Production Operator jobs at The Lauridsen Group - 399 jobs

Machine Operator - Various Roles Shifts Available: 1st, 2nd, and 3rd Shift Pay: $17.76-$18.84 per hour Purpose of the Job Operate fabrication equipment safely and efficiently to meet production schedules, ensure product accuracy, and maintain high quality standards. This role independently sets up and operates machinery used for cutting, slitting, pressing, center-seaming, and processing belting materials, ensuring all orders meet specification requirements. Key ResponsibilitiesEquipment Operation & Production Set up and operate fabrication equipment such as cutters, slitters, seamers, press machinery, and automatic cutting tables. Maintain tight tolerances and verify accurate measurements. Process various belting and Transilon materials per work order and quality standards. Inspect completed work for accuracy and route orders to the next workstation, stock, or shipping. Properly pack belts and accessory items to prevent damage during shipping. Load and unload incoming/outgoing shipments as required. Safely operate forklifts and other material-handling equipment (certification required). Quality & Safety Follow all safety procedures to prevent injuries and protect equipment. Maintain a clean and safe work environment. Report material defects, equipment issues, and quality concerns promptly. Collaboration Work closely with supervisors, Quality Control, Shipping, Inventory, and other departments. Support additional areas such as Warehouse or Postal as needed. Performance Measures Accuracy in meeting order specifications Consistent product quality Efficiency and ability to meet production deadlines Effective communication and teamwork Regular and predictable attendance Job RequirementsPhysical Requirements Frequent lifting up to 50 lbs; occasional handling up to 100 lbs and maneuvering rolls up to 500 lbs with equipment. Continuous standing and walking; frequent pushing/pulling and handling of materials. Occasional bending, reaching, crouching, and twisting. Ability to use hand, arm, and foot controls. Clear near-vision for reading work orders and performing precision measurements. Ability to hear and communicate clearly in a production environment. Environmental Conditions Exposure to cutting tools, presses, forklifts, and machinery. Possible exposure to chemical vapors/odors. Typical indoor environment: 68-72°F, 50-55% humidity. Occasional exposure to outdoor conditions when loading/unloading. Qualifications High School Diploma or GED Forklift certification (or ability to obtain) Ability to read and interpret work orders in English and use metric measurements Strong attention to detail and ability to identify material types Ability to safely and independently set up and operate fabrication machinery Pay Details: $17.76 to $18.84 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Machine Operator - Various Roles Shifts Available: 1st, 2nd, and 3rd Shift Pay: $17.76-$18.84 per hour Purpose of the Job Operate fabrication equipment safely and efficiently to meet production schedules, ensure product accuracy, and maintain high quality standards. This role independently sets up and operates machinery used for cutting, slitting, pressing, center-seaming, and processing belting materials, ensuring all orders meet specification requirements. Key ResponsibilitiesEquipment Operation & Production Set up and operate fabrication equipment such as cutters, slitters, seamers, press machinery, and automatic cutting tables. Maintain tight tolerances and verify accurate measurements. Process various belting and Transilon materials per work order and quality standards. Inspect completed work for accuracy and route orders to the next workstation, stock, or shipping. Properly pack belts and accessory items to prevent damage during shipping. Load and unload incoming/outgoing shipments as required. Safely operate forklifts and other material-handling equipment (certification required). Quality & Safety Follow all safety procedures to prevent injuries and protect equipment. Maintain a clean and safe work environment. Report material defects, equipment issues, and quality concerns promptly. Collaboration Work closely with supervisors, Quality Control, Shipping, Inventory, and other departments. Support additional areas such as Warehouse or Postal as needed. Performance Measures Accuracy in meeting order specifications Consistent product quality Efficiency and ability to meet production deadlines Effective communication and teamwork Regular and predictable attendance Job RequirementsPhysical Requirements Frequent lifting up to 50 lbs; occasional handling up to 100 lbs and maneuvering rolls up to 500 lbs with equipment. Continuous standing and walking; frequent pushing/pulling and handling of materials. Occasional bending, reaching, crouching, and twisting. Ability to use hand, arm, and foot controls. Clear near-vision for reading work orders and performing precision measurements. Ability to hear and communicate clearly in a production environment. Environmental Conditions Exposure to cutting tools, presses, forklifts, and machinery. Possible exposure to chemical vapors/odors. Typical indoor environment: 68-72°F, 50-55% humidity. Occasional exposure to outdoor conditions when loading/unloading. Qualifications High School Diploma or GED Forklift certification (or ability to obtain) Ability to read and interpret work orders in English and use metric measurements Strong attention to detail and ability to identify material types Ability to safely and independently set up and operate fabrication machinery Pay Details: $17.76 to $18.84 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Machine Operator - Various Roles Shifts Available: 1st, 2nd, and 3rd Shift Pay: $17.76-$18.84 per hour Purpose of the Job Operate fabrication equipment safely and efficiently to meet production schedules, ensure product accuracy, and maintain high quality standards. This role independently sets up and operates machinery used for cutting, slitting, pressing, center-seaming, and processing belting materials, ensuring all orders meet specification requirements. Key ResponsibilitiesEquipment Operation & Production Set up and operate fabrication equipment such as cutters, slitters, seamers, press machinery, and automatic cutting tables. Maintain tight tolerances and verify accurate measurements. Process various belting and Transilon materials per work order and quality standards. Inspect completed work for accuracy and route orders to the next workstation, stock, or shipping. Properly pack belts and accessory items to prevent damage during shipping. Load and unload incoming/outgoing shipments as required. Safely operate forklifts and other material-handling equipment (certification required). Quality & Safety Follow all safety procedures to prevent injuries and protect equipment. Maintain a clean and safe work environment. Report material defects, equipment issues, and quality concerns promptly. Collaboration Work closely with supervisors, Quality Control, Shipping, Inventory, and other departments. Support additional areas such as Warehouse or Postal as needed. Performance Measures Accuracy in meeting order specifications Consistent product quality Efficiency and ability to meet production deadlines Effective communication and teamwork Regular and predictable attendance Job RequirementsPhysical Requirements Frequent lifting up to 50 lbs; occasional handling up to 100 lbs and maneuvering rolls up to 500 lbs with equipment. Continuous standing and walking; frequent pushing/pulling and handling of materials. Occasional bending, reaching, crouching, and twisting. Ability to use hand, arm, and foot controls. Clear near-vision for reading work orders and performing precision measurements. Ability to hear and communicate clearly in a production environment. Environmental Conditions Exposure to cutting tools, presses, forklifts, and machinery. Possible exposure to chemical vapors/odors. Typical indoor environment: 68-72°F, 50-55% humidity. Occasional exposure to outdoor conditions when loading/unloading. Qualifications High School Diploma or GED Forklift certification (or ability to obtain) Ability to read and interpret work orders in English and use metric measurements Strong attention to detail and ability to identify material types Ability to safely and independently set up and operate fabrication machinery Pay Details: $17.76 to $18.84 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Adecco is hiring for General Production Associates at Nestle in Gaffney, SC. Nestle has been awarded the Golden Peach Award for “Best Place to Work - Over 25 Employees”. General Production Associates do essential jobs with one of our premier clients, starting pay at $15.20 - $16.20/hr., plus available overtime. As a General Production Associate, you will set up the work area, assist with line setup, and ensure all ingredient codes are verified prior to production. Requirements: This position is entry-level, no experience needed High School Diploma/GED Must be able to lift up to 30 lbs. Reading, Math (addition, subtraction, multiplication, division, fractions, and percentages) Basic mechanical aptitude (i.e., correct use of wrenches, drivers, pliers, and lubrication techniques) preferred Must be able to follow verbal and written instructions Ability to stand for the entire shift and walk around the production What's in this for you? Weekly pay starting at $15.20 - $16.20/hr. Competitive benefits with options such as medical, dental, vision, and 401(k) Generous referral bonuses offered Click on apply now for immediate consideration for these General Production positions in Gaffney, SC! Pay Details: $15.20 to $16.20 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Employment Type: Full-Time Alliance Technical Group is seeking a Manufacturing Technician to join our team! In this role, you will help assemble mobile air monitoring systems that support our emissions source testing teams. If you enjoy hands-on work in a collaborative environment and take pride in building high-quality systems, we'd love to hear from you. What You'll Do Assemble and modify enclosed trailers with electrical and pneumatic equipment Read and interpret system drawings and assemble components accordingly Operate hand tools (pneumatic, electric, and non-electric) Assist with troubleshooting, repairs, and maintenance of Mobile Lab systems Perform inventory management, equipment preparation, and quality control documentation Support shop maintenance and keep the workspace clean and organized Pack and ship equipment as needed What We're Looking For Safety-oriented and detail-focused Valid driver's license General knowledge of electricity (120/240 VAC preferred) Ability to work independently and as part of a team Strong written and verbal communication skills Comfortable using tools such as cordless drills, grinders, saws, tape measures, and ratchets Self-motivated with quick learning skills and strong documentation abilities Physical Requirements Ability to stand, walk, bend, crouch, and stoop consistently Lift up to 50lbs frequently Climb ladders and stairs Use tools requiring dexterity Distinguish between shades of color Work Environment Indoor warehouse/shop setting 40 hours per week On-site position (no regular travel required) What We Offer Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired before July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub In compliance with applicable Pay Transparency laws, Alliance Technical Group provides a range of compensation for job postings within locations that have these requirements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. The pay range for this entry-level role is $18.00-27.00 per hour. Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Adecco is hiring for General Production Associates at Nestle in Gaffney, SC. Nestle has been awarded the Golden Peach Award for “Best Place to Work - Over 25 Employees”. General Production Associates do essential jobs with one of our premier clients, starting pay at $15.20 - $16.20/hr., plus available overtime. As a General Production Associate, you will set up the work area, assist with line setup, and ensure all ingredient codes are verified prior to production. Requirements: This position is entry-level, no experience needed High School Diploma/GED Must be able to lift up to 30 lbs. Reading, Math (addition, subtraction, multiplication, division, fractions, and percentages) Basic mechanical aptitude (i.e., correct use of wrenches, drivers, pliers, and lubrication techniques) preferred Must be able to follow verbal and written instructions Ability to stand for the entire shift and walk around the production What's in this for you? Weekly pay starting at $15.20 - $16.20/hr. Competitive benefits with options such as medical, dental, vision, and 401(k) Generous referral bonuses offered Click on apply now for immediate consideration for these General Production positions in Gaffney, SC! Pay Details: $15.20 to $16.20 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job DescriptionA night on the line Our manufacturing client is hiring production workers for the night shift ASAP. Step into an excellent environment with supportive, hard-working teammates. What to expect Night shift opportunities with immediate start. Collaborative crew, steady pace, and dependable work. Compliance Drug screen and background check required. How to apply Call or stop by our office ASAP! You can text or call 919-788-9575.

**Job Title: General Production Worker** **Job Description** As a General Production Worker, you will be responsible for ensuring quality control through in-process testing and inspection of products. You will operate equipment, conduct audits, and contribute to process improvements while adhering to defined specifications. **Responsibilities** + Perform in-process testing or inspection of products as per specifications. + Report and record findings or results of tests/inspections, and notify management of any non-conformances. + Operate CMM and take appropriate follow-up actions as required. + Conduct internal audits of processes and procedures, including manufacturing set-up and production. + Conduct daily scrap collection for the assigned shift, perform analysis, and recommend improvements. + Acquire general knowledge of the product being manufactured, including fit, form, and function. + Define problems, collect data, establish facts, and draw valid conclusions with complex machining, assembly, and testing issues. + Implement corrective and preventative actions as required. + Develop training plans and materials, conduct training, and maintain professional competency. + Perform technical duties or special assignments as assigned by management. **Essential Skills** + General production and inspection skills. + Proficiency in using measuring tools such as tape measures, calipers, and micrometers. + Experience with blueprint reading and interpretation. + Familiarity with quality inspection and control processes. + Knowledge of robotic welding and familiarity with Fanuc robots. + Experience in machine operating. **Additional Skills & Qualifications** + Experience in a manufacturing or steel fabrication environment is preferred. + Computer literacy in Microsoft Windows software is preferred. + Familiarity with SWI/SOP processes. + Good understanding of shop math, including fraction to decimal conversions. + Good written and oral communication skills. **Why Work Here?** This opportunity offers a positive work culture with an average workforce tenure of over 10 years. Employees enjoy full benefits, including a 401k, and there is a strong emphasis on promoting from within. **Work Environment** The work environment is well-lit and set in a fab environment, conducive to efficient production and quality assurance processes. **Job Type & Location** This is a Contract to Hire position based out of Duluth, GA. **Pay and Benefits** The pay range for this position is $23.00 - $23.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Duluth,GA. **Application Deadline** This position is anticipated to close on Jan 20, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

**Job Title: Production Operations Technician** **Job Description** As a Production Operations Technician, you will coordinate the assembly, testing, painting, packaging, and shipping of products. Your role involves various manufacturing tasks such as assembling, operating manual and automatic equipment, setting up machines, and testing. You will rotate among different stations within assembly cells, performing repetitive tasks to meet customer demands while using power tools like pneumatic wrenches, drills, and torque guns. **Responsibilities** + Coordinate parts, assembly, test, paint, package, and shipping of company products. + Perform assembly and operation of manual and automatic equipment. + Set up machines and test unit assemblies and subassemblies. + Dismantle unit assemblies and work stations according to work process instructions. + Rotate among all stations within each assembly cell to meet customer demands. + Repair final unit assemblies and complex subassemblies. **Essential Skills** + 6 months prior production experience. + 6 months experience in an assembly-based position. + Ability to read, write, and understand instructions. **Additional Skills & Qualifications** + Knowledge in production, assembly, and automotive sectors. + Experience in using pneumatic tools and equipment. **Why Work Here?** Join a dynamic team in a large manufacturing facility with numerous opportunities for growth and development. Enjoy working in an environment that values skill development and offers a consistent work pace to meet customer demands. **Work Environment** This role is based in a large manufacturing facility with approximately 270-290 production employees across 13-14 assembly lines. The work involves handling hydraulic components, requiring the use of oil for lubrication. Available shifts are 1st Shift: 6-2, 2nd Shift: 2-10, and 3rd Shift: 10-6. The dress code includes steel-toed boots, jeans, a t-shirt, and gloves as products often have oil on them. **Job Type & Location** This is a Contract position based out of AMES, IA. **Pay and Benefits** The pay range for this position is $18.00 - $20.70/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in AMES,IA. **Application Deadline** This position is anticipated to close on Jan 23, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Now Hiring: 2nd Shift Machine Operator Shift: Monday-Thursday, 4:00 PM - 2:00 AM Pay: Starting at $18.50/hour Schedule: Must be able to train potentially on 1st shift (6a-4p) for up to one month Looking for a steady job with great pay and 3-day weekends? Join our team as a Machine Operator and help produce high-quality plastic components in a fast-paced manufacturing environment. Prior experience in production is a plus, but not required-we provide full training! Why You'll Love Working With Us: Weekly Pay - Reliable, on-time paychecks every Friday Paid Training - Learn everything you need on the job Performance Incentives - Safety and attendance rewards Referral Bonuses - Earn extra by bringing in friends or family No Fees - Applying and getting hired is always FREE! How to Apply: Online: Click the “Apply” button to get started In Person: Stop by our office at 308 Chestnut Street, Atlantic, IA 50022 By Phone: Call our friendly team at ************** Be sure to select the Atlantic branch when applying! Don't miss this opportunity to build your future with a company that values hard work and dedication. Apply today and start your path to a rewarding career! Advance Services is an Equal Opportunity Employer

Test Operator - Weekend Shift (Durham, NC) Shift: Saturday & Sunday, flexible 8-12 hours per day (day or night) Pay: $17-$19/hour DOE Position OverviewGraham Personnel Services is assisting a client in Durham, NC fill a Weekend?Shift Test Operator to support testing and quality assurance on semiconductor products. This role involves running test equipment, performing inspections, communicating with team members, and ensuring accurate documentation. The ideal candidate is dependable, detail?focused, and able to work independently over weekend shifts. Key Responsibilities• Test product primarily using established procedures and quality standards.• Operate and monitor semiconductor test equipment and handlers.• Perform hand?testing and support engineering activities as needed.• Document test results, equipment status, and production activity accurately.• Communicate via cell phone, email, and Microsoft Teams.• Maintain a clean, safe, and organized work area. Required Qualifications• Ability to communicate effectively across phone, email, and Teams.• Basic MS Office skills; Excel knowledge is a plus.• Strong attention to detail and accuracy.• Must be reliable and available for weekend?only shifts. #PROF26

Advance Services has an excellent job opportunity available as a Machine Operator in Boone, IA, where you will operate machinery, prepare parts for shipment, and maintain accurate paperwork. Responsible for all aspects of molding, cutting, and foam production, including, but not limited to, quality control and maintaining production standards. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Effectively present information in one-on-one situations to other employees of the organization. Perform basic math skills, including addition, subtraction, multiplication, and division. Demonstrates the ability to work with both metric and standard units of measurement. All other duties will be assigned. 2nd shift 2 pm-10:30 pm Monday-Friday $18hr. Why work for Advance Services? Advance Services is for and about people; we are your employment specialists. Enjoy our easy application process. You NEVER pay a fee! Weekly pay. Fun, Safety, and attendance incentives. Health Benefits to keep you and your family healthy. Great Referral Incentives. Advance Services partners with the top companies in the area! Apply for this job by clicking the Apply button. You will be directed to our website, *********************** Please select a branch near you or call our office at ************ Advance Services is an equal opportunity employer #402

Peeler Machine Operator - Automotive Fabrication Precision. Consistency. Long-Term Career Opportunity. The Peeler Machine Operator is responsible for day-to-day operations within an automotive fabrication environment. This role is critical to maintaining production flow, minimizing downtime, and meeting safety, quality, and output goals. Success in this position requires strong attention to detail, mechanical aptitude, and a commitment to consistency and reliability. Cross-training across multiple fabrication processes is required. Key Responsibilities Operate peeler machines as part of the automotive fabrication process Load and unload machines efficiently to minimize downtime Accurately report production output and scrap Use proper handling techniques to prevent product damage Identify, document, and report machine issues and downtime Communicate regularly with the Supervisor regarding quality defects Coordinate with the Servicer to meet daily production goals Maximize foam usage to achieve optimal yield and reduce waste Use a tape measure and understand standard measuring increments Assist with inventory-related duties as required Maintain continuous focus on departmental goals, safety, and quality standards Required Qualifications (Non-Negotiable) Manufacturing Experience Minimum of two (2) years of strong, consistent manufacturing experience Demonstrated stable work history with no short job tenures Ability to stand, bend, and perform repetitive tasks throughout the shift Assessment Must successfully pass a Math Assessment before moving forward to the interview stage Ideal Candidate Profile Reliable, dependable, and consistent in attendance Detail-oriented with strong mechanical aptitude Comfortable working in a production-driven manufacturing environment Team-oriented mindset with clear and professional communication skills Takes ownership of quality, safety, and performance expectations Why This Is a Strong Long-Term Opportunity Stable manufacturing role in automotive fabrication Clear performance expectations and structured processes Cross-training opportunities to expand technical skills Team-focused environment that values accountability and consistency Ideal for candidates seeking long-term employment, not short-term work Build a Career, Not Just a Job If you have a strong manufacturing background, value consistency, and are looking for a long?term role where performance and reliability matter, the Peeler Machine Operator position offers a solid path forward in automotive fabrication. Apply Today!

Start your career as a Machine Operator with MAU at Milliken Duncan Stewart in LaGrange, GA. As a Machine Operator, you will support production operations by being cross-trained in Warping, Creeling, and Backwinding, ensuring safety, quality, and efficiency standards are met. What We Offer: * Starting pay: $18.75/hr * Temp-to-Hire opportunity (permanent hire after 520 hours) * Medical, dental, and vision insurance * Accident coverage * 401(k) retirement plan * Paid holidays and vacation * Opportunity for advancement * Paid time off What We're Looking For: * Recent machine operator experience preferred * Ability to stand for long periods and lift up to 50 lbs throughout the shift * Willingness to work 10-12 hour shifts * Ability to follow safety guidelines, work instructions, and company policies * Must be able to train on 1st shift (8:00 AM - 4:00 PM) for up to 12 weeks, then transition to 3rd shift (10:00 PM - 8:00 AM) * Must pass a background check and drug screening What You'll Do as a Machine Operator: * Load, unload, and creel yarn packages * Operate winders and related textile machinery * Transport yarn using buggies or carts as needed * Rack yarn across six levels, requiring bending and reaching * Identify and interpret yarn labels and yarn types * Follow all safety, quality, and production requirements * Adhere to work instructions, creel boards, diagrams, and verbal direction from supervisors

Job DescriptionUnited Talent is IMMEDIATELY hiring Machine Operators in the Powder Springs, GA area! The Machine Operator (Orbital Welding) is responsible for setting up, operating, and maintaining orbital welding equipment to produce high-quality welds on tubing, piping, and related components. This role ensures compliance with engineering drawings, welding procedures, safety standards, and quality requirements. Responsibilities: Ability to read and interpret blueprints and welding procedures. Knowledge of stainless-steel tubing/piping and basic welding principles. Strong attention to detail and quality standards. Mechanical aptitude and ability to use basic inspection tools. Experience with calipers, micrometers, and ability to read a tape measure Preferred: Welding certifications or experience in high purity/regulated industries. Pay & Shift: $22/HR Monday-Friday, 7AM - 4:30 PM Requirements: Must Pass a background check and drug screening Strong analytical skills required. ERP knowledge required. Must be at least 18 years old. High school diploma or GED required. Ability to read, write, and interpret blueprints and schematics. Strong understanding of quality control documents, tolerances, and requirements. Mechanically inclined, production-oriented, and safety/quality conscious. Perks & Benefits: Weekly pay via direct deposit or pay card Unlimited Referral Bonuses: Earn $40 when your referral works 40 hours, plus an additional $140 after 140 hours with no cap on referral earnings! Medical Coverage after 60 days How to Apply: To schedule an immediate interview, call 470-645-1650, or apply directly at Current Jobs - United Talent Staffing Services. United Talent is an Equal Opportunity Employer.

Start your new career as a Production Technician with MAU at AHF in Cartersville, GA. As a Production Technician, you will operate and maintain production machinery to support daily manufacturing goals in a fast-paced industrial environment. This is a temp-to-hire opportunity. What We Offer: * $18.00 per hour + overtime opportunities * 6:45 AM - 7:00 PM OR * 6:45 PM - 7:00 AM * Required and optional overtime, including weekends * Health benefits and 401(k) * Temp-to-hire opportunity * On-the-job training with advancement potential * PPE provided * Team-oriented, safety-first workplace culture What We're Looking For: * 2+ years of experience in manufacturing or production * High school diploma or GED * Mechanical aptitude and ability to operate industrial equipment * Ability to lift up to 50 lbs and stand for extended periods * Willingness to work in a non-climate-controlled environment * Forklift certification or experience is a plus (training available) * Strong communication and teamwork skills What You'll Do as a Production Technician: * Operate and monitor production equipment including grinders, glue applicators, finishing lines, and forklifts * Perform equipment start-up, changeover, and shutdown procedures * Load raw materials and inspect finished products to ensure quality * Conduct minor mechanical adjustments and report issues promptly * Accurately document production data, material usage, and downtime * Follow all safety protocols, including PPE use and chemical handling * Work collaboratively to meet daily production targets * Maintain a clean, organized, and safe work environment * Contribute to continuous improvement efforts in quality, efficiency, and waste reduction

Machine Operators - Nonwoven Fabric Production Schedule: Night Shift- 7pm to 7am 12-hour swing shifts on a 3-2-2-3 rotation Work 36 hours one week, 48 hours the next (includes 8 hrs overtime) Always enjoy two days off during the week What You'll Do Operate and monitor production machines following detailed work instructions. Laminator, Slitter, Folder/Gluer, etc. Keep equipment running smoothly and record daily activities in a logbook. Produce high-quality nonwoven fabrics used in surgical gowns and sterilization wraps-where precision and safety matter most. Why Join Us? Hands-on role with growth potential and full-time hire opportunities across the U.S. Be part of a team recognized for excellence: In March 2025, this facility earned the Carolina Star Site Award for outstanding safety standards. Competitive pay, consistent overtime, and a schedule that gives you work-life balance. Apply Now. Click apply online or call/text ************ for more information.

Machine Operators - Nonwoven Fabric Production Schedule: Day Shift- 7am to 7pm 12-hour swing shifts on a 3-2-2-3 rotation Work 36 hours one week, 48 hours the next (includes 8 hrs overtime) Always enjoy two days off during the week What You'll Do Operate and monitor production machines following detailed work instructions. Laminators, Slitters, Folder Gluer and more. Keep equipment running smoothly and record daily activities in a logbook. Produce high-quality nonwoven fabrics used in surgical gowns and sterilization wraps-where precision and safety matter most. Why Join Us? Hands-on role with growth potential and full-time hire opportunities across the U.S. Be part of a team recognized for excellence: In March 2025, this facility earned the Carolina Star Site Award for outstanding safety standards. Competitive pay, consistent overtime, and a schedule that gives you work-life balance. Apply Now. Click apply online or call/text ************ for more information.

Start your new career as a Machine Operator with MAU at Milliken - Live Oak in LaGrange, GA. As a Machine Operator, you will operate machinery in a manufacturing environment to support production and maintain quality standards on a rotating shift schedule. This is a temp-to-hire opportunity. What We Offer: * Starting pay of $15.91/hour * Multiple shifts available | First Shift | Second Shift | Third Shift * 8-Hour Shifts * 10-Hour Shifts * 12-Hour Shifts * Rotating Shifts * Medical, Dental, and Vision Insurance * Accident and Fixed Indemnity Medical coverage * Paid Holidays * Paid Vacation What We're Looking For: * At least 6 months of experience as a Machine Operator * Forklift experience required * Senior operator experience preferred * Ability to follow company policies and safety procedures * Availability to work 12-hour rotating shifts, including weekends What You'll Do as a Machine Operator: * Operate and monitor machines to support production * Adhere to safety and operational procedures * Maintain a clean and organized work area * Collaborate with team members to ensure efficiency * Perform basic troubleshooting and report issues as needed