Underground electrician entry level jobs - 160 jobs

RESPONSIBILITIES: Assists electricians by performing assigned tasks under the direct supervision of an assigned electrician. Must keep all materials, tools, and equipment in an orderly fashion, maintain a clean work area at all times, demonstrate safe work habits and exhibit proper care of all tools and equipment. Experience in commercial, residential, and industrial electricity is preferred. TOOLS REQUIRED: Lineman's pliers with crimper, standard flat head and Phillips screwdrivers, wire strippers, razor knife, side cutters (pliers), hammer, tool pouch, voltage tester, plug tester, and a tape measure. A cordless drill is recommended but not required. WORKING CONDITIONS: May require working in all-weather elements (heat, cold, rain, snow, etc.) depending on job location and/or time of year. Must have required hand tools at all times while at work site (waist tool belts can weigh up to 30 lbs.). Must be able to work from all ladder types (i.e. step ladders up to 16', "A" frame ladders, and extension ladders). Must wear personal protective equipment (i.e. hard hat, safety glasses, safety harness, and respirator) as required. Must be able to work assigned hours as well as overtime, as required. Must work well with others as a member of a team to complete tasks. PHYSICAL REQUIREMENTS: Ability to bend, stoop, squat, crawl, climb, kneel, balance, push, pull, and reach overhead. Ability to independently lift work loads of up to 50 lbs. Repetitive use of arms, hands, and fingers. Ability to climb ladders of all types. Ability to work while constantly moving. Ability to reach and stretch to position equipment, fixtures, etc. while maintaining balance.

Job DescriptionWho We Are Alene Candles LLC & Midwest is a private label, contract manufacturer that produces high-quality candles for some of the world's most recognized retail, boutique, and cosmetic brands. With our headquarters in New Hampshire and locations in Ohio, we've been in business for over 30 years. We are passionate about making the best products in the world, making safety our number one priority, and being an insanely great place to work. The Position Alene Candles is seeking an Electrician to be responsible for servicing, maintaining, repairing, cleaning, testing, adjusting, removing, constructing and operating electrical systems, equipment, machinery, control systems, ups systems, emergency power systems, laboratory systems and alarm systems. You will work under supervision or independently with other trades, contracted personnel and research staff, demonstrating knowledge of electrical theory, code requirements, procedures and techniques in safely performing assigned duties with up to medium voltage circuits. The Location We are located at 8860 Smith's Mill Road, New Albany, OH 43054. This is an onsite position in a climate controlled environment. Hours This position will be based on 1st shift (5:00 am-1:00 pm), however we will also consider candidates interested in working a split shift covering 1st and 2nd shifts. Please note, you may be required to work after normal business hours including weekends for power shutdowns, maintenance, repairs, installations, etc. on an as needed basis. Additional Job Details ELECTRICAL INSTALLATION & MAINTENANCE: Install and maintain a variety of electrical equipment including fixtures, conductors, raceway systems, grounding systems, panel-boards, transformers, motors, controls, over-current protection, fire detection and alarm systems, appliances, communications systems, actuating devices, security-related components, and other equipment. DOCUMENTATION & REPORTING: Maintain records of test reports, blueprints, as-built plans, and other documentation. Report on the status of assigned equipment maintenance, repairs, capacities and efficiency to the supervisor. Prepare written requirements for repairs or for ordering parts from suppliers. SAFETY PROCEDURES & HAZARD ANALYSIS: Develop work procedures which identify tasks/steps and conduct hazard analysis to ensure safe working conditions and compliance with applicable guidelines. SYSTEM TESTING & FAULT DETECTION: Examine and test elements of electrical systems to locate faults, defects, and unsafe conditions using appropriate diagnostic equipment and techniques. CROSS-FUNCTIONAL COORDINATION: Coordinate with other Maintenance staff and contractor staff to accomplish work on new and renovated space, ensuring compliance with applicable company guidelines as well as national, state, and local regulations and requirements. CUSTOMER RELATIONS: Maintain good working relationships with staff and internal customers by displaying positive outlook and friendly relationships. TROUBLESHOOTING & REPAIR: Correct problems in electrical systems by troubleshooting circuits, replacing defective equipment such as over-current protection, wiring, motors, starters, and other related electrical parts, and removing items from power supply to halt unsafe operation. PREVENTIVE MAINTENANCE PROGRAM: Implement an effective preventive maintenance program using the site's computerized maintenance management system (CMMS). Perform preventive/predictive maintenance, repairs and adjustments on systems and controls, monitor and record effectiveness of maintenance activities and take corrective actions. SPECIAL ASSIGNMENTS: Perform special tasks requiring similar duties and responsibilities, as assigned. Required Qualifications Must be a Journeyman Electrician or nearly complete with the Journeyman path. Must have the training acquired of a 5 year period. Must understand and apply knowledge of regulatory codes and requirements, including the National Electric Code and local codes Skill in interpreting schematic drawings, charts, and technical instructions Preferred Qualifications Ability to work with minimum supervision by prioritizing and coordinating multiple assignments, initiating action, taking responsibility for completion of assignments, and communicating progress to customers and management Must be self-motivated with initiative to actively pursue opportunities and training to maintain craft specialty skills and certifications Good oral and written communication skills and customer service skills Familiarity with operation of personal computers and Microsoft Office (Word, Excel, Outlook) Experience with software commonly used for tracking and reporting system status in CMMS systems Ability to follow through and carry out assignments effectively Benefits Alene offers a host of competitive benefits for full-time employees, some of which include: Medical, Dental, and Vision with a Healthcare Reimbursement Account, 401(k) with company match, Basic Life Insurance (100% company paid), Employee Assistance Program, Flexible Spending Account, Paid Holidays, Paid Time Off, Tuition Reimbursement and “Alene Gives Back” - our paid volunteer program. Alene Candles provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Should you require assistance completing this application or during any phase of the interview process, please contact ********************* or call ************ and ask to speak to Human Resources. We will make every effort to accommodate your needs in a reasonable amount of time.

For almost 60 years, Converse Electric has been serving Columbus and the surrounding areas in all types and sizes of electrical projects, specializing in commercial and industrial projects -with solutions including new construction, remodels and additions, design/build, lighting control, fire alarm and more. Job Description The ideal candidate will have experience in the installation, alteration, addition and/or repair of electrical systems. As our Journeyman Electrician, you should be able to: Perform all electrical tasks with general supervision Read blueprints Understand and be familiar with rough-in work Install feeders Size wire and conduits Install and terminate switchgear and devices Prepare layout for installation, including underground layouts and rough-in Comprehend electrical theory and NFPA 70 National Electric Code If you have experience in the following, it's a plus: Install, troubleshoot and terminate control wiring per drawings Troubleshoot motors and controls Fire alarm systems (with current fire alarm license) Additional Information At Converse, we value our people and it shows through testimonials from our own field team: “Converse offers knowledge, work, growth, innovative ideas, a competitive wage and a skilled trade to our industry.” “I have been at Converse Electric for 20 years. From day one they have treated me like family.” “Converse is a great place to work because of the family like atmosphere. There is great camaraderie among the employees.”

Since 1869, we've connected people through food they love. We're proud to be stewards of amazing brands that people trust. Our portfolio includes the iconic Campbell's brand, as well as Cape Cod, Chunky, Goldfish, Kettle Brand, Lance, Late July, Pacific Foods, Pepperidge Farm, Prego, Pace, Rao's Homemade, Snack Factory, Snyder's of Hanover. Swanson, and V8. Here, you will make a difference every day. You will be supported to build a rewarding career with opportunities to grow, innovate and inspire. Make history with us. Job Description The Electrician is responsible for the planning, development, installation, connection, testing, maintenance, troubleshooting and repair of plant equipment and electrical systems. The electricians must be able to work in a variety of environments, problem-solve, and use tools and equipment appropriate for each job. Work will vary day-to-day depending upon the needs of the plant to maintain efficient operations. The electrician must be self-motivated, able to complete jobs in a timely and safe manner and must be able to work productively with other employees. Job Specifications Perform preventative and predictive maintenance on facility equipment and electrical systems and write work orders for follow-up in computer Install facility equipment and electrical systems as needed Troubleshoot and repair facility equipment and electrical systems PLC and VFC troubleshooting and experience required. Write and maintain standard operating procedures (SOPs) and Job Safety Analysis (JSAs). Complete daily maintenance and repair logs Communicate with operators, supervisors or other maintenance workers to diagnose problems and repair equipment and electrical systems Orders parts as needed Maintain and secure work tools Maintain a clean and orderly work area Perform all duties in accordance with safety policies and procedures in a manner that will least interfere with production operations and that maintains product / ingredient quality Other duties as assigned Education High school diploma. Desired Abilities Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals required. Ability to read and comprehend simple instructions, short correspondence required. Ability to write simple correspondence required. Ability to effectively present information in one-on-one and small group situations to other employees of the organization required. Ability to apply understand and carry out detailed written or oral instructions required. Manual dexterity required to operate machinery and computers. Ability to diagnose electrical problems and make repairs. Knowledge of standard materials, tools and equipment, and skill in the use and care of tools preferred. Ability to compute rate, ratio, and percent and to interpret miscellaneous drawings and schematics preferred. Ability to start on 2nd or 3rd shift is required. Must be willing to work all shifts, extended hours, weekends, and holidays as needed. Compensation and Benefits: The starting rate for this full-time, hourly position is $36.22 - $38.66 Starting pay is dependent on experience An individual's base pay depends on a number of factors, such as experience, job-related skills, and relevant education or training. Total pay may include other forms of compensation, such as a performance-based bonus and other short- and long-term incentives. In addition, we offer competitive health, dental, 401(k), and wellness benefits beginning on one's first day of employment. Please ask your Talent Acquisition Partner for more information about our total rewards package. Potential Shift Openings 2nd shift: 2pm - 10:30pm or 3pm - 11:30pm 3rd shift: 10pm - 6:30am or 11pm - 7:30am Site Perks Access to on-site gym* Onsite Campbells Credit Union Yearly employee appreciation giveaways/events Individual base pay depends on work location and additional factors such as experience, job-related skills, and relevant education or training. Total pay may include other forms of compensation. In addition, we offer competitive health, dental, 401k and wellness benefits beginning on the first day of employment. Please ask your Talent Acquisition Partner for more information about our total rewards package. The Company is committed to providing equal opportunity for employees and qualified applicants in all aspects of the employment relationship, including consideration for employment, without regard to race, color, sex, sexual orientation, gender identity, national origin, citizenship, marital status, protected veteran status, disability, age, religion, or any other classification protected by law.

Apollo Home has been serving the Greater Cincinnati area since 1910! At Apollo, we strive to deliver Peace of Mind for our customers- Health, Safety, Comfort and Efficiency through an unusually professional approach in how we provide solutions to our members. We recognize that achieving our mission is only possible if we develop the very best talent in the industry. Why We Need You! Because we offer top of the line products and services, we need top of the line electricians who genuinely care about the customer and look at this opportunity as not just a job but a career. The Big Task You will diagnose and repair electrical systems and lead customers to informed and confident buying decisions. Key Sub Tasks Maintain communication with dispatch, your manager, parts and installation teams. Keep your company truck clean, inside and out. Keep your truck inventory up to date. Properly complete paperwork. Join the on-call rotation. Maintain a clean and professional appearance. Have and maintain a clean driving record. Participate in training allowing you to grow and develop as a professional. Have or be willing to get the proper certifications. We can help you with this. Desired Skills and Experience Our top performers are among the highest paid technicians in Cincinnati. You'll have unlimited earning potential starting from $40,000 to $90,000 plus. Company supplied, take it home at night, new and safe, super-cool company truck. Health insurance- medical, dental, vision, life insurance, short-term and long-term disability. New technology, including iPhone, iPad & access to integrated software. State of the art tools, parts and supplies. 401k Plan with a company match. A family. This is last on the list because it's most important. We care about our team, and expect you to bring that same caring when you join. We do a lot more than just work together. You'll come to love our company outings, and you'll build life-long friendships at Apollo Home. If you want to be part of something bigger than just a job - make this career move and find exactly what you're looking for. You will work in a place where you will be appreciated by your team and customers, and where your work has a direct effect on the success of the company. If this sounds like you, spend a little time learning about Apollo Home by visiting ******************* When you're ready, please follow the directions at ******************************* to apply for this position. Equal Opportunity Employer

Job Description About Us: Bertke Electric Co. has been delivering top-notch electrical services to the Greater Cincinnati area since 1928. We've had the privilege of contributing to some of Cincinnati's landmark buildings, including the Hyatt Regency, Adams Landing, U.C. Geology and Physics Building, Riverbend Music Center, Kroger's Headquarters, and numerous grocery stores, retail stores, and small office build-outs. Specializing in electrical service work, we maintain and repair electrical equipment, offer infrared/thermal imaging, arc flash studies, and arc flash training. Our commitment to training and the safety of our employees is paramount. Position Summary: The Apprentice is responsible for assisting journeyman electricians in planning, installing, and repairing electrical systems. This position performs maintenance tasks, troubleshoot electrical issues, and learns how to safely handle electrical equipment and tools. The apprentice will receive on-the-job training and are required to be enrolled in a classroom-based apprenticeship program to enhance their knowledge and skills in the electrical trade. Duties/Responsibilities: Learn from journeyman electricians to perform the installation of electrical systems, wiring, lighting, and equipment according to local and national electrical codes. Participate in conducting routine maintenance of electrical systems to ensure they are in proper working condition. This may include supporting troubleshooting, repairs, and replacements. Learn to interpret and follow electrical blueprints, schematics, and diagrams to plan and execute installations accurately. Using testing devices to check the functionality of electrical systems, identify faults, and ensure compliance with safety regulations. Participate in inspections as required. Adhere to safety protocols and guidelines to ensure a safe working environment. Identify and mitigate potential electrical hazards. Stay updated on local and national electrical codes and regulations. Ensure all work meets the required standards. Interact with clients to understand their electrical needs, provide recommendations, and address any concerns. Participate in diagnosing electrical issues and develop effective solutions. Maintain a clean and organized work environment, ensuring safety standards are followed. Maintain accurate records of work performed. Attend training sessions, workshops, and educational classes to enhance skills and knowledge. Travel to job sites in the Ohio, Kentucky, and Indiana area. Required Skills/Abilities: Basic understanding of electrical systems and principles. Strong analytical, troubleshooting, and problem-solving skills. A strong willingness to learn Ability to follow instructions and work effectively as part of a team Good communication skills for interacting with coworkers and clients. Proficiency in using hand tools and power tools safely Education and Experience: Enrollment in an accredited electrical apprenticeship program required Previous experience in electrical, construction or a related field is a plus Physical Requirements: Ability to lift and carry objects up to 50 pounds. Capable of standing, kneeling, and crouching for extended periods. Comfortable working in various weather conditions and environments. We are an equal opportunity employer and do not discriminate based on race, color, religion, sex, national origin, age, disability, or any other legally protected status.

Job Description INDUSTRIAL ELECTRICIAN - Willoughby, OH Salary based on experience $19-30/hour Industrial Electrician - Manufacturer of Process Heating / Cooling Machinery Industrial Electrician experienced to run conduit, pushing wire, point to point wiring. Knowledge wiring instrument controls, pumps, heaters, control valves and installation of pneumatic tubing. Understanding of Industrial Electrical Codes: NEC, NFPA 70, Explosion Proof Class I Div II, UL, CSA /CE codes and regulations. Medical Insurance Dental/Vision Insurance Short Term Disability Insurance Long Term Disability Insurance 401K Plan with company match Paid Holidays Paid Time Out

Job DescriptionBenefits/Perks Flexible Scheduling Competitive Compensation Career Advancement Opportunities We are seeking a skilled Electrician to join our team! You will be responsible for installing and repairing wiring, electrical fixtures, and control equipment, as well as training apprentices on the job. If you are a Journeyman Electrician with a can-do attitude who takes pride in his work, we want to hear from you. Responsibilities: Follow all safety rules and regulations Maintain a clean and safe work environment Use blueprints, sketches, or building plans to determine electrical requirements and materials needed Install new electrical systems and repair existing systems Provide bids for work orders Interact with customers, suppliers, and other professionals Qualifications: Journeyman Electrician License Previous experience as an Electrician is preferred Valid Drivers License Ability to stand for long periods and lift heavy objects Strong understanding of mathematical concepts and measurements Professional appearance and courteous personality

Temp HKA Enterprises is unable to support C2C. 3 rd party submissions and C2C requests will not be considered for any positions. **$1,500 bonus** Qualifications: Will not be strictly electrical work, role requires all aspects of facility maintenance. Perform equipment checks & PMs. Strong general mechanical and plumping aptitude. Willingness to work & learn all disciplines. Start/Stop, Troubleshoot, repair, maintain FAC equipment. Self-starter, prioritize work orders based on deadlines and equipment issues. Strong Electrical Power Distribution Knowledge and experience 24V, 120V, 480V, 4160V, 12470V Both single phase and three phase experience Ability to read and interpret electrical one-lines Experience with the following gear High Voltage Switches Substations Busway & Bus Plugs MCC Transformers Breakers Panels Disconnects Experience with the following tools & PPE Megger, Voltmeter, Amp clamp 40 Cal Arc Flash Suit & Electrical Gloves Hot Stick, Shotgun, Electrical Blanket Ground straps, grounding high voltage Must be a US citizen. Valid Driver's License Journeyman Preferred No Residential Trained on NFPA 70E, and ability to train Boom lift, scissor lift, forklift, and cushman carts. Training in motor and motor controls, variable frequency drives, and PLC / BMS controls. Ability to read complex wiring diagrams, identify electrical components, and extensive knowledge in troubleshooting of control circuits. Uses guidelines from the National Electrical Code, local codes, safety regulations and Jacobs standard practices. Wears PPE and ARC Flash equipment while performing live troubleshooting. Experience with industrial HVAC Responsibilities: Climb ladders, stairs, work from heights/roof, walk distances, work in hot/cold climates, lift 50lbs. Work OT, Weekends, Holidays as necessary. Support weekend coverage rotation. Report to work during harsh weather conditions. Ability to work on a team. Ability to utilize scissors lift, boom lift, fork truck, 3-wheel cart, hoist way. Responsible to locate tools, supplies, materials to job site including carrying items upstairs & to the roof. Responsible for tools, supplies, 5S, COP. Ability to read and understand system blueprints, specifications, and performance data to determine configuration and purpose of system components such as compressors, motors, pumps, fans, switches, controls, ducts, or pipes. Installs power supply wiring and conduit for newly installed machines and building equipment. Connects power supply wires to machines and building equipment, connects cables and wires between machines and equipment. Diagnoses malfunctioning apparatus such as transformers, motors, motor starters, MCC panels, MCC circuits, variable frequency drives and lighting fixtures and replaces damaged or broken wires, cables, and fuses. Dismantles malfunctioning systems and tests components. Replaces faulty electrical components of machine such as relays, switches, sensors, motors, and positions sensing devices. Plans layout of wiring and installs wiring, conduit, and electrical apparatus in buildings. Responsible for accurate and timely paperwork related to essential duties and responsibilities. Performs preventative maintenance tasking on electrical and mechanical equipment. Second shift 3:00 PM to 11:30 PM (30 minute lunch) Overtime required #electricalpowerdistribution #journeyman #highvoltage #electrician 40.00

Primary Function Install, inspect, maintain, repair, and wire all electrical apparatus, devices and circuits of any voltage. Tools and Equipment Test equipment and instruments, lathe, electrical welder, soldering equipment, power hand drills and grinders, miscellaneous hand tools, drill press, saws, pipe benders, safety devices. Materials All types and sizes of AC and DC electrical equipment, repair and replacement parts and supplies, motors, generators, circuit breakers, power distribution and control circuits, conduit and fittings, wire and cable, hardware, insulation, solder, etc. Working Procedures Receives instructions from supervision regarding work assignments. Analyses drawings and wiring diagrams to install circuits and equipment and to determine need for and method of repair or replacement. Plans working procedure; considers all safety precautions and the proper isolation of circuits to cause minimum of interference to operations. Determines necessary tools and materials. Locates sources of electrical troubles by tracing and testing circuits for faulty operation. Dismantles, inspects, repairs, adjusts or replaces parts and wiring on motors, generators, distribution and control panels, circuit breakers, rectifiers, electronic devices, meters, etc. Installs or re- assembles tests and adjusts equipment for safe and proper operation. Performs work on hot lines when required. In emergencies, shuts out defective coils in order to get equipment back in operation. Changes DC motor characteristics by shunting series coils, etc. Fabricates parts as required, using shop machine and hand tools. Starts and stops air compressors. Alternates water pumps on air compressor. Keeps work area clean and orderly. Note: This job description is not intended to be all-inclusive. The employee may be required to perform other duties as assigned. If you meet the requirements above and are interested in joining our team, please apply with your updated resume. We look forward to reviewing your application! Requirements Source of Supervision Foreman. Direction Exercised Works alone or directs others as required.

Job Description Residential Service Electrician Dayton, OH Apply Now at Apex Pros Full-Time | No On-Call | Dispatched from Home Apex Plumbing, Electric, Heating, and Air is expanding and looking for an experienced Residential Service Electrician to join our team in the Dayton area. At Apex, we're not just another contractor we're a team committed to professional excellence, customer satisfaction, and cutting-edge solutions in home services. If you're a highly skilled electrician who takes pride in craftsmanship and values a company culture that supports growth and work-life balance, we want to hear from you. What You'll Do: Install, maintain, and repair residential electrical systems in accordance with local codes and safety standards Perform inspections and troubleshooting, identifying issues and providing efficient, cost-effective solutions Read and interpret blueprints, schematics, and technical diagrams Communicate effectively with homeowners, team members, and contractors to ensure project expectations are met Manage daily service calls independently while also contributing to a team-focused work culture Ensure a clean, professional job site and a respectful customer experience every time Requirements Residential electrical experience (Required) Valid Driver's License (Required) Deep understanding of residential electrical systems, components, and safety protocols Knowledge of local electrical codes and best practices Ability to read and interpret blueprints and wiring diagrams Strong problem-solving and troubleshooting skills Excellent communication and customer service abilities Self-starter mindset with the ability to manage your own schedule and workflow Benefits 401(k) 401(k) 3% Match Dental insurance Employee discount Flexible schedule Health insurance Health savings account On-the-job training Paid time off Referral program Safety equipment provided Vision insurance

The Electrician III is responsible for all aspects of residential, commercial, and industrial wiring, troubleshooting, installing, and repairing of Rumpke owned equipment and buildings. Schedule and complete repairs and installations according to company priorities. Install new residential, commercial, and industrial service equipment. Perform commercial & industrial troubleshooting, repairs, and installations. Perform accurate daily time sheets. Maintain and ensure the safe operating condition of assigned equipment and tools according to company policy and OSHA. Perform skilled electrical maintenance and repair in a safe manner in compliance with all local, state, and federal regulations and company policies. Supervise Electrical Contractors on large projects as assigned by Electrical Department Manager. Professional interaction with internal and external customers. Maintain open communication with the Electrical Department Manager. Follow all company policies. Other duties as assigned. Skills & Abilities Needed for Position: Must obtain your Journeyman license within 6 months of employment. Proficiency with National Electrical Codes and OSHA regulations. Self-motivated and work efficiently with minimal supervision. Capable of using all electrical testing equipment and electrical tools. Proficient bending and installing Rigid and EMT conduit. Must have the knowledge and experience to make code compliant and safe repairs and installations. Ability to work at different heights with necessary safety equipment. Must be available to be on-call. May be assigned to work various hours and shifts based on business needs. Requires out of town overnights stays. Additional Working Conditions/Aspects: Exposure to residential and commercial waste. Ability to travel between offices, as required. Ability to work flexible hours; overtime, weekends, and/or holidays. Ability to work overtime, weekends and/or holidays. Must be available for 24-hour emergency calls. Legally eligible to work in the United States. Valid driver's license (if applicable). Must successfully complete pre-employment testing. Must be able to read and speak the English language. This job description is intended to describe the general nature, complexity, and level of work to be performed by employees assigned to this position and is not to be construed as an exhaustive list of responsibilities, duties and/or skills required. It does not prescribe or restrict the work that may be assigned. Furthermore, this does not establish a contract for employment and is subject to change at the discretion of the company. Rumpke Waste and Recycling is committed to equality in all aspects of employment. It is Rumpke's policy to provide equal opportunities to all employees and potential employees without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status or disability status.

ELECTRICIAN URGENTLY NEEDED! Subcontractor to earn year round work with our company! Serving Cincinnati-Dayton-Northern KY All Claims Repairs 43 years in Restoration & Property Damage Solutions! Must be Dependable & Hard working Subcontractor Requirements W9 BWC certificate Insurance Certificates (general and auto liability) Background check and VCC form for each employee who will be on job site. List of trades you specialize in. * Start application online. Additional directions will be given*

Job Description **REACH FOR THE SKY!!! JOIN OUR TEAM OF TRAILBLAZERS! ** Our company is a rapidly growing trendsetting team that is looking for career minded individuals who are looking to advance and grow with us! "ARE YOU UP FOR THE CHALLENGE?" We are happy to provide you with a competitive wage, up to 7 weeks PTO (paid time off) and a stellar benefit package consisting of: -Medical Insurance (bundled with a $2000 HRA annual plan), Vision, Dental, Short Term Disability, Long Term Disability, Life Insurance, and additional supplemental benefits. - 401(k) Profit Sharing Plan with company provided dollar for dollar match up to 6% of earnings. Paid holidays, Paid Birthday, on- call pay and uniforms with free laundry service. We will provide all required training and pay for manufacturers' certifications as you advance your career with Petro Towery. You will be provided with a company service vehicle, cell phone/tablet as well as all tools necessary to perform your job. Install electrical and fueling equipment at new retail and commercial fuel facilities Upgrade electrical and fueling equipment at existing retail and commercial fuel facilities Install emergency shut off and low voltage disconnects at fueling facilities Install indoor and outdoor lighting Operate aerial lifts and bucket trucks Run electrical conduits and pull wiring to electrical controls and lighting systems Understand and comply with applicable NEC, NFPA, OSHA, and EPA rules and regulations Requirements Valid Journeyman/Master electricians license required. Ability to read blueprints. Extensive knowledge of electrical systems and wiring. Ability to use hand tools and power tools. Proficient in the use of test meters and other diagnostic equipment. Excellent analytical and problem-solving skills. Ability to pass a DOT medical exam and drug screen Must be able to see color to discern color-coded wiring. Prolonged periods standing, kneeling, bending, and climbing ladders or scaffolding. Must be physically capable of pulling wires and cables through conduits. Must be able to lift up to 50 pounds at a time. Benefits Medical, Dental, Vision, 401(k) with 6%match, life insurance, short and long term disability, company truck, tools, uniform service, mileage and per diem reimbursement, etc.

Are you a experienced and skilled Electrician? Do you enjoy and excel working in challenging work environments? Are you looking for an opportunity to get in the field more and solve problems? Is a stable and reputable company important to you? Melvin Stone Company is hiring an Electrician to bring new ideas/initiatives and technology to management on a consistent basis. This position will do local travel (no overnight). Your territory will by Southwest OH, Northern KY and Southeastern IN. We are looking for experience with working on electrical projects within aggregate facilities, with a strong background working with 480 volt electrical systems, drives, PLCs, and controls. We believe in supporting our employees and their families, which is why we provide market leading benefits packages. Please review some of the highlights below. Benefit Highlights: -$0 Deductible health insurance -401k - Market leading employer match -Bonus Program -Dental -Vision -Paid Time Off -Paid Holidays -Life Insurance -Short Term Disability Electrician Responsibilities not limited to: Provide analysis, evaluation and review of problems regarding automation, advanced methods and equipment, material handling, layout and material flow. Provide alternative solutions to anticipated or actual technical manufacturing problems. Utilize new equipment advances such as PLC (programmable logic controller). Plan and supervise power distribution equipment specific to the aggregate manufacturing industry. Working extensively with electrical equipment such as circuits and transformers. Design new equipment or redesign existing equipment, and coordinate its fabrication, assembly, installation, and startup. Supervise sub-contractors used onsite as needed. Electrician Skills / Qualifications: Working knowledge of aggregate plant operations is preferred. MSHA certified is a plus. Knowledge of routing electric power, controlling its quality, and controlling the devices attached to a power system. Experience working with low and medium voltage and PLC automation. Proficient in PC software packages (MS Power Point, Excel) and applicable engineering tools, knowledge of AutoCAD is a plus. Ability to work with mathematical concepts such as probability and statistical inference. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instruction in mathematical or diagram form. Experience working with motor controls, power distribution and instrumentation and control systems. Strong technical aptitude, analytical and problem-solving skills. Excellent written and verbal communication skills, along with an open and collaborative attitude. Awareness of industry safety systems, legislation codes and contractual documentation. Electrician Working Conditions: Most days will be spent in the field on site, however you will work in office environments. Working onsite at an aggregate plant, possibly in remote locations exposed to extreme weather conditions. Will work in a team environment with other professionals. Must be flexible to work overtime and various shifts as needed. EOE/M/F/Disabled/Veteran/DFSP

**REACH FOR THE SKY!!! JOIN OUR TEAM OF TRAILBLAZERS! ** Our company is a rapidly growing trendsetting team that is looking for career minded individuals who are looking to advance and grow with us! "ARE YOU UP FOR THE CHALLENGE?" We are happy to provide you with a competitive wage, up to 7 weeks PTO (paid time off) and a stellar benefit package consisting of: -Medical Insurance (bundled with a $2000 HRA annual plan), Vision, Dental, Short Term Disability, Long Term Disability, Life Insurance, and additional supplemental benefits. - 401(k) Profit Sharing Plan with company provided dollar for dollar match up to 6% of earnings. Paid holidays, Paid Birthday, on- call pay and uniforms with free laundry service. We will provide all required training and pay for manufacturers' certifications as you advance your career with Petro Towery. You will be provided with a company service vehicle, cell phone/tablet as well as all tools necessary to perform your job. Install electrical and fueling equipment at new retail and commercial fuel facilities Upgrade electrical and fueling equipment at existing retail and commercial fuel facilities Install emergency shut off and low voltage disconnects at fueling facilities Install indoor and outdoor lighting Operate aerial lifts and bucket trucks Run electrical conduits and pull wiring to electrical controls and lighting systems Understand and comply with applicable NEC, NFPA, OSHA, and EPA rules and regulations Requirements Valid Journeyman/Master electricians license required. Ability to read blueprints. Extensive knowledge of electrical systems and wiring. Ability to use hand tools and power tools. Proficient in the use of test meters and other diagnostic equipment. Excellent analytical and problem-solving skills. Ability to pass a DOT medical exam and drug screen Must be able to see color to discern color-coded wiring. Prolonged periods standing, kneeling, bending, and climbing ladders or scaffolding. Must be physically capable of pulling wires and cables through conduits. Must be able to lift up to 50 pounds at a time. Benefits Medical, Dental, Vision, 401(k) with 6%match, life insurance, short and long term disability, company truck, tools, uniform service, mileage and per diem reimbursement, etc.

- Ensure all electrical, mechanical, and fire/life safety equipment in the data center operates at peak efficiency. - Perform planned preventative maintenance, daily corrective work, and emergency response for critical systems. - Serve as an expert technical resource, reporting to a program manager and interacting with Onsite Engineering Operations (OEO) and third-party vendors. - Act as the main point of contact for all facility operations within the assigned data center. - Maintain better than 99.999% uptime for mission-critical server support equipment. - Apply safe working practices, including lockout/tagout procedures, Safety Data Sheets (SDS), and good housekeeping. - Use hand tools and test equipment to install, troubleshoot, and repair new or replacement parts for existing units. - Read and review blueprints, wiring diagrams, mechanical riser drawings, and job specifications. - Assist higher-level technicians (CET2) with more advanced procedures as needed. - Conduct daily facility walk-throughs, documenting parameters such as power availability, temperature, humidity, and alarm status for trend analysis. - Utilize Building Management System (BMS) and Electrical Power Monitoring System (EPMS) to monitor and verify the status of infrastructure. - Log all maintenance activities in the Computerized Maintenance Management System (CMMS). - Learn and follow site-specific processes, including incident/outage reporting, procedure execution, and use of SharePoint for accessing procedures and training content. - Understand and participate in site emergency operations plans (EOPs) as a first responder in the data center. We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to ********************.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: **************************************************** Skills and Requirements - Ability to obtain secret security clearance - 3 years of direct electrical experience in critical facility such as a data center or a hospital, while in operation NOT while in construction - Must be proficient in both electrical power (AC and DC) and mechanical systems. The role requires skills in both installation and troubleshooting. - Experience with specific mission-critical systems is essential. These include: o Uninterruptible Power Supplies (UPS) and batteries o Power Distribution Units (PDUs) o Standby generators and fuel systems o Automatic Transfer Switches (ATS) o Building Management Systems (BMS) and Energy Management Systems (EPMS) - Strong sense of urgency and responsiveness when working in mission-critical environments, ensuring rapid and effective action to maintain uptime and address any issues that arise. - ACTIVE State Licensed Electrician (differs state by state, some states do not have Journeyman but have Licensed or Master. Can be from any state as long as it is active)

You may not know our name, but you know our products. What we make is part the places where we live, work and play - all day, everyday. Zekelman is a family of companies - 100% domestic manufacturers - with a legacy dating back to 1877. We're proud to be the largest independent steel pipe and tube manufacturer in North America and the leading innovator in multi-family housing development. We believe in what we build and what we build, builds the world around us. Hospitals, hotels, schools, bridges, airports and more. Come build a career you believe in. About the Role As an Electrician at Zekelman Industries - Sharon Tube, you'll play a key role in supporting plant operations through expert electrical maintenance and troubleshooting. From repairing industrial control systems to maintaining equipment uptime, this position is critical to plant efficiency. This role is ideal for someone who enjoys hands-on work, has strong attention to detail, and thrives in a fast-paced, rotating shift environment. Shift: Rotating 8-Hour Shifts Pay: $34.43/hour + $6,000 Sign-On Bonus + Production & Monthly Attendance Bonus What You'll Do Performs electrical maintenance across all plant areas, including control systems, power systems, and speed control drives Troubleshoots programmable logic controllers (PLCs), motors, drives, and relays Bends and installs conduit and wiring for equipment installations and upgrades Executes preventive and predictive maintenance on electrical systems and components Adheres to OSHA and company safety policies and procedures, including LOTO and Arc Flash Prepares documentation and reports in accordance with company standards Supports crane repair and electrical servicing of plant operations equipment Performs other duties as assigned by management Maintains regular, full-time onsite attendance in alignment with scheduling expectations Who You Are Prior manufacturing or industrial electrical experience preferred Proficient in troubleshooting PLCs, motors, drives, and relays Capable of reading electrical schematics and following technical diagrams Strong communication skills with the ability to work independently or collaboratively Detail-oriented with the ability to manage multiple priorities in a fast-paced setting Displays a positive attitude and maintains effective working relationships Mechanical aptitude and computer literacy required Available to work rotating shifts, weekends, and overtime as needed Able to pass a drug screening, physical, and background check Legally authorized to work in the U.S. Physical Abilities Must be able to lift, climb, bend, and work at heights or in confined spaces typical of an industrial maintenance environment. What You'll Get Zekelman Industries offers competitive compensation and excellent benefits, including company-paid coverage and advancement pathways. You'll be part of a team that invests in your growth and rewards your contributions: Flat-Rate Healthcare Plan - (95/5 PPO Plan) Dental - Company Paid Vision - Company Paid 401(k) with Company Match Life Insurance - Company Paid Advancement Opportunities Company-Paid Training Paid Vacation & Holidays Employee Loyalty Awards Zekelman Industries offers competitive compensation and excellent benefits, including low-cost, high-quality medical and dental benefits. In addition, we have an amazing tuition assistance program, a bonus plan, a 401(k) plan with a generous company match, immediate vesting, and much more. M/F/D/V We are Zekelman Industries. We manufacture superior quality tubular and related products, and provide outstanding service for our valued customers. We seek to continuously advance the skills and opportunities of our employees, utilizing the latest technology and management tools available to consistently increase profitability and the enterprise value of Zekelman Industries and of our customers.

The Electrician III is responsible for all aspects of residential, commercial, and industrial wiring, troubleshooting, installing, and repairing of Rumpke owned equipment and buildings. Schedule and complete repairs and installations according to company priorities. Install new residential, commercial, and industrial service equipment. Perform commercial & industrial troubleshooting, repairs, and installations. Perform accurate daily time sheets. Maintain and ensure the safe operating condition of assigned equipment and tools according to company policy and OSHA. Perform skilled electrical maintenance and repair in a safe manner in compliance with all local, state, and federal regulations and company policies. Supervise Electrical Contractors on large projects as assigned by Electrical Department Manager. Professional interaction with internal and external customers. Maintain open communication with the Electrical Department Manager. Follow all company policies. Other duties as assigned. Skills & Abilities Needed for Position: Must obtain your Journeyman license within 6 months of employment. Proficiency with National Electrical Codes and OSHA regulations. Self-motivated and work efficiently with minimal supervision. Capable of using all electrical testing equipment and electrical tools. Proficient bending and installing Rigid and EMT conduit. Must have the knowledge and experience to make code compliant and safe repairs and installations. Ability to work at different heights with necessary safety equipment. Must be available to be on-call. May be assigned to work various hours and shifts based on business needs. Requires out of town overnights stays. Additional Working Conditions/Aspects: Exposure to residential and commercial waste. Ability to travel between offices, as required. Ability to work flexible hours; overtime, weekends, and/or holidays. Ability to work overtime, weekends and/or holidays. Must be available for 24-hour emergency calls. Legally eligible to work in the United States. Valid driver's license (if applicable). Must successfully complete pre-employment testing. Must be able to read and speak the English language. This job description is intended to describe the general nature, complexity, and level of work to be performed by employees assigned to this position and is not to be construed as an exhaustive list of responsibilities, duties and/or skills required. It does not prescribe or restrict the work that may be assigned. Furthermore, this does not establish a contract for employment and is subject to change at the discretion of the company. Rumpke Waste and Recycling is committed to equality in all aspects of employment. It is Rumpke's policy to provide equal opportunities to all employees and potential employees without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status or disability status.