Tuffy Tire & Auto Service Centers jobs in Charlotte, NC - 29064 jobs

Company - Tyson Power Only This fleet‘s drivers primarily operate in Iowa, Nebraska, Minnesota, Missouri, Wisconsin, Kansas, Indiana, Ohio, Michigan, and Illinois (including Chicago). Potential runs to the East Coast and Florida are possible. Company Drivers enjoy the following: $1,350 Availability Incentive Pay Availability Incentive Pay is subject to restrictions and inclusive of any per diem pay. Must be available for six days of dispatch Annual Increase in Availability Incentive Pay 1 Year Tenure - $1,375 2 Years Tenure - $1,400 3 Years Tenure - $1,450 4 Years Tenure - $1,500 5 Years Tenure - $1,550 Weekly to Biweekly Home Time (Weekly only available in select locations) Monthly Safety & Performance Incentive Bonus Benefit Package Vacation Pay (after 1 year) Pet & Passenger Policy Free SiriusXM & 24‘ SmartTV Monthly Safety & Performance Incentive Bonus The incremental bonus is $0.05 to $0.15/mile above 3,999 during the four-week bonus period. The operator must qualify for all four weeks of the bonus period with no accidents, claims, CSA points, citations, or service failures. Miles 0 - 3,999 = $0.00 Miles 4,000 - 5,999 = $0.05/mile Miles 6,000 - 7,999 = $0.10/mile Miles 8,000+ = $0.15/mile Example The operator has 4 safe weeks during the bonus period and runs 8,650 dispatched miles during this time. The operator will earn: No extra pay for miles 0 - 3,999 $0.05/mile for miles 4,000 - 5,999 = $99.95 (1,999 miles) $0.10/mile for miles 6,000 - 7,999 = $199.90 (1,999 miles) $0.15/mile for miles over 8,000 = $97.50 (650 miles) Total monthly bonus payout: $397.50 Pay Information Per Diem Reimbursement: $0.15 CPM, for an average of $59 per day of non-taxable income. Included in the rate of pay below. Base Pay: Total listed on the chart below less Per Diem Equipment Newer Model Equipment Large capacity refrigerator 24‘ SmartTV Free SiriusXM Satellite Radio Heated & cooled seats Automatic high beams Blind spot technology Automatic windshield wipers Lane assist sensors Details Passenger & Pet Policy Direct Deposit E-Logs Pre-Planned Dispatch Trucks Equipped with Best Pass & PrePass Trucks Governed at 70 MPH Hirschbach App Scan paperwork, get payroll information, receive mobile communication messages, and much more from your phone. So Much More Medical, Dental, & Vision Free $10,000 Life Insurance Policy Vacation Pay after 1 year 401K with company match Critical Illness Options Driver Referral Program Driver Influencer Program - Earn money by posting on social media Annual Driver Award Ceremony - The Best of the Best

Company - Tyson Power Only This fleet‘s drivers primarily operate in Iowa, Nebraska, Minnesota, Missouri, Wisconsin, Kansas, Indiana, Ohio, Michigan, and Illinois (including Chicago). Potential runs to the East Coast and Florida are possible. Company Drivers enjoy the following: $1,350 Availability Incentive Pay Availability Incentive Pay is subject to restrictions and inclusive of any per diem pay. Must be available for six days of dispatch Annual Increase in Availability Incentive Pay 1 Year Tenure - $1,375 2 Years Tenure - $1,400 3 Years Tenure - $1,450 4 Years Tenure - $1,500 5 Years Tenure - $1,550 Weekly to Biweekly Home Time (Weekly only available in select locations) Monthly Safety & Performance Incentive Bonus Benefit Package Vacation Pay (after 1 year) Pet & Passenger Policy Free SiriusXM & 24‘ SmartTV Monthly Safety & Performance Incentive Bonus The incremental bonus is $0.05 to $0.15/mile above 3,999 during the four-week bonus period. The operator must qualify for all four weeks of the bonus period with no accidents, claims, CSA points, citations, or service failures. Miles 0 - 3,999 = $0.00 Miles 4,000 - 5,999 = $0.05/mile Miles 6,000 - 7,999 = $0.10/mile Miles 8,000+ = $0.15/mile Example The operator has 4 safe weeks during the bonus period and runs 8,650 dispatched miles during this time. The operator will earn: No extra pay for miles 0 - 3,999 $0.05/mile for miles 4,000 - 5,999 = $99.95 (1,999 miles) $0.10/mile for miles 6,000 - 7,999 = $199.90 (1,999 miles) $0.15/mile for miles over 8,000 = $97.50 (650 miles) Total monthly bonus payout: $397.50 Pay Information Per Diem Reimbursement: $0.15 CPM, for an average of $59 per day of non-taxable income. Included in the rate of pay below. Base Pay: Total listed on the chart below less Per Diem Equipment Newer Model Equipment Large capacity refrigerator 24‘ SmartTV Free SiriusXM Satellite Radio Heated & cooled seats Automatic high beams Blind spot technology Automatic windshield wipers Lane assist sensors Details Passenger & Pet Policy Direct Deposit E-Logs Pre-Planned Dispatch Trucks Equipped with Best Pass & PrePass Trucks Governed at 70 MPH Hirschbach App Scan paperwork, get payroll information, receive mobile communication messages, and much more from your phone. So Much More Medical, Dental, & Vision Free $10,000 Life Insurance Policy Vacation Pay after 1 year 401K with company match Critical Illness Options Driver Referral Program Driver Influencer Program - Earn money by posting on social media Annual Driver Award Ceremony - The Best of the Best

The Toyoda Gosei Group is a leading global manufacturer of rubber and plastic automotive components, safety systems and LEDs. Globally Headquartered in Japan with a network of 67 group companies in 17 countries and regions, the Group brings its extensive range of products to customers all over the world. Toyoda Gosei North America (headquartered in Troy, MI) has an opening for a Buyer in the Purchasing department. The Buyer functions with a high degree of autonomy, and is responsible for responsible for providing professional level production related procurement for Toyoda Gosei (TG) North America Corporation (TGNA) and TGNA Manufacturing Companies (AMCs). Essential Duties and Responsibilities Drive cost savings initiatives such as annual price review, VA/VE, and others as assigned Lead Annual Price Review negotiations with existing suppliers for cost reductions Support VA/VE activities with suppliers and TG cross functional groups to drive cost savings Negotiate price increases and tariffs with suppliers Implement sourcing & new program launch activities with new/existing materials Participate in new program launch activities with manufacturing plants, cross functional departments, and suppliers Issue, collect, negotiate and analyze RFQ's and cost breakdowns with new and existing suppliers Analyze and forecast Petrochemical/Metals market data for price negotiations and budget preparation Maintain purchase order data and ensure approvals for upcoming purchases Contribute to commodity strategy development Communicate with TG Japan (HQ) regarding global material strategies Participate in Purchasing's annual cost saving target setting and strategy development Partner with TG cross functional groups and locations in new material development, commercial agreement strategies, commodity sourcing strategies, and cost reduction initiatives Function in a highly collaborative environment where flexibility and teamwork is critical to success Drive optimization by being actively engaged in continuous improvement efforts Manage and resolve supplier issues as needed Travel to TG manufacturing plants and supplier as needed Drive optimization by being actively engaged in continuous improvement efforts (kaizen) This role requires the completion of other duties as assigned Required Education, Experience, and Skills Certifications and Education Bachelor's degree in Engineering, Supply Chain Management, Business or related field is required, or equivalent years of relevant experience is required Experience 1 to 4 years of experience in Purchasing function is preferred Strong desire to learn all aspects of Purchasing and a willingness to expand to other commodities is preferred Exposure to the development of short and long-term global purchasing strategy is preferred Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to sit. The employee is occasionally required to stand, walk, and reach with hands and arms. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision. Technology Competencies Proficiency using Microsoft Office Suites is required Work Environment Office Environment Additional Competencies Ability to consistently meet deadlines is required Effective verbal, non-verbal, negotiation and written communication skills are required Ability to sustain a high degree of professionalism in interacting with internal and external customers is required Effective attention to detail, problem solving, analytical and organizational skills are required Benefits (subject to eligibility): Hybrid Work Style (if eligible) Insurance (Health, Dental, Vision, Prescription Drug Program) Company Paid STD, LTD, Life, and AD&D Generous Employer Contribution to HSA Short and Long Term Disability 401K Company Match Paid Time Off/Holidays Free Employee Assistance Plan (EAP) Reimbursement Programs (Cellphone, Tuition, Vehicle, etc.) Multiple Free Wellness Programs Offered

A luxury automotive company in Miami is seeking a Vice President of Finance to drive strategic and operational finance across the organization. The ideal candidate will have over 10 years of finance experience, focusing on FP&A, and possess strong leadership skills. Responsibilities include overseeing budgeting and forecasting, evaluating M&A opportunities, and partnering with business leaders on strategic initiatives. This is a full-time, in-office role offering competitive compensation and benefits. #J-18808-Ljbffr

The Order Operations Supervisor leads a small team (2-3) responsible for end-to-end order processing in CRM/SAP from PO receipt through invoicing. The role drives accuracy, timeliness, and a customer-centric experience; owns EDI execution; resolves escalations; and partners closely with Sales, Supply Planning, IT, and After-sales. This leader coaches and develops the team, standardizes best practices, and champions continuous improvement to optimize on-time, in-full delivery and operational efficiency. General Job Duties and Responsibilities: Lead day-to-day operations for order entry, processing, and management within CRM/SAP; own the workflow from PO receipt to customer invoicing and resolve AR issues. Coach and mentor a 2-3 person team to improve accuracy, speed, and service quality; manage workload coverage and backups. Serve as escalation point for complex customer/order issues; ensure professional, timely resolution. Oversee EDI transactions; troubleshoot and resolve document errors for assigned accounts. Partner with Sales, Supply Planning, and Logistics to clear order blocks, align ship plans, and ensure OTIF delivery. Maintain data integrity across ERP/portals; ensure all transactions are timely and compliant Leverage dashboards/reports to track orders and proactively address exceptions. Support new product launches or seasonal peaks with scalable vendor plans Track and maintain accurate inventory levels, monitor weeks-on-hand, and minimize stockouts and aged products. Foster a customer-first culture; ensure prompt, professional responses to inquiries and strong relationship management. Identify and lead process improvement initiatives to eliminate non-value-added work; support best-practice adoption across the function. Participate in continuous improvement projects and cross-functional initiatives that enhance order-to-cash performance. Other duties as assigned. Supervisory Responsibilities: This job has supervisory responsibilities. Supervise and manage 2-3 employees of the operations team Supervise the performance of each service business lines/teams based on goals and the effectiveness of service improvement projects. Responsibilities include setting service goals, outputting service reports, interviewing, recruiting, and training employees, handling complaints, and resolving issues. Qualifications: Bachelor's degree in Business, Supply Chain, or related field preferred, or equivalent work experience in Supply Chain/Order Management with consumer goods . Minimum 7 years of relevant Supply Chain/Order Management (consumer goods preferred), with 1-2 years leading or supervising a team experience, preferably in a eMobility, consumer electronics, or power sports . Strong hands-on experience with SAP (or equivalent ERP), EDI, and vendor/customer portals. Proficient in navigating complex systems for tracking, reporting, and troubleshooting. Experience in contributing to cross-functional team meetings with internal and external stakeholders. Excellent organization, prioritization, attention to detail, and follow-through. Strong communication, problem-solving, and interpersonal skills. Proficiency in Microsoft Office (Excel, Word, PowerPoint). Bilingual in English and Mandarin is highly preferred. Physical Demands: This role is performed in a professional office or hybrid environment and requires prolonged periods of computer work, frequent participation in virtual meetings, and regular interaction across teams and partners. Occasional moving of files, product samples, or shipping materials up to 50 pounds may be required. Limited travel to warehouses, 3PLs, or customer sites may occur based on business needs and project work. Specific vision abilities required for this job include close vision, color vision, and the ability to adjust focus. EEO Statement: Segway Inc. is committed to providing Equal Opportunity in Employment to all applicants and employees regardless of race, color, religion, gender, age, national origin, military status, veteran status, handicap, physical or mental disability, sexual orientation, gender identity, genetic information, or any other characteristic protected by law.

Answer Phone Calls, Emails and Drive In's to address any customer concern with the highest level of response and attention Return missed phone calls, emails, from customers Determine if technical solution can be resolved over the phone; escalate immediately to Shop Foreman / Service Manager to provide immediate attention Accurately record issues and data into Dealer Management System. Attention to detail critical Conduct Transactions w/ system; walk customer through correction and provide summary Communicate estimated completion time, regular updates and follow through on each customer vehicle Coordinate the detail of every vehicle prior to delivery Coordinate the delivery time or pick up with each customer Follow up with Customer on services provided; ensure they are satisfied with the work performed Performs other duties as requested Requirements Knowledge of methods, techniques, parts, tools and materials used in the maintenance and repair of vehicles Experience in operational use and maintenance of a wide variety of hand power tools, shop tools, and automotive and electrical test equipment Understanding of basic automotive techniques related to repair and servicing of automobiles Ability to follow oral and written instructions with attention to detail Willingness to learn new and innovative automotive technologies Ability to establish and maintain cooperative working relationships with those contacted in the course of work to include the public Perform detailed daily record keeping and reporting Effectively handle multiple priorities, organize workload, and meet deadlines Work in a team-based environment and achieve common goal. Dealer Management System(s), Outlook, and MS Office QUALIFICATIONS Must have and maintain a valid driver's license and an acceptable and safe driving record. Must be 21 years old or older. Must be able to pass a drug test screening. Must be able to pass a background screening check. EMPLOYMENT BENEFITS INCLUDE: Paid Vacation and Holidays 401(K) Vision Insurance Dental Insurance Medical Insurance BERT OGDEN IS AN EQUAL OPPORTUNITY EMPLOYER

The Replenishment Manger is responsible for day-to-day management of all aspects of our seasonal and year-round businesses. In addition, this individual will drive key operational strategies to align with the customer on inventory expectations and optimal replenishment settings that achieve high forecast accuracies, high in-stock metrics, and best in class service levels. Responsibilities: Manage replenishment team to ensure business goals of maximizing fill-rate and ensuring zero liabilities are met weekly Ad Hoc analysis supporting Director of Replenishment, VP of Planning & Sales, and Executive Team Driver of strategic projects, applying creativity and project management skills through ideation, development, piloting, and test & learn scenarios Develop joint execution plans that coordinate actions with key stakeholders and customers Replenishment & Supply Chain Teams Deliver exceptional weekly reporting that highlights opportunities and risks Collaborate with planning team on in-stocks, order level, and/or forecasting opportunities to drive sales Champion innovative ideas and solutions for continuous improvement within the team and the customer Qualifications: Bachelor's degree or equivalent relevant work experience Minimum of 5 years of experience in replenishment, supply chain, sales forecasting or inventory management Experience with Walmart is required Strong communication skills both oral and written High Proficiency in Excel as well as overall analytical background Ability to work in a collaborative, team-based environment that enables & develops relationships across functional stakeholders High level of energy and sense of urgency, strategic thinker, self-starter, strong and effective multi-tasker

Austin, TX - Full-Time Cooper & Company is a high-end residential landscape architecture + design-build firm based in Austin. We design and build complex custom landscapes, outdoor living spaces, pools, sitework, drainage systems, and full estate environments. We are looking for an Assistant Landscape Superintendent - someone who thrives outside, enjoys construction, and can keep jobs moving with quality and accountability. This is a field-first role. You will be on job sites daily, supporting production, quality control, scheduling, and communication between subs, clients, and our project team. What You'll Do Maintain a daily presence on active job sites Assist with field coordination, sequencing, and scheduling Hold subcontractors accountable to quality and timelines Verify work completed each day and report progress Walk sites for punch items, corrections, and readiness Ensure proper installation of landscape, hardscape, drainage, and irrigation Manage site access, deliveries, staging, and safety Communicate clearly with clients, subs, and our internal team Support the Superintendent with field documentation and updates Capture jobsite photos and maintain daily logs Help keep projects organized and moving forward What We're Looking For 1-4+ years of experience in construction, landscaping, or outdoor work Comfortable directing subs and communicating confidently Strong awareness of quality standards and attention to detail Able to read or willing to learn plans, elevations, and site layouts Not afraid to work outside year-round Assertive, reliable, and process-driven Good judgment on job sites and able to problem-solve in real time Professional and respectful when speaking with homeowners A genuine interest in landscape construction and high-end residential work If you've worked in landscape install, stonework, irrigation, carpentry, sitework, or any related field, this role is a strong fit.

Dana is a global leader in the supply of highly engineered driveline, sealing, and thermal-management technologies that improve the efficiency and performance of vehicles with both conventional and alternative-energy powertrains. Serving three primary markets - passenger vehicle, commercial truck, and off-highway equipment - Dana provides the world's original-equipment manufacturers and the aftermarket with local product and service support through a network of nearly 100 engineering, manufacturing, and distribution facilities. Up to $36.25 per hour! Manufacturing Electrician opportunities available at an established company, Dana Inc. - Fort Wayne, IN. The successful candidates will enjoy working with their hands in a team environment. Do you thrive in a challenging fast paced environment? Dana Inc is the place for you. Job Duties Electricians will program and/or alter machine control logic programs for CNC machines as required by the plant electrical engineer, or the electrical department Supervisor. The electrician will also program or alter programs for robots and P.C. controlled machines as required by the plant electrical engineer or electrical Supervisor. The machine builders initial programming logic and programming the machine builder deems proprietary will be the machine builder's responsibility. Working knowledge of PLC troubleshooting, Robot recovery and repair. Strong problem-solving skills. Lays out, assembles, installs, and tests electrical fixtures, apparatus, control equipment, and wiring used in the alarm, radio, communications, light and power system of buildings or other construction projects, machines, or other mechanical equipment. Plans proposed installation from blueprints, sketches, or specifications. Secures panel boards, switch boxes, pull boxes and other concealed or recessed equipment to the frame of the structure prior to the erection of walls, Measures, cuts, threads, bends, assembles, and installs conduit which connects the various outlets, panels and boxes or machines, using tools such as hacksaw, pipe benders, and threading tools, Installs and connects equipment to wiring system; tests circuits for continuity and proper connections, using a battery and buzzer, or light bulb, installs buss duct, main power lines and systems, circuit breakers, transformers, and all other electrical equipment included in power systems. Keeps electrical equipment such as wiring, motors, switches, switch boards, panel boards, and electrical mechanisms in good repair and operating condition. Follow all safety policy and procedures. Close all work orders assigned to in E-maint each day accurately and timely. Perform other duties incidental to the job, as set forth herein. Physical Requirements Ability to occasionally sit, crawl, reach, twist, push, pull, grip, pinch, crouch/squat, forward bend, forward sit, forward stand, and climb stairs/ladders. Ability to frequently stand and walk. Ability to exert light lifting and carrying under 25 lbs up to 33% of the time. Ability to exert moderate lifting and carrying of 25-49lbs up to 33% of the time. Ability to exert heavy lifting and carrying of 50+lbs up to 33% of the time. Ability to occasionally perform repetitive motion activities such as hand/wrist, forearm/elbow, and shoulder. Desired Skills & Expertise Valid Journeyperson card or have eight (8) years of practical trade-related experience and can prove same with the properly notarized documents or work record. Proven Experience with new equipment installation, hydraulics, knowledge of industrial power distribution. Furnace thermal couple calibration, furnace inspection and repair. Knowledge of 480, 110, 220, and 3 phase electrical systems, able to read electrical schematics. Preventative maintenance experience and E Maintenance, Rockwell Logix platform, Fanuc robotics and CNC. Proven organization and communication skills, including ability to effectively present information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Join our team of 40,000 problem solvers who are fostering a culture of innovation by leveraging the diverse perspectives of our global team. We believe in facing challenges head-on by finding opportunity and uncovering possibility, where roadblocks and barriers become targets instead of obstacles. We are One Dana with limitless opportunity. Our Values Value Others Inspire Innovation Grow Responsibly Win Together

Employment Type: Full Time Salary Range: $20.00 - $45.00 Hourly To be a team member of the Driven by Dobbs family, you must be dedicated to supporting the company's mission, vision, and values. Our Mission To be the leader in the automotive tire and service aftermarket industry in every market where we operate by providing premier service to our guests. Position Title Master Technician Position Overview Driven by Dobbs brings together Dobbs Tire and Auto Centers and Conrad's Tire Express & Total Car Care. Founded in 1976 and 1969 respectively, our family of brands has grown into a rapidly expanding, multi-market automotive service organization. By 2026, we will operate across eight states, with continued growth ahead. Across all locations, we provide a full selection of quality tire brands and comprehensive automotive services, ranging from routine maintenance to advanced diagnostics and engine repair. Our investment in training, development, safety, and team wellbeing empowers our people to deliver exceptional service every day. Rooted in a culture that extends beyond the shop, we proudly support local organizations and charities in the communities where we live and work. We are seeking a Master Technician to serve as a consultant for diagnostic work, vehicle repairs, and service procedures. This role provides technical expertise, leadership, and guidance to the service department, ensuring high-quality work and efficient operations. The ideal candidate demonstrates: Drive and reliability A desire to learn Speed of execution Strong attention to detail All contributing to the exceptional service our customers expect. Roles and Responsibilities Diagnose and repair vehicles accurately, efficiently, and to a high standard. Perform advanced removal, replacement, and diagnostic work on systems including: Emission control systems Throttle body injection Computerized electrical and ignition systems Anti-lock brakes Cruise control Drivability concerns Automatic transmissions A/C systems Four-wheel drive components Train and mentor service department team members. Assist location managers with daily operations, including: Pricing work orders Requisitioning parts Shop organization Supervising service department staff Perform duties of all Technician roles as needed. Support team members during high business demand. Adhere to all safety regulations and procedures at all times. Operate diagnostic and repair equipment, including: Scan tools DSO Smoke machines Other required service tools Maintain personal and company-provided tools. Perform additional tasks as needed to ensure excellent customer service and smooth shop operations. Success Factors Strong belief in safety - being safe 100% of the time is the expectation Alignment with company mission, vision, and values Strong work ethic with a results-driven mindset Team-oriented with the ability to adapt to diverse team members Ability to thrive in a fast-paced, high-volume environment Excellent verbal and written communication skills Strong time management, accountability, and prioritization skills Organized, solution-oriented, and proactive problem solver Self-motivated and goal-oriented Strong critical thinker with high attention to detail Highly customer-centric with strong relationship-building skills Subject matter expert in: Automotive systems Advanced diagnostic and repair techniques Standard automotive diagnostic tools and equipment Ability to guide, train, and support junior technicians and service staff Ability to: Read and interpret safety rules and procedure manuals Write routine reports and correspondence Communicate effectively with customers and team members Ability to perform basic calculations, compute rates, ratios, and percentages, and interpret graphs Work Environment Fast-paced automotive service setting Frequent exposure to varying temperatures Regular contact with automotive chemicals (solvents, lubricants, fluids) Extended periods of standing, bending, and lifting tires or equipment Strict adherence to safety procedures and PPE requirements Team-oriented environment requiring reliability and effective communication Strong attention to detail and commitment to quality service Experience and Education Minimum 5 years of automotive repair experience Certified Master Technician with advanced diagnostic and repair expertise ASE Certifications in one or more of the following: Suspension & Steering Brakes Heating & Air Conditioning Refrigerant Recovery & Recycling Engine Repair Electrical/Electronic Systems Engine Performance Advanced Engine Performance Automatic Transmission/Transaxle Manual Drive Train & Axles Valid driver's license required Benefits Job Stability You Can Count On Continuous Learning and Development Career Growth Opportunities A Culture That Cares The Tools to Succeed Comprehensive Benefits Package: Health & Wellness: Medical, dental, and vision coverage; fully covered preventive care; critical illness and wellness benefits. Financial Security: Life and AD&D insurance, disability coverage, and a 401(k) plan with company match. Work & Family: Employee Assistance Program, paid time off plus six company holidays, employee discounts, and education support. Driven by Dobbs is an equal opportunity employer. All candidates must complete a selection assessment and pre-employment screenings.

Company - Tyson Power Only This fleet‘s drivers primarily operate in Iowa, Nebraska, Minnesota, Missouri, Wisconsin, Kansas, Indiana, Ohio, Michigan, and Illinois (including Chicago). Potential runs to the East Coast and Florida are possible. Company Drivers enjoy the following: $1,350 Availability Incentive Pay Availability Incentive Pay is subject to restrictions and inclusive of any per diem pay. Must be available for six days of dispatch Annual Increase in Availability Incentive Pay 1 Year Tenure - $1,375 2 Years Tenure - $1,400 3 Years Tenure - $1,450 4 Years Tenure - $1,500 5 Years Tenure - $1,550 Weekly to Biweekly Home Time (Weekly only available in select locations) Monthly Safety & Performance Incentive Bonus Benefit Package Vacation Pay (after 1 year) Pet & Passenger Policy Free SiriusXM & 24‘ SmartTV Monthly Safety & Performance Incentive Bonus The incremental bonus is $0.05 to $0.15/mile above 3,999 during the four-week bonus period. The operator must qualify for all four weeks of the bonus period with no accidents, claims, CSA points, citations, or service failures. Miles 0 - 3,999 = $0.00 Miles 4,000 - 5,999 = $0.05/mile Miles 6,000 - 7,999 = $0.10/mile Miles 8,000+ = $0.15/mile Example The operator has 4 safe weeks during the bonus period and runs 8,650 dispatched miles during this time. The operator will earn: No extra pay for miles 0 - 3,999 $0.05/mile for miles 4,000 - 5,999 = $99.95 (1,999 miles) $0.10/mile for miles 6,000 - 7,999 = $199.90 (1,999 miles) $0.15/mile for miles over 8,000 = $97.50 (650 miles) Total monthly bonus payout: $397.50 Pay Information Per Diem Reimbursement: $0.15 CPM, for an average of $59 per day of non-taxable income. Included in the rate of pay below. Base Pay: Total listed on the chart below less Per Diem Equipment Newer Model Equipment Large capacity refrigerator 24‘ SmartTV Free SiriusXM Satellite Radio Heated & cooled seats Automatic high beams Blind spot technology Automatic windshield wipers Lane assist sensors Details Passenger & Pet Policy Direct Deposit E-Logs Pre-Planned Dispatch Trucks Equipped with Best Pass & PrePass Trucks Governed at 70 MPH Hirschbach App Scan paperwork, get payroll information, receive mobile communication messages, and much more from your phone. So Much More Medical, Dental, & Vision Free $10,000 Life Insurance Policy Vacation Pay after 1 year 401K with company match Critical Illness Options Driver Referral Program Driver Influencer Program - Earn money by posting on social media Annual Driver Award Ceremony - The Best of the Best

Dana is a global leader in the supply of highly engineered driveline, sealing, and thermal-management technologies that improve the efficiency and performance of vehicles with both conventional and alternative-energy powertrains. Serving three primary markets - passenger vehicle, commercial truck, and off-highway equipment - Dana provides the world's original-equipment manufacturers and the aftermarket with local product and service support through a network of nearly 100 engineering, manufacturing, and distribution facilities. Current Starting Base Wage = $32.85 with Journeyman Card or $31.01 without Journeyman Card 2nd & 3rd Shifts earn an additional $0.50 cents per hour for shift premium GENERAL SUMMARY: Perform a variety of maintenance, repairs, continuous improvement, and new installation functions on plant equipment and machinery with limited direction and guidance. Support manufacturing operations in a spirit of teamwork and cooperation. Troubleshoot and resolve issues in a timely fashion. Safely, professionally and efficiently, complete wiring projects and new installations per electrical line-up and documentation. JOB RESPONSIBILITIES: * 1. Troubleshoot and repair machinery and equipment with minimal supervision using safe electrical techniques, schematics and diagnostic instruments. Perform mechanical functions and incidental work as needed to achieve assigned task. Verify equipment as functional and leave the area clean and safe. * 2. Operate in response to requests by maintenance supervisor or support personnel, and set priorities as required to maximize equipment uptime. * 3. Gather and maintain a complete set of required tools, including electrical meters and diagnostic devices. Utilize diagnostic tools and electrical schematics to define problem areas and assist with resolution. Develop PLC skills to troubleshoot controls related issues. * 4. Participate in preventive and predictive maintenance programs to improve operational uptime and equipment life. Recommend improvements and/or changes to PM systems/tasks when applicable. * 5. Follow designated work instructions as outlined for specific functions. These include, but are not limited to; PM work orders, continuous improvement tasks, new installation line-ups and repair/refurbish assignments. * 6. Update drawings/prints, suggest spare parts and suitable replacements, run conduit/wire-way and power drops. Build, label and wire panels/boxes in a professional manner per line-up and schematics. * 7. Follow standard practices and governmental regulations and laws relating to powered equipment. * 8. Perform other related duties as assigned by immediate supervisor and management. *essential functions KNOWLEDGE, SKILLS AND ABILITIES: * 1. Electrical journeyman's card or equivalent work experience. * 2. High school diploma or equivalent. * 3. Ability to pass an Electrician aptitude test. * 4. Knowledge of industrial, mechanical and electrical codes, techniques and standards. Familiarity with government regulations for industry, and safe work practices dealing with high voltage circuits. * 5. Must have strong background in electrical, hydraulic, pneumatic, robotic arms, and overall machine troubleshooting skills. * 6. Skilled understanding and experience with electrical schematics and ladder diagrams. Expertise with meters and diagnostic instruments used to evaluate electrical systems, both low and high voltage and AC/DC circuits. * 7. Ability to read electrical schematics, specify and gather material and complete wiring installation or repairs with minimal supervision. * 8. Familiarity with complex machinery, electrical circuits and plant operating equipment. Should maintain a sense of urgency, self-motivation and overall good work ethic while performing tasks in a safe manner. * 9. Skilled in interpersonal relations and written and oral communications. ***THIS POSITION IS LOCATED AT THE WARREN, MICHIGAN FACILITY*** INDWM We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Join our team of 40,000 problem solvers who are fostering a culture of innovation by leveraging the diverse perspectives of our global team. We believe in facing challenges head-on by finding opportunity and uncovering possibility, where roadblocks and barriers become targets instead of obstacles. We are One Dana with limitless opportunity. Our Values Value Others Inspire Innovation Grow Responsibly Win Together

Job Description Automotive Alignment Technicians NTB and Tire Kingdom are proud to join the Mavis Tire Family. We're looking for full-time Automotive Alignment Technicians to join Team Mavis at one of our state-of-the-art automotive service, repair and tire sales centers in the Rock Hill, SC area. With over 2,000 retail locations, Mavis is one of the largest tire sales and automotive repair chains in the United States. About the Position of Automotive Alignment Technician Automotive Alignment technicians use the latest equipment to align newly-mounted tires and wheels on customer's vehicles. By measuring and adjusting caster, camber, toe and thrust angles, our Automotive Alignment Technicians reduce customer's tire wear and ensure serviced vehicles travel straight and true. Mavis's Alignment Technicians also complete state-mandated inspections, oil and filter changes and flat repairs, and perform any other required automotive service or vehicle repairs to customer vehicles. Employee Benefits At Mavis, we understand that our people drive our success. We provide our team members with competitive weekly pay, including weekly incentive compensation, a good working environment and an excellent combination of additional benefits like health, dental and vision insurance, a 401(k) retirement savings plan with employer match, paid vacations, paid time off, paid holidays, life insurance, on-the-job training, and opportunities for career growth and advancement. Qualifications We recruit team members who share our commitment to providing complete customer satisfaction and delivering the highest quality service. To be eligible for the position of Automotive Alignment Technician you must (1) be at least 18 years of age; (2) be legally authorized to work in the United States; and (3) possess 1 year of experience and/or training in dismounting, mounting, rotating and balancing tires or any combination of education, training and experience which demonstrates the ability to perform the duties and responsibilities of the position. In addition, it is preferred that Automotive Alignment Technicians possess a state inspection license. As an active position, Automotive Alignment Technicians are required to stand, walk, bend, kneel, stoop, crouch, crawl, climb, pull, reach and perform repeated and repetitive movements consistent with vehicle and tire maintenance and repair. Alignment Technicians must regularly lift and/or move items weighing over 50 pounds. What are you waiting for? APPLY NOW! Candidates can apply online at ********************** OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in during store hours for an immediate interview. If you have any additional questions, you may call the Recruitment department toll-free # at ************. For more information about Mavis, please visit ************** Mavis is an Equal Opportunity Employer Consistent with our commitment to the principle of equal employment opportunity for all individuals, we enforce a zero-tolerance policy on discrimination at Mavis. Employment decisions are made without regard to an applicant's or employee's actual or perceived race, color, religion, creed, sex, pregnancy, sexual orientation, national origin, age, ancestry, ethnicity, disability, citizenship, alienage, marital status, domestic or civil union partnership status, familial status, caregiver status, military or veteran status, transgender status, gender identity or expression, genetic information, predisposing genetic characteristic, status as a victim of domestic violence, stalking and sex offenses, or any other status protected by applicable federal, state or local laws, regulations or ordinances. Exceptions or modifications to certain job duties and/or expected schedules may be provided for an employee who needs a reasonable accommodation for: (a) a sincerely held religious belief, observance or practice that conflicts with the expected schedule for a position; or (b) an otherwise qualified individual with a disability, unless such accommodation poses an undue hardship on our business, in accordance with applicable federal, state and local laws. Additional information is available by contacting *********************** . We will endeavor to make a reasonable accommodation / modification to the known physical or mental limitations of a qualified applicant with a disability to assist in the hiring process, unless the accommodation would impose an undue hardship on the operations of our business, in accordance with applicable federal, state and local laws. If you believe you require such assistance to complete this Application for Employment or to participate in the interview process, please contact our Employee Experience team at ************** ext. 5631. We also will endeavor to provide reasonable accommodation for a job applicant's or an employee's sincerely held religious beliefs, observances, or practices that conflict with a work requirement unless the accommodation poses an undue hardship to our business, in accordance with applicable federal, state and local laws. If you believe you require such an accommodation, please contact our Employee Experience team at ************** ext. 5631. In addition, applicants may report any instances of perceived discrimination through HRConnect either by calling toll-free at ************** or by sending an email to *********************** . Job Posted by ApplicantPro

Company - Tyson Power Only This fleet‘s drivers primarily operate in Iowa, Nebraska, Minnesota, Missouri, Wisconsin, Kansas, Indiana, Ohio, Michigan, and Illinois (including Chicago). Potential runs to the East Coast and Florida are possible. Company Drivers enjoy the following: $1,350 Availability Incentive Pay Availability Incentive Pay is subject to restrictions and inclusive of any per diem pay. Must be available for six days of dispatch Annual Increase in Availability Incentive Pay 1 Year Tenure - $1,375 2 Years Tenure - $1,400 3 Years Tenure - $1,450 4 Years Tenure - $1,500 5 Years Tenure - $1,550 Weekly to Biweekly Home Time (Weekly only available in select locations) Monthly Safety & Performance Incentive Bonus Benefit Package Vacation Pay (after 1 year) Pet & Passenger Policy Free SiriusXM & 24‘ SmartTV Monthly Safety & Performance Incentive Bonus The incremental bonus is $0.05 to $0.15/mile above 3,999 during the four-week bonus period. The operator must qualify for all four weeks of the bonus period with no accidents, claims, CSA points, citations, or service failures. Miles 0 - 3,999 = $0.00 Miles 4,000 - 5,999 = $0.05/mile Miles 6,000 - 7,999 = $0.10/mile Miles 8,000+ = $0.15/mile Example The operator has 4 safe weeks during the bonus period and runs 8,650 dispatched miles during this time. The operator will earn: No extra pay for miles 0 - 3,999 $0.05/mile for miles 4,000 - 5,999 = $99.95 (1,999 miles) $0.10/mile for miles 6,000 - 7,999 = $199.90 (1,999 miles) $0.15/mile for miles over 8,000 = $97.50 (650 miles) Total monthly bonus payout: $397.50 Pay Information Per Diem Reimbursement: $0.15 CPM, for an average of $59 per day of non-taxable income. Included in the rate of pay below. Base Pay: Total listed on the chart below less Per Diem Equipment Newer Model Equipment Large capacity refrigerator 24‘ SmartTV Free SiriusXM Satellite Radio Heated & cooled seats Automatic high beams Blind spot technology Automatic windshield wipers Lane assist sensors Details Passenger & Pet Policy Direct Deposit E-Logs Pre-Planned Dispatch Trucks Equipped with Best Pass & PrePass Trucks Governed at 70 MPH Hirschbach App Scan paperwork, get payroll information, receive mobile communication messages, and much more from your phone. So Much More Medical, Dental, & Vision Free $10,000 Life Insurance Policy Vacation Pay after 1 year 401K with company match Critical Illness Options Driver Referral Program Driver Influencer Program - Earn money by posting on social media Annual Driver Award Ceremony - The Best of the Best

Employment Type: Full Time Salary Range: $20.00 - $45.00 Hourly To be a team member of the Driven by Dobbs family, you must be dedicated to supporting the company's mission, vision, and values. Our Mission To be the leader in the automotive tire and service aftermarket industry in every market where we operate by providing premier service to our guests. Position Title Master Technician Position Overview Driven by Dobbs brings together Dobbs Tire and Auto Centers and Conrad's Tire Express & Total Car Care. Founded in 1976 and 1969 respectively, our family of brands has grown into a rapidly expanding, multi-market automotive service organization. By 2026, we will operate across eight states, with continued growth ahead. Across all locations, we provide a full selection of quality tire brands and comprehensive automotive services, ranging from routine maintenance to advanced diagnostics and engine repair. Our investment in training, development, safety, and team wellbeing empowers our people to deliver exceptional service every day. Rooted in a culture that extends beyond the shop, we proudly support local organizations and charities in the communities where we live and work. We are seeking a Master Technician to serve as a consultant for diagnostic work, vehicle repairs, and service procedures. This role provides technical expertise, leadership, and guidance to the service department, ensuring high-quality work and efficient operations. The ideal candidate demonstrates: Drive and reliability A desire to learn Speed of execution Strong attention to detail All contributing to the exceptional service our customers expect. Roles and Responsibilities Diagnose and repair vehicles accurately, efficiently, and to a high standard. Perform advanced removal, replacement, and diagnostic work on systems including: Emission control systems Throttle body injection Computerized electrical and ignition systems Anti-lock brakes Cruise control Drivability concerns Automatic transmissions A/C systems Four-wheel drive components Train and mentor service department team members. Assist location managers with daily operations, including: Pricing work orders Requisitioning parts Shop organization Supervising service department staff Perform duties of all Technician roles as needed. Support team members during high business demand. Adhere to all safety regulations and procedures at all times. Operate diagnostic and repair equipment, including: Scan tools DSO Smoke machines Other required service tools Maintain personal and company-provided tools. Perform additional tasks as needed to ensure excellent customer service and smooth shop operations. Success Factors Strong belief in safety - being safe 100% of the time is the expectation Alignment with company mission, vision, and values Strong work ethic with a results-driven mindset Team-oriented with the ability to adapt to diverse team members Ability to thrive in a fast-paced, high-volume environment Excellent verbal and written communication skills Strong time management, accountability, and prioritization skills Organized, solution-oriented, and proactive problem solver Self-motivated and goal-oriented Strong critical thinker with high attention to detail Highly customer-centric with strong relationship-building skills Subject matter expert in: Automotive systems Advanced diagnostic and repair techniques Standard automotive diagnostic tools and equipment Ability to guide, train, and support junior technicians and service staff Ability to: Read and interpret safety rules and procedure manuals Write routine reports and correspondence Communicate effectively with customers and team members Ability to perform basic calculations, compute rates, ratios, and percentages, and interpret graphs Work Environment Fast-paced automotive service setting Frequent exposure to varying temperatures Regular contact with automotive chemicals (solvents, lubricants, fluids) Extended periods of standing, bending, and lifting tires or equipment Strict adherence to safety procedures and PPE requirements Team-oriented environment requiring reliability and effective communication Strong attention to detail and commitment to quality service Experience and Education Minimum 5 years of automotive repair experience Certified Master Technician with advanced diagnostic and repair expertise ASE Certifications in one or more of the following: Suspension & Steering Brakes Heating & Air Conditioning Refrigerant Recovery & Recycling Engine Repair Electrical/Electronic Systems Engine Performance Advanced Engine Performance Automatic Transmission/Transaxle Manual Drive Train & Axles Valid driver's license required Benefits Job Stability You Can Count On Continuous Learning and Development Career Growth Opportunities A Culture That Cares The Tools to Succeed Comprehensive Benefits Package: Health & Wellness: Medical, dental, and vision coverage; fully covered preventive care; critical illness and wellness benefits. Financial Security: Life and AD&D insurance, disability coverage, and a 401(k) plan with company match. Work & Family: Employee Assistance Program, paid time off plus six company holidays, employee discounts, and education support. Driven by Dobbs is an equal opportunity employer. All candidates must complete a selection assessment and pre-employment screenings.

Job Description AUTOMOTIVE TIRE TECHNICIANS ($800 New Hire Bonus) NTB and Tire Kingdom are proud to join the Mavis Tire family. We're looking for full-time Automotive Tire Technicians to join Team Mavis TODAY at our state-of-the-art automotive service and retail tire sales centers in the Rock Hill, SC area. With over 2,000 retail locations, Mavis is one of the largest tire sales and automotive repair chains in the United States. Mavis offers eligible Automotive Tire Technicians GUARANTEED WEEKLY BONUS PAYMENTS during the introductory period of employment, totaling up to $800! WHAT IS THIS GREAT CAREER OPPORTUNITY? As an Automotive Tire Technician, you're the backbone of our business. That's why you'll realize the rewards of a career with competitive, guaranteed base compensation PLUS additional earning potential through significant weekly bonus payments. The starting base rate of pay for an Automotive Tire Technician is negotiable. NO EXPERIENCE IS NEEDED! We'll teach you everything you need to know through PAID TRAINING. To help introduce you to our weekly performance-based incentive programs and to give us an opportunity to coach you on our industry-leading processes, Mavis offers eligible Automotive Tire Technicians GUARANTEED WEEKLY BONUS PAYMENTS during the introductory period of employment, totaling up to $800! Automotive Tire Technicians install new tires and wheels and perform tire services -- like rotations, balancing and flat repairs -- to keep our valued customers' vehicles operating safely. While providing best-in-class automotive service, you'll get weekly bonus payments tied to every single service you perform on top of your guaranteed hourly rate . Take the first step on an exciting career path by becoming an Automotive Tire Technician with Mavis! HOW DO I KNOW IF A CAREER WITH MAVIS IS RIGHT FOR ME? You'd be a great fit for the Automotive Tire Technician position if you: like paid training and using proven processes; are motivated by commissions/incentive compensation; value reliability, punctuality and teamwork; love working in a fast-paced environment; enjoy staying active; are open to learning; care about meeting customer-promised delivery times and providing quality service; want to work for a growing company that promotes from within; and, love working in a safe, state-of-the-art environment. To be eligible for the Automotive Tire Technician position you must: be at least 18 years of age; be legally authorized to work in the United States; and, be able to work 5 days each week. WHY WILL I LOVE WORKING WITH MAVIS? At Mavis, we understand that our people are our greatest asset. We value our team members' hard work and that's why proudly offer you benefits and rewards to support your lifestyle and well-being. As an Automotive Tire Technician, you can expect: A safe, positive working environment; An excellent combination of fringe benefits, like health, vision and dental insurance; A 401(k) retirement savings plan with employer match; Paid vacations; Paid time off; Paid holidays; Life insurance; Paid on-the-job training; and, Opportunities for career growth and advancement. What are you waiting for? APPLY NOW! Candidates can apply online at ********************** OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in during store hours for an immediate interview. If you have any additional questions, you may call the Recruitment department toll-free # at ************. For more information about Mavis, please visit ************** Mavis is an Equal Opportunity Employer Consistent with our commitment to the principle of equal employment opportunity for all individuals, we enforce a zero-tolerance policy on discrimination at Mavis. Employment decisions are made without regard to an applicant's or employee's actual or perceived race, color, religion, creed, sex, pregnancy, sexual orientation, national origin, age, ancestry, ethnicity, disability, citizenship, alienage, marital status, domestic or civil union partnership status, familial status, caregiver status, military or veteran status, transgender status, gender identity or expression, genetic information, predisposing genetic characteristic, status as a victim of domestic violence, stalking and sex offenses, or any other status protected by applicable federal, state or local laws, regulations or ordinances. Exceptions or modifications to certain job duties and/or expected schedules may be provided for an employee who needs a reasonable accommodation for: (a) a sincerely held religious belief, observance or practice that conflicts with the expected schedule for a position; or (b) an otherwise qualified individual with a disability, unless such accommodation poses an undue hardship on our business, in accordance with applicable federal, state and local laws. Additional information is available by contacting *********************** . We will endeavor to make a reasonable accommodation / modification to the known physical or mental limitations of a qualified applicant with a disability to assist in the hiring process, unless the accommodation would impose an undue hardship on the operations of our business, in accordance with applicable federal, state and local laws. If you believe you require such assistance to complete this Application for Employment or to participate in the interview process, please contact our Employee Experience team at ************** ext. 5631. We also will endeavor to provide reasonable accommodation for a job applicant's or an employee's sincerely held religious beliefs, observances, or practices that conflict with a work requirement unless the accommodation poses an undue hardship to our business, in accordance with applicable federal, state and local laws. If you believe you require such an accommodation, please contact our Employee Experience team at ************** ext. 5631. In addition, applicants may report any instances of perceived discrimination through HRConnect either by calling toll-free at ************** or by sending an email to *********************** . Job Posted by ApplicantPro

Company - Tyson Power Only This fleet‘s drivers primarily operate in Iowa, Nebraska, Minnesota, Missouri, Wisconsin, Kansas, Indiana, Ohio, Michigan, and Illinois (including Chicago). Potential runs to the East Coast and Florida are possible. Company Drivers enjoy the following: $1,350 Availability Incentive Pay Availability Incentive Pay is subject to restrictions and inclusive of any per diem pay. Must be available for six days of dispatch Annual Increase in Availability Incentive Pay 1 Year Tenure - $1,375 2 Years Tenure - $1,400 3 Years Tenure - $1,450 4 Years Tenure - $1,500 5 Years Tenure - $1,550 Weekly to Biweekly Home Time (Weekly only available in select locations) Monthly Safety & Performance Incentive Bonus Benefit Package Vacation Pay (after 1 year) Pet & Passenger Policy Free SiriusXM & 24‘ SmartTV Monthly Safety & Performance Incentive Bonus The incremental bonus is $0.05 to $0.15/mile above 3,999 during the four-week bonus period. The operator must qualify for all four weeks of the bonus period with no accidents, claims, CSA points, citations, or service failures. Miles 0 - 3,999 = $0.00 Miles 4,000 - 5,999 = $0.05/mile Miles 6,000 - 7,999 = $0.10/mile Miles 8,000+ = $0.15/mile Example The operator has 4 safe weeks during the bonus period and runs 8,650 dispatched miles during this time. The operator will earn: No extra pay for miles 0 - 3,999 $0.05/mile for miles 4,000 - 5,999 = $99.95 (1,999 miles) $0.10/mile for miles 6,000 - 7,999 = $199.90 (1,999 miles) $0.15/mile for miles over 8,000 = $97.50 (650 miles) Total monthly bonus payout: $397.50 Pay Information Per Diem Reimbursement: $0.15 CPM, for an average of $59 per day of non-taxable income. Included in the rate of pay below. Base Pay: Total listed on the chart below less Per Diem Equipment Newer Model Equipment Large capacity refrigerator 24‘ SmartTV Free SiriusXM Satellite Radio Heated & cooled seats Automatic high beams Blind spot technology Automatic windshield wipers Lane assist sensors Details Passenger & Pet Policy Direct Deposit E-Logs Pre-Planned Dispatch Trucks Equipped with Best Pass & PrePass Trucks Governed at 70 MPH Hirschbach App Scan paperwork, get payroll information, receive mobile communication messages, and much more from your phone. So Much More Medical, Dental, & Vision Free $10,000 Life Insurance Policy Vacation Pay after 1 year 401K with company match Critical Illness Options Driver Referral Program Driver Influencer Program - Earn money by posting on social media Annual Driver Award Ceremony - The Best of the Best

Employment Type: Full Time Salary Range: $20.00 - $45.00 Hourly To be a team member of the Driven by Dobbs family, you must be dedicated to supporting the company's mission, vision, and values. Our Mission To be the leader in the automotive tire and service aftermarket industry in every market where we operate by providing premier service to our guests. Position Title Master Technician Position Overview Driven by Dobbs brings together Dobbs Tire and Auto Centers and Conrad's Tire Express & Total Car Care. Founded in 1976 and 1969 respectively, our family of brands has grown into a rapidly expanding, multi-market automotive service organization. By 2026, we will operate across eight states, with continued growth ahead. Across all locations, we provide a full selection of quality tire brands and comprehensive automotive services, ranging from routine maintenance to advanced diagnostics and engine repair. Our investment in training, development, safety, and team wellbeing empowers our people to deliver exceptional service every day. Rooted in a culture that extends beyond the shop, we proudly support local organizations and charities in the communities where we live and work. We are seeking a Master Technician to serve as a consultant for diagnostic work, vehicle repairs, and service procedures. This role provides technical expertise, leadership, and guidance to the service department, ensuring high-quality work and efficient operations. The ideal candidate demonstrates: Drive and reliability A desire to learn Speed of execution Strong attention to detail All contributing to the exceptional service our customers expect. Roles and Responsibilities Diagnose and repair vehicles accurately, efficiently, and to a high standard. Perform advanced removal, replacement, and diagnostic work on systems including: Emission control systems Throttle body injection Computerized electrical and ignition systems Anti-lock brakes Cruise control Drivability concerns Automatic transmissions A/C systems Four-wheel drive components Train and mentor service department team members. Assist location managers with daily operations, including: Pricing work orders Requisitioning parts Shop organization Supervising service department staff Perform duties of all Technician roles as needed. Support team members during high business demand. Adhere to all safety regulations and procedures at all times. Operate diagnostic and repair equipment, including: Scan tools DSO Smoke machines Other required service tools Maintain personal and company-provided tools. Perform additional tasks as needed to ensure excellent customer service and smooth shop operations. Success Factors Strong belief in safety - being safe 100% of the time is the expectation Alignment with company mission, vision, and values Strong work ethic with a results-driven mindset Team-oriented with the ability to adapt to diverse team members Ability to thrive in a fast-paced, high-volume environment Excellent verbal and written communication skills Strong time management, accountability, and prioritization skills Organized, solution-oriented, and proactive problem solver Self-motivated and goal-oriented Strong critical thinker with high attention to detail Highly customer-centric with strong relationship-building skills Subject matter expert in: Automotive systems Advanced diagnostic and repair techniques Standard automotive diagnostic tools and equipment Ability to guide, train, and support junior technicians and service staff Ability to: Read and interpret safety rules and procedure manuals Write routine reports and correspondence Communicate effectively with customers and team members Ability to perform basic calculations, compute rates, ratios, and percentages, and interpret graphs Work Environment Fast-paced automotive service setting Frequent exposure to varying temperatures Regular contact with automotive chemicals (solvents, lubricants, fluids) Extended periods of standing, bending, and lifting tires or equipment Strict adherence to safety procedures and PPE requirements Team-oriented environment requiring reliability and effective communication Strong attention to detail and commitment to quality service Experience and Education Minimum 5 years of automotive repair experience Certified Master Technician with advanced diagnostic and repair expertise ASE Certifications in one or more of the following: Suspension & Steering Brakes Heating & Air Conditioning Refrigerant Recovery & Recycling Engine Repair Electrical/Electronic Systems Engine Performance Advanced Engine Performance Automatic Transmission/Transaxle Manual Drive Train & Axles Valid driver's license required Benefits Job Stability You Can Count On Continuous Learning and Development Career Growth Opportunities A Culture That Cares The Tools to Succeed Comprehensive Benefits Package: Health & Wellness: Medical, dental, and vision coverage; fully covered preventive care; critical illness and wellness benefits. Financial Security: Life and AD&D insurance, disability coverage, and a 401(k) plan with company match. Work & Family: Employee Assistance Program, paid time off plus six company holidays, employee discounts, and education support. Driven by Dobbs is an equal opportunity employer. All candidates must complete a selection assessment and pre-employment screenings.

Company - Tyson Power Only This fleet‘s drivers primarily operate in Iowa, Nebraska, Minnesota, Missouri, Wisconsin, Kansas, Indiana, Ohio, Michigan, and Illinois (including Chicago). Potential runs to the East Coast and Florida are possible. Company Drivers enjoy the following: $1,350 Availability Incentive Pay Availability Incentive Pay is subject to restrictions and inclusive of any per diem pay. Must be available for six days of dispatch Annual Increase in Availability Incentive Pay 1 Year Tenure - $1,375 2 Years Tenure - $1,400 3 Years Tenure - $1,450 4 Years Tenure - $1,500 5 Years Tenure - $1,550 Weekly to Biweekly Home Time (Weekly only available in select locations) Monthly Safety & Performance Incentive Bonus Benefit Package Vacation Pay (after 1 year) Pet & Passenger Policy Free SiriusXM & 24‘ SmartTV Monthly Safety & Performance Incentive Bonus The incremental bonus is $0.05 to $0.15/mile above 3,999 during the four-week bonus period. The operator must qualify for all four weeks of the bonus period with no accidents, claims, CSA points, citations, or service failures. Miles 0 - 3,999 = $0.00 Miles 4,000 - 5,999 = $0.05/mile Miles 6,000 - 7,999 = $0.10/mile Miles 8,000+ = $0.15/mile Example The operator has 4 safe weeks during the bonus period and runs 8,650 dispatched miles during this time. The operator will earn: No extra pay for miles 0 - 3,999 $0.05/mile for miles 4,000 - 5,999 = $99.95 (1,999 miles) $0.10/mile for miles 6,000 - 7,999 = $199.90 (1,999 miles) $0.15/mile for miles over 8,000 = $97.50 (650 miles) Total monthly bonus payout: $397.50 Pay Information Per Diem Reimbursement: $0.15 CPM, for an average of $59 per day of non-taxable income. Included in the rate of pay below. Base Pay: Total listed on the chart below less Per Diem Equipment Newer Model Equipment Large capacity refrigerator 24‘ SmartTV Free SiriusXM Satellite Radio Heated & cooled seats Automatic high beams Blind spot technology Automatic windshield wipers Lane assist sensors Details Passenger & Pet Policy Direct Deposit E-Logs Pre-Planned Dispatch Trucks Equipped with Best Pass & PrePass Trucks Governed at 70 MPH Hirschbach App Scan paperwork, get payroll information, receive mobile communication messages, and much more from your phone. So Much More Medical, Dental, & Vision Free $10,000 Life Insurance Policy Vacation Pay after 1 year 401K with company match Critical Illness Options Driver Referral Program Driver Influencer Program - Earn money by posting on social media Annual Driver Award Ceremony - The Best of the Best