Top Utility Operator Skills

Below we've compiled a list of the most important skills for an Utility Operator. We ranked the top skills based on the percentage of Utility Operator resumes they appeared on. For example, 12.0% of Utility Operator resumes contained Boilers as a skill. Let's find out what skills an Utility Operator actually needs in order to be successful in the workplace.

The six most common skills found on Utility Operator resumes in 2020. Read below to see the full list.

1. Boilers

high Demand
Here's how Boilers is used in Utility Operator jobs:
  • Operated auxiliary systems for two units consisting of B&W Cyclone-fired boilers and Westinghouse 450 and 250 MW Turbine/Generator Sets.
  • Help run five coal fired CFB boilers, and two natural gas boilers to produce steam and electricity.
  • Involved in the operation of two B & W water tube boilers with a combined total H.P.
  • Monitored boilers, chillers, air compressors, air dryers, cooling towers, and water pumps.
  • Maintained safe and efficient operation of ash handling as well as steam and water side of boilers.
  • Maintained pumps, boilers and ash handling equipment while conducting preventive maintenance to guarantee minimal downtime.
  • Participated in LDAR inspections on the recovery and power boilers to find leaking steam valves.
  • Monitor boilers, chillers, cooling towers, pumps, all auxiliary equipment and UPS.
  • Worked on ammonia refrigeration boilers, also took care of plant water and air.
  • Conducted testing and water treatment for boilers, RO's and cooling towers.
  • Maintained and operated 3 Cleaver Brook boilers and 2 150 ton Carrier Chillers.
  • Produce steam for site operations via 100,000 lbs per hr boilers.
  • Operated 600# steam boilers and steam turbines.
  • Operate and repair of ammonia system and boilers.
  • Operate pumps, chillers, compressors, boilers.
  • Ensured proper operation of plant boilers.
  • Operate and adjust high pressure (250 & 600 psi) gas and oil fired boilers.
  • Operated boilers, turbine generators, de-mineralization water treatment equipment.
  • Prevented breakdowns by routinely checking and maintaining air handlers, air compressors, emergency generators, and boilers/chillers.
  • Improved Production Output by maintaining proper operation of Boilers, Chillers, Demineralizers, and Waste Treatment Systems.

Show More

2. Safety Procedures

high Demand
Here's how Safety Procedures is used in Utility Operator jobs:
  • Attended weekly and monthly safety meetings to ensure compliance with machine operation safety procedures.
  • Maintained safe operations by adhering to safety procedures and regulations
  • Maintain good housekeeping in Business Unit and follow all quality and safety procedures.
  • Operate all equipment and machinery in compliance with all safety procedures and protocol.
  • Followed plant and company safety procedures while on the job.
  • Use of multiple tools and knowledge of safety procedures.
  • Followed all safety procedures, health regulations.
  • Maintained efficient and accurate stockroom and paperwork operation Understood and performed store guideline and safety procedures
  • Load Catalyst Preform housekeeping Utility workerSafety procedures and protocols
  • Water and gas turn ons and turn offs Follow safety procedures, always utilize safety equipment.
  • Trained on Front end loader 980 CAT, Skid Loader, backhoe Reviewed safety procedures.

Show More

3. Plant Operations

high Demand
Here's how Plant Operations is used in Utility Operator jobs:
  • Review operational reports, analysis, database management systems and informational systems as may be required to insure efficient plant operations.
  • Promoted from trainee position to monitor plant operations and equipment abnormalities.
  • Do all the previous work of an Operator Trainee, but while being responsible for the entire Spray Dry Plant operations.
  • Monitor and operate ash and other auxiliary plant equipment from the field to maintain safe, efficient and continuous plant operations.
  • Maintained buildings and grounds of site and assisted with the maintenance of plant operations in a RAD-CON environment.
  • Started in steam plant operations as auxiliary utility operator and later moved to coal yard crew.
  • Worked as a member of a team to maximize plant operations
  • Take daily inventory of plant operations.
  • Check passports insure plant operations.
  • Operate utilities and building support machinery and systems within pre-established parameters in a manner that will guarantee continuous plant operations.
  • Gas plant operations included: adjusting various controllers for optimim performance of liquid recovery.

Show More

4. Preventative Maintenance

high Demand
Here's how Preventative Maintenance is used in Utility Operator jobs:
  • Developed and initiated preventative maintenance schedules for excavating, exercising and replacing out of service equipment.
  • Developed and delivered comprehensive standard operating procedures and preventative maintenance documentation for new plant equipment.
  • Performed emergency/unscheduled and basic preventative maintenance repairs of production equipment as qualified.
  • Performed daily/monthly Preventative Maintenance on general packaging equipment, as assigned.
  • Performed general preventative maintenance procedures on cleaning line/ production equipment.
  • Documented and performed preventative maintenance and work order requests.
  • Perform preventative maintenance on mechanical and electrical equipment.
  • Identify mechanical and electrical equipment requiring preventative maintenance.
  • Performed facility and equipment preventative maintenance task.
  • Performed preventative maintenance on machinery and equipment.
  • Operated crusher circuit with a 50% increase in production, while maintaining and achieving proper preventative maintenance.
  • Plant Rounds, Preventative Maintenance, Fire reports, replacing shear pins on chain under drag gears.
  • Perform basic preventative maintenance and cleaning on machines to minimize the possibility of future machine downtime.
  • Assist Plant Operator in plant controls as instructed and perform minor preventative maintenance of systems.
  • Lead operator on 20 plus preventative maintenance projects on Cell 1 operations and O-ring systems.
  • Assist with preforming routine preventative maintenance on any & all production equipment as assigned.
  • Repair and preventative maintenance of the city water infrastructure.
  • Performed preventative maintenance on all types of building utilities.
  • Job duties included: Performing routine tasks relative to equipment operations as directed and minor preventative maintenance of systems as designated.
  • Operated Industrial Mixers, Blenders, Scales and Forklift truck Operator Performed preventative maintenance on product packaging machines and conveyors.

Show More

5. Heavy Equipment

high Demand
Here's how Heavy Equipment is used in Utility Operator jobs:
  • Conducted safe operation of numerous pieces of heavy equipment including excavating equipment and street sweepers.
  • Operated heavy equipment, inspected line machinery prior to each shift, performed maintenance on machinery and conveyor belt elevators.
  • Experience working with heavy equipment, certified in loaders, scissor lifts, skid steers and forklifts.
  • Operated skid loader, track mobile, tractor and various other pieces of heavy equipment.
  • Utilized multiple pieces of heavy equipment to assist in the completion of the project.
  • Operated heavy equipment in a focused manner obeying all safety rules and procedures.
  • Operate heavy equipment safely, and complete tasks with such equipment efficiently.
  • Job included running different pieces of heavy equipment for long hours.
  • Run heavy equipment and serve as stand-in for absent employees.
  • Qualified for Heavy Equipment Saw Operator, and Multi-Purpose Crane Operator
  • Operate heavy equipment and related conveyors for coal handling.
  • Trained on multiple pieces of heavy equipment.
  • Run heavy equipment for material handling.
  • Operated and performed maintenance on fork trucks Operated and performed maintenance on heavy equipment for a recycle company.
  • Run Heavy Equipment, In charge of trafficmanagement and truck traffic flow for the tipping floor.
  • Operate machinery and heavy equipment, such as forklifts.
  • Operate heavy equipment( fork lift, backhoe, track machine, crane).
  • coal using heavy equipment-end loader, pull coal ash Did daily, weekly and monthly preventive maintenance on coal chute/coal lift.
  • Operated forklifts, payloaders, and other heavy equipment Operated production machinery Maintained cleanliness within the plant General laborer

Show More

Job type you want
Full Time
Part Time
Internship
Temporary

6. Water Treatment

high Demand
Here's how Water Treatment is used in Utility Operator jobs:
  • Operated and monitored a fractional distillation waste water treatment column.
  • Completed Water treatment and distribution certification through ADEQ.
  • Fork lift Operator, Water Treatment/Quality Control Operator
  • Completed Sacramento Waste Water Treatment program.
  • Water treatment plant consists of 4 wells and a 7 MGD Gravity Filtration plant with Manganese green sand filters.
  • Water treatment lab analysis consisted of pH, turbidity, free and total chlorine, and ammonia.
  • Perform water treatment operations, maintenance and testing at the ground water gravity filtration water treatment plant.
  • Operated a large Water treatment plant that produced 2,400 gallons per minute of treated water.
  • Save and smooth operation and trouble shooting of water treatment and boiler feed.
  • Certified Supervisor responsible for all operations of the Industrial Waste Water Treatment Plant.
  • Utilized GIS system in monitoring water treatment, chlorination, and distribution.
  • Perform weekend duties at water treatment and waste water treatment facilities.
  • Perform metal fabrication on water treatment plants and lift stations.
  • Water Treatment tests and corrective PH balancing, corrosion additives.
  • Power boiler, turbine generator, and water treatment operator.
  • Monitored, operated and sampled waste water treatment plant.
  • Waste water treatment and equipment repair was necessary.
  • Cross train Water Treatment related facility rounds.
  • Maintained log of water treatment systems.
  • Maintained the water treatment system.

Show More

7. Assembly Line

high Demand
Here's how Assembly Line is used in Utility Operator jobs:
  • Managed Assembly Line packaging Procured Items for Line Packaging Selected Personnel to Perform Task to Meet Production Documented Production Status
  • Promoted to and mastered every position on speaker utility operator assembly line.
  • Achieved certification in 9 fuel-tank assembly line operations.
  • Assisted co-workers in operating assembly line machines.
  • Managed a crew of up to nine members labeling and maintaining finished product in an assembly line like manner for packaging.
  • Provided temporary relief for employees on assembly line of brake and headlamp production while on breaks, vacation and medical leave
  • Provided materials to assembly lines for production, quality assurance of material going to assembly line, heavy machine operation.
  • Have obtained the knowledge of how to run an assembly line along with some basic maintenance to the line.
  • Get parts from molds presses and put them in the correct location for assembly line to work with
  • Oversee operation of 3 machines on assembly line covering 2 floors with 30 employees.
  • Performed duties of up to 40 different jobs on the door assembly line.
  • Maintained the storage area, supported assembly lines with equipment needed for production.
  • Performed basic and routine maintenance on assembly line and adjusted equipment controls.
  • Learned all work stations on assembly line to fill in when needed.
  • Worked on assembly line operating and tending gluing and taping machines.
  • Transfer roofing from assembly line to dust collection to prevent sticking.
  • Assisted maintainers on the assembly line to keep production flowing.
  • Worked with a team on assembly lines producing automotive speakers.
  • Provide assistance to assemblers and sections of the assembly line.
  • Determined assembly line bottlenecks and took action to improve.

Show More

8. Osha

high Demand
Here's how Osha is used in Utility Operator jobs:
  • Followed and completed all Food and Drug requirements Followed all OSHS/MIOSHA requirements Emergency Response team Certified
  • Followed all safety requirements and OSHA regulations.
  • Used ISO 9001 and ISO 14000 Standards, 5S Methodologies and OSHA/VPP guidelines in the production of all parts and products.
  • Trained all new hires in accordance to Company, DOT, Federal, State and OSHA standards and best practices.
  • Trained new employees on mining practices, procedures and safety methods, such as MSHA and OSHA guidelines.
  • Work with over 40 co-workers on a daily bases and responsible to know all OSHA regulations and codes.
  • Implemented a regular housekeeping schedule to keep up with OSHA's requirements for feed mills.
  • Observed all work rules, work instructions, OSHA standards, and safety rules.
  • Ensured compliance with all CEOSH, JCAHO, OSHA safety regulations and VHA Directives.
  • Applied OSHA and FAA safety measures regarding chemicals used to assemble equipment.
  • Performed lock out and tag out procedures in accordance with OSHA standards.
  • Identified and corrected potential safety hazards to meet OSHA standards.
  • Follow standard procedures, OSHA requirements and safety standards.
  • Enforced OSHA safety standards per company SOP standards.
  • Performed all operations in accordance with OSHA regulations.
  • Complied with all state and OSHA operating permits.
  • Ensured that employees followed all OSHA guidelines.
  • Helped keep current on OSHA regulations.
  • Certified competent person and first aid,also have OSHA 8hr and 40 hr cards.
  • Participated in OSHA VPP Star recertification.

Show More

9. Air Compressors

high Demand
Here's how Air Compressors is used in Utility Operator jobs:
  • Used working knowledge of air compressors, feed water pumps, coal screw, rotary valves DP gauge fans and blowers.
  • Operate steam turbines & electrical air compressors & dryers to produce and maintain plant air and instrument air header.
  • Air Compressors: Operated and maintained five high volume units and air dryers for control air units.
  • Operate gas turbine driven air compressors and steam driven turbine compressors for low pressure air.
  • Recorded appropriate readings on plant equipment including turbine generators, pumps and air compressors.
  • Operate all air compressors, cooling tower chemical adjustments.
  • Operated and maintainedair compressors and compressed air system.
  • Maintained the Operation and Maintenance on (3) Ingersoll Rand air compressors with air- dryers to maintain set dew point.
  • Operate main plant air compressors, check air flow, and monitor condensation discharge.
  • maintain chillers, cooling towers, water treatment systems, air compressors, oil heaters
  • air compressors, pumps, air handler filters, cooler equipment, air handlers, steam system).

Show More

10. Chillers

high Demand
Here's how Chillers is used in Utility Operator jobs:
  • Operate chillers, which takes heat from 1-120 to supply plant with cool air/H20.
  • Worked with compressors, chillers, and other operational equipment.
  • Perform load shaving on chillers.
  • Control of waste treatment and deep well injections system Maintain refrigeration and main chillers operations Monitor desolation process
  • Fix any problems associated with the boiler and chillers and perform minor maintain on off shifts when maintain personnel are not present
  • Operate chillers, cooling towers, pumps and all primary and secondary equipment for safe and efficient plant operation.

Show More

11. Water Systems

high Demand
Here's how Water Systems is used in Utility Operator jobs:
  • Operated support utilities such as cooling tower, boiler, air compressor, thermal oxidizer and waste water systems.
  • Maintain, repair and replace City water, sewer and storm water systems.
  • Test and treat boiler, cooling and other plant water systems.
  • Tested water systems to verify the quality of water.
  • Maintained and operated plant fire water systems.
  • Completed daily monitoring of water and wastewater systems Performed weekly maintenance on all necessary equipment Completed ~3,000 quarterly meter readings

Show More

12. Front End Loader

high Demand
Here's how Front End Loader is used in Utility Operator jobs:
  • Operated front end loaders, Thirty- Ton forklifts, and One hundred foot cranes.
  • Loaded silos, operated front end loaders, bobcats, sweeper, and forklifts
  • Operated heavy machinery such as bobcat front end loader and fork lifts.
  • Loaded materials and drove front end loader; organized and stacked bails.
  • Check gauge for water and oil pressure on front end loaders.
  • Operated overhead cranes, fork trucks, and front end loaders.
  • Operated heavy equipment such as front end loader and skid steer.
  • Operate front end loader, forklift, man lift and bobcat.
  • Operate Forklift, Front end loader and press.
  • Operated front end loader and forklift when required.
  • Certified Fork Lift Operator and front end loader
  • Experienced Front End Loader operator.
  • Perform daily maintenance and inspection sheets on equipment, water truck, telehandler, fuel system, and front end loader.
  • Assisted maintenance by operating forklift and front end loader in a safe manner to relocate raw materials and finished product.
  • Transfer material from process area to disposal area using Front End Loader, Dumptruck, and Excavator.
  • Run water trucks, pit loaders and front end loaders, skid steers, dozers D8 & D9, graders.
  • Operated skid loaders and front end loaders Drove yard truck Dumped trailers with raw material Reason for leaving: voluntary quit
  • Operate heavy equipment including railcar movers, front end loaders, dozers, graders, and articulated haul trucks.
  • Operated front end loader Operated forklift Bagging Loading Rail cars Ran Crude Clay Shed ISO 9000 Auditor Safety Committee Member

Show More

13. Troubleshoot

high Demand
Here's how Troubleshoot is used in Utility Operator jobs:
  • Assisted maintenance personnel in electrical troubleshooting PLC controlled conveying equipment.
  • Fire Protection System operation and troubleshooting.
  • Gained vast experience on forecasting and inventory as well as troubleshooting and gaining the skills used today in the operations field.
  • Perform troubleshooting, minor corrective and preventive maintenance, equipment water treatment, chemical tests performance, among others.
  • Assist in or direct the start-up of new and troubleshoot existing facilities/equipment to ensure optimal operation and performance.
  • Performed troubleshooting and correction to the utilities in order to support the Manufacturing and Projects schedules.
  • Operate on a D3 computer, I troubleshoot problems in work area via conveyors and equipment.
  • Performed troubleshooting procedures on all machines I was qualified to operate and diagnosed minor maintenance issues.
  • Analyzed process data and equipment performance data to improve quality, throughput, and troubleshoot.
  • Operate, monitor and control batch processes and troubleshoot problems as they arise.
  • Performed utility system operations, preventive maintenance (PM), and troubleshooting.
  • Shop floor: Components Area Set up, troubleshoot and operate machines.
  • Helped troubleshoot problems with the machines to eliminate waste and downtime.
  • Machine operator, mechanic, troubleshooting, daily production paperwork.
  • Pack and ship customer orders, troubleshoot problems to resolution.
  • Analyze and troubleshoot leaks and perform emergency repairs.
  • Perform troubleshooting and maintenance on coating booths and guns
  • Communicate with maintenance to assist them with troubleshooting.
  • Performed own mechanical troubleshooting as a Line Tech.
  • Operate, maintain, troubleshoot machinery.

Show More

14. Hvac

high Demand
Here's how Hvac is used in Utility Operator jobs:
  • Established reliable efficient and continuously improving Facilities, Utilities and HVAC operations.
  • Maintained the operation of 30 different plant systems including compressed air, water, electrical, and HVAC systems.
  • Monitored HVAC system and air handling system for positive pressure systems and negative pressure systems.
  • Assisted in the validation of a new utility control system and HVAC controls.
  • Review utility, process system/equipment, Plumbing, ductwork plans, architectural, HVAC and P&ID's.
  • Ensured that all HVAC equipment was fully operational and safety standards were maintained.
  • Monitored daily activities of HVAC system functions via recorded logs and BAS computer.
  • Replaced filters for equipment and hvac equipment.

Show More

15. Machine Operation

average Demand
Here's how Machine Operation is used in Utility Operator jobs:
  • Observe machine operations to ensure quality and conformity of products to customer specifications.
  • Observed machine operation to detect working pieces or machine malfunctions.
  • Performed highly repetitive types of short cycle machine operations associated with quantity production of identical units, primarily machine tending.
  • Maintained machine operation at full capacity, produced quality product, and performed periodic quality assurance checks on output.
  • Operated and monitored equipment/line, removing or shifting materials and finished product as necessary to facilitate proper flow and machine operation.
  • Machine Operation-Filling customer orders for health and beauty products and directing temporary employees on line operations.

Show More

16. Water Samples

average Demand
Here's how Water Samples is used in Utility Operator jobs:
  • Collected water samples using sanitary handling procedures as required for testing in the laboratory.
  • Collected and processed water samples, recorded results and entered into computer.
  • Run feed water samples and lab tests for plant optimization.
  • Performed daily rounds on equipment and analyzed water samples.
  • Analyze water samples and add chemicals as required.
  • Collect, test and record water samples.
  • Analyze oil and water samples.
  • Test boiler water samples, RO samples Potable water samples, sewage samples, and chilled water samples
  • Record wellhouse data, take water samples, monitor and adjust chlorine level in water.

Show More

17. Raw Materials

average Demand
Here's how Raw Materials is used in Utility Operator jobs:
  • Maintain raw materials to ensure continued process operation.
  • Used various pieces of mobile equipment to maintain proper inventory levels of all raw materials stock bins, stockpiles and silos.
  • Streamlined and expedited delivery of materials across plant site, making it faster for production to get raw materials.
  • Load, and unload trucks, and enter purchase orders in computer, and tag raw materials properly.
  • Bring raw materials to machine and take produce good to staging area for ship out.
  • Keep packaging lines stocked with the necessary raw materials to keep them up and running.
  • Operated heavy equipment used to move raw materials used within the cement industry.
  • Conduct cycle counts of raw materials to prevent overstocks, and shortages.
  • Line Driver - responsible for bringing all raw materials to the line.
  • Operate forklift moving various raw materials from stacked on skids to 1800lb.
  • Operate a fork lift to move raw materials around the plant.
  • Operated forklift and loading and unloading raw materials as required.
  • Operated forklift to load/unload raw materials and finished products.
  • Inventory of all raw materials and finished goods.
  • Charged draw materials into process vessels.
  • Measured and checks raw materials.
  • Warehouse receiving of goods,material,supplies and warehouse inventory of raw materials.
  • Unload bulk raw materials from tank trucks, rail cars and, intermodal containers.
  • Look over formula, Order raw materials and supplies ( bulk bags, pallets, drums ect. )

Show More

18. Bobcat

average Demand
Here's how Bobcat is used in Utility Operator jobs:
  • Operate fork lifts, Overhead cranes and Bobcats as well as unloading trucks with titanium turnings.
  • Operated heavy duty equipment (bobcat) to unload grain barges onto conveyor belt.
  • Operate forklift, bobcat, cherry picker, and scissor lift as needed.
  • Experience in driving loader, bobcat, forklift, and ash truck.
  • Operate and maintain forklift, bobcat, and vacuum truck.
  • Lay sod and spread rocks using a Bobcat.
  • Operate bobcat skid steer and fork lift.
  • Operated bobcat, loader, track mobile, tanker truck moving flu dust, and a 50 ton rock truck.
  • Assist maintenance crews with repairs, heavy plant cleaning using pressure washer, bobcat, shovels, brooms, etc.
  • Operate Dingo, Bobcat, loader, forklift, lull and hand trucks in an efficient manner.
  • Drive a roll off truck, operate a sit down forklift and bobcat.
  • Skid steer operator (bobcat), Forklift and etc.
  • Trained to drive the bobcat and endloader.
  • Move and handle products with the Forklift, operate payloader,Bobcat,over heavy equipment.
  • haul dirt with bobcat,move material to and from with forklift.
  • General Clean Up including bobcat and product clean up Railcar Product Load Railcar Movement Product Production

Show More

19. Rail Cars

average Demand
Here's how Rail Cars is used in Utility Operator jobs:
  • Monitor rail cars during the loading/unloading operation.
  • Operate switches/locomotive to permit correct train movement for safe and expeditious switching of rail cars according to company policies.
  • Ensured railway operations were carried out safely and efficiently, by loading and unloading rail cars.
  • Drive the locomotive to move the rail cars around the yard to their designated place.
  • Loaded/unloaded trucks, rail cars and barges of powdered, solid and liquid chemicals.
  • Unload rail cars using powered hand car openers and Operating Rail moving equipment.
  • Loaded both dry and slurry kaolin into rail cars and trucks.
  • Verify incoming rail cars on Bill of Lading and P.T.R.A.
  • Conducted safety inspection on containers and rail cars before loading.
  • Load sodium nitrite liquor into rail cars per customer specifications.
  • Inventory of rail cars and coal shipments.
  • Loaded rolls into containers and rail cars.
  • Spot rail cars to assigned destinations.
  • Move rail cars with track-mobile.
  • Bulk loading trucks, bulk tankers, dry vans, container trucks, dump beds, and rail cars.
  • operated various sawmill machines; stacked, tied down, and loaded rail cars/trucks with boards.
  • Experience in rail cars, taking samples and gaging from tanks.
  • Operated track mobile and unloaded rail cars !
  • Loaded/unloaded bag trucks/rail cars 4.
  • Operated numerous stationary/processing equipmentLoaded brick trucks and rail cars with Hyster 50 forklift

Show More

20. Hand Tools

average Demand
Here's how Hand Tools is used in Utility Operator jobs:
  • Test and adjust machine speeds and actions, according to product specifications, using gauges and hand tools.
  • Disassemble clarification equipment a minimum of one time per week using hand tools to facilitate cleaning.
  • Obtain, move, and sort products materials, containers, and orders using hand tools.
  • Required to use various hand tools, micrometers, gauges and other precision measuring instruments.
  • Monitored, issued and accounted for all the hand tools used in the manufacturing process.
  • Can operate heavy equipment, all power tools, hand tools and weld.
  • Used various hand tools for roadway and concrete, water and sewer projects.
  • Install saw blades using hand tools and rules.
  • Use hand tools, air tools, and power tools to form, fit, and cut fiber glass.
  • Loaded materials into extruder and machines, using hand tools, and adjust feed mechanisms to set feed rates.
  • Locate water leaks in water distribution system,using hand tools excavate around leaks for repair.
  • Operate hand tools in a safe manner.
  • Remove cured products from mold using hand tools and air hose.Deflash cured products.

Show More

21. Setup

average Demand
Here's how Setup is used in Utility Operator jobs:
  • Verified machine setups and adjusted malfunctioning machines.
  • Operated radio frequency pole during live taping in the field and also assisted fiber specialist with cable setup and tire down.
  • Performed all aspects of machine operation including maintenance, setup, cleaning, paperwork, and inspections.
  • Operate high speed rotary filler, perform setup, and change over per job specifications.
  • Full live production setups of Football, Basketball, Bowling, Concerts, etc.
  • Provide equipment setups and maintain the corresponding parameter of all equipment.
  • Executed the setup and troubleshooting of multiple types of machinery.
  • Understand and perform setup and changeovers for product line.
  • Adjust and setup press according to customer specifications.
  • Assisted in the setup, takedown, and operation of cameras, audio, and microphones for televised professional soccer games.

Show More

22. Control Room

average Demand
Here's how Control Room is used in Utility Operator jobs:
  • Maintain schedule for control room, approve vacation time through time clock manager, AIM's, and maintain yearly reviews.
  • Stay in continuous contact with control room technician to ensure temperatures and pressures are at safe levels for continuing production.
  • Advanced from Utility Operator to Quality Control Technician and then to Control Room Operator all in approximately five years
  • Operated control room where all plant equipment was monitored and controlled in the production of product.
  • Maintained control room which includes starting/stopping pumps, belts, screens, crushers, etc.
  • Cover Batter operator, Control Room attendant, Cutter Deck and Peeler operators for break.
  • Fill out weekly temperature readings for OM SupervisorFollow control rooms process for clearing equipment.
  • Operated auxiliary plant equipment, assisting the Control Room Operator from the field.
  • Possess extensive familiarity and knowledge of lab operations and the control room.
  • Control room operation, water analysis and waste operation.
  • Operate control room system for process of production.
  • Operated control room which controlled all plant equipment.
  • Adjust plant feed as per control room.
  • Coordinate with the Control Room.
  • Control room operator and utility helper !
  • Check and maintain all utilities equipment in my designated area, and communicate any problems to control room.
  • Power utility operator runs generators boilers ,chillers water plant and control room.
  • Work with control room for system operations .Cooling towers, Inventory.

Show More

23. Reverse Osmosis

average Demand
Here's how Reverse Osmosis is used in Utility Operator jobs:
  • Operated, monitored and sampled reverse osmosis purified water system.
  • Operate reverse osmosis water treatment units, which includes water testing, flow adjustment, and recording performance data.
  • Experience operating water distiller including an ozone purifier and reverse osmosis filtration system incuding charcoal filters and caustic sodas.
  • Operated, monitored and maintained Zeeweed system, reverse osmosis and softening system for boiler water make-up & plant process water.
  • Operate water treatment equipment, to include zeolite water softener, reverse osmosis system, DI filter and condensate polishers.
  • Operate Reverse Osmosis system, deionized water, and softened water systems.

Show More

24. Quality Standards

average Demand
Here's how Quality Standards is used in Utility Operator jobs:
  • Set up computerized parts-making equipment and produced parts according to blueprint and quality standards to meet production quotas.
  • Train team members on operation and process flow of extrusion/ injection jobs as well as quality standards.
  • Start safe and stay safe; Ensure that products are met quality standards or exceeded.
  • Assure all employs are trained and can perform task according to quality standards.
  • Performed within high tolerances and stringent ISO 9,002 quality standards.
  • Adjust equipment to meet quality standards and product yields.
  • Comply with GMP requirements and plant production/quality standards.
  • Directed as many as 10 team members in achieving critical production timelines and quality standards.

Show More

25. GMP

average Demand
Here's how GMP is used in Utility Operator jobs:
  • Selected to rewrite 35-40 training manuals for various utility systems to meet the current GMP and regulatory standards.
  • Fulfilled all the regulations related to GMP's, SOP's, and security requirements among others.
  • Retain samples for quality control testing, and analysis to meet GMP compliance, and SOP's.
  • Maintain Good Manufacturing Procedures (GMP's) on the lines and surrounding areas.
  • Operate within GMP Regulated Standards.
  • Follow a daily GMP list.
  • Helped the company maintain excellent federal, state and company audit score by adhering to GMPs.
  • Coordinated Building Automation System (BAS) validation activities to ensure cGMP compliance.
  • Performed industrial sanitation duties in keeping with GMPs.
  • Cross trained on all machinery in bakery while following all SOPs and GMPs.
  • Batch proccess and DSP operations in a aseptic and GMP environment.
  • Monitored parameters and records as required per SOPs and cGMPs.

Show More

26. Dump Truck

average Demand
Here's how Dump Truck is used in Utility Operator jobs:
  • Operate a dump truck to move ash from the power plant safely and with minimum track out to our landfill.
  • Operated front end loader to feed the plant and load dump trucks to increase load capacity.
  • Operated equipment including: excavator's, dump trucks, track loaders, hydro-seeder truckers.
  • Transported necessary equipment to job site via ten-wheeled dump truck with trailer and backhoe.
  • Operated dump truck to transport new and old dirt to and from work site.
  • Operated Dump Trucks, Backhoes, Front-end Loaders and Skid Loaders.
  • Operated front-end loaders, dump trucks, and other industrial vehicles
  • Operate dump trucks to deliver and pick up material.
  • Operate dump trucks, backhoe & bucket loaders.
  • Operated dump truck with trailer and backhoe.
  • Operated heavy equipment that included: trackhoes, backhoes, bobcats, forklifts, dump trucks and front end loaders.
  • operate equipment such as dump truck, backhoe, bobcat, front end loader jackhammer, power saws utility trucks
  • Operate high lift, forklift,vac truck, and dump truck.

Show More

27. Quality Checks

average Demand
Here's how Quality Checks is used in Utility Operator jobs:
  • Execute quality checks with various gauges to ensure product reliability and customer satisfaction.
  • Perform required quality checks and obtain tray counts for each container or mailing and fill in the appropriate form.
  • Monitor parts/material, on the hour quality checks of part dimensions; give breaks to fellow operators, cleaning
  • Conduct hourly quality checks and inspect full goods and pallets or other raw materials as needed.
  • Decreased rework and returned parts by 24% through inspections using Statistical Process Control quality checks.
  • Operate assembly machinery, perform quality checks on assembled parts, record quality check results.
  • Completed hourly temperature and gas checks as well as daily quality checks.
  • Conduct equipment challenges, production quality checks and daily area checks.
  • Graph on an SPC chart the results of quality checks.
  • Key production codes & quality checks into computer system records.
  • Maintained quality checks every 30 minutes to product conformity.
  • Performed quality checks and recorded them throughout the shift.
  • Operate BSA machine and perform material quality checks/inspections.
  • Experience final inspecting the processed titanium pieces to insure it passes all of the quality checks necessary to continue the processes.
  • Assist in helping Quality Control Technicians in gathering samples and running quality checks on proppant and slurry samples.
  • Produced dye water for animals products Performed quality checks and document results using computer programing
  • Perform quality checks per ISO 9000 standards and Southwire QSP's, which include tensiles, elongation, and weight.
  • Perform quality checks on all product ensuring superior quality Package finished producs and prepare them for shipment.

Show More

28. Supervisory Personnel

average Demand
Here's how Supervisory Personnel is used in Utility Operator jobs:
  • Consult with managerial or supervisory personnel.
  • Regulate or shut down equipment during emergency situations, as directed by supervisory personnel.

Show More

29. Data Entry

average Demand
Here's how Data Entry is used in Utility Operator jobs:
  • Sample analysis and data entry.
  • Assisted in production data entry.
  • Handled entire dry grocery physical inventory including data entry input and reconciling count, item and location discrepancies.
  • ADC-automated Data Collection system/ERP/MRP/SAP -Container-Label placement for shipping/receiving/ Data Entry/Logistical reporting when needed.
  • Performed data entry duties and compiled information from bankers utilizing Microsoft Excel.
  • Preform data entry utilizing Motorola scanners into SAP computerized inventory systems.

Show More

30. CNC

low Demand
Here's how CNC is used in Utility Operator jobs:
  • Worked in the glass line as a CNC glass cutter to cut up the glass to specific sizes.
  • Trained and certified to run CNC routers, spray glue systems, production saws, and forklift.
  • Operated various CNC machines, organized supplies, and cleaned facilities for a summer-aid program.
  • Trained in machine shop for a year on Bridgeport, Lathe and some CNC.
  • Utilize a CNC machine to size and rout door panels.
  • Helped on a CNC rail miller.
  • Set up and operate CNC Mills and CNC Lathes.
  • Operate presses, slicers and cnc machine- Fill in as helper, material handler or whatever needed
  • Filled CNC machines with oil and coolant Ran floor sweepers and scrubbers to sanitize floors Utilized a fork lift truck when needed
  • Order and receive parts for line workers Cover positions on the line when needed Operate CNC machine when needed
  • Set up and run various machines from a shear to ctl or cnc.
  • Run cnc burners, weld multiple positions and processesRun overhead cranes fork lift Eslag welding Blue print reading

Show More

31. Production Equipment

low Demand
Here's how Production Equipment is used in Utility Operator jobs:
  • General purpose employee, mainly shipping and receiving operating forklift with occasional running machinery and production equipment.
  • Operated and adjusted production equipment to ensure that quality specifications are being met.
  • Started as a utility hand now moved up to operator running production equipment
  • Operated production equipment and assured equipment was operating properly.
  • Repaired production equipment as per requirement.
  • Operated various production equipment and processes
  • Preformed troubleshooting on down production equipment to return it back to productivity with little down time.
  • Operated plant utilities (boilers/HVAC systems) made repairs to piping and plant production equipment.
  • Managed production equipment stockroom, staffing, inventories, and stock tracking program.
  • Performed plant production equipment light maintenance and repair.
  • Gained experience performing AM work on production equipment.
  • Set up and operate production equipment in accordance with current good manufacturingpractices.
  • Operate Boilers, Steam systems, Ash removal systems, Associated emissions control equipment, and Dematerialized Water production equipment.
  • Performed duties such as operating, creeling and doffing spinning production equipment.
  • Clean coaters, dryers and other production equipment.
  • Operate production line equipment Load/unload material to and from plant Assist maintenance with production equipment
  • Operate various other smaller production equipment, slitters, rewinders.

Show More

32. Pallet Jack

low Demand
Here's how Pallet Jack is used in Utility Operator jobs:
  • Operated electrically and manual pallet jacks.
  • Operated heavy equipment, i.e: forklifts, electrical/mechanical pallet jacks, to transport nuclear powder cans to various locations.
  • Operated pallet jacks, and forklifts to move pallets, and bring in product to assembly line.
  • Certified in driving Raymond standing forklift, sit down fork lift, & pallet jack.
  • Set up 40 - 50 carrier routes per day using an electric hand pallet jack
  • Load and unload trucks using a forklift or pallet jack and counting inventory of product
  • Experienced in use of pallet jacks, forklifts, and other equipment regularly.
  • Certified to operate forklift, motorized pallet jack and skyjack scissor lift
  • Delivered pallets of good with a pallet jack to freezers.
  • Load and unloaded trucks using pallet jack lift and forklift.
  • Carry pallets to the warehouse using a pallet jack.
  • Operated pallet jacks and forklifts as needed.
  • Operate forklifts and or pallet jacks.
  • Stock line using pallet jacks.
  • Dispense chemicals into a jug and label them.Safely operate forklift, manual forklift, and pallet jack.
  • Operated pallet jacks and forkliftssafely and with a 0% incident rate.

Show More

33. PPE

low Demand
Here's how PPE is used in Utility Operator jobs:
  • Maintained warehouse inventory, packaged and shipped finished product.
  • Maintained good housekeeping and equipment appearance in working areas.
  • Shoveled loose materials such as sand, gravel, metals, plastics, or chemicals into machine hoppers or into vehicles.
  • Attach buttons, hooks, zippers, fasteners, or other accessories to fabric, using feeding hoppers or clamp holders.
  • Sorted product for bad pickles and peppers, inspected bags of product for defective bags and bad product.
  • Inspect products once coming off of the production line and before being shipped to meet ISO 9000 guidelines.
  • Set up, operated, or tended machines that extruded and formed wire from copper core and polymers.
  • Load containers being shipped internationally and completing the necessary paperwork for the company, customer, and port.
  • Operate machines or vehicles equipped with blades to remove, distribute, level, or grade earth.
  • Use a forklift and stack truck to transport the containers to other departments to be shipped out.
  • Perform toxic area entries in various levels of PPE including level A(totally encapsulated suit).
  • Operated the wet ash handling systems for the removal of bottom ash in the wet ash hoppers.
  • Loaded conveyor by hand, lift, hoist and by opening gates, chutes and hoppers.
  • Preformed all work in an organized and safe manner; following chemical PPE and safety requirements.
  • Stacked boxes of nails on skids along with nail guns so they can be shipped out.
  • Created bundles and pallets of the product to be checked and shipped out to the stores.
  • Clean out the hoppers and regrind the bad parts so the material can be reused.
  • Load animal feed in to semi trailers and rail cars to be shipped to customers.
  • Fill hoppers during production to keep a constant feed for continuous production of explosive powder.
  • Maintain proper PPE(personal protective equipment) depending on the task at hand.

Show More

34. Daily Operations

low Demand
Here's how Daily Operations is used in Utility Operator jobs:
  • Monitor furnace and utility systems daily operations to ensure they operate within the design parameters.
  • Control and monitor daily operations.
  • Maintain vital equipment, necessary for shipping, receiving, and daily operations of the MD branch of Western Sugar.
  • Executed daily operations of preparing supplies for assembly, filing in for absent operators, and giving restroom breaks.
  • Maintained daily operations of machinery, loading and unloading of trucks, etc.
  • Take necessary steps to keep daily operations running safe.
  • Help set up daily operations for the Jacksonville Jaguars.
  • Assisted the supervisor in daily operations of the department.
  • Monitor daily operations to ensure a free flow process, and also supervise execution of daily, quarterly and annual tasks.
  • excelled in daily operations as well as QA testing and reporting.

Show More

35. Hazmat

low Demand
Here's how Hazmat is used in Utility Operator jobs:
  • Trained in Hazmat spills, Respirator use, and Fire Safety.
  • Served as HAZMAT technician on the plant emergencysquad.
  • Certified Level 5 OSHA Hazmat emergency responder.
  • Fire Brigade and HAZMAT team member with the greatest adherence towards Standard Operating Procedures and safety of plant personnel and equipment.
  • Performed initial entry duties into chemical hot zones while assigned as a member of the JACADS Emergency Response/HAZMAT Team.
  • Responded to 15 tractor trailer HAZMAT spills and 20 vehicle fires, securing the scenes until local fire HAZMAT teams arrive.

Show More

36. Product Quality

low Demand
Here's how Product Quality is used in Utility Operator jobs:
  • Maintained product quality and routine checks to ensure automated inspection devices performed properly.
  • Prepare and time ingredients in case of changeovers thus ensuring product quality and ingredients.
  • Clean petroleum and chemical tanks for product quality, and product change.
  • Confer with technical and supervisory personnel to report or resolve conditions affecting safety, efficiency, or product quality.
  • Created CMM programs for engineering special projects and conducted gauge calibrations to ensure product quality conformance to corporate and regulatory requirements.
  • Developed and initiated protocols for analysis of both in-production and in-service product failures, which increased product quality and reliability.

Show More

37. CPR

low Demand
Here's how CPR is used in Utility Operator jobs:
  • Trained for confined space rescue, AED operation, CPR, and basic first aid.
  • Fire brigade member & CPR AED Certified.
  • Answered emergent/non emergent phone calls -Familiarity with geography of local city and counties -CPR certified -CAD usage for medical/fire/ems protocols as trained
  • Attended CPR classes and obtained certification
  • Completed certification for OSHA 10, forklift operating, man basket, CPR, and flagging.
  • Mounted wafer coming from TacProbe following information on tracker as how to be mounted.

Show More

38. Storage Tanks

low Demand
Here's how Storage Tanks is used in Utility Operator jobs:
  • Monitor product movement to and from storage tanks, coordinating activities with other workers to ensure constant product flow.
  • Loaded and unloaded sulfuric acid into storage tanks and transport trucks.
  • Prepare the batches for the Sugar/Sapp/Salt storage tanks these will be for the bylines as well as the prime's.
  • start and stop process units as needed, monitor barge off loads into storage tanks and transfer liguids as needed.
  • Label drums for shipment Pull product from storage tanks when needed Fill bins as needed Unload and load tanker wagons
  • Controlled and monitored pressure vessels, storage tanks, hot air product dryer and many other chemicals in processing equipment.

Show More

39. Loto

low Demand
Here's how Loto is used in Utility Operator jobs:
  • Job Duties: Conduct plant rounds, assist CRO, perform LOTO, and report any abnormalities.
  • Traced out lines, coordinated with maintenance to isolate and repair equipment and lines per LOTO standards.
  • Follow SOP and LOTO processes when needed; handle cleaning chemicals following PPE procedures.
  • Trouble shoot equipment and performed LOTO procedures per sops.
  • Perform LOTO on various equipment.
  • General housekeeping and Good Manufacturing Practices Familiar and practiced in Safety Audits, LOTO Procedures, and Quality Control Programs
  • Work on broken equipment in a timely matter with the proper LOTO procedures

Show More

40. Water Pumps

low Demand
Here's how Water Pumps is used in Utility Operator jobs:
  • Monitored and took readings on turbines and (HTHW) high temp hot water pumps.
  • Experienced in building a condensate manifold Performed maintenance on water pumps and multiple fan heaters, etc.
  • Maintain water softeners, sand filters water well pumps, feed water pumps, cooling towers and pumps.
  • Monitored all Boilers, water Pumps and water Heaters For residence to have Heat and Hot water
  • Maintained the steam turbine feed water pumps, oil pumps, and condensate pumps.
  • Maintain boiler room equipment including feed water pumps, oil pumps.

Show More

41. PLC

low Demand
Here's how PLC is used in Utility Operator jobs:
  • Maintain pneumatic valves, actuators, PLC cabinets, motor VFD's and Motors.
  • Read ladder logic with specification to relay logic, PLC, and VFD control.
  • Operate Purified Water Endotoxin Control (PWEC) with Delta V PLC System.
  • Activated sludge track studies via spiked and unspiked OUR and TOC PLC logic design and programming.
  • Regenerate ion exchange resins and other media utilizing PLC controlled equipment for backwash chemical addition and rinsing.
  • Operate highly automated manufacturing equipment utilizing PLC based automation and assisted with the tray loading process.

Show More

42. FDA

low Demand
Here's how FDA is used in Utility Operator jobs:
  • Monitored product labels and codes to insure compliance with company and FDA regulations.
  • Filled out and maintained FDA documents that was turned in every shift.
  • Complied with ISO certifications and FDA regulations.
  • Produce product while adhering to FDA regulations.
  • Promoted to Lead Operator Lead Man- Overseeing the Production of Animal Pharmaceuticals Mixing Batches of Product under FDA Regulations Problem Solving
  • Line Operator/Warehouse associate Responsible for FDA/GMP production documentation.

Show More

43. Production Process

low Demand
Here's how Production Process is used in Utility Operator jobs:
  • Loaded conveyor with raw parts to complete the production process by machines which coated the parts.
  • Learned all aspects of the production process of the plant.
  • Monitor pumps and valves for the production process.
  • Investigate and fix any problems with production process.
  • Inspected finished products for quality and adherence to customer under specification and adjusted production processes or equipment for quality and productivity.
  • Operate equipment safely and effectively for production processing while ensuring equipment is maintained in good and safe working condition.

Show More

44. General Maintenance

low Demand
Here's how General Maintenance is used in Utility Operator jobs:
  • Administered Standard Operational Procedures, General Maintenance Procedures, Maneuver Control Systems, Building Maintenance Systems, and Piping instrument/Systematic diagrams.
  • General Maintenance, laboratory duties, troubleshooting, heavy machine operation
  • General maintenance and troubleshooting of presses and inspection equipment.
  • General maintenance and repair of all city owned properties and equipment.
  • Assist with general maintenance and clean-up of mill.Performed process testing.
  • Perform general maintenance and inspection of all mechanical systems associated with steam generation.

Show More

45. Tank Levels

low Demand
Here's how Tank Levels is used in Utility Operator jobs:
  • Adjust pumping systems, chemical feeders, auxiliary equipment, control systems, storage tank levels and pump stations indicators.
  • Maintain adequate water storage tank levels and pressures to meet water demand.
  • Adjusted pumping systems, chemical feeders,auxiliary equipment, control systems storagetank levels and pump stations indicators.
  • Monitor tank levels and process instrumentation; perform adjustments as necessary.
  • Monitored feed rates, tank levels, product blends, and temperatures on all equipment in a large industrial plant.
  • Maintain tank levels and monitor valve operation to ensure the integrity of the chemicals and the finished product.

Show More

46. Hazardous Materials

low Demand
Here's how Hazardous Materials is used in Utility Operator jobs:
  • Shift safety leader for Emergency Response Team for firefighting and hazardous materials* Permit / Procedure writer
  • Trained for DOT HM-181 transportation of hazardous materials.
  • Trained in hazardous materials controls.
  • Managed shipping and receiving operations for hazardous materials.
  • Handled and disposed of hazardous and non-hazardous materials.
  • Lined up valves on a DCS system and manually in the unit to transfer hazardous materials from one location/container to another.

Show More

47. EPA

low Demand
Here's how EPA is used in Utility Operator jobs:
  • Coordinate with the Environmental Department and sub-Contractor for pick-up and disposal of the hazardous material according to Federal Regulations.
  • Prepared operational schedules and coordinated manufacturing activities to ensure production and quality of products met specifications.
  • Influenced the development and implementation of standardized market and utility rules, focusing on prepay electricity.
  • Coordinated activities of production department in processing materials and manufacturing products in industrial establishment.
  • Worked for facilities department as a technician in the operations and maintenance organization.
  • Created and generated document to record discrepancies and/or to suggest product improvement changes.
  • Planned & supervised problem-solving projects involving modifications & fabrications for all departments.
  • Prepared pallets by following prescribed stacking arrangement and properly tagging pallets.
  • Coordinate actions among various departments and facilities to implement corrective measures.
  • Performed diagnosis and repairs of refrigeration package and process systems.
  • Scheduled delivery dates in order to plan department operations.
  • Perform utility job in carding department assisting machine operator.
  • Document all processes performed during repairs to ensure accountability.
  • Perform preventive maintenance and reparation to compressed freezer dryers.
  • Performed equipment maintenance including repairs, servicing and installation.
  • Operated and recorded quality data in furnace/heat treatment department
  • Provided assistance to maintenance and information technology departments.
  • Make appropriate repair recommendations for malfunctioning equipment.
  • Make necessary repairs to existing equipment.
  • Prepared oversea containers for shipping.

Show More

48. Unload Trucks

low Demand
Here's how Unload Trucks is used in Utility Operator jobs:
  • run all lines as needed, feed mill, flour mill, packaging department, load unload trucks and rail cars.
  • Load and unload Trucks, Tanks and Railcars Work with numerous chemicals (Ammonia, Acid, etc.)
  • Run machine to clean product, pull orders, load and unload trucks, put orders away, seal and wrap bins
  • Load and unload trucks, bin merchandise, pulling orders, move pallets, shipping and receiving, machine operator.
  • Placed yarn in racks for production employees and ensured yarn was on hand and load and unload trucks.
  • Run Molding machine -Inspect and pack Parts -load and unload trucks with fork lift -help with assembly of parts

Show More

49. Final Product

low Demand
Here's how Final Product is used in Utility Operator jobs:
  • Maintained calendar lines while monitoring machine operations Weighed, inspected and measured final product and documented results Operated fork truck
  • Load / unload all types of chemicals such as OSB, CH, Fuel Oil and final product.
  • Mixed raw material blend with PVA solution to produce batches of proppants meeting size specification of final product.
  • Maintain highest safety environment while maintaining the integrity of the final product.
  • Operated machinery and assisted in assembling final product, maintained quality and production standards.
  • Managed and controlled final product to ensure paper rolls conformed to customer specifications.

Show More

50. Computer System

low Demand
Here's how Computer System is used in Utility Operator jobs:
  • Controlled inventory by tracking and ordering products via specialized computer systems.
  • Documented/Logged work orders into company computer system.
  • Collected data daily and input that information into our computer system using Excel and Word.
  • Enter information into computer system to create coils tags and record location for inventory.
  • Record accurate production counts and defects and log into computer system.
  • SAP usage with computer system and proficient in Microsoft Office.
  • Upload or enter data into computer system.

Show More

20 Most Common Skill for an Utility Operator

Boilers16.4%
Safety Procedures12.7%
Plant Operations12%
Preventative Maintenance7.2%
Heavy Equipment5.4%
Water Treatment4.2%
Assembly Line4.2%
Osha3.7%

Typical Skill-Sets Required For An Utility Operator

RankSkillPercentage of ResumesPercentage
1
1
Boilers
Boilers
12%
12%
2
2
Safety Procedures
Safety Procedures
9.3%
9.3%
3
3
Plant Operations
Plant Operations
8.8%
8.8%
4
4
Preventative Maintenance
Preventative Maintenance
5.3%
5.3%
5
5
Heavy Equipment
Heavy Equipment
4%
4%
6
6
Water Treatment
Water Treatment
3.1%
3.1%
7
7
Assembly Line
Assembly Line
3.1%
3.1%
8
8
Osha
Osha
2.7%
2.7%
9
9
Air Compressors
Air Compressors
2.7%
2.7%
10
10
Chillers
Chillers
2.6%
2.6%
11
11
Water Systems
Water Systems
2.4%
2.4%
12
12
Front End Loader
Front End Loader
2.3%
2.3%
13
13
Troubleshoot
Troubleshoot
2.1%
2.1%
14
14
Hvac
Hvac
2.1%
2.1%
15
15
Machine Operation
Machine Operation
2%
2%
16
16
Water Samples
Water Samples
2%
2%
17
17
Raw Materials
Raw Materials
1.8%
1.8%
18
18
Bobcat
Bobcat
1.8%
1.8%
19
19
Rail Cars
Rail Cars
1.6%
1.6%
20
20
Hand Tools
Hand Tools
1.6%
1.6%
21
21
Setup
Setup
1.6%
1.6%
22
22
Control Room
Control Room
1.5%
1.5%
23
23
Reverse Osmosis
Reverse Osmosis
1.4%
1.4%
24
24
Quality Standards
Quality Standards
1.4%
1.4%
25
25
GMP
GMP
1.3%
1.3%
26
26
Dump Truck
Dump Truck
1.2%
1.2%
27
27
Quality Checks
Quality Checks
1.2%
1.2%
28
28
Supervisory Personnel
Supervisory Personnel
1.1%
1.1%
29
29
Data Entry
Data Entry
1.1%
1.1%
30
30
CNC
CNC
1.1%
1.1%
31
31
Production Equipment
Production Equipment
1%
1%
32
32
Pallet Jack
Pallet Jack
1%
1%
33
33
PPE
PPE
0.9%
0.9%
34
34
Daily Operations
Daily Operations
0.8%
0.8%
35
35
Hazmat
Hazmat
0.8%
0.8%
36
36
Product Quality
Product Quality
0.8%
0.8%
37
37
CPR
CPR
0.7%
0.7%
38
38
Storage Tanks
Storage Tanks
0.7%
0.7%
39
39
Loto
Loto
0.6%
0.6%
40
40
Water Pumps
Water Pumps
0.6%
0.6%
41
41
PLC
PLC
0.6%
0.6%
42
42
FDA
FDA
0.6%
0.6%
43
43
Production Process
Production Process
0.6%
0.6%
44
44
General Maintenance
General Maintenance
0.6%
0.6%
45
45
Tank Levels
Tank Levels
0.6%
0.6%
46
46
Hazardous Materials
Hazardous Materials
0.6%
0.6%
47
47
EPA
EPA
0.6%
0.6%
48
48
Unload Trucks
Unload Trucks
0.6%
0.6%
49
49
Final Product
Final Product
0.6%
0.6%
50
50
Computer System
Computer System
0.6%
0.6%

18,254 Utility Operator Jobs

Where do you want to work?