Telecom technician jobs in Medford, MA - 2,872 jobs

Job Title: Field Service Technician Coverage area: Greater Boston area Department: Service (Operations) Reports to: Service Manager FLSA Status: Hourly, Non - Exempt SUMMARY: The Field Service Technician provides customer service in person and/or by telephone to customers in and around the greater Boston area. Technicians will also help fulfill the needs of the maintenance schedule when needed by performing preventative maintenance on parking access, as well as software and/or hardware. Works with upper-level support to troubleshoot/setup/configure car access systems to include LAN (Local Area Networks). Effectively understands and troubleshoots basic setup of credit card configuration within the PARCS (parking access & revenue control system) network. ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform field repairs on parking access system and building access systems, software and/or hardware related Troubleshoot and correct problems on devices/equipment, down to board level, low voltage Correct/fixes; minor to complex software issues on parking/access systems Understand and troubleshoot the entire setup of a SKIDATA network (LAN) Properly identifies all network devices on a LAN (router, modem, switch etc.) Can properly use handheld devices like, but not limited to, multi meter, Network tester, toner, etc. Understand basic relay logic Works with upper-level support to setup/configure firewall, router, and other network devices Provides effective customer service, to internal and external customers Properly identifies when higher level support is needed. Work closely with peers and support team to ensure customer expectations are met Effectively execute troubleshooting instructions from higher level support Properly maintain vehicle status and maintenance, as required Properly maintains his/her inventory levels, by properly transacting in ERP (SNOW) system Communicates effectively with service coordinator, advisors, and service management team Responsible for transactions for assigned work orders (WOs) in ERP system on a per WO basis (parts and labor), also to include maintenance checklist, as required by existing processes Perform monthly preventative maintenance - scheduled inspection, cleaning, lubricating, and adjusting of the equipment Other duties, as assigned QUALIFICATIONS: This is an experienced position within the Service Department. To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required: Must be at least 21 years old, with a valid driver's license; have and maintain a driving record clean of any major or numerous violations Must be able to drive to field / customer locations to perform field work Working knowledge of Windows Server 2008/2012/2016, SQL, Windows OS 7, 10 and above, and network firewall configurations Must possess aptitude to learn new technologies The ability to work independently all while keeping others informed of your processes and progress via multiple avenues - including ERP System, email, and/or phone Proficiency in Microsoft Project, Excel, and PowerPoint Must be able to complete SKIDATA technical certified training courses - within 24 months; or has completed required certified courses in the technical career track. Specific product/equipment and software training supplied by SKIDATA EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED) or equivalent and two (2) years of training/experience in related field required, or equivalent combination of education and experience. Good skills in the use of hand tools required - experience using ERP software a plus. CERTIFICATES, LICENSES, REGISTRATIONS: Valid Driver's License, in state of residence. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to drive motor vehicle; sit; stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop; kneel; crouch; or crawl; and talk; or hear. The employee must frequently lift and/or move more than 50 pounds. Specific vision abilities required by this job include close vision, distance vision, and depth perception; standing for long periods of time; climbing ladders, stairs, ramps; handling and assembling small parts, use of a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment including oscilloscopes, ammeters, and computers/digital equipment. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and/or automobiles. The employee is occasionally exposed to wet and/or humid conditions; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; risk of electrical shock. The noise level in the work environment is usually moderate to occasionally loud. TRAVEL: There may be occasional travel outside of the employee's regular region; this travel may be by airplane or vehicle and will be planned with as much advanced notice as possible. SCHEDULE: Monday through Friday - Available 8am - 5pm. Saturday and Sundays - Possible with advance notification. The general hours of the position are Monday through Friday (8 a.m. to 5 p.m.); however, the expectations are that you be flexible to work as the needs of the business require. This may require occasional overtime; working on Saturday/weekends; and/or before or after the hours of 8 a.m. to 5 p.m. Technicians are required to be on an on-call rotation for one week per month. Supervisor will give as much advance notice as possible and try to evenly distribute hours based on business needs among the employees with skills, knowledge and ability for the work that needs to be accomplished. SKIDATA Inc. is an equal opportunity employer. All qualified applicants for employment will be considered without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, status as an individual with a disability, veteran status, or any other basis protected by federal, state, or local law. EEO M / F / D / V

Fiber Technician Job ID: 554165589 Lightpath is one of the largest competitive local exchange carriers in the tri-state area. Weown and operate our infrastructure "from the ground up" by deploying over 20,000 route miles connecting 13,500 on-net/LIT buildings. With a strong portfolio of cutting edge solutions for Internet, WAN, Voice, SD-WAN, Security & Cloud services, we enable Enterprise customers of all sizes the ability to react to new challenges while developing best practices for the future. With Lightpath's continued focus on network excellence and a "customer first" service commitment, we are building a workforce of the best talent that will meet the needs of our customers and reflect the diverse communities we serve. Job Summary The Fiber Technician is a field position that directly works to help maintain and expand the fiber network as well as complete the following tasks along with additional duties as assigned. This position is an hourly position that will require the individual to always possess a valid driver's license, maintain a stellar driving record free from any major offences that may affect Lightpath' s MOD rating. The position is a hands-on labor-intensive job that requires a heavy amount of experience in fiber splicing, equipment installation, troubleshooting and cable placement. The work will take place in but is not limited to buildings, confined space, side of the roadway and aerial locations. This position will require off hours, weekend, and holiday work. In addition to being part of an on-call rotation in support of the network that will require being available during various holidays and weather events. Responsibilities Complete field survey of a path for a new cable to be installed within a building, conduit run or aerial pole path. Capture all the information related to the path using varioustools of technology anddocument in a step-by-step method of procedure, that will be customer facing. Lightpath to provide that form document. Ability to meet with representatives from different municipalities and review proposed projects, file, and submit permit applications, track the application, and follow up on its approval. Be able to communicate with other Lightpath employees to obtain any required information the municipality would request such as bonds and insurance documents or payments. Work directly with our customers in the field, take and perform calls and email to update on project status and share documentation on each project with co-workers. Track new and ongoing projects by maintaining numerous Project Trackers. AttendUtility, Municipal and customer meetings to review and obtain permissions for newly proposed customer projects. Some of these meetings occur after hours and weekends. Some of the meetings are out of State and require extended travel times. Operate a bucket truck and able to work aloft to access splice cases and lashing fiber cable. Install a lashing machine on the strand and lash small sections of fiber to secure the supporting strand. Access confined space locations to audit conduits and place cable or remove splice cases and place in the vehicle to have work completed. These spaces will require a pump to evacuate water and the person to work in a wet and dark environment. Shall possess knowledge of fiber optic filters and CDWM filter splicing and testing. The technician must also be able to operate an EXFO OTDR and 400 gig test set and work with Lightpath or contracted resources to complete fiber and provisioning testing for circuits on an as needed basis. Individuals must be willing to learn and attend continuing ed classes for OTDR, electronic equipment and fiber splicing. The technician must be able to operate a fusion splice machine (single and mass) for fiber optic cables. This work requires a steady hand and the ability to sit ina single location for extended periods of time. The technician must be able to work onladders both 28-foot extension and step up to 8-foot-high step ladders. The technician will also need to cover on-call shifts to support the Lightpath fiber Network. This at times may require working in adverse conditions and on holidays. Requirements Must have excellent follow-through skills, be detail-oriented and be able to develop and manage accurate data in Project Trackers. Ability to travel for short periods of time. College Degree in Engineering, Communications or related field experience preferred. 5+ years' experience in fiber optic construction installation and maintenance. Superb timeline tracking and daily reporting skills on Excel, MS Office, experience with MS VISIO a plus. Excellent customer service skill sets. Excellent communicator who can coordinate multiple moving parts and multiple customer tracking. Ability to use Google Earth. Ability to understand and manage project goals, and deadlines. Pro-Active and organized individual who has excellent follow through skills, comfortable meeting with customers, excellent time management, self-motivated individual. Articulate, organized, and detailed individual who can interact effectively with customers, and other internal employees related to the project. Excellent interpersonal and communications skills. Ability to work at night and off hours. Other duties as assigned. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Physical Requirements and Working Conditions Requires the ability to sit for extended periods, stand, bend, walk, communicate via telephone, computer and/or face-to-face contact, vision to monitor, and use basic office equipment such as a personal computer, copier, and fax machines regularly during work. May be required to operate vehicle for Company business. Work is performed in an office environment. Must be able to work outside in all types of weather to hang signs and flyers, vehicles, and business. Must be able to carry 75 pounds and work in an aerial lift device. Lightpath is an Equal Opportunity Employer committed to recruiting, hiring and promoting qualified people of all backgrounds regardless of gender, race, color, creed, national origin, religion, age, marital status, pregnancy, physical or mental disability, sexual orientation, gender identity, military or veteran status, or any other basis protected by federal, state, or local law. Lightpath collects personal information about its applicants for employment that may include personal identifiers, professional or employment related information, photos, education information and/or protected classifications under federal and state law. This information is collected for employment purposes, including identification, work authorization, FCRA-compliant background screening, human resource administration and compliance with federal, state and local law. This position is identified as being performed in/or reporting to company operations in Massachusetts. The pay range at the time of posting in the specified locations is $60,000 - $70,000/year. Pay ranges are supplied in compliance with Massachusetts law. Pay is competitive and based on a number of job-related factors, including skills and experience. Some of our featured benefits include medical, dental, vision insurance, yearly bonus program and company matched 401k.

City Boston, Framingham, Marlborough, Nashua, Worcester State/Province Massachusetts, New Hampshire Country United States Department DIRECT SALES Date Monday, November 3, 2025 Working time Full-time Ref# 20036651 Job Level Specialist Job Type Experienced Job Field DIRECT SALES Seniority Level Associate Currency USD - United States - US Annual Base Salary Minimum 39,510 Annual Base Salary Maximum 79,020

We are seeking cable technicians for ongoing low voltage projects across the state of MA, we will needs techs to have basic hand tools, reliable transportation, as well as the willingness to learn. *Job Type & Location*This is a Contract position based out of Woburn, MA. *Pay and Benefits*The pay range for this position is $20.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) *Workplace Type*This is a fully onsite position in Woburn,MA. *Application Deadline*This position is anticipated to close on Jan 19, 2026. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Riley Power group, LLC is a full-service maintenance and capital construction services company headquartered in Pinehurst, NC. We work nationwide on some of the most challenging, exciting construction and maintenance projects in the industrial, power generation, and defense sectors. We are currently hiring a skilled MOV Technician. If you are a hardworking person who possesses the skills and ability to perform the job as outlined below, we would love to hear from you! This position could be located anywhere nationwide. It all depends on where the client's needs are located. Essential Function of this position may include but is not limited to: Perform MOV refurbish activities including preventative and corrective maintenance, actuator regrease, electrical equipment removal/installation, valve position limit switch setup on Motor Operator Actuators (Limitorque, Rotork, EIM etc.). Qualification, education, and experience requirements: Must have 3 years' experience in MOV refurbishment. Completion of a Motor operated valve training course and pass MOV TPE. Must have a high school diploma or equivalent. Successful candidate must possess the willingness and ability to complete and pass all pre-employment and employment screening requirements which may include but are not limited to; practical and written skills assessments, computer-based-training, medical, psychological, background and substance abuse screening(s).

Service Technician - Every day is an opportunity for you to turn an apartment into a home. #WRK4UDR. UDR, Inc. and its affiliated companies are seeking a Service Technician to join our team at 100 Pier 4, our apartment community (369 homes) located in Boston, MA. Key Qualifications: Technical of vocational certificate and/or degree preferred. Minimum of two years of experience in building and mechanical maintenance including plumbing, electrical, appliance repair painting and drywall. Knowledge and experience of HVAC and carpentry a plus. EPA Type II or Universal certification preferred. Valid driver's license and rotating on-call responsibility required. Some locations require certification in pool operation (CPO). Essential Job Functions: Respond to resident requests for maintenance and service by taking appropriate action to repair and/or restore service within the quality and time standards established by the organization. Maintain the overall appearance and cleanliness of the community by ensuring that grounds, amenities, building exteriors/interiors, market ready units, breezeways, curbs, signage, leasing office, central garbage areas, parking lots and other buildings and common areas are free of debris, trash, graffiti, and other items which affect the appearance of the community. All deficiencies and or risk management safety issues are reported immediately. Ensure that apartments are ready for occupancy by performing various and as needed electrical, HVAC, plumbing, carpentry, appliance repair, and other miscellaneous equipment maintenance and repairs, as well as carpet cleaning, painting, and overall apartment cleaning or other activities as necessary or as directed. Maintain tools, equipment, and workspace and ensure they are organized and in proper working order, request replacements as necessary, and assist in stocking the inventory. Provide superior customer service to internal and external customers. Perform other duties as assigned or as necessary. Exceptional Benefits: We offer a comprehensive benefit package and discounts to live in our premier communities! UDR, Inc., an S&P500 company, is one of the nation's largest owners and managers of residential apartment communities with a mission of offering remarkable apartment homes in the most desirable locations throughout the United States. Share your expertise, skill and commitment to excellence with us, and be a part of UDR's team. #WRK4UDR Pay: $22-$26/hr. UDR is proud to provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. UDR is committed to providing and maintaining a diverse workforce and an inclusive work environment with equitable access and opportunity for associates to participate, grow, and reach their full potential. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Milton CAT is seeking a highly driven person for our Paving Technical Communicator to work in our Maine, New Hampshire and Vermont region. This candidate will work within the Service Organization to support earthmoving equipment product line. Will act as liaison between CAT, Weiler and Milton CAT. Maintain high standards of customer service by providing technical support to technicians, managers, and supervisors. Note: We are recruiting for one open position and have advertised this position in multiple cities within our territory. Responsibilities Technical Support & Communication Assist service departments in ME, NH, and VT with timely and accurate repairs on CAT and Weiler paving equipment. Act as a liaison between Milton CAT and Caterpillar (CAT) to facilitate the flow of technical information. Provide backup coverage for Technical Communicators in other regions. Training & Product Introduction Present New Product Introductions (NPIs) for machines within the specialist group. Conduct training sessions as required to technicians on paving product. Shop and Field Support Help technicians diagnose equipment issues. Maintain ongoing communication with technicians regarding product issues and updates. Maintain communication with Shop and Field Management. Paving Product Focus Serve as the Technical Communicator for paving products in ME, NH, VT. Support growth in parts and service for paving products. Assist existing Product Support Consultants with paving product opportunities. Qualifications To perform this job successfully an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and ability required. Minimum of 5 years working with Earthmoving equipment in roles such as mechanic, Technical Communicator, or Trainer. Prefer high level of experience with paving industry in general. High level of Product Knowledge and Familiarity with the CAT product line. Strong oral and written communication skills, along with excellent -interpersonal skills. Ability to communicate effectively across various personnel levels. Strong mechanical knowledge and aptitude. Proficiency with CAT tools such as SIS (Service Information System) and ET (Electronic Technician). High level of Organizational Skills: Capable of managing multiple tasks simultaneously. Must hold a valid driver's license with a clean driving record. This job description is not intended to be all-inclusive. Your supervisor may request and assign you similar duties. Resumes that are mailed, emailed or hand-delivered to Milton CAT or any employee will not be considered. You must apply online. Background check and drug screening are required as part of our pre-employment process. Milton CAT is an equal opportunity employer that values the strength diversity brings to the workplace. We encourage applications from individuals with disabilities, minorities, veterans, and women. Applicants receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, sexual orientation, gender identity, handicap, disability, veteran status, genetic data, or other legally protected status. We base all employment decisions to further this principle of equal employment opportunity. VEVRAA Federal Contractor. EEO/AA employer.

Data Technician (Night Shift) Clearance Requirements: NA Contract (6-8 Months) Pay Rate: $20 - $26/hr We are seeking an experienced Data Technician / Structured Cabling Technician to support a large-scale Wireless Access Point (WAP) deployment project. This role is ideal for a hands-on professional with strong experience in Cat6 and fiber optic cabling, who thrives in fast-paced environments and takes pride in delivering high-quality infrastructure work. The technician will be responsible for installing, terminating, testing, and certifying structured cabling, as well as the physical installation of approximately 500 wireless access points across multiple building locations. This is a night-shift position (9:00 PM - 6:00 AM) and requires the ability to work independently while following industry standards and safety protocols. Key Responsibilities: Pull, terminate, label, and test Cat6 and fiber optic cabling Install and cable Wireless Access Points (WAPs) in accordance with project specifications Certify and document cable runs using industry-standard testers (Fluke or similar) Terminate cabling into patch panels, data racks, and network closets Interpret and follow blueprints, floor plans, and cable schedules Adhere to structured cabling standards (TIA/EIA) and project documentation Operate scissor or boom lifts safely while working at heights Maintain a safe, organized work environment and comply with all safety requirements Required Skills / Education: Minimum 2+ years of hands-on experience in structured cabling (Cat6 and fiber) Demonstrated experience independently installing and terminating WAPs Lift certification (scissor lift or boom lift) Proficiency using cable testing and certification equipment Ability to work overnight shifts with flexibility as needed Reliable transportation; Must supply personal hand tools, including: Cable cutters and strippers Punch-down tools Cable testers Must provide required PPE, including: Hard hat High-visibility vest Gloves Eye protection Steel-toe boots Preferred Qualifications: Experience reading and interpreting structured cabling drawings and floor plans Hands-on experience terminating into data racks and patch panels Familiarity with large-scale network or enterprise deployment projects About Seneca Resources: At Seneca Resources, we are more than just a staffing and consulting firm-we are a trusted career partner. With offices across the U.S. and clients ranging from Fortune 500 companies to government organizations, we connect professionals with opportunities that support long-term growth and meaningful impact. When you work with Seneca, you gain access to competitive compensation, comprehensive health, dental, and vision benefits, 401(k) retirement plans, and a dedicated team that advocates for your success. We take the time to understand your career goals and align you with roles that match your expertise and ambitions. Seneca Resources is proud to be an Equal Opportunity Employer, committed to building a diverse and inclusive workforce. We encourage all qualified individuals to apply.

Temp Cable Technician Smithfield, RI Running, terminating, and testing Cat-6A cable. Installing J-Hooks, punch-downs, etc. Mult-floor office buildings in Smithfield, RI and surrounding area. 6-8 weeks of work For the right candidate this could become an ongoing assignment. NIGHT WORK (6 PM - 4:30 AM). Must be willing/able to work overtime. Candidates must have their own hand tools (Punch down tool, crimper, wire stripper, snips, etc.) PPE gear required.

The Military Field Service Representative (FSR) located in Tolemaida, Colombia, will support the Colombian military in their operation, management, repair, installation, and maintenance of assigned GE equipment for starting up and operating a T700 engine depot. In this role, the FSR will act as a liaison between GE Aerospace and the customer. Candidates must be mobile to meet the needs of the customer, program and business. **Job Description** **Job Title** T700 Depot Military Field Service Representative - Tolemaida, Colombia **Company Intro/About GE Aerospace** GE Aerospace is a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. We power flight safely and reliably for today, tomorrow, and the future, partnering closely with customers to deliver high-quality outcomes with speed and efficiency. **Site, Business, OR Functional Area Overview** This role supports the startup and sustained operation of a T700 engine depot in Tolemaida, Colombia, serving the Colombian military's helicopter fleet. The Field Service organization is focused on operational readiness, on-time delivery, and cost-effective maintenance solutions that meet contractual and mission requirements. **Role Overview** The Military Field Service Representative (FSR) will serve as GE Aerospace's on-site liaison to the Colombian military, supporting depot startup and ongoing repair, installation, troubleshooting, and maintenance activities for T700 turboshaft engines. The FSR will coordinate technical support, drive issue resolution, and enable customer success while meeting contractual, safety, and quality objectives. **Key Responsibilities** + Act as the single point of contact to the customer for timely resolution of depot-level tooling, maintenance, repair, and engine management concerns + Establish and maintain strong on-site relationships to provide ongoing technical and business support + Provide hands-on technical assistance leveraging in-depth knowledge of T700 installation, operation, and troubleshooting to keep the customer on schedule + Use disciplined analytical methods to drive root-cause analysis; create presentations and spreadsheets (including pivot tables and Pareto charts) to track issues and implement lasting corrective actions + Exercise sound judgment to propose solutions beyond set parameters for complex maintenance and troubleshooting scenarios, drawing on internal and external resources + Lead low-risk projects and serve as a resource for colleagues; explain technical concepts and build consensus across maintenance, engineering, and management stakeholders + Uphold and promote safety, quality, delivery, and cost objectives; ensure compliance with export control and security requirements **Required Qualifications** + Fluent in Spanish and English (reading, writing, and speaking) + Bachelor's degree from an accredited college or university; or a High School Diploma/GED plus a minimum of 4 years in a field service representative or jet engine maintenance role + Minimum 3 years of field maintenance, modification, and repair experience on T700 engines + Strong oral and written communication skills with demonstrated ability to analyze and resolve problems + Ability and willingness to travel as required + Ability and willingness to obtain and maintain a U.S. Government security clearance **Desired Characteristics** + 5+ years of hands-on turboshaft engine maintenance experience + T700 experience across depot, organizational, intermediate, and flight line troubleshooting levels + Strong customer interaction and communication skills; proven leadership abilities + Demonstrated proficiency in repair troubleshooting, shop operations, testing of jet engines, and support equipment tooling + Ability to make formal presentations to maintenance, engineering, and management at all levels + Project management experience; ability to lead and influence customers and peers + Experience mentoring and transferring technical knowledge; strong written and oral communication + Ability to work independently with technical guidance as needed + High degree of tact and diplomacy to collaborate effectively with customers at all levels + FAA Powerplant license (preferred) **Additional Information** The base pay range for this position is $100,000.00-133,000.00 USD Annual The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on January 23rd, 2026 GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage, access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits includ tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time -off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or prog rams (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. © 2023 GE Aerospace and/or its affiliates. All rights reserved. Attorney-Client Privileged **Closing** At GE Aerospace, we are committed to fostering an inclusive workplace that values diversity and empowers employees to thrive. This role requires access to U.S. export-controlled information. Therefore, for applicants who are not asylees, refugees, lawful permanent residents, or U.S. Citizens (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherwise known as a U.S. Person), final offers will be contingent on the ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. Closing At GE Aerospace, we are committed to fostering an inclusive workplace that values diversity and empowers employees to thrive. This role requires access to U.S. export-controlled information. Therefore, for applicants who are not asylees, refugees, lawful permanent residents, or U.S. Citizens (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherw _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Join Our Team as a Cable Technician! Are you looking for a rewarding career opportunity? Koscom Cable Inc. is hiring Cable Technicians across the US! Whether you're an experienced pro or just starting out, we want you on our team. Position: Cable Technician Type: 1099 contract Compensation: Weekly pay ranging from $1200-$1700 (experienced techs can earn up to $2000/week) Benefits: Training allowance, weekly paycheck Responsibilities: - Running cables from poles and inside homes (physical fitness required) - Verifying signal levels on cable outlets - Providing TV, Internet, and Phone services for customers - Installing equipment (modems, cable boxes) - Troubleshooting technical issues - Educating customers on our services Requirements: - Own a white VAN or pickup truck (leasing options available) - Valid drivers license - Active Social Security Number - iPhone/iPad for app usage - Conversational English (other languages welcome) - Ability to pass a drug test and background check - Ability to carry heavy objects (like a 28 ft ladder) - No Experience Necessary! We'll provide training to help you succeed. Apply Now! Leave a request and we'll reach out to you. Check out our employees in action: ********************************** ZTrc9afp8 ******************************************* ******************************************* *Applicants must successfully pass a drug test and background check after a conditional offer of employment is made.

$24-26/hour The Facilities Field Staff is responsible for assisting and performing repairs and improvements to the agency-owned real estate. Minimum Education Required High School Diploma/GED Additional Shift Details Monday through Friday Responsibilities Perform repairs and maintenance duties for all the agency sites as assigned. Perform walk-thru and repairs, as well as attend various inspections as needed for the agency's sites. Maintain company assigned vehicle and ensure routine maintenance is scheduled as needed. Follow all work order procedures including accessing work orders through database and updating work orders upon completion. Responsible for purchasing necessary supplies and materials for repairs as needed. Responsible for maintaining proper upkeep of company tools and equipment. Attends and actively participates in supervision and team meetings. Ensure that clients are treated with dignity and respect in accordance with Advocates' Human Rights policy. Adhere to all principles related to the Advocates Way Perform all duties in accordance with the agency's policies and procedures. Qualifications High School Diploma or GED required and minimum of 5 year experience in maintenance and general repairs Must possess ability to multi-task in a fast-paced environment. Strongly prefer that a candidate will have a demonstrated understanding of and competence in serving culturally diverse populations Must be able to perform each essential duty satisfactorily. Must be able to perform with minimal supervision Must possess ability to use office equipment such as scanner, digital camera, copier, printer, fax and phone systems. Must have strong computer skills Must possess ability to read a map and be willing to travel. Must possess excellent customer service and interpersonal communication skills. Must possess ability to work independently or as part of team. Must possess ability to read and speak English and communicate effectively verbally and in writing. Must hold a valid drivers' license. Advocates is committed to cultivating a diverse and welcoming community where everyone feels respected and valued. Advocates fosters a culture of inclusion that celebrates and promotes diversity along multiple dimensions, including race, ethnicity, sex, gender identity, gender expression, sexual orientation, partnered status, age, national origin, socioeconomic status, religion, ability, culture, and experience.

Job DescriptionAbout UsHighland Electric Fleets' mission is to make electric fleets accessible and affordable for all, enabling communities to realize the benefits of cleaner, quieter and healthier fleets. Highland is North America's leading provider of Electrification-as-a-Service (EaaS). Founded in 2019, Highland partners with school districts, municipalities, and fleet operators to make the transition to electric fleets simple and affordable. Highland proudly serves as the Official Electric School Bus Provider of the LA28 Olympic and Paralympic Games and Team USA. From pioneering vehicle-to-grid technology to managing some of the nation's largest electric school bus fleets, Highland delivers reliable, cost-effective solutions that support local communities and drive the future of transportation. What You Can Expect from Highland:· Competitive base salary and 10% performance-based bonus program· Mobile Maintenance Work Vehicle provided · Monthly cell phone and internet reimbursement of $130· 100% Health, Vision, and Dental coverage for employees & their dependents· 3 weeks accrued Paid Time Off and 5 Sick Days per year· 401(k) program and company match· Paid CDL and ASE pathing· A supportive, highly collaborative, team-oriented environment The Field Service Technician is enthusiastic about EVs and a self-starter who will work closely with customers to ensure that Highland's electric vehicles and charging stations are working properly and that buses can get students to where they need to be. No day will look the same, but responsibilities will include performing original equipment manufacturer-approved testing, repairs, and troubleshooting customer issues. Highland will provide the relevant training to repair all local equipment including basic electric vehicle functions, Level 2 EV chargers to DC Fast Chargers, and communications equipment.Key Responsibilities: Act as the company's on-site advocate for EV's and EVSBs, striving to achieve 90% overall uptime Represent the company at customer locations with the highest standards of professional conduct Retains a clean and safe work environment and brings any unsafe practices or conditions to management Diagnoses malfunctions and performs electric vehicle and charger repairs (e.g. adjust/test steering, electrical, cooling, lubricating, braking systems, drive trains, suspensions, power steering units, etc.) and related assigned duties within qualification level, in accordance with all relevant Federal, State/Provincial and local guidelines and requirements. Test-drives vehicles to ensure repair resolved Maintain detailed and timely documentation for troubleshooting and repairs, records time and materials used for each assignment in asset management platform Assist in managing of external support vendors to follow up and document repairs being made to Highland's assets Provides repair and maintenance assistance to junior technician staff Performs road calls and on the road repairs as assigned. Undergo electric vehicle and charger OEM and internal trainings Desired Qualifications: Minimum of 5+ years Electrician, Electric Vehicle, or Medium/Heavy duty truck Fleet repair experience Advanced Diagnostic, Electrical, and AC skills required Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals Knowledge of MS Suite products Possess the recommended tools for a Medium Duty technician as well as electrical diagnostics tooling Flexibility to work bus depot hours (early morning to afternoon) and weekends (when on scheduled shift) Clean Driving Record is required Requirements within 12 months of employment: Commercial Driver's License Required / Minimum 3 ASE certifications required (bonus compensation available if greater) / and Minimum of 4 OEM Certifications required (bonus compensation available if greater) Highland Electric Fleets provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Highland Electric Fleets complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

TOMRA of North America is a top International Reverse Vending and Recycling Company. At TOMRA transformation is at the heart of everything we do. We transform ideas & technology to create intelligent and pioneering tools to support a sustainable future.

At CAES by Honeywell, we engineer solutions for the world's most critical missions. We serve customers in the defense and aerospace markets. Seeking a career that offers challenging, diverse projects and opportunities? Looking for a position with a company that offers long-term professional advancement? Searching for a place that values a diverse, team-based environment? One that values YOU. Consider CAES by Honeywell. You will report directly to our Operations Manager, and you'll work out of our Woburn, MA location on an On-site, work schedule. As a Production Test Technician, you'll perform operational testing on a variety of moderately complex RF and microwave production components of varying complexity. This can be tasks including but not limited to: set-up, calibration, and testing and troubleshooting of instruments, RF and DC circuits, assemblies, components, and other systems and equipment. In the Production Test Technician role, you'll be critical to the successful production and technical support for our Engineering and other teams in ensuring our products achieve their intended functions and delivery schedule in a satisfactory manner to all of our customers. You'll use your skills to work on Low to Medium Complexity Hardware, under general supervision. KEY RESPONSIBILITIES Determines compliance to test specifications, using methods and procedures from drawings, standard work and diagrams. May assist in the selection and set-up of specialized test equipment. May provide guidance to entry level production test technicians and support workers in the execution of production testing tasks. Measure medium complexity hardware. Maintain required certifications. Strengthen knowledge of CAES 6S framework and actively participate in 6S initiatives. Minimum Qualifications: High school diploma or GED equivalent 0-1 year of experience working as a Test Technician in a manufacturing/electronics environment Basic computer skills (Word, Excel, Timekeeping system, ERP system, Routing, etc.) Detail-oriented with good manual and eye dexterity (precise) Ability to adapt to changing circumstances and embrace new challenges Willingness to take on diverse projects and work with different teams Preferred Qualifications: HS Diploma or GED and additional training or specialized certification. 1-2 years' of experience working as a Test Technician in a manufacturing/electronics environment. Experience in defense, aerospace, or military industry. Good manual dexterity and experience/willingness to work using a microscope and small hand-tools. Basic computer skills: Utilization of Microsoft Office Suite, ERP Systems, etc. Good manual dexterity and experience/willingness to work using a microscope and small hand-tools Physical Requirements: Use hands to handle, control, or feel objects, small tools, or controls Reach with hands and arms Sitting. At times, looking through a microscope Standing or walking for prolonged periods of time Frequently required to stand; stoop, kneel, crouch or crawl Repeat the same movements Occasionally lifting of light items weighing 5 to 10 pounds Make quick, precise adjustments to machine controls Objects weighing 30 pounds or more must be accompanied by automation or second person to avoid injury We are interested in every qualified candidate who is eligible to work in the United States. However, we are not able to sponsor visas. BENEFITS OF WORKING FOR HONEYWELL In addition to a competitive salary, leading-edge work, and developing solutions side-by-side with dedicated experts in their fields, Honeywell employees are eligible for a comprehensive benefits package. This package includes employer-subsidized Medical, Dental, Vision, and Life Insurance; Short-Term and Long-Term Disability; 401(k) match, Flexible Spending Accounts, Health Savings Accounts, EAP, and Educational Assistance; Parental Leave, Paid Time Off (for vacation, personal business, sick time, and parental leave), and Paid Holidays. The application period for the job is estimated to be 40 days from the job posting date; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. Job Posting Date: December 16, 2025 U.S. PERSON REQUIREMENTS Due to compliance with U.S. export control laws and regulations, candidate must be a U.S. citizen, U.S. permanent resident, or have asylum or refugee status in the U.S. ABOUT HONEYWELL Honeywell International Inc. (Nasdaq: HON) invents and commercializes technologies that address some of the world's most critical challenges around energy, safety, security, air travel, productivity, and global urbanization. We are a leading software-industrial company committed to introducing state-of-the-art technology solutions to improve efficiency, productivity, sustainability, and safety in high-growth businesses in broad-based, attractive industrial end markets. Our products and solutions enable a safer, more comfortable, and more productive world, enhancing the quality of life of people around the globe. Learn more about Honeywell: click here Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status. Learn more about inclusion and diversity :click here

At CAES by Honeywell, we engineer solutions for the world's most critical missions. We serve customers in the defense and aerospace markets. Seeking a career that offers challenging, diverse projects and opportunities? Looking for a position with a company that offers long-term professional advancement? Searching for a place that values a diverse, team-based environment? One that values YOU. Consider CAES by Honeywell. You will report directly to our Operations Manager, and you'll work out of our Woburn, MA location on an On-site, work schedule. As a Production Test Technician, you'll perform operational testing on a variety of moderately complex RF and microwave production components of varying complexity. This can be tasks including but not limited to: set-up, calibration, and testing and troubleshooting of instruments, RF and DC circuits, assemblies, components, and other systems and equipment. In the Production Test Technician role, you'll be critical to the successful production and technical support for our Engineering and other teams in ensuring our products achieve their intended functions and delivery schedule in a satisfactory manner to all of our customers. You'll use your skills to work on Low to Medium Complexity Hardware, under general supervision. KEY RESPONSIBILITIES * Determines compliance to test specifications, using methods and procedures from drawings, standard work and diagrams. * May assist in the selection and set-up of specialized test equipment. * May provide guidance to entry level production test technicians and support workers in the execution of production testing tasks. * Measure medium complexity hardware. * Maintain required certifications. * Strengthen knowledge of CAES 6S framework and actively participate in 6S initiatives. Minimum Qualifications: * High school diploma or GED equivalent * 0-1 year of experience working as a Test Technician in a manufacturing/electronics environment * Basic computer skills (Word, Excel, Timekeeping system, ERP system, Routing, etc.) * Detail-oriented with good manual and eye dexterity (precise) * Ability to adapt to changing circumstances and embrace new challenges * Willingness to take on diverse projects and work with different teams Preferred Qualifications: * HS Diploma or GED and additional training or specialized certification. * 1-2 years' of experience working as a Test Technician in a manufacturing/electronics environment. * Experience in defense, aerospace, or military industry. * Good manual dexterity and experience/willingness to work using a microscope and small hand-tools. * Basic computer skills: Utilization of Microsoft Office Suite, ERP Systems, etc. * Good manual dexterity and experience/willingness to work using a microscope and small hand-tools Physical Requirements: * Use hands to handle, control, or feel objects, small tools, or controls * Reach with hands and arms * Sitting. At times, looking through a microscope * Standing or walking for prolonged periods of time * Frequently required to stand; stoop, kneel, crouch or crawl * Repeat the same movements * Occasionally lifting of light items weighing 5 to 10 pounds * Make quick, precise adjustments to machine controls * Objects weighing 30 pounds or more must be accompanied by automation or second person to avoid injury We are interested in every qualified candidate who is eligible to work in the United States. However, we are not able to sponsor visas. BENEFITS OF WORKING FOR HONEYWELL In addition to a competitive salary, leading-edge work, and developing solutions side-by-side with dedicated experts in their fields, Honeywell employees are eligible for a comprehensive benefits package. This package includes employer-subsidized Medical, Dental, Vision, and Life Insurance; Short-Term and Long-Term Disability; 401(k) match, Flexible Spending Accounts, Health Savings Accounts, EAP, and Educational Assistance; Parental Leave, Paid Time Off (for vacation, personal business, sick time, and parental leave), and Paid Holidays. The application period for the job is estimated to be 40 days from the job posting date; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. Job Posting Date: December 16, 2025 U.S. PERSON REQUIREMENTS Due to compliance with U.S. export control laws and regulations, candidate must be a U.S. citizen, U.S. permanent resident, or have asylum or refugee status in the U.S. ABOUT HONEYWELL Honeywell International Inc. (Nasdaq: HON) invents and commercializes technologies that address some of the world's most critical challenges around energy, safety, security, air travel, productivity, and global urbanization. We are a leading software-industrial company committed to introducing state-of-the-art technology solutions to improve efficiency, productivity, sustainability, and safety in high-growth businesses in broad-based, attractive industrial end markets. Our products and solutions enable a safer, more comfortable, and more productive world, enhancing the quality of life of people around the globe. Learn more about Honeywell: click here Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status. Learn more about inclusion and diversity :click here

GC&E Federal is seeking an Outside Plant Cable Technician. The candidate for this position will work within our team to support our government Information Technology (IT) and Inside and Outside Plant program with our client. As an OSP Technician you will be an integral part in ensuring the successful operations and maintenance of the Telecommunications team at Fort Devens, MA. Primary Responsibilities and Essential Function Support the Customer Service Telephone [Customer Service Representative Installation and Repair (CSR/I&R)] and OSP services requests, trouble tickets, PMCS of maintenance holes, telephone poles, and pedestals, and all other requirements. Create, validate, and update the NIPRNET diagrams and number of cable pairs/strands on cable plant drawings for leased circuits and Government owned circuits (approximately 100 buildings). Plan and manage circuit installation and maintenance services for Army tenant activities. Physical Requirements Predominantly outdoors environment Must be able to sit, stand, walk, stoop, kneel and reach Must be able to speak, write, read, and understand English May require frequent computer use for several hours at a time Frequently work at fast pace with unscheduled interruptions Must have visual acuity Must be able to lift up-to 25 pounds Location: Fort Devens, MA- This is not a remote position. Local candidates only. Required work authorization: United States Job Type: Full-time Experience with the following: Fiber, Copper & Coax Termination & Testing I3A Standards EIA/TIA Standards CAT5e/6/7 Installation Experience Plant-in-Place Drawings Analog and VoIP Phone Systems MS Office Suite Remedy and TMS Candidate Requirements: SECRET Clearance BICSI Trained GC&E Federal, Inc. offers a competitive benefits package to include: paid holidays, paid time off, medical, dental, vision, flexible spending account, LTD & STD, company paid life insurance, 401(k) and tuition reimbursement. It is the policy of GC&E Federal, Inc. to provide equal opportunity in recruiting, hiring, training, and promoting individuals in all job categories without regard to race, color, religion, national origin, gender, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other protected class or category as may be defined by the federal, state, or local laws or regulations.

**Be visionary** Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. **Job Description** Under general supervision, this individual will perform diagnosis, troubleshooting and repair or replacement of all mechanical assemblies used in FLIR Thermal Imaging Systems products. This individual will help identify and select the appropriate tooling, processes and procedures to complete any repairs, refurbishment, test and validation of work performed. Accurate and appropriate performance of these tasks will result in the successful repair and maintenance of these products **Primary Duties & Responsibilities:** 1. Conduct routine diagnosis, repair, refurbishment, service and support of mechanical assemblies, sub-assemblies, motors, bearings and wiring harnesses for all FLIR Imaging Systems' products. 2. Assist in developing standard repair and maintenance procedures which will be documented to company and ISO standards. 3. Provide technical support in the development of customer service spare parts inventory, including establishing requirements for content and quantity. 4. Provide accurate and timely repair estimates that include labor and material requirements. 5. Support the servicing of Imaging Systems demonstration equipment. 6. Perform other job related duties as required. 7. Work as a member of the service team to meet department goals related to repair turn times and customer satisfaction. **Job Qualifications:** + Requires a minimum of 1-2 years prior work/schooling experience in a related electronics field. + Degree or certificate in electronics or equivalent required. + Strong electro-mechanical troubleshooting skills, proficient with using electronic test equipment required such as digital voltmeters to perform continuity of system wiring. + A good working knowledge of computers, computer peripherals and programs such as SAP. + Must be able to read Schematics and wiring diagrams. + Must be capable of lifting a minimum of 45 pounds unassisted. + Must be able to solder 26Awg wires and 402 Smt components. + Preferred candidate will have 1-3 years prior experience servicing thermal imaging equipment. Applicants must be either a U.S. citizen, U.S. national, legal permanent resident, asylee, refugee or must be eligible to apply for and obtain the appropriate export control license from the U.S. Departments of State or Commerce. \#FLIR **Salary Range:** $49,300.00-$65,700.000 **Pay Transparency** The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, education/training, work experience, key skills, and type of position. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws. You may not realize it, but Teledyne enables many of the products and services you use every day **.** Teledyne provides enabling technologies to sense, transmit and analyze information for industrial growth markets, including aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, energy, medical imaging and pharmaceutical research.

Building the people that build the world. With platforms in HVAC and Detection and Measurement, SPX Technologies builds innovative solutions that enable a safer, more efficient, sustainable world. Through our RiSE talent development framework, we Reach, Identify, Strengthen, and Engage our employees to support them in their continued development. We're a global company of problem solvers, collaborators, and innovators, and our businesses build solutions that impact the world. As part of HVAC Cooling, SPX Cooling Technologies is a leader in high quality industrial HVAC equipment used to cool large facilities like hospitals, data centers, and power plants. With cooling towers, fans, and refrigeration units, companies rely on brands like Marley, Recold, and SGS to provide comfort and mission critical and industrial cooling solutions. JOB SUMMARY This position assumes a key role as the front-line SPX customer-facing representative, assisting our customers at sites throughout the UK across all stages of equipment lifecycle-including new installations, warranty work, planned maintenance, inspection work, and water treatment-related services. The role requires servicing and maintaining cooling towers across multiple OEM product lines, ensuring optimal performance, water quality, and compliance with relevant standards and legislation. In addition to core service activities, the Service Technician supports the growth of the SPX Cooling Technologies business by demonstrating best in class work ethics, maintaining strong customer focus, and identifying cross selling and new business opportunities during site visits. The position requires willingness to travel, along with overtime and occasional weekend working based on business needs. PRINCIPAL DUTIES AND RESPONSIBILITIES • Service, maintain, and install new and existing factory assembled cooling equipment. • Perform inspection, diagnostics, and corrective actions on cooling towers from multiple OEMs. • Carry out water treatment monitoring, testing, and basic remedial actions to support cooling system health and compliance. • Survey customers' installations and recommend improvements for enhanced performance, water efficiency, and alignment with current legislation. • Support UK factory sales with installation and assembly visits. • Assist sales personnel with competitor and SPX product information required for quotations. • Ensure all site work is completed in accordance with the latest Health & Safety guidelines. • Participate in inter departmental training programs. • Perform warranty repairs and assist with commissioning. • Effectively utilise SPX Leadership Standards to create a positive working environment that drives business objectives. KNOWLEDGE, SKILLS & ABILITIES • Experience servicing cooling towers and associated equipment across multiple OEM product ranges. • Practical knowledge of water treatment principles, such as system testing, dosing requirements, Legionella control, and water chemistry troubleshooting. • Ability to work unsupervised and under own initiative. • Strong communication skills and the ability to supervise sub contractors and internal staff. • Ability to work in confined spaces and at height. • Ability to perform site relevant manual handling. • Experience with the SPX Marley product range. • Flexibility to work overtime and adapt to schedule changes at short notice. • Willingness to travel throughout the UK and internationally on a scheduled or ad hoc basis. EDUCATION AND EXPERIENCE • Formal engineering qualification or a minimum of five years' experience in a similar role. • Demonstrated experience in water treatment servicing within industrial cooling environments. • Full UK driving licence. • Excellent communication and interpersonal skills. • Strong organisational and time management abilities. • Proactive, adaptable, and flexible attitude. • Computer literate. • Self motivated with strong decision making capability. • Ability to work alone while contributing effectively as a team member. How we live our culture Our culture is at the center of what we do and, more importantly, who we are. Our core values set a standard for how we manage ourselves, and our Leadership Model sets the standard for how we engage with each other. Whether you are an individual contributor or you lead a large team, each of us leads at SPX. What benefits do we offer? We know that the well-being of our employees is integral. Our benefits include: Competitive and performance-based compensation packages and bonus plans Educational assistance, leadership development programs, and recognition programs Our commitment to embrace diversity to build a culture of inclusion at SPX We value different backgrounds, experiences, and voices at SPX, and we are committed to challenging ourselves, openly communicating, and striving to improve every day. We believe in creating an inclusive work environment where everyone has a voice and is encouraged to realise their fullest potential.