skills, attention to detail, and a demonstrated ability to work effectively within a team Ability to stand or sit for a full shift on a manufacturing line Entrepreneurial spirit and drive to positively impact global human health At Vaxess, we're bringing together exceptional talent to drive our product development forward. We value collaboration, curiosity, and a dynamic work environment. To apply, please submit your CV/resume to ****************** .

About the company Albertsons Companies is at the forefront of the revolution in retail. With a fixation on raising the bar with innovation and building belonging through our culture, our team is rallying our company around a unique purpose : to create joy around each table and inspire a healthier tomorrow for every community. Albertsons Companies is one of the largest food and drug retailers in the United States, with over 2,200 stores in 34 states and the District of Columbia. Our well-known banners include Albertsons, Safeway, Vons, Jewel-Osco, Shaw's, Acme, Tom Thumb, Randalls, United Supermarkets, Pavilions, Star Market, Haggen, Carrs, Kings Food Markets, and Balducci's Food Lovers Market. We support our stores with 22 distribution centers and 19 manufacturing plants. Placing a premium on adaptability, safety and family well-being, our work model, Presence with a Purpose, offers a hybrid work environment between remote work and office time. A one-size-fits-all approach does not apply to everyone, and teams are empowered to make decisions best for them. Bring your flavor Building the future of food and well-being starts with you. Join our team and bring your best self to the table. What you will be doing As a Refrigeration Technician, you will be responsible for monitoring building equipment for safety purposes and repairs. Troubleshooting refrigeration, HVAC, mechanical, and electrical problems, performing repairs, documenting solutions, and making recommendations for further action. Main Responsibilities Make daily mechanical checks on equipment in the Mechanical Room, Roof, HVAC, EMS systems, refrigerated cases, and walk-ins. etc. Maintain all refrigeration, HVAC, EMS systems, electrical, and mechanical systems, and make necessary repairs. Performs preventative maintenance tasks, leak checks, inspections, and new equipment installations. Will record required information and maintain compliance forms and all other documentation in both paper form at the store and electronic in Corrigo and Refrigerant tracking System, based on the specific task. Monitors preventive maintenance and construction project work done by outside contractors and notifies Area Refrigeration Manager of issues or problems with outside contractors. Responsible for troubleshooting refrigeration, HVAC, mechanical, and electrical problems, performing repairs, documenting solutions, and recommending further action. Maintains a high technical level in troubleshooting and maintenance of mechanical and electrical equipment. Manage communications for service calls: Ensure timely responses as required. Maintain current license, inspection, permit, and certificate requirements to meet all state and local codes. Operates EMS building controls and automation systems: Fine-tune operating parameters, adjust set points and schedules, fully understand and modify building control sequences, and operate the EMS/BMS systems. and schedules. Fully understand and modify building control sequences and operate the EMS / BMS systems. Perform a variety of administrative tasks such as ordering materials and writing purchase orders, and data entry for work reports and refrigerant leak reports Perform all duties in a timely, efficient, & professional manner. Maintain a neat, clean, and safe work area in the mechanical room, roof, and service vehicle. We believe the successful candidate has these qualifications and experience Must possess an EPA Section 608 Universal Certification. Must possess a valid driver's license. Excellent verbal and written communication skills related to technical aspects when communicating with customers at the store and division level. Must be willing to work overtime on weekends, holidays, and after-hours when on call High School diploma or equivalent. Graduate of building-related vocational-technical programs are preferred. Able to perform duties with a high degree of accuracy and care to avoid mechanical breakdowns. Able to respond to direct and radio requests as soon as possible. Wear required Personal Protective Equipment as required, including arc flash and safety glasses. Must be computer literate and proficient in web-based work order platforms. Ability to read and comprehend manuals, prints, and work orders. Knowledge of tools and equipment maintenance. Ability to work independently. Physical Environment Most work is performed in both indoor and outdoor work environments. Ability to perform manual labor. Stooping, bending, twisting, lifting, and reaching are required in the completion of job duties Pay Transparency: Starting rates will be no less than the local minimum wage and may vary based on things like location, experience, qualifications, and the terms of any applicable collective bargaining agreement. Candidates with unique qualifications may be considered for compensation above this range. Dependent on length of service, hours worked, any applicable collective bargaining agreement and/or Company policy, benefits may include medical, dental, vision, disability and life insurance, sick pay, PTO/Vacation pay, paid holidays and retirement benefits (pension and/or 401(k) eligibility). This is an entry level position with advancement opportunity. Applications are accepted on an on-going basis.

Job Title: Facilities Technician Employment Type: 6-month contract-to-hire Compensation: $25/hr-$30/hr Schedule: Mon-Fri 7:00 AM-3:30 PM Insight Global is seeking a dedicated Facilities Technician on behalf of a local aerogels manufacturing client of theirs. This client delivers innovative aerogel technology focused on energy efficiency, safety, and sustainability. A hands-on professional responsible for maintaining building structures, mechanical systems, and process equipment across two facilities, this role also involves coordinating external vendors and liaising with landlords for shared services. Key Responsibilities Facility & Regulatory Systems Act as point of contact for external service providers (HVAC, electrical, plumbing, air compressors, dust collectors, emergency suppression systems). Manage vendors for maintenance, inspections, repairs, and regulatory compliance. Preventive & Corrective Maintenance Collaborate with area managers to maintain: Vacuum pumps (rebuilds) Filter changes/cleaning (air, dust collector) Lighting (bulbs, fixtures) Pneumatic lines (installation, adjustment) Painting, building repairs Water‑jet cutter, splitter maintenance Belt adjustments/replacement Re‑placement of electric drops; forklift/scissor lift operations Emergency systems upkeep Landlord Coordination Schedule snow removal, landscaping, parking lot repairs, major construction through landlord contacts. Required Skills & Qualifications High School Diploma or equivalent; technical degree or professional certifications in HVAC, electrical, plumbing a plus 3+ years of experience in industrial or facility maintenance Proficiency with: HVAC, electrical systems Plumbing repairs Air compressors, dust collectors Emergency fire suppression systems Heavy moving equipment (forklifts, lifts) Mechanical aptitude with tooling (hand/power) Skill in reading technical drawings, schematics, blueprints Strong vendor coordination and project management capabilities Excellent problem-solving, communication, and collaboration skills Detail-oriented and self-driven Willingness to work overtime or weekends during emergencies OSHA 10 Certification Forklift Certification Physical Requirements Ability to lift up to 50 lb+, climb ladders, bend, reach, kneel, and handle heavy machinery Apply today!

Job Title: Field Service Technician Coverage area: Greater Boston area Department: Service (Operations) Reports to: Service Manager FLSA Status: Hourly, Non - Exempt SUMMARY: The Field Service Technician provides customer service in person and/or by telephone to customers in and around the greater Boston area. Technicians will also help fulfill the needs of the maintenance schedule when needed by performing preventative maintenance on parking access, as well as software and/or hardware. Works with upper-level support to troubleshoot/setup/configure car access systems to include LAN (Local Area Networks). Effectively understands and troubleshoots basic setup of credit card configuration within the PARCS (parking access & revenue control system) network. ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform field repairs on parking access system and building access systems, software and/or hardware related Troubleshoot and correct problems on devices/equipment, down to board level, low voltage Correct/fixes; minor to complex software issues on parking/access systems Understand and troubleshoot the entire setup of a SKIDATA network (LAN) Properly identifies all network devices on a LAN (router, modem, switch etc.) Can properly use handheld devices like, but not limited to, multi meter, Network tester, toner, etc. Understand basic relay logic Works with upper-level support to setup/configure firewall, router, and other network devices Provides effective customer service, to internal and external customers Properly identifies when higher level support is needed. Work closely with peers and support team to ensure customer expectations are met Effectively execute troubleshooting instructions from higher level support Properly maintain vehicle status and maintenance, as required Properly maintains his/her inventory levels, by properly transacting in ERP (SNOW) system Communicates effectively with service coordinator, advisors, and service management team Responsible for transactions for assigned work orders (WOs) in ERP system on a per WO basis (parts and labor), also to include maintenance checklist, as required by existing processes Perform monthly preventative maintenance - scheduled inspection, cleaning, lubricating, and adjusting of the equipment Other duties, as assigned QUALIFICATIONS: This is an experienced position within the Service Department. To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required: Must be at least 21 years old, with a valid driver's license; have and maintain a driving record clean of any major or numerous violations Must be able to drive to field / customer locations to perform field work Working knowledge of Windows Server 2008/2012/2016, SQL, Windows OS 7, 10 and above, and network firewall configurations Must possess aptitude to learn new technologies The ability to work independently all while keeping others informed of your processes and progress via multiple avenues - including ERP System, email, and/or phone Proficiency in Microsoft Project, Excel, and PowerPoint Must be able to complete SKIDATA technical certified training courses - within 24 months; or has completed required certified courses in the technical career track. Specific product/equipment and software training supplied by SKIDATA EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED) or equivalent and two (2) years of training/experience in related field required, or equivalent combination of education and experience. Good skills in the use of hand tools required - experience using ERP software a plus. CERTIFICATES, LICENSES, REGISTRATIONS: Valid Driver's License, in state of residence. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to drive motor vehicle; sit; stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop; kneel; crouch; or crawl; and talk; or hear. The employee must frequently lift and/or move more than 50 pounds. Specific vision abilities required by this job include close vision, distance vision, and depth perception; standing for long periods of time; climbing ladders, stairs, ramps; handling and assembling small parts, use of a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment including oscilloscopes, ammeters, and computers/digital equipment. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and/or automobiles. The employee is occasionally exposed to wet and/or humid conditions; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; risk of electrical shock. The noise level in the work environment is usually moderate to occasionally loud. TRAVEL: There may be occasional travel outside of the employee's regular region; this travel may be by airplane or vehicle and will be planned with as much advanced notice as possible. SCHEDULE: Monday through Friday - Available 8am - 5pm. Saturday and Sundays - Possible with advance notification. The general hours of the position are Monday through Friday (8 a.m. to 5 p.m.); however, the expectations are that you be flexible to work as the needs of the business require. This may require occasional overtime; working on Saturday/weekends; and/or before or after the hours of 8 a.m. to 5 p.m. Technicians are required to be on an on-call rotation for one week per month. Supervisor will give as much advance notice as possible and try to evenly distribute hours based on business needs among the employees with skills, knowledge and ability for the work that needs to be accomplished. SKIDATA Inc. is an equal opportunity employer. All qualified applicants for employment will be considered without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, status as an individual with a disability, veteran status, or any other basis protected by federal, state, or local law. EEO M / F / D / V

Engineering Technician - Medical Device R&D temp to perm Marlboro, MA Support engineers in the development and testing of single-use medical devices. This hands-on role involves working with Engineers testing prototypes, performing validation and system testing, and accurately documenting results in a regulated environment. Responsibilities Perform validation, strength, and system testing on medical devices Work with tubing and small mechanical components Set up and maintain test equipment; perform basic troubleshooting Document test results and communicate findings to engineers Support calibration and quality documentation requirements Qualifications Associate degree or equivalent hands-on experience 1+ year experience in technical, lab, R&D, or manufacturing role Strong mechanical aptitude and troubleshooting skills Ability to follow procedures and document work accurately Medical device or regulated environment experience preferred.

We are a growing, locally based company seeking skilled professionals to support production operations and equipment maintenance. This dual-role position involves operating manufacturing processes and performing mechanical maintenance to ensure the smooth operation of our systems and equipment. The job title and pay will be based on experience. Shift Schedule: Current: Monday-Friday, 8:00 AM to 4:30 PM Extended hours and/or night shifts may be required as production expands. Key Responsibilities: Process Operation (70% of Role) Operate and monitor machinery for manufacturing natural vitamin E and related products. Set up and adjust equipment conditions based on testing feedback. Monitor process parameters, such as flow rates, temperature, and pressure. Perform controlled shutdowns, cleaning, and basic repairs of equipment. Follow cGMP (current Good Manufacturing Practices) and food safety regulations. Document production activities, maintain records, and update process flow diagrams. Collaborate with team members to foster a productive and cooperative work environment. Packaging, Staging, and Warehousing (20% of role) Assist with packaging finished products according to specifications. Prepare and stage products for storage or shipment. Label, palletize, and wrap shipments to meet quality and safety standards. Move materials and finished products to appropriate warehouse locations. Maintain accurate inventory records and follow warehouse procedures. Mechanical Maintenance (10% of Role) Perform maintenance and minor repairs on production-related systems and equipment, including: Chillers Vacuum pumps Liquid sanitary process pumps Conduct routine inspections, adjustments, and cleaning of mechanical equipment. Recommend additional repairs or equipment upgrades as needed. Maintain inventory of parts and supplies, and assist with ordering. Operate forklifts (training and certification provided). Safety & Compliance Adhere to occupational safety and health regulations. Make recommendations to improve worker safety and operational efficiency. Required Qualifications: Education: High School Diploma or equivalent. Preferred: Associate or Bachelor's degree in a science-related field with 2+ years of production experience. OR completion of an approved technical training program (e.g., automotive or motorcycle repair, pump maintenance). Experience: At least 3 years of experience operating industrial equipment, preferably in a chemical, food, or related processing environment. Mechanical aptitude, with experience in pumps, chillers, and vacuum systems. Familiarity with chemical or food processing, printing press operation, or applied chemical/food engineering is highly desirable. cGMP Manufacturing Experience Skills: Ability to read engineering drawings and blueprints. Proficient in using hand and power tools. Basic computer skills, including Microsoft Office Suite (Word, Excel), Outlook, and other relevant programs. Effective verbal and written communication skills. Strong analytical and problem-solving abilities. Additional Requirements: Valid driver's license and dependable transportation. Ability to lift up to 50 lbs and work at various heights. Willingness to undergo a pre-employment background check, drug screening, and workplace physical. Preferred Qualifications: OSHA-related safety training. Previous experience in automotive or motorcycle repair, or familiarity with pumps and HVAC systems.

A popular coffee company in Boston is seeking a full-time Shift Leader to support the Store Manager in delivering exceptional customer service and managing business operations. The ideal candidate should have prior leadership experience and be able to inspire and motivate the team. Competitive salary, a fun work environment, and opportunities for professional development are offered. Applicants must be at least 16 years old and able to lift up to 70 pounds. #J-18808-Ljbffr

Our client a growing manufacturing facility in Billerica, MA is seeking an experienced Maintenance Mechanic to support day-to-day operations by maintaining production equipment, utilities, and the physical plant. This role is hands-on, fast-paced, and critical to ensuring equipment reliability and minimal downtime. Location: Billerica, MA Schedule: Monday-Friday, 6:00am-4:30pm or 5:00am-3:30pm Compensation: $62,400-$83,200 annually (DOE) Key Responsibilities: Maintain and repair electrical, mechanical, compressed gas, water, and refrigeration systems to ensure uninterrupted service. Troubleshoot, diagnose, and repair production machinery and support equipment. Perform routine and preventive maintenance on production equipment. Document maintenance activities, repairs, and equipment modifications. Disassemble equipment to identify faults and replace defective components. Coordinate activities of internal maintenance personnel and external vendors/contractors. Manage inventories of materials, tools, and replacement parts. Support facility layout changes and equipment installations. Collaborate with vendors, contractors, and utility providers. Maintain cleanliness and organization throughout maintenance areas. Qualifications Minimum of 5 years of mechanical, electrical, or industrial maintenance experience. Strong mechanical maintenance background within a manufacturing environment. Working knowledge of OSHA, EPA, and DEP regulations related to plant operations. Ability to read and interpret technical schematics and mechanical/electrical drawings. Experience in a CNC machine shop is a plus. Desired Skills and Experience Maintain and repair electrical, mechanical, compressed gas, water, and refrigeration systems to ensure uninterrupted service. Troubleshoot, diagnose, and repair production machinery and support equipment. Perform routine and preventive maintenance on production equipment. Document maintenance activities, repairs, and equipment modifications. Disassemble equipment to identify faults and replace defective components. Coordinate activities of internal maintenance personnel and external vendors/contractors. Manage inventories of materials, tools, and replacement parts. Support facility layout changes and equipment installations. Collaborate with vendors, contractors, and utility providers. Maintain cleanliness and organization throughout maintenance areas. All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, gender identity, gender expression, marital status, disability, medical condition, genetic information, pregnancy, or military or veteran status. We consider all qualified applicants, including those with criminal histories, in a manner consistent with state and local laws, including the California Fair Chance Act, City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, and Los Angeles County Fair Chance Ordinance. For unincorporated Los Angeles county, to the extent our customers require a background check for certain positions, the Company faces a significant risk to its business operations and business reputation unless a review of criminal history is conducted for those specific job positions.

Akkodis is seeking a Electronic Technician for a 12+ Contract position with a client located in Norwood, MA Pay Range: $20/hr - $26/hr (The rate may vary based on experience, education, geographic location, and other factors.) Position Responsibilities Assemble electronic components, subassemblies, and systems. Test and calibrate electronic assemblies using test equipment and standardized procedures. Perform final inspection and prepare electronic products prior to shipment to customers worldwide. Test, debug, and repair products returned products to meet customer needs. Ensure that work area and equipment are maintained in a clean, safe, and orderly condition and established company policies and procedures are adhered to. Keep workstation, tools, and equipment in a neat and orderly manner. Understand and comply with all company safety rules and regulations. Minimum Qualifications: Associates Degree in Electrical Engineering, bachelor's degree in engineering technology, or equivalent military training / experience. 2+ years' electronic/manufacturing technician experience. 2+ years' experience with hand assembly / soldering and component replacement on surface mount and through-hole PCBs. 2+ years' experience troubleshooting and repairing electronic assemblies. Experience in diagnosing and repairing faults in analog and digital PCBAs using multimeters, oscilloscopes, logic analyzers, and other diagnostic tools. Experience reading and interpreting schematics, wiring diagrams, and technical manuals. Experience with surface-mount and through-hole soldering and desoldering. Experience using software-based diagnostic tools and firmware flashing utilities. Ability to read and interpret electronic schematics. Ability to use standard bench test equipment (DMM, Scope, etc.). Familiarity with IPC standards (e.g., IPC-A-610, IPC-1711/7721) for PCB inspection rework. Demonstrated ability to isolate component-level failures and perform corrective actions. If you are interested in this Electronic Technician job, then please click APPLY NOW. For other opportunities available at Akkodis go to **************** If you have questions about the position, please contact Sunny Kumar at *****************************. Equal Opportunity Employer/Veterans/Disabled Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client. To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit ****************************************** The Company will consider qualified applicants with arrest and conviction records by federal, state, and local laws and/or security clearance requirements, including, as applicable: · The California Fair Chance Act · Los Angeles City Fair Chance Ordinance · Los Angeles County Fair Chance Ordinance for Employers · San Francisco Fair Chance Ordinance

Hi, I hope you are doing good. I have a job opportunity related to your profile with one of our client, please find below Job Description for your review. If you are interested and available for the following position then please send your updated resume in word format along with your contact details to discuss further. Role:Technology Lead - Core Java, JSP, JDBC, J2EE, Struts, RESTful webservices, Hibernate, using the latest SDKs and tools and frameworks such as Spring, RxJava Duration: Full TIme Location: Cranston, RI Qualifications Basic • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education • At least 4 years of experience with Information Technology Preferred • At least 4 years of Java development experience, ideally in a team lead role • Knowledge of architectural design patterns, performance tuning and functional designs. • At least 4 years of experience in Core Java, JSP, JDBC, J2EE, Struts, RESTful webservices, Hibernate, using the latest SDKs and tools and frameworks such as Spring, RxJava • Ability to develop functional, technical and user interface designs for an application that meets the defined requirements (business, system performance and standards) • At least 4 years of experience in specific coding concepts and/or languages, especially around modern application architectures. • At least 2 years experience with web applications that use responsive design to better support mobile browsers. • AT least 2 years of experience in highly-secured online environments that use n-tier designs and extensive firewalling to enhance security. • At least 4 years experience interfacing with back-end applications using MQ, SOAP, RESTful services, and JSON. • At least 2 years of experience in multi data center physical implementation models for scalability and resilience. • Experience with Spring Boot, Netflix OSS, HATEOAS, Gradle/Maven is a plus. ReST/Resource Oriented Design, Wiremock, JUnit/Mockito/Assert4J, AMQP/JMS/MQ, Functional Reactive/ Lambdas/Streams, Agile/Jira,Jenkins/Cobertura/PMD/FindBugs are good to have. • Experience and desire to work in a Global delivery environment • Communication and Analytical skills Qualifications • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education Additional Information All your information will be kept confidential according to EEO guidelines.

Benefits: Bonus based on performance Competitive salary Signing bonus Company parties Opportunity for advancement $250 sign-on bonus and after 90-day probationary period another $750 We provide: Year-round stable, steady work Regular work hours Flexible scheduling Cover related expenses such as gas, oil changes, etc. *varies by location TruBlue t-shirts, polos, and other company gear for the team Strong office support TruBlue of Attleboro is a Home Ally Service company dedicated to providing premium Construction and handyman services with bonded and insured technicians, giving our customers peace of mind. Our mission is to help people maintain the safety and value of their homes by offering handyman services, home assessments, and regular maintenance We are searching for a reliable lead home technician (handyman/handywoman) to provide general home services to our customers in our community AND lead a group of technicians who will report to you. If you have 10 or more years of paid experience in general carpentry and handyman work, we want to hear from you. We are looking for a seasoned Team Leader with the following experience: Massachusetts CSL (Unrestricted Construction Supervisor License) (Not required but perferred) Managing 1 to 3 person teams Purchasing job materials Job estimating Deck building Door Installations Bathroom upgrades / remodel Quoting jobs / projects Drywall repair / patching/ caulking Flooring repair and installation General carpentry General home repairs and handyman work Kitchen repair / remodel Minor plumbing and electrical Painting interior and exterior NOTE: Requires your own Truck/Van and tools. Company owned Vans maybe available in the future if availble. What we value: FAMILY - Why else are we in this business? It is our most important asset, and we strive to make everyone feel like they are part of our family! INTEGRITY - Treating people with respect and looking for the same in return, everyone has a voice! TRUST - Achieved through reliability and credibility, cannot just talk it, ya gotta walk it too! QUALITY - Taking pride in one's work and providing the best value and customer experience possible, they will not always remember the work that was done, but they will remember you! The appropriate candidate for the Lead Technician/Handyman position will be proficient in miscellaneous around-the-house type repairs like carpentry, basic plumbing, drywall, painting, and basic electrical. Also, large construction projects requiring permits such as deck,. Candidates do not need to be licensed tradesmen, but those candidates are welcome to apply. Qualified candidates will need a driver's license, a reliable vehicle, and standard tools. Candidate must also be a legal citizen of the US, and speak fluent English We are actively interviewing for this position - if you have the skills we're looking for, apply today, and our hiring manager will follow up! All locations are independently owned and operated. Service offerings, certifications, and licenses vary by location. T.B. Franchising Systems, Inc. is not affiliated, connected or associated with TruPros International, Inc. or any of its services. All inquiries specific to employment at this location should be made directly to the franchise location, and not to TruBlue Home Service Ally Corporate office."

JLL (NYSE: JLL) is a leading professional services firm that specializes in real estate and investment management. A Fortune 500 company, JLL helps real estate owners, occupiers and investors achieve their business ambitions. In 2016, JLL had revenue of $6.8 billion and fee revenue of $5.8 billion and, on behalf of clients, managed 4.4 billion square feet, or 409 million square meters, and completed sales acquisitions and finance transactions of approximately $145 billion. At the end of the second quarter of 2017, JLL had nearly 300 corporate offices, operations in over 80 countries and a global workforce of more than 80,000. As of June 30, 2017, LaSalle Investment Management had $57.6 billion of real estate under asset management. JLL is the brand name, and a registered trademark, of Jones Lang LaSalle Incorporated. For further information, visit ************ Job Description The Site Regulated Services Lead/Quality Technician will have a primary focus on overseeing select site services which require additional oversight due to the regulated environment, including but not exclusive of GMP cleaning and pest control. The person in the role will strive toward innovation, assist in lowering cost of delivery and work with suppliers to integrate the service into operations while dramatically enhancing the customer experience. The Regulated Services Lead will collaborate with Quality Assurance and the client to ensure effective participation in and adherence to quality programs. They will drive towards a higher level of cleanliness as well as achieve minimum scoring metrics as stipulated in both Client and Vendor contracts. The candidate will have a proven career history of successfully managing change and GMP/Quality experience. This position reports directly to the Site Facility Manager. ESSENTIAL FUNCTIONS Understand and ensure compliance in GMP space Customer Focus: Be a true innovator and genuine service-oriented individual to continuously monitor established quality procedures and resolve internal quality issues and customer complaints concerning product and or service dissatisfaction. Communication: Directly interface, both verbally and written, with client vendors, and JLL Management Compliance: Stay current with all Client, Federal and State regulations/codes, comply with specifications, and ensure standards are met. Support Quality Assurance to include training, assigning tasks, performance appraisals, conducting investigations, assisting with CAPAs, and monitor procedures to ensure processes are completed in an efficient and safe manner, and within the scope of policies and procedures. Perform/support audits and prepare SOP's and training materials. Provides information to Vendors, Facilities staff and Service Providers as required to ensure that quality assurance expectations are communicated, understood and followed. Inspections: Participate in the creation and implementation of inspections and other quality practices and procedures.. These inspections should serve as an assurance of quality as measured by client surveys. Provide leadership and direction to advance service quality and enhance the client partnership to continuously improve operations and influence the behavior of all employees. Supplier Performance Management: Deliver high quality, creative, and cost-effective solutions. Monitor work requests to trend vendor performance. Raise the bar in vendor quality and service while reducing overall costs. Work with IFM managers to hold vendors accountable for delivering high quality service per contract expectations, partnering with vendors to continuously improve service quality and improvement plans, and resolve/troubleshoot service issues at the site level. Analytical capability: Analyze trends and utilize data to anticipate and proactively address issues in the environment. Financial Acumen: Challenge year-over-year cost increases and proactively identify ways to reduce “process waste” and costs. Qualifications EDUCATION AND EXPERIENCE Bachelor's degree in Engineering, Mathematics, Science or another relevant field is desired but not required; experience in lieu of degree will be considered. 5 years of GMP or ISO 9000 experience in manufacturing. Experience in pharmaceutical manufacturing preferred. Must have proven, successful GMP or Quality Compliance/Assurance experience working with vendors performing services in GMP space GMP PEST CONTROL PROGRAM Proven capabilities on addressing and remediating pest sightings and investigations in a GMP Manufacturing Facility. Ability to establish rationales on Pest Control Best Practices. Ability to prepare and analyze Pest Control Trend Reports, subject to Regulatory Agency review. Experience in auditing GMP Pest Control Programs. Some knowledge in entomology and common insect behavior. GMP | CLEAN ROOM JANITORIAL AND SANITIZATION PROGRAMS Strong Knowledge of Environmental Controls of GMP Clean Rooms. Strong understanding of Regulatory Expectations. Ability to recommend, frequency and propose recommended dilutions of cleaning detergents for specific needs and situations. Develop cleaning procedures, work instructions and log forms in compliance with regulatory expectations. Train on Cleaning Methods and Procedures. Proven capabilities on addressing and remediating investigations related to Environmental Monitoring excursions as it related to a cleaning/disinfection programs. Ability to recognize when a GMP Change Control is required when proposing new cleaning methods, detergents and consumables. KNOWLEDGE, SKILLS, AND ABILITIES Must possess strong interpersonal skills with the ability to build rapport quickly Knowledge of Quality Engineering techniques, CMMS systems, and Quality Management Systems Exhibit excellent written and verbal communication skills Ability to analyze reports for the purpose of ensuring compliance with scope of work Excellent PC skills: proficient in all MS applications, especially Excel, Word, PowerPoint, Visio Speak, read and write fluent Englis Additional Information All your information will be kept confidential according to EEO guidelines.

We're looking for a Technical Lead to join our Product Engineering team at our HQ in Kendall Square. This is a fantastic opportunity to work with an amazing team and make a real and immediate impact for our members and users. What you'll be doing: Build and test features for a rapidly growing consumer-facing application. Take a lead role in steering architecture to scale technology and process to a high scale and quality. Work closely with stakeholders in various internal groups to help balance delivery speed and quality. Mentor and train junior developers to maximize team velocity. About you and your skills: Customer focused outlook on software design. 5+ years building out maintainable applications with modern programming languages such as Java and Javascript Experience building solutions for AWS (or other cloud services) Experience working with distributed systems (microservices) Experience with containers and container orchestration systems a plus! Benefits: We pay 100% of the cost of both your medical and dental premiums directly to the insurance companies Establish an HSA to cover any out-of-pocket expenses you may incur that are not covered by the insurance Employee parking/MBTA costs Host lots of fun all-company events Fully stocked kitchen