Process Technician jobs at TriMas - 2265 jobs

TITLE: PLATING PROCESS TECHNICIAN FLSA STATUS: NON-EXEMPT A SHIFT: MONDAY THRU WEDNESDAY AND EVERY OTHER THURSDAY 6:00 AM TO 6:00 PM REPORTS TO: DIRECTOR, PLATING PROCESS ENGINEERING Under the direction of the Director of Plating Process Engineering, the Plating Process Technician provides support to the engineering teams in the plating area, including assisting with wet etch process, preparing and maintaining recipes, reviewing and documenting process or procedures, and expediting and dispositioning prototype wafers; maintains process controls using Statistical Process Control (SPC), collects and analyzes data, and recommends corrective action. This position is located in Milpitas, California. ESSENTIAL FUNCTIONS: Provides support to the engineering teams in the plating, wet etch, and stripping process areas Supports the plating, wet etch, and stripping processes by preparing, maintaining, and setting up recipes to ensure an efficient and consistent process Reviews and documents processes and procedures; partners with engineering to implement changes effectively Expedites and dispositions prototype wafers in the plating, wet etch and stripping areas Assists engineers to run plating process development experiments, collects and analyzes data, and recommends corrective action if required Reviews and maintains process controls using SPC and prepares charts and graphs Assists with routine trouble-shooting and resolves basic process-related issues Participates in and recommends modifications to procedures or processes in support of continuous improvement initiatives Collaborates with Engineering to qualify or approve new processes or procedures Creates reports, charts, or graphs on an ad-hoc or routine basis Prepares daily pass down report for engineers, next shift plating process technicians, and manufacturing plating technicians Responds to inquiries from other team members, managers, or departments Adheres to all safety policies and procedures as required Performs other duties of a similar nature or level* MINIMUM QUALIFICATIONS: Associates degree in Electronics or Industrial Technology and/or equivalent relevant experience Two years of experience working in the semiconductor industry Knowledge of plating, wet processes and procedures Hands on experience using metrology tools such as pH meter, Tencor Thickness Profiler, XRF, and B-H loop tools Proficient in the use of Microsoft Office Applications Required Knowledge, Skills, and Abilities: Knowledge of semiconductor or hard disk drive (HDD) principles and processes Knowledge and ability to use SPC to maintain process controls Knowledge of plating, wet processes and procedures Ability to collect and analyze data, present findings, and recommend corrective action Ability to adhere to all safety policies and procedures Ability to communicate effectively with all levels of employees and management Demonstrated ability to follow routine verbal or written instructions Demonstrated problem solving and organizational skills Demonstrated time management and prioritization skills Skilled at resolving issues quickly and efficiently Flexible and able to prioritize The hourly rate for this full-time position is between $25.00-$40.00 + bonus target + benefits. Within the range the individual pay may differ depending on additional factors including job responsibilities, job related knowledge, skills, abilities, education, and experience. The hourly pay range shown is subject to change and may be modified periodically. WORKING CONDITIONS: The Plating Process Technician works primarily in an indoor environment on A shift which is Monday thru Wednesday and every other Thursday 6:00 AM to 6:00 PM. The schedule may be altered from time-to-time to meet business or operational needs; may travel from building-to-building as needed. Works in a class 100 ESD sensitive wafer manufacturing facility; wears a cleanroom (bunny) suit, including hood, gloves, safety glasses, booties, and mask. May be exposed to hazardous conditions, chemicals, fumes, and/or gases during the course of work day; Stands and walks; performs various fine grasping movements, bends, and twists; operates a computer and enters information using a keyboard, operates a telephone, and other office equipment. Must be able to load and unload various wet etch chemical solutions several times per shift. May be required to push, pull, or lift up to 25 pounds. *Other duties of a similar nature or level are duties that may be required, but may not be specifically listed in the job description or posting. TDK/Headway Technologies, Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, national origin, age, disability, or genetics. Applicants requiring accommodation in order to complete the application process should contact the Headway Human Resources Department.

ParkDecoratorsfabricatedecorationsandsetsfortheKnott'sBerryFarmresort,Knott's Berry Farm Hotel and Soak City For the various seasonal events throughout the year.As well as decorate restaurants, rides and merchandise locations on the resort. Park Decorator roles may include and is not limited to one of the following positions: Window Display Designer/Installer, Floral Design, Scenic Painting, or Seasonal Holiday Decorator. Salary Details: $26.86 / hr Responsibilities: Daily inspection and Maintenance of Permanent installations of theresort. Daily inspection of Current seasonal dcor installed in theresort. Fabricate new dcor for seasonal events. Refurbish existing dcor for seasonal events. Inventory andmaintainshop. Install dcor for seasonal events. Strike dcor for seasonal events. Qualifications: High school diploma / GED required. Associate's degree / vocational or technical school degree, emphasis in Theatrical Design/visual Display preferred. At least 1-2 years of prior, relevant work experiencepreferred. User of basic hand toolsand power tools,gluesand adhesives.Floral design helpful.Ability to sketch and convey design concepts. Basic Scenic painting skills preferred. Must be able to work nights, weekends, and holiday based on business needs.

Help grow a safer, cleaner, healthier future for everyone, every day. Job Title: Technical Production Operator FLSA Status: Hourly (non-exempt) Level: Operator Level 2 Key Responsibilities: Assembly Assemble and solder electronic components for gas leak detectors with precision, following schematics and IPC standards. Use hand tools, soldering equipment, and small parts to assemble the product to exact specifications. Operate and calibrate specialized tools and test equipment. Testing & Troubleshooting Diagnoses and troubleshooting assembly and performance issues, making necessary adjustments or repairs. Collaborate with engineering and quality teams to resolve recurring issues and refine processes. Quality Assurance Conduct quality inspections at various stages of the assembly process, ensuring each product meets company and regulatory standards. Document assembly activities, test results, and any defects found during testing or assembly. Perform in-process inspections and identify quality issues proactively. Process & Safety Compliance Follow ISO-certified manufacturing processes and adhere to all safety guidelines. Support root cause analysis and suggest process improvements Participate in periodic ISO audits and continuous improvement initiatives. Team Collaboration Collaborate with engineering or quality teams to resolve technical issues Communicate effectively with supervisors and cross-functional teams about production status, equipment needs, and improvement opportunities. Required Skills & Qualifications: High school diploma or equivalent; technical certification or vocational training in electronics or assembly preferred. Minimum 2 years of experience in an assembly or manufacturing environment, preferably in electronics or small devices. Ability with hand tools, soldering, and testing equipment. Ability to read technical drawings and schematics Basic understanding of electrical systems and calibration procedures, Familiarity with ESD protocols and IPC standards a plus. Strong attention to detail and commitment to quality. Initiative-taking approach to finding and solving problems. Physical Requirements: Ability to sit for extended periods and perform repetitive tasks. Manual dexterity for handling small parts and precise assembly work. Ability to lift to 25 lbs. regularly. Additional Requirements: Willingness to work in a collaborative, fast-paced production environment. Ability to adapt to changing production demands and work overtime as needed. Work Schedule: Hourly position 40-hour work week 8-hour shift, longer hours when needed Monday to Friday, 6:00am to 2:30pm Equal Opportunity Employer: Sensit is committed to providing a workplace free from discrimination or harassment. We expect every member of the Sensit team to do their part to cultivate and support an environment where everyone can feel included and is afforded the respect and dignity they deserve. Decisions related to hiring, compensating, training, evaluating performance, or terminating are made fairly, and we give equal employment opportunities to all qualified candidates and employees. We strive to create an inclusive environment that makes every employee and candidate feel welcome. At-Will Employment: Employment with Sensit is at-will and may be terminated by either party at any time, with or without cause or notice. Pre-employment screening is part of our application process. Must be authorized to work in the U.S. To find out more about Sensit Technologies LLC, visit us at ***************************************** Not the right fit? Let us know you're interested in a future opportunity by clicking Introduce Yourself in the top-right corner of the page or create an account to set up email alerts as new job postings become available that meet your interest!

Job descriptions may display in multiple languages based on your language selection. What we offer: At Magna, you can expect an engaging and dynamic environment where you can help to develop industry-leading automotive technologies. We invest in our employees, providing them with the support and resources they need to succeed. As a member of our global team, you can expect exciting, varied responsibilities as well as a wide range of development prospects. Because we believe that your career path should be as unique as you are. Group Summary: The Magna Exteriors portfolio of products includes access systems such as liftgates, exterior trim, modular systems, front-end modules including fascia, active aerodynamic systems and other lightweight structural components for automotive, commercial truck and other industrial markets. Recognized globally as an innovator in all aspects of vehicle exteriors, Magna provides everything needed, from materials development and design through manufacturing and assembly, to help automakers create sleek, state-of-the-art vehicles across the world. Job Responsibilities: JOB SUMMARY: As a Manufacturing Process Technician at Magna Engineered Glass, you will provide essential technical support to our production team throughout all manufacturing phases. Your role includes actively participating in continuous improvement initiatives aimed at reducing cycle times and minimizing downtime due to setup, change-overs, processes, and tooling. ESSENTIAL JOB DUTIES AND RESPONSIBILITIES: * Performs start-up and shut-down of plastic injection molding machines and ensures that all sub systems (i.e., water, materials, heaters, robots, etc.) are operational. * Debugs and troubleshoots injection molding process problems for new or existing products to continuously improve part quality and yields. * Minimize downtime related to die changes and process setup. * Swiftly respond to issues or concerns raised by the production team. * Document process adjustments correctly. * Develop and revise processes for new programs. * Conduct end-of-arm-tooling setup, troubleshooting, and continuous improvement. * Handle hazardous waste material responsibly. * Participate in cleaning and preventive maintenance tasks. * Contribute to problem-solving and continuous improvement activities. * Participate as an authorized member of the facility spill response team. * Maintain compliance with health, safety, and environmental policies and regulations. Level 1: * Basic troubleshooting of equipment and processes, including injection molding, dispense systems and assembly fixtures. * Primary responsibility for mold changeovers. * Take ownership of process documentation * Navigate the Human Machine Interface (HMI) * Complete preventative maintenance activities as assigned or directed. * Familiarity with pneumatic systems and equipment. Level 2: * Same as above, plus: * Advanced troubleshooting of equipment and processes * Develops and documents standardized processes for various operations. * Basic repair of manufacturing fixtures and equipment. * Basic troubleshooting of vision systems, sensors and robotics. * Troubleshoot glass breakage in molding processes. * Complete projects with some supervision. Level 3: * Same as above, plus: * Recommend changes for improved efficiencies to the Engineering department. This includes but is not limited to tool modifications, robotics, and injection molding machine process changes. * Conducts and plans tests and experiments which may require minor modifications in equipment setup and/or process parameters. * Advanced development of manufacturing processes for new products. * Complete projects independently, with minimal supervision. * Troubleshoot molding machine hydraulic systems. * Interpret mechanical drawings as needed to troubleshoot equipment. REQUIREMENTS: Level 1: * 3-5 years of experience working in a technical role in a manufacturing environment. * Ability to troubleshoot, update, and work on equipment and systems in the area of responsibility. * Strong interpersonal skills and effective written and verbal communication abilities in English. Level 2: * 1-2+ years of experience working at Level 1 or a similar role, or a combination of relevant education and experience. * Proficiency in injection molding, with preference given to experience with RJG systematic molding. * Strong interpersonal and written/verbal communication skills. * Ability to work independently and in a team, demonstrating professionalism at all times. Level 3: * 3-5+ years of experience at Level 2 or a similar role, or a combination of relevant education and experience. * Proficiency in ABB Level 1 Robot training. * Demonstrated strong teamwork capabilities and excellent professionalism. * Proficient project management and problem-solving skills. * Ability to set direction and work with minimal supervision. * Advanced injection molding skills, with preference given to experience with RJG Advanced Edart and Master Molder 1. PHYSICAL DEMANDS: While performing the duties of this job, employees are required to: * Frequent verbal communication in a manufacturing environment * Stand, walk, bend, kneel, stoop, crouch, crawl, and climb throughout the day. * Frequently lift and/or move items weighing over 50 pounds. Awareness, Unity, Empowerment: At Magna, we believe that a diverse workforce is critical to our success. That's why we are proud to be an equal opportunity employer. We hire on the basis of experience and qualifications, and in consideration of job requirements, regardless of, in particular, color, ancestry, religion, gender, origin, sexual orientation, age, citizenship, marital status, disability or gender identity. Magna takes the privacy of your personal information seriously. We discourage you from sending applications via email or traditional mail to comply with GDPR requirements and your local Data Privacy Law. Worker Type: Regular / Permanent Group: Magna Exteriors

Be part of something bigger! As the world and the way people live is changing, we at Bekaert believe it's our responsibility to contribute to finding new solutions for the future. With a 140+ year old heritage of excellence, innovation, and a future-focused mindset, we strive to create value for our customers and society. We aim to do this through innovative solutions and sustainable practices. We are committed to pushing the boundaries of steel wire transformation and coatings whilst also leveraging our expertise to develop innovative solutions with new materials and services in a safe, smart, and sustainable way. Our focus extends to markets such as new mobility, low-carbon construction, and green energy. As a dynamic and growing company with over 24 000 employees worldwide, 75 nationalities, a retention rate above 90% and almost € 5 billion in combined revenue in 2024, we are looking for someone like you to join our team as we continue to shape a safer, more efficient, and connected world! Purpose and Mission Bekaert is seeking an experienced IT professional to lead IT Service Management and Process Excellence, ensuring high-quality service delivery and driving continuous improvement across IT operations. This role focuses on vendor governance, service level management, and process optimization, with a strong emphasis on managing global IT service providers (e.g., TCS, Infosys, Wipro) for quality and cost efficiency. How this role fits into Bekaert ADS: * Reports to: Global Lead IT Strategy, Governance & Transformation * Partners with: IT Service Owners, IT Product & Platform Teams, IT Leadership Teams * Key stakeholder groups: Business Units, Corporate Functions, IT Leadership Teams Key Activities and Responsibilities * IT Service Management Process Excellence & Continuous Improvement: Maintain and improve IT governance frameworks (ITIL, COBIT). Optimize key processes-Incident, Problem, Change, Service Level, Knowledge Management-using Lean-Agile principles and data-driven insights. Own IT-for-IT tools (ticketing, dashboards) to embed best practices and enable visibility. * IT Service Quality Assurance & Governance: Monitor SLA performance, report service quality, and drive compliance with GDPR, EU AI Act, and internal policies. Ensure audit readiness, manage evidence, and lead risk remediation. Deliver compliance reports and improvement recommendations to leadership. * Vendor Management: Govern IT service providers at contract level, maintain consolidated performance scorecards, and enforce systemic improvements across services. Support strategic negotiations and unified communication for cross-service enhancements. Skills TECHNICAL SKILLS Certifications: * ITIL Foundation (Capability or Lifecycle preferred); higher-level ITIL certifications desirable. * CGEIT, COBIT, CISSP * Lean/Agile certifications (preferred); PMP or equivalent project management certification (optional but desirable). * Compliance Certifications: Certifications such as CISA, or similar are highly desirable. Core Competencies: * Strong ITIL knowledge with proven governance experience. * Skilled in ITIL-based service management, SLA governance, and ITSM tools, approaches, and processes. * Ability to lead organizational change and quality initiatives. * Regulatory Knowledge: Deep understanding of relevant regulations (GDPR, EU AI Act, etc.) and their impact on IT service management. Technical Breadth: * Broad understanding of infrastructure, cybersecurity, applications, platforms, and cloud to govern service delivery effectively. * Ability to track service performance, interpret KPIs, and challenge internal IT product owners, service owners, and vendors using data-driven insights. SOFT SKILLS * Influence without Authority: Ability to steer decisions and drive change across global teams without direct reporting lines; strong facilitation and stakeholder engagement skills. * Change Leadership: Passion for shaping processes and driving transformation in complex environments; resilient and adaptable under ambiguity. * Lean-Agile Ways of Working: Advocate for iterative delivery, continuous improvement, and collaborative practices; experience applying Lean principles and Agile frameworks in IT service environments. * Measure & Grow Mindset: Focus on measurable outcomes with quantifiable KPIs; ability to define, track, and report improvements in service quality and efficiency. * Team Player: Skilled at bringing people together, fostering collaboration in multi-cultural, global teams. * Vendor Relationship Management: Strong negotiation and conflict resolution skills; ability to build trust and accountability with external partners while maintaining service excellence. Experience * Minimum 5+ years in IT Service Management, with proven record in service quality improvement and process optimization. * Preferred: At least 3-5 years as Delivery Manager or Key Account Manager in major IT service providers, managing service performance. * Experience managing global IT services with complexity across multiple domains like manufacturing, commercial, HR, finance, and internal processes. Familiarity with working with multi-cultural teams in a global setup, able to collaborate effectively across regions and time zones. * Oversight of more than 20 different IT services in different IT domains, ensuring cost efficiency, value delivery, and performance optimization across the entire service portfolio. * Demonstrated success in driving measurable improvements in service performance and user experience. * Audit Experience: Proven experience managing IT audits (internal/external), including evidence collection, process walkthroughs, and remediation of findings. Qualifications and Education * Bachelor's degree in Science, Technology or related field. MBA is a plus. Be bold and take the leap! Our Digital Advanced Solutions (ADS) team is a dynamic group of technologists from around the globe who consistently push boundaries in digital innovation, cyber resilience, data science, intelligent automation, cloud solutions, and new agile methodologies. It is also good to know tht at Bekaert, we celebrate diversity and are committed to creating an inclusive work environment. We do not discriminate based on race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. Want to learn more about our digital opportunities? Visit Bekaert Careers

We are hiring a Powder Formulation Technician. The Powder Formulation Technician will be responsible for formulation of powdered media. 3rd Shift: 9:00 pm- 5:30 am At FUJIFILM Biosciences, we turn curiosity into breakthroughs that advance the field of life sciences. By offering a comprehensive portfolio of products and services in cell culture media, discovery research reagents, recombinant growth factors and proteins, fine chemicals, and critical assay materials, we partner with the brightest minds in biotech and pharma to tackle the world's biggest health challenges. Imagine being part of a team that enables life-changing discoveries like new vaccines, therapies, and advancements in regenerative medicine. Our culture fosters curiosity, collaboration, and innovation, and we pride ourselves on delivering unparalleled quality and service to our partners. If you're ready to make an impact, your future belongs with us at FUJIFILM Biosciences. Our headquarters in Santa Ana, California, is surrounded by world-class schools, lush parks, and scenic beaches like Laguna and Huntington, making it an ideal place to live, work, and explore. With additional campuses across the US, Europe, China, and Japan, we offer opportunities to make a difference worldwide. Fujifilm is globally headquartered in Tokyo with over 70,000 employees across four key business segments of healthcare, electronics, business innovation, and imaging. We are guided and united by our Group Purpose of "giving our world more smiles." Visit: *************************************************** Job Description Responsibilities: * Formulates Powder media formulas per manufacturing protocols utilizing various weighing equipment such as scales and balance. * Uses Mettler-Toledo IND780 terminal system in conjunction with the SAP ERP system to ensure correct raw materials assigned in the batch record are weighed at the specified quantity. * Suggest changes in departmental procedures and processes (SOPs) as needed. * Performs and documents line clearance at the start of each formulation event. * Maintains all required logs and associated documentation. * Assures that all chemicals are stored and labeled properly. * Performs process scale checks on all required equipment including scales and balances. * Keeps work area, utensils, tanks, mills, and equipment clean and organized. * Ensures that supplies needed such as weigh boats, gloves, lab coats, etc. are well stocked in their designated areas. Orders supplies or informs Lead/Supervisor if supplies need to be ordered. * Follows all safety procedures and works in a safe manner including wearing all required personal protective equipment. * Understands and follows procedures to ensure that chemicals are handled properly. * Good understanding of metric system and its conversions. * Follows and actively participates in sustaining the 6S program in the area. * Other duties as requested by Lead or Supervisor. Required Skills/Education: * High School Diploma or equivalent. * Background in medical devices, diagnostics, food/vitamin processing, or pharmaceuticals. * 1-2 years of hands on experience * General education about chemicals and proper handling (college level science preferred). * Working knowledge of metric system. * Good understanding of current Good Manufacturing Practices (cGMPs). * Ability to speak, read, and write English. * Good oral and written communication skills. Salary and Benefits: * For California, the base salary range for this position is $19.65 - $25.51 per hour. Compensation for the successful candidate will depend on various factors (e.g., qualifications, education, prior experience, location, etc.). * Medical, Dental, Vision * Life Insurance * 401k * Paid Time Off * #LI-onsite EEO Information Fujifilm is committed to providing equal opportunities in hiring, promotion and advancement, compensation, benefits, and training regardless of nationality, age, gender, sexual orientation or gender identity, race, ethnicity, religion, political creed, ideology, national, or social origin, disability, veteran status, etc. ADA Information If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to our HR Department (*****************).

We are hiring a Powder Formulation Technician. The Powder Formulation Technician will be responsible for formulation of powdered media. 3rd shift - 9PM - 5:30AM At FUJIFILM Biosciences, we turn curiosity into breakthroughs that advance the field of life sciences. By offering a comprehensive portfolio of products and services in cell culture media, discovery research reagents, recombinant growth factors and proteins, fine chemicals, and critical assay materials, we partner with the brightest minds in biotech and pharma to tackle the world's biggest health challenges. Imagine being part of a team that enables life-changing discoveries like new vaccines, therapies, and advancements in regenerative medicine. Our culture fosters curiosity, collaboration, and innovation, and we pride ourselves on delivering unparalleled quality and service to our partners. If you're ready to make an impact, your future belongs with us at FUJIFILM Biosciences. Our headquarters in Santa Ana, California, is surrounded by world-class schools, lush parks, and scenic beaches like Laguna and Huntington, making it an ideal place to live, work, and explore. With additional campuses across the US, Europe, China, and Japan, we offer opportunities to make a difference worldwide. Fujifilm is globally headquartered in Tokyo with over 70,000 employees across four key business segments of healthcare, electronics, business innovation, and imaging. We are guided and united by our Group Purpose of "giving our world more smiles." Visit: *************************************************** Job Description Responsibilities: * Formulates Powder media formulas per manufacturing protocols utilizing various weighing equipment such as scales and balance. * Uses Mettler-Toledo IND780 terminal system in conjunction with the SAP ERP system to ensure correct raw materials assigned in the batch record are weighed at the specified quantity. * Suggest changes in departmental procedures and processes (SOPs) as needed. * Performs and documents line clearance at the start of each formulation event. * Maintains all required logs and associated documentation. * Assures that all chemicals are stored and labeled properly. * Performs process scale checks on all required equipment including scales and balances. * Keeps work area, utensils, tanks, mills, and equipment clean and organized. * Ensures that supplies needed such as weigh boats, gloves, lab coats, etc. are well stocked in their designated areas. Orders supplies or informs Lead/Supervisor if supplies need to be ordered. * Follows all safety procedures and works in a safe manner including wearing all required personal protective equipment. * Understands and follows procedures to ensure that chemicals are handled properly. * Good understanding of metric system and its conversions. * Follows and actively participates in sustaining the 6S program in the area. * Other duties as requested by Lead or Supervisor. Required Skills/Education: * High School Diploma or equivalent. * Good work history. * Background in medical devices, diagnostics, food/vitamin processing, or pharmaceuticals. * 1-2 years of hands on experience * General education about chemicals and proper handling (college level science preferred). * Working knowledge of metric system. * Good understanding of current Good Manufacturing Practices (cGMPs). * Ability to speak, read, and write English. * Good oral and written communication skills. Salary and Benefits: * For California, the base salary range for this position is $19.65 - $25.51 per hour. Compensation for the successful candidate will depend on various factors (e.g., qualifications, education, prior experience, location, etc.). * Medical, Dental, Vision * Life Insurance * 401k * Paid Time Off * #LI-onsite EEO Information Fujifilm is committed to providing equal opportunities in hiring, promotion and advancement, compensation, benefits, and training regardless of nationality, age, gender, sexual orientation or gender identity, race, ethnicity, religion, political creed, ideology, national, or social origin, disability, veteran status, etc. ADA Information If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to our HR Department (*****************).

**3rd Shift Available** PRINCIPAL FUNCTION: Overall responsibility is to work in a process of continuous manufacturing improvement, operate equipment, monitor machines, and document results while adhering to strict protocols. Essential Duties and Responsibilities To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. -Daily Evaluation of machines and equipment to diagnose problems -Dismantling of machines (sometimes partial) -Assist engineering with the setup of equipment and or order parts to ensure equipment produces quality parts. -Complete Preventative maintenance functions on equipment in the facility, as well as troubleshoot and repair. -Provide technical guidance to supervisors. -Assist with the Training of other Lawrence Plastics employees. -Comply with IATF 16949 Standards. - Dependable attendance daily, ability and willingness to work overtime as scheduled. - Various other duties as required by the department. -Knowledge of robots and robot programming EDUCATION and EXPERIENCE REQUIRED: - High School diploma and 5 years of experience. - Prior experience in a similar environment is a plus, but not a requirement. - Familiarity with quality control standards - especially IATF 16949 - in a production setting is a plus, but not a requirement. -Building EOAT. Trained in RJG Principles. - U.S. work authorization. REQUIRED SKILLS: -Demonstrated ability to read and comprehend quality standards. -Prior experience in a similar environment is a plus, but not a requirement. -Familiarity with quality control standards-especially IATF 16949-in a production setting is a plus, but not a requirement. -U.S. work authorization PHYSICAL REQUIREMENTS: - Standing, sitting, and/or bending for extended periods of time. - Walking short distances frequently. - Working in a space that lacks climate control. - Lifting and carrying objects with an estimated maximum weight of up to 40 lbs. regularly. - Pushing or pulling objects with up to 15 lbs. of force regularly. - Gross manipulation skills for picking up, holding, and turning objects. - Fine manipulation skills such as touching, picking, and moving, primarily with fingers and hands. - Commitment to workplace safety. - Required physical presence in the workplace every day scheduled. - Required to work Overtime as needed. Lawrence Plastics is an EEO Employer - M/F/Disability/Protected Veteran Status View all jobs at this company

At Panduit, we don't just offer a job - we offer a career where your contributions directly impact our customers, the environment and our company's success. You'll have the opportunity to grow, innovate, and be a part of an inclusive team that celebrates both individual and collective achievements. If you're ready to elevate your career and help us deliver exceptional experiences to our customers, apply today and make your mark with Panduit! Ready to take your technical skills to the next level? Join us as a Sr. Production Technician and be at the forefront of advanced manufacturing! The Sr. Production Technician operates, troubleshoots, and maintains advanced manufacturing equipment while completing work orders. This role requires technical expertise and the ability to apply lean tools for continuous improvement. What You Will Do Machine Setup & Troubleshooting: Configure, troubleshoot, and optimize advanced production equipment and processes. Operations & Production: Start up, operate, and shut down advanced machinery to produce high-quality finished products. Process Improvement & Documentation: Collaborate with engineering to evaluate system effectiveness, develop procedures, and create training materials. Quality Control: Address production quality issues, escalating unresolved concerns to supervisors or quality teams. Waste Reduction: Identify and eliminate inefficiencies, complete A3 improvement plans, and participate in Kaizen events. What You Will Bring Education: High school diploma or GED equivalent. Experience: 5+ years of related manufacturing experience operating and monitoring extrusion equipment to produce product within quality and specification requirements. Experience setting up, inspecting, and troubleshooting extrusion lines, including material loading, die changes, and start-up adjustments. Technical Aptitude: Skilled in troubleshooting, repairing, and maintaining extrusion . Skills: Strong attention to detail, mathematical skills, and problem-solving capabilities. What We Can Offer You Competitive Pay & Benefits: Wages starting at $24 - $30/hr for Production Tech Srs! Generous Time Off: Take advantage of our generous vacation, sick days, holidays, plus a volunteer day to give back to the community. Retirement & Growth: 401(k) match, profit sharing, and abundant growth and development opportunities to help you advance your career. Work in Comfort: Stay cool and focused with an air-conditioned workspace designed for productivity and comfort. Comprehensive Healthcare Options: Choose from multiple healthcare plans through Blue Cross Blue Shield to find the coverage that works for you. Making the connections that matter. Join us and apply online to be part of the Panduit team. We're an Equal Opportunity Employer, dedicated to creating an inclusive workplace for all. Applicants must be currently authorized to work in the United States on a full-time basis. Panduit will not sponsor applicants for work visas now or in the future. Work Shift Night (United States of America)

We make life more comfortable. Leggett & Platt's overall mission is a commitment to enhance lives - by delivering quality products, offering empowering and rewarding careers, and doing our part in bringing about a better future. Leggett & Platt's inventive heritage and leadership in the residential products industry span more than 130 years. As The Components People , we are the leading supplier of a wide range of products and components for all areas of life, including mattress springs and carpet cushion, as well as bedding machinery and erosion-control products. From aerospace tubing and fabricated assemblies to flooring underlayment and carpet cushion, Leggett & Platt has divisions that design, manufacture, and sell a variety of products. Our reliable product development and launch capability, coupled with our global footprint, make us a trusted partner for customers in the aerospace, hydraulic cylinders, flooring, textile, and geo components industries. Learn more about the history of Leggett: *************************** Summary: Position will be responsible to collect and provide inspection data/capability data to help analyze and solve quality issues. Position will work with Manufacturing Engineers to make changes and improvements to product designs, standard work instructions, engineering standards and specifications, and manufacturing processes. Other responsibilities include conducting pre and post runs on new sample jobs, training operators, conducting audits and analyzing quality data including costs, issuing Quality Alerts and applying fundamental statistical methods for process control. Occasional customer/site visits may be necessary. Essential Duties: 5.1 Conduct floor inspections based on resolving process problems, customer issues and audit findings. 5.2 Work on assigned Quality Improvement Projects. This could include: participating on project teams with customers, plant leadership and hourly employees to solve problems. Also includes participation on Continuous Improvement teams for 6S and PDCA projects. 5.3 Work on assigned Customer Complaints and resolve in a reasonable amount of time. This would include such tasks as: investigating issue to determine a cause, implementing a solution and effectively communicating results to manufacturing, leadership and customers when necessary. 5.4 Work on assigned Corrective Action Requests and resolve in a reasonable amount of time. This would include such tasks as: conducting a more comprehensive investigation using formal problem solving tools to determine root cause, implementing a solution and effectively communicating results to manufacturing, leadership and customers when necessary. 5.6 Issues engineering changes as requested from internal production modifications and cost changes. 5.7 Issues internal engineering changes related to processes and material changes. Qualification Requirements: Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions of the job as long as undo hardships are not created by the accommodations. Education and/or experience: Associate degree from a college in Engineering discipline (Industrial, Product, Manufacturing, etc.) or an equivalent amount of experience/ training in a manufacturing environment. Language Skills: Ability to read, analyze and interpret technical procedures and governmental regulations. Ability to write reports and procedural manuals. Ability to present information and instructions and respond to questions, complaints, or inquiries from employees, customers and management. Mathematical Skills: 9.1. Ability to calculate figures and other calculations and apply mathematical concepts as required. 9.2. Ability to use computer software for projects and reports as needed. Reasoning Ability: Ability to define problems, collect data, establish facts, draw conclusions, and offer solutions. Physical Demands: 11.1. Must be able to perform the essential functions of the job. Accommodations will be made if necessary and without creating undo hardships for the company. 11.2. The employee will be on the shop floor on a regular basis and may need to occasionally lift/move up to 50 pounds. Vision abilities will require good vision and the ability to focus on diagrams, layouts, equipment, etc. What to Do Next Now that you've had a chance to learn more about us, what are you waiting for! Apply today and allow us the opportunity to learn more about you and the value you can bring to our team. Once you apply, be sure to create a profile, and sign up for job alerts, so you can be the first to know when new opportunities become available. If you require assistance completing an application, please contact our team at ******************* Our Values Our values speak to our shared beliefs, and describe how we approach working together. Put People First reflects our commitment to safety and care of each other, learning and development, and creating an inclusive environment of mutual respect, empathy and belonging. Do the Right Thing focuses us on acting with honesty and integrity, delivering the results the right way, taking pride in our work, and speaking the truth - good or bad. Do Great Work…Together occurs when we engage without hierarchy, collaborate as a team, embrace challenges, and work for the good of all of us. Take Ownership and Raise the Bar demonstrates our responsibility to add value and make a difference, challenge the status quo and biases to make things better, foster innovative and creative solutions to drive impact, and explore new perspectives and embrace change. Our Commitment to You We're actively taking steps to make sure our culture is inclusive and that our processes and practices promote equity for all. Leggett & Platt is comprised of people of all abilities, gender identities and expressions, ages, ethnicities, sexual orientations, veteran status, and more. Join us! We welcome and encourage applications if you meet the minimum qualifications. Even if you do not meet the preferred qualifications, we'd love the opportunity to consider you. For more information about how we handle your personal data in connection with our recruiting processes, please refer to the Recruiting Privacy Notice on the “Privacy Notice” tab located at ************************** IMPORTANT NOTICE TO APPLICANTS Regarding Equal Employment / Equal Access Leggett & Platt, Incorporated, and all its Canadian affiliates value the diversity of skills, knowledge, and perspectives our employees bring to our workplace. We believe the presence in our workforce of individuals with characteristics protected under local human rights legislation, including but not limited to females, minorities, individuals with disabilities, veterans, persons from all faiths and national origins and of all colors reward us with greater talent, new ideas and unique perspectives. It is therefore our policy to recruit, hire, promote, transfer, administer benefits and handle all other conditions of employment in a non-discriminatory manner without discrimination regarding any protected status under local human rights legislation. Our Chief Executive Officer has requested that all of our employees make equal opportunity a priority. We are committed to workplace accessibility and accommodation of persons with disabilities. Should you have any need for accommodation at any stage of the hiring or recruitment process, please let us know and we will work with you to provide appropriate accommodation or address any accessibility-related needs. This information will be handled as confidentially as practical. You are welcome to contact a member of our Corporate Employee Relations staff at ************ if you need assistance to apply, wish to discuss an accommodation, or have questions about this notice.

We make life more comfortable. Leggett & Platt's overall mission is a commitment to enhance lives - by delivering quality products, offering empowering and rewarding careers, and doing our part in bringing about a better future. Leggett & Platt's inventive heritage and leadership in the residential products industry span more than 130 years. As The Components People, we are the leading supplier of a wide range of products and components for all areas of life, including mattress springs and carpet cushion, as well as bedding machinery and erosion-control products. From aerospace tubing and fabricated assemblies to flooring underlayment and carpet cushion, Leggett & Platt has divisions that design, manufacture, and sell a variety of products. Our reliable product development and launch capability, coupled with our global footprint, make us a trusted partner for customers in the aerospace, hydraulic cylinders, flooring, textile, and geo components industries. Learn more about the history of Leggett: *************************** Summary: Position will be responsible to collect and provide inspection data/capability data to help analyze and solve quality issues. Position will work with Manufacturing Engineers to make changes and improvements to product designs, standard work instructions, engineering standards and specifications, and manufacturing processes. Other responsibilities include conducting pre and post runs on new sample jobs, training operators, conducting audits and analyzing quality data including costs, issuing Quality Alerts and applying fundamental statistical methods for process control. Occasional customer/site visits may be necessary. Essential Duties: * 5.1 Conduct floor inspections based on resolving process problems, customer issues and audit findings. * 5.2 Work on assigned Quality Improvement Projects. This could include: participating on project teams with customers, plant leadership and hourly employees to solve problems. Also includes participation on Continuous Improvement teams for 6S and PDCA projects. * 5.3 Work on assigned Customer Complaints and resolve in a reasonable amount of time. This would include such tasks as: investigating issue to determine a cause, implementing a solution and effectively communicating results to manufacturing, leadership and customers when necessary. * 5.4 Work on assigned Corrective Action Requests and resolve in a reasonable amount of time. This would include such tasks as: conducting a more comprehensive investigation using formal problem solving tools to determine root cause, implementing a solution and effectively communicating results to manufacturing, leadership and customers when necessary. * 5.6 Issues engineering changes as requested from internal production modifications and cost changes. * 5.7 Issues internal engineering changes related to processes and material changes. Qualification Requirements: Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions of the job as long as undo hardships are not created by the accommodations. Education and/or experience: Associate degree from a college in Engineering discipline (Industrial, Product, Manufacturing, etc.) or an equivalent amount of experience/ training in a manufacturing environment. Language Skills: Ability to read, analyze and interpret technical procedures and governmental regulations. Ability to write reports and procedural manuals. Ability to present information and instructions and respond to questions, complaints, or inquiries from employees, customers and management. Mathematical Skills: * 9.1. Ability to calculate figures and other calculations and apply mathematical concepts as required. * 9.2. Ability to use computer software for projects and reports as needed. Reasoning Ability: Ability to define problems, collect data, establish facts, draw conclusions, and offer solutions. Physical Demands: * 11.1. Must be able to perform the essential functions of the job. Accommodations will be made if necessary and without creating undo hardships for the company. * 11.2. The employee will be on the shop floor on a regular basis and may need to occasionally lift/move up to 50 pounds. Vision abilities will require good vision and the ability to focus on diagrams, layouts, equipment, etc. What to Do Next Now that you've had a chance to learn more about us, what are you waiting for! Apply today and allow us the opportunity to learn more about you and the value you can bring to our team. Once you apply, be sure to create a profile, and sign up for job alerts, so you can be the first to know when new opportunities become available. If you require assistance completing an application, please contact our team at ******************* Our Values Our values speak to our shared beliefs, and describe how we approach working together. * Put People First reflects our commitment to safety and care of each other, learning and development, and creating an inclusive environment of mutual respect, empathy and belonging. * Do the Right Thing focuses us on acting with honesty and integrity, delivering the results the right way, taking pride in our work, and speaking the truth - good or bad. * Do Great Work…Together occurs when we engage without hierarchy, collaborate as a team, embrace challenges, and work for the good of all of us. * Take Ownership and Raise the Bar demonstrates our responsibility to add value and make a difference, challenge the status quo and biases to make things better, foster innovative and creative solutions to drive impact, and explore new perspectives and embrace change. Our Commitment to You We're actively taking steps to make sure our culture is inclusive and that our processes and practices promote equity for all. Leggett & Platt is comprised of people of all abilities, gender identities and expressions, ages, ethnicities, sexual orientations, veteran status, and more. Join us! We welcome and encourage applications if you meet the minimum qualifications. Even if you do not meet the preferred qualifications, we'd love the opportunity to consider you. For more information about how we handle your personal data in connection with our recruiting processes, please refer to the Recruiting Privacy Notice on the "Privacy Notice" tab located at ************************** IMPORTANT NOTICE TO APPLICANTS Regarding Equal Employment / Equal Access Leggett & Platt, Incorporated, and all its Canadian affiliates value the diversity of skills, knowledge, and perspectives our employees bring to our workplace. We believe the presence in our workforce of individuals with characteristics protected under local human rights legislation, including but not limited to females, minorities, individuals with disabilities, veterans, persons from all faiths and national origins and of all colors reward us with greater talent, new ideas and unique perspectives. It is therefore our policy to recruit, hire, promote, transfer, administer benefits and handle all other conditions of employment in a non-discriminatory manner without discrimination regarding any protected status under local human rights legislation. Our Chief Executive Officer has requested that all of our employees make equal opportunity a priority. We are committed to workplace accessibility and accommodation of persons with disabilities. Should you have any need for accommodation at any stage of the hiring or recruitment process, please let us know and we will work with you to provide appropriate accommodation or address any accessibility-related needs. This information will be handled as confidentially as practical. You are welcome to contact a member of our Corporate Employee Relations staff at ************ if you need assistance to apply, wish to discuss an accommodation, or have questions about this notice.

Who We Are Royal is a diverse manufacturer of injection molding, urethane foam and assemblies. We serve the automotive, furniture, and consumer products industries. People who succeed at Royal are those who share the values of our company: Integrity. Stewardship. Teamwork. Hard work. Excellence. We're committed to being the employer of choice. Our goal is to build a culture of commitment where everyone is respected and valued. Where everyone participates. Where everyone matters. We give our employees the responsibility -- and the authority -- to make decisions. We try to provide the best possible work environment. We encourage creativity. We applaud ingenuity. We reward problem solving. What You'll Do We are looking for a hands-on, mechanically minded individual who has a desire to jump in and learn our injection molding machines and processes. If hired, you'll spend 9-12 months working through a robust in-house training program, designed to develop you into a technical leader at Royal. In house, we call this role a Molding Supervisor. You'll both manage a small team of molding operators as well as spend the majority of your time on the floor, assisting with molding changes and troubleshooting issues within our bay. Based out of our Cullman, AL facility, this position reports to the Production Manager. Core Responsibilities: Troubleshoot injection molding processes and equipment. Problem-solve in order to develop corrective actions for customer issues and ideas for improvement Climb in and out of injection molding equipment in order to best perform mold and color changes Prioritize production orders and oversee the production of quality products to ensure our customer standards and needs are met Maintain the work area, equipment and molds to provide the team with an organized workplace and proper tools Responsible for machine safety and for following all prescribed lock out procedures Other Responsibilities: Schedule team machine assignments and break coverage in order to hit daily goals Work alongside current Molding Supervisors, learning how to lead a small team (3-6) in the execution of daily production tasks and in continuous improvement Practice writing and conducting employee performance evaluations Physical Responsibilities: Ability to lift up to 55lbs Prolonged periods of standing, walking and performing repetitive tasks Bending and stooping Ability to use fingers, hands and arms to complete a task (dexterity) Hand-eye coordination All employees must wear approved safety glasses Starting Wage: $26-$33.00/hr + quarterly bonuses What You'll Bring Qualifications: Proven hands-on technical experience (work or personal) is highly preferred (utility, maintenance, process tech, etc.) Experience with injection molding equipment is a plus High school diploma/GED or 3-5 years of solid manufacturing experience Willing and able to work 45-50 hours per week Although this is a 3rd shift (12am-8am) position, there will be training required on 1st shift (8am-4pm) Interest in developing into a leadership role Prior leadership experience is greatly appreciated What You'll Get No Sunday work Weekly pay Quarterly bonuses based on profitability Ownership in the company through our ESOP plan (Employee Stock Ownership Plan) Outstanding medical insurance IND123HP #ZR

MDM (Master Data Management) Support manufacturing and engineering data management, CCOs and Work Instructions The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES * Customer Focus * Operational Excellence * High-Performance Culture * Innovation * Financial Strength OUR BEHAVIORS * Own It * Act With Urgency * Foster a Customer-First Mindset * Think Big and Execute * Lead by Example * Drive Continuous Improvement * Learn and Seek Out Development * Promote Transparent & Open Communication At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $8 billion in sales, a strong customer base and global reach in nearly 130+ countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to **********************. If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. Same Posting Description for Internal and External Candidates

Maintenance Manufacturing Engineering Tech Reports to: Maintenance Manager Scope: The Maintenance Manufacturing Engineering Technician is responsible for the safe and efficient maintenance of plant assets. They define and lead processes and systems for providing a proper response to failures and quality repairs to the equipment by specifying repairs and modifications to equipment. It is important to note the maintenance ME Tech is not the backfill for the manager on leave, contractor management, and other administrative duties that are part of the maintenance function. Responsibilities and Duties: Developing maintenance procedures, methods, and testing Supporting craftsmen performing all facets of maintenance work and responding to equipment faults Troubleshooting equipment breakdowns Specifying replacement parts and ensuring the equipment is functioning correctly Assist Planners in the development of Work Packages Inspecting jobs to verify the work is performed correctly Partnering with other departments and customers, specifically other Engineering and production teams Developing processes to manage maintenance tools, and equipment Monitoring and controlling maintenance costs Leading responses for emergencies, unplanned problems, and repairs Driving improvements in health and safety policies and procedures Leading improvement to maintenance methods and safety of plant, personnel, and production processes Provide skill-based training to craftsmen on specific equipment in the plant and general skill-based knowledge Programming programmable logic controllers (PLC), and distributed control system (DCS) (electrical) Developing installation and commissioning packages for new installation Measurement of Position Performance: Provide timely technical support to supervisors and trades Improve mean time to repair (MTTR), extend mean to between failure (MTBF) Additions and corrections to spare parts as required. PM & PdM program executed on time as planned Position Goals: The maintenance ME Tech has the following primary goals: Technical support to the maintenance staff (supervisors and trades) Ensure the maintenance function provides operations with the service it requires PM & PdM program executed as scheduled, corrective actions addressed Minimize MTTR and operational downtime by supporting equipment repair right the first time Relationships: Work closely with operations and maintenance supervision. Work closely with planners and scheduler Work closely with stores and purchasing personnel Maintain good working relationships with maintenance trades Coordinate asset management activities with reliability Engineers Work with other organizational units such as HR and accounting Maintenance ME Tech is different and distinct from project, process, and reliability technicians. Maintenance ME Tech focuses on the preservation of day-to-day asset reliability. Requirements, Qualifications, and Selection Criteria: Mechanical / Electrical Engineering degree or significant experience with a tech school background desired. Have an understanding of equipment operation Have an understanding of equipment repair practices Ability to use a CMMS and analyze data Training in industrial automation Training and certifications in some of the following: Predictive Technologies Repair Practices Spare Parts Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to **********************. Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire.

MDM (Master Data Management) Support manufacturing and engineering data management, CCOs and Work Instructions The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development Promote Transparent & Open Communication At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $8 billion in sales, a strong customer base and global reach in nearly 130+ countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. Same Posting Description for Internal and External Candidates

Coordinates all functions related to technical support for specified departments. Assists coach(es) with technical resources necessary to improve efficiencies and quality. Assures that all processes in the technical support areas conform to Liebert Quality System. Assist with corrective action and follows up with quality issues. Responsible for a variety of tasks including, but not limited to, evaluating, and recommending process improvements; time studies; work instructions; assisting with tooling modifications; and assisting with relocating and setting up of stations. Assists coach(es) with the coordination of departmental safety team meetings. Assists with corrective actions and follows up on quality issues. Provides technical support and troubleshoot complex issues. Recommends process improvements. Conducts time studies and work instructions Assists with tool and jig modifications Improves workstation ergonomics Able to lift up to 50 pounds unassisted. able to work cross functionally. Able to foster teamwork and resolve conflict. Able to work in fast past environment and be self-motivated and directed. Able to work long hours and a variety of shifts as needed. The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development Promote Transparent & Open Communication At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $8 billion in sales, a strong customer base and global reach in nearly 130+ countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. Same Posting Description for Internal and External Candidates

Coordinates all functions related to technical support for specified departments. Assists coach(es) with technical resources necessary to improve efficiencies and quality. Assures that all processes in the technical support areas conform to Liebert Quality System. Assist with corrective action and follows up with quality issues. Responsible for a variety of tasks including, but not limited to, evaluating, and recommending process improvements; time studies; work instructions; assisting with tooling modifications; and assisting with relocating and setting up of stations. Assists coach(es) with the coordination of departmental safety team meetings. Assists with corrective actions and follows up on quality issues. Provides technical support and troubleshoot complex issues. Recommends process improvements. Conducts time studies and work instructions Assists with tool and jig modifications Improves workstation ergonomics Able to lift up to 50 pounds unassisted. able to work cross functionally. Able to foster teamwork and resolve conflict. Able to work in fast past environment and be self-motivated and directed. Able to work long hours and a variety of shifts as needed. The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development Promote Transparent & Open Communication At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $8 billion in sales, a strong customer base and global reach in nearly 130+ countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. Same Posting Description for Internal and External Candidates

Maintenance Manufacturing Engineering Tech Reports to: Maintenance Manager Scope: The Maintenance Manufacturing Engineering Technician is responsible for the safe and efficient maintenance of plant assets. They define and lead processes and systems for providing a proper response to failures and quality repairs to the equipment by specifying repairs and modifications to equipment. It is important to note the maintenance ME Tech is not the backfill for the manager on leave, contractor management, and other administrative duties that are part of the maintenance function. Responsibilities and Duties: Developing maintenance procedures, methods, and testing Supporting craftsmen performing all facets of maintenance work and responding to equipment faults Troubleshooting equipment breakdowns Specifying replacement parts and ensuring the equipment is functioning correctly Assist Planners in the development of Work Packages Inspecting jobs to verify the work is performed correctly Partnering with other departments and customers, specifically other Engineering and production teams Developing processes to manage maintenance tools, and equipment Monitoring and controlling maintenance costs Leading responses for emergencies, unplanned problems, and repairs Driving improvements in health and safety policies and procedures Leading improvement to maintenance methods and safety of plant, personnel, and production processes Provide skill-based training to craftsmen on specific equipment in the plant and general skill-based knowledge Programming programmable logic controllers (PLC), and distributed control system (DCS) (electrical) Developing installation and commissioning packages for new installation Measurement of Position Performance: Provide timely technical support to supervisors and trades Improve mean time to repair (MTTR), extend mean to between failure (MTBF) Additions and corrections to spare parts as required. PM & PdM program executed on time as planned Position Goals: The maintenance ME Tech has the following primary goals: Technical support to the maintenance staff (supervisors and trades) Ensure the maintenance function provides operations with the service it requires PM & PdM program executed as scheduled, corrective actions addressed Minimize MTTR and operational downtime by supporting equipment repair right the first time Relationships: Work closely with operations and maintenance supervision. Work closely with planners and scheduler Work closely with stores and purchasing personnel Maintain good working relationships with maintenance trades Coordinate asset management activities with reliability Engineers Work with other organizational units such as HR and accounting Maintenance ME Tech is different and distinct from project, process, and reliability technicians. Maintenance ME Tech focuses on the preservation of day-to-day asset reliability. Requirements, Qualifications, and Selection Criteria: Mechanical / Electrical Engineering degree or significant experience with a tech school background desired. Have an understanding of equipment operation Have an understanding of equipment repair practices Ability to use a CMMS and analyze data Training in industrial automation Training and certifications in some of the following: Predictive Technologies Repair Practices Spare Parts Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire.

Located in the heart of Silicon Valley, Tenergy is a total power solution provider in the rechargeable battery and renewable energy industry. With over 20 years of reputation and track record, Tenergy is a recognized leading battery brand and Power solution partner in the fast growing renewable energy sector. Tenergy serves broad spectrums of customers for their applications including consumer electronics smart devices, industrial application, medical, electrical transportation and power storage. The application and business possibility with our products is endless with increasing needs for mobility and durable power. Tenergy offers competitive products in the market due to our global logistics, scale, quality, and commitment to customer satisfaction. Job Description The candidate will work in a team work environment, perform battery testing and battery charging duties, may assemble small size battery packs and related sub-assemblies when needed. Candidate must be a team player with demonstrated skills and abilities, or the fast learner in assembly manufacturing, material handling, soldering, wiring and ability to comprehend basic prints and wiring diagrams. The candidate may perform a variety of tasks in accordance with their training, experience, and skill as assigned by their Lead or Supervisor including: Assemble small size battery packs and related sub-assemblies according to specifications and drawings. Spot soldering and welding for electrical board (PCB). QC Testing and RMA analysis. Perform battery testing according to the defined procedures. Perform battery charging according to defined operating procedures. Perform proper data recording. Report issues and troubleshooting issues identified during the testing. May assist with new battery pack design. May assist with existing battery pack design improvement. Qualifications College degree in engineering Attention to details and responsible work attitude Excellent hand-eye coordination, hands-on, manual dexterity Ability to read/listen carefully to follow instructions and procedures Team player with good communication, interpersonal skills Ability to use common sense to solve practical problems. Electrical-related knowledge and training are plus. Experience in electrical assembly and soldering is a plus. Additional Information Salary DOE $20-$23/hr. Eligible for Medical/Dental/Vision Insurance and 401K with company match, paid holidays. Work schedule is Monday- Friday 8:30am-5:00pm.