Inspector jobs at Universal Engineering Sciences - 694 jobs

PETROLEUM INSPECTOR - Los Angeles, CA Salary Range (Hourly): $24.00 - $38.00 SUMMARY: Oil and Petroleum Inspectors visit client facilities, including barges and ships, shore tanks, railcars, and tank trucks for quantity surveys of a variety of commodities including petroleum and petrochemicals inspection and collects samples for laboratory analysis. ESSENTIAL DUTIES AND RESPONSIBILITIES: Include the following: Other duties may be assigned. Maintain a Valid Drivers License and a working vehicle (car or truck, no motorcycles) at all times * Receives orders, obtains information, and gathers paperwork from Operations Supervisor(s) on movements. * Ensures that all equipment is in good operating condition - calibration verification, correct and clean. This includes safety and monitoring equipment appropriate to the job. * Reports to job-site punctually and observes all applicable company federal and state regulations and standards, Terminal, Refinery, and/or vessel requirements, including safety and measurement standards. * Attends "Key Meetings" with external personnel ashore and/or abroad. Represents the Company by appearance and conduct. Behaves ethically at all times. * Communicates any problems, discrepancies, or other noteworthy incidents to the Operations Supervisor and/or Dispatcher without delay * Obtains samples, gauges shore tanks, vessel(s), barge(s), railcar(s), and/or tank truck(s) as specified per job order. * Labels sample containers with full and correct identifying data, including location of sample, material, type of sample, safety information, time collected, etc. * Promptly and accurately calculates quantities and completes all required paperwork and distributes copies appropriately. * Promptly and safely delivers samples to the laboratory for analysis or turn in for retain, or client facilities for analysis or retain. * Reviews any discrepancies with Operations Supervisor, signs and returns job order form. * Maintains a 24-hour on-call status. Supports and participates in the Company's Business Management System (BMS). Attends company meetings as required. SUPERVISORY RESPONSIBILITIES: None QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: High school diploma or general education development certificate (GED). Knowledge of company HS&E procedures and associated governmental regulations. LANGUAGE SKILLS: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. REASONING ABILITY: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagrammatic form. Ability to deal with problems involving variables in standardized situations. CERTIFICATES, LICENSE, REGISTRATIONS: Maintain a valid driver's license and a working vehicle (car or truck, no motorcycles), at all times. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to handle, or feel objects, tools, or controls; reach with hands, and arms; and climb or balance. The employee frequently is required to stoop, kneel, crouch, or crawl; talk and hear; and taste and smell. The employee is occasionally required to sit. Employee is frequently required to climb and descend stairways, ladders, and gangways. The employee must regularly lift and/or move and/or climb with up to 50 pounds and occasionally lift and/or move up to 100 pounds (with assistance). Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those and employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works in high, precarious places; in outside weather conditions; and near flammable material. Is regularly exposed to wet and/or humid conditions, fumes or airborne particles, toxic or caustic chemicals, extreme cold, and extreme heat. Possibility of working in enclosed spaces. Appropriate safety training is provided. The noise level in the work environment is usually moderate. Full Time Hourly Remote At Bureau Veritas, we are dedicated to ensuring our employees receive fair and competitive pay, accompanied by comprehensive health and wellness benefits. Annual Incentive Bonus Plan Pay offered may vary depending on job-related knowledge, skills, experience, and market location. Our Health and Welfare Benefits are designed to meet your needs, with eligibility starting on your first day of employment: Medical, Dental, and Vision coverage Company-matched Retirement plan Generous Paid Time Off and Company Holidays Life Insurance and AD&D coverage Short-Term Disability (STD) and Long-Term Disability (LTD) Optional life and pet insurance EAP and Total Wellbeing Lifestyle Programs Tuition Assistance and/or Professional Development Employee Discounts This information is transparently provided in adherence to several state and local Equal Pay and Pay Transparency Laws. Join us at Bureau Veritas, where your well-being and professional growth are our top priorities.

Purpose * As Lead Inspection Coordinator, you lead activities to ensure that all equipment, materials, and processes meet industry standards and regulatory requirements. This involves planning, coordinating, and overseeing inspection activities to ensure compliance and safety. Responsibilities * · Inspection Planning: You develop and lead the implementation of inspection plans and schedules based on project requirements and regulatory standards. * · Coordination: You manage the coordination with internal teams, third-party inspectors, and regulatory bodies to facilitate inspection activities. * · Documentation: You maintain and lead the maintenance of comprehensive records of inspection reports, certificates, and non-conformance reports. * · Compliance Monitoring: You ensure all inspections comply with industry standards, company policies, projects requirements and regulatory requirements. * · Issue Resolution: You lead the identification, documentation, and facilitation of the resolution of non-conformances or quality issues. * · Communication: You provide regular updates to the project management team, quality assurance teams, and other stakeholders on inspection status and findings. * · Vendor Liaison: You work with suppliers and contractors to ensure their inspection processes meet project standards. * · Training: You conduct training sessions to the inspection teams on inspection protocols and quality standards' project specifics. * · Mentoring: you mentor and monitor the inspection coordinators' team and support their activities as needed. Education * Bachelor's degree in engineering, quality management, or a related technical field, along with relevant certifications in inspection or quality assurance. Experience * · Proven track-record in leading inspection coordination activities in the oil and gas or similar industry. * · Strong knowledge of industry standards and regulatory requirements. * · Excellent organizational and time-management skills. * · Excellent communication and interpersonal abilities. * · Knowledge of inspection management software and Microsoft Office Suite. * · Attention to detail and problem-solving skills. * · Ability to work under pressure and meet tight deadlines. Functional Competencies Expediting Analytics and reporting Quality Control Plans Regulatory Management Inspection, testing, commissioning and monitoring SBM Product Knowledge Purchasing Tools and Processes Package Management Third parties relation management

Imagine your career taking you to the depths of innovation and the heights of impact. Our people enable continuous progress. Their commitment, collective expertise, and unique capabilities are the engine room behind SBM Offshore's True. Blue. Transition. - shaping the future of energy, and beyond. About Us: SBM Offshore is the world's deepwater ocean-infrastructure expert. Our work is already resulting in cleaner, more efficient energy production. True. Blue. Transition. is our promise to enable that into the future while at the same time using our expertise to support new and existing markets in the blue economy. It starts with Advancing our Core: continuing to advance the decarbonization of traditional energy production. While Pioneering More: helping to enable the energy transition and using our unique capabilities in ocean infrastructure to support more industries to grow sustainably. Sharing our experience for a better blue tomorrow. Purpose * As Lead Inspection Coordinator, you lead activities to ensure that all equipment, materials, and processes meet industry standards and regulatory requirements. This involves planning, coordinating, and overseeing inspection activities to ensure compliance and safety. Responsibilities * · Inspection Planning: You develop and lead the implementation of inspection plans and schedules based on project requirements and regulatory standards. * · Coordination: You manage the coordination with internal teams, third-party inspectors, and regulatory bodies to facilitate inspection activities. * · Documentation: You maintain and lead the maintenance of comprehensive records of inspection reports, certificates, and non-conformance reports. * · Compliance Monitoring: You ensure all inspections comply with industry standards, company policies, projects requirements and regulatory requirements. * · Issue Resolution: You lead the identification, documentation, and facilitation of the resolution of non-conformances or quality issues. * · Communication: You provide regular updates to the project management team, quality assurance teams, and other stakeholders on inspection status and findings. * · Vendor Liaison: You work with suppliers and contractors to ensure their inspection processes meet project standards. * · Training: You conduct training sessions to the inspection teams on inspection protocols and quality standards' project specifics. * · Mentoring: you mentor and monitor the inspection coordinators' team and support their activities as needed. Education * Bachelor's degree in engineering, quality management, or a related technical field, along with relevant certifications in inspection or quality assurance. Experience * · Proven track-record in leading inspection coordination activities in the oil and gas or similar industry. * · Strong knowledge of industry standards and regulatory requirements. * · Excellent organizational and time-management skills. * · Excellent communication and interpersonal abilities. * · Knowledge of inspection management software and Microsoft Office Suite. * · Attention to detail and problem-solving skills. * · Ability to work under pressure and meet tight deadlines. Functional Competencies Expediting Analytics and reporting Quality Control Plans Regulatory Management Inspection, testing, commissioning and monitoring SBM Product Knowledge Purchasing Tools and Processes Package Management Third parties relation management GENERAL INFORMATION SBM Offshore N.V. is a listed holding company that is headquartered in Amsterdam. It holds direct and indirect interests in other companies that collectively with SBM Offshore N.V. form the SBM Offshore Group ("the Company"). For further information, please visit our website at ******************** The companies in which SBM Offshore N.V., directly and indirectly, owns investments are separate entities. SBM Offshore is proud to be an Equal Employment Opportunity and Affirmative Action employer. SBM Offshore does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status, or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need.

Since 1953, Red Valve has set the standard for solving the world's toughest flow control challenges through unmatched elastomer design and manufacturing experience. Red Valve is dedicated to exceeding customer expectations with proven, creative, high-value solutions. Red Valve has a passion for innovation and creativity, with a wealth of patents and best approaches developed for customers' needs. The people of Red Valve embrace this passion every day, providing reliable solutions to customers' most demanding challenges, wherever and whenever they are needed most. Our Core Values Driven to Win Right - Can Do! - High Power - Low Ego & Thrive Together Red Valve was acquired by DeZURIK on January 1, 2021. Our organization offers the following: * Sign On Bonus * Health and Wellness Incentives * Employee Engagement Activities A Red Valve Quality Inspector must be a highly motivated, creative, self-starter who will perform a variety of quality control tests/inspections on products, materials, components, and parts, at various stages of the production process to ensure compliance with quality and reliability standards. The ideal candidate will demonstrate the desire and ability to drive change, identify business needs, areas of improvement and objectives through research and data-backed decision making that will empower them to make recommendations on appropriate business initiatives. Based on the needs of the business, this is a rotational position throughout the facility, covering a variety of quality processes and/or initiatives. The rotational schedule will be determined by the Quality Manager as necessary. Essential Duties and Responsibilities include the following: Knowledge of and/or commitment to learn the following responsibilities: * Ensure quality of manufactured goods * Inspect finished goods * Examine materials from suppliers before sending them to production * Inspect components, subassemblies, and assemblies * Perform quick visual inspections * Perform complex tests using instruments and equipment * Test, measure, and analyze products * Take samples for testing * Ensure company is meeting the standard codes in the manufacturing process * Record pass/fail grade of products * Produce detailed reports * Comply with various ISO operating procedures, work instructions * Observe dials, gauges and indicators to make sure that a machine is working properly * Count numbers of products tested or inspected * Process associated documentation including process tags, rework tags and nonconforming material documents * RMA - issuing and processing * Responsible for final inspection and signoff, and will stamp "OK-Lead" Supervisory Responsibilities This position does not have any supervisory responsibilities. Education High school diploma or general education degree (GED); or a minimum of two years related manufacturing experience and/or training; or equivalent combination of education and experience with an emphasis in quality inspecting. Skills/Experience * 3+ years of quality or other related business experience * Bachelor's Degree in a technical discipline is preferred or equivalent field experience or training * Practical knowledge of Lean business practices * Excellent time management, communication, customer service, and interpersonal skills * Strong analytical skills * Ability to read, interpret and work from drawing, specifications and standards * Ability to inspect parts & components to tight tolerances and specifications * Required: Basic ability to add, subtract, multiply and divide in all units of measure * Required: Intermediate knowledge and skills in the use of standard mechanical and electrical instruments, gauges and test rigs * Required: Basic ability to work under direct supervision and to follow written instructions and techniques * Required: Basic ability to write simple correspondence * Required: Basic efficient time management * Required: Intermediate decision making * Required: Intermediate computer skills, including Microsoft office Travel No travel required Physical Demands To perform this job successfully, the physical demands listed are representative of those that must be met by an employee. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, walk, use hands to handle and feel, reach with hands and arms, talk and hear. The employee may occasionally be required to crouch. The employee may occasionally lift items as heavy as 50lbs. Specific vision abilities may include the employee's ability to see near and far distances. WORKING CONDITIONS Ability to work in normal manufacturing and varying climate control office environment. When working occasionally in some shop areas, personal protection equipment (PPE) will be recommended and/or required (safety shoes, safety glasses w/side shields, hearing protection, face shield, gloves, apron, and boots). Stress may result from workload and meeting schedules. Must have the ability to support extended business hours to meet customer business needs. The ability to multitask is essential job function for this role. * Shift schedule is (4) 10- hour days Monday - Thursday 6:00am - 4:30pm * Friday is reserved for overtime as necessary and may be required * Exposed to loud sounds and distracting noise level DISCLAIMER: The above information on this has been designed to indicate the general nature and level of work performed by the employee within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of any employee assigned to this job. Nothing in this job description restricts management's right to assign duties and responsibilities to this job at any time. QUALITY Quality encompasses all aspects of DeZURIK, Inc.'s business, and every employee shares the responsibility to prevent the occurrence of any nonconformity relating to product, process, and the quality system. All employees have an obligation to identify and record any such nonconformity, and, through designated channels, initiate and recommend solutions. BENEFITS DeZURIK offers a generous benefit package including medical, dental, vision, life insurance, disability, accident, critical illness, and 401(k). Health savings, flexible spending, and dependent care accounts are also available as part of the benefit package. Holiday pay, PTO, and volunteer time are available.

MWH Constructors, a global leader in heavy civil construction of water and wastewater facilities, is currently seeking qualified candidates for the position of Civil/Structural Inspector to support project work in Southern California counties (LA, Orange, San Diego, San Bernardino, Riverside). Job Description/Summary The Inspector will be primarily responsible for implementing and maintaining the Quality Assurance Program, with guidance from the Quality Assurance Manager, Resident Engineer and ultimately the Construction Manager. It is the goal of the Quality Assurance program to construct all work in accordance with the project plans and specifications, as well as requirements of the contract and the expectations of the client. Benefits of the program include minimizing the cost of work by reducing the need for remedial work and expediting client acceptance of completed work. Key Responsibilities • Provide single-point field inspection of contractor's work, representing the Construction Manager in the field. • Prepare for and plan and coordinate all field testing and inspections in accordance with the contract documents • On a daily basis, monitor and record all work scope being executed and prepare a comprehensive daily report with measurement of daily quantities completed and resources utilized • Review, analyze, and record any construction issues potentially resulting in a scope, time, or cost impact to the work of the contractor, which may result in a change to the contract • Attend, as necessary, weekly progress meetings with contractor, including review of progress to planned schedule • Ensure contractor prepares prompt requests for information (RFIs) for questions that may affect the construction schedule • Work with Construction Manager to implement methodology and criteria to resolve any non-compliance notices previously issued • Document compliance and non-compliance with established quality control and quality assurance procedures • Prepare written reports documenting QA/QC inspections, non-compliance notices, and corrective actions • Review and submit all test reports for inclusion in turnover documentation to client • Ensure master as-built drawing information is being maintained by contractor / Maintain project as-built drawing file • Develop project specific quality control and assurance documents and standards Title: Inspector-Civil/Structural Qualifications: • High school diploma or equivalent • Minimum of 8 years of civil/structural experience on municipal water and/or wastewater infrastructure and public works projects, such as treatment plants, pump stations, pipelines, tunnels, roads, traffic facilities, etc. • Thorough understanding of construction safety, quality control, and general contract management requirements • Excellent communication, interpersonal, organizational, and planning skills. • Proficiency in MS Office (Word, Excel) Job Category: Construction, Field Work Preferred Specifications: • Technical school or college degree • APWA Certified Public Infrastructure Inspector • ACIA registered Construction Inspector • California Department of Public Health certification, Grade I Water Distribution Operator and Grade I Water Treatment Operator • ICC certification in Reinforced Concrete, Structural Masonry, Structural Steel and Bolting Prestressed Concrete, Structural Welding • NICET certification in Water/Wastewater Plants • AWS Certified Welding Inspector (CWI) • AWWA certification, Cross-Connection Specialist • ACI Concrete certification • CISEC/QSP certification • Cal OSHA Trench and Excavation • Cal OSHA Confined Space About Stantec: MWH Constructors is a global project delivery company with a focus on water and energy. With the ultimate goal of delivering maximum value to our clients and their local communities, we provide single-source, integrated construction services and the full range of project delivery methods. Incorporating industry-leading preconstruction services and safety practices, our multi-disciplined team of construction professionals delivers a wide range of projects ― including new facilities, infrastructure improvement and expansion, waste-to-energy construction, and capital construction services. MWH Constructors offers integrated program management, engineering and construction expertise and proficiencies derived from our global engineering experience and our self-perform capabilities as a leading global contractor. Additional Information: MWH is an EEO employer - MWH considers applicants for all positions without regard to race, ethnicity, religion, creed, color, sex, gender, gender identity or expression, national origin, age, disability, veteran status, medical condition, marital status, sexual orientation, citizenship or other basis in accordance with federal, state or local laws or regulations.

Nations Roof is currently seeking a professional Commercial Roof Inspector to join our growing team. Nations Roof is one of the largest roofing contractors in the U.S. with locations in most metro areas across the U.S. Our projects range in scope from large scale new construction, industrial, hospitality, distribution centers, retail centers, office buildings, multifamily and green roofs to roof replacements and maintenance of existing buildings. Purpose: Perform onsite roof inspections in accordance with warranty leak investigations, seasonal contract maintenance programs, and customer requests for proposal for local and national accounts and prepare necessary inspection reports and associated proposals for any repair work identified. Benefits Include: Competitive Wage and Exceptional Benefit package: Medical, Dental and Vison Benefits Accident and Disability Insurance Life Insurance Holiday and Vacation 401(K) with employer match Nations Roof is an Equal Employment Opportunity and E-Verify compliant Employer, and our company is a Drug Free Workplace. No Recruiters. All candidates must be authorized to work in the U.S. APPLY

Full-time inspection for roof replacement project with 2-1/2 month duration. Experience with hot rubberized asphalt installations and masonry repairs preferred. Project could start as early as mid-August. See pdf of job listing for additional requirements. Opportunity for additional inspections over the next 2 years. Opportunity for full-time building envelope inspection in the Washington, DC area. APPLY

About Us We are one of the largest mechanical, electrical, and plumbing contractors in Indiana and among the preeminent specialty contractors in the nation. We specialize in a full range of new and retrofit construction for industrial, food processing, commercial, institutional, healthcare, pharmaceutical, and bio-fuel projects. Job Summary Shambaugh Fire Protection is looking for an entry level fire protection inspector to support inspections, testing, and maintenance (ITM) of fire safety systems. This role helps ensure all fire protection equipment meets local, state, and national safety standards. They will handle preparation, documentation, basic testing tasks, and onsite support. Pay Range: $18-22 per hour #shambaugh #LI-DF #LI-Onsite Essential Duties & Responsibilities Assist lead technicians with inspection of fire protection systems including the following: Fire Alarms Fire Sprinklers fire extinguishers Backflow Devices Emergency Lights FARS- Breathing air Prepare job site by organizing tools, equipment and inspection materials Perform basic tasks such as pressure checks, tagging extinguishers, and recording gauge readings under supervision Document inspection findings accurately using digital software by maintaining inspection logs, service reports, and compliance documentation Communicate professionally with building owners, managers and occupants Follow safety protocols and wear required PPE at all times Fulfill all other duties as assigned and needed. Qualifications High school diploma or equivalent Valid drivers license with clean driving record Basic mechanical aptitude and willingness to learn technical fire protection systems Good communication and problem-solving skills Ability to pass background checks required for fire/life safety work Physical Demands Ability to lift 50+ lbs. and work on ladders, lifts, or tight spaces Work Environment Ability to travel daily to customer sites/meetup point for primarily field-based work Ability to work exposed to mechanical rooms, industrial environments, and outdoor conditions Ability to regularly use hand tools, ladders, and safety equipment Regular and reliable attendance, including the ability to work extended hours and weekends as required Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Affirmative Action Policy Please review our Affirmative Action Policy. Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.

Benefits: 401(k) matching Bonus based on performance Health insurance Paid time off Competitive salary About Us: Tew & Taylor is a leading private provider of inspections, plan reviews, and permitting support throughout Florida. We pride ourselves on our commitment to quality, safety, and compliance in the construction industry. Our team of experts works closely with clients to ensure projects meet all necessary standards and regulations. Job Overview: We are seeking a detail-oriented and experienced Threshold Inspector to join our team. The Threshold Inspector will be responsible for conducting thorough inspections of threshold buildings to ensure compliance with all applicable codes and regulations. This role requires strong technical knowledge, excellent communication skills, and a commitment to maintaining high standards of quality. Key Responsibilities: Conduct comprehensive inspections of threshold buildings. Review plans and specifications to verify compliance with applicable building codes, regulations, and standards. Prepare detailed inspection reports and documentation, highlighting any deficiencies or required corrections. Collaborate with contractors, engineers, and architects to address inspection findings and ensure compliance. Provide guidance and recommendations to clients regarding construction practices and regulatory requirements. Stay updated on changes to local, state, and federal building codes and regulations. Participate in ongoing training and professional development to enhance skills and knowledge in the field. Act as a representative of Tew & Taylor during inspections and maintain a professional demeanor at all times. Qualifications: High school diploma or equivalent; a degree in construction management, civil engineering, or a related field is preferred. Valid Florida Threshold Inspector certification and relevant licensure. Proven experience as a threshold inspector or in a similar role within the construction industry. Strong knowledge of Florida Building Code and local regulations. Excellent attention to detail and problem-solving skills. Strong communication and interpersonal skills to interact effectively with clients, contractors, and team members. Ability to work independently and manage multiple projects simultaneously. Compensation: $135,000.00 - $180,000.00 per year About Tew & Taylor Tew & Taylor was founded in 2008 by Doug Taylor and Beverly Tew. Since then, the team has been providing Private Inspections and Plan Review for clients all over Southeast Florida. About Private Provider Enacted October 1, 2002, and then revised on July 1, 2006, F.S. §553.791 provides that homeowners "may elect to use a private provider to provide plans review or required building inspections, or both." The law also ensures that projects using private provider save money on permitting fees charged by the governing municipality. Tew & Taylor partners with homeowners and home builders across Florida to provide private plan review, inspections, and permitting management. Using Tew & Taylor expedites projects and removes the headaches of permitting during construction.

Div. 49 Orlando, FL Entry level position learning how to perform and work with fire protection inspections to ensure compliance, field surveys, part listings, and provide field labor support. Essential Duties and Responsibilities include the following. Other duties may be assigned. * Learn to assist Inspectors while they inspect, test, and maintain fire protection systems in accordance with NFPA codes * Develop knowledge of life safety and NFPA codes and standards. * Develop knowledge of fire sprinkler systems, fire alarm systems, fire suppression systems and their devices, appurtenances, critical components and operations. * Learn to perform testing and maintenance under direct supervision of an Inspection/Service Technician. * Under supervision, perform on the job training documentation each week. * Learn to differentiate between inspection deficiencies and service required to correct found deficiencies. Education and/or Experience High school diploma or general education degree (GED) recommended; 0-1 year of previous mechanical aptitude and installation experience preferred. Computer Skills Basic Knowledge of Microsoft Office, Word, and Excel. Additional Requirements Pre-employment drug screen, Clean MVR, overtime and weekends may be required.

Turner Industries is a fully diversified industrial contractor. We help move the world forward by providing responsive, innovative solutions designed to increase plant production, reduce costs, reduce downtime, and even prevent shutdowns. Headquartered in Baton Rouge, LA, Turner Industries has over 20,000 employees with offices and job sites across the United States. Our single-solution approach in the petrochemical, refining, energy, pulp and paper, and related industries has made Turner one of the nation's top industrial contractors and earned us the No. 1 spot on ABC's 2024 Top Performers list. People are at the heart of everything we do. Their safety, security, and satisfaction have always been our top priorities. For proof, look no further than our strong working relationships and extraordinary workforce. We are seeking an experienced API 510 / 570 inspector for work in the Houston, TX area. This role will perform duties associated with NDE of materials in accordance to referencing code. API 510/570 Inspection and ability to follow and draw isometric drawings. Non-exempt role; Reports to Site Manager; Close Supervision assigned duties according to specific procedures / work is checked frequently. Essential Qualifications: High school diploma or equivalent API 510/570 Certification TWIC card is required Ability to work efficiently in a fast-paced, turnaround environment Strong attention to detail and commitment to safety compliance Documentation needed: certifications and resume Must possess excellent communication, interpersonal, organizational and problem-solving skills Post-offer drug/alcohol screen and physical evaluation Job site safety requirements as required by the client (clean shaven, long sleeves, steel toe boots, etc.) Safety equipment as required by the client (hard hat, safety glasses, gloves, respirator, hearing protection, safety harness with lanyard, etc.) Applicant/employee must not pose a direct threat to the health or safety of such individual or others in the workplace Functional Requirements: Assists in performing duties associated with NDE of materials in accordance with reference code Assist with nondestructive testing equipment set-up Assist in calibrating nondestructive testing equipment Assist in applying testing criteria in accordance with procedures and standards Assist in performing other job-related tasks as assigned by certified inspector/technician Perform additional assignments per supervisor's direction Compensation Final agreed upon compensation is based upon individual qualifications and experience. Benefits Depending on your employment status, benefits include health, dental, vision, life, ADD, voluntary life / ADD, disability benefits, leaves of absence, 401k, paid time off, paid holidays, telehealth access, and employee assistance program. Physical Involvement: Employee may be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds, structures, etc.; reaching in all directions, handling and manipulating objects and materials; coordinating the movement of eyes, hands and fingers to operate tools and equipment; lifting 30-50 lbs. from ground level, waist level, and/or overhead; carrying objects, tools, etc.; standing; sitting; walking; seeing with or without correction; hearing with or without correction; following set procedures and standards; applying basic mathematical skills; planning work; comparing and understanding differences in the size, shape and form of lines, figures and objects; picturing and evaluating solid objects from drawings or diagrams using standards that can be measured or checked; following oral and/or written directions, plans and blueprints; reading; writing; ability to recognize and report safety hazards Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law. Keywords: inspection, API, non-destructive testing, NDT, testing equipment, NDE

Job DescriptionDescription: Who We Are Cornell Forge is a recognized leader in the forging industry with a longstanding reputation for producing complex parts. Our facility is located just south of Chicago in Bedford Park. We are currently recruiting for a 3rd Shift Hot Inspector. The ideal candidate will have experience in manufacturing, preferably in steel, forging or machining. Applicants must be organized, self-motivated and able to complete tasks unsupervised. Essential Functions: Take hourly samples directly from the hammer/press in an efficient and safe manner. Thorough visual inspections of the part for imperfections. Dimensional inspection of parts using a caliper, micrometer, height gage, etc. Hourly non-destructive Magnaflux testing. Promptly inform supervisors of non-conformances during production. Perform dimensional studies, layouts, and capability studies. Accurate entry of tracking information and inspection data into Excel. Assist with corrective action investigations. Using forklift to transport material as needed Practice safe work habits and follow safety rules. Salary: $18 - $20, depending on experience Benefits: Medical/Dental/Vision Group Life Short Term Disability 401K with Company Match Profit Sharing Paid Holidays Vacation Uniforms Requirements: Knowledge and Experience using inspection equipment (calipers, height gages, etc.) Ability to work quickly and efficiently in a safe manner around hazardous equipment. Strong blueprint reading and comprehension. Have a continual improvement mindset. Ability to manage multiple tasks.

AHF Products has a job opportunity for a skilled Inspector position to be located at our plant in Cartersville, GA. The Line Inspector is responsible for monitoring, inspecting, and verifying the quality of products throughout the production process. This role ensures that all products meet company standards, customer specifications, and regulatory requirements. The Line Inspector plays a key role in identifying defects, documenting findings, and communicating issues to production and quality teams to maintain consistent product quality. Key Responsibilities • Inspect products on the production line to ensure they meet quality standards and specifications. • Monitor equipment and processes to identify potential defects or deviations. • Document inspection results, including measurements, defects, and any corrective actions taken. • Communicate quality issues to production supervisors and quality assurance personnel promptly. • Perform visual, dimensional, and functional inspections as required. • Remove and label non-conforming products and ensure proper handling. • Assist in root-cause investigations for recurring issues. • Maintain accurate records and follow all established quality procedures. • Ensure compliance with safety guidelines and maintain a clean, organized workspace. • Support continuous improvement initiatives to enhance product and process quality. Qualifications High school diploma or equivalent. Previous experience in quality control or manufacturing (preferred). Strong attention to detail and ability to identify defects quickly. Basic math and measurement skills. Ability to follow written and verbal instructions. Good communication and teamwork skills. Ability to work in a fast-paced production environment. Must be able to successfully complete and pass a background check, employment verification and drug screening Positive and Verifiable Work History PHYSICAL DEMANDS: Frequently will push, pull, carry, and lift 50lbs. Frequent walking, standing, stretching, bending, stooping, twisting, reaching, grasping, and repetitive movements Occasionally required to climb, stoop, kneel, crouch or crawl Frequently must be able to work in moderate noise, up to 83 decibels. Exposure to noise environment requiring hearing protection. Must be able and willing to work in non-temperature-controlled environment, exposed to weather conditions. MENTAL DEMANDS: Make decisions Develop options and implement solutions Work with a team Maintain regular and punctual attendance (consistent with ADA and/or FMLA) Attention to detail Communicate effectively Multitask in a fast-paced environment Work with a Sense of Urgency AHF PRODUCTS: AHF Products provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. AHF Products is a leading hard surface flooring manufacturer in the USA with a family of trusted brands serving the residential and commercial hardwood, tile, and vinyl flooring markets. With decades of experience in award-winning flooring design, product development, manufacturing, and service, we create quality flooring to last for generations through inspiring designs, innovation, and a deep commitment to outstanding customer service. Our residential flooring brands include Bruce , Armstrong Flooring™, Hartco , Robbins , LM Flooring , Capella , HomerWood , Hearthwood , Raintree , Autograph , Emily Morrow Home , tmbr , Crossville , and Crossville Studios . Our commercial brands include Bruce Contract™, Hartco Contract™, AHF Contract , Armstrong Flooring, Parterre , Crossville and Crossville Studios . Headquartered in Mountville, Pennsylvania, with manufacturing operations across the United States and in Cambodia, AHF Products employs over 3,000 dedicated team members.

Work Qualifications: Formal education: Basic Blue print reading and an understanding of GD&T Experience: Quality and 3D-CAD experience recommended. Preferred experience with inspection template creation Computer Skills: Must be able to use common office software systems, including Excel, MS office Essential Duties and Responsibilities: Retrieve digital models. Create and save inspection reports. Learn, understand, and use PolyWorks inspection software. Use digital data and Model Based Definition to inspect parts. Load parts on inspection table and fixture correctly. Measure basic features without direction. Measure complex parts using programmer's instructions.

Turner Industries is a fully diversified industrial contractor. We help move the world forward by providing responsive, innovative solutions designed to increase plant production, reduce costs, reduce downtime, and even prevent shutdowns. Headquartered in Baton Rouge, LA, Turner Industries has over 20,000 employees with offices and job sites across the United States. Our single-solution approach in the petrochemical, refining, energy, pulp and paper, and related industries has made Turner one of the nation's top industrial contractors and earned us the No. 1 spot on ABC's 2024 Top Performers list. People are at the heart of everything we do. Their safety, security, and satisfaction have always been our top priorities. For proof, look no further than our strong working relationships and extraordinary workforce. We are seeking an experienced API 510 / 570 inspector for work in the Ingleside, TX area. This role will perform duties associated with NDE of materials in accordance to referencing code. API 510/570 Inspection and ability to follow and draw isometric drawings. Non-exempt role; Reports to Site Manager; Close Supervision assigned duties according to specific procedures / work is checked frequently. Essential Qualifications: High school diploma or equivalent API 510/570 Certification Minimum of 4 years certification experience TWIC card is required Ability to work efficiently in a fast-paced, turnaround environment Strong attention to detail and commitment to safety compliance Documentation needed: certifications and resume Must possess excellent communication, interpersonal, organizational and problem-solving skills Post-offer drug/alcohol screen and physical evaluation Job site safety requirements as required by the client (clean shaven, long sleeves, steel toe boots, etc.) Safety equipment as required by the client (hard hat, safety glasses, gloves, respirator, hearing protection, safety harness with lanyard, etc.) Applicant/employee must not pose a direct threat to the health or safety of such individual or others in the workplace Functional Requirements: Assists in performing duties associated with NDE of materials in accordance with reference code Assist with nondestructive testing equipment set-up Assist in calibrating nondestructive testing equipment Assist in applying testing criteria in accordance with procedures and standards Assist in performing other job-related tasks as assigned by certified inspector/technician Perform additional assignments per supervisor's direction Compensation Final agreed upon compensation is based upon individual qualifications and experience. Benefits Depending on your employment status, benefits include health, dental, vision, life, ADD, voluntary life / ADD, disability benefits, leaves of absence, 401k, paid time off, paid holidays, telehealth access, and employee assistance program. Physical Involvement: Employee may be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds, structures, etc.; reaching in all directions, handling and manipulating objects and materials; coordinating the movement of eyes, hands and fingers to operate tools and equipment; lifting 30-50 lbs. from ground level, waist level, and/or overhead; carrying objects, tools, etc.; standing; sitting; walking; seeing with or without correction; hearing with or without correction; following set procedures and standards; applying basic mathematical skills; planning work; comparing and understanding differences in the size, shape and form of lines, figures and objects; picturing and evaluating solid objects from drawings or diagrams using standards that can be measured or checked; following oral and/or written directions, plans and blueprints; reading; writing; ability to recognize and report safety hazards Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law. Keywords: inspection, API, non-destructive testing, NDT, testing equipment, NDE

We are Hiring! Seeking a Commercial Roofing Inspector to provide project analysis and recommendations to management team for local and national account locations. This person will serve as a technical roofing resource to clients, offer solutions-based recommendations on company owned and leased properties. APPLY

Western Partitions, Inc. (WPI) is one of the largest and most reputable interior and exterior contracting firms in the US. WPI provides superior contracting services for drywall, prefabrication, metal studs, acoustical systems, wall panels, fireproofing, firestopping, stucco, claddings, painting, windows, doors/frames/hardware, and more. Since WPI's inception in 1972, we have provided award-winning construction without sacrificing integrity, safety, or efficiency. We are proud that a significant percentage of our business comes from repeat customers. Our service-oriented, fast-track approach, coupled with an attention to detail has resulted in a superior reputation within our industry. We work hard every day to earn our customers' trust and confidence. Throughout our history, our dedication to our employees, quality of work, and customers has set us apart. The strongest characteristic of our organization is the prominent level of pride we take in every job we complete. Our employees are driven to do the job right the first time without compromise. Lastly, our customers choose WPI based on the emphasis we place on communication, trust, and respect. Job Summary The QAQC Inspector is responsible for performing quality assurance and quality control inspections on manufactured products prior to delivery to project sites. This role serves as the final line of quality verification, ensuring compliance with company standards, vendor quality requirements, and customer specifications. The position will also compile and report quality metrics to support continuous improvement initiatives. This role collaborates closely with the QA/QC Program Manager and manufacturing teams. This role will be in the Dallas - Fort Worth area. Key Responsibilities: Receiving and Final Product Inspection: Conduct detailed QA/QC inspections on finished goods to verify compliance with drawings, specifications, and quality standards. Documentation & Reporting: Maintain accurate inspection records for multi-sites, generate quality reports, and track non-conformance issues in the QMS. Metrics & KPI Reporting: Collect and analyze quality data, prepare and provide weekly/monthly reports to the QA/QC Program Manager. Compliance Verification: Ensure adherence to company SOPs, vendors provide QAQC reports, and customer requirements before shipment. Root Cause Feedback: Communicate defects and trends to manufacturing teams for corrective action and continuous improvement. Remote Coordination: Collaborate with QA/QC Program Manager and site teams to resolve quality issues and align on standards. Final Approval: Serve as the last checkpoint for quality before products are released for delivery to site. Qualifications and Requirements: 3+ years in QA/QC inspection or manufacturing quality roles. Ability to interpret technical drawings and specifications. Proficiency in quality reporting tools and Microsoft Office Suite. Excellent attention to detail and organizational skills. Strong communication skills for remote collaboration. Preferred Qualifications: Experience with Lean Manufacturing and Six Sigma principles. Familiarity with ERP/QMS systems. Familiarity with Mechanical and Electrical Systems Certification in quality auditing or inspection (e.g., ASQ CQI). Benefits At WPI our employees are our greatest asset. We put our people first and are proud to provide a comprehensive benefits package designed to meet the needs of our employees at every stage of life. In our commitment to fostering an environment where everyone can thrive personally and professionally, we offer: Competitive pay Incentive bonus plan 401(k) retirement savings plan with match Medical, prescription drug, dental and vision insurance plans with flexible spending account option Life insurance, accidental death, and disability benefits Flexible paid time off policy and paid holidays WPI provides equal employment and affirmative action opportunities to applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability. WPI is a background screening, drug-free workplace. This job description is intended to outline the general nature and level of work being performed by employees. It is not designed to cover or contain a comprehensive list of responsibilities, duties, or skills required of the employee of this job. Furthermore, this description is subject to change at the discretion of the company, with or without notice.

The Inspections Sales Representative is responsible for identifying, qualifying, developing, and servicing customers who align with the company's inspections sales strategy and standard operating procedures. This role focuses on generating new inspection contracts, growing existing accounts, and supporting the successful delivery and retention of inspection services. The position operates under the direction and responsible charge of the Service Manager. Reporting Relationships The Inspections Sales Representative reports directly to the Service and Branch Manager and works closely with service and inspection operations to ensure the successful execution and ongoing management of inspection contracts. Experience, Education, and General Background Skills Required Qualifications High school diploma or equivalent. Valid driver's license with the ability to meet all insurance carrier requirements. Minimum of two years of experience in outside, business-to-business sales. Proven sales skills, including prospecting, cold calling, qualifying leads, and closing business. Strong communication, customer service, and interpersonal skills. Effective time management, organizational, and territory management abilities. Ability to work independently with minimal supervision. Willingness and ability to travel within the assigned territory. Preferred Qualifications Technical or service-based sales experience, preferably in fire protection or a related industry. Working knowledge of Microsoft Office applications and sales or CRM database systems. Physical and Mental Demands This position requires the ability to perform sustained mental tasks for extended periods. The employee must be able to safely visit job sites to assess conditions and service needs. The role requires continuous mental alertness, clear verbal communication, and corrected vision and hearing within normal ranges. Essential Duties and Responsibilities Actively participate in and maintain ongoing engagement with professional and industry organizations in the Tampa Bay area, including but not limited to BOMA, NAIOP, IFMA, and similar associations, to drive inspection sales growth across fire sprinkler, fire alarm, and BDA services. Analyze and understand market opportunities for inspection services within the assigned territory. Consistently meet or exceed monthly, quarterly, and annual sales goals. Identify, target, and pursue prospective customers to secure new inspection contracts. Present inspection services, features, and benefits clearly and professionally, and effectively close sales. Develop and maintain accurate sales records, customer data, and follow-up activity within the company's database. Respond promptly and professionally to inquiries from existing and prospective customers. Proactively prospect for new business through cold calling, networking, and relationship building. Maintain and expand knowledge of the fire protection and inspection industry, including applicable standards and best practices. Effectively manage time, priorities, and territory to maximize sales productivity. Complete all required documentation, reports, and administrative tasks in a timely and accurate manner. This job description is not intended to be all-inclusive. Employees may be required to perform additional duties as assigned. Job responsibilities and requirements may be modified at the discretion of management.

Responsible for examining motor vehicles to ensure vehicles operating on state highways meet all requirements established by the state's department of motor vehicles. These inspections should be completed in a quick, yet thorough manner for customers in a professional and efficient manner. Primary responsibilities Inspect automotive vehicles to ensure compliance to emission standards and governmental regulations. Inspect accessories, air lines, and electric circuits. Check for damage, broken headlines, leaks, and faulty blinkers. Test vehicle for wear-and-tear damage. Inspects and assesses the condition of all of the vehicle's essential mechanical systems and components. Check for improper adjustment. Approve or deny vehicular inspection and issue inspection stickers. Suggest improvements to vehicle that fails inspection. Keep records of vehicles inspected. Check for illegal equipment installed on vehicle. Change oil. Replace fluids. Check preventive maintenance programs. Investigate complains, accidents, and operations. Prepares reports based on findings from the inspections to be presented to the fleet's manager and/or mechanics. Explains and interprets related laws and regulations and communicates with the fleet's manager and mechanics to help ensure the fleet's compliance with state and federal laws and regulations. Prepare reports based on findings. Compensation: $8 to $12 Join Our Team As one of the largest destinations for automotive services, Midas is dominating the industry in developing career paths and building relationships within the communities they serve. At Midas, we take care of everything… tires, brakes, oil… so the opportunities to grow and develop expertise with Midas are endless. *************