Painter jobs at Textron - 104 jobs

The Painter is responsible for operating painting equipment to paint trailers and parts which meet quality specifications in a timely fashion. 1. Prepares spray guns and equipment. 2. Moves trailers in and out of spray booth. 3. Removes tires as needed and covers/tapes off parts that are not to be painted. 4. Spray paints trailers on all surfaces with appropriate colors. 5. Hangs and sprays parts as needed. 6. Blasting duties as needed. 7. Striping/touch up duties as needed. 8. May be responsible for storing, moving, and/or handling hazardous or non-hazardous waste/materials. 9. Meets production deadlines and notifies Supervisor of any production delays. 10.Adheres to quality standards at all times. 11.Adheres to safety standards at all times. 12.Maintains work area in a clean, safe, orderly fashion. Essential Universal Job Duties: 13. Improves self in any way possible to enhance job performance. 14. Promotes Felling Trailers, Inc., its mission, values, programs and achievements to the public and other employees. 13. Identifies organizational problems and opportunities for improvement and brings solutions and suggestions to managements attention. 14. Functions as a team member by assisting, supporting and encouraging other employees in any way possible Non-Essential Job Duties: 15. Performs related work as required, willingly and eagerly. Qualifications Job Specifications: Education: High School Related Experience: None Required Supervision Given: None Supervision Received: Paint Supervisor Physical Demands: Please contact Felling Trailers, Inc. HR Department for the physical demands that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EEOE Felling Trailers, Inc. is committed to the principles of Equal Employment Opportunity. We believe our continued success depends on the full and effective utilization of qualified persons regardless of race, color, creed, religion, national origin, sex, age, disability, marital status, sexual preference, status with regard to public assistance, or other classification protected by law. All team member recruiting, hiring, training, compensation, benefits, transfers, promotions, social or recreational programs, and on-the-job treatment is to be administered in accordance with this commitment.

Summit Truck Bodies, LLC, a quality manufacturer of custom designed service and lube truck bodies, is expanding its workforce due to increasing sales. If you are a motivated team player who is committed to producing a high quality product on time and safely, we want you on our team. Summit Truck Bodies is looking for a Vortex and Undercoating Painter responsible for the proper application of Vortex and undercoating to the body and parts by operating spray equipment. WE OFFER A FULL BENEFITS PACKAGE FOR ELIGIBLE EMPLOYEES INCLUDING: * Medical, Dental, and Vision Insurance * Life (Voluntary and Employer Paid) and Disability Insurance * 401(K) with company match beginning with your first contribution. * HSA and/or FSA * Paid Time Off and Company Paid Holidays * Employee Car Discount Program. ESSENTIAL DUTIES & RESPONSIBILITIES: * Prepare work to be accomplished by studying work order, bill of materials and blueprints. * Prepare bodies for Vortex and undercoating application by masking, taping and prepping the bodies. * Operate spray equipment to linex and undercoat the body. * Dispose of hazardous waste from the Vortex and undercoating process in accordance with federal and state laws. * Adjust paint spraying equipment to get proper flow and coating thickness. * Responsible for inspecting work after Vortex/undercoat is applied. * Observe health and safety by wearing a respirator, paint suits and all other PPE. * Document actions by completing production and quality forms. * Maintain a clean and safe work area. * Participate in all continuous improvement programs by offering suggestions and exhibiting initiative in areas within direct control. * Other duties as assigned by the manager. Requirements WORK ENVIRONMENT & PHYSICAL ABILITIES: * Frequent mobility and / or sitting, standing, bending or stooping for prolonged / extended periods. Requires lifting up to 50 pounds frequently. * Occasionally lifts and carries items weighing up to 75 pounds. * Requires working in areas which are not ventilated or air-conditioned. * Requires eye-hand coordination sufficient to operate machinery. * Requires exposure to chemicals and solvents. * Requires full range of body motion including handling and lifting, manual and finger dexterity and eye-hand coordination. * Requires working under stressful conditions or working irregular hours. * Requires eyesight correctable to 20/20 to read numbers, reports and computer terminals. * Requires hearing within normal range. REQUIRED EDUCATION, EXPERIENCE, KNOWLEDGE & SKILLS: * High School diploma or equivalent. * Valid driver's license with good standing MVR. * Some technical training helpful. * Must have experience in automotive paint and prep work. * Must have experience using pressure feed spray equipment. * Attention to detail is a must * Able to use hand and power tools and equipment. * Ability to operate a forklift if required. * Ability to work with multiple priorities and constant interruptions. * Must have basic reading, writing and arithmetic skills. * Ability to work in a fast-paced environment with constant demands and shifting of priorities. * Ability to work with all levels of employees. * Ability to be responsive and highly efficient with relaying information. * Ability to successfully complete respirator medical evaluation. * Ability to successfully pass a General Abilities Assessment and Post-offer background check, physical and drug screen. #STE

🚀 Build Your Future with SMF! Why Choose SMF? At SMF, we don't just offer jobs-we build careers. As part of Etnyre International, we have a 50-year legacy in high-quality metal fabrication, serving industries like construction, power generation, agriculture, and mining. We take pride in being a Tier One supplier to Fortune 500 OEMs, which means high standards, excellent quality, and rewarding work. Our team of skilled professionals and state-of-the-art manufacturing facilities (spanning 200,000+ square feet) make SMF one of the top ½ percent of machine shops nationwide. In 2020, SMF joined Etnyre International, fueling even more growth and opportunity-and we want YOU to be part of it! 💥 Now Hiring: 2nd Shift Painter (Mon-Fri, 2:30p-11:00p) 📍 Location: Anderson, South Carolina 💰 Pay Range: $18.25 - $27.96/hour (based on experience) We are currently seeking an experienced and motivated Painter to join our 1st shift team. Key Responsibilities: ✅ Clean metal parts using hand and power tools to remove slag or debris ✅ Wash parts in a booth or with chemical solvents to prepare for coating ✅ Mask, sand, and hang parts in preparation for powder application ✅ Apply powder coating in paint booth, ensuring consistent quality ✅ Operate and maintain cure ovens as per specifications ✅ Inspect finished products to ensure they meet quality standards ✅ Accurately record labor and production data ✅ Maintain a clean and organized work area ✅ Follow all safety procedures and wear proper PPE ✅ Perform additional duties as assigned Qualifications Qualifications: 📌 High School Diploma or GED required 📌 Minimum 2 years of experience in steel manufacturing or industrial painting 📌 Completion of safety, quality, and production training Physical Requirements: 💪 Frequent bending, twisting, and lifting up to 50 lbs 💪 Heavier loads require use of overhead or jib crane 💪 Must be able to wear a respirator when required 💎 What We Offer - Total Rewards Package: ✅ ANNUAL BONUS for ALL team members ✅ ANNUAL Wage Increases to reward your dedication ✅ Competitive Pay Based on Experience ✅ $2.50/hour Shift Premium for 2nd shift ✅ 11 Paid Holidays + 3 Additional Paid Holiday Break Days ✅ Generous Paid Time Off (Vacation & Flex Time) ✅ Excellent Benefits Package: LOW-COST Medical, Dental, and Vision Insurance Company-Paid Life Insurance & Disability Coverage 401(k) with Employer Match & Profit Sharing Accident, Hospital, & Critical Illness Coverage Options 🌟 Why Join SMF? 🔹 Work for a company that's in the top ½ percent of machine shops nationwide 🔹 Be part of a fast-growing organization with state-of-the-art manufacturing 🔹 Take pride in contributing to high-quality, Fortune 500 OEM projects If you're energetic, detail-oriented, and ready to grow, we want you on our team! 📢 Apply today and start your career with SMF!

**3rd Shift Sunday through Thursday 11:00pm to 7:00am** Performs paint application to structural parts, components and subsystems for aircraft applications using products and processes that are moderately complex in scope to apply various primer and topcoat paint systems to aircraft parts consistent with government, customer, and company standards. Essential Job Functions: Follows National Aerospace and Defense Contractors Accreditation Program (NADCAP) requirements. Selects, prepares, and mixes coatings per specifications. Prepares and masks parts with fixtures, rubber, and tape prior to coating. Sets up and operates various types of spray systems. HVLP spray primers and topcoats to Mil specs and thicknesses. Sets bake/cure oven controls for correct temperature and records time. Removes masking, cleans overspray. Inspects surfaces visually for defects and compliance prior to and after applying coating. Performs inspection, measuring, and testing on part surfaces of in-process and finished work utilizing precision measuring equipment. Cleans and maintains spray/coating equipment and fixtures. Disposes of trash, scrap, and hazardous waste in an appropriate manner. Removes grease, dirt, paint, or rust from surfaces using abrasives, solvents, and brushes or washing tanks to prepare to apply paint. Performs any pickup, rework, and incorporation of changes to the product as required. Moves product within the manufacturing work area of the shop, including across aisles, using assigned equipment and complete transactions necessary to move product to the next operation. Supports the continuous flow of products within the manufacturing process by training and assisting employees of the same or lower classification level. Inspects equipment, structures, or materials to identify the cause of errors or other problems or defects. Analyzes information and evaluates results to choose the best solution and solves problems as pertains to the paint process. Ensures daily logs are completed prior to paint operations. Additional Duties: Compliance with governing regulations including but not limited to BAC, OSHA, and customer specifications. Meet job functions as evident by skills matrix. Provide support for Lean manufacturing and continuous improvement initiatives, companywide. Other duties, reporting, special assignments, or projects as needed and assigned. Must remain current with, and complete all required training as assigned. Must adhere to Company Corporate EHS Policy and department, occupation, and task specific safety protocols, including but not limited to Personal Protective Equipment (PPE) requirements. This role requires the use of a properly fit tested respirator clear of impeding facial hair. Qualifications: 3+ years overall production experience in a manufacturing environment, preferably in a regulated industry (aerospace). Ability to work from prints, sketches, specifications, and written/verbal instruction. Can match or detect differences among colors, including shades of color and brightness. Ability to remain steady while moving an arm or while holding arm and hand in position. See details at close range. Make precise movements of the fingers to grasp, manipulate or assemble small objects. Ability to quickly move hand, hand with armor two hands to grasp, manipulate or assemble objects. Ability to meet deadlines and plan accordingly. Strong technical and mechanical ability. Good interpersonal skills. Team and individually goal oriented. Experience with Continuous Improvement. Must submit to and satisfactorily pass any pre-employment screening required for employment with the Company. Must take medical exams required by law, in conjunction with occupation specific activities, the physical work environment, and ongoing industrial hygiene sampling results. Depending on assignment, may be required to use stairs, remain upright and/or seated for prolonged timeframes, intermittently reposition the body per various tasks performed, and use various tools and work-related supplies. May be required to perform manual lifting activities, not to exceed a 40lb lift performed by one individual. Education: High School diploma or GED.

Performs paint application to structural parts, components and subsystems for aircraft applications using products and processes that are moderately complex in scope to apply various primer and topcoat paint systems to aircraft parts consistent with government, customer, and company standards. Essential Job Functions: Follows National Aerospace and Defense Contractors Accreditation Program (NADCAP) requirements. Selects, prepares, and mixes coatings per specifications. Prepares and masks parts with fixtures, rubber, and tape prior to coating. Sets up and operates various types of spray systems. HVLP spray primers and topcoats to Mil specs and thicknesses. Sets bake/cure oven controls for correct temperature and records time. Removes masking, cleans overspray. Inspects surfaces visually for defects and compliance prior to and after applying coating. Performs inspection, measuring, and testing on part surfaces of in-process and finished work utilizing precision measuring equipment. Cleans and maintains spray/coating equipment and fixtures. Disposes of trash, scrap, and hazardous waste in an appropriate manner. Removes grease, dirt, paint, or rust from surfaces using abrasives, solvents, and brushes or washing tanks to prepare to apply paint. Performs any pickup, rework, and incorporation of changes to the product as required. Moves product within the manufacturing work area of the shop, including across aisles, using assigned equipment and complete transactions necessary to move product to the next operation. Supports the continuous flow of products within the manufacturing process by training and assisting employees of the same or lower classification level. Inspects equipment, structures, or materials to identify the cause of errors or other problems or defects. Analyzes information and evaluates results to choose the best solution and solves problems as pertains to the paint process. Ensures daily logs are completed prior to paint operations. Additional Duties: Compliance with governing regulations including but not limited to BAC, OSHA, and customer specifications. Meet job functions as evident by skills matrix. Provide support for Lean manufacturing and continuous improvement initiatives, companywide. Other duties, reporting, special assignments, or projects as needed and assigned. Must remain current with, and complete all required training as assigned. Must adhere to Company Corporate EHS Policy and department, occupation, and task specific safety protocols, including but not limited to Personal Protective Equipment (PPE) requirements. This role requires the use of a properly fit tested respirator clear of impeding facial hair. Qualifications: 3+ years overall production experience in a manufacturing environment, preferably in a regulated industry (aerospace). Ability to work from prints, sketches, specifications, and written/verbal instruction. Can match or detect differences among colors, including shades of color and brightness. Ability to remain steady while moving an arm or while holding arm and hand in position. See details at close range. Make precise movements of the fingers to grasp, manipulate or assemble small objects. Ability to quickly move hand, hand with armor two hands to grasp, manipulate or assemble objects. Ability to meet deadlines and plan accordingly. Strong technical and mechanical ability. Good interpersonal skills. Team and individually goal oriented. Experience with Continuous Improvement. Must submit to and satisfactorily pass any pre-employment screening required for employment with the Company. Must take medical exams required by law, in conjunction with occupation specific activities, the physical work environment, and ongoing industrial hygiene sampling results. Depending on assignment, may be required to use stairs, remain upright and/or seated for prolonged timeframes, intermittently reposition the body per various tasks performed, and use various tools and work-related supplies. May be required to perform manual lifting activities, not to exceed a 40lb lift performed by one individual. Education: High School diploma or GED.

Job Description We are looking for a skilled Painter to paint the interior and exterior of structures, buildings and other surfaces for multiple residential apartment complexes in San Francisco. An excellent painter is knowledgeable in selecting the right material for their job. They have experience in painting with various tools and in various heights and spaces while observing all safety measures. They must be reliable and deft as well as possess great attention to detail in completing their duties. We are looking for an experienced Painter to join our team! What We Offer: Gas Allowance Cell Phone Stipend Generous Paid time off & company holidays Health, Dental & Vision insurance Life & Disability insurance 401k with company match Responsibilities - Painter: Minimum of 2-years of painting experience Handles designated work orders in a timely manner Assists in maintaining a clean and orderly shop Knows when to escalate any maintenance issues to management Maintains a courteous and professional demeanor with all residents, prospective residents, coworkers and vendors. Qualifications - Maintenance HVAC Technician: Minimum of 2-year painting experience Display proficiency while performing work orders Must be team-oriented, dependable, resourceful, flexible, and results-driven Valid driver's license and reliable transportation

Valence Surface Technologies is a full-service surface finishing company specializing in the commercial aerospace, defense, space and satellite industries. With ten strategically located sites across the United States, Valence provides a start to finish solution from NDT and chemical processing, to paint and sub-assembly. Responsibilities Prepare aircraft surfaces for painting by cleaning, sanding, and masking areas as required. Apply primers, paints, and coatings to aircraft surfaces using spray guns, brushes, and other tools. Ensure the proper mixing and application of paint materials to achieve desired finish and durability. Inspect painted surfaces for quality and make necessary touch-ups or corrections. Follow safety protocols and maintain a clean and organized work environment. Collaborate with other team members to meet project deadlines and quality standards. Maintain accurate records of paint usage and inventory. Qualifications High school diploma or equivalent; vocational training in painting or related field preferred. Proven experience as a painter, preferably in the aerospace industry. Knowledge of various paint types, application techniques, and surface preparation methods. Ability to read and interpret technical drawings and specifications. Strong attention to detail and commitment to quality. Excellent hand-eye coordination and manual dexterity. Ability to work independently and as part of a team. Good communication skills and ability to follow instructions. Reasonable Accommodations Statement To accomplish this job successfully, an individual must be able to perform, with or without reasonable accommodation, each essential function satisfactorily. Reasonable accommodations may be made to help enable qualified individuals with disabilities to perform the essential functions.

Painter II - 1st Shift Anniston, AL New Flyer is North America's heavy-duty transit bus leader, providing sustainable mobility solutions through transit buses, technology, and infrastructure. New Flyer is a subsidiary of NFI Group, a leading independent bus and coach manufacturer and a leader in electric mass mobility solutions. Building on its 90+ year legacy of innovation, New Flyer is the only manufacturer offering all three types of zero-emission transit buses, with over 1,900 zero-emission buses delivered to date. Proudly serving all 25 of the largest transit agencies in North America, New Flyer actively supports over 35,000 heavy-duty transit buses currently operated by approximately 500 agencies. POSITION SUMMARY: The Painter II will be responsible for the preparation and application of primer and finish coatings on transit buses. This role requires a thorough understanding of paint application processes, a keen eye for detail, and the ability to work effectively within a team environment. The ideal candidate will work under the guidance of more senior staff to develop their skills further and will ensure that all work adheres to safety and quality standards. Requirements High school diploma or equivalent; certification in painting or related field is a plus. Previous experience in automotive or industrial painting preferred. Strong attention to detail and ability to differentiate color shades. Ability to work well under pressure and meet deadlines. Strong communication and team collaboration skills. Must be able to lift up to 50 pounds and perform physical tasks related to the position. Willingness to work in a dynamic production environment and adhere to safety regulations Benefits OUR WHY: We exist to move people. Our mission is to design and deliver exceptional transportation solutions that are safe, accessible, e fficient and reliable. NFI Group is a leading independent global bus manufacturer providing a comprehensive suite of mass transportation solutions. News and information are available at ***************** ***************** ***************** **************** ************************* ************************* and ************** " (New Flyer/Carfair/Arboc/MCI/NFI Parts/NFI) is committed to administering all employment matters in accordance with the value we place on fostering an inclusive and welcoming workplace that values the contributions of all team members. We ensure that all employment decisions are based upon merit and comply with applicable employment legislation and requirements. Accommodations are available at all stages of the recruitment process, at the candidates' request . #NFI Investor Relations | NFI Group The Investor Relations website contains information about NFI Group's business for stockholders, potential investors, and financial analysts.

JOB DESCRIPTION Job Title: Painter Department: Maintenance Reports To: Structures Supervisor, Structures Manager ESSENTIAL DUTIES AND RESPONSIBILITIES: Duties and responsibilities include, but are not limited to, Be able to accomplish assigned aircraft paint requirements. Ensure that GMM, RSM, and FAA regulations and procedures are being followed. Keep a clean and safe work area at all times. Ensure that waste materials, paint, Alodine, and other fluids are handled properly. Perform any other duties assigned by the Paint Lead, or Structures Supervisor, and Structures Manager. Interface with the Paint Lead, and Structures Manager to recommend improvements needed to increase performance and quality. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Must be able to work overtime, weekends & days off. EDUCATION and/or EXPERIENCE: High school graduate; experience in exterior prep and paint on commercial category aircraft. LANGUAGE SKILLS Ability to read, write and understand spoken and written English. Ability to write routine reports and correspondence.

Job Title: Painter Department: Maintenance Reports To: Structures Supervisor, Structures Manager ESSENTIAL DUTIES AND RESPONSIBILITIES: Duties and responsibilities include, but are not limited to, Be able to accomplish assigned aircraft paint requirements. Ensure that GMM, RSM, and FAA regulations and procedures are being followed. Keep a clean and safe work area at all times. Ensure that waste materials, paint, Alodine, and other fluids are handled properly. Perform any other duties assigned by the Paint Lead, or Structures Supervisor, and Structures Manager. Interface with the Paint Lead, and Structures Manager to recommend improvements needed to increase performance and quality. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Must be able to work overtime, weekends & days off. EDUCATION and/or EXPERIENCE: High school graduate; experience in exterior prep and paint on commercial category aircraft. LANGUAGE SKILLS Ability to read, write and understand spoken and written English. Ability to write routine reports and correspondence.

Job Summary: We are seeking a skilled and detail-oriented Full-Time Apartment Complex Painter to join our maintenance team. The ideal candidate will be responsible for painting and finishing tasks to maintain and enhance the appearance of our apartment complex. This role requires proficiency in various painting techniques, attention to detail, and the ability to work efficiently both independently and as part of a team. Key Responsibilities: Painting and Finishing: Prepare surfaces for painting by scraping, sanding, filling holes, and priming. Apply paint, varnish, stains, and other finishes to interior and exterior surfaces using brushes, rollers, or spray equipment. Ensure paint and finishes are applied evenly and meet quality standards. Surface Maintenance: Repair and maintain painted surfaces, including touch-ups and color matching. Remove old paint, graffiti, or stains as necessary. Equipment and Material Management: Maintain and clean painting tools and equipment. Manage inventory of painting supplies, including ordering materials as needed. Safety and Compliance: Follow all safety guidelines and regulations, including the proper handling and disposal of hazardous materials. Ensure compliance with local building codes and company policies. Collaboration: Work closely with the maintenance team to prioritize and complete work orders in a timely manner. Communicate effectively with property management and residents to minimize disruptions. Qualifications: High school diploma or equivalent. Proven experience as a professional painter, preferably in a residential or commercial setting. Proficient in various painting techniques and tools. Knowledge of surface preparation and finishing methods. Ability to match colors and mix paints accurately. Strong attention to detail and commitment to quality. Good physical stamina and the ability to work in various environments (indoor and outdoor). Excellent communication and teamwork skills. Basic knowledge of maintenance and repair tasks is a plus. Valid driver's license and reliable transportation. Working Conditions: Full-time position with standard working hours; occasional overtime may be required. Work involves physical labor, including standing, climbing ladders, and lifting heavy materials. Exposure to paint fumes, solvents, and other chemicals; proper protective equipment will be provided. Benefits: Health, dental, and vision insurance Paid time off (PTO) and holidays If you are a dedicated and experienced painter looking to contribute to a dynamic team, we invite you to apply for this position. Please submit your resume and cover letter to [Your Contact Information]. Chamberlin and Associates is an equal opportunity employer and values diversity in the workplace. We encourage all qualified individuals to apply. All employment offers are contingent upon the successful completion of a standard background check, which reviews records for the past seven (7) years, in compliance with applicable federal, state, and local laws.

Job Description Job Summary: We are seeking a skilled and detail-oriented Full-Time Apartment Complex Painter to join our maintenance team. The ideal candidate will be responsible for painting and finishing tasks to maintain and enhance the appearance of our apartment complex. This role requires proficiency in various painting techniques, attention to detail, and the ability to work efficiently both independently and as part of a team. Key Responsibilities: Painting and Finishing: Prepare surfaces for painting by scraping, sanding, filling holes, and priming. Apply paint, varnish, stains, and other finishes to interior and exterior surfaces using brushes, rollers, or spray equipment. Ensure paint and finishes are applied evenly and meet quality standards. Surface Maintenance: Repair and maintain painted surfaces, including touch-ups and color matching. Remove old paint, graffiti, or stains as necessary. Equipment and Material Management: Maintain and clean painting tools and equipment. Manage inventory of painting supplies, including ordering materials as needed. Safety and Compliance: Follow all safety guidelines and regulations, including the proper handling and disposal of hazardous materials. Ensure compliance with local building codes and company policies. Collaboration: Work closely with the maintenance team to prioritize and complete work orders in a timely manner. Communicate effectively with property management and residents to minimize disruptions. Qualifications: High school diploma or equivalent. Proven experience as a professional painter, preferably in a residential or commercial setting. Proficient in various painting techniques and tools. Knowledge of surface preparation and finishing methods. Ability to match colors and mix paints accurately. Strong attention to detail and commitment to quality. Good physical stamina and the ability to work in various environments (indoor and outdoor). Excellent communication and teamwork skills. Basic knowledge of maintenance and repair tasks is a plus. Valid driver's license and reliable transportation. Working Conditions: Full-time position with standard working hours; occasional overtime may be required. Work involves physical labor, including standing, climbing ladders, and lifting heavy materials. Exposure to paint fumes, solvents, and other chemicals; proper protective equipment will be provided. Benefits: Health, dental, and vision insurance Paid time off (PTO) and holidays If you are a dedicated and experienced painter looking to contribute to a dynamic team, we invite you to apply for this position. Please submit your resume and cover letter to [Your Contact Information]. Chamberlin and Associates is an equal opportunity employer and values diversity in the workplace. We encourage all qualified individuals to apply. All employment offers are contingent upon the successful completion of a standard background check, which reviews records for the past seven (7) years, in compliance with applicable federal, state, and local laws.

The role of Painter I at New Flyer focuses on the application of various liquid coatings, including primers, single-stage topcoats, and base/clear systems. This position also involves a mentoring component, as Painter I employees are expected to train and guide Painter II colleagues, contributing to an upskilled and knowledgeable workforce within the Paint department. Working hours are 3:00pm - 1:30am, Monday - Thursday with the possibility of overtime on Friday's from 3:00pm - 11:30pm. Requirements What You Will Do: • Perform all functions of a Painter I job independently with minimal supervision in a fast-paced production environment. • Proficient in spraying solid and high metallic colors to meet New Flyer standards. • Understand and utilize equipment for surface preparation before painting applications. • Read and interpret paint drawings to apply stencils or premask for stripes or other paint designs. • Apply fine line tape for repairs or initial installations of paint striping. • Develop a comprehensive understanding of quality paint standards to ensure adherence to New Flyer benchmarks. • Follow all painting safety policies and procedures rigorously. • Capable of regularly lifting and moving up to 10 pounds, frequently up to 25 pounds, and occasionally up to 50 pounds. • Must be able to bend, stoop, reach, and climb safely while working with ladders. • Wear a respirator for up to eight hours as required. • Maintain cleanliness in the work area, adhering to 5S and other lean principles. • Take on additional responsibilities as assigned by management. • Regular attendance is essential, ensuring you are at your workstation when the shift begins. Benefits Competitive Wages - $26.49 1st Shift - 1st pay increase at 5 months 401K with generous company match On-the-job training provided in continuous learning environment Advancement opportunities with a growing company Be part of a team who is leading the world's electrification of mass mobility

Job Description The role of Painter I at New Flyer focuses on the application of various liquid coatings, including primers, single-stage topcoats, and base/clear systems. This position also involves a mentoring component, as Painter I employees are expected to train and guide Painter II colleagues, contributing to an upskilled and knowledgeable workforce within the Paint department. Working hours are 3:00pm - 1:30am, Monday - Thursday with the possibility of overtime on Friday's from 3:00pm - 11:30pm. Requirements What You Will Do: • Perform all functions of a Painter I job independently with minimal supervision in a fast-paced production environment. • Proficient in spraying solid and high metallic colors to meet New Flyer standards. • Understand and utilize equipment for surface preparation before painting applications. • Read and interpret paint drawings to apply stencils or premask for stripes or other paint designs. • Apply fine line tape for repairs or initial installations of paint striping. • Develop a comprehensive understanding of quality paint standards to ensure adherence to New Flyer benchmarks. • Follow all painting safety policies and procedures rigorously. • Capable of regularly lifting and moving up to 10 pounds, frequently up to 25 pounds, and occasionally up to 50 pounds. • Must be able to bend, stoop, reach, and climb safely while working with ladders. • Wear a respirator for up to eight hours as required. • Maintain cleanliness in the work area, adhering to 5S and other lean principles. • Take on additional responsibilities as assigned by management. • Regular attendance is essential, ensuring you are at your workstation when the shift begins. Benefits Competitive Wages - $26.49 1st Shift - 1st pay increase at 5 months 401K with generous company match On-the-job training provided in continuous learning environment Advancement opportunities with a growing company Be part of a team who is leading the world's electrification of mass mobility

Inspect details and evaluate the painting work required for the part. Effectively establish the correct paint for the application as flowed down by shop paperwork. Mix paints as specified by supplied directions or Technical Data Sheets. Prepare and perform minor sanding to detail surface before applying paint. Paint effectively on different surfaces and metals. Ability to use spray gun or perform other paint methods. Able to effectively manage time and complete all delegated work within the specified time. Work in a team and coordinate work functions with fellow workers. WORK ENVIRONMENT Work is performed in shop conditions and can be in excess of 100 degrees Fahrenheit. Company Benefits: Medical, Dental, Vision, Long term Disability, Employee Assistance Program, 401(K)-3% Match, Holiday Pay

Inspect details and evaluate the painting work required for the part. Effectively establish the correct paint for the application as flowed down by shop paperwork. Mix paints as specified by supplied directions or Technical Data Sheets. Prepare and perform minor sanding to detail surface before applying paint. Paint effectively on different surfaces and metals. Ability to use spray gun or perform other paint methods. Able to effectively manage time and complete all delegated work within the specified time. Work in a team and coordinate work functions with fellow workers. WORK ENVIRONMENT Work is performed in shop conditions and can be in excess of 100 degrees Fahrenheit. Company Benefits: Medical, Dental, Vision, Long term Disability, Employee Assistance Program, 401(K)-3% Match, Holiday Pay

Reports to: Department Supervisor Type: Full-Time Schedule: 2nd Shift (3:30pm-12am) To accomplish this job successfully, an individual must be able to perform, with or without reasonable accommodation, each essential function satisfactorily. Reasonable accommodations may be made to help enable qualified individuals with disabilities to perform the essential functions. Must be able to mix and measure paint per specifications. Review work order and confirm mixed paint and part match, prior to painting in booth Clean parts as per specification Paint part according to specification and thickness Keep paint booth filters changed, booth FOD free and complete paperwork Post paint inspection of parts for appearance and proper coverage Able to paint effectively on different surfaces and metals Applies some advanced skills that allow employee to adapt and meet some complex or non-routine situations Observe safety regulations and wear protective masks and clothing during spray painting operations Complete the paint daily checklist Properly utilizes all PPE required under OSHA Guidelines Maintains all paint equipment Other duties as assigned SKILLS & ABILITIES Education: High School Graduate or General Education Degree (GED): Required Experience: 1 plus years of experience in Aircraft Painting Other Physical Requirements Vision (Near, Distance) Sense of Sound - Able to hear average conversations Sense of Touch Ability to wear Personal Protective Equipment (PPE) - Safety Glasses Standing for long periods of time Benefits: Compensation Range $18.36 - $24.67 (DOE) Medical, Dental, Vision, Employer Paid Basic Life, Supplemental Life Insurance, 401k with an Employer Match Generous Paid Time Off program 8 Holidays and 1 Floater Holiday Valence Surface Technologies is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Additionally, Valence Surface Technologies participates in the E-Verify program to ensure employment eligibility of newly hired employees. WORK ENVIRONMENT The majority of work is performed in a manufacturing setting. Work is performed in shop conditions and can be more than 100 degrees Fahrenheit. This position requires access to knowledge and technical data regulated by the International Traffic in Arms Regulations (ITAR). Valence Surface Technologies is required to verify that applicants meet ITAR requirements prior to employment for this role.

Job Status: Onsite, Full-Time Pay Range: $17.23 - $25.00 per hour (DOE) Painter is responsible for performing all phases of surface preparation and painting on aircraft parts. This includes interpreting job specifications, mixing paints, preparing surfaces, and applying coatings in accordance with technical documentation and quality standards. To perform this job successfully, an individual must be able to execute each essential duty satisfactorily, with or without reasonable accommodation. Accommodations may be made to support qualified individuals with disabilities. Inspect parts to determine painting requirements based on shop paperwork Select and verify appropriate paint per job specifications Mix paint in accordance with Technical Data Sheets or manufacturer's instructions Prepare surfaces, including minor sanding and cleaning Apply coatings such as epoxy, lacquer, resin, and final color coats Paint a variety of surfaces and metals using proper techniques Replace paint booth filters contaminated with chromate or solvents Adhere to safety protocols, including use of PPE and respirators Coordinate tasks with team members to ensure workflow efficiency Complete assigned tasks within designated time frames Perform other duties as assigned Required Experience & Skills: Experience: Minimum of 5 years' experience in aircraft painting or aerospace surface processing Skills & Competencies: Accountability Accuracy and attention to detail Applied learning and continuous improvement Strong oral communication Customer-focused attitude Enthusiastic and motivated Ethical conduct and integrity Goal-oriented mindset Initiative and sound judgment Reliable and responsible Physical & Sensory Requirements: Near, peripheral, color, and depth vision Ability to hear typical conversations Sense of smell and touch Ability to wear all required Personal Protective Equipment (PPE), including respirators and protective clothing

TITLE Painter I Performs skilled work in the painting of buildings, fixtures and equipment. Work involves preparation of various types of surfaces for painting and the application of paint by use of spray guns, rollers or brushes. Work is performed under general supervision and performance is based upon completion of assignments and results obtained. The performance evaluation is conducted through the performance evaluation system and in accordance with the University Policies & Procedures. ORGANIZATIONAL RELATIONSHIPS Reports to: Assistant Supervisor, Building Maintenance Supervises: No supervisory responsibilities ESSENTIAL DUTIES - May include, but not limited to the following: Prepares surfaces for paint by scraping, sandpapering and cleaning. Repairs plastering and fills holes in sheetrock. Applies paints and other finishes with brushes and spraying equipment. Mixes and matches paints, varnishes, lacquers and shellacs. Refinishes and restores interior and exterior painted surfaces. Follows prescribed health and safety requirements. ADDITIONAL DUTIES Transports material and supplies to the work site. Maintains condition and repair of equipment. Performs other duties as requested. EDUCATION Completion of the tenth grade required. High school diploma or equivalent preferred. EXPERIENCE Two years journeyman experience as a painter. Job related vocational training or other education may substitute for the required experience on a year-for-year basis. REQUIREMENTS Valid driver's license issued by the State of Texas and a safe driving record such as required to attain Driver's Authorization through the university. Regular and reliable attendance at the University during regular scheduled days and work hours is an essential function of this position. All employees share the responsibility of maintaining information security and privacy requirements within the university by adhering to Federal and State regulations, and TWU Policies & Procedures. KNOWLEDGE, SKILLS, AND ABILITIES - The following are essential: Knowledge of the standard methods, practices, tools, equipment and materials of the painting trade. Knowledge of the hazards and safety precautions of the trade. Ability to use trade related equipment including paint sprayers, high pressure washers, paint mixers, respirators and water / chemical proof suits. Ability to use tools such as a paint brush, roller, scraper, taping and bedding tools, extension poles and stilts (optional). Ability to respond to emergency situations in a timely manner. PHYSICAL DEMANDS The physical demands described in the Essential Duties and below are representative of those that must be met by an employee to successfully perform the essential duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties. The employee may be required to travel. Must be able to climb ladders over 6 feet and work out of high lifts and / or scaffolding. The employee must have the ability to occasionally lift and/or move up to 60 pounds. WORK ENVIRONMENT All employees are responsible for maintaining an environment that is free from discrimination, intimidation, harassment, including sexual harassment. The noise level is usually moderate to loud. Exposure to any number of elements but with none present to the extent of being disagreeable. May be required to work in conditions including cold, heat, temperature swings, noise, outdoors and indoors. May be required to work in locations that involve hazardous environments requiring protective equipment that conforms to OSHA regulations and some physical discomfort due to temperature, dust and noise. SAFETY TWU promotes a safe working environment. Employees are responsible for completing assigned tasks safely and efficiently, and supervisors are responsible for creating and maintaining a safe work environment. Employees must report any unsafe work conditions or practices, as well as any near-miss incidents, to their supervisor and Risk Management. Supervisors and employees should ensure that injury/accident reports are submitted to the Office of Human Resources and Risk Management within 24 hours of the incident. The job description does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change. Texas Woman's University strives to provide an educational environment that affirms the rights and dignity of each individual, fosters diversity, and encourages a respect for the differences among persons. Discrimination or harassment of any kind is considered inappropriate. Texas Woman's University is committed to equal opportunity in employment and education and does not discriminate on the basis of race, color, religion, gender, sex, sexual orientation, ethnic origin, age, veteran's status, or against qualified disabled persons. All positions at Texas Woman's University are deemed security sensitive requiring background checks. If you are a male between the age of 18 and 25, federal law requires that you must be registered with the U.S. Selective Service System, unless you meet certain exemptions under Selective Service law. Under HB 558, enacted by the 76th Texas State Legislature, if you are currently of the age and gender requiring registration with Selective Service, but knowingly and willfully fail to do so, you are ineligible for employment with an agency in any branch of Texas state government. For additional information regarding registration or status, you can contact the Selective Service System at ************ or ************