Welder (Days/Nights/Weekends) - Entry level pay starting at $21.50/hr + Night/Weekend Shift Differential
Welder job at Twin City Fan Companies
KEY RESPONSIBILITIES
Reads and interprets blueprints and test sheets; gathers and organizes all parts in a logical building order.
Determines appropriate work surface (table, saw horse, floor).
Grinds parts as necessary in preparation for welding and finalizing.
Sets welding gun to correct thickness; operates welding gun and plasma torch to weld and cut necessary holes.
Produces quality welds on a variety of metals (mild steel, aluminum, stainless and galvanized steel), while operating in horizontal, vertical and overhead positions.
Visually inspects work to ensure that all parts are correctly welded to TCF engineering and quality standards (no holes, splatter or incorrect measurements).
Tags product; requests supervisor/team lead inspection of product.
Operates forklift/bridge crane/pallet jack to deliver product to wash or blast booth.
Act, Live, and Behave by TCF Core Values.
Additional duties may be assigned, dependent upon location and product line.
QUALIFICATIONS
High school diploma or GED
12+ months' related experience and/or training (technical school) or equivalent combination of education and experience. Vocational technical school preferred.
Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals written in English.
Basic math skills to include addition, subtraction, multiplication and division in all units of measure including whole numbers, fractions and decimals. Ability to read a tape measure.
Ability to use tools in a safe and proper manner.
Based on department, may be required to operate a forklift, overhead crane, and electric pallet jack.
CERTIFICATIONS, LICENSES, REGISTRATIONS AND REQUIRED TRAINING
The following certifications and training, if required, will be provided by the company:
Forklift Certificate
Bridge Crane Training
Welding Certificate(s) as needed
Fall Protection Training
Compressed Gases Training
PHYSICAL DEMANDS/WORKING CONDITIONS
To successfully perform the essential function of this position, employees must have the ability to:
Continuously lift/move up to 25 pounds; frequently life/move up to 50 pounds; and occasionally pull up to 100 pounds with wheels (pallet jack).
Continuously stand; walk; use hands to finger, handle or feel; reach with hands and arms above shoulder height; stoop, kneel, crouch or crawl; talk; and hear.
Occasionally climb, balance, stoop, kneel, reach with hands and arms at waist level and below the waist, and work in limited space.
Specific vision abilities required include close vision, color vision, distance vision, peripheral vision and depth perception.
WORK ENVIRONMENT
While performing the duties of this position, the employee is continuously exposed to moving mechanical parts and extreme heat. The employee is occasionally exposed to high places, fumes or airborne particles, caustic chemicals and vibration. The noise level in the work environment is usually loud.
SAFETY
Twin City Fan is dedicated to providing a safe and healthy work environment. Each and every employee must understand and continually work within the safety and health rules and policies. The use of good judgment and common sense is critical to workplace safety, and Twin City Fan expects every employee to work in a safe and conscientious manner.
This job description does not constitute a written or implied contract of employment, nor is it an all-inclusive list of responsibilities. Twin City Fan Companies, Ltd. reserves the right to revise or change job duties and responsibilities as business needs arise. Qualifications are representative of minimum levels of knowledge, skills, and experience required.
Welder - January training class
Freeman, SD jobs
Job Description
Who We Are
Vermeer equips customers doing important work around the world. We are global, driven by innovation and growing. The equipment we make manages natural resources, connects people and feeds and fuels communities. We live out a caring culture, we demonstrate agility, we keep a focus on customers and are stewards of our resources. These beliefs drive our culture, determine how we treat others and steer our business.
Work Shift
1st or 2nd shift
Hourly Wage Range
$25.96 - $27.24 + shift differential
Job Summary
Are you passionate about hands-on work and eager to build your skills in a collaborative, innovative environment? As a Welder I at Vermeer, you'll play a vital role in producing high-quality equipment that makes a difference worldwide. You'll develop foundational welding expertise while contributing to our culture of safety, excellence, and continuous improvement.
What You'll Do
1. Complete weldments in various positions according to blueprints and welding procedure specifications, following Vermeer Welding Standards and supporting our commitment to innovation and excellence.
2. Prepare, position, and align components using fixtures; bolt, clamp, and tack weld parts to secure them for final welding, demonstrating our culture of collaboration and continuous improvement.
3. Safely and efficiently operate an oxyfuel cutting (OFC) torch for preheating and perform routine maintenance on welding equipment to ensure optimal performance and safety.
4. Read and interpret blueprints, welding symbols, and work instructions; apply decimal-based measurements to ensure precision and quality.
5. Access digital drawings and work instructions via computer systems to support accurate weld execution.
6. Identify welding defects, assist in root cause analysis, and support corrective actions to maintain product quality and exceed customer expectations.
7. Support 5S and workplace organization goals by maintaining a clean and efficient work area, contributing to continuous improvement and department performance metrics.
What We're Looking For
- Entry-level welding experience or formal training (technical school, apprenticeship, or equivalent) preferred.
- Ability to successfully complete Vermeer's Weld Training Program, including American Welding Society (AWS) Gas Metal Arc Welding - Pulsed (GMAW-P) certification to the D14.0 standard with qualification in the flat (1G-UL) position, and willingness to learn and qualify in Flux-Cored Arc Welding (FCAW) for vertical fillet (3F) and overhead fillet (4F) positions.
- Ability to read blueprints, interpret welding symbols, and apply decimal-based measurements for precision and quality.
- Ability to access and interpret digital work instructions and drawings using computer systems.
- Demonstrated problem-solving skills, including the ability to identify welding defects, participating in root cause analysis, and recommending corrective actions.
- Ability to adapt, assess situations quickly, and carry out appropriate actions to maintain safety, quality, and productivity.
- Strong communication skills to collaborate with team members, supervisors, and other departments.
Travel
- No travel is expected of this position.
Essential Functions
Standing: Frequently
Sitting: Frequently
Walking: Frequently
Hand Coordination: At least average/bilateral
Twisting: Rarely (up to 1 minute in position)
Bending - Trunk: Rarely (up to 1 minute in position)
Bending - Neck: Occasionally (up to 25 degree flex & 30 degree extension for up to 2 minutes)
Elevated Work/Reach: Rarely (up to 1 minute in position)
Squatting/Kneeling: Rarely (up to 1 minute in position)
Climbing: Rarely
Pulling: Rarely (up to 80 lbs) Occasionally (up to 20 lbs) Frequently (up to 10 lbs)
Pushing: Rarely (up to 80 lbs) Occasionally (up to 20 lbs) Frequently (up to 10 lbs)
RH Grip: Rarely (up to 80 lbs) Occasionally (up to 20 lbs) Frequently (up to 10 lbs)
LH Grip: Rarely (up to 80 lbs) Occasionally (up to 20 lbs) Frequently (up to 10 lbs)
RH Pinch: Rarely (up to 15 lbs) Occasionally (up to 5 lbs) Frequently (up to 2 lbs)
LH Pinch: Rarely (up to 15 lbs) Occasionally (up to 5 lbs) Frequently (up to 2 lbs)
Floor to Waist Lift: Rarely (up to 50 lbs) Occasionally (up to 20 lbs)
Horizontal Lift: (up to 50 lbs) Occasionally (up to 20 lbs) Frequently (up to 10 lbs)
Waist to Crown Lift: Rarely (up to 40 lbs) Occasionally (up to 5 lbs)
Work Location
ONSITE: A team member's day-to-day work is best done on a Vermeer campus. If work content can be occasionally completed at an offsite location, discuss potential arrangements with your manager.
Equal Opportunity Employer
At Vermeer Corporation, we believe in the value of your unique identity, background, and experiences. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity, veteran status or any other status protected by the law. Applicants requiring a reasonable accommodation due to a disability at any stage of the employment application process should contact Team Member Solutions at ************** or at **************.
Interested? We'd love to get to know you.
#hc193694
Welder II
Lancaster, MN jobs
Responsible for setting-up and operating Manual Welder to tungsten inert gas (TIG) weld components according to specifications. BENEFITS * Pay based on skill and experience ($25-$34) * Health Insurance plus Dental & Vision coverage * 401K
* Tuition Reimbursement Program
ESSENTIAL DUTIES AND RESPONSIBILITIES
* Operate Manual Welder to TIG weld components safely according to specifications (aluminum).
* Follow weld instructions and complete projects based on blueprints
* Understand and execute verbal instructions from Manufacturing leadership regarding job orders to determine product specifications.
* Perform tack-weld functions to join metal work pieces at specified distances.
* Inspect and record quality requirements of finished work pieces.
* Use all safety devices/tools to ensure safe operation of welding processes.
* Ensure work area is kept clean and organized at all times.
* Knowledge, understanding, and compliance with Company policies and procedures.
* Participate in cross-training throughout manufacturing facility. Dependent upon company need, may be posted in alternate work assignment.
* All other duties as assigned
QUALIFICATIONS:
* High school or General Equivalency Diploma (GED) or technical school diploma or equivalent in relevant work experience preferred
* 5+ years related experience and/or training preferred
* Welding certificate preferred
* Ability to successfully pass weld exams, if necessary
* Proficient in accurate use of micrometers, calipers, and other measuring tools
* Ability to read and work to set tolerances and work from blueprints
* Ability to set-up and operate Welding machine
* Mechanically inclined and possess strong degree of attention to detail
* Basic mathematical skills required to set-up and operate welding process
* Ability to be cross-trained throughout manufacturing facility
* Ability to work in a team fostered environment
* Ability to work overtime and weekends when needed
Location: Lancaster, PA
COMPANY OVERVIEW
Boyd is the world's leading innovator in sustainable engineered material and thermal solutions that make our customers' products better, safer, faster, and more reliable. We develop and combine technologies to solve ambitious performance targets in our customers' most critical applications. By implementing technologies and material science in novel ways to seal, protect, cool, and interface, Boyd has continually redefined the possible and championed customer success for over 90 years.
As a unique provider of innovative solutions, Boyd is in a multitude of industries such as aerospace, medical, consumer electronics and recreational vehicles to name only a few. We partner and serve some of the top organizations around the world. Our diversification and our global reach in the US, Asia and Europe, mean we offer many ways for you to grow and develop your career. We push the limits of your potential and provide you with the tools you need for a successful career.
Boyd Corp is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.
All Job Posting Locations (Location)
Lancaster
Remote Type
On-Site
EEO Statement
Boyd Corp is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.
Welder 2 - 2nd shift Sauk Rapids
Sauk Rapids, MN jobs
NOW HIRING: Millerbernd Manufacturing is looking for a Welder 2 to join our Circular Products team in Sauk Rapids, MN as we are expanding our Sauk Rapids footprint and adding in a 2nd shift. A Welder 2 is responsible for performing MIG welding, layout, tacking, fabrication and building functions in the manufacture of various products in accordance with product specifications. Other combinations of formal training and experience will be considered. Successful completion of internal welding test is mandatory.
Millerbernd Manufacturing Company is an AWS (American Welding Society) Sustaining Company Member.
Job Title: Welder 2
Location: Sauk Rapids, MN
Salary Range: $25.50 - 30.00 per hour (Non-Exempt)
(In compliance with Minnesota Pay Transparency Law, this range reflects the anticipated compensation for this role. Actual pay may vary based on experience, education, and other factors.)
Shift Schedule: 2nd shift Monday - Thursday 3pm - 1am
Shift Differential: 2nd shift - $1.50/hour
As a Welder 2, you will:
Perform the following GMAW welds - butt - V - single bevel and fillet welds on carbon steel
Produce welds that pass visual inspection
Can perform necessary repairs that pass adhere to MMC Welding Procedure Specifications (WPS) and CWI inspection requirements
Demonstrates the ability to weld the above weld joints with either .045 and/or .062 diameter wires
Read and understand Millerbernd's WPS's - select appropriate wire and shielding gas and weld within WPS weld parameters
Proficient in print reading and understands weld symbols and welding gauges
Can perform welds using following wire - solid - flux core and metal core as needed.
Can weld carbon, stainless steel as needed
Perform carbon arc gouging and recognize when any and all defects have been removed
Layout and tack to specifications
Use grinder or other appropriate tools to clean, smooth out, grind or finish parts as needed
Use various machines to fabricate, build, and design products.
Monitor the production board and internal paperwork to perform tasks in the designated sequence
Accurately label all parts for routing to next operation
Performs prescribed preventative maintenance on machines as required
Enter job data in production tracking system
Use crane, hoist, forklift or other material handling equipment to transport materials and product into and out of the work area as required
Must be AWS GMAW certified
Welders employed with Millerbernd will have the opportunity to complete all weld certification requirements including AWS certification within 14 days of employment - up to 3 attempts
Welders employed with Circular Products-Sauk Rapids location are required to obtain and maintain ASME certification requirements
Ensure use of safe work procedures and wear all required PPE
Perform work at the appropriate pace to maintain quality and productivity requirements
Role Qualifications as a Welder 2:
Preferred candidates will have 3 years' experience in metal fabrication/welding experience
Successful completion of internal welding test is mandatory.
Proficient knowledge in interpreting blueprints, mechanical drawings, and weld symbols
Ability to operate hoists, cranes, and other powered industrial vehicles as needed
Ability to operate various power and hand tools
Experience in use of weld positioners, turners, fixtures and equipment
Ability to perform basic shop math functions
Ability to electronically record production information
Ability to read and understand required internal manufacturing paperwork
Ability to work with others as part of a high-performance team
Ability to adapt to changing work priorities
Able to work under limited supervision using standardized practices and/or procedures
Accurately use tape measure and precision measuring instruments
Operational knowledge of Electric Plasma and Acetylene Torch
Proficient in welding techniques on flat, vertical and rotating planes
Why Millerbernd and Who We Are:
We strive to create the best opportunities for our employees. Here you can discover your potential, turn your ideas into reality and become a part of a team with skills and experience in various disciplines. At Millerbernd, you will enjoy a fulfilling and dynamic work environment, exclusive professional development opportunities, exceptional benefits, and competitive compensation.
Comprehensive Benefits Package
At Millerbernd Manufacturing Company, we offer a benefits package designed to support your health, well-being, and financial security.
Health & Wellness
Medical Insurance: Choose from two high-quality plans, including PPO and High Deductible options, with company contributions to HSAs
Prescription Drug, Dental, and Vision Coverage
Health Savings Account (HSA) and Flexible Spending Accounts (FSA) for medical and dependent care expenses
Income Protection
Employer-paid Basic Life and AD&D Insurance
Short-Term and Long-Term Disability Insurance at no cost to employees
Voluntary Benefits
Optional Life and AD&D Insurance, Legal and Identity Protection, Accident Insurance, and Critical Illness Insurance
Retirement Savings
401(k) Plan: Employer matching contributions up to 4%, with immediate vesting
Incentive-Based Compensation
Eligible employees are included in one of our incentive programs, designed to reward performance and align with company profitability and goals. Incentive program eligibility and payout specifics are determined by the role and shift schedule.
Work-Life Balance and Additional Benefits
Paid Time Off (PTO) and Paid Holidays
Tuition Reimbursement: Up to $5,250 annually for job-related education
Employee Assistance Program (EAP): Free and confidential support services
Onsite Training Programs: Skill-building opportunities, including leadership development, welding classes, and language courses
Uniform Subsidy for applicable role
Eligibility: Benefits are available to employees working 30+ hours per week. The 401(k) plan is available to all employees, regardless of hours worked.
Equal Opportunity Employer Statement
Millerbernd Manufacturing Company is an equal opportunity employer committed to fostering an inclusive environment. We encourage candidates from all backgrounds to apply.
Note: We are unable to sponsor employment visas at this time.
The Process:
After you've submitted your application, here is what you can expect to happen next:
Your application will be reviewed by our internal Talent Acquisition Team, not a robot or computer software program.
Once our team has reviewed your application and your skills, qualifications, and experience match what we are looking for, we will reach out to set up a phone interview.
After we've had a chance to chat with you, we will pass your application and our notes on to the hiring manager. From here, the hiring manager will review the information and determine next steps.
Next steps would include an on-site interview and tour of the facility to see what you could be doing here at Millerbernd Manufacturing. From here, the hiring manager would discuss the interview with the Team Lead (if applicable) and determine to move forward or not.
Throughout the process, you will receive communication from our Talent Acquisition Team regarding the status of your application and the next steps if applicable. On average, our hiring process takes 3-10 business days once your application is submitted.
Apply Now if this sounds like you!
Auto-ApplyWelder I
North Sioux City, SD jobs
The Welder is responsible for performing various welding processes, including preparation, assembly, and finishing, to join fabricated metal components according to specifications and instructions. This role requires precision, technical expertise, and a strong commitment to safety and quality.
Welder Essential Duties & Responsibilities
Review and interpret work orders, blueprints, and instructions to determine job requirements.
Plan work procedures, selecting appropriate tools and materials for each project.
Prepare surfaces for welding by cleaning, deburring, and positioning materials.
Set up, assemble, tack-weld, and fully weld components using appropriate techniques.
Cut, burn, and weld various metals to fabricate or repair equipment.
Perform product repairs and modifications as needed.
Maintain welding equipment and tools to ensure proper operation and compliance with safety regulations.
Follow all company safety procedures and maintain a clean, organized workspace.
Perform additional duties as assigned.
Welder Qualifications & Experience
High School Diploma, GED, or equivalent.
Completion of a formal welding program (preferred).
Minimum of 2+ years of welding experience in a manufacturing or fabrication setting.
Ability to read and interpret blueprints and technical drawings.
Experience setting up and adjusting welding equipment for different applications.
Welder Essential Skills & Abilities
Proficiency in various welding techniques (e.g., MIG, TIG, Stick).
Strong understanding of welding setup parameters (e.g., amps, volts, wire speed).
Ability to interpret mechanical drawings and specifications.
Basic welding equipment maintenance knowledge.
Physical ability to lift 50 lbs regularly and perform physically demanding tasks.
Welder Safety & Work Environment
Work requires precision and attention to detail to prevent damage to materials and equipment.
Must follow strict safety protocols to minimize risks of burns, cuts, and exposure to flying debris.
Regular exposure to bright welding arcs requires proper protective equipment.
Work involves frequent bending, stooping, and lifting.
Must maintain a clean and enclosed work area to ensure safety for self and others.
Welder - Nights - No Weekends
Sioux Falls, SD jobs
Welder - Nights - No Weekends!
**$2.00 an hour additional for Night Differential**
Due to growth within our welding department, we are looking for qualified welders to join our Night Shift Weld teams. Our welders report to the manufacturing manager. We are looking for someone who is knowledgeable in reading blueprints, rework instructions, work orders, engineering orders, and someone who can follow written and verbal instructions.
Key Roles
Read blueprints.
Produces high quality products.
Focus on details and demonstrate efficient time management.
Responsibilities:
Communicate effectively with coworkers and management.
Learns all aspects of Diamond Mowers' product line continuously.
Maintains great attendance to ensure manufacturing plans are met and individual accountability.
Ensure proper lifting techniques; including proper hoist usage, asking for assistance, or any other measure to ensure safe lifting techniques are completed.
Keeps a neat and clean work environment.
Wears proper safety gear where/when required, Exp: weld helmet, gloves, shields and steel toed boots.
Strive for an injury free workplace through a “safety first” attitude.
Wear required Personal Protective Equipment (PPE) at all times.
All other duties are performed as necessary.
Qualifications:
1 year of welding experience preferred.
Welding Certification preferred.
Forklift Certification preferred.
Blueprint Knowledge preferred.
Weld symbol knowledge preferred.
Location and Hours:
Address: 1000 Cherokee St
Hours: 4:30pm-3:00am
Days of Shift: Monday -Thursday
A full benefits package is available for all full-time employees.
Exhibit Diamond Company Values:
CUSTOMER FOCUSED
Meeting and exceeding internal and external customer expectations is the responsibility of everyone.
We are committed to being a World Class organization and the greatest partner to our customers.
We will listen, support, engage with empathy, our work must drive the success of our internal and external customers and team members.
ACCOUNTABILITY
We will be responsible for the commitments we make, and the expectations placed on us.
When we fail, we will own it, learn from it and make the appropriate changes.
We will act with exceptional integrity in everything we do.
We will be open to receiving and giving feedback.
TEAM PLAYER
Teamwork and clear communication are paramount to our success.
We will seek and provide constructive feedback to one another, work as a collaborator, treat peers with respect and dignity, engage all team members as partners to solve problems and support one another with a positive attitude.
SAFETY
We believe safety must be at the forefront of all our decision-making.
We will proactively invest in safe solutions and act consciously every day to keep ourselves, team members and customers safe.
GRIT
We have the passion, determination and work ethic that gives us the ability to push through, to get to the end goal and recognize the obstacles we have overcome along the way.
When we tackle a difficult situation, we are determined to never give up and be the best in the industry.
Diamond Mowers is an EEO/AA Employer M/F/Disability/Vet.
Fabrication Welder
Indianola, IA jobs
We are hiring for 3, Level 3 Welders.
Cemen Tech is a drug free workplace.
CONTROL YOUR CAREER | CONTROL YOUR FUTURE | CONTROL YOUR LIFE
Cemen Tech is an employee-owned company who is the global leader in the volumetric concrete mixing industry. We foster a culture of ownership, honesty, and transparency to customers and employees worldwide. We are one unified team working together to change the industry. We take pride in the work that we do and the difference we make. Be that difference. Take back control over your career and own your future.
PURPOSE OF POSITION
Provide a superior customer experience and quality product through the fabrication of large and small steel components.
ESSENTIAL DUTIES AND RESPONSIBILITIES
The following duties are normal for this position. These are not to be construed as exclusive or all inclusive. Other duties may be required and assigned.
More specifically, the person will:
Be familiar with steel fabrication, assembly, and typical shop tools (MIG welder, drill presses, and cutting torches). Be able to read blueprints and understand welding symbols. Experience with MIG/Pulse welding is required. Must be able to weld in all positions during fabrication and repair activities. Be able to properly read and use a tape measure. Must be able to work within a team to complete a project.
Welds using MIG/Pulse processes.
Demonstrated ability to use a sander and grinder.
Demonstrated ability to read blueprints and diagrams and determine critical dimensions and tolerances using measuring tools.
Read and comprehend blueprints, process routings, and schematics for installation of various truck and body components - large and small -onto truck chassis using torch, welder, winches, and hand tools.
Performs re-work as required.
Provide quality and timely workmanship on each work order and maintain daily time standards.
Demonstrated ability to follow established safety and quality procedures.
Team concept, be flexible to move from job to job to support the schedule.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION - EXPERIENCE - COMPUTER SKILLS
High School Diploma/ GED.
Certificate or degree in welding preferred.
Welding knowledge through experience or vocational training.
Ability to pass a preliminary weld test.
1 - 2 years' experience welding, cutting, and/or fabricating metal parts.
Experience in wire feed welding, MIG or TIG welding.
Knowledge of overhead crane and forklift operation.
CORE VALUES - Listed in bold below are Cemen Tech's six Core Values including an example of each Core Value.
Positive Mindset - We know our attitude affects our performance.
Ingenuity - Better, Faster, Easier.
Accountable - We accept responsibility for our actions.
Do the Right Thing - We will stay productive and be contributors.
Engaged - Listening to understand...acting to accomplish.
Safety - We will reinforce safe habits by our own actions.
COMPETENCIES
To perform this position successfully, individual should demonstrate the following work competencies:
Problem Solving - Identifies and resolves issues in a timely manner.
Communication Skills - Speaks clearly, listens and receives clarification, respond to questions.
Dependability - Follows instructions, responds to management direction, and takes responsibility.
Quality Assurance - Demonstrates accuracy and thoroughness.
Ethics/Professionalism - Treats people with respect; Works ethically and with integrity.
Organizational Support - Follows policies and procedures.
Judgment - Exhibits sound and accurate judgment.
Safety and Security - Observes safety and security procedures; Uses equipment properly.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this position, the employee:
Must be able to frequently stoop/bend.
Must be able to regularly use hands and arms.
Must be able to regularly stand and walk.
Must be able to lift and/or move up to 50 pounds.
Must be able to work up to 15 feet off the ground, to work inside of bins on units, to climb ladders on occasion.
Specific vision abilities required by this job include close, distance, color, and peripheral vision.
ENVIRONMENTAL ADAPTABILITY
The noise level in the work environment is usually moderate.
Cemen Tech, Inc. is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, The Employer will provide reasonable accommodations to qualified individuals with disabilities and encourages prospective employees and incumbents to discuss potential accommodations with Cemen Tech, Inc.
BENEFITS
FREE HEALTH INSURANCE
401k
PAID VACATION
ESOP
BONUSES
Apply today to become a part of the Cemen Tech Experience!
We are changing the industry and changing peoples' lives every day. Come be a part of something exceptional.
Cemen Tech, Inc. is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, The Employer will provide reasonable accommodations to qualified individuals with disabilities and encourages prospective employees and incumbents to discuss potential accommodations with Cemen Tech, Inc.
**Only qualified candidates will be contacted to move to the next step of the hiring process. Unfortunately, Cemen Tech will not sponsor applicants for work visas.**
CTI111
Auto-ApplyFabricator Welder - A-Lert Construction Services
Urbana, IA jobs
Company Information A-Lert Construction Services, a division of Centurion Industries, Inc., provides heavy industrial construction, maintenance, fabrication and repair services throughout the U.S. in such diverse processing industries as corn and oilseeds, food, meat, chemical, energy cogeneration and biofuels, wood pulp/paper/fiber products, and more. With over 800 employees and eight offices in six states, A-Lert stands ready to serve the needs of industrial clients throughout the U.S.
At A-Lert, we believe our employees are our greatest business asset, and we work hard to help them develop to be their best, to recognize them for their talents, and to provide opportunities to advance their construction career.
Job Summary
Fabricator responsibilities include reading blue prints, ensuring all parts are available, and confirming that all products are produced in the timeline required. Lays out, fits, and welds fabricated, cast, and forged components to assemble structural forms, such as tanks, pressure vessels, furnace shells, and building parts.
Minimum Qualifications
* Strong work history
* Welding experience is a must
* Physically, workers must minimally be able to:
* See well from a distance and at close range (either naturally or with correction)
* Push, pull, lift, carry, stoop, kneel, crouch, crawl or work at heights as required
* Lift 50+ pounds
* Ability to accurately read and use a tape measure
* Ability to convert decimals
* Ability to read prints, layout, fit, and weld components together
* Able to work overtime
* Ability to use hand tools
* Some equipment set-up and operation may be required
* Accomplish all functions as assigned by management
Other Requirements
* Successfully pass Pre-Employment Drug Screen, Criminal Background, Physical Exam, Customer Security Check, E-Verify, Motor Vehicle Record (if applicable), other assessments (if applicable)
* Attendance - Must be available when scheduled for work
* Must be able to use time effectively and productively
* Must perform quality, accurate, complete, well-organized, concise, analytical and well-articulated work
* Must be able to communicate, understand and follow directions
Pay & Benefits
* Pay commensurate with experience
* Comprehensive Group Medical, Rx, Dental, & Vision Coverage
* Paid Life/AD&D
* Short Term & Long Term Disability
* 401K Retirement Plan with Employer Match
* PTO
* Paid Holidays
* Flexible Healthcare & Dependent Care Pre-Tax Spending Plans
* Years of Service Awards
Accessibility: If you need an accommodation as part of the employment process please contact Human Resources at
Phone: **************
Email: ************************
Centurion Industries, Inc. bases all of its personnel decisions, including recruiting, hiring, training, and promoting, on the basis of individual qualifications and merit, without unlawful regard to race, creed, color, religion, sex, national origin, age, disability, veteran status, or any other basis prohibited by law. We are an Equal Opportunity Employer.
If you want to view the Know Your Rights: Workplace Discrimination is Illegal poster, please choose your language: English - Spanish - Arabic - Chinese
If you want to view the Pay Transparency Policy Statement, please click the link: English - Spanish - Chinese
To see other positions, click here.
Easy ApplyWelder - 2nd Shift
Minneapolis, MN jobs
Electric Machinery Company, a division of WEG Electric Corp.
Minneapolis, MN
Welder - 2nd shift
Team: Fabrication Team
A Welder is responsible for setting up, fabricating and welding complex parts using various welding processes. A Welder works with a high degree of detail adhering to safety and quality standards.
Major Areas of Accountability:
Set up and fabricate a wide variety of components using various welding processes, primarily FCAW and GMAW.
Use oxygen-acetylene, oxygen-natural gas, plasma arc and carbon-arc equipment to heat, straighten, trim and bevel ferrous and non-ferrous material.
Read drawings and routings to determine method, sequence of operation, position, tolerances and welding specifications, to include proper filler materials, fluxes and weld machine settings.
Make all necessary layouts and setups using proper tools and fabricating equipment.
Uses portable electric or air driven grinding or chipping equipment.
Perform self-inspection and documentation of welded components.
Provide feedback on rejected welded components, and may determine disposition of rework for rejection report.
Works in other areas of the Fabrication Team skills matrix, may work in other areas fabricating parts and brazing.
Lift and move materials using forklift, pallet jack, overhead crane or jib crane.
Demonstrates a commitment to Continuous Improvement by identifying opportunities in day to day work.
Performs to ISO 9001 Quality Standards and abides to OSHA and EPA regulations.
Knowledge/Skills/Abilities:
1-2 year welding degree or High School degree with a minimum of 3 years relevant welding experience.
Must pass a FCAW 3G and GMAW-SC 2G weld test.
Knowledge of layouts, ability to read blueprints, perform basic math and calculate conversions.
Ability to be certified in overhead and Jib crane operation and forklift operation.
Salary
Based on experience and qualifications
Pay Types
Voluntary weekend overtime.
Saturday is paid at time and a half, Sundays are paid at double time!
Job Type
Monday Friday, 2nd shift 3:30 p.m. - 12:00 a.m.
Full-time (Union)
Benefits
Medical, Dental & Vision Insurance eligible your 1st day on the job
401K with Match 1st of the month following hire
Quarterly Bonus Program payout potential
Company paid Holidays (13)
Paid Time Off (PTO) accrued
Company paid Short & Long Term Disability
Company paid Life Insurance
Paid Birthday (use anytime throughout the year)
$6,000 annual Tuition Reimbursement program
Company provided tools
Uniforms (laundered), Safety Shoes & Glasses
Secure, onsite free parking
Physical Requirements:
Routinely lifts and moves objects up to 50lbs.
Occasionally ascends/descends ladders and stairs.
Occasionally works at heights or on platforms.
Routinely positions self in various works spaces, including low, tight or confined spaces.
Routinely remains in a stationary position, often standing or sitting for prolonged periods of time.
Routinely uses repetitive motions including the wrists, hands or fingers to operator machinery or tools.
Occasionally moves from one work station to another to accomplish tasks.
Pipewelder - A-Lert Construction Services
Cedar Rapids, IA jobs
Company Information A-Lert Construction Services, a division of Centurion Industries, Inc., provides heavy industrial construction, maintenance, fabrication and repair services throughout the U.S. in such diverse processing industries as corn and oilseeds, food, meat, chemical, energy cogeneration and biofuels, wood pulp/paper/fiber products, and more. With over 800 employees and eight offices in six states, A-Lert stands ready to serve the needs of industrial clients throughout the U.S.
At A-Lert, we believe our employees are our greatest business asset, and we work hard to help them develop to be their best, to recognize them for their talents, and to provide opportunities to advance their construction career.
Job Summary
A-Lert Construction Services in Cedar Rapids, IA is looking for an experienced Pipewelder. Job duties include fabricating, assembling, installing and maintaining piping and piping systems, fixtures, and equipment for steam, hot water, heating, cooling, lubricating, sprinkling, and industrial processing systems. Must have knowledge of system operation and know how to read building plans or working drawings.
Primary Job Duties
* Work within precise standards of accuracy
* Rate information using standards which can be measured or checked
* Compare and see differences in size, shape, and form of lines, figures, and objects
* Look at flat drawings or pictures and understand how they would look as solid objects
* Follow oral and written directions, plans, and bluprints.
* See well (either naturally or with correction)
* Coordinate the movements of eyes, hands and fingers
* Use hands, arms, and fingers fully
* Climb and maintain balance on ladders and scaffolding
* Stoop, kneel, crouch, and crawl
* Work at heights as required
* Lift and carry objects weighing up to 100 pounds
Job Qualifications
* Must be journeyman-level pipewelder (or journeyman training in progress)
* Successfully pass Pre-Employment Drug Screen, Criminal Background, Physical Exam, Customer Security Check, E-Verify, Motor Vehicle Record (if applicable), other assessments (if applicable)
* Attendance - Must be available when scheduled for work
* Must be able to use time effectively and productively
* Must perform quality, accurate, complete, well-organized, concise, analytical and well-articulated work
* Must be able to communicate, understand and follow directions
Pay & Benefits
* Pay commensurate with experience
* Comprehensive Group Medical, Rx, Dental, & Vision Coverage
* Paid Life/AD&D
* Short Term & Long Term Disability
* 401K Retirement Plan with Employer Match
* PTO
* Paid Holidays
* Flexible Healthcare & Dependent Care Pre-Tax Spending Plans
* Years of Service Awards
Accessibility: If you need an accommodation as part of the employment process please contact Human Resources at
Phone: **************
Email: ************************
Centurion Industries, Inc. bases all of its personnel decisions, including recruiting, hiring, training, and promoting, on the basis of individual qualifications and merit, without unlawful regard to race, creed, color, religion, sex, national origin, age, disability, veteran status, or any other basis prohibited by law. We are an Equal Opportunity Employer.
If you want to view the Know Your Rights: Workplace Discrimination is Illegal poster, please choose your language: English - Spanish - Arabic - Chinese
If you want to view the Pay Transparency Policy Statement, please click the link: English - Spanish - Chinese
To see other positions, click here.
Easy ApplyWelder
Saint Paul, MN jobs
Job Description
Join Schwing America - Where Precision Meets Performance
For over 50 years, Schwing America has been a leader in manufacturing top-quality concrete construction equipment. Based in White Bear Lake, MN, we build the machinery that shapes the infrastructure of tomorrow. If you're a skilled welder who takes pride in craftsmanship and quality, we want you on our team.
Position Summary:
As a Welder, you will operate welding equipment and perform position welding with a high degree of proficiency to meet production requirements. This role demands strict adherence to quality standards and safety procedures. You will work closely with production leads to meet daily welding schedules and maintain our reputation for excellence.
Key Responsibilities:
Review daily welding production schedules with Production Lead to understand output goals
Read and interpret blueprints to identify weld locations, components, and layouts
Weld component parts according to prints and product specifications
Perform grinding, deburring, and polishing to produce finished, high-quality welds
Inspect welds regularly to ensure consistency with company quality standards
Repair welds to meet German DIN and AWS D.1.1 standards, including field welding
Report any safety, equipment, tooling, or quality issues immediately to supervision
Operate barcode scanner and computer systems for tracking labor and work instructions
Perform other duties as assigned
Qualifications:
Technical degree in Welding required
Must pass Schwing America welding tests and maintain certification through periodic Quality Control testing
AWS D.1.1 certification required
Excellent problem-solving and troubleshooting skills
Ability to read and interpret blueprints
Comfortable using computers to access work instructions and track labor
Must pass annual Jager Eye examination
Physical Requirements:
Work performed 100% inside the plant facility
Ability to lift up to 50 lbs. as needed
Why Work at Schwing America?
Work with state-of-the-art welding equipment in a clean, modern facility
Join a company committed to quality, safety, and employee development
Competitive wages and comprehensive benefits package
Opportunities for career advancement and skills growth
Apply today to join Schwing America and weld your future with a trusted industry leader.
Welder
Saint Paul, MN jobs
Join Schwing America - Where Precision Meets Performance
For over 50 years, Schwing America has been a leader in manufacturing top-quality concrete construction equipment. Based in White Bear Lake, MN, we build the machinery that shapes the infrastructure of tomorrow. If you're a skilled welder who takes pride in craftsmanship and quality, we want you on our team.
Position Summary:
As a Welder, you will operate welding equipment and perform position welding with a high degree of proficiency to meet production requirements. This role demands strict adherence to quality standards and safety procedures. You will work closely with production leads to meet daily welding schedules and maintain our reputation for excellence.
Key Responsibilities:
Review daily welding production schedules with Production Lead to understand output goals
Read and interpret blueprints to identify weld locations, components, and layouts
Weld component parts according to prints and product specifications
Perform grinding, deburring, and polishing to produce finished, high-quality welds
Inspect welds regularly to ensure consistency with company quality standards
Repair welds to meet German DIN and AWS D.1.1 standards, including field welding
Report any safety, equipment, tooling, or quality issues immediately to supervision
Operate barcode scanner and computer systems for tracking labor and work instructions
Perform other duties as assigned
Qualifications:
Technical degree in Welding required
Must pass Schwing America welding tests and maintain certification through periodic Quality Control testing
AWS D.1.1 certification required
Excellent problem-solving and troubleshooting skills
Ability to read and interpret blueprints
Comfortable using computers to access work instructions and track labor
Must pass annual Jager Eye examination
Physical Requirements:
Work performed 100% inside the plant facility
Ability to lift up to 50 lbs. as needed
Why Work at Schwing America?
Work with state-of-the-art welding equipment in a clean, modern facility
Join a company committed to quality, safety, and employee development
Competitive wages and comprehensive benefits package
Opportunities for career advancement and skills growth
Apply today to join Schwing America and weld your future with a trusted industry leader.
Auto-ApplyWelder Technician, Assoc-Red Oak
Red Oak, IA jobs
At Greenbrier, we do the hard work that matters. The Greenbrier Companies (NYSE:GBX) is powering the movement of products around the world as a leading designer, manufacturer and supplier of freight rail transportation equipment and services.
Greenbrier's heritage of hard work and industrial innovation is celebrated at every level of our organization. We structure our business to support teams that deliver innovative solutions for our customers while positively impacting the world around us.
Greenbrier's success begins with people. We believe in supporting our global workforce through our unwavering attention to Safety, Quality, Respect for People and Customer Satisfaction. Our Inclusion, Diversity, Engagement, Access and Leadership (IDEAL) commitment is rooted in these values, which lead to a culture where employees are engaged and feel good about coming to work every day.
Summary
The Welder Technician, Associate is responsible for all aspects of refurbishing and repairing rail car components. This position ensures that all work is done in compliance with The Association of American Railroads, customer quality control requirements, and all company guidelines and safety rules are followed when performing duties.
Duties and Responsibilities
To perform this job successfully an individual must be able to perform the following essential duties satisfactorily. Other duties may be assigned to address business needs and changing business practices.
Complies with The Association of American Railroads regulations, quality assurance standards, and Greenbrier Rail Services Environmental Health and Safety policies
Performs assigned tasks under the direction of Supervisor and department leader and notifies Supervisor or department leader of materials and/or equipment needed to complete job tasks
Performs required refurbishing and/or repairs to rail car components using welders, grinders, cutting torches, and air arching
Performs minor repairs to tools and equipment to maintain them in good working order
Interacts with Supervisor and team members in a team environment and assists in the training and coaching of new employees when required
Maintains and establishes basic knowledge and fundamentals of The Association of American Railroads repair procedures
Performs set up and operation of metal working tools such as welder, grinder, cutting torches, and other tools related to the work process
Complies with special processes assigned, based on work orders
Qualifications
The following generally describes requirements to successfully perform the assigned duties.
Minimum Qualifications
Ability to prioritize multiple tasks while ensuring attention to detail
Ability to use measuring equipment such as a ruler and other precision measuring equipment.
Ability to work and communicate within a team setting
Ability to use machines and tools that are used for welding, cutting, gouging, inspecting, and testing
Experience with the following welding processes: burning, air arc, and grinding
Valid Driver's License is required for positions in Modesto, CA
Preferred Qualifications
One + years work experience in a manufacturing environment
Work Environment and Physical Requirements
Work Environment
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The physical environment requires the employee to work in hot and cold environments, in and out of the weather, work safely around heavy equipment and on top of and under railcars, as well as around railroad tracks. Employees are required to use personal protective equipment such as steel toe boots, hard hat, hearing protection, safety glasses, welding and grinding shields, etc. or as environmental conditions dictate
Physical Activities and Requirements
Frequency Key
Not Applicable: Activity is not applicable to this occupation
Occasionally: Occupation requires this activity up to 33% of the time (0- 2.5+ hours/day)
Frequently: Occupation requires this activity from 33% - 66% of the time (2.5: 5.5+ hours/day)
Constantly: Occupation requires this activity more than 66% of the time (5.5+ hours/day)
Working Postures
Sit: Occasionally
Stand: Frequently
Walk: Constantly
Bend: Frequently
Kneel/Squat: Frequently
Crawl: Frequently
Climb: Frequently
Reach Forward: Frequently
Reach Upward: Frequently
Handling/Fingering: Frequently
Lift / Carry Requirements
5-10 lbs: Frequently
10-25 lbs: Frequently
25-50 lbs: Frequently
50-75 lbs: Not Applicable
75+ lbs: Not Applicable
Push / Pull Requirements
Up to 10 lbs: Frequently
10-25 lbs: Frequently
25-50 lbs: Frequently
50-75 lbs: Not Applicable
75+ lbs: Not Applicable
EOE including Vet/Disability
Click here for more information: Know Your Rights
Greenbrier makes reasonable accommodations in the application and hiring process for individuals with known disabilities, unless providing accommodation would result in an undue hardship. Any applicant believing that he or she may need reasonable accommodation for any part of the application and hiring process should contact Greenbrier Human Resources at **************** or call us at ************.
-----------------------------------------------------------------
Email communication from The Greenbrier Companies (Greenbrier) will always come from a corporate email address that ends in @gbrx.com or from our applicant tracking system, iCIMS, after you have created a secure account and submitted your application. During the application process, you will create a secure account in our secure applicant tracking site that ends with “-gbrx.icims.com”. In this portal, we will ask you to provide your contact information, past employment history, education history and other job-related information.
Auto-ApplyTank Builder / Welder (Nationwide)
Nashville, TN jobs
Job Description
Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications.
We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems.
Statement of Purpose
To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities.
The PTS difference:
Our people are our #1 priority.
Teamwork is the best way to solve problems.
Safety is critical. Everyone is responsible for creating a safe work environment.
We strive to find new and better ways of doing things every day.
Clear expectations and directions are always given.
Frequent coaching and support lead to great performers and high quality for our customers.
A manager's job is to set each employee up for success every day.
We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together.
We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment.
Day to Day Duties:
Performing arc and torch cutting and gouging.
Using generators, compressors, tuggers, blowers, grinders, and other power and air tools.
Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor).
Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment.
Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment.
Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations.
Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment.
Operating forklifts, man lifts, boom lifts, and other large lifting equipment.
Knowledge of crane operations (including rigging and signaling)
Reading detailed erection and fabrication drawings.
Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks.
Completing job safety analysis, safety audits, site-specific training, and other safety training.
Follow directions and work professionally with other crew members. \
Other duties as assigned.
Requirements
Have great communication and organization skills.
The ability to solve problems and suggest improvements to our systems.
Have excellent attendance and show up to work on time every day.
The willingness to learn.
Be at least 18 years old.
Be able to lift 50 lbs.
Have a high school diploma or equivalent.
Be eligible to work in the United States.
Be willing to authorize background checks.
Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism.
Have a valid driver's license.
Be willing to authorize motor vehicle driving record checks.
Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing.
Ability to weld is a plus.
Benefits:
Competitive Pay with annual reviews
Health, Dental and Vision insurance
401k with company match
Great culture of teamwork, learning and development.
You'll be part of a team where YOU matter
Powered by JazzHR
m4aT6HfUXR
MiG & TiG Welder - Sioux Falls, SD
Sioux Falls, SD jobs
Here at Alcom we believe in our mission, vision, and values.
Mission: To be the most influential partner in the trailer industry.
Vision: To become the market leader in innovative, quality transportation solutions through an unmatched commitment to our employees and customers.
Values:
Customer Focus, Integrity, Problem Solving, Teamwork
The Welder is responsible for performing tasks involved in the production of bases and frames of aluminum trailers. This includes measuring, cutting, and welding of aluminum.
Apply in person - 501 E 52nd St N, Sioux Falls, SD 57104
M-Th 6:00a - 4:30p | Friday Overtime Potential
Heath Insurance
Dental & Vision Insurance
Short-Term & Long-Term Disability
Paid Holidays and Paid Vacation
Paid Life Insurance
401(K) plan with 4% match
FUNCTIONS AND RESPONSIBILITIES:
The Welder is responsible for performing tasks involved in the production of bases and frames of aluminum trailers. This includes measuring, cutting, and welding of aluminum.
Reads and follows blueprints and work orders ensuring a quality product that meets customer demands.
Welds different facets of a trailer, including but not limited to: tacking, clamping, and welding with proper bead size on bases and cages in accordance with the work order; ensures quality of welds for structural integrity.
Obtains raw materials from Material Handlers.
Buffs out rough edges using a hand-held power grinder.
Notifies supervisor of any mechanical or material issues including but not limited to, defects in material, damage to the trailer, and deviations from work order.
Ensures that finished product meets quality expectations. Strives for the highest level of quality and understands the need for continuous improvement; supports the concept of “good enough is never good enough.”
Maintains a clean and safe work area; works to minimize scrap, places unused material back in appropriate area, and disposes of waste appropriately.
Follows all safety procedures, wears appropriate personal protective equipment (PPE), and reports any accidents or near misses to supervisor immediately.
Performs other related duties and assignments as required.
Requirements:
•Must be able to work quickly without sacrificing quality or safety
•Must have a keen understanding of manufacturing processes.
•Must be able to measure and cut accurately
•Must possess the ability to creatively think and solve problems
•Ability to read blueprints and work orders accurately
•Ability to work in a fast- paced environment
•Strong time management and organizational abilities
Alcom USA is proud of its diverse workforce and welcomes employees who speak one or more languages. As a necessity to safely and efficiently perform business operations, employees must be proficient in speaking and understanding English. Alcom will assess the level of fluency required on a job by job basis. Employees must be able to speak and understand English for job related communications and are otherwise welcome to speak their native or other language in the workplace.
EOE
MiG & TiG Welder - Sioux Falls, SD
Sioux Falls, SD jobs
Job Description
Here at Alcom we believe in our mission, vision, and values.
Mission: To be the most influential partner in the trailer industry.
Vision: To become the market leader in innovative, quality transportation solutions through an unmatched commitment to our employees and customers.
Values:
Customer Focus, Integrity, Problem Solving, Teamwork
The Welder is responsible for performing tasks involved in the production of bases and frames of aluminum trailers. This includes measuring, cutting, and welding of aluminum.
Apply in person - 501 E 52nd St N, Sioux Falls, SD 57104
M-Th 6:00a - 4:30p | Friday Overtime Potential
Heath Insurance
Dental & Vision Insurance
Short-Term & Long-Term Disability
Paid Holidays and Paid Vacation
Paid Life Insurance
401(K) plan with 4% match
FUNCTIONS AND RESPONSIBILITIES:
The Welder is responsible for performing tasks involved in the production of bases and frames of aluminum trailers. This includes measuring, cutting, and welding of aluminum.
Reads and follows blueprints and work orders ensuring a quality product that meets customer demands.
Welds different facets of a trailer, including but not limited to: tacking, clamping, and welding with proper bead size on bases and cages in accordance with the work order; ensures quality of welds for structural integrity.
Obtains raw materials from Material Handlers.
Buffs out rough edges using a hand-held power grinder.
Notifies supervisor of any mechanical or material issues including but not limited to, defects in material, damage to the trailer, and deviations from work order.
Ensures that finished product meets quality expectations. Strives for the highest level of quality and understands the need for continuous improvement; supports the concept of “good enough is never good enough.”
Maintains a clean and safe work area; works to minimize scrap, places unused material back in appropriate area, and disposes of waste appropriately.
Follows all safety procedures, wears appropriate personal protective equipment (PPE), and reports any accidents or near misses to supervisor immediately.
Performs other related duties and assignments as required.
Requirements:
•Must be able to work quickly without sacrificing quality or safety
•Must have a keen understanding of manufacturing processes.
•Must be able to measure and cut accurately
•Must possess the ability to creatively think and solve problems
•Ability to read blueprints and work orders accurately
•Ability to work in a fast- paced environment
•Strong time management and organizational abilities
Alcom USA is proud of its diverse workforce and welcomes employees who speak one or more languages. As a necessity to safely and efficiently perform business operations, employees must be proficient in speaking and understanding English. Alcom will assess the level of fluency required on a job by job basis. Employees must be able to speak and understand English for job related communications and are otherwise welcome to speak their native or other language in the workplace.
EOE
Operator 2, Production - Welder
Albert Lea, MN jobs
The Production Operator - Welder role encompasses a progressive hands-on career path within the JPW Industries manufacturing environment, supporting the assembly, fabrication, and quality assurance of machinery, components, and sub-systems. Operators at all levels play a vital role in meeting production targets, ensuring product quality and upholding workplace safety.
ESSENTIAL FUNCTIONS AND RESPONSIBILITIES
Operator 1 - Production
Use hand, power and production tools to assemble machine units, sub-assemblies, and parts to meet product tolerances and specifications
Install moving parts, such as shafts, levers, or bearings
Use measuring instruments to verify alignments and tolerances of moving parts
Install wiring and electrical components to specifications
Remove small quantities of metal using hand files or portable grinders
Pain and install pre-manufactured parts into sub- or final machine assemblies as required
Bend and install pipe for hydraulic systems
Operate forklift to transport raw materials, components, and finished products throughout the production facility.
Read and understand work orders, work instructions, or process documents to accurately and efficiently produce products to specifications
Operate equipment and follow chemical treatment procedures to apply black oxide coating to metal parts, adhering to standard operating procedures and quality control standards.
Maintain production documentation
Perform routine quality checks to ensure products meet specifications
Operator 2 - Production
Satisfactorily performs all responsibilities of an Operator 1 - Production, including:
Perform basic to intermediate welding operations as required to assemble, repair, or modify components during the production process, following blueprints, work instructions and safety guidelines.
Assist in the fabrication and fitting of complex machine subassemblies, ensuring high standards of alignment, tolerance, and functionality
Assemble, install and align mechanical components such as gearboxes, shafts, levers, and bearings
Route and install hydraulic tubing and hoses with precision, following schematics and bend specifications
Perform basic wiring tasks such as routing and terminating wires for motors, sensors, control panels, and electrical components with accuracy and adherence to diagrams and safety standards
Maintain accurate build records and production documentation, including checklists, quality control forms and rework
Operator 3 - Production
Satisfactorily performs all responsibilities of an Operator 2 - Production, including:
Monitor production workflow, identifying and escalating issues related to materials, equipment or workforce production
Support continuous improvement initiatives by identifying inefficiencies, suggesting process improvements, and assisting with implementation.
Lead complex machine builds and custom assembly projects that require advanced troubleshooting, fabrication, or integration of mechanical, electrical, and hydraulic systems.
QUALIFICATIONS AND EXPERIENCE
Demonstrate adaptability and a commitment to continuous learning in response to evolving business needs.
Demonstrates a continuous improvement mindset, consistently seeking ways to enhance quality, efficiency, and processes.
Supportive of team environment and collectively working together towards goals
Effectively and efficiently communicate with others
Operator 1 - Production
High school diploma or equivalency required
0-2 years in manufacturing or mechanical assembly
Ability to use basic hand, power and measuring tools
Ability to follow work instructions and record basic production data
Ability to operate a forklift and basic shop equipment
Operator 2 - Production
Technical or trade school training preferred
2-4 years in manufacturing or mechanical assembly
Proficient in MIG/TIG welding
Strong aptitude for mechanical assembly
Interpret and follow complex work orders
Ability to complete basic electrical wiring
Operator 3 - Production
Post-secondary technical training or certifications preferred
4+ years in manufacturing or mechanical assembly with demonstrated technical proficiency
Advanced mechanical/electrical/hydraulic integration
Lead complex builds
Direct workflow and task prioritization
Able to troubleshoot prototype or custom assemblies
Mentor less experienced team members
REASONABLE ACCOMMODATIONS STATEMENT
To perform this job successfully, an individual must be able to perform each essential function satisfactorily. Reasonable accommodation may be made to enable qualified individuals with disabilities to perform the essential functions.
PHYSICAL DEMANDS AND WORK ENVIRONMENT
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand for long periods; use hands to handle or feel and talk or hear. The employee is frequently required to reach with hands and arms. The employee is occasionally required to walk and stoop, kneel or crouch. The employee may occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Working extended and flexible hours may be requested occasionally.
Auto-ApplyHard Face Welder
Harlan, IA jobs
CPM Holdings, Inc. is a diversified leading global supplier of process equipment and engineered technologies that sustainably feed, fuel, and build a better world. With its growing family of 17 market-leading product brands, CPM serves a variety of industries including animal feed, consumer food, green energy, advanced materials and sustainable packaging. Founded in 1883, CPM has 1,700 employees across 36 facilities on 4 continents with presence in 150+ countries. From the foods you eat to the fuels you require, CPM plays an important role in making the world more efficient and more sustainable.
The CPM Industrial Solutions Division has a unique opportunity for a Hard-Face Welder in our manufacturing facility in Harlan IA. This is an opportunity to join a highly successful business with advancement opportunities. We are looking for a motivated detail-oriented person with strong welding aptitude attention to detail and the ability to work safely and productively with minimal supervision.
This can be an entry level position. We will train motivated candidates that are willing to work hard, show up on time and can learn to work in a fast-paced dynamic environment.
Monday thru Thursday/10 hours per day
1:00 PM-11:00 pm
40 hours per week
Benefits/401Kplan
Quarterly raises
Paid holidays & PTO
Qualifications & Skills:
Must be able to lift 50 pounds
Must be able to work independently with little supervision
Welding experience preferred
Ability to read and understand work instructions
Forklift experience
Attentive to detail
Must be able to document piece count and complete simple quality measurements
CPM Acquisition Corp. is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. CPM Acquisition Corp. offers competitive compensation and benefits, including paid holidays and vacations, 401k, medical/dental insurance, tuition assistance, and more.
Auto-ApplyPipefitter Pipewelder - A-Lert Construction Services
Clara City, MN jobs
Click Apply above for Longform Application or Click Here for Quick Apply Company Information A-Lert Construction Services, a division of Centurion Industries, Inc., provides heavy industrial construction, maintenance, fabrication and repair services throughout the U.S. in such diverse processing industries as corn and oilseeds, food, meat, chemical, energy cogeneration and biofuels, wood pulp/paper/fiber products, and more. With over 800 employees and eight offices in six states, A-Lert stands ready to serve the needs of industrial clients throughout the U.S.
At A-Lert, we believe our employees are our greatest business asset, and we work hard to help them develop to be their best, to recognize them for their talents, and to provide opportunities to advance their construction career.
Job Summary
Lays out, fabricates, assembles, installs and maintains piping and piping systems, fixtures, and equipment for steam, hot water, heating, cooling, lubricating, sprinkling, and industrial processing systems, on basis of knowledge of system operation and study of building plans or working drawings.
Primary Job Duties
* Work within precise standards of accuracy
* Rate information using standards which can be measured or checked
* Compare and see differences in size, shape, and form of lines, figures, and objects
* Look at flat drawings or pictures and understand how they would look as solid objects
* Follow oral and written directions, plans, and blueprints.
* See well (either naturally or with correction)
* Coordinate the movements of eyes, hands and fingers
* Use hands, arms, and fingers fully
* Climb and maintain balance on ladders and scaffolding
* Stoop, kneel, crouch, and crawl
* Work at heights as required
* Lift and carry objects weighing up to 100 pounds
Job Qualifications
* Must be an experienced pipefitter or pipe welder
* Successfully pass Pre-Employment Drug Screen, Criminal Background, Physical Exam, Customer Security Check, E-Verify, Motor Vehicle Record (if applicable), other assessments (if applicable)
* Attendance - Must be available when scheduled for work
* Must be able to use time effectively and productively
* Must perform quality, accurate, complete, well-organized, concise, analytical and well-articulated work
* Must be able to communicate, understand and follow directions
Pay & Benefits
* Pay range is $30-32 per hour
* Per Diem: $125
* Comprehensive Group Medical, Rx, Dental, & Vision Coverage
* Paid Life/AD&D
* Short Term & Long Term Disability
* 401K Retirement Plan with Employer Match
* PTO
* Paid Holidays
* Flexible Healthcare & Dependent Care Pre-Tax Spending Plans
* Years of Service Awards
Accessibility: If you need an accommodation as part of the employment process please contact Human Resources at
Phone: **************
Email: ************************
Centurion Industries, Inc. bases all of its personnel decisions, including recruiting, hiring, training, and promoting, on the basis of individual qualifications and merit, without unlawful regard to race, creed, color, religion, sex, national origin, age, disability, veteran status, or any other basis prohibited by law. We are an Equal Opportunity Employer.
If you want to view the Know Your Rights: Workplace Discrimination is Illegal poster, please choose your language: English - Spanish - Arabic - Chinese
If you want to view the Pay Transparency Policy Statement, please click the link: English - Spanish - Chinese
To see other positions, click here.
Easy ApplyWelder (Days/Nights/Weekends) - Entry level pay starting at $21.50/hr + Night/Weekend Shift Differential
Welder job at Twin City Fan Companies
KEY RESPONSIBILITIES:
Use standard work instructions and blueprints when available
Visually inspect weld quality
Fabricates and assembles metal structures
Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal, or overhead)
Fabricates and assembles metal structures
Perform efficient welding of various metal objects with help of gas torch and welder
Rework and/or repair welded parts and products according to engineering specification changes
Complete run out checks
Fit Wheels and Fans with limited supervision
Maintain weld machines using preventative maintenance methods
Maintains good housekeeping and clean work areas in assigned space
Act, Live, and Behave by TCF Core Values.
Additional duties may be assigned, dependent upon location and product line
Qualifications
Typically requires a high school diploma and up to 2 years of experience
Read and understand shop orders and blueprints, safety rules, standard work instructions.
Ability to read and comprehend all weld symbols
Complete documentation and work in a timely manner
Ability to use hand tools in a safe and proper manner as well as read a tape measure.
Based on department, may be required to operate a forklift, overhead crane, and electric pallet jack.
CERTIFICATIONS, LICENSES, REGISTRATIONS AND REQUIRED TRAINING
The following certifications and training, if required, will be provided by the company:
JSA completion, Forklift Operations, PPE identification and usage, Crane Training, hazard awareness/identification, Lift table operations, Rigging safety
Understands SQDE Metrics, LDMS, Issue boards, 5S
PHYSICAL DEMANDS/WORKING CONDITIONS:
To successfully perform the essential function of this position, employees must have the ability to:
Continuously lift/move 10 pounds; frequently lift/move up to 25 pounds and occasionally lift/move up to 50 pounds.
Continuously stand; walk; bend/stoop, use hands to finger, handle or feel; reach with hands and arms above shoulder height; stoop, kneel, crouch or crawl; talk; and hear.
Occasionally climb, balance, kneel, reach with hands and arms at waist level and below the waist, and work in limited space.
Specific vision abilities required include close vision, color vision, distance vision, peripheral vision, and depth perception.
WORK ENVIRONMENT:
While performing the duties of this position, the employee is continuously exposed to moving mechanical parts and extreme heat. The employee is occasionally exposed to high places, fumes, or airborne particles and/or caustic chemicals. The noise level in the work environment is usually loud.
SAFETY
Twin City Fan is dedicated to providing a safe and healthy work environment. Every employee must understand and continually work within the safety and health rules and policies. The use of good judgment and common sense is critical to workplace safety and Twin City Fan expects every employee to work in a safe and conscientious manner.
This job description does not constitute a written or implied contract of employment, nor is it an all-inclusive list of responsibilities. Twin City Fan Companies, Ltd. reserves the right to revise or change job duties and responsibilities as business needs arise. Qualifications are representative of minimum levels of knowledge, skills, and experience required
.