Quality Control Technician jobs at TrueNet - 72 jobs

The Quality Control Technician inspects work performed by client employees, internal employees, or client subcontractors. Work is inspected for process and specification compliance against company/client guidelines. (This purpose is meant to be a guide. Duties may vary dependent upon client.) Essential Position Functions: Inspect assigned work locations for compliance with client or company specifications and guidelines. Inspections may include but are not limited to work safety, installation, and troubleshooting compliance. Use appropriate testing equipment based upon client specifications. Assist in preparing and developing inspection instructions and procedures. Develop and create project specific checklists and standards. Record and document inspection results and findings in applicable data sheets and forms. Complete and submit inspection documentation to the appropriate supervisory personnel. Ensure completion of inspections in a timely manner and track/report activities and metrics. Drive safely to work sites and comply with all company/client safety standards. Follow company/client standards by using related technical documentation. Deliver feedback and supplemental training to employees/contractors as required. Other duties assigned. Education and/or Experience: High School diploma or GED preferred. 2 or more years of relevant inspection experience from the telecommunications, construction, or utilities industries. Equivalent, applicable experience in lower level role may be substituted. Must be proficient with a Windows and Android operating systems (proficiency with a tablet is preferred). Must be proficient with Microsoft office applications (emphasis on Excel). Must be able to read blueprints and other technical documentation. Must be able to operate testing equipment relevant to the inspections such as an OTDR. Experience with a major MSO or Telecom Operator is preferred. Strong analytical and problem-solving ability required. Ability to prioritize and complete assignments accurately and in a timely manner. Able to effectively handle multiple priorities with a strong attention to detail in a fast-paced environment. Strong interpersonal, organizational, oral and written communications skills. Must be able to work alone, and with a team. Must be able to pass a drug screen and criminal background check. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Frequent walking, standing, sitting within the work area. Lifting of up to 50 pounds less than one-third of the time. Ability to sit/stand/walk for extended periods of time. Ability to effectively communicate with employees, management, peers, et al. Ability to work in extreme hot/cold environments for lengthy periods of time. Work Environment: The work environment characteristics described here are representative of those of a standard office environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Travel up to 100% required. Ability to work in all temperatures, climates and weather conditions. The work environment is that of being in the field. The position requires working independently, as well as part of a team. This position requires verbal and face-to-face contact with others daily. Frequent use of a computer is necessary. This position requires use of all general office equipment.

At Switch, we don t just design, build and operate data centers we are enabling the technology of the future. Led by Founder & CEO, Rob Roy, we believe in revolutionary innovation, operational excellence and the principle of karma. Switch is where talented people come together to EVOLVE the digital world. We believe that innovation isn t just about technology it s about the people, culture, and purpose that make it happen. Every Switch team member contributes to a mission greater than themselves: to create the world s most advanced digital infrastructure that powers the progress of humanity. The Role: QA Technician As a QA Technician at Switch, you will be part of a world-class team that operates in excellence, delivering mission-critical solutions that redefine what s possible in AI, cloud and enterprise data center needs. Your work will directly impact the future of technology and the sustainable growth of the Internet. In this role your primary responsibility will be the general organization, preservation and cleanliness of the facilities with an emphasis on customer space. The main areas of responsibility will include but are not limited to: customer and employee common areas, data floor, exterior of the building and around the perimeter, all pertaining to aesthetics. What You ll Do General facility upkeep/maintenance which may entail: Floor repair such as carpet, VCT & Gerflor tiles. Wall repair/ patching, texturing & painting. Repairing damaged baseboards and corer guards. Bulb replacements inside and outside T-SCIFs. Maintaining the Switch standard in all areas. Materials handling and installation. Facility set-up (Client cage) per defined company standards. Perform regular cage audits to existing clients. Help maintain and monitor the facility cleanliness. Maintain T-SCIF cleanliness and organization of defined space. Communicate with the warehouse and coordinate stock deliveries. Use of basic warehouse equipment (pallet jack, forklift). May at times assist with Facility Maintenance tasks. What We re Looking For Innovators & Builders You see challenges as opportunities and thrive in uncharted territories. High-Performance Thinkers You have a relentless drive for excellence and a passion for pushing the envelope. You thrive in high impact environments where execution is key. Integrity-Driven Leaders You operate with honor, responsibility, and purpose, recognizing that the energy you put out into the world will return to you. Tech Pioneers You understand the power of technology to change the world and want to be at the forefront of that transformation. What You'll Bring Experience with organization and spatial layout A demonstrated ability for dimensional measurement Able to read and understand schematics related to space layout. Excellent attention to detail, presentation and customer service skills Ability to solve problems with good initiative and sound judgement Excellent time management skills and the ability to work alone or with team members. Excellent communication skills with team members, management and customers A minimum of 2 years experience in production, facilities, mechanical maintenance or relevant field. Able to work both indoors and outdoors while utilizing environmental safety practices. Able to frequently lift and/or move up to 20 pounds and occasionally lift and/or move up to 50 pounds. Able to regularly stand, walk, bend, use hands, carry supplies, operate power tools, perform work on a ladder and have specific vision abilities to include close and distance vision. Able to work both indoors and outdoors while utilizing environmental safety practices in order to perform exterior facility work as needed. Why Switch? A Culture of Karma We are self-motivated by karma, ensuring our actions contribute to a positive, supportive and forward-thinking environment. Industry Leading Designs Work with the most advanced data center technology on the planet and be a part of emerging technology development. Flexibility & Remote Opportunities Whether in-office, hybrid, or fully remote, we offer the technology and support to keep teams connected and productive. Career Stability & Growth In this expanding industry, we invest in our people, providing opportunities & advancement in a stable, growing company. Generous Benefits Package - Switch provides comprehensive coverage for you and your family that can be tailored to fit your personal needs, and more! Join Us & Make a Difference This is more than a job it s a mission. If you re ready to be part of a culture that values innovation, karma, and limitless potential, we want to hear from you. Apply Now and Let s Build the Future Together.

About Switch At Switch, we dont just design, build and operate data centerswe are enabling the technology of the future. Led by Founder & CEO, Rob Roy, we believe in revolutionary innovation, operational excellence and the principle of karma. Switch is where talented people come together to EVOLVE the digital world. We believe that innovation isnt just about technologyits about the people, culture, and purpose that make it happen. Every Switch team member contributes to a mission greater than themselves: to create the worlds most advanced digital infrastructure that powers the progress of humanity. The Role: QA Technician As a QA Technician at Switch, you will be part of a world-class team that operates in excellence, delivering mission-critical solutions that redefine whats possible in AI, cloud and enterprise data center needs. Your work will directly impact the future of technology and the sustainable growth of the Internet. In this role your primary responsibility will be the general organization, preservation and cleanliness of the facilities with an emphasis on customer space. The main areas of responsibility will include but are not limited to: customer and employee common areas, data floor, exterior of the building and around the perimeter, all pertaining to aesthetics. What Youll Do * General facility upkeep/maintenance which may entail: * Floor repair such as carpet, VCT & Gerflor tiles. * Wall repair/ patching, texturing & painting. * Repairing damaged baseboards and corer guards. * Bulb replacements inside and outside T-SCIFs. * Maintaining the Switch standard in all areas. * Materials handling and installation. * Facility set-up (Client cage) per defined company standards. * Perform regular cage audits to existing clients. * Help maintain and monitor the facility cleanliness. * Maintain T-SCIF cleanliness and organization of defined space. * Communicate with the warehouse and coordinate stock deliveries. * Use of basic warehouse equipment (pallet jack, forklift). * May at times assist with Facility Maintenance tasks. What Were Looking For * Innovators & Builders You see challenges as opportunities and thrive in uncharted territories. * High-Performance Thinkers You have a relentless drive for excellence and a passion for pushing the envelope. You thrive in high impact environments where execution is key. * Integrity-Driven Leaders You operate with honor, responsibility, and purpose, recognizing that the energy you put out into the world will return to you. * Tech Pioneers You understand the power of technology to change the world and want to be at the forefront of that transformation. What You'll Bring * Experience with organization and spatial layout * A demonstrated ability for dimensional measurement * Able to read and understand schematics related to space layout. * Excellent attention to detail, presentation and customer service skills * Ability to solve problems with good initiative and sound judgement * Excellent time management skills and the ability to work alone or with team members. * Excellent communication skills with team members, management and customers * A minimum of 2 years experience in production, facilities, mechanical maintenance or relevant field. * Able to work both indoors and outdoors while utilizing environmental safety practices. * Able to frequently lift and/or move up to 20 pounds and occasionally lift and/or move up to 50 pounds. * Able to regularly stand, walk, bend, use hands, carry supplies, operate power tools, perform work on a ladder and have specific vision abilities to include close and distance vision. * Able to work both indoors and outdoors while utilizing environmental safety practices in order to perform exterior facility work as needed. Why Switch? * A Culture of Karma We are self-motivated by karma, ensuring our actions contribute to a positive, supportive and forward-thinking environment. * Industry Leading Designs Work with the most advanced data center technology on the planet and be a part of emerging technology development. * Flexibility & Remote Opportunities Whether in-office, hybrid, or fully remote, we offer the technology and support to keep teams connected and productive. * Career Stability & Growth In this expanding industry, we invest in our people, providing opportunities & advancement in a stable, growing company. * Generous Benefits Package - Switch provides comprehensive coverage for you and your family that can be tailored to fit your personal needs, and more! Join Us & Make a Difference This is more than a jobits a mission. If youre ready to be part of a culture that values innovation, karma, and limitless potential, we want to hear from you. Apply Now and Lets Build the Future Together.

Job Description The Quality Control Technician inspects work performed by client employees, internal employees, or client subcontractors. Work is inspected for process and specification compliance against company/client guidelines. (This purpose is meant to be a guide. Duties may vary dependent upon client.) Essential Position Functions: Inspect assigned work locations for compliance with client or company specifications and guidelines. Inspections may include but are not limited to work safety, installation, and troubleshooting compliance. Use appropriate testing equipment based upon client specifications. Assist in preparing and developing inspection instructions and procedures. Develop and create project specific checklists and standards. Record and document inspection results and findings in applicable data sheets and forms. Complete and submit inspection documentation to the appropriate supervisory personnel. Ensure completion of inspections in a timely manner and track/report activities and metrics. Drive safely to work sites and comply with all company/client safety standards. Follow company/client standards by using related technical documentation. Deliver feedback and supplemental training to employees/contractors as required. Other duties assigned. Education and/or Experience: High School diploma or GED preferred. 2 or more years of relevant inspection experience from the telecommunications, construction, or utilities industries. Equivalent, applicable experience in lower level role may be substituted. Must be proficient with a Windows and Android operating systems (proficiency with a tablet is preferred). Must be proficient with Microsoft office applications (emphasis on Excel). Must be able to read blueprints and other technical documentation. Must be able to operate testing equipment relevant to the inspections such as an OTDR. Experience with a major MSO or Telecom Operator is preferred. Strong analytical and problem-solving ability required. Ability to prioritize and complete assignments accurately and in a timely manner. Able to effectively handle multiple priorities with a strong attention to detail in a fast-paced environment. Strong interpersonal, organizational, oral and written communications skills. Must be able to work alone, and with a team. Must be able to pass a drug screen and criminal background check. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Frequent walking, standing, sitting within the work area. Lifting of up to 50 pounds less than one-third of the time. Ability to sit/stand/walk for extended periods of time. Ability to effectively communicate with employees, management, peers, et al. Ability to work in extreme hot/cold environments for lengthy periods of time. Work Environment: The work environment characteristics described here are representative of those of a standard office environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Travel up to 100% required. Ability to work in all temperatures, climates and weather conditions. The work environment is that of being in the field. The position requires working independently, as well as part of a team. This position requires verbal and face-to-face contact with others daily. Frequent use of a computer is necessary. This position requires use of all general office equipment. Powered by JazzHR IMKYuUqsez

Job Description The Quality Control Technician inspects work performed by client employees, internal employees, or client subcontractors. Work is inspected for process and specification compliance against company/client guidelines. (This purpose is meant to be a guide. Duties may vary dependent upon client.) Essential Position Functions: Inspect assigned work locations for compliance with client or company specifications and guidelines. Inspections may include but are not limited to work safety, installation, and troubleshooting compliance. Use appropriate testing equipment based upon client specifications. Assist in preparing and developing inspection instructions and procedures. Develop and create project specific checklists and standards. Record and document inspection results and findings in applicable data sheets and forms. Complete and submit inspection documentation to the appropriate supervisory personnel. Ensure completion of inspections in a timely manner and track/report activities and metrics. Drive safely to work sites and comply with all company/client safety standards. Follow company/client standards by using related technical documentation. Deliver feedback and supplemental training to employees/contractors as required. Other duties assigned. Education and/or Experience: High School diploma or GED preferred. 2 or more years of relevant inspection experience from the telecommunications, construction, or utilities industries. Equivalent, applicable experience in lower level role may be substituted. Must be proficient with a Windows and Android operating systems (proficiency with a tablet is preferred). Must be proficient with Microsoft office applications (emphasis on Excel). Must be able to read blueprints and other technical documentation. Must be able to operate testing equipment relevant to the inspections such as an OTDR. Experience with a major MSO or Telecom Operator is preferred. Strong analytical and problem-solving ability required. Ability to prioritize and complete assignments accurately and in a timely manner. Able to effectively handle multiple priorities with a strong attention to detail in a fast-paced environment. Strong interpersonal, organizational, oral and written communications skills. Must be able to work alone, and with a team. Must be able to pass a drug screen and criminal background check. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Frequent walking, standing, sitting within the work area. Lifting of up to 50 pounds less than one-third of the time. Ability to sit/stand/walk for extended periods of time. Ability to effectively communicate with employees, management, peers, et al. Ability to work in extreme hot/cold environments for lengthy periods of time. Work Environment: The work environment characteristics described here are representative of those of a standard office environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Travel up to 100% required. Ability to work in all temperatures, climates and weather conditions. The work environment is that of being in the field. The position requires working independently, as well as part of a team. This position requires verbal and face-to-face contact with others daily. Frequent use of a computer is necessary. This position requires use of all general office equipment. Powered by JazzHR AyuqLJQQb2

Quality techs are needed at a brand new Automotive facility in Lake Orion. . You have to be able to use measuring devices like micrometers and calipers, gage the parts, report them and make sure production is running smoothly. At least 1 year of experience. Split shift and afternoon shift available. 1:30pm-10pm Monday-Friday at $18/hr Respond to this add or call ************.

The QA Technician must be skilled at identifying possible problems throughout the production process and to use their intuition to problem-solve. They must also take meticulous notes, be organized about recording process steps, and work well with others. Mechanical aptitude a plus. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. * Performs routing inspection checks using established processes and procedures. * Participates in the material review board, investigates non-conforming issues/product to determine root cause and follows established procedures for disposition. * Supports the internal processes, provide instruction and guidance wherever needed. * Works closely with the Quality group in measuring and testing product and tabulating data concerning materials, product, or process quality and reliability. * Performs RMA duties as required, returns non-conforming product back to the supplier. Other duties may be assigned. REQUIRED COMPETENCY To perform the job successfully, an individual should demonstrate the following competencies : Quality - Demonstrates accuracy and thoroughness; mechanical ability, detail-oriented and should work well with established processes. Looks for ways to improve and promote quality; applies feedback to improve performance; monitors own work to ensure quality. Quantity - Meets productivity standards; completes work in timely manner; strives to increase productivity; works quickly. Safety and Security - Observes safety and security procedures; determines appropriate action beyond guidelines; reports potentially unsafe conditions; uses equipment and materials properly. SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Associate's degree (A. A.) or equivalent from two-year college or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. MATHEMATICAL SKILLS Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. CERTIFICATES, LICENSES, REGISTRATIONS PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to stand and walk. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions

Job Description The Quality Control Technician inspects work performed by client employees, internal employees, or client subcontractors. Work is inspected for process and specification compliance against company/client guidelines. (This purpose is meant to be a guide. Duties may vary dependent upon client.) Essential Position Functions: Inspect assigned work locations for compliance with client or company specifications and guidelines. Inspections may include but are not limited to work safety, installation, and troubleshooting compliance. Use appropriate testing equipment based upon client specifications. Assist in preparing and developing inspection instructions and procedures. Develop and create project specific checklists and standards. Record and document inspection results and findings in applicable data sheets and forms. Complete and submit inspection documentation to the appropriate supervisory personnel. Ensure completion of inspections in a timely manner and track/report activities and metrics. Drive safely to work sites and comply with all company/client safety standards. Follow company/client standards by using related technical documentation. Deliver feedback and supplemental training to employees/contractors as required. Other duties assigned. Education and/or Experience: High School diploma or GED preferred. 2 or more years of relevant inspection experience from the telecommunications, construction, or utilities industries. Equivalent, applicable experience in lower level role may be substituted. Must be proficient with a Windows and Android operating systems (proficiency with a tablet is preferred). Must be proficient with Microsoft office applications (emphasis on Excel). Must be able to read blueprints and other technical documentation. Must be able to operate testing equipment relevant to the inspections such as an OTDR. Experience with a major MSO or Telecom Operator is preferred. Strong analytical and problem-solving ability required. Ability to prioritize and complete assignments accurately and in a timely manner. Able to effectively handle multiple priorities with a strong attention to detail in a fast-paced environment. Strong interpersonal, organizational, oral and written communications skills. Must be able to work alone, and with a team. Must be able to pass a drug screen and criminal background check. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Frequent walking, standing, sitting within the work area. Lifting of up to 50 pounds less than one-third of the time. Ability to sit/stand/walk for extended periods of time. Ability to effectively communicate with employees, management, peers, et al. Ability to work in extreme hot/cold environments for lengthy periods of time. Work Environment: The work environment characteristics described here are representative of those of a standard office environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Travel up to 100% required. Ability to work in all temperatures, climates and weather conditions. The work environment is that of being in the field. The position requires working independently, as well as part of a team. This position requires verbal and face-to-face contact with others daily. Frequent use of a computer is necessary. This position requires use of all general office equipment. Powered by JazzHR FB9jfD4zue

The Quality Control Technician inspects work performed by client employees, internal employees, or client subcontractors. Work is inspected for process and specification compliance against company/client guidelines. (This purpose is meant to be a guide. Duties may vary dependent upon client.) Essential Position Functions: Inspect assigned work locations for compliance with client or company specifications and guidelines. Inspections may include but are not limited to work safety, installation, and troubleshooting compliance. Use appropriate testing equipment based upon client specifications. Assist in preparing and developing inspection instructions and procedures. Develop and create project specific checklists and standards. Record and document inspection results and findings in applicable data sheets and forms. Complete and submit inspection documentation to the appropriate supervisory personnel. Ensure completion of inspections in a timely manner and track/report activities and metrics. Drive safely to work sites and comply with all company/client safety standards. Follow company/client standards by using related technical documentation. Deliver feedback and supplemental training to employees/contractors as required. Other duties assigned. Education and/or Experience: High School diploma or GED preferred. 2 or more years of relevant inspection experience from the telecommunications, construction, or utilities industries. Equivalent, applicable experience in lower level role may be substituted. Must be proficient with a Windows and Android operating systems (proficiency with a tablet is preferred). Must be proficient with Microsoft office applications (emphasis on Excel). Must be able to read blueprints and other technical documentation. Must be able to operate testing equipment relevant to the inspections such as an OTDR. Experience with a major MSO or Telecom Operator is preferred. Strong analytical and problem-solving ability required. Ability to prioritize and complete assignments accurately and in a timely manner. Able to effectively handle multiple priorities with a strong attention to detail in a fast-paced environment. Strong interpersonal, organizational, oral and written communications skills. Must be able to work alone, and with a team. Must be able to pass a drug screen and criminal background check. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Frequent walking, standing, sitting within the work area. Lifting of up to 50 pounds less than one-third of the time. Ability to sit/stand/walk for extended periods of time. Ability to effectively communicate with employees, management, peers, et al. Ability to work in extreme hot/cold environments for lengthy periods of time. Work Environment: The work environment characteristics described here are representative of those of a standard office environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Travel up to 100% required. Ability to work in all temperatures, climates and weather conditions. The work environment is that of being in the field. The position requires working independently, as well as part of a team. This position requires verbal and face-to-face contact with others daily. Frequent use of a computer is necessary. This position requires use of all general office equipment.

The Quality Control Technician inspects work performed by client employees, internal employees, or client subcontractors. Work is inspected for process and specification compliance against company/client guidelines. (This purpose is meant to be a guide. Duties may vary dependent upon client.) Essential Position Functions: * Inspect assigned work locations for compliance with client or company specifications and guidelines. * Inspections may include but are not limited to work safety, installation, and troubleshooting compliance. * Use appropriate testing equipment based upon client specifications. * Assist in preparing and developing inspection instructions and procedures. * Develop and create project specific checklists and standards. * Record and document inspection results and findings in applicable data sheets and forms. * Complete and submit inspection documentation to the appropriate supervisory personnel. * Ensure completion of inspections in a timely manner and track/report activities and metrics. * Drive safely to work sites and comply with all company/client safety standards. * Follow company/client standards by using related technical documentation. * Deliver feedback and supplemental training to employees/contractors as required. * Other duties assigned. Education and/or Experience: * High School diploma or GED preferred. * 2 or more years of relevant inspection experience from the telecommunications, construction, or utilities industries. Equivalent, applicable experience in lower level role may be substituted. * Must be proficient with a Windows and Android operating systems (proficiency with a tablet is preferred). * Must be proficient with Microsoft office applications (emphasis on Excel). * Must be able to read blueprints and other technical documentation. * Must be able to operate testing equipment relevant to the inspections such as an OTDR. * Experience with a major MSO or Telecom Operator is preferred. * Strong analytical and problem-solving ability required. * Ability to prioritize and complete assignments accurately and in a timely manner. * Able to effectively handle multiple priorities with a strong attention to detail in a fast-paced environment. * Strong interpersonal, organizational, oral and written communications skills. * Must be able to work alone, and with a team. * Must be able to pass a drug screen and criminal background check. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Frequent walking, standing, sitting within the work area. * Lifting of up to 50 pounds less than one-third of the time. * Ability to sit/stand/walk for extended periods of time. * Ability to effectively communicate with employees, management, peers, et al. * Ability to work in extreme hot/cold environments for lengthy periods of time. Work Environment: The work environment characteristics described here are representative of those of a standard office environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Travel up to 100% required. * Ability to work in all temperatures, climates and weather conditions. * The work environment is that of being in the field. * The position requires working independently, as well as part of a team. * This position requires verbal and face-to-face contact with others daily. * Frequent use of a computer is necessary. * This position requires use of all general office equipment.

At Three Notch Group, we are a leading civil engineering firm with over 75 years of experience, dedicated to delivering a wide range of services, including Field and Lab Services, UST, Environmental, Utility, Transportation, Geotechnical & Construction Engineering, and Civil/Site Development. We foster a collaborative environment where driven team members can build lasting friendships, support one another, and guide our clients in shaping their futures. With offices across the Southeast, including six in Alabama, two in North Carolina, and one in Tennessee, we offer an exceptional opportunity for personal and professional growth. If you're ready to make a difference and advance your career, join us at Three Notch Group and be part of a team that truly values your contributions! The mission of the Construction Quality Technician is to ensure the quality of a constructed project, monitor contractor progress, and perform certain quality control and contract administration functions. The applicant will be expected to: Read and understand construction plans and specifications. Monitor and document contractor progress and conformance to plans and specifications. Perform field testing of construction materials such as soil, concrete, steel, and asphalt. Prepare complete, written reports including daily summaries and test results in a timely manner. Communicate with the project team regarding project progress, test results, non-compliant items, quantities, and other findings. Requirements: High school diploma/GED A valid driver's license 1-2 years of construction experience preferred Locations: Asheville, NC Three Notch Group. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by applicable law.

Basic Function: Final inspection of finished products in accordance with policies, procedures, work instructions, customer requirements, military/government and industry standards. Significant Responsibilities: Performs specific job responsibilities: Inspects products for length, breaks, and attenuation using OTDR equipment; test based on priority Ensures the product has been manufactured to requirements; identifies defects and problems resulting from the production process Evaluate data to validate compliance or identify deviations from existing standards Ensure all paperwork is accurate and complete Complete detailed documentation and reports of all Inspection activities in accordance with OCC policy and Customer specified requirements; including Defective Material / Non-conforming Material notices; Coordinate disposition of affected material Support implementation of data collection projects thru the online Syspro system Promotes OCC's service excellence and quality. Provides excellent service to customers; builds strong relationships and team cohesiveness; focuses on quality and positive solutions; communicates respectfully; demonstrates compassion and understanding in response to customer requests/needs. Champions OCC's mission, vision, and values (as detailed in our 15 Essential Points of Success); complies with policies and procedures, ethical standards, and Code of Conduct Job Scope: Organizational Responsibility - None Communication - Frequent communication via voice, email, and written reports Confidentiality - Has access to customer-furnished data Financial Responsibility - None Judgment - Errors could result in defective products being allowed to ship to customers Compliance - Responsible only for determining compliance with OCC-defined requirements Travel - None required Minimum Qualifications Required: Education: High school diploma or GED Experience: 3 or more years in a Quality Assurance/Control Inspection process preferred Licensure, Certification and/or Registration: none Other Minimum Qualifications: Effective interpersonal, communication and teamwork skills Essential Skills, Abilities & Knowledge: Ability to read and comprehend basic instructions Demonstrated knowledge of ISO 9001 requirements Demonstrated knowledge of MIL-STD requirements Demonstrated knowledge of Quality Assurance/Control practices Demonstrated ability to use and understand the use of calipers, micrometers, and optical test equipment Must have the ability to solve problems with minimal direction Must demonstrate the ability to be objective in nature Must demonstrate attention to detail Must have good inspection skills with minimal errors as established by the company Must be able to inspect a high quantity and quality of work Must be able to interact with manufacturing, sales personnel, and management Must demonstrate the willingness to learn new skills, show an interest in growing the company, and present a professional positive attitude at all times Working Conditions: Manufacturing area environment. Will regularly be lifting or moving cable reels up to 50 Lbs. This is a quality position that requires sight sufficient for computer use and significant detail for inspection. This position also requires an individual with hearing sufficient for telephone contact with employees and management as well as relaying messages accurately. There are significant computer input/data entry duties that require sufficient manual dexterity for handling small fiber optic products, tools, and instruments. Reasonable accommodation may be made to enable individuals with a disability to perform the essential functions. Note: This job description is only meant to be a representative summary of the major responsibilities and accountabilities performed by incumbents of this job. The incumbents may be requested to perform job-related tasks other than those stated in this description.

Basic Function: Final inspection of finished products in accordance with policies, procedures, work instructions, customer requirements, military/government and industry standards. Significant Responsibilities: Performs specific job responsibilities: * Inspects products for length, breaks, and attenuation using OTDR equipment; test based on priority * Ensures the product has been manufactured to requirements; identifies defects and problems resulting from the production process * Evaluate data to validate compliance or identify deviations from existing standards * Ensure all paperwork is accurate and complete * Complete detailed documentation and reports of all Inspection activities in accordance with OCC policy and Customer specified requirements; including Defective Material / Non-conforming Material notices; Coordinate disposition of affected material * Support implementation of data collection projects thru the online Syspro system Promotes OCC's service excellence and quality. Provides excellent service to customers; builds strong relationships and team cohesiveness; focuses on quality and positive solutions; communicates respectfully; demonstrates compassion and understanding in response to customer requests/needs. Champions OCC's mission, vision, and values (as detailed in our 15 Essential Points of Success); complies with policies and procedures, ethical standards, and Code of Conduct Job Scope: * Organizational Responsibility - None * Communication - Frequent communication via voice, email, and written reports * Confidentiality - Has access to customer-furnished data * Financial Responsibility - None * Judgment - Errors could result in defective products being allowed to ship to customers * Compliance - Responsible only for determining compliance with OCC-defined requirements * Travel - None required Minimum Qualifications Required: Education: High school diploma or GED Experience: 3 or more years in a Quality Assurance/Control Inspection process preferred Licensure, Certification and/or Registration: none Other Minimum Qualifications: Effective interpersonal, communication and teamwork skills Essential Skills, Abilities & Knowledge: * Ability to read and comprehend basic instructions * Demonstrated knowledge of ISO 9001 requirements * Demonstrated knowledge of MIL-STD requirements * Demonstrated knowledge of Quality Assurance/Control practices * Demonstrated ability to use and understand the use of calipers, micrometers, and optical test equipment * Must have the ability to solve problems with minimal direction * Must demonstrate the ability to be objective in nature * Must demonstrate attention to detail * Must have good inspection skills with minimal errors as established by the company * Must be able to inspect a high quantity and quality of work * Must be able to interact with manufacturing, sales personnel, and management * Must demonstrate the willingness to learn new skills, show an interest in growing the company, and present a professional positive attitude at all times Working Conditions: Manufacturing area environment. Will regularly be lifting or moving cable reels up to 50 Lbs. This is a quality position that requires sight sufficient for computer use and significant detail for inspection. This position also requires an individual with hearing sufficient for telephone contact with employees and management as well as relaying messages accurately. There are significant computer input/data entry duties that require sufficient manual dexterity for handling small fiber optic products, tools, and instruments. Reasonable accommodation may be made to enable individuals with a disability to perform the essential functions. Note: This job description is only meant to be a representative summary of the major responsibilities and accountabilities performed by incumbents of this job. The incumbents may be requested to perform job-related tasks other than those stated in this description. The regular schedule for this position is 8:00 a.m. - 5:00 p.m. Monday - Friday with some schedule flexibility required; overtime is also available. 40 hours/week

Basic Function: Final inspection of finished products in accordance with policies, procedures, work instructions, customer requirements, military/government and industry standards. Significant Responsibilities: Performs specific job responsibilities: Inspects products for length, breaks, and attenuation using OTDR equipment; test based on priority Ensures the product has been manufactured to requirements; identifies defects and problems resulting from the production process Evaluate data to validate compliance or identify deviations from existing standards Ensure all paperwork is accurate and complete Complete detailed documentation and reports of all Inspection activities in accordance with OCC policy and Customer specified requirements; including Defective Material / Non-conforming Material notices; Coordinate disposition of affected material Support implementation of data collection projects thru the online Syspro system Promotes OCC's service excellence and quality. Provides excellent service to customers; builds strong relationships and team cohesiveness; focuses on quality and positive solutions; communicates respectfully; demonstrates compassion and understanding in response to customer requests/needs. Champions OCC's mission, vision, and values (as detailed in our 15 Essential Points of Success ); complies with policies and procedures, ethical standards, and Code of Conduct Job Scope: Organizational Responsibility - None Communication - Frequent communication via voice, email, and written reports Confidentiality - Has access to customer-furnished data Financial Responsibility - None Judgment - Errors could result in defective products being allowed to ship to customers Compliance - Responsible only for determining compliance with OCC-defined requirements Travel - None required Minimum Qualifications Required: Education: High school diploma or GED Experience: 3 or more years in a Quality Assurance/Control Inspection process preferred Licensure, Certification and/or Registration: none Other Minimum Qualifications: Effective interpersonal, communication and teamwork skills Essential Skills, Abilities & Knowledge: Ability to read and comprehend basic instructions Demonstrated knowledge of ISO 9001 requirements Demonstrated knowledge of MIL-STD requirements Demonstrated knowledge of Quality Assurance/Control practices Demonstrated ability to use and understand the use of calipers, micrometers, and optical test equipment Must have the ability to solve problems with minimal direction Must demonstrate the ability to be objective in nature Must demonstrate attention to detail Must have good inspection skills with minimal errors as established by the company Must be able to inspect a high quantity and quality of work Must be able to interact with manufacturing, sales personnel, and management Must demonstrate the willingness to learn new skills, show an interest in growing the company, and present a professional positive attitude at all times Working Conditions: Manufacturing area environment. Will regularly be lifting or moving cable reels up to 50 Lbs. This is a quality position that requires sight sufficient for computer use and significant detail for inspection. This position also requires an individual with hearing sufficient for telephone contact with employees and management as well as relaying messages accurately. There are significant computer input/data entry duties that require sufficient manual dexterity for handling small fiber optic products, tools, and instruments. Reasonable accommodation may be made to enable individuals with a disability to perform the essential functions. Note: This job description is only meant to be a representative summary of the major responsibilities and accountabilities performed by incumbents of this job. The incumbents may be requested to perform job-related tasks other than those stated in this description. The regular schedule for this position is 8:00 a.m. - 5:00 p.m. Monday - Friday with some schedule flexibility required; overtime is also available. 40 hours / week

Quality InspectorTaylor, MI Company is a fabrication facility Shift: 1st shift: 7am to 3:30pm Monday-Friday w/ some OT on Saturday Must train on the 2nd shift 3p to 11:30p Pay: Up to $20/hr based on experience Essential Job Duties:Inspect parts for quality Inspected parts must meet QC and customer specifications. Must know how to read calipers and micrometers Reading blueprints is a plus Will have a quantity of parts expected to be inspected on each shift Other duties assigned by manager Safety Requirements Safety glasses Hearing protection if needed No loose fitting clothes Jewerly is not permitted Lots of opportunity for growth within the company. Contract to hire position

**Discover a more connected career** At Lambert's Cable, as a Quality Control Field Technician, you'll ensure that construction or installation work meets specified standards by performing inspections, conducting tests, and monitoring compliance throughout projects. You'll address issues, document findings, and collaborate with teams to implement improvements and maintain high-quality outcomes **Connecting you to great benefits** + Weekly Paychecks + Paid Time Off, Parental Leave, and Holidays + Insurance (including medical, prescription drug, dental, vision, disability, life insurance) + 401(k) w/ Company Match + Stock Purchase Plan + Education Reimbursement + Legal Insurance + Discounts on gym memberships, pet insurance, and much more! **What you'll do** + Conduct quality inspections during the installation process to ensure work meets plans and specifications + Perform final inspections as requested by customers to ensure compliance with construction standards + Identify issues and report them to relevant team members for resolution + Record and follow up on non-compliance issues until they are resolved + Ensure all required testing is completed as specified and document the results + Follow installation milestones and support project activities as directed by management + Work overtime, travel, and handle on-call or after-hours responsibilities as needed, and perform duties in all weather conditions + Other duties as assigned **What you'll need** + To be 18 years of age or older + Authorization to work in the United States for this company + Valid State driver's license (cannot be Provisional), including an acceptable driving record + One year of relevant work experience Additional qualifications + Quality control experience preferred + Associates Degree in an industry related field or equivalent work experience + Knowledge and understanding of the telecommunication construction industry standard practices + Knowledge of Customer Installation Standards and Documentation **Physical abilities & exposures** + **Routinely** : work alone in remote locations, operate vehicle, squeeze, bend, stoop, stand, walking, climb stairs, use keyboard and mouse + **Occasionally** : work at heights, use ladder, life greater than 55 pounds **Why grow your career with us** Your career here is more than just a job - it's your pathway to opportunity. Our hands-on training, supportive environment, and responsive leadership connect you to work with purpose. Our commitment to you extends beyond professional development to a safety-first culture that ensures you can do what you do best, with peace of mind. **Building stronger solutions together** Our company is an equal-opportunity employer - we are committed to providing a work environment where everyone can thrive, grow, and feel connected. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Quality Inspector - Metal Parts (Tier 1 Automotive Stamping) Auburn Hills: 6:00am-4:30pm - $17/hr Job SummaryThe Quality Inspector is responsible for inspecting stamped metal automotive parts to ensure they meet customer specifications and company quality standards. This role supports production by identifying defects, documenting findings, and maintaining a safe and organized work environment. Key Responsibilities Perform visual and dimensional inspections of stamped metal parts Use gauges, calipers, check fixtures, and other measurement tools Follow quality standards, work instructions, and inspection criteria Record inspection results and complete required documentation Communicate defects or nonconformities to production and leadership Support containment, rework, and sorting activities as needed Maintain a clean, safe work area and follow all safety procedures Qualifications Previous manufacturing or quality experience preferred Ability to read and understand basic work instructions Comfortable standing for long periods and lifting up to 25 lbs Long term contract to hire

Job Description The QualityInspectorensuresthat allfinishedproductspassall electrical and final inspections andconformtoall therequirements. Duties/Responsibilities: Perform final inspection and complete all data entry with final inspection. Assist in-process inspections for all parts manufactured in FAB, Powder Coat, and Assembly, including Prototype inspection and FAIR reporting as assigned by the Quality Manager. Perform in-process inspections according to work instructions andthe Quality Manager's instructions. Verify shop order packets, including prints and Bill of Materials,as required during inspections. Perform data entry of daily inspections as required. Maintain accurate and legible records and file in an organized manner. Assist production in non-conforming product analysis and resolution. Participate in Internal Audits at theassigned facilityas required. Perform other duties as assigned. Required Skills/Abilities: Language Skills: Read, analyze, and interpret general business documents, technical procedures, governmental regulations, standards, procedures, and manuals. Effectively present information and respond to questions from managers, customers, visitors, andcompany employees. Mathematical Skills: Ability to apply concepts of fractions, addition, subtraction, division,and decimals in all units of measure. Reasoning Ability: Define problems, collect data and facts, draw valid conclusions, and recommend solutions.Ability to interpret technical instructions and diagrams. Education and Experience: High school diploma or GED 1-3 years ofrelated experience. Minimumof7yearsof proven quality inspectorexperiencewill be considered in lieu of a degree. Knowledgeof inspection, measuring, and testingequipment. Knowledge and experience using mechanical and electrical measuring equipment. Knowledge of Microsoft Office (Word, Excel, and PowerPoint). Physical Requirements: The physical demands described are representative of those that an employee must successfully perform. Reasonable accommodation may be made to enable individuals with disabilities to perform essential functions. Employees are regularly required to stand, walk, use their hands to touch, handle, and feel objects, and use tools or controls. The employee is occasionally required to sit, reach with hands and arms, stoop, kneel,and,crouch. The employee must regularly lift and/or move up to35pounds, and occasionally lift and/or move up to35pounds.Charles Industries weight rule: 35 lbs. and under can be lifted alone. 35 - 50 lbs. can be lifted by one person if they feel comfortable doing so. 50 lbs. or more requires the employee to get assistance or use a lifting device. (i.e. pallet jack, forklift, scissor table, buddy system). Vision abilities required are close, peripheral, and depth. Must have the ability to recognize color. Work Environment: Thework environment characteristics described are representative of those an employee encounters while performing the essential job functions. Employees regularly work near moving, vibrating mechanical equipment, occasionally exposed to fumes or airborne particles. Exposed to minimal risk of electrical shock. The noise level in the work environmentis moderate to loud.

The Quality Inspector ensures that all finished products pass all electrical and final inspections and conform to all the requirements. Duties/Responsibilities: Perform final inspection and complete all data entry with final inspection. Assist in-process inspections for all parts manufactured in FAB, Powder Coat, and Assembly, including Prototype inspection and FAIR reporting as assigned by the Quality Manager. Perform in-process inspections according to work instructions and the Quality Manager's instructions. Verify shop order packets, including prints and Bill of Materials, as required during inspections. Perform data entry of daily inspections as required. Maintain accurate and legible records and file in an organized manner. Assist production in non-conforming product analysis and resolution. Participate in Internal Audits at the assigned facility as required. Perform other duties as assigned. Required Skills/Abilities: Language Skills: Read, analyze, and interpret general business documents, technical procedures, governmental regulations, standards, procedures, and manuals. Effectively present information and respond to questions from managers, customers, visitors, and company employees. Mathematical Skills: Ability to apply concepts of fractions, addition, subtraction, division, and decimals in all units of measure. Reasoning Ability: Define problems, collect data and facts, draw valid conclusions, and recommend solutions. Ability to interpret technical instructions and diagrams. Education and Experience: High school diploma or GED 1-3 years of related experience. Minimum of 7 years of proven quality inspector experience will be considered in lieu of a degree. Knowledge of inspection, measuring, and testing equipment. Knowledge and experience using mechanical and electrical measuring equipment. Knowledge of Microsoft Office (Word, Excel, and PowerPoint). Physical Requirements: The physical demands described are representative of those that an employee must successfully perform. Reasonable accommodation may be made to enable individuals with disabilities to perform essential functions. Employees are regularly required to stand, walk, use their hands to touch, handle, and feel objects, and use tools or controls. The employee is occasionally required to sit, reach with hands and arms, stoop, kneel, and, crouch. The employee must regularly lift and/or move up to 35 pounds, and occasionally lift and/or move up to 35 pounds. Charles Industries weight rule: 35 lbs. and under can be lifted alone. 35 - 50 lbs. can be lifted by one person if they feel comfortable doing so. 50 lbs. or more requires the employee to get assistance or use a lifting device. (i.e. pallet jack, forklift, scissor table, buddy system). Vision abilities required are close, peripheral, and depth. Must have the ability to recognize color. Work Environment: The work environment characteristics described are representative of those an employee encounters while performing the essential job functions. Employees regularly work near moving, vibrating mechanical equipment, occasionally exposed to fumes or airborne particles. Exposed to minimal risk of electrical shock. The noise level in the work environment is moderate to loud.