Inspector jobs at Triumph Group

Compensation: Earn up to $40/hr. Flat Rate! 100% Paid Life Insurance Benefits Include: -Paid vacation and holidays -Health Insurance -Dental Insurance -Vision Insurance -Matching 401(k) -Paid on-the-job training -Leadership development and coaching -Tuition reimbursement including technical certifications -Safety shoes offered through the company -Referral program -Employee discount Qualifications: -Must have/maintain VA State Safety Inspection License -Must have a valid Driver's License -Reliable transportation to and from work -Have effective interpersonal and oral communication skills Responsibilities: -Conducts state safety inspections on vehicles in an ethical manner- following all Virginia State Police, Virginia DEQ, and company guidelines -Observes general vehicle condition while performing basic services, and reports any obvious repair needs or safety concerns to the Service Manager -Maintains shop cleanliness for a clean and inviting appearance -Follows all safety procedures and reports any concerns to the Service Manager -Comply with established safety programs, including wearing protective eyewear PM Lube, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against based upon disability.

Inspector A&P in GAC Van Nuys $5,000 Sign-On Bonus Eligible. Unique Skills: At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the world's finest aviation experience starts with our people and when our people thrive, so does our mission. The base compensation range for this role is $43.62 - $50.89 per hour. Final compensation for this role will be determined by several factors including but not limited to: minimum and preferred qualifications, knowledge, skills, abilities, education, experience, and location. Gulfstream employees benefit from a total rewards package that includes competitive compensation, comprehensive benefits plans, wellness programs, paid leave and tuition assistance. Our U.S. benefits package includes: Medical, prescription, dental and vision coverage Life and disability insurance Retirement savings plan Employee assistance plan Voluntary programs such as adoption assistance, prepaid legal assistance, home and auto insurance, and accident insurance. Education and Experience Requirements High School Diploma or GED required. 6 years aviation maintenance experience (avionics, electrical, and/or mechanical). A&P (FAA Airframe and Powerplant) license required. Position Purpose :Performs inspections of aircraft, aircraft components, and reviews paperwork to ensure that workmanship meets acceptable standards of quality, and that aircraft are returned to service in an airworthy condition with all required. documentation properly completed and filed. Works as an integral part of the Quality Control/Assurance team assuring aircraft/components are in compliance to FAA/CAA requirements. Job Description Principle Duties and Responsibilities:Essential Functions: Responsible for Quality Control inspections on aircraft/components . Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data . Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting . Keeps accurate, neat and legible records of the work performed on aircraft/components . Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner . Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service . Ensures aircraft/components are airworthy prior to any flight activities . Mentors technicians on effective documentation . Additional Functions: Communicates with management as required. to identify work assignments and delivery schedules . Provides technical support to inspection personnel in supporting the FAA and/or CAA documented requirements . Perform other duties as assigned.Other Requirements: Strong computer skills. Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures. Working knowledge and application of Quality Assurance and/or Quality Control systems and methodologies. Must be able to read, write, speak, and understand the English language. This job requires one to be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 229777 Category: Quality Assurance Percentage of Travel: Up to 25% Shift: First Employment Type: Full-time Posting End Date: 12/23/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company . Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft #LI-AU1

Inspector A&P in GAC Van Nuys $5,000 Sign-On Bonus Eligible. The base compensation range for this role is $43.62 - $50.89 per hour. Medical, prescription, dental and vision coverage Life and disability insurance Retirement savings plan Voluntary programs such as adoption assistance, prepaid legal assistance, home and auto insurance, and accident insurance. High School Diploma or GED required. 6 years aviation maintenance experience (avionics, electrical, and/or mechanical). Performs inspections of aircraft, aircraft components, and reviews paperwork to ensure that workmanship meets acceptable standards of quality, and that aircraft are returned to service in an airworthy condition with all required. Works as an integral part of the Quality Control/Assurance team assuring aircraft/components are in compliance to FAA/CAA requirements. Responsible for Quality Control inspections on aircraft/components . # Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data . # Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting . # Keeps accurate, neat and legible records of the work performed on aircraft/components . # Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner . # Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service . # Ensures aircraft/components are airworthy prior to any flight activities . # Provides technical support to inspection personnel in supporting the FAA and/or CAA documented requirements . Strong computer skills. # Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures. # Working knowledge and application of Quality Assurance and/or Quality Control systems and methodologies. # Must be able to read, write, speak, and understand the English language. This job requires one to be able to read, write, speak, and understand the English language. Category: Quality Assurance Percentage of Travel: Up to 25% Shift: Employment Type: Full-time Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Legal Information Site Utilities Contacts Sitemap Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft #

Repair Station Sr Inspector A&P in GAC Brunswick Unique Skills: At Gulfstream, our people are at the heart of everything we do. We believe in inspiring and empowering every individual to reach their fullest potential. From workforce development and meaningful connections to a culture of trust, respect, and integrity, we invest in our employees so they can do their best work and achieve success together. Creating and delivering the world's finest aviation experience starts with our people and when our people thrive, so does our mission. Able to work day shift Mon-Thu 0600-1630. Education and Experience Requirements High School Diploma or GED required. 8 years aviation maintenance experience (avionics, electrical, and/or mechanical) to include 2 years of relevant Gulfstream aircraft experience and 2 years of aircraft inspection experience. A&P (FAA Airframe and Powerplant) license required. Position Purpose :Performs inspections of aircraft, aircraft components, and reviews paperwork to ensure that workmanship meets acceptable standards of quality, and that aircraft are returned to service in an airworthy condition with all required. documentation properly completed and filed. Works as an integral part of the Quality Control/Assurance team assuring aircraft/components are in compliance to FAA/CAA requirements. Job Description Principle Duties and Responsibilities:Essential Functions: Responsible for Quality Control inspections on aircraft/components . Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data . Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting . Keeps accurate, neat and legible records of the work performed on aircraft/components . Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner . Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service . Ensures aircraft/components are airworthy prior to any flight activities . Mentors technicians on effective documentation . Additional Functions: Communicates with management as required. to identify work assignments and delivery schedules . Provides technical support to inspection personnel in supporting the FAA and/or CAA documented requirements . Perform other duties as assigned.Other Requirements: Strong computer skills. Knowledge of inspection and maintenance procedures for various aircraft models and systems. Knowledge of pertinent technical reference materials. Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures. Working knowledge and application of Quality Assurance and/or Quality Control systems and methodologies. Must be able to read, write, speak, and understand the English language. This job requires one to be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 229392 Category: Quality Assurance Percentage of Travel: Up to 25% Shift: First Employment Type: Full-time Posting End Date: 12/08/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company . Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

RS Inspector A&P in GAC Savannah Unique Skills: Avionics Install Inspector first shift Mon-Thur 0600-1430. This position will support the avionics install teams with aircraft upgrades including STC and MRA projects to include FAA and Foreign registered aircraft. Candidate must have strong electrical background to include reading wiring diagrams and 3D models. A thorough ability to comprehend nad manage drawing revisions and approval substantiations. An understanding of certification path and projects is very helpful. Must be able to work from elevated positions to include stands, lifts, ladders, etc. Must be able to work in confined spaces periodically. Must be able to lift 50 lbs. Education and Experience Requirements High School Diploma or GED required. 6 years aviation maintenance experience (avionics, electrical, and/or mechanical). A&P (FAA Airframe and Powerplant) license required. Position Purpose :Performs inspections of aircraft, aircraft components, and reviews paperwork to ensure that workmanship meets acceptable standards of quality, and that aircraft are returned to service in an airworthy condition with all required. documentation properly completed and filed. Works as an integral part of the Quality Control/Assurance team assuring aircraft/components are in compliance to FAA/CAA requirements. Job Description Principle Duties and Responsibilities:Essential Functions: Responsible for Quality Control inspections on aircraft/components . Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data . Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting . Keeps accurate, neat and legible records of the work performed on aircraft/components . Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner . Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service . Ensures aircraft/components are airworthy prior to any flight activities . Mentors technicians on effective documentation . Additional Functions: Communicates with management as required. to identify work assignments and delivery schedules . Provides technical support to inspection personnel in supporting the FAA and/or CAA documented requirements . Perform other duties as assigned.Other Requirements: Strong computer skills. Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures. Working knowledge and application of Quality Assurance and/or Quality Control systems and methodologies. Must be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 229345 Category: Quality Assurance Percentage of Travel: Up to 25% Shift: First Employment Type: Full-time Posting End Date: 11/28/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company . Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Senior Quality Assurance Inspector - CWI/NDT Specialist Job Code: Plant Operation FLSA Status: Non-Exempt Steward Machine Company Steward Machine, a multi-generational family-owned business, boasts over a century of successful operation. We leverage extensive lifting capacity and some of the world's largest CNC machinery within our 290,000 square feet of manufacturing space. We provide complete turnkey solutions, managing everything from detailing shop drawings to in-house fabrication, welding, stress relieving, machining, gear cutting, and assembly. Steward Machine Co. proudly holds AISC certification to the highest standard for fracture critical endorsement. Our operations are guided by 5 core principles: Relentless Work Ethic, a "Can Do Attitude", Excellence, Passion, and Adaptability. We consistently deliver equipment to the world's most demanding clients, ensuring projects are completed right the first time with our unwavering "can do" attitude. Our track record for on-time deliveries is impeccable. Primary Purpose of the Position This inspector will be pivotal in upholding Steward Machine Company's commitment to excellence, ensuring all products consistently meet stringent specifications. This role is critical for maintaining our reputation for quality, efficiency, and safety, directly contributing to the company's continued success. Essential Functions / Duties Conduct meticulous inspections of machines and fabricated weldments at assembly, inspection, or machining stations to ensure strict conformance to specifications. Verify the conformance of vendor- furnished parts and materials against detailed plans and specifications. Collaborate with production teams to ensure timely inspection functions at designated hold points, optimizing the shop flow of parts. Document comprehensive findings from Visual, Magnetic Particle, Dye Penetrant, and Ultrasonic Testing on official inspection reports. Interpret complex blueprints and engineering specifications to extract critical product information, including material surface, dimensional, and NDT requirements. Precisely measure dimensions such as length, height, diameter, and distance between reference points using advanced precision instruments. Accurately locate reference points on parts and measure intricate dimensions like angles, arcs, and radii. Generate detailed inspection reports and maintain comprehensive welding logs. Perform precise dimensional inspection of components and assemblies. Execute thorough inspections of first-run, in-process, and final fabricated parts and assemblies. Calibrate and test equipment to ensure optimal accuracy and performance. Conduct hardness testing of workpiece surfaces using specialized machinery. Prepare and meticulously maintain calibration records for welding machines and inspection gauges. Develop and maintain accurate Welder Continuity Logs. Role / Department / Location Specific Requirements Reports to the Plant Manager Position is based in Birmingham Alabama Job Requirements 900 hours of Ultrasonic Testing Hours- must provide documentation CWI license preferred, not a deal breaker if can provide proof of UT Knowledge, Skills, and Abilities Demonstrated expertise in Visual and NDT Inspections of fabricated weldments. Proven experience in heavy construction machining or related industrial sectors. Proactive self-starter with exceptional customer service acumen and a positive demeanor, fostering strong working relationships with management and colleagues. Possess excellent dexterity, physical strength, and sustained physical stamina. Strong technical proficiency and the ability to accurately interpret complex blueprints, technical documents, and manuals. Exceptional attention to detail, ensuring precision and accuracy in all tasks. Superior verbal and written communication skills for effective collaboration and reporting. Education requirements or equivalent experience: High school diploma or GED, or equivalent vocational training/experience. Possession of an AWS Certified Welding Inspector (CWI) certification. Minimum of one year of Ultrasonic Testing experience, adhering to AWS D1.1 and AWS D1.5 Codes. Completion of one year of technical school or five years of demonstrated experience in heavy steel fabrication. Proficiency in reading, writing, and fundamental mathematical concepts (fractions, decimals, and trigonometry). Demonstrated ability to independently solve complex technical problems with minimal supervision. Not all aspects of the job are covered by the description - may require other duties as assigned. Job may change over time in accordance with business needs. does not guarantee employment. Working Conditions The work environment involves occasional exposure to dynamic industrial elements, including moving mechanical parts, elevated work areas, fumes or airborne particles, and varying outdoor weather conditions. This may encompass extreme temperatures, humidity, and the presence of chemicals, with a potential for electrical shock and vibration. The ambient noise level is typically moderate. Physical Requirements The role regularly requires physical engagement, including standing, walking, sitting, and utilizing hands for handling and feeling, along with reaching, talking, and hearing. Occasional demands include climbing, balancing, stooping, kneeling, bending, crouching, crawling, and the ability to detect odors. The employee must be capable of occasionally lifting and/or moving up to 50 pounds. Essential visual abilities encompass close vision, distance vision, color vision, peripheral vision, depthperception, and the capacity to adjust focus. Affirmative Action /EEO Statement Steward Machine Company is a Federal VEVRAA contractor, and an Equal Opportunity Employer committed to providing equal employment opportunity in all employment practices. Steward Machine Company will not discriminate against any applicant for employment because of their race, color, religion, sex, national origin, age, sexual orientation, disability, veteran or service member status, marital status, citizenship status (In IL - sex, including same sex, ancestry, order of protection status, physical or mental disability, military status, pregnancy, unfavorable discharge status, genetic information), (In IA - gender identity), (In CA - gender identity or expression, and genetic information) or any other category protected by federal, state or local law. Limitation and Disclaimer The above job description is meant to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties and skills required for the position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor in compliance with Federal and State Laws. Requirements are representative of minimum levels of knowledge, skills and/or abilities. To perform this job successfully, the employee must possess the abilities or aptitudes to perform each duty proficiently. Steward Machine Company is an EEO/AA employer M/F/D/V. It is the Company's policy to provide equal opportunity for all qualified persons and to prohibit discrimination on the basis of race, color, sex, national origin, religion, age, disability, marital status, sexual orientation, gender identity, citizenship status, or any other legally protected status. We maintain a drug-free workplace and reserve the right to perform substance abuse testing as needed.

Inspector A&P ($2,500 Sign-on Bonus) in GAC Savannah Unique Skills: 5th Shift, Weekend Nights, Friday-Sunday, 7:00 PM until 7:30 AM. G650 and/or newer model Flight Safety Initial is prefered, but not required. Strong computer skills necessary for various maintenance data and documentation software. Must be able to lift 50 lbs. Must be able to work from elevated positions to include stands, ladders, lifts, and operations requiring fall harness. Must be able to work in confined spaces. This posion covers a very large hangar and will require much walking from aircraft to aircraft. Education and Experience Requirements High School Diploma or GED required. 6 years aviation maintenance experience (avionics, electrical, and/or mechanical). A&P (FAA Airframe and Powerplant) license required. Position Purpose : Performs inspections of aircraft, aircraft components, and reviews paperwork to ensure that workmanship meets acceptable standards of quality, and that aircraft are returned to service in an airworthy condition with all required. documentation properly completed and filed. Works as an integral part of the Quality Control/Assurance team assuring aircraft/components are in compliance to FAA/CAA requirements. Job Description Principle Duties and Responsibilities: Essential Functions: # Responsible for Quality Control inspections on aircraft/components . # Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data . # Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting . # Keeps accurate, neat and legible records of the work performed on aircraft/components . # Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner . # Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service . # Ensures aircraft/components are airworthy prior to any flight activities . # Mentors technicians on effective documentation . Additional Functions: # Communicates with management as required. to identify work assignments and delivery schedules . # Provides technical support to inspection personnel in supporting the FAA and/or CAA documented requirements . Perform other duties as assigned. Other Requirements: # Strong computer skills. # Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures. # Working knowledge and application of Quality Assurance and/or Quality Control systems and methodologies. # Must be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 228863 Category: Quality Assurance Percentage of Travel: Up to 25% Shift: Weekend Nights Employment Type: Full-time Posting End Date: 10/03/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information Site Utilities Contacts Sitemap Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company . Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

About Us Haskel, an Ingersoll Rand Company, is a High-Pressure Technology Solutions. We specialize in Air-Driven Liquid Pumps, Air-Driven Refrigerant Pumps, Hydraulic Drive Compressors, Gas Booster Compressor System, BuTech High-Pressure Valves and Hydrogen Valves Fitting and Tubing. Job Summary This role is responsible for ensuring the quality control cell is actively engaged to meet daily customer demand and production schedule. Performs receiving, in-process and/or final inspection of hardware. Conducts complex inspections as defined by quality/inspection plans or per directions of quality management/engineering. Uses a complete range of precision tools and instruments requiring advanced inspection skills and techniques. Ensures that all gauges/tools used are properly calibrated. Identify accurate and efficient means of inspection techniques. Works with general/minimal supervision. Train and provide directions to the Quality Control team under the supervision of the Quality Control Manager. Responsibilities The Quality Team Lead will inspect products by using a variety of inspection tools/devices, work instructions and computer to perform a series of inspections to correctly verify incoming parts, in-process and completed assemblies. Verify supplier material certifications, including special processes, and ensure compliance with quality/PO requirements. Creates supporting documentation (data books, certificates of conformance, etc…) Support disposition of discrepant materials (MRB) in accordance with appropriate quality procedures and maintain low inventory of on-hold parts. Verifies first articles from suppliers and internal departments. Prepares and processes records and reports to document supplier/operations performance. Qualify supplier components and/or systems for assuring conforming product. Adheres to calibrations system of inspection, measuring and test equipment. Applies Statistical Quality Control techniques as directed. Assist with interpretation of drawings, specifications and quality requirements. Properly process goods for outside processing, investigates and evaluates component parts returned and nonconforming product. The Quality Team Lead provides effective training to the quality control cell and ensures safety and quality standards are always maintained. Work with supervisor to manage and prioritize staffing assignments to ensure customer demand and the production schedule are met. Use basic problem-solving skills to ensure stable operation of the quality control cell. Report problems or concerns with quality, processes, equipment, materials and labor to Quality management. Work closely with support staff such as Purchasing/Planning, Manufacturing Engineering, Production Supervisor, Materials/Warehouse to resolve issues. Observe, maintain, coordinate and complete standard work. Update production metrics and facilitate regular team communication. Identify and support continuous improvement efforts with Quality management. Sustain and drive lean manufacturing and 5S activities. Follow documented policies and procedures as designated by the company's Quality System. Basic Qualifications Ability to read and interpret documents such as safety rules, engineering drawings, operating and maintenance instructions, Material Standards, Quality Plans, Control Plans and Inspection Test Plans. Experience with Microsoft Office (Word, Excel, Outlook). Ability to communicate effectively through oral and written communications. Ability to analyze and solve problems. Ability to work with others collaboratively. Strong organizational skills. Preferred Experience leading teams or projects strongly desired. Quality Control experience. Lean manufacturing and continual process improvement experience. Educational Requirements High School diploma or equivalent Five years + of related experience and a minimum of two leading teams. LIP Eligible Role This position is eligible for the LIP (Local Incentive Plan) of up to 4%. The pay range takes into account a wide range of factors that are considered in making compensation decisions including, but not limited to, skills; experience and training; licensure and certifications; and other business and organizational needs. The disclosed pay range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At Ingersoll Rand, it is not typical for an individual to be hired at or near the top of the pay range for their role and compensation decisions are dependent on the facts and circumstances of each case. At Ingersoll Rand, we think and act like owners - of our business, our communities, our planet, and our health too. The Ingersoll Rand benefits program provides you with the tools and resources to take accountability for your health so that we can continue to help make life better. Benefits of employment and include; Medical and Prescription drug plans Wellness and Chronic disease management programs Dental, vision, life/AD&D insurance Short- and Long-term disability Health Savings Account Flexible Spending Account Parental Leave Employee Assistance Program Discount Program Employee Stock Grant 401k plan with a company match 3 weeks of paid vacation and 11 paid holidays throughout the calendar year Voluntary benefits include legal, accident, and critical illness protection

Quality Control Inspector II in GAC Savannah Unique Skills: Deep understanding of Gulfstream processes, GAMPS, GER's, MEPS, etc... with related work experience with Gulfstream aircraft test procedures. Ability to interpret complex structural/wiring drawings and specifications with precision. Education and Experience Requirements High School Diploma or GED required. 3 years quality inspection experience required. 5 years manufacturing experience or equivalent aerospace experience preferred.. Other Formal Inspection Training Program 90 Days required. Position Purpose :In a team oriented environment, perform all tasks in Initial Phase Manufacturing, Composites, or Final Phase in a timely and efficient manner to ensure aircraft parts, sub-assemblies, major assemblies, and installations are built to type design data. Job Description Principle Duties and Responsibilities:Essential Functions: Perform inspection duties utilizing engineering drawings and orders, work instructions, technical specifications, QA procedures and instructions, and other related documents. Perform preliminary and progressive inspections of aircraft structure and systems, verify functional operation, final inspections, inspect for FOD and verify paperwork. Witness, verify and document specified manufacturing process steps. Perform conformity/first article inspections to ensure compliance with FAA approved procedures. Perform transfer and consolidated inspections. Ensure the proper use and storage of area tools and equipment. Conduct work in a manner that enhances own/other employees health and safety, product safety and promotes risk reduction; participate openly in safety-related event investigations, and immediately report workplace hazards and make suggestions for control; cooperate and contribute toward the overall success of the Safety program at the local level. Additional Functions: Provide on the job training for subordinate level inspectors. . Coordinate inspection workload according to priorities, efficiency and cost effectiveness. . Provide technical support to manufacturing, engineering and IPT personnel. . Perform duties of MRB signature authority. . Perform area inspections to ensure compliance with applicable standards and specifications. . Lead continuous improvement activities. . Perform other duties as assigned.Other Requirements: Proficient in GAC CATIA or blueprint reading and interpretation, GAC work instructions, technical specifications and GAC QA Manual. Competent in the use of all job related tools and equipment. This job requires one to be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 229707 Category: Quality Assurance Percentage of Travel: None Shift: First Employment Type: Full-time Posting End Date: 12/12/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company . Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

HMT is the global leader in aboveground storage tank solutions. HMT brings a distinct level of innovation and service to the tank industry through a unique approach of partnering with customers to optimize tank operations. Knowing that every customer's need is different, we use our decades of experience to customize solutions that help tank operations become more efficient, more productive, and more profitable. We are seeking an experienced NACE Inspector Level III to perform comprehensive visual inspections and Holiday Tests on the vulcanized rubber liners of three Ecodyn tanks located at Valero Port Arthur, Texas. The NACE Inspector will be responsible for documenting each inspection, identifying any rejected indications, and ensuring proper corrective actions are followed during the repair process. The inspector will also be required to perform in-process inspections and submit daily reports during the repair process. Key Responsibilities: Visual Inspections: Conduct thorough visual inspections of the vulcanized rubber liner inside each of the three Ecodyn tanks to ensure they meet specified standards. Holiday Testing: Perform Holiday Tests on the rubber linings of each tank to identify any coating defects or discontinuities. Reporting: Document findings in clear and detailed reports for each tank, including any areas of concern or defects identified during the inspection. Rejected Indications: If any rejected indications or defects are found, follow the approved repair process and ensure all necessary repairs are completed. In-Process Inspections: Conduct in-process inspections during the repair phase to ensure the quality and compliance of repairs. Daily Reports: Submit daily reports during the repair process to document progress, any issues, and resolutions. Compliance: Ensure all inspection activities comply with applicable standards, including NACE and industry-specific guidelines. Collaboration: Work closely with the maintenance and repair teams to ensure timely and effective repairs. Required Qualifications: NACE Level III Certification (or equivalent) in Coating Inspection. Proven experience performing visual inspections and Holiday Testing, particularly on rubber linings. Strong understanding of coating inspection standards and procedures. Ability to work independently and manage inspection tasks for multiple tanks. Familiarity with reporting requirements and documentation of inspection and repair activities. Excellent attention to detail and ability to identify and report defects or non-compliance issues. Strong communication skills for reporting findings to management and working with the repair teams. Preferred Qualifications: Experience in the oil and gas or chemical industries, specifically with tank linings or coatings. Previous experience performing inspections on tanks or similar equipment. Physical Requirements: Ability to work in various weather conditions, including outdoor environments. Ability to access confined spaces and elevated areas when necessary. Able to bend and lift up to 20 lbs. Working Hours: Full-time, with daily reporting during inspection and repair phases. Flexibility in hours may be required to accommodate repair schedules. HMT is an Equal Employment Opportunity Employer. We will not tolerate discrimination because of race, color, religion, sex, age, national origin, military or veteran status, mental or physical disability, genetic information, gender, gender identity or expression, sexual expression, or any other unlawful reason. All qualified applicants are encouraged to submit applications for employment. Employment with HMT is At-Will.

Job Title: Distribution Inspector 3Location: Rio Grande Valley Service Area/El Paso Service AreaKey Responsibilities:Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping. Spearhead capital rebuild and relocation projects, overseeing every aspect from planning to execution, ensuring seamless operations and compliance with industry standards. Utilize techniques and technologies to identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities. Ensure all inspections meet or exceed industry regulations and standards. Foster strong relationships with clients and internal teams, delivering clear, concise, and actionable insights from inspections, fostering a culture of collaboration and excellence. Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications:5-6 years of hands-on experience in pipeline inspection, with a focus on capital rebuilds, relocations, and leak detection. API 1169 CertificationProven expertise in overseeing large-scale projects, from start to finish. Exceptional problem-solving skills and attention to detail, with a focus on precision and accuracy in all aspects of inspection and reporting. Strong communication skills with the ability to work effectively in a team environment. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Title: Distribution Inspector Level 3Location: El Paso, TXDuration: Long TermDescription:· Must be able to monitor work performed by contractors hired by Company on gas pipeline and service installations, replacements, and relocations within Company's service area. · Work shall be performed in accordance with Company standards and 49 CFR 192· Oversee transmission projects, ensuring the integrity, safety, and compliance of pipelines. Qualifications:· Minimum of 6 years of hands-on experience in pipeline inspection, with a specialized focus on poly fusion projects. · Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, TVC, and ONE MAP. · CPWI· API 1169· Identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities. · Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Title: Distribution Inspector 3Location: Austin, TXKey Responsibilities:Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping. Spearhead capital rebuild and relocation projects, overseeing every aspect from planning to execution, ensuring seamless operations and compliance with industry standards. Utilize techniques and technologies to identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities. Ensure all inspections meet or exceed industry regulations and standards. Foster strong relationships with clients and internal teams, delivering clear, concise, and actionable insights from inspections, fostering a culture of collaboration and excellence. Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications:5-6 years of hands-on experience in pipeline inspection, with a focus on capital rebuilds, relocations, and leak detection. API 1169 CertificationProven expertise in overseeing large-scale projects, from start to finish. Exceptional problem-solving skills and attention to detail, with a focus on precision and accuracy in all aspects of inspection and reporting. Strong communication skills with the ability to work effectively in a team environment. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Skills Inc., one of Washington State's largest aerospace suppliers offers world-class, competitively-priced products and services which exceed customer's requirements for rigorous standards and excellence. We are a fully integrated, self-funded non-profit with a social mission to train, employ, and serve persons with disabilities and our community. JOB SUMMARY As part of our recent growth, we are seeking an experienced Dimensional Inspector to join our team. The ideal candidate will conduct dimensional inspection of machined parts for aerospace and commercial customers. ESSENTIAL DUTIES AND RESPONSIBILITIES • Assure machined/assembled/formed parts meet the drawing, document, and customer requirements. • Dimensional inspection of assemblies and components, including aircraft hardware standards. • Perform first part and in process inspections at the shop floor level • Ability to develop a working knowledge of Skills' Quality system and related procedures. • Has a working knowledge of non-conforming materials and procedures. PREFERRED QUALIFICATIONS • Thorough understanding of aerospace and commercial drawings, parts lists and associated documents • Familiarity with aerospace requirements for assembly components and assembly procedures • Familiarity with Boeing Aerospace Company specifications • Use of aerospace dimensional inspection, measuring equipment • Basic familiarity with Windows based PCs and related applications, especially MS Office • Knowledge of and ability to apply basic mathematical skills to the work environment • Ability to define problems, collect data, establish facts, and draw valid conclusions LANGUAGE SKILLS • Ability to read, write, communicate, and/or follow written and verbal instructions in English. • Ability to communicate in English through voice, American Sign Language, or adaptive technology. CONFIDENTIALITY The responsibilities of this position may require an individual to access and hold in confidence certain information. This means that information and/or documentation acquired about employees, suppliers, customers, business practices, and all other related information remains confidential. ITAR - US PERSON STATUS Due to Skills Inc.'s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed, or shared by US Persons as defined by law. A "US Person" can be a US citizen; a lawful permanent legal resident or an individual who has been admitted as a refugee or asylee. PHYSICAL DEMANDS/WORK ENVIRONMENT The physical demands and work environment described here are representative of those that must be met by the employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Frequent periods of standing and /or walking • Constant periods of sitting at a work station • Frequently able to lift or move up to 40 lbs. • Frequent repetitive motions • Constant exposure to indoor manufacturing environment • Occasional exposure to chemicals, odors, and fumes • Occasional exposure to loud noises Definitions: Constant (5-8 hrs. /shift) Frequent (2-5 hrs. /shift) Occasional (Up to 2 hrs. /shift) SHIFT SCHEDULE 4th shift; Friday-Sunday 6am-6:30pm TOTAL REWARDS SUMMARY At Skills Inc., our most important partnership is the one we share with our employees. We are dedicated to supporting the health and well-being of our employees and their dependents, which is why we offer a comprehensive and valuable benefits package that includes medical, dental, vision, life and AD&D insurance, paid time off, and a 401(k) savings plan to eligible employees. SALARY PAY RANGE Please note that the salary information shown below is a general guideline only. Salaries are based upon candidate experience and qualifications, as well as market and business considerations. Skills Inc. is a self-supporting Social Enterprise and is organized as a 501 (c) (3) non-profit. We have four lines of business; Aerospace Manufacturing, Aerospace Finishing, Technical Services, and Business Solutions, that operate in 2 locations. Skills Inc. employs over 250 people and our social mission is to train, employ and serve persons with disabilities. We accomplish our mission three ways; direct hire, vocational programs and services, and as a resource to the community. Salary Range: $17.00-$32.00 • 4th shift is eligible for a shift differential based on 36 hours BENEFITS SUMMARY • Paid Vacation* • Paid Sick • 401(k) with a percentage company-match contribution* • Paid holidays*- prorated based on shift • Medical, dental, vision, and life insurance* • Employee Assistance Plan EEO and ADA STATEMENT Skills Inc. is committed to cultivating a culture of diversity, equity, and inclusion. We invite employees, participants in our services, vendors, and customers to bring their authentic selves to every interaction. We strive to represent the communities in which we serve. We aspire to see and value people across the spectrums of age, ability, gender, race, sexual orientation, perspectives, and other visible and invisible differences. Skills Inc. embraces equitable practices at the center of our daily work and believes our organization is stronger for it. Skills Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. OTHER DUTIES This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required. New responsibilities, activities, and duties may be modified or added at any time by a member of the management team. 4th shift; Friday-Sunday 6am-6:30pm

Skills Inc., one of Washington State's largest aerospace suppliers offers world-class, competitively-priced products and services which exceed customer's requirements for rigorous standards and excellence. We are a fully integrated, self-funded non-profit with a social mission to train, employ, and serve persons with disabilities and our community. JOB SUMMARY As part of our recent growth, we are seeking an experienced Dimensional Inspector to join our team. The ideal candidate will conduct dimensional inspection of machined parts for aerospace and commercial customers. ESSENTIAL DUTIES AND RESPONSIBILITIES * Assure machined/assembled/formed parts meet the drawing, document, and customer requirements. * Dimensional inspection of assemblies and components, including aircraft hardware standards. * Perform first part and in process inspections at the shop floor level * Ability to develop a working knowledge of Skills' Quality system and related procedures. * Has a working knowledge of non-conforming materials and procedures. PREFERRED QUALIFICATIONS * Thorough understanding of aerospace and commercial drawings, parts lists and associated documents * Familiarity with aerospace requirements for assembly components and assembly procedures * Familiarity with Boeing Aerospace Company specifications * Use of aerospace dimensional inspection, measuring equipment * Basic familiarity with Windows based PCs and related applications, especially MS Office * Knowledge of and ability to apply basic mathematical skills to the work environment * Ability to define problems, collect data, establish facts, and draw valid conclusions LANGUAGE SKILLS * Ability to read, write, communicate, and/or follow written and verbal instructions in English. * Ability to communicate in English through voice, American Sign Language, or adaptive technology. CONFIDENTIALITY The responsibilities of this position may require an individual to access and hold in confidence certain information. This means that information and/or documentation acquired about employees, suppliers, customers, business practices, and all other related information remains confidential. ITAR - US PERSON STATUS Due to Skills Inc.'s participation in the defense industry, International Traffic in Arms Regulations (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed, or shared by US Persons as defined by law. A "US Person" can be a US citizen; a lawful permanent legal resident or an individual who has been admitted as a refugee or asylee. PHYSICAL DEMANDS/WORK ENVIRONMENT The physical demands and work environment described here are representative of those that must be met by the employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Frequent periods of standing and /or walking * Constant periods of sitting at a work station * Frequently able to lift or move up to 40 lbs. * Frequent repetitive motions * Constant exposure to indoor manufacturing environment * Occasional exposure to chemicals, odors, and fumes * Occasional exposure to loud noises Definitions: Constant (5-8 hrs. /shift) Frequent (2-5 hrs. /shift) Occasional (Up to 2 hrs. /shift) SHIFT SCHEDULE 1st Shift; Monday-Friday 7:00am-3:30pm TOTAL REWARDS SUMMARY At Skills Inc., our most important partnership is the one we share with our employees. We are dedicated to supporting the health and well-being of our employees and their dependents, which is why we offer a comprehensive and valuable benefits package that includes medical, dental, vision, life and AD&D insurance, paid time off, and a 401(k) savings plan to eligible employees. SALARY PAY RANGE Please note that the salary information shown below is a general guideline only. Salaries are based upon candidate experience and qualifications, as well as market and business considerations. Skills Inc. is a self-supporting Social Enterprise and is organized as a 501 (c) (3) non-profit. We have four lines of business; Aerospace Manufacturing, Aerospace Finishing, Technical Services, and Business Solutions, that operate in 2 locations. Skills Inc. employs over 250 people and our social mission is to train, employ and serve persons with disabilities. We accomplish our mission three ways; direct hire, vocational programs and services, and as a resource to the community. Salary Range: $17.00-$32.00 BENEFITS SUMMARY * Paid Vacation* * Paid Sick * 401(k) with a percentage company-match contribution* * Paid holidays*- prorated based on shift * Medical, dental, vision, and life insurance* * Employee Assistance Plan EEO and ADA STATEMENT Skills Inc. is committed to cultivating a culture of diversity, equity, and inclusion. We invite employees, participants in our services, vendors, and customers to bring their authentic selves to every interaction. We strive to represent the communities in which we serve. We aspire to see and value people across the spectrums of age, ability, gender, race, sexual orientation, perspectives, and other visible and invisible differences. Skills Inc. embraces equitable practices at the center of our daily work and believes our organization is stronger for it. Skills Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. OTHER DUTIES This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required. New responsibilities, activities, and duties may be modified or added at any time by a member of the management team. 1st Shift Monday-Friday 7:00am-3:30pm

Job Title: Natural Gas Distribution Inspector Level 2Location: South East, TXKey Responsibilities:Conduct comprehensive inspections of pipelines, focusing on line extensions and rebuild services, to guarantee compliance with industry standards and regulations.Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping.Collaborate closely with engineering teams to develop effective inspection strategies and contribute to the planning of line extension projects and rebuild services.Provide technical expertise to support decision-making processes related to pipeline maintenance, repair, and replacement.Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications:Minimum of 2-4 years of hands-on experience in pipeline inspection, with a focus on line extensions and rebuild services.In-depth knowledge of pipeline construction, maintenance, and repair processes, particularly related to line extensions and rebuild projects.Familiarity with industry-specific software and tools.Strong analytical skills and attention to detail, with the ability to identify and assess potential issues in pipelines.Excellent communication skills with the ability to work within a team. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

The API Inspector is responsible for performing inspections on pressure vessels, piping, tanks, and other static mechanical equipment in accordance with applicable API codes (e.g., API 510, API 570, API 653). The role ensures the mechanical integrity and safety compliance of assets during operations, turnarounds, and outages. Key Responsibilities: Conduct internal and external inspections of equipment in accordance with API 510, 570, and/or 653 standards. Evaluate the condition and integrity of pressure vessels, piping systems, and aboveground storage tanks. Prepare detailed inspection reports and document findings using digital reporting tools or databases. Interpret and apply applicable codes, standards, and client specifications. Coordinate with engineering, maintenance, and operations teams to prioritize inspection tasks. Recommend repair or replacement strategies based on inspection findings. Assist with developing inspection plans and schedules for routine and turnaround inspections. Maintain inspection certifications and stay current with updates to API codes and best practices.

The inspector assures control of the product while being produced on the machines as well as final inspection prior to shipment

The inspector assures control of the product while being produced on the machines as well as final inspection prior to shipment •The employee must have the ability to perform inspection functions such as visual inspection to detect cosmetic defects and color differentiation of products •Attendance and punctuality are essential functions of this position. Any unscheduled absence or tardy will have a negative impact on our ability to meet our production objectives •Physical aspects of the job are defined on the Physical Demands Analysis located in HR •The ability to carry out oral and written instructions along with the ability to adapt to different situations. •Must have the ability to acquire a thorough knowledge of all testing and measuring devices. •Must be able to sit for extended periods, walk extensively, and produce a high quality product.