United Steel jobs

Come join the team at United Steel, New England's largest fabricator and erector of structural steel and miscellaneous metals! United Steel is currently seeking an Ironworker, Structural Steel. This position is responsible for laying out and fabricating structural steel and sheet metal in order to build metal structures. Welds and cuts steel, interprets blueprints, and works with concrete reinforcing steel bars. Please click or copy the link below to complete a pre-hire survey. It must be completed to be considered for the position. It will open in a separate window. Applicants will not be considered until completing this process. Culture Index - Ironworker Duties & Responsibilities Installing plumb cables (not plumbing building). Bolting up and snapping bolts (additional safety training required) Laying deck - Sloped. Controlled deck zone safety training. Small tool training: torches, deck, saw, welders, drills Welder - 3/8 flat, vertical and overhead Lift certification - Safety. Fasten deck. Spread joist. Weld joist. Spread and weld (bolt) bridging - all types. Install safety cable and perimeter protection. Forklift training. Crane hand signals (review). Unloading truck Shake out. Installing stanchions, rat lines on beams before erecting. Blueprint reading. Rigger (ground man) - safety/equipment Welder - wire feeder all positions. Connecting. Sequencing of steel erection - advanced MP drawing training Lintel Layout Detail worker - perimeter angle, kickers, seismic, accessories Qualifications High school diploma or general education degree (GED); or one to 3 years related experience and/or training; or equivalent combination of education and experience. Must have a valid driver's license and reliable transportation and willingness to travel to jobsites. Ability to read and interpret documents such as safety rules, operating and procedure manuals. Ability to read and comprehend safety rules, simple instructions, short correspondence, and memos. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Skills Desired: strong attention to detail, ability to multitask, good communications skills. Must pass criminal background check and drug test. Working Conditions While performing the duties of this job, the employee is frequently exposed fumes or airborne particles, moving mechanical parts, noise and vibration. The employee is occasionally exposed to a variety of condition within a manufacturing environment. The company provides engineering controls, PPE and regular training to mitigate the employee's exposure to these elements. We offer competitive wages, excellent benefits, 401(k) with company match, supplemental benefits and more. Please send your resume and cover letter using the link. *************************** SUPPORT IS OUR STRENGTH An Affirmative Action / Equal Opportunity Employer

Creating A Healthier Way of Living Rinnai America Corporation is the leader in tankless water heating, a technology that is growing rapidly as businesses and homes “yank the tank” and convert to an efficient, endless supply of hot water and the only tankless water heating manufacturer in the US. We have a commitment to our employees and a strong, accountable culture with a practice of giving back to our communities. Rinnai America Corporation (RAC) is looking for RAC-STARS! Check out why Rinnai is the hottest place to work *************************************** What does a Regional Service Manager do at Rinnai? This position exists to develop and manage Rinnai's field service network throughout the assigned region and to provide technical support, as needed, in resolving escalated product issues. The position will provide product training throughout the region and will support, as necessary, major product installs, ensuring proper sizing and installation for the project. This position will manage a territory that includes Boston, Cranston, New Haven, Hartford, Springfield, and surrounding areas. The pay range for this position is $100,259 - $124,336 annually plus 20% bonus paid annually. Company Vehicle provided. Must be able to travel up to 75% within the territory. Other Perks/Benefits: Best-in-class health benefit programs that provide eligibility on 1st day of employment, 401k match, company vehicle, Paid Volunteer Community Service Day, and so much more. RESPONSIBILITIES Establish an authorized service network within the region of responsibility for in home/onsite service of product manufactured and sold by Rinnai. Negotiation of all labor rates for authorized service agreements within the region of responsibility Monitor the quality of service being provided by authorized service agents and where necessary develop individual improvement programs for identified service agents not performing to required standards Provide ongoing technical training to areas Sales Representatives, customers, Installers, and authorized Service agents Provide support, as needed, in addressing and resolving escalated field product performance issues Provide support on major commercial product install projects ensuring proper sizing and correct installation of products used in the project. Provide developmental support to Rinnai's Regional Service managers and off-site Technical Specialists located throughout North America. Serve as liaison between the field and Rinnai's Engineering department in the identification of possible performance or quality issues and gathering of information in support of the same Provide support on major product install projects ensuring proper sizing and correct installation of products used in the project Interface with local code officials to address and work through identified code issues Represent Rinnai on off site visits and/or liability investigations as required. Maintain company provided tools, equipment and property. Ensure all activities involved in comply with established legislative laws and/or Company policies and procedures REQUIREMENTS: KNOWLEDGE Bachelor's degree and/or equivalent experience in a related field of study such as electrical, electronics, plumbing systems, hydronics, and/or boiler systems. Engineering degree preferred. Plumbing/HVAC/Electrical or Gas License required. Minimum 5 years troubleshooting experience with residential and commercial gas water heaters and boiler systems. Previous experience in training/teaching required. Minimum of 2 years' experience in managing a territory preferred. Commercial Boiler Systems experience a plus SKILLS Must possess excellent communication skills, both written and verbal, with the ability to present in front of groups. Must be a self-starter with the ability to work both individually and in a team environment. Ability to multitask. High degree of technical and analytical skills. Ability to work with various levels of people, customers or teams. Knowledge in use of Word, Excel, Power Point and various web-based tools. Customer / Quality discipline ABILITIES Ability to lift to 75 lbs. Ability to travel up to 75% and submit expenses for reimbursement weekly. Ability to safely operate company provided tools, equipment and property. Professional approach; confidence in dealing with people Commitment to achieving established business goals Strong technical / customer service orientation High level of personal integrity and honesty Team player, able to operate with a great deal of independence Physical Requirements: Physical Activities Ascending or descending ladders, stairs, scaffolding, ramps, poles and the like. Moving self in different positions to accomplish tasks in various environments including tight and confined spaces. Remaining in a stationary position, often standing, or sitting for prolonged periods. Moving about to accomplish tasks or moving from one worksite to another. Adjusting or moving objects up to 75lbs and repeating motions that may include the wrists, hands and/or fingers. Constantly communicating with others to exchange information. Operating motor vehicles or heavy equipment. Assessing the accuracy, neatness and thoroughness of the work assigned. Environmental Conditions Occasionally low and high temperatures. Outdoor elements such as precipitation and wind. Noisy environments. Hazardous conditions. Poor ventilation. Small and/or enclosed spaces. No adverse environmental conditions expected Physical Demands Constant sedentary work that primarily involves sitting/standing. Occasionally, Light work that includes moving objects up to 20 pounds. Medium work that includes moving objects up to 50 pounds. Benefits Medical, Dental, Vision, and Prescription Flexible Spending Account (FSA) options for Medical and Dependent Care Paid Time Off (PTO), Floating Holidays (FH) Paid Holidays 401(k) Plan with Company Match Company Paid Life Insurance Voluntary Life Insurance Short- and Long-Term Disability Professional Development Tuition Reimbursement Annual Incentive Plan (AIP) Referral Bonuses Paid Volunteer Community Service Day Tobacco and Drug-Free Campuses Employee, family, and friend's discount Rinnai America Corporation is an equal opportunity employer that is committed to inclusion and diversity. We take affirmative action to ensure equal opportunity for all applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other legally protected characteristics.

Lane Construction is one of America's leading construction companies, specializing in large, complex civil infrastructure. For 135 years, it has contributed to the development of the country's transportation systems including the Interstate Highway System and a vast network of roads, bridges, airports, metros, and railways. Lane specializes in mobility, tunneling, and water resources to address sustainable development and climate change adaptation challenges. Responsibilities: Performs validation of weekly and monthly payroll. Performs general ledge account reconciliations. Resolves day-to-day payroll issues of varied complexity and scope. Assists with software updates and testing. Manages unclaimed property. Prepares analysis and develop key metrics (example timecard reporting). Assists in documentation of department SOPs. Assists the field with questions and training. Prepares monthly payroll accruals. Troubleshoots system and payroll issues. Reviews payroll inbox and either action or assign email. Performs other duties as assigned. Requirements: Bachelors Degree 5 years of experience in payroll, accounting, or related field Lane Construction offers a comprehensive benefits package with an excellent opportunity to grow and be part of one of the most respected names in the construction industry. Lane is an Equal Opportunity Employer.

About the job Do you enjoy connecting with people? Do you like delivering a great product? Are you comfortable asking for the sale? If so, this position is for you! The Replacement Sales Consultant is responsible for presenting the Pella Promise for a completely satisfying turn-key installation of replacement windows to homeowners. Achieve individual sales goals through assertively presenting a compelling case for customers to choose Pella. Understand customer wants and needs, and translate our product offerings to match. Strive for a first-time close and plan for and deliver effective follow up on the rest. Proactively seek out new referrals through customer relationship networking. Continually strive for a 100% “Very Satisfied” customer experience every time. Pella Windows & Doors of CT-NY (Pella CT-NY) is the exclusive independent distributor of Pella products throughout Connecticut and Hudson Valley New York. Pella, founded in 1925, is one of the nation's most respected window and door manufacturers, with high-quality products designed for both residential and commercial applications. Headquartered in Pella, Iowa, the company operates 18 manufacturing facilities with 10,000 employees nationwide. Pella CT-NY, recently acquired by Army Veterans Michael Maniaci and Miles Kirwin, is a fast-growing, mission-driven team that's committed to delivering premium products, exceptional customer service, and strong, long-term partnerships with clients. Our expert team delivers end-to-end windows and doors solutions, from product sales, to installation, to service backed by one of the strongest warranties in the industry. The Replacement Sales Consultants (RSC) primary duty is closing sales through consistent and effective delivery of our proven selling model. The RSC is required to: Adopt and deliver a structured sales presentation. Prepare and present a price quote before leaving every appointment. Follow up and respond to all customer questions within 24 hours. Be available for customer appointments during evenings and Saturdays, in addition to weekday hours. Responsibilities Represent and sell replacement Pella products and services to homeowners. Aggressively execute on all opportunities through effective time management skills and efficient use of contact management software. Maintain an exceptional level of expertise of products/services relating to Pella's customers, as well as staying abreast of the competitive landscape. Develop and maintain solid team-based relationships and communications with internal personnel. Visit and/or contact jobs during and/or post installation to ensure a World Class Customer Experience. Always exhibit the highest standard of personal ethics Skills/Knowledge: Customer Trust & Relationship Building Sales Excellence & Value-Based Closing Communication & Influence Technical & Problem-Solving Ability Drive, Tenacity & Work Ethic Collaboration & Professional Discipline Minimum Qualifications Valid Driver's License and meet minimum insurance requirements Ability to lift and carry Sales Tools that could weigh up to 50 pounds Preferred Qualifications College degree Experience in B2C Outside Sales What We Offer Medical, dental, and vision insurance for you and your qualified dependents Eligible for Employer provided short term disability, term life insurance, and AD&D insurance 401(k) retirement plan available Vehicle Allowance to contribute to personal vehicle expenses Phone and Laptop No Overnight Travel Paid Training Ability to compete for Pella's Presidents Club and additional awards A supportive and team-focused company culture Compensation ~$50k - $250k+ (total compensation) Equal Opportunity Employer: Pella Windows & Doors of CT-NY is an Equal Opportunity Employer. We are committed to creating an inclusive environment for all employees and applicants regardless of race, color, religion, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, disability, or any other protected status.

KBE Building Corporation: Relationships Are Everything! Join our team today!! KBE's relationship focus means that you can count on us to do the right thing at all times and work in the best interests of your project. We will be proactive and open in all of our communications and interactions with all members of your project team. Our clients, design partners, and trade contractors say they trust KBE to do the right thing - because we build relationships first, buildings second. Read on to see if this is the place for you!! At KBE, we expect the best - and reward it - with excellent compensation and benefits, challenging work, opportunities to learn and grow, and the chance to give back to our communities. Work Life Balance: 3 O'clock Fridays Options for select positions Flexible Work Hours Paid Paternal/Maternal Leave Vacation, sick, and personal time Paid Holidays Floating Holidays Health and Wellness: Medical and Dental Insurance (Premium cost sharing between the company and employee) Health Incentive Insurance Discount Employee assistance program Vision Care (100% company paid) Corporate Culture: Annual Company Meetings, Company Fun Events, & holiday parties Recreational/Chill-Out Space to encourage movement and collaboration: Golf Simulator, Pool Table, Dart Boards, Coffee/Snack/Beverage Station, breakout rooms, privacy booths, and more (Farmington office) Quarterly Employee Photo Contests - with prizes! Company swag! Mugs, Clothing, Backpacks, and more Dress code: Business Casual and Philanthropy Fridays (Jeans) Employee Work Anniversary Recognition Corporate Commitment to Philanthropy -************************** and company-sponsored charitable events Compensation: Competitive Salaries Employee Referral Bonuses Corporate Contributions toward Monthly Student Loan Repayment Reimbursement for select gym and fitness memberships Tuition Reimbursement for Work-Related Education Company Paid Life Insurance Structured Bonus Program How is this starting to sound!? Are you the next KBE employee!? Apply today! Position Summary: The Preconstruction Manager is involved in identifying opportunities, soliciting, and relating to potential clients, and participating in the preparation of KBE's submissions in response to solicitations and follow up interviews/presentations. The Preconstruction Manager also manages preconstruction services on projects secured by KBE; works with the Operations group to ensure a smooth transition into the construction phase; and supports Operations during construction in regard to the decisions and commitments made by KBE during the preconstruction phases. Supervisory Responsibilities: Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include training employees; planning, assigning, and directing work; appraising performance; addressing complaints and resolving problems. Key Responsibilities and Essential Functions: Prepare Qualifications & Exclusions, and site-specific construction related information/analysis needed to support these submissions. Once a design/build project is secured, the Preconstruction Manager will be responsible to manage/supervise the Preconstruction Phase of Services including but not limited to the following: Gather, calculate and compile data (unit costs, subcontractor quotes) for use in conceptual bid proposal estimates. Prepare routine estimates and constructability reviews under general supervision. Prepare bid packages, conceptual estimates, analysis of subcontractor bids, etc. for projects of size and/or complexity, as assigned. Interface with owner, architect, engineers and subcontractors to provide engineering and cost data regarding project feasibility. Write exhibits identifying exclusions and qualifications custom tailored for each project. Prepare preliminary project schedules tailored for each project Site Logistics Education, Experience, and Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Bachelor's Degree and 10+ years of related experience Proficiency required in: Microsoft Word, Project, and Excel Proficiency encouraged in the use of Microsoft PowerPoint, AutoCAD, Bluebeam and BIM software. KBE Building Corporation is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability or protected Veteran status KBE is a VEVRAA Compliant Federal Contractor.

Job DescriptionBenefits: Flexible schedule American Direct Logistics ******************************** is a National Final Mile Delivery and Assembly company. We are currently looking for Independent Contractors with the ability to deliver and install RTA furniture and fitness equipment. We have immediate openings in your geographical area. If you currently provide these services, this is an excellent opportunity to add additional revenue to your weekly earnings. The Opportunity: IC is to deliver and install RTA furniture & fitness equipment in customers home. Supplemental income (no routed work) Flexibility to schedule jobs based upon your schedule. Growth opportunity Responsibilities: Contact customer to schedule delivery/installation appointment. Picking up freight from your local warehouse Delivering and assembling product to our customers homes Provide trash removal from installation site Job Requirements: Cargo van, sprinter van, box truck (up to 16) Delivery & Assembly experience required (minimum 2 years) 2 man team (ICs must have their own helper, we do not hire helpers) Valid drivers license, vehicle registration and vehicle insurance Excellent communication skills (must speak fluent English) Smart phone Able to pass a background check Earnings Potential- $500-$1500 Weekly Direct Deposit Flexible Schedule Third Party Insurance Provider Available (commercial auto, general liability, cargo) We will send you our introductory email that will get you started with our hiring process once you submit your application.

KBE Building Corporation: Relationships Are Everything! Join our team today!! KBE's relationship focus means that you can count on us to do the right thing at all times and work in the best interests of your project. We will be proactive and open in all of our communications and interactions with all members of your project team. Our clients, design partners, and trade contractors say they trust KBE to do the right thing - because we build relationships first, buildings second. Read on to see if this is the place for you!! We are currently hiring for a Project Superintendent. At KBE, we expect the best - and reward it - with excellent compensation and benefits, challenging work, opportunities to learn and grow, and the chance to give back to our communities. Work Life Balance: Paid Paternal/Maternal Leave Vacation, sick, and personal time Paid Holidays Floating Holidays Health and Wellness: Medical and Dental Insurance (Premium cost sharing between the company and employee) Health Incentive Insurance Discount Employee assistance program Vision Care (100% company paid) Corporate Culture: Annual Company Meetings, Company Fun Events, & holiday parties Recreational/Chill-Out Space to encourage movement and collaboration: Golf Simulator, Pool Table, Dart Boards, Coffee/Snack/Beverage Station, breakout rooms, privacy booths, and more (Farmington office) Quarterly Employee Photo Contests - with prizes! Company swag! Mugs, Clothing, Backpacks, and more Dress code: Business Casual and Philanthropy Fridays (Jeans) Employee Work Anniversary Recognition Corporate Commitment to Philanthropy -************************** and company-sponsored charitable events KBEYOU- Focusing on our company growth with career development and training Compensation: Competitive Salaries Employee Referral Bonuses Corporate Contributions toward Monthly Student Loan Repayment Reimbursement for select gym and fitness memberships Tuition Reimbursement for Work-Related Education Company Paid Life Insurance Structured Bonus Program How is this starting to sound!? Are you the next KBE employee!? Apply today! Summary: Supervises and directs activities of workers concerned with construction of buildings or other construction projects to ensure conformance with contract documents and quality control by performing the following duties personally or with the effective organization of work through subordinate subcontractors/supervisors. Key Responsibilities and Essential Functions: Primary responsibility for the proper scheduling of the work of crews, equipment and subcontractors to achieve maximum production in the most efficient manner. Includes the following. Other duties may be assigned. Set up, maintain, and close field office and ensure that the project is secure at all times; Identify potential issues in the plans and specs (i.e. items with long lead times, etc.) and alert the Project Manager; Demonstrates general understanding of financial implications of decision making, bumps in schedule; Perform project start up and ensure project layout is accurate; Assist with the development of project schedules for specific scopes of work and work to identify issues/ provide solutions; Participate in weekly team meetings; Verify that mock-ups match the specs and are approved before any material is installed; Ensure work-in-place is installed per plans and specs and QC is adhered to the standards of the construction industry; Work with PM to ensure that 3-week look-ahead is up-to-date, provide input. Submit, monitor and update 3-week look-ahead schedule with on-site staff and subcontractors weekly; Conduct weekly Subcontractor/ Foreman meetings; Maintain Subcontractor Badging Program daily; Conduct safety meetings and ensure that all safety regulations are followed by the company and subcontractor crews. Collect safety meeting attendance sheets from subcontractors; Conduct and document pre-installation conferences; Create, review submittals (identify compliance/ specifications) and maintain the project submittal log with the project engineer; Maintain a rolling punchlist weekly and complete punchlist and close-out in a timely fashion; Maintain a project closeout checklist leading up to C of O; Maintain all jobsite documentation: ensure all subs provide proof of insurance and review status for expiration dates, complete all daily reports and logs, review subcontractor invoices and provide documentation and backup for resolution of subcontractor claims; Work with PM weekly regarding Subcontractor P.L.O. issues; Commit to subcontractor's/ KBE for the proper back-up for PCO or deduct change orders; Maintain as-built drawings on-site weekly; Use of Back charge notifications and log; Use of safety notifications and log; Maintains and creates good relationships with subcontractors, architects and owners; Maintain required company safety recertification/ training; Education, Experience & Qualifications: 5+ years of construction industry experience; Have a general understanding of most project types/ delivery methods/ phased and non-phased projects. Generally strong in 1-2 areas; (Retail, Apartments/Condos, Higher Education, Healthcare/Medical, Senior Living, K thru 12 Schools, Federal, Mixed Use) Successfully completed at least two projects with a construction value over $2 million. Thorough understanding of and following of plans and specifications in the construction of projects; Experience in controlling job costs and adhering to progress schedules; Solid experience in Blueprint reading and understanding of schedule logic; General understanding of multiple divisions, seeks input on MEP trades; Ability to manage and motivate subcontractors and coordinate construction teams Adept at using software programs such as MS Office Suite (Excel, Outlook, etc) and other jobsite software KBE Building Corporation is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability or protected Veteran status KBE is a VEVRAA Compliant Federal Contractor.

Reports To: Mitigation ManagerWhat does a Water/Fire/Mold Cleaning Laborer with Paul Davis do? Serve others within your community in their time of need Make a difference for others that have had a disaster strike their property Work hard and take pride in completing projects (i.e. mitigating flood and fire damage) Be empathetic and show a sense of urgency while communicating through modern technology Why Join The Team? Paul Davis is an industry leader in restoration and reconstruction for insurance providers and commercial properties throughout the United States and Canada. We are growing locally and have career opportunities for individuals who want purpose out of their work. We love creating an opportunity for our team members, providing industry training and giving technicians the opportunity to become experts in the field through certifications and Paul Davis University.Built upon principles of customer service, dynamic decision-making and leadership, we have the tools to continue our rapid growth. Our team puts emphasis into living our Vision, Mission and Values to be more than just a service provider - our Water/Fire/Mold Cleaning Laborers are on the front lines of restoring their communities by being first on site after disasters strike (i.e. floods, fires) and will be leading the mitigation effort to restore the property. Values: Deliver what you promise. Respect the individual. Have pride in what you do. Practice continuous improvement. Vision: To provide extraordinary care while serving people in their time of need. Mission: To provide opportunities for great people to deliver Best in Class results. Why The Team Needs You? Serving others after a disaster has struck their property is not easy. Everyone within Paul Davis needs to have a world-class work ethic, serious attention to detail and love to help people. It is challenging to make customers happy when faced with a traumatic event but you will love being a technician if you take pride in your work and have fun while working with others. Team Compensation and Benefits: Leadership Development - our company grows from the inside. If you are determined and motivated enough, ask about participation in our leadership development initiative to grow your career and explore new opportunities Monthly cross-training opportunities to advance your career Flex schedule - at Paul Davis we are committed to our team and their well-being. We have instituted the ability for flex hours that ensures team members get the time they need for personal matters while still being able to work full time. Paid training Health, dental and vision insurance Bonus program for performance Referral program Great culture and team dynamic Hourly pay: $18.00 to $23.00/hour based on experience and certifications Team Qualifications (Requirements): Desire to join a world-class team and contribute a positive attitude Dedication to customer service Fluent in English Valid driver's license with a clean record Have the ability to work nights/weekends and overtime, if needed Ability to lift 75 LBS frequently Desire to continually learn new things Role on the Team (Job Responsibilities): High level performance of water mitigation, tarping, board up, mold remediation, asbestos/lead abatement and carpet cleaning/reinstallation services according to Paul Davis and industry specifications under the supervision of the Mitigation Manager. Focus and dedication to providing excellent customer service. Maintain a clean, properly stocked and organized truck and maintain all company equipment. Be accessible by phone and participate, as necessary, in the on-call schedule. Assist in warehousing and facility related tasks when necessary. You will assist other team members as you see opportunities arise and be a leader for the team when needed. Please apply if you think you have what it takes to serve others and deliver a world-class service when others need it the most. We are looking forward to discussing this opportunity with you.We support and hire Veterans and we are an Equal Opportunity Employer! Compensation: $18.00 - $23.00 per hour Since 1966, Paul Davis has been an industry leader in the areas of property damage mitigation, reconstruction and remodeling. With more than 370 offices in our franchise network, the company serves residential, institutional, and commercial customers and clients across the United States and Canada. We have built our heritage one project at a time, establishing a reputation for performance, integrity and responsibility among customers and carriers alike. Whether property damage is caused by water, fire, smoke, storms or other disasters, we deliver on our promise to deliver excellence, expertise and a customer experience that is second to none. At Paul Davis, our passion for quality drives everything we do. Our Vision: To Provide Extraordinary Care While Serving People In Their Time Of Need. Our Values: Deliver What You Promise Respect The Individual Have Pride In What You Do Practice Continuous Improvement Our Mission: To provide opportunities for great people to deliver Best in Class results

At Encore Fire Protection, we are proud to be the east coast's largest full-service fire protection company, serving over 90,000 customers from Maine to Louisiana. With a team of over 2,200 dedicated employees, we provide innovative, customized fire suppression, fire sprinkler, and fire alarm solutions that protect lives and properties every day. Our goal is to deliver superior experience to those who trust us to safeguard what matters most. We are passionate about continuous growth, innovation, and maintaining a culture that thrives on success and commitment to safety. Our mission? To be the best fire protection company the industry has ever seen. What You'll Do: The Data Integrity Specialist plays a key role within our Operations team, focusing on maintaining the accuracy and integrity of our data systems. This is an excellent opportunity for someone with foundational office experience who is looking to further develop their skills and grow within a dynamic and supportive organization. As a Data Integrity Specialist, you will have the opportunity to work cross-functionally with Operations, Sales, Finance, Business Intelligence, and IT, contributing to projects that impact the entire organization. Key Responsibilities: Data Management: Administer, maintain, audit, and manage incoming data to ensure compliance with internal procedures and alignment with company standards. Error Identification: Identify discrepancies in contracted work, invoicing errors, and timecards, and take corrective action as needed. Reporting: Create, optimize, and monitor various reports that reflect performance within service lines and divisions. Project Management: Participate in or manage small to medium-sized projects, collaborating with stakeholders across different levels of the organization. Process Improvement: Implement new processes and support functional departments as a subject matter expert, providing insights and recommendations for improvements. User Support: Serve as a frontline resource for technicians and operations teams, providing support and troubleshooting assistance for issues related to ERP systems and other internal applications. What We're Looking For: A college degree in a related field or similar experience required. At least 2 years of office experience, especially in a data-focused role. Advanced skills in Microsoft Excel (you should be comfortable with complex formulas and data visualization). Initiative to investigate deeper into data when unexpected results are uncovered. Good with technology and quick to learn new tools. Experience using a ticketing system to manage and resolve requests on time. Strong problem-solving skills and the ability to spot trends in data. Able to work well both independently and with a team. Capability to work under pressure and meet deadlines. Nice to Have: Experience in the fire protection industry or a similar field. Familiarity with data management and reporting tools. Working Environment: Mostly in-office work, with occasional off-site meetings Remote work must be approved by Supervisor in advance. Must be comfortable sitting for long periods and working at a computer. What We Offer: Competitive salary based on your experience. Opportunity for performance-based bonuses. Full benefits package, including medical, dental, vision insurance, 401(K) with employer match, and company-paid life insurance. Casual dress code-jeans most days, suits when needed. Coffee, tea, and weekly office lunches. What We Offer: At Encore, we're all about creating a culture where success is celebrated. We recognize that our work makes people's lives safer, and we reward those who contribute to our growth. Here's what you can expect: Competitive Salary: Compensation commensurate with your experience, with the opportunity to earn performance-based bonuses tied to your personal effectiveness and contributions to the team. Purpose-Driven Work Environment: We believe in working smarter, not harder. You'll be part of a culture that values results, and we empower our team to focus on impactful work. Flexible Dress Code: Upon joining, you'll receive branded Encore gear and we believe in dressing for the objective, not the occasion. Most days, you can enjoy a casual work environment, but we'll dress up when the situation calls for it. Innovative Culture: We encourage a culture of experimentation and improvement. You'll have the freedom to express your ideas and be part of a company that is always looking to improve and grow. Tools for Success: Access to leading-edge web-based productivity tools. Health and Wellness: Comprehensive medical, dental, and vision coverage through Blue Cross to keep you and your family healthy. Retirement Planning: Participation in our Fidelity 401(k) plan with a company match, helping you save for your future. Life Insurance: Company-paid life insurance policy of $50,000 to give you peace of mind. Encore Fire Protection is an Equal Opportunity Employer. Encore Fire Protection is an E-Verify Employer. As an EEO/AA employer, Encore Fire Protection considers applicants for employment without regard to, and does not discriminate based on gender, sex, sexual orientation, gender identity, national origin, age, race, protected veteran status, disability, or any other legally protected status. #LI-LP1

Looking to start your career in HVAC? Total Mechanical Systems, part of the renowned Apex Service Partners network, has an exciting opening for an HVAC Apprentice. This is a hands-on opportunity to work side-by-side with the best technicians and installers in the industry, learning the trade and developing the skills necessary to become a top HVAC professional. With over 20 years of trusted service, Total Mechanical Systems provides a pathway for growth within a company known for its innovation, excellence, and strong commitment to both employees and customers. If you're eager to learn and ready to launch your HVAC career, this is the opportunity for you! Job Responsibilities * Hands-On Training - Work closely with experienced HVAC technicians and installers to learn the trade through real-world experience * Residential HVAC Install Support - Assist in the installation of heating, ventilation, and air conditioning systems in residential homes * Material & Equipment Handling - Help with parts, tools, deliveries, and setup at job sites to ensure a smooth installation process * Tool Operation - Safely operate a variety of hand and power tools while adhering to safety protocols * Physical Labor - Perform tasks that require dexterity and the ability to lift 50 lbs. * Regulatory Compliance - Ensure HVAC systems meet all industry standards and local building codes * Service Assistance - Support technicians with troubleshooting, maintenance, and repairs of HVAC systems * Customer Interaction - Learn how to communicate effectively with customers, assisting with service explanations and recommendations * Record Keeping - Assist in documenting job progress, service details, and work orders in Service Titan software Qualifications * Eagerness to Learn - Passion for HVAC and a willingness to develop skills through hands-on training * Mechanical Aptitude - Basic understanding of HVAC systems or general mechanical experience is a plus * Physical Fitness - Ability to lift up to 50 lbs. and perform physically demanding tasks * Tool Knowledge - Familiarity with hand and power tools used in HVAC installation and repair * Communication Skills - Strong listening and communication skills to work effectively with a team and customers * Attention to Detail - Ability to follow instructions precisely and adhere to industry regulations * Driver's License - Valid driver's license with a clean driving record Benefits * Medical, Prescription, Dental, and Vision Insurance - Comprehensive coverage with minimal out-of-pocket expenses * Disability & Term Life Insurance - Financial security for you and your loved ones * Matching 401(K) Benefits - Competitive retirement savings plan to help secure your future * Ongoing Training & Development - Learn from industry experts and gain the skills needed to grow your career * Paid Holidays & PTO - Paid time off for holidays and generous paid time off for work-life balance Total Mechanical Systems may conduct a pre-employment background check and drug test, subject to applicable laws. Join our team at Total Mechanical Systems in Plainville, CT, a company with over 20 years of trusted service, and take the first step toward becoming a skilled HVAC technician. Apply today and start your career with a leading home services provider as part of the Apex Service Partners network! Total Mechanical Systems is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Posted Min Pay Rate USD $18.00/Hr. Posted Max Pay Rate USD $25.00/Hr.

Paint Sales/Stock and Delivery Floater (Madison/New London/Niantic/Branford) Ring's End, Inc. is seeking a determined full-time Paint Sales/Stock and Delivery in the New Haven/Eastern CT Area in order to keep our paint operations running smoothly. This position earns a competitive pay and is eligible for great benefits, including traditional and Roth 401K, 3% 401K safe harbor company contribution, various medical insurance plans, FSA & DCA, employee discounts on our products and materials, life/accidental death & dismemberment insurance, long & short-term disability, paid holidays, paid time off (PTO), employee assistance program, and a legal counseling program. If this retail opportunity sounds like the right job for you, keep reading! Are you a hard worker who genuinely cares about your customers and will go out of your way to make them happy? Are you interested in teaming up with an established building material retailer to fortify your skills? If yes, complete our initial 3-minute, mobile-friendly application for this Customer Service / Sales Associate position because we want to meet you! ABOUT RING'S END INC We are a Connecticut-based lumber and building materials retailer serving Connecticut, South County, Rhode Island, and Westchester County, New York. We are a third-generation, family-run company with a rich history dating back to 1902. Guided by a tradition of service and a commitment to innovation, we are dedicated to becoming the premier resource in the building material industry for builders and remodelers, painting contractors, architects, and homeowners. Our growth and success are due to our team of professionals. We employ the best team in the industry, ensuring we maintain a diverse and evolving work environment that values cooperation and teamwork. We look for innovation and continuous improvement in everything we do. We're looking for more to join us! A DAY IN THE LIFE AS A PAINT SALES/STOCK AND DELIVERY As a Paint Sales Associate, you help in our paint centers to assist our customers with color choices and finishes. You are kept busy with various tasks, from keeping our paint center showrooms neat and clean, handling telephone calls, greeting and helping clients in the store, handling point-of-sale transactions, and creating purchase orders for products. This position requires the incumbent to sell paint, and paint accessories, keep shelves stocked, and deliver materials to contractors, builders and homeowners. The right candidate will be flexible and adaptable to the changes that quickly affect this job. Exceptional customer service and problem-solving skills are a must as well as a clean driving record. Fluent in English and Spanish is a plus! You feel accomplished using your knowledge and skills to help our clients! QUALIFICATIONS Duties include, but are not limited to: * Travel throughout various locations * Sell the maximum output of allotted products at authorized prices, and in accordance with established merchandising plans and policies * Correspond with regular customer contacts and potential customers promoting the sale of all Ring's End products * Instruct customers on use of products * Handle instances of consumer dissatisfaction and specific customer complaints fairly, promptly, and effectively, and recommend adjustments to management * Stock Shelves with appropriate merchandise * Deliver merchandise to customer homes and job sites Do you have a positive attitude that contributes to high company morale? Are you goal-oriented and self-motivated? Can you connect with our customers and build strong relationships? Are you an effective communicator? Do you present yourself professionally? If so, you may be perfect for this full-time retail position! Apply now!

Charter Contracting Company is hiring qualified personnel in the Connecticut Area! Charter is a growing Boston based non-union Civil/Environmental Remediation Contractor with jobsites throughout all of New England. Types of projects include but are not limited to environmental remediation, demolition, excavation, dredging, utility work, landfill cap and closures. Charter is currently looking to fill a Bulldozer Operator position at multiple Connecticut projects. The ideal candidate would have the following knowledge: 5-10 years construction experience Must at a minimum be able to operate a bulldozer Experience utilizing GPS machine control is a plus Possession of a valid CT hoisting license is required Possession of a valid MA hoisting license with 1C/2A designation is a plus Ability to read and interpret plans and construction drawings OSHA 10 Hour certification 40 Hour HAZWOPER training is preferred Must have a license and reliable transportation Ability to travel within New England is a plus Hourly Wage, with potential for additional overtime hours. Wage rate negotiated based on experience. While performing the duties of this job, the employee must be in good physical condition and endurance as they are regularly required to push, pull and lift more than 50 lbs. Ability to work aloft, climb ladders, staging/scaffolding and other aerial equipment. Long hours spent on your feet and working in various types of conditions (snow, rain, cold and heat to name a few). At times, will be required to perform work above your head and in tight quarters. Interested candidates should reply to this ad with their resume attached. Only candidates considered for interviews will be contacted. Charter Contracting Company, LLC is an Equal Opportunity/ Affirmative Action Employer and a Drug Free Workplace. This employer participates in E-Verify and will provide the federal government with your Form 1-9 information to confirm that you are authorized to work in the U.S. To learn more about Charter, please go to: ******************* Pay Range: $35 - $50 Hourly

Job Purpose: Responsible for sharpening various types of milling cutters, drills, taps, or turning tools as required, manufacturing special form relieved cutters, and maintaining inventory of cutter grinding supplies. Perform routine maintenance on equipment and determine when and what kind of maintenance is needed. Maintains quality standards and records quality results. Duties: Knowledge of raw materials, production processes, quality control, costs, and other techniques to maximize the effective manufacture of distribution of goods. Knowledge of machines and tools, including their designs, uses, repair, and maintenance. Be able to determine the kind of tools and equipment they will need to do the job properly. The skill to conduct tests and inspections of products or processes to evaluate quality or performance. Monitors gauges, dials, or other indicators to ensure a machine is functioning properly. Must be detail-oriented, meticulous, and have excellent communication skills. Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems. Have a full understanding of the implications of new information for both current and future problem-solving and decision-making. The Tool Grinder needs the ability to tell when something is wrong or is likely to go wrong. Needs the ability to concentrate on a task over a period of time. Needs the ability to apply general rules to specific problems to produce viable answers. Skills/Qualifications: Analyzing Information, Manufacturing Methods, and Procedures. Knowledge of GD&T beneficial Strong verbal and interpersonal skills, analytical and shop math skills, as well as working knowledge of Microsoft Excel Ability to use measuring equipment - calipers, micrometers, height gauges, indicators, depth gauges, & size blocks. It is the policy of this company to extend equal employment opportunities to all qualified employees without regard to race, color, religion, creed, marital status, learning disability, sexual orientation, national origin, sex, age, history of mental illness, mental retardation or physical, unless such disability prevents performance of the work involved. This policy applies to all phases of employment including, but not limited to, recruitment, hiring, placement, upgrading and promotion, transfer, layoff and recall, termination, selection for company sponsored training programs, rates of pay and other forms of compensation, use of facilities, and participation in all company sponsored activities.

KBEBuilding Corporation: Relationships Are Everything! Join our team today!! KBEs relationship focus means that you can count on us to do the right thing at all times and work in the best interests of your project. We will be proactive and open in all of our communications and interactions with all members of your project team. Our clients, design partners, and trade contractors say they trust KBE to do the right thing because we build relationships first, buildings second. Read on to see if this is the place for you!! At KBE, we expect the best and reward it with excellent compensation and benefits, challenging work, opportunities to learn and grow, and the chance to give back to our communities. Work Life Balance: 3 Oclock Fridays Flexible Work Hours Paid Paternal/Maternal Leave Vacation, sick, and personal time Paid Holidays Floating Holidays Health and Wellness: Medical and Dental Insurance (Premium cost sharing between the company and employee) Health Incentive Insurance Discount Employee assistance program Vision Care (100% company paid) Corporate Culture: Annual Company Meetings, Company Fun Events, & holiday parties Recreational/Chill-Out Space to encourage movement and collaboration: Golf Simulator, Pool Table, Dart Boards, Coffee/Snack/Beverage Station, breakout rooms, privacy booths, and more (Farmington office) Quarterly Employee Photo Contests - with prizes! Company swag! Mugs, Clothing, Backpacks, and more Dress code: Business Casual and Philanthropy Fridays (Jeans) Employee Work Anniversary Recognition Corporate Commitment to Philanthropy ************************** and company-sponsored charitable events Compensation: Competitive Salaries Employee Referral Bonuses Corporate Contributions toward Monthly Student Loan Repayment Reimbursement for select gym and fitness memberships Tuition Reimbursement for Work-Related Education Company Paid Life Insurance Structured Bonus Program How is this starting to sound!? Are you the next KBE employee!? Apply today! Position Summary: The Scheduling Manager will supervise the production of detailed project schedules. Updates and reports on the progress to the operations team. Key Responsibilities and Essential Functions: Includes the following, other duties may be assigned. Preliminary Considerations Understand and recommend the project delivery system and most appropriate scheduling method, calendar and software platform. Determine whether external scheduling resources are needed or desired. Evaluate contract requirements for delay-causing requirements and notifications. Review pre-bid schedule requirements and help develop qualifications and exclusions to include in bids and proposals. Develop Base Line Schedule Generate project specific detailed schedules with input from project team or others as necessary and appropriate. Consider activities/responsibilities from other parties. Prepares forecasts for future construction performance. Prepares written schedules for Sr. Management, Marketing and/or Pre-construction to present at client meetings. Project Schedule Frequency Updates Obtain project specific information from the project team once a month or as outlined in the specifications and make minor changes/updates to the schedule as needed. Update Process Visit jobsites and/or video conference to record current status, percent complete, and approximate quantities of materials in place with project teams. Meet with field staff or others to address any actual starts or finishes that could not be obtained from the field walk or video conference. Insert lost days due to weather or project impacts. Consider all notice requirements for relief from time, cost impacts or LCOs. Maintain files in a project folder, organized and clearly marked. Analyze scope changes using collected information. (3) Week Look Ahead Schedule Spot check (3) week look ahead schedules to add detail and update the overall project schedule for areas of focus in the coming weeks for our subcontractor and our clients. Design Impacts & Manage Schedule Impacts Tie critical path scopes of work to their corresponding design deliverable package followed by procurement and construction activities. Explore all reasonable avenues available to prevent or minimize schedule impacts with subcontractor. Access delay logs in BIM 360 to flush any potential issues with project team. Prepare time-impact analyses for change orders and delays as requested. Track the cost and impact of acceleration or other mitigation efforts with project team. Miscellaneous Answers construction related scheduling questions from the project teams. Reports construction progress to Sr. Management and the client as requested. Train other persons on the project teams in the proper use of scheduling techniques and documentation. Perform occasional quality control audits on schedules, processes and procedures. Develop lessons learned from past and ongoing projects, for future use. Education, Experience & Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. BS in Construction Management or Engineering Technology and 5-7 years of building construction experience years of construction administrative experience. Or 2+ years of administrative construction industry experience and/ or construction industry course work beyond secondary school. Basic understanding of construction principles and practices Excels with technology Experience with BIM and LEED is beneficial Proven skills and ability in organization, time management, flexibility, sense of urgency, professionalism with both clients and co-workers, and attention to detail Perform other duties as required and assigned by Marketing, Pre-construction, Legal or Operations. KBE Building Corporation is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability or protected Veteran status KBE is a VEVRAA Compliant Federal Contractor.

This posting is for our 2026 cohort. Are you looking for a way to jumpstart your career in the logistics, distribution, sales, or construction industry? At Colony, our Distribution Leadership Program (DLP) role develops leaders through an immersive rotational experience with hands-on field work and supplemental leadership development. Colony will provide you with the foundation to build a long-term successful career. As a program participant, you can look forward to: * Access to senior leadership through quarterly discussion * Mentorship opportunities both on the peer and senior leadership level * Dedicated support from our HR team As a future leader at Colony, you will be building relationships and developing the skills, techniques, and knowledge to lead your team to success for years to come. A little about your day: * As a participant in our 30-week rotational Distribution Leadership Program, you will have the opportunity to begin your training experience in one of our training branch locations, where you will work with some of the most experienced and successful distribution management teams in our industry. * In the first 15 weeks of your program, your goal is to learn how our products move through the warehouse and get to our customers. You will work hands-on with our teams in your assigned branch location, including: * Receiving and stocking * Picking and packing * Inventory control * Dispatch and delivery (including driver ride alongs) * Forklift operator training * Operations management * In the second 15 weeks of your program, you will continue at your assigned branch and move through rotations in the following focus areas: * Purchasing * Inside sales * Counter sales * Outside sales * Branch management Throughout your program, you will have opportunities to travel to branches within the Colony network to give you an immersive experience in operations and sales to better understand how different branches function. What you'll need to have for success: * A bachelor's degree in business, logistics, supply chain, professional sales, marketing, or a related field is required * Must be open to extended travel and relocation * Attention to detail mindset * A desire for providing exceptional customer service More about the program: The overall focus of the rotational program is for you to gain an understanding of the broader Colony business model. As a DLP participant, you are considered a full-time, exempt employee. Upon completion of the Program, the Employer may present the DLP candidate with a job offer best aligned with their skillset and the Employer's business needs. Colony will provide financial assistance for you as you move through the program, allowing you to work in one or more of our branch locations. Life at Colony With 50 locations in 20 states and over 1,100 employees, Colony Hardware is the leading distributor of tools, equipment, fasteners, supplies, and safety products to commercial construction and industrial accounts throughout our markets. Our customers can count on us for same or next-day delivery of over 30,000 products from the top names in the industry right to their job site with no minimum order requirement. At the heart of what we do is building long-term, meaningful relationships. At Colony, our people are our most valuable asset. Success as a Colony Associate means being reliable, conscientious, and passionate. With our direction centered on teamwork, every employee at Colony will not only find their work to be meaningful but will have the opportunity to grow alongside Colony, both professionally and personally. Colony's Commitment to Equal Opportunity: Colony Hardware Corporation is an equal opportunity employer. We enthusiastically accept our responsibility to make employment decisions without regard to race, religious creed, color, age, sex, sexual orientation, national origin, citizenship, religion, marital status, victim of domestic violence, familial status, genetic predisposition or information, disability, Family and Medical Leave, military or veteran status, citizenship, pregnancy, childbirth and related medical conditions, or any other classification protected by federal, state, and local laws and ordinances. Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment. Salary range: $60,000.00 to $65,000.00 per year based upon experience and location.

Immediate Hiring Opportunity for Cable Splicer Paid Training Included! Install and repair cable TV, high-speed data, and digital services outside of residential and commercial sites. Identity technical issues while troubleshooting equipment and determining cable signal. The candidate will be responsible for performing tasks associated with the aerial and underground electronic upgrade and splicing of coaxial cable for cable television systems. Our company prides itself on providing continuous training to our technicians to keep them proficient in the latest technologies. Training combined with efficient effective equipment make the technicians in the Splicing department at Buckley Cable Construction the best in their field. Buckley Cable Construction is an Essential Workforce and we are looking to hire (6) Coax Splicers.

The Contingency Management Coordinator supports client engagement and serves as a liaison between the agency and the Department of Mental Health and Addiction Services ensuring accurate and timely communication. This position provides timely and accurate completion of all DHMAS-related correspondence, reporting and data entry as required by program, and may maintain data as required. SALARY: $48,000 EDUCATION AND EXPERIENCE/QUALIFICATIONS High School diploma with 2 years of progressively responsibly work experience is required. Bachelor's degree strongly preferred. Demonstrates attention to detail, accurate, thorough and persistent follow through with all activities and able to respond professionally at all times through written and verbal communication. Demonstrated ability to collaborate and function as a part of an integrated care team demonstrating knowledge and application of the principles and best practices in care integration. Demonstrated ability to maintain therapeutic boundaries. LOCATION Hartford, CT SCHEDULE Full time EMPLOYEE BENEFITS At Wheeler, we're committed to not only supporting your career growth but also ensuring your well-being and security. Here's how we invest in you: Nurture Your Health: Comprehensive medical and prescription insurance through Centivo Comprehensive dental and vision insurance through Cigna Access to wellness programs to support your physical and mental health Secure Your Future: Enjoy peace of mind with company-paid life and AD&D insurance 403(b) Plan, with contributions from the company Fuel Your Career Growth: Pursue your educational goals with our Education Reimbursement Program Access training and development opportunities Receive a productivity incentive to recognize your hard work and dedication Maintain Work-Life Harmony: Recharge with generous paid time off, including: 15 vacation days per year to explore and recharge 8 sick days per year for your well-being 2 personal days per year for your personal needs 2 floating holidays per year to celebrate what matters to you 9 paid company holidays to spend with loved ones Access free and confidential counseling through our Employee Assistance Program (EAP) ESSENTIAL DUTIES AND RESPONSIBILITIES Serves as liaison between the program and the DHMAS referral source, point of contact for the referral source and provides information as requested. Coordinates with clinical/program staff, referral sources and clients to support enhanced engagement and retention of clients. Completes toxicology tests at the prescribed frequency for each client. Documents results immediately in Wheeler's electronic health record, and any system required through DHMAS. Provides outreach and support to the difficult-to-engage clients by phone calls and texts, if appropriate. Demonstrates knowledge of internal and external levels of care, referral processes and resources. Makes clinically appropriate referrals for identified service needs in a timely manner. Meets direct service productivity goals as defined by program. Demonstrates knowledge of program/department/agency goals and target outcomes, and adheres to practice standards and to data collection and reporting protocols. Completes all trainings specifically related to CM implementation, utilizing best practices by adhering to model fidelity and program expectations. Greets clients in a professional manner, providing clear explanation of program guidelines, and provides other assistance, as needed, to support client accountability. Maintains accountability to ensure administrative functions and daily procedures are prioritized. Provides timely and accurate data entry, adhering to contract guidelines. Performs routine administrative duties including but not limited to copying, mailing, filing, faxing and processes and follows up on various results as needed. Obtains and verifies releases to maintain timely communication with referral sources. Attends team meetings and participates in client centered, strengths-based presentations/discussions. Coordinates with Director of Behavioral Health in facilitating all state and funder requirements. Fosters positive, professional relationships with referral sources. Attends meetings with referral sources as requested. Continues to develop knowledge and understanding about the history, traditions, values, family systems, and artistic expression of groups served as well as uses appropriate methodological approaches, skills, and techniques that reflect an understanding of culture.

The Pipe Welder will participate in the installation or maintenance and inspection of HVAC, Utility and Process piping systems. Regular attendance at assigned location; may include the A/Z fabrication facility or other project sites; Works on systems that include Heating Hot Water, Chilled Water, Steam, Condensate, Compressed Air, Process Fluids, Chemical, Fuel Oil, Gasses, and other related systems; Works with materials that include carbon steel, stainless steel, plastics, fiberglass, copper, (brazed, soft soldered and pro-press); Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding. Remove rough spots from work pieces, using portable grinders, hand files, or scrapers. Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. Weld pipe and components in flat, vertical, or overhead positions using open root butt weld, socket weld and/or fillet weld. Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding. Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment. Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. Examine work pieces for defects and measures work pieces with straightedges or templates to ensure conformance with specifications. Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreignmatter. Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material. Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals. Fill holes, and increase the size of metal parts. Detect faulty operation of equipment or defective materials and notify supervisors. Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques. Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained. Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools. Clean or degrease parts, using wire brushes, portable grinders, or chemical baths. Mark or tag material with proper job number, piece marks, and other identifying marks as required. Position and secure work pieces, using hoists, cranes, wire, and banding machines or hand tools. Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations. Dismantle metal assemblies or cut scrap metal, using thermal-cutting equipment such as flame-cutting torches or plasma-arc equipment. Preheat work pieces prior to welding or bending, using torches or heating furnaces. Hammer out bulges or bends in metal work pieces. Develop templates and models for welding projects, using mathematical calculations based on blueprint information. Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments. Cut, contour, and bevel metal plates and structural shapes to dimensions as specified by blueprints, layouts, work orders, and templates, using powered saws, hand shears, or chipping knives. Estimate consumable materials needed for production and manufacturing and maintain required stocks of materials. Set up and use ladders and scaffolding as necessary to complete work. Use fire suppression methods in industrial emergencies. Detect faulty operation of equipment or defective materials and notify supervisors; Direct helpers or apprentices in appropriate tasks; Must maintain strict adherence to safety rules and quality; Participate in site housekeeping; Interact with co-workers in an attentive courteous manner; Additional duties as directed by management. SKILLS & EXPERIENCE/REQUIREMENTS: Ability to work independently or as part of a team; Experience: 5 years of Field Experience, trade school or apprenticeship; Knowledge of materials, methods and tools involved in industrial construction; Attention to detail; Ability to keep hand and arm steady; Be highly focused on customer satisfaction expectations; Good documentation and record keeping; Preparation of miscellaneous paperwork including time sheets, daily reports and material requests; Competency in Permit Required Confined Space; Understanding of and strict adherence to daily Job Hazard Analysis (JHA); Appropriate state certification or license; OSHA 10 certification. PHYSICAL DEMANDS & WORK ENVIRONMENT: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. PHYSICAL DEMANDS: Ability to perform tasks in all aspects of construction sites; ability to climb ladders and crawl as needed; ability to work from aerial lifts; ability to lift and manipulate objects of up to 50 lbs. WORK ENVIRONMENT: Industrial manufacturing facilities Power generating facilities Chemical manufacturing Healthcare & Institutional Pharmaceutical facilities including GMP - Aseptic and non-Aseptic Areas and Non GMP Areas Commercial and offices spaces

Job Title: Construction Project Engineer Intern Duration: Summer 2026 About Us: Wohlsen Construction Company is seeking dynamic and driven current juniors for our highly structured summer internship program. Our program is designed to immerse you in real-world projects, providing invaluable experience and mentorship. We're committed to your growth and aim to transition exceptional interns into full-time Wohlsen Teammates upon graduation. Responsibilities: As a Construction Management Intern, you will: Collect, review, and process project documentation, including Submittals and RFIs, and ensure timely distribution. Draft meeting minutes, memos, and correspondence for various stakeholders. Coordinate and oversee the bid package process, ensuring comprehensive quote coverage. Assist in preparing, distributing, and monitoring project billings (draws) to completion. Maintain accurate project files, including logs for change orders, permits, submittals, RFIs, etc. Collaborate with the Project Manager in developing, monitoring, and updating project schedules. Manage project close-out documents, including O & M manuals. Champion a culture of safety, developing and communicating project safety programs, and participating in inspections. Willingness to travel to project job sites, potentially requiring overnight stays. Qualifications: Pursuing a degree in Construction Management, Engineering or related disciplines Proficiency in Microsoft Office (Word, Excel, Outlook, PowerPoint). Familiarity with Primavera Scheduling, SureTrak, MS Project, Timberline, and CMiC (a plus). Valid driver's license and ability to travel. Strong writing, editing, proofreading, spelling, and grammar skills. *Note to Recruiters, Placement Agencies, and Similar Organizations: Wohlsen does not accept unsolicited resumes from agencies. Please do not forward unsolicited agency resumes to our website, locations, or to any Wohlsen team member. Wohlsen will not pay fees to any third-party agency or firm and will not be responsible for any agency fees associated with unsolicited resumes. Unsolicited resumes received will be considered property of Wohlsen and will be processed accordingly. It is the policy of Wohlsen Construction to provide equal employment opportunities without regard to race, color, religion, sex, national origin, age, disability, marital status, veteran status, sexual orientation, gender, gender identity, genetic information, pregnancy, or any other protected characteristic under applicable law. This policy relates to all phases of employment, including, but not limited to, recruiting, employment, placement, promotion, transfer, demotion, reduction of workforce and termination, rates of pay or other forms of compensation, selection for training, the use of all facilities, and participation in all company-sponsored employee activities. The information contained herein is not intended to be an all-inclusive list of the duties and responsibilities of the job, nor are they intended to be an all-inclusive list of the skills and abilities required to do the job. This job description does not constitute a contract of employment and Wohlsen Construction may exercise its employment at-will rights at any time.