Production Technician jobs at Teledyne Technologies Incorporated - 8106 jobs

TITLE: PLATING PROCESS TECHNICIAN FLSA STATUS: NON-EXEMPT A SHIFT: MONDAY THRU WEDNESDAY AND EVERY OTHER THURSDAY 6:00 AM TO 6:00 PM REPORTS TO: DIRECTOR, PLATING PROCESS ENGINEERING Under the direction of the Director of Plating Process Engineering, the Plating Process Technician provides support to the engineering teams in the plating area, including assisting with wet etch process, preparing and maintaining recipes, reviewing and documenting process or procedures, and expediting and dispositioning prototype wafers; maintains process controls using Statistical Process Control (SPC), collects and analyzes data, and recommends corrective action. This position is located in Milpitas, California. ESSENTIAL FUNCTIONS: Provides support to the engineering teams in the plating, wet etch, and stripping process areas Supports the plating, wet etch, and stripping processes by preparing, maintaining, and setting up recipes to ensure an efficient and consistent process Reviews and documents processes and procedures; partners with engineering to implement changes effectively Expedites and dispositions prototype wafers in the plating, wet etch and stripping areas Assists engineers to run plating process development experiments, collects and analyzes data, and recommends corrective action if required Reviews and maintains process controls using SPC and prepares charts and graphs Assists with routine trouble-shooting and resolves basic process-related issues Participates in and recommends modifications to procedures or processes in support of continuous improvement initiatives Collaborates with Engineering to qualify or approve new processes or procedures Creates reports, charts, or graphs on an ad-hoc or routine basis Prepares daily pass down report for engineers, next shift plating process technicians, and manufacturing plating technicians Responds to inquiries from other team members, managers, or departments Adheres to all safety policies and procedures as required Performs other duties of a similar nature or level* MINIMUM QUALIFICATIONS: Associates degree in Electronics or Industrial Technology and/or equivalent relevant experience Two years of experience working in the semiconductor industry Knowledge of plating, wet processes and procedures Hands on experience using metrology tools such as pH meter, Tencor Thickness Profiler, XRF, and B-H loop tools Proficient in the use of Microsoft Office Applications Required Knowledge, Skills, and Abilities: Knowledge of semiconductor or hard disk drive (HDD) principles and processes Knowledge and ability to use SPC to maintain process controls Knowledge of plating, wet processes and procedures Ability to collect and analyze data, present findings, and recommend corrective action Ability to adhere to all safety policies and procedures Ability to communicate effectively with all levels of employees and management Demonstrated ability to follow routine verbal or written instructions Demonstrated problem solving and organizational skills Demonstrated time management and prioritization skills Skilled at resolving issues quickly and efficiently Flexible and able to prioritize The hourly rate for this full-time position is between $25.00-$40.00 + bonus target + benefits. Within the range the individual pay may differ depending on additional factors including job responsibilities, job related knowledge, skills, abilities, education, and experience. The hourly pay range shown is subject to change and may be modified periodically. WORKING CONDITIONS: The Plating Process Technician works primarily in an indoor environment on A shift which is Monday thru Wednesday and every other Thursday 6:00 AM to 6:00 PM. The schedule may be altered from time-to-time to meet business or operational needs; may travel from building-to-building as needed. Works in a class 100 ESD sensitive wafer manufacturing facility; wears a cleanroom (bunny) suit, including hood, gloves, safety glasses, booties, and mask. May be exposed to hazardous conditions, chemicals, fumes, and/or gases during the course of work day; Stands and walks; performs various fine grasping movements, bends, and twists; operates a computer and enters information using a keyboard, operates a telephone, and other office equipment. Must be able to load and unload various wet etch chemical solutions several times per shift. May be required to push, pull, or lift up to 25 pounds. *Other duties of a similar nature or level are duties that may be required, but may not be specifically listed in the job description or posting. TDK/Headway Technologies, Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, national origin, age, disability, or genetics. Applicants requiring accommodation in order to complete the application process should contact the Headway Human Resources Department.

Purpose Accountable for basic operation of the site's quality assurance and control program including but not limited to: assisting and supporting all safety, environmental and quality regulations, product testing and adherence to standards, targets and recipes, maintain relevant equipment and calibrations, and decision-making through basic statistical understanding. Key Responsibilities Perform all work in accordance with safety rules and regulations and participate in facility health & safety activities as assigned Use descriptive statistics to identify non-conforming material to site referenced standards and targets Ensure all relevant quality requirements are consistently met according to the QA manual and plant SOPs Ensure that non-conforming product is appropriately quarantined, identified and segregated according to standard procedures Ensure the communication of non-conformance is clear and concise to required parties. Disposition basic non-conforming product as allowed by site Technical Manager. Record testing and inspection results by inputting into appropriate database or spreadsheets while identifying and responding to test results outside of product standards and targets Verify that all product packaging and appearance standards meet site and client expectations. Generate and analyze reports and charts Monitor and document process parameter changes as assigned Communicate test results and observations to operations and management to maintain process and product conformance Monitor and record consumption and inventory of raw materials (wax, resin, etc.). Verify quality of raw materials as required Support preventive and unscheduled maintenance tasks. Assist in process and product tests/trials. Be pro-active in identifying and performing other tasks to maintain and improve safety, quality and environmental performance Demonstrate adherence to process and product SOPs, JSAs, check sheets and other QMS documentation Provide support to team members when a quality issue arises Demonstrate drive and willingness to advance to higher levels of responsibility Perform in a relief capacity for production coordinator Perform other duties as assigned Models company core values Other duties as assigned Required Qualifications Associate's Degree and two years of experience in laboratory work, quality control, or general manufacturing; or an equivalent combination of training, education, and experience Knowledge of and ability to follow all quality and process standards Demonstrated ability to operate a computer and supporting software, to include spreadsheet and statistical packages Working knowledge of manufacturing equipment and production processes Demonstrated ability to operate sample preparation and testing equipment Knowledge of inventory management Excellent verbal and written communication as well as interpersonal skills Proficient math skills and statistical knowledge, including concepts Demonstrated ability to operate a variety of material handling equipment (both hand tools and electrical/motorized equipment) Ability to climb stairs and lift up to 50 pounds Demonstrated ability to work while wearing a respirator and/or other safety clothing or equipment Preferred Qualifications Associate degree in Forest Products, Engineering, Wood Science or related scientific field preferred Three (3) years composite or engineered wood manufacturing experience About Roseburg Forest Products Founded in 1936, Roseburg Forest Products is a privately held company based in Springfield, Oregon. With a legacy in sustainable forestry and innovative wood products manufacturing, we are a leading North American producer of engineered wood, exterior trim, plywood, lumber, and medium density fiberboard (MDF). Our products shape and support homes, workplaces, and industries, while our timberlands protect forest health for future generations and provide high-quality wood fiber for our integrated operations. At Roseburg, we believe in making lives better from the ground up through the products we create, the relationships we build, and the communities we support. Our team of passionate professionals value safety, integrity, and excellence in all we do. From the mill to the forest to the office, you'll find opportunities to grow and contribute to a company that cares for people, communities, and the environment. Learn more about who we are and what we do at ***************** Benefits at Roseburg Roseburg offers a comprehensive and competitive benefits package to support the health, financial security, and well-being of our team members and their families. Key benefits include: Bonus opportunities based on company and individual performance 401(k) with up to 4% company match and 3% automatic company contribution Vacation starting at 3 weeks and 11 paid holidays per year Company-sponsored medical, dental, and vision insurance Company-paid life, AD&D, and long-term disability insurance options Mental health benefits for the entire family, including 8 free annual sessions per person Wellness programs and incentives, including biometric screenings & wellness challenges Paid time away from work for illness or injury, as well as paid parental bonding time Health Savings Account (HSA) with company contributions and Flexible Spending Account (FSA) options Company match for charitable contributions Education assistance and professional development support Financial and retirement counseling Additional voluntary benefits including pet insurance, student loan refinancing, and exclusive scholarships for child dependents, and more! AN EQUAL OPPORTUNITY EMPLOYER INCLUDING DISABILITY AND VETERANS

Purpose Accountable for basic operation of the site's quality assurance and control program including but not limited to: assisting and supporting all safety, environmental and quality regulations, product testing and adherence to standards, targets and recipes, maintain relevant equipment and calibrations, and decision-making through basic statistical understanding. Key Responsibilities Perform all work in accordance with safety rules and regulations and participate in facility health & safety activities as assigned Use descriptive statistics to identify non-conforming material to site referenced standards and targets Ensure all relevant quality requirements are consistently met according to the QA manual and plant SOPs Ensure that non-conforming product is appropriately quarantined, identified and segregated according to standard procedures Ensure the communication of non-conformance is clear and concise to required parties. Disposition basic non-conforming product as allowed by site Technical Manager. Record testing and inspection results by inputting into appropriate database or spreadsheets while identifying and responding to test results outside of product standards and targets Verify that all product packaging and appearance standards meet site and client expectations. Generate and analyze reports and charts Monitor and document process parameter changes as assigned Communicate test results and observations to operations and management to maintain process and product conformance Monitor and record consumption and inventory of raw materials (wax, resin, etc.). Verify quality of raw materials as required Support preventive and unscheduled maintenance tasks. Assist in process and product tests/trials. Be pro-active in identifying and performing other tasks to maintain and improve safety, quality and environmental performance Demonstrate adherence to process and product SOPs, JSAs, check sheets and other QMS documentation Provide support to team members when a quality issue arises Demonstrate drive and willingness to advance to higher levels of responsibility Perform in a relief capacity for production coordinator Perform other duties as assigned Models company core values Other duties as assigned Required Qualifications Associate's Degree and two years of experience in laboratory work, quality control, or general manufacturing; or an equivalent combination of training, education, and experience Knowledge of and ability to follow all quality and process standards Demonstrated ability to operate a computer and supporting software, to include spreadsheet and statistical packages Working knowledge of manufacturing equipment and production processes Demonstrated ability to operate sample preparation and testing equipment Knowledge of inventory management Excellent verbal and written communication as well as interpersonal skills Proficient math skills and statistical knowledge, including concepts Demonstrated ability to operate a variety of material handling equipment (both hand tools and electrical/motorized equipment) Ability to climb stairs and lift up to 50 pounds Demonstrated ability to work while wearing a respirator and/or other safety clothing or equipment Preferred Qualifications Associate degree in Forest Products, Engineering, Wood Science or related scientific field preferred Three (3) years plywood, composite, or engineered wood manufacturing experience About Roseburg Forest Products Founded in 1936, Roseburg Forest Products is a privately held company based in Springfield, Oregon. With a legacy in sustainable forestry and innovative wood products manufacturing, we are a leading North American producer of engineered wood, exterior trim, plywood, lumber, and medium density fiberboard (MDF). Our products shape and support homes, workplaces, and industries, while our timberlands protect forest health for future generations and provide high-quality wood fiber for our integrated operations. At Roseburg, we believe in making lives better from the ground up through the products we create, the relationships we build, and the communities we support. Our team of passionate professionals value safety, integrity, and excellence in all we do. From the mill to the forest to the office, you'll find opportunities to grow and contribute to a company that cares for people, communities, and the environment. Learn more about who we are and what we do at ***************** Benefits at Roseburg Roseburg offers a comprehensive and competitive benefits package to support the health, financial security, and well-being of our team members and their families. Key benefits include: Bonus opportunities based on company and individual performance 401(k) with up to 4% company match and 3% automatic company contribution Vacation starting at 3 weeks and 11 paid holidays per year Company-sponsored medical, dental, and vision insurance Company-paid life, AD&D, and long-term disability insurance options Mental health benefits for the entire family, including 8 free annual sessions per person Wellness programs and incentives, including biometric screenings & wellness challenges Paid time away from work for illness or injury, as well as paid parental bonding time Health Savings Account (HSA) with company contributions and Flexible Spending Account (FSA) options Company match for charitable contributions Education assistance and professional development support Financial and retirement counseling Additional voluntary benefits including pet insurance, student loan refinancing, and exclusive scholarships for child dependents, and more! AN EQUAL OPPORTUNITY EMPLOYER INCLUDING DISABILITY AND VETERANS

Job Purpose and Impact Cargill Animal Nutrition is a global business that serves large-scale feed mill operators and retailers, as well as individual farmers. Our business has provided better nutrition for better lives for more than 120 years. By leading, innovating, and transforming the animal nutrition & health industry, we ensure that the customers we serve, the animals we feed, and the consumers who rely on that protein, thrive. Working at Cargill is an opportunity to thrive - a place to develop your career to the fullest while engaging in meaningful work that makes a positive impact around the globe. We depend on creative, responsible, hardworking individuals like you to operate our business successfully! New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Job Type: Full Time Shift(s) Available: 1st Compensation: $25.00 - 33.00 /hr Depending on Experience Benefits: Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts A Typical Work Day May Include: Completing preventative, predictive, and reactive industrial maintenance throughout the facility, with limited direction. Leverage knowledge and ability to operate 1 or 2 standard maintenance tools such as power tools, basic hand tools, electric tools, precision maintenance tools and preventative maintenance technology tools. Demonstrate experience in 1 or 2 maintenance trades and components (ex. electrical, welding, pipefitting, fabrication, gearbox and bearing maintenance, lubrication, pumps and piping systems, mechanical maintenance, and hydraulic and pneumatic systems). Modify with some direction or instruction in either electrical or mechanical schematics, blueprints, and operation manuals. Document completed work and the conditions found utilizing maintenance computer software and interact regularly with peers and management to pursue continuous improvement of facility operations. Operating forklifts, loaders, scissor lifts, and aerial lifts following standard production documentation to deliver to the correct location. Understanding and adhering to all safety policies and procedures Maintaining a safe and clean work environment Other duties as assigned What You Will Need: Eligible to work in the United States without visa sponsorship Must be 18 years or older Ability to perform physical job duties which may include bending, lifting up to 50lbs, kneeling, climbing, crawling, and twisting, with or without reasonable accommodation Ability to work in varied indoor and outdoor conditions which may include heat, cold, dust, loud noise, etc., with the use of personal protective equipment (PPE) including a respirator Ability to work in elevated areas (4 feet and above) Ability to understand and communicate in English (verbal/written) Ability to work in confined spaces Basic computer skills Ability to work overtime including holidays, nights, weekends, or different shifts with advance notice Demonstrate experience in 1 or 2 maintenance trades and components (ex. electrical, welding, pipefitting, fabrication, gearbox and bearing maintenance, lubrication, pumps and piping systems, mechanical maintenance, and hydraulic and pneumatic systems). What Will Put You Ahead: Experience performing maintenance trades such as rigging systems, bearings, and lubrication. Experience with safe work practices, such as Pre-Job Hazard Analysis (PJHA), confined spaces, job task permitting, etc. Trade school certification or degree in a maintenance related field, or relevant military experience Experience with precision maintenance, such as laser alignment and/or dial indication Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet. To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 155,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Schuyler, NE Job Type: Full Time Shift(s) Available: 2nd Compensation: $32.50/hr - $35.00/hr Benefits Information Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill Matching Contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities May operate heavy machinery (including forklift) or computer programs Use a variety of tools and retrieve parts Conduct daily set-up of area Troubleshooting Working around or with machinery and power sources such as electricity Ensuring safety, food safety and quality Cleanliness and housekeeping Maintaining a safe working environment Required Qualifications Must be eligible to work in the United States without visa sponsorship Must be 18 years or older Able to read, write and speak English Knowledge of basic tools and maintenance related subjects Willingness to participate on various teams such as HAZMAT Preferred Qualifications * Computer skills * Previous experience in maintenance Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

What will you be doing? Preventative maintenance and repair of mechanical, electrical, and Habasit specific equipment. 's opportunities: Direct hire opportunity Eligible for bonuses and incentives $500 bonus after 90 days of employment $500 additional bonus after 180 days of employment $1000 additional bonus after 365 days of employment $750 referral bonus after 6 months Qualifications Must be 18 years of age Must be cleared on any background screening English literacy High School Degree or GED Maintenance Experience (Trade School, Previous Employment, Certificates, etc.) High Competency of pneumatic and hydraulic components Knowledge of Basic Electrical / Electronic Circuits and Wiring Read and understand Mechanical Blueprints Ability to use a calculator and a tape measure. Intermediate computer skills. Must have working knowledge of OSHA safety requirements. Knowledge and/or skills for Metal Fabrication (Mig, Tig, Grinders, Saws, Tap-n-Die, etc.) Why should you join our team? Our amazing environment keeps safety as its top priority! You can enjoy a collaborative atmosphere in a clean and climate-controlled facility. Our core values is how we thrive, and you will get to work with people who share them: Organizational Pride, Highest Ethical Standards, Quality You Can Trust, Collaboration, Entrepreneurship, and Continuous Improvement. Our opportunities to advance give any qualified associate the opportunity to move to a higher-level job. Our on-the-job training and skills development will ensure your success in your job. Our competitive pay rate $28.00/Hr - $33.00/HR If you are interested in becoming a part of a World-Class Team, submit your application today! OVERVIEW OF POSITION: Repairs equipment and programs PLC's, including automated machines, controls, panels, relays, circuit breakers, communication systems and alarms. Installs electrical equipment with minimal instructions. FIRST SHIFT IS MANDATORY FOR THE FIRST 6 MONTHS OR UNTIL TRAINING IS COMPLETED. RESPONSIBILITIES OF THIS POSITION: Level 1 Duties · Operate electrical hand tools as well as voltage, ampere and temperature measuring devices. · Work from blueprints, drawings, sketches or layouts. · Diagnose problems in order to replace or repair parts/machinery as required. · Operate and maintain basic Maintenance Department equipment and machinery. · Perform scheduled preventive maintenance as directed. · Troubleshoot and repairs equipment. · Assemble, fabricate and install parts, equipment and machinery. · Notify maintenance management of any abused and or misused equipment and/or machinery. · Notify maintenance management of shortage of supplies. · Participate in problem solving teams. · Follow all housekeeping and safety regulations. · Fill out necessary paperwork. (eMaint program, RMA documentation, Tool Repair, etc.) · Manage assigned workload and prioritize to minimize productivity losses. · Perform Lockout / TagOut procedures as a Habasit "Authorized Associate". · Assist other maintenance personnel. · Perform janitorial duties as directed. (Housekeeping, machine cleaning, facility cleaning, etc.) · Perform snow removal. · Perform grounds keeping tasks as directed. · Is on call to come to work during off shift hours to help out in emergency situations. · Any other duties as assigned. Level 2 Duties · Perform complex wiring assignments. · Install and repair power, lighting, and electronic control circuits. · Provide technical assistance to lower level maintenance electricians. · Improve and maintain preventative maintenance program for Habasit assets. · Repair and maintain equipment as needed and/or as directed by PM schedule. · Ability to program PLC in Siemens and Allen Bradley format. · Maintain OSHA compliance and records for site and equipment. · Work with vendors to produce parts for machines and maintain spare part inventory. · Maintain building and all maintenance contracts, such as cleaning services, landscaping, etc. · Install any additional utility extensions and networking services. · Any other duties as assigned. COMPETENCIES/SPECIFIC EXPERIENCE OR TRAINING PREFERRED: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements/preferences listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · Required - High School Degree or GED · Required - Maintenance Experience (Trade School, Previous Employment, Certificates, etc.) · Required - High Competency of pneumatic and hydraulic components · Required - Knowledge of Basic Electrical / Electronic Circuits and Wiring · Required - Read and understand Mechanical Blueprints · Required - Read, Write and Comprehend English. · Required - Minimum of five years maintenance experience/preventative maintenance program facilitator. · Required - Program PLC in both Siemens and Allen Bradley format. · Preferred - Knowledge and/or skills for Metal Fabrication (Mig, Tig, Grinders, Saws, Tap-n-Die, etc.) · Preferred - Associates Degree in Related Field. · Preferred - Intermediate computer skills. · Preferred - OSHA electrical certification. · Preferred - Must have working knowledge of OSHA safety requirements. · Required - Ability to use a calculator and a tape measure. Education: High school or equivalent (Required) Experience: Industrial maintenance: 5 years (Required) Mechanical knowledge: 5 years (Required) pneumatics: 5 years (Required) Hydraulics: 5 years (Required) Electrical wiring: 5 years (Preferred)

ParkDecoratorsfabricatedecorationsandsetsfortheKnott'sBerryFarmresort,Knott's Berry Farm Hotel and Soak City For the various seasonal events throughout the year.As well as decorate restaurants, rides and merchandise locations on the resort. Park Decorator roles may include and is not limited to one of the following positions: Window Display Designer/Installer, Floral Design, Scenic Painting, or Seasonal Holiday Decorator. Salary Details: $26.86 / hr Responsibilities: Daily inspection and Maintenance of Permanent installations of theresort. Daily inspection of Current seasonal dcor installed in theresort. Fabricate new dcor for seasonal events. Refurbish existing dcor for seasonal events. Inventory andmaintainshop. Install dcor for seasonal events. Strike dcor for seasonal events. Qualifications: High school diploma / GED required. Associate's degree / vocational or technical school degree, emphasis in Theatrical Design/visual Display preferred. At least 1-2 years of prior, relevant work experiencepreferred. User of basic hand toolsand power tools,gluesand adhesives.Floral design helpful.Ability to sketch and convey design concepts. Basic Scenic painting skills preferred. Must be able to work nights, weekends, and holiday based on business needs.

Summary / Objective: Performs general mechanical maintenance work in the Plant in accordance with DAIKIN and OSHA safety Standards and procedures. Maintain, inspect, troubleshoot, repair, and overhaul installed and portable plant production and facility equipment, including rotating equipment, process equipment and other types of equipment as required for effective plant operation. Ability to operate lifting and carrying equipment for the facility. Performs pipefitting and welding duties as assigned by supervision. Qualifications: High school diploma, or equivalent. Computer skills in Microsoft Office programs. Knowledge or willing to learn daily work information input into Computer Maintenance Management System (CMMS). Minimum five years of experience in mechanical trade. Minimum two years of experience in maintenance / manufacturing. Preferred Applied Technology Degree - Industrial Maintenance (Mechanical). Desired experience with the following: Pumps, piping, Machining, millwright, welding, and fitting. Competencies: Effectively use precision measuring tools. Apply oxyfuel cutting techniques, as required. Understand and follow all safety procedures as they pertain to the job. Understand and follow all Maintenance procedures. Basic understanding of plant chemical processes. Be able to interpret P&ID's. Have general maintenance knowledge to perform minor repairs, replacing gaskets, piping, valves, etc. Physical Demands: Capable of lifting 50 lbs. Have good mobility. Be able to work for 12 hours in all weather. Willing to work overtime as plant needs dictate. Walk through the plant, approximately 2-3 miles per day. Climb the stairs of a 120' structure. Cannot be afraid of heights. Have good hearing and sense of smell. Work in potentially stressful environments. Able to work in an acid suit, as required. Able to work in a full-face respirator. Typical Duties / Responsibilities: Prompt, regular, and dependable attendance is an essential function of this job. Observe and follow all DAIKIN, OSHA and NFPA safety rules and procedures, including wearing required personal safety equipment (PPE). Identify hand tools, fasteners and equipment used in the trade and distinguish their application. Apply basic layout principles, blueprint reading and master intermediate trade math. Identify appropriate gaskets and O-rings according to their application. Set base plates and soleplates. Install packing and seals (including mechanical seals). Remove and install bearings and couplings. Fabricate shims. Pre-align and install equipment. Install belt and chain drives, fans, and blowers. Identify parts of a conveyor and their use. Identify and master hand, power tools, and equipment, including equipment for rigging and their procedures. Identify and install above, underground, and specialty piping, hangers and supports, valves and inline specialties. Execute daily Maintenance plan and any special analysis needed. Accurately prepare check sheets, log sheets, daily summaries, etc. Repair and preventive maintenance of equipment. Maintain area housekeeping in the Maintenance area. Generate and/or manage hazardous waste, as required. Attending meetings as required, including shift exchanges. Complete incident reports, as required. Perform daily inventories and special inventories, as required. Perform weekly and monthly checks. Accurately prepare time sheets. Additional assignments as deemed necessary by management.

Bridgestone Retail Operations (BSRO) is part of Bridgestone Americas and employs over 22,000 teammates in North America. BSRO operates more than 2,200 company-owned stores, including Firestone Complete Auto Care, Tires Plus and Wheel Works locations. With locations across North America and more than $4.5 billion in tire and auto service sales, Bridgestone Retail Operations is the right place to build a career. Whatever role you fill, when you represent the Bridgestone name, you are a valued teammate, and part of our larger mission to Serve Society with Superior Quality. We start by offering each teammate more than just competitive pay. We provide formal training, performance incentives, paid vacation and holidays, competitive healthcare packages for full-time and part-time employees, and a 401k plan to help build towards your future. We believe people can only provide superior service and quality to others when they are allowed to bring their whole self to work and know they are supported. We believe in championing all perspectives, individuals and teams because we understand the importance of seeing the world and our business through many different lenses. We are building a team as diverse as the world we serve. So, show us what you are made of. Show us the smart stuff, the tough stuff, the bold, beautiful and brave stuff. Because who you are is what we need. **Job Category** Retail **Position Summary** The Maintenance Technician is an entry level position in which you will be an integral part of a fantastic team servicing vehicles. STOP looking for a job and START investing in your career as a Maintenance Technician at Firestone Complete Auto Care! Full and Part-time benefits available from day one - including tool program discounts! Pay Range: $12.54 - $18.81 **Responsibilities** + Learn how to diagnose and repair basic automotive including brakes, alignments, suspensions, cooling, exhaust, and electrical. + Change oil and/or perform scheduled maintenance services. + Install and perform tire maintenance. + Install batteries, shock absorbers, and check electrical systems. + Road test vehicles. **Minimum Qualifications** + Ability to learn basic mechanical tasks. + Must have a valid automobile driver's license at all times and be able to drive customer and company vehicles. + Experience in automotive service industry preferred. + Reading, writing, and math skills. **OUR CREW KNOWS** **BENEFITS** + Medical, Dental and Vision - Starting day 1 for all our teammates + Paid vacation and holidays + On-the-job training and company-funded ASE certifications + Flexible work schedule + 401(k) match + On demand pay (daily pay) program available **OUR VALUES GIVE BACK TO** **YOU** + Professional Development: No matter where you're at in your career, we've got the resources to help you level up. + Community Involvement: We pride ourselves on working with our local communities and giving back where we can. + Integrity & Teamwork: Part of what makes our teams different is our drive to do things right, always, together. **At Bridgestone, you are Free to Be** We believe people can only provide superior service and quality to others when they bring their whole self to work. We believe in championing all perspectives, individuals and teams because we understand the importance of seeing the world and our business through many different lenses. We are building a team as diverse as the world we serve. So, show us what you are made of, because who you are is what we need. **What we offer** At Bridgestone, what really matters is to foster co-creation opportunities and empowering you to be creative and curious to make mobility safer, more efficient, and more sustainable for future generations. Whatever role you fill, when you represent Bridgestone, you are a valued teammate, and part of our larger mission to "Serve Society with Superior Quality", for that, we offer you more than just a competitive compensation; we will provide you: + A supportive and engaging onboarding experience to ensure a smooth transition into our team. + The opportunity to develop and grow, through training and regular mentorship. + Corporate Social Responsibility activities. + A truly global, dynamic and challenging work environment. + Agility and work/life effectiveness and your long-term well-being. + A diverse and inclusive team. _Bridgestone is proud to be an Equal Employment Opportunity employer. It is our policy to consider for employment all individuals regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, gender, sex, sexual orientation, gender identity and/or expression, genetic information, veteran status, or any other characteristic protected by federal, state or local law._ **Employment Eligibility** If hired, a Form I-9 Employment Eligibility Verification must be completed at the start of employment. Temporary work authorization or the need for sponsorship may disqualify you from employment.

Calgon Carbon | A Kuraray Company is growing - and so can your career. Be part of a global leader in environmental solutions, where your work directly impacts the quality of air and water around the world. Production Technician - NIP Location: Neville Island Plant - Pittsburgh, PA Excellent Benefits : Medical, dental, vision and retirement savings (401k) Hourly pay: $29.150 Schedule: 12 Hour Rotating Shift This plant is in continuous operation, 24 hours per day, and seven days per week. Working 12 hours shifts is required. Production technicians will operate and control manufacturing equipment and heavy machinery according to safety, environmental and health procedures and regulations; they will monitor product quality and physically inspect equipment. They may also work in packaging and warehouse areas. Duties and Responsibilities (not limited to) Participate fully in safety, quality, team and other programs, including training (formal and informal) to improve technical and personal development and performance. Interface with other plant operation teams, maintenance, administrative and staff employees, as well as outside contractors and vendors when necessary. Accurately perform all plant quality testing and paperwork to include process data logs, area operating log sheets and personnel records. Maintain work areas in a neat, orderly manner to assure the conditions are acceptable to good housekeeping and safety standards. Work overtime when necessary and perform all other related duties to insure the successful operations of the Neville Island Plant. Qualifications High School Diploma/GED is required. Candidates must be 18 years old. Must be able to successfully complete a medical examination, drug test and background check. Must be able to read and write in English. Written operating manuals will be extensively used. Most communication will be in writing. United States Citizenship or Permanent Residents status due to government regulations covering export controlled products/processes. All employees must be safety and quality conscious. Must be physically able to lift and carry 50 pounds and climb industrial ladders. Must be able to be certified to safely operate a fork truck. Previous experience in a manufacturing environment is preferred. About Calgon Carbon At Calgon Carbon, we are scientific innovators with a proud legacy of over 80 years and more than 205 patents to our name. Since pioneering the first activated carbon products from bituminous coal in the 1940s, we've been at the forefront of developing cutting-edge technologies and solutions to meet the world's evolving air and water purification needs. Today, our portfolio includes more than 700 direct market applications across a wide range of industries. Headquartered in Pittsburgh, Pennsylvania, Calgon Carbon employs approximately 1,685 professionals and operates 20 facilities worldwide dedicated to manufacturing, reactivation, innovation, and equipment fabrication. In Europe, we operate under the name Chemviron. In March 2018, Calgon Carbon became part of the Kuraray Group. Together, we offer complementary products and services, united by a shared commitment to delivering the highest quality and most innovative activated carbon solutions to customers around the globe. Calgon Carbon is an Equal Opportunity Employer, including disabled/veteran

Calgon Carbon | A Kuraray Company is growing - and so can your career. Be part of a global leader in environmental solutions, where your work directly impacts the quality of air and water around the world. Production Technician - NIP Location: Neville Island Plant - Pittsburgh, PA Excellent Benefits: Medical, dental, vision and retirement savings (401k) Hourly pay: $29.150 Schedule: 12 Hour Rotating Shift This plant is in continuous operation, 24 hours per day, and seven days per week. Working 12 hours shifts is required. Production technicians will operate and control manufacturing equipment and heavy machinery according to safety, environmental and health procedures and regulations; they will monitor product quality and physically inspect equipment. They may also work in packaging and warehouse areas. Duties and Responsibilities (not limited to) Participate fully in safety, quality, team and other programs, including training (formal and informal) to improve technical and personal development and performance. Interface with other plant operation teams, maintenance, administrative and staff employees, as well as outside contractors and vendors when necessary. Accurately perform all plant quality testing and paperwork to include process data logs, area operating log sheets and personnel records. Maintain work areas in a neat, orderly manner to assure the conditions are acceptable to good housekeeping and safety standards. Work overtime when necessary and perform all other related duties to insure the successful operations of the Neville Island Plant. Qualifications High School Diploma/GED is required. Candidates must be 18 years old. Must be able to successfully complete a medical examination, drug test and background check. Must be able to read and write in English. Written operating manuals will be extensively used. Most communication will be in writing. United States Citizenship or Permanent Residents status due to government regulations covering export controlled products/processes. All employees must be safety and quality conscious. Must be physically able to lift and carry 50 pounds and climb industrial ladders. Must be able to be certified to safely operate a fork truck. Previous experience in a manufacturing environment is preferred. About Calgon Carbon At Calgon Carbon, we are scientific innovators with a proud legacy of over 80 years and more than 205 patents to our name. Since pioneering the first activated carbon products from bituminous coal in the 1940s, we've been at the forefront of developing cutting-edge technologies and solutions to meet the world's evolving air and water purification needs. Today, our portfolio includes more than 700 direct market applications across a wide range of industries. Headquartered in Pittsburgh, Pennsylvania, Calgon Carbon employs approximately 1,685 professionals and operates 20 facilities worldwide dedicated to manufacturing, reactivation, innovation, and equipment fabrication. In Europe, we operate under the name Chemviron. In March 2018, Calgon Carbon became part of the Kuraray Group. Together, we offer complementary products and services, united by a shared commitment to delivering the highest quality and most innovative activated carbon solutions to customers around the globe. Calgon Carbon is an Equal Opportunity Employer, including disabled/veteran

The future. Its on you. You & Golden Aluminum. We are a continuous casting aluminum rolling mill who established operations in 1984 and located in Fort Lupton Colorado, 35 miles north of downtown Denver. We care about our environment, our people, and our community. Were honored to be selected by the Department of Energy to receive up to$22.3 million in investment supporting our Nexcast Mini Mill and other breakthrough projects which will steer the aluminum industry toward a greener, decarbonized future. Production Technician Benefits: · $20+ per hour (Dependent on Qualifications) · Up to $1,200 quarterly bonus · $3 per hour night shift differential · 401k Company Match · Medical, dental, vision, life and disability insurance with generous company contributions to your Health Savings Account · Gym membership reimbursement · Work schedule that offers 3-day weekend every other week Production Technician Job Summary: Production Technicians are responsible for the daily operation of heavy, moderately complex foundry equipment in a manufacturing environment. Production Technicians work on a variety of equipment including: presses, mills, casters, shredders, ovens, annealers, and/or slitters. Production Technician duties include: · Adherence to all safety protocols · Responsible for ensuring that product is continuously flowing while visually inspecting to ensure quality standards and customer specifications are met. · Operating forklifts · Monitoring machine calibrations and adjusting as required · Set up and tear down machines safely · Maintain Quality control levels as set by Golden Aluminum. · Read and interpret documents such as safety rules, operating manuals and procedures. Production Technicians need to: · Pass pre-employment drug test based on federal law (includes marijuana). · Work any shift (2x2x3 schedule), 12 hours per shifts, alternating day/nights every 6 weeks. · Have basic Microsoft computer skills and possess basic/fundamental math skills. · Work efficiently with minimal supervision. · Have strong attention to detail identifying defects and suggesting corrections. · Physically able to lift, carry and move up to 50 lbs. · Forklift experience is a plus. Because Golden Aluminum thrives on the power of diversity and is committed to an inclusive environment where every individual can thrive through a sense of belonging, respect, and contribution, we are committed to giving every qualified applicant and employee an equal opportunity. PIb292402b2d99-31181-39540902

Who is Anatomage? Founded in 2004, Anatomage is a world-leading health care technology company. Anatomage offers 3D medical imaging software and hardware for diagnosis, treatment planning, customized surgical devices, and anatomy education in both the dental and medical industries. About the Role As a Production Technician at Anatomage, you will be working in our Table Production department with a small team of technicians that assemble and manufacture our life-sized virtual dissection tables. Anatomage is growing at a rapid pace and we need Production Technicians to help support the increasing demand for our unique products. This person will be an integral part of that team, working onsite at our warehouse location in San Jose to produce the Anatomage Table. The ideal candidate has previous computer and/or assembly experience. This person must have strong attention to detail, comfort lifting heavy products, and enjoy assembly production. This is the perfect opportunity for someone looking to witness our technological products be created from start to finish and be part of a close-knit team. This role is $24/hr. What You'll Do Assemble hardware products in our production line Employ high standards of assembly work to ensure high quality products are being produced on schedule Quality assurance of our in-house table application software Maintain organized and safe work environment Fundamental computer navigation, installation, and troubleshooting Follow proper inventory protocol with accuracy Miscellaneous duties as needed Requirements Great attention to detail Strong organizational skills Verbal and written communication skills Able to lift up to 45 lbs without assistance on a regular basis Ability to work efficiently and effectively with minimal supervision Qualities We Look For 1-3 years in computer assembly preferred Experience using small hand tools/power tools Ability to collaborate well on a team Ability to manage and prioritize multiple tasks with competing demands Minimum Education and Experience Required High School Diploma or GED equivalent 1+ year of full time work experience Physical Requirements Climbing, stooping, kneeling, crouching, standing, walking, reaching with hands and arms, grasping and feeling with fingers and palm, talking, hearing, and performing repetitive motions Ability to push, pull, lift, and/or carry up to 45 pounds without assistance Ability to utilize close visual acuity to perform visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes Benefits What We Offer Health, Dental, and Vision care for you and your family 401K savings plan with employer matching Generous PTO leave and paid holidays Fun, casual and blooming culture Team bonding activities, catered lunches, free snacks and more when we return back to our office! About Anatomage Anatomage has been financially robust and growing for 15 consecutive years. Doctors world-wide have enthusiastically responded to the company's products, making us a market leader and setting the industry standard. Currently, thousands of clinics and hospitals use Anatomage's software for patient diagnosis and treatment planning. Leading radiology equipment companies use Anatomage's software as a key component in their systems. Anatomage offers the world's first and only life-sized virtual dissection table. Students can learn anatomy and physiology using highly interactive and accurate real human-based digital data. Institutions can offer high quality education without worrying about chemicals, facility costs, and regulatory issues. Hundreds of schools have adopted the Anatomage Table as the main teaching tool for students. At Anatomage, there is an opportunity to work alongside the best in the field. With a diverse group of people from various technical, clinical, and artistic backgrounds, Anatomage provides a culture where distinguished individuals can work and collaborate in an organic manner. Our team members all bring unique strengths and talents to their group and embrace each other's diverse perspectives. Anatomage offers a distinct work experience with an exceptional opportunity to develop careers. Our philosophy is to foster a dynamic work environment, and we are proud to let our employees' knowledge and responsibilities grow with the company. In the U.S., the standard base pay range for this role is $25.00 per hour. This base pay range is for the U.S. and is not applicable to locations outside of the U.S.. Actual amounts will vary depending on experience, performance and location. In addition to a competitive base pay, employees in this role may be eligible for incentive compensation. Incentive compensation is not guaranteed. Anatomage is an Equal Employment Opportunity employer. We do not offer H1B Sponsorship at this time. Local candidates preferred. Fraud Recruitment Disclaimer It has come to our notice that fraudulent and fictitious job opportunities are being circulated on the Internet. Prospective candidates are being contacted by certain individuals, mainly through telephone calls, emails and correspondences, claiming they are representatives, subsidiaries or under contract with Anatomage, Inc., and, thus, pretending to represent Anatomage. The main purpose of these correspondences and announcements is to obtain privileged information from individuals, or to induce people to pay a fee for services related to recruitment or training or a new role. Anatomage does not: Send job offers from free email services like Gmail, Yahoo mail, Hotmail, etc.; Request payment of any kind from prospective candidates for employment or any sort of fees; Authorize anyone to either collect money or arrive at any monetary arrangement in return for a job at Anatomage; and Request or require personal documents like bank account details, tax forms or credit card information as part of the recruitment process. Legitimate emails ******************* domains are from the organization, anything outside of the stated domain is likely a scam and fraudulent email. If you have received an offer from any domain other *******************, it is likely a scam and not a legitimate offer. Please do not provide any personal information to the imposters posing as recruiters or the HR manager of Anatomage, Inc. We recommend blocking and reporting their accounts for unauthorized and fraudulent behaviors.

As a Production Technician, you will play a vital role in a team of Operations professionals building inflight connectivity solutions connecting aircraft to harnessing the true power of inflight internet to improve how passengers fly and airlines operate. We bring flexibility and performance to airlines and passengers alike across every device, every flight, everywhere. Production Technicians perform functions associated with all manufacturing operations, including working with engineers in set-up and calibration tasks, as well as performing rework and quality testing related to the production of parts, components, subassemblies, and final assemblies. Uses sophisticated programs to collect and evaluate operating data to conduct in-line adjustments to products, instruments, or equipment. Production Technicians performs in-house servicing and repair of company products at established company repair site or service center. Diagnoses mechanical, hardware, software and systems failures using established procedures. Performs maintenance, testing and calibration of repaired products. Prepares reports for analysis of product failure trends and service ability issues. PRIMARY RESPONSIBILITIES / KEY RESULT AREAS General Focus: * Demonstrate a continuous improvement mindset and provide feedback on the production floor. * Collaborate with and contribute to continuous improvement projects. * Recognize and act accordingly to differences between production and rework processes and units. * Understand and assist with any inventory transactions and data recording required for Intelsat's products. * Assist with physical inventory requirements as required. Manufacturing Focus: * Learn, understand, and use the processes and procedures for producing products. * Assist with the timely completion of manufactured assemblies while maintaining the highest quality levels of workmanship. * Demonstrate a basic understanding for electro-mechanical assemblies and corresponding systems. * Assist in the provisioning of products to prepare them for testing. * Inspect and test, per required Manufacturing Test Procedure (MTP) or Manufacturing Work Instructions (MWI) to finalize a high-quality product. * Assist with troubleshooting of failed product to determine the failed sub-component. * Assist with maintaining AS9100 production test requirements and certification. Repair Focus: * Learn, understand, and use the processes and procedures for troubleshooting and repairing products. * Recognize and act accordingly to differences in processes between customer and Gogo owned units. * Able to assemble/disassemble, repair or replace subassemblies and/or assemblies to produce an acceptable product without damage to components or assemblies. * Assist in the testing of customer-returned products. * Assist with the timely completion of quotation and repair phases while maintaining the highest quality levels of workmanship. * Diagnosis, test, maintain, and repair product subassemblies and/or assemblies to produce an acceptable product without damage to components or assemblies. * Inspect and test, per required Manufacturing Test Procedure (MTP) or Manufacturing Work Instructions (MWI) to finalize a high-quality product. * Maintains records of troubleshooting and repairs * Operate Test Stations for diagnostic and testing purposes. Applies knowledge of functional operation of electronic units and systems to diagnose cause of malfunction. COMPETENCIES * Organization & Time Management Skills * Strong Interpersonal & Communication Skills * Demonstrate a continuous improvement mindset and provide feedback. QUALIFICATIONS & EXPERIENCE * Minimum of a high school diploma * 3-5 years of related aerospace experience. * AS9100 Experience OTHER KEY REQUIREMENTS * Prior experience working on IFE/IFC hardware. * Skills in PowerPoint, Excel, Outlook SES and its Affiliated Companies are committed to providing fair and equal employment opportunities to all. We are an Equal Opportunity employer and will consider all qualified applicants for employment without regard to race, color, religion, gender, pregnancy, sex, sexual orientation, gender identity, national origin, age, genetic information, protected veteran status, disability, or any other basis protected by local, state, or federal law. For more information on SES, click here.

Help grow a safer, cleaner, healthier future for everyone, every day. Job Title: Technical Production Operator FLSA Status: Hourly (non-exempt) Level: Operator Level 2 Key Responsibilities: Assembly Assemble and solder electronic components for gas leak detectors with precision, following schematics and IPC standards. Use hand tools, soldering equipment, and small parts to assemble the product to exact specifications. Operate and calibrate specialized tools and test equipment. Testing & Troubleshooting Diagnoses and troubleshooting assembly and performance issues, making necessary adjustments or repairs. Collaborate with engineering and quality teams to resolve recurring issues and refine processes. Quality Assurance Conduct quality inspections at various stages of the assembly process, ensuring each product meets company and regulatory standards. Document assembly activities, test results, and any defects found during testing or assembly. Perform in-process inspections and identify quality issues proactively. Process & Safety Compliance Follow ISO-certified manufacturing processes and adhere to all safety guidelines. Support root cause analysis and suggest process improvements Participate in periodic ISO audits and continuous improvement initiatives. Team Collaboration Collaborate with engineering or quality teams to resolve technical issues Communicate effectively with supervisors and cross-functional teams about production status, equipment needs, and improvement opportunities. Required Skills & Qualifications: High school diploma or equivalent; technical certification or vocational training in electronics or assembly preferred. Minimum 2 years of experience in an assembly or manufacturing environment, preferably in electronics or small devices. Ability with hand tools, soldering, and testing equipment. Ability to read technical drawings and schematics Basic understanding of electrical systems and calibration procedures, Familiarity with ESD protocols and IPC standards a plus. Strong attention to detail and commitment to quality. Initiative-taking approach to finding and solving problems. Physical Requirements: Ability to sit for extended periods and perform repetitive tasks. Manual dexterity for handling small parts and precise assembly work. Ability to lift to 25 lbs. regularly. Additional Requirements: Willingness to work in a collaborative, fast-paced production environment. Ability to adapt to changing production demands and work overtime as needed. Work Schedule: Hourly position 40-hour work week 8-hour shift, longer hours when needed Monday to Friday, 6:00am to 2:30pm Equal Opportunity Employer: Sensit is committed to providing a workplace free from discrimination or harassment. We expect every member of the Sensit team to do their part to cultivate and support an environment where everyone can feel included and is afforded the respect and dignity they deserve. Decisions related to hiring, compensating, training, evaluating performance, or terminating are made fairly, and we give equal employment opportunities to all qualified candidates and employees. We strive to create an inclusive environment that makes every employee and candidate feel welcome. At-Will Employment: Employment with Sensit is at-will and may be terminated by either party at any time, with or without cause or notice. Pre-employment screening is part of our application process. Must be authorized to work in the U.S. To find out more about Sensit Technologies LLC, visit us at ***************************************** Not the right fit? Let us know you're interested in a future opportunity by clicking Introduce Yourself in the top-right corner of the page or create an account to set up email alerts as new job postings become available that meet your interest!

We are hiring a Powder Formulation Technician. The Powder Formulation Technician will be responsible for formulation of powdered media. 1st shift - 5am - 1:30 pm At FUJIFILM Biosciences, we turn curiosity into breakthroughs that advance the field of life sciences. By offering a comprehensive portfolio of products and services in cell culture media, discovery research reagents, recombinant growth factors and proteins, fine chemicals, and critical assay materials, we partner with the brightest minds in biotech and pharma to tackle the world's biggest health challenges. Imagine being part of a team that enables life-changing discoveries like new vaccines, therapies, and advancements in regenerative medicine. Our culture fosters curiosity, collaboration, and innovation, and we pride ourselves on delivering unparalleled quality and service to our partners. If you're ready to make an impact, your future belongs with us at FUJIFILM Biosciences. Our headquarters in Santa Ana, California, is surrounded by world-class schools, lush parks, and scenic beaches like Laguna and Huntington, making it an ideal place to live, work, and explore. With additional campuses across the US, Europe, China, and Japan, we offer opportunities to make a difference worldwide. Fujifilm is globally headquartered in Tokyo with over 70,000 employees across four key business segments of healthcare, electronics, business innovation, and imaging. We are guided and united by our Group Purpose of "giving our world more smiles." Visit: *************************************************** Job Description Responsibilities: * Formulates Powder media formulas per manufacturing protocols utilizing various weighing equipment such as scales and balance. * Uses Mettler-Toledo IND780 terminal system in conjunction with the SAP ERP system to ensure correct raw materials assigned in the batch record are weighed at the specified quantity. * Suggest changes in departmental procedures and processes (SOPs) as needed. * Performs and documents line clearance at the start of each formulation event. * Maintains all required logs and associated documentation. * Assures that all chemicals are stored and labeled properly. * Performs process scale checks on all required equipment including scales and balances. * Keeps work area, utensils, tanks, mills, and equipment clean and organized. * Ensures that supplies needed such as weigh boats, gloves, lab coats, etc. are well stocked in their designated areas. Orders supplies or informs Lead/Supervisor if supplies need to be ordered. * Follows all safety procedures and works in a safe manner including wearing all required personal protective equipment. * Understands and follows procedures to ensure that chemicals are handled properly. * Good understanding of metric system and its conversions. * Follows and actively participates in sustaining the 6S program in the area. * Other duties as requested by Lead or Supervisor. Required Skills/Education: * High School Diploma or equivalent. * Good work history. * Background in medical devices, diagnostics, food/vitamin processing, or pharmaceuticals. * 1-2 years of hands on experience * General education about chemicals and proper handling (college level science preferred). * Working knowledge of metric system. * Good understanding of current Good Manufacturing Practices (cGMPs). * Ability to speak, read, and write English. * Good oral and written communication skills. Salary and Benefits: * For California, the base salary range for this position is $19.65 - $25.51 per hour. Compensation for the successful candidate will depend on various factors (e.g., qualifications, education, prior experience, location, etc.). * Medical, Dental, Vision * Life Insurance * 401k * Paid Time Off * #LI-onsite EEO Information Fujifilm is committed to providing equal opportunities in hiring, promotion and advancement, compensation, benefits, and training regardless of nationality, age, gender, sexual orientation or gender identity, race, ethnicity, religion, political creed, ideology, national, or social origin, disability, veteran status, etc. ADA Information If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to our HR Department (*****************).

We are hiring a Powder Formulation Technician. The Powder Formulation Technician will be responsible for formulation of powdered media. 3rd Shift: 9:00 pm- 5:30 am At FUJIFILM Biosciences, we turn curiosity into breakthroughs that advance the field of life sciences. By offering a comprehensive portfolio of products and services in cell culture media, discovery research reagents, recombinant growth factors and proteins, fine chemicals, and critical assay materials, we partner with the brightest minds in biotech and pharma to tackle the world's biggest health challenges. Imagine being part of a team that enables life-changing discoveries like new vaccines, therapies, and advancements in regenerative medicine. Our culture fosters curiosity, collaboration, and innovation, and we pride ourselves on delivering unparalleled quality and service to our partners. If you're ready to make an impact, your future belongs with us at FUJIFILM Biosciences. Our headquarters in Santa Ana, California, is surrounded by world-class schools, lush parks, and scenic beaches like Laguna and Huntington, making it an ideal place to live, work, and explore. With additional campuses across the US, Europe, China, and Japan, we offer opportunities to make a difference worldwide. Fujifilm is globally headquartered in Tokyo with over 70,000 employees across four key business segments of healthcare, electronics, business innovation, and imaging. We are guided and united by our Group Purpose of "giving our world more smiles." Visit: *************************************************** Job Description Responsibilities: * Formulates Powder media formulas per manufacturing protocols utilizing various weighing equipment such as scales and balance. * Uses Mettler-Toledo IND780 terminal system in conjunction with the SAP ERP system to ensure correct raw materials assigned in the batch record are weighed at the specified quantity. * Suggest changes in departmental procedures and processes (SOPs) as needed. * Performs and documents line clearance at the start of each formulation event. * Maintains all required logs and associated documentation. * Assures that all chemicals are stored and labeled properly. * Performs process scale checks on all required equipment including scales and balances. * Keeps work area, utensils, tanks, mills, and equipment clean and organized. * Ensures that supplies needed such as weigh boats, gloves, lab coats, etc. are well stocked in their designated areas. Orders supplies or informs Lead/Supervisor if supplies need to be ordered. * Follows all safety procedures and works in a safe manner including wearing all required personal protective equipment. * Understands and follows procedures to ensure that chemicals are handled properly. * Good understanding of metric system and its conversions. * Follows and actively participates in sustaining the 6S program in the area. * Other duties as requested by Lead or Supervisor. Required Skills/Education: * High School Diploma or equivalent. * Background in medical devices, diagnostics, food/vitamin processing, or pharmaceuticals. * 1-2 years of hands on experience * General education about chemicals and proper handling (college level science preferred). * Working knowledge of metric system. * Good understanding of current Good Manufacturing Practices (cGMPs). * Ability to speak, read, and write English. * Good oral and written communication skills. Salary and Benefits: * For California, the base salary range for this position is $19.65 - $25.51 per hour. Compensation for the successful candidate will depend on various factors (e.g., qualifications, education, prior experience, location, etc.). * Medical, Dental, Vision * Life Insurance * 401k * Paid Time Off * #LI-onsite EEO Information Fujifilm is committed to providing equal opportunities in hiring, promotion and advancement, compensation, benefits, and training regardless of nationality, age, gender, sexual orientation or gender identity, race, ethnicity, religion, political creed, ideology, national, or social origin, disability, veteran status, etc. ADA Information If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to our HR Department (*****************).

At Panduit, we don't just offer a job - we offer a career where your contributions directly impact our customers, the environment and our company's success. You'll have the opportunity to grow, innovate, and be a part of an inclusive team that celebrates both individual and collective achievements. If you're ready to elevate your career and help us deliver exceptional experiences to our customers, apply today and make your mark with Panduit! Ready to take your technical skills to the next level? Join us as a Sr. Production Technician and be at the forefront of advanced manufacturing! The Sr. Production Technician operates, troubleshoots, and maintains advanced manufacturing equipment while completing work orders. This role requires technical expertise and the ability to apply lean tools for continuous improvement. What You Will Do Machine Setup & Troubleshooting: Configure, troubleshoot, and optimize advanced production equipment and processes. Operations & Production: Start up, operate, and shut down advanced machinery to produce high-quality finished products. Process Improvement & Documentation: Collaborate with engineering to evaluate system effectiveness, develop procedures, and create training materials. Quality Control: Address production quality issues, escalating unresolved concerns to supervisors or quality teams. Waste Reduction: Identify and eliminate inefficiencies, complete A3 improvement plans, and participate in Kaizen events. What You Will Bring Education: High school diploma or GED equivalent. Experience: 5+ years of related manufacturing experience operating and monitoring extrusion equipment to produce product within quality and specification requirements. Experience setting up, inspecting, and troubleshooting extrusion lines, including material loading, die changes, and start-up adjustments. Technical Aptitude: Skilled in troubleshooting, repairing, and maintaining extrusion . Skills: Strong attention to detail, mathematical skills, and problem-solving capabilities. What We Can Offer You Competitive Pay & Benefits: Wages starting at $24 - $30/hr for Production Tech Srs! Generous Time Off: Take advantage of our generous vacation, sick days, holidays, plus a volunteer day to give back to the community. Retirement & Growth: 401(k) match, profit sharing, and abundant growth and development opportunities to help you advance your career. Work in Comfort: Stay cool and focused with an air-conditioned workspace designed for productivity and comfort. Comprehensive Healthcare Options: Choose from multiple healthcare plans through Blue Cross Blue Shield to find the coverage that works for you. Making the connections that matter. Join us and apply online to be part of the Panduit team. We're an Equal Opportunity Employer, dedicated to creating an inclusive workplace for all. Applicants must be currently authorized to work in the United States on a full-time basis. Panduit will not sponsor applicants for work visas now or in the future. Work Shift Night (United States of America)

At Panduit, we don't just offer a job - we offer a career where your contributions directly impact our customers, the environment and our company's success. You'll have the opportunity to grow, innovate, and be a part of an inclusive team that celebrates both individual and collective achievements. If you're ready to elevate your career and help us deliver exceptional experiences to our customers, apply today and make your mark with Panduit! Ready to take your technical skills to the next level? Join us as a Sr. Production Technician and be at the forefront of advanced manufacturing! The Sr. Production Technician operates, troubleshoots, and maintains advanced manufacturing equipment while completing work orders. This role requires technical expertise and the ability to apply lean tools for continuous improvement. What You Will Do Machine Setup & Troubleshooting: Configure, troubleshoot, and optimize advanced production equipment and processes. Operations & Production: Start up, operate, and shut down advanced machinery to produce high-quality finished products. Process Improvement & Documentation: Collaborate with engineering to evaluate system effectiveness, develop procedures, and create training materials. Quality Control: Address production quality issues, escalating unresolved concerns to supervisors or quality teams. Waste Reduction: Identify and eliminate inefficiencies, complete A3 improvement plans, and participate in Kaizen events. What You Will Bring Education: High school diploma or GED equivalent. Experience: 5+ years of related manufacturing experience working in extrusion or injection molding. Technical Aptitude: Skilled in troubleshooting, repairing, and maintaining advanced machinery, tools, and assemblies. Skills: Strong attention to detail, mathematical skills, and problem-solving capabilities. Shift: Availability to work 12 hour shift, 6a-6pm, 4 days on/4 off. What We Can Offer You Competitive Pay & Benefits: Wages starting at $24 - $30/hr for Production Tech Srs! Generous Time Off: Take advantage of our generous vacation, sick days, holidays, plus a volunteer day to give back to the community. Retirement & Growth: 401(k) match, profit sharing, and abundant growth and development opportunities to help you advance your career. Work in Comfort: Stay cool and focused with an air-conditioned workspace designed for productivity and comfort. Comprehensive Healthcare Options: Choose from multiple healthcare plans through Blue Cross Blue Shield to find the coverage that works for you. Making the connections that matter. Join us and apply online to be part of the Panduit team. We're an Equal Opportunity Employer, dedicated to creating an inclusive workplace for all. Applicants must be currently authorized to work in the United States on a full-time basis. Panduit will not sponsor applicants for work visas now or in the future. Work Shift Day (United States of America)