Top Test Technician Skills

Below we've compiled a list of the most important skills for a Test Technician. We ranked the top skills based on the percentage of Test Technician resumes they appeared on. For example, 17.4% of Test Technician resumes contained Test Procedures as a skill. Let's find out what skills a Test Technician actually needs in order to be successful in the workplace.

The six most common skills found on Test Technician resumes in 2020. Read below to see the full list.

1. Test Procedures

high Demand
Here's how Test Procedures is used in Test Technician jobs:
  • Determined requirements, reviewed test procedures, and coordinated material needs of spacecraft equipment; communicating regularly with customers and engineers.
  • Support system engineers as required by generating/correcting test procedures, cable documents, and other documentation for the purpose of manufacturing.
  • Performed diagnostic test procedures on bar code scanning devices from written engineering instructions to optimize device performance to customer specifications.
  • Tested new products and developed test procedures for various network applications such as client/server according to hardware requirements.
  • Worked with clients in a Laboratory setting in order to provide required test procedures for product testing/qualification procedures.
  • Recommended changes in test procedures and specifications that contributed to the improvement of testing efficiency and capabilities.
  • Utilize excellent communications skills and understanding of test procedures and equipment to properly train department temps.
  • Research and develop new test procedures for troubleshooting equipment to maximize efficiency and accuracy of repairs.
  • Communicate with Customers to provide feedback for improvement to test procedures and documentation as needed.
  • Tested cable harnesses using engineering test procedures to assure continuity and cable integrity.
  • Witnessed and verified test procedures for in-process and acceptance verification of vehicle hardware.
  • Verified all test procedures and performed in-process and acceptance verification of flight hardware.
  • Worked from engineering blueprints, acceptance test procedures, and customer engineering specifications.
  • Performed electrical testing operations on hardware in accordance with work order requirements/test procedures.
  • Tested newly manufactured circuit boards utilizing test procedures written by the Ayrshire customer.
  • Developed and supported technical documentation, including updated schematics, test procedures.
  • Monitor and perform Test procedures to qualification and acceptance testing per customer.
  • Performed factory acceptance testing using various test equipment and test procedures.
  • Worked closely with engineering in developing test procedures and test equipment.
  • Developed test procedures for office and medical furniture components and systems.

Show More

2. Test Cases

high Demand
Here's how Test Cases is used in Test Technician jobs:
  • Developed test cases, currently in use, to determine if firmware was performing to the design specifications.
  • Write and execute test cases against development hardware and software while reporting results in real time.
  • Create Scenarios and perform scenario based testing; Develop, update and review Test Cases.
  • Designed simple to complex test cases, scenarios and suites with complete matrix for processes.
  • Help with development and execution of any necessary documentation, test plans and test cases.
  • Created test cases based on user stories to be performed by other test technicians.
  • Verified code correction upon release of new software versions by executing test cases.
  • Executed test cases as selected in the presence of the customer's engineers.
  • Developed, reviewed and executed Test Plans, Test Cases and Test Conditions.
  • Create Test Documents, Test Plans, Test Cases, Test Procedures.
  • Translate functional specifications, test cases and scripts into comprehensive test plans.
  • Provided feedback on test cases and test plans to improve testing methodologies.
  • Executed Test Cases, analysis and reporting with test summary reports.
  • Upload software, script debugging, and monitoring of test cases.
  • Participated in peer reviews of all the documents and Test Cases.
  • Created and executed automated test cases for medical device software.
  • Execute and validate manual test cases based upon system requirements.
  • Record results of test cases and report on any deficiencies.
  • Design Test Cases and based on specifications and customer requirements.
  • Used Quality Center to execute manual and automated test cases.

Show More

3. Circuit Boards

high Demand
Here's how Circuit Boards is used in Test Technician jobs:
  • Utilized Engineering drawings and schematics to troubleshoot printed circuit boards, pneumatic systems and mechanical systems to ensure proper operation
  • Performed daily troubleshooting and repair of component circuit boards which included reviewing design drawings, and specifications.
  • Tested finished circuit boards to ensure both digital and analog functions performed to customer satisfaction.
  • Perform functional testing on a variety of circuit boards in an electronic manufacturing environment.
  • Performed Functional Test and Troubleshooting Electronics Circuit Boards at ambient and Environmental temperature tests.
  • Tested and repaired returned circuit boards in high volume manufacturing test facility.
  • Performed testing operations on electronic circuit boards using a computer test station.
  • Processed data to test circuit boards using computer aided manufacturing software.
  • Job description: Testing and troubleshooting of company-manufactured printed circuit boards.
  • Tested functionality of software on circuit boards and provided troubleshooting.
  • Tested circuit boards to verify that they operated within specifications.
  • Tested and calibrated electronic circuit boards to verify its operation.
  • Prepared documentation for circuit boards and its operation.
  • Conducted several intricate testing tasks while troubleshooting circuit boards
  • Tested electrical continuity of printed circuit boards.
  • Test and troubleshoot electronic printed circuit boards
  • Performed debugging of electronic circuit boards.
  • Repaired non-conformance printed circuit boards.
  • Repaired circuit boards by reworking contamination under a component thereby restoring the lost confidence in the company product due to BIT.
  • Tested circuit boards using Mania Flying Probe tester and Mania Tower clam shell bed of nails tester and wrote test reports.

Show More

4. Component Level

high Demand
Here's how Component Level is used in Test Technician jobs:
  • Test and troubleshoot to component level state-of-the-art circuit boards of surface-mount and pin-through-hole construction in a manufacturing environment.
  • Connect software applications, Perform automation testing, Functional and systems troubleshooting to component level.
  • Performed component level troubleshooting of industrial instrumentation including vibration analyzers and electronic noise measurement equipment.
  • Test and troubleshoot PLC-based control systems and other microprocessor-based electronic systems to the component level.
  • Performed component level troubleshooting on high frequency switching regulators circuits requiring calibration and reset.
  • Verify production and operation of 480-600V 3-phase power units including troubleshooting to component level.
  • Participate with engineers on component level diagnostics and troubleshooting on new and existing products.
  • Facilitated component level repair and testing of military and commercial aerospace equipment systems.
  • Repaired, to component level, telecommunications equipment for Regional Bell Operating Centers.
  • Tested and debugged electronic assemblies to component level utilizing block diagrams and schematics.
  • Tested and troubleshot various electronic and cabin pressure controllers to component level failures.
  • Test and troubleshoot electronic modules to component level on medical dispensing units.
  • Diagnosed and repaired component level assemblies used for digital dictation systems.
  • Aligned, tested and troubleshot digital and digital/analog circuits to component level
  • Experience in troubleshooting analog and digital circuits at component level.
  • Performed troubleshooting to component level in the Warranty Repairs department.
  • Diagnosed electronic module failures to component level, minimizing scrap
  • Performed component level analysis of complex electronic circuit boards.
  • Manufactured electronics in-circuit testing and debug to component level.
  • Diagnose and troubleshoot medical device electronics to component level.

Show More

5. Oscilloscopes

high Demand
Here's how Oscilloscopes is used in Test Technician jobs:
  • Test performance of microprocessors infrared detectors assemblies using test instruments such as oscilloscopes.
  • Checked decoders for malfunctions and tested for signals utilizing voltmeters and oscilloscopes.
  • Tested high speed optical receivers using oscilloscopes and microscopes.
  • Bench set-up abilities using oscilloscopes, and electronic equipment.
  • Recorded data for requested tests using oscilloscopes.
  • Test equipment used includes function generators, oscilloscopes, insulation testers, high potential testers, and multiple power supply types.
  • Assemble and test Infra-red Spectrometers Testing them for proper function using oscilloscopes and Digital Millimeters to trouble shoot them.
  • Used test equipment, including computers, volume meters, voltmeter, and oscilloscopes to make precise adjustments.
  • Use power supplies, ohm/volt meters, current meters, oscilloscopes and high current generators in the lab.
  • Connect and set up oscilloscopes, meters, power analyzers, to test power electronics and control systems.
  • Read blue prints, wiring diagrams, utilize oscilloscopes, digital meters, and frequency generators.
  • Operated RF test equipment, including spectrum analyzers, oscilloscopes, and other test equipment.
  • Worked with Fluke meters, oscilloscopes, test jigs, gases and UV radiation.
  • Used test equipment such as oscilloscopes, volt meters, and data acquisition equipment.
  • Utilize oscilloscopes to view component signals and test component signal strength and integrity.
  • Experienced using test instruments such as oscilloscopes, electronic voltmeters, or bridges
  • Tested RF generating equipment with the use of Frequency generators and Oscilloscopes.
  • Repair and calibration of test equipment such as meters and oscilloscopes.
  • Use oscilloscopes to check for signal integrity during Environmental Stress Tests.
  • Calibrate and test oscilloscopes, power supplies and spectrum analyzers.

Show More

Job type you want
Full Time
Part Time
Internship
Temporary

6. Set-Up

high Demand
Here's how Set-Up is used in Test Technician jobs:
  • Executed set-up and breakdown tests per engineering instructions and conducted preliminary evaluations of tested components.
  • Performed wafer probe tests and final detector tests to predetermine specifications, and set-up and calibrate probe station prior to testing.
  • Perform the set-up, calibration, testing and troubleshooting of circuits, components, instruments, and mechanical assemblies.
  • Planned testing and made test set-ups required to analyze data to determine if product performance met product specifications.
  • Perform vehicle set-ups, utilizing all types of instrumentation on full build, current and prototype vehicles.
  • Organize jobs to include preparation, set-up, testing, clean-up, and arrange reports.
  • Prepare the test set-up for airplane seat certifications as per the test plans and drawings.
  • Assisted in set-up of 15 different test fixtures that tested Ford Motor Company suspension components.
  • Work included set-up and tear down of unique systems which required innovation and forward thinking.
  • Learned operation, testing procedures, and equipment set-up on 15 different power supplies.
  • Developed special test set-ups and test fixtures, also wiring harnesses and circuit designs.
  • Perform set-up on insulating machine- produce cable to size and insulation per work order.
  • Perform hand set-ups for AC and DC digital test on programmable AC auto-tester.
  • Recognized failures and set-up concerns, and determined the correct course of action.
  • Recognize failures and set-up problems, and determines the need for appropriate verification.
  • Configured software and hardware test set-up benches for appropriate vehicle airbag test.
  • Certified test set-ups for static and dynamic testing of monuments and seats.
  • Performed the set-up, testing and troubleshooting of network storage appliances.
  • Used forklift and genie lift to assist in test set-up.
  • Assisted in set-up of MTS 329 and 4-Post Road Simulators.

Show More

7. PCB

high Demand
Here's how PCB is used in Test Technician jobs:
  • Verify electrical test failures, performed horizontal/vertical sections of PCB failure location.
  • Researched experimental technology, developed PCB assemblies and generated requisitions.
  • General purpose PCB assembly/modification using METCAL soldering station.
  • Debugged and repaired manufacturing PCB.
  • Communicate with management and other departments of ongoing errors: incorrect components placed, damaged PCB's and any other issues.
  • Performed preventive maintenance, repair, installation, and calibration of ventilator Gas Delivery Engines and Trans Com Alarm PCB's.
  • Repair burned and damaged laminate PCB with epoxy to make equal to new appearances and repair damaged surface mount pads/land.
  • Authored troubleshooting guides for proprietary Printed Circuit Boards (PCB) to decrease the amount of time needed for troubleshooting.
  • Performed test and troubleshoot on systems, PCB, and down to component level of both analog and digital circuits.
  • Build and repair prototype circuits, test fixtures, and board tester PCB in both through hole and surface mount.
  • Involved in to debug the various models of PCB boards and taken care of needful modification into the fixtures.
  • Repair, utilize and maintain seven automated test stands to ensure proper testing of THAAD Seeker CCA PCB's.
  • Test, program and repair PCB boards from various gaming companies for their slot machines and gaming tables.
  • Handled high volume work on PCB touch-up wiring, color Instructions, and soldered parts on PCB manually.
  • Evaluated and repaired PCB computer boards and box build assemblies to ensure quality and effectiveness of all parts.
  • Followed layout or diagram to solder various components on PCB per customer request or for engineering develop.
  • Test technician Level 1 abilities including programming, tuning, and testing PCB boards and assembled units.
  • Test, rework, and debug Printed Circuit Board (PCB) assemblies down to component level.
  • Set up and load software program to PCB as well as upgrades from old to new version.
  • Build PCB's prototype, stuff, solder, wring, touch-up and rework per rework instructions.

Show More

8. Trouble Shooting

high Demand
Here's how Trouble Shooting is used in Test Technician jobs:
  • Performed a wide range of electrical and mechanical trouble shooting operations associated with company and customer owned products.
  • Performed Equipment maintenance/trouble shooting to component level.
  • Set up and conducts tests, develop products for trouble shooting, repair and assembly, and other technologies as needed.
  • Conducted quality assurance procedures to inspect all factory production lines, detected and provided suggested trouble shooting to correct quality issues.
  • Trouble shooting units by performing diagnostic tests and replacing faulty motherboards, processors, RAM, and other mechanical hardware components.
  • Tool diagnostics, trouble shooting, and improvement of processes are my expertise in FBAR, HBT, & HEMT.
  • Coordinate, analyze, select and perform trouble shooting and test services for problem resolution and complete equipment turn-up.
  • Performed electrical testing and trouble shooting of both AC and DC systems ranging from 12 VDC to 10 KVA.
  • Performed trouble shooting to the component level, including replacing defective components, to proper FAA soldering specifications.
  • Cross trained 5 team members in telephone and advance trouble shooting for data Provide support to engineering dept.
  • Perform basic trouble shooting encompassing multiple variables and Unknowns to achieve root cause analysis and problem resolution Conduct.
  • Trouble shooting, microscope inspection for burn or broken circuitry on the ASIC cause by the Probe.
  • Test, trouble shooting, quality mil spec 2000 on circuit boards for military contracted devices.
  • Side trouble shooting with a team to resolve manufacturing issues while maintaining shipping dates.
  • Maintained good phone skills dealing with techs out in the field trouble shooting problems.
  • Trouble shooting and repair of systems and test stands to the modular level.
  • Trouble shooting skills to figure out what is causing certain shutdowns on tests.
  • Assist in performing trouble shooting and fault isolation on engineering development prototype parts.
  • Repair of testing and production equipment including major rebuilds and trouble shooting.
  • Performed the installation of operating system/software, inspection and trouble shooting.

Show More

9. PCS

high Demand
Here's how PCS is used in Test Technician jobs:
  • Tested/repaired and installed software for custom PCs for both single and multiprocessor configurations.
  • Performed reliability and functionality tests on PCs.
  • Performed various call test locating Alpha, Beta, Gamma sectors, observing soft handovers, also conducting PCS Data Test.
  • Performed NPCS (paging GL3000) and MVP switching system SW and HW integration, testing, configuration and trouble shooting.
  • Supported new product factory introduction (NPI) for 3G generation products (GSM, PCS and CDMA bands).
  • Tested various Entertainment and Edutainment products on a matrix of PCs and Macs.
  • Diagnosed and resolved common issues affecting products including PCs, laptops and printers.
  • Assembled various models of PCs that met requirements and standard for industrial-use environments.
  • Assembled and troubleshot PCs, installed Windows operating system and test programs.
  • Conducted imaging of Linux and Windows servers & PCs.
  • Imaged and cloned PCs for end user implementation.
  • Maintain company internal computer network and desktop PCs.
  • Assembled and test HP compatible PCs and peripherals.
  • Performed Software download & Test on IBM / OEM Servers and HP Laptops / PCs.
  • Acquired radio frequency data using programmable mobile phones and laptop PCs to verify satellite signal in Puerto Rico.
  • Test and troubleshoot pcs and modules at computer test stations for the Defense/Aviation industry.
  • Performed various quality checks and tests on RAIDsReplaced various internal components in test PCs
  • Build and perform tests for government contracts on micro pcs and semiconductors.
  • Develop and build test simulations for customized PCS switchgear.
  • Tested and diagnosed PCs and Laptops Troubleshot and repaired to system level Experienced in new employee training and orientation

Show More

10. ISO

high Demand
Here's how ISO is used in Test Technician jobs:
  • Utilized O-scopes, DVM, Logic Analyzers and application specific designed testing fixtures to isolate faulty components inserted during manufacturing process.
  • Assisted company s job-site supervisors with the formulation of solutions for technical barriers for welding inspection and materials whenever required.
  • Recorded data and reported data to supervisor on excel using all required laboratory equipment needed to complete task.
  • Communicated with team supervisor on a constant basis to ensure work was prioritized according to company expectations.
  • Recorded new wall-thicknesses and compared to previous thicknesses and reported results to my engineering supervisor.
  • Implement urine collection protocol, policies and procedures as directed by supervisor and regulatory requirements.
  • Key holder and task management supervisor/coordinator, stock and floor replenishment coordinator and display supervisor.
  • Provide support in solving Hi-Cap trouble calls by performing initial troubleshooting/diagnostics and fault isolation procedures.
  • Recorded discrepant materials in reporting systems and isolated them for quality engineering review.
  • Increased effectiveness by isolating problem and accelerating referral to appropriate work group.
  • Rerouted call traffic when isolation occurred and traced calls in emergency situations.
  • Isolated and resolved circuit trouble utilizing computerized remote test accesses and databases.
  • Evaluated problems to make initial recommendations for possible corrective actions to supervisor.
  • Participated in all other test department activities as directed by supervisor.
  • Performed supervisory roles and interfaced with customers in absence of Manager.
  • Provided technical reports and daily updates to supervisor and engineers.
  • Recognized and isolated test equipment failure for repair and correction.
  • Trained technicians and developed effective relationships with co-workers and supervisors.
  • Conduct fault isolation and repair activity to component level.
  • Initial Troubleshooting using component isolation techniques known issue documentation.

Show More

11. Spectrum Analyzer

high Demand
Here's how Spectrum Analyzer is used in Test Technician jobs:
  • Test & troubleshoot antenna designs employing spectrum analyzers, network analyzer and cellular base station simulation equipment.
  • Worked extensively with Signal generator, Frequency counter, Spectrum Analyzer and Voltmeter.
  • Programmed Spectrum Analyzer to outputted signal data into a computer.
  • Perform antenna sweep using spectrum analyzers.
  • Calibrated Spectrum Analyzers daily before use.
  • Connected unit to be tested to test equipment, such as signal generator, frequency meter and spectrum analyzer.
  • Used tools such as spectrum analyzer to test radio antennas, cables, and other components of the PRT.
  • Calibrate and test MW boards and synthesizers for FLEX systems using Spectrum Analyzer, VNA, and Signal Analyzer.
  • Test manually on debugged RF CCA's using QCRT, Spectrum analyzer and Function Generator.
  • Use Spectrum analyzer to check eye diagrams, and impedance mismatch throughout a conductor.
  • Used spectrum analyzer, voltmeter, power generator and other electrical test instrument.
  • Utilized Spectrum Analyzers to test for signals in the Filter unit.
  • Tested, troubleshoot, and repaired traps and spectrum analyzers.
  • Test laser diodes using oscilloscope and spectrum analyzer.
  • Be able to use the CDMA mobile station test, the spectrum analyzer and the scope.
  • Debug using multimeters, spectrum analyzers and other electronic equipment.
  • Tested and troubleshot miniature electronic digital and RF boards using oscilloscope, spectrum analyzer, and multimeters.
  • Used the oscilloscope, multimeter, spectrum analyzer and x-ray machine.
  • Use of Hewlett Packard: 3589A Spectrum analyzer; 3326A Two Channel synthesizer; 1142A Differential probe; 6038A Power supply.
  • Identified failures using signal generator, spectrum analyzer, high frequency probe, and multi-meter.

Show More

12. Customer Service

high Demand
Here's how Customer Service is used in Test Technician jobs:
  • Monitor and maintain adequate laboratory supplies, and provide excellent customer service to both external and internal customers.
  • Managed internal web-database information and provided superior customer service to both business and engineering teams within multiple projects.
  • Input and analyzing data utilized for product development Skills Used Organizing Inventory Management Clerical Customer Service
  • Received letters of praise from customers and managers externally for excellent customer service.
  • Escalated repair requests to ensure timely maintenance and maintained accurate customer service records.
  • Provided high-level customer-focused customer service by confirming issue resolutions directly with customers.
  • Work with customer service representatives to eliminate start up and operating concerns.
  • Supported customer service group to result products failure and improve manufacturing quality.
  • Provided customer service responses to help desk personnel regarding system operations.
  • Provided technical assistance to customer service, technical service and manufacturing.
  • Designed and implemented the Customer Service Travel Compensation pay system.
  • Support customer service department for technical problems.
  • Provided technical support for customer service area.
  • Deal with confidential information, customer service
  • General student/customer services and support.
  • Developed the process for the transfer of the Customer Service blueprint books to electronic format and processed the first twenty books.
  • Work within a team on pump crews to achieve maximum customer service when installing or pulling pumps from wells.
  • Edit supply transactions, or provides customer service for urgent critical shortage items and other items requiring special handling.
  • Provide exceptional customer service, in addition to troubleshooting and repair of hardware, software and connectivity issues.
  • Use of measuring devices and testing meters; excellent communications with all involved for best customer service.

Show More

13. Failure Analysis

high Demand
Here's how Failure Analysis is used in Test Technician jobs:
  • Performed accurate failure analysis testing protocols on returned customer connectors and cable assemblies to identify tolerance levels and manufacturing improvement opportunities.
  • Use problem tracking tools to effectively monitor failure analysis, corrective actions and continuous process improvements.
  • Specialized in executing engineering probe, electrical failure analysis, and production lot disposition of product.
  • Compared test data to industry specifications; generated reports including product statistical and failure analysis.
  • Supported all manufacturing and engineering groups by root cause of component and material failure analysis.
  • Conducted failure analysis computer hardware and software problems from customer computer return for repair.
  • Provide documentation of all calibration, quality and failure analysis accomplished.
  • Collect pass/fail data and generate failure analysis report, implemented solutions.
  • Conduct and communicate failure analysis to promote laboratory precision and consistency.
  • Maintained failure analysis records in database which reduced future troubleshooting time.
  • Performed initial failure analysis on motherboards that arrived for repair.
  • Write comprehensive reports on failure analysis performed on failed devices.
  • Complete failure analysis paperwork and provide information to reliability engineer.
  • Performed failure analysis and material/component testing on Hil-Rom Birthing Beds.
  • Provided failure analysis reports for internal and external customers.
  • Assist quality engineers with failure analysis of defective components.
  • Perform and provided failure analysis as requested by customers.
  • Interfaced with engineering on manufacturing and failure analysis issues.
  • Monitored defect trends and performed low-level failure analysis.
  • Perform failure analysis/use accepted problem solving techniques.

Show More

14. Hand Tools

high Demand
Here's how Hand Tools is used in Test Technician jobs:
  • Test RF & Wireless IC chips, set-up test devices, used of small hand tools, calibrate, ESD environment.
  • Use of manual and electronic measuring equipment, power and hand tools, computers, scanners, and various housekeeping items.
  • Test aerospace parts in accordance with AS9100 and applicable publications using hand tools to install parts on test stand.
  • Disassemble and reassemble instruments and equipment, using hand tools, to inspect the instruments and equipment for defects.
  • Assemble Panels by wiring print, specification sheet, and Bill of Material using electrician s hand tools.
  • Skilled in the use of all basic hand tools, electronic test equipment including optical measurement devices.
  • Test IC chips, set-up test devices, use small hand tools, maintained logs, ESD environment
  • Failed units are inspected and repair to GE specifications using soldering iron and hand tools.
  • Use test instruments and hand tools to perform a variety of optical test operations.
  • Debug mechanical assembly using hand tools, calipers, micrometers and inspection under microscope.
  • Test and repair Universal Relays (UR) using tester machines and hand tools.
  • Use various tools such as sophisticated soldering equipment and hand tools to repair equipment.
  • Performed performance tests on power and hand tools for Milwaukee Electric Tool Corporation.
  • Trained and work with hand tools, meters electronic and manual test instruments.
  • Hand tools crimping cable hardness as well as running wires point to point.
  • Use different types of tools such as precision and hand tools.
  • Use of hand tools to set up and break down equipment.
  • Develop, maintain and inventory specialized test equipment and hand tools.
  • Work in shop environment with hand tools and power equipment.
  • Make minor repairs using Basic Hand Tools and various Gauges.

Show More

15. Final Test

average Demand
Here's how Final Test is used in Test Technician jobs:
  • Facilitated test procedure improvements for equipment testing and operations, thereby reducing final testing time and documentation errors by 30%.
  • Recorded video documentation of ship ready panels after final testing/programming and labeling.
  • Performed final test and inspection to ensure software configuration meets customer specification.
  • Developed software to interface with manufacturing database at final test.
  • Performed assembly adjustments and final testing to meet engineering specifications.
  • Generated preliminary to final test results of telecommunications technologies.
  • Connected units in fixture and ran focus test program on lens; then installed focus cap and parts for final test.
  • Tested and performed a post functional check, and a final test (FST) of a thermal weapon sight.
  • Supported final assembly, perform final test, and functional verification an average of 350 systems per quarter.
  • Perform the Final test to ensure all the functions of machine working well after overnight burning test.
  • Receive unit from weld perform evaluation and repeat process before sending for final testing in test area.
  • Assign and log serial numbers for all final tested units, complete appropriate data sheets and documentation.
  • Move all completed final test to store room or have them ready for pick up or shipping.
  • Supported the manufacturing line for the final test of modems including troubleshooting and maintenance of test stations.
  • Maintained the various testers and mechanical handlers used in both wafer and module final test operations.
  • Key responsibility was to performed final testing and troubleshooting of high and low voltage power supplies.
  • Perform the initial and final testing of various power supplies using Analog and Digital test equipment.
  • Form, adjust and final test yokes on various applications for both civilian and military use.
  • Computed liquid test data for final testing requirement to ensure proper installation and assembly of products.
  • Presented calibration and all final tests, NVR Verify, CISCO Router and RX Sensitivity test.

Show More

16. Preventative Maintenance

average Demand
Here's how Preventative Maintenance is used in Test Technician jobs:
  • Tested and troubleshot multiple customer products to component level while providing customers with preventative maintenance measures.
  • Analyzed historical, preventative maintenance and predictive maintenance data and made recommendations for reliability improvement.
  • Evaluated, collected information on, and repaired specialized test equipment for preventative maintenance project.
  • Execute monthly preventative maintenance of lab equipment to ensure all equipment is functioning properly.
  • Performed preventative maintenance on test equipment Interfaced with engineers and support staff.
  • Reduced test equipment down time by establishing a preventative maintenance schedule.
  • Developed and maintained instrument calibration, equipment preventative maintenance schedules.
  • Perform preventative maintenance activities according to the preventive maintenance schedule.
  • Maintain equipment logs and preventative maintenance records as required.
  • Conducted machinery qualification from start-up to preventative maintenance.
  • Performed routine inspections and preventative maintenance of equipment.
  • Managed the preventative maintenance of building facilities.
  • Maintained Equipment through repairs and preventative maintenance.
  • Perform preventative maintenance for production test equipment
  • Perform preventative maintenance on test equipment.
  • Performed preventative maintenance of processors.
  • Perform complicated/unique preventative maintenance tasks.
  • Organized a new preventative maintenance plan for all remote hub locations throughout Indiana which is still in use today.
  • Perform preventative maintenance & troubleshooting test machines parts such as motor starters, switches, relays, etc.
  • Performed instrument QC, calibration, preventative maintenance, and tuned lasers for optimal operation performance.

Show More

17. Technical Support

average Demand
Here's how Technical Support is used in Test Technician jobs:
  • Conducted and provided technical support to Product Engineer at Delphi Saginaw Steering Systems for optimization of hydraulic power steering systems.
  • Provide technical support to aftermarket engineering for windshield wiper applications for a leading manufacturer and supplier to the automotive industry.
  • Assisted technical support department with solutions to address customer concerns and field-testing problems.
  • Verified and provided engineers with technical support during device test and evaluation.
  • Provided technical support to other focus factory technicians.
  • Maintained productions line and provided technical support.
  • Corrected tier one level tickets and coordinated with appropriate field maintenance group for correction of service calls requiring on-site technical support.
  • Provided Tier 1 technical support for E911 PSAP's (Public Safety Answering Points) throughout the BellSouth 9-state region.
  • Configure, and troubleshoot data communications network, access control system, and provide technical support to engineering team.
  • Applied leadership skills and coordinated circuit repair between outside technicians, Central office technician, technical support and customers.
  • Provide all the technical support to the computer usage and managed all the network stations up and running.
  • Provided technical support, troubleshooting and customer support for AT&T with their DSL products.
  • Provided technical support to scientist in a research lab building test fixtures and other assorted duties.
  • Provided end user technical support 24x7x365 on customer's applications, network, and equipment configuration.
  • Provided technical support to engineers on complex components, material, products, prototypes and equipment.
  • Address customer inquires on application, system and component function and related field technical support.
  • Performed technical support, resolved network and passwords for over 12,000 LAN/WAN users.
  • Provided electronics technical support to all aspects of testing, analyzing test plans.
  • Provide technical support to customers related to operation, maintenance and tool issues.
  • Provide technical support for all related duties in the engineering area as required.

Show More

18. Data Acquisition

average Demand
Here's how Data Acquisition is used in Test Technician jobs:
  • Monitored, record, analyzed, and interpreted data for engineering analysis from numerous data acquisition systems.
  • Major responsibilities include setting up and collecting data on prototype vehicles using SOMAT data acquisition equipment.
  • Analyzed equipment control and data acquisition programming in LabView and MTS proprietary system software.
  • Performed instrumentation of testing equipment for data acquisition in vehicles and test cell applications.
  • Worked with data acquisition for compressors using computerized programming equipment and Microsoft Excel.
  • Created control and data acquisition software interfaces to safely perform hazardous tests.
  • Designed complex state machines for test stimulus manipulation and data acquisition.
  • Tested incoming material to specifications and recorded results through data acquisitions.
  • Collected data using manual & automated test/data acquisition systems.
  • Instrument application and data acquisition.
  • Experienced in the use of data acquisition software & hardware (Hydra data acquisition, Visual Basic, etc.)
  • Test set-up and data acquisition for a variety of functional and performance tests on automotive equipment.
  • Connect and operate computerized data acquisition systems to observe, record and review test data.
  • Performed tests and data acquisitions for pumps tested within the vertical and horizontal test labs.
  • Install and remove various data acquisition systems as well as operate for testing purposes.
  • Set up a data acquisition system to obtain data from a traction motor test.
  • Design and create custom test fixtures for data acquisition equipment.
  • Operated and ran all hydraulic stands and data acquisition systems.
  • Operate Data Acquisition software to collect and process relevant data.
  • Perform data acquisition of sampling systems at beginning of tests.

Show More

19. Linux

average Demand
Here's how Linux is used in Test Technician jobs:
  • Installed and use varies software with each integrated product line such as MS Windows Professional 2000, XP Home and Linux.
  • Tested on multiple platforms and operating systems such as Linux, MS DOS, Windows, and Java.
  • Work closely with development team, program automation or test scripts use Linux or Windows based applications.
  • Experience with Linux Ubuntu (Server and Workstation) and CentOS, including the Gnome UI.
  • Installed and configured a Linux server running Fedora and CentOS to communicate across a LAN.
  • Install and maintain hardware/software on HPUX, Linux, and Windows servers providing improved reliability.
  • Worked in a group of test engineers testing IBM server storage in a Linux environment.
  • Build Red Hat and Debian Linux based enterprise servers for Amazon, Twitter and Facebook.
  • Augmented my systems skills installing Windows and Linux Servers with test and customer purchased software.
  • Experience in MS Office and installing Windows 7, XP and Linux operating systems.
  • Test Fusion-Io cards and program the correct firmware on the cards with Linux servers.
  • Installed and coded subsidiaries of LINUX systems such as RED HAT and CENTOS.
  • Programmed network management modules, some using Linux, with File Transfer Protocol.
  • Stress test components under various platforms including Mac, Linux, and Windows.
  • Mentored new hires on Linux, issue tracking, and test procedures.
  • Installed and configured Linux Red-Hat, CentOS, Fedora, and Ubuntu.
  • Scrap hard drives and memory disks using Linux operating software.
  • Debugged the products with special Linux software and OS.
  • Experienced in a variety of Linux environments.
  • Validated Linux and Windows CE drivers.

Show More

20. Surface Mount

average Demand
Here's how Surface Mount is used in Test Technician jobs:
  • Initiate and contribute to the development of a comprehensive skills and abilities soldering program utilizing surface mount and through-hole assembly technology.
  • Performed board level modifications to development hardware with surface mount and through-hole components.
  • Repaired and replaced surface mounted integrated circuits.
  • Tested and repaired Meter Testing Units and Data Collection Units involving RF circuits and surface mount technology down to component level.
  • Performed first pass tests on circuit cards and graphics computer work stations, through hole and surface mount technologies.
  • Performed computer driven tests (utilizing LabVIEW Software) on surface mount PWB's and radios.
  • Test, inspect, and troubleshoot down to component level newly manufactured surface mount electronic assemblies.
  • Developed the ability to solder on printed circuit boards with through and surface mount technology.
  • Tested and troubleshot to component level various through-hole and surface mount printed circuit boards.
  • Repaired surface mount and through hole on PC boards using variety of soldering equipment.
  • Surface mounting of micro-chips and testing them to ensure proper testing was completed.
  • Repaired and replaced circuit board components both surface mount and pin through hole.
  • Operated the surface mount machine and periodically worked on the assembly line.
  • Soldered to remove and replace surface mount and through hole electronic components.
  • Used soldering station to repair through hole and surface mount components.
  • Provided support on soldering to the Surface Mount Department when needed.
  • Test Technician, troubleshoot, repair surface mount circuit boards.
  • Inserted and soldered surface mount components to printed circuit boards.
  • Perform surface mount solder assembly and rework, mechanical assembly.
  • Performed soldering repairs to the surface mount assemblies.

Show More

21. High Voltage

average Demand
Here's how High Voltage is used in Test Technician jobs:
  • Performed Fiber Optics Reconditioning Utilized various OS applications for testing Worked safely with High Voltage units.
  • Conduct acceptance testing of high voltage electrical components.
  • Tested and inspected quality high-end /high voltage process remotes and communication equipment for Applied Materials, INTEL and Key Technology corporations.
  • Provided test of high voltage switches, circuit breakers, voltage transformers, and current transformers on Mobile Substations.
  • Load test electric traction drives under high voltage/current and complete all test reports using a Microsoft Access program.
  • Test high voltage power converters for light rail applications through a voltage range of +/- 15V to 2000V.
  • Used lab view based automated system to calibrate and to troubleshoot the high voltage medical imaging (MRI)
  • Test all components and completed parts to IEEE specs for high voltage corona levels and high potential.
  • Concentrated experience in broadband video amplifiers, high voltage deflection amplifiers, and high speed switching circuits.
  • Perform a series of High Voltage and Radiation tests on Linear Accelerator to ensure proper operating conditions.
  • Perform high voltage testing on all new equipment for manufacturer defects before releasing equipment into the field.
  • Harness multiple high voltage modules together to charge and balance to 100% state of charge.
  • Design and installation of test circuit to perform high voltage testing of power distribution transformers.
  • Tested and calibrated high voltage DC power supplies; troubleshot power supplies as needed.
  • Tested High Voltage medical imaging products (MRI), and tested power supply.
  • Inspect, calibrate, test, and troubleshooting of high voltage power supplies.
  • Assemble and test Low and High voltage Power Supplies for the Saturn system.
  • Supported with additional testing of high voltage drive units and other electrical devices.
  • Tested and repaired RF power amplifiers, low and high voltage power supplies.
  • Perform high voltage testing on all line equipment in a controlled environment.

Show More

22. R

average Demand
Here's how R is used in Test Technician jobs:
  • Collect specimens from clients *Communication skills *Paperwork/Report results to appropriate figures *Prepare specimen samples to be mailed to laboratory *Housekeeping
  • Collaborated with electrical engineers in the prototype circuit/board/sub-system design, wiring harness design, and system integration.
  • Developed calibration system for test equipment and designed tagging system to flag equipment out of calibration.
  • Implemented inventory control procedures to organize lab supply room and improve efficiency.
  • Selected appropriate test equipment and configured it based on test specifications.
  • Train field technicians on configuration of customer premise equipment.
  • Disseminated all pertinent data received to determine pass/fail status.
  • Carried out calibration of various gauges/instruments & maintained record.
  • Worked overtime as necessary to support critical customer commitments.
  • Worked closely with Quality Assurance/Engineering in performing failure investigations.
  • Developed and executed various tests on latest Microsoft Hardware.
  • Assembled numerous servers for initial system test company procedures.
  • Assist engineering with any ongoing investigations / initiatives.
  • Created various databases to assist engineering and production.
  • Documented fiber spool test and laser re-termination procedures.
  • Changed liquid nitrogen tanks and performed preventive maintenance.
  • Fixed and repaired naval salinity and temperature modules.
  • Reported and analyzed test results for failure analysis.
  • Tested and operated electrical components and systems.
  • Provide process development solutions for customer-specific applications.

Show More

23. Data Entry

average Demand
Here's how Data Entry is used in Test Technician jobs:
  • Utilized Hewlett-Packard's Quality Center application for manual and automated test execution, defect documentation, and data entry.
  • Performed clerical and data entry functions to support testing documentation.
  • Completed required paperwork or data entry per instructions.
  • Developed software and Office macros to assist with data entry, photo and table population in reports, and file management.
  • Performed asphalt material tests following ASTM standards, and carried out data entry work on tested material.
  • Blueprint /schematics reading, calibration of the test equipment, digital caliper usage and data entry.
  • Load, configure, and test all hard drives and electronic equipment's and data entry.
  • Provide training on properly inputting test score data entry into MIRS to all testing personnel.
  • Used Microsoft Windows95 to Windows XP for correspondences, data entry, and product tracking.
  • Gathered data on GIS map attributes; and performed data entry and data quality control.
  • Created data entry spreadsheet for ASTM standard to be used for entire floor care department.
  • Assisted officers with drug testing and data entry duties in probation offices.
  • Greet patients, answer phones, and patient data entry.
  • Process Control Monitoring, and Data Entry into PC database/spreadsheets.
  • Perform daily and weekly data entry on projects approaching completion.
  • Recorded Data Entry correctly in SAP and shop Floor.
  • Performed computer data entry and assisted in client intake.
  • Record work performed and computer data entry.
  • Drug testing technician and data entry
  • Perform functional testing and troubleshooting of medical equipment Complete relevant paperwork and data entry to document FDA compliant testing

Show More

24. SMT

average Demand
Here's how SMT is used in Test Technician jobs:
  • Performed functions to include assembly, test, and debug of electronics assemblies, SMT PCB, and integrated systems.
  • Experienced in using High and Low Temp Soldering techniques to rework on through-hole and SMT for nonconforming components.
  • Perform test failure analysis, rework and repair on fine pitch SMT PCB, and clarify data records.
  • Modified system hardware by changing resistors (down to 0402 SMT) and/or crystals for test compliance.
  • Skilled in SMT soldering, oscilloscope use, various hand tools, phone and computer skills.
  • Job responsibilities were to supervise personnel testing new boards from SMT to ensure timely availability.
  • Test Technician, Troubleshoot boards, SMT and surface mount AOI, Electronic assembly
  • Rework all types of SMT and through-hole devices within the Engineering Laboratory.
  • Experience with SMT assembly and rework, and manual or automated soldering.
  • Performed in process audit of SMT assembly line and solder joint Inspection.
  • Performed microscopic soldering of SMT based electronics and circuit board re flow.
  • Experienced to support SMT and familiar to fix SMT machine problems.
  • Manufactured various circuit boards using (SMT) Surface Mount Technology.
  • Install and replace components as needed; SMT and Through Hole.
  • Recorded results of 1st piece tests for SMT In-Circuit tests.
  • Hand soldered SMT components to IPC J-STD-001 class 3 standards.
  • Replace (damaged or broken) SMT board pad.
  • Solder and rework SMT and through hole components.
  • Assisted in testing QMS testing and SMT operator.
  • Worked on SMT systems and harness assembling.

Show More

25. Data Collection

average Demand
Here's how Data Collection is used in Test Technician jobs:
  • Resolve minor computer problems with navigation and data collection software and post-processing.
  • Maintain data collection and reported root cause analysis for manufacturing sites.
  • Perform data collection and data analysis for experiments and validation testing.
  • Performed FCC mandated emergency services testing and various types of end-user data collection as requested by major cell phone service providers.
  • Assisted other departments as needed, experienced in Quality and Virtual Customer Test areas, assisted engineers in data collection.
  • Operated, maintained and upgraded a suite of electronic equipment dedicated to cellular data collection, storage and wireless transfer.
  • Managed teams of 3 to 8 technicians; reviewed their data collection methods and verified project documents and findings.
  • Performed head and media electrical test, data collection, and document testing results in support of new product development
  • Assure the highest quality in data collection while providing as needed up to date information for clients and customers.
  • Traveled to airports around the country to conduct field-testing for data collection on airport security surveillance systems.
  • Executed the testing and data collection for the upgrading of the 9-1-1 Emergency Network and radio equipment.
  • Created DTAR, DIP, data collection, report & analysis test result to Engineering.
  • Run mobile and PC applications for data collection and utilize Nomad box for E911 tests.
  • Record and input test results and repair information into a maintenance data collection system.
  • Prepare notes, sketches, and observations associated with test setup and data collection.
  • Use of computer for data collection and controls of Seattle Sled and Servo Sled.
  • Incorporated data collection system for test floor, and trained co-workers in its applications.
  • Used automated data acquisition and control test stations for data collection and saving.
  • Perform various ICT tests, data collection and statistical analysis of manufacturing.
  • Operated Dos based test stations linked by Excel based data collection program.

Show More

26. Hvac

average Demand
Here's how Hvac is used in Test Technician jobs:
  • Ensured proper functioning of HVAC equipment to meet engineer's specifications and implemented proper operations.
  • Measured temperatures, pressures, and electrical characteristics to properly evaluate a commercial HVAC system.
  • Test electric motor controls, protection and variable frequency drives for industrial compressors used on HVAC units mainly for McQuay International.
  • Tested door, propulsion, braking, and HVAC systems to assure compliance with procedures and requirements set forth by the authority
  • Provided technical drawings and reports so the owners and engineers knew that the HVAC and exhaust systems are working as designed.
  • Test Technician / Field Service Technician*Responsible for testing, diagnosis and repair of passenger rail car HVAC units at NYCT warranty sites
  • Test, adjust and balance air and water flows at varying types of HVAC equipment Troubleshoot and evaluate engineering design.
  • Used specialized equipment to identify, monitor and provide timely solutions for the functionality and performance of HVAC equipment.
  • Balance, test, troubleshoot, repair, and program commercial HVAC equipment at multiple public and government facilities.
  • Serviced and tested GSE; Air Starts, Load Banks, Auxiliary Power Units, and HVAC units.
  • Performed operational test of HVAC and trailer functions of mobile, MRI, CT and PET scanners.
  • Develop software for HVAC controls, based on a specification as well as customer needs and feedback.
  • Tested the HVAC by checking the temperatures and getting the right voltage on certain locations documenting the results
  • Test and Balance HVAC Systems, Water Pressures, Air Particle Counting, and Room Pressures.
  • Calibrated air handlers, adjusted sheaves and implemented HVAC design specifications in many buildings on campus.
  • Identify, inspect, and assess HVAC Air and Water Systems for commercial and residential buildings.
  • Read and analyzed blueprints of building to determine the layout of HVAC and water systems.
  • Perform testing and balancing of HVAC Air and Water Systems for commercial and residential buildings.
  • Performed measurement and adjusting of air and water flows at varying types of HVAC equipment.
  • Investigated existing HVAC systems to solve ventilation, temperature or indoor air quality problems 20.

Show More

27. Test Systems

average Demand
Here's how Test Systems is used in Test Technician jobs:
  • Follow the laboratories established corrective action policies and procedures whenever test systems are not within the established acceptable levels of performance.
  • Designed efficient and portable computer automated avionics maintenance test systems, used to test auxiliary power units in commercial avionics.
  • Transferred proprietary HP-IB analog to digital converter test systems from National Semiconductor to remote test house in Santa Clara California.
  • Document all corrective actions taken when test systems deviate from the laboratory's established performance specifications.
  • Performed extensive troubleshooting of large business circuits via proprietary remote test systems.
  • Operated Automatic Test Systems, Thermal and Vibration Environmental systems.
  • Test systems on customer equipment for compatibility and quality.
  • Assist in assimilating test systems into manufacturing facilities.
  • Job Duties: Work in a production area fail analysis Dept, performing assembly and integration of computer based test systems.
  • Trained and certified over 15 operators on use of laser test systems and burn-in ovens including monitoring of SPC.
  • Provided engineering hardware support for testers, and installed all EC's and upgrades to Product Test systems.
  • Operate and use test equipment, test systems, instruments and tools as required to accomplish work assignments.
  • Maintained and operated MATLAB-based test systems to verify conformance of Fast Ethernet devices to IEEE 802.3 standards.
  • Obtained proficiency on 3 primary test systems within 2 weeks, the remaining 4 within 6 weeks.
  • Set up and calibrated test systems as well as related equipment per work instructions and test procedures.
  • Aided in the lay out and development of test systems used for customer equipment under test.
  • Automated Test Technician 2010 to 2013 Provided support to test engineers for developing automated test systems.
  • Design, fabricate and analyze test systems, materials, components, software and methodologies.
  • Tested and repaired to the component level using VXI, Z1800 and L621 test systems.
  • Repair, testing and troubleshooting of robotic computer controlled test systems to the component level.

Show More

28. QA

average Demand
Here's how QA is used in Test Technician jobs:
  • Perform QA/QC validation for issues regarding mechanical and software configuration prior to customer delivery.
  • Follow all manufacturing guidelines and principles established by QA and engineering.
  • Served directly under Lead Technician as top producer of most units debugged and repaired with minimal QA returns to test department.
  • Log in sensors onto Excel and QA sign for them, prepare boxes with correct labels and push to inventory room.
  • Helped to identify and eliminate breakdowns in line build department, thereby ensuring improved QA and fewer test failures overall.
  • Documented all findings of imperfections then reported them to QA Manager and Engineers to prevent further production of defected parts.
  • Created database use for tracking and reporting tested system result and outputting the results to the final QA report.
  • Performed every aspect of the refurbishment process except for the actual repair, refurbishment of the phone and QA.
  • Acquired NQA-1 level 2 in house certifications for soils field, concrete field, and concrete laboratory testing.
  • Performed failure analysis testing of returned units and work directly with QA Engineer in preparing Failure Analysis Reports.
  • Performed QA regulatory and contract testing on corporate payroll systems from KRONOS, SAP to proprietary applications.
  • Interfaced with packaging, QA, FA and Reliability groups to improve the product quality and reliability.
  • Assisted with successful floor audits involving production, test and QA of SUN servers and products.
  • Performed Failure Analysis (FA) and Quality Assurance (FA/QA) for customers.
  • Worked independently as sole weekend lab technician, coordinating production throughput and QA issues.
  • Certified NQA-1 Inspection for (Level 2) Pre-Placement, Placement, Post Placement,
  • Completed extensive training and certification through SCEA FPQA in Functionality and TRC standards testing.
  • Prepare work and training process, and propagate changes throughout the QA test floor.
  • Performed QA tests of electrical and mechanical systems on Boeing's 787 Dream liner.
  • Developed and created top level reports and presentations to QA and Global Sales Groups.

Show More

29. ESD

average Demand
Here's how ESD is used in Test Technician jobs:
  • Maintain certifications in Harness fabrication, ESD awareness, crimping process, torquing process, contamination control and documentation process.
  • United StatesDuties: Tested and performed component level repair on PWB used in alarm systems and order wire equipment.
  • Served as Electro-Static Discharge Sensitivity (ESDS) monitor in primary work area for over a year.
  • Tested soldering equipment and static mats for ESD compliance and torque driver equipment for proper calibration.
  • Worked in an ESD safe environment, following strict ESD and testing procedures.
  • Adhere to established ESD guidelines, repair procedures, and associated safety standards.
  • Worked in a GMP /ESD environment closely with engineers to perform device evaluations.
  • Implemented and provided facility wide training for the production floor ESD system.
  • Collected ESD data on Transmission Line Pulse (TLP) test system.
  • Utilized ESD wrist and/or ankle straps to protect equipment against ESD damage.
  • Tested high power optical lasers in clean room and under ESD conditions.
  • Executed ESD compliant handling and electrical testing on various linear detector arrays.
  • Performed lab space planning, utilization and expansion (electrical/ESD included).
  • Participated in ESD, Lean Manufacturing and Just In Time processes.
  • Perform tasks under general supervision and Responsibilities for 5S / ESD.
  • Experienced with solder wave production fundamentals, ESD and hand soldering.
  • Calibrated Pulse generators, test equipment, and ESD stations.
  • Monitor all factor personnel for compliance to ESD procedures.
  • Performed daily ESD testing before use of products.
  • Maintain good 5S practice and follow ESD procedure.

Show More

30. ICT

low Demand
Here's how ICT is used in Test Technician jobs:
  • Performed production testing operations in strict compliance with test, operating procedures, and ensured unit functions worked according to specifications.
  • Provisioned ADSL circuits, resolving assignment conflicts between offices and ensuring installation completion by scheduled date.
  • Supervised Paint Department operations including painting filters to adhere to strict customer and military specifications.
  • Operate in a restricted/closed area while ensuring security of classified and proprietary information.
  • Performed preventive, predictive and reliability centered maintenance using equipment specs.
  • Performed mechanical testing of friction plate materials for automotive transmissions.
  • Followed strict guidelines as per Applied Materials documentation.
  • Required strict compliance with EPA and industry standards for handling samples, followed detailed testing procedures and adherence to regulation policies.
  • Assessed the condition of the drives and communicated to the district offices the condition of drives and repair costs if applicable.
  • Utilize ultrasonic equipment to detect and predict whether a crack of a given size will fail under a particular load.
  • Collect and test specimens for urinalysis for Drug Court and Pretrial for court system while keeping strict confidentiality.
  • Resolved conflicts and service issues through third party service providers when direct contact with end user was prohibited.
  • Followed strict company policy and procedures using NEBB as guideline for test and balance on HVAC systems/components.
  • Collaborate with Manager and peers regarding various defects to provide an overall picture of progress in development.
  • Visit the site, Take samples, Take Pictures, Write up concise and accurate reports.
  • Maintain HP 3070 ICT machine including software maintenance and programming changes for testing various circuit boards.
  • Experience with various fixtures and their programs related to ICT and FVT according to their models.
  • Adhere strictly to chain of custody procedures in handling collections, samples, and information.
  • Departed this position with two weeks notice as there were conflicts with my school attendance.
  • Test support for test department with testing issues also software debugging for ICT test fixtures.

Show More

31. AC

low Demand
Here's how AC is used in Test Technician jobs:
  • Worked closely with engineers to verify accurate procedures were implemented and ensured the highest quality was consistently achieved.
  • Applied knowledge of computing systems and software structures in order to facilitate networking/interfacing with other test equipment.
  • Prepared formulas for manufacturing department, and validated manufactured products prior to shipping to the customer.
  • Provide support to the manufacturing department with test fixture repairs and assist electronics assemblers when necessary.
  • Performed testing of therapeutic diagnostic equipment in the manufacturing environment prior to assembly and/or shipment.
  • Recommended and prepared courses of action to remedy any noncompliance with engineering specifications and regulations.
  • Complete all necessary paperwork and documentation accurately as mandated by the relevant regulatory bodies.
  • Participated in construction and demolition assignments and developed a working knowledge of best practices.
  • Performed acceptance functional tests on highly complex electrical and mechanical assemblies prior to shipment.
  • Provided technical assistance and/or perform installations of complex facilities as required by the customer.
  • Check, verify and document according to company guidelines and product specifications.
  • Performed routine equipment maintenance and calibration according to established schedules and procedures.
  • Preformed proper record keeping and notes documenting all daily activities and specifications.
  • Ensured TSA Systems Integration Facility support equipment was calibrated and operational.
  • Rework nonconforming product in lab and issue correction formula to manufacturing.
  • Perform assembly testing and repair customer requirements to meet customer satisfactions.
  • Perform new equipment validation and testing on X-Ray Tube manufacturing equipment.
  • Diagnose and recommend repair actions for manufacturing personnel to perform.
  • Provide guidance and training to manufacturing personnel on testing procedures.
  • Prepared well placement spreadsheet analysis to determine system placement.

Show More

32. RMA

low Demand
Here's how RMA is used in Test Technician jobs:
  • Identified information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events.
  • Prepared and presented comprehensive factory conformance / reliability test reports with a strong focus on ensuring quality excellence.
  • Performed acoustic and thermal testing in research and development setting on Workstation computers used for product development.
  • Orchestrated successful issue resolution and performance improvements in a wide variety of computer networks and systems.
  • Provided analysis and performance diagnostics on circuits designed as end-to-end or terminating within Central Office equipment.
  • Prioritized and assigned daily tasks, evaluated performance and recommended staff proficiency and conduct reports.
  • Verified part dimensions or clearances to ensure conformance to specifications, using precision measuring instruments.
  • Studied effects of imbalanced cell capacity, self-discharge rate and internal resistance on battery pack performance
  • Performed investigation of customer complaints involving therapeutic diagnostic equipment performance on five product lines.
  • Schedule preventive and planned maintenance including lubrication, thermal imaging, and vibration analysis.
  • Monitor pressure and temperature instrumentation to ensure they are working within performance design parameters.
  • Confirmed safety and performance of manufactured product while supporting Research and Development department.
  • Document and disposition system failures for repair and supply detailed information within e-factory.
  • Perform tests to determine capabilities of vehicles/systems and conformance to specifications and/or regulations.
  • Completed environment testing for diverse company products for performance in all weather conditions.
  • Characterized spectral features of optical filters by ensuring conformance to wavelength specification.
  • Document testing results and other pertinent information to be collaborated with colleagues.
  • Provided reliable and trustworthy performance data on company vs competitor products.
  • Verify that all required information is readily available and display correctly.
  • Developed documentation providing information and features of consumer production including proof-reading.

Show More

33. PLC

low Demand
Here's how PLC is used in Test Technician jobs:
  • Use PLC, schematics, ladder diagrams as well as blueprint to troubleshoot during the testing of our structures.
  • Verify the operation of PLC programs, troubleshoot PLC programs, program various meters, HMI displays.
  • Configure and test PLC s Programmable Logic Controller and power management networks.
  • Verified PLC ladder logic operation (in conjunction with) associated systems.
  • Utilized Allen Bradley and Siemens PLC controllers for automated testing of machines.
  • Used different PLC software for testing and diagnostic of modules and systems.
  • Modify and test PLC programming (Allan Bradley and MIT).
  • Service robotics, PLC, mechanical and electronic systems.
  • Analyzed, diagnose troubleshoot PLC and ground fault schemes.
  • Build PLC programs to simulate missing sections of line-up.
  • Install programs into PLC, test and debug.
  • Handled troubleshooting and diagnostics procedures to test PLC.
  • Program, configure, and test PLC modules.
  • Limited experience with Direct logic PLC's.
  • Programmed, troubleshot, and replaced PLC.
  • Programmed and tested PLC control systems.
  • Load and tested PLC programs.
  • Calibrate the air and fuel ratio, and other controls such as; PID, PLC and variable speed drive.
  • Help produce PLC, PLS, TOUCH PANELS, I/O MODULES
  • Contracted through Kelly services with Weatherford testing and programming various oil field pump controllers, PLC's, computer cards Etc.

Show More

34. System Level

low Demand
Here's how System Level is used in Test Technician jobs:
  • Tested and performed system level troubleshooting of missile guidance systems, possessed secret security clearance for work on confidential projects
  • Calibrated and troubleshot to the subsystem level, performed complex electronic and mechanical precision alignment.
  • Performed system level test including power on operations and lower level testing meeting specifications.
  • Performed component and system level debugging/troubleshooting on electronics.
  • Worked with complex system level interconnection drawings.
  • Performed system level test in manufacturing.
  • Troubleshot/debugged at multiple system levels.
  • Assembled laboratory test system building instruments, test equipment, fiber link boxes into racks for system level testing.
  • Evaluate test results, debug software and system level problems and interface with design engineers for problem resolution.
  • Worked as transmitter and System Level alignment and test technician of ASR-8 and GPN-24 Airport Surveillance Radars.
  • Analyze and interpret manual and automated test documents and software to perform assembly and system level testing.
  • Interfaced with Quality and Test Engineering to report and correct problems at the component and system level.
  • Build, test, and debug to the system level EMC data storage products VMAX3 and XtremeIO.
  • Performed a variety of component and system level tests in support of product development and validation.
  • Performed board level test and troubleshooting low power radio amplifiers and system level testing as well.
  • Define Implement, NPI, Prototype, and FA, Analyze end to end System Level.
  • Performed system level test on radiation therapy machines in accordance with company's standard test procedure.
  • Conducted system level testing and diagnosis on all ICG products including telephony and computer based platforms.
  • Performed Test and troubleshoot mixers, amplifiers, equalizers and filter from component to system level.
  • Reported to Engineering with responsibility for thermal testing of system level mass storage machines.

Show More

35. Electrical Systems

low Demand
Here's how Electrical Systems is used in Test Technician jobs:
  • Integrate updated electrical equipment to existing electrical systems and remove old or obsolete circuits and components.
  • Effected repairs to electrical systems to ensure equipment met specifications.
  • Install and perform power monitoring data for client electrical systems
  • Demonstrate excellent knowledge of aircraft electrical systems.
  • Service facility pumps and electrical systems.
  • Set up all tests and build up all electrical systems pertaining to the test.
  • Test Electrical Systems such as Fire Systems, Emergency System and Control Systems.
  • Trouble shoots electrical systems, adjust refrigeration systems and inspect for quality issues.
  • Update and modify existing electrical systems as required by the program.
  • Test and troubleshooting all electrical systems on the KC-46A and 767.
  • Test all mechanical and electrical systems on aircraft.
  • Installed electrical systems and avionics on Boeing 777.
  • Tested trains electronics functionality which included the radios, central diagnostics systems, pneumatics, and electrical systems.
  • Gained experience troubleshooting root cause of electrical systems failure in order to create lasting solutions.

Show More

36. Test Stations

low Demand
Here's how Test Stations is used in Test Technician jobs:
  • Build, test and evaluate test fixtures/test stations utilizing documentation, schematics and electrical/mechanical diagrams.
  • Evaluate, operate, calibrate and maintain electronic test fixtures/test stations ensuring compliance with specifications.
  • Designed and constructed computer automated test stations for a variety of government contracts.
  • Operated automated test stations, responsible for tuning and troubleshooting cable up-converters.
  • Engineered and constructed microchip validation test stations using specialized electronic equipment.
  • Conducted training for peers on operational responsibilities for test stations.
  • Perform assembly and post-validation/testing of functional test stations.
  • Configured Test stations for power measurements.
  • Supported automated troubleshooting test stations.
  • Assist Engineering with new product development and set up new test stations using schematics and blue prints for production.
  • Implemented and debugged Enterprise Class Hewlett Packard Printers, test software, and test stations using MS XP.
  • Assist with layout/design of new TIC ASD/UPS test stations and equipment for the Manufacturing and Test/QC Departments.
  • Hired as an Electronic Technician to run automated test stations, tune and troubleshoot cable up-converters.
  • Fabricated cables and cable harness assemblies and populated printed circuit boards for building test stations.
  • Performed maintenance and upgrades on test stations * Worked with Fiber-optic cables and equipment.
  • Supported production for QLS automated test stations and computerized theta delta burn- in ovens.
  • Collaborate with test engineers to identify anomalies in test stations and instrument data.
  • Maintained computer test stations and wrote operation instructions for test equipment.
  • Performed setup test stations, equipment, and aligned optics base.
  • Work with IT to ensure test stations and software is current.

Show More

37. Customer Specifications

low Demand
Here's how Customer Specifications is used in Test Technician jobs:
  • Power Supplies tested, trouble shooting and calibrated -Reconfigured voltages based on customer specifications sand burn-in
  • Tested production printed circuit boards using computer database test fixtures to customer specifications.
  • Executed software downloads, memory upgrades and hardware assemblies according to customer specifications.
  • Perform environmental/climatic and dynamic testing in accordance to customer specifications and updated procedures.
  • Calibrate particle accelerator based X-ray equipment to customer specifications.
  • Tested components per customer specifications using customers testing equipment.
  • Conducted functional testing for performance adhering to customer specifications.
  • Operated vibration equipment to meet various customer specifications.
  • Debugged and inspected filters to meet customer specifications.
  • Ensured products meet industry and customer specifications.
  • Trained other techs to customer specifications.
  • Perform tests to customer specifications.
  • Performed Quality Acceptance tests on finished products and inspect as per customer specifications and procedures in compliance with ISO requirements.
  • Take over assembled line from Production, check it, test machine and then get it running to customer specifications.
  • Perform screening on commercial and military grade crystal oscillators to ensure each meets, or exceeds the customer specifications.
  • Test material per customer specifications using ASTM (American Standard Test Methods) performing over 20 test methods.
  • Worked with a team that assembled and tested solid rocket motors and their components to customer specifications.
  • Interpret drawings, schematics, and customer specifications and insure product compliance with these.
  • Tested multiple computer units, to verify units were built to customer Specifications.
  • Use various soldering equipment to perform value add work according to customer specifications.

Show More

38. Unix

low Demand
Here's how Unix is used in Test Technician jobs:
  • Performed calibration and certification on UNIX based automated test equipment.
  • Used C++ and UNIX software to test single unit and complex system of the NORTEL and PBX Network electronic circuit boards.
  • Resulted in a practical hands-on training environment supporting the UNIX Station Division of 300 employees and close to 500,000 customers worldwide.
  • Provided expertise on the UNIX operation system to address issues related to the DPS interface with other systems that utilize UNIX.
  • Supported EMC testing by providing UNIX shell scripts for automating setup and burn in and by operating complex computer systems.
  • Implemented a new data storage web based Odyssey System transitioning from a UNIX windows system which eliminated manual data conversion.
  • Used UNIX software to test and troubleshoot the Sun Computer systems from the whole unit down to the component level.
  • Performed testing and repairing of multiple low mid-range servers platforms both UNIX and NT products within a manufacturing environment.
  • Trained new Systems Testers on UNIX and DocuSP systems, to enable them to run integration and performance tests.
  • Serviced other responsibilities include supporting System Administrative Jobs for Linux, UNIX and NT Server and LAN Network Environment.
  • Worked with an Automated Test Stand using a UNIX workstation and programmed E-Proms to satisfy performance criteria.
  • Developed a testing step by step plan for servers and blades using UNIX and Linux methodologies.
  • Format and load UNIX operating system to working hard drives and label them as replacement stock.
  • Performed various tests and ran performance verification using Sun OX/2 UNIX-based systems with LTX Cadence R10.5.5.pl.
  • Worked in a subdivision building Unix based workstations, testing and repairing the hardware and software
  • Utilized UNIX-based terminals interfaced with testers to add various levels of voltage to test circuits.
  • Used UNIX commands to Add, modify and delete users from the test boxes.
  • Performed both manual and automated testing on Windows, Linux and UNIX based platforms.
  • Download True64 Unix, Windows NT, Linux and open VMS operating system.
  • Performed Debug Analysis on Cisco Software test programs using codes in Unix environment.

Show More

39. Signal Generators

low Demand
Here's how Signal Generators is used in Test Technician jobs:
  • Maintain RF test station equipment to include base station simulators, spectrum analyzers, signal generators and network analyzers.
  • Performed testing using network analyzers, spectrum analyzers, signal generators, noise figure meters and power meters.
  • Utilized spectrum and network analyzers, signal generators, and power meters to test and troubleshoot components.
  • Experience with scalar/network analyzers, signal generators, power meters, multimeters, spectrum analyzers, and PNA series network analyzers.
  • Test and troubleshoot components, Subassemblies and systems using test equipment including: Signal Generators, Spectrum Analyzers and Network Analyzers
  • Test equipment used included signal generators, spectrum analyzers, network analyzers, power meters, and digital multimeters.
  • Assist using test equipment, such as multi-meters, temperature and pressure calibrators, and signal generators.
  • Tested equipment, Using multi meter, capacitor tester, oscilloscope and signal generators.
  • Experience with multi-meters, o-scopes, power supplies and signal generators.

Show More

40. Electronic Test Equipment

low Demand
Here's how Electronic Test Equipment is used in Test Technician jobs:
  • Tested/assembled experimental, production, computer and telecommunications equipment in order to evaluate performance using various electronic test equipment.
  • Operated impedance meters and other specialized electronic test equipment.
  • Installed electronic test equipment in an industrial environment.
  • Operate and interpret basic electronic test equipment.
  • Maintained and calibrated electronic test equipment.
  • Use of CMM and Optical inspection equipment, use of a variety incoming mechanical and electronic test equipment and procedures.
  • Used electronic test equipment to locate and correct malfunctions in instrumentation, ignition and emission control systems.
  • Utilized electronic test equipment, such as, oscilloscopes, power meters, and strobe lights.
  • Maintained a high level of proficiency with optical and electronic test equipment.
  • Use of standard electronic test equipment to include environmental control chambers.
  • Use sophisticated electronic test equipment to perform test of cell antennas.
  • Skilled on multiple test stations and electronic test equipment.
  • Set up, calibrated and operated electronic test equipment.
  • Operated a wide range of electronic test equipment.
  • Network Analyzer, Standard Microwave and Electronic Test Equipment
  • Utilized schematics and electronic test equipment (including oscilloscopes and multi-meters) to troubleshoot faulty detectors.
  • Operate and prove proficiency with all types of GPETE (General Purpose Electronic Test Equipment) to include DVMs and Oscilloscopes.
  • Performed testing on defective equipment using various electronic test equipment such as oscilloscopes, digital multimeters, and cable testers.
  • Used electronic test equipments to align, adjust, calibrate, and performed preventive maintenance on equipment.
  • Skilled in the use of electronic test equipment, e.g., multi-meter and Oscilloscope.

Show More

41. Ethernet

low Demand
Here's how Ethernet is used in Test Technician jobs:
  • Used Ethernet analyzer to record wire map, single or dual channel connections, and their insertion and return loss.
  • Tested and insured devices can operationally connect to system via RS-232, Ethernet, Wi-Fi, Phone dial-up and GPRS.
  • Perform Bios flashing, firmware download, Optical Ethernet Programming, FPGA Programming, and USB Port Controller Programming.
  • Program options to test all traffic function of Ethernet control boards.
  • Worked with Frame Relay, ATM IMA and Metro Ethernet protocols.
  • Provision Ethernet circuits in the Ethernet Provisioning Center (ECSPC).
  • Performed 100BASE-T Ethernet IEEE 802.3 2008 Clause 4, 24 and 31 conformance testing.
  • Performed Fast Ethernet interoperability testing.
  • Automated the process of getting the manufacturer information from the ethernet switches in the rack.
  • Create cluster using linux for stress analysis of hardware, software and installed software, setup Ethernet and infiniband speed.
  • Install, test, and troubleshoot 3 phase, Cat5 ethernet, and control wiring.
  • Perform pre-bench and final bench manufacturing inspectons for IR, continuity and Ethernet connections.

Show More

42. Quality Standards

low Demand
Here's how Quality Standards is used in Test Technician jobs:
  • Streamlined operations by lowering costs, increasing efficiency, and maintaining high quality standards while serving as quality assurance coordinator.
  • Ensured documentation and practices meet quality standards, applicable regulatory compliance and company guidelines/policy using sound software validation practices.
  • Completed solder training certification classes to fulfill required Federal Aviation Administration and United States military quality standards.
  • Provided customer support on product functionality and quality standards elevating customer experience.
  • Implemented corrective actions to ensure quality standards during production.
  • Critiqued vacuum coated insulated glass devices certifying quality standards.
  • Performed mechanical/cosmetic repairs to strict quality standards.
  • Perform test inspections on check scanners to ensure that quality standards and process controls are being met throughout the manufacturing process.
  • Developed and maintain Process Control Failure Detection Program for use by Districts to help industry maintain Department's quality standards.
  • Enforce the company's Quality Standards and Procedures for Computerized Systems, as defined in their governing Quality Management System.
  • Headed up new product line for Honeywell, and consistently meet or exceeded customer desired output and quality standards.
  • Develop Quality Control infrastructure; including methods of testing, quality standards, reporting processes, etc.
  • Assist with defining and carrying out appropriate tests to confirm a product's compliance with quality standards.
  • Prepared samples for testing using hand and power tools, soldering irons and followed Automotive Quality standards.
  • Performed testing and troubleshooting of electronic products, components, and systems to ensure quality standards.
  • Used Johnson & Johnson Good Manufacturing Practice(GMP) to assure FDA and quality standards met
  • Recorded and reported test data to the quality standards of the Acceptance Test Procedure.
  • Perform electrical testing on units to make sure grounds and wiring meet quality standards.
  • Conduct test and troubleshoot electronic product components to ensure production quality standards are met.
  • Performed 100% inspection on all boards to ensure quality standards were met.

Show More

43. Computer System

low Demand
Here's how Computer System is used in Test Technician jobs:
  • Analyzed requirements and recommended selection of computer system for data acquisition and control of X-ray generator and detector gas pressure system.
  • Performed alignments on specialized vibration test equipment and computer systems in order to insure accurate data analysis.
  • Enhanced system integration testing of complete personal computer systems using an internally developed keyboard/mouse recording system.
  • Performed system integration testing to establish WHQL certification for Intel-based personal computer systems.
  • Developed sequence operations and transferred written data to computer system for testing.
  • Utilized highly confidential and secure criminal information via specialized computer system.
  • Operated Hewlett-Packard computer systems in testing of modules.
  • Document all work performed in manufacturing computer system.
  • Operated input/output production using computer system.
  • Audited and tested finished computer systems.
  • Experienced in computer system installation, hardware and software debug, calibration, HP Basic Programming, and hardware packaging design.
  • Modify, test, troubleshoot, and repair IBM, Intel, and clone based computer systems and peripherals.
  • Worked as a Functional Test Technician using a Hughes Computer System to test various aircraft harness and wiring boards.
  • Test, troubleshoot, and repair systems and circuit boards for IBM 360/370 plug compatible main frame computer systems.
  • Keep computer systems and networks running efficiently on lines that run 24 hours a day.
  • Debugged defective lap top, desktop and server computer systems down to the component level.
  • Operate, maintained, and repaired mini, personal, and server computer systems.
  • Gained experience in testing, troubleshooting and repair AST Lap top & Computer systems.
  • Perform tests using various computer systems, oscilloscopes, power supplies and meters.
  • Enter all required traveler data into QMS (Order Management Computer System).

Show More

44. GPS

low Demand
Here's how GPS is used in Test Technician jobs:
  • Evaluated and tested various factory-installed GPS systems for multiple models of automobiles.
  • Perform field collection of GIS map attributes for GPS navigation systems in Toyota & Lexus cars driving across North America.
  • Test, troubleshoot, and repair GPS receivers using automated test equipment, spectrum analyzers, and RF generators.
  • Sampled BER and SSI around the Washington Metropolitan Area using Motorola software, Voyager software, and GPS systems.
  • Set up test instrumentation and data acquisition programs for recording of video, CAN, and differential GPS data.
  • Process the GPS test by using the GSR Tester, Net Com Manager, and Line Viewer Software.
  • Traveled and tested GPS navigation systems in other areas as far as going out of town and state.
  • Updated phone firmware, setting PRI/PRL, GPS, PMD configuration and parameter using PHOENIX program file.
  • Check and verify that all GPS and satellite tracking systems functioned along with black box recording.
  • Test all initialized boards for GPS & Radio Channels inside the GPS Chamber at GPS station.
  • Test cell phones for various carriers for call performance, voice quality, and assisted GPS.
  • Collected and verified road access/route restrictions and information for use in the development of GPS.
  • Monitor driving behavior through GPS data, and provide summaries to the executive team.
  • Perform test that would measure the level of GPS signal on the unit.
  • Selected for launch support team for first GPSIIR satellite launch at Cape Canaveral.
  • Tested and repaired customer returned goods for GPS product lines (PLUGR/DAGR).
  • Perform tuning and testing of GPS by following the required specification.
  • Use QXDM and Snapper for SUPL testing to analyze AGPS quality.
  • Test new GPS cards, lightning protectors and power alarms.
  • Calibrate and maintain equipment used to test GPS products.

Show More

45. Engineering Department

low Demand
Here's how Engineering Department is used in Test Technician jobs:
  • Collaborated with Engineering Department personnel as necessary to facilitate root-cause analyses and investigations of individual components with out-of-specification test results.
  • Inspected and tested compressor components following written procedures and verbal guidance from the engineering department.
  • Provide feedback to engineering department on ways to improve procedural steps and process implementation.
  • Researched 8 external vendors to identify and order best-cost parts alternatives for engineering department.
  • Assisted engineering department in testing practices of re-designed and new prototype equipment.
  • Report discrepancies to engineering department to take corrective action before shipment.
  • Conducted qualification and vibration test surveys for engineering department.
  • Work as principal hardware/software resource for Engineering department.
  • Worked with Engineering Department during First Article testing/evaluations.
  • Work closely with engineering department.
  • Designed, verified and tested subscriber product phones; designed various test fixtures in support of engineering department and subscriber products.
  • Worked with customers, QA, and engineering departments to develop test plans that best suited the customer's needs.
  • Work with engineering department to aid in simplification of the company's product with improved hydraulic plumbing and mechanical design.
  • Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
  • Collected test and troubleshooting data to assist all involved engineering departments in the development process of the amplifier.
  • Conferred with technicians and submitted reports of test results to engineering department and recommended design and material changes.
  • Worked with engineering department to do destructive and non destructive testing on tires to meet DOT standards.
  • Assisted electrical and mechanical engineering departments with R&D setup and execution of experiments.
  • Send off Core Samples to appropriate Engineering Department -Inspect Stay In Place forms on bridges.
  • Create and maintain procedures, assist in various stockroom transactions, inspection and engineering departments.

Show More

46. Osha

low Demand
Here's how Osha is used in Test Technician jobs:
  • Completed OSHA safety training, ASME/OSHA Rigger and Signal Person and am certified at various power plants for site specific safety requirements
  • Provide annual certification for aerial equipment that meet passing criteria under OSHA, ANSI, DOT and NFPA requirements.
  • Assist the training staff with mass OSHA and/or Eastman training classes at various dates throughout the year.
  • Take an active role in maintaining a safe working environment and following OSHA guidelines and practices.
  • Trained in soldering; safety training in forklift and bucket truck operation by OSHA.
  • Conducted ALL OSHA and BSI training for manufacturing area at the Houston Campus.
  • Understand and comply with OSHA's LOTO policy and insure zero energy potential.
  • Change procedures due to different OSHA safety codes and QSTI testing protocols.
  • Practiced OSHA compliance and performed lockout tag-out procedures on production equipment.
  • Comply with OSHA guidelines to safely work around open storage tanks.
  • Experienced using OSHA approved LOTO methods for myself and others.
  • Trained to work in Confined Space, per OSHA standards.
  • Maintained MSDS records and trained OSHA's safety rules.
  • Trained and licensed OSHA electric fork lift driver.
  • Performed software testing for Intel ProShare product line.
  • Served as Human Resources Committee Chairman/OSHA Safety Compliance.
  • Served as the OSHA safety officer.
  • Earned OSHA 30 Hour Safety Certificate.
  • Read and understand OSHA, NFPA, and ANSI codes.
  • Completed online OSHA training certifications such as Hazmat, environmental safety, Lock out Tag out, Confined spaces etc.

Show More

47. Hi-Pot

low Demand
Here's how Hi-Pot is used in Test Technician jobs:
  • Test for power fail, over and under voltage protection, over current protection, hi-pot, and leakage current.
  • Performed functional test, system test, burn-in, temperature cycling, hi-pot and ICT test.
  • Test capsule for the pump by using Digital-Multimeter, Hi-Pot power supply and load.
  • Test Hi-Pot test and make sure they pass before ship out the product.
  • Perform electrical test on high voltage using system Hi-Pot and Leakage current.
  • Operated functional test equipment including HI-POT to support Sun Micro-system program.
  • Tested calibrated Hi-Pot and generated test reports for production lot.
  • Performed Hi-pot testing on all required builds.
  • Used Hi-Pot tester and impedance meter.
  • Performed set ups for AC/DC, Hi-Pot test, and Radio Frequency (RF) tests.
  • Performed Wire/hi-pot/helium-leak and electrical testing on the Ultra Inverters.
  • Test train subsystems for electrical integrity and continuity using DVM, Hi-pot, Megger and various power supplies.
  • Perform DC Megger and AC Hi-Pot testing of entire Bus system to satisfy Industry Standards for compliance.
  • Used Hi-pot, hypatia, and voltage leakage tester.
  • Performed Hi-pot and Megger tests on trucks.
  • Performed acceptance testing of diesel and natural gas ITG's, switchgear, cogen units and other devices including Hi-Pot testing.
  • Worked with various test programs and equipment using CMstar, Library Tapes and Tools, Hi-Pot, Psuite, XTEE.
  • Make the Dilectric tests(Megger & Hi-Pot test).
  • Used technical procedures to perform Continuity, Megger, and Hi-Pot testing on railcars..

Show More

48. QC

low Demand
Here's how QC is used in Test Technician jobs:
  • Perform final QC check for units prior to test verifying all paperwork is complete and correct.
  • Perform final QC inspections and sent units to Finished Goods for shipment back to customers.
  • Worked closely with the QC of the contractor in the asphalt plant inspection field.
  • Supported QC Product Control Engineer in order to solve, analyze and report failures.
  • Utilize test equipment for final QC before releasing computers for final return staging.
  • Support the QC function with the inspection of various major components and/or sub-assemblies
  • Run QC Testing and diagnostics software on Servers.
  • Check customers' feedback using GCRM and QCR.
  • Perform reagent and equipment QC checks.
  • Clean and prep for QC inspection.
  • Performed scheduled maintenance and QC.
  • Build, test and final QC of the UP2000 screen printing machine.
  • Tested UPW and HUPW systems pressure and analytical functions ensuring all QC complied with all regulatory standards.
  • Conducted radiation and functional tests of QC/GlobalStar phone & ODUs (Out-Door Units).
  • Worked along side QC, QE and Manufacturing personnel to insure product quality.

Show More

49. DMM

low Demand
Here's how DMM is used in Test Technician jobs:
  • Maintained data records, basic electronic test equipment such as Power Supplies, Oscilloscopes, DMM and other hand tools.
  • Set up test stations with necessary tools including PC's, O-scopes, DMM's, function generators, freq.
  • Use standard test equipment to test electronics * Oscilloscopes, DMM, Power supply (DC and AC).
  • Utilized testing equipment including Oscilloscope, Frequency Generator, Pulse Generator, DMM, AC and DC power supplies.
  • Use of oscilloscope to find elevation in frequency, and DMM to track down single operational component.
  • Used oscilloscopes and DMM meters to measurement wave ranges of products to solve the problems.
  • Use of test equipment including; ICT, Oscilloscope, DMM and PC based applications.
  • Measured leakage, impedance, voltage and continuity with DMM's and oscilloscopes.
  • Used Oscilloscope, DMM, Spectrum Analyzer, Frequency counter to troubleshoot modems.
  • Performed with all test equipment such as ATE, DMM and Fixture.
  • Required familiarity with DMM, Scope, Special Tools and Schematics.
  • Debugged failures using schematics, blueprints DMM, scopes.
  • Test Equipment included Oscilloscope, PC and DMM.
  • Utilize oscilloscopes, DMM, and Function Generators.
  • Used oscilloscope, DMM, schematics, drawings, ECO's, BOMs, and IBM/PC compatible computer and diagnostic software.
  • Diagnose PCB failure to components level by using Tektronix Oscilloscope, DMM and function generators equipment's.
  • Used Femto 2000, Spectrum and Logic analyzer, DMM and oscilloscopes to validate MEMS devices.
  • Utilized variety of equipment: DMM multimeter, oscilloscope, power supply, TCA run-in, VAST-5
  • Used oscilloscope, logic analyzer, DMM and test-fixture for testing.
  • Use of oscilloscopes, DMMs, and spectrum analyzers.

Show More

50. Test Stands

low Demand
Here's how Test Stands is used in Test Technician jobs:
  • Designed and constructed electrical, pneumatic, and hydraulic test stand panel layouts from schematic drawings for ABS Test stands.
  • Calibrated and tested product using various test stands, gauges, fixtures, and tooling to assigned ATP.
  • Run tests on multiple test stands at the same time and keep accurate logs on each.
  • Set up test stands to run validation tests on hydraulic power steering pumps and hoses.
  • Coordinated test timing on valve train test stands and placed orders for test stand consumables.
  • Assembled and operated test stands for aerospace actuator Development, Qualification, and Acceptance testing.
  • Assisted test engineers with the assembly of test stands to evaluate transmission and axle assemblies.
  • Set up, monitor, and complete design changes on hydraulic test stands.
  • Repaired and serviced a total of 17 test stands for the compressor department.
  • Maintain hydraulic and electrical systems on several high pressure test stands.
  • Set up, fabricate, and monitor test stands and fixtures.
  • Assemble parts for testing and installation of parts into test stands.
  • Change out starters on live test stands at scheduled intervals.
  • Set up and tear down of Prop department test stands.
  • Deigned detailed layouts of test stands and specific test operations.
  • Installed, wired and charged compressors on their test stands.
  • Operated fuel injector test stands, primary flow stands.
  • Run and operate hydraulic pumps and test stands.
  • Maintain cooling system plumbing for test stands.
  • Upgraded test stands to meet customer requirements.

Show More

20 Most Common Skill for a Test Technician

Test Procedures23.3%
Test Cases13.4%
Circuit Boards9.8%
Component Level9.1%
Oscilloscopes6.7%
Set-Up4.7%
PCB4.5%
Trouble Shooting4%

Typical Skill-Sets Required For A Test Technician

RankSkillPercentage of ResumesPercentage
1
1
Test Procedures
Test Procedures
17.4%
17.4%
2
2
Test Cases
Test Cases
10%
10%
3
3
Circuit Boards
Circuit Boards
7.3%
7.3%
4
4
Component Level
Component Level
6.7%
6.7%
5
5
Oscilloscopes
Oscilloscopes
5%
5%
6
6
Set-Up
Set-Up
3.5%
3.5%
7
7
PCB
PCB
3.4%
3.4%
8
8
Trouble Shooting
Trouble Shooting
3%
3%
9
9
PCS
PCS
2.8%
2.8%
10
10
ISO
ISO
1.7%
1.7%
11
11
Spectrum Analyzer
Spectrum Analyzer
1.5%
1.5%
12
12
Customer Service
Customer Service
1.5%
1.5%
13
13
Failure Analysis
Failure Analysis
1.5%
1.5%
14
14
Hand Tools
Hand Tools
1.4%
1.4%
15
15
Final Test
Final Test
1.4%
1.4%
16
16
Preventative Maintenance
Preventative Maintenance
1.4%
1.4%
17
17
Technical Support
Technical Support
1.3%
1.3%
18
18
Data Acquisition
Data Acquisition
1.3%
1.3%
19
19
Linux
Linux
1.2%
1.2%
20
20
Surface Mount
Surface Mount
1.2%
1.2%
21
21
High Voltage
High Voltage
1.2%
1.2%
22
22
R
R
1.2%
1.2%
23
23
Data Entry
Data Entry
1.2%
1.2%
24
24
SMT
SMT
1.2%
1.2%
25
25
Data Collection
Data Collection
1.2%
1.2%
26
26
Hvac
Hvac
1.1%
1.1%
27
27
Test Systems
Test Systems
1%
1%
28
28
QA
QA
1%
1%
29
29
ESD
ESD
1%
1%
30
30
ICT
ICT
1%
1%
31
31
AC
AC
0.9%
0.9%
32
32
RMA
RMA
0.9%
0.9%
33
33
PLC
PLC
0.9%
0.9%
34
34
System Level
System Level
0.9%
0.9%
35
35
Electrical Systems
Electrical Systems
0.9%
0.9%
36
36
Test Stations
Test Stations
0.8%
0.8%
37
37
Customer Specifications
Customer Specifications
0.8%
0.8%
38
38
Unix
Unix
0.8%
0.8%
39
39
Signal Generators
Signal Generators
0.7%
0.7%
40
40
Electronic Test Equipment
Electronic Test Equipment
0.7%
0.7%
41
41
Ethernet
Ethernet
0.7%
0.7%
42
42
Quality Standards
Quality Standards
0.7%
0.7%
43
43
Computer System
Computer System
0.6%
0.6%
44
44
GPS
GPS
0.6%
0.6%
45
45
Engineering Department
Engineering Department
0.6%
0.6%
46
46
Osha
Osha
0.6%
0.6%
47
47
Hi-Pot
Hi-Pot
0.6%
0.6%
48
48
QC
QC
0.6%
0.6%
49
49
DMM
DMM
0.6%
0.6%
50
50
Test Stands
Test Stands
0.6%
0.6%

16,455 Test Technician Jobs

Where do you want to work?