Combo Welder jobs at Turner Industries - 407 jobs

Turner Industries is a fully diversified industrial contractor. We help move the world forward by providing responsive, innovative solutions designed to increase plant production, reduce costs, reduce downtime, and even prevent shutdowns. Headquartered in Baton Rouge, LA, Turner Industries has over 20,000 employees with offices and job sites across the United States. Our single-solution approach in the petrochemical, refining, energy, pulp and paper, and related industries has made Turner one of the nation's top industrial contractors and earned us the No. 1 spot on ABC's 2024 Top Performers list. People are at the heart of everything we do. Their safety, security, and satisfaction have always been our top priorities. For proof, look no further than our strong working relationships and extraordinary workforce. We are seeking a Certified Pipe Welder for a position in Hopewell, VA. The Welder position lays out, fits, and welds fabricated, cast, and forged components to assemble structural forms, such as tanks, pressure vessels, furnace shells, pipe and building and bridge parts. Non-exempt role; Reports to the Foreman; Assigned duties according to specific procedures / work is checked frequently. Essential Qualifications: * High school or equivalent * Minimum four (4) years of experience in specified skill * 6G, Stick, TIG, Stainless, Carbon Steel, Chrome * Must be able to pass X-Ray and UT * Must be a local candidate * Must be able to pass a weld test before being hired * Must be certified as a welder * Written pre-employment qualification test * Post-offer drug/alcohol screen and physical evaluation * Job site safety requirements as required by the client (clean shaven, long sleeves, steel toe boots, etc.) * Safety equipment as required by the client (hard hat, safety glasses, gloves, respirator, hearing protection, safety harness with lanyard, etc.) * Applicant/employee must not pose a direct threat to the health or safety of others in the workplace Functional Requirements: Selects equipment and plans layout, assembly, and welding, Lays out, positions, aligns, and fits components together, Bolts, clamps, tacks parts to secure in position for welding, Sets up equipment and welds parts, May assemble parts by bolting and riveting, May weld pipe such as carbon steel, stainless steel, chrome, etc. by process of arc, heliarc, gas, tig, etc., May weld pipe, sheet metal, structural steel, brackets, or other materials, May repair products by dismantling, straightening, reshaping, and reassembling parts, May use cutting torch to cut materials and demo existing assemblies, Perform additional assignments per supervisor's direction. Compensation Final agreed upon compensation is based upon individual qualifications and experience. Benefits Depending on your employment status, benefits include health, dental, vision, life, ADD, voluntary life / ADD, disability benefits, leaves of absence, 401k, paid time off, paid holidays, telehealth access, and employee assistance program. Physical Involvement: Employee may be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds, structures, etc.; reaching in all directions, handling and manipulating objects and materials; coordinating the movement of eyes, hands and fingers to operate tools and equipment; lifting 30-50 lbs. from ground level, waist level, and/or overhead; carrying objects, tools, etc.; standing; sitting; walking; seeing with or without correction; hearing with or without correction; following set procedures and standards; applying basic mathematical skills; planning work; comparing and understanding differences in the size, shape and form of lines, figures and objects; picturing and evaluating solid objects from drawings or diagrams using standards that can be measured or checked; following oral and/or written directions, plans and blueprints; reading; writing; ability to recognize and report safety hazards Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law. Keywords: welding, repair, assembly, hydraulic tools

Are you ready to start "Building America"? At Lexicon, we're seeking a skilled Welder to join our team and be a part of our continued success. Offering competitive pay ranging between $26-$30/hr with a $100/day per diem, this role presents an exciting opportunity for growth and development! If you're passionate about being a part of a team that values integrity, teamwork, and innovation, then Lexicon is the place for you. Join us and become a part of our growing family as we continue to build a brighter future together. Apply now to embark on an exciting journey with Lexicon! Lexicon Benefits Health, Dental, Vision, and Life Insurance HSA with employer contributions Life Insurance Paid Holidays and Vacation 401k with company match Lexicon University Our Lexicon University provides free career development and training, so employees can improve their skills in their chosen field, learn new skills in another area and build a career path that leads to job satisfaction and success for them and their families. Welder Overview: Embark on an exciting journey as a Welder, where you'll fuse fabricated components to create robust structural forms. Your expertise will be pivotal in assembling vital pieces that form the backbone of our projects. Safety takes center stage in this role, as any oversight in executing essential tasks could pose risks to our team and the wider community. If you're ready to wield your welding skills in a dynamic environment where your contributions shape the landscape and prioritize safety, this is the role for you. Join us and be part of building a safer, stronger future. Welder Pay Range: $26-$30/hour Paid WEEKLY Welder Essential Duties and Responsibilities: Select equipment and plan layout, assembly, and welding applying proper welding techniques. Lay out, position, align, and fit components together. Bolt, clamp and tack-weld parts to secure in position for welding. Set up equipment and welds parts, using arc welding equipment. May assemble parts by bolting. May repair products by dismantling, straightening, reshaping, and reassembling parts using cutting torch, straightening press and other hand tools. The ability to work overtime and regular, punctual attendance is required. Welder Qualifications: Minimum of 3 years' experience as an welder, preferably on a construction site. Must be capable of passing a welding certification test which includes SMAW and FCAW processes. Must be able to read and comprehend welding instructions. Must be familiar with blueprints and/or structural drawings. Must be able to read a tape measure. Must have all required welding tools necessary to perform the above-listed duties. WelderPhysical Demands: Must be able to lift more than 50 pounds frequently on the job and able to climb more than 300 feet. Must be able to pull own weight when climbing stairs, ladders, and scaffolding up to 150 feet. Excessive amounts of bending, stooping, carrying, pushing, and pulling weights up to 50 pounds. Must be able to tolerate temperature fluctuations, a loud and dusty work environment, and able to be around high voltage electromagnetic fields. All the physical demands listed are essential functions. This role is classified as safety sensitive. Candidates must show the capacity to proactively initiate, effectively lead, and consistently uphold safety policies, practices, procedures, and housekeeping standards. Compliance with this requirement is a fundamental condition for employment. You must be legally authorized to work in the United States for our company without the need for current or future visa sponsorship. Note: The company does not provide employment visa sponsorship. Accessibility: If you need an accommodation as part of the employment process please contact Human Resources at Email: ********************* Drug Free Workplace Equal Opportunity Employer, including disabled and veterans. If you want to view the Know Your Rights: Workplace Discrimination is Illegal poster, please choose your language: English - Spanish - Arabic - Chinese English - Spanish - Chinese

Hopkins | Lacy, the Mechanical, Electrical, Plumbing (MEP) division of Branch is searching for a Welder. Welders will weld metal components together to fabricate or repair products, such as piping, machine parts, plant equipment, motors and generators according to layouts, blueprints or work orders, using brazing and variety of arc and gas welding equipment. Duties/Responsibilities * Welds metal parts together using both gas welding and any combination of arc welding processes * Perform other welding related tasks, including thermal cutting and grinding * Repair/Maintain broken or installed components, fills holes and increases size of metal parts * Positions and clamps together components of fabricated metal products preparatory to welding * Attend to work assignment instructions or to supervisor's orders * Exercise critical thinking and reasoning skills * Execute work-place safety regulations * Gather/Collate/Classify information * Assist in the mentoring, training, and growth of other employee-owners Duties/Responsibilities Cont. Qualifications * High School Diploma or Equivalency * 2 years of prior welding experience * Driver's License Competencies Dependability Delivering High Quality Work Following Policies and Procedures Working Safely Displaying Technical Expertise Travel Travel is frequently required to and from job site locations. Supervisory Responsibility Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to use hands and fingers to handle, feel or operate objects, tools or controls, and reach with hands and arms. The employee is frequently required to stand, talk and hear. The employee is occasionally required to walk, sit, climb, balance, stoop, kneel, crouch, crawl, taste and smell. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Position Type/Expected Hours of Work This is a full-time position which will typically involve 40+ hours a week. Due to the nature of the job, the employee must be available on-call early/late hours to deal with delays, bad weather and emergencies at the job site. AAP/EEO Statement It has been and will continue to be a fundamental policy of the Company not to discriminate on the basis of race, color, religion, sex, national origin, age, disability, sexual orientation, gender identity, or status as a veteran, or any other basis protected by applicable federal, state or local law, with respect to recruitment, hiring, training, promotion, and other terms and condition of employment. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Nearest Major Market: Charlottesville Nearest Secondary Market: Virginia Apply now " Find similar jobs: * Careers Home * View All Jobs * Benefits * Life at Branch * branchgroup.com * * * Copyright 2025

Job Description Since 1996, RQ Construction, LLC. has been a leading player in Southern California's robust commercial and governmental Design-Build economy. We have a national and international presence spanning coast to coast, including U.S. Naval Base Guantanamo Bay, Cuba and now, Puerto Rico. We offer management of projects throughout the United States, with our field operations' team members who work on location for each of our projects. We specialize in fast-track projects in new commercial construction with a primary focus in the Department of Defense market. Position Summary: We are looking to hire skilled Combination Pipe Welders in the future to join our Mechanical team for ongoing work at King's Bay Naval Base, GA and the surrounding area. All work is to be performed on the military base and is paid the required Davis-Bacon prevailing wage, specific to the base. Applications are being accepted into a candidate pool for this position at this moment in time. Pay: $45.15 - $50.00 per hour Benefits: Medical, Dental, Vision, 401k with Match, 1 week vacation and sick time. Our Combination Welder will be responsible for using hand-welding, flame cutting, hand soldering, or brazing equipment to weld or join metal components. This position will require the ability to pass groove-weld qualification tests in all positions for multiple materials and processes using both Shielded Metal Arc Welding (SMAW) as well as Gas Tungsten Arc Welding (GTAW) as necessary. All work is completed on an active construction site, and in accordance with relevant codes. Work involves technical application of mechanical welding principles. This is all to be done using the appropriate equipment and implementing the required safety practices in support of RQ's Mission, Vision, and Values. EDUCATION & EXPERIENCE A high school diploma or GED is the preferred minimum formal education for this position. Should be supplemented by completion of a Union, private (in-house), military, or trade school apprenticeship program that includes theory and on-the-job 5 to 8 years (or equivalent) field or trade work experience as a Combination Welder in a commercial, or facilities operations setting is required; government, military, or large commercial construction experience Candidates must be able to pass 6G GTAW & SMAW test before being hired. CPR, First Aid, and OSHA 30-hour Certifications required (training can be provided) Specific training or certificates in the following preferred (training can be provided): Trenching and shoring training Fall protection Confined space training Forklift/Manlift training and certificate Power actuated tools training and certificate Lockout/Tagout training Scissor lift/boom lift certificate EM-385 We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, creed, gender (including gender identity and gender expression), religion (all aspects of religious beliefs, observance or practice, including religious dress or grooming practices) marital status, registered domestic partner status, age, national origin or ancestry, physical or mental disability, medical condition (including cancer or a record or history of cancer, and genetic characteristics), sex (including pregnancy, childbirth, breastfeeding or related medical condition), genetic information, sexual orientation, veteran status, or any other basis or status protected by federal, state, or local law or ordinance or regulation. All candidates considered for hire must provide evidence of identity and U.S. work authorization at the time of hire. Additionally, all candidates must successfully pass a drug screening and commercial criminal background check, including a stricter Department of Defense background check, for access to job site at military base (if applicable for position being hired for). Job Posted by ApplicantPro

Job DescriptionSalary: $36 (DOE) The Pipe Welder Level 3 is a highly skilled welder responsible for executing complex welding tasks on high-pressure piping systems, ensuring precision and adherence to NCCER and industry standards. This role involves mentoring junior welders, troubleshooting fabrication issues, and leading weld quality assurance efforts. Supervisory Responsibilities: May assist in training and mentoring Level 1 and 2 welders. May lead small teams or crews on specific welding assignments. Duties/Responsibilities: Perform high-quality welding on various pipe materials including carbon steel, stainless steel, and exotic alloys. Interpret complex blueprints, P&IDs, and technical specifications. Set up and operate advanced welding equipment for orbital, TIG, and submerged arc welding. Conduct and pass visual and non-destructive testing (NDT) inspections. Maintain detailed weld logs and documentation. Coordinate with engineers and supervisors to resolve design or fabrication issues. Provide leadership to junior welders. Performs other related duties as assigned. Required Skills/Abilities: Mastery of SMAW, GTAW, GMAW, and other advanced welding techniques. Deep understanding of pipe welding codes and standards (e.g., ASME, AWS). Ability to read complex fabrication drawings and schematics. Excellent leadership, communication, and team coordination skills. Precision, efficiency, and attention to safety and detail. Must be able to read and communicate in English to understand technical documents, safety procedures, and instructions relevant to job duties. English proficiency is required due to operational and safety communication needs. Education and Experience: High school diploma or GED required. Completion of NCCER Pipe Welding Levels 1, 2, and 3 modules or equivalent. Minimum 35 years of pipe welding experience in industrial or commercial settings. NDT qualification or certifications preferred. Physical Requirements: Must be able to lift and move up to 100 pounds. Must be able to work in hot, cold, noisy environments and hazardous materials. Frequent standing, bending, and working in confined spaces. Prolonged periods of standing and working in confined or elevated areas. Strict adherence to safety procedures, PPE usage including welding hood, gloves, and safety boots. CSFCO is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age (40 or older), disability, genetic information, veteran status, or any other protected status under applicable federal, state, or local laws.

ABOUT THE TEPA COMPANIES Established in 2005 and owned by the Paskenta Band of Nomlaki Indians, The Tepa Companies deliver comprehensive and sustainable solutions to federal, state, local, and private-sector clients throughout the United States. The tribally owned companies work independently and collaboratively to provide wide-ranging construction, engineering, environmental, industrial, staffing, and technology services. When you join Tepa Companies, you have the opportunity to expand your entrepreneurial skill set while growing professionally alongside the best in the industry. You will have the opportunity to impact your team, the organization as a whole, and subsequently, our Tribe. We seek out top talent to provide the best services for our clients. We focus on being a responsible company for our employees and their families by creating a culture that reflects our core values and offering competitive pay and benefits package. Our benefits package includes comprehensive medical, dental, vision, generous paid time off and holidays, 401(k) plan with company match, life insurance, flexible spending and health savings account, mental health support and resources, short and long-term disability, and tuition reimbursement. LOCATION: This is a nationwide traveling position requiring frequent travel to project sites across the United States. Per diem will be provided. ABOUT THE JOB The Tepa Companies are seeking a Welding Apprentice who will Perform welding tasks under supervision on piping and plate within petroleum operations facilities. In addition to welding, the successful candidate must be able to assist in tasks related to welding such as fit‐up, preparation, repair, inspection, and post weld preparation. As required, the Apprentice Welder will also be tasked to assist with general site work such as loading and unloading equipment and materials, site clean‐up and preparation, mobilization, and demobilization to and from the jobsite, scaffolding erection, general tank construction tasks and other duties as assigned. This role is intended for May 2026 college graduates who majored in an applicable field. As Tepa continues to grow, we are focusing on hiring recent graduates to begin their careers at our organization with opportunities to receive hands-on learning, mentorship, and growth within the company. This is an entry-level position that does not require previous experience but does require completed education in the particular discipline. Job Functions: * Follow welding procedure specifications when welding * Train and assist with performing quality welds able to pass radiographic examination * Train and assist with performing quality welds using various welding process, such as TIG, GMAW, SMAW, FCAW, etc. * Train and assist with producing quality welds with efficiency * Train to perform or assist with fit‐up and preparation of welds * Perform or assist with post weld cleanup, inspection, and repair * Communicate regularly with the Field Foreman regarding issues and concerns on the job site * Train to determine the required tools, materials and welding methods based on the project specifications * Assist with the assembly, installation, and repair of pipe components and systems according to specifications * Inspect all materials, equipment, and tools required to perform the work * Maintain supplies, equipment, and tools * Properly prepare materials by clamping, cutting, or applying chemical solutions to piping * Observe all safety regulations WHAT WE'RE LOOKING FOR * High School diploma or GED * Formal vocational/technical training in GTAW- Gas tungsten arc welding and basic welding processes/procedures * Must be graduating in 2026 from vocational training (May/June graduates preferred) * Must be able to pass a multi-position weld test utilizing the SMAW process * Must be able to pass 2 and 3G plate welding tests * Must be able to perform stick welds on both carbon and stainless-steel plate and pipe * Must be able to utilize large weld rods (3/16" minimum) in multi-positions in an effective and efficient manner * Ability to learn to read and interpret blueprints, schematics, and written instructions * Must have a general knowledge of AWS, API, ANSI, and ASME codes and standards * Must be able to troubleshoot and have a strong attention to detail * Must have physical dexterity * Must be able to follow verbal directions * Must be able to read and write in English * Must be willing to travel for long durations * Must be able to pass a background check required to access US military installations * Must have a valid driver's license Equal Opportunity Employer Veterans

The Pipe Welder Level 3 is a highly skilled welder responsible for executing complex welding tasks on high-pressure piping systems, ensuring precision and adherence to NCCER and industry standards. This role involves mentoring junior welders, troubleshooting fabrication issues, and leading weld quality assurance efforts. Supervisory Responsibilities: * May assist in training and mentoring Level 1 and 2 welders. * May lead small teams or crews on specific welding assignments. Duties/Responsibilities: * Perform high-quality welding on various pipe materials including carbon steel, stainless steel, and exotic alloys. * Interpret complex blueprints, P&IDs, and technical specifications. * Set up and operate advanced welding equipment for orbital, TIG, and submerged arc welding. * Conduct and pass visual and non-destructive testing (NDT) inspections. * Maintain detailed weld logs and documentation. * Coordinate with engineers and supervisors to resolve design or fabrication issues. * Provide leadership to junior welders. * Performs other related duties as assigned. Required Skills/Abilities: * Mastery of SMAW, GTAW, GMAW, and other advanced welding techniques. * Deep understanding of pipe welding codes and standards (e.g., ASME, AWS). * Ability to read complex fabrication drawings and schematics. * Excellent leadership, communication, and team coordination skills. * Precision, efficiency, and attention to safety and detail. * Must be able to read and communicate in English to understand technical documents, safety procedures, and instructions relevant to job duties. English proficiency is required due to operational and safety communication needs. Education and Experience: * High school diploma or GED required. * Completion of NCCER Pipe Welding Levels 1, 2, and 3 modules or equivalent. * Minimum 3-5 years of pipe welding experience in industrial or commercial settings. * NDT qualification or certifications preferred. Physical Requirements: * Must be able to lift and move up to 100 pounds. * Must be able to work in hot, cold, noisy environments and hazardous materials. * Frequent standing, bending, and working in confined spaces. * Prolonged periods of standing and working in confined or elevated areas. * Strict adherence to safety procedures, PPE usage including welding hood, gloves, and safety boots. CSFCO is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age (40 or older), disability, genetic information, veteran status, or any other protected status under applicable federal, state, or local laws.

The Pipe Welder Level 3 is a highly skilled welder responsible for executing complex welding tasks on high-pressure piping systems, ensuring precision and adherence to NCCER and industry standards. This role involves mentoring junior welders, troubleshooting fabrication issues, and leading weld quality assurance efforts. Supervisory Responsibilities: May assist in training and mentoring Level 1 and 2 welders. May lead small teams or crews on specific welding assignments. Duties/Responsibilities: Perform high-quality welding on various pipe materials including carbon steel, stainless steel, and exotic alloys. Interpret complex blueprints, P&IDs, and technical specifications. Set up and operate advanced welding equipment for orbital, TIG, and submerged arc welding. Conduct and pass visual and non-destructive testing (NDT) inspections. Maintain detailed weld logs and documentation. Coordinate with engineers and supervisors to resolve design or fabrication issues. Provide leadership to junior welders. Performs other related duties as assigned. Required Skills/Abilities: Mastery of SMAW, GTAW, GMAW, and other advanced welding techniques. Deep understanding of pipe welding codes and standards (e.g., ASME, AWS). Ability to read complex fabrication drawings and schematics. Excellent leadership, communication, and team coordination skills. Precision, efficiency, and attention to safety and detail. Must be able to read and communicate in English to understand technical documents, safety procedures, and instructions relevant to job duties. English proficiency is required due to operational and safety communication needs. Education and Experience: High school diploma or GED . Completion of NCCER Pipe Welding Levels 1, 2, and 3 modules or equivalent. Minimum 3-5 years of pipe welding experience in industrial or commercial settings. NDT qualification or certifications preferred. Physical Requirements: Must be able to lift and move up to 100 pounds. Must be able to work in hot, cold, noisy environments and hazardous materials. Frequent standing, bending, and working in confined spaces. Prolonged periods of standing and working in confined or elevated areas. Strict adherence to safety procedures, PPE usage including welding hood, gloves, and safety boots. CSFCO is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age (40 or older), disability, genetic information, veteran status, or any other protected status under applicable federal, state, or local laws.

Job Title: Pipe Welder Rotational Schedule: OFFSHORE Crew Change Location: TBD A successful candidate will exhibit characteristics that support the following: Safety Awareness Work Ethic Technical Skill Customer Focus Open Communication Implementing Vision and Values RESPONSIBILITIES: A member of the construction team reporting to a Danos Superintendent. * Ability to perform welding on various materials at required position using different welding processes, including, but not limited to, GTAW, SMAW, FCAW, GMAW and SAW. * Lay out, position, fit and weld various piping and structural components, including pipes, flanges, fittings, valves, piping supports, structural plates, beams, etc., in accordance with the supplied piping/structural fabrication drawings. * Set up, troubleshoot, and operate welding machines according to job specifications and welding procedures. * Adjust valves, gauges, and flames as needed and be capable of handling compressed gas and oxygen cylinders safely. * Operate air arc gouger, grinder, and other industry machines, tools, and equipment. * Participate in JSA's and all other Safety, Health and Environmental Processes. * Conduct behavioral based safety observations. QUALIFICATIONS: 5 or more years prior fabrication experience Must be able to weld multiple alloys with GTAW and SMAW TWIC Recent Offshore Construction experience. Prior rigger experience preferred. Experience using safe work habits. Candidates will be required to complete: 6GR - SMAW 6GR - FCAW 6G - GTAW/SMAW

Job Title: Pipe Welder - Fabrication Rotational Schedule: 5/2 PES Expectations: A successful candidate will exhibit characteristics that support the following: Safety Awareness Work Ethic Technical Skill Customer Focus Open Communication Implementing Vision and Values RESPONSIBILITIES: Be able to perform welding on various materials at required positions using different welding processes, including, but not limited to, GTAW, SMAW, FCAW, GMAW, and SAW. Lay out, position, fit, and weld various piping and structural components, including pipes, flanges, fittings, valves, piping supports, structural plates, beams, etc., in accordance with the supplied piping/structural fabrication drawings. Set up, troubleshoot, and operate welding machines in accordance with job specifications and welding procedures. Adjust valves, gauges, and flames as needed, and be capable of handling compressed gas and oxygen cylinders safely. Operate air arc gougers, grinders, and other industrial machines, tools, and equipment. Participate in JSAs and all other Safety, Health, and Environmental Processes. Conduct behavior-based safety observations. QUALIFICATIONS: 3 or more years of prior fabrication experience Experience using safe work habits 6G - TGAW/FCAW Candidates will be required to pass a Hands-on Welding Test Why work for PES? PES offers competitive wages, sustainable health benefits, 401K company match, and opportunities for employee development. Sounds like your ideal employer. Apply today! Visit ************* to complete a general application or to review additional openings. PES is an equal opportunity employer.

Job Description Job Title: Pipe Welder - Fabrication Rotational Schedule: 5/2 PES Expectations: A successful candidate will exhibit characteristics that support the following: Safety Awareness Work Ethic Technical Skill Customer Focus Open Communication Implementing Vision and Values RESPONSIBILITIES: Be able to perform welding on various materials at required positions using different welding processes, including, but not limited to, GTAW, SMAW, FCAW, GMAW, and SAW. Lay out, position, fit, and weld various piping and structural components, including pipes, flanges, fittings, valves, piping supports, structural plates, beams, etc., in accordance with the supplied piping/structural fabrication drawings. Set up, troubleshoot, and operate welding machines in accordance with job specifications and welding procedures. Adjust valves, gauges, and flames as needed, and be capable of handling compressed gas and oxygen cylinders safely. Operate air arc gougers, grinders, and other industrial machines, tools, and equipment. Participate in JSAs and all other Safety, Health, and Environmental Processes. Conduct behavior-based safety observations. QUALIFICATIONS: 3 or more years of prior fabrication experience Experience using safe work habits 6G - TGAW/FCAW Candidates will be required to pass a Hands-on Welding Test Why work for PES? PES offers competitive wages, sustainable health benefits, 401K company match, and opportunities for employee development. Sounds like your ideal employer. Apply today! Visit ************* to complete a general application or to review additional openings. PES is an equal opportunity employer.

Welder - Structural This person must be able to join steel components or metal plates using blueprints, work orders, welding procedures or oral instructions through the application of heat or electric arc-welding equipment. Other duties may be assigned. Specific Duties and Responsibilities: * Uses Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc or Shielded Metal Arc welding processes. * Unites pipes from torch to tanks of oxygen and fuel gas and turns valves to release mixture. * Reaching expected temperature, size, and color of flame by burning torch and adjusting flow of gas and air. * Preheats work pieces for the preparation of welding or curving, using torch. * Fills holes or corrects mistakes in lead pieces and makes bulges thin and curves in metal work pieces. * manually apply filler rod to supply weld metal. May clean or degrease weld joint or workplace, using wire brush, portable grinder, or chemical bath. * remove excess weld, defective weld material, slag and spatter, using carbon arc gouge, hand scrapper, grinder or power chipper. * Climbs up ladders or works on scaffolds to take apart textures. * In order to protect the torch chooses place of weld based on type, thickness, area, and expected temperature of metal. * Other duties as assigned. Qualifications Required for this Position: Education - no minimum education requirements. Experience - 2-4 years of Journeyman level experience. * Applicants must be legally authorized to work for ANY employer in the United States. Austin Industrial is unable to sponsor or take over sponsorship of an employment visa for this position. Benefits & Compensation We offer excellent benefits including medical, dental, life and disability insurance, and a matching 401K plan. We are proud to be a 100% Employee-Owned Company (ESOP)! To learn more about our employee-ownership structure, please go to ********************************************************* . Austin Industrial is an Equal Opportunity Employer. See the "Know Your Rights" poster available in English and Spanish. About Austin Industrial Austin Industrial provides premier self-perform maintenance, construction, and soft craft service to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. To learn more about us, visit ************************************************ . No Third-Party Inquiries Please This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so (i.e., payment must be required pursuant to the terms of a written agreement). Any unsolicited resumes or candidate information submitted to this Company or any of its employee-owners becomes the property of the Company. Accessibility Note If you are a job seeker with a disability and require a reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the People Services Team at **************.

Job Description About Company: The Millis Family of Companies was established in 1980 with a commitment to helping clients bring their construction visions to life. Since then, we have expanded our locations and services to better serve the evolving needs of our clients. Our diverse range of companies includes expertise in general contracting, civil construction, commercial landscaping, architectural steel fabrication products, and masonry and fencing. Throughout our growth, we have remained dedicated to providing top-quality construction solutions while eliminating the hassle for our clients. We take pride in offering reliable, professional services that ensure your project is completed with precision and care. Whether you're embarking on a large-scale development or a smaller, specialized project, The Millis Family of Companies is here to turn your construction dreams into reality. About the Role: Our Architectural Steel Fabrication company, Goldline International, located in Pasadena, TX, is looking to add experienced combo/pipe welder/fitters to our fabrication team. The Combo Pipe Welder/Fitter plays a critical role in the construction industry by fabricating, assembling, and installing piping systems that meet stringent safety and quality standards. This position requires a comprehensive understanding of welding techniques and pipe fitting to ensure the structural integrity and functionality of the product. The successful candidate will collaborate closely with project managers, designers, and other tradespeople to interpret blueprints and specifications accurately. Attention to detail and adherence to safety protocols are paramount to prevent defects and ensure compliance with industry regulations. Ultimately, this role contributes significantly to the successful completion of construction projects by delivering quality product with precision at top of mind. Minimum Qualifications: Proven experience as a welder and fitter in the construction industry. Certification in welding (e.g., AWS Certified Welder) or equivalent is highly preferred. Ability to read and interpret technical drawings and blueprints. Knowledge of safety standards and practices related to welding and pipe fitting. Preferred Qualifications: Experience working with various materials such as carbon steel, stainless steel, aluminum and other alloy metals. Familiarity with welding codes and standards such as ASME, API, or ANSI. Strong problem-solving skills and the ability to work independently or as part of a team. Ability to pass a 6G MIG/Flux-Cored welding test. Responsibilities: Read and interpret blueprints, drawings, and specifications to determine layout and welding requirements. Cut, fit, and assemble materials using various welding techniques such as MIG, TIG, and Stick welding. Inspect and test welded joints to ensure compliance with quality standards and safety regulations. Maintain and operate welding and fitting equipment safely and efficiently in the fabrication shop. Collaborate with team members and supervisors to plan and execute fabrication within project timelines. Adhere to all safety policies and procedures to maintain a safe working environment. Document work progress and report any issues or discrepancies to the shop manager and/or project management. Skills: The required skills in welding and fitting are applied daily to fabricate materials to meet project specifications and safety standards. Proficiency in reading blueprints and technical drawings enables accurate interpretation of project requirements and precise execution of tasks. Welding skills such as MIG, TIG, and Stick welding are utilized to join sections securely and efficiently. Knowledge of safety protocols ensures that all work is performed in a manner that protects both the worker and the worksite. Preferred skills, including familiarity with various materials and welding codes, enhance the ability to handle diverse projects and troubleshoot complex issues, contributing to overall project success. Day shift - approx. 6:30am-3:30 or 4pm (the hours may shift slightly, but this will be a first shift position). Minimum of 40hrs a week + overtime opportunity when approved.

Since 1996, RQ Construction, LLC. has been a leading player in Southern California's robust commercial and governmental Design-Build economy. We have a national and international presence spanning coast to coast, including U.S. Naval Base Guantanamo Bay, Cuba and now, Puerto Rico. We offer management of projects throughout the United States, with our field operations' team members who work on location for each of our projects. We specialize in fast-track projects in new commercial construction with a primary focus in the Department of Defense market. Position Summary: We are looking to hire skilled Combination Pipe Welders in the future to join our Mechanical team for ongoing work at King's Bay Naval Base, GA and the surrounding area. All work is to be performed on the military base and is paid the required Davis-Bacon prevailing wage, specific to the base. Applications are being accepted into a candidate pool for this position at this moment in time. Pay: $45.15 - $50.00 per hour Benefits: Medical, Dental, Vision, 401k with Match, 1 week vacation and sick time. Our Combination Welder will be responsible for using hand-welding, flame cutting, hand soldering, or brazing equipment to weld or join metal components. This position will require the ability to pass groove-weld qualification tests in all positions for multiple materials and processes using both Shielded Metal Arc Welding (SMAW) as well as Gas Tungsten Arc Welding (GTAW) as necessary. All work is completed on an active construction site, and in accordance with relevant codes. Work involves technical application of mechanical welding principles. This is all to be done using the appropriate equipment and implementing the required safety practices in support of RQ's Mission, Vision, and Values. EDUCATION & EXPERIENCE A high school diploma or GED is the preferred minimum formal education for this position. Should be supplemented by completion of a Union, private (in-house), military, or trade school apprenticeship program that includes theory and on-the-job 5 to 8 years (or equivalent) field or trade work experience as a Combination Welder in a commercial, or facilities operations setting is required; government, military, or large commercial construction experience Candidates must be able to pass 6G GTAW & SMAW test before being hired. CPR, First Aid, and OSHA 30-hour Certifications required (training can be provided) Specific training or certificates in the following preferred (training can be provided): Trenching and shoring training Fall protection Confined space training Forklift/Manlift training and certificate Power actuated tools training and certificate Lockout/Tagout training Scissor lift/boom lift certificate EM-385 We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, creed, gender (including gender identity and gender expression), religion (all aspects of religious beliefs, observance or practice, including religious dress or grooming practices) marital status, registered domestic partner status, age, national origin or ancestry, physical or mental disability, medical condition (including cancer or a record or history of cancer, and genetic characteristics), sex (including pregnancy, childbirth, breastfeeding or related medical condition), genetic information, sexual orientation, veteran status, or any other basis or status protected by federal, state, or local law or ordinance or regulation. All candidates considered for hire must provide evidence of identity and U.S. work authorization at the time of hire. Additionally, all candidates must successfully pass a drug screening and commercial criminal background check, including a stricter Department of Defense background check, for access to job site at military base (if applicable for position being hired for).

Welder - Structural This person must be able to join steel components or metal plates using blueprints, work orders, welding procedures or oral instructions through the application of heat or electric arc-welding equipment. Other duties may be assigned. Specific Duties and Responsibilities: + Uses Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc or Shielded Metal Arc welding processes. + Unites pipes from torch to tanks of oxygen and fuel gas and turns valves to release mixture. + Reaching expected temperature, size, and color of flame by burning torch and adjusting flow of gas and air. + Preheats work pieces for the preparation of welding or curving, using torch. + Fills holes or corrects mistakes in lead pieces and makes bulges thin and curves in metal work pieces. + manually apply filler rod to supply weld metal. May clean or degrease weld joint or workplace, using wire brush, portable grinder, or chemical bath. + remove excess weld, defective weld material, slag and spatter, using carbon arc gouge, hand scrapper, grinder or power chipper. + Climbs up ladders or works on scaffolds to take apart textures. + In order to protect the torch chooses place of weld based on type, thickness, area, and expected temperature of metal. + Other duties as assigned. Qualifications Required for this Position: **Education** - no minimum education requirements. **Experience** - 2-4 years of Journeyman level experience. + Applicants must be legally authorized to work for ANY employer in the United States. Austin Industrial is unable to sponsor or take over sponsorship of an employment visa for this position. **Benefits & Compensation** We offer excellent benefits including medical, dental, life and disability insurance, and a matching 401K plan. **We are proud to be a 100% Employee-Owned Company (ESOP)!** To learn more about our employee-ownership structure, please go to ********************************************************* . **Austin Industrial is an Equal Opportunity Employer.** _See_ the "Know Your Rights" poster available in English (************************************************************************************** and Spanish (**************************************************************************************** . **About Austin Industrial** Austin Industrial provides premier self-perform maintenance, construction, and soft craft service to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. To learn more about us, visit ************************************************ . **No Third-Party Inquiries Please** This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so ( _i.e._ , payment must be required pursuant to the terms of a written agreement). Any unsolicited resumes or candidate information submitted to this Company or any of its employee-owners becomes the property of the Company. **Accessibility Note** If you are a job seeker with a disability and require a reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the **People Services Team** at ****************.** Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

About Us We are a leading industrial mechanical, electrical, and civil construction services provider for the fossil and nuclear power, pulp and paper, chemical, mining, and general manufacturing industries. We provide a full range of industrial facilities maintenance and process maintenance services. Job Summary About Us: Backed by more than 40 years of experience and one of the industry's leading safety performance records, PPM, helps clients address the complex challenges inherent in today's manufacturing and industrial facilities environment. Our wide experience in meeting industrial plant maintenance needs enables us to implement systems and processes that keep your facilities and equipment running at consistently optimum levels. Job Title: Pipe Welder-- Hopewell, VA Job Summary: The pipe welder will perform welding, lays out, fabricates, assembles, installs and maintenance of piping systems, pipe supports, fixtures, and related hydraulic and pneumatic equipment. Qualifications: Possess the ability to use the English language to communicate (both verbally and in writing) Read and interpret blueprints, mechanical drawings, and hydraulic diagrams Have a complete set of tools appropriate for Industrial pipe fitting/welding Ability to stoop, bend, manipulate tools in small spaces Perform work at heights Ability to frequently lift and/or move varied objects up to 10 pounds and occasionally lift and/or move up to 50 pounds Perform and pass pipe coupon weld test Preferred experience At least 4 years Pipe welding preferably in an industrial setting. Physical Requirements/Job Site Requirements: Must be able to complete hiring paperwork electronically through DocuSign May be required to lift and carry items weighing up to 50 pounds Must posses enough strength and stamina to perform the technical duties and essential functions as identified above Must be able to move in and around confined spaces and uneven areas Must have full range of motion consistent with age Must be able to climb and maintain balance ladders Must be able to adequately hear and respond to voice commands and alerts from other employees, alarms and other job-related noises Visual acuity, depth perception and color discrimination consistent with that required to work at heights and on uneven surfaces Safety/Steel toe shoes are required. Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and is companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.

Turner Industries is a fully diversified industrial contractor. We help move the world forward by providing responsive, innovative solutions designed to increase plant production, reduce costs, reduce downtime, and even prevent shutdowns. Headquartered in Baton Rouge, LA, Turner Industries has over 20,000 employees with offices and job sites across the United States. Our single-solution approach in the petrochemical, refining, energy, pulp and paper, and related industries has made Turner one of the nation's top industrial contractors and earned us the No. 1 spot on ABC's 2024 Top Performers list. People are at the heart of everything we do. Their safety, security, and satisfaction have always been our top priorities. For proof, look no further than our strong working relationships and extraordinary workforce. Turner Industries Group, LLC has an opening for a Pipe Welder to join our Team in the Decatur, AL area. The Pipe Welder will be responsible for lay outs, fits, and welds fabricated, cast, and forged components to assemble structural forms, such as tanks, pressure vessels, furnace shells, pipe, building, and bridge parts. Qualification Standards: ● High school or equivalent ● Minimum four (4) years of experience in specified skill ● Must be able to pass a weld test before being hired ● Must be certified as a welder ● Written pre-employment qualification test ● Post-offer drug/alcohol screen and physical evaluation ● Job site safety requirements as required by the client (clean shaven, long sleeves, steel toe boots, etc.) ● Safety equipment as required by the client (hard hat, safety glasses, gloves, respirator, hearing protection, safety harness with lanyard, etc.) ● Applicant/employee must not pose a direct threat to the health or safety of others in the workplace Functional Requirements: Selects equipment and plans layout, assembly and welding; lays out, positions, aligns and fits components together; bolts, clamps, tack welds parts to secure in position for welding; sets up equipment and welds parts; may assemble parts by bolting and riveting; may weld pipe such as carbon steel, stainless steel, chrome, etc. by process of arc, heliarc, gas, mig, tig, etc.; may weld pipe, sheet metal, structural steel, brackets or other materials; may repair products by dismantling, straightening, reshaping and reassembling parts; may use cutting torch to cut materials and demo existing assemblies. Compensation: Final agreed upon compensation is based upon individual qualifications and experience. Benefits: Depending on your employment status, benefits include health, dental, vision, life, ADD, voluntary life / ADD, disability benefits, leaves of absence, 401k, paid time off, paid holidays, telehealth access, and employee assistance program. Physical Involvement: Employee may be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds structures, etc.; reaching in all directions, handling and manipulating objects and materials; coordinating the movements of eyes, hands and fingers to operate tools and equipment; lifting 30 to 50 pounds from ground level, waist level, and/or overhead; carrying objects, tools, equipment, etc.; standing; sitting; walking; pushing; pulling; bending; kneeling; crouching/squatting; crawling; seeing with or without correction; hearing with or without correction. Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law.

Since its foundation in 1986, Thompson Construction Group, Inc. has grown from a small, local company into one of the largest privately held companies based in South Carolina. Our diverse services portfolio includes capital projects, power services, maintenance services, disaster recovery, hydro consulting and commercial construction. We believe in investing in our employees to help them reach their professional goals, as well as their personal goals. Thompson promotes a work environment that fosters learning, leadership, and development along with a safety culture that never waivers. Thompson is headquartered in Sumter, South Carolina with offices spanning the United States, primarily southeast and central United States. Position Description Lay out, fit, and weld fabricated, cast, and forged components to assemble structural forms. This will be completed in a safe and timely manner with the highest quality possible. Job Responsibilities * Lay out, position, align, and secure parts and assemblies prior to assembly. * Examine work pieces for defects and measure work pieces to ensure conformance with specifications. * Weld together metal components of products such as piping systems, plate, pipe and tube or structural shapes, as specified by layout, blueprints, diagram, work order, welding procedures, or oral instructions, using electric arc-welding equipment. * Obtain specified electrode and insert electrode into portable holder or thread consumable electrode wire through portable welding gun. * Connect cables and adjust welding unit to obtain amperage, voltage, polarity, and pulse, as specified by welding procedure or supervisor. * Start power supply to produce electric current. * Strike (form) arc which generates heat to melt and deposit metal from electrode to work piece and join edges of work piece. * Manually guide electrode or gun along weld-line, maintaining length of arc and speed of movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle. * Weld in flat, horizontal, vertical, or overhead positions. * Examine weld for bead size and other specifications. * May manually apply filler rod to supply weld metal. * May clean or degrease weld joint or workplace, using wire brush, portable grinder, or chemical bath. May repair broken or cracked parts and fill holes. * May prepare broken parts for welding by grooving or scarfing surfaces. * May remove excess weld, defective weld material, slag, and spatter, using carbon arc gouge, hand scraper, grinder or power chipper. * May preheat work piece, using hand torch or heating furnace. * May position and clamp work piece together or assemble then in a jig or fixture. * May tack weld assemblies together. * May cut metal plates or structural shapes. * May fit up parts (pipe, tube, structural shapes, or plate) and inspect fit before welding. * May be required to use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded-Metal Arc welding processes. * Respiratory protection is common and may be required. * Responsible for observing and complying with all safety and project rules. * Other duties as assigned. Job Qualifications * Must be at least 18 years of age. * Must be able to TIG and stick weld on stainless and/or carbon (pipe size and material welded varies per site). * Must pass required weld tests (varies per site). * Must be willing to work outside craft. * Workers are surrounded by hot materials and strong light. * Must wear safety gear, including protective goggles, masks, face shields and safety shoes. * Must be able to read, write and communicate clearly with supervisor/co-workers and understand direction from supervisor. * Utilize basic math and a calculator to solve geometric problems associated with Instrument Fitting. * May be required to work outside and be subject to severe weather as well. * Employee must be able to climb, bend, twist, stand and reach repetitively, operate moving equipment and work in hot/cold/damp/cramped environments. * Candidate may be required to pass a drug test and criminal background check based on job location/requirements. * Required Tool List For Pipe Welder: * Must have own TIG Rig and Stinger * 1 each 12" Crescent Wench * 1 each Stinger (whip) for Stick Welding * 1 each Tig Rig w/Hose and Gauges * 1 each 25' Tape Measure * 1 set Burning Goggles * 1 each Chipping Hammer * 1 set Brushes * 1 pair Welding Gloves * 1 pair Leathers (optional) * 1 each Welding Hood and Lens (Must be attached to hard hat or will attach to hard hat) * *No Soft Cap Hoods * Must be at least 18 years of age * Must be able to lift 50 pounds, climb, bend, twist, stand and reach repetitively. * Work in hot/cold/damp/cramped environments * 40 or more hours per week with possible weekend work * Background check and drug screen based on job location/requirements Benefits * We strive to provide a competitive compensation and benefits package. This includes but is not limited to medical, dental, vision, life insurance, 401(k), wellness programs and career development. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Accessibility: If you need an accommodation as part of the employment process please contact Human Resources at Phone: ************** Email: *********************************** Equal Opportunity Employer, including disabled and veterans. If you want to view the Know Your Rights: Workplace Discrimination is Illegal poster, please choose your language: English - Spanish - Arabic - Chinese English - Spanish - Chinese If you want to view the Pay Transparency Policy Statement, please click the link: English To see other positions, click here.

Job Description Turner Industries is a fully diversified industrial contractor. We help move the world forward by providing responsive, innovative solutions designed to increase plant production, reduce costs, reduce downtime, and even prevent shutdowns. Headquartered in Baton Rouge, LA, Turner Industries has over 20,000 employees with offices and job sites across the United States. Our single-solution approach in the petrochemical, refining, energy, pulp and paper, and related industries has made Turner one of the nation's top industrial contractors and earned us the No. 1 spot on ABC's 2024 Top Performers list. People are at the heart of everything we do. Their safety, security, and satisfaction have always been our top priorities. For proof, look no further than our strong working relationships and extraordinary workforce. We are seeking a Certified Pipe Welder for a position in Hopewell, VA. The Welder position lays out, fits, and welds fabricated, cast, and forged components to assemble structural forms, such as tanks, pressure vessels, furnace shells, pipe and building and bridge parts. Non-exempt role; Reports to the Foreman; Assigned duties according to specific procedures / work is checked frequently. Essential Qualifications: High school or equivalent Minimum four (4) years of experience in specified skill 6G, Stick, TIG, Stainless, Carbon Steel, Chrome Must be able to pass X-Ray and UT Must be a local candidate Must be able to pass a weld test before being hired Must be certified as a welder Written pre-employment qualification test Post-offer drug/alcohol screen and physical evaluation Job site safety requirements as required by the client (clean shaven, long sleeves, steel toe boots, etc.) Safety equipment as required by the client (hard hat, safety glasses, gloves, respirator, hearing protection, safety harness with lanyard, etc.) Applicant/employee must not pose a direct threat to the health or safety of others in the workplace Functional Requirements: Selects equipment and plans layout, assembly, and welding, Lays out, positions, aligns, and fits components together, Bolts, clamps, tacks parts to secure in position for welding, Sets up equipment and welds parts, May assemble parts by bolting and riveting, May weld pipe such as carbon steel, stainless steel, chrome, etc. by process of arc, heliarc, gas, tig, etc., May weld pipe, sheet metal, structural steel, brackets, or other materials, May repair products by dismantling, straightening, reshaping, and reassembling parts, May use cutting torch to cut materials and demo existing assemblies, Perform additional assignments per supervisor's direction. Compensation Final agreed upon compensation is based upon individual qualifications and experience. Benefits Depending on your employment status, benefits include health, dental, vision, life, ADD, voluntary life / ADD, disability benefits, leaves of absence, 401k, paid time off, paid holidays, telehealth access, and employee assistance program. Physical Involvement: Employee may be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds, structures, etc.; reaching in all directions, handling and manipulating objects and materials; coordinating the movement of eyes, hands and fingers to operate tools and equipment; lifting 30-50 lbs. from ground level, waist level, and/or overhead; carrying objects, tools, etc.; standing; sitting; walking; seeing with or without correction; hearing with or without correction; following set procedures and standards; applying basic mathematical skills; planning work; comparing and understanding differences in the size, shape and form of lines, figures and objects; picturing and evaluating solid objects from drawings or diagrams using standards that can be measured or checked; following oral and/or written directions, plans and blueprints; reading; writing; ability to recognize and report safety hazards Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law. Keywords: welding, repair, assembly, hydraulic tools Job Posted by ApplicantPro