Engineering Internship jobs at Under Armour - 1638 jobs

Employment Status: Salary Full-Time Function: Research & Development Pay Grade and Range: US10-E-26 (Min $52,300 - Mid $66,700$52,300.00 - $81,100.00) Bonus Plan: Profit SharingProfit Sharing Target Bonus: Hiring Manager: Kyle G Smith Recruiter: Allison Schock Internal Candidate Eligibility Criteria: 1. Is a Lincoln Electric employee with at least 1 year of service 2. Is NOT on an active Performance Improvement Plan (PIP) Primary Function Work as part of Laser Group on the development of laser processing and parameter development in support of LECO products and systems. Work with lasers, optics, motion systems, welding torches, and/or power supplies to conduct process and parameter development. Work with Lincoln Electric Sales Team to develop and deliver laser solutions. Job Duties Perform, instruct and supervise testing of internal R&D efforts. Interact with suppliers, customers, distributors, and sales engineers on a regular basis. Perform other duties assigned by the supervisor. Usually works with minimum supervision, conferring with superior on unusual matters. Demonstrate laser processes for internal and external visitors to Laser Laboratory (EP-5). Travel to assist with installations/runoff at customer facilities. Assignments are broad in nature, requiring originality and ingenuity. Requirements Minimum High School Diploma/GED; Associates or Bachelor's in Engineering, Project Engineering or Engineering Technology preferred Minimum 1 year relevant laser welding experience. Experience with laser processing and/or robotics is desirable Robotic programming experience is desirable Excellent written and verbal communication skills. Ability to read and interpret weld symbols Skill in the use of computers, specifically a PC, Windows-based operating environment Ability to work independently and as part of a team. Willingness to work in a lab environment and perform welds without assistance Ability to handle a constantly changing set of priorities. Willingness to travel 20% of the time. Possesses and applies a broad knowledge of principles, practices and procedures of particular field of specialization to the completion of difficult assignments. Physical Demands and Work Environment: The physical demands and work environment characteristics described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing duties of job, the employee is typically required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; balance; stoop; bend; squat; climb; talk and hear. Be able to climb ladders; lift hand tools approx. 1-15 lbs. in weight to complete machine assembly, parts up to 50 lbs. Repetition with activity. Work environment: The noise level in the work environment is usually low to moderate. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Pay Grade and Range: US10-E-26 (Min - $52,300 $52,300.00 - Mid $66,700) Bonus Plan: Profit Sharing : % Req ID: 27438 Summary Lincoln Electric is growing the Plant Engineering team and has outstanding opportunities for an experienced Electrical Engineering Technologist. Our Plant Engineering team is responsible for implementing capital projects and providing engineering support for the Consumable and Machine divisions of Cleveland Operations. Electrical Engineering Technologists play a crucial role in designing the electrical systems for equipment used in manufacturing welding machines and consumables, ensuring that the production floor equipment adheres to corporate objectives related to safety, health, productivity, quality, and continuous improvement. In addition to competitive pay, Lincoln Electric offers a lucrative profit-sharing plan, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits. What You Will Do As an Electrical Engineering Technologist, you will collaborate in a team environment to design and support industrial electrical systems, which includes various types of equipment new and old. Specific responsibilities include: Modify solutions to improve equipment reliability, safety, ergonomics, and compliance with ISO 14001, ISO 450001, and other EHS initiatives. Provide technical support to Production, Maintenance, and IT departments, reducing downtime and improving system performance. Maintain, modify and update PLC, VFD, and HMI programs using various control automation platforms, including Rockwell, Siemens, and Beijer. Update and support National Instruments LabVIEW code for testing applications and equipment. Interface with engineering, manufacturing, maintenance, IT, MES, and Production teams to support facility projects. Apply NEC knowledge for planning industrial equipment installations and work with electricians to update documentation. Supply project leaders with capital cost estimates and timelines, and review capital equipment quotations. Lead projects or project steps, solve complex problems, and act as a resource for colleagues with less experience. Manage outside engineering and construction personnel, ensuring all safety, health, environmental, and compliance aspects meet regulations. Integrate equipment into data collection systems and establish network topologies. Support network backup, device patching management, and control system asset inventory. Compile data from connected devices for organizational use and develop standards for control systems hardware and software. Identify and assume additional responsibilities for projects and processes that align with and drive towards Lincoln Electric Company's 2025 Higher Standard Goals. Education & Experience Requirements Level II: Minimum of a Bachelor's degree required in Electrical Engineering Technology and 3+ years' experience Level Ill: Minimum of a Bachelor's degree required in Electrical Engineering Technology and 5+ years' experience Level IV: Minimum of a Bachelor's degree required in Electrical Engineering Technology and 8+ years' experience Experience with AutoCAD Electrical CAD software. Experience with PLCs, HMls, VFDs, and test equipment, including Rockwell Automation software, Siemens software, and National Instruments LabVIEW. Knowledge of NFPA 70, 70E, and 79, and other technical codes. Knowledge of basic networking concepts and SQL Database. Skills Demonstrate initiative and accept responsibilities with minimal supervision. Strong ownership and results-driven mindset. Good judgment, self-motivation, and safety consciousness. Excellent organizational skills. Superior written and oral communication abilities. Adaptability to handle diverse assignments and changing priorities. Hands-on work capability and effective collaboration on the shop floor. Critical thinking and exceptional problem-solving skills. Proficiency in supporting and troubleshooting industrial equipment. Flexibility to work off shifts, travel between facilities in Northeast Ohio, and as required. Effective teamwork with employees at all organizational levels. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Req ID: 27850 Position Overview Plant Engineering is the department within Lincoln Electric which is responsible for designing, maintaining, improving, and supporting the equipment, manufacturing processes, and plant-wide infrastructure. Past Plant Engineers have worked to create the operations as we know it today. As a Plant Technologist, you will play a pivotal role in supporting and executing projects across our manufacturing facilities in the Cleveland and Mentor areas. Your focus will be on identifying and solving technical challenges while ensuring that all equipment and processes align with the organization's safety, health, quality, and productivity standards. This role offers an exciting opportunity to contribute to the sustainability and growth of our operations. Job Duties and Responsibilities Collaborate in a team environment to execute capital projects for manufacturing facilities in the Cleveland and Mentor areas. Take responsibility for the mechanical aspects of projects, which may include documentation, equipment installation, project management, and support. Implement engineering solutions to improve equipment reliability and safety, reduce operating and maintenance costs, and effectively manage outage risks. Create and maintain sustainable documentation for use by engineering and maintenance teams. Implement solutions that comply with ISO 14001 and Environmental Health and Safety (EHS) initiatives to enhance environmental and employee health and safety standards. Provide capital cost estimates and establish project timelines to ensure successful completion of project work. Review equipment quotations to confirm compliance with desired specifications. Deliver technical support to the Production and Maintenance departments. Coordinate and interface with engineering, production, maintenance, and supply management teams. Work closely with and often manage outside engineering and construction personnel. Ensure all safety, health, environmental, and compliance requirements adhere to the appropriate regulations. Provide support for various tasks as directed by Plant Engineering managers to ensure efficient operations. Basic Requirements Education / Experience: Bachelor's degree in Engineering Technology (Mechanical) with a minimum of 3 years of experience, OR Bachelor's degree and an associate degree in related fields with 5 years of experience, OR Diploma/GED with 10 years of relevant experience. Strong desire to take ownership of tasks and deliver results. Excellent problem-solving and troubleshooting abilities. Demonstrates good judgment, self-motivation, and a commitment to safety. Proven ability to manage multiple tasks, prioritize work effectively, and meet deadlines. Flexibility to handle diverse assignments and adapt to changing priorities. Ability to perform hands-on work when needed and work collaboratively on the shop floor with employees and processes. Technically proficient in CAD modeling. Preferred systems: Solid Edge; AutoCAD. Willingness to occasionally work off shifts, travel between facilities in Northeast Ohio, and travel as required. Job Rate: Engineering Technologist II to IV Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Do you want to work for a company where the people are the purpose? Grimco is a leading $1.5 billion sign supply distribution company serving the graphics and signage industry. As a family-owned business, we combine the stability and resources of an industry leader with the agility and innovation of an entrepreneurial environment. Job Description We're seeking a Mechanical/Industrial Engineering Intern who wants real-world experience applying Six Sigma methodologies in a manufacturing environment. You'll own process improvement projects from concept to completion, working hands-on in our production facility to drive measurable operational enhancements. What You'll Do Design and execute Design of Experiments (DOE) in manufacturing environments to optimize process parameters and product quality Conduct Big Data Analysis to uncover patterns and insights from production data streams Combine AI with Mechanical and Industrial Engineering tools to develop intelligent automation solutions Execute DMAIC projects to reduce process variation and eliminate manufacturing waste Conduct time studies, process mapping, and statistical analysis to identify improvement opportunities Design and prototype automation solutions for production line efficiency Apply statistical process control techniques to monitor and optimize manufacturing operations Collaborate with production teams to implement Lean manufacturing principles Present data-driven findings and recommendations to facility leadership Qualifications Currently pursuing a degree in Industrial, Mechanical, Manufacturing, or related Engineering field Expected graduation date: 2027 or 2028 Coursework or project experience in Six Sigma, statistical analysis, or process improvement Self-starter who thrives with autonomy and data-driven problem solving Comfortable working in a manufacturing environment with production equipment Familiarity with statistical software, process mapping tools, or quality control methodologies Ready to make your mark? Apply today and join us in driving operational excellence in sign manufacturing! What We Offer Hands-on experience applying Six Sigma tools with immediate impact Mentorship from experienced engineering professionals and certified Black Belts Exposure to diverse manufacturing processes in the sign and graphics industry Competitive internship compensation Potential for full-time opportunities upon graduation Additional Information Grimco is a national wholesale sign supply manufacturer and distributor with over 50 locations across North America. We focus on distributing quality products and providing excellent service to the sign industry. Our offering of sign supplies includes traffic signs, blanks, substrates, boards, digital print media, wrap films, sign vinyl, application tape, banner material and supplies, sign frames, banner stands, LEDs and electrical accessories, grand format solvent/UV/latex printers, inks, software and more. By completing this online application for employment, you certify that the information on this application is true and complete to the best of your knowledge. You understand that any misrepresentation or omission of fact in response to any inquiry made in this application may result in rejection of application or, if hired, dismissal whenever it is discovered. You authorize and release all parties from any liability or damage that may result from seeking, furnishing, or using such information. You understand and agree that, if hired, your employment is for no definite period and may, regardless of the date of payment of compensation, be terminated by Grimco, Inc. at any time, for any or no reason, with or without notice. You understand that no representation to the contrary is valid unless in writing, set a definite term of employment, and signed by the company's CEO. You further understand and agree that any job offer is contingent upon your passing, to the company's satisfaction, a drug and/or alcohol test, criminal background check and other possible screenings. You understand that this application is active for 90 days only, and if you do not hear from the company but still wish to be considered for employment after 90 days, you will need to fill out a new application.

Are you passionate about chemistry and eager to apply your knowledge in a real-world manufacturing environment? We're looking for a Quality Engineering Intern to join our Quality Lab team. In this role, you'll help improve our quality processes through chemical analysis, experimentation, and innovative thinking. This is a great opportunity for someone who enjoys hands-on work, problem-solving, and making a measurable impact. What You'll Do: Assist in analyzing materials and products using chemical testing methods Support the development and refinement of quality control procedures Collaborate with the Quality Engineering team to identify process improvements Conduct experiments and trials to evaluate new materials or process changes Help maintain lab equipment and ensure accurate documentation of results Bring fresh ideas and a chemistry-based perspective to ongoing quality initiatives Participate in cross-functional meetings and contribute to continuous improvement efforts Requirements Currently pursuing a degree in Chemistry, Chemical Engineering, or a related field Strong foundation in chemical principles and lab techniques Analytical mindset with attention to detail Excellent communication and collaboration skills Ability to work independently and as part of a team Curiosity and creativity in applying chemistry to solve real-world problems Why Join Us? Gain hands-on experience in a professional quality lab Apply your chemistry knowledge to improve real manufacturing processes Work alongside experienced engineers and quality professionals Be part of a company that values innovation, learning, and continuous improvement BENEFITS: • 1 hour of PTO per 40 hours worked • On-Demand Pay - Access your earned pay prior to payday • Additional Employee Perks such as fitness club reimbursement, retail discounts, company apparel, special employee events and meals, and more Recognized as one of the fastest growing furniture and cabinet manufacturers in the United States, Stevens Industries, Inc. is a world-class manufacturer of wood and laminated products. We're dedicated to innovation, technological advancement, and beauty in functionality. Founded in 1956 and 100% employee owned, we credit our achievements to a focused path and our talented, passionate employee owners. Stevens Industries, Inc. and Tot Mate Central is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex, origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. Salary Description $16-$18 per hour

We're looking for a detail-oriented and driven Engineering Intern to join our cabinet production engineering team. This internship offers hands-on experience in programming, CAD design, process documentation, and data validation-all while contributing to real-world projects that impact production efficiency and product quality. If you're passionate about manufacturing, eager to learn, and ready to make a difference, we'd love to have you on board. Key Responsibilities Develop and test programs for machines used in cabinet manufacturing Assist in troubleshooting and validating engineering drawings, product designs, and software programs Create and maintain SOPs, process flowcharts, and documentation for departmental workflows Design and update 2D and 3D CAD blocks, including hardware components Review and correct bill-of-materials (BOMs) and resolve material inconsistencies in engineering software Evaluate and verify the output of a new AI system designed to enhance production efficiency Perform entry-level engineering tasks and write formulas within the Microvellum engineering platform Conduct data entry and support data integrity across multiple software systems Major Projects You'll Tackle Update and optimize CAD drawings; research more efficient methods for CAD updates Research and recommend improved hardware components for cabinet production Review product lines for inconsistencies and deficiencies using Excel Validate hardware functionality and ensure compatibility with product designs Write machine programs to support material processing Analyze product line variations and recommend improvements Requirements Currently pursuing or recently completed a degree in Mechanical, Industrial, or Manufacturing Engineering (or related field) Familiarity with CAD software (AutoCAD, SolidWorks, or similar) Basic understanding of manufacturing processes and engineering documentation Strong analytical and problem-solving skills Detail-oriented with excellent organizational abilities Experience with Microvellum or similar engineering software is a plus Comfortable working with data and performing quality checks BENEFITS: • On-Demand Pay - Access your earned pay prior to payday • PTO- 1 hour for every 40 worked • Additional Employee Perks such as fitness club reimbursement, retail discounts, company apparel, special employee events and meals, and more Recognized as one of the fastest growing furniture and cabinet manufacturers in the United States, Stevens Industries, Inc. is a world-class manufacturer of wood and laminated products. We're dedicated to innovation, technological advancement, and beauty in functionality. Founded in 1956 and 100% employee owned, we credit our achievements to a focused path and our talented, passionate employee owners. Stevens Industries, Inc. and Tot Mate Central is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex, origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. Salary Description $16-$18 per hour

We're looking for a hands-on, curious, and driven Manufacturing Engineer Intern to join our team! This internship offers a unique opportunity to gain real-world experience by working both in an office setting and directly on the production floor. You'll play a key role in identifying inefficiencies, improving processes, and supporting continuous improvement initiatives that drive productivity and quality. What You'll Do: Collaborate with engineers and production staff to analyze current manufacturing processes Identify opportunities for process improvements and assist in implementing solutions Collect and analyze data to support efficiency and workflow enhancements Assist in the design and layout of workstations, tools, and equipment Document standard operating procedures and best practices Support ongoing lean manufacturing and continuous improvement projects Participate in cross-functional team meetings and contribute ideas Requirements Currently pursuing a degree in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, or a related field Strong analytical and problem-solving skills Comfortable working in both office and production environments Excellent communication and teamwork abilities Proficiency in Microsoft Office; experience with CAD or data analysis tools is a plus Eagerness to learn and contribute in a fast-paced, hands-on environment Why Join Us? Gain valuable, real-world engineering experience Work on meaningful projects that make a tangible impact Learn from experienced professionals in both engineering and manufacturing Be part of a supportive and innovative team BENEFITS: • 1 hour of PTO per 40 hours worked • On-Demand Pay - Access your earned pay prior to payday • Additional Employee Perks such as fitness club reimbursement, retail discounts, company apparel, special employee events and meals, and more Recognized as one of the fastest growing furniture and cabinet manufacturers in the United States, Stevens Industries, Inc. is a world-class manufacturer of wood and laminated products. We're dedicated to innovation, technological advancement, and beauty in functionality. Founded in 1956 and 100% employee owned, we credit our achievements to a focused path and our talented, passionate employee owners. Stevens Industries, Inc. and Tot Mate Central is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex, origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. Salary Description $16-$18 per hour

We are seeking a detail-oriented and motivated CAD Engineering Technician Intern to join our Millwork Solutions Engineering team. This internship offers hands-on experience in drafting and modeling custom millwork components using industry-standard tools like Microvellum and Autodesk Inventor. You'll work closely with experienced engineers and designers to support the creation of precise 3D CAD models and technical documentation for production. KEY RESPONSIBILITIES: Create and modify detailed 3D CAD models and 2D drawings using Microvellum and Inventor. Assist in the development of custom millwork designs and engineering solutions. Interpret architectural and engineering drawings to produce accurate shop drawings. Collaborate with engineers and production teams to ensure design intent and manufacturability. Maintain drawing standards and file organization within the engineering database. Support the documentation of design processes and best practices. Requirements Currently pursuing or recently completed a degree or certification in Drafting, CAD Technology, Mechanical Engineering Technology, or a related field. Proficiency in Autodesk Inventor and familiarity with Microvellum or similar woodworking/CAD software. Strong attention to detail and ability to follow technical specifications. Basic understanding of millwork or cabinetry manufacturing is a plus. Excellent communication and organizational skills. BENEFITS: • 1 hour of PTO per 40 hours worked • On-Demand Pay - Access your earned pay prior to payday • Additional Employee Perks such as fitness club reimbursement, retail discounts, company apparel, special employee events and meals, and more Recognized as one of the fastest growing furniture and cabinet manufacturers in the United States, Stevens Industries, Inc. is a world-class manufacturer of wood and laminated products. We're dedicated to innovation, technological advancement, and beauty in functionality. Founded in 1956 and 100% employee owned, we credit our achievements to a focused path and our talented, passionate employee owners. Stevens Industries, Inc. and Tot Mate Central is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex, origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. Salary Description $16-$18 per hour

Job Description ENVIRONMENTAL PLANNER INTERN Summer Paid Internship (2026) Westervelt Ecological Services In person- Sacramento, California About us: Westervelt Ecological Services (Westervelt) specializes in the restoration and conservation of wetlands, streams, and endangered species habitats. We develop conservation and mitigation projects that offset environmental impacts from private and public development and infrastructure projects. Our teams work closely with landowners, businesses, government agencies, and land trusts throughout the state of California. Our mission is to provide enduring ecological solutions for the benefit of our partners and the lands we conserve. Position Overview: Westervelt is seeking a highly motivated intern to support our Entitlement and Ecology teams in the development of mitigation projects. This is an excellent opportunity for students interested in environmental planning, ecology, and conservation to gain hands-on experience in a collaborative, professional setting. The ideal candidate is accountable, detail-oriented, and organized; skilled in writing and interpersonal communication; proficient with computers and comfortable working outdoors; and is able to work effectively in a team environment. What You'll Learn and Do: As an intern, you will work alongside experienced environmental planners, habitat designers, ecologists, land managers, and GIS analysts. You will gain exposure to technical reports and CEQA documentation; local, state, and federal permitting processes; regional conservation programs; wildlife and plant ecology; habitat construction and compliance; and GIS methods and tools. You will also have an opportunity to visit existing and proposed mitigation sites, conduct biological surveys, and attend project meetings to better understand the planning, implementation, and long-term stewardship of our mitigation projects. Responsibilities: Interpret and record data Conduct research and analysis Contribute to environmental documents and permitting processes Perform field surveys and monitoring tasks on Westervelt properties Work under supervision of a project manager or senior team member Position Details: This position is expected to be a part-time to full-time summer internship based on project needs and availability. The position is primarily onsite in Sacramento with some flexibility for remote work. Pay is $22/hour. Qualifications: Applicants must be enrolled in an Environmental Planning, Ecology, Environmental Studies, Biological Sciences, or related program at an accredited college.

**TEAM UP WITH US!** The Engine Field Service Trainee is responsible for assisting the Senior Field Service Technician for performing certain repairs and maintenance. **DO YOU HAVE WHAT IT TAKES?** **WHAT YOU'LL DO:** + Assist a Senior Field Technician in completing assigned jobs and task to meet flat rate times and re-do metric. + Assist a Senior Field Technician in completing related paperwork and access databases required to complete job (work order, parts orders, JSA, DBS, SIMS, SIS web, STW) accurately and timely. + Follow contamination control and HAZMAT rules and regulations + Remove and install parts, disassemble and assemble components, and test and adjust assemblies with supervision from a Senior Field Technician + Assist a Senior Field Technician in providing accurate quotes and pricing estimates to the customer. + With guidance from a Senior Field Service Technician the trainee will be required and expected to familiarize him or herself with the following: Correct service report writing, DOT reports, and time entry and expense charges. + Trainee will be required to ride along and assist a Senior Field Service Technician with all aspects of the task at hand daily. + Trainee will be under direct mentorship of a Senior Field Service Technician that he or she is assigned to. **WHAT YOU'LL NEED:** + High school diploma or general education degree (GED); or - 1+ years of related experience and/or training; or equivalent combination of education and experience. + Associate's degree/certificate in diesel technology, or similar mechanical discipline, preferred. + Clean driving record and CDL for field assignment, must be at least 21 at time of applying in order to be assigned and operate field vehicle. + General knowledge of diesel or gas engines, electrical, electronic, hydraulic, mechanical, pneumatic systems and components. + General knowledge of basic hand tools, air tools, precision measuring tools and instruments, lap tops, diagnostic software and cranes and rigging equipment. + May require MSHA certification Education and/or Experience. + Successfully complete Work Steps assessment. + Flexibility to work various schedules including shift work - Be expected to work same schedule or shift as Senior Field Service Technician assigned to - Will be required at times to work away from home and stay out of town overnight. - At times overtime may be required to meet work and deadline requirements. **WHY WORK WITH US?** + We like to take care of business and have fun doing it! + We offer health, dental, vision, life, and more as a comprehensive benefits package. + Don't you want to work with awesome people? **IMPORTANT INFORMATION:** Applicant must pass administered Can Test and Bennett Mechanical Comprehension Test Prior to acceptance for this position. Once applicant is accepted for this position the following will be required monthly. A monthly written evaluation will be administered by the Engine Field Service Supervisor or Field Service Dispatcher on the Trainees performance that month. Once the written evaluation is complete the Trainee and Field Service Supervisor will sit down and go over that month's evaluation. Once this phase is complete a determination will be made by the Supervisor based on evaluation results to continue the program or place the trainee on a 30-day probation period. In the advent at the end of the 30-day probation period there is no improvement the trainee can be terminated or reassigned at the discretion of the Engine Field Service Supervisor and Regional Manager. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. The employee is frequently required to climb or balance. The employee is occasionally required to sit or smell. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts and toxic or caustic chemicals. The employee is frequently exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; extreme cold and extreme heat. The employee is occasionally exposed to risk of electrical shock and vibration. The noise level in the work environment is usually moderate. Required travel up to 40%. This position is considered a safety sensitive position. The Job description is subject to change by the employer as the needs of the employer and requirements of the job change. EEO/AA Keywords: mechanic, heavy equipment mechanic Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

BASIC FUNCTION:The Trainee Engineer in the Rotational Development Program is an entry-level engineering professional participating in a structured program designed to develop broad technical and operational expertise across multiple key functions within the organization.RESPONSIBILITIES:Over the course of the program, the engineer will rotate through four core domains:Process Engineering Gain hands-on experience in optimizing manufacturing processes, improving product quality, and implementing continuous improvement initiatives. Develop process flow sheets for new and existing operation Support equipment design for new plant installations, collaborating with project and mechanical engineering teams to define specifications and layout Analyze and optimize production processes to improve efficiency, quality, and sustainability. Support troubleshooting and root cause analysis for process deviations. Engineering Project Management Participate in the planning, execution, and delivery of capital and technical projects, learning how to manage timelines, budgets, and cross-functional teams. Assist in planning, budgeting, and executing engineering projects and related deliverables. Coordinate with cross-functional teams to ensure timely delivery of project milestones. Track project progress and prepare status reports for stakeholders. Plant Production Operations Work directly with production teams to understand day-to-day operations, troubleshoot issues, and contribute to performance and efficiency improvements. Participate in daily production activities to understand operational workflows. Monitor KPIs such as throughput, yield, and downtime, and propose corrective actions. Ensure compliance with safety, quality, and environmental standards. Early Project Phase Development Collaborate with R&D and innovation teams to support feasibility studies, pilot trials, and the development of new technologies or products. Collaborate with R&D and innovation teams to support feasibility studies and pilot trials. Contribute to the design and scale-up of new processes or products. Document learnings and provide feedback to improve early-phase methodologies. Cross-Rotation Responsibilities Engage in regular feedback sessions with mentors and program coordinators. Demonstrate adaptability and initiative in diverse technical environments. Other duties as assigned. QUALIFICATIONS: Bachelor's Degree in Chemical Engineering, Mechanical Engineering, Industrial Engineering, or a related technical field. Master's degree desired. Prior experience through internships, co-op programs, or academic projects in one or more of the following areas: Process design and optimization Equipment specification or layout planning Manufacturing or plant operations Engineering project coordination or CAPEX initiatives Early-phase product or process development Knowledge and skills: Familiarity with process flow diagrams (PFDs), piping and instrumentation diagrams (P&IDs), and basic equipment design principles. Exposure to engineering software tools (e.g., AutoCAD, Aspen Plus, SolidWorks, MS Project). Strong analytical and problem-solving capabilities. Adaptability and curiosity to learn across diverse technical domains. Effective communication and collaboration in cross-functional teams. Willingness to relocate or travel across sites during the rotation period.Must possess current US employment authorization; sponsorship not available for this position. EOE

Where you will work This opportunity will be based onsite at one of our 3 mills, which includes Augusta, GA, Cypress Bend, AR or Lewiston, ID. The Augusta mill sits along the Savannah River, on the state border between Georgia and South Carolina and manufactures light, medium, and heavy weight coated paperboard. It is a well-invested SBS paperboard manufacturing facility with approximately 600 thousand tons of capacity. This facility boasts over 700 employees and has been in operation for almost 65 years. The Cypress Bend facility is located in the historic Mississippi River Delta and produces bleached paperboard and bleached Kraft pulp, used in the production of folding cartons, commercial print paperboard, carded packaging, and cupstock. This facility boasts over 300 talented employees and stretches across 730 acres. Clearwater Paper employees are proud to manufacture a high-quality product for an essential industry. The Lewiston mill is the original Clearwater Paper manufacturing facility, producing paperboard product, and boasting over 700 talented employees. Approximately two hours away from Clearwater Paper's headquarters in Spokane, Washington, the Lewiston paper mill is a key component in Clearwater Paper's business strategy. What you will do As an intern at Clearwater Paper, you will have the exciting opportunity to work on value-adding projects and gain a general knowledge of manufacturing. Engineering Interns will work under the supervision of our Department Managers to develop, implement, and maintain our systems to meet business objectives and goals. You will be immersed in strategic projects to bring value to our business and gain knowledge of our manufacturing process. We provide intentional coaching and mentorship to support you during your time with us and help you learn all areas of the business. We value diversity through collaborative teamwork and sharing experiences. Combining training and hands-on experience, you will leave the internship with invaluable skills and industry knowledge. This will be a great addition to your resume and will give you professional experience to supplement your college education! Partner with Clearwater Paper engineers to learn the paper-making process from creation to distribution Identify areas of improvement through strategic projects Collaborate with others including cross-functional leaders and team members What you will need To be successful in this position, we are looking for candidates with the following: High attention to detail with strong organizational, troubleshooting, and analytical skills Effective oral and written communication skills, leadership experience, and self-motivation Majoring in Chemical, Electrical, or Mechanical Engineering with a 3.0+ overall GPA Clearwater Paper will not offer sponsorship for employment-based visa status (including, but not limited to, H-1B visa status and other employment-based nonimmigrant visas) for this position. Accordingly, all applicants must be currently authorized to work in the United States on a full-time basis and must not require Clearwater Paper's sponsorship to continue to work legally in the United States. This role will be open for a minimum of 2 weeks or at the point a successful candidate is selected.

Where you will work This opportunity will be based onsite at one of our 3 mills, which includes Augusta, GA, Cypress Bend, AR or Lewiston, ID. The Augusta mill sits along the Savannah River, on the state border between Georgia and South Carolina and manufactures light, medium, and heavy weight coated paperboard. It is a well-invested SBS paperboard manufacturing facility with approximately 600 thousand tons of capacity. This facility boasts over 700 employees and has been in operation for almost 65 years. The Cypress Bend facility is located in the historic Mississippi River Delta and produces bleached paperboard and bleached Kraft pulp, used in the production of folding cartons, commercial print paperboard, carded packaging, and cupstock. This facility boasts over 300 talented employees and stretches across 730 acres. Clearwater Paper employees are proud to manufacture a high-quality product for an essential industry. The Lewiston mill is the original Clearwater Paper manufacturing facility, producing paperboard product, and boasting over 700 talented employees. Approximately two hours away from Clearwater Paper's headquarters in Spokane, Washington, the Lewiston paper mill is a key component in Clearwater Paper's business strategy. What you will do As an intern at Clearwater Paper, you will have the exciting opportunity to work on value-adding projects and gain a general knowledge of manufacturing. Engineering Interns will work under the supervision of our Department Managers to develop, implement, and maintain our systems to meet business objectives and goals. You will be immersed in strategic projects to bring value to our business and gain knowledge of our manufacturing process. We provide intentional coaching and mentorship to support you during your time with us and help you learn all areas of the business. We value diversity through collaborative teamwork and sharing experiences. Combining training and hands-on experience, you will leave the internship with invaluable skills and industry knowledge. This will be a great addition to your resume and will give you professional experience to supplement your college education! * Partner with Clearwater Paper engineers to learn the paper-making process from creation to distribution * Identify areas of improvement through strategic projects * Collaborate with others including cross-functional leaders and team members What you will need To be successful in this position, we are looking for candidates with the following: * High attention to detail with strong organizational, troubleshooting, and analytical skills * Effective oral and written communication skills, leadership experience, and self-motivation * Majoring in Chemical, Electrical, or Mechanical Engineering with a 3.0+ overall GPA Clearwater Paper will not offer sponsorship for employment-based visa status (including, but not limited to, H-1B visa status and other employment-based nonimmigrant visas) for this position. Accordingly, all applicants must be currently authorized to work in the United States on a full-time basis and must not require Clearwater Paper's sponsorship to continue to work legally in the United States. This role will be open for a minimum of 2 weeks or at the point a successful candidate is selected.

Where you will work This opportunity will be based onsite at one of our 3 mills, which includes Augusta, GA, Cypress Bend, AR or Lewiston, ID. The Augusta mill sits along the Savannah River, on the state border between Georgia and South Carolina and manufactures light, medium, and heavy weight coated paperboard. It is a well-invested SBS paperboard manufacturing facility with approximately 600 thousand tons of capacity. This facility boasts over 700 employees and has been in operation for almost 65 years. The Cypress Bend facility is located in the historic Mississippi River Delta and produces bleached paperboard and bleached Kraft pulp, used in the production of folding cartons, commercial print paperboard, carded packaging, and cupstock. This facility boasts over 300 talented employees and stretches across 730 acres. Clearwater Paper employees are proud to manufacture a high-quality product for an essential industry. The Lewiston mill is the original Clearwater Paper manufacturing facility, producing paperboard product, and boasting over 700 talented employees. Approximately two hours away from Clearwater Paper's headquarters in Spokane, Washington, the Lewiston paper mill is a key component in Clearwater Paper's business strategy. What you will do As an intern at Clearwater Paper, you will have the exciting opportunity to work on value-adding projects and gain a general knowledge of manufacturing. Engineering Interns will work under the supervision of our Department Managers to develop, implement, and maintain our systems to meet business objectives and goals. You will be immersed in strategic projects to bring value to our business and gain knowledge of our manufacturing process. We provide intentional coaching and mentorship to support you during your time with us and help you learn all areas of the business. We value diversity through collaborative teamwork and sharing experiences. Combining training and hands-on experience, you will leave the internship with invaluable skills and industry knowledge. This will be a great addition to your resume and will give you professional experience to supplement your college education! * Partner with Clearwater Paper engineers to learn the paper-making process from creation to distribution * Identify areas of improvement through strategic projects * Collaborate with others including cross-functional leaders and team members What you will need To be successful in this position, we are looking for candidates with the following: * High attention to detail with strong organizational, troubleshooting, and analytical skills * Effective oral and written communication skills, leadership experience, and self-motivation * Majoring in Chemical, Electrical, or Mechanical Engineering with a 3.0+ overall GPA Clearwater Paper will not offer sponsorship for employment-based visa status (including, but not limited to, H-1B visa status and other employment-based nonimmigrant visas) for this position. Accordingly, all applicants must be currently authorized to work in the United States on a full-time basis and must not require Clearwater Paper's sponsorship to continue to work legally in the United States. This role will be open for a minimum of 2 weeks or at the point a successful candidate is selected.

INTERNSHIP OPPORTUNITY Job Title: Environmental Scientist Intern Reports To: Environmental Manager An Environmental Scientist Intern assists the Environmental Team with environmental compliance activities. Corporate housing in Carlsbad, NM will be provided for the Intrepid internship program. JOB DUTIES Assist with a variety of environmental tasks, including: air and water quality monitoring, site based environmental compliance inspections, proper control/disposal of hazardous materials, data organization and interpretation, etc. Maintain various records related to permit requirements Observe all safety and company rules Perform other duties as assigned REQUIRED QUALIFICATIONS Valid Driver's License High school diploma or GED Actively pursuing a degree in Environmental Science or related field One to two years related experience or training preferred Ability to be comfortable in both surface and underground industrial operations (ex: going underground, climbing stairs on surface, etc.) Knowledge of MSHA and/or OSHA regulations is a plus Excellent written and verbal communications required Proficient with Microsoft Office Suite PC software SCHEDULE AND WORK ENVIRONMENT 9/80 schedule, Monday - Thursday, 9-hour workdays, Fridays worked, 8-hour workday, with every other Friday off. Schedule subject to change. Combination of outdoors, in a non-temperature controlled environment, and subject to weather conditions, and in an indoor, temperature-controlled office environment Exposed to loud sounds and distracting noise levels Employees are required to wear safety attire and personal protective equipment (PPE) at all times PHYSICAL REQUIREMENTS Standing, walking, using hands, reaching with hands, climbing and stooping up to 2/3 of the time Must be able to lift up to 50 lbs. - lifting will be required up to 2/3 of the time Must be able to climb and descend vertical ladders and stairs The environment may consist of moving mechanical parts and high/precarious places Must be able to perceive color differences Will be required to wear personal protective equipment as needed A pre-placement physical and hair follicle drug test will be required for anyone selected for this opportunity. Placement into the position will not be made until the results are received and cleared by Intrepid. ABOUT US Intrepid is an entrepreneurial organization committed to developing unique and environmentally sound ways of extracting minerals of global importance to multiple industries. While our legacy potassium products hold a strong reputation in the agriculture and feed industries, the expansion of our water, brine and other solutions contributes to the oil and gas industries to support energy resources. This diversification of products and customers expands our growth and impact beyond yesterday's needs. Working at Intrepid, you will experience the commitment, teamwork, and growth in every role and experience. We are proud to be an EEO/AA Employer M/F/D/V. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Dreaming big is in our DNA. It's who we are as a company. It's our culture. It's our heritage. And more than ever, it's our future. A future where we're always looking forward. Always serving up new ways to meet life's moments. A future where we keep dreaming bigger. We look for people with passion, talent, and curiosity, and provide them with the teammates, resources and opportunities to unleash their full potential. The power we create together - when we combine your strengths with ours - is unstoppable. Are you ready to join a team that dreams as big as you do? Job Purpose The Key Purpose of this role is to address the acquisition of technical skills and experience for graduates as well as familiarize them with the company culture and principles in an 18-month structured programme. The rigor of the programme should ensure that an individual that has completed the programme can be allocated an area of responsibility immediately. Key Outputs and Responsibilities: * The Traineeship is primarily a hands-on, self-study program where the Trainee is expected to gain a full understanding of the theory, principles and operation of equipment across the various department * Participation in projects is aligned to the program requirements and brewery priorities * Apply VPO principles * Diagnosis of systemic and situational problems and troubleshooting * Participation in team structures including acting roles in identified leadership positions within the department * Communication of learnings and solutions across various levels of the business Minimum Requirements * BSC, BEng or Btech or equivalent in Mechanical, Electrical/Electronics, Energy or Mechatronics * BSC Chemical Engineering * BSC/BTech Biotechnology, Analytical Chemistry or Chemistry or Biology Additional Information: * BAND: VIII SAB is an equal opportunity employer and all appointments will be made in line with SAB employment equity plan and talent requirements. The advert has minimum requirements listed. Management reserves the right to use additional/relevant information as criteria for short-listing

MacLean-Fogg is a global manufacturing company with more than 100 years of innovation and excellence. Guided by our core values-Integrity, People, Customers, and Stewardship-we continue to build on a century-long legacy while driving the future of manufacturing. Our diverse businesses serve the automotive, industrial, and other critical industries, creating an environment where talent thrives, creativity flourishes, and collaboration drives success. Location: Multiple U.S. Locations - View all locations Program Duration: Summer 2026 (10 Weeks) Pay Range: $18-$25 per hour (based on location, experience, and academic level) Program Overview Our Summer Internship Program offers real-world exposure to Environmental, Health & Safety practices in a manufacturing environment while contributing to meaningful projects from day one. Over 10 weeks, you will gain: Hands-on experience in EHS program development and compliance. Mentorship and guidance from experienced industry leaders. A professional network across functions and facilities. Career-ready technical and professional skills. When applying, you will be prompted to select all MacLean-Fogg locations where you are interested in being considered. What You'll Do As an EHS Intern, you will: Assist in conducting safety audits, inspections, and risk assessments. Support compliance activities related to OSHA, EPA, and other regulatory standards. Help develop and update training materials, safety procedures, and emergency response plans. Analyze EHS data and recommend improvements to reduce incidents and ensure compliance. Complete a capstone intern project and present results to leadership. Qualifications We're seeking motivated students who are ready to learn, grow, and contribute: Currently pursuing a degree in Environmental Science, Occupational Safety, Industrial Hygiene, Engineering, or a related field. Minimum 3.0 cumulative GPA (on a 4.0 scale). Knowledge of safety principles, environmental regulations, or compliance programs preferred. Strong analytical, problem-solving, and communication skills. Collaborative mindset with a willingness to take initiative. Ability to work on-site at one of our locations for the duration of the program. Compensation & Benefits Competitive hourly pay. Skill development through hands-on learning. Structured mentorship and feedback. Networking opportunities with peers and professionals. Experience presenting to leadership at program completion.

MacLean-Fogg is a global manufacturing company with more than 100 years of innovation and excellence. Guided by our core values-Integrity, People, Customers, and Stewardship-we continue to build on a century-long legacy while driving the future of manufacturing. Our diverse businesses serve the automotive, industrial, and other critical industries, creating an environment where talent thrives, creativity flourishes, and collaboration drives success. Location: Multiple U.S. Locations - View all locations Program Duration: Summer 2026 (10 Weeks) Pay Range: $18-$25 per hour (based on location, experience, and academic level) Program Overview Our Summer Internship Program offers real-world exposure to Environmental, Health & Safety practices in a manufacturing environment while contributing to meaningful projects from day one. Over 10 weeks, you will gain: Hands-on experience in EHS program development and compliance. Mentorship and guidance from experienced industry leaders. A professional network across functions and facilities. Career-ready technical and professional skills. When applying, you will be prompted to select all MacLean-Fogg locations where you are interested in being considered. What You'll Do As an EHS Intern, you will: Assist in conducting safety audits, inspections, and risk assessments. Support compliance activities related to OSHA, EPA, and other regulatory standards. Help develop and update training materials, safety procedures, and emergency response plans. Analyze EHS data and recommend improvements to reduce incidents and ensure compliance. Complete a capstone intern project and present results to leadership. Qualifications We're seeking motivated students who are ready to learn, grow, and contribute: Currently pursuing a degree in Environmental Science, Occupational Safety, Industrial Hygiene, Engineering, or a related field. Minimum 3.0 cumulative GPA (on a 4.0 scale). Knowledge of safety principles, environmental regulations, or compliance programs preferred. Strong analytical, problem-solving, and communication skills. Collaborative mindset with a willingness to take initiative. Ability to work on-site at one of our locations for the duration of the program. Compensation & Benefits Competitive hourly pay. Skill development through hands-on learning. Structured mentorship and feedback. Networking opportunities with peers and professionals. Experience presenting to leadership at program completion.

MacLean-Fogg is a global manufacturing company with more than 100 years of innovation and excellence. Guided by our core values-Integrity, People, Customers, and Stewardship-we continue to build on a century-long legacy while driving the future of manufacturing. Our diverse businesses serve the automotive, industrial, and other critical industries, creating an environment where talent thrives, creativity flourishes, and collaboration drives success. Location: Multiple U.S. Locations - View all locations Program Duration: Summer 2026 (10 Weeks) Pay Range: $18-$25 per hour (based on location, experience, and academic level) Program Overview Our Summer Internship Program offers real-world exposure to Environmental, Health & Safety practices in a manufacturing environment while contributing to meaningful projects from day one. Over 10 weeks, you will gain: Hands-on experience in EHS program development and compliance. Mentorship and guidance from experienced industry leaders. A professional network across functions and facilities. Career-ready technical and professional skills. When applying, you will be prompted to select all MacLean-Fogg locations where you are interested in being considered. What You'll Do As an EHS Intern, you will: Assist in conducting safety audits, inspections, and risk assessments. Support compliance activities related to OSHA, EPA, and other regulatory standards. Help develop and update training materials, safety procedures, and emergency response plans. Analyze EHS data and recommend improvements to reduce incidents and ensure compliance. Complete a capstone intern project and present results to leadership. Qualifications We're seeking motivated students who are ready to learn, grow, and contribute: Currently pursuing a degree in Environmental Science, Occupational Safety, Industrial Hygiene, Engineering, or a related field. Minimum 3.0 cumulative GPA (on a 4.0 scale). Knowledge of safety principles, environmental regulations, or compliance programs preferred. Strong analytical, problem-solving, and communication skills. Collaborative mindset with a willingness to take initiative. Ability to work on-site at one of our locations for the duration of the program. Compensation & Benefits Competitive hourly pay. Skill development through hands-on learning. Structured mentorship and feedback. Networking opportunities with peers and professionals. Experience presenting to leadership at program completion.