Manufacturing Technician jobs at Tosoh Quartz - 84 jobs

Purpose Accountable for basic operation of the site's quality assurance and control program including but not limited to: assisting and supporting all safety, environmental and quality regulations, product testing and adherence to standards, targets and recipes, maintain relevant equipment and calibrations, and decision-making through basic statistical understanding. Key Responsibilities Perform all work in accordance with safety rules and regulations and participate in facility health & safety activities as assigned Use descriptive statistics to identify non-conforming material to site referenced standards and targets Ensure all relevant quality requirements are consistently met according to the QA manual and plant SOPs Ensure that non-conforming product is appropriately quarantined, identified and segregated according to standard procedures Ensure the communication of non-conformance is clear and concise to required parties. Disposition basic non-conforming product as allowed by site Technical Manager. Record testing and inspection results by inputting into appropriate database or spreadsheets while identifying and responding to test results outside of product standards and targets Verify that all product packaging and appearance standards meet site and client expectations. Generate and analyze reports and charts Monitor and document process parameter changes as assigned Communicate test results and observations to operations and management to maintain process and product conformance Monitor and record consumption and inventory of raw materials (wax, resin, etc.). Verify quality of raw materials as required Support preventive and unscheduled maintenance tasks. Assist in process and product tests/trials. Be pro-active in identifying and performing other tasks to maintain and improve safety, quality and environmental performance Demonstrate adherence to process and product SOPs, JSAs, check sheets and other QMS documentation Provide support to team members when a quality issue arises Demonstrate drive and willingness to advance to higher levels of responsibility Perform in a relief capacity for production coordinator Perform other duties as assigned Models company core values Other duties as assigned Required Qualifications Associate's Degree and two years of experience in laboratory work, quality control, or general manufacturing; or an equivalent combination of training, education, and experience Knowledge of and ability to follow all quality and process standards Demonstrated ability to operate a computer and supporting software, to include spreadsheet and statistical packages Working knowledge of manufacturing equipment and production processes Demonstrated ability to operate sample preparation and testing equipment Knowledge of inventory management Excellent verbal and written communication as well as interpersonal skills Proficient math skills and statistical knowledge, including concepts Demonstrated ability to operate a variety of material handling equipment (both hand tools and electrical/motorized equipment) Ability to climb stairs and lift up to 50 pounds Demonstrated ability to work while wearing a respirator and/or other safety clothing or equipment Preferred Qualifications Associate degree in Forest Products, Engineering, Wood Science or related scientific field preferred Three (3) years plywood, composite, or engineered wood manufacturing experience About Roseburg Forest Products Founded in 1936, Roseburg Forest Products is a privately held company based in Springfield, Oregon. With a legacy in sustainable forestry and innovative wood products manufacturing, we are a leading North American producer of engineered wood, exterior trim, plywood, lumber, and medium density fiberboard (MDF). Our products shape and support homes, workplaces, and industries, while our timberlands protect forest health for future generations and provide high-quality wood fiber for our integrated operations. At Roseburg, we believe in making lives better from the ground up through the products we create, the relationships we build, and the communities we support. Our team of passionate professionals value safety, integrity, and excellence in all we do. From the mill to the forest to the office, you'll find opportunities to grow and contribute to a company that cares for people, communities, and the environment. Learn more about who we are and what we do at ***************** Benefits at Roseburg Roseburg offers a comprehensive and competitive benefits package to support the health, financial security, and well-being of our team members and their families. Key benefits include: Bonus opportunities based on company and individual performance 401(k) with up to 4% company match and 3% automatic company contribution Vacation starting at 3 weeks and 11 paid holidays per year Company-sponsored medical, dental, and vision insurance Company-paid life, AD&D, and long-term disability insurance options Mental health benefits for the entire family, including 8 free annual sessions per person Wellness programs and incentives, including biometric screenings & wellness challenges Paid time away from work for illness or injury, as well as paid parental bonding time Health Savings Account (HSA) with company contributions and Flexible Spending Account (FSA) options Company match for charitable contributions Education assistance and professional development support Financial and retirement counseling Additional voluntary benefits including pet insurance, student loan refinancing, and exclusive scholarships for child dependents, and more! AN EQUAL OPPORTUNITY EMPLOYER INCLUDING DISABILITY AND VETERANS

Wish your job made a difference? Our mission is protecting the world's water. We work every day to support the sustainability of our most precious resource, so our people know what they're doing matters. Join our team and do work that matters. Visit ******************* to learn more or check out the official job description (below). Company Description: Orenco Systems, Inc. (subsidiary of Infiltrator Water Technologies) is a manufacturer of innovative onsite and decentralized wastewater collection and treatment technologies. Solutions include community collection systems, advanced secondary treatment systems, watertight fiberglass tanks, and in-tank pumping and filtration systems. Orenco also manufacture high-quality standard, custom, and OEM controls, along with state-of-the-art fiberglass buildings, tanks, and enclosures. Infiltrator Water Technologies is a market leader within the onsite wastewater treatment industry, Infiltrator manufactures a variety of revolutionary products and innovative, environmentally friendly alternatives to traditional stone and pipe leachfield and concrete septic wastewater system components. We sell our products through wholesale distribution across the United States and Canada for use on properties with onsite wastewater treatment systems. Apply through Express Professionals at: ********************************************** Internal applicants apply through Orenco's internal job board at: ********************************************* GENERAL POSITION SMMARY: This is an entry to intermediate level position that exists to produce Orenco products. A successful OMT (Orenco Manufacturing Tech) will move with a sense of purpose and urgency from task to task, be cooperative, demonstrate drive/self-motivation, stay positive in the face of difficulties, make good use of work time, work well with other team members, and retain information. ESSENTIAL FUNCTIONS & KRA: > Safety/Culture Continuously maintains Orenco Management's safety, cultural, and professional standards. Promotes, encourages, and reinforces a positive safety culture, safe practices, and a safe work environment to all employees. Loads or fills molds with appropriate raw materials, pays attention to detail. Reads production drawings and assembles various subcomponents into finished products using epoxies, glues, resins, screws, nuts, and bolts. Trims, sands, grinds, drills, and/or routers fiberglass parts into accurate finished products. Recognizes part defects and makes appropriate repairs. Uses PPE (personal protective equipment) in the correct manner and performs proper chemical storage and labeling. Follows all safety rules diligently. Uses power tools in a safe manner, maintains equipment, and cleans work area on a daily basis. Pays close attention to detail when completing any task. Follows SOP's (standard operating procedure) and MOP's (machine operating procedure) in all areas. Uses tablet and computer to enter and retrieve data. Keeps Lead Technician and Supervisor informed of any material, equipment, safety, or quality issues. Reads and interprets work orders, completing projects in preparation for shipment using manufacturing drawings and established SOP's. Sets up and uses various jigs and fixtures. Boxes, packages, and labels various finished products in preparation for shipment. Empties shop trash cans and cardboard bins. Operates the cardboard compacter when needed. Work to be done during manufacturing business hours, which may include an occasional early and/or later shift as needed. Occasional overtime may be required. Regular, consistent, and predictable attendance is required. Performs other duties as assigned in any area assigned. > Systems Production Cuts various lengths of PVC, Polyethylene, and ABS (Acrylonitrile- Butadiene-Styrene) pipe, tubing, sheets, and Polyester filter fabric in the manufacture of various components and finished products. Drills, saws, grinds, sands, sews, and welds fiberglass, PVC, ABS, and Polyethylene pipe, tubing, sheets, miscellaneous fittings, components, and Polyester filter fabric. Dispenses and applies methacrylate adhesive, superglue, and various PVC cements in the manufacture of various components and finished products. Grinds, trims, and reams other finished products in preparation for shipment. EDUCATION: No minimum required KNOWLEDGE/SKILLS/EXPERIENCE: Less than one year of experience in Orenco Manufacturing shops. Completion of the two-hour Emergency Response & HW (HazWopper) Training, and annual follow up training is required. Training description: Emergency communication, alarms, and evacuation routes, contingency plan implementation/emergency response procedures, emergency equipment use. Hazardous waste management - handling and storage rules. Good communication and team building skills. Ability to be flexible and adjust to priority changes with little notice and to remain calm during confrontational or high-pressure situations. Ability to use sound judgement and follow-through in problem-solving and decision-making processes. Ability to follow instructions, work quickly, efficiently, independently, and as a team member. Ability to use and read a tape measure. Ability to prioritize, schedule, and perform multiple tasks to make efficient use of available time. Effectively communicates mechanical and/or electrical problems as well as part quality issues with Lead Techs, Maintenance Techs, Product Development and Engineering staff. Consistently meets production standards. Keeps work area clean and free of safety hazards. Attends and participates in team meetings. Is familiar with and able to follow approved safe handling and storage procedures for various composite chemicals. Distinguishes differences in materials of similar type, look, and feel. Basic math skills with the ability to use a calculator. Basic computer ability. Ability to be trained and safely operate various power tools and other equipment. Effectively communicates safety issues and concerns. Avoids disruptive behaviors that negatively impact the team. TOOLS & EQUIPMENT Adhesive Sprayers All Shop Saws Allen Wrenches Anver Lifts Battery Operated Punch Broom Caulk Gun Chalk Lines Chemical Dispensing Equipment Chop Saw Circular Saw Clamps CNC Router Crimping Tool Cup Gun Digital Caliper Drill Drill Press Fixtures Forklift Grinders Hammer Hand Bander Hand Buffer Hand Router Hand Tools Hand Truck Heat Gun Hose Cutter Infusion Molds Jig Saw Jigs Ladder Level Lifts Load Turners Molds Overhead Crane Paint Gun Pallet Jack Plumbing Hardware Pneumatic Grinder Pneumatic Sander Pneumatic Tools Power Washer Printer Razor Knife Resin Pump Router Sanders Scanner Scissors Sewing Machine Sheeter Shovel Table Saw Tablet Tape Measure Ultrasonic Welder Vise May be required to operate a pallet jack and/or standup forklift, both require certification prior to authorization to operate. Apply through Express Professionals at: ********************************************** Internal applicants apply through Orenco's internal job board at: ********************************************* WORKING CONDITIONS: Indoor/outdoor production environment involving exposure to chemicals and dust. Some tasks may be performed in Alternate Entry or true Confined Spaces. Respirators may be required for most jobs and are required for certain, very specific job duties within the class. Employee must be medically certified and receive proper fit testing and training before use. Protective equipment such as Tyvek suits, dust masks, ear protection, and gloves are provided. Forced air hoods are not required but are available for use in the grinding area upon request. These do not require a medical evaluation or fit testing but do require a one time training on use and maintenance. PHYSICAL REQUIREMENTS: Seeing, speaking, hearing, reaching, pushing, pulling, grasping, holding, repetitive use of hands, twisting, squatting, bending, stooping, climbing stairs and ladders, and long periods of standing and walking on concrete floors. Regular job duties require frequent unassisted lifting of 20-50 lbs. and occasionally up to 70lbs. Lifting over 70 lbs. must be assisted.

Description Who We Are At nLIGHT, we are constantly on the cutting-edge of laser technology in a massively growing market. We are a leading provider of high-power semiconductors and fiber lasers for industrial, microfabrication, and aerospace & defense applications, to name a few. Our lasers are changing not only the way things are made, but also changing the things that can be made. Headquartered in Camas, Washington, nLIGHT is a publicly listed company (NASDAQ: LASR). Produce high-powered fiber lasers and components as part of a manufacturing team. No experience required. Receive Manufacturing Specialist on-the-job training to perform hands-on production tasks, including electromechanical assembly. nLIGHT offers competitive wages, excellent benefits, and progression increases as you gain experience and develop your skills. Day Shift: Monday - Friday | 6A-2:30P Swing Shift: Monday - Friday | 2P-10:30P RESPONSIBILITIES Learns and performs electromechanical assembly operations. Uses manual and electronic tools for assembly. Enters production data into computer-based system. Contributes as a valued team member. Performs various production tasks while working in a clean room environment, wearing clean room garments. Duties may include using a microscope and handling solvents. Engages in production activities according to the documented work instructions and standards. Identifies and reports any irregularities which are not complaint with work instructions. Ensures work is completed in a safe manner and complies with all safety and quality standards. Checks equipment regularly to ensure normal operating activity. May engage in basic troubleshooting. Qualifications Experience in electronic assembly is preferred but not required. Soldering and/or wire bonding experience is a plus. Ability to work in a team-oriented production environment. Demonstrated proficiencies in basic computer skills to perform data entry. Demonstrated problem solving abilities. Ability to adapt to changing priorities, meet deadlines and work well under pressure. Good communication skills. Committed to working safely. Ability and willingness to follow to all rules and regulations, including safety, attendance, breaks etc. as established by management. Ability to communicate and follow English written and verbal instructions. Basic math skills, including: addition, subtraction, and multiplication in order to process inventory, counting, time allocation, and work hours. Good attention to detail Ability to work overtime as needed to meet team and company goals. Work Environment: Must be able to function well in an cleanroom environment. Must be able to perform in cleanroom wearing cleanroom garments. Must be able to work in a controlled chemical environment. Physical Requirements: Ability to work assigned shift with or without a reasonable accommodation. Must be dependable and reliable. Ability to sit/stand/walk for 8-hour shift & lift up to 35 pounds with or without a reasonable accommodation. Ability to frequently use hands for the repetitive actions of simple and firm grasping and fine attention to detail. nLIGHT is proud to offer comprehensive COMPENSATION AND BENEFITS: Starting pay depends on qualifications: Manufacturing Specialist I - starts $18.73 per hour Manufacturing Specialist II - starts at $19.77 per hour Manufacturing Specialist III - starts at $20.80 per hour Shift differentials are paid at the rate of 10% for hours worked between 5:30PM and 12:00AM and at 15% for hours worked between 12:00AM and 5:30AM Target Cash Bonus with potential payout of up to 2% of earned wages 120 hours of paid Vacation per year, plus paid Sick Leave and 10 paid Holidays Eligible for health benefits on the 1st day of the month after your start date Medical, Dental and Vision Benefits, including prescription and orthodontia with employee-paid premiums as low as $40.00 per pay period Company paid Short-Term and Long-Term Disability, and Life & AD&D Insurance Employee Assistance Program Aflac Supplemental Insurance Flexible Spending and Health Savings Accounts Employee Stock Purchase Plan 401(k) with company match and immediate vesting Jury Duty and Bereavement Leave Pay Tuition Assistance Pet Insurance nLIGHT is subject to US Export Control regulations. To qualify for this position, you must be a US Person (that is, a US citizen, lawful permanent resident, or protected individual granted asylum or refugee status). Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, or age. For more information about our commitment to equal employment opportunity, please see this government poster: Know Your Rights: Workplace Discrimination is Illegal. If you are an individual with a disability and need a reasonable accommodation in the application or hiring process, please contact Human Resources at ************** or *************. E-Verify Participation: nLIGHT participates in the E-Verify program. This employer will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS) with information from each new employee's Form I-9 to confirm work authorization. For more information, please review the following notices: E-Verify Participation Poster Right to Work Poster

Who We Are At nLIGHT, we are constantly on the cutting-edge of laser technology in a massively growing market. We are a leading provider of high-power semiconductors and fiber lasers for industrial, microfabrication, and aerospace & defense applications, to name a few. Our lasers are changing not only the way things are made, but also changing the things that can be made. Headquartered in Camas, Washington, nLIGHT is a publicly listed company (NASDAQ: LASR). Produce high-powered fiber lasers and components as part of a manufacturing team. No experience required. Receive Manufacturing Specialist on-the-job training to perform hands-on production tasks, including electromechanical assembly. nLIGHT offers competitive wages, excellent benefits, and progression increases as you gain experience and develop your skills. * Day Shift: Monday - Friday | 6A-2:30P * Swing Shift: Monday - Friday | 2P-10:30P RESPONSIBILITIES * Learns and performs electromechanical assembly operations. * Uses manual and electronic tools for assembly. * Enters production data into computer-based system. * Contributes as a valued team member. * Performs various production tasks while working in a clean room environment, wearing clean room garments. Duties may include using a microscope and handling solvents. * Engages in production activities according to the documented work instructions and standards. * Identifies and reports any irregularities which are not complaint with work instructions. * Ensures work is completed in a safe manner and complies with all safety and quality standards. * Checks equipment regularly to ensure normal operating activity. * May engage in basic troubleshooting. Qualifications * Experience in electronic assembly is preferred but not required. * Soldering and/or wire bonding experience is a plus. * Ability to work in a team-oriented production environment. * Demonstrated proficiencies in basic computer skills to perform data entry. * Demonstrated problem solving abilities. * Ability to adapt to changing priorities, meet deadlines and work well under pressure. * Good communication skills. * Committed to working safely. * Ability and willingness to follow to all rules and regulations, including safety, attendance, breaks etc. as established by management. * Ability to communicate and follow English written and verbal instructions. * Basic math skills, including: addition, subtraction, and multiplication in order to process inventory, counting, time allocation, and work hours. * Good attention to detail * Ability to work overtime as needed to meet team and company goals. Work Environment: * Must be able to function well in an cleanroom environment. * Must be able to perform in cleanroom wearing cleanroom garments. * Must be able to work in a controlled chemical environment. Physical Requirements: * Ability to work assigned shift with or without a reasonable accommodation. * Must be dependable and reliable. * Ability to sit/stand/walk for 8-hour shift & lift up to 35 pounds with or without a reasonable accommodation. * Ability to frequently use hands for the repetitive actions of simple and firm grasping and fine attention to detail. nLIGHT is proud to offer comprehensive COMPENSATION AND BENEFITS: Starting pay depends on qualifications: * Manufacturing Specialist I - starts $18.73 per hour * Manufacturing Specialist II - starts at $19.77 per hour * Manufacturing Specialist III - starts at $20.80 per hour * Shift differentials are paid at the rate of 10% for hours worked between 5:30PM and 12:00AM and at 15% for hours worked between 12:00AM and 5:30AM * Target Cash Bonus with potential payout of up to 2% of earned wages * 120 hours of paid Vacation per year, plus paid Sick Leave and 10 paid Holidays * Eligible for health benefits on the 1st day of the month after your start date * Medical, Dental and Vision Benefits, including prescription and orthodontia with employee-paid premiums as low as $40.00 per pay period * Company paid Short-Term and Long-Term Disability, and Life & AD&D Insurance * Employee Assistance Program * Aflac Supplemental Insurance * Flexible Spending and Health Savings Accounts * Employee Stock Purchase Plan * 401(k) with company match and immediate vesting * Jury Duty and Bereavement Leave Pay * Tuition Assistance * Pet Insurance nLIGHT is subject to US Export Control regulations. To qualify for this position, you must be a US Person (that is, a US citizen, lawful permanent resident, or protected individual granted asylum or refugee status). Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, or age. For more information about our commitment to equal employment opportunity, please see this government poster: Know Your Rights: Workplace Discrimination is Illegal. If you are an individual with a disability and need a reasonable accommodation in the application or hiring process, please contact Human Resources at ************** or *************. E-Verify Participation: nLIGHT participates in the E-Verify program. This employer will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS) with information from each new employee's Form I-9 to confirm work authorization. For more information, please review the following notices: * E-Verify Participation Poster * Right to Work Poster

The Manufacturing Associate collaborates directly with the team coordinator and department manager to produce quality processes that meets or exceeds IPC standards. This position is key to company quality standards. Vanguard EMS, Inc. is in the service business. Even with Vanguard's state of the art technology, vast manufacturing capability, and leading-edge information tools, we wake up every day thinking about how best to serve our customers, suppliers, and the communities in which we live. What you'll do: Prepare circuit boards for the coating process Manually apply conformal coating to circuit boards with an HVLP spray gun. Apply adhesives to circuit boards Able to work with chemicals Inspect and quality check work to ensure that products meet all customer and regulatory requirements Communicate quality issues to the appropriate team and manager as needed Contribute to a positive team working environment and maintain a clean, organized area. OTHER DUTIES Willingness to assist in other departments as needed. Participate in controlled process improvement projects. Performs other duties as assigned. Requirements What you'll need: Displays a high-level critical thinking, analysis, and organization. Demonstrated self-motivation, problem solving abilities, team spirit and a “hands on” mentality. Ability to give and receive constructive feedback. Effectively manipulate small and/or fragile components and tools Ability to use visual aids, complicated drawings to verify quality products with a strong attention to detail. Excellent communication in person, over the phone, email, and internet or in writing in a positive and professional manner at all times Normal color vision Education and/or Experience High School Diploma, GED or Equivalent Preferred Qualifications Experience with conformal coating processing IPC 610 certification The physical demands and work environment characteristics described above are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. This Job Posting is not intended to be an all-inclusive list of all the responsibilities associated with this position. Management reserves the right to modify and assign other duties as necessary. Benefits Employees enjoy a highly competitive benefits package including: Medical, Dental & Vision 401K (with employer match) Paid time off Paid holidays Profit sharing

The Manufacturing Associate collaborates directly with the team coordinator and department manager to produce quality processes that meets or exceeds IPC standards. This position is key to company quality standards. Vanguard EMS, Inc. is in the service business. Even with Vanguard's state of the art technology, vast manufacturing capability, and leading-edge information tools, we wake up every day thinking about how best to serve our customers, suppliers, and the communities in which we live. What you'll do: Prepare circuit boards for the coating process Manually apply conformal coating to circuit boards with an HVLP spray gun. Apply adhesives to circuit boards Able to work with chemicals Inspect and quality check work to ensure that products meet all customer and regulatory requirements Communicate quality issues to the appropriate team and manager as needed Contribute to a positive team working environment and maintain a clean, organized area. OTHER DUTIES Willingness to assist in other departments as needed. Participate in controlled process improvement projects. Performs other duties as assigned. Requirements What you'll need: Displays a high-level critical thinking, analysis, and organization. Demonstrated self-motivation, problem solving abilities, team spirit and a “hands on” mentality. Ability to give and receive constructive feedback. Effectively manipulate small and/or fragile components and tools Ability to use visual aids, complicated drawings to verify quality products with a strong attention to detail. Excellent communication in person, over the phone, email, and internet or in writing in a positive and professional manner at all times Normal color vision Education and/or Experience High School Diploma, GED or Equivalent Preferred Qualifications Experience with conformal coating processing IPC 610 certification The physical demands and work environment characteristics described above are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. This Job Posting is not intended to be an all-inclusive list of all the responsibilities associated with this position. Management reserves the right to modify and assign other duties as necessary. Benefits Employees enjoy a highly competitive benefits package including: Medical, Dental & Vision 401K (with employer match) Paid time off Paid holidays Profit sharing

Our Dallas, Oregon location is seeking a CMM Quality Technician for our Precision CNC Machine Shop that focuses on Aerospace. This is a critical position within the company and offers an exceptional opportunity to ensure our valued customers receive products of the highest quality possible. Weekend Night Shift: Friday through Sunday, 6 p.m. to 6:30 a.m. Requirements Primary Responsibilities Zeiss/Calypso CMM operation. Running preexisting programs. QA technician and final inspector for precision CNC machined parts Primary operator for the dedicated metrology equipment - CMM, Optical comparator, etc. Key contributor and participant - Quality Management System (AS9100). Responsible for QA data management within the Quality Tracking Database Software Non-Conformance verification of parts using the CMM or manual inspection methods. Checking flatness, perpendicularity, parallelism, etc. Position Requirements: Extremely detail oriented and focused on helping to maintain consistent quality standards Ability to read, understand, and interpret internal and customer provided mechanical prints including GD&T Strong communication skills and able to work as a team member when parts/assemblies are determined to be out of tolerance during final inspection Experience with a wide variety of metrology equipment including CMM, Optical comparator, calipers, micrometers, height gauges, bore gauges, etc. required Experience with manual and/or automated CMM preferred (including formatting of CMM reports) Experience working within an AS 9100 registered organization is preferred Preference will be given to candidates with prior CNC machinist experience CQI or CQT preferred. Working knowledge of Zeiss CMM's with Calypso software Personal Qualifications: Strong decision-making skills Self-Starter / Self-Motivated Reliable and Dependable Positive Attitude Enjoys fast pace and rapidly changing environment Honest with Stellar Integrity Professional Demeanor and Respectful to people in all situations Team Player Compensation/Benefits: $24 to $33 per hour DOE PTO and paid holidays Medical/Dental/Vision Coverage Short- and long-term disability coverage 401K with matching funds Applicant must be able to pass a drug screen and criminal background check prior to employment. ITAR REQUIREMENTS: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Ascentec Engineering is an Equal Opportunity Employer; employment with Ascentec Engineering is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Salary Description $24 to $33 per hour DOE

Be visionary Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. Job Description About Teledyne FLIR Defense Join Teledyne FLIR Defense, where we're dedicated to safeguarding lives with cutting-edge sensing and threat detection technologies. Our arsenal includes advanced surveillance sensors, handheld devices, unmanned vehicles, lasers, and more solutions that increase operational effectiveness for warfighters, first responders, and search-and-rescue teams. We're looking for passionate innovators eager to shape the future of the Defense industry. If you're mission-driven to globally collaborate on life-saving solutions, we invite you to explore our current opportunities. #TeledyneFLIRDefenseJobs Job Summary: Under general supervision, can complete duties that may include assembly of precision components or subsystems having both opto-mechanical and electro-optical assemblies. Perform test and verification procedures for complex opto-mechanical and electro-optical components and subassemblies using defined production procedures. Primary Duties & Responsibilities: Interpreting drawings, training manuals, and instructions in order to perform duties Assembling, installing, repairing, troubleshooting, and maintaining electronic components and systems Performs complex bonding and curing procedures Operates test equipment, instruments, and automated test documentation Inspects and verifies that work is complete and correct Performs other related duties as assigned Job Qualifications: High school diploma or Equivalent A.S. preferred Ability to lift up to 50 lbs. for short durations Demonstrated ability to learn on the job 1 to 2 years' experience in related technical field Preferred Optic Assembly experience Meticulous attention to detail Applicants must be either a U.S. citizen, U.S. national, legal permanent resident, asylee, refugee or must be eligible to apply for and obtain the appropriate export control license from the U.S. Departments of State or Commerce.#FLIR Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws.

**Be visionary** Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. **Job Description** **About Teledyne FLIR Defense** Join Teledyne FLIR Defense, where we're dedicated to safeguarding lives with cutting-edge sensing and threat detection technologies. Our arsenal includes advanced surveillance sensors, handheld devices, unmanned vehicles, lasers, and more solutions that increase operational effectiveness for warfighters, first responders, and search-and-rescue teams. We're looking for passionate innovators eager to shape the future of the Defense industry. If you're mission-driven to globally collaborate on life-saving solutions, we invite you to explore our current opportunities. \#TeledyneFLIRDefenseJobs **Job Summary:** Under general supervision, can complete duties that may include assembly of precision components or subsystems having both opto-mechanical and electro-optical assemblies. Perform test and verification procedures for complex opto-mechanical and electro-optical components and subassemblies using defined production procedures. **Primary Duties & Responsibilities:** + Interpreting drawings, training manuals, and instructions in order to perform duties + Assembling, installing, repairing, troubleshooting, and maintaining electronic components and systems + Performs complex bonding and curing procedures + Operates test equipment, instruments, and automated test documentation + Inspects and verifies that work is complete and correct + Performs other related duties as assigned **Job Qualifications:** + High school diploma or Equivalent + A.S. preferred + Ability to lift up to 50 lbs. for short durations + Demonstrated ability to learn on the job + 1 to 2 years' experience in related technical field + Preferred Optic Assembly experience + Meticulous attention to detail Applicants must be either a U.S. citizen, U.S. national, legal permanent resident, asylee, refugee or must be eligible to apply for and obtain the appropriate export control license from the U.S. Departments of State or Commerce. \#FLIR Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws. You may not realize it, but Teledyne enables many of the products and services you use every day **.** Teledyne provides enabling technologies to sense, transmit and analyze information for industrial growth markets, including aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, energy, medical imaging and pharmaceutical research.

Timber Products is searching for a new generation to propel us into our second century. We're now hiring entry level production technicians. Timber Products offers $21.78 per hour to start with shift differential. From there employees have the opportunity to advance, plus full benefits with matching 401k. To apply contact Express Employment Professionals. (Applications will not be provided and resumes will not be accepted at Timber Products' offices.) Express Employment Professionals Office - Grants Pass: 414 NE E Street, Suite A Grants Pass, OR 97526 Phone: ************* Timber Products is searching for a new generation to propel us into our second century. We're now hiring entry level production technicians. Timber Products offers $21.78 per hour to start with shift differential. From there employees have the opportunity to advance, plus full benefits with matching 401k. To apply contact Express Employment Professionals. (Applications will not be provided and resumes will not be accepted at Timber Products' offices.) Express Employment Professionals Office - Grants Pass: 414 NE E Street, Suite A Grants Pass, OR 97526 Phone: *************

Purpose Accountable for basic operation of the site's quality assurance and control program including but not limited to: assisting and supporting all safety, environmental and quality regulations, product testing and adherence to standards, targets and recipes, maintain relevant equipment and calibrations, and decision-making through basic statistical understanding. Key Responsibilities * Perform all work in accordance with safety rules and regulations and participate in facility health & safety activities as assigned * Use descriptive statistics to identify non-conforming material to site referenced standards and targets * Ensure all relevant quality requirements are consistently met according to the QA manual and plant SOPs * Ensure that non-conforming product is appropriately quarantined, identified and segregated according to standard procedures * Ensure the communication of non-conformance is clear and concise to required parties. * Disposition basic non-conforming product as allowed by site Technical Manager. * Record testing and inspection results by inputting into appropriate database or spreadsheets while identifying and responding to test results outside of product standards and targets * Verify that all product packaging and appearance standards meet site and client expectations. * Generate and analyze reports and charts * Monitor and document process parameter changes as assigned * Communicate test results and observations to operations and management to maintain process and product conformance * Monitor and record consumption and inventory of raw materials (wax, resin, etc.). * Verify quality of raw materials as required * Support preventive and unscheduled maintenance tasks. * Assist in process and product tests/trials. * Be pro-active in identifying and performing other tasks to maintain and improve safety, quality and environmental performance * Demonstrate adherence to process and product SOPs, JSAs, check sheets and other QMS documentation * Provide support to team members when a quality issue arises * Demonstrate drive and willingness to advance to higher levels of responsibility * Perform in a relief capacity for production coordinator * Perform other duties as assigned * Models company core values * Other duties as assigned Required Qualifications * Associate's Degree and two years of experience in laboratory work, quality control, or general manufacturing; or an equivalent combination of training, education, and experience * Knowledge of and ability to follow all quality and process standards * Demonstrated ability to operate a computer and supporting software, to include spreadsheet and statistical packages * Working knowledge of manufacturing equipment and production processes * Demonstrated ability to operate sample preparation and testing equipment * Knowledge of inventory management * Excellent verbal and written communication as well as interpersonal skills * Proficient math skills and statistical knowledge, including concepts * Demonstrated ability to operate a variety of material handling equipment (both hand tools and electrical/motorized equipment) * Ability to climb stairs and lift up to 50 pounds * Demonstrated ability to work while wearing a respirator and/or other safety clothing or equipment Preferred Qualifications * Associate degree in Forest Products, Engineering, Wood Science or related scientific field preferred * Three (3) years plywood, composite, or engineered wood manufacturing experience

Shift is 1:00 p.m. - 10:15 p.m. Sunday through Thursday General Summary: Under minimal supervision, manages operations of plant machinery and the maintenance of the building. Benefits and Culture We offer a competitive compensation and benefits package designed to help employees live a healthier life, build rewarding careers and save for the future. Reser's offers choices whenever possible, because we recognize the diverse and ever changing needs of our employees. Full-time employee benefits include medical, dental, vision, AD&D, life, 401(k) with discretionary match, wellness programs, paid time off, company paid holidays and a variety of voluntary benefit options. We strive to be your Employer of Choice. As one of our five cornerstones, this means that we go all-out to create an environment that shows we are committed to investing in employee growth and creating a culture of belonging where employees want to build a lasting career. Visit our website to learn more about our competitive benefit programs - **************************************** Principle Duties and Responsibilities 1. Sets clear expectations and goals for team members, provides training and support for team, measuring and monitoring performance against goal and objectives and providing feedback, mentoring and support. 1. Oversees the maintenance of production facilities and plant machinery. 2. Schedules preventative maintenance for the building and machinery. 3. Troubleshoots machinery problems and malfunctions. 4. Orders mechanical parts and supplies as needed. 5. Evaluates machinery stock parts for maintenance needs or replacement. 6. Installs machine parts and accessories. 7. Follows company safety guidelines and Good Manufacturing Practices. 8. Regular attendance and punctuality are required due to working with people, items and equipment that are at the facility. Job Specifications 1. 5+ years maintenance experience. 2. High School Diploma or equivalent is required. 3. Basic PC skills are required. 4. Training experience preferred. 5. English/Spanish bilingual is a plus. Working Conditions 1. Refrigerated food manufacturing plant. 2. The environment may be wet or dry and temperatures may range from 25°F to 110°F. 3. Occasional lifting, kneeling, and bending with items in excess of 100 lbs is required. 4. Production demands required evening and/or weekend scheduling greater than 40 hours per week in an exempt role. This position is eligible for a bonus based on company goals/performance. Recipe for Success Reser's is the leading provider of fresh refrigerated deli salads, side dishes, and prepared foods for the supermarket, club store, and food service industries. Family owned and operated, Reser's has been a proud sponsor of good times at racetracks, picnics, BBQs, music festivals, and affordable family meals since 1950. Reser's family of brands include Reser's American Classics, Main St Bistro, Stonemill Kitchens, and more. With more than 4,500 employees, Reser's operates 14 facilities in the US, Mexico, and Canada and actively supports the communities it serves. #INDCentury

Shift is 1:00 p.m. - 10:15 p.m. Sunday through Thursday General Summary: Under minimal supervision, manages operations of plant machinery and the maintenance of the building. Benefits and Culture We offer a competitive compensation and benefits package designed to help employees live a healthier life, build rewarding careers and save for the future. Reser's offers choices whenever possible, because we recognize the diverse and ever changing needs of our employees. Full-time employee benefits include medical, dental, vision, AD&D, life, 401(k) with discretionary match, wellness programs, paid time off, company paid holidays and a variety of voluntary benefit options. We strive to be your Employer of Choice. As one of our five cornerstones, this means that we go all-out to create an environment that shows we are committed to investing in employee growth and creating a culture of belonging where employees want to build a lasting career. Visit our website to learn more about our competitive benefit programs - **************************************** Principle Duties and Responsibilities 1. Sets clear expectations and goals for team members, provides training and support for team, measuring and monitoring performance against goal and objectives and providing feedback, mentoring and support. 1. Oversees the maintenance of production facilities and plant machinery. 2. Schedules preventative maintenance for the building and machinery. 3. Troubleshoots machinery problems and malfunctions. 4. Orders mechanical parts and supplies as needed. 5. Evaluates machinery stock parts for maintenance needs or replacement. 6. Installs machine parts and accessories. 7. Follows company safety guidelines and Good Manufacturing Practices. 8. Regular attendance and punctuality are required due to working with people, items and equipment that are at the facility. Job Specifications 1. 5+ years maintenance experience. 2. High School Diploma or equivalent is required. 3. Basic PC skills are required. 4. Training experience preferred. 5. English/Spanish bilingual is a plus. Working Conditions 1. Refrigerated food manufacturing plant. 2. The environment may be wet or dry and temperatures may range from 25°F to 110°F. 3. Occasional lifting, kneeling, and bending with items in excess of 100 lbs is required. 4. Production demands required evening and/or weekend scheduling greater than 40 hours per week in an exempt role. This position is eligible for a bonus based on company goals/performance. Recipe for Success Reser's is the leading provider of fresh refrigerated deli salads, side dishes, and prepared foods for the supermarket, club store, and food service industries. Family owned and operated, Reser's has been a proud sponsor of good times at racetracks, picnics, BBQs, music festivals, and affordable family meals since 1950. Reser's family of brands include Reser's American Classics, Main St Bistro, Stonemill Kitchens, and more. With more than 4,500 employees, Reser's operates 14 facilities in the US, Mexico, and Canada and actively supports the communities it serves. #INDCentury

Job DescriptionDescription: Ascentec Engineering LLC is hiring! Do you have impeccable attention to detail skills? Do you want to be the last person that reviews our products before they are shipped to our world-class customers? We are looking for CMM Quality Technician III's that provide an essential function in ensuring that only the highest quality products are delivered to our customers. We pride ourselves on investing in our employees and helping them carve their own paths to success. We show our appreciation with company barbecues, Taco Tuesdays, and our annual May the 4th celebration (date Ascentec was founded), complete with Stormtroopers! Please note that preference will be given to candidates that have experience working in a manufacturing setting, but this is not required. Shifts available: Day Shift : Monday through Friday, 8 a.m. to 4:30 p.m.; and Swing Shift : Monday through Friday, 3:30 p.m. to 12 p.m. You will earn an industry-leading hourly shift differential for swing shift. Please note that this position is onsite (not remote/not hybrid) and not eligible for Visa sponsorship. Requirements: JOB RESPONSIBILITIES: To include but not limited to the following: · Proofing CMM programs out and making any changes necessary. Running preexisting programs. · QA technician and final inspector for custom composite tools/fixtures - EMS Division · QA technician and final inspector for precision CNC machined parts - Machining Division · Primary operator for the dedicated metrology equipment - CMM, Optical comparator etc. · Key contributor and participant - Quality Management System (ISO 9001:2008) design and implementation · Focal point for QA data management with in the Quality Tracking Database Software - Unipoint · Manual lay out of parts on the granite. Checking flatness, perpendicularity, parallelism etc. JOB QUALIFICATIONS / EXPERIENCE AND TECHNICAL SKILLS: · Extremely detail oriented and focused on helping to maintain consistent quality standards · Ability to read, understand, and interpret internal and customer provided mechanical prints including GD&T · Strong communication skills and able to work as a team member when parts/assemblies are determined to be out of tolerance during final inspection · Experience with a wide variety of metrology equipment including CMM, Optical comparator, calipers, micrometers, height gauges, bore gauges, etc. required · Experience with manual and/or automated CMM preferred (including formatting of CMM reports) · Experience working within an ISO 9001 registered organization is required · Able to work overtime and limited Saturday shifts as needed · Preference will be given to candidates with prior machinist experience · CQI or CQT preferred. · Strong working knowledge of Zeiss CMM's with Calypso software PERSONAL QUALIFICATIONS: · Strong decision-making skills · Self-Starter / Self-Motivated · Reliable and Dependable · Positive Attitude · Enjoys fast pace and rapidly changing environment · Honest with Stellar Integrity · Professional Demeanor and Respectful to people in all situations · Team Player COMPENSATION/BENEFITS: · $27 to $42 per hour DOE · Medical / Dental / Vision · 401k with company match up to 4% · Tiered Quarterly Bonus Program · Short-term and Long-term Disability · Tuition Assistance or Reimbursement · Life Insurance · Paid time off / paid holidays · Employee Assistance Programs Applicant must be able to pass a drug screen and criminal background check prior to employment. ITAR REQUIREMENTS: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Ascentec Engineering is an Equal Opportunity Employer; employment with Ascentec Engineering is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescription: Ascentec Engineering LLC is hiring! We are looking for team members that have strong attention to detail skills and want to join a company where they can grow their career. This is a critical role and presents a great opportunity for someone to provide final assurance to our customers that their products are the highest quality. Please note that preference will be given to candidates that have experience working in a manufacturing setting, but this is not required. Come join our team and feel valued by celebrating our successes with donut days, company barbecues, Taco Tuesdays, and our annual May the 4th celebration (date our company was founded) complete with Stormtroopers! Shifts available: Swing Shift: Monday through Thursday, 4 p.m. to 2:30 a.m.; Weekend Day Shift: Friday, Saturday, & Sunday, 5 a.m. to 5:30 a.m.; and Weekend Night Shift: Friday, Saturday, & Sunday, 5 p.m. to 5:30 a.m. All shifts are full-time and eligible for benefits. Please note that these roles are on-site (not remote/not hybrid) and not eligible for Visa sponsorship or transfer of Visa sponsorship. Requirements: JOB RESPONSIBILITIES: To include but not limited to the following: Zeiss/Calypso CMM operation. Running preexisting programs. QA technician and final inspector for precision CNC machined parts Primary operator for the dedicated metrology equipment - CMM, Optical comparator etc. Key contributor and participant - Quality Management System (AS9100). Responsible for QA data management with in the Quality Tracking Database Software - Unipoint Non-Conformance verification of parts using the either alternate CMM or manual inspection methods. Checking flatness, perpendicularity, parallelism etc. JOB QUALIFICATIONS / EXPERIENCE AND TECHNICAL SKILLS: Extremely detail oriented and focused on helping to maintain consistent quality standards Ability to read, understand, and interpret internal and customer provided mechanical prints including GD&T Strong communication skills and able to work as a team member when parts/assemblies are determined to be out of tolerance during final inspection Experience with a wide variety of metrology equipment including CMM, Optical comparator, calipers, micrometers, height gauges, bore gauges, etc. required Experience with manual and/or automated CMM preferred (including formatting of CMM reports) Experience working within an AS 9100 registered organization is preferred Able to work overtime and weekend shifts as needed Preference will be given to candidates with prior CNC machinist experience CQI or CQT preferred. Working knowledge of Zeiss CMM's with Calypso software PERSONAL QUALIFICATIONS: Strong decision-making skills Self-Starter / Self-Motivated Reliable and Dependable Positive Attitude Enjoys fast pace and rapidly changing environment Honest with Good Integrity Professional Demeanor and Respectful to people in all situations Team Player COMPENSATION/BENEFITS: $27 to $35 per hour DOE Medical / Dental / Vision 401k with company match up to 4% Tiered Quarterly Bonus Program Short-term and Long-term Disability Tuition Assistance or Reimbursement Life Insurance Paid time off / paid holidays Employee Assistance Programs Applicant must be able to pass a drug screen and criminal background check prior to employment. ITAR REQUIREMENTS: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Ascentec Engineering is an Equal Opportunity Employer; employment with Ascentec Engineering is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Ascentec Engineering LLC is hiring! We are looking for team members that have strong attention to detail skills and want to join a company where they can grow their career. This is a critical role and presents a great opportunity for someone to provide final assurance to our customers that their products are the highest quality. Please note that preference will be given to candidates that have experience working in a manufacturing setting, but this is not required. Come join our team and feel valued by celebrating our successes with donut days, company barbecues, Taco Tuesdays, and our annual May the 4th celebration (date our company was founded) complete with Stormtroopers! Shifts available: Swing Shift: Monday through Thursday, 4 p.m. to 2:30 a.m.; Weekend Day Shift: Friday, Saturday, & Sunday, 5 a.m. to 5:30 a.m.; and Weekend Night Shift: Friday, Saturday, & Sunday, 5 p.m. to 5:30 a.m. All shifts are full-time and eligible for benefits. Please note that these roles are on-site (not remote/not hybrid) and not eligible for Visa sponsorship or transfer of Visa sponsorship. Requirements JOB RESPONSIBILITIES: To include but not limited to the following: Zeiss/Calypso CMM operation. Running preexisting programs. QA technician and final inspector for precision CNC machined parts Primary operator for the dedicated metrology equipment - CMM, Optical comparator etc. Key contributor and participant - Quality Management System (AS9100). Responsible for QA data management with in the Quality Tracking Database Software - Unipoint Non-Conformance verification of parts using the either alternate CMM or manual inspection methods. Checking flatness, perpendicularity, parallelism etc. JOB QUALIFICATIONS / EXPERIENCE AND TECHNICAL SKILLS: Extremely detail oriented and focused on helping to maintain consistent quality standards Ability to read, understand, and interpret internal and customer provided mechanical prints including GD&T Strong communication skills and able to work as a team member when parts/assemblies are determined to be out of tolerance during final inspection Experience with a wide variety of metrology equipment including CMM, Optical comparator, calipers, micrometers, height gauges, bore gauges, etc. required Experience with manual and/or automated CMM preferred (including formatting of CMM reports) Experience working within an AS 9100 registered organization is preferred Able to work overtime and weekend shifts as needed Preference will be given to candidates with prior CNC machinist experience CQI or CQT preferred. Working knowledge of Zeiss CMM's with Calypso software PERSONAL QUALIFICATIONS: Strong decision-making skills Self-Starter / Self-Motivated Reliable and Dependable Positive Attitude Enjoys fast pace and rapidly changing environment Honest with Good Integrity Professional Demeanor and Respectful to people in all situations Team Player COMPENSATION/BENEFITS: $27 to $35 per hour DOE Medical / Dental / Vision 401k with company match up to 4% Tiered Quarterly Bonus Program Short-term and Long-term Disability Tuition Assistance or Reimbursement Life Insurance Paid time off / paid holidays Employee Assistance Programs Applicant must be able to pass a drug screen and criminal background check prior to employment. ITAR REQUIREMENTS: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Ascentec Engineering is an Equal Opportunity Employer; employment with Ascentec Engineering is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Salary Description $27 to $35 per hour

About the Role Join Watlow's Technology Development Center (TDC) in Hillsboro, Oregon, where innovation and speed come together. As a Prototype Manufacturing Technician, you'll set up, program, and run complex equipment and tools used in rapid prototyping, including Juki sewing machines and other automated sewing equipment. You'll collaborate with engineers to bring new product designs to life, perform equipment troubleshooting, and help ensure prototypes and finished products meet exacting standards. At the TDC, you'll be part of a team that directly supports new product development for the semiconductor industry. You'll gain exposure to cutting-edge equipment, contribute to process improvements, and help accelerate time-to-market by turning part designs into working prototypes. Your Key Responsibilities Set up, program, and operate equipment, tools, and machine tools for production and prototype builds. Support rapid prototyping activities by adjusting processes and tooling to new designs. Building prototype parts using sewing machines and process Perform simple and complex maintenance on production and support equipment. Collect, review, and analyze production and prototype data. Train and mentor team members on processes and equipment as needed. Required Qualifications High school diploma or GED required; two-year technical degree or certificate preferred. 3-5 years of related experience in manufacturing, machining, or prototyping. Strong troubleshooting and problem-solving skills. Comfortable working in a fast-paced environment with frequent design changes. Team-oriented with strong communication and collaboration skills. Preferred experience Experience with clothing and textile industries

About the Role Join Watlow's Technology Development Center (TDC) in Hillsboro, Oregon, where innovation and speed come together. As a Prototype Manufacturing Technician, you'll set up, program, and run complex equipment and tools used in rapid prototyping, including Juki sewing machines and other automated sewing equipment. You'll collaborate with engineers to bring new product designs to life, perform equipment troubleshooting, and help ensure prototypes and finished products meet exacting standards. At the TDC, you'll be part of a team that directly supports new product development for the semiconductor industry. You'll gain exposure to cutting-edge equipment, contribute to process improvements, and help accelerate time-to-market by turning part designs into working prototypes. Your Key Responsibilities Set up, program, and operate equipment, tools, and machine tools for production and prototype builds. Support rapid prototyping activities by adjusting processes and tooling to new designs. Building prototype parts using sewing machines and process Perform simple and complex maintenance on production and support equipment. Collect, review, and analyze production and prototype data. Train and mentor team members on processes and equipment as needed. Required Qualifications High school diploma or GED required; two-year technical degree or certificate preferred. 3-5 years of related experience in manufacturing, machining, or prototyping. Strong troubleshooting and problem-solving skills. Comfortable working in a fast-paced environment with frequent design changes. Team-oriented with strong communication and collaboration skills. Preferred experience Experience with clothing and textile industries

Ascentec Engineering LLC is hiring! We are seeking a CMM Quality Technician IV who will serve as the technical authority for Coordinate Measuring Machine (CMM) programming, inspection methodology, and data analysis in support of New Product Introduction (NPI) and production. This role is responsible for executing precision inspection for complex parts and for training and developing current and future metrology personnel to a defined standard. The position will lead the creation, implementation, and ongoing management of the company's CMM Training Manual, establishing a unified standard of metrology practices for all company sites, domestic and international. This position is on-site (not remote/not hybrid) and is not eligible for Visa sponsorship or transfer of Visa sponsorship. Requirements JOB RESPONSIBILITIES: To include but not limited to the following: Develop, validate, and optimize CMM programs to support NPI parts, ensuring compliance with customer drawings, GD&T, and process of record requirements. Partner with Engineering, Quality, and Production to establish robust inspection strategies that mitigate risk in early-stage builds. Troubleshoot and resolve dimensional inspection challenges, ensuring on-time delivery of inspection data. Design and deliver structured training for CMM operators and inspectors, including onboarding for new hires and upskilling for current staff. Update and manage a CMM Operator Evaluation Template to measure technical proficiency, productivity, and quality of output against defined standards. Conduct skill gap assessments and implement targeted development plans for individuals and teams. Lead the creation and deployment of the Ascentec Engineering CMM Training Manual, stored within company systems, to serve as the standard for all sites. Standardize CMM programming methods, inspection workflows, and reporting formats across facilities. Implement inspection KPIs (e.g., first-pass yield, programming cycle time, inspection backlog, repeatability/reproducibility metrics) and drive performance improvement. Ensure calibration schedules, probe qualification, and maintenance plans are adhered to for all metrology equipment. Evaluate and recommend emerging inspection technologies, automation, and software enhancements to improve accuracy, throughput, and efficiency. Benchmark Ascentec's metrology capabilities against industry leaders and develop plans to close gaps. Operates dedicated metrology equipment. Proofs CMM programs out while making any necessary changes and runs preexisting programs Performs other duties as assigned. MINIMUM REQUIREMENTS: Education/Certifications High School Diploma or equivalent CORE COMPETENCIES: Advanced CMM Programming & Optimization - Expert in developing, validating, and refining complex CMM programs to meet GD&T and customer drawing specifications, especially for new product introduction (NPI) parts. Inspection Strategy Development - Collaborates cross-functionally with Engineering, Quality, and Production to establish robust, risk-mitigating inspection strategies during early-stage builds. Technical Troubleshooting & Problem-Solving - Capable of diagnosing and resolving complex dimensional inspection challenges to ensure timely and accurate reporting of critical quality data. Training Program Design & Delivery - Designs and delivers structured onboarding and upskilling programs for CMM operators and inspectors; mentors team members and supports long-term skill development. Performance Evaluation & Skill Assessment - Develops and maintains tools (e.g., Operator Evaluation Templates) to assess technical proficiency and drive targeted performance improvements. Documentation & Standardization Leadership - Leads creation of standardized CMM manuals, work instructions, and best practices libraries to ensure consistency across sites and teams. Cross-Site Process Standardization - Champions uniformity in CMM programming techniques, inspection workflows, and reporting formats across company facilities. Continuous Improvement & KPI Management - Implements and tracks key inspection metrics (e.g., first-pass yield, cycle times, repeatability) to drive performance, quality, and throughput improvements. Calibration & Equipment Readiness - Oversees metrology equipment calibration, probe qualification, and maintenance schedules to maintain compliance and measurement accuracy. Technology Evaluation & Innovation - Researches and recommends emerging inspection technologies, automation solutions, and software tools to enhance inspection capability and scalability. Industry Benchmarking & Capability Growth - Benchmarks internal metrology systems against industry best practices and drives strategic improvements to maintain competitive edge. Communication & Collaboration - Effectively communicates across departments and levels, providing technical leadership while aligning quality objectives with production and engineering goals. Systems & Documentation Management - Maintains high standards in digital documentation, version control, and system-based storage for training, work instructions, and inspection protocols. COMPENSATION/BENEFITS: $34 to $50 per hour DOE Medical / Dental / Vision 401k with company match up to 4% Tiered Quarterly Bonus Program Short-term and Long-term Disability Tuition Assistance or Reimbursement Life Insurance Paid time off / paid holidays Employee Assistance Programs Applicant must be able to pass a drug screen and criminal background check prior to employment. ITAR REQUIREMENTS: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Ascentec Engineering is an Equal Opportunity Employer; employment with Ascentec Engineering is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Salary Description $34 to $50 per hour