Test engineer jobs in Santa Barbara, CA - 135 jobs

The System Test Engineer II develops and executes System Test Plans for small, unmanned air vehicles and missiles and their associated subsystems. Testing encompasses simulator, ground and flight tests and includes logging and analyzing data and documenting test results. Position Responsibilities Support developmental test and evaluation of sub-system, model-scale, and full scale testing. Assist the Flight Test Director during flight tests Determine and communicate subsystem, system and flight test objectives. Develop test cards to verify that those objectives are met Review System Requirement documents to help ensure requirements are concise and testable Participate in test and flight readiness reviews, test briefs, and post-test debriefs Ensure test assets are prepared to support testing, including proper configuration of product hardware and software, writing test cards and procedures, and maintaining test equipment Process and analyze test data to determine test results. Analyze large test data sets using software tools (MATLAB or Excel) Capture test activities, fill in test data sheets, and transfer telemetry files to the network. Enter test failures or anomalies in an issue tracking system database. Summarize test activities and results in reports Determine regression test requirements based on specific sub-system modifications. Develop ad-hoc tests to troubleshoot test failures Responsible for estimating time required to conduct testing and completing assigned tasks within project schedule Work with outside test labs and assist technicians during testing when required Receives general instructions on routine work and more detailed instructions on new projects. Works within specific requirements to complete tasks under moderate supervision Works on problems of moderate scope where analysis of situations or data requires a review of a variety of factors Exercises judgment within defined procedures and practices to determine appropriate action. Contributes to meeting project cost and schedule Applies company policies and procedures to resolve a variety of issues. Typically performs multiple tasks on one project. Completes tasks within schedule and budget Other duties as assigned Basic Qualifications (Required Skills & Experience) Bachelor's degree in related discipline (Software, Systems, Electrical, Mechanical or Aerospace) is required or equivalent combination of education, training, and experience Minimum of 2 - 5 years' experience in related industry or projects that include conducting system or flight tests Experience with scripting and programming languages to automate testing is a plus Experience as a pilot or aircrew member would be beneficial Position requires 10-30% travel within the Continental U.S. Other Qualifications & Desired Competencies A relevant MS or PhD graduate in related discipline is preferred Work with product development engineers to derive test requirements based on product specifications and modifications Has willingness to learn and expand technical understanding of wind tunnel test techniques and measurement systems Is effective in conversing technically with experts in the fields of test instrumentation and data acquisition Skilled at documenting test plans, procedures, and reports; verbally directing UAV Operators and Observers during flight tests; capturing system test requirements; recording test failures and reporting test results Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties Displays strong initiative and drive to accomplish goals and meet company objectives Takes ownership and responsibility for current and past work products Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company Demonstrates effective problem-solving, analytical, interpersonal and strong communication skills Focused on teamwork, collaboration and puts the success of the team above one's own interests Demonstrates ability to work well with others across disciplines Physical Demands Ability to work in an office and manufacturing environment (Occasional) Able to frequently work outdoors in extreme weather conditions (hot and cold temperatures) and occasionally at night; Able to traverse across uneven ground and varying terrain (Frequent) Required to sit and stand for long periods; talk, hear, and use hands and fingers to operate a computer and telephone keyboard (Frequent) Able to lift, carry and/or move objects of varying sizes and shapes up to 50 lbs. (Frequent); Required to carry and set up equipment at test site locations (Frequent) Able to demonstrate good manual dexterity to assemble and disassemble product (Frequent) Able to repeatedly throw objects up to 16 lbs. over shoulder (Frequent) Able to maintain visual line of sight of unmanned air vehicles up to 1 kilometer away (Frequent) The salary range for this role is: $69,259 - $98,175 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizenship is required. Secret or Top Secret clearance, or the ability obtain a clearance is desired.

Requirements Bachelor's or advanced degree in Mechanical Engineering with emphasis on heat transfer,mechanical design, and structural analysis 7+ years of industry experience with aerospace testing facilities and techniques, thermal andstructural response instrumentation, and development and execution of test plans, includingspecialized instrumentation Strong interpersonal skills required to interface effectively with test facility personnel Ability to work independently at off-site test facilities, making decisions that can be critical toprogram success WE OFFER AN EXCEPTIONAL EMPLOYEE BENEFITS PACKAGE! Competitive Industry Pay 100% Employer-Paid Medical Insurance Premium HSA with Employer Contributions Dental and Vision Coverage Options Paid Holidays Paid Vacation and Sick leave Company Funded 401(k) and Profit Sharing Plans Employee Stock Ownership Plan (ESOP) Life and Disability Insurance Paid Parental Leave Discretionary Bonus Eligibility The annual pay range for the Test Engineer position is $125,000 to $225,000. The posted pay range values provide the candidate with guidance on annual base compensation for the position, at a full time level of effort, exclusive of overtime, bonus, and benefits-related compensation, over a range of qualifications that may fit hiring objectives. Toyon Research Corporation will consider the individual candidate's education, work experience, applicable knowledge, skills and training, among other factors, when preparing an offer of employment. Pay Transparency Nondiscrimination Provision Equal Opportunity Employer including Disability and Veterans Applicant Privacy Notice Learn more about our company in our latest video, We are Toyon. The application window for this posting will remain open until the position is filled. Ref #2632-H

Job DescriptionRole and Responsibilities: Full Time position supporting the TESS Task Order filling the Data Collection Coordinator position as a Test Engineer with some travel. Duties include dedicated support for managing and coordinating data collection activities associated with AEGIS and BMD system testing. The position is located onsite at NSWC PHD in Port Hueneme, CA. Position Duties: • Either Bachelor's degree in Engineering, Computer Science, or other technical degree and minimum of 4 years' experienceor no degree with a minimum of 10 years technical experience supporting Navy systems experience. • Develop and implement data collection (DC) plans to support AEGIS and BMD T&E activities including defining datacollection methodologies, identifying data requirements, and documenting data collection procedures. • Design and develop DC tools, such as test scripts, data sheets, and electronic forms, to capture relevant data. • Manage and coordinate DC activities during AEGIS and BMD T&E events, including scheduling, logistics, and personnel. • Analyze and interpret collected data to identify trends and patterns and provide recommended system improvements. • Develop and maintain accurate records of DC activities, including data sheets, test reports, and other documentation. • Provide technical guidance and support to junior personnel on DC procedures and tools. • Collaborate with other stakeholders, including engineers, technicians, and program managers, to ensure that DC activities are aligned with program goals and objectives. • Collect and forward shipboard data for event analysis. • Maintain and track to completion all the Test Observation Reports (TORs) associated with the assigned T&E Project. • Assist the Project Engineer/Project Officer with coordinating all test resources including people, assets, ranges, targets, and schedules to ensure successful completion of test events. • Assist the Project Engineer/Project Officer to ensure in port and underway testing is conducted IAW prescribed test plans. • Maintain liaison between the Shipboard personnel and test team regarding DC requirements and procedures. • Plan, coordinate, and facilitate applicable planning meetings associated with the assigned T&E Project. • Must maintain documentation integrity for classified, Controlled Unclassified Information (CUI), and unclassified materials. • Must have strong knowledge of advanced features of MS Word & MS Office Products and strong technical writing skills. • Must have a valid driver's license with own transportation and able to travel. • Must be able to satisfactorily complete background check and get a government clearance. • Must be able to follow company policies and procedures. • Must be able to write, speak and understand English and able to write clear, detailed technical monthly reports. Preferred Skills: • Navy A/C School Mandatory Physical Requirements: • Must be capable of working aboard US Navy ships pier side and at-sea.

Job Description Job Title: Senior Test and Integration Systems Engineer Department: Raytheon Intelligence and Space, Vision Systems (RVS), Systems Integration and Test Primary Mission The Systems Integration and Test Department within Raytheon Intelligence and Space, Vision Systems is seeking an experienced Senior Test and Integration Systems Engineer. This role focuses on airborne electro optical and infrared surveillance and targeting sensor systems and supports the delivery of EO/IR Focal Plane Array sensor products from development through production. Key Responsibilities Support integration, verification, and validation (IV&V), design verification testing (DVT), and production testing for EO/IR Focal Plane Array sensor systems Develop test plans and execute product test activities in support of engineering and production builds Support the Test Architect in developing and executing the test architecture from bid phase through production Contribute to test system design and collaborate with a multidisciplinary engineering team Work closely with operations and manufacturing teams to enable efficient product flow Provide actionable test and production metrics Minimize cycle time and maximize manufacturing yield Required Skills and Experience Experience with test methodologies for sensor systems Background in optical performance, analysis, and test verification for EO/IR Focal Plane Array sensor systems or closely related development or production programs Preferred Skills and Experience Experience developing and or executing factory test plans, procedures, and test equipment for EO/IR Focal Plane Array sensor systems and ROICs Prior experience with ROIC wafer probing, fabrication, integration, verification, and validation for complex EO/IR systems Strong written, verbal, and presentation communication skills Ability to communicate effectively with test management, IPT leaders, hardware and software engineers, specialty engineers, program managers, and customers Experience using basic laboratory equipment such as power supplies, oscilloscopes, and digital voltmeters Education Requirements Bachelor's degree in a related STEM discipline with a minimum of 5 years of relevant experience Or an advanced degree in a related field with a minimum of 3 years of relevant experience Relevant experience includes airborne and or space EO/IR system test, integration, verification and validation testing, and product transition to production Years of Experience Minimum of 5 years Performance Measurement Success will be measured by the successful completion of assigned test engineering tasks as evaluated by Test Engineering Section leadership Work Environment and Culture Strong collaboration with operations and manufacturing teams

* Seeking an experienced Senior Test & Integration System Engineer with expertise in airborne electro-optical and infrared (EO/IR) surveillance and targeting sensor systems. Main functions of this role: * You will support integration, verification and validation (IV&V), design verification testing (DVT), and production testing to support the delivery of EO/IR Focal Plane Array Sensor Systems. * You will develop test plans and execute product test activities in support of engineering and production builds. * You will support the Test Architect in the development and execution of the test architecture from bid through production, contribute to the test system design, and collaborate with a multi-disciplinary team to achieve these goals * You will collaborate with operations and manufacturing teams to enable efficient product flow, provide actionable metrics, minimize cycle time, and maximize yield Required Skill Sets: * Experience in test methodology within sensors to include optical performance, analysis, and test verification for EO/IR Focal Plane Array sensor systems and/or relatable experience in development and/or production program Desired Skill Sets: * Experience developing and, or executing factory test plans, procedures, and equipment to support an EO/IR Focal Plane Array sensor system and ROICs * Prior experience with ROIC wafer probing, fabrication, integration, verification, and validation for a complex EO/IR system. * Excellent communication skills (written, verbal, and presentation) and be able to effectively communicate with Test Management, IPT leaders, hardware and software development engineers, specialty engineers, program managers, and customers. * Experience with use of basic laboratory equipment; power supplies, oscilloscopes, digital voltmeters Years of Experience Required * 5 or more Education Level Required: * Requires a bachelor's degree in a related STEM discipline and a minimum of 5 years of relevant experience, or an advanced degree in a related field and minimum 3 years' experience. Relevant experience to include airborne and, or space EOIR system test, integration verification and validation testing, product transition to production or relatable experience. How will the contractor's success be measured? * Successful completion of test engineering tasking as measured by the Test Engineering Section leaders. * Culture * Collaboration with operations and manufacturing teams. Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law. Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices. Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at accommodations@butler.com. #ZR

At Ensign-Bickford Aerospace & Defense Company (EBAD), we believe that our strengths are built on our most important resource - our people. Join EBAD and you'll be a part of a team who creates cutting edge technology that will blast us into the future. No other company can match the innovative energetic solutions that we provide. At EBAD you will actively contribute to successful missions putting men, women and satellites into space, and protecting our armed service men and women around the world. If this is the culture and work environment you are seeking, then EBAD is the place for you! Job Description EBAD seeks a capable individual for the position of Test Engineer, reporting to the Test Engineering Lead. The Test Engineer leads the effort for environmental and functional testing of EBAD products, test lab capabilities/growth and technical problem solving. Responsibilities include: Requirements evaluation, translating requirement into test program scope, and test program scheduling. Equipment / Instrumentation selection, verification and validation. Data Analysis, data report creation. Test method(s) development and Prove-out and training of technical staff. Continuous Improvement; testing methods, Test processes, Documentation Stewardship Troubleshooting as needed. Fixture/Tool Design, procurement, through verification and validation Perform and lead Test Readiness Reviews Requirements: The candidate shall have a minimum of a BS degree in an engineering discipline (Mechanical Engineering preferred) and applicable experience. Non-degreed candidates will be considered if they have a minimum of 5 years of directly related experience in a test engineering environment. Candidates shall have good written and verbal communication skills and be able to interface with individuals at multiple levels in the organization. Strong mechanical aptitude and problem-solving skills are required. Knowledge of explosive materials and/or ordnance devices is beneficial. SolidWorks modeling. Ability to generate and lead Test Readiness Reviews. (TRRs) Ability to translate customer requirements into procedures. Electronics and instrumentation knowledge is preferred. Experience working in an aerospace industry is preferred. The ideal candidate will have experience in a test lab environment with exposure to the following areas: Preferred Experience: Climatic Testing: Thermal cycling and thermal shock Temperature / Humidity Thermal Vacuum (TVAC) / Altitude Dynamic Testing: Random and Sine Vibration Classical and SRS Shock Acceleration Tensile/compression Electrical testing: Basic electrical knowledge Current/Voltage/Resistance measurements Dialectric breakdown Instrumentation: Pressure Transducers Accelerometers Oscilloscopes Data Acquisition Systems (DAQs): Charge Amplifiers & Signal Conditioners Constant Current Supplies Digital and Analog Filters Various meters (multi-meters, milliohm-meters, HR meters) Hi-Pot testers Thermocouples and Humidity Probes Pulse generators Load cells/Strain gages Compensation: Salary Range: $90,000 - $120,000 per year. Salary is determined by the applicant's education, experience, knowledge, skills, abilities, internal equity, and alignment with market data. Ensign-Bickford Aerospace & Defense Company is an Equal Opportunity Employer (EOE). Qualified applicants are considered for employment without regard to race, religion, color, sex, age, disability, sexual orientation, genetic information, national origin, or veteran status.

**Be visionary** Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. **Job Description** **Job Summary:** Test Engineer: Designs, develops, implements and executes cost-effective methods of testing and troubleshooting systems and equipment. Prepares test and diagnostic programs, designs test fixtures and equipment, and completes specifications and procedures for new products. Plans the labor, schedules, and equipment required for testing and evaluating standard and special devices. May be responsible for setting the parameters and testing of production products. **Primary Duties & Responsibilities:** + Work with the Teledyne FLIR design team and customer to formulate test requirements + Prepare test matrix for new IC and/or FPA test + Develop comprehensive test plans, test cases, and test scripts based on product requirements and specifications + Write test code for new IC characterization and probe test + Prepare Teledyne FLIR characterization and wafer probe test stations + Perform required characterization and production probe tests + Write test procedures and test reports as necessary + Support and on occasion conduct performance testing to ensure the product meets performance requirements under various conditions + Develop and maintain automated test scripts and frameworks to improve testing efficiency and repeatability + Assist the design team in understanding and correcting any design deficiencies + Assist other engineers in the performance of related duties + Make sure equipment is setup timely + Verification of new IC and/or FPA performance **Job Qualifications:** + Attention to Detail required assuring that tests are fully documented in compliance with Teledyne FLIR's quality system + Analytical Problem Solving required to assist the design team in understanding and correcting design deficiencies + Collaboration & Teamwork to effectively communicate with design team and customers + Ability to work independently and as part of a team + Strong Communication Skills - Oral, Listening & Written to effectively communicate and document test results and formulate test requirements + Innovation: Must have the ability to develop new approaches and/or creative solutions using innovative methodologies and/or concepts + Flexibility required ensuring the ability to adapt to changing requirements and work-load re-prioritization as indicated. + Knowledge and experience in the following required: + Electronic principles such as Ohms law + Electronic components such as resistors and capacitors + Basic understanding of CMOS circuits + Ability to read schematic diagrams + Ability to read, write and debug C #, Python, Verilog, and Microsoft Visual Basic code + Ability to assemble printed circuit test boards and solder components is desired + Imaging sensors, dewars and associated equipment is desired + Wafer probe stations and associated equipment is desired **What We Offer** + Competitive Salary & Benefits Package + Health, Dental, Vision, and Life Insurance starting Day 1 + Paid Vacation, Sick Time, and Holidays + 401(k) with Company Match + Employee Stock Purchase Plan + Tuition Reimbursement for Education + Fun Employee Events throughout the year **Salary Range:** $77,900.00-$103,800.000 **Pay Transparency** The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, local regulations (such as minimum wage), education/training, work experience, key skills, and type of position. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws. You may not realize it, but Teledyne enables many of the products and services you use every day **.** Teledyne provides enabling technologies to sense, transmit and analyze information for industrial growth markets, including aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, energy, medical imaging and pharmaceutical research.

DEX has been a leading global provider of supply chain solutions since 1980. DEX manufactures, distributes, and repairs electronic parts and assemblies for customers. While we specialize in hard-to-find parts, we source, manufacture, and repair an extensive range of parts across multiple verticals. For over 40 years, DEX has delivered supply chain solutions by understanding the unique complexity of each customer's business. Our customer portfolio spans multiple industries, including healthcare, renewable energy, communications, networking, consumer electronics, semiconductor, and industrial end-markets. Job Summary: The right candidate can progress from test engineering to manufacturing engineering, design engineering or research and development engineering. If you enjoy the opportunity to work on a variety of cutting edge, highly technical advanced electronic projects which will never leave you bored, we want to meet you. Essential Duties and Responsibilities: Diagnose and repair electronic boards and assemblies to the component level. Use oscilloscopes, multi-meters, and specialized test equipment to troubleshoot and isolate failures. Follow detailed written process checklists to validate and test functionality. Assist Technicians and other Engineers with diagnosis of electronic systems. Required Education and Experience Bachelor's degree in Electrical Engineering with a minimum 3.0 GPA Ability to work on a variety of projects across multiple technologies. Excellent communication skills. Prior experience with Electronics repair. Physical Requirements Must be able to lift up to 25 lbs. DEX is an equal opportunity employer. We are committed to providing a workplace that promotes diversity, equity, and inclusion. We do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, marital status, sexual orientation, gender identity, or any other protected characteristics in accordance with applicable federal, state, and local laws.

Basic Qualifications 1+ years of experience contributing to the architecture and design (architecture, design patterns, reliability and scaling) of new and current systems. 2+ years of non-internship professional software development experience Programming experience with at least one modern language such as Java, C++, or C# including object-oriented design Preferred Qualifications Experience developing multi-tenant software applications Experience with AWS technology (e.g. EC2, DynamoDB, S3) Proficiency in relational databases Proficiency with search technologies (ElasticSearch/Lucene) Proficiency building large-scale, high-availability web services Security-minded and comfortable working in Linux

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Active and existing security clearance required after day 1 At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon Vision Systems (RVS) Systems Integration and Test Department is seeking an experienced Senior Test & Integration System Engineer with expertise in airborne electro-optical and infrared (EO/IR) surveillance and targeting sensor systems. This is a 3rd shift, onsite role in Goleta, CA. What You Will Do: You will support integration, verification and validation (IV&V), design verification testing (DVT), and production testing to support the delivery of EO/IR Focal Plane Array Sensor Systems. You will develop test plans and execute product test activities in support of engineering and production builds. You will support the Test Architect in the development and execution of the test architecture from bid through production, contribute to the test system design, and collaborate with a multi-disciplinary team to achieve these goals. You will collaborate with operations and manufacturing teams to enable efficient product flow, provide actionable metrics, minimize cycle time, and maximize yield. Provide reliable coverage and presence during required 3rd‑shift schedule. Qualifications You Must Have: Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior relevant experience. Experience in airborne and/or space EO/IR system test Experience in integration verification, validation testing and/or product transition to production. . Experience with integrating firmware, software and hardware. Experience with programming in LABVIEW and/or MATLAB. Ability to work a fixed 3rd‑shift schedule (start times between 10:00 p.m. and 4:00 a.m.). Qualifications We Prefer Experience in test methodology within sensors to include optical performance, analysis, and test verification for EO/IR Focal Plane Array sensor systems and/or relatable experience in development and/or production program Experience developing and, or executing factory test plans, procedures, and equipment to support an EO/IR Focal Plane Array sensor system and ROICs Prior experience with ROIC wafer probing, fabrication, integration, verification, and validation for a complex EO/IR system. Excellent communication skills (written, verbal, and presentation) and be able to effectively communicate with Test Management, IPT leaders, hardware and software development engineers, specialty engineers, program managers, and customers. Experience with use of basic laboratory equipment; power supplies, oscilloscopes, digital voltmeters. What We Offer: Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation Eligible - relocation assistance available for this position Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. Goleta, CA: ************************************************************** As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 95,500 USD - 181,700 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

**Country:** United States of America ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance **Security Clearance Type:** DoD Clearance: Secret **Security Clearance Status:** Active and existing security clearance required after day 1 At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon Vision Systems (RVS) Systems Integration and Test Department is seeking an experienced Senior Test & Integration System Engineer with expertise in airborne electro-optical and infrared (EO/IR) surveillance and targeting sensor systems. **This is a 3rd shift, onsite role in Goleta, CA.** **What You Will Do:** + You will support integration, verification and validation (IV&V), design verification testing (DVT), and production testing to support the delivery of EO/IR Focal Plane Array Sensor Systems. + You will develop test plans and execute product test activities in support of engineering and production builds. + You will support the Test Architect in the development and execution of the test architecture from bid through production, contribute to the test system design, and collaborate with a multi-disciplinary team to achieve these goals. + You will collaborate with operations and manufacturing teams to enable efficient product flow, provide actionable metrics, minimize cycle time, and maximize yield. + Provide reliable coverage and presence during required 3rd‑shift schedule. **Qualifications You Must Have:** + Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior relevant experience. + Experience in airborne and/or space EO/IR system test + Experience in integration verification, validation testing and/or product transition to production. + . Experience with integrating firmware, software and hardware. + Experience with programming in LABVIEW and/or MATLAB. + Ability to work a fixed 3rd‑shift schedule (start times between 10:00 p.m. and 4:00 a.m.). **Qualifications We Prefer** + Experience in test methodology within sensors to include optical performance, analysis, and test verification for EO/IR Focal Plane Array sensor systems and/or relatable experience in development and/or production program + Experience developing and, or executing factory test plans, procedures, and equipment to support an EO/IR Focal Plane Array sensor system and ROICs + Prior experience with ROIC wafer probing, fabrication, integration, verification, and validation for a complex EO/IR system. + Excellent communication skills (written, verbal, and presentation) and be able to effectively communicate with Test Management, IPT leaders, hardware and software development engineers, specialty engineers, program managers, and customers. + Experience with use of basic laboratory equipment; power supplies, oscilloscopes, digital voltmeters. **What We Offer:** + Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. + Relocation Eligible - relocation assistance available for this position **Learn More & Apply Now!** + Please consider the following role type definition as you apply for this role. + Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. + Goleta, CA: ************************************************************* . **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** The salary range for this role is 95,500 USD - 181,700 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

barkback is a fast growing start-up focused on helping small businesses and their customers. barkback extends the customer experience beyond the storefront. From private feedback to exclusive promotions, we deepen the relationship between a business and its customers, allowing customers to freely express themselves while providing the business with new insights. Together we foster a new level of connection which improves both the business and the customer experience. Job Description barkback is seeking a software engineer to join our awesome team. Amazing opportunity to be a part of a mobile-consumer venture that is changing the way customers interact with businesses. Looking for a killer programmer to help us solve exciting problems. As a software engineer, you will own the enhancement of our backend databases and servers that power the barkback service, and also develop tools for the barkback teams to get even more done. You'll get to work closely with our web developers and product teams to bring new product features to life as well as make the existing product even more amazing. Being extremely intelligent doesn't hurt. Qualifications Object Oriented programming experience with at least 4 years experience or a degree in a related field. Experience working with a MVC framework, and more specifically Ruby on Rails, is a plus. Experience using AJAX/JSON and creating robust APIs is heavily encouraged, but not required. Experience working on a SaaS application. Experience writing SQL is required. Knowledge of website operations is a plus, especially in a cloud hosted environment. You must be able to work from our amazing office located in downtown Santa Barbara. Additional Information Web: *********************** Check out our IOS and Android apps.

The Sr. Staff System Test Engineer develops and executes System Test Plans for small, unmanned air vehicles and missiles and their associated subsystems. Testing encompasses simulator, ground and flight tests and includes logging and analyzing data and documenting test results. Position Responsibilities Support and lead developmental test and evaluation of sub-system, model-scale, and full scale testing. Assist the Flight Test Director during flight tests Determine and communicate subsystem, system and flight test objectives. Develop test cards to verify that those objectives are met Review System Requirement documents to help ensure requirements are concise and testable Lead and participate in test and flight readiness reviews, test briefs, and post-test debriefs Ensure test assets are prepared to support testing, including the proper configuration of product hardware and software, writing test cards and procedures, and maintaining test equipment Process and analyze test data to determine test results. Analyze large test data sets using software tools (MATLAB or Excel) Capture test activities, fill in test data sheets, and transfer telemetry files to the network. Enter test failures or anomalies in an issue tracking system database Develop System Test Plans, for small unmanned air vehicles and missiles and their associated subsystems, execute simulator and flight tests, and document test results Responsible for estimating time required to conduct testing and completing assigned tasks within project schedule Work with outside test labs and assist technicians during testing when required Demonstrates good judgment within defined procedures and practices to determine appropriate action Work with product development engineers to derive test requirements based on product specifications and modifications Acts independently to determine methods and procedures on new or special assignments. May supervise the activities of others on the team Works on significant and unique issues where analysis of situations or data requires an evaluation of intangibles Other duties as assigned Basic Qualifications (Required Skills & Experience) Bachelor's degree in related discipline (Software, Systems, Electrical, Mechanical or Aerospace) is required or equivalent combination of education, training, and experience Minimum of 12 - 15 years' experience in related industry or projects that include conducting system or flight tests Is effective in conversing technically with experts in the fields of test instrumentation and data acquisition Skilled at documenting test plans, procedures, and reports; verbally directing UAV Operators and Observers during flight tests; capturing system test requirements; recording test failures and reporting test results Position requires 10-30% travel within the Continental U.S. Other Qualifications & Desired Competencies Advanced degree in related discipline is preferred Experience with scripting and programming languages to automate testing is preferred Experience as a pilot or aircrew member would be beneficial Willingness to learn and expand technical understanding of wind tunnel test techniques and measurement systems Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties Displays strong initiative and drive to accomplish goals and meet company objectives Takes ownership and responsibility for current and past work products Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company Has effective problem-solving, analytical, interpersonal and strong communication skills Focuses on teamwork, collaboration and puts the success of the team above one's own interests Works well with others across disciplines and has strong leadership skills Physical Demands Ability to work in an office and manufacturing environment (Occasional) Able to frequently work outdoors in extreme weather conditions (hot and cold temperatures) and occasionally at night; Able to traverse across uneven ground and varying terrain (Frequent) Required to sit and stand for long periods; talk, hear, and use hands and fingers to operate a computer and telephone keyboard (Frequent) Able to lift, carry and/or move objects of varying sizes and shapes up to 50 lbs. (Frequent); Required to carry and set up equipment at test site locations (Frequent) Able to demonstrate good manual dexterity to assemble and disassemble product (Frequent) Able to repeatedly throw objects up to 16 lbs. over shoulder (Frequent) Able to maintain visual line of sight of unmanned air vehicles up to 1 kilometer away (Frequent) Clearance Level No Clearance The salary range for this role is: $136,807 - $194,040 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizenship is required. Secret or Top Secret clearance, or the ability obtain a clearance is desired.

Role and Responsibilities: Full Time position supporting the TESS Task Order filling the Data Collection Coordinator position as a Test Engineer with some travel. Duties include dedicated support for managing and coordinating data collection activities associated with AEGIS and BMD system testing. The position is located onsite at NSWC PHD in Port Hueneme, CA. Position Duties: * Either Bachelor's degree in Engineering, Computer Science, or other technical degree and minimum of 4 years' experienceor no degree with a minimum of 10 years technical experience supporting Navy systems experience. * Develop and implement data collection (DC) plans to support AEGIS and BMD T&E activities including defining datacollection methodologies, identifying data requirements, and documenting data collection procedures. * Design and develop DC tools, such as test scripts, data sheets, and electronic forms, to capture relevant data. * Manage and coordinate DC activities during AEGIS and BMD T&E events, including scheduling, logistics, and personnel. * Analyze and interpret collected data to identify trends and patterns and provide recommended system improvements. * Develop and maintain accurate records of DC activities, including data sheets, test reports, and other documentation. * Provide technical guidance and support to junior personnel on DC procedures and tools. * Collaborate with other stakeholders, including engineers, technicians, and program managers, to ensure that DC activities are aligned with program goals and objectives. * Collect and forward shipboard data for event analysis. * Maintain and track to completion all the Test Observation Reports (TORs) associated with the assigned T&E Project. * Assist the Project Engineer/Project Officer with coordinating all test resources including people, assets, ranges, targets, and schedules to ensure successful completion of test events. * Assist the Project Engineer/Project Officer to ensure in port and underway testing is conducted IAW prescribed test plans. * Maintain liaison between the Shipboard personnel and test team regarding DC requirements and procedures. * Plan, coordinate, and facilitate applicable planning meetings associated with the assigned T&E Project. * Must maintain documentation integrity for classified, Controlled Unclassified Information (CUI), and unclassified materials. * Must have strong knowledge of advanced features of MS Word & MS Office Products and strong technical writing skills. * Must have a valid driver's license with own transportation and able to travel. * Must be able to satisfactorily complete background check and get a government clearance. * Must be able to follow company policies and procedures. * Must be able to write, speak and understand English and able to write clear, detailed technical monthly reports. Preferred Skills: * Navy A/C School Mandatory Physical Requirements: * Must be capable of working aboard US Navy ships pier side and at-sea.

This opportunity is located within our Ensign-Bickford Aerospace & Defense Company business, a global leader of mission-critical hardware and systems solutions including precision energetics systems and innovative explosive solutions.Click here to learn more. Job Description EBAD seeks a capable individual for the position of Test Engineer, reporting to the Test Engineering Lead. The Test Engineer leads the effort for environmental and functional testing of EBAD products, test lab capabilities/growth and technical problem solving. Responsibilities include: Requirements evaluation, translating requirement into test program scope, and test program scheduling. Equipment / Instrumentation selection, verification and validation. Data Analysis, data report creation. Test method(s) development and Prove-out and training of technical staff. Continuous Improvement; testing methods, Test processes, Documentation Stewardship Troubleshooting as needed. Fixture/Tool Design, procurement, through verification and validation Perform and lead Test Readiness Reviews Requirements: The candidate shall have a minimum of a BS degree in an engineering discipline (Mechanical Engineering preferred) and applicable experience. Non-degreed candidates will be considered if they have a minimum of 5 years of directly related experience in a test engineering environment. Candidates shall have good written and verbal communication skills and be able to interface with individuals at multiple levels in the organization. Strong mechanical aptitude and problem-solving skills are required. Knowledge of explosive materials and/or ordnance devices is beneficial. SolidWorks modeling. Ability to generate and lead Test Readiness Reviews. (TRRs) Ability to translate customer requirements into procedures. Electronics and instrumentation knowledge is preferred. Experience working in an aerospace industry is preferred. The ideal candidate will have experience in a test lab environment with exposure to the following areas: Preferred Experience: Climatic Testing: Thermal cycling and thermal shock Temperature / Humidity Thermal Vacuum (TVAC) / Altitude Dynamic Testing: Random and Sine Vibration Classical and SRS Shock Acceleration Tensile/compression Electrical testing: Basic electrical knowledge Current/Voltage/Resistance measurements Dialectric breakdown Instrumentation: Pressure Transducers Accelerometers Oscilloscopes Data Acquisition Systems (DAQs): Charge Amplifiers & Signal Conditioners Constant Current Supplies Digital and Analog Filters Various meters (multi-meters, milliohm-meters, HR meters) Hi-Pot testers Thermocouples and Humidity Probes Pulse generators Load cells/Strain gages Compensation: Salary Range: $90,000 - $120,000 per year. Salary is determined by the applicant's education, experience, knowledge, skills, abilities, internal equity, and alignment with market data. Ensign-Bickford Aerospace & Defense Company is an Equal Opportunity Employer (EOE). Qualified applicants are considered for employment without regard to race, religion, color, sex, age, disability, sexual orientation, genetic information, national origin, or veteran status.

**Be visionary** Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. **Job Description** **Join Teledyne Imaging Sensors as a Detector Test Engineer!** Are you ready to launch your career to the next level? Join our mission-focused team, where we value technical excellence, collaboration, and agility. We're the world's leading provider of infrared sensors for space, with customers like NASA, ESA, and the US Department of Defense. **What You'll Do:** + Set up and carry out detector performance testing (I-V, responsivity, etc.) according to test requirements, work instructions and test procedures. + Work with focal plane engineers to understand test conditions and test data; generate data summary and report. + Utilize Manufacturing Execution System (MES) for production data recording. + Maintain test equipment in good operating condition and in calibration. + Contribute to test setup and fixture improvements and new test capabilities, maintains test procedures and work instructions, and archive test results. **What You Need:** + Knowledge in electrical and optical testing of semiconductor devices. + Experience in operating spectrometers, current/voltage scanners, amplifiers, cryogenic dewar and vacuum pumps, as a plus. + Familiarity in programming and script writing for hardware interfacing and data acquisition + Good organizational and effective communication skills (written and verbal) + Computer proficiency using Microsoft Office Suite (Word, Excel & PowerPoint) + Exemplary ethics and business conduct and work cognizant of safe work practices + Bachelor's degree in electrical engineering or related technical discipline with 1-3 years of cryogenic experience. + **US Citizenship due to access restrictions.** **What We Offer:** · Competitive Salary & Benefits Package · Health, Dental, Vision, and Life Insurance from Day 1 · Paid Vacation, Sick Time, and Holidays · 401(k) with Company Match · Employee Stock Purchase Plan · Educational Tuition Reimbursement · Fun Employee Events throughout the year **Why Teledyne?** Our infrared sensors are "Everywhere You Look" - from the James Webb Space Telescope to climate change studies. Join us and make a difference! Ready to take the next step? Apply now and become part of a team that's pushing the boundaries of technology and innovation. \#TS&I **Salary Range:** $77,900.00-$103,800.000 **Pay Transparency** The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, local regulations (such as minimum wage), education/training, work experience, key skills, and type of position. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws. You may not realize it, but Teledyne enables many of the products and services you use every day **.** Teledyne provides enabling technologies to sense, transmit and analyze information for industrial growth markets, including aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, energy, medical imaging and pharmaceutical research.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Active and existing security clearance required after day 1 At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. Raytheon Vision Systems (RVS) Systems Integration and Test Department is seeking a Test & Integration System Engineer. In Systems Integration and Test (SI&T) we integrate, verify, and validate our products. We put our systems together, exercise them in the lab or in the field, measure and analyze performance, and make sure our products work the first time and every time. To accomplish this, we develop plans and procedures, debug and evaluate system functions and interfaces, develop test environments, and work hand-in-hand with our customers. This is an onsite role in Goleta, CA. What You Wil Do You will support integration, verification and validation (IV&V), design verification testing (DVT), and production testing to support the delivery of EO/IR Focal Plane Array Sensor Systems. You will develop test plans and execute product test activities in support of engineering and production builds. You will develop and exercise good engineering judgement and technical decision making inside the Systems Engineering & Test Capabilities organization You will develop requirements, generate test procedures, integrate new systems, perform system testing, and support lifecycle requirements for assigned program systems Qualification You Must Have Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years of prior relevant experience. Experience with integrating firmware, software, and hardware. Experience with use of power supplies, oscilloscopes, digital voltmeters and/or spectrum analyzer Experience with programming in LABVIEW and/or MATLAB for test automation and/or data analysis. Qualifications We Prefer Experience performing and executing test methodology within an EO/IR Focal Plane Array system. Experience with electrical schematics, interface control documentation, and communications protocols. Analytical capabilities, or an ability to relate observed phenomenon back to first principals. Experience with instrumentation and collection of large data sets, including the application of scripting or automation to data collection and analysis. What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. Relocation Eligible - relocation assistance available for this position Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: ************************************************ Location Info Goleta, CA: ************************************************************* As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 75,800 USD - 144,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

**Country:** United States of America ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance **Security Clearance:** DoD Clearance: Secret At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. Job Summary: The Space & Airborne Center within Systems Engineering Integration & Test seeks talented Systems Engineers. Our Space & Airborne team located in Goleta, CA integrate hardware and software, develop test plans and procedures, debug and evaluate system functions and interfaces, and verify system requirements in support of final sell-off to the customer. We put our systems together, exercise them in the lab or in the field, measure and analyze performance, and make sure our products work the first time and every time. Every day there is a different set of challenges to overcome. You'll be expected to collaborate across disciplines and partners to implement solutions. In this role, you'll get to know a little bit about every aspect of the system and have a direct hand in making it all work together supporting teams of engineers engaged in integration and test efforts. As a Systems Engineer in the life cycle center within the Space & Airborne Center, you will interface with the customers to develop CONOPS, system architecture, system requirements and manage qualification, verification and validation. Our center focuses on back-end sustainment and repair design and sustainment development as well as transitioning systems through integration and test from production to warranty/sustainment. You will also perform functional / physical analysis, allocation, and trade studies. You will support Radar Mode requirement development, engineering testing, integration and flight-testing, production, system deployment, and post deployment support across the product lifecycle. Through Digital Transformation (DTx) you will perform these functions using a variety of methods and enabling technologies, including Model-Based Systems Engineering (MBSE) and Agile product development. This position is an onsite role in Goleta, CA. Test event support activity may require travel which is not expected to exceed 20%. **What You Will Do:** + Support planning and execution of Integration, Verification, or Troubleshoot Test activities in our labs, in the field, or at a Depot facility + Support activity may require travel + Support qualification of our products + Support troubleshooting and failure data analyses, including root cause and corrective action processes and advanced use of lab or field test equipment + Complete and compile detailed performance evaluations, including the use of analysis tools, such as MATLAB + Prepare and present results in reports and briefings to internal or external stakeholders + Support in managing engineering support activities related to test and trouble-shoot of hardware + Perform root-cause analysis & implement minor design changes + Maintain engineering specifications (DS, ARD, etc.) & drawing (Schematics & Assembly Drawings) + Maintain engineering databases + Coordinate engineering tag up and meetings between the Program, System Engineering, and Chief Engineer + Resolve and coordinate system technical solutions with Engineering teams + Provide technical guidance and support to Engineering IPTLs + Participate in periodic team meetings, interface teleconference meetings, working group meetings + Support associated with implementing process requirements + Support for mockup hardware repairs + Sustainment/Depot returns and repair **What You Will Learn:** After completion of comprehensive on-the-job training, the candidate will be a part of a team supporting Systems Engineering and Systems Integration & Test activities across the product development lifecycle. **Qualifications You Must Have:** + Master's degree in Science, Technology, Engineering or Mathematics (STEM) discipline (preferably Electrical Engineering, Computer Engineering, Software Engineering, Systems Engineering, Aerospace Engineering or Physics degree program). + This position requires 12 months or more of professional experience (excluding internships) + Ability to obtain and maintain a U.S. government issued security clearance prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance. + Experience with tools, such as Microsoft Office, MATLAB or Python, for data analysis and automation + Experience with troubleshooting technical issues with electronics in an academic or internship setting, including the use of common commercial test equipment (oscilloscope, spectrum analyzer, etc.) **Qualifications We Prefer:** + Experience with or exposure to various military platforms for weapons conveyance, such as ships, ground combat systems, fixed and rotary wing aircraft + Experience with using telemetry data collection equipment to capture real time data and/or real time monitoring + Experience with electrical schematics, interface control documentation, and communications protocols + Experience with reading and integrating software routines with hardware/electronics; C/C++/C# preferred + Experience with instrumentation and collection of large data sets, including the application of scripting or automation to data collection and analysis **What We Offer:** + Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. + Relocation eligible **Learn More & Apply Now!** Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. Please upload a copy of your most recent transcripts with your resume when applying to this requisition. Include your cumulative GPA and projected graduation date on your resume. This position requires a security clearance. **DCSA Consolidated Adjudication Services (DCSA CAS)** , an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: ************************************************ We Are RTX **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** The salary range for this role is 66,000 USD - 130,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

Requirements Candidates for the AI/ML Software Engineer position should have a strong background in engineering, computer science, physics, and/or mathematics. An advanced degree (M.S./Ph.D.) or a Bachelor's degree and at least two years of industry experience are required. WE OFFER AN EXCEPTIONAL EMPLOYEE BENEFITS PACKAGE! Competitive Industry Pay 100% Employer-Paid Medical Insurance Premium HSA with Employer Contributions Dental and Vision Coverage Options Paid Holidays Paid Vacation and Sick leave Company Funded 401(k) and Profit Sharing Plans Employee Stock Ownership Plan (ESOP) Life and Disability Insurance Paid Parental Leave Discretionary Bonus Eligibility The annual pay range for the AI/ML Software Engineer position is $110,000 to $190,000. The posted pay range values provide the candidate with guidance on annual base compensation for the position, at a full time level of effort, exclusive of overtime, bonus, and benefits-related compensation, over a range of qualifications that may fit hiring objectives. Toyon Research Corporation will consider the individual candidate's education, work experience, applicable knowledge, skills and training, among other factors, when preparing an offer of employment. Pay Transparency Nondiscrimination Provision Equal Opportunity Employer including Disability and Veterans Applicant Privacy Notice Learn more about our company in our latest video, We are Toyon. Ref #2608-C