Value engineer jobs near me

About Us Trinity's core values represent an assurance of quality, professionalism, and reliability. To us, they are the foundation of our company, the standards against which we constantly judge ourselves. We are focused on client satisfaction, employee growth, and quality assurance. Trinity Consultants is committed to achieving optimal performance with minimal adverse environmental and societal impacts. Trinity is committed to the health and safety of our employees and the protection of the environment. Effective Health, Safety, and Environmental (HSE) protection in our business is every employee's responsibility for every activity that is conducted in our workplace or while at client facilities. ESSENTIAL DUTIES AND RESPONSIBILITIES Prepare air permit applications, for client projects in accordance with applicable local, state, and/or federal agency air regulations or standards. Perform emission calculations. Review and evaluate state and federal regulation applicability. Prepare, review, and submit regulatory reports and routine compliance reports as required by permits and applicable regulations. Review and analyze results of emissions testing. Knowledge or experience with air dispersion modeling. Assist clients with permitting strategy and developing pathways to continuous compliance. Communicate with clients and regulators as appropriate. Support preparation of proposals. Qualifications: Bachelor's, Master's, or other advanced degree in Environmental/Chemical/Civil Engineering. Minimum 2 years of experience in environmental consulting, focused on air quality. Advanced working knowledge of Excel and an understanding of the Windows operating system and Microsoft Office 365. Demonstrated understanding of state and federal air quality regulations and specific knowledge of general air permitting process: NSR, Title V, PSD, NSPS, NESHAP, BACT, etc. Excellent written and verbal communication skills and ability to coordinate and work effectively in a team setting. Ability to work independently in a remote work situation when needed. Excellent attention to detail and completeness. Must be able to perform multiple tasks with firm deadlines, sometimes deadlines could be simultaneous. (The specific statements shown in each section of this description are not intended to be all-inclusive. They represent typical elements and criteria necessary to successfully perform the job.) SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities.

Feasibility study of design concepts and product manufacturability. Identify and implement best practices from past models. Develop and establish efficient manufacturing processes Develop manufacturable and scalable design solutions by aligning engineering specifications with factory capabilities and project goals. Support physical verification of the vehicle during initial production at the factory. Ability to work with a team to identify and resolve design/manufacturing issues. Experienced in working on CATIA V6, 3DExperience and Delmia

Aerospace Lubricants, a division of AMSOIL INC, is currently seeking a Process Controls Engineer. This position is responsible for designing, implementing, and optimizing control systems to improve manufacturing efficiency, product quality, and safety. Aerospace Lubricants is a specialty grease manufacturer located in Columbus, Ohio. We manufacture products for everything from defense systems and spacecraft to offshore boats and motorcycles. Shift: Monday through Friday from 8:00AM to 5:00PM Core Responsibilities: • Design, develop, and maintain control systems including PLCs, HMIs, SCADA, and DCS platforms. • Program and configure automation equipment to support manufacturing processes. • Analyze process data to identify opportunities for improvement and implement control strategies. • Collaborate with process engineers, maintenance, and operations teams to troubleshoot and resolve control system issues. • Maintain documentation for control systems including schematics, code, and change logs. • Provide training and technical support to operations and maintenance personnel. • Accountable for knowing the manufacturing process including blending and packaging equipment. • Recommend preventive maintenance, predictive activities, and upgrade assessments. • Responsible for equipment-related uptime performance of the AMSOIL INC. production process including downtime tracking, lead uptime improvement projects, and report generation. • Work with other departments to develop and implement optimization strategies. • Justify and source new equipment required to optimize systems. • Ensure equipment FAT and SAT qualifications are completed. • Support Continuous Improvement initiatives to drive waste reduction and increase operational efficiency. • Participate or lead projects to improve quality, speed, and functionality of existing AMSOIL equipment and assets. • Manage projects related to AMSOIL INC. facilities, equipment, and new installs including bid packages, proposal evaluation, process design and functionality, budget management, and qualification and startup. Position Requirements: • Bachelor's degree in an Electrical Engineering or related Engineering (Industrial, Mechanical) or a 2-year technical degree with equivalent combination of related training and experience. • Experience in process controls engineering concepts. • Knowledge of PLC programming and interfacing control concepts into a manufacturing environment; preference for Allen Bradley experience or similar platform. • Experience with SCADA systems and data historians (Ignition - preferred). • Proven experience in practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of goods. • Knowledge of production processes and quality control techniques for maximizing the effective manufacturing and distribution of goods. • Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models. • Identify complex problems and review information to evaluate option and implement solutions. • Excellent written and verbal communication skills. • Desire to work within a team is necessary. • Competent in complete MS Office Suite. • Knowledge of JD Edwards or comparable ERP system. • Ability to manage multiple priorities. • Knowledge of SQL Databases. • Valid driver's license, clean driving record and the ability to be insurable for AMSOIL INC. vehicles. • This position does require travel 25% of the time. • Professional Engineer PE (preferred). • Lean Manufacturing / Six Sigma (preferred).

For more than 50 years, millions of professional truck drivers and motorists have called our travel centers home, depending on us daily for fuel, food, truck maintenance and essential services. Now a part of the bp family, TA is focused on growing its network of travel centers, implementing cutting edge technology and embarking on innovative alternative energy and sustainability initiatives. From our locations across the country, to our corporate headquarters in Westlake, Ohio, every team member is a stakeholder in TA's success. This environment offers endless career opportunities for individuals interested in sharing their ideas, growing with the company and shaping TA's future. **Summary** **(This role is hybrid and can be based at one of our locations: Westlake, OH, Chicago, IL, Louisville, KY or Houston, TX).** As a Continuous Improvement Engineer at TravelCenters of America, you will be responsible for analyzing and improving organizational processes with the aim of enhancing both new and existing operations through the implementation of continuous improvement methods. The Engineer will work closely with cross-functional teams to drive performance changes through data-driven continuous improvement, engineering, and automation efforts, aiming to improve safety, quality, delivery, and cost performance. Utilizing data analytics, engineering techniques, and advanced lean tools, the Engineer will identify and eliminate root causes. **Duties and Responsibilities** + **Data Collection and Analysis:** Conduct process mapping, statistical data analysis, and root cause analysis to identify inefficiencies and areas for improvement. Map and document processes. Independently identify process gaps, recommend, an implement process improvement. Develop and manage a comprehensive, effective, and timely continuous improvement plan to drive value for our customers (transformation plan development and execution). Drive process improvement activities to achieve tangible improvements in key business metrics such as safety, quality, delivery, cost, and employee development. + **Project Management:** Lead and facilitate continuous improvement projects using Lean, Six Sigma, and other methodologies to drive improved business results. Assess continuous improvement initiatives and provide input and recommendations for future activities. Support go-live and steady-state certifications. Identify and support automation projects. Regularly interact with operations management and/or customers. + **Engineering and Lean Competency:** Develop and demonstrate competency in a wide range of engineering methods, Lean tools, and quality standards. Coach employees in the use and implementation of continuous improvement, Quality Assurance and Lean principles. Apply engineering methodologies/tools such as process optimization, labor standards studies (time studies), layout optimization, data profiling and analysis, and resource modeling to improve Truck Service field and support center operations. + **Facilitation and Execution:** Effectively facilitate and execute Value Stream Maps and Kaizen Events through all stages (A3 charter ideations/creation, pre-work identification and completion, regular follow-up, and sustainment). Coach process owners on using lean methods to achieve operational excellence. + **Reporting and Strategy:** Provide regular reports of data and actions to measure progress against site objectives. Make optimization recommendations that align with Truck Service strategy. + **Additional responsibilities:** + Design, implement, monitor and maintain the QMS based on established company and/or industry standards. + Implement and monitor a standardized corrective action system. + Analyze customer feedback and develop strategies to enhance customer experience + Support regulatory compliance and certification requirements. + Support process improvements as appropriate related to Quality Assurance for a start-up or expansion. + Perform other duties as assigned. + "Ensure bp's safety, risk, and compliance culture and expectations are met. Prioritize safety in all aspects of the role and support the Believe in Zero safety philosophy." **Qualifications** + Bachelor's degree in Engineering, Business, or related field with at least five years of relevant experience within a similar industry preferred. + Intermediate skills in data visualization tools (Power BI, Tableau) and database programming (SQL). + Experience in developing and managing Leader Standard Work, Visual Management Systems, Management Accountability Systems, Plan-Do-Check-Act (PDCA), Value Stream Mapping, Kaizen, and 5S/Workplace Organization. + Proficiency in Microsoft Office Suite. + **This role requires at least 50% travel** + Intermediate understanding and experience in core engineering and data analysis functions such as slotting, utilization, labor planning, layouts and metrics. + Familiarity with CAD tools (e.g., AutoCAD), and Labor Management Systems. + Knowledge of truck service operations, data analytics, industrial engineering and Lean methods. + Understanding of maintenance and repair solutions and automation types, etc. + Familiar with fleet management, vehicle maintenance operations, managed transportation networks, and various equipment types (trucks, tractors, trailers). + Preferred certifications include Lean Six Sigma, and PMP Why join us At bp, we support our people to learn and grow in a diverse and ambitious environment. We believe that our team is strengthened by diversity. We are committed to fostering an inclusive environment in which everyone is respected and treated fairly. There are many aspects of our employees' lives that are meaningful, so we offer benefits ( ********************************************* to enable your work to fit with your life. These benefits can include flexible working options, a generous paid parental leave policy, and excellent retirement benefits, among others! We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. **Travel Requirement** Up to 50% travel should be expected with this role **Relocation Assistance:** This role is not eligible for relocation **Remote Type:** This position is a hybrid of office/remote working **Skills:** Air and nitrogen systems, Air and nitrogen systems, Alarm Management, Cause and effect charts, Centrifugal compressors, Centrifugal Pumps, Collaboration, Communication, Condition and performance monitoring, Conflict Management, Corrosion Management, Distillation, Diversity, Equity and Inclusion, Fired Heaters, Gas treatment and liquid recovery, Hazardous area classification, Heat and Material Balance, Heat Exchangers, Heat Transfer, Identification of critical equipment, Influencing, Instrument and protective systems, leading through our values, Oil Treatment {+ 8 more} **Legal Disclaimer:** We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, socioeconomic status, neurodiversity/neurocognitive functioning, veteran status or disability status. Individuals with an accessibility need may request an adjustment/accommodation related to bp's recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an adjustment/accommodation related to the recruitment process, please contact us . If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks.

The Role The Manufacturing Engineer is responsible for developing automated solutions, implementing new processes, optimizing existing processes, automated data collection, and executing the industrial control and programming strategy for GTI's production facilities. This position will work closely with the multiple teams to ensure flawless and quick speed to market. Success is gauged on the ability to deliver quality, detailed, and efficient solutions at scale. The Manufacturing Engineer will play a pivotal strategic role in priority projects from a feasibility standpoint through a full IQ, OQ, PQ validation and hand-off with a technical transfer to the site production team. They work collaboratively with multiple teams to deliver productivity improvements and Continuous Improvement. Responsibilities 50% travel required Coordinate the efforts of Engineering and technical resources based on Senior Leadership Priorities and Site 90-day plan priorities. Work with other departments (i.e. Prod Development, Project Management, Quality, Compliance, Operations, etc.) to integrate new systems. Dedicate start-up management support for selected complex project integrations. Ensures constant updates are provided to the VP of Manufacturing on the status of projects and improvement efforts in the facilities. SME for automated packaging equipment, flow wrappers, beverage line, multi-combi scales, bag filling equipment, integrations, and automation. Conduct studies, identify problems, recommend alternatives, and implement solutions in coordination with other teams. Develop and deploy automated solutions for numerous processes to gain efficiency and streamline workflows. Provide support to Start-up facilities via technical transfer: Staffing Equipment layout and requirements Construction hand off Regulatory engagement Best-practice processes Technical transfer related to equipment Work with integrators, contractors, and site personnel to bring new functionality online and to troubleshoot issues as they arise. Work with site maintenance and facilities personnel to develop and execute preventative maintenance plans. Maintain up to date as-built records and drawings for existing and new deployments. Integrate existing equipment with live data stream to dashboard with historian, report generation, alarms, notifications, and live visuals for site teams to track daily production. Other duties as assigned Qualifications Bachelor's degree in engineering and 5+ years Operations and Engineering experience in a manufacturing environment. Proven strategic experience in overseeing all aspects of large-scale manufacturing projects Knowledgeable of TPM-based continuous improvement methodology Knowledgeable of Engineering problem solving Able to diagnose complex technical systems and develop simple human-machine interface and training solutions for optimal operations. Experience in industrial networking/automation (SCADA-Ignition, ITOT, cyber security), controls experience (PLC - AB, Omron, Schneider, ladder logic \ STX), business and data analytics for manufacturing operations (Power Bi, Tableau,) vision systems, and robotics. Highly motivated, self-directed, innovative and able to work independently or among teams with keen judgement, common sense and resourcefulness Adapts and thrives in a demanding, start-up, fast-paced environment Possesses a high level of critical thinking Effective time-management skills and ability to multi-task Ability to work well with others while also completing individually assigned tasks. Operates with a high level of professionalism and integrity, including dealing with confidential information Must understand and comply with the rules, regulations, policies, and procedures of GTI Must have a solid understanding of the Medical Marijuana laws, rules and regulations set forth by the state; a pursuit to further their understanding and knowledge of the industry and the laws. Safety and Compliance Be aware of hazards in the workspace. Retain and understand department specific training. Report safety incidents/ concerns and comply with follow-up actions. Be compliant with area safety requirements, state regulations and PPE requirements. Follow GMP, biosecurity, sanitation or other quality and compliance requirements. Perform record keeping accurately and completely as directed by a lead or supervisor. Maintain and calibrate tools, equipment and machinery as directed by a lead or supervisor. Report and escalate safety & quality concerns. Working Conditions While performing the duties of this job, the employee is regularly required to perform reaching, grasping, bending, stooping, talking, hearing, seeing and repetitive motions. Must be able to sit and/or stand for extended periods of time while maintaining focus. Must be able to lift, carry, and balance up to 50 pounds (and up to 100 pounds with assistance) AND must be able to do so with extreme care and caution when working with product. Ability to work in a fast-paced, changing, and challenging environment Work involves daily exposure to allergens (such as cannabis, tree nuts, and coconut oil). Additional Requirements Must pass any and all required background checks Must be and remain compliant with all legal or company regulations for working in the industry Must possess valid driver's license Must be a minimum of 21 years of age Must be approved by state badging agency to work in cannabis industry The pay range is competitive and based on experience, qualifications, and/or location of the role. Positions may be eligible for a discretionary annual incentive program driven by organization and individual performance. Green Thumb Pay Range$90,000-$110,000 USD

Job Description If you're a strategic problem solver with a talent for making data-informed decisions, you could be a great fit for this full-time Industrial Process Engineer role with Quality Pork Processors! We need a meticulous and analytical person to help refine the daily processes at our Austin, MN company. THIS IS NOT A REMOTE POSITION. YOU MUST BE ABLE TO WORK FULL-TIME ON-SITE IN AUSTIN, MN. Not only do you earn a competitive salary of $70,000 - $90,000/year (based on experience), but you also receive these excellent benefits: Medical, dental, vision, and life insurance Paid vacation and 9 paid holidays effective immediately A 401(k) with matching A free onsite medical clinic Elevate your career and make a direct positive impact on our thriving business as an Industrial Process Engineer! Location Requirement: Candidates must currently reside in or near the Midwest or be willing to relocate to Austin, MN. This is an on-site position, and applicants must be legally authorized to work in the United States. Remote work or international living arrangements will not be considered. WHAT WE'RE LOOKING FOR Candidates must currently reside in or near the Midwest or be willing to relocate to Austin, MN. This is an on-site position, and applicants must be legally authorized to work in the United States Bachelor's degree in an engineering field such as industrial, mechanical, manufacturing, or civil Relevant engineering work or internship experience Ability to use calculus, trigonometry, algebra, and other types of math to perform basic and advanced calculations determining process productivity Excellent verbal and written communication skills with the ability to explain technical recommendations in layman's terms Strong leadership and interpersonal skills Flexible problem-solving skills Analytical skills with the ability to accurately evaluate and interpret data WHAT IT'S LIKE BEING AN INDUSTRIAL PROCESS ENGINEER As a vital member of our engineering team, you're responsible for analyzing our current manufacturing processes and implementing new strategies for improving efficiency while cutting costs and minimizing waste. You're motivated to optimize our production procedures, and you achieve this by managing schedules, enforcing quality control measures, and identifying areas for improvement in our manufacturing processes. Utilizing your math knowledge and project management skills, you evaluate data and develop ways to enhance our efficiency. Diligently, you coordinate services, examine employee responsibilities, and identify innovative tools or procedures to boost production. Attention to detail is crucial as you analyze data, design new control systems, and prepare documentation such as material lists, cost analyses, cost estimations, and purchase orders. You're pivotal to our continued success and future growth! ABOUT US Founded in 1989, we are a privately held meat processing company. Our mission is to safely process quality products as our team grows, protects, and represents our company values. With a workforce of over 1,300 people, we work hard to follow that mission. We are proud to have a very diverse staff. With one of the best safety records in the industry, we put the safety of our people first. As an organization, we strive to take good care of our people and provide them with a great place to work! Are you ready to tackle interesting challenges and put your problem-solving skills to the test? Don't miss out - apply today with our short initial application! Job Posted by ApplicantPro

Euclid Chemical is a fully owned subsidiary of RPM International (NYSE: RPM), one of the world's largest coatings companies. With over 110 years of experience, we provide innovative solutions to the construction and restoration markets through our extensive range of treatments, sealants, coatings, sealers, and decorative products. Recognized as a 2024 NE Ohio Top Workplace by Energage, Euclid Chemical prides itself on fostering a people-first culture that values collaboration, respect, and growth. Summary: The Cement Additives Process Engineer plays a pivotal role in driving business growth and profitability through strategic technical support and contribution to the sales process. This position is tasked with providing technical support and expertise of the cement manufacturing process to our cement additive sales team and customers. Proficiency in this role requires exceptional cement manufacturing, analytical, and communication skills to collaborate seamlessly with internal teams at Euclid Chemical and build strong, lasting relationships with external cement customers - both active and potential customers. This is a remote position, with Euclid Chemical's main campus located in Ceveland, OH. Responsibilities: Serve as a technical ambassador for the Euclid Chemical cement additive sales team. Subject matter expert to provide feedback and troubleshooting information for customers. Act as a technical expert on the latest cement manufacturing technologies, equipment, and best practices to maintain Euclid Chemical's competitive edge. Deliver customer support through industrial trials, mill audits, special projects, data analysis, and detailed reporting to retain existing customers and attract new ones Compile and analyze industrial trial process data, and prepare detailed reports providing conclusions and action items from industrial trial runs. Keep thorough and updated records of activity history with active and potential cement additive customers. Design and execution of plant industrial trials and mill audits. Maintenance and operation of portable pump equipment inventory to utilize during industrial trials. Collaborate with the Cement Additives Technical Manager and Cement Lab Manager to develop new products and enhance existing lines based on market trends, competitive analysis, and industrial trial results. Work collaboratively with Euclid Chemical Cement Additives Lab team in the development and improvement of laboratory ball mill methodologies for testing materials. Education and Experience: Bachelor's degree in engineering (chemical or mechanical) or chemistry - master's degree is preferred. Minimum of 5-7 years of experience in cement manufacturing process control or quality management. Skills and Qualifications: Advanced knowledge and understanding of cement manufacturing, cement chemistry, and raw and finish mill circuit operation. Basic understanding of cement additives chemistries. Ability to interpret lab outputs (e.g., XRD, clinker microscopy, isothermal calorimetry, and physical test results) to develop customer-specific strategies and product recommendations. Proficiency with cement standards (ASTM, CSA, etc.). Strong knowledge of milling equipment, particle classifiers, circuit configurations, and pyro processes for optimizing clinker performance. Advanced knowledge of MS Office computer software: Excel, PowerPoint, Word. Basic knowledge of MS Outlook, Teams, Edge Internet Browser. Knowledge of industry trends, including low clinker content cement production and co-grinding with alternative materials. Data analysis and report writing skills. Communication and interpersonal skills. Leadership and team management capabilities. Analytical and problem-solving abilities. The ability to design and execute plant industrial trials and mill audits. Travel: Willingness to travel as needed for customer meetings and plant industrial trials (up to 50%). Why join our team? Euclid Chemical offers an attractive package for personnel, company benefits include but are not limited to: Medical, Dental and Vision coverage Life Insurance Short Term/Long Term Disability Parental Leave 401k with company match Defined benefit pension plan Vacation and holiday time A company vehicle or car allowance Salary Range: $110,000 - $125,000 plus annual company bonus program Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability.

At Kovalus Separation Solutions (KSS) , we are committed to revolutionizing the separation industry through advanced technologies such as membrane filtration, ion exchange, evaporation, drying, and more. Our innovative solutions empower customers across the food & beverage, dairy, life sciences, and industrial markets to optimize production processes through concentration, purification, and contaminant removal. We also support clients in recycling valuable process chemicals, achieving high-purity water, and treating wastewater for reuse or safe discharge, helping them enhance sustainability. Our success is built on the collaborative efforts of our global team of dedicated professionals. As we continue to grow, we seek talented individuals who share our passion for innovation. Join us today and help deliver Separation Technologies for a Better Future™ . How You'll Add Value… As a Process Engineer for the Food, Dairy and Beverages Markets you will be instrumental in driving our growth in the sanitary industrial markets. Your technical expertise, ability to build strategic partnerships, and internal collaboration will contribute significantly to Kovalus' continued success. What you'll do… Position Information Based in our headquarters in Wilmington, Massachusetts, reporting to the Sr. Director of Process Engineering. Flexible work environment (3 days in the office, 2 days WFH) Remote position can be considered for the right candidate. Compensation Range: $75k-$92,800K Key Responsibilities Develop detailed process design work for commercial membrane separation processes using Spiral wound, Hollow fiber and tubular configurations and MF, UF, NF and RO technology. This will involve the design and specification of filtration systems, selection of the treatment conditions, development of P&IDs, controls philosophies and control sequences. Participate in on-site commissioning of commercial plants and assisting in training of the end user's operators. Develop test protocols for field pilots for the purpose of obtaining performance data for commercial opportunities, and draft pilot reports. What you'll bring… Required Qualifications Minimum of 2 years of experience in process engineering design, with a focus on food, dairy or beverage applications. Ability to travel up to 40% at times (average 25%) within North America, working closely with regional sales teams and product management. At least 1 year experience with use of spiral wound membranes in industrial applications, including food & beverage, and life science facilities. Bachelor's degree in chemical engineering , or food technology , or in another related discipline. This position is not eligible for sponsorship Preferred Qualifications 5 or more years of experience working with membrane system design and operation, with primary focus of Food, dairy or beverages filtration. Hands on experience working on the startup and troubleshooting of full-scale commercial membrane filtration systems. Desire to be an innovator and major contributor in delivering cutting edge separation solutions to our customers. Excellent verbal and written communication skills, with demonstrated experience in customer service, presentations, and relationship-building. Kovalus offers a comprehensive package that includes: Medical (4 plan options), Dental (2 plan options) and Vision insurances; 401K (match & fixed company contribution); health savings and flexible spending accounts; company provided basic life insurance policy with the option of selecting additional voluntary life insurance for self, spouse or dependents; disability insurances (short-term policy is company paid & long-term is split between company and employee); voluntary insurance plans for accident, critical illness and hospital indemnity; business and personal travel insurance; 10 paid holidays; vacation time; sick time; employee assistance program; educational assistance program; referral bonus; bereavement leave. All benefits are subject to applicable plan and program terms (including eligibility terms) and may be subject to change. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Come join our amazing team and work remote from home! The Senior Bankruptcy Process Engineer will be responsible for improving the Bankruptcy processes to ensure all attributes associated with a process are defined, effective controls are in place and are actively monitored for continuous improvement opportunities. Materially improve business performance, shape the deployment of continuous improvement methodology, and develop tools/analytics to drive cultural and organizational transformation to accomplish business objectives. Collaborate with senior business leaders, functional leaders, consults with multiple business units, and employees to understand needs, map current states, design future states, and deploy sustainable processes. Conducts all activities in adherence to all applicable investor timelines and in accordance with the company's policies and procedures, all US state and federal laws and regulations, wherein the company operates. The target pay for this position is $90,000 - $120,000 Annually. What you'll do: . • Learn all aspects of the business process, key performance drivers, and operational report metrics. • Gain expert knowledge of the operational systems and utilization within the business process. • Assist with scope management, change management and solution definition. • Create functional specifications for new or modified systems and processes. • Develop process maps and additional necessary business process management tools to assist the Bankruptcy leadership team in effectively managing the processes they own. • Analyze data and interrupt results, trouble shoot if results look incorrect and request changes to data as needed to meet business requirements. • Gather and document business requirements, formulate use cases, and participate in solution design. • Design, develop and enhance bankruptcy department workflow systems (Fiserv, Tempo). • Track requirements, provide status and ensure quality of solution throughout the project/initiative. • Responsible for User Acceptance Testing and may be responsible for management and completion of Quality Assurance Testing (when applicable). • Participate in project communications, training materials, and business procedures/documentation. • Conceptualize and design dashboards and reports that are representative of the business unit's productivity. • Create projects/ideas that will help gain efficiency, cost savings, visibility, and management of business unit activities via continuous improvement plans (CIPs) • Manage projects and business unit stakeholders in relation to project needs. Proactive engagement required. • Lead assigned projects within the organization through the project lifecycle, including analysis, specification, design, development, and deployment. • Analyze findings and implement process improvements to the business and/or leadership. • Build and execute effective project communication plans to ensure stakeholders, team members and impacted parties are appropriately apprised of the project goals, expectations, status, and delivery. • Establish key performance metrics, design reporting/dashboard solutions, and promote the use of structured information to drive enhanced business performance. • Function as the Project Manager for all bankruptcy related projects. Ensure proper and timely communication of project milestones. • Performs other duties and special projects as assigned. What you'll need: • High school diploma or equivalent work experience. • Knowledge of various Bankruptcy platforms used within Loan Servicing • Extensive knowledge of Tempo Application • A strong working knowledge of all the bankruptcy processes and all Chapters; as well as knowledge of investor and regulatory requirements • Strong Microsoft Excel, data analysis and process improvement skillsets • Strong understanding of software development, lifecycle, and program/project management • Proficient with Microsoft Office, SQL Server Management Studio, Word, Visio, PowerPoint, and Project • Five (5) years' experience required in bankruptcy with increasing responsibilities in the banking, finance, or mortgage industry. • Four plus (4+) years' experience working with continuous improvement methodologies like Lean Manufacturing or Six Sigma related experience. Yellow belt preferred. • Four plus (4+) years' experience in successfully managing projects and/or initiatives under aggressive timelines. Our Company: Carrington Mortgage Services is part of The Carrington Companies, which provide integrated, full-lifecycle mortgage loan servicing assistance to borrowers and investors, delivering exceptional customer care and programs that support borrowers and their homeownership experience. We hope you'll consider joining our growing team of uniquely talented professionals as we transform residential real estate. To read more visit: *************************** What We Offer: Comprehensive healthcare plans for you and your family. Plus, a discretionary 401(k) match of 50% of the first 4% of pay contributed. Access to several fitness, restaurant, retail (and more!) discounts through our employee portal. Customized training programs to help you advance your career. Employee referral bonuses so you'll get the opportunity to work with friends (and get some extra cash in your pocket!). Educational Reimbursement. Carrington Charitable Foundation contributes to the community through causes that reflect the interests of Carrington Associates. For more information about Carrington Charitable Foundation, and the organizations and programs, it supports through specific fundraising efforts, please visit: carringtoncf.org. #Carrington #LI-GV1

at Samtec, Inc Founded in 1976, Samtec is a leading global manufacturer of electronic interconnect solutions, generating $950 million in annual revenue. Our extensive product portfolio includes High-Speed Board-to-Board, High-Speed Cables, Optics for Mid-Board and Panel, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers drive innovation to optimize system performance and cost across all interconnect points, supported by a presence in 40+ international locations and products distributed in over 125 countries, ensuring exceptional customer service worldwide. Summary/Objective The Plating Process Development Engineer is responsible for research, development, and the integration of new plating/coating technology into Samtec production processes related to electrochemistry, plating, and other advanced/novel materials. This position will work closely with The New Ventures, Material Innovation, and Plating Process Engineering Groups to onboard new plating/coating technology.Essential Functions/ Responsibilities. Design and execute experiments related to novel materials and manufacturing processes in electrochemical deposition. Characterize deposited microstructures and coordinate internal/external analytical laboratory projects and efforts. Execute laboratory projects for the Materials Innovations Group and the Plating Process Engineering Teams. Support the research, development and implementation of new materials/technologies and the troubleshooting of plating quality issues. Work with chemical and equipment suppliers to introduce new plating processes and analysis methods. Integrate/transition novel plating technologies into Samtec's production processes and products. Facilitate new plating technologies through product testing and production processes qualifications. Maintain lab procedure documents, ensuring they are updated, meeting all requirements for safety and environmental standards. The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities. Required Experience and Education 10+ years experience in electro-plating, electrolytic plating, or any similar process concerning surface coatings. Scanning electron microscope, x-ray diffraction, elemental and chemical spectroscopic experience. Essential functions of the job include the ability to stand, lift, and walk on a continual basis. Experience in Reel-to-Reel plating / Strip Line plating is required. Must be willing to work in a chemical environment. Must be able to work with heavy drums of chemicals with a drum dolly. Facilitate new plating technologies through product testing and production processes qualifications. Must be a self-starter with strong teamwork skills. Must be able to work independently and learn quickly. Good communication skills both written and verbal. Preferred Experience and Education Bachelor's Degree in Chemistry, Chemical Engineering, Material Science or equivalent Training in Lean manufacturing, Continuous Improvement, Statistical Process Control, and Six Sigma Experience in the operation and maintenance of analytical equipment. Experience can supplement or replace educational preferences/requirements. SAMTEC, Inc. is an Equal Opportunity Employer and committed to creating a diverse environment. All employment decisions at Samtec are based in business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, pregnancy or parental status, age, disability, sexual orientation, gender and/or gender identity/expression, marital status, past or present military service, family medical history or genetic information, or any other status protected by applicable laws. Privacy Policy: *****************************************************

For more than 50 years, millions of professional truck drivers and motorists have called our travel centers home, depending on us daily for fuel, food, truck maintenance and essential services. Now a part of the bp family, TA is focused on growing its network of travel centers, implementing cutting edge technology and embarking on innovative alternative energy and sustainability initiatives. From our locations across the country, to our corporate headquarters in Westlake, Ohio, every team member is a stakeholder in TA's success. This environment offers endless career opportunities for individuals interested in sharing their ideas, growing with the company and shaping TA's future. Summary (This role is hybrid and can be based at one of our locations: Westlake, OH, Chicago, IL, Louisville, KY or Houston, TX). As a Continuous Improvement Engineer at TravelCenters of America, you will be responsible for analyzing and improving organizational processes with the aim of enhancing both new and existing operations through the implementation of continuous improvement methods. The Engineer will work closely with cross-functional teams to drive performance changes through data-driven continuous improvement, engineering, and automation efforts, aiming to improve safety, quality, delivery, and cost performance. Utilizing data analytics, engineering techniques, and advanced lean tools, the Engineer will identify and eliminate root causes. Duties and Responsibilities Data Collection and Analysis: Conduct process mapping, statistical data analysis, and root cause analysis to identify inefficiencies and areas for improvement. Map and document processes. Independently identify process gaps, recommend, an implement process improvement. Develop and manage a comprehensive, effective, and timely continuous improvement plan to drive value for our customers (transformation plan development and execution). Drive process improvement activities to achieve tangible improvements in key business metrics such as safety, quality, delivery, cost, and employee development. Project Management: Lead and facilitate continuous improvement projects using Lean, Six Sigma, and other methodologies to drive improved business results. Assess continuous improvement initiatives and provide input and recommendations for future activities. Support go-live and steady-state certifications. Identify and support automation projects. Regularly interact with operations management and/or customers. Engineering and Lean Competency: Develop and demonstrate competency in a wide range of engineering methods, Lean tools, and quality standards. Coach employees in the use and implementation of continuous improvement, Quality Assurance and Lean principles. Apply engineering methodologies/tools such as process optimization, labor standards studies (time studies), layout optimization, data profiling and analysis, and resource modeling to improve Truck Service field and support center operations. Facilitation and Execution: Effectively facilitate and execute Value Stream Maps and Kaizen Events through all stages (A3 charter ideations/creation, pre-work identification and completion, regular follow-up, and sustainment). Coach process owners on using lean methods to achieve operational excellence. Reporting and Strategy: Provide regular reports of data and actions to measure progress against site objectives. Make optimization recommendations that align with Truck Service strategy. Additional responsibilities: Design, implement, monitor and maintain the QMS based on established company and/or industry standards. Implement and monitor a standardized corrective action system. Analyze customer feedback and develop strategies to enhance customer experience Support regulatory compliance and certification requirements. Support process improvements as appropriate related to Quality Assurance for a start-up or expansion. Perform other duties as assigned. “Ensure bp's safety, risk, and compliance culture and expectations are met. Prioritize safety in all aspects of the role and support the Believe in Zero safety philosophy.” Qualifications Bachelor's degree in Engineering, Business, or related field with at least five years of relevant experience within a similar industry preferred. Intermediate skills in data visualization tools (Power BI, Tableau) and database programming (SQL). Experience in developing and managing Leader Standard Work, Visual Management Systems, Management Accountability Systems, Plan-Do-Check-Act (PDCA), Value Stream Mapping, Kaizen, and 5S/Workplace Organization. Proficiency in Microsoft Office Suite. This role requires at least 50% travel Intermediate understanding and experience in core engineering and data analysis functions such as slotting, utilization, labor planning, layouts and metrics. Familiarity with CAD tools (e.g., AutoCAD), and Labor Management Systems. Knowledge of truck service operations, data analytics, industrial engineering and Lean methods. Understanding of maintenance and repair solutions and automation types, etc. Familiar with fleet management, vehicle maintenance operations, managed transportation networks, and various equipment types (trucks, tractors, trailers). Preferred certifications include Lean Six Sigma, and PMP Why join us At bp, we support our people to learn and grow in a diverse and ambitious environment. We believe that our team is strengthened by diversity. We are committed to fostering an inclusive environment in which everyone is respected and treated fairly. There are many aspects of our employees' lives that are meaningful, so we offer benefits ( ********************************************* to enable your work to fit with your life. These benefits can include flexible working options, a generous paid parental leave policy, and excellent retirement benefits, among others! We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Travel Requirement Up to 50% travel should be expected with this role Relocation Assistance: This role is not eligible for relocation Remote Type: This position is a hybrid of office/remote working Skills: Air and nitrogen systems, Air and nitrogen systems, Alarm Management, Cause and effect charts, Centrifugal compressors, Centrifugal Pumps, Collaboration, Communication, Condition and performance monitoring, Conflict Management, Corrosion Management, Distillation, Diversity, Equity and Inclusion, Fired Heaters, Gas treatment and liquid recovery, Hazardous area classification, Heat and Material Balance, Heat Exchangers, Heat Transfer, Identification of critical equipment, Influencing, Instrument and protective systems, leading through our values, Oil Treatment {+ 8 more} Legal Disclaimer: We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, socioeconomic status, neurodiversity/neurocognitive functioning, veteran status or disability status. Individuals with an accessibility need may request an adjustment/accommodation related to bp's recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an adjustment/accommodation related to the recruitment process, please contact us. If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks.

Descripción Puesto en Samtec, Inc Founded in 1976, Samtec is a leading global manufacturer of electronic interconnect solutions, generating $950 million in annual revenue. Our extensive product portfolio includes High-Speed Board-to-Board, High-Speed Cables, Optics for Mid-Board and Panel, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers drive innovation to optimize system performance and cost across all interconnect points, supported by a presence in 40+ international locations and products distributed in over 125 countries, ensuring exceptional customer service worldwide. Summary/Objective The Plating Process Development Engineer is responsible for research, development, and the integration of new plating/coating technology into Samtec production processes related to electrochemistry, plating, and other advanced/novel materials. This position will work closely with The New Ventures, Material Innovation, and Plating Process Engineering Groups to onboard new plating/coating technology.Essential Functions/ Responsibilities. Design and execute experiments related to novel materials and manufacturing processes in electrochemical deposition. Characterize deposited microstructures and coordinate internal/external analytical laboratory projects and efforts. Execute laboratory projects for the Materials Innovations Group and the Plating Process Engineering Teams. Support the research, development and implementation of new materials/technologies and the troubleshooting of plating quality issues. Work with chemical and equipment suppliers to introduce new plating processes and analysis methods. Integrate/transition novel plating technologies into Samtec's production processes and products. Facilitate new plating technologies through product testing and production processes qualifications. Maintain lab procedure documents, ensuring they are updated, meeting all requirements for safety and environmental standards. The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities. Required Experience and Education 10+ years experience in electro-plating, electrolytic plating, or any similar process concerning surface coatings. Scanning electron microscope, x-ray diffraction, elemental and chemical spectroscopic experience. Essential functions of the job include the ability to stand, lift, and walk on a continual basis. Experience in Reel-to-Reel plating / Strip Line plating is required. Must be willing to work in a chemical environment. Must be able to work with heavy drums of chemicals with a drum dolly. Facilitate new plating technologies through product testing and production processes qualifications. Must be a self-starter with strong teamwork skills. Must be able to work independently and learn quickly. Good communication skills both written and verbal. Preferred Experience and Education Bachelor's Degree in Chemistry, Chemical Engineering, Material Science or equivalent Training in Lean manufacturing, Continuous Improvement, Statistical Process Control, and Six Sigma Experience in the operation and maintenance of analytical equipment. Experience can supplement or replace educational preferences/requirements.

Process Engineer Reports To: Engineering Manager Supervises: None Classification: Salaried, exempt, non-union Essential Duties & Responsibilities: The statements below are intended to describe the general nature and level of work being performed by the employee of this position. They are not intended to be an exhaustive list of all responsibilities and activities required of this position. Create and ensure that all part documentation includes drawings, process specifications, process routings, control plans, and operating instructions Ensure Engineering Change Requests (ECRs) are applicable and meet engineering specified standards Complete engineering documentation in a timely manner as determined by the department and related company goals Create new and robust processes with a focus on repeatability and efficiency Contribute to continuous improvement analyses to ensure the product being manufactured will satisfy quality requirements and meet or exceed cost objectives Originate ideas to solve engineering and manufacturing challenges from current and potential customers Assist in shop floor layouts leading to production efficiencies Determine appropriate packaging requirements and processes Design, order and maintain tooling appropriate for part processing Coordinate the efforts of operators to meet technical, safety, quality and cost objectives. Interface with Sales (and customers if required), Quality, and Scheduling during AQP and order review process. Additional duties as assigned Requirements: To perform this position successfully, the employee must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties. This position involves access to technical data that is subject to the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR), which define a “U.S. person” to include a U.S. citizen, lawful permanent resident (green card holder), or a protected individual as defined by 8 U.S.C. 1324b(a)(3). Employment is contingent upon the applicant's ability to meet these requirements or the Company's ability to obtain an export license on the applicant's behalf. Minimum of a Bachelor's degree or equivalent and at least two years of related experience and/or equivalent education & experience Previous experience in CNC Programming is preferred Previous experience creating fixture tooling/die design is required Previous experience using CAD and/or forging simulation software is highly preferred Proficient in Microsoft Excel, Word, Outlook Prior experience working with an ERP/MRP system is preferred Prior working knowledge of forged non-ferrous materials is preferred Demonstrated problem solving skills and excellent organizational and communication skills Ability to multi-task Position is required to be on-site, occasional work from home with supervisor approval is available Supports and demonstrates the Company's core values Working Conditions: This position is designed to work full-time. Days and hours of work are typically Monday through Friday, 8:00 a.m. to 5:00 p.m. An alternate schedule may be arranged or assigned based on the business demands, nature of duties performed, and other factors. Occasional flexibility to work evenings or weekends may be required as job responsibilities demand. Regular work, after hours and/or weekend work may be performed remotely, if the capability exists. Little to no travel is expected for this position. This position mainly operates in an office environment during work hours, but may be expanded to assist and support employees in other departments within the Company; Occasional exposure to production equipment and machinery. The employee will manage multiple priorities daily and may be interrupted frequently to meet the needs and requests of employees. The environment may be busy and noisy. All required personal protective equipment is provided. Physical Demands: While performing the duties of this job, the employee will spend most of his/her time sitting using computers and standard office equipment such as phones, photocopiers and fax machines. Occasional moving and/or lifting of 10 pounds, stooping, bending and reaching with hands and arms. While performing these job duties, the employee is regularly required to see, talk, and hear. Weldaloy Products Company provides Equal Employment Opportunity (EEO) to all applicants without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, veteran status, height, weight or arrest record in accordance with applicable federal, state and local laws.

OPPORTUNITY For a motivated engineer with a passion for the food & beverage industry to provide design services for clients throughout North America. Join an integrated team of architects, engineers and project managers and engage in challenging projects up to $500 million for many of the biggest brands in the industry. This key role will execute a broad set of engineering competencies, food processing knowledge and problem-solving skills as well as provide mentorship to others in an environment that values collaboration. POSITION Reports directly to the VP/Manager of Process Engineering. Participates on design teams with an emphasis on food manufacturing and processing equipment, process equipment layout and sanitation/CIP systems. Projects range from master planning exercises to conceptual & detailed design, and finish with startup & commissioning. This position will proactively interact with the client, vendors, contractors and Hixson's architecture and engineering teams. CANDIDATE 10+ years of experience in process engineering and design in food & beverage, nutraceutical, or related industries B.S. in chemical or food engineering; P.E. a plus Proven ability to develop BFDs, PFDs and P&IDs Experience leading HAZOPs and FMEAs Proficient in design and specification of process systems and equipment Competence in AutoCAD and process simulation software Strong interpersonal skills to work effectively with clients and associates COMPANY Located at the base of historic Mt. Adams, Hixson Architecture, Engineering, Interiors was formed in 1948 and is consistently listed as one of the top A/E firms in the United States. Fostering a culture that is different by design, Hixson manages by values, not by business objectives, and believes that by taking care of its associates, success follows. Add to this a prioritization of professional development, community service and living a balanced life, it all makes for a great place to work. To learn more about life at Hixson, please visit ******************* COMPENSATION Commensurate with experience, plus excellent benefits package: comprehensive health insurance, life insurance, paid time off, paid parental leave, 401K match, profit sharing, end-of-year bonus plan, remote work flexibility, tuition reimbursement, on-site fitness center, free parking and more.

Job Description Construction Materials Engineer . Are you a Construction Materials Engineer seeking a challenging opportunity to grow your career with a firm committed to our employees and providing high-quality service to our clients? S&ME is looking for an eager and dedicated full-time Construction Materials Engineer to join our Construction Services team in Columbus, Ohio. At S&ME, we have a history of delivering innovative geotechnical, civil, environmental, and construction material testing for over 50 years. Over the decades, we have grown into a trusted partner for clients across various industries, including transportation, energy, water, waste management, education, government, commercial, industrial, and more. Our commitment to technical excellence and integrity has established us as a leader in our field. .Why Work at S&ME? Professional Growth: We believe in providing continuous learning opportunities, mentorship programs, and a supportive work environment. Let us tell you more about that! Innovative Projects: Join a team that works on diverse and challenging projects of all sizes and complexities, including but not limited to airports, solar farms, power plants, schools, trails, mixed-use, sports stadiums, dams, museums, and more. Inclusive Culture: Our culture is built on collaboration and mutual respect. We want you to want to come into the office to build relationships, laugh together, learn from each other, and enjoy the time with your teammates and colleagues. Work-Life Balance: We believe in a flexible working environment, allowing you and your manager to determine how you can work most effectively and collaboratively to meet your client, team, and personal commitments. Community Impact: Our work creates lasting, positive impacts on the communities we serve. We pride ourselves on our technical excellence, quality work and client satisfaction to continue making a difference. .About The Role: The Construction Materials Engineer role involves leading field inspection and laboratory testing operations on geotechnical and construction projects. You'll ensure regulatory compliance and quality standards while providing mentorship to field staff and strengthening client relationships. Project Oversight: Supervise geotechnical and materials testing projects from planning through final reporting. Client Collaboration: Engage with clients to understand project goals and provide tailored solutions. Team Leadership: Mentor and lead field staff while promoting a strong safety culture. Coordination: Work closely with lab and field teams to ensure timely and high-quality project execution. Business Development: Contribute to market growth through client relationships and technical excellence. .About You: You have a Bachelor's degree in Civil, Geotechnical Engineering, or a closely related field. You have a minimum of 5 years of experience in construction inspections, geotechnical services, or special inspections. You have or can obtain a Professional Engineer (PE) license within six months of hire. You have a solid understanding of ASTM, AASHTO, DOT standards, and IBC Special Inspections. You are willing to work in field conditions and can safely handle equipment and lift up to 50 lbs. .Grow With Us: At S&ME, your career growth matters. You'll receive professional training, work on exciting projects, and be part of a company that truly invests in its people. This is more than a job; it's a chance to build a long-term career in the engineering and construction industry. S&ME provides a comprehensive benefits package to support you and your family, as well as career development resources. Come grow and thrive with us at S&ME! Medical, Dental & Vision Plans with HSA and FSA options 100% Employee Stock Ownership Plan (ESOP) 401K with Company Matching PTO with Rollover Maternity/Paternity Leave Employee Recognition Program Credential Incentive Program Tuition Reimbursement Company Vehicle with Fuel Card for Project-Based Work $2,000 Referral Bonuses & More! .Join us at S&ME! This full-time role offers competitive pay based on experience. Candidates must comply with our Fleet Management, Substance Policy, and Reference Check requirements. Only candidates with valid employment eligibility (I-9) will be considered. Visa assistance is not available. S&ME reserves the right to hire internally or externally at any time. No candidate/recruiter calls, personal calls, or walk-ins are accepted. Job Posted by ApplicantPro

Responsibilities: Ability to identify Manufacturing Process Constraints Design and implement Manufacturing Process Improvements Verify BOM accuracy Identify and implement Methods improvements Document and preparation of work instructions Identify and select Manufacturing Capital Equipment and prepare necessary appropriations requests Compare forecasts against Machine and Process capacities and implement improvement plans Time standard development, establishing unique routing for special products, advising Product Engineering on product development and design, and participating in appropriate cross-functional programs and projects Requirements: BSME/IE/Business Operations Management and 0-3 years professional Manufacturing experience; or a 2-year technical degree and 3-5 years professional Manufacturing experience; or a High School Diploma and 5+ years professional Manufacturing experience MRP Proficiency required Preferred Qualifications: Understand and apply Methods Analysis Mechanical aptitude and knowledge of Products and Processes Design tooling and manufacturing fixtures PC Proficient EDUCATION AND CERTIFICATIONS BSME/IE/Business Operations Management and 0-3 year(s) professional Manufacturing experience; or a 2-year technical degree and 3-5 years professional Manufacturing experience; or a High School Diploma and 5+ years professional Manufacturing experience PHYSICAL REQUIREMENTS No Special Physical Requirements ENVIRONMENTAL DEMANDS N/A TRAVEL TIME REQUIRED N/A OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development Promote Transparent & Open Communication At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $5 billion in sales, a strong customer base and global reach in nearly 70 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire.

Our Company PharMerica PharMerica is are seeking a seasoned Process Engineer with a strong background in pharmacy operations to drive continuous improvement and operational excellence across our pharmacy services. The ideal candidate will have 3-5 years of hands-on experience in process engineering. Experience working in a Long-Term Care (LTC) pharmacy environment is a plus. This role requires a strategic thinker with a passion for optimizing workflows, leveraging automation, and integrating emerging technologies such as Generative AI (GenAI), Large Language Models (LLMs), and Agentic AI. Remote opportunity. Applicants can live anywhere within the Continental USA. Travel: 25-50% Schedule: Monday - Friday, 8:00am - 5:00pm We offer: DailyPay Flexible schedules Competitive pay Shift differential Health, dental, vision and life insurance benefits Company paid STD and LTD Tuition Assistance Employee Discount Program 401k Paid-time off Tuition reimbursement Non-retail/Closed-door environment This position will be posted a minimum of 5 days Responsibilities Analyze existing pharmacy workflows and identify opportunities for standardization, process improvement, automation, and cost reduction Develop and maintain process maps, SOPs, and documentation to support operational consistency and compliance Lead Lean and Six Sigma initiatives to enhance efficiency, reduce waste, and improve service quality Collaborate with cross-functional teams including IT, operations, and clinical staff to implement innovative solutions Evaluate and integrate AI technologies (GenAI, LLMs, Agentic AI) to streamline decision-making, documentation, and customer service processes Monitor performance metrics and KPIs to assess the impact of process changes and drive data-informed decisions Support change management efforts and training programs to ensure successful adoption of new processes and technologies Qualifications Required Qualifications: Bachelor's degree in Engineering, Industrial Engineering, Pharmacy, or related field. 3-5 years of experience in process engineering, preferably in a pharmacy or healthcare setting. Proven expertise in Lean, Six Sigma, or other continuous improvement methodologies (Green Belt or higher preferred). Proficiency in process mapping tools (e.g., Visio, Lucidchart) and data analysis platforms (e.g., Excel, Power BI). Familiarity with automation technologies, GenAI, LLMs, and Agentic AI applications in operational settings. Strong analytical, problem-solving, and project management skills. Excellent communication and stakeholder engagement abilities. Preferred Qualifications: Experience in Long-Term Care (LTC) pharmacy operations. Exposure to regulatory compliance in pharmacy or healthcare environments. Experience with digital transformation initiatives or AI implementation in operational workflows. Key Competencies Strategic Thinking Innovation & Technology Adoption Process Optimization Cross-functional Collaboration Data-Driven Decision Making Change Management Travel Requirements: 25-50% travel About our Line of Business PharMerica, an affiliate of BrightSpring Health Services, is a full-service pharmacy solution providing value beyond medication. PharMerica is the long-term care pharmacy services provider of choice for senior living communities, skilled nursing facilities, public health organizations, and post-acute care organizations. PharMerica is one of the nation's largest pharmacy companies, offering unmatched company culture, employee development, and advancement opportunities. For more information, please visit ******************* Follow us on Facebook, LinkedIn, and X.

What Makes a Honda, is Who makes a Honda Honda has a clear vision for the future, and it's a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.” We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team. If your goals and values align with Honda's, we want you to join our team to Bring the Future! Job Purpose: Serve as a Process Engineer responsible for assembly process development and determining the sequence of assembly for new spec parts based upon existing process/parts lay out/process standard time (ST) and/or the maintenance and optimization of established process. Key Accountabilities: Use M.O.S.T. To develop balanced processes across manufacturing areas. Work to achieve high process efficiency. Apply lean manufacturing techniques. Design processes that are simple and achieve SQCDM targets. Identify opportunities to reduce waste within the process and improve efficiency. Apply 5S work methods, workstation design, and set best practices for production. Audit big data to ensure accurate information across all operation standards. Mobilize Excel formulas and VBA coding to optimize tasks. Support New Model events. Forecast design impact to department. Incorporate change points into process design. Identify concerns and countermeasures before mass production. Perform time estimates for assembly line work, equipment loads and develop operation standards. Conduct studies to determine the most efficient sequence of operations and workflow and recommends methods for maximum utilization of production facilities and personnel Regularly lead meetings with other Honda functional groups to develop and launch improvement themes (quality, safety, delivery, production, purchasing, packaging, or logistics) Collect feedback from the production floor and address their concerns. Evaluate and implement ergonomic countermeasures to prevent associate injury. Develop plans and schedules for projects. Set timelines and detailed activities. Hold meetings with cross functional engineering groups to ensure completeness. Project support for all items impacting assembly department's associate process. Qualifications, Experience, and Skills: Bachelor's Degree in Engineering (e.g., Industrial, Manufacturing, Mechanical, or similar); or 6 years relevant experience required 0-6 years' experience based on education Knowledge of: Process Data Development and Analysis (PDDA); process engineering (MOST); parts numbers, BOM, and applications; Assembly (AF) quality control systems and specification; Assembly (AF) techniques and processes; New model project development; quality control systems and workflows; Assembly (AF) department layout and equipment. Skill in: Analytical problem solving and decision making; communicating change to others, root cause analysis, collaboration with others, and self-driven. Working Conditions: Shift schedule is primarily a first shift position but at times require supporting additional shifts/hours Position could require some travel to other HDMA locations or supplier locations Position could require daily overtime or Saturday overtime Position could require DPC coverage to the production floor 50% Fast-paced high-energy manufacturing environment, 50% office environmen Visa sponsorship issues This position is not eligible for work visa sponsorship. What differentiates Honda and make us an employer of choice? Total Rewards: Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.) Paid Overtime Regional Bonus (when applicable) Industry-leading Benefit Plans (Medical, Dental, Vision, Rx) Paid time off, including vacation, holidays, shutdown Company Paid Short-Term and Long-Term Disability 401K Plan with company match + additional contribution Relocation assistance (if eligible) Career Growth: Advancement Opportunities Career Mobility Education Reimbursement for Continued Learning Training and Development programs Additional Offerings: Tuition Assistance & Student Loan Repayment Lifestyle Account Childcare Reimbursement Account Elder Care Support Wellbeing Program Community Service and Engagement Programs Product Programs Free Drinks Onsite Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Continental develops pioneering technologies and services for sustainable and connected mobility of people and their goods. Founded in 1871, the technology company offers safe, efficient, intelligent and affordable solutions for vehicles, machines, traffic and transportation. In 2020, Continental generated sales of 37.7 billion and currently employs more than 192,000 people in 58 countries and markets. On October 8, 2021, the company celebrated its 150th anniversary. The ContiTech business area focuses on smart and sustainable solutions beyond rubber and develops digital and intelligent solutions in future-oriented sectors. In doing so, ContiTech draws on its long-standing knowledge of the industry and materials to open up new business opportunities by combining various materials with electronic components and individual services. The products, systems and solutions developed by ContiTech are used both in the automotive industry as well as in railway engineering, machine and plant construction, mining, agriculture and other important sectors of the future. + Entering Production Order data + Working on data gathering to help assist in process improvement projects + Actively participating in root cause analysis meeting for quality issues in the plant Other duties as assigned + Learning about conveyor belt processing defects Conveyor belt lab testing requirements and processes - Completion of 2nd year of college/university courses by working towards BS in Materials Science Engineering or Industrial Engineering degree. - 3.0 GPA - Computer skills in Word and Excel. - Ability to work 40 hours per week in the summer and a minimum of 10 hours per week during the school year. HS Diploma EEO / AA / Disabled / Protected Veteran Employer. Continental offers equal employment opportunities to all qualified individuals, without regard to unlawful consideration to race, color, sex, sexual orientation, gender identity, age, religion, national origin, disability, veteran status, or any other status protected by applicable law. In addition, as a federal contractor, Continental complies with government regulations, including affirmative action responsibilities, where they apply. To be considered, you must apply for a specific position for which Continental has a current posted job opening. Qualifying applications will be considered only for the specific opening(s) to which you apply. If you would like to be considered for additional or future job openings, we encourage you to reapply for other opportunities as they become available. Further, Continental provides reasonable accommodations to qualified individuals with a disability. If you need assistance in the application process, please reply to ******************** or contact US Recruiting at ************. This telephone line and email address are reserved solely for job seekers with disabilities requesting accessibility assistance or an accommodation in the job application process. Please do not call about the status of your job application, if you do not require accessibility assistance or an accommodation. Messages left for other purposes, such as following up on an application or non-disability related technical issues, will not receive a call back. **EEO-Statement:** EEO / AA / Disabled / Protected Veteran Employer. Continental offers equal employment opportunities to all qualified individuals, without regard to unlawful consideration to race, color, sex, sexual orientation, gender identity, age, religion, national origin, disability, veteran status, or any other status protected by applicable law. In addition, as a federal contractor, Continental complies with government regulations, including affirmative action responsibilities, where they apply. To be considered, you must apply for a specific position for which Continental has a current posted job opening. Qualifying applications will be considered only for the specific opening(s) to which you apply. If you would like to be considered for additional or future job openings, we encourage you to reapply for other opportunities as they become available. Further, Continental provides reasonable accommodations to qualified individuals with a disability. If you need assistance in the application process, please reply to ******************** or contact US Recruiting at ************. This telephone line and email address are reserved solely for job seekers with disabilities requesting accessibility assistance or an accommodation in the job application process. Please do not call about the status of your job application, if you do not require accessibility assistance or an accommodation. Messages left for other purposes, such as following up on an application or non-disability related technical issues, will not receive a call back. Ready to drive with Continental? Take the first step and fill in the online application.