Transcat jobs in Rochester, NY

BECOME A US FOODS DRIVER!Ready to build a career with a company that's leading the foodservice industry?Schedule: Monday - Friday 2:30am 6am start time May occasionally have an over night shift Our delivery drivers start at $31.23 hour. After completion of probation period, wage increases to $33.73 hour! US Foods is one of the largest food distributors with a culture and history of promoting from within, excellent training programs and a continuous improvement focus. Main Ingredients of the Job Safely drive trucks to customers and meet scheduled customer delivery times Carefully unload products from the trailer with a two-wheeler, pallet jack, or by hand and place in designated customer storage areas Verify accuracy of delivery with customers and obtain proper signatures Handle collections and payments from customers when applicable Professionally perform customer service responsibilities to enhance our client experience Perform all pre-trip and post-trip equipment inspection Physical Requirements Ability to lift/carry/push/pull 20 to 80+ lbs. of product repetitively during each shift required Comfortable driving and working in inclement weather conditions with frequent stops (10+ per shift) required What You Bring to the Table Register to the FMCSA Clearinghouse* Must be at least 21 years of age Must have valid CDL Class A issued by the state of legal residence with necessary endorsements and DOT qualifications Minimum of six months commercial driving experience (any industry) OR three months commercial driving experience in the food and/or beverage delivery industry required Ability to operate manual transmission preferred; may be required in specific locations Must be able to read and communicate in the English language - able to hold a conversation, to understand highway traffic signs and signals, to respond to official inquiries, and to enter information on reports and records. Why US Foods US Foods helps our customers Make It , with products and services that shape the communities where we live and work. Opportunities in our company abound for skilled, forward-thinking associates. Great drivers are crucial to the US Foods team and one of the important faces of our organization. On and off the road, our drivers strive for integrity and reliability, while building trusting relationships with customers. At the foundation of those efforts are our cultural beliefs, the pillars that define our work ethic, collaborative spirit and service. Together we help our customers make it, but we also believe in helping our drivers make it! At US Foods , we are committed to Total Rewards that respect and reward our associates for their dedication and hard work. At US Foods , we are committed to Total Rewards that respect and reward our associates for their dedication and hard work. Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $31.23 and $33.73 Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: ********************************************** *Registering to the FMCSA Clearinghouse is a requirement by the Department of Transportation. All Drivers are required to the Clearinghouse website and register to the new database. The Clearinghouse is a secure online database that provides real-time information about commercial driver's license (CDL) and commercial learner's permit (CLP) holders' drug and alcohol program violations. If you have not registered to the FMCSA database, please note registration is required. Please visit ******************************************** and click GO to login. If you are able to log into login, but are having trouble with the Clearinghouse registration, see “Clearinghouse Help” field on the clearinghouse page.

Our Team is Kind of a Big Deal! UniFirst First Aid + Safety is seeking a reliable and hardworking Professional Sales Person to join our family. As a Team Partner in the Sales Department, you will be developing new business for UniFirst First Aid retail marketing through high-level selling skills. When working with UniFirst First Aid + Safety we provide a variety of shifts. Our standard is a 5-day work week, enjoy two days off a week. We have an immediate opening and provide on the job training. Pay & Benefits: On the job training & great hourly pay + 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. What's in it for you? Training: Our Team Partners receive ongoing cross-training, exposing them to different department areas. Cross training enhances their performance and assists them with their career potential and advancement. Work Life Balance: We offer up to 40-hours a week! Career Growth: Some companies like to promote from within, we love to! Culture: Our family culture is what makes UniFirst First Aid + Safety an organization that stands out from the rest. Diversity: At UniFirst First Aid + Safety, you'll find an environment packed with different cultures, personalities, and backgrounds. We believe our diversity makes us who we are, and we strive every day to build a culture where everyone feels welcome. What you'll be doing: Sell and promote First Aid products to new accounts with 75 employees or more and/or multiple locations. Develop new business and penetrate accounts further to sell additional lines with the priority as first aid, facility services, and safety products. Meet new customer needs with products that will help provide a safe, pleasant, and productive workplace. Lead 411 as another tool to grow your prospect hopper. Organize and implement a “work plan' for maximizing daily sales and decreasing mileage between calls. Maintain a call average that is consistent with current company objectives. Promote growth by continuously setting appointments, making cold calls, and gaining referrals for new business. Participate and execute information provided from sales meetings. Submit work orders, paperwork and expense reports as required. Keep paper-flow consistent by ensuring accuracy. Communicate with the local Sales Manager, Territory Manager and the Regional Sales Manager with all pertinent information for any new accounts. Keep abreast of all price changes and sell accordingly. Maintain a prospect database of all accounts being developed. Participate in periodic promotions. Ensure that personal vehicle used for company business is clean, organized, and properly maintained. Adhere to company policies as outlined in the UniFirst Employee handbook and the Green Guard Field Manual. Keep up to date about competitive companies, their products, and prices. Share pertinent information about pricing and products with other employees during sales meetings. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school and/or GED equivalent is required. Must be 18 years of age or older. Valid driver's license and safe driving record are required. Individuals who drive their personal vehicles for business purposes will be required to comply with minimum auto insurance requirements per UniFirst's standards. Two years of business to business selling experience is required. High-level selling skill including strong prospecting and closing skills. Knowledge and exceptional sales experience. Ability to be resourceful. Ability to lift up to 30 lbs. Individuals who drive their personal vehicles for business purposes will be required to comply with minimum auto insurance requirements per UniFirst's standards About UniFirst First Aid + Safety UniFirst First Aid + Safety is a division of the UniFirst Corporation. UniFirst First Aid + Safety is one of the largest providers of First Aid, AEDs, Compliance Training, Safety and PPE products in the United States. Businesses such as manufacturing, office buildings, retail, construction, logistics, automotive, and government agencies, are just a few examples of our current customer base. We are part of a $70 million division within a $1.8 billion company. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

At KARL STORZ, we are driven by a mission to enhance global health through innovative technology designed to tackle the most complex surgical procedures and medical challenges. One of the most rewarding ways to launch your career with us is by joining our Onsite Endoscopic Specialist (OES) team. In this role, you will be at the forefront of healthcare innovation, providing hands-on support for KARL STORZ advanced medical devices-ranging from hand instruments to state-of-the-art video equipment-within your assigned hospital. As an OES, you will collaborate closely with the Sterile Processing Departments and Operating Room teams, playing a critical role in ensuring the success of surgical procedures. This position is more than just a job-it is a gateway to an exciting and diverse career path. Whether you aspire to transition into medical device sales, advance into leadership, share your knowledge as an educator, or specialize in marketing, the opportunities for growth within KARL STORZ are limitless. With a commitment to internal development, we empower you to explore your passions, develop your skills, and propel your career to new heights. Join us and be part of a team dedicated to making a tangible impact on global health! Key Responsibilities: Face-to-face customer support, including OR, SPD and Biomed Video tower/system set-up and support Inspection, repair, troubleshooting and replacement of KARL STORZ devices Monitoring, reporting, and facilitating repair/ exchange transactions Transporting, cleaning/sterilization and packaging of instruments after use Trouble shoot video and instrument issues in the O.R. Instrument/equipment repair management Requirements: A minimum of high school diploma or equivalent Experience in Sterile Processing, Sales, or other Surgical Technology/Medical role Our successful candidate will have excellent written and spoken English language business communication skills. They will also have demonstrated success working in a collaborative, service-oriented team environment. Effective communicator, collaborative, and effective time management Possess exceptional organizational skills and the ability to multi-task MS Office - proficient user as the role will need to work with Excel spreadsheets and reporting Role requires the completion of a drug screening for safety-sensitive positions Must be able to lift/push/pull up to 25lbs Preferred Qualifications: Associate's Degree and/or CRCST certification Key attributes of an exceptional OES: Collaboration: Build strong, respectful relationships with team members, fostering an inclusive work environment and driving process improvements. Critical Thinking & Problem Solving: Analyze situations to understand the "why" and "how," delivering solutions with professionalism. Communication: Engage in clear, concise interactions with customers and colleagues, effectively conveying ideas and information. Customer Service: Create an environment where customers feel valued, respected, and understood, building lasting business relationships. Technical Proficiency: Utilize email, calendars, virtual collaboration tools, and spreadsheets to manage tasks, analyze data, and support business decisions. What is in it for you: Relocation Support: Enjoy generous relocation reimbursement packages to ease your transition. Professional Growth & Development: Receive financial support to obtain industry certifications (e.g., CST, CRCST). Get reimbursed for certification exam fees and study materials. Take advantage of ongoing training and educational opportunities to advance your career. Collaborative & Dynamic Work Environment: Engage in cross-functional collaboration and knowledge sharing. Benefit from regular feedback, recognition, and support for your growth and development. Be part of a team that celebrates successes together. Access to Cutting-Edge Medical Technologies: Work with state-of-the-art medical equipment. Collaborate with leading medical professionals. Contribute to innovative solutions that improve patient care. Who we are: KARL STORZ is an independent, family-owned company headquartered in Germany's renowned MedTech manufacturing region. For 80 years, we've pioneered the most groundbreaking innovations in endoscopic surgery, video imaging, and OR integration to benefit patients and healthcare providers alike. With more than 9,000 associates worldwide and 2,600 in the US, we pride ourselves on harnessing cutting-edge technology, precise workmanship, and unrivaled customer support to help healthcare facilities succeed. With onsite locations and field opportunities across the country, we attract a diverse and talented staff. It's not just about the tools we create-it's about the lives we change, together.

Lead, coach and train a team, providing professional development through ongoing coaching. Safety is of the utmost importance; constantly promote safety throughout the work area and with your team. Responsible for ensuring proper scheduling to run production area. Motivate, train and help the team to optimize performance. Ensure compliance with company policies, and our established food safety programs. Optimize employee engagement through positive leadership. All other relevant duties related to the job of a supervisor. 2+ year leadership and/or supervisory experience required. Bachelor degree in Poultry Science, Animal Science, Business Management, or other related field of study preferred. Excellent interpersonal and communication skills. Proficient technology, computer, mathematical and analytical skills. General knowledge of plant operations, food safety regulations, OSHA guidelines, GMPs and HACCP. Sound work ethic, honesty and moral character.

This is a hybrid role with 50% on-site requirement in Wilmington, MA. We are seeking a highly analytical, self-driven Senior Financial Analyst to join our FP&A team. This role provides broad visibility across the business and requires strong ownership, curiosity, and the ability to thrive in a fast-paced environment. The ideal candidate combines financial experience with the ability to turn data into insights and influence decisions. You will partner closely with senior leadership and cross-functional teams to lead budgeting, analyze performance, and communicate key financial and operational trends. Success in this role requires driving deep into business, challenging assumptions, identifying risks and opportunities, and delivering forward-looking insights that drive results. Responsibilities: The selected candidate will be able to perform the following duties with or without a reasonable accommodation: Business & Financial Analysis Analyze monthly financial results, investigate trends and anomalies, and clearly communicate key performance drivers, risks, opportunities, and recommendations to finance and business leadership. Own portions of the annual budgeting, forecasting, and long-range planning processes. Develop and enhance financial reporting and dashboards that drive business decisions. Business Partnership & Decision Support Build strong relationships with regional and functional leaders across operations, sales, service and other areas. Partner with business leaders to support strategic initiatives and business cases with sound financial analysis. Communicate insights clearly and confidently to senior leadership in both written and verbal formats. Reporting & Modeling Participate in the preparation of the timely and accurate P&L and KPI reporting packages. Support ongoing and ad hoc reporting and analysis requests with a continuous improvement mindset. Develop and maintain financial models to support scenario analysis, forecasting, and strategic planning. Ownership & Initiative Learn the drivers of the business to deepen insights into financial results and future performance. Manage multiple priorities efficiently with minimal direction, while maintaining accountability for quality and deadlines. Continuously look for ways to streamline processes, improve reporting, and drive better decision-making. Qualifications Bachelor's Degree in Finance or Accounting, Economics, or related field. Advanced Excel and financial modeling skills. 5+ years of progressive financial analysis or FP&A experience. Strong analytical and problem-solving abilities with a high level of accuracy, attention to detail, and intellectual curiosity. Proven experience working independently, managing projects, and driving results with minimal supervision. Excellent communication and storytelling skills, including the ability to translate complex data into clear insights. Strong interpersonal skills with demonstrated success building relationships across all levels of the organization. Working knowledge of U.S.GAAP or core accounting principles. Preferred Experience with Oracle EPM, Hyperion, Smart View, Essbase, or similar applications. Experience with SQL querying. Experience with Power BI, Tableau, and/or other data visualization tools. MBA,CPA, CFA or similar advanced credential. Experience supporting senior leadership in a fast-paced, matrixed environment. The estimated annual salary for this position ranges from $82,500- $110,000. Actual compensation will vary based on factors including but not limited to the candidate's skills, experience, and qualifications. Geographic differentials may also apply depending on the position's location. There is no application deadline for this role; recruitment will remain open until the position is filled. UniFirst offers a Fleet of Benefits, 50+ to be exact! 401K with Company Match Profit Sharing Health Insurance Employee Assistance Program Life Insurance Supplemental Life Insurance Long Term Disability Vacation Sick Time Paid Holidays Direct Payroll Deposit Tuition Reimbursement 30% Employee Discount Employee Referral Program Where will a UniFirst Career take you? As an industry leader in the rental, lease and sale of uniforms and facility services products, UniFirst Corporation has grown to become one of the largest companies in the garment services industry. UniFirst is recognized on the Forbes “Platinum 400 - Best Big Companies” List. With over 14,000 employee Team Partners and more than 250 facilities throughout the United States, Canada, Mexico and Europe, you are never just a number when you work for UniFirst. What sets us apart from all other companies is that we still function as a family run business. When you work for UniFirst, you're family! UniFirst Corporation has a strong history of promoting from within. In fact, most of UniFirst's Senior Managers have come from within the Company. Opportunities are endless for those individuals who possess a strong work ethic, a commitment to quality, and above all else, a passion for delivering quality customer service, both internally and externally. Our culture is what makes UniFirst an organization that stands out from the rest. Are you interested in loving your job? Find out just how far a career with UniFirst can take you. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Mentor Employment Status: Hourly Full-Time Function: Maintenance Req ID: 26434 PURPOSE: Move, build, install, and demolish electrical panels, equipment, and power and network services. Primarily 1st shift schedule could include 2nd, 3rd, split shifts, weekends, holidays, 12 hour shifts. Daily work activity is directed by the Group Leader and a Construction Electrician A. Reports directly to the department Manager. JOB DESCRIPTION (DUTIES AND RESPONSIBILITIES) Performs all tasks under general supervision. Provides training and assistance to less experienced Electricians. Build electrical panels and test panels for production equipment to print. Performs installations and demolition on buildings, mechanical equipment and utility systems using one or more trade skills (e.g., electrical, mechanical). Maintains current knowledge of all applicable procedures and safety measures. Installs and replaces electrical circuits, equipment and appliances, using hand tools and testing instruments, to supply electrical power for lighting, equipment, and machine operations. Provide power and control wiring for new equipment installations and equipment upgrades. Assist in commissioning of newly installed or upgraded equipment. Responsible for safely demolishing unused equipment and services. Oversee construction contract and service work as assigned. Order construction material as required. Assist with keeping neat and orderly records on work performed. Work with Engineering, Production Team Leads, Managers, Group Leaders, and fellow tradesmen to accomplish the desired result. Adjust schedule and work hours to accomplish the desired result, must be able to work weekends and holidays as required. Perform work assignments efficiently while being consistent with good safety practices. Report any maintenance and/or safety issues to supervisor. Review, understand, and follow all Company specifications and procedures, and regulatory rules and requirements that are associated with the performance of this job. Other duties as assigned by the department Manager. Assumes additional responsibilities as needed or directed in support of the Company's 2025 Strategy. BASIC REQUIREMENTS Must have successfully completed an Electrician Apprentice Program, an Associate degree in Electronics/Electrical Technology or have equivalent job experience. Must pass the skilled trade assessment for this position. Must have a basic level of knowledge and experience reading wiring diagrams and engineering drawings. Must have a basic level of knowledge and experience in panel installation and wiring practices. Must have a basic level of knowledge and experience in proper conduit materials, methods, and installation. Must have a basic level of knowledge in the National Electrical Code (NEC) Ability to use various measuring devices (multi-meter, tape measure, levels, plumb bobs, etc.) Excellent attendance required. Must possess basic mechanical aptitude. Must possess good organizational and communication skills. Team oriented, self-motivated, safety and quality conscious; requiring minimal supervision. Capable of lifting up to 75 pounds on an occasional basis. May be required to operate basic shop equipment (hoist, forklift, scissor lift, etc.) Must be able to work in confined areas, climb ladders, and work at heights of 50 feet. Must be able to wear a respirator. Must be able to distinguish colors used in color-coding wires and electronic components. Must be willing to continuously improve technical skills and knowledge. Must be able to understand and interpret the specifications and procedures related to this job. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Pay Range: ($68,300.00 - $109,300.00) Target Bonus: % Req ID: 27257 What You Will Do As an Electrical Engineer, you will collaborate in a team environment to design and support industrial electrical systems, which includes various types of equipment new and old. Specific responsibilities include: Engineer solutions to improve equipment reliability, safety, ergonomics, and compliance with ISO 14001, ISO 450001, and other EHS initiatives. Provide technical support to Production, Maintenance, and IT departments, reducing downtime and improving system performance. Develop, design, and update PLC, VFD, and HMI programs using various control automation platforms, including Rockwell, Siemens, and Beijer. Update and maintain National Instruments LabVIEW code for testing applications and equipment. Interface with engineering, manufacturing, maintenance, IT, MES, and Production teams to support facility projects. Apply NEC knowledge for planning industrial equipment installations and work with electricians to update documentation. Supply project leaders with capital cost estimates and timelines, and review capital equipment quotations. Lead projects or project steps, solve complex problems, and act as a resource for colleagues with less experience. Manage outside engineering and construction personnel, ensuring all safety, health, environmental, and compliance aspects meet regulations. Integrate equipment into data collection systems and establish network topologies. Support network backup, device patching management, and control system asset inventory. Compile data from connected devices for organizational use and develop standards for control systems hardware and software. Identify and assume additional responsibilities for projects and processes that align with and drive towards Lincoln Electric Company's 2025 Higher Standard Goals. Education and Experience Requirements This position is posted as a range, candidates with varying levels of experience and qualifications are encouraged to apply. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experience. Minimum requirements, Engineer II - Bachelor's degree in electrical engineering with 3+ years of professional relevant engineering experience. Experienced Professional - Has working knowledge and experience in own discipline Continues to build knowledge of the organization, processes and customers Performs a range of mainly straightforward assignments Uses prescribed guidelines or policies to analyze and resolve problems Receives a moderate level of guidance and direction Engineer III - bachelor's degree in electrical engineering with 5+ years of professional relevant engineering experience Senior "Go To" / Career Level Person - Has in-depth knowledge in own discipline and basic knowledge of related disciplines Solves complex problems; takes a new perspective on existing solutions Works independently; receives minimal guidance May lead projects or project steps within a broader project or have accountability for ongoing activities or objectives Acts as a resource for colleagues with less experience May represent the level at which career may stabilize for many years Engineer IV - bachelor's degree in electrical engineering with 8+ years of professional relevant engineering experience. Lead/Specialist - Is recognized as an expert in own area within the organization Has specialized depth and/or breadth of expertise in own discipline or function Interprets internal or external issues and recommends solutions/best practices Solves complex problems; takes a broad perspective to identify solutions May lead functional teams or projects Works independently, with guidance in only the most complex situations Experience Experience with AutoCAD Electrical CAD software. Experience with PLCs, HMIs, VFDs, and test equipment, including Rockwell Automation software, Siemens software, and National Instruments LabVIEW. Knowledge of NFPA 70, 70E, and 79, and other technical codes. Knowledge of basic networking concepts and SQL Database. Skills Demonstrate initiative and accept responsibilities with minimal supervision. Strong ownership and results-driven mindset. Good judgment, self-motivation, and safety consciousness. Excellent organizational skills. Superior written and oral communication abilities. Adaptability to handle diverse assignments and changing priorities. Hands-on work capability and effective collaboration on the shop floor. Critical thinking and exceptional problem-solving skills. Proficiency in supporting and troubleshooting industrial equipment. Flexibility to work off shifts, travel between facilities in Northeast Ohio, and as required. Effective teamwork with employees at all organizational levels. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

. Supervise immediate and short-term maintenance goals. Assign work orders and ensure completion of repairs. Perform lock out/tag out certifications on equipment. Recognize and reward Technicians, while counseling performance issues. Perform safety checks. Provide mentorship, motivation, training and professional development, helping your team to optimize their performance and growth. Assign work orders, and follow up ensuring completion. Manage and oversee required paperwork. All other relevant duties to the job. 3+ years supervisory experience within a manufacturing maintenance environment required. 5+ years maintenance experience in a manufacturing environment required; preferrably within a poultry manufacturing facility. Excellent leadship skills with ability to provide positive reinforcement.

Monitor workplace conditions and employee performance enforcing safety policies and procedures. Perform plant and safety evaluations, analysis and audits. Administer OSHA Required Programs and training. Assist with Worker Compensation program. Conduct accident/injury investigations with supervisors. Test the Emergency Protection Systems as necessary and maintain documentation. Participate as a member of the Process Safety Management Program and Risk Management Plan teams. Perform and document Job Safety Analysis (JSA). Work with Supervisors to ensure all On the Job Training emphasizes Safety First. All other relevant duties to the job. Bachelor Degree in an environmental or health related science preferred. Knowledge of OSHA regulations and other general industry safety practices. 3+ years of safety experience within a similar work environment required. OSHA 10 and OSHA 30 certifications preferred. Excellent interpersonal communication skills. Proficient technology and computer skills, including MS Office based programs.

Lee Company offers complete facility solutions services of HVAC, plumbing, electrical, and preventative maintenance for commercial facilities throughout Tennessee, Alabama, and Kentucky. Our incredible team has built their reputation on trust, honesty, employee safety and excellence since 1944. Summary of Job: The HVAC Maintenance Team Lead 3 will perform Maintenance inspections and ensure all maintenances are completed per the contract/filter belt list. Education and Experience: Universal EPA Certification Minimum of 8+ years of Commercial HVAC Service experience preferred High school diploma or equivalent GED certificate preferred Skills and Abilities: Excellent written communications skills Able to work well with other technicians and tradesman Company Perks & Benefits: Our mission at Lee Company is to create a workplace where our employees can thrive, and we back that up with action. Wellness isn't just about your physical health; it's about your finances, career, community, and relationships too. We don't just talk the talk; we walk the walk. Check out the benefits that help our team live well and work well every day! Physical: Comprehensive health, dental, and vision insurance, plus on-site and mobile health clinic services. Financial: Earned Wage Access (EWA) - access a portion of your earned pay before payday, 401(k) company match, HSA contributions, and company-paid life and long-term disability insurance. Community: Company-supported volunteer opportunities to make a real impact. Career: Free trade training through Lee Company University (LCU), paid time off (PTO), and career growth opportunities. Relational: Paid time off (PTO), holidays, and Chaplain services for support when you need it. At Lee Company, you will be among the most knowledgeable and experienced trade experts in the country. We offer competitive pay, full benefits, paid training, and opportunities for growth. If you have a desire to serve and a passion for excellence, apply today! Lee Company is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate on the basis of race, color, religion, gender, age, national origin, veteran status, disability, genetic information or testing, or family and medical leave. Lee Company is an E-Verify employer. Candidates must be legally authorized to work in the United States. At the time of hire, employees will be required to provide proof of employment eligibility.

This position will support the Commission Department and report to the Sales Commission Supervisor. The ideal candidate will be very organized with an analytical mindset and attention to detail. Strong Excel knowledge along with the ability to multi-task. This position will research, verify, and validate that all sales credit and commission payout comply with Corporate Policy and Compensation Plans. Review sales commissions for accuracy and compliance to Corporate Policy and Compensation Plans Work directly with Sales Managers and/or Location Managers to resolve any issues Analyze credit and commission data on a weekly basis to provide forecast models and various reports Calculate qualifying sales for monthly commission payout Meet deadlines in timely manner Perform account reconciliations as needed Ensure all supporting backup is verified to accurately payout commissions Utilize multiple databases to ensure accuracy of commissions Respond to sales inquiries in a timely manner Excellent written and verbal communication skills Organized, strong follow up skills Able to work independently and exercise discretion Attention to detail Other duties as needed Qualifications Experience: Strong Microsoft Excel abilities (pivot table, vlookups) Familiarity with the AS/400 system is a plus Accounting background a plus Education: Bachelor's Degree preferred Additional Requirements: Able to multi-task while meeting deadlines. Must be accurate with numbers. Work independently and exercise discretion. The estimated annual salary for this position ranges from $58,000 to $62,000. Actual compensation will vary based on factors including but not limited to the candidate's skills, experience, and qualifications. Geographic differentials may also apply depending on the position's location. There is no application deadline for this role; recruitment will remain open until the position is filled. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22821 Employment Status: Hourly Full-Time Function: Maintenance Req ID: 27095 Purpose Ability to machine, mill, and grind various types of metals. Primarily 1st shift schedule, could include 2nd, 3rd, split shifts, weekends, holidays, 12 hour shifts. Daily work activity is directed by the Group Leader and a Maintenance Machinist A. Reports directly to the department Manager. Job Responsibilities Performs all tasks under general supervision. Provides training and assistance to less experienced Machinists. Assumes ownership of work task and demonstrates initiative to get work completed. Creates and reworks machinery and equipment components according to requisition documentation, blueprints, or other drawings. Sets up equipment operation feed, speed and temperature. Follows established procedures for operating various conventional and/or CNC (computerized numerical control) manufacturing equipment for tasks such as cutting, punching, forming, drilling, tapping, turning, milling, grinding, and stamping to fabricate, form or shape manufactured parts, tools or parts assemblies from raw materials. Selects and measures raw materials and parts to specifications to prepare for production processing. Performs reworking and machining of new and spare production parts for departments. Repairs maintenance parts as needed. Verifies the accuracy of work by using calipers, micrometers, dial indicators, and various measuring instruments. Order and maintain project related material as required. Assist with keeping neat and orderly records on work performed and repairs made. Work with Engineering, Production Team Leads, Managers, Group Leaders, and fellow tradesmen to accomplish the desired result. Adjust schedule and work hours to accomplish the desired result, must be able to work weekends and holidays as required. Perform work assignments efficiently while being consistent with good safety practices. Report any maintenance and/or safety issues to supervisor. Review, understand, and follow all Company specifications and procedures, and regulatory rules and requirements that are associated with the performance of this job. Other duties as assigned by the department Manager Basic Requirements Must pass the skilled trade assessment test for this position. Must have a basic knowledge and experience reading mechanical drawings. Must have a basic knowledge and experience in proper machining and grinding techniques (Feed rates, sequencing, cutting speeds). Must have a basic knowledge and experience in setting up machine tools to produce precision parts. Must have a basic knowledge and experience in writing and modifying machine programs. Must be able to use math to calculate dimensions and determine speeds and feed rates. Ability to use various measuring devices (calipers, micrometers, dial indicators, etc.) Excellent attendance required. Must possess basic mechanical aptitude. Must possess good organizational and communication skills. Team oriented, self-motivated, safety and quality conscious; requiring minimal supervision. Capable of lifting up to 75 pounds on an occasional basis. May be required to operate basic shop equipment (hoist, forklift, scissor lift, etc.) Must be able to work in confined areas, climb ladders, and work at heights of 50 feet. Must be able to wear a respirator. Must be willing to continuously improve technical skills and knowledge. Must be able to understand and interpret the specifications and procedures related to this job. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experiences Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

HIRING FOR DAY SHIFT AND NIGHT SHIFT, 12 HOUR ROTATING SHIFTS. Work with a team to ensure equipment is operational. Perform daily preventative and predictive maintenance on equipment. Record and document maintenance performed. Maintain cleanliness of maintenance shop. Follow proper lock-out/tag-out procedures. Assist to ensure adherance to all company, state and federal regulations. All other relevant duties to the job. Manufacturing equipment repair experience required. Ability to replace basic component parts on equipment. Mechanical diagnostics and repair experience. Knowledge of wire belt and plastic conveyor repairs, and sprocket alignment and installation.

Build your Career with an Industry Leader As the global leader of premium labels, MCC helps brands stand out in competitive markets and inspire positive consumer experiences. Backed by over a century of printing experience, MCC is focused on the future by developing consumer-driven innovations and sustainable packaging solutions. Working for our team, you can truly make a difference. The Planning Manager is responsible for overall site production operations. Creates a work environment which promotes safety, quality, delivery, and cost-effectiveness. Effectively develops teams that can achieve corporate improvement objectives. Accountable for all aspects of plant production performance while ensuring objectives are attained in a cost-effective manner. Drives best practices through the organization and leads process improvement. Why work at MCC: Comp: $85,000-100,000k/yr This is a Dayshift Position Generous benefits package including medical, dental, vision, disability, life insurance and 401(k) Paid Holidays: New Years, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Day after Thanksgiving, Christmas Eve, Christmas Day, plus two floating holidays Responsibilities: Directly, and through delegation, coordinates activities required to assure safety, quality, delivery, and cost meet specified targets. Assures the compliance of behavior-based safety initiatives and continuously improves safety performance. Executes quality control plans for compliance to standards and drives variation reduction within the process. Assesses on-time delivery performance and develops actions to improve and sustain high level of performance. Holds direct responsibility for managing cost by effective management of labor, overtime, and expenditures. Determine staffing requirements weekly and re-deploy resources during the week as needed to address any shifting staffing needs or changes in priorities and scheduling. Reviews and analyzes production reports to determine root causes of variance from budget, and develops and executes corrective actions, using structured root cause analysis, MDI and Policy Deployment methodologies. Using Lean principles, form teams and involve people to improve productivity, decrease lead times, reduce waste and attain customer quality requirements. Reviews and analyzes production reports to determine root causes of variance from budget and develops and executes corrective actions. Recommend and initiate cost reduction programs centered around capital improvements where ROI and pay back criteria are favorable. Promotes, prepares, and participates in kaizen activities. Sustains results. Facilitates the execution of daily Gemba walk by assuring the proper utilization of hour-by-hour, SQDC boards and War Room tools. In conjunction with Human Resource Manager, coordinates appropriate “required to operate” and “required on roles” staffing levels. Directs the efforts of plant supervision to ensure the consistent application of human resource policies, procedures, and plant rules. Assures adherence to safety accountability guidelines. Coaches and mentors team members to assure their ongoing development Stays abreast of new trends and developments in methods, techniques, equipment, tools, materials, and supplies, which might be incorporated into the production process to increase efficiency or better use of resources. Researches and recommends capital equipment purchases. Participates in special projects and performs other duties as assigned. Qualifications: A hands-on leader that is a role model with high integrity, positive influence, and strong business acumen that embraces change, possesses a continuous improvement mindset, and has a passion for exceeding customer and company expectations. Degree in Engineering, Industrial Technology or Business or equivalent 10 years of staff level leadership experience. Minimum of 7 years' experience in Operations and/or Lean Management. Printing industry experience is preferred. Experience in being a change agent in complex transformational activities. Significant experience in implementation of Lean principals as they apply to manufacturing operations. Ability to apply structured problem-solving methodologies to determine root cause of problems and provide effective countermeasures. Excellent communication skills Advanced excel skills Diversity & Inclusion: MCC fosters an inclusive culture that respects and embraces our teammates' diverse backgrounds and experiences, so that everyone can achieve their full potential here. We aspire for our company to truly reflect the diversity of our customers and the markets we serve. We are committed to equal opportunity for everyone, regardless of peoples' gender identity/expression, age, language, sexual orientation, ability, race, socioeconomic status, national origin or other characteristics. #LI-ML1 #appcast For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ***************** If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

THIS IS A 2ND SHIFT POSTION. Deliver feed between feed mills, growers and other required destinations. Perform pre-trip inspections to ensure the safety of your loads. Comply with established Company fueling procedures. Communicate with dispatchers on a regular basis. Comply with DOT, company, biosecurity, FSMA, local, state and federal laws, policies, practices and procedures. All other relevant duties to the job. Class A Commercial Driver's License required. 1+ year(s) verifiable commercial driving experience required. Clean motor vehicle driving record required.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Fort Loramie Req ID: 27825 Job Responsibilities Position Summary: Assist Electrical Project Engineers and Designers in completing their assigned tasks. Role qualifications: • Must be familiar with Company quality objectives and play an active role in reaching continuous improvement objectives. • Focus on design and development. Position responsibilities: • Component and/or schematic drawing creation. • Assist in creating and assembling Service Manuals. • Revising and updating of drawings. • Provide technical assistance to Estimating, Sales, Production and Service as required. • Provide assistance to other departments (Service, Shop, etc.) as required. • Work well with Machine Builders/Electricians, Management, and support functions. Job Requirements Essential skills and experience: • High School Degree or GED or attending skills trade school. • Pursuing a Technical or Bachelor Degree • Commitment to company values • Educational, training, and experience requirements may be modified at the Managements Team's discretion Nonessential skills and experience: • Safety (OSHA STDS) Environmental, Health & Safety (EH&S) • Understand the Company's EHS Policy and how it relates to this job. • Be aware of OSHA & EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. • Work in a safe and environmentally friendly manner and observe all company EHS procedures. • Know that the company EHS procedures are located on the ISO drive. • Immediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS procedures. • Attend required EHS training Physical demands and work environment: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Physical demands: While performing duties of job, employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk and hear. Repetition with activity; computer work. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. • Work environment: The noise level in the work environment is usually moderate. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 26250 Employment Status: Salary Full-Time Req ID: 27769 Primary Function Supports sales and estimating activities in the Defense industry segment with a particular emphasis on the U.S. Navy, in particular replacing cast and forged components with additively manufactured components, by fostering key customer relationships, identifying new business opportunities and customers, creating proposals and quotes, negotiating and closing sales, and maintaining knowledge of current market conditions and technologies. Job Duties Interact with customers, sales, estimating and engineering team members to generate quotes, and maintain customer relationships. Assist in reviewing DOD contracts and technical publications/specifications. Use state-of-the-art CAD and additive manufacturing software in support of accurate quote estimates. Actively manage incoming leads and follow-up, maintain digital distribution list. Manage Additive Salesforce relationships, leads, and opportunities. Maintain database of new contacts, accounts and opportunities. Create dashboards and issue periodic reports. Assist in market research and outreach: identifying promising markets and engaging the customer base in those markets, develop sales tools content. Assist Marketing with trade show planning, setup and participation as required, as well as content for brochures, articles, social media, etc. Possess a strong understanding of our value proposition, product offering, our competition in the industry, and positioning. Follow the latest industry developments and stay up to date on competitors. Assumes additional duties as needed or directed in support of the Company's 2025/2030 Strategies. Requirements U.S. citizen. Bachelor's degree required, Engineering preferred. 3+ years proven track record in engineering sales or related market. Previous experience in welding, additive manufacturing or related fields preferred. Demonstrated communication skills - verbal and written. Computer literate with working knowledge of MS Office (i.e. Word, Excel, PowerPoint) and CAD (e.g. Solidworks, Autodesk, etc). Familiarity with CRM tools is a plus Technical skills required to understand and propose products or solutions by focusing on client requirements, including well-versed in welding metallurgy, mechanics of materials, and material/process technical specifications. Ability to communicate information, whether technical or non-technical to staff members and customers, in a clear and concise manner. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lead, coach and train a team, providing professional development through ongoing coaching. Safety is of the utmost importance; constantly promote safety throughout the work area and with your team. Responsible for ensuring proper scheduling to run production area. Motivate, train and help the team to optimize performance. Ensure compliance with company policies, and our established food safety programs. Optimize employee engagement through positive leadership. All other relevant duties related to the job of a supervisor. 2+ year leadership and/or supervisory experience required. Bachelor degree in Poultry Science, Animal Science, Business Management, or other related field of study preferred. Excellent interpersonal and communication skills. Proficient technology, computer, mathematical and analytical skills. General knowledge of plant operations, food safety regulations, OSHA guidelines, GMPs and HACCP. Sound work ethic, honesty and moral character.

Who we are- Transcat is a dynamic, innovative, growing company that has been recognized as the leading calibration and compliance services provider in North America and beyond. With over 1,000 employees-in technical, consulting, operational, sales, finance, and corporate roles-we have stood the test of time by delivering on our Trust in Every Measure promise to our customers in vital industries, including life sciences, aerospace, defense, energy, and utilities. We fulfill this promise through our employees, who live Our Values every day, the Transcat Way. Our employees are at the center of the rewarding, challenging, and life-changing work we do for our customers and those they serve. Are you ready to join a company where the work you do makes a difference, and where you can grow in your career? Here's what Transcat has to offer- Work that matters. A values-based culture where people care about each other and the work they do together. Flexibility Training and development to accelerate learning and career advancement. Competitive compensation and benefits, including paid time off, health insurance, tuition reimbursement, retirement, stock purchase plan, and MORE! This technician will have the ability to calibrate higher-level equipment and calibrate equipment across a minimum of three disciplines (or have an expert level of knowledge/calibration experience in one to two disciplines). Responsibilities Duties and Responsibilities Responsible for providing calibration services for test equipment primarily in the field of RF and Electrical metrology. Work with other technicians within the lab to learn calibration fundamentals, which can include measurement, temperature, electronics, etc. Identify and utilize appropriate measurement techniques Maintain calibration standards Perform calibration work within a laboratory setting and/or while supervised at a customer on-site Fulfill duties safely under working conditions, in keeping with Company requirements and standards Other duties as assigned Required Knowledge, Skills, and Abilities: Genuine interest in RF and Electrical metrology, in order to become an expert. Experience with RF test equipment such as spectrum analyzers, network analyzers, signal generators, and attenuators Experience with test equipment such as oscilloscopes, power supplies, multi-meters, thermometers is an asset Good repair and troubleshooting skills Willing to perform extensive calibrations at customer sites Qualifications Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit and talk or hear. Specific vision abilities required by this job include close vision, color vision and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. Equal Opportunity and Non-Discrimination Transcat is an equal-opportunity employer and prohibits discrimination based on any protected status. As required by United States law, all qualified applicants will receive consideration for employment without regard to age, color, disability, genetic predisposition or carrier status, national origin, race, religion, sex (including pregnancy, sexual orientation, and gender identity), status as a protected veteran, or as a member of any other protected group or activity under federal, state, and local law. We will make reasonable accommodations for employees with disabilities to enable them to perform the essential functions of their position unless doing so poses an undue hardship to the company or a direct threat to health or safety. Contingencies All offers of employment are contingent upon successfully completing all pre-employment requirements, which include verification of identity and employment eligibility, and when applicable, a motor vehicle driving record report.