Inspector jobs at Valvoline

MECO is a world leader in the engineering and manufacturing of water purification solutions for industrial, pharmaceutical, oil and gas, military, and food and beverage enterprises. This legacy of leadership is the result of our commitment to the highest quality of products and services in everything we do. We are seeking a Receiving Inspector for our Hammond, LA warehouse. The Receiving Inspector is responsible for ensuring quality and safety at all times while performing duties which include de-crating incoming material, dispositioning material to and from warehouse locations, cycle counting, de-kitting production orders, completing stock transfer and UPS FEDX shipments along with the required packaging, preparing pumps and parts for shipment by boxing, palletizing or crating, assisting with inventory related assignments and general shop related duties, including clean up and building maintenance. Key Accountabilities/Responsibilities Operate sit-down and stand-up forklifts to pull, move, and stage materials for work orders across the warehouse, assembly, machine shop, and other designated areas. Report material shortages to the supervisor or stockroom coordinator. Maintain accurate counts for all materials pulled, stocked, or staged. Transport materials within and around the facility, including outdoor areas. Receive incoming shipments and verify quantities against packing slips. Stock parts in designated locations and ensure inventory accuracy to support production needs. Prepare pumps and parts for shipment by boxing, palletizing, or crating as required. Load and unload materials and equipment using the loading dock or outdoor delivery areas. Use SAP (Grundfos ERP system) to confirm production orders, initiate operations, and complete related transactions. Review orders for accuracy, investigate discrepancies, reconcile material shortages in SAP, and report issues to support continuous improvement. Support daily 5S activities and maintain department tools and equipment. Follow all inventory control procedures and company policies. Perform all tasks in compliance with applicable legislation, regulations, and company requirements; report any non-compliance concerns. Adhere to all health and safety policies, act responsibly to prevent injury, and report hazards or incidents immediately to a supervisor or EHS representative. Participate in ongoing EHS initiatives, identify improvement opportunities, and complete all required EHS training. Minimum Qualifications High School diploma or General Education Degree (GED) or a combination of training, education and experience preferred. Previous experience using SAP as well as warehouse experience, crane lift rigging, and forklift experience is preferred. 4+ years warehouse experience.

Senior Quality Assurance Inspector - CWI/NDT Specialist Job Code: Plant Operation FLSA Status: Non-Exempt Steward Machine Company Steward Machine, a multi-generational family-owned business, boasts over a century of successful operation. We leverage extensive lifting capacity and some of the world's largest CNC machinery within our 290,000 square feet of manufacturing space. We provide complete turnkey solutions, managing everything from detailing shop drawings to in-house fabrication, welding, stress relieving, machining, gear cutting, and assembly. Steward Machine Co. proudly holds AISC certification to the highest standard for fracture critical endorsement. Our operations are guided by 5 core principles: Relentless Work Ethic, a "Can Do Attitude", Excellence, Passion, and Adaptability. We consistently deliver equipment to the world's most demanding clients, ensuring projects are completed right the first time with our unwavering "can do" attitude. Our track record for on-time deliveries is impeccable. Primary Purpose of the Position This inspector will be pivotal in upholding Steward Machine Company's commitment to excellence, ensuring all products consistently meet stringent specifications. This role is critical for maintaining our reputation for quality, efficiency, and safety, directly contributing to the company's continued success. Essential Functions / Duties Conduct meticulous inspections of machines and fabricated weldments at assembly, inspection, or machining stations to ensure strict conformance to specifications. Verify the conformance of vendor- furnished parts and materials against detailed plans and specifications. Collaborate with production teams to ensure timely inspection functions at designated hold points, optimizing the shop flow of parts. Document comprehensive findings from Visual, Magnetic Particle, Dye Penetrant, and Ultrasonic Testing on official inspection reports. Interpret complex blueprints and engineering specifications to extract critical product information, including material surface, dimensional, and NDT requirements. Precisely measure dimensions such as length, height, diameter, and distance between reference points using advanced precision instruments. Accurately locate reference points on parts and measure intricate dimensions like angles, arcs, and radii. Generate detailed inspection reports and maintain comprehensive welding logs. Perform precise dimensional inspection of components and assemblies. Execute thorough inspections of first-run, in-process, and final fabricated parts and assemblies. Calibrate and test equipment to ensure optimal accuracy and performance. Conduct hardness testing of workpiece surfaces using specialized machinery. Prepare and meticulously maintain calibration records for welding machines and inspection gauges. Develop and maintain accurate Welder Continuity Logs. Role / Department / Location Specific Requirements Reports to the Plant Manager Position is based in Birmingham Alabama Job Requirements 900 hours of Ultrasonic Testing Hours- must provide documentation CWI license preferred, not a deal breaker if can provide proof of UT Knowledge, Skills, and Abilities Demonstrated expertise in Visual and NDT Inspections of fabricated weldments. Proven experience in heavy construction machining or related industrial sectors. Proactive self-starter with exceptional customer service acumen and a positive demeanor, fostering strong working relationships with management and colleagues. Possess excellent dexterity, physical strength, and sustained physical stamina. Strong technical proficiency and the ability to accurately interpret complex blueprints, technical documents, and manuals. Exceptional attention to detail, ensuring precision and accuracy in all tasks. Superior verbal and written communication skills for effective collaboration and reporting. Education requirements or equivalent experience: High school diploma or GED, or equivalent vocational training/experience. Possession of an AWS Certified Welding Inspector (CWI) certification. Minimum of one year of Ultrasonic Testing experience, adhering to AWS D1.1 and AWS D1.5 Codes. Completion of one year of technical school or five years of demonstrated experience in heavy steel fabrication. Proficiency in reading, writing, and fundamental mathematical concepts (fractions, decimals, and trigonometry). Demonstrated ability to independently solve complex technical problems with minimal supervision. Not all aspects of the job are covered by the description - may require other duties as assigned. Job may change over time in accordance with business needs. does not guarantee employment. Working Conditions The work environment involves occasional exposure to dynamic industrial elements, including moving mechanical parts, elevated work areas, fumes or airborne particles, and varying outdoor weather conditions. This may encompass extreme temperatures, humidity, and the presence of chemicals, with a potential for electrical shock and vibration. The ambient noise level is typically moderate. Physical Requirements The role regularly requires physical engagement, including standing, walking, sitting, and utilizing hands for handling and feeling, along with reaching, talking, and hearing. Occasional demands include climbing, balancing, stooping, kneeling, bending, crouching, crawling, and the ability to detect odors. The employee must be capable of occasionally lifting and/or moving up to 50 pounds. Essential visual abilities encompass close vision, distance vision, color vision, peripheral vision, depthperception, and the capacity to adjust focus. Affirmative Action /EEO Statement Steward Machine Company is a Federal VEVRAA contractor, and an Equal Opportunity Employer committed to providing equal employment opportunity in all employment practices. Steward Machine Company will not discriminate against any applicant for employment because of their race, color, religion, sex, national origin, age, sexual orientation, disability, veteran or service member status, marital status, citizenship status (In IL - sex, including same sex, ancestry, order of protection status, physical or mental disability, military status, pregnancy, unfavorable discharge status, genetic information), (In IA - gender identity), (In CA - gender identity or expression, and genetic information) or any other category protected by federal, state or local law. Limitation and Disclaimer The above job description is meant to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties and skills required for the position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor in compliance with Federal and State Laws. Requirements are representative of minimum levels of knowledge, skills and/or abilities. To perform this job successfully, the employee must possess the abilities or aptitudes to perform each duty proficiently. Steward Machine Company is an EEO/AA employer M/F/D/V. It is the Company's policy to provide equal opportunity for all qualified persons and to prohibit discrimination on the basis of race, color, sex, national origin, religion, age, disability, marital status, sexual orientation, gender identity, citizenship status, or any other legally protected status. We maintain a drug-free workplace and reserve the right to perform substance abuse testing as needed.

About Us Haskel, an Ingersoll Rand Company, is a High-Pressure Technology Solutions. We specialize in Air-Driven Liquid Pumps, Air-Driven Refrigerant Pumps, Hydraulic Drive Compressors, Gas Booster Compressor System, BuTech High-Pressure Valves and Hydrogen Valves Fitting and Tubing. Job Summary This role is responsible for ensuring the quality control cell is actively engaged to meet daily customer demand and production schedule. Performs receiving, in-process and/or final inspection of hardware. Conducts complex inspections as defined by quality/inspection plans or per directions of quality management/engineering. Uses a complete range of precision tools and instruments requiring advanced inspection skills and techniques. Ensures that all gauges/tools used are properly calibrated. Identify accurate and efficient means of inspection techniques. Works with general/minimal supervision. Train and provide directions to the Quality Control team under the supervision of the Quality Control Manager. Responsibilities The Quality Team Lead will inspect products by using a variety of inspection tools/devices, work instructions and computer to perform a series of inspections to correctly verify incoming parts, in-process and completed assemblies. Verify supplier material certifications, including special processes, and ensure compliance with quality/PO requirements. Creates supporting documentation (data books, certificates of conformance, etc…) Support disposition of discrepant materials (MRB) in accordance with appropriate quality procedures and maintain low inventory of on-hold parts. Verifies first articles from suppliers and internal departments. Prepares and processes records and reports to document supplier/operations performance. Qualify supplier components and/or systems for assuring conforming product. Adheres to calibrations system of inspection, measuring and test equipment. Applies Statistical Quality Control techniques as directed. Assist with interpretation of drawings, specifications and quality requirements. Properly process goods for outside processing, investigates and evaluates component parts returned and nonconforming product. The Quality Team Lead provides effective training to the quality control cell and ensures safety and quality standards are always maintained. Work with supervisor to manage and prioritize staffing assignments to ensure customer demand and the production schedule are met. Use basic problem-solving skills to ensure stable operation of the quality control cell. Report problems or concerns with quality, processes, equipment, materials and labor to Quality management. Work closely with support staff such as Purchasing/Planning, Manufacturing Engineering, Production Supervisor, Materials/Warehouse to resolve issues. Observe, maintain, coordinate and complete standard work. Update production metrics and facilitate regular team communication. Identify and support continuous improvement efforts with Quality management. Sustain and drive lean manufacturing and 5S activities. Follow documented policies and procedures as designated by the company's Quality System. Basic Qualifications Ability to read and interpret documents such as safety rules, engineering drawings, operating and maintenance instructions, Material Standards, Quality Plans, Control Plans and Inspection Test Plans. Experience with Microsoft Office (Word, Excel, Outlook). Ability to communicate effectively through oral and written communications. Ability to analyze and solve problems. Ability to work with others collaboratively. Strong organizational skills. Preferred Experience leading teams or projects strongly desired. Quality Control experience. Lean manufacturing and continual process improvement experience. Educational Requirements High School diploma or equivalent Five years + of related experience and a minimum of two leading teams. LIP Eligible Role This position is eligible for the LIP (Local Incentive Plan) of up to 4%. The pay range takes into account a wide range of factors that are considered in making compensation decisions including, but not limited to, skills; experience and training; licensure and certifications; and other business and organizational needs. The disclosed pay range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At Ingersoll Rand, it is not typical for an individual to be hired at or near the top of the pay range for their role and compensation decisions are dependent on the facts and circumstances of each case. At Ingersoll Rand, we think and act like owners - of our business, our communities, our planet, and our health too. The Ingersoll Rand benefits program provides you with the tools and resources to take accountability for your health so that we can continue to help make life better. Benefits of employment and include; Medical and Prescription drug plans Wellness and Chronic disease management programs Dental, vision, life/AD&D insurance Short- and Long-term disability Health Savings Account Flexible Spending Account Parental Leave Employee Assistance Program Discount Program Employee Stock Grant 401k plan with a company match 3 weeks of paid vacation and 11 paid holidays throughout the calendar year Voluntary benefits include legal, accident, and critical illness protection

We are looking for a detailed oriented Warehouse Quality Inspector to join our team in Point of Rocks, MD. 1st Shift Schedule Monday - Friday 6:00AM-2:30PM (8 Hour schedule) And Monday - Thursday 6:00AM-3:30PM / Friday 6:00AM-2:30PM / Saturday 6:00AM-12:00PM (9 Hour schedule) Plus Over Time as needed Must be able to work all shift schedules JOB SUMMARY: Responsible for maintaining inventory and incoming inspection of raw materials and work in progress, including verification of mill certs. Documents any discrepancies and assures proper disposition. ESSENTIAL FUNCTIONS: Inspects incoming product for quality assurance standards using current methodology and basic measurement techniques. Communicates effectively throughout the day with Quality, Operations and Purchasing. Documents nonconformances (red tags) of incoming products as required. Problem solving of internal process related issues and develops corrective actions. Advise on changes and implementation and provides training, tools and techniques to enable others to achieve quality. Back up other Quality Team Members as needed. Performs various administrative activities as assigned. Performs other job duties as assigned by supervisor. Cross trained with other department Quality Inspectors. Location 4010 Clay Street, Point of Rocks, Maryland 21777, United States Anticipated Pay Range $55,000 - $73,000 / Year Pay Range Disclaimer Please note that the compensation details listed reflect salary only, and do not include bonus or profit-sharing. Our salary ranges are determined by role, level, and location. The range displayed on the job posting reflects the minimum and maximum target for new hire salaries for this position. The range may vary by location. Within the range, individual pay is determined by additional factors, including job related skills, experience, and relevant education or training. Benefits In addition to base salary, this role will be eligible for participation in Canam Steel Corp (CSC)'s benefits programs, including medical, dental, vision, (plus additional voluntary benefits) and 401K (with employer match). Career Requirements QUALIFICATIONS: High School Diploma or equivalent. Read measuring tape, caliper, micrometer. Add and subtract simple fractions Read and interpret work orders and job specification sheets. Ability to work without direct supervision in a team environment. Ability to attain crane and forklift certifications. Ability to obtain welding certification. Ability to lift up to 30 lbs. Maintain good attendance (less than 8 attendance points to be eligible to apply). Able to read and speak English (Bi-lingual preferred). Proficient computer skills. Proficient in Excel, Word, Outlook, Teams. PHYSICAL DEMANDS: Regularly required to stand; use hands and fingers, handle, or feel objects, tools, or controls; and reach with hands and arms. Frequently required to balance; stoop, kneel, crouch, or crawl; and talk or hear. Occasionally lift and/or move up to 60 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: In general, employee is exposed to a structural steel fabrication environment with excessive noise levels. Occasional exposure to vibration. Frequently works near moving mechanical parts. Frequently exposed to fumes or airborne particles. Hot and cold conditions consistent with outside weather conditions. DISCLAIMER: Employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodations will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. CSC retains the right to change or assign other duties to this position. Shift 1st Shift; Monday - Friday 6:00AM-2:30PM (8 Hr) and Monday - Thursday 6:00AM-3:30PM / Friday 6:00AM-2:30PM / Saturday 6:00AM-12:00PM (9Hr) + OT as needed

About Us: BW Design Group is a fully integrated architecture, engineering, construction, system integration, and consulting firm committed to helping our clients realize their most critical goals from Strategy to Commercialization. As the only firm born from a manufacturing technology company to become an independent and fully integrated firm, we combine deep domain expertise in the manufacturing environment with an approach that is built to serve the dynamic needs of our clients. Rooted in our distinct culture of Truly Human Leadership, we cultivate the leaders who will define tomorrow and partner with our clients in the food & beverage, life sciences, industrial, and advanced technology industries to build the future of manufacturing and technology. Barry-Wehmiller is a diversified global supplier of engineering consulting and manufacturing technology for the packaging, corrugating, sheeting and paper-converting industries. By blending people-centric leadership with disciplined operational strategies and purpose-driven growth, Barry-Wehmiller has become a $3 billion organization with nearly 12,000 team members united by a common belief: to use the power of business to build a better world. Job Description: Who We Are As an independent division within Barry-Wehmiller Design Group, Inc., ControlTech Automation (CTA) is a control panel integrator and fabricator for process, packaging, utility, and other industries. CTA is based in St. Louis and specializes in control panels for systems integrators and production facilities located throughout the United States. CTA provides control solutions for single pieces of equipment, entire processes, and complete plants. CTA has engineering design capabilities and builds panels from customer-supplied design packages. What You'll Do As our Final Inspection Lead, you'll lead a skilled inspection team to ensure every panel leaving our floor meets the highest standards for safety, quality, and performance. You'll drive process improvements, support training, and collaborate across departments to keep projects moving smoothly and our customers satisfied. Key Responsibilities Lead daily final inspection operations, ensuring all products meet specs and safety standards. Oversee inspection procedures and continuously look for ways to improve accuracy and efficiency. Review assemblies for function, completeness, and compliance before shipment. Document results, punch lists, and defects. Partner with manufacturing to resolve issues quickly. Develop, implement, and uphold quality control standards and best practices. Track and analyze quality data to spot trends and drive improvements. Coordinate with engineering, production, and customers for smooth final approval. Provide training, mentorship, and support to the inspection team. Ensure inspection tools are calibrated and maintained properly. Serve as the key communicator between inspection and other departments. What You'll Bring High school diploma or GED required; associate degree in electrical technology or technical certifications/coursework in electrical systems a strong plus 5+ years of hands-on electrical work experience (e.g., as an electrician, wireman, or electrical technician), including 2+ years with final inspection, testing, or QC responsibilities Solid understanding of electrical schematics, wiring standards, control panels, and UL/NEC codes Familiarity with inspection tools, documentation processes, and quality systems related to electrical assemblies Excellent attention to detail, troubleshooting ability, and strong communication skills Committed to safety, team-oriented leadership, and continuous improvement in a production environment Valid driver's license; able to lift up to 50 lbs Why CTA? We offer competitive pay, full benefits, and real opportunities for growth in a people-centered environment. If you're passionate about quality, safety, and helping teams do their best work, we'd love to hear from you. At Barry-Wehmiller we recognize that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please still consider applying. We know that our differences often can bring about innovation, excellence and meaningful work-therefore, people from all backgrounds are encouraged to apply to our positions. Please let us know if you require reasonable accommodations during the interview process. Barry-Wehmiller is an equal opportunity employer. M/F/D/V This organization uses E-Verify. Applicants may be subject to pre-employment screening which may include drug screening, reference checks, employment verifications, background screening and/or skills assessments. Company: Design Group

HMT is the global leader in aboveground storage tank solutions. HMT brings a distinct level of innovation and service to the tank industry through a unique approach of partnering with customers to optimize tank operations. Knowing that every customer's need is different, we use our decades of experience to customize solutions that help tank operations become more efficient, more productive, and more profitable. We are seeking an experienced NACE Inspector Level III to perform comprehensive visual inspections and Holiday Tests on the vulcanized rubber liners of three Ecodyn tanks located at Valero Port Arthur, Texas. The NACE Inspector will be responsible for documenting each inspection, identifying any rejected indications, and ensuring proper corrective actions are followed during the repair process. The inspector will also be required to perform in-process inspections and submit daily reports during the repair process. Key Responsibilities: Visual Inspections: Conduct thorough visual inspections of the vulcanized rubber liner inside each of the three Ecodyn tanks to ensure they meet specified standards. Holiday Testing: Perform Holiday Tests on the rubber linings of each tank to identify any coating defects or discontinuities. Reporting: Document findings in clear and detailed reports for each tank, including any areas of concern or defects identified during the inspection. Rejected Indications: If any rejected indications or defects are found, follow the approved repair process and ensure all necessary repairs are completed. In-Process Inspections: Conduct in-process inspections during the repair phase to ensure the quality and compliance of repairs. Daily Reports: Submit daily reports during the repair process to document progress, any issues, and resolutions. Compliance: Ensure all inspection activities comply with applicable standards, including NACE and industry-specific guidelines. Collaboration: Work closely with the maintenance and repair teams to ensure timely and effective repairs. Required Qualifications: NACE Level III Certification (or equivalent) in Coating Inspection. Proven experience performing visual inspections and Holiday Testing, particularly on rubber linings. Strong understanding of coating inspection standards and procedures. Ability to work independently and manage inspection tasks for multiple tanks. Familiarity with reporting requirements and documentation of inspection and repair activities. Excellent attention to detail and ability to identify and report defects or non-compliance issues. Strong communication skills for reporting findings to management and working with the repair teams. Preferred Qualifications: Experience in the oil and gas or chemical industries, specifically with tank linings or coatings. Previous experience performing inspections on tanks or similar equipment. Physical Requirements: Ability to work in various weather conditions, including outdoor environments. Ability to access confined spaces and elevated areas when necessary. Able to bend and lift up to 20 lbs. Working Hours: Full-time, with daily reporting during inspection and repair phases. Flexibility in hours may be required to accommodate repair schedules. HMT is an Equal Employment Opportunity Employer. We will not tolerate discrimination because of race, color, religion, sex, age, national origin, military or veteran status, mental or physical disability, genetic information, gender, gender identity or expression, sexual expression, or any other unlawful reason. All qualified applicants are encouraged to submit applications for employment. Employment with HMT is At-Will.

We are a fusion power company based in Everett, WA, with the mission to build the world's first fusion power plant, enabling a future with unlimited clean electricity. Our vision is a world with clean, reliable, and affordable energy for everyone. Since Helion's founding in 2013, we have raised over $1 billion from long-time investors such as Sam Altman, Mithril, and Capricorn Investment Group as well as new investors SoftBank and Lightspeed to propel us forward. Our last prototype, Trenta, completed 10,000 high-power pulses and reached plasma temperatures of 100 million degrees Celsius (9 keV). We are now operating Polaris, our next prototype on the path to the world's first fusion power plant. This is a pivotal time to join Helion. You will tackle real-world challenges with a team that prizes urgency, rigor, ownership, and a commitment to delivering hard truths - values essential to achieving what no one has before. Together, we will change the future of energy, because the world can't wait. What You Will Be Doing: The Inspector ensures that they ensure the quality and compliance of both purchased and internally manufactured components. You will perform inspections, evaluates nonconformances, documents findings, and support corrective and preventive action efforts. The Inspector collaborates with Production, Engineering, Supply Chain, and Machining teams to maintain strong quality expectations that ensure efficient operations and the reliable performance of our fusion generators. As an Inspector, you will report directly to one of our Production Supervisors at our Everett, WA location. You Will: * Inspect incoming materials, components, and finished goods for compliance with quality standards * Use inspection tools (calipers, gauges, measuring devices) to verify dimensional and visual requirements * Maintain accurate inspection records and document all nonconformances * Prepare inspection reports and ensure documentation of results * Work with Production, Engineering, Sourcing, and suppliers to address quality issues * Coordinate with Receiving to resolve quality concerns promptly * Support improvements to inspection processes and quality procedures * Identify quality issues and recommend corrective and preventive actions * Collaborate with teams to ensure resolution of quality problems * Stay informed on best practices and trends in quality control Required Skills: * High school diploma or equivalent; additional technical or quality-related certifications * 1.5+ years' experience in quality or inspection roles * Read and interpret technical drawings and specifications for mechanical and electromechanical parts * Proven experience in a quality control or inspection role in a manufacturing or production environment * Consistently identifies errors and evaluates data to support decisions * Familiarity with quality standards, regulations, and inspection techniques * Clearly convey information and expectations to team members and the ability to collaborate across teams * Proficiency in using inspection tools and equipment * Knowledge of basic computer applications and proficient in entering and maintaining quality records * Ability to lift and move objects up to 50 pounds * Comfortable standing for extended periods during inspections * Ability to compare products against visual standards, including color and detail requirements. #LI-Onsite, #LI-CW1 Total Compensation and Benefits Helion's compensation package includes a competitively benchmarked base salary, meaningful equity grants, and comprehensive benefits. Final compensation is determined through a holistic evaluation of your experience, qualifications, and our commitment to internal equity - ensuring fairness and transparency across our teams. We are committed to fostering a fair and equitable environment in every aspect of our operations, including compensation. This is an exempt salaried role. Annual Base Pay $29-$39 USD Benefits Our total compensation package includes benefits, including but not limited to: * Medical, Dental, and Vision plans for employees and their families * 31 Days of PTO (21 vacation days and 10 sick days) * 10 Paid holidays, plus company-wide winter break * Up to 5% employer 401(k) match * Short term disability, long term disability, and life insurance * Paid parental leave and support (up to 16 weeks) * Annual wellness stipend Helion is an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need assistance or an accommodation during the interview process, please let us know.

Job Title: Distribution Inspector 3Location: Rio Grande Valley Service Area/El Paso Service AreaKey Responsibilities:Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping. Spearhead capital rebuild and relocation projects, overseeing every aspect from planning to execution, ensuring seamless operations and compliance with industry standards. Utilize techniques and technologies to identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities. Ensure all inspections meet or exceed industry regulations and standards. Foster strong relationships with clients and internal teams, delivering clear, concise, and actionable insights from inspections, fostering a culture of collaboration and excellence. Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications:5-6 years of hands-on experience in pipeline inspection, with a focus on capital rebuilds, relocations, and leak detection. API 1169 CertificationProven expertise in overseeing large-scale projects, from start to finish. Exceptional problem-solving skills and attention to detail, with a focus on precision and accuracy in all aspects of inspection and reporting. Strong communication skills with the ability to work effectively in a team environment. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Title: Distribution Inspector Level 3Location: El Paso, TXDuration: Long TermDescription:· Must be able to monitor work performed by contractors hired by Company on gas pipeline and service installations, replacements, and relocations within Company's service area. · Work shall be performed in accordance with Company standards and 49 CFR 192· Oversee transmission projects, ensuring the integrity, safety, and compliance of pipelines. Qualifications:· Minimum of 6 years of hands-on experience in pipeline inspection, with a specialized focus on poly fusion projects. · Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, TVC, and ONE MAP. · CPWI· API 1169· Identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities. · Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Title: Distribution Inspector 3Location: Austin, TXKey Responsibilities:Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping. Spearhead capital rebuild and relocation projects, overseeing every aspect from planning to execution, ensuring seamless operations and compliance with industry standards. Utilize techniques and technologies to identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities. Ensure all inspections meet or exceed industry regulations and standards. Foster strong relationships with clients and internal teams, delivering clear, concise, and actionable insights from inspections, fostering a culture of collaboration and excellence. Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications:5-6 years of hands-on experience in pipeline inspection, with a focus on capital rebuilds, relocations, and leak detection. API 1169 CertificationProven expertise in overseeing large-scale projects, from start to finish. Exceptional problem-solving skills and attention to detail, with a focus on precision and accuracy in all aspects of inspection and reporting. Strong communication skills with the ability to work effectively in a team environment. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Title: Natural Gas Distribution Inspector Level 2Location: South East, TXKey Responsibilities:Conduct comprehensive inspections of pipelines, focusing on line extensions and rebuild services, to guarantee compliance with industry standards and regulations.Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping.Collaborate closely with engineering teams to develop effective inspection strategies and contribute to the planning of line extension projects and rebuild services.Provide technical expertise to support decision-making processes related to pipeline maintenance, repair, and replacement.Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications:Minimum of 2-4 years of hands-on experience in pipeline inspection, with a focus on line extensions and rebuild services.In-depth knowledge of pipeline construction, maintenance, and repair processes, particularly related to line extensions and rebuild projects.Familiarity with industry-specific software and tools.Strong analytical skills and attention to detail, with the ability to identify and assess potential issues in pipelines.Excellent communication skills with the ability to work within a team. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

C & L Inspection was built on a mission to be the most trusted US Services Company delivering top-notch performance with uncompromising integrity. This way of thinking has set us above the competition. We are looking for knowledgeable, safety minded people to join our team as we grow. Job Title: Distribution Inspector 3Location: Tulsa, OKKey Responsibilities:Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping.Spearhead capital rebuild and relocation projects, overseeing every aspect from planning to execution, ensuring seamless operations and compliance with industry standards.Utilize techniques and technologies to identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities.Ensure all inspections meet or exceed industry regulations and standards.Foster strong relationships with clients and internal teams, delivering clear, concise, and actionable insights from inspections, fostering a culture of collaboration and excellence.Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications:5-6 years of hands-on experience in pipeline inspection, with a focus on capital rebuilds, relocations, and leak detection.API 1169 CertificationProven expertise in overseeing large-scale projects, from start to finish. Exceptional problem-solving skills and attention to detail, with a focus on precision and accuracy in all aspects of inspection and reporting.Strong communication skills with the ability to work effectively in a team environment. C & L Inspection offers a full slate of Inspection, Construction Management and Engineering personnel to the Petroleum, Natural Gas and Telecom Industries. We surpass others in the industry by providing the newest technology, training and support that is unequaled. Working together with our inspectors and clients, our team strives to set a new bar for the Pipeline & Utilities Inspection industry.

Job DescriptionC & L Inspection was built on a mission to be the most trusted US Services Company delivering top-notch performance with uncompromising integrity. This way of thinking has set us above the competition. We are looking for knowledgeable, safety minded people to join our team as we grow. Job Title: Distribution Inspector 3Location: Tulsa, OKKey Responsibilities:Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping.Spearhead capital rebuild and relocation projects, overseeing every aspect from planning to execution, ensuring seamless operations and compliance with industry standards.Utilize techniques and technologies to identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities.Ensure all inspections meet or exceed industry regulations and standards.Foster strong relationships with clients and internal teams, delivering clear, concise, and actionable insights from inspections, fostering a culture of collaboration and excellence.Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications:5-6 years of hands-on experience in pipeline inspection, with a focus on capital rebuilds, relocations, and leak detection.API 1169 CertificationProven expertise in overseeing large-scale projects, from start to finish. Exceptional problem-solving skills and attention to detail, with a focus on precision and accuracy in all aspects of inspection and reporting.Strong communication skills with the ability to work effectively in a team environment. C & L Inspection offers a full slate of Inspection, Construction Management and Engineering personnel to the Petroleum, Natural Gas and Telecom Industries. We surpass others in the industry by providing the newest technology, training and support that is unequaled. Working together with our inspectors and clients, our team strives to set a new bar for the Pipeline & Utilities Inspection industry. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

The API Inspector is responsible for performing inspections on pressure vessels, piping, tanks, and other static mechanical equipment in accordance with applicable API codes (e.g., API 510, API 570, API 653). The role ensures the mechanical integrity and safety compliance of assets during operations, turnarounds, and outages. Key Responsibilities: Conduct internal and external inspections of equipment in accordance with API 510, 570, and/or 653 standards. Evaluate the condition and integrity of pressure vessels, piping systems, and aboveground storage tanks. Prepare detailed inspection reports and document findings using digital reporting tools or databases. Interpret and apply applicable codes, standards, and client specifications. Coordinate with engineering, maintenance, and operations teams to prioritize inspection tasks. Recommend repair or replacement strategies based on inspection findings. Assist with developing inspection plans and schedules for routine and turnaround inspections. Maintain inspection certifications and stay current with updates to API codes and best practices.

Job Description Reads and interprets work instructions and blueprints to determine dimensions and tolerances. Interprets Geometric Dimensioning & Tolerance. Measures, inspects, tests and verifies machined, welded and finished parts for conformance to specifications. Manually operates CMM's, height gages, comparator, etc. Provides support for quality projects dictated by the Quality Leadership. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES Supports First Piece, In-Process, Final, and F.A.I. Inspections. Reads blueprints or specifications to determine dimensions and tolerances. Verifies specified dimensions of product or raw material using verniers, micrometers, intramics, CMM, height gages, comparator, scales and or/other tools. Measures angular dimensions, radii, height, thickness, location, thread lead, and other specifications. Computes angles, radii, and other unspecified dimensions of work piece by using sine bars. Measures surface finish of parts. Inspects first run parts and assemblies. Examines material or product for surface defects such as cracks, pits, and incomplete welds. Tests units for fit of moving parts and mechanical functioning. Tests parts for hardness. Compares product with parts list or sample model to ensure completion of assembly. Rejects defective parts, and marks type of defect on part, container of parts, or inspection tag. Writes reports regarding inspection and testing results. Manually operates and sets up Mitutoyo CMM's and FARO Arm. Supports inspection duties, quality objectives, and the Quality Management System. Studies blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements. Verifies conformance of finished work piece to specifications. Assists in other areas in support of product conformity. Facilitates effective communications and working relationships (including answering department phone). Demonstrates responsibility and accountability for creating a professional, safe, and clean environment evidenced by: being at work on time to perform assigned duties, following the policies of Granite State Manufacturing, always wearing safety glasses in designated areas, maintaining a neat and orderly work area, and following safety practices to prevent errors. Demonstrates commitment to teamwork by establishing effective relationships and networks with both managers/directors and workers, and collaborating with them to accomplish shared purposes and goals. Abides by GSM Code of Ethics and Business Conduct standards and strictly observes all U.S. and foreign laws and regulations. AAP/EEO STATEMENT GSM does not discriminate on the basis of race, color, religion, sex, gender, gender identity or expression, national origin, citizenship, veteran status, age, physical or mental disability, genetic information, marital status, sexual orientation, or any other consideration made unlawful by applicable federal, state, or local laws in its programs, activities, or employment. SEARCH / RECRUITING AGENCIES Granite State Manufacturing (GSM) does not accept non-solicited resumes or candidate submittals from search/recruiting agencies unless GSM requests such resumes, and the search/recruiting agency is on GSM's approved list of such agencies. Unsolicited resumes or candidate information submitted to GSM by search/recruiting agencies shall become the property of GSM and if the candidate is subsequently hired by GSM, GSM shall not owe any fee to the submitting agency. Requirements Two-year certification from college or technical school; or 5 years related experience and/or training; or equivalent combination of education and experience. Ability to manually operate and set up Mitutoyo CMM's. Must know how to interpret Geometric Dimensioning & Tolerance. Must have the ability to work as a team player in a group or team environment and must be able to work independently without supervision. Must be flexible enough to work in all areas of operation per the direction of the Leadership. A personal and professional background sufficient to secure a Government Security Clearance is required. Advanced knowledge of inspection, plating & coating processes and raw materials a plus. Benefits Granite State Manufacturing offers a comprehensive benefits package to all GSM employees. Health & Wellness Programs Health Insurances (Medical, Dental, & Vision) Flexible Spending Accounts (FSA) Basic & Optional Life Insurance Short & Long Term Disability Employee Assistance Program Voluntary Worksite Benefits 401k Retirement Plan Paid Leave Tuition Reimbursement Workers Compensation …and much more.

Reads and interprets work instructions and blueprints to determine dimensions and tolerances. Interprets Geometric Dimensioning & Tolerance. Measures, inspects, tests and verifies machined, welded and finished parts for conformance to specifications. Manually operates CMM's, height gages, comparator, etc. Provides support for quality projects dictated by the Quality Leadership. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES Supports First Piece, In-Process, Final, and F.A.I. Inspections. Reads blueprints or specifications to determine dimensions and tolerances. Verifies specified dimensions of product or raw material using verniers, micrometers, intramics, CMM, height gages, comparator, scales and or/other tools. Measures angular dimensions, radii, height, thickness, location, thread lead, and other specifications. Computes angles, radii, and other unspecified dimensions of work piece by using sine bars. Measures surface finish of parts. Inspects first run parts and assemblies. Examines material or product for surface defects such as cracks, pits, and incomplete welds. Tests units for fit of moving parts and mechanical functioning. Tests parts for hardness. Compares product with parts list or sample model to ensure completion of assembly. Rejects defective parts, and marks type of defect on part, container of parts, or inspection tag. Writes reports regarding inspection and testing results. Manually operates and sets up Mitutoyo CMM's and FARO Arm. Supports inspection duties, quality objectives, and the Quality Management System. Studies blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements. Verifies conformance of finished work piece to specifications. Assists in other areas in support of product conformity. Facilitates effective communications and working relationships (including answering department phone). Demonstrates responsibility and accountability for creating a professional, safe, and clean environment evidenced by: being at work on time to perform assigned duties, following the policies of Granite State Manufacturing, always wearing safety glasses in designated areas, maintaining a neat and orderly work area, and following safety practices to prevent errors. Demonstrates commitment to teamwork by establishing effective relationships and networks with both managers/directors and workers, and collaborating with them to accomplish shared purposes and goals. Abides by GSM Code of Ethics and Business Conduct standards and strictly observes all U.S. and foreign laws and regulations. Requirements Two-year certification from college or technical school; or 5 years related experience and/or training; or equivalent combination of education and experience. Ability to manually operate and set up Mitutoyo CMM's. Must know how to interpret Geometric Dimensioning & Tolerance. Must have the ability to work as a team player in a group or team environment and must be able to work independently without supervision. Must be flexible enough to work in all areas of operation per the direction of the Leadership. A personal and professional background sufficient to secure a Government Security Clearance is required. Advanced knowledge of inspection, plating & coating processes and raw materials a plus. AAP/EEO STATEMENT Granite State Manufacturing (GSM) is an affirmative action and equal opportunity employer. GSM does not discriminate on the basis of race, color, religion, sex, gender, gender identity or expression, national origin, citizenship, veteran status, age, physical or mental disability, genetic information, marital status, sexual orientation, or any other consideration made unlawful by applicable federal, state, or local laws in its programs, activities, or emp Benefits Granite State Manufacturing offers a comprehensive benefits package to all GSM employees. Health & Wellness Programs Health Insurances (Medical, Dental, & Vision) Flexible Spending Accounts (FSA) Basic & Optional Life Insurance Short & Long Term Disability Employee Assistance Program Voluntary Worksite Benefits 401k Retirement Plan Paid Leave Tuition Reimbursement Workers Compensation …and much more.

The inspector assures control of the product while being produced on the machines as well as final inspection prior to shipment •The employee must have the ability to perform inspection functions such as visual inspection to detect cosmetic defects and color differentiation of products •Attendance and punctuality are essential functions of this position. Any unscheduled absence or tardy will have a negative impact on our ability to meet our production objectives •Physical aspects of the job are defined on the Physical Demands Analysis located in HR •The ability to carry out oral and written instructions along with the ability to adapt to different situations. •Must have the ability to acquire a thorough knowledge of all testing and measuring devices. •Must be able to sit for extended periods, walk extensively, and produce a high quality product.

The inspector assures control of the product while being produced on the machines as well as final inspection prior to shipment

Overview: The Label Inspector is a great entry level position to learn about the print industry in a warehouse setting! You will be working on a Inspection machine inspect, cut, and quality check printed labels based on work order specifications. No experience with Inspection or machinery? No problem! We are willing to train the right candidates! Shifts Available: 1st shift: 4 weekdays starting at 5:30am-4:00pm; 6:00am-4:30am or 6:30am-5:00pm. Pay: $14.00-$15.00/hour to start. Benefits: Medical Dental Vision Short-Term & Long Term Disability Life Insurance Holiday Paid Time Off Paid Time Off 401(k) with Company Match What you'll do: Effectively preform inspection operations - by converting printed product into finished goods following work orders. Ensuring the inspection machine assigned is operation efficiently and producing according to quality standards. Set up printed product into inspection machine to cut and rewind counts according to work orders. Inspect and clean equipment on a regular basis and report any needs of maintenance/repairs. Other duties as assigned. Desired Traits/Requirements: Detailed-Oriented and capable of following standard work instructions. Working knowledge of Microsoft Office applications. Ability to communicate and work with co-workers effectively. Physical Demands: While performing the responsibilities of the job, the employee is required to talk and hear. The employee is often required to sit and use their hands and fingers, to handle or feel. The employee is occasionally required to stand, walk, reach with arms and hands, climb or balance, and to stoop, kneel, crouch, or crawl. Vision abilities required to perform this job include close vision. The employee may be required to lift up to 45 lbs. Reasonable accommodations to these requirements can be made to applicants with qualified disabilities. Equal Employment Opportunity: At BayTech Label, a subsidiary of Online Labels Group, we don't just accept difference - we celebrate it, support it, and thrive on it to benefit our employees, our products, and our community. Online Labels Group is proud to be an equal opportunity workplace for all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics.