Vehicle inspector part time jobs - 11 jobs

This is a Part-Time Lane Inspector Position. Opus is a world-leading vehicle inspection and intelligent vehicle support company that has been contributing to a safer and cleaner world since the company was founded in 1990. We take pride in helping make our world a safer and cleaner place. Duties and Responsibilities: Lane Inspector - Vehicle Emissions testing. You will play an important role in limiting the production of Emissions by identifying the polluting vehicles. As a lane inspector, YOU will be responsible for the following: * Perform emission inspection functions following established procedures, and enter and verify vehicle information with computer data. * Operate vehicles during the emissions system test and use exhaust analysis equipment. * Direct motorists in and out of the station, provide test results, instruct customers on next steps in the inspection process, and collect inspection fees. * Other job duties as assigned. No experience required; we will train you! Requirements: * Must be 18 years of age. * Valid and unrestricted driver's license. * Physically able to stand, bend, stoop, kneel, and balance unassisted for extended periods of time. * Physically able to lift, push, and pull up to 20 lbs on an occasional basis. * Basic computer skills. * Saturday availability required - (State & Program Specific) * Part-time hours requirement is between 20 - 30 hours a week. - (State & Program Specific) Qualifications: * Team player. * Excellent customer service skills. * Ability to work efficiently and multitask in a fast-paced, busy shop environment with a smile and positive attitude. * Work in an environment that includes vehicle exhaust fumes, noise, and heat. * Work in all weather conditions. * Work safely around operating motor vehicles. All offers of employment are contingent upon completing and meeting the criteria of a background check, drug screening, and I-9 verification.

Job Description Logistical Data Services delivers a new, technology driven option for our industry. Our inspection and related platforms are customized, created for the needs of our individual customers. We provide software solutions including new vehicle inspections, claims processing, damage in-transit and major damage reporting, inventory, and terminal management services for Railroads, OEMs, Marine, and Trucking customers. Candidates must be 18 years of age or older, be able to pass a background check, high school diploma or equivalent, and reliable transportation. A flexible schedule is preferred. Training will be provided. Responsibilities: - Inspect product for defects, damages, or inconsistencies - Conduct visual inspections to ensure adherence to quality standards - Use various measuring tools and equipment to perform accurate measurements - Record inspection results via handheld device - Follow safety protocols and maintain a clean and organized work area Qualifications: - Strong attention to detail and ability to identify defects or irregularities - Previous experience in a similar role is not required, but would be preferred - Excellent communication skills and ability to work well within a team If you are a motivated individual with a keen eye for detail, we encourage you to apply for this position. Join our team and contribute to our commitment to delivering high-quality service. We are looking for 2nd shift part time automotive inspector, days of the week may be flexible 5:00pm - 2:00am Hourly Pay Range: $15 to $16.50

Industry-leading 25% Night Shift Differential YOUR SCHEDULE, YOUR CHOICE, YOUR PREMIUM PAY! Two Shifts Days: 10-hour shifts starting between 5 & 6 am Nights start at 5 pm: Your Schedule, Your Choice, Your Premium Pay. M-F 8 hrs. or 10 hrs. M-TH 10 hrs. or 12 hrs. Retirees- work a part-time schedule on days or nights and receive a benefits package. FUNCTION: Performs NDT inspections (Penetrant, Magnetic Particle, X-Ray, Ultrasonic or Visual Inspections) as required and as personal certifications apply. Must have achieved national recognition as Level I, II or III by national accreditation. Note: A Level I is training and gaining work hours for certification. A Level II Inspector has one to three certifications of the five disciplines. A Level III Inspector has four or five certifications of the five disciplines. KEY RESULTS AREAS: Perform NDT tests and compare to the related specs for acceptability. Documentation is constantly and effectively monitored for accuracy and completeness. Respond rapidly to the needs of operators, teams and management in order to meet production and customer needs. Identify and implement ways to improve and eliminate waste, especially in the improvement of Quality efficiency. Watch for manufacturing processes that may seem irregular in an effort to identify problems or errors before they occur. Processes are monitored for control and feedback given to engineering for processes that have too many inconsistencies or variabilities. Work standards are met or improved. Seeks additional work to ensure high levels of productivity. PRIMARY DUTIES AND RESPONSIBILITIES: Reads and analyzes blueprints or engineering specifications to obtain product information. Measure dimensions such as length, height, distance and angles using standard and precision measuring instruments. Inspect first run/first article parts, including fabrication fit-ups, weldments and assemblies. Monitor inspection instrument calibrations. Share responsibility with department manager that all signoffs of previous operations are performed. This includes checking that the quantity on travelers matches actual part quantity. Check parts to ensure no handling damage has occurred during in-process movement. Check to be sure that “as built” drawings and inspection reports have variable data recorded, if applicable. Write reports and create charts regarding inspection and testing results. Communicates with co-workers, supervisors and customers to receive instructions and co-ordinate activities. Perform calibrations on NDT equipment and facilities as required. Examine defective parts to determine cause of defect and recommend changes or modifications in the process. Monitor welder certification and weld procedure qualification tests for adherence to the WPS. Perform the functions of lead auditor to perform internal audits in a timely manner to the requirement of the GTC Quality Manual, ISO, and other customer requirements. REQUIRED EDUCATION/KNOWLEDGE: High school diploma is required. Classroom training and the required hours of experience to attain at least two NDT disciplines. Training in SPC data collection techniques and evaluation. Training in use and safety of chemical handling and radiography. Classroom training in the area of personal certification/qualification level. Must be a US citizen. REQUIRED EXPERIENCE/SKILLS: Minimum 5 years' experience as a certified NDT Technician in at least one discipline. Minimum of 5 years' experience working with or around a metal joining/welding facility. Proven problem-solving skills with proven ability to establish an effective course of action. Minimum of 2 nationally recognized levels of competencies (i.e. ASNT, AWS) Eye Examination minimum requirement - Jaeger 1 at 12” with corrective lenses and the Ishihara Color Blindness Test. Exams are required on an annual basis. RELATIONSHIPS: Develops and maintains close working relationships with teams, operators, GTC supervisors and occasionally customer representatives. JOB ENVIRONMENT: Works across multiple areas including machine shops, fabrication facilities, and assembly bays to test various weld components. Environment involves exposure to machine oils, coolants, welding fumes, and metal particles during test activities. Moderate noise levels from nearby manufacturing operations while conducting tests. Climate-controlled inspection areas with specialized lighting for detailed visual examinations, though some tests occur in active production environments. Work performed under strict defense quality standards including AS9100, ISO 9001, and military specifications. Position requires handling of secured technical drawings, specifications, and sensitive defense component information. Documentation must meet rigorous traceability and accountability requirements for defense applications. PHYSICAL REQUIREMENTS: Must be able to stand and walk extensively throughout multiple facility areas during shift, typically 10-12 hours with frequent movement between test pieces. Requires ability to lift and maneuver parts and assemblies weighing up to 50 pounds for positioning during inspection processes. Extensive bending, kneeling, and crouching to access all areas of large assemblies and fabricated components. Fine motor skills and steady hands essential for operating precision measuring equipment including calipers, micrometers, and coordinate measuring machines. Excellent visual acuity required for detecting surface defects, dimensional variations, and weld quality issues. Ability to work at various heights using ladders and platforms when inspecting large assemblies. Manual dexterity needed for handling delicate measuring instruments and positioning components for detailed examination. Equal Opportunity Employer M/F/D/V All applicants will be considered for this position based upon experience and knowledge, without regard to race, color, religion, national origin, sexual orientation, ancestry, marital, disabled or veteran status. GTC is committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment.

Benefits: Flexible schedule Are you seeking a flexible work schedule and the potential to earn additional income with opportunities for growth? Do you prefer working outdoors rather than being confined to an office or warehouse? We are looking for 1099 Audit and Inventory Inspectors to perform field audit inspections in your area. Our contracted inspectors travel to various locations to capture photos, gather data, and upload information using their smartphones or computers. While most inspections involve automobiles and equipment, some may also include properties, product inventories, or property condition assessments. When you partner with us, you're collaborating with experienced professionals dedicated to delivering exceptional customer experiences. Over the years, we've expanded our business to become a leader in our industry, offering a range of services and business growth opportunities for our contractors. Our most successful Inspectors share common traits such as resourcefulness, discipline, personability, a strong work ethic, being detail-oriented, and the ability to persevere through challenges. May have even worked ride share or delivery services ie Uber, Door Dash etc. If this description resonates with you, we encourage you to apply today! Skills and Requirements: 1099 Independent Contractor status (be your own boss!) Flexible Schedule (daylight hours, Monday - Friday) Comfort working outdoors in various weather conditions Access to a fairly recent smartphone or tablet to execute jobs while on-site Availability of a computer with Wi-Fi to accept and schedule jobs. Ownership of a reliable vehicle and a valid driver's license Strong oral and written communication skills Proficiency with current operating systems (e.g., Google Chrome, IOS, Microsoft) Compensation/Service Fees: All inspectors are independent contractors and receive payment per inspection, with fees varying based on complexity and location. Job Types: Contract, Part-time Pay: Earnings can average around $1,500 per month or more, depending on your location, acceptance of offered contracts, and availability. Benefits: Flexible schedule Choose your own hours License/Certification: Driver's License (Required) Work Location: On the road, local distances. Compensation: $1,500.00 - $2,500.00 per month Global Staffing Service's objective is to provide highly qualified contract, contract-to-hire and direct-hire staff to our clients. We understand the technical requirements of the positions you need to staff and the importance of delivering a cost-effective solution in a timely manner. We custom-tailor a candidate search based on your specific needs. We will advise you on the ideal candidate profile and compensation package to attract the right people. We recruit nationwide, check references and mediate negotiations. Our particular focus includes but not limited to: (in no particular order) Executives Outside Sales Professionals Inside Sales Professionals Regional Managers Area Managers IT Professionals Finance Professionals Engineering Professionals Manufacturing Professionals Distribution Health Services We currently have over 500 positions available. Although this is a moving target, it constitutes the average number of openings at any given time.

This is a Part-Time Lane Inspector Position. Opus is a world-leading vehicle inspection and intelligent vehicle support company that has been contributing to a safer and cleaner world since the company was founded in 1990. We take pride in helping make our world a safer and cleaner place. Duties and Responsibilities: Lane Inspector - Vehicle Emissions testing. You will play an important role in limiting the production of Emissions by identifying the polluting vehicles. As a lane inspector, YOU will be responsible for the following: * Perform emission inspection functions following established procedures, and enter and verify vehicle information with computer data. * Operate vehicles during the emissions system test and use exhaust analysis equipment. * Direct motorists in and out of the station, provide test results, instruct customers on next steps in the inspection process, and collect inspection fees. * Other job duties as assigned. No experience required; we will train you! Requirements: * Must be 18 years of age. * Valid and unrestricted driver's license. * Physically able to stand, bend, stoop, kneel, and balance unassisted for extended periods of time. * Physically able to lift, push, and pull up to 20 lbs on an occasional basis. * Basic computer skills. * Saturday availability required - (State & Program Specific) * Part-time hours requirement is between 20 - 30 hours a week. - (State & Program Specific) Qualifications: * Team player. * Excellent customer service skills. * Ability to work efficiently and multitask in a fast-paced, busy shop environment with a smile and positive attitude. * Work in an environment that includes vehicle exhaust fumes, noise, and heat. * Work in all weather conditions. * Work safely around operating motor vehicles. All offers of employment are contingent upon completing and meeting the criteria of a background check, drug screening, and I-9 verification.

Logistical Data Services delivers a new, technology driven option for our industry. Our inspection and related platforms are customized, created for the needs of our individual customers. We provide software solutions including new vehicle inspections, claims processing, damage in-transit and major damage reporting, inventory, and terminal management services for Railroads, OEMs, Marine, and Trucking customers. Candidates must be 18 years of age or older, be able to pass a background check, high school diploma or equivalent, and reliable transportation. A flexible schedule is preferred. Training will be provided. Responsibilities: - Inspect product for defects, damages, or inconsistencies - Conduct visual inspections to ensure adherence to quality standards - Use various measuring tools and equipment to perform accurate measurements - Record inspection results via handheld device - Follow safety protocols and maintain a clean and organized work area Qualifications: - Strong attention to detail and ability to identify defects or irregularities - Previous experience in a similar role is not required, but would be preferred - Excellent communication skills and ability to work well within a team If you are a motivated individual with a keen eye for detail, we encourage you to apply for this position. Join our team and contribute to our commitment to delivering high-quality service. We are looking for 2nd shift part time automotive inspector, days of the week may be flexible 5:00pm - 2:00am Hourly Pay Range: $15 to $16.50

Industry-leading 25% Night Shift Differential YOUR SCHEDULE, YOUR CHOICE, YOUR PREMIUM PAY! Two Shifts * Days: 10-hour shifts starting between 5 & 6 am * Nights start at 5 pm: Your Schedule, Your Choice, Your Premium Pay. * M-F 8 hrs. or 10 hrs. * M-TH 10 hrs. or 12 hrs. * Retirees- work a part-time schedule on days or nights and receive a benefits package. FUNCTION: Performs NDT inspections (Penetrant, Magnetic Particle, X-Ray, Ultrasonic or Visual Inspections) as required and as personal certifications apply. Must have achieved national recognition as Level I, II or III by national accreditation. Note: A Level I is training and gaining work hours for certification. A Level II Inspector has one to three certifications of the five disciplines. A Level III Inspector has four or five certifications of the five disciplines. KEY RESULTS AREAS: * Perform NDT tests and compare to the related specs for acceptability. * Documentation is constantly and effectively monitored for accuracy and completeness. * Respond rapidly to the needs of operators, teams and management in order to meet production and customer needs. * Identify and implement ways to improve and eliminate waste, especially in the improvement of Quality efficiency. * Watch for manufacturing processes that may seem irregular in an effort to identify problems or errors before they occur. * Processes are monitored for control and feedback given to engineering for processes that have too many inconsistencies or variabilities. * Work standards are met or improved. * Seeks additional work to ensure high levels of productivity. PRIMARY DUTIES AND RESPONSIBILITIES: * Reads and analyzes blueprints or engineering specifications to obtain product information. * Measure dimensions such as length, height, distance and angles using standard and precision measuring instruments. * Inspect first run/first article parts, including fabrication fit-ups, weldments and assemblies. * Monitor inspection instrument calibrations. * Share responsibility with department manager that all signoffs of previous operations are performed. This includes checking that the quantity on travelers matches actual part quantity. Check parts to ensure no handling damage has occurred during in-process movement. Check to be sure that "as built" drawings and inspection reports have variable data recorded, if applicable. * Write reports and create charts regarding inspection and testing results. * Communicates with co-workers, supervisors and customers to receive instructions and co-ordinate activities. * Perform calibrations on NDT equipment and facilities as required. * Examine defective parts to determine cause of defect and recommend changes or modifications in the process. * Monitor welder certification and weld procedure qualification tests for adherence to the WPS. * Perform the functions of lead auditor to perform internal audits in a timely manner to the requirement of the GTC Quality Manual, ISO, and other customer requirements. REQUIRED EDUCATION/KNOWLEDGE: * High school diploma is required. * Classroom training and the required hours of experience to attain at least two NDT disciplines. * Training in SPC data collection techniques and evaluation. * Training in use and safety of chemical handling and radiography. * Classroom training in the area of personal certification/qualification level. * Must be a US citizen. REQUIRED EXPERIENCE/SKILLS: * Minimum 5 years' experience as a certified NDT Technician in at least one discipline. * Minimum of 5 years' experience working with or around a metal joining/welding facility. * Proven problem-solving skills with proven ability to establish an effective course of action. * Minimum of 2 nationally recognized levels of competencies (i.e. ASNT, AWS) * Eye Examination minimum requirement - Jaeger 1 at 12" with corrective lenses and the Ishihara Color Blindness Test. Exams are required on an annual basis. RELATIONSHIPS: * Develops and maintains close working relationships with teams, operators, GTC supervisors and occasionally customer representatives. JOB ENVIRONMENT: * Works across multiple areas including machine shops, fabrication facilities, and assembly bays to test various weld components. * Environment involves exposure to machine oils, coolants, welding fumes, and metal particles during test activities. * Moderate noise levels from nearby manufacturing operations while conducting tests. * Climate-controlled inspection areas with specialized lighting for detailed visual examinations, though some tests occur in active production environments. * Work performed under strict defense quality standards including AS9100, ISO 9001, and military specifications. * Position requires handling of secured technical drawings, specifications, and sensitive defense component information. * Documentation must meet rigorous traceability and accountability requirements for defense applications. PHYSICAL REQUIREMENTS: * Must be able to stand and walk extensively throughout multiple facility areas during shift, typically 10-12 hours with frequent movement between test pieces. * Requires ability to lift and maneuver parts and assemblies weighing up to 50 pounds for positioning during inspection processes. * Extensive bending, kneeling, and crouching to access all areas of large assemblies and fabricated components. * Fine motor skills and steady hands essential for operating precision measuring equipment including calipers, micrometers, and coordinate measuring machines. * Excellent visual acuity required for detecting surface defects, dimensional variations, and weld quality issues. * Ability to work at various heights using ladders and platforms when inspecting large assemblies. * Manual dexterity needed for handling delicate measuring instruments and positioning components for detailed examination. Equal Opportunity Employer M/F/D/V All applicants will be considered for this position based upon experience and knowledge, without regard to race, color, religion, national origin, sexual orientation, ancestry, marital, disabled or veteran status. GTC is committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment.

This is a Part-Time Lane Inspector Position. Opus is a world-leading vehicle inspection and intelligent vehicle support company that has been contributing to a safer and cleaner world since the company was founded in 1990. We take pride in helping make our world a safer and cleaner place. Duties and Responsibilities: Lane Inspector - Vehicle Emissions testing. You will play an important role in limiting the production of Emissions by identifying the polluting vehicles. As a lane inspector, YOU will be responsible for the following: * Perform emission inspection functions following established procedures, and enter and verify vehicle information with computer data. * Operate vehicles during the emissions system test and use exhaust analysis equipment. * Direct motorists in and out of the station, provide test results, instruct customers on next steps in the inspection process, and collect inspection fees. * Other job duties as assigned. No experience required; we will train you! Requirements: * Must be 18 years of age. * Valid and unrestricted driver's license. * Physically able to stand, bend, stoop, kneel, and balance unassisted for extended periods of time. * Physically able to lift, push, and pull up to 20 lbs on an occasional basis. * Basic computer skills. * Saturday availability required - (State & Program Specific) * Part-time hours requirement is between 20 - 30 hours a week. - (State & Program Specific) Qualifications: * Team player. * Excellent customer service skills. * Ability to work efficiently and multitask in a fast-paced, busy shop environment with a smile and positive attitude. * Work in an environment that includes vehicle exhaust fumes, noise, and heat. * Work in all weather conditions. * Work safely around operating motor vehicles. All offers of employment are contingent upon completing and meeting the criteria of a background check, drug screening, and I-9 verification.

Industry-leading 25% Night Shift Differential YOUR SCHEDULE, YOUR CHOICE, YOUR PREMIUM PAY! Two Shifts Days: 10-hour shifts starting between 5 & 6 am Nights start at 5 pm: Your Schedule, Your Choice, Your Premium Pay. M-F 8 hrs. or 10 hrs. M-TH 10 hrs. or 12 hrs. Retirees- work a part-time schedule on days or nights and receive a benefits package. FUNCTION: Performs NDT inspections (Penetrant, Magnetic Particle, X-Ray, Ultrasonic or Visual Inspections) as required and as personal certifications apply. Must have achieved national recognition as Level I, II or III by national accreditation. Note: A Level I is training and gaining work hours for certification. A Level II Inspector has one to three certifications of the five disciplines. A Level III Inspector has four or five certifications of the five disciplines. KEY RESULTS AREAS: Perform NDT tests and compare to the related specs for acceptability. Documentation is constantly and effectively monitored for accuracy and completeness. Respond rapidly to the needs of operators, teams and management in order to meet production and customer needs. Identify and implement ways to improve and eliminate waste, especially in the improvement of Quality efficiency. Watch for manufacturing processes that may seem irregular in an effort to identify problems or errors before they occur. Processes are monitored for control and feedback given to engineering for processes that have too many inconsistencies or variabilities. Work standards are met or improved. Seeks additional work to ensure high levels of productivity. PRIMARY DUTIES AND RESPONSIBILITIES: Reads and analyzes blueprints or engineering specifications to obtain product information. Measure dimensions such as length, height, distance and angles using standard and precision measuring instruments. Inspect first run/first article parts, including fabrication fit-ups, weldments and assemblies. Monitor inspection instrument calibrations. Share responsibility with department manager that all signoffs of previous operations are performed. This includes checking that the quantity on travelers matches actual part quantity. Check parts to ensure no handling damage has occurred during in-process movement. Check to be sure that “as built” drawings and inspection reports have variable data recorded, if applicable. Write reports and create charts regarding inspection and testing results. Communicates with co-workers, supervisors and customers to receive instructions and co-ordinate activities. Perform calibrations on NDT equipment and facilities as required. Examine defective parts to determine cause of defect and recommend changes or modifications in the process. Monitor welder certification and weld procedure qualification tests for adherence to the WPS. Perform the functions of lead auditor to perform internal audits in a timely manner to the requirement of the GTC Quality Manual, ISO, and other customer requirements. REQUIRED EDUCATION/KNOWLEDGE: High school diploma is required. Classroom training and the required hours of experience to attain at least two NDT disciplines. Training in SPC data collection techniques and evaluation. Training in use and safety of chemical handling and radiography. Classroom training in the area of personal certification/qualification level. Must be a US citizen. REQUIRED EXPERIENCE/SKILLS: Minimum 5 years' experience as a certified NDT Technician in at least one discipline. Minimum of 5 years' experience working with or around a metal joining/welding facility. Proven problem-solving skills with proven ability to establish an effective course of action. Minimum of 2 nationally recognized levels of competencies (i.e. ASNT, AWS) Eye Examination minimum requirement - Jaeger 1 at 12” with corrective lenses and the Ishihara Color Blindness Test. Exams are required on an annual basis. RELATIONSHIPS: Develops and maintains close working relationships with teams, operators, GTC supervisors and occasionally customer representatives. JOB ENVIRONMENT: Works across multiple areas including machine shops, fabrication facilities, and assembly bays to test various weld components. Environment involves exposure to machine oils, coolants, welding fumes, and metal particles during test activities. Moderate noise levels from nearby manufacturing operations while conducting tests. Climate-controlled inspection areas with specialized lighting for detailed visual examinations, though some tests occur in active production environments. Work performed under strict defense quality standards including AS9100, ISO 9001, and military specifications. Position requires handling of secured technical drawings, specifications, and sensitive defense component information. Documentation must meet rigorous traceability and accountability requirements for defense applications. PHYSICAL REQUIREMENTS: Must be able to stand and walk extensively throughout multiple facility areas during shift, typically 10-12 hours with frequent movement between test pieces. Requires ability to lift and maneuver parts and assemblies weighing up to 50 pounds for positioning during inspection processes. Extensive bending, kneeling, and crouching to access all areas of large assemblies and fabricated components. Fine motor skills and steady hands essential for operating precision measuring equipment including calipers, micrometers, and coordinate measuring machines. Excellent visual acuity required for detecting surface defects, dimensional variations, and weld quality issues. Ability to work at various heights using ladders and platforms when inspecting large assemblies. Manual dexterity needed for handling delicate measuring instruments and positioning components for detailed examination. Equal Opportunity Employer M/F/D/V All applicants will be considered for this position based upon experience and knowledge, without regard to race, color, religion, national origin, sexual orientation, ancestry, marital, disabled or veteran status. GTC is committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment.

Industry-leading 25% Night Shift Differential YOUR SCHEDULE, YOUR CHOICE, YOUR PREMIUM PAY! Two Shifts Days: 10-hour shifts starting between 5 & 6 am Nights start at 5 pm: Your Schedule, Your Choice, Your Premium Pay. M-F 8 hrs. or 10 hrs. M-TH 10 hrs. or 12 hrs. Retirees- work a part-time schedule on days or nights and receive a benefits package. FUNCTION: Performs NDT inspections (Penetrant, Magnetic Particle, X-Ray, Ultrasonic or Visual Inspections) as required and as personal certifications apply. Must have achieved national recognition as Level I, II or III by national accreditation. Note: A Level I is training and gaining work hours for certification. A Level II Inspector has one to three certifications of the five disciplines. A Level III Inspector has four or five certifications of the five disciplines. KEY RESULTS AREAS: Perform NDT tests and compare to the related specs for acceptability. Documentation is constantly and effectively monitored for accuracy and completeness. Respond rapidly to the needs of operators, teams and management in order to meet production and customer needs. Identify and implement ways to improve and eliminate waste, especially in the improvement of Quality efficiency. Watch for manufacturing processes that may seem irregular in an effort to identify problems or errors before they occur. Processes are monitored for control and feedback given to engineering for processes that have too many inconsistencies or variabilities. Work standards are met or improved. Seeks additional work to ensure high levels of productivity. PRIMARY DUTIES AND RESPONSIBILITIES: Reads and analyzes blueprints or engineering specifications to obtain product information. Measure dimensions such as length, height, distance and angles using standard and precision measuring instruments. Inspect first run/first article parts, including fabrication fit-ups, weldments and assemblies. Monitor inspection instrument calibrations. Share responsibility with department manager that all signoffs of previous operations are performed. This includes checking that the quantity on travelers matches actual part quantity. Check parts to ensure no handling damage has occurred during in-process movement. Check to be sure that “as built” drawings and inspection reports have variable data recorded, if applicable. Write reports and create charts regarding inspection and testing results. Communicates with co-workers, supervisors and customers to receive instructions and co-ordinate activities. Perform calibrations on NDT equipment and facilities as required. Examine defective parts to determine cause of defect and recommend changes or modifications in the process. Monitor welder certification and weld procedure qualification tests for adherence to the WPS. Perform the functions of lead auditor to perform internal audits in a timely manner to the requirement of the GTC Quality Manual, ISO, and other customer requirements. REQUIRED EDUCATION/KNOWLEDGE: High school diploma is required. Classroom training and the required hours of experience to attain at least two NDT disciplines. Training in SPC data collection techniques and evaluation. Training in use and safety of chemical handling and radiography. Classroom training in the area of personal certification/qualification level. REQUIRED EXPERIENCE/SKILLS: Minimum 5 years' experience as a certified NDT Technician in at least three disciplines. Minimum of 5 years' experience working with or around a metal joining/welding facility. Proven problem-solving skills with proven ability to establish an effective course of action. Minimum of 2 nationally recognized levels of competencies (i.e. ASNT, AWS) Eye Examination minimum requirement - Jaeger 1 at 12” with corrective lenses and the Ishihara Color Blindness Test. Exams are required on an annual basis. Interested and qualified applicants should apply using the provided link. Equal Opportunity Employer M/F/D/V All applicants will be considered for this position based upon experience and knowledge, without regard to race, color, religion, national origin, sexual orientation, ancestry, marital, disabled or veteran status. GTC is committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment.