Track worker job description
Updated March 14, 2024
7 min read
Find better candidates in less time
Post a job on Zippia and take the best from over 7 million monthly job seekers.
Example track worker requirements on a job description
Track worker requirements can be divided into technical requirements and required soft skills. The lists below show the most common requirements included in track worker job postings.
Sample track worker requirements
- Holds a valid driver's license
- Ability to read and understand safety procedures
- Physically fit and able to perform manual labor
- Experience working with hand and power tools
- Willingness to work outdoors in various weather conditions
Sample required track worker soft skills
- Excellent communication skills to work in a team environment
- Ability to follow instructions and adhere to safety protocols
- Attention to detail and accuracy in completing tasks
- Strong problem-solving skills to address unexpected issues
- Flexibility and adaptability to changing work conditions
Track worker job description example 1
Genesee & Wyoming track worker job description
The person in this position works as a crew member to maintain, repair, and replace rails, ties, switches, and ballast. This position uses hand tools and operates heavy equipment. The position starts as a track maintainer, with an opportunity to qualify as a machine operator.
The position involves 100% travel across the Genesee & Wyoming system in Continental US, typically working (8) 10 hour days followed by 6 days off. Travel to and from the job is on the off time. Overtime, while minimized, is expected. Lodging, Per diem and travel reimbursement are in accordance with current RES policy.
RESPONSIBILITIES:
+ Repair and rebuild railroad track using hydraulic or hand tools
+ Remove and replace ties and rails; pull and drive spikes; shovel rock ballast; load and unload equipment and material
+ Use various types of tools and equipment, including tampers, regulators, backhoes, torches, hammers, jacks, and other mechanical, hydraulic, and pneumatic tools
+ Perform routine maintenance and troubleshoot problems on equipment
+ Complete written forms and reports, including FRA reports, as required
+ Be familiar with federal and state regulations as they relate to the railroad industry
+ Ability to update rules and manuals to assure continuous compliance with all federal regulations
+ Adhere to and promote safe work practices as determined by the railroad
+ Manage other projects and perform other duties as assigned
REQUIRED SKILLS AND/OR EXPERIENCE:
+ Ability to complete written forms and reports, including FRA reports, as required
+ Working knowledge of and familiarity with equipment such as tampers, regulators, torches, hammers, jacks, and other mechanical, hydraulic, and pneumatic tools
+ Ability to perform routine maintenance and troubleshoot problems on equipment
+ Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and federal and state regulation
+ Excellent oral and written communication skills
+ Experience with heavy hand tools, and previous work in an outside environment preferred
REQUIRED EDUCATION AND/OR CREDENTIALS:
+ High school diploma or GED; or an equivalent combination of education and work experience a plus
+ Valid driver's license required
+ Commercial Driver's License (CDL) is a plus
This position is employed by the specific entity set forth in the job posting.
Genesee & Wyoming Inc. and its subsidiary companies do not discriminate in employment on the basis of race, color, religion, sex (including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, retaliation, parental status, military service, or any other protected status under federal, state or local laws.
The position involves 100% travel across the Genesee & Wyoming system in Continental US, typically working (8) 10 hour days followed by 6 days off. Travel to and from the job is on the off time. Overtime, while minimized, is expected. Lodging, Per diem and travel reimbursement are in accordance with current RES policy.
RESPONSIBILITIES:
+ Repair and rebuild railroad track using hydraulic or hand tools
+ Remove and replace ties and rails; pull and drive spikes; shovel rock ballast; load and unload equipment and material
+ Use various types of tools and equipment, including tampers, regulators, backhoes, torches, hammers, jacks, and other mechanical, hydraulic, and pneumatic tools
+ Perform routine maintenance and troubleshoot problems on equipment
+ Complete written forms and reports, including FRA reports, as required
+ Be familiar with federal and state regulations as they relate to the railroad industry
+ Ability to update rules and manuals to assure continuous compliance with all federal regulations
+ Adhere to and promote safe work practices as determined by the railroad
+ Manage other projects and perform other duties as assigned
REQUIRED SKILLS AND/OR EXPERIENCE:
+ Ability to complete written forms and reports, including FRA reports, as required
+ Working knowledge of and familiarity with equipment such as tampers, regulators, torches, hammers, jacks, and other mechanical, hydraulic, and pneumatic tools
+ Ability to perform routine maintenance and troubleshoot problems on equipment
+ Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and federal and state regulation
+ Excellent oral and written communication skills
+ Experience with heavy hand tools, and previous work in an outside environment preferred
REQUIRED EDUCATION AND/OR CREDENTIALS:
+ High school diploma or GED; or an equivalent combination of education and work experience a plus
+ Valid driver's license required
+ Commercial Driver's License (CDL) is a plus
This position is employed by the specific entity set forth in the job posting.
Genesee & Wyoming Inc. and its subsidiary companies do not discriminate in employment on the basis of race, color, religion, sex (including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, retaliation, parental status, military service, or any other protected status under federal, state or local laws.
Post a job for free, promote it for a fee
Track worker job description example 2
CSX track worker job description
Work as a member of a crew to install new railroad track, maintain existing track and right-of-way. Employees must be able to meet and comply with the manufacturer's weight limitation safety rating and recommendations for any equipment associated with performing their duties, including the 300 lb. safety rating for ladders (both portable and affixed) and fall arrest equipment.
Primary Activities and Responsibilities
* Ensure compliance with all railroad rules and regulations for safety, operations and the Federal Railroad Administration (FRA)
* Participate in group discussions including unit meetings, job briefings, safety meetings or process reviews
* Remove and replace track and track components (e.g. ties, rails, bars, etc.)
* Replace or repair track switches with specific components
* Slide and align tie plates
* Drill holes through rails for insertion of bolts and tighten or loosen bolts at joints that hold ends or rails together
* Correct deviations in track surface, alignment and gauge
* Cut rails to specific lengths
* Receive instructions, requests, orders, and information from posted bulletins, memorandums, rules and regulation manuals
* Adjust, lift and roll rails
* Sort track material for loading and unloading
* Install and repair street and railroad crossings
* Cut brush and vegetation from the right-of-way
* Spray switches, angle bars and joints with oil for lubrication
* Miscellaneous activities and responsibilities as assigned by manager
Pay Rate
Entry Rates:90% First year - $25.54/hr 95% Second year - $26.96/hr 100% Third year - $28.38/hr
Training
You will attend two weeks training in Atlanta, GA. CSX will pay for travel, lodging and meals as required by collective bargaining agreement.
Minimum Qualifications
* High School Diploma/GED
* 18 years of age or older
* Valid Driver's License
* Ability to obtain a Commercial Drivers License (Class A or Class B) within 60 days of hire
Preferred Qualifications
* One or more years of outside work exp (e.g. construction, heavy equipment op, farming,etc)
* Welding experience
* Commercial Driver's License (CDL)
* Commercial Driver's License (CDL) Class A with Airbrake Endorsement
Physical Requirements
* Heavy work, lifting up to 60 pounds occasionally and up to 85 pounds on a rare basis
* Stoop/bend/kneel/crouch/crawl/balance/climb
* Exposure to equipment that intensifies the heat factor on an occasional basis
* Demonstrate auditory and visual acuity/tracking/inspection
Basic Competencies
* Verbal comprehension (Understand oral and written communications)
* Communication skills (provide clear instructions/directions)
* Reasoning skills (problem solving and troubleshooting skills)
* Basic Math
Job Requirements
* Work safely to prevent on the job accidents and injuries
* Wear protective equipment such as hard hat, hearing protection, or safety-toe boots
* Work hours may include a nonstandard workweek, overtime, and various shift work
* Complete annual training and pass safety rules examinations
* Must successfully pass probationary period
* This position is governed by a collective bargaining agreement and membership is req.
* May require regional travel
* Must pass a post-offer medical examination, including a drug test
Primary Activities and Responsibilities
* Ensure compliance with all railroad rules and regulations for safety, operations and the Federal Railroad Administration (FRA)
* Participate in group discussions including unit meetings, job briefings, safety meetings or process reviews
* Remove and replace track and track components (e.g. ties, rails, bars, etc.)
* Replace or repair track switches with specific components
* Slide and align tie plates
* Drill holes through rails for insertion of bolts and tighten or loosen bolts at joints that hold ends or rails together
* Correct deviations in track surface, alignment and gauge
* Cut rails to specific lengths
* Receive instructions, requests, orders, and information from posted bulletins, memorandums, rules and regulation manuals
* Adjust, lift and roll rails
* Sort track material for loading and unloading
* Install and repair street and railroad crossings
* Cut brush and vegetation from the right-of-way
* Spray switches, angle bars and joints with oil for lubrication
* Miscellaneous activities and responsibilities as assigned by manager
Pay Rate
Entry Rates:90% First year - $25.54/hr 95% Second year - $26.96/hr 100% Third year - $28.38/hr
Training
You will attend two weeks training in Atlanta, GA. CSX will pay for travel, lodging and meals as required by collective bargaining agreement.
Minimum Qualifications
* High School Diploma/GED
* 18 years of age or older
* Valid Driver's License
* Ability to obtain a Commercial Drivers License (Class A or Class B) within 60 days of hire
Preferred Qualifications
* One or more years of outside work exp (e.g. construction, heavy equipment op, farming,etc)
* Welding experience
* Commercial Driver's License (CDL)
* Commercial Driver's License (CDL) Class A with Airbrake Endorsement
Physical Requirements
* Heavy work, lifting up to 60 pounds occasionally and up to 85 pounds on a rare basis
* Stoop/bend/kneel/crouch/crawl/balance/climb
* Exposure to equipment that intensifies the heat factor on an occasional basis
* Demonstrate auditory and visual acuity/tracking/inspection
Basic Competencies
* Verbal comprehension (Understand oral and written communications)
* Communication skills (provide clear instructions/directions)
* Reasoning skills (problem solving and troubleshooting skills)
* Basic Math
Job Requirements
* Work safely to prevent on the job accidents and injuries
* Wear protective equipment such as hard hat, hearing protection, or safety-toe boots
* Work hours may include a nonstandard workweek, overtime, and various shift work
* Complete annual training and pass safety rules examinations
* Must successfully pass probationary period
* This position is governed by a collective bargaining agreement and membership is req.
* May require regional travel
* Must pass a post-offer medical examination, including a drug test
Dealing with hard-to-fill positions? Let us help.
Track worker job description example 3
Road & Rail Services track worker job description
+ Jobs
+ Job Map
+ Login
+ Bartow, FL, USA
+ Paid Weekly
+ Hourly
+ Full Time
Health, Dental, 401k, Paid Weekly, Annual Bonus, Paid Vacation and Holidays.
Email Me Similar Jobs Email Me This Job
Road & Rail Services
Track Worker/ Equipment Operator
Job Summary:
Work as a member of a crew to install new railroad track and maintain existing track.
Primary Activities and Responsibilities:
+ Ensure compliance with all company rules and regulations for safety.
+ Participate in group discussions including team meetings, job briefings, safety meetings or process reviews.
+ Clean, Remove and replace track and components
+ Cut rails to specific lengths.
+ Adjust, lift, and roll rails.
+ Sort track material for loading and unloading.
+ Cut brush and vegetation from the right-of-way.
+ Spray switches, angle bars and joints with oil for lubrication
Pay Rate based on experience and qualifications, starting pay rate $17.00
+ Minimum Qualifications:
+ High School diploma/GED or Ability
+ 18 years of age or older
+ Valid Driver's License
Preferred Qualifications:
+ Outside work experience (e.g., construction, equipment operation, farming, landscaping, Hot work torch cutting / grinding)
+ Welding experience
+ Basic Competencies:
+ Verbal comprehension (Understand oral and written communications--both general and technical)
+ Communication skills (provide clear instructions/directions)
+ Reasoning skills (problem solving and troubleshooting skills)
+ Basic Math
Physical Requirements:
+ Heavy work, lifting to 50 pounds occasionally.
+ Stoop/bend/kneel/crouch/balance/climb on an occasional basis.
+ Demonstrate auditory and visual acuity.
Environmental Conditions:
+ Work outside in all weather conditions and on occasion at elevated heights.
Benefits:
+ A Full Benefits package including Medical, Dental, 401K
+ Paid Holidays and Vacations
+ An annual Steel Toe Boot allowance
+ All Personal Protective Equipment (PPE) provided
+ Veteran Friendly
+ A promote from within mentality.
We appreciate and encourage our associates to share their ideas and help shape our future. We want our associates to play a key role in growing our business. With our locations across North America, there are opportunities to grow with our Company. Apply Now!
Company Overview:
Established in 1987, Road & Rail Services has grown and diversified to become a leading provider of rail-related services in North America. Our network of skilled associates provides plant and terminal operating expertise as well as field maintenance of rail assets for railroads, rail shippers, and owners of rail related equipment and facilities. Visit us online at www.roadandrail.com for more information!
+ Job Map
+ Login
+ Bartow, FL, USA
+ Paid Weekly
+ Hourly
+ Full Time
Health, Dental, 401k, Paid Weekly, Annual Bonus, Paid Vacation and Holidays.
Email Me Similar Jobs Email Me This Job
Road & Rail Services
Track Worker/ Equipment Operator
Job Summary:
Work as a member of a crew to install new railroad track and maintain existing track.
Primary Activities and Responsibilities:
+ Ensure compliance with all company rules and regulations for safety.
+ Participate in group discussions including team meetings, job briefings, safety meetings or process reviews.
+ Clean, Remove and replace track and components
+ Cut rails to specific lengths.
+ Adjust, lift, and roll rails.
+ Sort track material for loading and unloading.
+ Cut brush and vegetation from the right-of-way.
+ Spray switches, angle bars and joints with oil for lubrication
Pay Rate based on experience and qualifications, starting pay rate $17.00
+ Minimum Qualifications:
+ High School diploma/GED or Ability
+ 18 years of age or older
+ Valid Driver's License
Preferred Qualifications:
+ Outside work experience (e.g., construction, equipment operation, farming, landscaping, Hot work torch cutting / grinding)
+ Welding experience
+ Basic Competencies:
+ Verbal comprehension (Understand oral and written communications--both general and technical)
+ Communication skills (provide clear instructions/directions)
+ Reasoning skills (problem solving and troubleshooting skills)
+ Basic Math
Physical Requirements:
+ Heavy work, lifting to 50 pounds occasionally.
+ Stoop/bend/kneel/crouch/balance/climb on an occasional basis.
+ Demonstrate auditory and visual acuity.
Environmental Conditions:
+ Work outside in all weather conditions and on occasion at elevated heights.
Benefits:
+ A Full Benefits package including Medical, Dental, 401K
+ Paid Holidays and Vacations
+ An annual Steel Toe Boot allowance
+ All Personal Protective Equipment (PPE) provided
+ Veteran Friendly
+ A promote from within mentality.
We appreciate and encourage our associates to share their ideas and help shape our future. We want our associates to play a key role in growing our business. With our locations across North America, there are opportunities to grow with our Company. Apply Now!
Company Overview:
Established in 1987, Road & Rail Services has grown and diversified to become a leading provider of rail-related services in North America. Our network of skilled associates provides plant and terminal operating expertise as well as field maintenance of rail assets for railroads, rail shippers, and owners of rail related equipment and facilities. Visit us online at www.roadandrail.com for more information!
Start connecting with qualified job seekers
Resources for employers posting track worker jobs
Average cost of hiring
Recruitment statistics
How to write a job description
Examples of work conditions
Track worker job description FAQs
Ready to start hiring?
Updated March 14, 2024
Updated March 14, 2024