Welder jobs at Volvo Trucks

Inside the Role Inside the Role Perform physically demanding manufacturing duties including repetitive processes, moderate to heavy lifting, the use of machinery and following standardized work procedures at workstation or line assembly operations to mass-produce bus components or to assemble those components into a completed bus. Welder- Utility employees can perform tasks conducted by a specified area in a department or designated department. They participate in the assembly process and can rotate through all or most of them, rather than being assigned to a specific task on a permanent basis. Posting Information We provide a scheduled posting end date to assist our candidates with their application planning. While this date reflects our latest plans, it is subject to change, and postings may be extended or removed earlier than expected. We Take Care of Our Team We Take Care of Our Team This position offers top pay up to $33.78/hr. Additional 7.5% Shift Differential for Second and Third Shift Pay offered depends on knowledge, skills, and experience Benefits include; 401k with company match, retirement pension, full coverage benefit plan options, paid vacation (up to 5 weeks), 15 calendar holidays, paid sick/disability leave (including sick days) employee assistance program; comprehensive health and wellness programs (including no cost wellness clinic for employee and covered dependents), and tuition assistance What You Drive at DTNA Help production workers by performing duties when necessary Use hand tools, adhesive dispensing equipment, forming machines, fixtures and/or end effectors to complete mechanical, electrical and structural assemblies and sub-assemblies on buses. Install and assemble components for buses, use computer systems to access company data associated with assembly process, utilize drawings, bills of materials and specification sheets in both electronic and hard copy Complete tasks as directed by manufacturing schedules with minimum supervision Work in a LEAN manufacturing environment and employ continuous improvement daily. Kitting of products, material and supplies Weld components in flat, vertical, or overhead positions. Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. Check specifications of materials loaded or unloaded against information contained in work orders. Inform designated employees or departments of loaded items, and problems encountered. Inventory supplies, and requisition or purchase additional items as necessary. Clamp, hold, tack-weld, heat-bend, grind and/or bolt component parts to obtain required configurations and positions for welding. Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding. Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material. Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications. Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment. Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. Inform designated employees or departments of loaded items, and problems encountered. Knowledge You Should Bring Previous work-related skills, knowledge, or experience may be required Requires a high school diploma or equivalent Attached resume required Ability to work in a fast-paced, highly disciplined work area Ability to wear all PPE throughout the day Ability to collaborate with a team and work independently Must be able to operate air tools continuously Focused on safety in all situations Knowledge of design techniques, tools, and principals involved in production of precision technical plans, blueprints, drawings, and models. The ability to keep hand and arm steady while moving one arm or while holding one arm and hand in one position. The ability to see details at close range (within a few feet of the observer). The ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positions. Obtaining and seeing to the appropriate use of equipment, facilities, and materials needed to do certain work. Knowledge of machines and tools, including their designs, uses, repair, and maintenance. Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. Exceptional Candidates Might Have Associate's degree in related field Some vocational training or job-related course work is preferred Certified Welder Diploma a plus Current electrician's license or identification card to meet governmental regulations. Experience in a manufacturing environment is preferred Where We Work This position is open to applicants who can work in (or relocate to) the following location(s)- High Point, NC US. Relocation assistance is not available for this position. Schedule Type: Onsite At Daimler Truck North America, we recognize our world is changing faster than ever before. By listening to the needs of today, we're building to solve with cutting-edge solutions in sustainability and future driving technology across electric, hydrogen and autonomous. These solutions, backed by years of innovative success and achievement, continue DTNA's legacy as the undisputed industry leader. Our evolving brand portfolio is second to none, including Freightliner Trucks, Western Star, Demand Detroit, Thomas Built Buses, Freightliner Custom Chassis, and Financial Services. Together, we work as one team towards our envisioned future - building a cleaner, safer and more efficient tomorrow for all. That is what we are working toward - for all who keep the world moving. Additional Information This position is not open for Visa sponsorship or to existing Visa holders Applicants must be legally authorized to work permanently in the country the position is located in at the time of application Final candidate must successfully complete a criminal background check Final candidate may be required to successfully complete a pre-employment drug screen Contractors, professional services, or other contingent workers should confirm with their local agency if they are eligible to apply for FTE positions EEO - Disabled/Veterans Daimler Truck North America is committed to workforce inclusion and providing an environment where equal employment opportunities are available to all applicants and employees without regard to race, color, sex (including pregnancy), religion, national origin, age, marital status, family relationship, disability, sexual orientation, gender identity and expression (including transgender and transitioning status), genetic information, or veteran status. For an accommodation or special assistance with applying for a posted position, please contact our Human Resources department at ************ or toll free ************. For TTY/TDD enabled call ************ or toll free ************.

About JLG, an Oshkosh company JLG began in 1969, when our founder, John L. Grove set out to resolve growing safety concerns in the construction industry. Since then we have been committed to understanding the challenges and delivering innovative solutions to the access market. We partner with customers to provide quality equipment, training opportunities and trusted support within the access industry. We are a global company, and our products-including mobile elevating work platforms, telehandlers, utility vehicles and accessories-can be found all over the world. This position is responsible for operating welding equipment to build high quality parts, subassemblies, and finished product. Weldments vary in type, size, and direction and are performed on a variety of production lines. ESSENTIAL DUTIES AND RESPONSIBILITIES: * Adjust welding machine settings to proper weld configurations * Use tools such as grinders, needle guns, wire wheels, etc. for cleanliness of finished welds * Heats and forms metal parts and components using hand tools, torch, or welding equipment * Welds components in flat, horizontal, vertical or overhead positions * Accurately operate and read measuring devices * Assemble and weld various metal parts together * Properly position material/parts to be welded * Train and work in various areas of production in response to production demands * Follow verbal and written work instructions including ability to read blueprints * Attention to detail necessary to adhere to quality standards * Maintain a safe and clean work environment in compliance with safety procedures, rules, and proper 6S standards * Work in both team and individual settings * Regular attendance required * All other duties and responsibilities that are assigned MINIMUM QUALIFICATIONS: * Must receive a passing score on the Welder Qualification test and recertify skills as required by program guidelines * Must have completed a weld class / curriculum Oshkosh is committed to working with and offering reasonable accommodations to job applicants with disabilities. If you need assistance or an accommodation due to a disability for any part of the recruitment process, please contact our talent acquisition team at ******************************************. Oshkosh Corporation is a merit-based Equal Opportunity Employer. Job opportunities are open for application to all qualified individuals and selection decisions are made without regard to race, color, religion, sex, national origin, age, disability, veteran status, or other protected characteristic. To the extent that information is provided or collected regarding categories as provided by law it will in no way affect the decision regarding an employment application. Oshkosh Corporation will not discharge or in any manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with Oshkosh Corporation's legal duty to furnish information. Certain positions with Oshkosh Corporation require access to controlled goods and technologies subject to the International Traffic in Arms Regulations or the Export Administration Regulations. Applicants for these positions may need to be "U.S. Persons," as defined in these regulations. Generally, a "U.S. Person" is a U.S. citizen, lawful permanent resident, or an individual who has been admitted as a refugee or granted asylum.

About JLG, an Oshkosh company JLG began in 1969, when our founder, John L. Grove set out to resolve growing safety concerns in the construction industry. Since then we have been committed to understanding the challenges and delivering innovative solutions to the access market. We partner with customers to provide quality equipment, training opportunities and trusted support within the access industry. We are a global company, and our products-including mobile elevating work platforms, telehandlers, utility vehicles and accessories-can be found all over the world. This position is responsible for operating welding equipment to build high quality parts, subassemblies, and finished product. Weldments vary in type, size, and direction and are performed on a variety of production lines. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Adjust welding machine settings to proper weld configurations • Use tools such as grinders, needle guns, wire wheels, etc. for cleanliness of finished welds • Heats and forms metal parts and components using hand tools, torch, or welding equipment • Welds components in flat, horizontal, vertical or overhead positions • Accurately operate and read measuring devices • Assemble and weld various metal parts together • Properly position material/parts to be welded • Train and work in various areas of production in response to production demands • Follow verbal and written work instructions including ability to read blueprints • Attention to detail necessary to adhere to quality standards • Maintain a safe and clean work environment in compliance with safety procedures, rules, and proper 6S standards • Work in both team and individual settings • Regular attendance required • All other duties and responsibilities that are assigned MINIMUM QUALIFICATIONS: • Must receive a passing score on the Welder Qualification test and recertify skills as required by program guidelines • Must have completed a weld class / curriculum Oshkosh is committed to working with and offering reasonable accommodations to job applicants with disabilities. If you need assistance or an accommodation due to a disability for any part of the recruitment process, please contact our talent acquisition team at ******************************************. Oshkosh Corporation is a merit-based Equal Opportunity Employer. Job opportunities are open for application to all qualified individuals and selection decisions are made without regard to race, color, religion, sex, national origin, age, disability, veteran status, or other protected characteristic. To the extent that information is provided or collected regarding categories as provided by law it will in no way affect the decision regarding an employment application. Oshkosh Corporation will not discharge or in any manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with Oshkosh Corporation's legal duty to furnish information. Certain positions with Oshkosh Corporation require access to controlled goods and technologies subject to the International Traffic in Arms Regulations or the Export Administration Regulations. Applicants for these positions may need to be "U.S. Persons," as defined in these regulations. Generally, a "U.S. Person" is a U.S. citizen, lawful permanent resident, or an individual who has been admitted as a refugee or granted asylum.

About JLG, an Oshkosh company JLG began in 1969, when our founder, John L. Grove set out to resolve growing safety concerns in the construction industry. Since then we have been committed to understanding the challenges and delivering innovative solutions to the access market. We partner with customers to provide quality equipment, training opportunities and trusted support within the access industry. We are a global company, and our products-including mobile elevating work platforms, telehandlers, utility vehicles and accessories-can be found all over the world. This position is responsible for operating welding equipment to build high quality parts, subassemblies, and finished product. Weldments vary in type, size, and direction and are performed on a variety of production lines. ESSENTIAL DUTIES AND RESPONSIBILITIES: * Adjust welding machine settings to proper weld configurations * Use tools such as grinders, needle guns, wire wheels, etc. for cleanliness of finished welds * Heats and forms metal parts and components using hand tools, torch, or welding equipment * Welds components in flat, horizontal, vertical or overhead positions * Accurately operate and read measuring devices * Assemble and weld various metal parts together * Properly position material/parts to be welded * Train and work in various areas of production in response to production demands * Follow verbal and written work instructions including ability to read blueprints * Attention to detail necessary to adhere to quality standards * Maintain a safe and clean work environment in compliance with safety procedures, rules, and proper 6S standards * Work in both team and individual settings * Regular attendance required * All other duties and responsibilities that are assigned MINIMUM QUALIFICATIONS: * Must receive a passing score on the Welder Qualification test and recertify skills as required by program guidelines * Must have completed a weld class / curriculum Oshkosh is committed to working with and offering reasonable accommodations to job applicants with disabilities. If you need assistance or an accommodation due to a disability for any part of the recruitment process, please contact our talent acquisition team at ******************************************. Oshkosh Corporation is a merit-based Equal Opportunity Employer. Job opportunities are open for application to all qualified individuals and selection decisions are made without regard to race, color, religion, sex, national origin, age, disability, veteran status, or other protected characteristic. To the extent that information is provided or collected regarding categories as provided by law it will in no way affect the decision regarding an employment application. Oshkosh Corporation will not discharge or in any manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with Oshkosh Corporation's legal duty to furnish information. Certain positions with Oshkosh Corporation require access to controlled goods and technologies subject to the International Traffic in Arms Regulations or the Export Administration Regulations. Applicants for these positions may need to be "U.S. Persons," as defined in these regulations. Generally, a "U.S. Person" is a U.S. citizen, lawful permanent resident, or an individual who has been admitted as a refugee or granted asylum.

Job Purpose Responsible for MIG & TIG welding. Accountable for all results. Duties & Responsibilities Safety Ensure safe workplace and follow all safety rules Wear all required personal protective equipment (gloves, masks, shoes, etc.) Report all accidents & any safety issues to Supervisor or Safety manager Quality Follow all SOP's & quality standards, maintain Welding Procedure Specifications Inspects & tests weld structure & surfaces to discover flaws Inspect parts, secure 2 nd verification, verify dimensions, etc., per work order Verify material type, gauge & size Detect & report defective materials to Supervisor Manufacture parts per Router / work instruction requirements Report all required information & report router discrepancies Training Participate in relevant training activities Work with Supervisor, leader, mentor to learn Pulverman processes & procedures Productivity Report productivity (setup & run) accurately Report good material & scrap accurately Work with Supervision to implement productivity improvements (daily) Work with Supervision to implement setup reduction strategies Equipment Set up welding machines to ensure optimal performance Monitors equipment to ensure proper settings Report all maintenance issues and work to resolve Maintain equipment & conduct required Operator preventative maintenance Communication Provide feedback to Management team for ideas & improvements Express ideas & thoughts verbally in a positive & productive manner Exhibit good communication, listening & comprehension skills Workflow Execute work plan per schedule Work Expectations Set up welding machines MIG & TIG weld steel, aluminum & stainless based upon specifications Join & fabricate components to customer requirements De-bur & grind metal to achieve proper surface texture Read & interpret blueprints & drawings to layout jobs Pay close attention to detail & focus on job at hand Cooperate, support co-workers and be a strong team player Be reliable and adhere to attendance policy Maintain organization and housekeeping Perform other duties as requested Create Excellence Everyday Physical Requirements Lift, carry, push or pull frequently Squat / kneel, bend, crawl, twist/turn, grasp and reach overhead & outward Sit, stand and walk Ability to work in hot & cold work environment Qualifications High School Education or higher Able to read & interpret customer drawings Proficient using measuring tools Exceptional interpersonal skills

Forest River, Inc., the Nation's largest manufacturer of Recreational Vehicles, Cargo Trailers, Transit Buses and Boats has an immediate opening. Essential Duties and Responsibilities: * Candidates should have at least 1 year of MIG welding experience. * Must feel comfortable attending a MIG welding test on-site at the facility. * Mechanically inclined and skilled with hand, air, and power tools. * Must be proficient in work. * Must be detail oriented and be very meticulous about you work. * Perform as a team member which requires the ability to learn, perform and rotate to other workstations. * Perform the above within acceptable quality, quantity, performance, and safety standards. Additional Duties and Responsibilities: * Obtain supplies and parts required to do the job. * Assist other employees when assembly work is not required. * Clean department and maintain neatness in the surrounding work areas. Skills/Qualifications: * Must have passed or be able to pass Print Reading and MTE. * Must have a general or working knowledge, average skill, and some experience with ordinary and semi-complex equipment to be operated. * Must be able to do minor weld and rotator machine adjustments, change weld wire, change weld tip, change gas, read, and interpret work orders, read blueprints, use full scale drawings. * Must have knowledge of inspection tool use. * Must have a working knowledge of common, easy to recognize materials. * Must be able to constantly sustain an exertion and lifting of parts up to 25 lbs. * Ability to occasional lift tooling components weighing 10 to 75 lbs. * Continuous mental and visual attention and alertness is required. Additional Skills/Qualifications: * Solid work history with interest in pursuing a long-term full-time placement with a growing company. * Ability to use ladders, enter and exit vehicles, reaching, bending, twisting, squatting, working below knees or above shoulders. * Ability to use air and electrically powered tools such as drills, hammer drills, torque wrenches (powered or non-powered), air tools. * Ability to read and understand work orders, directions, charts, forms, and safety regulations. * Ability to correctly use and read various gauges. * Ability to work well with other employees in a team environment. * Ability to read a tape measure to a sixteenth (1/16) of an inch. * Must have strong problem-solving skills. * Must be able to work in a strong team environment. Forest River offers a stable work environment that is fast paced. Our employees enjoy a highly competitive Wage and Benefit Package. We are looking for dedicated individuals with experience in the Industry as well as other Manufacturing Processes.

Safe Fleet a leader in the truck equipment manufacturing industry, is looking for an Fabricator/Welder to work as part of a team fabricating, installing and repairing Automated Tarp Systems. We are looking for a mechanical Fabricator/Welder. This full-time position is responsible for on premises tarp system fabricating, repair and installation for the trucking industry. The qualified candidate must be a high energy, physical individual with experience working on triaxle truck bodies and semi-trailers in a fast paced, labor intensive environment. This individual will need to be motivated by a competitive industry and be results, detail and team-oriented. ESSENTIAL DUTIES AND RESPONSIBILITIES: Fabricates steel and other metal parts as indicated by the work order and blueprints. Maneuver fabrication machines, such as grinders, drill presses, brakes, rolls, shears, and flame cutters to cut, grind, and adjust material. Sets up and operates gas welding machines to weld metal parts according to work orders, blueprint layouts and verbal instructions. Regulates flow of gases for proper mixture. Cleans parts to remove contamination prior to welding Set up and operates all phases of brazing applications using clamps, fixtures and torches working to specified tolerances. Selects proper flux Sets up and operates stick welding machines to repair, join or fabricate parts working with blueprints, sketches or verbal instructions. Read a tape measure, use hand tools and semi automatic manufacturing equipment. COMPETENCIES: Must be detail oriented and eager to work Must be able to balance numerous tasks with efficiency tolerance for stress and resiliency Flexibility while having a respect for adherence to processes Quick and accurate thinker...problem solver with a sense of urgency Mechanical aptitude QUALIFICATIONS: Manual dexterity Able to learn on the fly Demonstrated ability to work professionally and productively with peers on production floor EDUCATION AND/OR EXPERIENCE: High school education or equivalent 1 year of welding experience preferred Certification preferred but not required PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, and depth perception. While performing the duties of this job, the employee is regularly required to use hands and reach with hands and arms. The employee is frequently required to stand; walk; stoop, kneel, crouch, bend, or twist, and talk or hear. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to work near moving mechanical parts. Working environment is a climate-controlled manufacturing/warehouse facility. The employee is occasionally exposed to fumes or airborne particles. The noise level in the work environment is occasionally loud. At Safe Fleet, you are empowered to build a career that will take you where you want to go. You'll enjoy the freedom to explore new projects, the support to think outside the box and the tools necessary to achieve personal success. We offer a comprehensive compensation package, including Medical, Dental, Vision, Paid Holidays, 401K match and much more. We're a background check and pre-hire drug screen company where allowed by law. NOTE: Safe Fleet does not discriminate in hiring or employment on the basis of race, color, religion, gender, marital status, national origin, sexual orientation, age, disability, ancestry veteran status or any other status protected by law.

Meet the Smart Safety Company At Safe Fleet our name says it all. We make fleet vehicles - and everyone in and around them - safer. Our fleet safety platform brings together best-in-class products, ground-breaking technology, and a 100-year history of fleet know-how and innovation to solve the world's biggest fleet safety problems. We are re-defining what safety means for fleets of every type - from school buses to waste collection trucks, firefighting to utility vehicles, police cruisers to delivery vans. We are a fast-growing manufacturing, service, and technology company with over 1700 employees in over 15 locations across Canada and the US. We're looking for motivated self-starters with innovative thinking to join our team and help us achieve our growth and performance goals. Sound like you? Work for the Smart Safety Company Safe Fleet is seeking experienced Welders for 1st and 2nd Shift! Hours: compressed 10-hr work schedule 1st: Monday - Thursday 6:00 am - 4:30 pm, possible overtime on Fridays 2nd: Monday - Thursday 3:30 pm - 2:00 am, possible overtime on Fridays (+$1.50/hour Shift diff) Location: Belton, Missouri Essential Duties and Responsibilities: Welding of galvanized, carbon steel and aluminum materials and assemblies Plasma and stitch cutting Weld Platforms and pennant plates as needed Prepare assemblies for shipping Preform inspections of own work Maintain Kan Ban Levels Other duties as assigned Education, Experience and Qualifications: High School Diploma/Equivalent 6 months of hands-on experience in a manufacturing facility, small part assembly preferred. Ability to work overtime and weekends, as needed. Reliable and dependable attendance. Mig/Tig wire feed welding skills; Experience in Aluminum welding and Robotics strongly preferred Ability to communicate verbally and in written form with supervisors and co-workers Mechanical aptitude preferred. Physical requirements include frequent reaching, gripping and carrying up to 50 lbs., plus frequent standing, stooping, bending, squatting, and walking. Working environment is an unheated and non air conditioned manufacturing/warehouse setting. Safety glasses with side shields are required in the manufacturing environment. Frequent reaching, gripping and carrying up to 50 lbs., plus standing, stooping, bending, stretching, squatting and walking. Must handle multiple tasks and perform effectively in a fast paced, high stress work environment. Must have or be able to obtain certification by CWI Ability to pass a pulmonary function test At Safe Fleet, you are empowered to build a career that will take you where you want to go. You'll enjoy the freedom to explore new projects, the support to think outside the box and the tools necessary to achieve personal success. We offer a comprehensive compensation package, including Medical, Dental, 401K and so much more. We're a background check and pre-hire drug screen company where allowed by law. NOTE: Safe Fleet does not discriminate in hiring or employment on the basis of race, color, religion, gender, marital status, national origin, sexual orientation, age, disability, ancestry veteran status or any other status protected by law. High School Diploma or Equivalent

Welder - Fabricator Trailers Hale Trailer Brake & Wheel, Inc. is a full-service trailer dealership with an immediate opening at its Baltimore, MD location. We are looking for an experienced welder and fabricator to join our team of trailer repair professionals. This is a great career opportunity if you enjoy a dynamic, fast-paced work environment, offering a variety of welding repairs and fabrication work. The Company offers competitive compensation and excellent medical, vision & dental benefits, paid holidays and vacation, life insurance, short- and long-term disability, and a matching 401k plan. In addition, the company provides uniforms, and service awards Responsibilities: Perform welding repairs on various metals, both new and used materials. All repairs would be expected to be made in an efficient, accurate, professional, and safe manner in accordance with all Company polices DOT, OSHA and other governmental standards and regulations. Requirements: Prefer a candidate who has two (2) years technical training in metal technology, welding, fabrication or welder certification is desirable. Must be able to use a break and shear to bend steel components. Must be able to use a plasma cutter or torch to cut metal. Must be experienced with MIG and TIG welding in carbon steel, stainless, and aluminum Must be able to produce after-market parts, involving metal cutting and welding. Must have a valid driver license Must adhere to all Company policies including safety policies. Must pass a standard pre-employment drug test. Must present a professional, highly motivated, positive, result-oriented, problem-solving attitude. Must have good communication skills. Must pass a standard pre-employment drug test and physical.

Job Description RealTruck is the premier manufacturer and digital destination of accessories for truck, Jeep , Bronco and off-road enthusiasts around the world. Real Truck's 5,000+ associates operate from 72 facilities across four continents. ARE is the company behind all your favorite fiberglass, aluminum, and tonneau covers and truck caps. You can be a part of making an awesome product! Core Functions: Perform MIG & TIG welding on products. Perform cosmetic welding on products. Must be able to meet daily productivity and output goals (production outputs are measured hourly/daily). Set up components for welding according to specifications, work orders and/or prints. Weld components using manual or semi-automatic welding equipment in various positions (vertical/ horizontal). Repair product and other components by welding pieces and filling gaps. Test and inspect welded surfaces and structure to discover flaws. Maintain equipment in a condition that does not compromise safety. Cut aluminum to specifications. Reasons you'll love the RealTruck family: Pay starting at $21.75/hr. Opportunities available with an immediate start date. Work a set, full-time schedule schedule. Every weekend off! Orientation & training is paid. Enjoy weekly pay that is direct deposited! Reimbursement available for advanced learning opportunities through skilled trades programs! We are fast-growing, stable company that invests in their employees and company. This is not a job, but a career that you can retire from. Employee engagement - Referral bonuses, holiday parties, town halls, listening sessions, and more! Education and Experience: High School Diploma or equivalent preferred. Ability to use a tape measure and calculate fractions. What's next? Please take a moment to complete our online application. Check us out at ******************** About RealTruck RealTruck is the premier manufacturer and digital destination of accessories for truck, Jeep , Bronco and off-road enthusiasts around the world. Globally headquartered in Ann Arbor, Michigan, RealTruck's 6,000+ associates operate from 35+ facilities across four continents. RealTruck's industry leading product portfolio, which includes the Husky Liners total vehicle protection brand, boasts over 1,000 patents and pending applications. The company's omni-channel retail approach delivers a seamless consumer experience online at RealTruck.com, as well as through its 12,000+ dealer network and automotive (OEM) partnerships.

Job Description RealTruck is the premier manufacturer and digital destination of accessories for truck, Jeep , Bronco and off-road enthusiasts around the world. Real Truck's 5,000+ associates operate from 72 facilities across four continents. ARE is the company behind all your favorite fiberglass, aluminum, and tonneau covers and truck caps. You can be a part of making an awesome product! Core Functions: Perform MIG & TIG welding on products. Perform cosmetic welding on products. Must be able to meet daily productivity and output goals (production outputs are measured hourly/daily). Set up components for welding according to specifications, work orders and/or prints. Weld components using manual or semi-automatic welding equipment in various positions (vertical/ horizontal). Repair product and other components by welding pieces and filling gaps. Test and inspect welded surfaces and structure to discover flaws. Maintain equipment in a condition that does not compromise safety. Cut aluminum to specifications. Reasons you'll love the RealTruck family: Pay starting at $21.75/hr. Opportunities available with an immediate start date. Work a set, full-time schedule schedule. Every weekend off! Orientation & training is paid. Enjoy weekly pay that is direct deposited! Reimbursement available for advanced learning opportunities through skilled trades programs! We are fast-growing, stable company that invests in their employees and company. This is not a job, but a career that you can retire from. Employee engagement - Referral bonuses, holiday parties, town halls, listening sessions, and more! Education and Experience: High School Diploma or equivalent preferred. Ability to use a tape measure and calculate fractions. What's next? Please take a moment to complete our online application. Check us out at ******************** About RealTruck RealTruck is the premier manufacturer and digital destination of accessories for truck, Jeep , Bronco and off-road enthusiasts around the world. Globally headquartered in Ann Arbor, Michigan, RealTruck's 6,000+ associates operate from 35+ facilities across four continents. RealTruck's industry leading product portfolio, which includes the Husky Liners total vehicle protection brand, boasts over 1,000 patents and pending applications. The company's omni-channel retail approach delivers a seamless consumer experience online at RealTruck.com, as well as through its 12,000+ dealer network and automotive (OEM) partnerships.

$19-$21 per hour to start (plus $2 shift differential) 2nd Shift Monday- Thursday 5:00 PM to 5:30 AM Overtime on Friday and Saturday as needed for production Do you love MIG welding and have a strong work ethic? Apply now to become Mickey Truck Bodies newest 2 nd Shift Small Part Welder and experience Mickey Truck Bodies excellent benefits and supportive company culture in this rewarding role. Mickey Truck Bodies is a premier manufacturer of state-of-the-art bodies and trailers and specially engineered vehicles sold in over 50 countries around the world. The innovative product line-up is prevalent in industries such as food & beverage, vending, propane, rental trucks, emergency & rescue, furniture, battery, oil & natural gas, and data storage. Mickey Truck Bodies offers employees a competitive compensation and benefit package including: Productivity and Performance Bonus Paid Vacation Time Medical, Dental, and Vision Insurance (Employee cost share) Wellness Plan with Incentives Flexible Spending Accounts Company Paid Short and Long-Term Disability Insurance Company Paid Basic Life Insurance with AD&D Policy 401 K with Company Match 2 nd Shift Small Part Welder Summary: The Small Part Welder is responsible for welding and fabricating small metal components used in truck and trailer body assemblies. This role requires precision, attention to detail, and adherence to established safety and quality standards. The welder will operate various welding equipment and fixtures to ensure consistent, high-quality welds that meet production goals. 2 nd Shift Small Part Welder Essential Duties/Responsibilities: Weld and fabricate small metal parts and assemblies according to blueprints, work orders, or verbal instructions. Operate MIG and TIG welding equipment safely and efficiently. Inspect welds for accuracy, completeness, and compliance with quality standards. Use jigs, fixtures, and measuring tools to ensure part alignment and consistency. Perform basic grinding, cutting, and finishing tasks to prepare or clean welded parts. Maintain welding equipment and perform routine checks to ensure proper operation. Identify and report defective materials, faulty equipment, or unsafe conditions to the Team Leader. Work collaboratively with team members to meet production goals and deadlines. Follow all safety policies and wear required PPE at all times. Assist with setup and organization of work area to support continuous improvement and lean manufacturing initiatives. 2 nd shift Small Parts Welder Required Education, Knowledge & Skills: High school diploma or GED required. 1-3 years of welding experience in a manufacturing or fabrication environment preferred. Completion of a welding certification or technical training program strongly preferred. Strong knowledge of MIG and TIG welding techniques. Ability to read and interpret blueprints, drawings, and welding symbols. Familiarity with steel, aluminum, and other common welding materials. Skilled in the use of hand tools, grinders, and measuring instruments. Excellent attention to detail and commitment to producing quality work. Ability to work independently with minimal supervision. Strong work ethic and reliability in attendance and performance. 2nd Shift Small Parts Welder Physical Requirements: Must be able to communicate clearly Requires ability to lift, carry, push, or pull up to 20 lbs. Requires ability to sit, stand, walk, climb, balance, stoop, crawl, and kneel Specific vision ability required includes close, distance, color, and peripheral vision with depth perception and ability to adjust focus. Work Environment: Manufacturing work environment that has frequent exposure to fumes or airborne particles, noise intensity level, proximity to moving mechanical parts and exposure to weather. Mickey Truck Bodies and Subsidiaries is an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law.

Welder - Fabricator Tank Trailer Hale Trailer Brake & Wheel, Inc. is a full-service trailer dealership with an immediate opening at its Allentown, PA location. We are looking for an experienced welder and fabricator to join our team of tank trailer repair professionals. This is a great career opportunity if you enjoy a dynamic, fast-paced work environment, offering a variety of welding repairs and fabrication work. The Company offers competitive compensation and excellent medical, vision & dental benefits, paid holidays and vacation, life insurance, short- and long-term disability, and a matching 401k plan. In addition, the company provides uniforms, and service awards Responsibilities: Perform welding repairs on various metals, both new and used materials. All repairs would be expected to be made in an efficient, accurate, professional, and safe manner in accordance with all Company polices DOT, OSHA and other governmental standards and regulations. Requirements: Prefer a candidate who has two (2) years technical training in metal technology, welding, fabrication or welder certification is desirable. Must be able to use a break and shear to bend steel components. Must be able to use a plasma cutter or torch to cut metal. Must be experienced with MIG and TIG welding in carbon steel, stainless, and aluminum Must be able to produce after-market parts, involving metal cutting and welding. Must have a valid driver license Must adhere to all Company policies including safety policies. Must pass a standard pre-employment drug test. Must present a professional, highly motivated, positive, result-oriented, problem-solving attitude. Must have good communication skills. Must pass a standard pre-employment drug test and physical.

Job Description About Us: At Liberty Tire Recycling, we're building a sustainable future - one tire at a time. As North America's leading tire recycler, we offer a unique opportunity to make a real impact on the environment. Join our team of nearly 4,000 dedicated employees across 70+ sites and help us transform billions of pounds of waste tires into valuable resources. We're committed to innovation, a circular economy, and providing a rewarding workplace where you can grow and thrive. Job Summary: We are seeking a skilled and detail-oriented Welder to join our team. The Welder will be responsible for assembling, fabricating, and repairing metal structures and equipment using welding techniques and tools. This position requires a high level of precision, safety awareness, and the ability to read blueprints and technical drawings. The ideal candidate has experience in various welding methods and industrial maintenance skills and thrives in a fast-paced industrial or manufacturing environment. Duties and Responsibilities: • Interpret and follow blueprints, drawings, and specifications to determine welding requirements. • Perform welding tasks using appropriate techniques such as MIG, TIG, Stick (SMAW), or flux-cored arc welding (FCAW). • Inspect and ensure welds meet structural specifications and quality standards. • Set up and operate welding equipment and tools safely and efficiently. • Fabricate and assemble metal parts by cutting, shaping, and welding components. • Repair broken or cracked parts and rework defective welds as necessary. • Grind, cut, or clean welds and surfaces using power tools. • Follow all company safety protocols and OSHA regulations. • Maintain tools, equipment, and work areas in clean and orderly condition. • Collaborate with supervisors and team members to meet production goals and deadlines. • Perform other duties as assigned. Required Skills/Abilities: • Proficient in MIG, TIG, Stick, and/or flux-core welding. • Ability to read and interpret blueprints, technical drawings, and welding symbols. • Knowledge of metal properties and appropriate welding techniques. • Strong attention to detail with an emphasis on quality and precision. • Ability to use hand and power tools related to welding and metal fabrication. • Good physical condition and stamina; ability to lift 50+ pounds and work in awkward positions. • Strong safety orientation and commitment to maintaining a hazard-free environment. • Ability to work independently and as part of a team in a fast-paced setting. Education and Experience: • High school diploma or equivalent (required). • Completion of a welding certification program or technical training (preferred). • Minimum of 2 years of welding experience in a manufacturing, construction, or industrial setting (highly preferred). • Certification from the American Welding Society (AWS) or equivalent (preferred). EEO Statement: Liberty Tire Recycling is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sex, national origin, age, disability, protected veteran status, relationship or association with a protected veteran (spouses or other family members), genetic information, or any other characteristic protected by applicable law.

Mid-State Metals LLC provides custom fabrication of miscellaneous and architectural metals. Serving the commercial and industrial construction industry, Mid-State Metals has built a solid reputation for managing and completing an array of projects through our commitment to safety and customer service. Mid-State Metals is a true turn-key miscellaneous metals contractor. From estimating, detailing and design, to Erection and close out, our projects are handled in-house allowing us to adapt quickly to your project needs. Our certified welders and craftsman have the ability to weld and fabricate steel, stainless steel and aluminum. Mid-State Metals LLC is centrally located in Orlando, Florida. We have the ability to ship our custom products throughout the United States. We also erect our products on job sites throughout the Southeastern US. Job Description We are seeking skilled and reliable Field Welders with current 3G/4G certifications and hands-on experience working with miscellaneous metals such as stairs, handrails and light structural components. The ideal candidate will be proficient in stick welding (SMAW), grinding, and interpreting blueprints and work instructions to complete installations with precision and professionalism. Responsibilities: Perform stick welding (SMAW) and other welding techniques on steel, aluminum and stainless steel materials. Grind railings, stairs and structural components according to specifications. Operate grinders, band saws and other standard ironworker tools. Follow safety procedures and ensure compliance with OSHA, Mid-State, and General Contractor regulations. Travel to job sites and adapt to various work schedules as needed. Lift and carry up to 75 pounds safely. Collaborate with team members to complete projects efficiently and on time. Qualifications Certified in 3G/4G welding is preferred (company will certify also). Proven experience in stick welding (SMAW), particularly with stairs, railings and light structures. Proficient in using grinders, band saws, and standard fabrication tools. Experience with aluminum and stainless welding preferred. Ability to read and follow blueprints. Familiarity with construction job sites and safety protocols. Must be dependable, team-oriented, and flexible with work hours and travel requirements. Additional Information All your information will be kept confidential according to EEO guidelines. Benefits: 401(k) 401(k) matching Dental insurance Flexible spending account Health insurance Health savings account Life insurance Paid time off Referral program Vision insurance Schedule: Monday to Friday Supplemental Pay: Bonus pay

Job Description This role is responsible for performing welding tasks, components, structures, and hardware. Responsibilities and Duties Required: As an Intermediate Welder for Shapes Precision Manufacturing, a leading manufacturer in the metals industry, you will play a crucial role in our dynamic production team. This position requires a skilled professional with a strong foundation in welding techniques and a commitment to quality and safety. You will be responsible for performing various welding tasks to meet production needs while maintaining the highest standards of workmanship. Read and interpret blueprints, drawings, and welding process specifications. Ensure all welds meet or exceed standards for quality and safety. Operate and maintain welding equipment, ensuring that it is in good working order. Collaborate with the fabrication team to plan and execute complex welding projects. Conduct inspections of welds to identify any defects and make necessary adjustments. Adhere to all safety protocols, including wearing appropriate protective gear. Participate in continuous improvement initiatives to enhance welding processes and techniques. Work with welding equipment and other hand tools to assemble components as instructed by Operation Process Sheets. Use fixtures to weld components and assemblies. Bench & straighten welded parts while maintaining the quality of the weldment. Determine weld heat pattern methods and sequences. Follow weld schedules and inspect per requirements. Operate sizer machines and automatic welder, develop programs, and optimize set-ups. Perform welding operations using various welding materials including Inconel, steel, stainless steel, aluminum, and exotic materials. Develop manual weld schedules to meet customer requirements. Weld Inconel, steel, stainless steel, aluminum and exotic materials. Recognize, understand, and use the correct fixtures required to build parts. Welds must pass X-Ray/Class A. Complete documentation accurately and scan on/off shop orders correctly. Maintain a clean and safe work environment and contribute to Shapes' 6S program and Lean concepts and initiatives. Comply with all quality policies, specifications, regulations, and instructions. Perform other related duties as required. Qualifications and Skills Required: High school diploma or equivalent; technical or vocational training in welding preferred. Must pass required qualifications test. Minimum of 5 years of experience in welding, with proficiency in various welding techniques. Certification in welding from a recognized institution is highly desirable. Welds must be able to pass X-Ray/Class A. Strong understanding of metallurgy and the properties of different metals. Ability to read and interpret technical documents and drawings. Good manual dexterity and hand-eye coordination. Excellent written and verbal communication skills are required. Ability to work independently or in a team environment. Ability to read and follow company processes, policies, weld symbols, blueprints and procedures. Ability to stay focused, adapt to change, and pay close attention to detail. Ability to perform mid-level math skills efficiently and accurately (including addition, subtraction, multiplication, and division using whole numbers, fractions, and decimals) Ability to use various inspection equipment. (Calipers, Micrometers, gage pins and height gages etc.) Ability to pass annual eye exam which is required to maintain certifications. Ability to multitask and work effectively and efficiently to shop order standards. Must be able to communicate and read English proficiently. Job, Working Conditions and Physical Requirements Physical Demands: Must be able to lift, move, transport and load items across the building up to 50 pounds at times. While performing the duties of this job, the employee is frequently required to remain in a stationary position and constantly re-position self to perform required tasks. May be required to work on slippery and uneven surfaces. May be exposed to physical hazards from moving equipment, heavy equipment, and machine parts. Specific coordination is necessary to operate computers and various pieces of equipment. May work in close proximity to others. Must wear protective clothing and gear as specified, including (but not limited to) steel toed shoes and protective eyewear. isual Acuity: Ability to pass annual eye exam which is required to maintain certifications. Visual acuity of 20/20 or corrected. Close vision, color vision, peripheral vision, and the ability to adjust focus. Ability to read computer screen and documents. Hearing Ability: Normal hearing or corrected to normal. Ability to monitor machine sounds to identify and diagnose changes to take appropriate action. Working Conditions: Factory environment. Occasional work outside normal business hours. High noise levels from operating machines. Physical hazards from moving equipment and machine parts. Breathing fumes, dust, and mist. Skin exposure to chemicals associated with manufacturing.

Job Description Why Join Us? L&L Metal Fabrication is a rapidly growing, family‑owned custom metal shop serving clients across Arkansas and beyond. We pride ourselves on quality craftsmanship, hands‑on mentorship, and a supportive team atmosphere. If you're passionate about precision welding and want to grow your skills on diverse, challenging projects, you'll fit right in! What You'll Do Perform TIG welding (primary) and MIG welding (secondary) on stainless steel (up to 18 ga) and mild steel components Read and interpret blueprints, shop drawings, and weld symbols to fabricate parts and assemblies (frameworks, tanks, ovens, handrails, etc.) Set up, operate, and maintain welding equipment and ancillary tools Conduct weld‑test samples and ensure each weld meets our strict quality and safety standards Troubleshoot joints, fit‑ups, and material defects for optimal weld integrity Collaborate with engineers and fabricators to improve processes, fixturing, and workflow Maintain a clean, organized work area and follow all company safety protocols Requirements What We're Looking For Experience: 3-5 years of hands‑on TIG welding experience in a production or custom‑fabrication environment MIG welding experience is a plus but not required Technical Skills: Blueprint/shop‑drawing literacy and strong attention to welding symbols Proven ability to produce clean, uniform beads on stainless steel (18 ga and thicker) Competence in setting proper amperage, travel speed, and shielding gas flow Personal Attributes: Self‑motivated, reliable, and able to complete tasks independently Strong hand‑eye coordination and visual acuity Physical stamina to lift up to 50 lbs regularly, and perform bending, kneeling, and climbing Commitment to safety, punctuality, and quality Benefits Competitive pay, based on experience Health, dental, and vision insurance options Paid time off and holiday pay Retirement Plan with company match Opportunities for professional development and cross‑training Modern, state‑of‑the‑art equipment and tooling

Job Description Shapes Precision Manufacturing is seeking a skilled and detail-oriented Resistance Welding Technician to join our manufacturing team in Palm Bay, Florida. This role is responsible for performing precision resistance welding operations to assemble components in strict compliance with engineering specifications, customer requirements, and AS9100D/NADCAP quality standards. The Resistance Welding Technician will work closely with production, quality, and engineering to ensure consistent delivery of safe, high-quality parts for our customers. Key Responsibilities Set up, adjust, and operate resistance welding machines (spot, seam) to join precision metal components. Read and interpret blueprints, technical drawings, process specifications, and work orders. Perform inspections of completed welds using measurement tools, gauges, and visual inspection techniques to verify conformance. Monitor welding processes and equipment operation, making necessary adjustments to maintain weld quality and efficiency. Develop and maintain weld schedules in accordance with NADCAP requirements, including proper documentation and audit readiness. Conduct routine maintenance on welding equipment and tools to ensure performance and minimize downtime. Document work performed in accordance with company procedures, quality requirements, and customer standards. Adhere to all company and customer safety policies, including proper use of PPE, lockout/tagout, and safe handling of aerospace materials. Maintain work areas in compliance with 5S and Lean Manufacturing practices. Collaborate with Quality, Engineering, and Production teams to resolve technical issues, recommend process improvements, and support continuous improvement initiatives. Qualifications Minimum of 3 years of resistance welding experience in aerospace or precision manufacturing. Demonstrated ability to weld materials such as aluminum, titanium, and stainless steel. Proficiency in reading and interpreting blueprints, weld symbols, and technical documentation. Knowledge of AWS D17.2 or equivalent aerospace welding standards preferred. Ability to develop and adjust weld schedules in accordance with NADCAP requirements. AWS Certified Resistance Welding Technician (CRWT) certification preferred; ability to qualify to customer-approved weld schedules required. Strong attention to detail, quality focus, and ability to follow established procedures. High school diploma or GED required; additional technical or vocational welding training preferred. Physical Requirements Ability to lift up to 50 pounds. Ability to stand, bend, and perform repetitive tasks for extended periods. Manual dexterity, good eyesight, and steady hand-eye coordination for detailed work. Work Schedule Must be available for assigned shifts, overtime, and weekend work as required to meet aerospace production schedules. Professional Conduct & Workplace Expectations Demonstrating respect, teamwork, and accountability in all interactions. Maintaining confidentiality of company and customer information. Adhering to company policies, including attendance, safety, and quality requirements. Following all applicable legal, ethical, and regulatory standards. Contributing to a positive work environment where safety, compliance, and continuous improvement are priorities. Compensation and Benefits Competitive salary and performance-based incentives. Comprehensive benefits package including medical, dental, vision, life insurance, and 401(k) with company match. Paid time off (PTO), paid holidays, and other leave programs. Opportunities for professional development, training, and certification support. Additional Information Employment decisions are made without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, genetic information, veteran status, or any other legally protected status. Employment with Shapes Precision Manufacturing is on an at-will basis. Nothing in this job posting or any other communication creates an employment contract or alters the at-will employment relationship. All offers of employment are contingent upon successful completion of a background check, reference check and drug screening, in accordance with applicable laws and company policy.

Mid-State Metals LLC provides custom fabrication of miscellaneous and architectural metals. Serving the commercial and industrial construction industry, Mid-State Metals has built a solid reputation for managing and completing an array of projects through our commitment to safety and customer service. Mid-State Metals is a true turn-key miscellaneous metals contractor. From estimating, detailing and design, to Erection and close out, our projects are handled in-house allowing us to adapt quickly to your project needs. Our certified welders and craftsman have the ability to weld and fabricate steel, stainless steel and aluminum. Mid-State Metals LLC is centrally located in Orlando, Florida. We have the ability to ship our custom products throughout the United States. We also erect our products on job sites throughout the Southeastern US. Job Description We are seeking skilled and reliable Field Welders with current 3G/4G certifications and hands-on experience working with miscellaneous metals such as stairs, handrails and light structural components. The ideal candidate will be proficient in stick welding, grinding, and interpreting blueprints and work instructions to complete installations with precision and professionalism. Responsibilities: Perform stick welding and other welding techniques on steel, aluminum and stainless steel materials. Grind railings, stairs and structural components according to specifications. Operate grinders, band saws and other standard ironworker tools. Follow safety procedures and ensure compliance with OSHA, Mid-State, and General Contractor regulations. Travel to job sites and adapt to various work schedules as needed. Lift and carry up to 75 pounds safely. Collaborate with team members to complete projects efficiently and on time. Qualifications Certified in 3G/4G welding is preferred (company will certify also). Proven experience in stick welding, particularly with stairs, railings and light structures. Proficient in using grinders, band saws, and standard fabrication tools. Experience with aluminum and stainless welding preferred. Ability to read and follow blueprints. Familiarity with construction job sites and safety protocols. Must be dependable, team-oriented, and flexible with work hours and travel requirements. Additional Information All your information will be kept confidential according to EEO guidelines. Benefits: 401(k) 401(k) matching Dental insurance Flexible spending account Health insurance Health savings account Life insurance Paid time off Referral program Vision insurance Schedule: Monday to Friday Supplemental Pay: Bonus pay