Inspector jobs at Verify

RESPONSIBILITIES: Maintain accurate and up‐to‐date acceptance and rejection records and/or certifications systems as required by the applicable specifications. Determine acceptance or rejection after inspection and/or calibration of parts, tools, instruments or x‐ray film. Identify defective conditions and test failures and prepare all appropriate documentation and/or calibration history. INSPECTION: Perform inspection on complex parts using a wide variety of measuring and test equipment. Adapt and develop complex inspection set‐ups to check sample parts, forgings and castings. Check tool and jig layouts. Perform first article and envelope inspections, source inspections, and/or complex surface plate set‐ups. Interpret specifications, charts, manuals and other data to arrive at acceptance or rejection. Recommend changes to supervision. Use mathematics to convert blueprint dimension and tolerances. Work within the guidelines of drawings, schematics, blueprints, route sheets, travelers, quality directives, technical engineering specifications, customer's requirements and military standards. Layout all component part characteristics onto rough or semi‐machined castings, forgings and machine parts to maintain control of machining cycle during manufacturing. CALIBRATION: Perform calibration on complex multi‐function electronic measuring and test equipment. Set‐up calibration test conditions having various circuit requirements interpreting calibration procedures, specifications, manufacturer's instructions, or related documents. Ability to interpret drawings and electronic schematics. Document and evaluate historical data to determine calibration intervals. Diagnose and calibrate newly acquired complex electronic equipment. NONDESTRUCTIVE TEST: Perform daily, weekly and monthly equipment and material checks. Perform pre‐inspection and post‐inspection cleaning. Set‐up equipment and conduct tests. Interpret, evaluate and document inspection results in accordance with approved procedures. Perform complete inspections in accordance with applicable specifications, standards and other contractual documents. Operate X‐ray equipment and film processor. Select the method and technique to be used for a specific inspection. Prepare and verify the adequacy of inspection procedures. Job Requirements: Five years related inspection experience or demonstrated ability to perform described responsibilities. Knowledge of applicable military standards or specifications. Required experience in CMM operations, background in dimensioning and tolerancing per ANSI Y 14.5. Proficient in reading and interpreting blueprints, customer's specifications and internal drawings and procedures. Thorough knowledge of machine shop mathematics including trigonometry. Knowledge of electro‐hydraulic servo systems and the computer IEEE systems. Personal hand tools may be required. Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws.

Responsibilities: Conducts examinations and quality control inspections on products, materials and components at various stages of the production process to ensure compliance with established quality and reliability standards. Participates in analysis statistical data from processes to either confirm compliance with established standards or identify deviations from standards Performs routine visual inspection of soldered connections, mechanical inspections of electronic and electro-mechanical assemblies and subassemblies. Participates in preparing all necessary documentation for reporting acceptance/rejection of inspected and/or tested items. Qualifications: Ability to follow detailed job instructions. Able to apply a systematic Quality Assurance approach while using existing procedures to solve standard problems. Skilled at measuring and using test equipment as prescribed by job assignment. Capable of identifying and independently resolving routine issues. Experience with blueprints, drawings and parts lists. Familiar with the casting, forging, molding, stainless-steel and electronic components use in Aerospace industry. Education & Experience: Education: High School Diploma/Equivalent and work experience that will allow successful performance of job expectations. Certifications: Vocational training, apprenticeships or the equivalent experience in related field Years Experience: 2-5 years of relevant experience Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws.

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Material Tester B to join our Quality team in Everett, Washington. As an Inspector Material Tester, you will be at the forefront of ensuring the integrity and performance of critical aerospace materials and components. Your expertise in operating advanced testing equipment and interpreting complex specifications will directly impact the quality and safety of our products. This role offers a dynamic environment where precision, analytical skills, and problem-solving are essential, and where your contributions help shape the future of aviation technology. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Receive and prioritize jobs from vendors or stores based on lead instructions or shop procedures. Review inspection plans thoroughly, whether online or paper-based. Verify completeness and accuracy of all necessary documentation, including part numbers, serial numbers, lot numbers, and quantities. Select appropriate test procedures (e.g., shear, tensile, proof load) using software tools and Boeing specifications. Set test parameters and operate Universal Test Machines with proper fixtures to perform material and part tests. Set up and dismantle fixtures, jigs, and attachments using appropriate tools to facilitate testing. Operate various test equipment such as Static Tensile Testers, Oscillating Dynamic Loaders, Dead Weight Testers, hardness testers, extensometers, and stress-strain recorders, loading and unloading specimens as required. Use mathematical calculations (algebra, geometry, trigonometry) to compute test parameters per specifications. Perform a variety of tests including proof load, static load, tensile/compression, tensile/shear, torque inspections, weld procedure qualifications, and driveability tests on materials, parts, and assemblies. Verify weights of test items using scales to ensure compliance with specifications. Reject non-conforming materials or parts, document discrepancies citing relevant specifications, and submit reports to the Material Review Board (MRB). Secure non-conforming items to maintain control and traceability. Conduct re-inspections and initiate Reinspection Requests (R/R) as needed, coordinating with Material Review Segregation Area (MRSA) and other inspection groups. Use precision measurement tools (calipers, micrometers, dial indicators) to verify dimensions and compliance. Indicate Quality Assurance acceptance on paperwork and online systems, processing documentation per procedures. Monitor manufacturing processes such as chrome plating and heat treating to ensure quality standards. Ensure all tools and test equipment certifications are current. Interface with internal and external organizations (production, engineering, planning, customers) to resolve process or job-related issues. Assist and train lower-grade employees on functions, methods, and procedures. Work independently to plan, set up, and operate various test equipment to determine material properties such as hardness, tensile strength, compression strength, yield strength, and torque. Prepare and measure test specimens, record data, calculate areas and stresses, and plot stress-strain curves. Adapt and improvise equipment setups as needed. Troubleshoot test-related problems and coordinate with engineering to analyze defects and recommend corrective actions. Initiate and document nonconforming materials, hardware, software, tools, parts, or assemblies according to specifications and procedures. Perform audits and surveillance of manufacturing and quality assurance processes to ensure compliance. Utilize blueprints, drawings, specifications, inspection manuals, and mathematical formulas (including trigonometry) to complete assignments. Test raw materials (metals, fabrics, textiles, plastics) and semi-finished materials (castings, forgings, cables, hose, sandwich panels). Conduct proof load tests on miscellaneous equipment such as safety belts, slings, and handling equipment. Refer questionable cases or suggested improvements to lead inspectors or supervisors. Prepare data for test reports as required. Follow inspection procedures to accept or reject materials or parts. Analyze problems involving forces, moments, and stresses. Review manufacturers' technical test reports for accuracy and completeness. Collaborate with engineering, suppliers, FAA, and airline customer representatives to develop and improve testing processes. Coordinate with other departments and customers to accomplish work assignments. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic Qualifications: 3+ years of experience reading and interpreting drawings and blueprints 3+ years of experience using precision measurement equipment 3+ years of experience using computers and learning new computer systems Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel Preferred Qualifications: 3+ years of experience in inspection and inspection techniques 3+ years of experience in mechanical testing Typical Education & Experience: High school graduate or GED preferred. Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Dec. 29, 2025 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Aviation Maintenance Inspector to join our Field team in Everett, Washington. As an Aviation Maintenance Inspector, you will be instrumental in upholding the highest standards of quality and safety within our aircraft maintenance operations. Your primary responsibility will be to conduct thorough inspections of aircraft structures, systems, and components, ensuring compliance with industry regulations and safety protocols. You will meticulously evaluate maintenance work, troubleshoot issues, and document any nonconforming materials or processes to maintain rigorous quality assurance. A Color Vision Certification may be necessary for portions of this job. Your expertise will be essential in performing airworthiness inspections and coordinating with regulatory bodies, ensuring that all aircraft are flight-ready and meet stringent specifications. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Conduct audits and surveillance of all manufacturing and quality assurance processes, ensuring compliance with specifications, processes, and procedures. Perform quality functions, including customer and FAA coordination, configuration change verification, conformity inspections, and airworthiness inspections (both pre-flight and post-flight). Initiate and document any nonconforming materials, hardware, software, tools, parts, or assemblies in accordance with established specifications and procedures. Utilize technical specifications, sketches, manuals, and FAA publications to effectively accomplish inspection assignments. Maintain all company and FAA-required records and inspection forms, ensuring accuracy and compliance. Uphold a safe, clean, and organized work environment while planning and organizing work packages to promote efficient operations and meet predetermined schedules. Operate various information systems, including company web-based systems and Microsoft Office products, to perform assigned tasks. Interpret and adhere to airworthiness directives, service bulletins, and other approved data to ensure compliance. Apply mathematical calculations to set up and use precision measuring tools for accurate measurements of gaps, heights, angles, and hole dimensions. Create production aids as needed to facilitate inspection assignments. Maintain necessary certifications, licenses, and permits required for the role. Exchange information with suppliers, customers, and company representatives to explain or demonstrate operations, tests, or any difficulties encountered. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights up to 35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee. Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. Basic Qualifications: 5+ years of experience with aircraft maintenance inspection on powered aircraft with military, airline or certificated repair station background in electrical systems or complex mechanical systems (e.g. hydraulics, pneumatics, heavy machinery, diesel, construction) (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience). Must be willing to work any shift; including days, evenings, nights, and weekends. Preferred Qualifications: FAA Airframe and Powerplant Certificate. Please note your certificate number on your resume if you are certified. 10+ years of experience with aircraft maintenance inspection on powered aircraft with military, airline or certificated repair station background in electrical systems or complex mechanical systems (e.g. hydraulics, pneumatics, heavy machinery, diesel, construction) (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience). Typical Education & Experience: High school graduate or GED preferred. Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: This role is primarily 2nd shift; however, there may be additional shift requirements to support program objectives. Safety Sensitive Statement: This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $36.10/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Jan. 12, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Fabrication B to join our Quality team in Puget Sound, Washington. Join our dedicated team as an Inspector Fabrication, where your keen eye for detail will be essential in ensuring the integrity of our fabricated parts and assemblies. In this critical role, you will perform thorough inspections of materials and components. Collaborating closely with Engineering, Quality, and Manufacturing, you will play a key role in evaluating and improving build processes while investigating and resolving defect-related issues. Your expertise in using precision measuring instruments will enable you to assess dimensions and workmanship accurately, while your ability to document nonconforming items will help maintain high standards of production. With a focus on continuous improvement, you will conduct audits and in-process inspections, ensuring compliance with all specifications. If you are passionate about maintaining excellence in fabrication and thrive in a fast-paced environment, we invite you to contribute to our mission of delivering top-quality products. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Perform inspections of fabricated detail parts, materials, and assemblies for workmanship, alignment, fit, and conformance to blueprints and specifications. Inspect fabricated and machined parts, subassemblies, and tooling to ensure compliance with engineering specifications and quality standards. Collaborate with Engineering, Quality, and Manufacturing to evaluate and improve build processes and defect reduction methods. Investigate and resolve defect-related problems, initiating and implementing project plans for quality improvement. Document any nonconforming materials, hardware, tools, or assemblies according to established specifications and procedures. Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance with specifications. Verify part numbers, serial numbers, and quantities against required paperwork upon receipt of parts and assemblies. Ensure all paperwork, including drawings and specifications, is complete, accurate, and up-to-date. Select and set up appropriate measuring instruments to check dimensions and workmanship of parts and assemblies. Inspect dimensions and workmanship, including visual weld inspections, according to drawings and specifications. Identify, document, and reject nonconforming parts/assemblies, noting discrepancies and required corrections. Perform re-inspections and initiate Re-inspection Requests (R/R) as needed, communicating with relevant inspection groups. Conduct in-process inspections, audits, and monitor heat treat processes, documenting required information. Verify certifications of tools, equipment, and personnel to ensure they are current and compliant. Handle and dispose of hazardous materials in accordance with safety regulations and contact supervisors for assistance when needed. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Basic Qualifications: 3+ years of experience as a Quality Inspector. 3+ years of experience reading and understanding engineering drawings, blueprints, and specifications. 3+ years of Experience using software applications for internet navigation, email, Microsoft Suite and/or other specialized computer applications. 1+ years of experience in metal or composite fabrication in aerospace. Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel. Preferred Qualifications: Experience in Foreign Object Debris (FOD) risk 1+ years of experience inspecting aircraft/aerospace parts, components, and/or assemblies for conformance with applicable drawings, specifications, quality standards, and manufacturing plans. Typical Education & Experience: High school graduate or GED preferred. Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Jan. 12, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington. As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes. Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards. To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations. You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements. Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks. Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells. Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required. Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives. Initiate and document any nonconforming materials or assemblies according to specifications and procedures. Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance. Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements. Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies. Inspect mockups of engineering design changes to ensure adherence to specifications. Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes. Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records. Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required. Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts. Document discrepancies and report them to the appropriate personnel for resolution. Assist in the training and instruction of lower-grade inspectors, providing guidance as needed. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Basic Qualifications: 3+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design). 3+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators. 1+ years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices. Experience as a Quality Inspector. Experience working with Microsoft Office (Excel, Word, PowerPoint). Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel. Ability to complete Fall Protection Training. Preferred Qualifications: Experience inspecting welds / welds certification Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.) Typical Education & Experience: High school graduate or GED preferred. Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Jan. 30, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

About Us Endeavor Air is a wholly-owned subsidiary of Delta Air Lines. Flying as Delta Connection, Endeavor operates 141 regional jets on 750 daily flights to 122 destinations in the United States, Canada, and the Caribbean. Headquartered in Minneapolis, Minn., Endeavor has hub operations in Atlanta, Cincinnati, Detroit, Minneapolis, New York, and Raleigh-Durham, and 11 maintenance bases across our network. Our Culture We know that our people are our greatest assets, and we are committed to building a culture where employees love coming to work each day. At Endeavor Air, we foster a diverse, culturally-rich and safe workplace where employees are treated with dignity and respect. With a culture built on safety, excellence, and teamwork, Endeavor offers limitless potential for aviation professionals looking to start or continue their careers. Our team promotes an inclusive environment in all aspects of the airline and our operation. As an EEO employer, we provide opportunities for all qualified candidates without regards to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran, or disabled status. Overview The Inspector performs inspection duties to determine the airworthiness of aircraft. Responsibilities * Responsible for the efficient and economical determination of airworthiness of aircraft maintenance and other work while assigned to Quality Control. * Provide all possible assistance to maintenance operations, including supervision, inspection and training. * Strong oral and written communication skills and abilities. * Computer proficiency using Microsoft Office suite including word, excel and data input functions Perform additional functions that may be assigned from time to time. * Demonstrate behavior in accordance with Endeavor Air "Code of Conduct" in all Company business dealings and decisions. * Demonstrate a high level of focus on customer service. * Must be able use ladders, work stands, lifts, etc. and be able to work on all areas of the aircraft that may require access during performance of duties. * Must have normal color perception and corrected visual acuity of 20/20 to perform non-destructive testing. * Must not have any medical condition that precludes certification as aircraft run/taxi qualified. * Repetitive motion such as: typing on the computer and phone work. * Occasional physical exertion such as: pulling, pushing, reaching, bending, standing, walking, and light lifting of boxes, bags, files, and electronic equipment not in excess of 50 lbs. * Working in hangar or stockroom and subjected to noise such as airport runway, and pneumatic tools. * Computer work in a typical office environment, sometimes sitting for the majority of the day. * A uniform is required, Endeavor provides a uniform allowance. * Safety shoes are required and cost covered by employee Qualifications * High School graduate or GED equivalent. * Must hold a valid Airframe and Powerplant Mechanic's license. * Experience as an Aircraft Maintenance Technician required, inspector experience preferred. * Must demonstrate the maturity, judgment, and analytical ability to objectively perform oversight within all aspects of aircraft maintenance. * Ability to work in a fast-paced environment handling multiple tasks with a high degree of attention to detail. * Strong work ethic, reliable, self-motivated with a positive attitude, and very customer service oriented. * Strong oral and written communication skills are required. * Ability to work scheduled and/or extra hours when necessary including nights, weekends, and holidays. * Must possess a valid driver's license and if position requires use of company vehicle(s), must be insurable under company insurance coverage. * Must have or be able to obtain a valid U.S. passport. * Limited travel may be necessary. * May require annual eye exam as required by FAA. What We Offer Providing world-class service to our customers starts with providing world-class benefits to our employees. Endeavor Air employees receive a competitive total compensation package which includes a variety of benefits to choose from and some of the best perks around. * Free or reduced-rate travel privileges on Delta Air Lines and 80+ air carriers worldwide for employees and eligible family members * Comprehensive Medical, Dental, and Vision Plans * 401(k) with Company Match starting on Day 1 * Operational Performance Rewards (OPR) Program * Life and AD&D Insurance, Short and Long-term Disability, Flexible Spending Accounts (FSA), and voluntary supplementary benefit options FLSA Status Hourly Minimum Position Pay Range USD $32.25/Hr. Maximum Position Pay Range USD $39.28/Hr.

About Us Endeavor Air is a wholly-owned subsidiary of Delta Air Lines. Flying as Delta Connection, Endeavor operates 141 regional jets on 750 daily flights to 122 destinations in the United States, Canada, and the Caribbean. Headquartered in Minneapolis, Minn., Endeavor has hub operations in Atlanta, Cincinnati, Detroit, Minneapolis, New York, and Raleigh-Durham, and 11 maintenance bases across our network. Our Culture We know that our people are our greatest assets, and we are committed to building a culture where employees love coming to work each day. At Endeavor Air, we foster a diverse, culturally-rich and safe workplace where employees are treated with dignity and respect. With a culture built on safety, excellence, and teamwork, Endeavor offers limitless potential for aviation professionals looking to start or continue their careers. Our team promotes an inclusive environment in all aspects of the airline and our operation. As an EEO employer, we provide opportunities for all qualified candidates without regards to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran, or disabled status. Overview The Inspector performs inspection duties to determine the airworthiness of aircraft. Responsibilities Responsible for the efficient and economical determination of airworthiness of aircraft maintenance and other work while assigned to Quality Control. Provide all possible assistance to maintenance operations, including supervision, inspection and training. Strong oral and written communication skills and abilities. Computer proficiency using Microsoft Office suite including word, excel and data input functions Perform additional functions that may be assigned from time to time. Demonstrate behavior in accordance with Endeavor Air “Code of Conduct” in all Company business dealings and decisions. Demonstrate a high level of focus on customer service. Must be able use ladders, work stands, lifts, etc. and be able to work on all areas of the aircraft that may require access during performance of duties. Must have normal color perception and corrected visual acuity of 20/20 to perform non-destructive testing. Must not have any medical condition that precludes certification as aircraft run/taxi qualified. Repetitive motion such as: typing on the computer and phone work. Occasional physical exertion such as: pulling, pushing, reaching, bending, standing, walking, and light lifting of boxes, bags, files, and electronic equipment not in excess of 50 lbs. Working in hangar or stockroom and subjected to noise such as airport runway, and pneumatic tools. Computer work in a typical office environment, sometimes sitting for the majority of the day. A uniform is required, Endeavor provides a uniform allowance. Safety shoes are required and cost covered by employee Qualifications High School graduate or GED equivalent. Must hold a valid Airframe and Powerplant Mechanic's license. Experience as an Aircraft Maintenance Technician required, inspector experience preferred. Must demonstrate the maturity, judgment, and analytical ability to objectively perform oversight within all aspects of aircraft maintenance. Ability to work in a fast-paced environment handling multiple tasks with a high degree of attention to detail. Strong work ethic, reliable, self-motivated with a positive attitude, and very customer service oriented. Strong oral and written communication skills are required. Ability to work scheduled and/or extra hours when necessary including nights, weekends, and holidays. Must possess a valid driver's license and if position requires use of company vehicle(s), must be insurable under company insurance coverage. Must have or be able to obtain a valid U.S. passport. Limited travel may be necessary. May require annual eye exam as required by FAA. What We Offer Providing world-class service to our customers starts with providing world-class benefits to our employees. Endeavor Air employees receive a competitive total compensation package which includes a variety of benefits to choose from and some of the best perks around. Free or reduced-rate travel privileges on Delta Air Lines and 80+ air carriers worldwide for employees and eligible family members Comprehensive Medical, Dental, and Vision Plans 401(k) with Company Match starting on Day 1 Operational Performance Rewards (OPR) Program Life and AD&D Insurance, Short and Long-term Disability, Flexible Spending Accounts (FSA), and voluntary supplementary benefit options FLSA Status Hourly Minimum Position Pay Range USD $32.25/Hr. Maximum Position Pay Range USD $39.28/Hr.

PITT OHIO, a $900 million, high service, highly profitable, transportation solutions provider offering SUPPLY CHAIN, LTL and TRUCKLOAD services is seeking a Freight Inspector Weights and Measures at our Cincinnati, OH Terminal. Moved to Top Rate $28.05/hour after 6 months We offer overtime IMMEDIATELY after 40 hours worked. This position does not require any prior experience! Our team will provide on the job training. PITT OHIO has received countless safety, service, and carrier of the year awards and our highly acclaimed Safety Department is a leader in the transportation industry. Dedication to quality and excellence is our goal at PITT OHIO. We offer competitive wages, medical and prescription insurance with no weekly premiums, vision, dental, 401K, profit sharing, vacation paid at 45 hours per week, pleasant work environment, and much more! Responsibilities Essential Duties Measure freight and enter information into the computer system Perform simple mathematical calculations regarding freight measurements Look up and apply correct classifications to the freight Generate and submit reports regarding freight weights and measures Process all paperwork daily associated with the execution of the job Lift various types of materials including cartons, bags, cylinders, boxes, crates, drums, pipe, bars, rugs, etc. Use common material handling tools will be used (carts, dollies, pallet jacks, and tow motors) to move freight for inspection purposes Work in a safe and professional manner to reduce personal risks and risk to fellow employees Comply with federal, state, and company regulations Be available and willing to work; exceptions require management approval Work in a positive, supportive, and cooperative way at all times Perform other duties as directed or requested Qualifications Minimum Requirements: Previous experience not required Must have command of the English language with the ability to read, write, and communicate effectively with internal and external customers, and perform simple mathematical calculations Must be self-motivated and able to self-manage Ability to use Microsoft Office tools (Excel, Outlook, etc) Standing, walking, pushing, pulling, twisting, carrying, bending, reaching, and lifting both above and below waist level will be required. Heavy lifting will be required. Must possess good math and typing skills A minimum age of 18 years of age. Must pass a NON -Department of Transportation (DOT) physical examination. Must consent to a pre-employment drug screen. PITT OHIO must receive a negative result. Must consent to a ten-year check on work history. Any gap of 30 days or more must be indicated and explained, and you may be asked to provide documentation. Discrepancies may prevent your application from being processed and job offer withdrawn. You will be an at-will employee throughout your employment with PITT OHIO. Nothing in these guidelines, your application or in the employee handbook guarantees employment for any period of time or is intended to be a contract of employment. PITT OHIO is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, veteran status, genetic data, religion or other legally protected status. #POE2 Pay Range Starting from USD $24.99/Yr.

Are you looking to join a dynamic team that provides its people with the tools to be successfull and opportunities to grow? Universal Logistics is a leading provider of customized transportation and logistics solutions, offering a comprehensive suite of services including transportation, value-added, intermodal, and specialized services utilized throughout entire supply chains. Universal has immediate career opportunities in your area. Apply today to become part of the Universal team! Date posted: October 6, 2025 Pay: $27.50 per hour Job description: Parsec, LLC, a subsidiary of Universal Logistics Holdings, Inc., is a leading provider of contract intermodal management services throughout North America. Parsec's experienced management team, with its state-of-the art equipment provides solutions to its customers resulting in proven efficiencies and savings. We focus every day to be the most efficient leader in the transportation industry, while serving our customers and people with utmost respect and integrity. We are currently hiring for a supervisor position of the Depot Gate. This role is essential to the daily operations of our terminal and is responsible for efficiently and accurately coordinates the movement of trucks and containers in and out of the facility while inspecting trailers, chassis, and containers for any type of damage. Gate Inspector Pay Rate- $27.50 hourly Watch our Parsec, Inc.- Team Member Interviews: ******************************************* Benefits: Medical (3 plan options) Dental & Vision 401(k) Paid Weekly Paid Time Off (Vacation & Sick Days - after probationary period) Amazing Opportunity for Growth Responsibilities: Gate Inspector Performs inspections chassis entering or leaving the yard gate using a hand-held device Mark & input the issues found of the chassis Weekly Yard Inventory Check Direct Drivers Chassis Lots Performs work in accordance with established safety & quality management procedures Operate Yard Hostler & Forklift Other duties as assigned Requirements Strong customer service skills Computer Literate Attention to detail Ability to follow directions Ability to work in an outside environment in all weather conditions year round Qualifications: Previous experience as a gate clerk or in a similar role within the intermodal rail or logistic industry is preferred Valid driver's license High school diploma or equivalent Excellent communication and interpersonal skills Strong attention to detail and accuracy in data entry and recordkeeping Ability to multitask and prioritize tasks effectively in a fast-paced environment Proficiency in using computer systems and data entry software Basic knowledge of transportation and logistics operations Familiarity with relevant safety and security regulations Ability to work independently as well as in a team environment Competencies: Problem Solving--Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics. Customer Service--Manages difficult or emotional customer situations; Responds promptly to customer needs; Solicits customer feedback to improve service; Responds to requests for service and assistance; Meets commitments. Interpersonal Skills--Focuses on solving conflict, not blaming; Maintains confidentiality; Listens to others without interrupting; Keeps emotions under control; Remains open to others' ideas and tries new things. Oral Communication--Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings. Parsec is an equal opportunity employer and does not discriminate against applicants or employees on the basis of race, color, religion, gender including pregnancy, childbirth, or related medical conditions), genetic information, national origin, ancestry, age, physical or mental disability, legally protected medical conditions, family care status, veteran status, sexual orientation, or any other basis protected by local, state or federal laws. Job Type: Full-time Benefits: 401(k) Dental insurance Health insurance

Inspector (TFE731) Lead Build an Aviation Career You're Proud Of Your work ties us all together, helping our teams function and operate. Experience opportunities to learn and be a part of an organization that has your back. And with competitive compensation and total rewards, you'll also enjoy our great perks. Take charge of our day-to-day operations, so we remain the trusted source for aviation repair and maintenance. Work with your team to implement the right processes and practices across our organization to help ensure flight and product efficiency. As a Lead Inspector, you will oversee the inspection, release and certification of products processed within production areas of the business unit. Responsible for the certification of products and for aligning the inspection group to meet internal and external customer targets. A portion of assigned working hours, will continue to perform hands-on technical work based on existing qualifications attained as a Technician. What you'll do: Assists Operations Managers with production flow, and planning. Leads, assigns work to inspectors. Reviews work in process and checks completed work to ensure quality and timely completion of job assignments. Eliminates ordinary difficulties encountered in regular job assignments. Demonstrates and encourages a team environment and works with team members to resolve conflicts. Instructs other employees in the proper method and procedures of performing jobs when required. Uses production systems to generate production routings, retrieve technical work instructions, document product condition, requisition material, report labor usage, and report product location and production status. Generates measures of performance (MOP's) and assists with analysis and development of actions. Provides support and guidance to production team and able to troubleshoot issues/problems. Works with the Operations Managers to determine cell inspection training requirements, monitors progress to the plan and addresses any gaps. Assists with maintaining the cell skills matrix and iteration tracking. Provides performance evaluation input to the Operations Managers for inspection team members. Recognizes and understands flight/product safety critical parts and processes. Responsible for immediately reporting any flight/product safety concerns. Participates in pro-active risk analysis of flight/product safety critical parts and processes. Updates and reports out on cost of poor quality. Leads and participates in identification of root cause and corrective actions. Activity promotes CI, monitors progress within the cell and assists where required to ensure goals are met. Acts as the primary liaison with engineering and other production personnel as required to troubleshoot, research, and solve technical problems. Ensures all applicable safety requirements are followed and address any unsafe practices/conditions immediately. Performs hands-on technical work based on existing qualifications attained as Detail and/or Quality Inspector. Position Requirements: Minimum 5 years of experience. Qualified in the detail and/or quality inspection functions. Knowledgeable in the configuration and assembly of the products processed in the cells. Knowledgeable in the assembly methods and techniques used. Proficient in the use of precision measuring instruments. Proficient in dimensional inspection techniques. Demonstrated knowledge of the applicable regulatory requirements relating to maintenance of aeronautical products. Knowledgeable on the documentation completion requirements. Knowledgeable in the quality requirements relating to the production process. Proficient in decision making to ensure compliance to all customers, regulatory and company requirements. Proficient in communication skills. Ability to guide and train other levels of technicians. Expertise with technical documents and manuals including, but not limited to company instructions, company processes, overhaul manuals, service bulletins and OEM manuals. Must be able to read and interpret technical manuals, instructions, blueprints and drawings. Must be proficient in the use of tools, PME, and instruments necessary for the accomplishment of job duties. Must have an understanding and working knowledge of hazardous material handling and disposal. Strong planning, organizational, analytical, interpersonal, oral and written communication skills. Must have demonstrated ability to use good judgment and make sound decisions. Must be authorized to work in the U.S. Preferred Characteristics: Must possess leadership qualities to include demonstrated ability to cooperate and work well with others. Must have ability to perform high quality of work in a reasonable length of time, lead and direct the work of others. Highly proficient with in depth knowledge of products, processes and technical functions within the production cells. Working knowledge of production management computer system and other related internal control systems. Regularly required to sit for prolonged periods. Benefits that make life better: Comprehensive Healthcare 401(k) with 100% company match; up to 5% vested Paid Time Off starting on day one Bonus opportunities Health- & Dependent Care Flexible Spending Accounts Short- & Long-Term Disability Life & AD&D Insurance Learning & Training opportunities #LI-GH1

Job Description Monday-Friday 7:00am-3:30pm About Us Genie Reconditioning, LLC specializes in restoring Genie aerial lifts and material handling equipment to like-new condition. We are dedicated to delivering safe, reliable, and cost-effective solutions while maintaining a culture of quality, teamwork, and continuous improvement. Position Summary: The Audit and Inspections Lead plays a critical role in ensuring the quality, compliance, and readiness of reconditioned Genie equipment. Reporting to the Quality Management System (QMS) Lead, this position is responsible for leading the audit and inspection processes throughout the reconditioning lifecycle-from inbound core inspections through final quality checks before shipment. This role develops inspection protocols, leads root cause investigations, supports operator training, and champions quality standards aligned with Genie and Genie Recon expectations. What You Will Do: Lead Quality Inspections: Conduct and oversee incoming, in-process and final inspections of reconditioned Genie equipment (boom lifts, scissor lifts, components, etc.) across key production areas: Core Receiving, Disassembly, Wash, Blast, Paint, Sub Assembly, and Final Assembly. Audit Processes for Compliance: Execute layered process audits (LPAs), workstation audits, and documentation reviews to ensure adherence to standard operating procedures (SOPs), safety standards, and quality protocols. Inbound Core Evaluation: Partner with receiving and technical teams to inspect inbound core units for damage, missing components, and suitability for reconditioning. Support disposition decisions with documentation and photos. Corrective Actions & Root Cause: Lead containment, investigation, and corrective actions when defects are discovered. Drive root cause analysis and track effectiveness of corrective actions through follow-up audits. Inspection Documentation: Maintain accurate inspection records, audit logs, and non-conformance reports. Provide visibility into quality trends and recurring issues. Cross-Functional Collaboration: Work closely with team leads, production staff, engineering, and supply chain to ensure continuous improvement and readiness of each unit for customer delivery. Support Operator Training: Identify training gaps related to quality and inspection processes. Assist in reinforcing best practices through on-the-floor coaching. Escalation & Reporting: Escalate critical issues to the QMS Lead and Production Manager. Contribute to weekly quality reports, board-level metrics, and huddle discussions. MINIMUM QUALIFICATIONS PREFERRED: High school diploma or GED; associate or technical degree preferred 3+ years of experience in inspection, quality control, or audit roles in a manufacturing or industrial environment Familiarity with mobile elevated work platforms (MEWPs) or related equipment strongly preferred Knowledge of inspection tools, quality standards, and non-conformance tracking systems Strong attention to detail, organization, and documentation discipline Ability to read blueprints, BOMs, and technical drawings Experience with QMS and continuous improvement programs (Lean, Six Sigma, ISO, etc.) Proficiency in Microsoft Office and/or quality tracking software Strong communication and leadership presence on the shop floor Location: 2065 E Pythian St, Springfield, MO 65802

Job SummaryResponsible to maintain quality standards by approval of incoming materials, in-process inspections, and finished products using visual, inspection equipment, tools, and quality knowledge. Entry of data and maintaining of records to ensure compliance to regulations and certifications.Essential Functions and Responsibilities include the following.• Perform in-process and final inspections of parts and assemblies to Engineering drawings and specifications.• Perform specialized inspections, such as first article or conformity• Perform incoming receiving inspection of materials, parts, and assemblies.• Initiate Non-Conformance Reports for discrepant products and maintains NCR quarantine area• Maintain scrap product (e.g. tags, quarantine, log) and render product unusable prior to disposal• Help maintain tool and equipment calibration• Assist with maintaining incoming inspection priorities and part movement through the inspection area• Assist with execution of compliance standards, department processes, and written procedures• Other Duties as assigned.• Regular scheduled attendance• Indicate the percentage of time spent traveling Subject to applicable laws and Air Method's policies, regular attendance is an essential function of the position. All employees must follow Air Methods' employment practices and policies.Supervisory ResponsibilitiesThis position has no supervisory responsibilities. QualificationsTo perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. In accordance with applicable laws, Air Methods will provide reasonable accommodations that do not create an undue burden so disabled employees may perform the essential functions of the position.Education & Experience• High school diploma or general education degree (GED); and three to five years' quality inspection related experience and/or training; or equivalent combination of education and experience.• Aviation or Manufacturing equivalent experience preferred• Knowledge of AS9100 and Part 21 PMA regulations• Knowledge of inspection tools such as micrometers, height gage, calipers, and optical comparators.• Ability to read and interpret engineering drawings and specifications Skills• Strong interpersonal skills and a high degree of collaboration at all levels• Ability to work with individuals within other departments to problem solve, root cause, and continuous improvement.Computer Skills• Proficient with Microsoft Suite, including Word, Excel, and Outlook• Previous experience working with databases and quality systems to enter daily inspection data and provide documentation Certificates, Licenses, Registrations• None"Air Methods is an EEO/AA employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status." Minimum pay USD $47,075.00/Yr. Maximum Pay USD $68,175.00/Yr. Benefits For more information on our industry-leading benefits, please visit our benefits page here. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Responsible to maintain quality standards by approval of incoming materials, in-process inspections, and finished products using visual, inspection equipment, tools, and quality knowledge. Entry of data and maintaining of records to ensure compliance to regulations and certifications. Essential Functions and Responsibilities include the following. • Perform in-process and final inspections of parts and assemblies to Engineering drawings and specifications. • Perform specialized inspections, such as first article or conformity • Perform incoming receiving inspection of materials, parts, and assemblies. • Initiate Non-Conformance Reports for discrepant products and maintains NCR quarantine area • Maintain scrap product (e.g. tags, quarantine, log) and render product unusable prior to disposal • Help maintain tool and equipment calibration • Assist with maintaining incoming inspection priorities and part movement through the inspection area • Assist with execution of compliance standards, department processes, and written procedures • Other Duties as assigned. • Regular scheduled attendance • Indicate the percentage of time spent traveling Subject to applicable laws and Air Method's policies, regular attendance is an essential function of the position. All employees must follow Air Methods' employment practices and policies. Supervisory Responsibilities This position has no supervisory responsibilities. Qualifications To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. In accordance with applicable laws, Air Methods will provide reasonable accommodations that do not create an undue burden so disabled employees may perform the essential functions of the position. Education & Experience • High school diploma or general education degree (GED); and three to five years' quality inspection related experience and/or training; or equivalent combination of education and experience. • Aviation or Manufacturing equivalent experience preferred • Knowledge of AS9100 and Part 21 PMA regulations • Knowledge of inspection tools such as micrometers, height gage, calipers, and optical comparators. • Ability to read and interpret engineering drawings and specifications Skills • Strong interpersonal skills and a high degree of collaboration at all levels • Ability to work with individuals within other departments to problem solve, root cause, and continuous improvement. Computer Skills • Proficient with Microsoft Suite, including Word, Excel, and Outlook • Previous experience working with databases and quality systems to enter daily inspection data and provide documentation Certificates, Licenses, Registrations • None “Air Methods is an EEO/AA employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.” Minimum pay USD $26.20/Hr. Maximum Pay USD $32.08/Hr. Benefits For more information on our industry-leading benefits, please visit our benefits page here. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Trident Maritime Systems, LLC in Newport News, VA is seeking a detail-oriented and experienced Receipt Inspector to join our team in the shipbuilding industry. This position is responsible for inspecting incoming materials, components, and equipment to ensure they meet Navy shipbuilding specifications, standards, and quality requirements. The ideal candidate will have strong blueprint-reading skills, proficiency with precision measuring instruments, and an exceptional eye for detail. Key Responsibilities Inspect incoming shipbuilding materials, components, and equipment upon receipt to verify compliance with purchase order requirements, specifications, and quality standards. Read and interpret Navy shipbuilding blueprints/drawings to confirm material specifications, tolerances, and acceptance criteria. Use precision measuring and testing equipment (calipers, micrometers, gauges, etc.) to verify dimensions, tolerances, and material characteristics. Conduct visual inspections to identify defects, damage, discrepancies, or non-conformities in received materials. Document inspection results, prepare detailed reports, and maintain accurate records of inspections, test results, and any non-conformances. Collaborate with purchasing, logistics, engineering, and production teams to address quality issues, resolve discrepancies, and coordinate corrective actions. Support internal and external audits by providing inspection documentation and participating in quality review processes. Adhere to established quality control procedures, standards, and safety protocols. Stay informed of industry best practices and evolving quality standards related to shipbuilding. Requirements High school diploma or equivalent. Proven experience in reading Navy shipbuilding blueprints/drawings and interpreting material specifications. Strong knowledge of shipbuilding processes, materials, and quality control requirements. Proficiency with precision measuring instruments (calipers, micrometers, gauges, etc.). Exceptional attention to detail with the ability to identify and document defects or non-conformities. Strong written and verbal communication skills for reporting findings and collaborating with cross-functional teams. Ability to work independently in a fast-paced environment with tight deadlines. Familiarity with quality control standards, procedures, and methodologies. Preferred: Certification from the American Society for Quality (ASQ) such as Certified Quality Inspector (CQI) or Certified Quality Technician (CQT). Prior experience in shipbuilding, manufacturing, or materials inspection highly desirable. Previous Non-Destructive Testing (NDT) experience is a plus.

**5K Sign-on bonus** Americas** Headquartered in Greensboro, NC, with facilities in Lake City, FL, HAECO Americas is a global, world-class aviation company providing services ranging from aircraft maintenance, repair, and overhaul to the manufacturing of aircraft interior products. HAECO Americas is one of the leading aviation corporations in the world. We pride ourselves on safe, high-quality aviation products and services for our customers, as well as security and growth for our most valuable asset -- our people. **Why HAECO Americas** A career with HAECO Americas is your chance to connect with a world leader in aircraft maintenance and interiors. Your career at HAECO will expose you to the best practices of aircraft maintenance on Boeing and Airbus wide-body and narrow-body jets for major airlines and operators. As a HAECO team member, you will learn from the industry's best, pick up new skills, and continue your professional development. We offer a flexible, high-energy work environment with opportunities to innovate, learn and grow - doing work that matters. The sky is the limit on how far your potential could take you at HAECO Americas. HAECO Americas offers an array of benefits designed with the health and welfare of our employees in mind. + Comprehensive Benefit Plans + Health Savings Account + Career Progression Program + Paid Premiums for Certifications/Shifts + Paid Time Off + Employee Discounts + Relocation Assistance (if applicable) + 401k Savings Plan + Employee Assistance Program + Certification Assistance and Tuition Reimbursements + Collaborative and Safe Work Environment **Position Overview** Perform visual and functional inspections of aircraft and components during all phases of maintenance as assigned by Inspection Management. + Inspecting aircraft and components in accordance with instructions for continued airworthiness, reviewing inspection requirements scope and detail, completing visual and mechanical inspections of assigned aircraft areas. + Ensuring all assigned inspections are properly completed in compliance with established policies and procedures and corresponding inspection records, reports, and forms are properly executed prior to releasing products for return to service. + Identifying defects on aircraft systems operations, including but not limited to, engine performance, pneumatic / hydraulics, pressurization, air conditioning, electrical, fuel, and flight controls. Identifying location of discrepancies by using fuselage body stations and butt lines. Interpreting and ensuring compliance with applicable instructions for continued airworthiness. + Inspecting and evaluating work performed by Maintenance Technician ensuring compliance with applicable technical data. + Ensuring safety procedures are followed and potential damage to customer or company property is minimized by overseeing aircraft handling activities, including but not limited to, jacking, fueling, defueling, and towing. + Performing receiving inspection functions for new and continued service parts for serviceability, including but not limited to, verifying part certification, and inspecting for shipping damage and obvious defects. + Performing weight and balance operations using instructions for continued airworthiness and designated equipment. + Ensuring completion of logbook entries and releasing the aircraft for test flight or in-flight operations checks. + Ensure compliance with all applicable FARs, policies, and procedures during day-to-day assignments. + Perform inspections only on products for which they have been properly trained and qualified. + Ensure aircraft and surrounding areas are in a safe condition for the work being performed. + Being authorized to act on behalf of the repair station. + Perform additional duties as may be assigned by the Inspection Lead and Inspection Manager. **What you need: (Requirements)** + High School Diploma or equivalent. + FAA Airframe and Powerplant certificate. + Thorough understanding of FAA 14 CFR parts 21, , 43, 121, 125 and 145. + Five (5) or more years of experience as a technician and/or inspector in a commercial aircraft environment, or previous demonstrated competency with HAECO. (Up to four (4) years Military Aviation may be applied if experience was on transport category type aircraft). + Language (read, write, speak, and understand English). + Subject to noises more than 85 dbs. + Must be able to bend, stoop, kneel, and stand for prolong periods of time, and climb steps, ladders and/or service stands. + Visual acuity must be a minimum of 20/40 corrected and must have full color vision. + Job requires participation in the DOT random drug and alcohol testing program. **Preferred** + General Familiarization Courses. **_"This company considers all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status."_** **Job Details** **Job Family** **Direct** **Job Function** **Inspectors** **Pay Type** **Hourly** All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status.

Road & Rail Services Job Title: Railcar Inspector/Prep As part of an award winning team in the logistics industry, you will perform the essential cleaning and inspection functions necessary to prepare railcars for transport. Areas of Responsibility: comply with all industry, customer and company safety regulations and operating procedures Inspect and assist in opening and closing railcar end doors Inspect railcars for damage/fatigue Identify repairs that can be performed by Road & Rail Services Through the use of backpack blowers and various scraping devices remove all debris and other contaminates which could potentially cause vehicle damage Maintain accountability and maintenance for all assigned equipment Perform housekeeping duties as required by Management What's Required: High School Diploma/GED or Ability Safety first mentality Ability to work in fast paced environment Able to meet attendance requirements A team work, can do attitude and willing to learn Ability to work in all weather Valid state driver's license We appreciate and encourage our associates to share their ideas and help shape our future. We want our associates to play a key role in growing our business. With our locations across North America, there are opportunities to grow with our Company. Apply Now! We Offer: A Full Benefits package including Medical, Dental, 401K Paid Holidays and Vacations An annual Steel Toe Boot allowance All Personal Protective Equipment (PPE) provided Veteran Friendly A promote from within mentality and much more! Company Overview Established in 1987, Road & Rail Services has grown and diversified to become a leading provider of rail-related services in North America. Our network of skilled associates provides plant and terminal operating expertise as well as field maintenance of rail assets for railroads, rail shippers, and owners of rail related equipment and facilities.

Are you looking to join a dynamic team that provides its people with the tools to be successfull and opportunities to grow? Universal Logistics is a leading provider of customized transportation and logistics solutions, offering a comprehensive suite of services including transportation, value-added, intermodal, and specialized services utilized throughout entire supply chains. Universal has immediate career opportunities in your area. Apply today to become part of the Universal team! Depot Gate Inspector Parsec, LLC - Hazel Crest, IL Job description Parsec, LLC is a leading provider of contract intermodal terminal management services in the United States and Canada. Since our beginning in 1949, we have built an integrated network consisting of the industry's most qualified people, state-of-the-art equipment, and comprehensive resources. We focus every day to be an efficient leader in the transportation industry, while servicing our customers and our people with the utmost respect and integrity. Gate Inspector Pay Rate- $20.00 hourly (DOE) SUMMARY: Efficiently and accurately coordinates the movement of trucks and containers in and out of the facility while inspecting trailers, chassis, and containers for any type of damage. Watch our Parsec, Inc.- Team Member Interviews: ******************************************* Benefits: Medical (3 plan options) Dental & Vision 401(k) Paid Weekly Paid Time Off (Vacation & Sick Days - after probationary period) Amazing Opportunity for Growth Responsibilities: Gate Inspector Performs inspections chassis entering or leaving the yard gate using a hand-held device Mark & input the issues found of the chassis Weekly Yard Inventory Check Direct Drivers Chassis Lots Performs work in accordance with established safety & quality management procedures Operate Yard Hostler & Forklift Other duties as assigned Requirements Strong customer service skills Computer Literate Attention to detail Ability to follow directions Ability to work in an outside environment in all weather conditions year round Qualifications: Previous experience as a gate clerk or in a similar role within the intermodal rail or logistic industry is preferred Valid driver's license High school diploma or equivalent Excellent communication and interpersonal skills Strong attention to detail and accuracy in data entry and recordkeeping Ability to multitask and prioritize tasks effectively in a fast-paced environment Proficiency in using computer systems and data entry software Basic knowledge of transportation and logistics operations Familiarity with relevant safety and security regulations Ability to work independently as well as in a team environment Competencies: Problem Solving--Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics. Customer Service--Manages difficult or emotional customer situations; Responds promptly to customer needs; Solicits customer feedback to improve service; Responds to requests for service and assistance; Meets commitments. Interpersonal Skills--Focuses on solving conflict, not blaming; Maintains confidentiality; Listens to others without interrupting; Keeps emotions under control; Remains open to others' ideas and tries new things. Oral Communication--Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings. Parsec is an equal opportunity employer and does not discriminate against applicants or employees on the basis of race, color, religion, gender including pregnancy, childbirth, or related medical conditions), genetic information, national origin, ancestry, age, physical or mental disability, legally protected medical conditions, family care status, veteran status, sexual orientation, or any other basis protected by local, state or federal laws.

Are you looking to join a dynamic team that provides its people with the tools to be successfull and opportunities to grow? Universal Logistics is a leading provider of customized transportation and logistics solutions, offering a comprehensive suite of services including transportation, value-added, intermodal, and specialized services utilized throughout entire supply chains. Universal has immediate career opportunities in your area. Apply today to become part of the Universal team! Parsec, LLC. is a leading provider of contract intermodal terminal management services throughout North America. Since our beginning in 1949, we have built an integrated network consisting of the industry's most qualified people, state-of-the-art equipment, and comprehensive resources. We focus every day on being the most efficient leader in the transportation industry, while serving our customers and people with the utmost respect and integrity. Gate InspectorDolton, ILPay Rate- $20 hourly Shifts Available:6:00 AM to 6:30 PMor6:00 PM to 6:30 AMJob Summary: The Gate Inspector is responsible for efficiently and accurately coordinating the movement of trucks and containers in and out of the facility while inspecting trailers, chassis, and containers for any type of damage. This role requires excellent communication skills, attention to detail, and the ability to work in a fast-paced environment. Exceptional Medical, Dental & Vision Insurance 401(k) Company paid life insurance. Voluntary Benefits Paid Weekly Paid Time Off (After probationary period) Opportunity for growth Key Responsibilities: Gate Operations: - Greet and direct incoming and outgoing trucks, verifying necessary documentation and ensuring compliance with terminal rules and regulations. - Accurately record and update truck and container information in the terminal's computer system. - Issue gate passes, permits, and other required documentation to authorized personnel. - Coordinate with security personnel to ensure the safety and security of the terminal premises.Documentation and Recordkeeping: - Collect and review shipping documents, such as bills of lading, delivery orders, and customs paperwork, to ensure accuracy and completeness. - Enter data from shipping documents into the terminal's computer system accurately and efficiently. - Maintain organized and up-to-date records of truck and container movements, permits, and other relevant documentation. - Generate reports on gate activities, truck turn times, and any other requested metrics.Communication and Coordination: - Communicate effectively with truck drivers, customers, and other terminal personnel to facilitate smooth and efficient operations. - Coordinate with yard personnel to ensure the availability and proper placement of containers for loading and unloading. - Collaborate with customer service representatives to address customer inquiries, resolve issues, and provide timely updates. - Assist in coordinating with external stakeholders, including rail carriers, trucking companies, and regulatory authorities.Safety and Compliance: - Enforce safety protocols and regulations within the gate area, ensuring compliance by all personnel and visitors. - Monitor and report any security concerns, damages, or safety hazards to the appropriate personnel. - Stay updated on industry regulations and best practices related to intermodal rail terminal operations. - Assist in conducting safety and security training for terminal staff and contractors, as required.Customer Service: - Provide exceptional customer service to truck drivers, ensuring a positive experience during their interactions with the terminal. - Address and resolve customer concerns or complaints promptly and professionally. - Assist customers in locating containers and providing necessary information or assistance.Qualifications and Skills:- Valid Driver's license- High School Diploma or equivalent - Previous experience as a gate clerk or in a similar role within the intermodal rail or logistics industry is preferred. - Excellent communication and interpersonal skills. - Strong attention to detail and accuracy in data entry and recordkeeping. - Ability to multitask and prioritize tasks effectively in a fast-paced environment. - Proficiency in using computer systems and data entry software. - Basic knowledge of transportation and logistics operations. - Familiarity with relevant safety and security regulations. - Ability to work independently as well as in a team environment.Note: This job description provides a general overview of the responsibilities and qualifications typically associated with the Gate Inspector role at Parsec LLC. Actual job duties may vary based on the specific needs of the company and location. Parsec is an equal opportunity employer and does not discriminate against applicants or employees on the basis of race, color, religion, gender including pregnancy, childbirth, or related medical conditions), genetic information, national origin, ancestry, age, physical or mental disability, legally protected medical conditions, family care status, veteran status, sexual orientation, or any other basis protected by local, state or federal laws.