Top Tool Technician Skills

Below we've compiled a list of the most important skills for a Tool Technician. We ranked the top skills based on the percentage of Tool Technician resumes they appeared on. For example, 15.7% of Tool Technician resumes contained Rental Department as a skill. Let's find out what skills a Tool Technician actually needs in order to be successful in the workplace.

The six most common skills found on Tool Technician resumes in 2020. Read below to see the full list.

1. Rental Department

high Demand
Here's how Rental Department is used in Tool Technician jobs:
  • Tool tech an tool rental department .
  • Helped Tool rental department go from Last in our division to seconded in fist two months in department.
  • Worked in the tool rental department, renting out equipment and repairing equipment when necessary.
  • Started in Garden Department and was moved to Tool Rental Department.
  • Maintain inventory and inventory reports for the tool rental department.
  • Worked as the lead mechanic in the rental department.

Show More

2. Plastic Parts

high Demand
Here's how Plastic Parts is used in Tool Technician jobs:
  • Maintain and repair molds for production of plastic parts.
  • Weld plastic parts using 980 Nm laser tools.
  • Performed precision, first-piece inspections in injection-molded plastic parts.
  • Mold and cast thermoplastic parts.
  • Run production plastic parts from molds as needed
  • Build patterns for open mold fiberglass parts and thermal formplastic parts.

Show More

3. Safety Awareness

high Demand
Here's how Safety Awareness is used in Tool Technician jobs:
  • Promoted safety awareness and environmental consciousness and complied with all applicable safety and environmental procedures and guidelines.
  • Promote safety awareness, environmental conscious and insure quality of performance.
  • Maintain Safety Awareness of chemical and gas in the area while on location.

Show More

4. Lathe Machines

high Demand
Here's how Lathe Machines is used in Tool Technician jobs:
  • Worked on a grinding and lathe machines to make the tips of drill bits to a precise measurement.
  • Can write CNC programs and operate CNC milling and lathe machines(not much training not much exp.)
  • Use of all manual mill and lathe machines, including surface grinders.
  • rebuild dies, make punches, run CNC lathe machines, basic die repair.

Show More

5. Hand Tools

high Demand
Here's how Hand Tools is used in Tool Technician jobs:
  • Hand out other hand tools to plane techs when needed if they had the correct identification to receive tools.
  • Repaired carbide progressive dies using surface grinders, drill presses, lathes, and various hand tools.
  • Bench repair of small electric and gas powered hand tools primarily for the construction industry.
  • Issued, received and stores production tools, hand tools and other test equipment.
  • Remove finished or cured products from dies or molds, using hand tools.
  • Repaired, maintained and rebuilt several hundred pneumatic and hand tools each month.
  • Repaired a variety of hand tools.
  • Maintained electronic wiring, apparatus, instrumentation and fixtures using hand tools and power tools Repaired electrical equipment and appliances.
  • Reassemble repaired electric motors to specified requirements and ratings, using hand tools and electrical meters.
  • Skilled trades.Skills UsedForklift, hand tools, welding, over head crane
  • hand tools and power tools.

Show More

Job type you want
Full Time
Part Time
Internship
Temporary

6. Customer Service

high Demand
Here's how Customer Service is used in Tool Technician jobs:
  • Received multiple merit awards for excellent customer service.
  • Evaluated technician customer service skills.
  • Schedule, train, coach, and develop associates in tool rental department to ensure equipment safety and excellent customer service.
  • Perform customer service to process work orders and contracts.
  • Acquired eight awards for outstanding customer service.
  • Fix and repair rented tools also customer service
  • earned a total of 6 homer awards in less than a year for exceptional customer service and repair quotas.
  • cashier trained for customer service duties, and knowledge of multiple computer programs to perform job.
  • repair tools, ordering and stocking engine parts, running register and customer service.
  • Clean, maintain and repair tools General customer service
  • Clean, Repair and maintain all equipment Customer Service
  • Rent tools and equipment to customers Maintain, clean, service and repair tools and equipment Customer service
  • Received two "service excellence" awards for outstanding commitment to customer service.
  • Tool Rental Tech Maintain & Service All Rental Equipment Computer & Cash Register Customer Service
  • fix and repair of 2 and 4 stroke engines customer service inventory of store products stocking of store products

Show More

7. Preventative Maintenance

high Demand
Here's how Preventative Maintenance is used in Tool Technician jobs:
  • Performed maintenance and preventative maintenance duties.
  • Performed Preventative maintenance on assembly stations.
  • Coordinated with other areas of the company to schedule and follow through with preventative maintenance on their die cast tools.
  • Complete preventative maintenance on tooling and plant equipment, including; tear down, repair, moving and reassembly.
  • Coordinated with necessary tool shops with regards to repairs and preventative maintenance that could not be done in-house.
  • Perform all repairs and preventative maintenance on the molds in order to maintain optimum performance during production.
  • Coordinate repair, upkeep and preventative maintenance of all tools to ensure optimal performance.
  • Worked with the facility management to schedule in needed repairs or preventative maintenance schedules.
  • Assisted with troubleshooting equipment, cleaning and equipment preventative maintenance, maintaining 5S standards.
  • Schedule all preventative maintenance duties, order parts, and maintain appropriate stock levels.
  • Disassemble, perform preventative maintenance, repair steels, fix water leaks.
  • Repaired and performed preventative maintenance on 3 color injection molds.
  • Perform preventative maintenance on down- hole coiled tubing tools.
  • Perform preventative maintenance on machines, tools and dies.
  • Perform preventative maintenance as required by the customer Clean Injection molds when parts become dirty.
  • Inventory control of tooling and spare parts Mechanical Inspector Surveillance and inspection of preventative maintenance activities.
  • Perform preventative maintenance on Fanuc robots, Servo weld guns, and Lincoln Electric mig welders.

Show More

8. CNC

high Demand
Here's how CNC is used in Tool Technician jobs:
  • Perform additional optical and mechanical inspection using OPTEK, Genesis software and gauges to verify CNC drill, router and scoring programs
  • Operated the UT.MA LC 25 drill bit sharpening machine and set all CNC tooling utilizing Caliper and Micrometer.
  • Executed daily operations of maintenance high speed production line, CNC operated equipment.
  • Cut tooling in the lathe and CNC mill to the current print measurements.
  • Designed CNC programs and operated tool and die machinery for injection molding.
  • Programmed and maintained CNC machines for current, new and prototype parts.
  • Use computer aided design and computer aided manufacturing CNC.
  • Intend to return to Complete CNC studies.
  • Selected over peers for CNC Programming Training.
  • Write and test programs for CNC lathes.
  • Maintain inventory levels of all CNC router, Edge bander and hand-held tools as well as many additional production floor supplies.
  • Change parameters in CNC programs as needed to fit profiles Manage tooling and insert inventory using Microsoft Office Excel spread sheets.
  • Machine troubleshooting including programming, fixturing and training on CNC lathes, CNC mills, manual lathes and mills.
  • Machine Tool Technician Troubleshoot/Maintenance/Perform PMs on CNC equipment such as lathes, mills, grinders, etc.
  • Make fixtures to CNC machines and hobs to gears Manufacturing special designs for Q.C.
  • Work with Enco CNC lathe, conventional lathe, Milling machine and Grinder.
  • Tool and die repair, ordering of tooling supplies, cnc setup.
  • Operated HAAS CNC vertical mills and Makino vertical mill.
  • Repaired, modified and built single and multicolor plastic injection molds Trained employee's in CNC programming
  • Operate CNC vertical mills (Haas) Set ups & editing Measure and record dimensions.

Show More

9. Trouble Shooting

high Demand
Here's how Trouble Shooting is used in Tool Technician jobs:
  • Trouble shooting problems in order to find the problem.
  • Trouble shooting while molds are in production.
  • Trouble shooting Coil Tubing pumps.
  • Trouble shooting Coil Tubing BOPs.
  • Trouble shooting for down services using sophisticated electronic test equipment and measuring devices.
  • Work independently repairing and trouble shooting of electrical issues on irrigation systems.

Show More

10. Set-Up

high Demand
Here's how Set-Up is used in Tool Technician jobs:
  • Tracked inventory, maintained and organized all PVC pipe tooling, supervised and performed all changeovers, including set-up and start-up.
  • Contributed to the rebuilds by preforming the set-up and operation of equipment to insure optimum performance for the customer.
  • Job Duties: Set-up reduction, planning, family grouping and projects for the screw machine department.
  • Performed own set-ups using plate, whirligig, vise, and angle plate.
  • Powdered Metal Press Set-up/Operator Cross-trained in the complete set-up and operation of all equipment including gauge set-up.
  • Forge Department Exceeded specific production and quality goals as a set-up operator.
  • Operate and set-up Lathe Optoform 80.

Show More

11. Micrometers

high Demand
Here's how Micrometers is used in Tool Technician jobs:
  • Gauged test results using various measuring tools including micrometers and microscopes.
  • Used various types of micrometers, digital VOM, temperature & pressure measuring devices to verify equipment performed as deigned.
  • Worked on and troubleshoot the press machinery using calipers, micrometers and other precision tools.
  • Used properly calibrated digital micrometers to check ODs, IDs, and depths.
  • Calibrated all micrometers and measuring tools used on production lines.
  • Used micrometers, calipers and other close tolerance measuring equipment.
  • Used digital micrometers to check for thickness at location.
  • Inspected used parts to determine changes in dimensional requirements, using rules, calipers, micrometers and other measuring instruments.
  • Utilized micrometers, verniers, microscopes, and optical comparators to perform tasks.
  • Use of hand held tools; calipers, micrometers, drills, and etc.
  • Use of micrometers, calipers, bore gages and gage blocks to ensure products are maintained to customer's prints.
  • Used calipers,micrometers, and runout gauges to check parts.
  • Use of precision instruments such as micrometers, optical comparator Multi-Skill Quality and Technical Operator.
  • Mantained ISO9100 and AS9100 standards by using micrometers, calipers, height gauges and other measuring tools.

Show More

12. TIG

high Demand
Here's how TIG is used in Tool Technician jobs:
  • Trouble shooting of presses t maintain a tight tolerance of parts being stamped.
  • Investigated issues on problem jobs or other applications that were challenging our customers.
  • Learned to use a TIG welder.)
  • Investigated accidents by interviewing employees, documented incidents and obtained pictures of the accident.
  • Investigated and analyzed daily production issues and reports.
  • Investigated and implement ideas for quality improvement, increased productivity and cost reduction.

Show More

13. Drill Press

high Demand
Here's how Drill Press is used in Tool Technician jobs:
  • Assembled new wood working power tools for sale such as industrial table saws, planers, and drill presses.
  • Operated milling machines, lathe, grinder's and drill presses.
  • Repair and ready dies for production.Use end mills lathes drill press auto and manual grinders.
  • drill presses, hobs, and grinders.
  • Operate Manual lathes, milling machines, grinders, drill presses, and hydraulic pressure brakes for part fabrication.
  • Use lathe, band-saw, mill, and/or drill press when necessary along with the 3D modeling software SolidWorks.

Show More

14. Rental Equipment

high Demand
Here's how Rental Equipment is used in Tool Technician jobs:
  • Repaired or replaced defective rental equipment parts using hand and power tools.
  • Serviced all tool and rental equipment as required per hours of usage.
  • Created a maintenance schedule for the rental equipment to ensure longevity.
  • Serviced and repaired all small and medium size rental equipment.
  • Oversee the repairs and maintenance of all rental equipment.
  • Maintained all tool rental equipment and made necessary repairs.
  • Repair and maintain all rental equipment and customer machines.
  • Diagnosed and repair broken rental equipment.
  • Tool technician/Transfer coordinator: Duties- rent, maintain, and organize rental equipment.
  • Assist Senior flow-back operators in R/U and R/D of frac/flow/rental equipment.

Show More

15. Rental Tools

average Demand
Here's how Rental Tools is used in Tool Technician jobs:
  • Repaired, serviced and maintained all rental tools.
  • repair and maintain all rental tools for customers needs.
  • repair of rental tools and equipment.
  • Maintain and repair rental tools Accomplishments Department Manager
  • Repair Rental Tools -Customer Service -Maintain all rental tools and keep service records for the equipment
  • Maintain over 300+ rental tools for a high profit rental department.

Show More

16. MIG

average Demand
Here's how MIG is used in Tool Technician jobs:
  • Utilized Plasma cutter, MIG and ARC Welder along with many other tools for fabrication.
  • Assisted in migrating all the in-house cash vaults to vendor cash vaults.
  • Skilled welder utilizing TIG, MIG and stick welding processes.
  • Reviewed and labeled Hazmat to ensure proper status and coding; i.e., HMIG.
  • man 2 years operate conventional mills-lathes, Surface grinders, Drill presses, mig welding, Performed breakdown repairs on Injection molds
  • performed mig, tig, and stick welds.

Show More

17. Machine Tools

average Demand
Here's how Machine Tools is used in Tool Technician jobs:
  • Inspected, calibrated, configured and repaired machine tools
  • Maintained and lubricated machine tools and equipment.
  • Program computers or electronic instruments, such as numerically controlled machine tools.
  • General electrical maintenance and troubleshooting on machine tools and the facility.
  • Developed Windows application for preventive maintenance of machine tools in Visual Basic.
  • Performed precision machining operations on manual machine tools.

Show More

18. Depot

average Demand
Here's how Depot is used in Tool Technician jobs:
  • Tool Technician The Home Depot South Annapolis
  • Order Picker for Home Depot Pro Desk 2008-2009 Tool Tech: 2009-2010 Renting and maintaining hardware tools.
  • Order parts for non Home Depot brand equipment through our third party logistics company, Fidelitone.
  • Traveled to local districts to set up new repair and maintenance depots.
  • Job Duties: Responsibilities include instructing and training employees and customers how to safely operate equipment furnished by Home Depot.
  • Outperformed other Home Depot locations by keeping a neat, well organized tool repair room.

Show More

19. Surface Grinders

average Demand
Here's how Surface Grinders is used in Tool Technician jobs:
  • Mill, Lathe, Surface Grinders, Journeyman Saws, Plasma Cutter, minor electrical.
  • Make repair parts by welding and machining with lathes, mills and surface grinders.
  • General manual machining practices using lathes, mills and surface grinders.
  • Interpreted specifications and blueprints, set up/operated precision surface grinders.
  • Experienced making parts on conventional machines such as lathes, milling machines, surface grinders, cylindrical grinders and honing machines.
  • Train new hires in the proper operation of Mills, Lathes, Surface Grinders and Drill Presses.

Show More

20. Inventory Control

average Demand
Here's how Inventory Control is used in Tool Technician jobs:
  • Manage unscheduled maintenance projects and oversee inventory control.
  • Performed inventory control on all CNC tooling, fixtures, and electrical supplies used in the support of production operations.
  • Developed inventory controls for 30 land mobile radio's (LMR) maintained 100% control of communication equipment.
  • Support, implement and practice good inventory control practices: FIFO, lean manufacturing.
  • Inventory control of outgoing and incoming tooling for prior jobs according to scheduling.
  • Stand in for Inventory Control Manager & Asset Manager during their absence.
  • Operated forklift and order picker to complete down stocking and inventory control.
  • Created and maintained inventory control and inspection records for product assembly tools.
  • Job includes knowledge of POS system and responsibility for inventory control.
  • Maintained inventory control and product count on a weekly basis.
  • Maintained inventory control for all damage and non damaged tools.

Show More

21. Production Equipment

average Demand
Here's how Production Equipment is used in Tool Technician jobs:
  • Preformed and assisted maintenance with repairs to production equipment.
  • Programmed PLC controlled Production equipment on Injection Plastic Machinery.
  • Maintain and repair all running injection molds and assisting maintenance department in keeping production equipment and presses in working order.
  • Diagnose and repair problems electrical or mechanical to electrical, pneumatic, hydraulic, steam among others production equipment.
  • Set up, Maintain, and Calibrate production equipment; including Crimping machines, Punch Press, Wire Strippers.
  • Maintain & repair hydraulic and pneumatic portions of robotic and manual production equipment, jigs and fixtures.
  • Created new tools, fixtures, and jigs for production equipment.

Show More

22. Small Engines

average Demand
Here's how Small Engines is used in Tool Technician jobs:
  • Diagnose, evaluate, and repair power tool equipment and small engines.
  • Diagnose and repair small engines.
  • Tool Tech-Evaluation and repair of small engines, outdoor power equipment and handheld electrical devices.

Show More

23. Machine Shop

average Demand
Here's how Machine Shop is used in Tool Technician jobs:
  • Work closely with engineering and machine shop to make sure blueprints and tooling was up to date with the manufacturing areas.
  • Selected, aligned and secured holding fixtures, cutting tools, attachments, accessories and materials on necessary machine shop tooling.
  • Purchased, calibrated, and maintain measuring equipment for pattern and machine shop.
  • Operate lathe, surface grinder, drill press and various machine shop equipment.
  • Interact with machine shop for machine work.
  • Machine shop maintenance and inventory.
  • Place orders for new tooling and worked with machine shops to get new tools made and delivered in a timely manner.
  • Route 2 Box 80 Meadowbrook, WV [ ] Working in machine shop as a tool technician.

Show More

24. Assembly Line

average Demand
Here's how Assembly Line is used in Tool Technician jobs:
  • Calibrate, repair, assembly line tools for efficient production, reducing downtime by 40%.
  • Performed various assembly line duties (drilling holes, shooting rivets, countersinking).
  • Cleaned, setup and repaired parts for the machine operator on the assembly line.
  • Assist with maintaining assembly line tooling to produce quality parts increasing.
  • Repair and maintenance of assembly line tooling.
  • Put together doors on an assembly line and get them ready to press so glue can hold together

Show More

25. Proper USE

average Demand
Here's how Proper USE is used in Tool Technician jobs:
  • Assist customers with general tool rental questions, demonstrating the proper use of rental tools and processing transactions.
  • Explained proper use and operation of equipment to other staff members as well as to customers.
  • Assisted customers by phone and in person with instruction and proper use of equipment.
  • Demonstrated the proper use and safety requirements for the equipment to the customers.
  • Train and instruct customers on the safe and proper use of equipment.
  • Assist customers with proper use of tools.
  • Instructed and trained personnel as required on proper use of production tools and gages.

Show More

26. EDM

average Demand
Here's how EDM is used in Tool Technician jobs:
  • Build wax injection molds Build fixtures and gages Design molds, fixtures, gages Solid Works-Cam Works EDM sinker
  • Relocated wire EDM CNC equipment to a controlled manufacturing environment.
  • Performed all around functions including draw polishing, electrode making using carbon/ graphite for EDM operations, pattern making for duplication.
  • Trained in CNC turning & milling, EDM - conventional & wire, and AutoCAD, Heat treating, Quality Control.
  • Worked with product design and engineering to build tooling from part prints using CNC mill and wire EDM.
  • Fabricated molds to tech drawings utilizing CNC and Manual machining centers as well as Plunge style EDM machines.

Show More

27. Halliburton

average Demand
Here's how Halliburton is used in Tool Technician jobs:
  • Job Description- Build open hole completion jobs per Halliburton Management Systems process in accordance with Health Safety Environment policies.
  • Served as the Halliburton Camp Steering Committee Head during first year in Grand Junction.
  • Acquired Halliburton and Pratt & Whitney as new customers in 2008.
  • Performed preventive/predictive maintenance procedures on Halliburton equipment.
  • Worked on all of Halliburton pump maintenance, changes cracked or washed out fluidends pressure tested to 10,000 psi
  • Worked at Halliburton thru the agency.

Show More

28. Test Procedures

average Demand
Here's how Test Procedures is used in Tool Technician jobs:
  • Perform test procedures and reading/interpreting schematics down to component level by applying technical expertise for highest quality and accurate results.
  • Involved with adaptation and design of complex test equipment and development of related test procedures and documentation.
  • Conducted power checking test procedures and equipment to verify electrical and mechanical integrity of units assembled.
  • Developed and reviewed test procedures and test reports, interpreting customer and industry specifications.
  • Confer with engineering personnel regarding details and implications of test procedures and results.
  • Develop and submit specific test procedures by extracting technical data from existing specifications.

Show More

29. Order Parts

average Demand
Here's how Order Parts is used in Tool Technician jobs:
  • Search parts breakdown and internet to order parts needed for repair and handle paperwork for incomplete and completed work orders.
  • Order parts, maintain inventory, assist customers with pick up and drop off of equipment to be repaired.
  • Tool Room Tech, check equipment in & out, clean and repair equipment, Order parts & equipment.
  • Diagnose and repair customer owned tools, order parts as needed and maintain inventory.
  • Estimate, pulled or order parts, repaired and tested tools.
  • Order parts for repair, using a computer to process transactions.
  • Order parts and materials as needed to complete my task.
  • Monitor parts inventory and order parts as needed.
  • Order parts & maintain part inventory.
  • Repair customer tools in a timely fashion, create and close out work orders, order parts for tools.
  • Repair, service tools and equipment when operating improperly, order parts and replacing onsite.
  • Receive and stock parts and products Contacted companies and order parts and products as needed.

Show More

30. Osha

low Demand
Here's how Osha is used in Tool Technician jobs:
  • Comply with all company Environmental, Health and Safety programs, OSHA regulations, manufacturer recommendations, and industry standard guidelines.
  • Scheduled safety checks on department tools keeping up with OSHA rules and regulations.
  • Learned OSHA standards and kept the shop current on OSHA standards.
  • Work safely and watching others for dangerous situation, OSHA standards.
  • Certify chain slings to OSHA standards.
  • Ensured all recyclable material was in order and shipped off accordingly to OSHA standards.
  • Assembled and disassembled down hole tools certifications Well Control Expires 8/15, Rig Pass, OSHA Core Training

Show More

31. Rental Contracts

low Demand
Here's how Rental Contracts is used in Tool Technician jobs:
  • Use a computer to make out rental contracts.
  • Reduced amount of markdowns on rental contracts.
  • Build tool rental contracts.- Clean and repair returned rental equipment.
  • Tool Rental, sold out tool rental contracts for customers using the company tools as a rental
  • Created customer relationships with creating rental contracts in a timely and friendly manner.
  • Created, closed and maintained rental contracts for contractors and DIY customers.

Show More

32. Surface Equipment

low Demand
Here's how Surface Equipment is used in Tool Technician jobs:
  • Performed maintenance and inspection of surface equipment.
  • Performed pressure testing on packers, setting tools, sub-surface valves, bypasses, tubing testers, surface equipment.
  • Performed maintenance functions such as repairs on down-hole tools and surface equipment.
  • Performed assembly, disassembly, maintenance and repairs on down-hole tools, surface equipment and other oil production equipment.

Show More

33. Heavy Equipment

low Demand
Here's how Heavy Equipment is used in Tool Technician jobs:
  • Operated fork lifts, man lifts, and other heavy equipment as needed.
  • Advised and instructed customers with use of tools, especially heavy equipment.
  • Worked with heavy equipment as well as heavy lifting.
  • Diagnosed problems and made repairs to heavy equipments.
  • Serviced and delivered heavy equipment (excavators, loaders, rollers, etc.
  • Perform rigging operations of heavy equipment, electrical maintenance and operation of special ordnance test equipment and weapons handling/lifting equipment.

Show More

34. PLC

low Demand
Here's how PLC is used in Tool Technician jobs:
  • Maintaned PLC controlled glue machines.
  • Implemented PLC programming and troubleshooting procedures while also initiating and executing process improvements and conducting parts research when necessary.
  • Worked in the field diagnosing and repairing packaging equipment ranging from simple machinery to sophisticated microprocessor/PLC controlled equipment.
  • Repair Electrical/Electronic PLC controlled systems on paper/tissue machinery systems.
  • Performed PLC troubleshooting on automated equipment.
  • Install, calibrate and maintain automatic control valves, vibration monitors, PLC controllers, DCS controllers and relay logic troubleshooting.

Show More

35. Air Compressors

low Demand
Here's how Air Compressors is used in Tool Technician jobs:
  • Repaired electric and power tools including rotary hammers, nail guns, band saws and air compressors.
  • Maintained industrial air compressors oil, filter changes etc.
  • Maintained air compressors, saws, sanders, pneumatic nailer, hydraulic driven toolsand equipment.
  • Used electric tools, skill saw, air compressors, and pressure washers.
  • Install generators, welders and air compressors.
  • Operated pneumatic tools and air compressors.

Show More

36. ISO

low Demand
Here's how ISO is used in Tool Technician jobs:
  • Recorded discrepancies or damages to incoming parts and notified applicable vendor, supervisor and/or purchasing department.
  • General upkeep and maintenance for isolation tools are constantly performed.
  • Assisted the Tooling Supervisor in training and supervising the draw bench operators to run more efficiently, safely, and productively.
  • Corrected the print and worked with design to get prints to meet FDA and ISO 11485 standards.
  • Helped shift supervisors when needed for emergency tool repairs to reduce down time to a minimum.
  • Created written pass-downs via e-mail; sent to all shift Supervisors as well as plant managers.
  • Perform all duties as designated by supervisor/manager and/or by the job position description.
  • Relayed counts and any problems to the next shift lead and production supervisor.
  • Completed an ISO 9001 Auditor Class to be a Certified ISO Auditor.
  • Helped to create a productive team and timely advancement through ISO standards.
  • Drive and operate crane truck when needed for isolation tool jobs.
  • Completed any other tasks as assigned by Supervisor-Spares or Lead Spares.
  • Work independently and efficiently, act as my own supervisor.
  • Work as lead tech on offshore projects under my supervisor.
  • Assisted the supervisors and press operators with ink prep.
  • Perform appointed activities to comply with QS9000 and ISO14000.
  • Initiated corrective actions with Supervisors, Managers and Engineers.
  • Isolated LNP troubles utilizing SS7 traces/traps Debug scripts.
  • Generate records digitally on computer and manually spreadsheets in Excel for ISO requirements.
  • Tear down, test, and rebuild Valves, Isolation Tools, and Frac Heads

Show More

37. Customer Tools

low Demand
Here's how Customer Tools is used in Tool Technician jobs:
  • Maintained and serviced electric and gas powered equipment of the tool rental fleet and customer tools they brought in for repair.
  • Diagnose tool repairs for customer tools and store owned tools.

Show More

38. Pressure Test

low Demand
Here's how Pressure Test is used in Tool Technician jobs:
  • Perform pressure tests in order to ensure functionality of tools and prepare float equipment to be sent out with running tools.
  • Tool Tech * Built offshore production tools * Pressure test offshore production tools
  • Perform torque and pressure testing of various components.
  • Assemble and disassemble downhole tools and pressure test them.
  • Repair and rebuild fracking pipes and valves Performs pressure test and magnetic pratical inspect all equipment related to oil field

Show More

39. Spare Parts

low Demand
Here's how Spare Parts is used in Tool Technician jobs:
  • Order spare parts for tool room equipment and all tooling.
  • Maintain spare parts inventory for all molds and tooling.
  • Managed Mold spare parts budget.
  • Spare parts production and metrology.
  • Maintained inventory of spare parts diagnosed and debugged problems with production equipment.
  • Fabricate spare parts for progressive tooling, general maintenance machinist

Show More

40. SQL

low Demand
Here's how SQL is used in Tool Technician jobs:
  • Consulted with the SQL Administrators to customize their database, replicate between the distributors throughout the country.
  • Developed T-SQL stored procedures to convert vendors XML files to deposit files.
  • Worked with SQL Server, Active Directory, VMware 3.5, Windows Server 2003 and 2008, SharePoint and IIS.
  • Run basic SQL queries for hotfixes, etc.
  • Implemented SSIS packages to update SQL data tables from Oracle Server.

Show More

41. ROV

low Demand
Here's how ROV is used in Tool Technician jobs:
  • Provided daily professional customer service to contractors and regular customers to keep service ratings high.
  • Provided maintenance and repairs on machining, robotics, welding and other manufacturing/fabricating equipment.
  • Provided program management for the review, reallocation and reordering of system generated requisitions.
  • Assisted in evaluations and recommendations for improvements on equipment based on maintenance history.
  • Developed relationships with customers and become their preferred Technology Integration from solutions provider.
  • Developed a reputation as an efficient service provider with high levels of accuracy.
  • Align appropriate technicians with job requirements and provide additional assistance when needed.
  • Conduct training sessions for improvement techniques and facilitate quality improvement teams.
  • Provided input and Interfaced with engineering for tooling and process improvement.
  • Implemented process improvement measures to make commonly used items more accessible.
  • Provided assistance to customers in equipment, operations and procedures.
  • Positioned staff performance improvement by establishing training program for facility.
  • Ensured home improvement equipment integrity and in timely repair.
  • Provided ongoing research on product improvement and tool innovations.
  • Inspected and approved tools per production quality requirements.
  • Provide all required information to production departments.
  • Implemented production and quality improvements.
  • Provided excellent customer service and educated customers on how to use tools and machines for garden maintenance and general contractor work.
  • Provided site wide tooling support within the Tool Crib to the machine and weld shops, warehouse, and assembly departments.
  • Provide assistance to all other levels of technicians during maintenance functions such as repairs, assembles, & disassemble of equipment.

Show More

42. Autocad

low Demand
Here's how Autocad is used in Tool Technician jobs:
  • Tool assembly design, repair, and assembly drawing creation using AutoCAD.
  • Used AutoCAD and MS Access to maintain processes and process prints.
  • Used AutoCAD for design of tools.
  • Make and design prototype tools and fixtures with Autocad and Mastercam X6.
  • Make and design prototype tools and fixtures with Autocad Draftsight Mastrercam and Solid Works.
  • Volunteered to train new and senior employees on machines and AutoCad.

Show More

43. Overhead Cranes

low Demand
Here's how Overhead Cranes is used in Tool Technician jobs:
  • Used forklifts, overhead cranes, jib cranes and toque masters.
  • Lead operator of various equipment to include overhead cranes.
  • Used overhead cranes extensively in mold assembly/disassembly and flipping molds.
  • Licensed operator of mobile equipment and overhead cranes.
  • Operated forklifts, overhead cranes, and hand operated lifts to move parts and equipment and maintained a forklift operator certification.
  • Operated heavy equipment including forklift, man lift, scissor lift, front-end Loader, and overhead cranes.

Show More

44. New Tools

low Demand
Here's how New Tools is used in Tool Technician jobs:
  • Debug and develop new tools to reach production ready status, and work closely with engineers to accomplish changes needed.
  • Put into effect a new maintenance log to ensure product success each time new tools were set up.
  • Develop and design new tools and dies, using computer-aided design software.
  • Collaborated with various design teams to research, develop, and build new tools.
  • Perform a first article inspection on new tools or products.
  • Develop and design new tools and dies, using computer-aided design software.

Show More

45. CMM

low Demand
Here's how CMM is used in Tool Technician jobs:
  • Gained experiences in robotics, machining, CMM, and global positioning of components on automotive frames.
  • Operate CNC Machines Running computerized Zoller programs for measuring tools Reset and repair tooling Running CMM programs on Browning Sharp measuring device
  • Performed all phases of die build process including die machining, die construction, die tryout, layout and CMM inspection.
  • Tool, Die and Gage Maker and calibration and production part inspector including first piece, GD&T and CMM.
  • Coordinated with CMM, Machining and Graphics departments to engineer and manufacture spare 2D and 3D details for metal stamping dies.
  • Worked in CMM, metal lab, pattern shop, tryout and new build departments.

Show More

46. R

low Demand
Here's how R is used in Tool Technician jobs:
  • Produced a training curriculum for completion tools engineering trainees and mentored engineering new hires during their development.
  • Generated training curriculum and presented to field and/or engineering personnel to affect any changes identified above.
  • Coordinated the arrangement of scheduled preventive maintenance within the department to minimize process interruption.
  • Experience constructing messages in accordance with specification to various controllers communicating on the data-link.
  • Conducted various weekly tasks to avoid extensive downtime with high-tech semi-conductor processing tools.
  • Developed a mentoring program whereby engineers mentored engineering trainees in their development.
  • Inventory management proficiency implementing the companies AS400 system to track component usage.
  • Delivered additional items to different locations at similar but different towers.
  • Maintain tools in excellent operating condition, working safely and effectively.
  • Developed communication specification in support of aftermarket scan tool vendors.
  • Performed peer reviews/validation of software developed by fellow team members.
  • Administered appropriate paperwork and signatures for business deliveries.
  • Debugged/repaired/programmed ADC microprocessor based commercial dryers & centrifuges.
  • Recorded product and packaging information on specified forms.
  • Included detailed documentation of processes and procedures.
  • Maintained accurate inspection reports and trailer inventory.
  • Preformed daily safety and operation functions.
  • Lead meetings with heads of teams to share knowledge on new technologies we have and address any concerns they may have.
  • Repair and rebuild defective mechanical parts in electric motors, generators, and related equipment, using hand and power tools.
  • Performed maintenance and repairs on conventional tools, down-hole tools and other equipment used in the application for down-hole operations.

Show More

47. Computer System

low Demand
Here's how Computer System is used in Tool Technician jobs:
  • Assemble and establish computer systems and network connections related to eddy current and ultra-sonic testing.
  • Helped with technical support of desktop computers, applications and other related technology that includes testing and installation of computer systems.
  • Maintain company computer systems Repair small copiers and fax machines Troubleshoot and repair electronic file systems SQL Database configuration
  • Performed necessary research on internal computer systems and ordered documents and transcripts pertinent to the classified issues.
  • Document painting & blasting treatment and maintenance actions on military equipment using manual or commercial computer systems.
  • Included are multiple on-line network systems, auxiliary consoles and peripheral equipment on electronic computer systems.

Show More

48. Engineering Changes

low Demand
Here's how Engineering Changes is used in Tool Technician jobs:
  • Performed engineering changes and PMs as well as responsibility for maintenance and for this blow molding industry.
  • Maintain molds and machineryPerform engineering changes to tool and dye molds
  • Mapped tooling components to provide data for engineering changes and drawings, reversed engineered components when necessary.
  • Repaired and modified machinery per engineering changes.
  • Implement engineering changes as necessary.
  • Performed engineering changes, mold modifications; troubleshoot the injection process and support day-to-day operations along with mold repairs.

Show More

49. Electric Tools

low Demand
Here's how Electric Tools is used in Tool Technician jobs:
  • Diagnose and repair pneumatic/electric tools.
  • Diagnosed, repaired and maintained gasoline and electric tools.
  • Trained and certified on Milwaukee electric tools.
  • Diagnose & Repair Air & Electric Tools
  • Inventory tool sets Inspect and test air, hydraulic and electric tools.
  • Repaired all customers small engine two an four stroke an hand held electric tools an just about anything that came along .

Show More

50. Electrical Systems

low Demand
Here's how Electrical Systems is used in Tool Technician jobs:
  • Overhaul, repair, assembly, troubleshooting and testing turbo machinery products incorporating mechanical, hydraulic, pneumatic and electrical systems.
  • Performed all aspects of automotive and light truck mechanical service and repair including complex diagnostics of computer and electrical systems.
  • Perform maintenance of vehicles including repairing engine failures; repairing mechanical and electrical systems malfunctions; replacing parts and components.
  • Performed planned and unplanned maintenance on aviation ground support equipment including mechanical, hydraulic, pneumatic, and electrical systems.
  • Ensured safety to residents and other employees by making professional electrical wiring and other repairs to electrical systems.
  • Preform unscheduled, and preventative maintenance on various instrumentation and electrical systems on hydraulic fracturing equipment.

Show More

20 Most Common Skill for a Tool Technician

Rental Department20%
Plastic Parts11.1%
Safety Awareness8.5%
Lathe Machines7.6%
Hand Tools7.6%
Customer Service7%
Preventative Maintenance6.6%
CNC5.7%

Typical Skill-Sets Required For A Tool Technician

RankSkillPercentage of ResumesPercentage
1
1
Rental Department
Rental Department
15.7%
15.7%
2
2
Plastic Parts
Plastic Parts
8.7%
8.7%
3
3
Safety Awareness
Safety Awareness
6.6%
6.6%
4
4
Lathe Machines
Lathe Machines
6%
6%
5
5
Hand Tools
Hand Tools
6%
6%
6
6
Customer Service
Customer Service
5.5%
5.5%
7
7
Preventative Maintenance
Preventative Maintenance
5.2%
5.2%
8
8
CNC
CNC
4.5%
4.5%
9
9
Trouble Shooting
Trouble Shooting
2.8%
2.8%
10
10
Set-Up
Set-Up
2.3%
2.3%
11
11
Micrometers
Micrometers
2.2%
2.2%
12
12
TIG
TIG
1.8%
1.8%
13
13
Drill Press
Drill Press
1.6%
1.6%
14
14
Rental Equipment
Rental Equipment
1.6%
1.6%
15
15
Rental Tools
Rental Tools
1.5%
1.5%
16
16
MIG
MIG
1.5%
1.5%
17
17
Machine Tools
Machine Tools
1.4%
1.4%
18
18
Depot
Depot
1.3%
1.3%
19
19
Surface Grinders
Surface Grinders
1.2%
1.2%
20
20
Inventory Control
Inventory Control
1.2%
1.2%
21
21
Production Equipment
Production Equipment
1.1%
1.1%
22
22
Small Engines
Small Engines
1.1%
1.1%
23
23
Machine Shop
Machine Shop
1.1%
1.1%
24
24
Assembly Line
Assembly Line
1%
1%
25
25
Proper USE
Proper USE
1%
1%
26
26
EDM
EDM
0.9%
0.9%
27
27
Halliburton
Halliburton
0.9%
0.9%
28
28
Test Procedures
Test Procedures
0.9%
0.9%
29
29
Order Parts
Order Parts
0.9%
0.9%
30
30
Osha
Osha
0.8%
0.8%
31
31
Rental Contracts
Rental Contracts
0.8%
0.8%
32
32
Surface Equipment
Surface Equipment
0.7%
0.7%
33
33
Heavy Equipment
Heavy Equipment
0.7%
0.7%
34
34
PLC
PLC
0.7%
0.7%
35
35
Air Compressors
Air Compressors
0.7%
0.7%
36
36
ISO
ISO
0.6%
0.6%
37
37
Customer Tools
Customer Tools
0.6%
0.6%
38
38
Pressure Test
Pressure Test
0.6%
0.6%
39
39
Spare Parts
Spare Parts
0.6%
0.6%
40
40
SQL
SQL
0.6%
0.6%
41
41
ROV
ROV
0.6%
0.6%
42
42
Autocad
Autocad
0.6%
0.6%
43
43
Overhead Cranes
Overhead Cranes
0.5%
0.5%
44
44
New Tools
New Tools
0.5%
0.5%
45
45
CMM
CMM
0.5%
0.5%
46
46
R
R
0.5%
0.5%
47
47
Computer System
Computer System
0.5%
0.5%
48
48
Engineering Changes
Engineering Changes
0.5%
0.5%
49
49
Electric Tools
Electric Tools
0.5%
0.5%
50
50
Electrical Systems
Electrical Systems
0.5%
0.5%

23,664 Tool Technician Jobs

Where do you want to work?